INSTRUCTION MANUAL. Stephenson Road Speedwell Industrial Estate Staveley Chesterfield S43 3JN
|
|
- Julia Reeves
- 5 years ago
- Views:
Transcription
1 INSTRUCTION MANUAL Stephenson Road Speedwell Industrial Estate Staveley Chesterfield S43 3JN Telephone: Fax: Website:
2 Contents 1. Thank you 2. Warning 3. Quick Start 4. Hints & Tips 5. Instructions 6. Safety 7. Maintenance 8. Contact 9. Troubleshooting 10. Additive Caution
3 1.Thank you Thank you for purchasing a Morclean Bin Wash machine. In addition to any training you have received this guide will provide you with instructions of how to set up and operate the machine. This bin wash guide and operator s manual can be used for all models including;
4 2. Warning Please read this entire manual before using this machine. This machine produces high-pressure water that can be dangerous if misused. Never direct the nozzle or lance towards any part of the body or face. We recommend use of protective clothing (PPE) including but not limited to waterproof jackets, ear defenders, gloves, glasses and/ or goggles when operating this machinery. Always close and fasten the catchment tray at all times.
5
6 3. Quick Start ñ Check hydraulic tank level and oil levels to engine. ñ Fill the water tank via the tank inlet. ñ Switch on the safety beacon. ñ When stationary switch on the engine as per operator instructions. ñ Before moving ensure the towing hitch is secure and locked. ñ Place the bin on the lift mechanism. ñ Use the switch to elevate the bins. ñ Operate the lance to wash the bins. ñ Wastewater will fall onto the catchment tray and filter. ñ Use the switch to lower the bin. ñ Take the bins off the lift mechanism. ñ Clear any debris from the catchment tray and bag it up. ñ At the end of the day drain off the main tank. ñ Connect the pump to a domestic water supply using the valve. ñ Wash the filters in the tray from front and behind while the catchment tray is elevated and clean the filter bowl. ñ Refill the main tank ready for the next day. ñ Clean the pump filters regularly. ñ Check your tyres and pressure weekly. ñ Check your battery level weekly
7 4. Hints & Tips Ensure the bin wash is on reasonably level ground while operating to ensure the bins can be lifted properly by the mechanism and the water can fall into the waste catchment tray. Keep the catchment tray and filter clear of debris and bag up any debris that falls into the catchment tray as you work. When preparing bins to be washed for the first time you may need to scrape any compacted debris out manually to avoid debris building up in the main filter. A mild sanitiser can be sprayed into the bins or added to the main water tank however always check that any detergent or sanitiser is suitable for use via the pump. A hand operated sanitiser spray can be used after washing and while the bins are still elevated to leave the bins smelling fresh.
8 5. Instruction Manual Engine You should refer to the owners manual for the engine fitted to this bin wash, especially with regards to; ñ Safety Information ñ Safe Operation ñ Precautions ñ Starting and stopping the engine ñ Servicing the engine ñ Lubrications and oil levels ñ Storage and transporting ñ Technical and consumer information Operating Procedure BEFORE STARTING Always carry out a visual check of the machine for damage and check all cables, hoses and fittings for general wear. Check all high pressure hoses for damage or excess wear, and visually inspect push buttons and switches. Fill the main tank (15) with clean water via the tank inlet (1) and ensure all filters are clear and free from debris. Check and clean all water filters regularly and stop operating the machine if filters become blocked.
9 1. Check the levels of oil in the engine before starting as per the operator s manual and check the hydraulic levels on the bin wash machine. 2. When operating the machine always have the safety beacon switched on (2) to ensure safety of operators on the highway. 3. Switch on the engine (3) as per operator s instructions. 4. When washing bins for the first time (for a newly established round) you may need to fore-scrape and remove heavy debris as per the hints and tips in this manual. 5. Place the bin on the lift mechanism (5). Depending on the levels and if the ground is sloping the lift mechanism may be slightly lower or higher. The bin(s) may need to be lifted slightly to meet the lift. 6. Using the main 2 way switch (6) elevate the bins until they reach the tip position and always release the switch when the bin is at the uppermost point. 7. Operate the lance (8) to wash the bins, wash quickly moving the lance to remove and loosen debris, which should fall into the catchment tray. 8. Once the bin is clean you can spray sanitiser while it is still elevated, then lower the bin using the 2-way switch (6). Once lowered to the ground the bins can be lifted off the bin mechanism. (5) Always release the switch once the bins are lowered. 9. Periodically you should clean any debris from the main catchment tray (9) and bag it up to keep the main filter clean from plastic bags or larger debris that will prevent the escape of water. 10.The water within the tank (15) will be recycled during the day and on the normal round the water should last at least all day. 11.At the end of the day the main tank should be emptied into a suitable disposal point which is usually a mains foul drain as per the Environment Agencies PPG13 or PPG3 guidelines. Always check with your local water or sewer provider to ensure you are disposing of waste water legally and safely. 12.To wash the main filters connect the pump to a domestic hose pipe water supply using the valve (11). This means fresh water will be used through the pump. Wash the filters from the front and behind while the main catchment tank (9) is elevated. This process should be carried out each day after use. You should also clean the filter bowl (12) and you can refill the main tank (15) ready for the next day.
10 6. Safety Always think safety for yourself, motorists and the public and put safety first. Always wear goggles, ear defenders and a face mask when using the machinery. The machine produces high pressure water which can be dangerous if misused. Never point the lance in the direction of the machine or another person. Never use the lance during an electrical storm. Have the trailer parts serviced by a specialist trailer engineer at least once per year. Service in accordance with recommendations (normally service every 4 months). Regularly check the oil levels on the gearbox and pump and service in accordance with the manufacturer s recommendations (normally service Never allow the lance to come into contact with electrical cables. Always secure the lance onto its locating points before driving off. Always switch on the warning beacon when working. Clear any loose debris from the collection tray before driving off. Ensure the collection tray/lid is in its correct position and locked down. Always ensure that the bin lift is clear before operating. Do not move the machine when full of water. (The shifting of water could destabilise the unit causing it to tip up). every 4 months). All operators must be trained to use the pressure washer in accordance with the manual.
11 All risk assessments should be carried out for each water jetting operation before commencement of works. We recommend that all operators should maintain a log book of use of the jetting unit. The information can be relatively simple and completed on a daily basis and of sufficient information to provide useful operating data. All maintenance must only be carried out by authorised repair personnel. The pressure washer must not be used when there is a clear fault or damage to it. Do not use the pressure washer while tired or under the influence of alcohol or drugs. Heat exchange exhausts emit hot fumes, keep face, body and hands clear; ensure it is clear of any obstruction at all times. Always ensure you safely route all hoses to the mains cable to minimise trip hazards and keep them away from the jetting area. All cleaning products used must be in accordance with your MSDS sheet (Material Safety Data Sheet). Never attempt to start the pump if there is a possibility that there is freezing in any part of the system, Never start the pump if any filtration devices have been removed. You may experience a kick back from the gun. Hold the gun and lance with both hands at all times during cleaning operation. The pressure washer must never be run with the cover open. The pressure washer must be used in open air, not insure a building and at least 1m away from any building. Always wear hi-visibility clothing while on the public highway. Detergents and Sanitisers While most are of low ph values and suitable for use, you should check that any chemicals used with this machine are suitable and will not damage the pump etc. If in doubt contact Morclean.
12 7. Maintenance Clear any loose debris from the collection tray. Regularly check the oil levels on the gearbox and pump and service in accordance with the manufacturer s recommendation (normally service every 4 months). Keep the lifting mechanisms well lubricated. With the wheelie bin wash and lift you must lubricate and check for wear and make sure the bolts are tight on the sprockets every 4 months. The machine carries a 12 months manufacturers parts warranty as per our warranty terms. The unit should be serviced by an authorised service agent every 4 months otherwise this warranty could be invalid. Warranty Terms 12 (twelve) months warranty covering faulty components and materials from date of purchase. Hose, gun & lance are only covered for initial 7 days. Warranty does not cover damage caused by frost, fair wear and tear, chemicals, other than those recommended by Morclean, misuse or modification not authorised by Morclean. Misuse including repairs or modification or any service activity carried out other than by Morclean registered engineers. Warranty only valid if signed by both the dealer and company stamp dated and all details complete. Customer copy must be produced to make a warranty claim, Customer must complete and return dealers copy within 7 days of purchase to ensure warranty cover. Warranty cover is only applicable if machine is serviced by Morclean or an authorised and approved engineer.
13 8. Contact Details Morclean Ltd, Stephenson Road Speedwell Industrial Estate, Staveley, Chesterfield S43 3JN Tel no Fax no Remember! Regular servicing cuts running costs. Ask about our packages or service contracts. Troubleshootin
14 g Flashing beacon does not operate Main tray will not elevate Bin lift mechanism will not lift Bin mechanism will not lower No pressure from lance Pulsating pressure from lance Uneven pressure for spray pattern Engine will not start Check switch is on, battery power and secondary plug is attached to vehicle. The lift is fitted with hydraulic rams which will operate slowly, do not force. Check battery power and charge and levels of hydraulic oil. Check battery power and charge and levels of hydraulic oil. DO NOT FORCE THE MECHANISM DOWN. Check water tank is full. Check filters and filter bowl is clean (see diagnostic notes below). Check filters and water tank or check for debris in lance nozzle. Check for debris in lance nozzle and clean if necessary. Check petrol and oil levels, if in doubt refer to Operators Manual. Always pull trigger to release trigger before starting. No pressure? Diagnostics Advice (Elimination) If machine has no pressure but the engine is running you can check a few things first. 1. Disconnect the main high-pressure hose from the pump. If water flows from here then you know the pump is operating. 2. If the machine still does not operate then switch off and disconnect the lance from the trigger. If water flows from here then you know the pump is operating. 3. If the machine still does not operate then it is likely the nozzle (tip) is blocked. DO NOT LOOK AT THE NOZZLE FROM THE FRONT TO CHECK. Stop the machine and remove the nozzle to clean out any debris. A blocked nozzle is one of the most common apparent faults. IF THE FAULT PERSISTS OR THERE ARE ANY OTHER APPARENT FAULTS WITH THE MACHINE THAT YOU CANNOT RECTIFY THEN STOP AND CALL TO SEEK ADVICE.
OPERATION & MAINTENANCE INSTRUCTIONS
WARNING Read the instructions before using the machine PETROL DRIVEN POWER WASHER MODEL NO: TIGER1700 PART NO: 7320054 OPERATION & MAINTENANCE INSTRUCTIONS LS0511 2 INTRODUCTION Thank you for purchasing
More informationCEMENT MIXERS & MACHINERY USER & WARRANTY GUIDE. Electric and Petrol Models
CEMENT MIXERS & MACHINERY Electric and Petrol Models USER & WARRANTY GUIDE AMES TRUE TEMPER AUSTRALIA PTY LTD. TRADING AS WESTMIX VICTORIA HEAD OFFICE: Level 1, 660 Doncaster Road, Doncaster, Victoria
More information12v / 24v Diesel Transfer Pump Kit
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationHOT WASHER MODEL NO: KING 125 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS1009
HOT WASHER MODEL NO: KING 125 PART NO: 7320170 OPERATION & MAINTENANCE INSTRUCTIONS LS1009 INTRODUCTION Thank you for purchasing this Hot Washer. This machine is a portable, high pressure power washer,
More informationPETROL DRIVEN POWER WASHER
WARNING: Read these instructions before using the machine PETROL DRIVEN POWER WASHER MODEL NO: TIGER 2500/2900 PART NO: 7320055/7320056 OPERATION & MAINTENANCE INSTRUCTIONS LS0513 INTRODUCTION Thank you
More informationRESTWELL RISE & RECLINE ARMCHAIRS LARS AND SVEN - OWNER S HANDBOOK MODEL DESCRIPTION
RESTWELL RISE & RECLINE ARMCHAIRS LARS AND SVEN - OWNER S HANDBOOK CONTENTS 1. Introduction 2. Model Description 3. Parts Description 4. Personal Safety 5. Installation Instructions 6. Operating Instructions
More informationCEMENT MIXERS & MACHINERY USER & WARRANTY GUIDE. Electric and Petrol models
CEMENT MIXERS & MACHINERY Electric and Petrol models USER & WARRANTY GUIDE AMES TRUE TEMPER AUSTRALIA PTY LTD TRADING AS WESTMIX VICTORIA HEAD OFFICE: Level 1, 660 Doncaster Road, Doncaster, Victoria 3108
More informationWARRANTY. Illustration
WARRANTY This product is guaranteed against defects for a period of 12 months from date of purchase. This warranty is provided by Super Cheap Auto Pty Ltd ACN 085 395 124 (Supercheap Auto) of 751 Gympie
More information80 Litre Suction Oil Drainer With Inspection Chamber
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationWARRANTY. Illustration
WARRANTY This product is guaranteed against defects for a period of 12 months from date of purchase. This warranty is provided by Super Cheap Auto Pty Ltd ACN 085 395 124 (Supercheap Auto) of 751 Gympie
More informationIMPORTANT INSTRUCTIONS FOR OPERATION & MAINTENANCE OF
IMPORTANT INSTRUCTIONS FOR OPERATION & MAINTENANCE OF CONVEYORS EASIKIT 300 EASIKIT 450 EASIKIT 600, 900, 1200 & 1500 The manufacturer does not accept responsibility for any loss, damage to other equipment,
More informationOWNER S OPERATING MANUAL
OWNER S OPERATING MANUAL MIG 100 GASLESS WELDER TABLE OF CONTENTS Page Safety instructions 3-4 MIG Welders 5 Welder Information 5 Gasless welder set up 6 Operation 6-10 Troubleshooting Guide 11-12 Spare
More informationKESSEL-Grease Separator Under sink
INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE KESSEL-Grease Separator Under sink Order Number 93025.00/US Product advantages Compact structure fully adjustable inlet 290 to 420 260 350 release
More informationOWNER S MANUAL Soco TS1200R Soco TS800R
OWNER S MANUAL Soco TS1200R Soco TS800R Version 1.0 May 2017 Congratulations on purchasing your Soco electric motorcycle. We wish you an enjoyable and safe riding experience. For your safety and comfort,
More informationOWNER S MANUAL Soco TS1200R Soco TS800R
OWNER S MANUAL Soco TS1200R Soco TS800R Congratulations on purchasing your Soco electric motorcycle. We wish you an enjoyable and safe riding experience. For your safety and comfort, we recommend that
More informationOWNER S MANUAL FOR THE. SPRAY-ON 200 range
OWNER S MANUAL FOR THE SPRAY-ON 200 range C-Dax Ltd PO Box 1010, 145 Harts Road Tiritea, Palmerston North Ph:06 354 6060 Fax:06 355 3199 E-Mail: sales@c-dax.co.nz www.c-dax.com SAFETY PRECAUTIONS Warnings
More informationPOWERWASHER OPERATING & MAINTENANCE INSTRUCTIONS. Models: PLS130AB & PLS130AH - PLS200AB & PLS200AH DLS200AL & PLS160AH
POWERWASHER Models: PLS130AB & PLS130AH - PLS200AB & PLS200AH DLS200AL & PLS160AH OPERATING & MAINTENANCE INSTRUCTIONS 0108 CONTENTS Guarantee... 3 Specifications... 3 Safety Precautions... 4 Features...
More information150 Gallon 3- Point Hitch Sprayer
150 Gallon 3- Point Hitch Sprayer Model #: K3PTH150BN22 User Manual Read this manual for complete instructions Model #: K3PTH150BN22 Table of Contents Warranty... 3 General Safety Information... 3 Hazardous
More informationHAYES SPRAYING P/L SHIELDED SPRAYER OPERATION MANUAL
HAYES SPRAYING P/L SHIELDED SPRAYER OPERATION MANUAL October 2005 1. CONTENTS 1 WARRANTY POLICY 2 PRODUCT INFORMATION 2 SHIPPING INFORMATION 2 SERIAL NUMBERS 2 SPECIFICATIONS 3 SAFETY INSTRUCTIONS 3 OPERATORS
More information3 Petrol Water Pump. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationExcavator Forks. Introduction. Important Notes. Key Benefits. User Guide
User Guide Excavator Forks Introduction The Conquip Excavator Forks attachment is designed to enable an excavator to lift palletised material. This is especially useful if space is restricted and budget
More informationOMEGA. Separator Units. Standen Engineering Limited. Hereward Works, Station Road, Ely, Cambridgeshire. CB7 4BP England.
OMEGA Separator Units Standen Engineering Limited. Hereward Works, Station Road, Ely, Cambridgeshire. CB7 4BP England. Tel: 01353 661111 www.standen.co.uk Fax: 01353 662370 IMPORTANT This operator s handbook
More informationOPERATION & MAINTENANCE INSTRUCTIONS
10 TONNE HEAVY DUTY LONG CHASSIS TROLLEY JACK MODEL NO: CTJ10GLS PART NO: 7623095 OPERATION & MAINTENANCE INSTRUCTIONS LS0915 INTRODUCTION Thank you for purchasing this CLARKE 10 Tonne Heavy Duty Long
More informationSIP Direct Drive Oil-Lube Air Compressors - Operating & Maintenance Instructions
SIP Direct Drive Oil-Lube Air Compressors - Operating & Maintenance Instructions Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.
More information3.25 Ton Heavy Duty Floor Jack
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationNK TRAILER. Operating Manual. Trailer. Hilomast LLC 402 Chairman Court Debary FL 32713
NK TRAILER Trailer Operating Manual Hilomast LLC 402 Chairman Court Debary FL 32713 Tel: +1 (386) 668-6784 Fax: +1 (386) 668-6794 Email: sales@hilomast.com Website: www.hilomast.com 0 Contents Safety Information...
More information15-GALLON OIL DRAIN DOLLY WITH 12 VOLT PUMP
15-GALLON OIL DRAIN DOLLY WITH 12 VOLT PUMP OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More information8GAL STEEL OIL DRAIN
8GAL STEEL OIL DRAIN OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information50 Gallon Skid Sprayer
50 Gallon Skid Sprayer Model #: KS50P5 User Manual Read this manual for complete instructions Model #: KS50P5 Table of Contents Warranty... 3 General Safety Information... 3 Hazardous Substance Alert...
More informationVSM480. Instruction Manual VARIABLE SPEED MIXER. Read instructions before operating this tool.
VSM480 VARIABLE SPEED MIXER Instruction Manual Read instructions before operating this tool. Important Please read these operating and safety instructions carefully and completely. For your own safety,
More informationAir Compressor. Operating & Maintenance Instructions 1110 ENGINE DRIVEN - 1 -
Air Compressor ENGINE DRIVEN Operating & Maintenance Instructions 1110-1 - Read these safety instructions before using the equipment. INTRODUCTION Thank you for purchasing this Clarke portable compressor.
More informationMODEL NUMBER: BD-132 USER GUIDE
Airbrush MODEL NUMBER: BD-132 USER GUIDE WEBSITE: EMAIL: www.airbrushheaven.co.uk enquiries@airbrushheaven.co.uk 1 YEAR WARRANTY Contents 1. Welcome Section 2. General Information & Safety Instructions
More information3 Ton Trolley Jack. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More information250W PUDDLE PUMP WITH AUTO SENSOR MODEL NO: PSP105
250W PUDDLE PUMP WITH AUTO SENSOR MODEL NO: PSP105 PART NO: 7230693 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0917 -- iss 3 INTRODUCTION Thank you for purchasing this CLARKE 250W Puddle
More informationDEMON TEMPEST RANGE Tempest 1 Tempest 2 Tempest 3 Tempest 4
DEMON TEMPEST RANGE Tempest 1 Tempest 2 Tempest 3 Tempest 4 A Declaration of Conformity (E.H.S.R.) We, Demon International Limited of Abbots Close, Lee Mill Industrial Estate, Ivybridge, Devon PL21 9GA
More informationPrinted: Doc-Nr: PUB / / 000 / 00
ORIGINAL OPERATING INSTRUCTIONS Hilti HTE-P 33 dispenser It is essential that the operating instructions are read before the tool is operated for the first time. Always keep these operating instructions
More informationpressure washer 130bar 420ltr/hr 2.4hp petrol
instructions for pressure washer 130bar 420ltr/hr 2.4hp petrol model no: PWM1300 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
More informationUser Manual of Bagibike Electric Bicycles
User Manual of Bagibike Electric Bicycles Model: Bagibike B16. http://www.bagibike.com Page 1 FOREWORD The following operation manual is a guide to assist you. This manual is not a complete document on
More informationPRESSURISED SANDBLASTER
PRESSURISED SANDBLASTER MODEL NO: CPSB200 PART NO: 7640128 OPERATION & MAINTENANCE INSTRUCTIONS LS1211 INTRODUCTION Thank you for purchasing this Clarke Pressurised Sandblaster. Before you try to use this
More informationINSTRUCTIONS FOR: CORDLESS LITHIUM-ION IMPACT WRENCH 1/2"Sq DRIVE 650Nm, 2 BATTERIES. MODEL No: CP SAFETY
1. SAFETY INSTRUCTIONS FOR: CORDLESS LITHIUM-ION IMPACT WRENCH 1/2"Sq DRIVE 650Nm, 2 BATTERIES MODEL No: CP3005 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product
More informationTBE-700. Operation, Safety and Maintenance Manual. Stainless Steel Weld Cleaning System. Ensitech Pty Ltd
Stainless Steel Weld Cleaning System Operation, Safety and Maintenance Manual TBE-700 TBE-700 Instruction Manual Oct 2013 (USA) FOREWORD FOREWORD This manual is a very important tool! Keep it with the
More information2-1/4 Gallon Sprayer
2-/4 Gallon Sprayer 94008 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All rights
More informationMODEL NUMBER: BD-116C USER GUIDE
Airbrush MODEL NUMBER: BD-116C USER GUIDE WEBSITE: EMAIL: www.airbrushheaven.co.uk enquiries@airbrushheaven.co.uk 1 YEAR WARRANTY Contents 1. Welcome Section 2. General Information & Safety Instructions
More informationORIGINAL INSTRUCTIONS
OPERATION & MAINTENANCE INSTRUCTIONS CBB200 Shown here BUFFER/POLISHER MODEL NO: CBB150, CBB200 PART NO: 6500485, 6500490 ORIGINAL INSTRUCTIONS LS0818 - ISS 1 INTRODUCTION Thank you for purchasing this
More informationOWNER S MANUAL FOR THE PROTECTEAT TEAT SPRAY SYSTEM
OWNER S MANUAL FOR THE PROTECTEAT TEAT SPRAY SYSTEM C-Dax Ltd PO Box 1010, 145 Harts Road Tiritea, Palmerston North Ph:06 354 6060 Fax:06 355 3199 E-Mail: sales@c-dax.co.nz www.c-dax.co.nz PROTECTEAT TEAT
More informationOPERATION & MAINTENANCE INSTRUCTIONS
750W SUBMERSIBLE PUMP WITH BUILT-IN FLOAT SWITCH MODEL NO: PSV5A PART NO: 7236046 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0917 iss 3 INTRODUCTION Thank you for purchasing this CLARKE
More informationCompact Easy Rollator M66739
User Instructions Compact Easy Rollator M66739 Maximum Safe Working Load 21st 135kg Please ensure these Instructions are fully read and understood before using this equipment. Retain these instructions
More informationLOG CHOP. Hydraulic Wood Guillotine. Owners Illustrated Instruction Book & Parts List
LOG CHOP Hydraulic Wood Guillotine Owners Illustrated Instruction Book & Parts List Grovebury Road, Leighton Buzzard, Bedfordshire. LU7 4UX. UK. Tel:01525 375157. Fax:01525 385222. Email: enquires@brownsagricultural.co.uk
More informationRescue Pac. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference
Please dispose of Packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationContents. Overview. Safety Instructions. Before Installation. Installation. Operation. Maintenance. Replacement Parts. System Specifications 8 01
PrintPRO Universal Contents Overview 1 01 02 03 Overview of your extraction system (front) Overview of your extraction system (back) Overview of the Control Panel Safety Instructions 2 01 Important safety
More informationHEAVY DUTY WHEEL LIFTER
OWNER S MANUAL PRODUCT CODE: BTWD750 HEAVY DUTY WHEEL LIFTER Capacity Lift Arm Lifting Tilt Range Dimensions Net (Max) Spread Range (degrees) (L x W x H) Weight 750kg 533-635mm 60-275mm -2.5-10mm 787x1092x895mm
More informationMaintenance GENERAL INFORMATION
GENERAL INFORMATION Protect the environment We must all play our part in protecting the environment. Correct vehicle usage and disposal of waste cleaning and lubrication materials are significant steps
More informationTANKERS OPERATING & SAFETY INSTRUCTIONS FOR SPARE PARTS GO TO
TANKERS OPERATING & SAFETY INSTRUCTIONS FOR SPARE PARTS GO TO WWW.MARSHALL-TRAILERS.CO.UK FOR MODELS: ST1200, ST1400, ST1600, ST1800, ST2000, ST2300, ST2550 CHARLES J. MARSHALL (ABERDEEN) LTD CHAPEL WORKS,
More informationHydraulic Bottle Jack Manual
Before using this product, read and understand this manual. Follow all Safety and Operating instructions. Failure to do so may result in severe personal injury and/or property damage. Save this manual
More informationSafe Work Instructions Tools and Equipment
Safe Work Instructions Version 1.00! 23 March 2015 Table of Contents PURPOSE AND SCOPE...4 HAND TOOLS...6 ELECTRIC POWER TOOLS...7 PETROL POWERED TOOLS...9 PORTABLE ELECTRICITY GENERATOR...12 PNEUMATIC
More informationAFS-GC90 MAGNESIUM OXIDE SPREADER. Operators Manual
AFS-GC90 MAGNESIUM OXIDE SPREADER Operators Manual Reese Engineering Ltd Palmerston North, New Zealand Telephone: +64 6 357 9323 Facsimile: +64 6 354 3155 www.reeseagri.com 2 Contents OWNER INFORMATION...
More informationPressure Roller with 24-inch Fixed Extension - For application of architectural paints and coatings -
Instructions Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 311082D Pressure Roller with 24-inch Fixed Extension - For application of architectural
More informationPro Gun (Model: UCpro and UCPro Plus)
Undercoating/Rustproofing Pro Gun (Model: UCpro and UCPro Plus) Professional Undercoating and Rustproofing gun designed to apply protective coatings such as waterborne and solvent based under coatings,
More information2 TONNE TROLLEY JACK
2 TONNE TROLLEY JACK Model No: CTJ2000LP PART NO: 7623065 OPERATING & MAINTENANCE INSTRUCTIONS GC01/12 INTRODUCTION Thank you for purchasing this CLARKE Trolley Jack. Before attempting to use this product,
More informationPro Booster 802Li. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationF 167/94 07/ GM-
5.956 172 F 167/94 07/95 1750 GM- 1750 GM 3 4 2 5 1 16 7 6 8 9 10 15 11 14 12 13 9 1. Unit Start-Up 1750 GM 1 Spray lance with pressure control 2 Spray lance extension 3 Hand gun 4 Safety catch 5 Handle
More informationOperating instructions ErgoPack 600 E
Operating instructions ErgoPack 600 E Operation of the device is only permitted if the operating instructions have been carefully read and understood before use! Declaration of conformity EU declaration
More informationSBCNNS. Abrasive Blast Cabinet Assembly & Operating Instructions
SBCNNS Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationPRESSURISED SANDBLASTER MODEL NO: CPSB200B
PRESSURISED SANDBLASTER MODEL NO: CPSB200B PART NO: 7640134 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0218 ISS 1 INTRODUCTION Thank you for purchasing this CLARKE Pressurised Sandblaster.
More informationOPERATIONAL INSTRUCTIONS
OPERATIONAL INSTRUCTIONS PRINTPro Universal FUME EXTRACTION UNITS July 2009 Page 1 TABLE OF CONTENTS TABLE OF CONTENTS... 2 SAFETY INSTRUCTIONS... 3 Symbols used... 3 Electrical safety... 3 Dangers to
More information06/15. Hip Spica Chairs. INSTRUCTIONS FOR USE Multi-Adj / Portable / STEPS. Code / 5596 / 5580
06/15 Hip Spica Chairs INSTRUCTIONS FOR USE Multi-Adj / Portable / STEPS Code 5585-5587 / 5596 / 5580 SECTIONS PAGE START 1.0 MULTI ADJUSTABLE HIP SPICA 2 2.0 PORTABLE HIP SPICA 13 3.0 STEPS HIP SPICA
More informationPRESSURISED SANDBLASTER MODEL NO: CPSB100B PART NO: OPERATION & MAINTENANCE INSTRUCTIONS
PRESSURISED SANDBLASTER MODEL NO: CPSB100B PART NO: 7640133 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0218 ISS1 INTRODUCTION Thank you for purchasing this CLARKE Pressurised Sandblaster.
More informationUser Manuel. Titan Hummer XL
User Manuel Titan Hummer XL Dear User, Tzora Active Systems Ltd. thanks you for choosing the Titan Hummer-XL and wishes you safe and enjoyable journeys. For proper operation and to maintain the scooter
More informationPolicy Sponsor: Assistant Vice President. Responsible Unit: Facilities Management
Policy Sponsor: Assistant Vice President Approval Date: January 2010 Gas Powered Pole Pruners/Saws Safe Work Instructions Responsible Unit: Revisions: Service: Environmental Services Shop: Grounds and
More informationOPERATION & MAINTENANCE MANUAL
Aussie Pumps Cougar MkII Pressure Blaster OPERATION & MAINTENANCE MANUAL Feb 2012 IMPORTANT: TO REDUCE RISK OF INJURY, READ OPERATING INSTRUCTIONS CAREFULLY BEFORE USING EQUIPMENT Aussie Pumps Feb 2012
More informationSUBMERSIBLE WATER PUMP
SUBMERSIBLE WATER PUMP MODEL NO: CSV1A, CSV2A PART NO: 7230582, 7230602 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS 05/14 iss 4 INTRODUCTION Thank you for purchasing this CLARKE Submersible
More informationPORTABLE Q-CATCH 86 SERIES CHUTE & ALLEY PRODUCT MANUAL arrowquip.com
PORTABLE Q-CATCH 86 SERIES CHUTE & ALLEY PRODUCT MANUAL 1-877-275-6075 cs@arrowquip.com arrowquip.com CONTENTS Safety Precautions 1 Risk Assessment 2 Q-Catch 86 Series Head Gate Assembly 3 Operating the
More informationV-9B Battery Tub Vacuum Operating Instructions
V-9B Battery Tub Vacuum Operating Instructions Barnborough Ltd. 40-42 Rushey Lane, Birmingham, B11 2BL Tel: 0121 706 5771 Fax: 0121 708 1052 email: sales@victorfloorcare.com www.victorfloorcare.com Specification
More informationFMT6079 HVLP Pressure Feed Spraygun. Product Instruction Manual Please keep this manual safe for future reference
_Product Instructions 26/09/2014 16:08 Page 1 HVLP Pressure Feed Spraygun Product Instruction Manual Please keep this manual safe for future reference fastmovertoolsuk.com/mp T: +44 (0)1582 661993 E: sales@fastmovertoolsuk.com
More informationBELT GRINDER INSTRUCTION MANUAL READ CAREFULLY AND UNDERSTAND THESE INSTRUCTIONS BEFORE USE.
www.industrialtool.com.au BELT GRINDER INSTRUCTION MANUAL READ CAREFULLY AND UNDERSTAND THESE INSTRUCTIONS BEFORE USE. LIMITED WARRANTY Industrial Tool & Machinery Sales (hereinafter refered to as ITMS)
More informationOWNER S MANUAL PRODUCT CODE: 2006T
Jul-18 Product Code: 2006T OWNER S MANUAL PRODUCT CODE: 2006T HYDRAULIC PIPE BENDER 12,000KG Model Capacity Bending Die No of Attachments 12,000kg 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" 6 Made in China to
More informationMODEL CJ-95 CoilJet Portable HVAC Coil Cleaning System
MODEL CJ-95 CoilJet Portable HVAC Coil Cleaning System OPERATING AND MAINTENANCE INSTRUCTIONS CJ-95 Manual 2009 All Rights Reserved 07/2009 Table of Contents Warranty... 1 Important Safety Instructions...
More informationinstructions for roadstart units
instructions for roadstart units model no: RS1.V5, RS102.V4, RS103.V3 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
More informationINSTRUCTIONS FOR: BROADCAST / SPOT SPRAYERS. MODEL No's: SS60, SS98 1. SAFETY INSTRUCTIONS 2. INTRODUCTION
INSTRUCTIONS FOR: BROADCAST / SPOT SPRAYERS MODEL No's: SS60, SS98 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
More informationHUGH CRANE. SOUTH WALSHAM ROAD, ACLE, NORWICH, NORFOLK, NR13 3ES TEL: FAX:
HUGH CRANE Cleaning Equipment Limited SOUTH WALSHAM ROAD, ACLE, NORWICH, NORFOLK, NR13 3ES TEL: 01493 750072 - FAX: 01493 751854 - www.hughcrane.co.uk FS0962 OPERATOR INSTRUCTION MANUAL COMMANDO 500P For
More informationOperator's Manual. VC-60 & VC-60 Plus Harper Industries, Inc. 7/03 Part No
Operator's Manual VC-60 & VC-60 Plus 2003 Harper Industries, Inc. 7/03 Part No. 970066 Thank you for purchasing a Harper/Goossen Verti-Cutter. As with all Harper/Goossen products, the Harper/Goossen Verti-Cutter
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL COLD WATER PETROL WATER BLASTERS Read Safety & Operating Instructions Before Commencing Operation THESE INSTRUCTIONS MUST BE READ AND ADHERED TO BEFORE OPERATING THIS MACHINE.
More informationWARRANTY. Illustration
WARRANTY This product is guaranteed against defects for a period of 12 months from date of purchase. This warranty is provided by Super Cheap Auto Pty Ltd ACN 085 395 124 (Supercheap Auto) of 751 Gympie
More informationCROMMELINS COMPACTORS
CROMMELINS COMPACTORS OPERATION & INSTRUCTION MANUAL Thank you for your selection of a CROMMELINS Compactor. This Operation Manual explains its use, installation, checking and maintenance. We highly recommend
More information18- G A L L O N O I L D R A I N D O L LY OWNER S MANUAL
18- G A L L O N O I L D R A I N D O L LY OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationEnvironmental Procedures
Airside Operational Instruction TBA Airside Operational Instruction 24 Content 1. Aircraft Washing and Use of Detergent-Cleaning Materials 2. Accidental Fuel, Oil or Chemical Spillages 3. Aircraft De-Icing
More informationHEAVY DUTY ADJUSTABLE TRAILER DOLLY WITH DUAL CASTERS
HEAVY DUTY ADJUSTABLE TRAILER DOLLY WITH DUAL CASTERS OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules
More informationHD18F2M1.
HD18F2M1 www.blackanddecker.com 3 2 1 5 A 4 5 B 4 7 10 9 C 4 6 D 4 8 1 11 12 E 2 F 3 2 G H 13 I 14 13 14 K 3 J 3 L M 16 15 4 Intended use Your Black & Decker hand held vacuum cleaner has been designed
More informationPROFESSIONAL CORDLESS IMPACT SCREWDRIVER
PROFESSIONAL CORDLESS IMPACT SCREWDRIVER Model CIS00 Part No 4500625 OPERATING & MAINTENANCE INSTRUCTIONS GC0309 INTRODUCTION Thank you for purchasing this CLARKE Impact Screwdriver. Before attempting
More informationPETROL POWER WASHER MODEL NO: PLS195, PLS265 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: , LS0616
PETROL POWER WASHER MODEL NO: PLS195, PLS265 PART NO: 7330360, 7330365 OPERATION & MAINTENANCE INSTRUCTIONS LS0616 INTRODUCTION Thank you for purchasing this CLARKE Petrol Power Washer. Before attempting
More informationOPERATION & MAINTENANCE INSTRUCTIONS
400W SUBMERSIBLE PUMP WITH FOLDING BASE AND FLOAT SWITCH MODEL NO: PSV6A PART NO: 7230695 OPERATION & MAINTENANCE INSTRUCTIONS LS0315 INTRODUCTION Thank you for purchasing this CLARKE 400W Submersible
More information3-TONNE GARAGE JACK OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: CTJ3000GB PART NO: ORIGINAL INSTRUCTIONS
3-TONNE GARAGE JACK MODEL NO: CTJ3000GB PART NO: 7623032 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1216 2 INTRODUCTION Thank you for purchasing this CLARKE Garage Jack. Before attempting
More informationOperating & Maintenance Manual
Operating & Maintenance Manual HOT WATER PETROL HIGH PRESSURE CLEANER SW15200PE AND SW21200PE Made By : Spitwater Australia 953 Metry St North Albury, NSW, Australia WARNING: FAILURE TO FOLLOW OPERATING,
More information100 Gallon Skid Sprayer
100 Gallon Skid Sprayer Model #: KS100P17 User Manual Read this manual for complete instructions Model #: KS100P17 Table of Contents Warranty... 3 General Safety Information... 3 Hazardous Substance Alert...
More informationMODEL 565CKG Operating and Assembly Manual Midwest Equipment Manufacturing, Inc Serum Plant Road Thorntown, IN 46071
MODEL 565CKG Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 11-20-14 SAFETY RULES Remember, any power equipment can cause injury if operated
More informationOperating and Assembly Manual
Model 470-/H/PRO/IC Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 11-11-11 SAFETY RULES Remember, any power equipment can cause injury if
More information18 GAUGE FLOORING STAPLER. Models: /13
18 GAUGE FLOORING STAPLER Models: 7560 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.
More informationEasy to choose, even easier to restock
s s -why are they such a good idea? A spill can happen at any time. So if you haven t got the kit to clean it up close at hand then things can get really messy, really quickly! It s also worth noting,
More information15,000kg HYDRAULIC BOTTLE JACK
Product Code: 2013 OWNER S MANUAL PRODUCT CODE: 2013 15,000kg HYDRAULIC BOTTLE JACK Lifting Capacity 15,000kg Max. Lifting Height 447mm Min. Lifting Height 227mm Hydraulic Lift 125mm Screw Adjustment 70mm
More informationX-Tractor Series. Cutters INSTRUCTION MANUAL
INSTRUCTION MANUAL X-Tractor Series Cutters PRINTED IN USA 0305 PART NO. 159R141 Rev. 02 2005 Hale Products, Inc. Hale Products, Inc. reserves the right to make changes at any time, without notice or obligation,
More information