Supply plus delivery pressure must not exceed the admissible internal pump pressure.
|
|
- Godwin Cameron King
- 5 years ago
- Views:
Transcription
1 Vertical High-Pressure Centrifugal Pump Series CVP Application For handling pure water and condensates. The fluids to be pumped must not contain any abrasive particles nor chemically attack the pump materials. Other fluids to be pumped on request. Main fields of application In water supply, booster and fire extinguishing plants, in heating, cooling and circulating systems, for boiler feeding and pumping of condensates, as car or tank washing pump and as washing pump in concrete mixing plants. Design Vertical, two- or multi-stage high-pressure centrifugal pump of the segmental type of construction with exchangeable impellers and diffusers as well as wearing plates. Suction casing, wearing plates, diffusers and delivery casing are held together by internal casing connecting bolts. The diffusers made of special plastic (Ryton) and wearing plates of Perbunan with metal reinforcement ensure an optimum sealing of the parts. The axial thrust is taken by the motor bearing. The connection pump/motor shaft is by a non-flexible clamp coupling. The delivery casing is at the same time the bearing bracket taking the driving motor, the suction casing is designed as pump foot. The corrosion-resistant materials provided for the pump internals ensure high resistance to wear, excellent anti-frictional properties and optimum efficiencies. Seizure of the pump impeller caused by rust developed during disuse is excluded. Shaft sealing by means of an uncooled, maintenance-free mechanical seal. Material design: Rotary seal ring: Carbon Stationary seal ring: Ceramic O-rings: Perbunan Metal parts: Stainless steel Bearing Suction side: Delivery side: in a medium-lubricated slit ring bearing (bearing bush) of PTFE foil stabilized with carbon/graphite. in the motor bearing. Temperature/pressure limits, speed Admissible temperatures for the fluids to be pumped: For handling water up to 100 C, for slightly acid and alcalic fluids to be pumped, for Diesel, fuel oil, gasoline and oil up to 25 C. For drilling and cutting oil up to 40 C (for other fluids, please inquire). Speed Admissible internal pump pressure Admissible Supply pressure 2900 l/min (I) 20 bar Supply plus delivery pressure must not exceed the admissible internal pump pressure. Branch positions/flanges With the Standard design, the suction and delivery branches are staggered by 180. If requested, they can also be supplied staggered by 90 each (also superposed). Suction branch: Oval flange DN 40 with threaded counterflange G 1 ½ ➁ Delivery branch: s CVP 423 and CVP 426/2-10 stages with oval flange DN 32 and counterflange G 1 ¼ ➁, from sizes CVP 423 and CVP 426/12 and above - 18 stages and CVP 428/2 and above - 18 stages and CVP 428/2-10 stages with round flange DN 32, PN 25, DIN 2534 and threaded counterflange G 1 ¼ according to DIN 2567 ➁ Connections: A1 venting connection G 1/4 B1 draining connection G 1/4 Drive: By surface- cooled three-phase squirrel-cage motors. V18 (with CVP 423/2-10 and CVP 426/2-10) or V1 type of construction (with CVP 423/12-18, CVP 426/12-18 and CVP 428/2-10), enclosure IP 54 according to IEC Standards, class B insulation, performances and main dimensions according to DIN Forthe possible voltages and connection types as a function of the motor performance, please refer to the table below. Motor performance Voltage/frequency and connection type 220 V/50 Hz 380 V/50 Hz Y Y up to 2.2 X X and above - - X X Materials Denomination Part No Material design W6 Suction casing 106 GG-25 Delivery casing 107 GG-25 Wearing plate 135 Perbunan with metal reinforcement Diffuser 171 Special plastic (Ryton) Pump shaft Impeller 230/ Impeller 230/ Bearing bush 370 PTFE foil stabilized with carbon/graphite Distance ring Stage casing ➀ other speeds on request ➁ counterflanges, screws and gaskets are included in the scope of supply. 1
2 Characteristics CVP to 18 stages, n = /min CVP to 18 stages, n = /min CVP to 10 stages, n = /min The values apply to the fluids to be pumped with a density of p = 1 kg/dm 3 and a kinematic viscosity v = 1 mm 2 /s. Delivery value and guaranteed efficiencies according to DIN 1944, stage of accurancy III. Abbreviation Abbreviation system of a CVP pump: This abbreviation is entered on the rating plate. 2 VM 536 E / 3.84
3 data Series CVP 423 Driving side delivery flow l/min m 3 /h / 2 0, / 4 0, / 6 1, / 8 1,5 90 S /10 2,2 90 L /12 2,2 90 L /14 3,0 100 L /16 3,0 100 L /18 4,0 112 M total delivery head m Series CVP 426 Driving side delivery flow l/min m 3 /h / 2 0, / 4 1, / 6 1,5 90 S / 8 2,2 90 L /10 3,0 100 L /12 4,0 112M /14 4,0 112M /16 5,5 132 S /18 5,5 132 S total delivery head m Series CVP 428 Driving side delivery flow l/min m 3 /h / 2 1, / 4 2,2 90 L / 5 2,2 90 L / 6 3,0 100 L / 8 4,0 112 M /10 5,5 132 S total delivery head m VM 536 E /
4 Sectional Drawing Motor flange fastening and pressure flange design for sizes CVP 423/12 CVP 426/12 CVP 428/2 and above Denomination Item No. Denomination Item No. Denomination Item No. Suction casing 106 Round sealing 412 Hexagonal screw Delivery casing 107 Mechanical seal complete 433 Hexagonal screw Stage casing 109 Spacer 504 Threaded plug 903 Wearing plate 135 Splash ring 507 Stud 904/1 Diffuser 171 Spring dowel Stud 904/2 Pump shaft 211 Spring dowel Tie bolt 905 Impeller Flange Socket head cap screw Impeller Flange Socket head cap screw Bearing bush 370 Flange Nut Flat gasket Driving motor 800 Nut Flat gasket Clamp coupling 863 Nut Joint washer Hexagonal screw Key 940 Joint washer Hexagonal screw VM 536 E /
5 Unit sizes Sense of rotation: clockwise seen from driving side Demensions in mm subject to alterations Series CVP Driving motor Unit sizes L B H Series CVP Driving motor Unit sizes L B H 423/ 2 0, / 4 0, / 6 1, / 8 1,5 90 S /10 2,2 90 L /12 2,2 90 L /14 3,0 100 L /16 3,0 100 L /18 4,0 112M / 2 0, / 4 1, / 6 1,5 90 S / 8 2,2 90 L /10 3,0 100 L /12 4,0 112 M /14 4,0 112 M /16 5,5 132 S /18 5,5 132 S Series CVP Driving motor Unit sizes L B H 428/ 2 1, / 4 2,2 90 L / 5 2,2 90 L / 6 3,0 100 L / 8 4,0 112 M /10 5,5 132 S VM 536 E /
6 6
7 7
8 Subject to technical alterations. The stated performance data are to be understood only as an outline of performance of our products. For exact limits of application please refer to the quotation and acceptance of order. AG Postfach 1140! Radolfzell Allweilerstr. 1! Radolfzell Germany Tel. +49 (0) Fax (0) service@allweiler.de Internet: VM 536 GB / Ident-No
Screw Pumps Series SPF
Screw umps Application For the delivery of fuel oils, lube oils, hydraulic oils or other lubricating liquids. The fluid media must not contain any abrasive particles nor attack the pump materials chemically.
More informationNorm-Centrifugal Pumps PN 10
Norm-Centrifugal Pumps PN 10 Pump dimensions acc. to DIN EN 733 with additional sizes Technical requirements acc. to DIN ISO 9908 Application For pumping pure water, industrial water, sea water, condensate,
More informationHigh-Pressure Centrifugal Pumps
High-Pressure Centrifugal Pumps L LV Application For handling fluids which do not contain any abrasive particles nor chemically attack the pump materials. Main fields of application In water supply, booster,
More informationVolute Casing Centrifugal Pumps of Inline Design Series NI
Volute Casing Centrifugal Pumps of Inline Design Series NI Application For pumping pure water, industrial water, sea water, condensates, oils, brines, lyes and hot water. The fluids to be pumped must not
More informationALLWEILER. Pressure-relief valves, indirectly pilot-controlled. Series DVI
Pressure-relief valves, indirectly pilot-controlled Series DVI Range of application The pressure-relief valves of Series DVI can be applied for maximum operating temperatures up to 150 C (higher temperatures
More informationScrew Pump Twin Aggregates Series SPZ/M MagDrive
Screw Pump Twin Aggregates Series SPZ/M MagDrive Application For the delivery of fuel oils, hydraulic oils or other lubricating liquids. The fluid media must not contain any abrasive particles nor attack
More informationVolute Casing Centrifugal Pumps in In-line Design with Magnetic Drive. Series CNI-M
Volute Casing Centrifugal Pumps in In-line Design with Magnetic Drive Series CNI-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service of hermetically
More informationVolute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive. Series CNH-ML
Volute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive Series CNH-ML Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
More informationVolute Casing Centrifugal Pumps according to EN 22858, ISO 2858 with Magnetic Drive. Series CNH-M
Volute Casing Centrifugal Pumps according to EN 22858, ISO 2858 with Magnetic Drive Series CNH-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
More informationVolute Casing Centrifugal Pumps PN 16 for Heat Transfer Oils up to 350 C Series NTT Pump dimensions acc. to DIN EN 733 with additional sizes
Volute Casing Centrifugal Pumps PN 16 for Heat Transfer Oils up to 350 C Series NTT Pump dimensions acc. to DIN EN 733 with additional sizes Application For handling organic heat-transfer oils in heat
More informationALLWEILER. Pressure relief valves, directly controlled. Series DS/DT
ALLWEILER Pressure relief valves, directly controlled Range of application The pressure relief valves of can be applied for maximum operating temperatures up to 150 C (higher temperatures on request).
More informationScrew Pumps Series EMTEC HIGH-TECH FOR EMULSION. 20 DQ axial branch with pipe thread. 140 D8.6 radial branch with SAE flange
Screw Pumps 20 DQ axial branch with pipe thread HIGH-TECH FOR EMULSION 140 D8.6 radial branch with SAE flange Application For handling good, medium or mal-lubricating, abrasive fluids in cooling lubricant
More informationVolute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C
Volute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C Series CMIT in inline design Series CMAT with axial inlet ATEX 0 a Series CMAT Series
More informationALLWEILER. Block Macerators Series ABM Designs S and I. Design I with controller and seal water unit
Block Macerators Series ABM Designs S and I Design S Design I with controller and seal water unit Usage Macerators chop solids conveyed in liquids; materials like wood, textiles, plastics, paper, rubber,
More informationHigh-pressure pumps Series HP45
High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationHigh-pressure pumps Series HP49
High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationSide channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
More informationBoiler Feed Booster Pump YNK. Type Series Booklet
YNK Type Series Booklet Legal information/copyright Type Series Booklet YNK All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any
More informationPN 16 Volute Centrifugal Pumps (depending on materials up to PN 25) according to EN 22858/ISO 2858 and EN ISO 5199
PN 16 Volute Centrifugal Pumps (depending on materials up to PN 25) according to EN 22858/ISO 2858 and EN ISO 5199 Utilization Used to pump non-aggressive or aggressive liquids, cold or hot liquids, clean
More informationALLWEILER. Pressure relief valves, indirectly pilot controlled. Series DVI
Pressure relief valves, indirectly pilot controlled Series DVI Range of application The pressure relief valves of Series DVI can be applied for maximum operating temperatures up to 150 C (higher temperatures
More informationPN 16/PN 25 Volute Centrifugal-Pumps for Heat Transfer Media Thermal Oil up to 400 C Hot Water up to 207 C
PN 16/PN 25 Volute Centrifugal-s for Heat Transfer Media Thermal Oil up to 00 C Hot Water up to 7 C Series NTWH/CTWH Series NBWH/CBWH Series NIWH/CIWH Application For circulating heat transfer media such
More informationSide channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate
More informationSide channel pumps ADH/CDH AEH TECHNICAL DATA. Temperature: max. 120 C. PN 40 for AEH
Side channel pumps ADH/CDH 0801... 2504 AEH 0805... 0808 TECHNICAL DATA Capacity: Head: Speed: max. 7,2 m³/h max. 400 m max. 3000 rpm Temperature: max. 120 C Casing pressure: Shaft sealing: PN 25 for ADH/CDH
More informationPropeller Pump. Performance data Delivery flow Q up to m³/h Delivery head H up to 1,5 m Liquid temperature t up to 100 C Delivery branch
Propeller Pump Utilization and main fields of application For pumping sewage containing nitrate or activated sludge from the nitrification basin to the denitrification basin (recirculation). Further for
More informationSelf-priming Centrifugal Pumps ACL
Self-priming Centrifugal Pumps ACL Description Series ACL, ACLD and ACLDR pumps are horizontal, self-priming segmental-type side-channel pumps. They are manufactured single and multiple staged. In type
More informationVolute Casing Centrifugal Pumps of the Block-Type Construction with Magnetic Coupling
Volute Casing Centrifugal Pumps of the BlockType Construction with Magnetic Coupling ALLMAG Series CMA ATEX 0 a Application For handling toxic, volatile, explosive or other fluids harmful to the environment
More informationLowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz
Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733 SH Series 60 Hz SERIE SH HYDRAULIC PERFORMANCE RANGE AT 60 Hz WEB 10-2006 2 CONTENTS 5 Specifications... 6
More informationLowara. Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733. SH Series. 50 Hz
Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733 SH Series 50 Hz SERIE SH OPERATING CHARACTERISTICS AT 50 Hz PRINT 05-2007 2 CONTENTS 5 Specifications......................................................................
More informationProgressive Cavity Pumps in Block Design TECFLOW Series
Progressive Cavity Pumps in Block Design TECFLOW Series Applications In waste water and waste water treatment engineering and in environmental industries for pumping low and high viscous liquids, neutral,
More informationTechnical data 50 & 60 Hz. Vertical centrifugal pumps Series: DPLHS
Technical data 50 & 60 Hz Vertical centrifugal pumps Series: DPLHS 2 Table of Contents 1 Pump introduction 1.1 General... 4 1.2 Model key... 4 1.3 Description of the product... 4 1.4 Operation... 5 1.5
More informationData sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
More informationSVI SERIES HYDRAULIC PERFORMANCE RANGE AT 50 Hz
50 Hz SVI Series 2, 4, 8, 16, 33, 46, 66, 92 SUBMERSIBLE VERTICAL ELECTRIC PUMPS EQUIPPED WITH IE2 MOTORS COMPLYING WITH REGULATION (EC) no. 640/2009 Cod. 191002451 Rev ev.a.a Ed.01/2012 SVI SERIES HYDRAULIC
More informationData sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
More informationSide Channel Pumps Self-priming, segmental type with verly low NPSH
Side Channel Pumps Self-priming, segmental type with verly low NPSH CEH Sizes 1201 6108, 1202/5 6108/5, 1202/7 6107/7 Technical data Capacity: Delivery head: Speed: max. 35 m³/h max. 354 m max. 1800 1/min
More informationData sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI (1~3 V, EPDM, PN 16) Pump curves Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 16 Max. ambient temperature T C 1 1 Maximum operating pressure p max 16
More informationSide Channel Pumps CEH CEH 1202/ /7 TECHNICAL DATA. Temperature: max. 180 C Casing pressure: PN 40
Side Channel Pumps CEH 1201... 6108 CEH 1202/7... 6107/7 TECHNICAL DATA Output: Delivery head: Speed: max. 35 m³/h max. 354 m max. 1800 rpm Temperature: max. 180 C Casing pressure: PN 40 Shaft sealing:
More informationSIHI prime - Side Channel Pumps Self-priming, segmental type with very low NPSH
SIHI prime - Side Channel Pumps Self-priming, segmental type with very low NPSH CEH-X 1201 3608 TECHICAL DATA Capacity: Delivery head: Speed: from 0.4 up to 7.5 m³/h from 10 up to 322 m 1450 rpm (max.
More informationSIHI SuperNova. Volute casing pumps. Type ZLIC TECHNICAL DATA. 0B, 0C, 4B max. 120 C Casing pressure: PN 16 / PN 10 1)
Volute casing pumps SIHI SuperNova Type ZLIC 040160... 200 TECHNICAL DATA Output: Head: Speed: Material: Temperature: max. 330 m³/h max. 60 m max. 3600 rpm grey cast iron: 0B, 0C material design: 0B, 0C,
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE CURVE 150 206 - CONSTRUCTIONS
More informationVertical multistage centrifugal pumps in ring-section design
Vertical multistage centrifugal pumps in ring-section design Vertical multistage centrifugal pumps in ring-section design PUMP DESIGN Multistage centrifugal pumps in ring-section design, radially split,
More informationVolute Casing Pump additional sizes to those of ISO 2858/EN 22858
Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:
More informationHigh-pressure In-line Pump. Movitec. 50 Hz. Type Series
High-pressure In-line Pump 50 Hz Type Series Operating data A Characteristic Value low rate Q [m 3 /h] 8,6 Q [l/s] 2,4 Head H [m] 1 luid temperature T [ C] -15 to +120 Operating pressure p [bar] 1) B Characteristic
More informationScrew Pumps Series EMTEC. with ALLSPEED Controller HIGH-TECH FOR EMULSION. 20 DQ axial suction branch with pipe thread
Screw Pumps DQ axial suction branch with pipe thread with ALLSPEED Controller HIGH-TECH FOR EMULSION 1 D8.6 radial suction branch with SAE flange Applications For handling liquids with good, limited or
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE
More informationMZ, MA. Liquid ring pumps. 3 Design. 1 Fields of application. 4 Designation. 5 Materials. 2 Operating Data
Type series booklet CTI-1700/00 [12-2008] MZ, MA Liquid ring pumps 1 Fields of application Multi-stage, horizontal liquid ring pumps, with self-priming capacity. MZ and MA pumps are used for pumping of
More informationGeneral Catalog. A New Vision for Quality Pumps. General Catalog
General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 SS hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized ball bearings
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 QUANTITY FOR MODEL 303 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE 40/86 203 PERFORMANCE CURVE 40/106 204 PERFORMANCE CURVE 40/126 205 PERFORMANCE CURVE 40/156
More informationGCEA-GCA GCEA(N)-GCA(N) Series made of AISI 316
GCEA-GCA GCEA(N)-GCA(N) Series made of AISI 316 Single and twin-impeller Centrifugal Electric Pumps 50 Hz GCEA-GCA - GCEA(N)-GCA(N) SERIES HYDRAULIC PERFORMANCE RANGE AT 50 Hz GCA GCEA PRINT 11-2006 2
More informationVERTICAL IN-LINE PUMP
VERTICAL IN-LINE PUMP TECHNICAL FEATURES ELINE: Vertical centrifugal pumps, single impeller, volute casing, non-self priming pump, in-line executive, with mechanical seal. Hydraulically designed in line
More informationLiquid ring vacuum pumps with magnetic coupling
Liquid ring vacuum pumps with magnetic coupling LPH 75320, LPH 75330, LPH 75340 Pressure range: Suction volume flow: 33 to 1013 mbar 485 to 1615 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring vacuum
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 CONSTRUCTIONS 301 CONSTRUCTIONS 302 MECHANICAL SEAL 303 COUNTERFLANGE 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 3-4-5-6 impellers ) 204 PERFORMANCE CURVE 3 ( 7-8-9 impellers ) 205
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
More informationCVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
More informationVolute pumps for hot water
Volute pumps for hot water ZLI 25-125... 80-200 TECHNICAL DATA output: max. 140 m³/h delivery head: max. 60 m speed: max. 3600 1/min material: spheroidal graphite iron temperature: max. 150 C casing pressure:
More informationLiquid ring vacuum pumps
Liquid ring vacuum pumps LEH 350, LEH 450 Pressure range: Suction volume flow: 33 to 1013 mbar 120 to 535 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement pumps of uncomplicated and
More informationSV Series SV 2, 4, 8, 16 SV 33, 46, 66, 92
SV Series SV 2, 4, 8, 16 SV 33, 46, 66, 92 Vertical Multistage Electric Pumps equipped with high efficiency PLM motors 60 Hz SV SERIES HYDRAULIC PERFORMANCE RANGE AT 60 Hz WEB 04-2008 2 CONTENTS Specifications...5
More informationMultistage Pumps MP, MPA, MPB, MPV SIZES DN 40 - DN 125. Jansen Pompentechniek T: +31(0) E:
Multistage Pumps MP, MPA, MPB, MPV SIZES DN 40 - DN 125 Technical Data Performance range: m Capacities up to 340m 3 /h (1500USgpm) m Head up to 500m (1640feet) m Max. speed up to 3600rpm Multistage pumps
More informationAGA-AGC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00 205 PERFORMANCE CURVE
More informationTechnical Data 50 Hz. Vertical centrifugal pumps Series: DPVE / DPV(S) / DPVCF / DPLHS
Technical Data 50 Hz Vertical centrifugal pumps Series: DPVE / DPV(S) / DPVCF / DPLHS DPVE DPV(S) DPVCF DPLHS Table of Contents 1 Pump introduction 1.1 General... 5 1.2 Model key... 5 1.3 Description of
More informationMovitec VCI Type Series Booklet
Multistage High-pressure Immersion Centrifugal Pump Movitec VCI Type Series Booklet Legal information/copyright Type Series Booklet Movitec VCI All rights reserved. The contents provided herein must neither
More informationThermoplastic Centrifugal pump, Type NM
Thermoplastic Centrifugal pump, Type NM acc. to DIN 24256, EN 22858 and ISO 2858 Size: 32-125 up to 150-400 Capacity Q: up to 450 m 3 / h Head H: up to 100 m Operating temperature t: PE up to + 70 C PP
More informationCentrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733. SH Series
Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733 MARKET SECTORS The Lowara SH series pumps are used for water and clean liquid circulation in heating, ventilating and
More informationVolute pumps for hot water up to 207 C
Volute pumps for hot water up to 207 C SIHI SuperNova ZDND 032160... 250 TECHNICAL DATA Output: Delivery head: Speed: max. 600 m³/h max. 90 m max. 3600 Temperature: max. 207 C Casing pressure: PN 25 Shaft
More informationLiquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design LEM 90, LEM 125, LEM 150 LEL 90, LEL 125, LEL 150 Pressure range: Suction volume flow: 33 to 1013 mbar 32 to 170 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum
More informationSTEVI 450 / way control valve in mixing and diverting design DN
STEVI 450 / 451 with electric and pneumatic actuators 3-way control valve in mixing and diverting design DN 15-150 STEVI 450 / 451 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel
More informationVERTICAL MULTISTAGE PUMPS SSV-F Hz
VERTICAL MULTISTAGE PUMPS SSV-F 1-3 - 6-1 - 15 5Hz TABLE OF HYDRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATED POWER H1 Q = DELIVERY l/min 8,3 16,7, 33,3 2 5, 58,3 67 75, m³/h,5 1 1,5 2 2,5 3 3,5,5 kw HP Bar
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW) 205 PERFORMANCE CURVE
More informationSide channel pump PN 40 SRZ. self-priming, according to DIN EN 734. Technical description
Side channel pump PN 0 self-priming, according to DIN EN 7 SRZ Technical description SRZ pumps are self-priming side channel pumps in multistage construction capable of handling aerated liquids. They have
More informationVolute Centrifugal Pumps PN 16 / PN 25 for Heat Transfer Media Thermal Oil up to 350 C Hot Water up to 204 C. Series NTWH/CTWH process model
Volute Centrifugal s PN 16 / PN 25 for Heat Transfer Meia Thermal Oil up to 350 C Hot Water up to 20 C Series NTWH/CTWH process moel Series NTWH/CTWH Series NBWH/CBWH block moel Series NIWH/CIWH in-line
More informatione-sv Series 1, 3, 5, 10, 15, 22, 33, 46, 66, 92, 125
e-sv Series 1, 3, 5, 10, 15, 22, 33, 46, 66, 92, 125 Vertical Multistage Electric Pumps equipped with high efficiency motors 50 Hz e-sv SERIES HYDRAULIC PERFORMANCE RANGE AT 50 Hz WEB 07-2010 2 CONTENTS
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW)
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART IDROGO PERFORMANCE CHART IDROGO
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART 40 203 PERFORMANCE CHART 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW 301
More informationVertical, Multi-Staged Stainless Steel Pumps
Vertical, Multi-Staged Stainless Steel Pumps www.masflo.fr FEATURES The XVM pump is a non-self-priming vertical multistage centrifugal pump coupled to a standard motor. Inlet and outlet are located at
More informationStandard SO according to DIN
Standard SO according to DIN 24.255 DESIGN FEATURES Design Features Horizontal centrifugal, single Stage pump. Spiral volute casing. Overhung on shaft impeller. Grease or oil lubricated antifriction bearing.
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2
More informationXVM. Vertical, Multi-Staged Stainless Steel Pumps FEATURES APPLICATIONS
Vertical, Multi-Staged Stainless Steel Pumps FEATURES The pump is a non-self-priming vertical multistage centrifugal pump coupled to a standard motor. Inlet and outlet are located at the bottom at the
More informationMTB /158 A-F-A-BQQV 400D-2 5,5kW
GRUNDFOS DATA BOOKLET MTB 5-1/158 A-F-A-BQQV D- 5,5kW Grundfos pump 95879 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/mtb/95879/mtb-5-1-158-a-f-a-bqqv.html
More informationSVI Series 2, 4, 8, 16, 33, 46, 66, Hz
60 Hz SVI Series 2, 4, 8, 16, 33, 46, 66, 92 SUBMERSIBLE VERTICAL ELECTRIC PUMPS EQUIPPED WITH IE2/IE3 MOTORS COMPLYING WITH REGULATION (EC) no. 640/2009 Cod. 191002091 Rev ev.b.b Ed.06/2012 SVI SERIES
More informationVolute pumps for hot water up to 230 C
Volute pumps for hot water up to 230 C SIHI SuperNova ZEND 031125... 125250 TECHNICAL DATA Output: Delivery head: Speed: max. 600 m³/h max. 90 m max. 3600 rpm Temperature: max. 230 C (1) Casing pressure:
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECNICAL DATA 500 MOTOR DATA 500
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 056 203 PERFORMANCE CURVE 066 204 PERFORMANCE CURVE 086 205 - CONSTRUCTIONS 300 SECTIONAL
More informationMULTIGO. EBARA Pumps Europe S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 40 203 PERFORMANCE CURVES 80 204 - CONSTRUCTIONS SECTIONAL VIEW
More informationMMD 4 Poles. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE MMD4 32-250 205 PERFORMANCE CURVE MMD4 40-250 206 PERFORMANCE CURVE MMD4 50-250 207 PERFORMANCE
More informationType ZEND. SIHI Model: ZEND / ZDND / ZHND Hot Water Transfer Pumps Product Reference Manual. Experience In Motion. FPD-xxxx
Type ZEND SIHI Model: ZEND / ZDND / ZHND Hot Water Transfer Pumps Product Reference Manual FPD-xxxx Experience In Motion Volute pumps for hot water up to 230 C SIHI SuperNova ZEND 031125... 125250 TECHNICAL
More informationData sheet. Omega B GB G F Version no.: 1. Operating data. Design. Driver, accessories. Clean water. Actual developed head 57.
Data sheet Item no.: 3700 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 415.38 m ³/h Clean water Actual developed head 57.81 m Not containing chemical and Efficiency 82.3 % mechanical
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE CURVE 150 206 - CONSTRUCTIONS
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 stainless steel hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized
More informationSIHI multi Type MSC. Modular multistage pumps. Description. Construction. Applications. Optional special designs. Materials.
Modular multistage pumps SIHI multi Type MSC Description The SIHI multi MSC range of horizontal, ring-section multistage pumps have been designed for long-term reliability when pumping high pressure liquids.
More informationSIHI multi. Modular multistage pumps. Type MSL, MSM. Description. Construction. Applications. Technical Data. Options
Modular multistage pumps SIHI multi Type MSL, MSM Description SIHI multi pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN
More informationGRUNDFOS DATA BOOKLET. Grundfos UPBasic. Circulator pumps 50 Hz
GRUNDFOS DATA BOOKLET Grundfos UPBasic Circulator pumps 50 Hz Contents General data Performance ranges Page Product range, 1 x 0 V, 50 Hz Page 4 Type key Page 4 Construction Page 4 Material specification
More informationEVMU. Model EVMU / EVMUG / EVMUL Contents. EBARA Stainless Steel Vertical Multistage
Model / G / L Contents Item No. Specifications Selection Performance Pump Sectional Chart Curve Dimensions View 3 5 10 18 G32 G45 G64 L3 L5 L10 L18 L32 L45 L64 803 804 803 804 805 806 807 808 809 810 811
More information