O.E. Quality Replacement Parts Designed for Chrysler LLc. Products:

Size: px

Start display at page:

Download "O.E. Quality Replacement Parts Designed for Chrysler LLc. Products:"

Ezra Cox
5 years ago
Views:

Products: AAM 925 Front Beam Axle - (14 Bolt) AAM 1050 Rear Axle - (14 Bolt) AAM 1150 Rear Axle - (14 Bolt) 2 9 10

2 Only original equipment quality components are guaranteed to meet the same specifications as the parts they replace. OE components means performance to the vehicle manufacturer s standards. Table of contents O.E. Quality Replacement Parts Designed for Chrysler LLc. Products: AAM 925 Front Beam Axle - (14 Bolt) AAM 1050 Rear Axle - (14 Bolt) AAM 1150 Rear Axle - (14 Bolt) New Part Number Announcement Notes Safety Information Warranty

3 DODGE 9.25" FRONT BEAM AXLE AAM BOLT ILLUST.# AAM O.E. USEAGE MODEL YEAR 1 HUB & ROTOR ASM (SINGLE WHEEL) FOR REFERENCE ONLY 2 HUB & ROTOR ASM (DUAL WHEEL) FOR REFERENCE ONLY AB UJT & AXLE SHAFT ASM - RIGHT HAND LONG 1 DR/DH AB UJT & AXLE SHAFT ASM - LEFT HAND SHORT 1 DR/DH AA UJT & AXLE SHAFT ASM - LEFT HAND SHORT 1 DR/DH AA UJT & AXLE SHAFT ASM - RIGHT HAND LONG 1 DR/DH AB AXLE SHAFT LH INNER 1485 SERIES 1 DR/DH AB AXLE SHAFT RH INNER 1485 SERIES 1 DR/DH AXLE SHAFT LH INNER 1550 SERIES 1 DR/DH AXLE SHAFT RH INNER 1550 SERIES 1 DR/DH LH / RH OUTER AXLE SHAFT 1550 SERIES 1 DR/DH AA RH INNER/OUTER COMPLETE AXLE ASSEMBLY 1550 SERIES 1 DR/DH AA LH INNER/OUTER COMPLETE AXLE ASSMEBLY 1550 SERIES 1 DR/DH AE U-JOINT DR/DH AA U-JOINT DR/DH AVAILABLE IN KIT ONLY PINION YOKE NUT 1 DR/DH AVAILABLE IN KIT ONLY PINION YOKE WASHER 1 DR/DH AC PINION YOKE (PILOTED) 1 DR/DH AVAILABLE IN KIT ONLY PINION YOKE SEAL 1 DR/DH AVAILABLE IN KIT ONLY SMALL PINION BEARING (CUP & CONE) 1 DR/DH AVAILABLE IN KIT ONLY COLLAPSIBLE SPACER 1 DR/DH AXLE HOUSING FOR REFERENCE ONLY AAM 925 FRONT BEAM AXLE (14 BOLT) AA RING GEAR & PINION SET (3.42 RATIO) 1 DH AA RING GEAR & PINION SET (3.73 RATIO) 1 DH AA RING GEAR & PINION SET (4.10 RATIO) 1 DR/DH AA RING GEAR & PINION SET (4.10 RATIO) 1 DH AVAILABLE IN KIT ONLY AXLE SHAFT SEAL 2 DR/DH AVAILABLE IN KIT ONLY DIFF. CASE BEARING ASM (CUP & CONE) 2 DR/DH AA DIFF. CASE ASM (SPHERICAL BACK TRACRITE OPEN; WITH INTERNALS) 1 DH DIFF. CASE ASM (SPHERICAL BACK TRACRITE OPEN; WITH INTERNALS) 1 DH DIFF. OPEN CASE (WITH INTERNALS) 1 DR/DH AVAILABLE IN KIT ONLY RING GEAR BOLT 12 DR/DH AVAILABLE IN KIT ONLY PINION SHAFT LOCK SCREW 1 DR/DH SINGLE WHEEL VEHICLE REFERENCE GUIDE DUAL WHEEL 18 AVAILABLE IN KIT ONLY DIFF. PINION THRUST FLAT WASHER 2 DR/DH AVAILABLE IN KIT ONLY DIFF. PINION THRUST SPHERICAL WASHER 2 DH AVAILABLE IN KIT ONLY DIFF. PINION FLAT BACK GEAR 2 DR/DH AVAILABLE IN KIT ONLY DIFF. PINION SPHERICAL BACK GEAR 2 DH DODGE RAM

4 DODGE 9.25" FRONT BEAM AXLE AAM BOLT ILLUST.# AAM O.E. USEAGE MODEL YEAR 20 AVAILABLE IN KIT ONLY DIFF. SIDE THRUSH WASHER 2 DR/DH AVAILABLE IN KIT ONLY DIFF. SIDE FLAT BACK GEAR (30 TOOTH) 2 DR/DH AVAILABLE IN KIT ONLY DIFF. SIDE SPHERICAL BACK GEAR (30 TOOTH) 2 DH AVAILABLE IN KIT ONLY DIFF. PINION SHAFT 1 DR/DH AVAILABLE IN KIT ONLY LARGE PINION BEARING (CUP & CONE) 1 DR/DH AVAILABLE IN KIT ONLY LOWER BALL JOINT SEAL 2 DR/DH AVAILABLE IN KIT ONLY LOWER BALL JOINT 2 DR/DH AVAILABLE IN KIT ONLY LOWER BALL JOINT NUT 2 DR/DH AVAILABLE IN KIT ONLY RETAINING RING 2 DR/DH AVAILABLE IN KIT ONLY UPPER BALL JOINT 2 DR/DH AVAILABLE IN KIT ONLY UPPER BALL JOINT NUT 2 DR/DH AVAILABLE IN KIT ONLY COVER PAN GASKET 1 DR/DH AVAILABLE IN KIT ONLY COVER PAN 1 DR/DH # DODGE 9.25 FRONT MASTER INSTALL KIT SEAL, PINION 1 SLEEVE, PINION SEAL 1 NUT, PINION FLANGE 1 WASHER, PINION FLANGE 1 SPACER, PINION BEARING 1 BOLT, RING GEAR 12 GASKET, COVER PAN 1 # DODGE 9.25 FRONT MASTER BEARING KIT DIFF. CASE BEARING ASM (CUP & CONE) 2 LARGE PINION BEARING ASM (CUP & CONE) 1 SMALL PINION BEARING ASM (CUP & CONE) 1 COLLAPSIBLE SPACER 1 PINION YOKE WASHER 1 PINION YOKE NUT 1 # DODGE 9.25 FRONT DIFF. GEAR KIT # DODGE 9.25 FRONT DIFF. GEAR KIT MODEL YEAR MODEL YEAR DIFF. PINION GEAR 2 DIFF. PINION THRUST WASHER 2 DIFF. SIDE GEAR 2 DIFF SIDE THRUST WASHER 2 DIFF. PINION SHAFT 1 DIFF. PINION SHAFT LOCK SCREW 1 DIFF. PINION GEAR 2 DIFF. PINION THRUST WASHER 2 DIFF. SIDE GEAR 2 DIFF SIDE THRUST WASHER 2 DIFF. PINION SHAFT 1 DIFF. PINION SHAFT LOCK SCREW 1 # DODGE 9.25 FRONT OUTPUT SHAFT SEAL KIT OUTPUT SEAL 2 FRONT WHEEL HUB BOLTS 8 # DODGE 9.25 FRONT COVERPAN KIT COVERPAN 1 GASKET 1 BOLTS 14 FILL PLUG 1 # DODGE 9.25 FRONT PINION SEAL KIT PINION SEAL 1 PINION SLEEVE 1 CRUSH SLEEVE 1 PINION NUT 1 PINION NUT WASHER 1 AAM 925 FRONT BEAM AXLE (14 BOLT) GASKET, COVERPAN 1 BOLT - M8X1.25X20 HEX HEAD 14 CAP ASM 2 ASSORTED PINIONM SHIMS 18 PLUG, FILL/DRAIN 2 PLUG, FILL/DRAIN 1 BOLT, HEX 16 GASKET, HUB 2 GASKET, HUB 2 BOLT, HEX

5 DODGE 9.25" FRONT BEAM AXLE AAM BOLT WITH E - LOCK ILLUST.# AAM O.E. USEAGE MODEL YEAR 1 HUB & ROTOR ASM (SINGLE WHEEL) FOR REFERENCE ONLY AB U-JOINT & AXLE SHAFT ASM - RH LONG 1 DR/DH AB U-JOINT & AXLE SHAFT ASM - LH SHORT 1 DR/DH AA U-JOINT & AXLE SHAFT ASM - LH SHORT 1 DR/DH AA U-JOINT & AXLE SHAFT ASM - RH LONG 1 DR/DH AE U-JOINT & DR/DH AA U-JOINT DR/DH AVAILABLE IN KIT ONLY PINION YOKE NUT 1 DR/DH AVAILABLE IN KIT ONLY PINION YOKE WASHER 1 DR/DH AC PINION YOKE (PILOTED) 1 DR/DH AVAILABLE IN KIT ONLY PINION YOKE SEAL 1 DR/DH AVAILABLE IN KIT ONLY SMALL PINION BEARING (CUP & CONE) 1 DR/DH AVAILABLE IN KIT ONLY COLLAPSIBLE SPACER 1 DR/DH AVAILABLE IN KIT ONLY BALL JOINT UPPER 2 DR/DH AVAILABLE IN KIT ONLY KNUCKLE - RIGHT HAND 1 DR/DH AVAILABLE IN KIT ONLY KNUCKLE - LEFT HAND 1 DR/DH AVAILABLE IN KIT ONLY KNUCKLE - RIGHT HAND 1 DR/DH AVAILABLE IN KIT ONLY KNUCKLE - LEFT HAND 1 DR/DH AVAILABLE IN KIT ONLY UPPER BALL JOINT NUT 2 DR/DH AVAILABLE IN KIT ONLY LOWER BALL JOINT 2 DR/DH AVAILABLE IN KIT ONLY LOWER BALL JOINT SEAL 2 DR/DH AVAILABLE IN KIT ONLY LOWER BALL JOINT NUT 2 DR/DH AAM 925 FRONT BEAM AXLE (14 BOLT) 16 AVAILABLE IN KIT ONLY LARGE PINION BEARING (CUP & CONE) 1 DR/DH AA RING GEAR & PINION SET (4:56) 1 DR/DH AVAILABLE IN KIT ONLY DIFF. CASE BEARING ASM (CUP & CONE) 2 DR/DH AVAILABLE IN KIT ONLY DIFF. BEARING ADJUSTER NUT 2 DR/DH AVAILABLE IN KIT ONLY AXLE SHAFT SEAL 2 DR/DH AB COIL & CASE ASM (TRACRITE EL) 1 DR/DH AVAILABLE IN KIT ONLY RING GEAR BOLT 12 DR/DH AVAILABLE IN KIT ONLY ASM COIL 1 DR/DH AXLE HOUSING FOR REFERENCE ONLY SINGLE WHEEL 25 AVAILABLE IN KIT ONLY COVER PAN GASKET 1 DR/DH AVAILABLE IN KIT ONLY COVER PAN 1 DR/DH VEHICLE REFERENCE GUIDE DODGE RAM

6 DODGE 9.25" FRONT BEAM AXLE AAM BOLT WITH E - LOCK # DODGE 9.25 FRONT MASTER INSTALL KIT SEAL, PINION 1 SLEEVE, PINION SEAL 1 NUT, REAR AXLE DRIVE PINION 1 WASHER, PINION FLANGE 1 SPACER, PINION BEARING1 # DODGE 9.25 FRONT MASTER BEARING KIT BOLT, RING GEAR 12 GASKET, DIFF COVER PAN 1 BOLT - M8X1.25X20 HEX HEAD 14 SEAL & GUIDE ASM, AXLE SHAFT 2 ASSORTEE PINION BEARING SHIMS 18 PLUG, FILL/DRAIN 1 NUT, HUB 2 WASHER, HUB NUT 2 BOLT, FRONT WHEEL HUB 8 PIN, COTTER (HUB NUT RETAINER) 2 # DODGE 9.25 FRONT DIFF. GEAR KIT - 33 TOOTH # DODGE 9.25 FRONT DIFF. GEAR KIT - 33 TOOTH MODEL YEAR DIFF. PINION GEAR 2 DIFF. PINION THRUST WASHER 2 DIFF. SIDE GEAR 2 DIFF SIDE THRUST WASHER 2 DIFF. PINION SHAFT 1 DIFF. PINION SHAFT LOCK SCREW 1 DIFF. PINION GEAR 2 DIFF. PINION THRUST WASHER 2 DIFF. SIDE GEAR 2 DIFF SIDE THRUST WASHER 2 DIFF. PINION SHAFT 1 DIFF. PINION SHAFT LOCK SCREW 1 # DODGE 9.25 FRONT OUTPUT SHAFT SEAL KIT OUTPUT SEAL 2 FRONT WHEEL HUB BOLTS 8 # DODGE 9.25 FRONT COVERPAN KIT COVERPAN 1 GASKET 1 BOLTS 14 FILL PLUG 1 # DODGE 9.25 FRONT PINION SEAL KIT PINION SEAL 1 PINION SLEEVE 1 CRUSH SLEEVE 1 PINION NUT 1 PINION NUT WASHER 1 AAM 925 FRONT BEAM AXLE (14 BOLT) DIFF. CASE BEARING ASM (CUP & CONE) 2 LARGE PINION BEARING ASM (CUP & CONE) 1 SMALL PINION BEARING ASM (CUP & CONE) 1 COLLAPSIBLE SPACER 1 PINION YOKE WASHER 1 PINION YOKE NUT 1 8 9

7 DODGE 10.5" REAR AXLE AAM BOLT ILLUST.# AAM O.E. USEAGE MODEL YEAR 1 AXLE HOUSING FOR REFERENCE ONLY AC RING GEAR & PINION SET (3.73 RATIO) 1 DODGE RAM AC RING GEAR & PINION SET (4.10 RATIO) 1 DODGE RAM AVAILABLE IN KIT ONLY DIFF. CASE BEARING ASM (CUP & CONE) 2 DODGE RAM AA DIFF. OPEN CASE ASM (WITH INTERNALS) 1 DODGE RAM AA DIFF. CASE ASM (TRACRITE GT DIFF.) 1 DODGE RAM DIFF. OPEN CASE (WITHOUT INTERNALS) 1 DODGE RAM AVAILABLE IN KIT ONLY DIFF. PINION THRUST WASHER 2 DODGE RAM AVAILABLE IN KIT ONLY DIFF. PINION GEAR 2 DODGE RAM AVAILABLE IN KIT ONLY DIFF. SIDE THRUST WASHER 2 DODGE RAM AVAILABLE IN KIT ONLY DIFF. SIDE GEAR (30 TOOTH) 2 DODGE RAM AVAILABLE IN KIT ONLY RING GEAR BOLT 12 DODGE RAM AVAILABLE IN KIT ONLY DIFF. PINION SHAFT 1 DODGE RAM AVAILABLE IN KIT ONLY DIFF. PINION SHAFT RETAINING RING 1 DODGE RAM AVAILABLE IN KIT ONLY LARGE PINION BEARING ASM (CUP & CONE) 1 DODGE RAM SINGLE WHEEL HUB ASM FOR REFERENCE ONLY AXLE SHAFT (935 MM; 30 TOOTH; 8 BOLT; DISC) 2 DODGE RAM AAM 1050 REAR AXLE (14 BOLT) 15 SINGLE WHEEL ROTOR FOR REFERENCE ONLY 16 AVAILABLE IN KIT ONLY PINION YOKE NUT 1 DODGE RAM AVAILABLE IN KIT ONLY PINION YOKE WASHER 1 DODGE RAM AC PINION YOKE (PILOTED) 1 DODGE RAM PINION FLANGE ASM DODGE RAM AVAILABLE IN KIT ONLY PINION YOKE SEAL 1 DODGE RAM AVAILABLE IN KIT ONLY SMALL PINION BEARING ASM (CUP & CONE) 1 DODGE RAM AVAILABLE IN KIT ONLY COLLAPSIBLE SPACER 1 DODGE RAM AVAILABLE IN KIT ONLY EXCITER RING 1 DODGE RAM AVAILABLE IN KIT ONLY COVER PAN 1 DODGE RAM AVAILABLE IN KIT ONLY COVER PAN GASKET 1 DODGE RAM VEHICLE REFERENCE GUIDE DODGE RAM

8 DODGE 10.5" REAR AXLE AAM BOLT # DODGE 10.5 REAR MASTER INSTALL KIT SEAL, PINION 1 SLEEVE, PINION SEAL 1 NUT, PINION FLANGE 1 WASHER, PINION FLANGE 1 SPACER, PINION BEARING 1 BOLT, RING GEAR 12 GASKET, COVERPAN 1 BOLT - M8X1.25X20 HEX HEAD 14 ASSORTED PINION BEARING SHIMS 15 BOLT, HEX (SPECIAL) 16 GASKET, HUB 2 PLUG, FILL/DRAIN 1 # DODGE 10.5 REAR MASTER BEARING KIT # DODGE 10.5 REAR DIFF. GEAR KIT-30 TOOTH DIFF. PINION GEAR 2 DIFF. PINION THRUST WASHER 2 DIFF. SIDE GEAR 2 DIFF SIDE THRUST WASHER 2 DIFF. PINION SHAFT 1 DIFF. PINION SHAFT RETAINING RING 1 # DODGE 10.5 REAR WHEEL END KITS ROLLER ASSEMBLY 2 TAPERED RACE BEARING 2 NUT, HUB ADJUSTING 2 KEY, ADJUSTING NUT 2 # DODGE 10.5 REAR COVER PAN KIT COVERPAN 1 GASKET 1 BOLTS 14 FILL PLUG 1 # DODGE 10.5 REAR PINION SEAL KIT PINION SEAL 1 PINION SLEEVE 1 CRUSH SLEEVE 1 PINION NUT 1 PINION NUT WASHER 1 AAM 1050 REAR AXLE (14 BOLT) RETAINER, WHEEL HUB 1 CONE ASSEMBLY, HUB 2 DIFF. CASE BEARING ASM (CUP & CONE) 2 LARGE PINION BEARING ASM (CUP & CONE) 1 SMALL PINION BEARING ASM (CUP & CONE) 1 COLLAPSIBLE SPACER 1 BEARING TAPERED RACE 2 REAR UNITEIZED HUB SEAL 2 HEX BOLT 16 HUB GASKET 2 PINION YOKE WASHER 1 PINION YOKE NUT

DODGE 10.5" REAR AXLE AAM 1050 14 BOLT 14 15 1 2 16 17 18 3 4 1 6 7 5 2 9 8 1 3 24 10 23 ILLUST.# AAM O.E. USEAGE MODEL YEAR 1 AXLE HOUSING FOR REFERENCE ONLY 2 AVAILABLE IN KIT ONLY DIFF.

9 DODGE 10.5" REAR AXLE AAM BOLT ILLUST.# AAM O.E. USEAGE MODEL YEAR 1 AXLE HOUSING FOR REFERENCE ONLY 2 AVAILABLE IN KIT ONLY DIFF. CASE BEARING ASM (CUP & CONE) 2 DR/DH AA RING GEAR & PINION SET (4.56 RATIO) 1 DR/DH AB COIL & CASE ASM (TRAC RITE GTL ELECTRONIC) 1 POWER WAGON AVAILABLE IN KIT ONLY RING GEAR BOLT 12 DR/DH AVAILABLE IN KIT ONLY SCREW COIL TARGET BRACKET & CONNECTOR 5 DR/DH AVAILABLE IN KIT ONLY LARGE PINION BEARING ASM (CUP & CONE) 1 DR/DH AVAILABLE IN KIT ONLY COLLAPSIBLE SPACER 1 DR/DH PARK BRAKE ASM FOR REFERENCE ONLY 11 ROTOR FOR REFERENCE ONLY 12 HUB ASM FOR REFERENCE ONLY AB AXLE SHAFT (935 MM; 30 TOOTH; 8 BOLT) 2 DR/DH AVAILABLE IN KIT ONLY PINION YOKE NUT 1 DR/DH AVAILABLE IN KIT ONLY PINION YOKE WASHER 1 DR/DH AC PINION YOKE (PILOTED) 1 DR/DH AVAILABLE IN KIT ONLY PINION YOKE SEAL 1 DR/DH AVAILABLE IN KIT ONLY SMALL PINION BEARING ASM (CUP & CONE) 1 DR/DH AVAILABLE IN KIT ONLY EXCITER RING 1 DR/DH AVAILABLE IN KIT ONLY COVER PAN 1 DR/DH AVAILABLE IN KIT ONLY COVER PAN GASKET 1 DR/DH AAM 1050 REAR AXLE (14 BOLT) VEHICLE REFERENCE GUIDE DODGE RAM

10 DODGE 10.5" REAR AXLE AAM BOLT # DODGE 10.5 REAR MASTER INSTALL KIT SEAL, PINION 1 SLEEVE, PINION SEAL 1 NUT, PINION FLANGE 1 WASHER, PINION FLANGE 1 SPACER, PINION BEARING 1 BOLT, RING GEAR 12 GASKET, COVERPAN 1 BOLT - M8X1.25X20 HEX HEAD 14 ASSORTED PINION BEARING SHIMS 15 BOLT, HEX (SPECIAL) 16 GASKET, HUB 2 PLUG, FILL/DRAIN 1 # DODGE 10.5 REAR PINION SEAL KIT # DODGE 10.5 REAR COVERPAN KIT COVERPAN 1 GASKET 1 BOLTS 14 FILL PLUG 1 # DODGE 10.5 REAR WHEEL END KITS ROLLER ASSEMBLY 2 TAPERED RACE BEARING 2 NUT, HUB ADJUSTING 2 KEY, ADJUSTING NUT 2 RETAINER, WHEEL HUB 1 # DODGE 10.5 REAR MASTER BEARING KIT DIFF. CASE BEARING ASM (CUP & CONE) 2 LARGE PINION BEARING ASM (CUP & CONE) 1 SMALL PINION BEARING ASM (CUP & CONE) 1 COLLAPSIBLE SPACER 1 PINION YOKE WASHER 1 PINION YOKE NUT 1 # DODGE 10.5 REAR DIFF. GEAR KIT-30 TOOTH DIFF. PINION GEAR 2 DIFF. PINION THRUST WASHER 2 DIFF. SIDE GEAR 2 DIFF SIDE THRUST WASHER 2 DIFF. PINION SHAFT 1 DIFF. PINION SHAFT RETAINING RING 1 AAM 1050 REAR AXLE (14 BOLT) CONE ASSEMBLY, HUB 2 BEARING TAPERED RACE 2 PINION SEAL 1 PINION SLEEVE 1 CRUSH SLEEVE 1 REAR UNITEIZED HUB SEAL 2 HEX BOLT 16 HUB GASKET 2 PINION NUT 1 PINION NUT WASHER

11 DODGE 11.5" REAR AXLE AAM BOLT ILLUST.# AAM O.E. USEAGE MODEL YEAR 1 AXLE HOUSING FOR REFERENCE ONLY RING GEAR & PINION SET (3.42 RATIO) 1 DODGE RAM RING GEAR & PINION SET (3.73 RATIO) 1 DODGE RAM RING GEAR & PINION SET (4.10 RATIO) 1 DODGE RAM AVAILABLE IN KIT ONLY DIFF. CASE BEARING ASM (CUP & CONE) 2 DODGE RAM DIFF. CASE ASM (WITH INTERNALS) 1 DODGE RAM DIFF. CASE ASM (TRACRITE GT; DIFF. WITH INTERNALS) 1 DODGE RAM AVAILABLE IN KIT ONLY RING GEAR BOLT 12 DODGE RAM AVAILABLE IN KIT ONLY DIFF. SIDE THRUST WASHER 2 DODGE RAM AVAILABLE IN KIT ONLY DIFF. SIDE GEAR (30 TOOTH) 2 DODGE RAM AVAILABLE IN KIT ONLY DIFF. PINION SHAFT 1 DODGE RAM AVAILABLE IN KIT ONLY DIFF. PINION SHAFT RETAINING RING 1 DODGE RAM AVAILABLE IN KIT ONLY DIFF. PINION THRUST WASHER 2 DODGE RAM AVAILABLE IN KIT ONLY DIFF. PINION GEAR 2 DODGE RAM AVAILABLE IN KIT ONLY LARGE PINION BEARING ASM (CUP & CONE) 1 DODGE RAM SINGLE WHEEL HUB (WITHOUT INTERNALS) FOR REFERENCE ONLY 14 SINGLE WHEEL ROTOR FOR REFERENCE ONLY AAM 1150 REAR AXLE (14 BOLT) 14 HUB & ROTOR ASSEMBLY, DUAL WHEEL FOR REFERENCE ONLY AB AXLE SHAFT (1019 MM; 30 TOOTH; 8 BOLT; DUAL WHEEL; DISC) 2 DODGE RAM AA AXLE SHAFT (968 MM; 30 TOOTH; 8 BOLT; DISC) 2 DODGE RAM AVAILABLE IN KIT ONLY PINION YOKE NUT 1 DODGE RAM AVAILABLE IN KIT ONLY PINION YOKE WASHER 1 DODGE RAM AD PINION YOKE (PILOTED; SHORT 63.6) 1 DODGE RAM AVAILABLE IN KIT ONLY PINION YOKE SEAL 1 DODGE RAM AVAILABLE IN KIT ONLY SMALL PINION BEARING ASM (CUP & CONE) 1 DODGE RAM AVAILABLE IN KIT ONLY COLLAPSIBLE SPACER 1 DODGE RAM AVAILABLE IN KIT ONLY EXCITER RING 1 DODGE RAM AVAILABLE IN KIT ONLY COVER PAN 1 DODGE RAM AVAILABLE IN KIT ONLY COVER PAN GASKET 1 DODGE RAM SINGLE WHEEL DUAL WHEEL VEHICLE REFERENCE GUIDE DODGE RAM

12 DODGE 11.5" REAR AXLE AAM BOLT # DODGE 11.5 REAR MASTER INSTALL KIT SEAL, PINION 1 SLEEVE, PINION SEAL 1 NUT, PINION FLANGE 1 WASHER, PINION FLANGE 1 SPACER, PINION BEARING 1 BOLT, RING GEAR 12 GASKET, COVER PAN 1 GASKET, COVERPAN 1 BOLT - M8X1.25X20 HEX HEAD 14 CAP ASM 2 VARIOUS PINION SHIMS 18 PLUG, FILL/DRAIN 2 PLUG, FILL/DRAIN 1 BOLT, HEX 16 GASKET, HUB 2 # DODGE 11.5 REAR DIFF. GEAR KIT - 30 TOOTH DIFF. PINION GEAR 2 DIFF. PINION THRUST WASHER 2 DIFF. SIDE GEAR 2 DIFF SIDE THRUST WASHER 2 DIFF. PINION SHAFT 1 DIFF. PINION SHAFT RETAINING RING 1 # DODGE 11.5 REAR PINION SEAL KITS PINION SEAL 11 PINION SLEEVE 1 CRUSH SLEEVE 1 # DODGE 11.5 REAR COVER PAN KIT ALUMINUM # DODGE 11.5 REAR WHEEL END KITS - SINGLE WHEEL COVERPAN 1 GASKET 1 BOLTS 14 FILL PLUG 1 ROLLER ASSEMBLY 2 TAPERED RACE BEARING 2 NUT, HUB ADJUSTING 2 KEY, ADJUSTING NUT 2 RETAINER, WHEEL HUB 1 # DODGE 11.5 REAR WHEEL END KITS - DUAL WHEEL ROLLER ASSEMBLY 2 TAPERED RACE BEARING 2 NUT, HUB ADJUSTING 2 KEY, ADJUSTING NUT 2 RETAINER, WHEEL HUB 1 CONE ASSEMBLY, HUB 2 BEARING TAPERED RACE 2 REAR UNITEIZED HUB SEAL 2 HEX BOLT 16 HUB GASKET 2 AAM 1150 REAR AXLE (14 BOLT) GASKET, HUB 2 PINION NUT 1 CONE ASSEMBLY, HUB 2 BOLT, HEX 16 PINION NUT WASHER 1 BEARING TAPERED RACE 2 REAR UNITEIZED HUB SEAL 2 # DODGE 11.5 REAR MASTER BEARING KIT # DODGE 11.5 REAR COVER PAN KIT - STEEL HEX BOLT 16 HUB GASKET 2 DIFF. CASE BEARING ASM (CUP & CONE) 2 LARGE PINION BEARING ASM (CUP & CONE) 1 SMALL PINION BEARING ASM (CUP & CONE) 1 COLLAPSIBLE SPACER 1 COVERPAN 1 GASKET 1 BOLTS 14 FILL PLUG 1 PINION YOKE WASHER 1 PINION YOKE NUT

13 NOTES NEW PART NUMBER ANNOUNCEMENT AAM Aftermarket Sales would like to announce new Authentic Original Equipment Mopar rear 8.25 and 9.25 slip differentials. Applications include Dodge Ram, Full Size Van, Dakota and Durango, as well as Jeep Cherokee and Grand Cherokee. Part Number AD Chrysler 8.25 Rear Limited Slip Differential VEHICLE MYI MYO Dakota Durango Cherokee Grand Cherokee Part Number AA Chrysler 9.25 Rear Limited Slip Differential VEHICLE MYI MYO Ram Truck Full Size Van Dakota Durango

SAFETY INFORMATION WARRANTY!!! Warning Failure to follow these instructions could affect vehicle performance and/or safety and result in personal injury or death.

American Axle & Manufacturing axles are designed to meet OEM vehicle manufacturer s design and performance specifications.

14 SAFETY INFORMATION WARRANTY!!! Warning Failure to follow these instructions could affect vehicle performance and/or safety and result in personal injury or death. Do not convert or alter American Axle & Manufacturing axles except in accordance with vehicle manufacturer s instructions. American Axle & Manufacturing axles are designed to meet OEM vehicle manufacturer s design and performance specifications. Improper conversion or alteration of these axles can damage the axles and/or other vehicle systems. Contact the OEM manufacturer for specific directions and guidelines. Do not change axle gear ratios on vehicles with anti-lock braking systems except in accordance with the vehicle manufacturer s instructions. Vehicles with anti-lock braking systems may utilize sensors and tone rings with the axle housing to ensure the functioning of the anti-lock brakes. Improperly changing the axle ratios may defeat the anti-lock braking system. If changing axle ratios will require changing the location of the tone ring on the ring gear flange to the location of the sensor in the axle housing, contact the OEM manufacturer for specific directions and guidelines. Do not reuse or substitute ring gear bolts. If you reuse a ring gear bolt or substitute an inferior quality bolt, the bolt may loosen or back out of its threaded hole, causing severe damage to the axle gears and other components and possibly resulting in a sudden locking up of the axle and loss of control of the vehicle. Always use new bolts specifically recommended for the application and install bolts using proper tools and torquing to the proper specifications. CAUTION Use of non-american Axle & Manufacturing parts may result in product failure and personal injury. American Axle & Manufacturing axles are designed for each model vehicle, and manufactured and tested for safety and best performance. Replacement parts from other manufacturers may not be made to AAM s rigid quality standards. To be sure you re getting AAM quality, always use genuine AAM parts. This symbol warns of possible personal injury. AAM warrants its products to be free from defects in workmanship and materials for a period of one (1) year (or such shorter period to be consistent with the period of warranty provided to Company by the manufacturer or seller of the product to Company) from the date of shipment to distributor when such parts are used on vehicles the specifications of which have been approved by Company s Engineering Department. This limited warranty shall not be applicable when damage was caused by accident, abuse, improper maintenance, repair or improper installation. Company s liability under such warranty shall be limited to, at Company s option, repairing, replacing or giving credit for any products which, upon inspection by Company, are found by Company to have been defective in workmanship or materials. In no event will Company be liable for consequential, indirect, special or incidental damages. In the event that Company decides to repair or replace any product, distributor will arrange for the delivery of the defective products to the Company s premises. In the event that the product is found by the Company to be defective, the Company shall bear the cost of such delivery. OTHER THAN WARRANTY OF TITLE, THE AFORESAID WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, UNDER WHATEVER THEORY, AND COMPANY EXPRESSLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

Axle Components. Demand the original. Axle Components Driveshaft Components Repair Kits

Axle Components. Demand the original. Axle Components Driveshaft Components Repair Kits Axle Components Driveshaft Components Repair Kits Axle Components OE Quality Driveline Components Designed for Chrysler RAM Products www.demand.com Axle Components Driveshaft Components Repair Kits Only