WHEEL LOADERS INTEGRATED TOOL CARRIERS

Transcription

1 WHEEL LOADERS INTEGRATED TOOL CARRIERS PART B Caterpillar Performance Handbook Edition Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, Caterpillar Yellow, the Power Edge trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

2 Wheel Loaders Machine/Attachment Selection MACHINE/ATTACHMENT SELECTION The Integrated Toolcarrier s versatility and the wide range of attachments makes the single machine fleet concept highly attractive to an increasing number of users. A Job Analysis helps identify applications, work require ments, material handling parameters and the cur rent working method. Thoroughly research each ele ment in the following chart, the gathered infor mation will help select the proper Integrated Tool carrier System. MATERIALS HANDLED? JOB ANALYSIS METHOD WORK PROCESSES? CURRENT EQUIPMENT? APPROPRIATE INTEGRATED TOOLCARRIER MODEL SIZE NECESSARY ATTACHMENTS UTILIZATION & SEQUENCE? PRINCIPAL WORK Work Processes: The first step in the job analysis is to identify all work processes from start to finish. Key questions outlined below will begin to indicate the required attachments and potential Integrated Toolcarrier applications. What kinds of work are performed: (e.g., dozing, loading, stacking, digging, sweeping, handling special materials, etc.)... in site preparation?... below ground level?... at ground level?... above ground level?... in landscaping?... in maintenance equipment yard? etc. What work is done manually that could be done with an Integrated Toolcarrier? What are the work conditions?:... underfoot?... grades?... tight quarters?... time restraints?... climate? etc. Materials Handled: Examining the materials handled will assist in determining necessary attachments. Sizes and weights of mate rial(s) handled will indicate the appropriate Integrated Toolcarrier model by defining lift and reach require ments. Concentrate on the material flow at the job site the point of origin as well as the final destina tion for the various materials will undoubtedly have material handling requirements. What kinds of materials are handled (e.g. snow, earth, bricks, chemicals, pipe, logs, etc.) What form are the materials handled in: bulk? palletized? How much does each weigh? What are the dimensions of each? What are the... movement parameters:... dozed what distance?... load and carried what distance?... lifted how high?... placed below ground level?... placed what distance from machine? Edition 44

3 Machine/Attachment Selection Wheel Loaders Current Equipment: If determining material weight is not possible, much information can be determined from looking at the current equipment fleet. This will suggest required perfor mance capabilities such as lifting capacity. Machines currently doing the work (e.g. wheel loaders, lift trucks, sweepers, light capacity cranes, snow plows, etc.)? What special (maximum) capabilities does each machine have (production, lift height, load capacity, width/height dimensions, reach, turning radius, travel speed, etc.)? To what extent are each machine s maximum capabilities used? What are owning/operating costs of each? Utilization & Sequence: Utilization implies how often the current machines are used and what will be the utilization factors for the Integrated Toolcarrier with each individual attach ment. Sequence implies what order these tasks are accom plished in and if two or more machines operate at the same time. This portion of the job analysis should assist in compar ing economies of various systems. Other important con sid erations may be the number of operators needed, storage space, reduced maintenance requirements, etc. How often (what percent) is each machine used? How often and when does it sit idle? How often and when do two or more machines work at the same time? Can the operation be changed to permit single machine operation? Principal Work: Utilization and sequence will indicate the principal work the Integrated Toolcarrier will do, further assisting in attachment and model sizing and selection. The basic machine/tool package should be able to handle the toughest, most frequently performed jobs for the primary application. Secondary tools can have a little more give and take in their performance capabilities than the primary tool. What work can be accomplished by an Integrated Toolcarrier? What work will take up the majority of Integrated Toolcarrier time? What work will use the maximum static tipping capabilities of the Integrated Toolcarrier? What high cost (owning and operating) and/or low utilization machines can be replaced by an Inte grated Toolcarrier? Additional Tips for Tool Sizing and Selection Tool selection will principally concern hydraulic power requirements and static tipping load considerations. The standard tools offered by Caterpillar can be used on any Integrated Toolcarrier machine with little difficulty. However, tools such as the hydraulic broom, claws, blades and asphalt cutter will require additional consideration before proposing a system to the customer. Fork Rating Table indicates rated pallet fork load at standard ma chine configuration, 6 mm (24") load center, 12 mm (3'11") fork on IT14G2-93H, see operator manual to determine rated load for vehicle configuration being used. Model kg lb Model kg lb IT14G K High Lift K Standard K Standard K High Lift K High Lift K Standard Edition

4 Wheel Loaders Machine/Attachment Selection Bucket Rating Bucket capacity, SAE J742 FEB85 (nominally heaped) Table indicates rated load at vehicle configuration noted by the asterisks. See operator manual to determine rated load for vehicle configuration being used. 1.4 m 3 (1.75 yd 3 ) with Bolt-on Cutting Edge IT14G2* 2273 kg 5 lb 1.3 m 3 (1.7 yd 3 ) with Bolt-on Cutting Edge 91K 2145 kg 473 lb 1.5 m 3 (2. yd 3 ) with Bolt-on Cutting Edge 914K 239 kg 5269 lb 1.9 m 3 (2.5 yd 3 ) with Bolt-on Cutting Edge 924K*** Standard 371 kg 8179 lb 924K*** High Lift 2946 kg 6494 lb 2.1 m 3 (2.7 yd 3 ) with Bolt-on Cutting Edge 924K*** Standard 3671 kg 893 lb 924K*** High Lift 2725 kg 68 lb 2.1 m 3 (2.7 yd 3 ) with Bolt-on Cutting Edge 93K**** Standard 4185 kg 9226 lb 93K**** High Lift 2959 kg 6523 lb 2.3 m 3 (3. yd 3 ) with Bolt-on Cutting Edge 93K**** Standard 4146 kg 914 lb 93K**** High Lift 292 kg 6437 lb 2.5 m 3 (3.3 yd 3 ) with Bolt-on Cutting Edge 938K**** Standard 4764 kg 1,53 lb 938K**** High Lift 3451 kg 768 lb 2.7 m 3 (3.5 yd 3 ) with Bolt-on Cutting Edge 938K**** Standard 4719 kg 1,44 lb 938K**** High Lift 4589 kg 1,117 lb **** Specifications shown are for high-speed version IT14G2 and include lubri cants, full fuel tank, ROPS cab, 8 kg (176 lb) operator, standard 25 kg (55 lb) counterweight and 17.5-R25 (L-2 equivalent) tires. **** Specifications shown include lubricants, full fuel tank, limited slip axles, heavy duty rear brakes, optional counterweights, additional guarding, ROPS cab with A/C, 8 kg (176 lb) operator and 2.5-R25 (L-3) tires. **** Specifications shown include lubricants, full fuel tank, standard counterweights, additional guarding, 8 kg (176 lb) operator, and 2.5 R25 (L-3) XHA2 tires. **** Specifications shown include lubricants, full fuel tank, heavy counterweights, additional guarding, 8 kg (176 lb) operator, and 2.5 R25 (L-3) XHA2 tires. The charts explain each machine s maximum payload. The maximum material density would be determined by dividing the payload by the bucket capacity. If the actual material density exceeds the recommended material density, the process should be repeated to select the properly sized bucket. A similar procedure would be used with the forks and material handling arm to determine maximum rec ommended lifting capacity and/or required IT model size. Pallet Fork The pallet fork will fulfill many material handling needs. A modified Class 3 fork carriage provides visibility to the tines for precision pallet work. This carriage with non-standard spacing accepts many Class 3 lift truck attachments. Pallet fork rated operating loads are based on the following: SAE J1197 FEB91: 5% of the full turn static tipping load or the hydraulic/structural limitations. CEN (European standard): 6% of the full static tipping load on rough terrain or the hydraulic/ struc tural limitations. 8% of the full turn static tipping load on firm, level ground or the structural/hydraulic limitation. Other local, regional or international guidelines may also apply. If operation is on rough ground these criteria may need modification. In this instance, the size and rating of existing equipment should be considered. Sizing for pallet work generally consists of answering the following questions. 1. What are the average loaded pallet dimensions? 2. Lift Capacity what capacity is required to lift and move the average pallet load? The maximum pallet load? 3. Lift Height can the machine reach the top level of the standard pallet stack? What are the maxi mum reach, lift and height requirements? 4. Maneuverability can the machine work around the current aisle configuration? In the stacking aisles? Main aisles? Intersecting aisles? Are 9 turns required in any aisle for material placement? 5. Length what tine length is required to fit the commonly used pallets? (1219 mm [4'"] tines are standard length for most palletized material.) 6. Any machine height restrictions? 7. Any special fork configurations required? Lift capacity, lift height, aisle configuration and tine length are the most important considerations in recommending a pallet handling machine Edition 44

5 Machine/Attachment Selection Wheel Loaders Example problem: The following example applies the job analysis method to a work situation. Sewer & Water Contractor Sets water lines (152 mm-61 mm [6 in-24 in] iron pipe), sanitary sewer lines (152 mm-457 mm [6 in-18 in] PVC) and storm sewer lines (61 mm-167 mm [24 in- 42 in] concrete pipe) primarily in urban areas... oftentimes across or down existing streets. Materials Loam/Clay: 16 kg/m 3 (27 lb/yd 3 ) loose density Bedding (Gravel): Water Pipe: Storm Sewer: 19 kg/m 3 (32 lb/yd 3 ) loose density 61 mm (24 in) push-on joint ductile iron, 6.1 m (2 ft) sections, 139 kg (2885 lb) 215 kg/m (144.3 lb/ft) 6.1 m (2 ft). 167 mm (42 in), Wall B, concrete pipe, 1.5 m (5 ft) sections, 1556 kg (343 lb) 121 kg/m (686 lb/ft 5 ft). Manhole Boxes: 1361 kg (3 lb) WHAT INTEGRATED TOOLCARRIER MODEL SHOULD BE RECOMMENDED? WHICH ATTACHMENTS? Integrated Toolcarrier Work Processes Attachment Possibilities Bundled PVC and Forks/Material individual concrete/iron Handling Arm pipe-loaded/unloaded (yardsite) and strung along trench Unload, handle, set Material Handling Arm manhole boxes Excess excavated material Bucket truck loaded Bedding material handled/ Bucket placed Trench backfilled Bucket/Blade Trench compaction Compactor Wheel Rough and finish grading Bucket/Blade Street cleanup Bucket/Broom Pavement removal Rebar Snips/Asphalt Cutter Current Equipment Utilization Cat % Champ CB67 lift truck, 3175 kg (7 lb) capacity % Deere 444 with 1.1 m 3 (1.5 yd 3 ) G.P. bucket % Rosco D-5 sweeper one half hour/day Rammax 1361 kg (3 lb) self-propelled trench compactor % Machine sizing 135 mm (53 in) Forks Operating Load at Full Turn* Model kg lb IT14G K Standard K High Lift K Standard K High Lift K Standard K High Lift Water pipes: 139 kg (2885 lb) IT14G pipe no problem 924K Standard... 1 pipe no problem 924K High Lift... 1 pipe no problem 93K... 1 pipe no problem 93K High Lift... 1 pipe no problem 938K... 1 pipe no problem 938K High Lift... 1 pipe no problem Storm sewer pipes: 1556 kg (343 lb) IT14G pipe no problem 924K Standard... 1 pipe no problem 924K High Lift... 1 pipe no problem 93K... 1 pipe no problem 93K High Lift... 1 pipe no problem 938K... 1 pipe no problem 938K High Lift... 1 pipe no problem * Note that the most conservative operating load (SAE J1197 FEB91) is used here. The rated operating load for some competitive machines with pallet forks will be based upon European standard CEN 474-3, assuming operation on firm and level ground (i.e. using 8% of full turn static tipping load). 23 Edition

6 Wheel Loaders Machine/Attachment Selection Performance Series Buckets Move More Material with the Same Rated Capacity More material can be moved with a Performance Series Bucket compared to a same-size rated capacity current bucket. Likewise, a smaller Performance Series Bucket can be utilized to move the same amount of material as a larger rated capacity current bucket. Carries More Productive Bucket shape and strike plane angle are designed for material retention and consistent load sizes. More material loads into the bucket and is carried all the way to the truck, hopper or stockpile. A spill guard diverts overflow away from hinge pins, lift arms, hydraulic cylinders and tilt sensors help ing to protect these areas of the machine. Performance Series Buckets utilize a system-based approach to balance bucket shape against the machine s linkage, weight, lift and tilt capacities. The result is a bucket optimized for performance and productivity, and intended for use in production applications. Performance Series Buckets for Wheel Loaders are designed for use in truck loading, stockpiling and load-and-carry applications. Per formance is improved over current buckets in these production applications with materials such as sand, gravel and aggregates. Loads Easy Proven design characteristics improve material flow into the bucket and improve material retention during transport. In some situations, the number of passes required to fill a truck is reduced. Performance Series Buckets are designed for optimum performance on the machine. Profile changes (over current buckets) improve loadabil ity and make Performance Series Buckets machinespecific. Fuel Efficient Performance Series Buckets have a longer floor easily digging through the pile. Less time in the pile equals less fuel consumed. Higher Fill Factors When comparing buckets of the same rated capacity, Performance Series Buckets have higher fill factors up to 115%. Bucket Specifications Performance Series Buckets are designed to bring optimum performance to a specific machine. Profile changes over current buckets allow higher fill factors and increased production. Incompatibility on the 95H and 962H The recent linkage change on the 95K and 962K has created some incompatibility issues with the Fusion Per formance Series Buckets. Because the bucket shape has been optimized for the machine linkage, Fusion Performance Series Buckets designed for use on the 95K and 962K will experience interference with the linkage on the 95H and 962H. For this reason 95K and 962K Performance Series Buckets should NOT be used on the 95H and 962H machines. Incompatibility on the 966H/K/M Because 972H/K/M Performance Series Buckets are designed specifically for performance on the 972H/K/M their shape brings some incompatibilities with the 966H/K/M machine. These buckets can be pinned on to the 966H, but will experience interference with machine linkage in the rack back position. For this reason, 972H/K/M Performance Series Buckets should not be used on 966H/K/M machines. This is different than current General Purpose Buckets Edition 44

7 Machine/Attachment Selection Wheel Loaders Certain Bucket Sizes Require Additional Counterweight Compared to a current bucket of the same rated capacity, Performance Series Buckets will move more material. To maintain appropriate machine stability, 98H machines utilizing the two larger Performance Series Buckets must be equipped with the aggregate loader counterweight. This is required for machine stability based on the bucket size/fill factor combination. Compatible with G and G II machines Performance Series Buckets for 988-size machines are compatible with standard and high lift linkages on G and G II Series machines. Material Handling Arm (MHA) The rated load for the MHA is 5% of the full turn static tipping load in each position or hydraulic or structural limitations. Manually extendable telescopic sections enable maximum lifting capacity at the full retracted position, and maximum lift height and reach in the fully extended position. Operating Load at Full Turn Model Retracted Mid Extended IT14G2 137 kg 167 kg 8888 kg 321 lb 2373 lb 1958 lb 924K Standard Hook On 924K High Lift Hook On 93K Standard Hook On 93K High Lift Hook On 938K Standard Hook On 938K High Lift Hook On 193 kg 1614 kg 141 kg 4148 lb 3518 lb 355 lb 168 kg 1386 kg 1218 kg 3545 lb 356 lb 2685 lb 2158 kg 183 kg 1589 kg 5188 lb 434 lb 352 lb 1763 kg 1525 kg 1343 kg 3886 lb 3361 lb 2961 lb 2737 kg 2134 kg 1855 kg 632 lb 472 lb 488 lb 291 kg 188 kg 1593 kg 468 lb 3986 lb 3512 lb Storm sewer pipes: 1556 kg (343 lb) IT14G2... no 924K... yes in retracted and mid 93K... yes in retracted, mid, and extended 938K... yes in retracted, mid, and extended Manhole boxes: 1361 kg (3 lb) IT14G2... no 924K... yes in retracted and mid 93K... yes in retracted, mid, and extended 938K... yes in retracted, mid, and extended Buckets All general purpose buckets are interchangeable on 924K-938K due to common attachment points on the quick couplers. Bucket selection will depend on the material density in your application. Offering multiple sized buckets allows the user the flexibility to closely match material density and bucket size with machine capa bility. Equipping a machine with too large a bucket will result in unacceptable stability too small a bucket may provide inadequate tire coverage. Bucket 178 kg/m 3 (3 lb/yd 3 )... 1% fill factor 23 Edition

8 Wheel Loaders Machine/Attachment Selection Model Bucket Payload 5% Full Turn Static Tipping 924K* Hook On 1.9 m kg 371 kg 2.5 yd lb 8179 lb 2.1 m kg 3671 kg 2.7 yd lb 893 lb 2.3 m kg 3634 kg 3. yd lb 812 lb 93K* Hook On 2.1 m kg 4185 kg 2.7 yd lb 9226 lb 2.3 m kg 4146 kg 3. yd lb 914 lb 2.5 m kg 477 kg 3.3 yd lb 8988 lb 938K* Hook On 2.5 m kg 4764 kg 3.3 yd lb 1,53 lb 2.7 m kg 472 kg 3.5 yd 3 1,595 lb 1,46 lb 2.9 m kg 4684 kg 3.8 yd 3 11,38 lb 1,326 lb Machine/Attachment Recommendation 93K The greater static tipping load capabilities allow it to do a greater portion of the contractor s total work processes. With the following attach ments, the 93K could replace part or all of the specialty units, such as the wheel loader, rough terrain lift truck, street sweeper, and/or the trench compactor. 2.1 m 3 (2.75 yd 3 ), 2.3 m 3 (3. yd 3 ), or 2.5 m 3 (3.25 yd 3 ) General Purpose Bucket 135 mm (53 in) forks (handles all pipes) Material Handling Arm (handles pipe sizes under 167 mm (42 in) concrete and manhole boxes would have to set 1219 mm (48 in) and larger concrete pipe Broom Optional Attachments to Consider: 24-LH compactor wheel Rebar snips Asphalt cutter NOTE: Metric numbers are a product of conversion. **924K, 93K, and 938K equipped with Michelin 2.5-R25 XHA2 tires. **924H and 93H equipped with Michelin 2.5-R25 XHA tires Edition 44

9 Buckets Americas North Wheel Loaders Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 924K Fusion General Purpose Performance Series J25/BOCE Light Material J25/BOCE Multi-Purpose BOCE Side Dump BOCE Included Pin On High Dump BOCE Included Grapple J25/BOCE Waste BOCE Included Woodchip BOCE Included Grading BOCE Included General Purpose Performance Series J25/BOCE Light Material J25/BOCE High Dump BOCE Included Sand and Gravel Doze BOCE Load & Carry BOCE 93K Fusion General Purpose Performance Series J25/BOCE Light Material J25/BOCE Multi-Purpose BOCE Side Dump BOCE Included Pin On High Dump BOCE Included Grapple J25/BOCE Waste BOCE Included Woodchip BOCE Included Grading BOCE Included General Purpose Performance Series J25/BOCE Sand and Gravel J25/BOCE Light Material J25/BOCE High Dump BOCE Included Doze BOCE Load & Carry BOCE 23 Edition

10 Wheel Loaders Buckets Americas North Model Interface Bucket Type 938K Fusion General Purpose Performance Series 95K 962K Pin On Fusion Pin On Width Range Capacity Range Weight Range mm in m 3 yd 3 kg lb GET J25/BOCE Light Material J25/BOCE Multi-Purpose BOCE Side Dump BOCE Included High Dump BOCE Included Grapple J25/BOCE Waste BOCE Included Woodchip BOCE Included Grading BOCE Included General Purpose Performance Series J25/BOCE Sand and Gravel J25/BOCE Light Material BOCE Included High Dump BOCE Included Doze BOCE Load & Carry BOCE General Purpose Performance Series K8/BOCE Material Handling Performance Series K8/BOCE Rock Performance Series K9 Multi-Purpose BOCE Included Side Dump BOCE Included High Dump BOCE Included Grapple BOCE Included Waste BOCE Included Woodchip BOCE Included General Purpose Performance Series K8/BOCE Material Handling Performance Series K8/BOCE Rock Performance Series K9 Multi-Purpose BOCE Included Side Dump BOCE Included High Dump BOCE Included Grapple BOCE Included Waste BOCE Included Woodchip BOCE Included Doze BOCE Load & Carry BOCE Edition 44

11 Buckets Americas North Wheel Loaders Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 966K Fusion General Purpose 966M Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Coal Performance Series BOCE Included Rock Performance Series K9 Multi Purpose BOCE Included Side Dump BOCE Included High Dump BOCE Included Grapple K9 Waste BOCE Included Woodchip BOCE Included Doze BOCE Included Load & Carry BOCE Included Pin On General Purpose Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Coal Performance Series BOCE Included Rock Performance Series K9 Heavy Duty Rock J35/K9 Multi Purpose K9 Side Dump BOCE Included Waste BOCE Included Woodchip BOCE Included 23 Edition

12 Wheel Loaders Buckets Americas North Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 972K Fusion General Purpose 972M Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Coal Performance Series BOCE Included Rock Performance Series K9 Multi Purpose BOCE Included Side Dump BOCE Included High Dump BOCE Included Grapple K9 Waste BOCE Included Woodchip BOCE Included Doze BOCE Included Load & Carry BOCE Included Pin On General Purpose Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Coal Performance Series BOCE Included Rock Performance Series K9 Heavy Duty Rock J35/K9 Multi Purpose K9 Side Dump BOCE Included Waste BOCE Included 966K 972K Woodchip BOCE Included Slag K1 Fusion Multi-Purpose BOCE Included Side Dump BOCE Included High Dump BOCE Included Grapple K9 Waste BOCE Included Woodchip BOCE Included Pin On Heavy Duty Rock K9/J35 Multi-Purpose BOCE Included Side Dump BOCE Included Waste BOCE Included Woodchip BOCE Included Edition 44

13 Buckets Americas North Wheel Loaders Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 98K Pin On General Purpose Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Coal Performance Series BOCE Included Rock Performance Series K9 Heavy Duty Quarry Rock BOCE Included Waste BOCE Included Woodchip BOCE Included Doze BOCE Included Load & Carry BOCE Included Slag ,689 K13 986H Pin On Rock K11 988K Pin On General Purpose Performance Series ,7-11,1 K11 Rock Performance Series ,759-11,63 K13 Heavy Duty Rock Performance Series ,21 K13 Heavy Duty Granite Performance Series ,385 K13 Serrated Edge Rock ,26-12,421 Iron Ore ,723 K13 Coal Slag ,278-15,4 BOCE Included ,828-18,638 J6/Serrated Edge 23 Edition

14 Wheel Loaders Buckets Americas North Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 988H Pin On General Purpose Performance Series ,138-11,845 K11/BOCE General Purpose ,773 BOCE Included Rock Performance Series ,877-11,713 K13 Rock K11 Heavy Duty Rock Performance Series ,966 K13 Heavy Duty Granite ,826 K13 Slag Coal ,84-16,837 K13/J6/ Weld-on edge ,3-15,4 BOCE Included Coal Seam J46/BOCE Iron Ore ,7 K13 Serrated Edge Rock ,54 N/A 99H Pin On Rock Performance Series ,977-16,528 K13 Heavy Duty Rock Performance Series ,798 K13 Heavy Duty Granite Performance Series ,245 K15 N/A = Not Applicable Slag ,127-21,149 Weld-on edge included Coal ,41 BOCE Included Iron Ore ,75 K15 Serrated Edge Rock ,91 N/A Edition 44

15 Buckets Americas North Wheel Loaders Model Interface Bucket Type 992K Pin On Rock Width Range Capacity Range Weight Range mm in m 3 yd 3 kg lb GET ,684-23,262 K15/K17 Heavy Duty Rock ,485 K17 High Abrasion Rock ,295 K15 Heavy Duty Granite ,247 K15 Coal ,56 BOCE Included Iron Ore ,577 K15 Serrated Edge Rock ,62 N/A 993K Pin On Rock ,31-31,26 K17 High Abrasion Rock ,451-34,4 K17 Heavy Duty Granite ,32 K17 Coal ,88 K17 Iron Ore ,94 K17 Serrated Edge Rock ,615 N/A 994H Pin On N/A = Not Applicable Rock Coal ,465-47,99 J ,864-51,916 J7/ Weld-on edge 23 Edition

16 Wheel Loaders Buckets Americas South Model Interface Bucket Type Width Range Capacity Range Weight Range mm in m 3 yd 3 kg lb 924K Fusion General Purpose J25/BOCE Light Material BOCE Multi-Purpose J25/BOCE High Dump BOCE Pin On General Purpose J25/BOCE Sand and Gravel J25/BOCE Light Material BOCE High Dump BOCE 93K Fusion General Purpose J25/BOCE Light Material BOCE Multi-Purpose J25/BOCE High Dump BOCE Pin On General Purpose J25/BOCE Sand and Gravel J25/BOCE Light Material BOCE High Dump BOCE 938K Fusion General Purpose J25/BOCE Light Material BOCE Multi-Purpose J25/BOCE High Dump BOCE Pin On General Purpose J25/BOCE Sand and Gravel J25/BOCE Light Material BOCE High Dump BOCE GET Edition 44

17 Buckets Americas South Wheel Loaders Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 95H Fusion General Purpose 962H Performance Series K8/BOCE Material Handling K8/BOCE Coal BOCE Rock K9 Multi-Purpose BOCE Included Side Dump BOCE Included High Dump BOCE Included Grapple K8/BOCE Waste BOCE Included Woodchip BOCE Included Pin On General Purpose Performance Series K8/BOCE Material Handling Performance Series K8/BOCE Coal Performance Series TBD BOCE Included Rock Performance Series K9 Multi-Purpose BOCE Included Side Dump BOCE Included Waste BOCE Included Woodchip BOCE Included 966H Fusion General Purpose Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Coal Performance Series BOCE Included Rock Performance Series K9 Pin On General Purpose Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Coal Performance Series BOCE Included Rock Performance Series K9 23 Edition

18 Wheel Loaders Buckets Americas South Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 972H Fusion General Purpose Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Coal Performance Series BOCE Included Rock Performance Series K9 Pin On General Purpose Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Coal Performance Series BOCE Included Rock Performance Series K9 966H 972H Fusion Multi-Purpose BOCE Included Side Dump BOCE Included High Dump BOCE Included Grapple K9/BOCE Waste BOCE Included Woodchip BOCE Included Pin On Heavy Duty Rock K9/J35 Multi-Purpose BOCE Included Side Dump BOCE Included Waste BOCE Included Woodchip BOCE Included 98H Pin On General Purpose Performance Series K1/BOCE Material Handling Performance Series K1/BOCE Coal Performance Series BOCE Included Rock Performance Series K1 Heavy Duty General Purpose BOCE Heavy Duty Quarry Rock K11 Slag ,689 K13 Waste BOCE Included Woodchip BOCE Included Edition 44

19 Buckets Americas South Wheel Loaders Model Interface Bucket Type Width Range Capacity Range Weight Range mm in m 3 yd 3 kg lb 986H Pin On Rock K11 988H Pin On General Purpose Performance Series ,861-11,47 K11/BOCE General Purpose ,773 BOCE Included Rock Performance Series ,531-11,341 K13 Rock K11 Heavy Duty Rock Performance Series ,686 K13 Heavy Duty Granite ,826 K13 K13/J6/ Slag ,84-16,837 Weld-on Edge Coal ,3-15,4 BOCE Included Coal Seam J46/BOCE Iron Ore ,7 K13 Serrated Edge Rock ,54 N/A 988K Pin On General Purpose Performance Series ,7-11,1 K11 Rock Performance Series ,759-11,63 K13 Heavy Duty Rock Performance Series ,21 K13 Heavy Duty Granite Performance Series ,385 K13 N/A = Not Applicable Serrated Edge Rock GET 12,26-12,421 Iron Ore ,723 K13 Coal Slag ,278-15,4 BOCE Included 16,828-18,638 J6/Serrated Edge 23 Edition

20 Wheel Loaders Buckets Americas South Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 99H Pin On Rock Performance Series ,977-16,528 K13 Heavy Duty Rock Performance Series ,798 K13 Heavy Duty Granite Performance Series ,52 K15 Slag ,54-2,79 Weld-on Edge Included Coal ,41 BOCE Included Iron Ore ,48 K15 Serrated Edge Rock ,94 N/A 992K Pin On Rock ,684-23,262 K15/K17 Heavy Duty Rock ,485 K17 High Abrasion Rock ,295 K15 Heavy Duty Granite ,247 K15 Coal ,56 BOCE Included Iron Ore ,577 K15 Serrated Edge Rock ,62 N/A 993K Pin On Rock ,31-31,26 K17 High Abrasion Rock ,451-34,4 K17 Heavy Duty Granite ,32 K17 Coal ,88 K17 Iron Ore ,94 K17 Serrated Edge Rock ,615 N/A 994H Pin On Rock ,465-47,99 J8 Coal ,864-51,916 J7/Weld-on Edge N/A = Not Applicable Edition 44

21 Buckets Europe, Africa, Middle East Wheel Loaders Model Interface Bucket Type Width Range Capacity Range Weight Range mm in m 3 yd 3 kg lb 924K Fusion General Purpose J25/BOCE Light Material J25/BOCE Multi-Purpose BOCE High Dump BOCE ISO General Purpose J25/BOCE Grading BOCE Light Material J25/BOCE High Dump BOCE Pin On General Purpose J25/BOCE Light Material J25/BOCE High Dump BOCE Sand & Gravel J25/BOCE 93K Fusion General Purpose J25/BOCE Light Material J25/BOCE Multi-Purpose BOCE High Dump BOCE ISO General Purpose J25/BOCE Grading BOCE Light Material J25/BOCE High Dump BOCE Pin On General Purpose J25/BOCE Light Material J25/BOCE High Dump BOCE Sand & Gravel BOCE 938K Fusion General Purpose J25/BOCE Light Material J25/BOCE Multi-Purpose BOCE High Dump BOCE ISO General Purpose J25/BOCE Grading BOCE Light Material J25/BOCE High Dump BOCE Pin On General Purpose J25/BOCE Light Material BOCE High Dump BOCE Sand & Gravel J25/BOCE GET 23 Edition

22 Wheel Loaders Buckets Europe, Africa, Middle East Model Interface Bucket Type 95K Fusion General Purpose Performance Series Width Range Capacity Range Weight Range GET mm in m 3 yd 3 kg lb K8/BOCE Material Handling Performance Series K8/BOCE Pin On General Purpose Performance Series K8/BOCE Material Handling Performance Series K8/BOCE Rock Performance Series K9 962K Fusion General Purpose Performance Series K8/BOCE Material Handling Performance Series K8/BOCE Pin On General Purpose Performance Series K8/BOCE Material Handling Performance Series K8/BOCE Rock Performance Series K9 966K Fusion General Purpose Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Rock Performance Series K9 Pin On General Purpose Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Rock Performance Series K9 972K Fusion General Purpose Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Rock Performance Series K9 Pin On General Purpose Performance Series K9/BOCE Material Handling Performance Series K9/BOCE Rock Performance Series K9/K1 98K Pin On General Purpose Performance Series K1/BOCE Material Handling Performance Series K1/BOCE Rock Performance Series K1/K Edition 44

23 Buckets Europe, Africa, Middle East Wheel Loaders Model Interface Bucket Type Width Capacity GET mm in m 3 yd 3 988H Pin On General Purpose Straight General Purpose Straight Rock Spade Rock Spade Rock Spade Rock Spade Heavy Duty Rock Spade Heavy Duty Granite Spade Iron Ore Spade Serrated Edge V-Serrated Serrated Edge V-Serrated Coal Straight Coal Straight Slag Serrated Slag Spade Slag Straight Slag Straight 99H Pin On Rock Spade Rock Spade Heavy Duty Rock Spade Heavy Duty Granite Spade Iron Ore Spade Serrated Edge V-Edge Serrated Edge V-Edge Serrated Edge Serrated Spade Coal Straight Slag Serrated Spade Slag Serrated Spade 992G Pin On Serrated Edge V-Serrated Serrated Edge V-Serrated 992K Pin On Rock Spade Rock Spade Rock Spade Heavy Duty Rock Spade Heavy Duty Granite Spade Iron Ore Spade Serrated Edge V-Serrated Coal Straight 23 Edition

24 Wheel Loaders Buckets Europe, Africa, Middle East Model Interface Bucket Type Width Capacity GET mm in m 3 yd 3 993K Pin On Rock Spade Rock Spade Rock Spade Rock Spade High Abrasion Spade High Abrasion Spade Heavy Duty Granite Spade Iron Ore Spade Serrated Edge V-Serrated Coal Straight 994F Pin On Rock Spade Rock Spade Rock Spade Rock Spade Rock Spade Coal Straight Coal V-Serrated Edition 44

25 Buckets Europe, Africa, Middle East High Dump Buckets Wheel Loaders Dump Clearance Maximum Material Density Model Capacity Width Weight Standard Lift High Lift Standard Lift High Lift m 3 yd 3 mm in kg lb mm in mm in kg/m 3 lb/yd 3 kg/m 3 lb/yd 3 95H K H K H , K , H , K , Edition

26 Wheel Loaders Buckets Australia/New Zealand Model Interface Bucket Type Width Range Capacity Range Weight Range mm in m 3 yd 3 kg lb 924K Fusion General Purpose J25/BOCE Light Material BOCE Multi-Purpose J25/BOCE Side Dump BOCE High Dump BOCE Grapple J25/BOCE Waste BOCE Woodchip BOCE Grading BOCE ISO General Purpose J25/BOCE Pin On General Purpose J25/BOCE Sand and Gravel J25/BOCE Light Material BOCE High Dump BOCE 93K Fusion General Purpose J25/BOCE Light Material BOCE Multi-Purpose J25/BOCE Side Dump BOCE High Dump BOCE Grapple J25/BOCE Waste BOCE Woodchip BOCE Grading BOCE ISO General Purpose J25/BOCE Pin On General Purpose J25/BOCE Sand and Gravel J25/BOCE Light Material BOCE High Dump BOCE 938K Fusion General Purpose J25/BOCE Light Material BOCE Multi-Purpose J25/BOCE Side Dump BOCE High Dump BOCE Grapple J25/BOCE Waste BOCE Woodchip BOCE Grading BOCE ISO General Purpose J25/BOCE Pin On General Purpose J25/BOCE Sand and Gravel J25/BOCE Light Material BOCE High Dump BOCE GET Edition 44

27 Buckets Australia/New Zealand Wheel Loaders Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb IT62G HPL Material Handling K8X8 Material Handling K8X8 Woodchip N/A 95H, 95G, 962H, 926G N/A = Not Applicable Pin On General Purpose Performance Series K8X8 General Purpose Performance Series K8X8 Material Handling Performance Series K8X8 Material Handling Performance Series K8X8 Material Handling Performance Series K8X8 General Purpose K8X8 General Purpose K8X8 Material Handling K8X8 Material Handling K8X8 Material Handling N/A N/A K8X8 Rock N/A Rock N/A Woodchip N/A HPL General Purpose K8X8 General Purpose K8X8 General Purpose K8X8 Woodchip N/A Fusion General Purpose K8X8 General Purpose K8X8 General Purpose K8X8 Rock K9X8 Rock K9X8 Material Handling K8X8 Material Handling K8X8 Coal N/A Multi-purpose N/A Side Dump N/A High Dump N/A Grapple N/A Waste N/A Woodchip N/A 23 Edition

28 Wheel Loaders Buckets Australia/New Zealand Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb 966, 972 N/A = Not Applicable Pin On General Purpose Performance Series K9X8 General Purpose Performance Series K9X8 General Purpose Performance Series K9X8 General Purpose Performance Series K9X8 General Purpose Performance Series K9X8 Material Handling Performance Series K9X8 Material Handling Performance Series K9X8 Material Handling Performance Series K9X8 Rock Performance Series K9X8 Rock Performance Series K9X8 General Purpose K9X8 General Purpose N/A Material Handling K9 Material Handling K9 Material Handling N/A Material Handling N/A Rock N/A N/A K9X8 Rock N/A N/A J35X8 Rock N/A N/A K9X8 Heavy Duty Rock J35 Heavy Duty Rock K9 Heavy Duty Rock K9 Woodchip N/A Woodchip N/A Woodchip N/A HPL General Purpose K9X8 General Purpose K9X8 General Purpose K9X8 Woodchip N/A Woodchip N/A Edition 44

29 Buckets Australia/New Zealand Wheel Loaders Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb 966, H, 98G N/A = Not Applicable Fusion General Purpose K9X8 General Purpose K9X8 General Purpose K9X8 Rock/Spade N/A N/A K9X8 Rock/Spade N/A N/A K9X8 Material Handling K9X8 Material Handling K9X8 Coal K9X8 Coal K9X8 Multi-purpose N/A N/A N/A Side Dump N/A N/A N/A High Dump N/A N/A N/A Grapple N/A N/A N/A Waste N/A N/A N/A Woodchip N/A Pin On General Purpose Performance Series K1X8 General Purpose Performance Series K1X8 General Purpose Performance Series K1X8 Material Handling Performance Series K1X8 Rock Performance Series N/A N/A K1X8 Rock Performance Series N/A N/A K1X8 General Purpose K1X8 General Purpose K1X8 General Purpose K1X8 General Purpose N/A N/A K1X8 General Purpose K1X8 General Purpose K1X8 General Purpose-HD K1X8 Material Handling K1X8 Material Handling K1X8 Rock N/A N/A J4X8 Rock N/A N/A K1X8 Rock N/A N/A J4X8 Rock N/A N/A K1X8 Coal N/A N/A N/A Woodchip N/A N/A N/A Pin On Coal K11 Coal ,29 BOCE Included Coal ,944 BOCE Included General Purpose K11 General Purpose ,516 BOCE Included Rock ,615 K13 Rock ,278 K11 Rock ,141 K11 23 Edition

30 Wheel Loaders Buckets Australia/New Zealand Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb 99H Pin On Rock ,93 K13 Rock ,516 K13 Heavy Duty Rock ,947 K13 MAWPs Heavy Duty Granite ,89 K15 MAWPs Slag ,193 Serrated Slag ,17 K13 Coal ,446 BOCE Included Slag ,794 K15 Serrated Edge Rock ,946 N/A 992K Pin On Rock ,684 K15 Rock ,552 K17 Rock ,7 K15 Rock ,312 K17 Heavy Duty Rock ,485 K17 High Abrasion Rock ,295 K15 Heavy Duty Granite ,247 K15 Coal ,567 BOCE Included Iron Ore ,63 K15 Serrated Edge Rock ,668 N/A 992G Pin On Coal ,694 K13 Rock ,522 K15 Rock N/A N/A K13 Rock N/A N/A K15 Rock ,836 K15 Rock ,394 K17 Rock ,737 K17 Heavy Duty Granite ,52 K15 993K Pin On Rock ,36 K17 Rock ,498 K17 Rock ,918 K17 Rock ,325 K17 High Abrasion Rock ,521 K17 High Abrasion Rock ,75 K17 Heavy Duty Granite ,4 K17 Coal ,962 K17 Iron Ore ,4 K17 Serrated Edge Rock ,677 N/A 994F Pin On Rock ,554 J8 Rock ,45 J8 Rock ,919 J8 Rock ,238 J8 Rock ,1 J8 Coal ,967 J7 Coal ,25 Serrated N/A = Not Applicable Edition 44

31 Buckets Southeast Asia Wheel Loaders Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb IT62G HPL Material Handling K8X8 Woodchip N/A 95H, 95G, 962H, 962G 966, 972 N/A = Not Applicable Pin On General Purpose K8X8 General Purpose K8X8 Material Handling K8X8 Material Handling K8X8 Material Handling K8X8 General Purpose K8X8 General Purpose K8X8 Material Handling N/A Material Handling N/A Material Handling N/A N/A K8X8 Waste Handling N/A HPL Woodchip N/A Pin On General Purpose K9X8 General Purpose K9X8 General Purpose K9X8 General Purpose K9X8 General Purpose K9X8 Material Handling K9X8 Material Handling K9X8 Material Handling K9X8 Rock K9X8 Rock K9X8 General Purpose K9X8 General Purpose K9X8 General Purpose K9X8 Material Handling N/A Material Handling N/A Rock N/A N/A K9X8 Woodchip N/A HPL General Purpose K9X8 General Purpose K9X8 23 Edition

32 Wheel Loaders Buckets Southeast Asia Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb 98H, 98G 988H, 988G Pin On General Purpose K1X8 General Purpose K1X8 General Purpose K1X8 Material Handling K1X8 Rock N/A N/A K1X8 Rock N/A N/A K1X8 General Purpose K1X8 General Purpose K1X8 Rock N/A N/A J4X8 Coal N/A N/A N/A HPL General Purpose K1X8 BH Block Handler K1X8 Pin On Coal K11 Coal BOCE Included Coal BOCE Included Rock K11 Rock K11 99H Pin On Rock K13 Rock K13 Heavy Duty Granite K15 MAWPs Slag Serrated Weld-On Edge Slag K13 992K Pin On Rock K15 Rock K17 Rock K15 Rock K17 Heavy Duty Rock K17 High Abrasion Rock K15 Heavy Duty Granite K15 Serrated Edge Rock N/A 992G Pin On Rock N/A N/A K13 Rock N/A N/A K15 Rock K15 Rock K17 Heavy Duty Granite K15 993K Pin On Rock K17 Rock K17 High Abrasion Rock K17 Heavy Duty Granite K17 Coal K17 Iron Ore K17 994F Pin On Rock J8 Rock J8 Rock J8 Coal ,75 J7 Coal ,74 Serrated Weld-On Edge N/A = Not Applicable Edition 44

33 Buckets China Wheel Loaders Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb IT62G IT Woodchip N/A 95H, 95G, 962H, 962G 966G, 972G Pin On N/A = Not Applicable General Purpose Performance Series K8X8 General Purpose Performance Series K8X8 Material Handling Performance Series K8X8 Material Handling Performance Series K8X8 Material Handling Performance Series K8X8 General Purpose K8X8 General Purpose K8X8 Material Handling N/A Material Handling N/A Material Handling N/A K8X8 Waste Handling N/A Rock J35X8 General Purpose Performance Series K9X8 General Purpose Performance Series K9X8 General Purpose Performance Series K9X8 General Purpose Performance Series K9X8 General Purpose Performance Series K9X8 Material Handling Performance Series K9X8 Material Handling Performance Series K9X8 Material Handling Performance Series K9X8 Rock Performance Series K9X8 Rock Performance Series K9X8 General Purpose K9X8 General Purpose K9X8 General Purpose K9X8 Material Handling K9X8 Material Handling K9X8 Material Handling N/A Rock K9X8 Side Dump K8X8 23 Edition

34 Wheel Loaders Buckets China Model Interface Bucket Type Width Capacity Weight Range GET mm in m 3 yd 3 kg lb 98H, Pin On General Purpose K1X8 98G Performance Series General Purpose K1X8 Performance Series General Purpose K1X8 Performance Series Material Handling K1X8 Performance Series Rock Performance Series K1X8 Rock Performance Series K1X8 General Purpose K1X8 HPL Block Handler K1X8 986H Pin On Rock J46 988H, 988G Pin On Coal K11 Coal ,29 BOCE Included Coal ,944 BOCE Included General Purpose ,516 BOCE Included Rock ,615 K13 Rock ,278 K11 Rock ,141 K11 99H Pin On Rock ,93 K13 Rock ,516 K13 Heavy Duty Rock ,947 K13 MAWPs Heavy Duty Granite ,89 K15 MAWPs Slag ,193 Serrated Weld-On Edge Slag ,17 K13 992K Pin On Rock ,684 K15 Rock ,552 K17 Rock ,7 K15 Rock ,312 K17 Heavy Duty Rock ,485 K17 High Abrasion Rock ,295 K15 Heavy Duty Granite ,247 K15 Serrated Edge Rock ,668 N/A 992G Pin On Rock N/A N/A K13 Rock N/A N/A K15 Rock ,836 K15 Rock ,737 K17 Heavy Duty Granite ,52 K15 993K Pin On Rock ,36 K17 Rock ,325 K17 High Abrasion Rock ,75 K17 Heavy Duty Granite ,4 K17 Coal ,962 K17 Iron Ore ,4 K17 994F Pin On Rock ,45 J8 Rock ,367 J8 Coal ,967 J7 Coal ,25 Serrated Weld-On Edge N/A = Not Applicable Edition 44

35 Bucket Selection 96H2 914G2 Wheel Loaders 96H2 Vertical Coupler Bucket Type Rated Capacity Maximum Material Density m 3 yd 3 kg/m 3 lb/yd 3 General Purpose Light Material Multi-Purpose H2 Horizontal Coupler Bucket Type Rated Capacity Maximum Material Density m 3 yd 3 kg/m 3 lb/yd 3 General Purpose Light Material Multi-Purpose H2 Vertical Coupler Bucket Type Rated Capacity Maximum Material Density m 3 yd 3 kg/m 3 lb/yd 3 General Purpose Light Material Multi-Purpose H2 Horizontal Coupler Bucket Type Rated Capacity Maximum Material Density m 3 yd 3 kg/m 3 lb/yd 3 General Purpose Light Material Multi-Purpose H2 Vertical Coupler Bucket Type Rated Capacity Maximum Material Density m 3 yd 3 kg/m 3 lb/yd 3 General Purpose Light Material Multi-Purpose H2 Horizontal Coupler Bucket Type Rated Capacity Maximum Material Density m 3 yd 3 kg/m 3 lb/yd 3 General Purpose Light Material Multi-Purpose yd 3 m 3 914G2 BUCKET CAPACITY MATERIAL DENSITY (THOUSANDS) kg/m 3 lb/yd 3 KEY A 1.4 m 3 (1.8 yd 3 ) General Purpose Bucket, bolt-on edge 1.4 m 3 (1.8 yd 3 ) General Purpose Bucket, bolt-on teeth and segments B 1.3 m 3 (1.7 yd 3 ) General Purpose Bucket, bolt-on edge 1.3 m 3 (1.7 yd 3 ) General Purpose Bucket, bolt-on teeth and segments 1.3 m 3 (1.7 yd 3 ) General Bucket, bolt-on teeth 1.3 m 3 (1.7 yd 3 ) General Purpose Bucket, flush mounted teeth C 1.2 m 3 (1.6 yd 3 ) General Purpose Bucket, bolt-on teeth Edition

36 Wheel Loaders Bucket Selection 924K Bucket Size yd 3 m 3 924K Fusion kg/m 3 Bucket Size 924K Pin On kg/m 3 yd 3 m 3 BUCKET CAPACITY BUCKET CAPACITY MATERIAL DENSITY lb/yd 3 lb/yd 3 MATERIAL DENSITY % = Bucket Fill Factor 115% 1% 95% KEY A Standard Lift B High Lift Edition 44

37 Bucket Selection 93K Wheel Loaders Bucket Size yd 3 m 3 93K Fusion kg/m 3 BUCKET CAPACITY 23 lb/yd 3 MATERIAL DENSITY 93K Pin On Bucket Size kg/m 3 yd 3 m 3 BUCKET CAPACITY lb/yd 3 MATERIAL DENSITY % = Bucket Fill Factor 115% 1% 95% KEY A Standard Lift B High Lift Edition

38 Wheel Loaders Bucket Selection 938K Bucket Size yd 3 m 3 938K Fusion kg/m 3 Bucket Size yd 3 m 3 938K Pin On kg/m 3 BUCKET CAPACITY BUCKET CAPACITY MATERIAL DENSITY lb/yd 3 MATERIAL DENSITY lb/yd 3 % = Bucket Fill Factor 115% 1% 95% KEY A Standard Lift B High Lift Edition 44

39 Bucket Selection 924K (LRC) Wheel Loaders Bucket Fill Factor General Purpose Pin On Fusion 924K (LRC) kg/m lb/yd m3 yd % 18% 15% 11% 98% % 18% 13% 1% 96% % 11% 15% 11% 97% % 17% 13% 99% 95% % 19% 14% 1% 96% % 13% 99% 94% 23 Bucket Fill Factor Light Material Pin On Fusion kg/m lb/yd m3 yd % 18% 13% 98% % 13% 97% % 19% 13% 98% % 15% 98% Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 1% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing. 924K (LRC) Fill Factors Materials Density Fill % Earth and rock ~ 18 kg/m3 ~ 333 lb/yd3 ~ 115% Sand and gravel ~ 17 kg/m3 ~ 2865 lb/yd3 ~ 115% Aggregates ~ 16 kg/m3 ~ 2696 lb/yd3 ~ 15% Bulk grains ~ 75 kg/m3 ~ 1264 lb/yd3 ~ 1% Woodchips ~ 5 kg/m3 ~ 843 lb/yd3 ~ 1% Edition

40 Wheel Loaders Bucket Selection 93K (LRC) 93K (LRC) Bucket Fill Factor General Purpose Pin On Fusion kg/m lb/yd High Lift m3 yd3 kg/m3 lb/yd % 16% 12% 98% 95% % 19% 14% 1% 96% % 18% 13% 98% 94% % 11% 15% 11% 97% % 19% 14% 99% 95% % 19% 14% 99% 94% Bucket Fill Factor Light Material Pin On Fusion kg/m lb/yd High Lift m3 yd3 kg/m3 lb/yd % 18% 12% 96% % 12% 96% % 13% 97% % 14% 97% Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 1% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing. 93K (LRC) Fill Factors Materials Density Fill % Earth and rock ~ 18 kg/m 3 ~ 333 lb/yd3 ~ 115% Sand and gravel ~ 17 kg/m 3 ~ 2865 lb/yd3 ~ 115% Aggregates ~ 16 kg/m 3 ~ 2696 lb/yd3 ~ 15% Bulk grains ~ 75 kg/m 3 ~ 1264 lb/yd3 ~ 1% Woodchips ~ 5 kg/m 3 ~ 843 lb/yd3 ~ 1% Edition 44

41 Bucket Selection 938K (LRC) Wheel Loaders Bucket Fill Factor General Purpose Pin On Fusion 938K (LRC) kg/m lb/yd High Lift m3 yd3 kg/m3 lb/yd % 16% 12% 98% 95% % 16% 12% 98% % 18% 13% 98% % 16% 11% 97% % 16% 11% 97% % 18% 13% 98% Bucket Fill Factor Light Material Pin On Fusion kg/m lb/yd High Lift m3 yd3 kg/m3 lb/yd % 18% 13% 98% % 17% 11% 95% % 18% 13% 98% % 18% 11% 96% Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 1% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing. 938K (LRC) Fill Factors Materials Density Fill % Earth and rock ~ 18 kg/m 3 ~ 333 lb/yd3 ~ 115% Sand and gravel ~ 17 kg/m 3 ~ 2865 lb/yd3 ~ 115% Aggregates ~ 16 kg/m 3 ~ 2696 lb/yd3 ~ 15% Bulk grains ~ 75 kg/m 3 ~ 1264 lb/yd3 ~ 1% Woodchips ~ 5 kg/m 3 ~ 843 lb/yd3 ~ 1% Edition

42 Wheel Loaders Bucket Selection 95K 95K Material Density kg/m m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Pin On 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Standard Linkage 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Fusion QC 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability Edition 44

43 Bucket Selection 95K Wheel Loaders 95K Material Density kg/m m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Pin On 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) High Lift Linkage 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Fusion QC 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Edition

44 Wheel Loaders Bucket Selection 95K 95K Material Density kg/m m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Pin On 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Power Package 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Fusion QC 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability Edition 44

45 Bucket Selection 962K Wheel Loaders 962K Material Density kg/m m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Pin On 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Standard Linkage 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Fusion QC 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Edition

46 Wheel Loaders Bucket Selection 962K 962K Material Density kg/m m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Pin On 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) High Lift Linkage 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Fusion QC 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability Edition 44

47 Bucket Selection 966M Wheel Loaders 966M Material Density kg/m m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) General Purpose 4. m3 (5.23 yd3) 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) 4.2 m3 (5.49 yd3) 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 23 Standard Linkage Pin On Material Handling/ Standard 4.4 m3 (5.75 yd3) 4.6 m3 (6.2 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Material Handling/ Heavy Duty 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Hook On General Purpose 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Edition

48 Wheel Loaders Bucket Selection 966K 966K Material Density kg/m m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) General Purpose 4. m3 (5.23 yd3) 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) Pin On 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Standard Linkage Material Handling Rock Coal 4.2 m3 (5.49 yd3) 3.4 m3 (4.45 yd3) 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Fusion QC General Purpose 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Coal 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability Edition 44

49 Bucket Selection 966K Wheel Loaders 966K Material Density kg/m m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) General Purpose 4. m3 (5.23 yd3) 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) Pin On 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 23 High Lift Linkage Material Handling Rock Coal 4.2 m3 (5.49 yd3) 3.4 m3 (4.45 yd3) 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Fusion QC General Purpose 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Coal 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availabilit Edition

50 Wheel Loaders Bucket Selection 972M 972M Material Density kg/m m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) General Purpose 4.6 m3 (5.75 yd3) 4.8 m3 (6.28 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 5.52 m3 (7.22 yd3) 4.8 m3 (6.28 yd3) Standard Linkage Pin On Material Handling/ Standard 5. m3 (6.54 yd3) 4.8 m3 (6.28 yd3) 5. m3 (6.54 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) 5.52 m3 (7.22 yd3) 4.8 m3 (6.28 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) Material Handling/ Heavy Duty 5. m3 (6.54 yd3) 5.2 m3 (6.8 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) 5.98 m3 (7.82 yd3) 5.2 m3 (6.8 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability Edition 44

51 Bucket Selection 972K Wheel Loaders 972K Material Density kg/m m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 4.4 m3 (5.75 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) General Purpose 4.6 m3 (6.2 yd3) 4.8 m3 (6.28 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 5.52 m3 (7.22 yd3) 4.8 m3 (6.28 yd3) m3 (6.54 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) Pin On Material Handling 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Standard Linkage Rock Coal 3.6 m3 (4.71 yd3) 4. m3 (5.23 yd3) 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) 4.14 m3 (5.42 yd3) 3.42 m3 (4.47 yd3) 4.6 m3 (6.2 yd3) 3.8 m3 (4.97 yd3) 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 4.4 m3 (5.75 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) General Purpose 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Fusion QC 4.8 m3 (6.28 yd3) 5. m3 (6.54 yd3) 5.52 m3 (7.22 yd3) 4.8 m3 (6.28 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) Rock 3.6 m3 (4.71 yd3) 4.14 m3 (5.42 yd3) 3.42 m3 (4.47 yd3) Coal 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Edition

52 Wheel Loaders Bucket Selection 972K 972K Material Density kg/m m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 4.4 m3 (5.75 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) General Purpose 4.6 m3 (6.2 yd3) 4.8 m3 (6.28 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 5.52 m3 (7.22 yd3) 4.8 m3 (6.28 yd3) 5. m3 (6.54 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) Pin On Material Handling 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) High Lift Linkage Rock Coal 3.6 m3 (4.71 yd3) 4. m3 (5.23 yd3) 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) 4.14 m3 (5.42 yd3) 3.42 m3 (4.47 yd3) 4.6 m3 (6.2 yd3) 3.8 m3 (4.97 yd3) 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 4.4 m3 (5.75 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) General Purpose 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Fusion QC 4.8 m3 (6.28 yd3) 5.52 m3 (7.22 yd3) 4.8 m3 (6.28 yd3) 5. m3 (6.54 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) Rock 3.6 m3 (4.71 yd3) 4.14 m3 (5.42 yd3) 3.42 m3 (4.47 yd3) Coal 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% Material Density kg/m Extended Capacity Linkage Pin On Fusion QC General Purpose General Purpose 4.6 m3 (6.2 yd3) 4.9 m3 (6.41 yd3) 4.6 m3 (6.2 yd3) 4.9 m3 (6.41 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 5.64 m3 (7.38 yd3) 4.9 m3 (6.41 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 5.64 m3 (7.38 yd3) 4.9 m3 (6.41 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability Edition 44

53 Bucket Selection 98K Wheel Loaders 98K Material Density kg/m Standard Linkage Pin On General Purpose Rock Coal 5.4 m3 (7.6 yd3) 6.21 m3 (8.12 yd3) 5.4 m3 (7.6 yd3) 4.4 m3 (5.75 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) 8.2 m3 (1.73 yd3) 9.43 m3 (12.33 yd3) 8.2 m3 (1.73 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% Material Density kg/m High Lift Linkage Pin On General Purpose Rock Coal 5.4 m3 (7.6 yd3) 6.21 m3 (8.12 yd3) 5.4 m3 (7.6 yd3) 4.4 m3 (5.75 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) 8.2 m3 (1.73 yd3) 9.43 m3 (12.33 yd3) 8.2 m3 (1.73 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% Material Density kg/m Aggregate Package Linkage Pin On General Purpose Material Handling 5.7 m3 (7.46 yd3) 6. m3 (7.85 yd3) 5.7 m3 (7.46 yd3) 6.56 m3 (8.58 yd3) 5.7 m3 (7.46 yd3) 6.9 m3 (9.2 yd3) 6. m3 (7.85 yd3) 6.56 m3 (8.58 yd3) 5.7 m3 (7.46 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Edition

54 Wheel Loaders Bucket Selection 95 GC 95 GC Material Density kg/m m m3 3.1 m3 Standard Linkage General Purpose Pin On 3.3 m3 3.4 m3 3.6 m3 3.8 m3 3.3 m m3 3.4 m m3 3.6 m3 Hook On 3.1 m m3 3.1 m3 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges Edition 44

55 Bucket Selection 95H Wheel Loaders 95H Material Density kg/m m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) General Purpose 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Standard Linkage Pin On 3.4 m3 (4.45 yd3) 3.2 m3 (4.19 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.68 m3 (4.81 yd3) 3.2 m3 (4.19 yd3) 23 Material Handling 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) General Purpose 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) High LIft Linkage Pin On 3.4 m3 (4.45 yd3) 3.2 m3 (4.19 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.68 m3 (4.81 yd3) 3.2 m3 (4.19 yd3) Material Handling 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Material Density Bucket Fill Factors 115% 11% 15% 1% 95% lb/yd3 1,18 1,348 1,517 1,685 1,854 2,22 2,191 2,359 2,528 2,696 2,865 3,33 3,22 3,37 3,539 3,77 3,876 4,44 4,213 NOTE: All buckets are showing Bolt-On Edges. Edition

56 Wheel Loaders Bucket Selection 962H 962H Material Density kg/m m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) Standard Linkage Pin On 3.6 m3 (4.71 yd3) 3.4 m3 (4.45 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) Material Handling 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) High LIft Linkage Pin On 3.6 m3 (4.71 yd3) 3.4 m3 (4.45 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) Material Handling 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Material Density Bucket Fill Factors 115% 11% 15% 1% 95% lb/yd3 1,18 1,348 1,517 1,685 1,854 2,22 2,191 2,359 2,528 2,696 2,865 3,33 3,22 3,37 3,539 3,77 3,876 4,44 4,213 NOTE: All buckets are showing Bolt-On Edges Edition 44

57 Bucket Selection 966H Wheel Loaders 966H Material Density kg/m m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Standard Linkage Pin On General Purpose Rock 4. m3 (5.23 yd3) 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 3.4 m3 (4.45 yd3) 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 23 Material Handling/ Standard 4. m3 (5.23 yd3) 4.6 m3 (6.2 yd3) 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Edition

58 Wheel Loaders Bucket Selection 972H 972H Material Density kg/m General Purpose 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Standard Linkage Pin On Material Handling Rock 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) Material Handling/ Standard 4.6 m3 (6.2 yd3) 5. m3 (6.54 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges Edition 44

59 Bucket Selection 98H Wheel Loaders 98H Material Density kg/m m3 (5.7 yd3) 6.21 m3 (8.12 yd3) 5.4 m3 (5.7 yd3) General Purpose 5.7 m3 (7.46 yd3) 6.56 m3 (8.58 yd3) 5.7 m3 (7.46 yd3) Standard Linkage Pin On Material Handling Rock 6. m3 (7.85 yd3) 5.7 m3 (7.46 yd3) 4.4 m3 (5.75 yd3) 6.9 m3 (9.2 yd3) 6. m3 (7.85 yd3) 6.56 m3 (8.58 yd3) 5.7 m3 (7.46 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) 23 Coal 8.2 m3 (1.73 yd3) 9.43 m3 (12.33 yd3) 8.2 m3 (1.73 yd3) General Purpose/ Heavy Duty 5.7 m3 (7.46 yd3) 6.56 m3 (8.58 yd3) 5.7 m3 (7.46 yd3) Material Density lb/yd Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Edition

60 Wheel Loaders Bucket Selection 986H 986H Standard Lift Material Density Bucket Volume kg/m 3 tonnes/m 3 lb/yd 3 tons/yd 3 m 3 yd *Density range covers 1% rated payload to 11% rated payload in accordance with Large Wheel Loader payload policy Edition 44

61 Bucket Selection 988K, 99H Wheel Loaders 988K Material Density Bucket Volume kg/m 3 tonnes/m 3 lb/yd 3 tons/yd 3 m 3 yd H Material Density Bucket Volume kg/m 3 tonnes/m 3 lb/yd 3 tons/yd 3 m 3 yd Edition

62 Wheel Loaders Bucket Selection 992K 993K 992K Standard Bucket Volume Up to specified density for 1% fill factor Material Density m 3 yd 3 kg/m 3 lb/yd K High Lift Bucket Volume Up to specified density for 1% fill factor Material Density m 3 yd 3 kg/m 3 lb/yd K Standard Bucket Volume Up to specified density for 1% fill factor Material Density m 3 yd 3 kg/m 3 lb/yd K High Lift Bucket Volume Up to specified density for 1% fill factor Material Density m 3 yd 3 kg/m 3 lb/yd Edition 44

63 Bucket Selection 994H Wheel Loaders m 3 yd 3 994H Rated Payload kg (76, lb) BUCKET CAPACITY kg/m MATERIAL DENSITY (THOUSANDS) lb/yd 3 m 3 yd 3 994H High, Extended High Lifts Rated Payload 3 84 kg (68, lb) BUCKET CAPACITY kg/m MATERIAL DENSITY (THOUSANDS) lb/yd 3 % = Bucket Fill Factor 11% 1% 95% Standard Edition

64 Wheel Loaders Bucket Selection IT14G2 BUCKET CAPACITY m 3 (yd 3 ) 3.3 (4.25) BUCKET SELECTION BASED ON MATERIAL DENSITY 3.1 (4.) 2.5 (3.25) 2. (2.6) 1.8 (2.4) 1.6 (2.) 1.4 (1.8) 1.3 (1.7) 1.2 (1.6) A 1. (1.31) lb/yd kg/m 3 MATERIAL DENSITY NOTE: Machines equipped same as those on Performance Data pages. KEY A IT14G Edition 44

65 Travel Time Loaded 93K 2.5R-25 Tires Wheel Loaders 93K TRAVEL TIME LOADED TIME (MIN) PERCENT GRADE 23 DISTANCE ONE WAY Meters Travel time assumes maximum governor pedal depression and automatic shifting in Range 4. In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. TIME (MIN) PERCENT GRADE DISTANCE ONE WAY Meters Edition

66 Wheel Loaders Travel Time Empty 93K 2.5R-25 Tires 93K TRAVEL TIME EMPTY TIME (MIN) PERCENT GRADE DISTANCE ONE WAY Meters Travel time assumes maximum governor pedal depression and automatic shifting in Range 4. In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. TIME (MIN) PERCENT GRADE DISTANCE ONE WAY Meters Edition 44

67 Travel Time Loaded 938K 2.5R-25 Tires Wheel Loaders 938K TRAVEL TIME LOADED TIME (MIN) PERCENT GRADE 23 DISTANCE ONE WAY Meters Travel time assumes maximum governor pedal depression and automatic shifting in Range 4. In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. TIME (MIN) PERCENT GRADE DISTANCE ONE WAY Meters Edition

68 Wheel Loaders Travel Time Empty 938K 2.5R-25 Tires 938K TRAVEL TIME EMPTY TIME (MIN) PERCENT GRADE DISTANCE ONE WAY Meters Travel time assumes maximum governor pedal depression and automatic shifting in Range 4. In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. TIME (MIN) PERCENT GRADE DISTANCE ONE WAY Meters Edition 44

69 Travel Time Loaded 95K 95H 23.5-R25 Tires Wheel Loaders K TRAVEL TIME LOADED 2% 2 TIME (MIN) % 1% 8% 6% 4% PERCENT GRADE % Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 3 95H TRAVEL TIME LOADED 2.5 2% TIME (MIN) % 1% 8% 6% 4% PERCENT GRADE.5 2% DISTANCE ONE WAY Meters Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition

70 Wheel Loaders Travel Time Empty 95K 95H 23.5-R25 Tires 2 95K TRAVEL TIME EMPTY TIME (MIN) % 15% 1% 8% 6% 4% 2% PERCENT GRADE DISTANCE ONE WAY Meters These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 2 95H TRAVEL TIME EMPTY 2% % TIME (MIN) 1.5 1% 8% 6% 4% 2% PERCENT GRADE DISTANCE ONE WAY Not available in all regions. Contact your local Cat dealer for product availability. Meters Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations Edition 44

71 Travel Time Loaded 962K 962H 23.5-R25 Tires Wheel Loaders K TRAVEL TIME LOADED 2% 2 TIME (MIN) % 1% 8% 6% 4% PERCENT GRADE % Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability H TRAVEL TIME LOADED 2.5 2% TIME (MIN) % 1% 8% 6% 4% PERCENT GRADE.5 2% Meters DISTANCE ONE WAY Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition

72 Wheel Loaders Travel Time Empty 962K 962H 23.5-R25 Tires 2 962K TRAVEL TIME EMPTY TIME (MIN) % 15% 1% 8% 6% 4% 2% PERCENT GRADE DISTANCE ONE WAY Meters These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability H TRAVEL TIME EMPTY 2% TIME (MIN) % 1% 8% 6% 4% 2% PERCENT GRADE DISTANCE ONE WAY Not available in all regions. Contact your local Cat dealer for product availability. Meters Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations Edition 44

73 Travel Time Loaded and Empty 966M 26.5-R25 Tires Wheel Loaders 2 966M TRAVEL TIME LOADED 1.5 2% TIME (MIN) % 1% 8% 6% 4% 2% PERCENT GRADE DISTANCE ONE WAY 966M TRAVEL TIME EMPTY Meters 2% TIME (MIN) % 1% 8% 6% 4% 2% PERCENT GRADE DISTANCE ONE WAY Meters These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition

74 Wheel Loaders Travel Time Loaded 966K 966H 26.5-R25 Tires K TRAVEL TIME LOADED 2% 2 15% TIME (MIN) % 8% 6% 4% PERCENT GRADE.5 2% Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability H TRAVEL TIME LOADED 2% 2 15% TIME (MIN) % 8% 6% 4% PERCENT GRADE.5 2% Meters DISTANCE ONE WAY Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations Edition 44

75 Travel Time Empty 966K 966H 26.5-R25 Tires Wheel Loaders 2 966K TRAVEL TIME EMPTY 2% % TIME (MIN) 1 1% 8% 6% PERCENT GRADE % 2% Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability H TRAVEL TIME EMPTY 2% % TIME (MIN) 1 1% 8% 6% PERCENT GRADE.5 4% 2% DISTANCE ONE WAY Meters Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition

76 Wheel Loaders Travel Time Loaded and Empty 972M 26.5-R25 Tires 2 972M TRAVEL TIME LOADED TIME (MIN) % 15% 1% 8% 6% 4% 2% PERCENT GRADE DISTANCE ONE WAY Meters M TRAVEL TIME EMPTY 2% TIME (MIN) % 8% 1% 6% 4% 2% PERCENT GRADE DISTANCE ONE WAY Meters Edition 44 These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.

77 Travel Time Loaded 972K 972H 26.5-R25 Tires Wheel Loaders K TRAVEL TIME LOADED 2% 2 15% TIME (MIN) % 8% 6% 4% PERCENT GRADE % Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability H TRAVEL TIME LOADED 2% 2 15% TIME (MIN) % 8% 6% 4% PERCENT GRADE.5 2% Meters DISTANCE ONE WAY Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition

78 Wheel Loaders Travel Time Empty 972K 972H 26.5-R25 Tires 2 972K TRAVEL TIME EMPTY 2% % TIME (MIN) 1 1% 8% 6% PERCENT GRADE.5 4% 2% Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability H TRAVEL TIME EMPTY 2% % TIME (MIN) 1 1% 8% 6% PERCENT GRADE.5 4% 2% DISTANCE ONE WAY Meters Edition 44 Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.

79 Travel Time Loaded 98K 98H 29.5-R25 Tires Wheel Loaders K (NO LOCK-UP) TRAVEL TIME LOADED 2% 2 15% TIME (MIN) % 8% 6% 4% PERCENT GRADE % Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability H TRAVEL TIME LOADED 2% 2 15% TIME (MIN) % 8% 6% 4% PERCENT GRADE.5 2% DISTANCE ONE WAY Meters Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition

80 Wheel Loaders Travel Time Empty 98K 98H 29.5-R25 Tires 2 98K (NO LOCK-UP) TRAVEL TIME EMPTY 2% % TIME (MIN) 1.5 1% 8% 6% 4% 2% PERCENT GRADE Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 2 98H TRAVEL TIME EMPTY 2% % TIME (MIN) 1.5 1% 8% 6% 4% 2% PERCENT GRADE Meters DISTANCE ONE WAY Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations Edition 44

81 Travel Time Lock-Up Clutch 98K 29.5-R25 Tires Wheel Loaders 2 98K (LOCK-UP CLUTCH) TRAVEL TIME LOADED 2% % TIME (MIN) 1.5 1% 8% 6% 4% 2% PERCENT GRADE Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability K (LOCK-UP CLUTCH) TRAVEL TIME EMPTY 2% TIME (MIN) % 1% 8% 6% 4% 2% PERCENT GRADE Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition

82 Wheel Loaders 988K Rimpull-Speed-Gradeability Lock-Up Clutch kn 988K 35 1F 3 25 RIMPULL 2 2F 15 2F 1 5 3F 3F 4F 4F km/h GROUND SPEED Direct Drive Edition 44

83 Travel Time Loaded 988K Lock-Up Clutch 35/65-33 Tires Wheel Loaders Feet 7 6 Meters K TRAVEL TIME LOADED 2% 4% 6% 8% 1% 15% 2% DISTANCE TOTAL RESISTANCE (Grade plus Rolling) Minutes TIME NOTE: Curves assume use of highest operating speed attainable: 4th gear for 2%-6% TR, 3rd gear for 8%-1% TR, 2nd gear for 15% and 2% TR. In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. Edition

84 Wheel Loaders Travel Time Empty 988K Lock-Up Clutch 35/65-33 Tires DISTANCE Feet K TRAVEL TIME EMPTY Meters 2% 4% 6% 8% 1% 15% 2% Minutes TIME TOTAL RESISTANCE (Grade plus Rolling) NOTE: Curves assume use of highest operating speed attainable: 4th gear for 2%-8% TR, 3rd gear for 1%-15% TR, 2nd gear for 2% TR. In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations Edition 44

85 99H Rimpull-Speed-Gradeability Wheel Loaders kg x 1 6 lb x H E L RIMPULL TOTAL RESISTANCE (Grade plus Rolling) L L mph km/h SPEED KEY 1 1st Gear 2 2nd Gear 3 3rd Gear KEY E Empty kg (169,677 lb) L Loaded kg (22,677 lb) Calculated Pull: Idle Hydraulics Curves Assume NO SLIP Conditions Edition

86 Wheel Loaders Travel Time Loaded 99H 41.25/7-39 Tires DISTANCE ONE WAY Feet H TRAVEL TIME LOADED Meters 2% 4% 6% 8% 1% % % Minutes TIME TOTAL RESISTANCE (Grade plus Rolling) DISTANCE ONE WAY Feet Meters % 4% 6% 8% 1% % 2% TOTAL RESISTANCE (Grade plus Rolling) Minutes TIME NOTE: Curves assume use of highest operating speed attainable: 3rd gear for 2%-8% TR, 2nd gear for 1%-2% TR. In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations Edition 44

87 Travel Time Empty 99H 41.25/7-39 Tires Wheel Loaders 99H TRAVEL TIME EMPTY Feet 7 Meters % 4% 6% 8% 1% 15% DISTANCE ONE WAY % TOTAL RESISTANCE (Grade plus Rolling) Minutes TIME DISTANCE ONE WAY Feet Meters % 4% 6% 8% 1% 15% % TOTAL RESISTANCE (Grade plus Rolling) Minutes TIME NOTE: Curves assume use of highest operating speed attainable: 3rd gear for 2%-1% TR, 2nd gear for 15% and 2% TR. In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. Edition

88 Wheel Loaders 992K Rimpull-Speed-Gradeability Standard Machine kg x 1 65 lb x K 6 6 E L RIMPULL TOTAL RESISTANCE % (Grade plus Rolling) mph SPEED km/h KEY 1 1st Gear 2 2nd Gear 3 3rd Gear KEY E Empty kg (24,58 lb) L Loaded kg (252,58 lb) Calculated Pull: Idle Hydraulics Curves Assume NO SLIP Conditions Edition 44

89 992K Rimpull-Speed-Gradeability Lock-Up Clutch Wheel Loaders lb 992K 23 RIMPULL TOTAL RESISTANCE % (Grade plus Rolling) SPEED mph KEY 1 1st Gear 2 2nd Gear 3 3rd Gear KEY E Empty kg (24,58 lb) L Loaded kg (252,58 lb) Calculated Pull: Idle Hydraulics Curves Assume NO SLIP Conditions Edition

90 Wheel Loaders Travel Time Loaded 992K 45/65-45 Tires DISTANCE ONE WAY Feet Meters K TRAVEL TIME LOADED 2% 4% 6% 8% 1% TIME 15% 2% TOTAL RESISTANCE (Grade plus Rolling) Minutes DISTANCE ONE WAY Feet Meters % 4% 6% 8% 1% % 2% TOTAL RESISTANCE (Grade plus Rolling) Minutes TIME NOTE: Curves assume use of highest operating speed attainable: 3rd gear for 2%-1% TR, 2nd gear for 15% and 2% TR. In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations Edition 44

91 Travel Time Empty 992K 45/65-45 Tires Wheel Loaders 992K TRAVEL TIME EMPTY Feet 7 6 Meters % 4% 6% 8% 1% 15% 2% DISTANCE ONE WAY TOTAL RESISTANCE (Grade plus Rolling) Minutes TIME DISTANCE ONE WAY Feet Meters % 4% 6% 8% 1% 15% 2% TOTAL RESISTANCE (Grade plus Rolling) Minutes TIME NOTE: Curves assume use of highest operating speed attainable: 3rd gear for 2%-1% TR, 2nd gear for 15% and 2% TR. In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. Edition

92 Wheel Loaders 993K Rimpull-Speed-Gradeability Lock-Up Clutch kg x 1 E 993K L RIMPULL TOTAL RESISTANCE % (Grade plus Rolling) SPEED km/h KEY 1 1st Gear 2 2nd Gear 3 3rd Gear KEY E Empty L Loaded Calculated Pull: Idle Hydraulics Curves Assume NO SLIP Conditions Edition 44

93 993K Rimpull-Speed-Gradeability Lock-Up Clutch Wheel Loaders lb x 1 E 993K L RIMPULL TOTAL RESISTANCE % (Grade plus Rolling) 23 SPEED mph KEY 1 1st Gear 2 2nd Gear 3 3rd Gear KEY E Empty L Loaded Calculated Pull: Idle Hydraulics Curves Assume NO SLIP Conditions Edition