Flat Suction Pads (Oval)
|
|
|
- Letitia Thomas
- 6 years ago
- Views:
Transcription
1 Flat (Oval) Flat SGON Suitability for Industry-Specific Applications Applications Oval and flat suction pad for handling of narrow workpieces, including curved objects, such as sections, pipes, packaging materials Handling of frame elements, such as doors and windows Considerably higher suction force than round, flat suction pads when handling narrow workpieces Flat suction pads SGON Design Robust, wear-resistant suction pad SGON with single sealing lip, consisting of suction pad SGO and connection nipple Nipple plugged into pad Pads of the size 24x8 mm and larger are additionally secured with a two-ear clamp to prevent rotation System design flat suction pads SGON Flat suction pads SGON being used for handling blister packaging Our Highlights... Oval, flat suction pad Pads of the size 24x8 mm and larger additionally secured with a two-ear clamp Optimum shape Supports on the bottom Your Benefits... > For long (sections, pipes) or flat workpieces with bars > Protection against unwanted rotation during use > High suction force in spite of small dimensions > No permanent deformation of thin-walled workpieces Contact Services Gripping 101
2 Flat (Oval) Flat SGON Designation Code Flat SGON Abbreviated designation Suction area LxW in mm Material and Shore hardness Example SGON 30x10 SI-60 G1/8-IG: SGON 30x10 SI-60 G1/8-IG SGON 4x2 to 90x30 HT1-60 NBR-60 NBR-70 NBR-AS-60 (antistatic) SI-60 SI-70 Connection thread M3-AG (AG = male (M)) M5-AG M5-IG (IG = female (F)) G1/8-AG G1/8-IG G1/4-AG G1/4-IG Ordering Data Flat SGON Suction pad SGON (elastomer part + connection nipple) is delivered unassembled. The delivery consists of: Suction pad of type SGO elastomer part, available in various dimensions (LxW) and materials Connection nipple of type SA-NIP available with various threads Pads of the size 24 x 8 mm and larger are delivered with a two-ear clamp Available spare parts: suction pad SGO, connection nipple SA-NIP, two-ear clamp Contact Services Gripping Flat SGON Suction pad material * / hardness in Shore A High temp material Perbunan NBR Perbunan NBR Perbunan NBR-an- Silicone SI Silicone SI HT1 60±5ShA 60±5ShA 70±5ShA tistat. 60±5ShA 60±5ShA 70±5ShA SGON 4x2 AG SGON 7x3.5 AG SGON 12x4 AG SGON 15x5 AG SGON 15x5 IG SGON 18x6 AG SGON 18x6 IG SGON 24x8 AG SGON 24x8 IG SGON 30x10 AG SGON 30x10 IG SGON 45x15 AG SGON 45x15 IG SGON 60x20 AG SGON 60x20 IG SGON 75x25 AG SGON 75x25 IG SGON 90x30 AG SGON 90x30 IG *Additional material specifications at beginning of the section " " 102
3 Flat (Oval) Flat SGON Ordering Data Spare Parts Suction pad material * / hardness in Shore A High temp material Perbunan NBR Perbunan NBR Perbunan NBR-antistat. Silicone SI 60±5ShA Silicone SI 70±5ShA HT1 60±5ShA 60±5ShA 70±5ShA 60±5ShA SGO 4x SGO 7x SGO 12x SGO 15x SGO 18x SGO 24x SGO 30x SGO 45x SGO 60x SGO 75x SGO 90x *Additional material specifications at beginning of the section " " Ordering Data Spare Parts Suction Pad Nipples Suction pad nipples [AG] Suction pad nipples [IG] two-ear clamp* SGON 4x2 M3 SA-NIP N003 M3-AG SGON 7x3.5 M3 SA-NIP N003 M3-AG SGON 12x4 M5 SA-NIP N020 M5-AG SGON 15x5 M5 SA-NIP N021 M5-AG SA-NIP N021 M5-IG SGON 18x6 M5 SA-NIP N021 M5-AG SA-NIP N021 M5-IG SGON 24x8 G1/8 SA-NIP N022 G1/8-AG SA-NIP N022 G1/8-IG ZOKL SGON 30x10 G1/8 SA-NIP N022 G1/8-AG SA-NIP N022 G1/8-IG ZOKL SGON 45x15 G1/4 SA-NIP N023 G1/4-AG SA-NIP N023 G1/4-IG ZOKL SGON 60x20 G1/4 SA-NIP N023 G1/4-AG SA-NIP N023 G1/4-IG ZOKL SGON 75x25 G1/4 SA-NIP N023 G1/4-AG SA-NIP N023 G1/4-IG ZOKL SGON 90x30 G1/4 SA-NIP N023 G1/4-AG SA-NIP N023 G1/4-IG ZOKL *In the case of replacement pad SGO, the two-ear terminal is included Technical Data Flat SGON Suction force [N]* Volume [cm³] Min. curve radius Recom. internal hose Nipple family [mm] (convex) diameter d [mm]** SGON 4x N 003 SGON 7x N 003 SGON 12x N 020 SGON 15x N 021 SGON 18x N 021 SGON 24x N 022 SGON 30x N 022 SGON 45x N 023 SGON 60x N 023 SGON 75x N 023 SGON 90x N 023 *The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a smooth, dry workpiece surface - they do not include a safety factor **The recommended hose diameter refers to a hose length of approx. 2 m Contact Services Gripping 103
4 Flat (Oval) Flat SGON Design Data Flat SGON Contact Services Gripping SGON 4x2 to 90x30 AG SGON 15x5 to 90x30 IG Dimensions in mm* B dn G1 H L LG1 SW1 Z (Stroke) SGON 4x2 AG M3-M SGON 7x3.5 AG M3-M SGON 12x4 AG M5-M SGON 15x5 AG M5-M SGON 15x5 IG M5-F SGON 18x6 AG M5-M SGON 18x6 IG M5-F SGON 24x8 AG G1/8"-M SGON 24x8 IG G1/8"-F SGON 30x10 AG G1/8"-M SGON 30x10 IG G1/8"-F SGON 45x15 AG G1/4"-M SGON 45x15 IG G1/4"-F SGON 60x20 AG G1/4"-M SGON 60x20 IG G1/4"-F SGON 75x25 AG G1/4"-M SGON 75x25 IG G1/4"-F SGON 90x30 AG G1/4"-M SGON 90x30 IG G1/4"-F *Acceptable dimensional tolerances for rubber parts concerning to DIN ISO M
5 Flat (Oval) Flat SGON Design Data Flat SGO - Spare Parts for SGON Contact Services Gripping SGO 4x2 to 90x30 Dimensions in mm* B d d1 d2 Dk H H2 H3 H4 L Z (Stroke) SGO 4x SGO 7x SGO 12x SGO 15x SGO 18x SGO 24x SGO 30x SGO 45x SGO 60x SGO 75x SGO 90x *Acceptable dimensional tolerances for rubber parts concerning to DIN ISO M
6 Flat (Oval) Suction area (LxW) from 60 x 20 mm to 370 x 80 mm Suitability for Industry-Specific Applications Applications Oval suction plate for handling of long, narrow workpieces such as sections or door and window frames With long, narrow workpieces considerably higher suction force than with round, flat suction pads SPLO 100x32-TV and SPLO 300x100-TV available with sensing valve to detect presence of workpieces SPLO 100x30 to SPLO 300x100 with long sealing lip for handling very curved workpieces Suction plates SPLO Design Robust and wear-resistant suction plate with single sealing lip Sealing lip vulcanized to support plate SPLO 100x32-TV and SPLO 300x100-TV with sensing valve Sealing lip made of NBR for minimum marking of workpieces Suction plates SPLO mounted on a manually guided vacuum lifting device Contact Services Gripping Suction plates SPLO being used for handling wooden doors Our Highlights... Oval, flat suction plate Support plate made of steel/ aluminum with sealing lip vulcanized to it Sealing lip made of NBR Various sizes and shapes Supports on the bottom Your Benefits... > Handling of long, narrow workpieces, also curved workpieces (such as sections) > Capable of handling heavy loads; flexible mounting facilities > Little marking, even of sensitive surfaces > Wide range of pads for many different workpieces > No permanent deformation of thin-walled workpieces 106
7 Flat (Oval) Suction area (LxW) from 60 x 20 mm to 370 x 80 mm Designation Code Abbreviated designation Suction area LxW in mm Material and Shore hardness Connection thread Example SPLO 60x20 NBR-55 G1/8-IG: SPLO 60x20 NBR-55 G1/8-IG SPLO 60x20 to 370x80 NBR-50 NBR-55 G1/8-IG (IG = female (F)) G1/4-IG Product addition TV sensing valve Ordering Data Suction plate SPLO, available in various diameters and optional with sensing valve, is delivered with support plate vulcanized to elastomer part. * Part Number SPLO 60x20 NBR-55 G1/8-IG SPLO 100x32 NBR-50 G1/4-IG SPLO 100x32 NBR-50 TV SPLO 100x30 NBR SPLO 200x30 NBR SPLO 300x30 NBR SPLO 150x55 NBR SPLO 200x55 NBR SPLO 250x55 NBR SPLO 300x55 NBR SPLO 300x100 NBR SPLO 300x100 NBR-50 TV SPLO 370x80 NBR *Additional material specifications at beginning of the section " " Technical Data Suction force [N]* Volume [cm³] Min. curve radius [mm] (convex) SPLO 60x20 NBR-55 G1/8-IG SPLO 100x32 NBR-50 G1/4-IG SPLO 100x32 NBR-50 TV SPLO 100x30 NBR SPLO 200x30 NBR SPLO 300x30 NBR SPLO 150x55 NBR SPLO 200x55 NBR SPLO 250x55 NBR SPLO 300x55 NBR SPLO 300x100 NBR SPLO 300x100 NBR-50 TV SPLO 370x80 NBR *The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a smooth, dry workpiece surface - they do not include a safety factor Contact Services Gripping 107
8 Flat (Oval) Suction area (LxW) from 60 x 20 mm to 370 x 80 mm Design Data SPLO 60x20 to 100x32 SPLO 100x32 TV SPLO 100x30, 200x30 and 300x30 SPLO 150x55, 200x55, 250x55, 300x55 and 370x80 Contact Services Gripping SPLO 300x100 TV SPLO 300x
9 Flat (Oval) Suction area (LxW) from 60 x 20 mm to 370 x 80 mm Design Data Dimensions in mm* B B1 d3 G1 G2 G3 H H1 H2 L L1 L2 LG1 LG2 LG3 X1 Y1 Z SPLO 60x20 NBR-55 G1/8-IG G1/8"-F SPLO 100x32 NBR-50 G1/4-IG G1/4"-F SPLO 100x32 NBR-50 TV G1/4"-M G1/8"-F SPLO 100x30 NBR SPLO 200x30 NBR SPLO 300x30 NBR SPLO 150x55 NBR SPLO 200x55 NBR SPLO 250x55 NBR SPLO 300x55 NBR SPLO 300x100 NBR SPLO 300x100 NBR-50 TV G1/4"-M G1/8"-F M6-F SPLO 370x80 NBR *Acceptable dimensional tolerances for rubber parts concerning to DIN ISO M3 Contact Services Gripping 109
Suction Pads for Plastic Films and Paper
for Plastic Films and Paper Flat SGN 25 K to SGN 40 K Suction area (Ø) from 25 mm to 40 mm Suitability for Industry-Specific Applications Applications Round, flat suction pad for handling of paper, plastic
Vacuum Pumps. Oil-Lubricated Vacuum Pumps EVE-OG. Suction rate from 10 m³/h to 255 m³/h. Suitability for Industry-Specific Applications Schmalz -
Oil-Lubricated EVE-OG Suitability for Industry-Specific Applications Applications pump for universal use in a wide range of different applications in the sector of manual and automatic handling Handling
SP30 - BJ - FCF50 - PU
SMART Plungers SP-FCF Series Features Always return back to original position (wide angle 42 ) No need tool for pad replacement Less friction for Level compensator Light weight and long life time Compact
Vacuum Components SHREE VYANKATESHWARA E N T E R P R I S E S
CKD Actuators Pneumatic Valves Pneumatic Auxiliary Components Pneumatic Auxiliary Components (Main Line Unit) Pneumatic Filter, Regulator, Lubricator (F.R.L. Unit) Related Pneumatic Products DD Actuator
Design Our Highlights... Your Benefits... Example EVE-TR 40 AC3 F: EVE TR 10 AC3 F EVE TR dry-running 2.3 TR-M diaphragm pump to
Pumps Dry-Running Pumps EVE-TR Suitable for Industry Specific Applications Applications pump for making the vacuum available in universal use in a wide range of different applications in the sector of
Needle Grippers. Needle Grippers SNG-AP
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com Gripping SNG-AP Needle stroke max. 3 mm to max. 20 mm (variable) Needle grippers
Standard suction cups
BLOCK CYLINDER Double acting V E R I N S HYDRAULIQUE Standard suction cups AND Inserts for standard suction cups VCN SERIE ISO seals Maximum working pressure: 500 bar Bore: Ø 25 to Ø 125 mm 1 Selecting
A type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...
ASEPTIC-0-RING UNIONS Female Union... 68 Union Nut... 69 Male Union... 70 O-Ring... 71 Reduced Female Union... 72 Reduced Male Union... 73 Female Cap... 74 Male Cap... 75 Female Union Female Union Surface
Wafer Grippers. Wafer Grippers SWGm. Two suction areas suitable for wafer sizes 125 x 125 mm and 156 x 156 mm
Wafer Suitability for Industry-Specific Applications Applications Wafer gripper for extremely fast and gentle handling of wafers and solar cells in the production processes Loading and unloading from stacks
Multi-Stage Ejectors. Multi-Stage Ejectors SEM. Suction rate from 332 l/min to 2,370 l/min. Suitability for Industry-Specific Applications
Multi-Stage Ejectors Suction rate from 332 l/min to 2,370 l/min Suitability for Industry-Specific Applications Applications Multi-stage ejector for handling of cardboard, packing materials, insulating
Suction cups VAS/VASB
s VAS/VASB q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
KFE Ball Valves The Benchmark for Quality and Reliability
Simplex KFE Ball Valves CLIMATE CONTROL SYSTEMS KFE Ball Valves The Benchmark for Quality and Reliability I For heating, domestic water and solar I Ease of installation due to proven design I Convenient
MW50 HYDRAULIC MOTORS
MW50 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G CHARACTERISTICS Motor inertia 1 kg.m² H D S M W 5 0 1 2 3 4 1 2 3 4 1 2 3 3 4 1 2 3 4 5 cm³/tr [cu.in/rev.] Theoretical torque at 100 bar at 1000 SI
Clean Line Stainless steel
www.puzzleadvance.com Clean Line Stainless steel operating parts lock systems hinges profile rubber linear systems anti-fadigue mats clamping technology standard elements operating magnets Clean Line With
METAL IMPREGNATED SILICONE
VACUUM CUPS VACUUM CUP MATERIALS There are various reasons for choosing a particular vacuum cup material. The first choice is normally the hardness. This will determine the ability of a vacuum cup to seal
GSW-V. Application example. Special Gripper Vacuum Gripper. Weight 0.12 kg 0.39 kg. Clamping diameter 20 mm 32 mm
GSW-V Suction pad diameter 30 mm 125 mm Clamping diameter 20 mm 32 mm Weight 0.12 kg 0.39 kg Gripping force 55 N 980 N Workpiece weight 0.28 kg 4.9 kg Application example Handling of gears in a milling
41 E SCALING HAMMER 77 ST SCALING HAMMER YOUR ADVANTAGE: FUNCTION. Recoilless hammers. Acc. to DIN 5133 With steel tube handle
514 515 77 ST SCALING HAMMER Acc. to DIN 5133 With steel tube handle 41 E SCALING HAMMER DIN 5111 Spare handle E 4 E g Z 0 Code No. 400 0.505 8691390 77 ST-400 g Z 500 320 0.640 8665390 41 E-500 320 0.160
Buffer elements 1109
Buffer elements 1109 Technical information for rubber-metal buffers Our rubber-metal buffers are simple and cost-efficient standard units for elastic mounting. They are ideally suited for compressive and
Parallel Gripper Series CGB
Parallel Gripper Series CGB Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The guided parallel gripper mod. CGB is available in 4 different sizes and is equipped with a guide mechanism that offers
Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
MI250 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G
MI250 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G Hydraulic motors MI250 OCLAIN HYDRAULICS CHARACTERISTICS Theoretical torque Max.power Max.speed ressure max. at 100 bar at 1000 SI cm³/tr [cu.in/rev.]
CONNECTION INTO INTERNAL THREADED AND SHAPED ELEMENTS
CONNECTION INTO INTERNAL THREADED AND SHAPED ELEMENTS Series IG (manual version) - Quick connector for female threads and shaped elements - Working pressure: from 0 up to 350 bar IG-18-14 66 30 19 1/4"G
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
Feed Pumps VP / VPB / VPBM
Feed Pumps VP / VPB / VPBM Symbol General The feed pumps from the VP series are low-noise, single-stroke vane pumps with constant flow rate. Using a damped bell housing (PT) enables noise levels to be
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" to 8" ) ISO PN50 ANSI 300 R.F. - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire safe BS 6755-2
EUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim. Pump unit GMZ-E
Pump unit GMZ-E Pump used to supply oil and grease from a barrel directly through a lid-hole or a bunghole. Technical data: Pump with bung-hole Pump with barrel lid Delivery volume per stroke: Pump element
Reliable - Safe - Proven!
SIKA Flow Switches SIKA Flow Switches Reliable - Safe - Proven! Our tried-and-tested flow monitoring switches are used for two basic purposes: To ensure a minimum flow rate, e.g. of cooling water or lubricating
Air operated Pinch Valves
Air operated Pinch Valves Connection options: Flange Connection Internal Thread Connection Tri-Clamp Weld-on ends Threaded spigot (RJT Connection) Semi-Silo Trailer Connection Threaded hose nozzles AKO
PWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
GN 23. Stainless Steel-Levelling feet
GN 23 Stainless Steel-Levelling feet technical informations Specification Type (Base plate) - Type D0: fine turned, without rubber underlay - Type D1: fine turned, with rubber underlay, inlaid, black Version
P.T.F.E. WEDGE SEALS. Vulcan P.T.F.E Wedge Type Seals
P.T.F.E. WEDGE SEALS Vulcan P.T.F.E Wedge Type Seals P.T.F.E. WEDGE SEALS Introduction Vulcan s extensive 16XX range of Multi-Sprung Seals are commonly specified for arduous applications, such as corrosive
Suction Filter SF/SFM/SFF and Suction Filter Elements S/S..
Suction Filter /M/F and Suction Filter Elements S/S.. up to 500 l/min Filters: 60 110 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The
HIGH PRESSURE - pumps
Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group
Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements
Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant
20 DREXEL DRIVE, BAY SHORE, NY 11706, USA Phone: (631) / Fax: (631)
20 DREXEL DRIVE, BAY SHORE, NY 11706, USA Phone: (631) 273 4940 / Fax: (631) 273 5018 Email: gnyequip@gnyequipment.com www.gnyequipment.com 3/16 uncoated Stainless Steel (Grounded to Arm) ..up to 36 GNY
Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Flanges R.F. Class 300 (PN50) - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire
Table of contents gripper electrical
Gripper electrical Table of contents gripper electrical Order no. Stroke per Gripping force Gripping force Page jaw [mm] in opening [N] in clothing [N] Product Information GEP1402 2 140 14 10 GEP1406C
SOLAR AEROLINE. fast simple reliable. The perfect connection technology for solar hot water
SOLAR The perfect connection technology for solar hot water Pipe systems for solar, heating, heat pumps and air-conditioning technology fast simple reliable Assembly options Applications: On-roof, in-roof
VACUUM CUPS 2 SECTION 2 VACUUM CUPS 2: EDCO USA.
VACUUM S SECTION VACUUM S 01 EDCO USA. www.edcousa.net :1 VACUUM S CONTENTS BELLOWS S (B) DOUBLE BELLOWS S (B) BELLOWS TRACTION FOOT S (BF) MULTI-BELLOWS S (BL) DEEP S (D) FLAT S (F) FLAT CONCAVE S (FC)
TURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
VERTICAL MULTISTAGE PUMPS SSV-F Hz
VERTICAL MULTISTAGE PUMPS SSV-F 1-3 - 6-1 - 15 5Hz TABLE OF HYDRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATED POWER H1 Q = DELIVERY l/min 8,3 16,7, 33,3 2 5, 58,3 67 75, m³/h,5 1 1,5 2 2,5 3 3,5,5 kw HP Bar
SIKA Flow Switches -1-
SIKA Flow Switches -1- SIKA Flow Switches Reliable Safe Proven! Our tried-and-tested flow monitoring switches are used for two basic purposes: To ensure a minimum flow rate, e.g. of cooling water or lubricating
VSO - MI thermally compensated proportional valve
The VSO - MI is a miniature proportional valve specifically designed for medical device manufacturers and incorporates thermal compensation to provide precise flow control and stability over a wide operating
Pressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
TRIVAC NT, Two-Stage Rotary Vane Vacuum Pumps TRIVAC NT 5 to NT 25
TRIVAC NT, Two-Stage Rotary Vane Vacuum Pumps TRIVAC NT 5 to NT 25 (505)872-0037 The TRIVAC NT is the latest generation of well-proven rotary vane pumps. The performance and handling characteristics of
AG1-BC BUTTERFLY VALVE
AG1-BC BUTTERFLY VALVE From 1970 close to our clients Technical datasheet Butterfly valve.. Edition 9.4 09/2016 ANGODOS Since 1970 ANGODOS has been technological leader in valves industry, manufacturing
Vacuum Pads for Heavy Duty Material Handling thread Lateral vacuum entry. ø50 ø63 ø80 ø100 ø K K K K K K.
Pads for Heavy Duty Material Handling Series T/ Ideal for heavy weight material or objects with a large surface area Examples: CRT, Car body Pad diameters Pad materials Variations Style Series T Vertical
Seals Stretch Running Friction Friction Break-Out Friction. Build With The Best!
squeeze, min. = 0.0035 with adverse tolerance build-up. If the O-ring is made in a compound that will shrink in the fluid, the minimum possible squeeze under adverse conditions then must be at least.076
AV 23 Balancing valves SETTER Inline
AV Balancing valves SETTER Inline Application Direct reading and balancing valve with visual flow indication. Correct balancing of circuits ensure optimum efficiency of the system and can therefore help
Spare parts list ( ) HD 2.3/26 CV
Spare parts list (1.107-077.0) HD 2.3/26 CV 08.12.2015 www.kaercher.com EN Table of contents Order instructions HD 2.3/26 CV (1.107-077.0) 200 Spare parts list G 2600 PH 10 Frame 20 Pump set 21 Cylinder
1 01 / 201 Edition ED. 01/2007
Edition 01 / 2011 ED. 01/2007 TABLE OF CONTENENTS 1 INTRODUCTION 2 GRIPPER EXAMPLES 2.1 EXAMPLE A: GRIPPER WITH TUBES AND ALUMINIUM PROFILES 2.2 EXAMPLE B: GRIPPER WITH STAINLESS STEEL TUBES 2.3 EXAMPLE
Spare parts list ( ) Spare parts list B60 W Bp UL
Spare parts list (5.971-886.0) Spare parts list B60 W Bp UL 14.12.2012 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list B60 W Bp UL (5.971-886.0)... 6 10 Tank (0.166-284.0)...
Válvulas AG1-BD BUTTERFLY VALVE. From 1970 close to our clients
Válvulas AG1-BD BUTTERFLY VALVE From 1970 close to our clients Technical datasheet Butterfly valve.. Edition 2.5 06/2017 ANGODOS Since 1970 ANGODOS has been technological leader in valves industry, manufacturing
TOP MULTI. Submersible multi-stage pumps TOP MULTI 1 TOP MULTI 2-3. PERFORMANCE RANGE Flow rate up to 120 l/min (7.2 m³/h) Head up to 42 m
TOP MULTI Submersible multi-stage pumps Clean water Domestic use Civil use TOP MULTI 1-3 PERFORMANCE RANGE Flow rate up to 120 l/min (7.2 m³/h) Head up to 42 m APPLICATION LIMITS Immersion depth: up to
Related vacuum products
Vacuum component C O N T E N T S variation 420 Position locking valve () 422 Compact vacuum regulator () 426 Vacuum break unit () 436 Vacuum filter large volume union type (VSFB) 440 Compact vacuum filter
Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity
Profile Design ISO/VDMA Air Cylinder Series CP95 Improved end of stroke cushion capacity Piston rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. Increased
Selection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
Turcon Glyd Ring. Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer
Turcon Glyd Ring Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer 15 Turcon Glyd Ring 16 Turcon Glyd Ring Turcon Glyd Ring Description Successfully used for decades,
PGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
SERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
R310EN 2302 ( ) The Drive & Control Company
R31EN 232 (26.4) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical
Turcon RotoGlydRing. Latest information available at Edition August
Turcon RotoGlydRing 241 242 Turcon Roto Glyd Ring n TURCON ROTARY SEALS - ELASTOMER ENERGIZED n Turcon Roto Glyd Ring Description The Turcon Roto Glyd Ring is used to seal rods, shafts, axles, bores, rotary
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
Separators. pneumatic
Separators pneumatic Table of contents separators VEG-B Order no. Stroke Force in Force in Page [mm] retract [N] extend [N] Product Information 6 VEG10-B 10 30 40 10 VEG14-B 20 65 80 12 VEG15-B 40 65
Ball Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
EUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim. Pump aggregate. Drive: Use:
Pump aggregate GMG-B Use: As pump aggregate in central lubrication systems for the delivery of oil, liquid grease or grease 1 or 2 pump outlets up to 2 outlets with progressive distributor flanged-on -
Combination possibilities
Vacuum Components Combination possibilities Mini- Dimension vacuum cups [mm] Page SM 1 VGS-M F FV HS10 SM 2 VGS-M F FV HS10 SM 3 VGS-M F FV HS10 SM 4 VGS-M F FV HS10 SM 5 VGS-M F FV HS10 SM 6 VGS-M F FV
SP11-24 Rp2 4"3X /50 5.5kW
GRUNDFOS DATA BOOKLET SP11-24 Rp2 4"3X38-415/5 5.5kW Grundfos Pump 98699318 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/spfam/98699318/sp-11-24.html
B 90 R Adv Bp. Extremely easy to manoeuvre. Quick replacement. Simple operation. Long operating time
B 90 R Adv Bp The B 90 R Adv Bp battery-operated ride-on scrubber drier impresses with FACT, compact design, high flexibility, an expanded tank capacity and variable working widths (55-75 cm). 1 2 3 4
SP9-11 Rp2 4"1X /50 2.2kW
GRUNDFOS DATA BOOKLET SP9-11 Rp2 4"1X22-23/5 2.2kW Grundfos pump 9869924 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/spfam/9869924/sp-9-11.html
Return line and Suction Boost Filter RKM
Return line and Suction Boost Filter up to 850 l/min, up to 10 bar 80 100 120 151 201 251 201/-TH 300 350 400 800 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
Profile Gaskets. Profile Gaskets with Covering Layers. Grooved Gaskets with Standard Profile. Grooved Gaskets with Convex Profile.
Gaskets with Covering Layers Grooved Gaskets with Standard Gaskets Grooved Gaskets with Convex CONVEX Gaskets EN ISO 900 Gaskets Gaskets Gasket Types Page 3 Construction Materials Page 3 Grooved Gaskets
EUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim
Reciprocating pump PMF / GMF This is a multi-line reciprocating pump for many applications - Subject to modifications - Being a universal type, our reciprocating pump is capable of meeting any challenge.
Compressed Air Conditioning. accessories. One Stop Shop process reliable efficient economical high degree of reusability
Screwdriving technology Automation Air motors Air tools Compressed Air Conditioning and Accessories One Stop Shop process reliable efficient economical high degree of reusability DEPRAG offers a comprehensive
General information on radial seals
170 General information on radial seals Radial seals is the common name for shaft seals, which seal against a rotating shaft using an elastic and resilient lip of rubber or PTFE. The lip in turn is either
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 250 mm Between flanges PN16/40-28 C + 200 C Max Pressure : 40 Bars up to DN80, 16 bars over Specifications : With ISO 5211 mounting pad Contents
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
Selection and Types of 1199 Remote Mount Seal Systems
General Specifications and Datasheet 1199 Diaphragm Seal GSD- 1199DS-EV01 Selection and Types of 1199 Remote Mount Seal Systems Product Introduction Differential pressure transmitter assembly with remote
BR 30a. Pneumatic Multi-turn Actuator. Application: Special designs:
Pneumatic Multi-turn Actuator BR 30a Application: Single-acting pneumatic diaphragm multi-turn actuator for butterfl y valves and other rotary valves: The pneumatic BR 30a Multi-turn Actuators are diaphragm
PNCE ELECTRIC CYLINDER
ELECTRIC CYLINDER INDEX Characteristics 1 Structural design 2 How to order 3 Technical data 4 Dimensions 11 Accessories 12 Lubrication position 2 Motor adapter with coupling 2 Motor side drive with timing
Product data sheet. Series 210, DN (2½ - 6 ) Ordering No PE
Series 210, DN 63 160 (2½ - 6 ) Ordering No. 210..-PE06-000. Manual actuator with hand lever Advantages Three sizes available: DN 63, 100, 160 with ISO-F flanges All vacuum parts made of stainless steel
Polon Rod sealing set
The single-acting rod sealing set profile consists of a PTFE rod sealing ring and an elastomer O-Ring as a preloading element. The asymmetrical cross-section of the slipper ring is designed for best drag
ELADOS EMP IV E00 Diaphragm Pump type
ELADOS EMP IV E00 Diaphragm Pump type 01400 02100 Single phase motor with winding protection, standard Plastic external housing, metal internal housing High delivery capacity at low number of strokes Safety
VACUUM CUP SUPPORTS. 3D drawings available at
In the following pages are listed the cups for which each support is suited. They are specially shaped to perfectly adhere to the internal profile of the cups and they are provided with a male or female
TRITUS. Submersible pumps with grinder
TRITUS Submersible pumps with grinder Filthy water Domestic use Civil use PERFORMANCE RANGE Flow rate up to 26 l/min (5.6 m³/h) Head up to 3 m APPLICATION LIMITS m maximum immersion depth (with a sufficiently
Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8
Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole
DIN Coupling UNION COMPLETE F ORGED A ND CASTED DIN SKS EN A (DIN R2) Seals
SKS EN 10357-A (DIN 11850-R2) DIN 11851 Coupling The so-called dairy coupling according DIN 11851 is the most applied screw coupling within the food industry. The round thread and the huge tolerances ensure
Technical data Pressure (bar) : 10 Temperature ( C) : Sizes (mm) : Flange accommodation : DIN PN 10/(16)
50 300 mm wafer and lugged lined butterfly valves - Coilspring shaft sealing A PTFE lined solution according ISO 5752/5 short (EN 558-1/T5) with various corrosion resistant disc materials to satisfy demanding
Curaflex SEALING SYSTEM. Profile delivers top performance
Curaflex SEALING SYSTEM Profile delivers top performance Curaflex with DPS The essential feature of the new Doyma Curaflex -System is the unique DPS "Double Profile System". The two-sided, internal asymmetrical
INTRODUCTION. General Notes
INTRODUCTION Thank you for selecting a Shurjoint product. This manual covers the proper installation and assembly procedures for your product. To ensure the proper installation, assembly and performance
MULTI-COUPLING PLATES
MULTI-COUPLING PLATES MP Series Hydraulic Multi-Coupling Plate Overview - Front end loaders - Harvesting equipment - Construction machinery - Refrigeration - Snow removal equipment - Energy sector - Any
DR magnetic piston. Compact Magnetic Sophisticated
DR magnetic piston Compact Magnetic Sophisticated DR Magnetic piston Compact Magnetic Sophisticated Guiding area Magnet Steel disc Spring space for single-acting cylinders Static sealing area Cushioning
M10F Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210 Description: This series represents the logical and consistent supplementation of already ISO 6022 (250 bar) and ISO 6020/1 (160 bar) standard series.
KANTSEAL. -Axial sealing - -Elastomers-
KANTSEAL -Axial sealing - -Elastomers- 61 62 n Description The Kantseal is agood alternative to the O Ring as an axial static seal in cases where particular demands are made. The application and handling
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection