PARTS GUIDE Wayne Ave Chambersburg, PA Fax

Transcription

1 2017 PARTS GUIDE Wayne Ave Chambersburg, PA Fax EFFECTIVE: 01/01/2017 PRINTED: 1/11/2017 SPECIFICATIONS AND PRICES SUBJECT TO CHANGE WITHOUT NOTICE

2 TABLE OF CONTENTS CATEGORY SUB CATEGORY PAGE# COUPLERS & SURGE ACTUATORS 3 WHITE SPOKE WHEELS 3 ALUMINUM WHEELS 3 TIRES & WHEELS SILVER DIRECTIONAL WHEELS 3 GALVANIZED WHEELS 3 SPARE MOUNT KITS 3 DT FENDERS 3 EH FENDERS 3 FENDERS & ACCESSORIES TILT FENDERS 3 CH FENDERS 4 UT FENDERS 4 2K JACKS 4 5K JACKS 4 7K JACKS 4 JACKS & ACCESSORIES 10K JACKS 4 12K JACKS 4 JACK PARTS & ACCESSORIES 4 SAFETY CHAINS 4 WIRING & LIGHTS HYDRAULIC COMPONENTS SUSPENSION AXLES AXLE & BRAKE COMPONENTS GATES & GATE HARDWARE RAMPS & RAMP ACCESSORIES OPTIONS & MISCELLANEOUS PARTS PAINT & DECALS TRAILER TO TRUCK CONNECTORS 5 BREAKAWAY COMPONENTS 5 TRAILER HARNESSES 5 BOLT-ON LIGHTS 5 RUBBER MOUNTED LIGHTS 5,6 LICENSE PLATE LIGHTS 6 LIGHTS BOXES & BRACKETS 6 PUMP BOXES 6 POWER SUPPLY 6 MONARCH POWER UNITS 6 PUMP PARTS 6 HOSES 6 FITTINGS 7 HOISTS 7 CYLINDERS & ACCESSORIES 7 SHACKLES & SPRING BOLTS 7 DUST CAPS 7 HANGERS & EQUALIZERS 7 DEXTER 3.5K AXLES 8 DEXTER 5K AXLES 8 DEXTER 6K AXLES 8 DEXTER 7K AXLES 8 DEXTER 10K AXLES 8 DEXTER SURGE BRAKE AXLES 8 DEXTER AXLE BEAMS 8 9 TAILGATES & HARDWARE 9 COMBO GATES & HARDWARE 9,10 LANDSCAPE GATES 10 MISCELLANEOUS HARDWARE 10 RAMPS 10 RAMP ACCESSORIES 10,11 TARP KITS 11 TARP KIT PARTS 11 SIDE EXTENSIONS 11 MISCELLANEOUS OPTIONS 11 MISCELLANEOUS PARTS 11,12 HOLD DOWN LATCHES 12 TOUCH UP PAINT 12 DECALS 12,13

3 T T T T T T T T T T T T T T T T T T T T T T T T T B B B B T B T B B B P P B B B B B B SP B B B Brace B B B B B B B Brace 2017 COMPLETE PARTS GUIDE COUPLERS & SURGE ACTUATORS Surge Brake Actuator - Model 10 Surge Brake Actuator - Model 20 2" A-Frame Coupler - 5k 2" Adjustable Coupler - 12k 2-5/16" A-Frame Coupler 14k 2-5/16" Adjustable Coupler 20k 3" Adjustable Pintle Ring - 25k 2.5" Pintle Ring (4 bolt) 48k Adjustable Implement Hitch (farm wagon style) Channel (5 position) for Adjustable Coupler/Pintle 20k GN 2" KingPin w/ Insert 4" RD Coupler Lock Pin TIRES & WHEELS WHITE SPOKE WHEELS ST205/75R15 C 5Lug Radial on White Spoke Wheel ST225/75R15 D 6Lug Radial on White Spoke Wheel ST235/80R16 E 8Lug Radial on White Spoke Wheel ST205/75D15 C 5Lug Belted Bias on White Spoke Wheel (Fall 2015) ST225/75D15 D 6Lug Belted Bias on White Spoke Wheel (Fall 2015) ALUMINUM WHEELS ST205/75R15 C 5Lug Radial on Aluminum Spoke Wheel ST225/75R15 D 6Lug Radial on Aluminum Spoke Wheel ST235/80R16 E 8Lug Radial on Aluminum Spoke Wheel Aluminum Center Cap for 5 bolt Aluminum Center Cap for 6 bolt Aluminum Center Cap for 8 bolt 1/2" SS Lug Nuts for Aluminum Wheels - 5 and 6 lug 9/16" SS Lug Nuts for Aluminum Wheels - 8 lug SILVER DIRECTIONAL WHEELS ST205/75D15 C 5Lug Bias on Silver Directional Wheel ST225/75D15 D 6Lug Bias on Silver Directional Wheel ST205/75R15 C 5Lug Radial on Silver Directional Wheel ST225/75R15 D 6Lug Radial on Silver Directional Wheel GALVANIZED WHEELS ST205/75R15 C 5Lug Radial on Galvanized Spoke Wheel ST225/75R15 D 6Lug Radial on Galvanized Spoke Wheel ST235/80R16 E 8Lug Radial on Galvanized Spoke Wheel SPARE MOUNT KITS Spare Tire Mount for LP, LPHD, LE Series Dumps (Body Mount 20" Sides) Spare Tire Mount for R Series Dumps (Body Mount 17" Sides) Spare Tire Mount for EH, T, CH Series (tongue mounted) Spare Tire Mount for HT Series (mounts on tire stop rail) Spare Tire Mount for UT Series (mounts to upright tube and top rail) FENDERS & ACCESSORIES DT FENDERS Smooth Fender for Single Axle Dumps (+$25 painted) Diamond Plate Fender for Tandem Axle Dumps (+$25 painted) Diamond Plate Fender for Tri Axle Dumps (+$25 painted) DT Fender Gusset (RH front, LH rear) DT Fender Gusset (LH front, RH rear) Smooth Fender for Tandem Axle R Series (+$25 painted) Fender Light Guard (protects light on top of fender) EH FENDERS Tandem Diamond Plate Fender for EH, HT (+$25 painted) EH Fender Weldment (diamond plate fender, back and brace) (+$25 painted) EH Fender Gusset with Light Hole (RH front, LH rear) EH Fender Gusset with Light Hole (LH front, RH rear) EHLE Series Fender Weldment (+$25 Painted) TILT FENDERS T16 Fender Weldment (smooth fender, back and brace) (+$25 painted) T16 Fender Gusset (RH Front, LH Rear) T16 Fender Gusset (LH Front, RH Rear) HT Fender Weldment (diamond plate fender, back and brace) (+$25 painted) PAGE - 3

4 B B B B B B B B B T B SP T T T T T B B B B T B B T T T B H B B B B T T T FENDERS & ACCESSORIES (CONT) CH FENDERS CH Series Fender (complete weldment - smooth) (+$25 painted) CH Fender Bracket (LH front, RH rear) - welds to trailer CH Fender Bracket (RH front, LH rear) - welds to trailer CHT Series Fender (complete weldment - smooth) (+$25 painted) CHT Fender Bracket (LH Front, RH Rear) - welds to trailer CHT Fender Bracket (RH Front, LH Rear) - welds to trailer Vibration Mount for Car Hauler Fenders - old style Fender Knob for Car Hauler Fenders UT Single Axle Fender Weldment (+$25 Painted) UTE Single Axle Fender Weldment (+$25 Painted) UT Tandem Axle Fender Weldment (+$25 Painted) UTE Tandem Axle Fender Weldment (+$25 Painted) JACKS & ACCESSORIES 2K JACKS 2k Top Wind Jack (post type) 5k Top Wind Jack (post type) 5k Swing Jack UT FENDER 5K JACKS 8K JACKS 8k Side Wind Drop Leg Jack (7k Lift, 8k Static) (no plate) 8k Side Wind Drop Leg Jack (7k Lift, 8k Static) (w/ plate) for LP, DT610-DP, T512, and 8k Side Wind Drop Leg Jack (7k Lift, 8k Static) (w/ plate) for LPHD series, DT712-DP 8k Side Wind Drop Leg Jack (7k Lift, 8k Static) (w/ plate) for EH, T16, and HT series 8k Side Wind Drop Leg Jack (7k Lift, 8k Static) (w/ plate) for T512 / T712 12K JACKS 12k Drop Leg Jack (10k Lift, 12k Static) (no plate) 12k Drop Leg Jack (10k Lift, 12k Static) (w/ plate) for LPHD series dump trailers 12k Drop Leg Jack (10k Lift, 12k Static) (w/ plate) for EH8 and HT8 Series 50k Drop Leg Jack Set 2-Speed (50k lift, 140k static) JACK PARTS & ACCESSORIES Jack Foot Plate (for post type) Crank Handle for 8k Drop Leg Jack Crank Handle for 12k Drop Leg Jack (w/ nipple) 4" X 7" Mounting Plate - 7k Jacks 5" X 7" Mounting Plate - 7k -12k Jacks 8" X 11" Mounting Plate - Gooseneck Jacks Tube adaptor (Jack Handle Extender) for 12k Jacks SAFETY CHAINS Safety Chains 1/4 - Trailers < 5k GVWR (ea.) Safety Chains 1/4 - GR70 Gold - Trailers 7k - 12k GVWR (ea.) Safety Chains 3/8 - GR43 - Trailers > 14k GVWR and Goosenecks PAGE - 4

5 B C B C8 B C B C B C B B Main Harness for DT508LP Main Harness for 10' L and 12' L LP, LPHD, LE Series B Main Harness for 14' L and 16' L LP, LPHD, LE Series B Wiring Harness for Low Profile R Series B Main Harness for R610D B B B B B Main Harness for DT610-DP Main Harness for DT712-DP Wiring Harness for DT8 Series Main Harness for EH14, EH16, EHLE14, EHLE16, and CH16 Main Harness for EH18, EH20, EHLE18, CH18, CH20 B Main Harness for EH820 B B B B B B B Main Harness for T16 Main Harness for HT16 and HT18 Main Harness for HT20D Main Harness for HT820 Main Harness CHT Series Wiring Harness for 8', 10' & 12' UT Series Wiring Harness for 14', 16' & 18' UT Series B C Rear Harness for DT508LP B C Rear Harness for 6' W and 7' W LP, LPHD, LE Series B Rear Harness for LE Series B B B C Rear Harness for DT610-DP Rear Harness for DT712-DP Rear Harness for EH, EHLE, T512, T712, and HT Series B B Rear Harness for DT8 and EH820 Rear Harness for T16 and CHT Series B C B C B B C Intermediate Harness for HT16 and HT18 Rear Harness for HT20D Rear Harness for HT820 & HT824 Rear Harness for CH Series T T T T T T T T T T B B B T B T T COMPLETE PARTS GUIDE REAR & INTERMEDIATE HARNESS (early 2016 and older for trailers w/o a junction box) Limited Supply Amber Side Marker Light Tail Light LH - LED Tail Light RH - LED Tail Light LH Tail Light RH 3-Bar Sealed Beam Light - LED Fender Light - amber and red - mounts on top of DT/UT fenders Fender Light Base Metal License Plate Bracket (used w/ stud mounted tail lights) 2" Round Grommet 4" Round Grommet Oblong Grommet Oblong Tail Light - LED WIRING & LIGHTS TRAILER TO TRUCK CONNECTORS (early 2016 and older for trailers w/o a junction box) Limited Supply 7-Way RV Plug w/ Cord & Connector 7-Way RV Plug w/ Cord & Connector for T Series & GNs 6-Way RV Plug with Cord and Connector 7-Pin Truck Style Plug (Pollack) with Cord and Connector 4-Way Flat Plug with Cord and Connector TRAILER HARNESSES - As we update all harnesses to the newer sealed harness, please call for replacement options on items MAIN HARNESS (early 2016 and older for trailers w/o a junction box) Limited Supply WIRING (mid 2016 and later for trailers with a junction box) 7-Way RV Plug w/ 6' Cord and Ring Connectors 7-Way RV Plug w/ 8' Cord and Ring Connectors 4-Way Flat w/ 4' Cord Weatherproof Junction Box (plastic) All Harnesses are Custom Made Trailer Specific - Call with Trailer Model BOLT-ON LIGHTS RUBBER MOUNTED LIGHTS PAGE - 5

6 B T T T T B T T T T T B T T T P P P B T T B T T T T B B B B B T B B B B B B N B B W B B B B B B B B A B B O B B B B B B B COMPLETE PARTS GUIDE RUBBER MOUNTED LIGHTS (CONT) 4" Round Tail Light - LED 3/4" Red Marker Light - LED 3/4" Amber Marker Light - LED 2" Round Red Marker Light - LED 2" Round Amber Marker Light - LED LICENSE PLATE LIGHTS Bolt-on License Plate Light (effective Nov. 2010) - chrome cylinder style License Plate Light Chrome - LED (effective mid-2016) LIGHTS BOXES & BRACKETS Front Corner Light Bracket (LP's, EH's, HT's, and CH's) w/ 2" Marker Front Corner Light Bracket (LP's, EH's, HT's, and CH's) w/ 3/4" Marker LH Tail Light Box Weldment (EH's, and T's) w/ 2" Marker RH Tail Light Box Weldment (EH's, and T's) w/ 2" Marker Tail Light Box Weldment for HT (both LH and RH) w/ 2" Marker LH Tail Light Box Weldment (EH's, HT's and T's) w/ 3/4" Marker RH Tail Light Box Weldment (EH's, HT's and T's) w/ 3/4" Marker Tail Light Box Weldment for HT (both LH and RH) w/ 3/4" Marker HYDRAULIC COMPONENTS PUMP BOXES Large Toolbox Assembly (Painted) HT Series Toolbox Assembly (Painted) Gooseneck Toolbox Assembly (Painted) Tool Box Grommet (hose protector) AC Plug Holder Paddle Latch for Pump Box Gas Cylinder for Pump Box (prior to 01/2014 w/ 8" Stroke) Gas Cylinder for Pump Box (after 01/2014) Gas Cylinder for Aluminum Tool Box (CH) Keys for Paddle Latch Lock (specify lock id number) POWER SUPPLY 5Amp, 110 Volt Battery Charger Positive 4GA Battery Cable - 16" Negative 4GA Battery Cable - 16" 24' Battery Cable for Dump Insert from Truck Battery to Pump BUCHER (MONARCH) POWER UNITS Single Cylinder Pump Assembly (2.5 Gallon) Twin Cylinder Pump Assembly (4.5 gallon) Power Up / Power Down Pump Assembly (1.5 gallon) - now w/ rear ports Reservoir Only - Poly (Single Cylinder 2.5 gallon) Reservoir Only - Poly (Twin Cylinder 4.5 gallon) Reservoir Only - Poly (PU/PD 1.5 gallon) Reservoir Cap BUCHER PUMP PARTS Starter Solenoid (silver canister) Starter Solenoid (black canister) Down Valve (2-way, 2-position) (00488) Down Valve (4-way, 2-position) (00455-D) Rear Valve on Pumps Coil (2-way, 2-position magnet) (00496) Shaft Seal (02159) O-ring Seal (between pump and reservoir) (02352) Remote with Cord (power up / gravity down) 20' Remote with Cord (power up / power down) 25' Remote Only (power up / power down) Wireless Remote Control Kit w/ two fobs (ALTA) Antenna Only for Wireless Remote (ALTA) Fob Only for Wireless Remote (ALTA w/ Cover) Fob Only for Wireless Remote (ALTA w/out Cover before Sept-2016) HOSES 58" Hydraulic Hose 38" Hydraulic Hose 68" Hydraulic Hose 64" Hydraulic Hose 80" Hydraulic Hose 87" Hydraulic Hose 56" Hydraulic Hose with 90 Degree Swivel (used on Dump Insert) PAGE - 6

7 T B B T B P P B B B B B B B T B B B B B O B T T B B B T T T T T B T T B B B B T T T T T B B B T B T T T B B T COMPLETE PARTS GUIDE HYDRAULIC COMPONENTS (CONT) FITTINGS 90 degree Pump/Cylinder Fitting T-Fitting Coupler - 3/8" Straight (joins two hoses together) 3/8" Male ORB 3/8" Female NPT - Swivel 90 Deg. JIC Adapter - 3/8" NPT Male - for Dump Insert Cylinder DUMP INSERT HOISTS Hoist for Dump Insert (cylinder not included) Link Supports (flat bar straps with holes at each end) CYLINDERS & ACCESSORIES 3" Cylinder for 3k and 5k LP and R series dump trailers 3" Cylinder for R series deck over 3" Cylinder for 7k LP, LE, and R series dump trailers 4" Cylinder for 10k and 12k LP, LE, and R series dump trailers Telescopic Cylinder for LPHD & 14k LE series dump trailers 4" Double-Acting Cylinder for HT's Cylinder for CHT Series (and DI Series prior to 01/2016) Cylinder for DI series (01/2016 and later) Cushion Cylinder for T512 and T712 Seal Kit for 3" Cylinder Seal Kit for 4" Cylinder Seal Kit for Telescopic Cylinder (Beiler) - since Jan 2012 Seal Kit for Telescopic Cylinder (Olson) - Dec 2011 and prior Seal Kit for 4" Double-Acting Cylinder Cylinder Mounting Pin (1"x7" Solid Rod) Cotter Pin (1/4"x2") 11" G8 Bolt for Dump Insert Hoist / Cylinder 9" G8 Bolt for Dump Insert Hoist / Cylinder 1" Nut (fits bolts and ) SUSPENSION SHACKLES & SPRING BOLTS Shackle Bolt (9/16" x 3") - used on II suspensions Shackle Bolt (9/16" x 3.5") - used on SS suspensions Shackel Lock Nut (9/16") Keeper Bolt (5/16") - holds slipper spring up in the rear Keeper Hex Nut (5/16") Nylon Bushings for Leaf Springs Shackle Link (3-1/8") Shackle Link (2-1/4") DUST CAPS 3.5k Axle Dust Cap (1.99 OD) 5.2k Axle Dust Cap (2.44 OD) 6k or 7k Axle Dust Cap (2.72 OD) Rubber Centerpiece HANGERS & EQUALIZERS 11" Equalizer - SS for DT610-DP, DT712-DP 13" Equalizer - SS for LPHD, EH, T, HT Series Equalizer Bolt (7/8" x 4.62") Equalizer Lock Nut (7/8") Cast Equalizer - II for LP, R, LE, CH, CHT, UT Series Bullnose Equalizer - used on T16 Gravity Tilt Series Front Hanger II for Single Axle Unit Rear Hanger II with Bushing for Single Axle Units Front and Rear Hanger II for Tandem Axle Units Center Hanger II for Tandem Axle Units Front Hanger SS for LPHD, EH, DT DP Center Hanger SS for LPHD, EH, DT DP Rear Hanger SS for LPHD, EH, DT DP Front Hanger SS for DT610-DP, DT DP Center Hanger SS for DT610-DP, DT DP Rear Hanger SS for DT610-DP, DT DP PAGE - 7

8 B D B D B D B D B D T B D B D T B D B D B D B D T B D B D B D B D B D B D B D B D B D B D B D B D B D B D B D B D B B B B B B B B B B B B B B B AXLES DEXTER 3.5K AXLES Axle Assembly for DT508LP-3/DTR508LP-3 (3.5k 73" x 58" II Idler 5 lug) Axle Assembly for DT510LP-7/R510LP-7 (3.5k 71.5" x 58" II 5 lug) Axle Assembly for DT610LP-7/DT610LE-7/DTR610LP-7 (3.5k 85" x 70" II 5 lug) Axle Assembly for DT610-7-DP (3.5k 61" x 46" SS 5 lug) Axle Assembly for UT-5 (3.5k 73" x 58" II 5 lug) Axle Assembly for UTE-5 (3.5k 71 x 58" II 5 lug) Axle Assembly for UT-6, UTE-6 (3.5k 88" x 74" II 5 lug) Axle Assembly for UTE-6 TANDEM AXLE (3.5k 88" x 74" II 5 lug) Axle Assembly for UT-7 (3.5k 94" x 80" II 5 lug) DEXTER 5K AXLES Axle Assembly for DT508LP/510LP-5/DTR508LP-5/510LP-5 (5.2k 73" x 58" II 6 lug) Axle Assembly for 10K DT610LP/612LP/610LE/612LE/R610LP (5.2k 85" x 70" II 6 lug) Axle Assembly for DT712LP-10/DT712LE-10 (5.2k 93" x 77" II 6 lug) Axle Assembly for DT712LPHD-10/EHLE-10 (5.2k 93" x 77" SS 6 lug) Axle Assembly for DT DP (5.2k 61" x 46" SS 6 lug) Axle Assembly for DT DP (5.2k 73" x 58" SS 6 lug) Axle Assembly for 10k EH/T/HT Series (5k 93.75" x 77" SS 4" drop 6 lug) Axle Assembly for 10k EH8/HT8 Series (5.2k 78" x 62" SS 6 lug) DEXTER 6K AXLES Axle Assembly for DT612LP-12 (6k 85" x 70" II 8 Lug) Axle Assembly for DT712LP-12/DT712LE-12 (6k 93" x 77" II 8 lug) Axle Assembly for 12k LPHD/EH/T/HT Series (6k 93.75" x 77" SS 4" drop 8 lug) Axle Assembly for DT716LPHD-12 (6k 93" x 77" SS 8 lug) Axle Assembly for DT712T-12-DP (6k 74" x 58" SS 8 lug) Axle Assembly for 12k EH8/HT8 Series (6k 78" x 62" SS 8 lug) Axle Assembly for T512-6 (6k 73.75" x 58" SS 4" drop 8 lug) DEXTER 7K AXLES Axle Assembly for 14k LPHD/EH/T/HT Series (7k 93.75" x 77" SS 4" drop 8 lug) Axle Assembly for DT716LPHD-14/DT714LE-14/712LE-14 (7k 93" x 77" SS 8 lug) Axle Assembly for DT712T-14-DP (7k 74" x 58" SS 8 lug) Axle Assembly for 14k EH8/HT8 Series (7k 78" x 62" SS 8 lug) DEXTER SURGE BRAKE AXLES Axle Assembly for DT610LP-7-Surge Brake (3.5k 85" x 70" II 5 lug) Axle Assembly for DT610LP-10-Surge Brake (5.2k 85" x 70" II 6 lug) DEXTER AXLE BEAMS Axle Beam for DT508LP-3 and DTR508LP-3 ( D) Axle Beam for DT508LP-5 and DT510LP-5 ( D) Axle Beam for DT610LP-7 ( D) Axle Beam for DT610LP-10 and DT612LP-10 ( D) Axle Beam for DT712LPHD-10 ( D) Axle Beam for 12k LPHD/EH/T/HT Series ( D) Axle Beam for 14k LPHD/EH/T/HT Series ( D) Axle Beam for DT716LPHD-12 ( D) Axle Beam for DT716LPHD-14 ( D) Axle Beam for DT610-7-DP ( D) Axle Beam for DT DP ( D) Axle Beam for DT DP ( D) Axle Beam for DT712T-12-DP ( D) Axle Beam for 10k EH/T/HT Series ( D) Axle Beam for UT-7 ( D) PAGE - 8

9 B B T B T B B B B B B B B B B B B B B B B B B B B B B P P rev3 P P P P P P P P B T B T P P P P P UF P UF P P P P AXLE & BRAKE COMPONENTS 1/2" Wheel Stud (Dexter) - long and current 1/2" Wheel Stud (Dexter) - short and used prior to Jan /16" Wheel Stud (Dexter) - started usage Jan 2014 on 7k axles 1/2" Lug Nut (ea.) 9/16' Lug Nut (ea.) (used on 7k axles after Jan 2014) Stainless Steel Lug Nuts for Aluminum Wheels - see Tire and Wheels page U-Bolt Kit for 5.2k, 6k, and 7k SS Axles (kit completes 1 axle) U-Bolt Kit for 3.5k II Axles (kit completes 1 axle) U-Bolt Kit 5.2k and 6k II Axles (kit completes 1 axle) 1750# Spring II for 3.5k Axle 3500# Spring II for 5.2k & 6k Axle 3500# Spring SS for 5.2k, 6k & 7k Axle Magnet for Electric Brake - 10" for 3.5k Axle Magnet for Electric Brake - 12" for 5k, 6k, & 7k Axle 10" Electric Brake Assembly LH for 3.5k Axle 10" Electric Brake Assembly RH for 3.5k Axle 12" Electric Brake Assembly LH for 5k, 6k & 7k Axle 12" Electric Brake Assembly RH for 5k, 6k & 7k Axle 10" Hydraulic Brake Assembly LH for 3.5k Axle 10" Hydraulic Brake Assembly RH for 3.5k Axle 12" Hydraulic Brake Assembly LH for 5k, 6k & 7k Axle 12" Hydraulic Brake Assembly RH for 5k, 6k & 7k Axle 10" Brake Drum for 3.5k Axle - 5 lug (bearings not included) 12" Brake Drum for 5.2k Axle - 6 lug (bearings not included) 12" Brake Drum for 6k and 7k Axle - 8 lug (bearings not included) 3.5k Bearing Kit (Includes Inner & Outer Bearings, Seal, Cap, Races, Lug Nuts) 5.2k Bearing Kit (Includes Inner & Outer Bearings, Seal, Cap, Races, Lug Nuts) 6k and 7k Bearing Kit (Includes Inner & Outer Bearings, Seal, Cap, Races, Lug Nuts) GATES & GATE HARDWARE TAILGATES & HARDWARE Tailgate for DTR508LP / DTR510LP - this gate is 15" high like the trailer sides Tailgate for older DTR508LP / DTR510LP - this gate is 18" high Tailgate for DT508LP / DT510LP - this gate is 20" high Tailgate for 6' Wide LP, LE, and Deck Over dump trailers Tailgate for 6' Wide Low Profiles and Deckovers (old design - 4 pins) Tailgate for 7' Wide LP, LPHD, and LE series dump trailers Tailgate for DT712 Deckover (current) Tailgate for DT712 Deckover (old design - 4 pins) Tailgate for DTR610LP / DTR610D Tailgate for Dump Insert ( ) Upper Tailgate Pin (horizontal) - price includes "R" clip retainer pin B Lower Tailgate L-Pin (vertical) - price includes "R" clip retainer pin B Clip Retainer "R" Pin Spring L-Pin Latch Assy 1/2" (for dump insert tailgate and BM fold down sides) COMBO GATES & HARDWARE Combo Gate Kit for 5' Wide LP series dump trailers Combo Gate Kit for 6' Wide LP and LE series dump trailers Combo Gate Kit for 7' Wide LP, LPHD, and LE series dump trailers Combo Gate Kit for 7' Wide DP series dump trailers U-Bracket for 6' Wide Combo Gate U-Bracket for 7' Wide Combo Gate Barn Door RH (Passenger Side) for 6' Wide Combo Gate Barn Door LH (Driver Side)for 6' Wide Combo Gate Barn Door RH (Passenger Side) for 7' Wide Combo Gate (low profile w/ 81.5" inside Barn Door LH (Driver Side) for 7' Wide Combo Gate (low profile w/ 81.5" inside width) PAGE - 9

10 B B B YBB B T B B T B B T B B B P P P P P P P P P P P T T P P P P P P P B B B B T T A P P P P P P P B B B B B B GATES AND GATE HARDWARE (CONT) COMBO GATES AND HARDWARE (CONT) Bottom Door Hinge (short - welds to u-frame) Bottom Door Hinge (long - welds to door) Upper Hinge Bracket (includes the holdback L-pin, spring, roll pin) - Raw Pin Upper Hinge Bushing (welds to B YB and B /998) Door Hold Back Assembly (includes L-pin, spring, roll pin) - Plated Pin Beveled Hold Back Pin Catch LH (beveled slide with hole) Beveled Hold Back Pin Catch RH (beveled slide with hole) Center Spring Latch for Combo Gate - Plated Bolt-On Upper Pivot Hinge (welds to outside top of rear trailer tube) Bottom Tailgate Catch (welds to outside bottom of rear trailer tube) Grease Fitting Upper Pivot Bolt (3/4" x 1-3/4") Door Hinge Bolt (3/4" x 4") Lock Nuts 3/4" LANDSCAPE GATES Landscape Gate Kit for DT508LP / DT510LP (for units with 20" sides) Landscape Gate Kit for DT508LP (for old style units with 18" sides) Landscape Gate Kit for 6' Wide Units Landscape Gate Kit for 7' Wide Units Landscape Gate Kit for 5' Wide R Series Dump Trailers Landscape Gate Kit for 6' Wide R Series Dump Trailers Landscape Gates (split w/ assist springs) for EH series - 5 ft. RH (ea) Landscape Gates (split w/ assist springs) for EH series - 5 ft. LH (ea) Landscape Gate (split w/ assist springs) for EH820/EH824-6 ft. RH (ea) Landscape Gate (split w/ assist springs) for EH820/EH824-6 ft. LH (ea) Drive-on Gate for UT508/510 Drive-on Gate for UTE508/510 Drive-on Gate for UTE610/UTE612/ UTE614/ UTE616 Drive-on Gate for UT610/612/614 LH Side ( RH) Drive-on Gate for UT610/612/614 RH Side ( LH) Drive-on Gate for UT714/716/718 LH Side ( RH) Drive-on Gate for UT714/716/718 RH Side ( LH) Heavy Duty Drive-on Gate for UT714/716/718 LH Side ( RH) Heavy Duty Drive-on Gate for UT714/716/718 RH Side ( RH) Drive-on Gate for SU-508 and SU-510 MISCELLANEOUS HARDWARE Upper Casting Keeper (used on 44" high side units) Lower Casting Keeper (used on 44" high side units) Door Hold Back (old style with plastic plunger, rubber receiver) Cam Hook (old style bottom closure for combo gates) RAMPS & RAMP ACCESSORIES RAMPS Ladder Ramp (channel rails) for LP series dump trailers - each Aluminum Ladder Ramp for Dumps - each Ladder Ramp for LE Series each (over fender mount style) - prior to 2015 EH and EHLE Series Ladder Ramp, Painted (ea.) EH and EHLE Series 6' Wood Filled Ramp, Painted (ea.) ELE and EH818LE Series Ladder Ramp, Painted (ea.) Ladder Ramps for EH820 / EH824-6 ft. (ea.) Wood Filled Ramps for EH820 / EH824-6 ft. (ea.) CH Series Ramp, Painted (ea.) RAMP ACCESSORIES Ramp Latch Hardware Kit (J-Rod, Spring, Washer, Cotter Pin) Ramp Latch for DT and CH Ramps (plated J-shaped rod) Latch Spring (used on ramp latch ) Ramp Angle (welds to rear of 6' wide trailers to hook ramps onto when loading) Ramp Angle (welds to rear of 7' wide trailers to hook ramps onto when loading) LE Ramp Retention Kit (incl. washer, pin, r-clip, lanyard & clips) per side - prior to 2015 PAGE - 10

11 B B B B T B T T P B B B B B B B B B B B B P P P P P P P P P P P P P P P P B T T B T P P P T B T P B P RAMPS AND RAMP ACCESSORIES RAMP ACCESSORIES (CONT) Pivot Pipe (now Galvanized) for Ramps (EH & EHLE Series 81") Pivot Pipe (now Galvanized) for Ramps (EH8 Series 96") Solid Pivot Pipe for Ramps (EH Series 14k gvwr 81") Solid Pivot Pipe for Ramps (EH8 Series) - not used after summer 2015 Pivot Pipe (Galv) 41" long for Ramps (EH8 Series) - started summer 2015 Lug for Pivot Pipe for EH (pipe slides through 3 of these at trailer rear) Assist Spring - LH (2.25 ID) Assist Spring - RH (2.25 ID) 42" Ramp Strap for EH (holds the ramp in vertical position) Lynch Pin w/ Lanyard for EH Ramps (holds the strap in position) Ramp Strap Mounting Pin (weld on, holds ramp strap to trailer) OPTIONS & MISCELLANEOUS PARTS 5' Tarp Kit for 5' Wide Dumps 6' Tarp Kit for 6' Wide Dumps 7' Tarp Kit for 7' Wide Dumps 8' Tarp Kit for 8' Wide Dumps TARP KITS TARP KIT PARTS Tarp Only - 6' x 16' Tarp Only - 7' x 18' Tarp Only - 7'.5" x 20' Diamond Plate Cover for 6' Tarp Kit (part: ) Diamond Plate Cover for 7' Tarp Kit (part: ) Crank Handle (new style - slotted) SIDE EXTENSIONS Side Extensions for 5' x 8' dump trailers Side Extensions for 5' x 10' dump trailers Side Extensions for 6' x 10' dump trailers Side Extensions for 6' x 12' dump trailers Side Extensions for 7' x 12' dump trailers Side Extensions for 7' x 14' dump trailers Side Extensions for 7' x 16' dump trailers Side Extensions for 86" x 12' dump trailers (DT712-DP) Side Extensions w/ rear barn doors for 6' x 10' dump trailers Side Extensions w/ rear barn doors for 6' x 12' dump trailers Side Extensions w/ rear barn doors for 7' x 12' dump trailers Side Extensions w/ rear barn doors for 7' x 14' dump trailers Side Extensions w/ rear barn doors for 7' x 16' dump trailers Side Extensions Kit for 8' Dump Insert Side Extensions Kit for 6' Dump Insert Tailgate Extension for 8' and 6' Dump Insert Board Gusset Kit MISCELLANEOUS OPTIONS 1/2" D-Ring w/ Bolt-On Bracket - 4k 1/2" D-Ring w/ Weld-On Bracket - 4k D-Ring (flush mount) - used on CHT series Stake Pocket (formed 2"x4") CH Winch Plate Bolt on Winch Plate for Car Hauler HT Winch Plate (requires two of sleeves below) HT Winch Plate Sleeve (2 required) Cab Protector for DI-100 Insert Aluminum Box for Car Haulers Pallet Fork Holders Kit Weight Distribution Brackets (ea.) Outrigger Kit PAGE - 11

12 P P T B B B B B B B B B T T T T T T T T T T T T T T T B B B B B B B B B B B B B B B B B B B B B B B B B MISCELLANEOUS PARTS (CONT) Dump Insert Hold Down Clamp Chain Tray Cover for EH Series with Hasp Rubber Bed Cushion (between frame and bed) - new style large Rubber Bed Cushion (between frame and bed) - old style small Mud Flap (ea.) - small with Bri-Mar printed on Hold Down Latch for DT716LPHD Latch Catch for DT716LPHD & T series Mounting Bracket (welds to body for mounting catch) Mounting Bracket (welds to frame for mounting latch) HOLD DOWN LATCHES FOR T512 AND T712 Hold Down Latch for T series Latch Catch for DT716LPHD & T series Mounting Bracket (welds to frame for mounting latch) PAINT & DECALS Hammertone Gray Aerosol Touchup Hammertone Black Aerosol Touchup Black Aerosol Touchup Red Aerosol Touchup John Deere Green Aerosol Touchup Coates Gray Aerosol Touchup White Aerosol Touchup Orange Aerosol Touchup Blue Aerosol Touchup Lime Green Aerosol Touchup Safety (John Deere) Yellow Aerosol Touchup Dark Green Aerosol Touchup CAT Yellow Aerosol Touchup Decal - Bri-Mar Logo 1 Piece (2.5" x 15") 2016 and later Decal - Bri-Mar Logo 1 Piece (4 x 22) 2016 and later Decal - Bri-Mar Logo Die-Cut (Small) Decal - Bri-Mar Logo Die-Cut (Large) Decal - Bri-Mar Logo Die-Cut (X-Large) Decal - bri-mar.com Decal - DT508LP Decal - DT510LP Decal - DT610LP Decal - DT612LP Decal - DT712LP Decal - DT612LPHD Decal - DT712LPHD Decal - DT714LPHD Decal - DT716LPHD Decal - 610LE Decal - 612LE Decal - 712LE Decal - 714LE Decal - DTR508LP Decal - DTR510LP Decal - DTR610LP Decal - DTR610D Decal - DT610 Decal - DT712 Decal - DT712T Decal - DT818G MISCELLANEOUS PARTS HOLD DOWN LATCHES FOR DT716LPHD TOUCH UP PAINT BRI-MAR LOGOS MODEL SPECIFIC DECALS PAGE - 12

13 B B B B B B B B B B PAINT & DECALS SAFETY DECALS Decal - "Ball/Chains/Tires Warning" Decal - "Pintle/Chains/Tires Warning" Decal - "Gooseneck/Chains/Tires Warning" Decal - "Warning" Decal - "Safe Loading" Decal - "Danger/Caution/Warning" Decal - "Dump Warning" Decal - "Safety Prop Caution" Decal - Red Reflector Decal - Silver & Red Reflector Tape (per foot) PAGE - 13