PRODUCT OUTLINE BORING BAR IDENTIFICATION SYSTEM PRODUCT LINEUP SOLID BARS BORING BARS WITH POSITIVE INSERTS BORING BAR SLEEVES

Transcription

1 ODU OUIN IDNIIION SYS ODU INU SOID S Z Z- / Z-S / Z-N 14 Z US S-S / -S 18 Z (OIIN / OYIN) ZV 19 DOU-SIDD IO-S / 28 IO-S S-S / S-S 29 SWISS IQ S (IO ) VN-S / VN / VN / VNX-S 30 WIN S W / W 36 S WI OSIIV INSS INSS Dynamic ar 38 INSS Dynamic ar 40 / INSS oring ar - eneral urpose 42 D INSS Dynamic ar 44 D INSS oring ar - eneral urpose 48 INSS oring ar - eneral urpose 50 INSS Dynamic ar 51 / INSS Dynamic ar 52 / INSS oring ar - eneral urpose 54 V / V / V INSS Dynamic ar 58 W / W INSS Dynamic ar 64 W / W INSS oring ar - eneral urpose 66 SVS Z- / Z- / Z-S / Z S , ONDD UIN ONDIIONS

2 Z DS INSS N & D Z ar Kyocera s Original Z djust Structure asy adjustment and high precision Z ar minimizes deviation with high rigidity clamping O 1225 for Stable utting and xtended ool ife UNIN Kyocera's Original Z djust Structure OOVIN U-O Overhang ength is djustable eplaceable djustment in DIN SOID ND IS ool reparation ime is educed igh recision utting with igh epeatability IIN Overhang ength S S djustment in is eplaceable asy adjustment and high precision after bar changes due to adjustable overhang lengths. NI hipbreaker Without ead ngle oring Insert ineup hipbreaker with ead ngle N (Without hipbreaker) rooving Insert ineup eneral urpose Short Shank INDX D N Inserts vailable ough dge (eneral urpose) Sharp utting (for inishing) No hipbreaker (for rass and Non-ferrous aterials) ecommended ecommended ore than 0.008" D.O.. D.O.. ess than 0.008" pplicable for Various pplications ow utting orce and nti-chattering New ZV for internal profiling New Z ar lus lineup added Visit us online at Kyocerarecisionools.com

3 DYNI icro oring Double-Sided icro-ars ost efficient 2-edge inserts. inimum bore diameter 2.0mm. djustable overhang length. Integral shank is adopted to enable installation to standard sleeves. Sleeves are applicable to various machine manufacturers' specifications. DS INSS oring ack oring rooving ace rooving hreading N & D UNIN New Dynamic ar oolholder design through stress analysis: aximum structural thickness for high rigidity. ontrols chattering to achieve stable machining. arge chip pocket: xhibits superior chip evacuation. Dynamic design driven by the latest computer simulation technology nti-chatter Vibration erformance hip vacuation Direction S() etter vacuation by Dual hip low S() Superior hip vacuation (xternal oolant) Inside the Workpiece Dynamic ar ompetitor ompetitor OOVIN U-O DIN SOID ND IS IIN S S <utting onditions> 4415 Vc=500sfm D.O..=0.020" f=0.004ipr S16-S Y Surface Wall Surface oughness Dynamic ar ompetitor ompetitor a=0.4µm z=2.3µm a=0.6µm z=3.6µm a=3.4µm z=14.0µm <utting onditions> 4415 Vc=700sfm D.O..=0.020" f=0.004ipr 16Q-S X(V7020) /D=4 xternal oolant Direction of Vibration easurement NI INDX Oscillatory Waveform In ompetitor and 's products chips remain inside the workpiece, but chips from Dynamic ar are all evacuated from the workpiece. Surface inish omparison Visit us online at Kyocerarecisionools.com 3

4 IDNIIION SYS oring ar Identification System (ound Shank) DS INSS N & D S (with coolant hole) NSI (in) ISO (mm) : : : K : : : N : : Q : arbide : S : arbide (with coolant hole) X : Special S : Screw lamp : 80 hombic D : 55 hombic : 70 hombic : 60 riangle V : 35 hombic W : 80 rigon : ight-hand : eft-hand Optional ode : Dynamic ar : xcellent ar (Dynamic ar type) Shank oolholder ength lamping System Insert and of ool Others UNIN NSI (inch) S 08 S 3 3 OOVIN ISO (metric) S 12 S U-O Shank Diameter utting dge ngle Insert elief ngle Insert Size in. ore Dia. Q DIN SOID ND IS U Z : 5 ositive : 7 ositive : 11 ositive IIN uidelines for Overhang ength of oring ar (Workpiece aterial 1045) Shank aterial /D xample S S (Dynamic ar) xcellent ar (Dynamic ar) 4.0 S S- 5.5 S- arbide 7.0 () S NI arbide Shank ar Standard Size INDX Short Shank Series Short Shank ypes with length of 1/2 and 2/3 of standard type are available. (1/2 or 2/3 is shown at the end of the description) 2/3 Size 1/2 Size Visit us online at Kyocerarecisionools.com

5 ODU INU Solid ars oring pplication Solid ars Shank ype ax. Overhang ength /D in. ore Dia. Ø (mm) oolholder / Sleeve ef. age Z- Solid Z ar 14 /D=~5 Þ Þ Þ Þ Þ Þ Z-S Solid Z ar 15 /D=~5 Þ Þ Þ Þ Þ Þ Þ Þ Þ Z-N Solid Z ar 16 /D=~5 Þ Þ Þ Þ Þ Þ Þ Þ Þ Z-N D Solid Z ar Diamond 16 /D=~5 Þ Þ Þ Þ Þ Solid Double-Sided icro-ars 28 /D=~5 Þ Þ Þ Þ Þ Þ VN-S Swiss IQ ars Solid Þ Þ Þ Þ Þ 30 VN Swiss IQ ars Solid Þ Þ Þ Þ Þ Þ 30 VNX-S 20~ 25 24~ 25 32, 33 Swiss IQ ars Solid Þ Þ Þ Þ Þ Þ W win ars Solid Þ Þ Þ Þ Þ 36 pplication DS INSS N & D UNIN Internal rofiling ack oring 36 W win ars Solid Þ Þ Þ Þ Þ Double-Sided icro-ars 28 VN Double-Sided icro-ars ZV Z ar Solid /D=~5 Þ Þ Solid Þ Þ Solid Þ Þ 24~ 25 32, 33 21~ 25 OOVIN U-O DIN SOID ND IS Usage lassification (Solid ar type: inimum utting Dia. 1mm) Z ar asy djustment & igh recision IIN S S 12 NI INDX SVN Square Shank Straight 32 win ars 36~37 S...SVN Standard ound Shank Swiss IQ ars 33 SVNS Visit us online at Kyocerarecisionools.com 5

6 ODU INU Dynamic ar (inch) DS pplication Overview oring ar ype Shank ype ax. Overhang ength /D oolant ole in. ore Dia. Ø (in) Yes No oolholder / Sleeve ef. age INSS S-...S- xcellent /D=~5.5 arbide /D=~7.0 Þ Þ Þ Þ Þ (0.600) Þ (0.600) 38 N & D oring / Internal acing S- S()- xcellent /D=~5.5 xcellent /D=~5.5 Þ Þ Þ Þ Þ 40 Þ Þ Þ Þ Þ UNIN S S- xcellent /D=~5.5 Þ 52...SWU()- xcellent /D=~5.5 Þ Þ (0.472) Þ OOVIN oring S...SWU- xcellent /D=~5.5 Þ Þ 64 U-O...SDU- xcellent /D=~5.5 Þ Þ Þ 44 DIN...SDU- arbide /D=~7.0 Þ Þ Þ SOID ND IS...SDQ- xcellent /D=~5.5 Þ Þ Þ 46 IIN opying S S SV()- xcellent /D=~5.5 Þ Þ 60 NI...SVU()- xcellent /D=~5.5 Þ Þ INDX 62 ack oring...svz()- xcellent /D=~5.5 Þ Þ in. ore Dia. Ø is indicated by the figure under depending on the boring bar size Visit us online at Kyocerarecisionools.com

7 ODU INU Dynamic ar (metric) pplication Overview oring ar ype Shank ype ax. Overhang ength /D oolant ole in. ore Dia. Ø (mm) Yes No oolholder / Sleeve ef. age DS S- xcellent /D=~5.5 Þ Þ Þ Þ Þ S S- xcellent /D=~5.5 Þ Þ Þ Þ INSS S S- S- /D=~4.0 Þ Þ Þ Þ arbide /D=~7.0 Þ Þ Þ Þ 38 N & D S- arbide /D=~7.0 Þ Þ Þ Þ Þ UNIN S- xcellent /D=~5.5 Þ Þ Þ Þ Þ S S- /D=~4.0 Þ Þ Þ Þ 40 oring / Internal acing Z ar US S- S...S-Z...S-Z arbide /D=~7.0 Þ Þ Þ Þ /D=~3.0 arbide /D=~ OOVIN U-O S- arbide /D=~7.0 S- Þ Þ Þ Þ Þ Þ DIN S- xcellent /D=~5.5 S S- Þ Þ Þ Þ Þ Þ 52 SOID ND IS S S()- /D=~4.0 Þ Þ Þ Þ Þ IIN S- S S- xcellent /D=~5.5 Þ Þ Þ Þ Þ /D=~4.0 Þ Þ Þ Þ 51 S S S SWU()- /D=~4.0 Þ Þ Þ Þ Þ Þ Þ NI S SWU- xcellent /D=~5.5 Þ Þ Þ oring SWU()- xcellent /D=~5.5 Þ Þ Þ Þ Þ 64 INDX SWU- arbide /D=~7.0 Þ Þ Þ SWU()- arbide /D=~7.0 Þ Þ Þ Þ Þ Visit us online at Kyocerarecisionools.com 7

8 ODU INU Dynamic ar (metric) DS pplication Overview oring ar ype Shank ype ax. Overhang ength /D oolant ole in. ore Dia. Ø (mm) Yes No oolholder / Sleeve ef. age SDU- xcellent /D=~5.5 Þ Þ Þ Þ Þ INSS S SDU- /D=~4.0 Þ Þ Þ Þ 44 N & D SDU- SDQ- arbide /D=~7.0 Þ Þ Þ Þ Þ xcellent /D=~5.5 Þ Þ Þ Þ UNIN S SDQ- /D=~4.0 Þ Þ Þ 46 SDQ- arbide /D=~7.0 Þ Þ Þ Þ SV- Þ Þ Þ OOVIN opying xcellent /D=~5.5 SV- Þ Þ S SV- Þ Þ 58 U-O /D=~4.0 S SV- Þ DIN SV()- xcellent /D=~5.5 Þ Þ Þ Þ SOID ND IS S SV()- SV()- /D=~4.0 Þ Þ Þ arbide /D=~7.0 Þ Þ Þ Þ 60 IIN SVU()- xcellent /D=~5.5 Þ Þ Þ S S S SVU()- SVU()- /D=~4.0 Þ Þ arbide /D=~7.0 Þ Þ 62 NI SDZ- S SDZ- xcellent /D=~5.5 Þ Þ Þ Þ Þ /D=~4.0 Þ Þ Þ Þ 47 INDX ack opying SDZ- arbide /D=~7.0 Þ Þ Þ Þ Þ SVZ()- S SVZ()- xcellent /D=~5.5 Þ Þ Þ /D=~4.0 Þ Þ Visit us online at Kyocerarecisionools.com

9 ODU INU oring ar for eneral urpose pplication Overview oring ar ype Shank ype ax. Overhang ength /D oolant ole in. ore Dia. Ø (in) Yes No oolholder / Sleeve ef. age DS S...SU() /D=~3.0 Þ Þ (0.392) Þ Þ 54 oring S...U...SWU S...SWU /D=~3.0 arbide /D=~7.0 /D=~3.0 Þ (0.625) 55 Þ Þ 66 Þ Þ 67 INSS N & D S...S() /D=~3.0 Þ Þ Þ Þ UNIN oring / Internal acing...s...s()...s /D=~3.0 arbide /D=~3.0 Þ Þ Þ Þ Þ (0.197) arbide /D=~7.0 Þ (5.5mm) Þ Þ Þ Þ OOVIN opying...sx() S...SW S...SDU arbide /D=~7.0 Þ (7.5mm) /D=~3.0 /D=~3.0 Þ (9mm) Þ (11mm) Þ (0.476) Þ Þ 48 U-O DIN ack oring S...SDZ...SZ /D=~3.0 arbide /D=~7.0 Þ (6.5mm) Þ (0.596) Þ SOID ND IS...SZ arbide /D=~7.0 Þ (8.5mm) 56 IIN S S NI INDX in. ore Dia. Ø is indicated by the figure under depending on the boring bar size Visit us online at Kyocerarecisionools.com 9

10 IS O ODUIVIY IOVN DS oring xample xample of utting ime eduction xample of onventional utting INSS N & D UNIN OOVIN U-O DIN SOID ND IS oring xample xample of utting ime eduction IIN S S NI INDX Visit us online at Kyocerarecisionools.com

11 IS O ODUIVIY IOVN ow to Select round hipbreakers (for Internal inishing in utomatic athes) hoose a ground insert with an appropriate hand, in order to evacuate chips to the outside of the workpiece. eneral ombinations ombination for chip evacuation toward the exit of hole oring ar ight-hand () oring ar ight-hand () Insert eft-hand () Insert ight-hand () DS INSS N & D UNIN oring ar ight-hand () oring ar ight-hand () Insert eft-hand () Insert ight-hand () OOVIN U-O oolholder ttachment to educe hattering Normal ounting ad ttachment DIN SOID ND IS IIN When clamping rigidity is low, chattering tends to occur. ighten the toolholder firmly with at least two clamp bolts. If the entrance of the sleeve is deformed or loosened, actual overhang length becomes longer and chattering can occur everse ounting When the supporting point lies on the front of the clamp bolt, the actual overhang length becomes longer and it can cause chattering. he edge height can also be changed. S S NI INDX ighten the clamp bolts from the insert mounting side dge height can be affected by which side the clamping bolts are tightened from Visit us online at Kyocerarecisionools.com 11

12 Z SION UID DS Z ar Kyocera s Original Z djust Structure asy djustment / igh recision INSS asy adjustment and high precision Z ar minimizes deviation with high rigidity clamping N & D O 1225 for Stable utting and xtended ool ife UNIN ow to Select ars for high precision and S for cost reduction (olerances are different.) recision-oriented S ost-oriented OOVIN U-O Insert olerance Offset ongitudinal direction utting edge height in. ore Dia. recision-oriented ±0.025mm ±0.05mm +0.05mm/0mm Same as Shank Dia. DIN S ost-oriented ±0.060mm ±0.10mm +0.06mm/0mm Not same as shank dia. * See "Dimensions" page for details. SOID ND IS IIN ow to Select Sleeves New indexable boring bar added Z ar lus S S NI with coolant hole with Z adjust structure S for cost oriented cutting INDX and can adjust overhang length by Z adjust structure Z- sleeve Z- sleeve Z-S sleeve Visit us online at Kyocerarecisionools.com

13 Z SION / IION UID ow to Select ars and Sleeves for ach pplication ype ar + / ype Sleeve igh recision equired asy Overhang djustment equired ositioning Not equired ost eduction equired xcellent repeatability and drastic tool change time reduction DS Internal oolant ocus on recision ocus on ost INSS ype ar + ype Sleeve ype ar + ype Sleeve S ype ar + ype Sleeve Z ar lus + ype Sleeve S ype ar + S ype Sleeve N & D Z- (igh precision with coolant hole) Now added in the Z sleeve ineup! Kyocera's unique Z adjust structure and internal coolant system improve dimensional accuracy and surface roughness! UNIN Z- pplicable Sleeve Z- Internal Stucture OOVIN oolant oolant U-O oolant ole oolant ole DIN ow to Set ar in Sleeve ow to use adjustment pin and prevent coolant leakage (ig.1) ut the adjustment pin into the hole according to the overhang length and push it into the sleeve using the wrench "W-1.5". ighten the clamp screw for the adjustment pin "S3x4" using the wrench "W-1.5" from both sides of the sleeve. ut the additional clamp screws "S3x4" into the un-used adjustment pin holes to prevent coolant leakage using the wrench "W-1.5" and fix them from both sides of the sleeve. ow to secure the bar (ig.2) With the chip pocket upward, set the bar into the sleeve. ress the slant face of the bar end with the adjustment pin. ake sure that the bar does not rotate. (ig.3) ighten the clamp screw with wrench "W-2" and secure the bar. (Use "W-1.5" if shank dia. is 3mm or less.) SOID ND IS IIN S S NI INDX ig.1 ow to use the adjustment pin ig.2 ow to secure the bar ig.3 lamped bar Visit us online at Kyocerarecisionools.com 13

14 NW IS! Z Z- (oring) igh recision DS INSS N & D INDX NI S S IIN SOID ND IS DIN U-O OOVIN UNIN Z ar Dimensions (metric) art Number Z ar Identification System in. ore Dia. Dimensions (mm) O rade arbide Ø ØD S r 1225 W05 pplicable Sleeve 20~ 25 Z ±0.015 Þ Z ±0.015 Þ ±0.02 Þ ±0.015 Þ ±0.02 Þ ±0.015 Þ ±0.02 Þ ±0.015 Þ ±0.02 Þ ±0.015 Þ ±0.02 Þ ±0.015 Þ ±0.02 Þ Z025 Z030 Z035 Z040 Z050 Z060 Z ±0.01 Þ Z ±0.01 Þ ±0.02 Þ ±0.01 Þ ±0.02 Þ ±0.01 Þ ±0.02 Þ ±0.01 Þ ±0.02 Þ ±0.01 Þ ±0.02 Þ ±0.01 Þ ±0.02 Þ olerance: Offset ±0.025mm (of the reference pin), overall length ±0.05mm, edge height +0.05/0mm Z Symbol of ar pplication : -oring ar and : ight-hand Z in. ore Dia. 020 : 2.0mm 025 : 2.5mm Shank Dia. 020 : 2.0mm 025 : 2.5mm recision : igh recision S: Standard orner- (r) 008 : 0.08mm 015 : 0.15mm Z025 Z030 Z035 Z040 Z050 Z060 ecommended utting onditions 17 hipbreaker : hipbreaker (without lead angle) : hipbreaker (with lead angle) N: Without chipbreaker Z ars are sold in 1 piece boxes. 14 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

15 Z Z-S (oring) ost eduction DS INSS N & D Z ar Dimensions (metric) art Number in. ore Dia. Dimensions (mm) rade O Ø ØD S r 1225 pplicable Sleeve 20~ 25 Z S ±0.015 Þ Z S ±0.015 Þ S ±0.02 Þ S ±0.015 Þ S ±0.02 Þ S ±0.015 Þ S ±0.02 Þ S ±0.015 Þ S ±0.02 Þ S ±0.015 Þ S ±0.02 Þ S ±0.015 Þ S ±0.02 Þ S ±0.015 Þ S ±0.02 Þ S ±0.015 Þ S ±0.02 Þ Z020 Z025 Z030 Z035 Z040 Z050 Z060 Z070 Z S ±0.01 Þ Z S ±0.01 Þ S ±0.02 Þ S ±0.01 Þ S ±0.02 Þ S ±0.01 Þ S ±0.02 Þ S ±0.01 Þ S ±0.02 Þ S ±0.01 Þ S ±0.02 Þ S ±0.01 Þ S ±0.02 Þ S ±0.01 Þ S ±0.02 Þ S ±0.01 Þ S ±0.02 Þ olerance: Offset ±0.06mm (of the reference pin), overall length ±0.1mm, edge height +0.06/0mm Z020 Z025 Z030 Z035 Z040 Z050 Z060 Z070 ecommended utting onditions 17 UNIN OOVIN U-O DIN SOID ND IS IIN S S NI INDX Z ars are sold in 1 piece boxes. Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 15

16 Z Z-N (oring) Without hipbreaker DS INSS N & D NI S S IIN SOID ND IS DIN U-O OOVIN UNIN Z ar Dimensions (metric) art Number in. ore Dia. Dimensions (mm) Ø ØD S r Z N rade O N D 1225 KN05 KD001 pplicable Sleeve 20~ 25 ig.1 Z N ig.1 Z N ig.1 Z N ig.1 Z N ±0.015 ig.1 Z N ig.1 Z N ig.1 Z N ig.1 Z N ig.1 Z070 Z N ig.2 Z N ig.3 Z N ±0.015 ig.3 Z N ig.3 Z N ig.3 Z070 Z N ig.3 Z N ig.3 Z N ±0.015 ig.3 Z N ig.3 Z070 dge reparation rade dge reparation emarks 1225 Sharp dge - KN mm 15 hamfered utting dge KD001 Sharp dge - ecommended utting onditions 17 INDX Z ars are sold in 1 piece boxes. 16 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

17 Z ecommended utting onditions hipbreaker (Z-... ype Workpiece aterial Z-S... ype) Insert rade (Vc:sfm) Z020/025 Z030/035 Z040/045 O arbide Depth of ut: D.O..(in), eed: f(ipr) Z050/055/ 060/065/075 emarks DS arbon / lloy (1045) 1225 W05 D.O.. f D.O.. f D.O.. f D.O.. f 100~325 - ~ ~ ~ ~ ~ ~ ~ ~ INSS Stainless (304) 100~250 - ~ ~ ~ ~ ~ ~ ~ ~ Non-ferrous aterial - ~325 ~ ~ ~ ~ ~ ~ ~ ~ Wet N & D hipbreaker (Z-... ype Z-S... ype) Workpiece aterial arbon / lloy (1045) Insert rade (Vc:sfm) Z020/025 Z030/035 Z040/045 O Depth of ut: D.O..(in), eed: f(ipr) Z050/055/ 060/065/ D.O.. f D.O.. f D.O.. f D.O.. f 100~325 ~ ~ ~ ~ ~ ~ ~ ~ Stainless 100~250 ~ ~ ~ ~ ~ ~ ~ ~ emarks Wet UNIN N hipbreaker (Without hipbreaker) OOVIN Workpiece aterial Insert rade (Vc:sfm) Z020/025 Z030/035 Z040/045 Z055/065/075 O Depth of ut: D.O..(in), eed: f(ipr) 1225 D.O.. f D.O.. f D.O.. f D.O.. f emarks U-O arbon / lloy 100~325 ~ ~ ~ ~ ~ ~ ~ ~ Stainless 100~250 ~ ~ ~ ~ ~ ~ ~ ~ Wet DIN Non-ferrous aterial 200~325 ~ ~ ~ ~ ~ ~ ~ ~ Workpiece aterial Z ar ompatibility Insert rade (Vc:sfm) Z030 Z040/045 Z050/060/070 O Diamond Depth of ut: D.O..(in), eed: f(ipr) KN05 KD001 D.O.. f D.O.. f D.O.. f Non-ferrous aterial - ~ ~ ~ ~ ~ ard aterials (including heat-treated steel) ~325 - ~ ~ ~ ~ ~ ~ emarks Wet SOID ND IS IIN S S Z ar is compatible with conventional icro-ars ar Sleeve Z... Z...S/N...(onventional) Z.../ Z...S S...(onventional) 1 (ompatible) 1 Some diameters of conventional icro-ars are incompatible 2 Use them without djustment ins. Overhang length of bar is not adjustable. 1 (ompatible) 1 2 (ompatible) 1 (ompatible) NI INDX Visit us online at Kyocerarecisionools.com 17

18 NW IS! Z - US S-S-Z ype aximum overhand length - /D = ~3 DS INSS N & D ight-hand shown eft-hand insert for ight-hand toolholder -S-Z ype aximum overhand length - /D = ~5 UNIN S S IIN SOID ND IS DIN U-O OOVIN oolholder Dimensions pplicable Inserts oolholder art Number pplication inute D.O.. inishing inishing / recision Non-ferrous etals ard aterial ef. age Stock () ight-hand shown in. ore Dia. Dimensions (mm) Ø ØD S D N...S W S W W Std. oolant orner- Drawing ole (r) Spare arts lamp Screw Wrench pplicable Sleeve 20~ 25 S045X-S03-050Z Þ No ig.1 S Z045 S060X-S04-070Z Þ No ig.2 S-2035 Z X-S03-050Z Þ No ig.3 S-1635 Z045 arbide 060X-S04-070Z Þ No ig.4 S-2035 Z060 ecommended utting onditions 63~ 64 eft-hand insert for ight-hand toolholder NI INDX 18 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

19 Z (OYIN / OIIN) NW IS! ZV ype (oring / Internal acing / Internal rofiling) DS INSS oolholder Dimensions art Number ight-hand shown in. ore Dia. Dimensions (mm) rade O Ø ØD S r 1225 ZV pplicable Sleeve 20~ ±0.015 Þ Z Þ Z050 Þ Z Þ Z060 ecommended utting onditions N & D UNIN OOVIN Workpiece aterial arbon / lloy (1045) Insert rade (Vc:sfm) Z020/025 Z030/035 Z040/045 O Depth of ut: D.O..(in), eed: f(ipr) 1225 D.O.. f D.O.. f D.O.. f 100~330 ~ ~ ~ ~ ~ ~ Stainless 100~260 ~ ~ ~ ~ ~ ~ emarks Wet U-O DIN ZV ype (oring / Internal acing / Internal rofiling) Stable achining with etter hip ontrol SOID ND IS Spherical Internal rofiling IIN ZV f ipr ipr ipr D.O.. ompetitor f ipr ipr ipr D.O.. S S " " NI " " oor chip control INDX " Vc = 330sfm Workpiece: Stainless (Wet) " oor chip control Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 19

20 NW IS! Z Z- (pplicable Sleeve) With coolant hole and Z adjust structure DS INSS N & D SOID ND IS DIN U-O OOVIN UNIN art Number Stock Dimensions (mm) Ød1 ØD1 ØD2 Ød Z Þ " Þ " Z Þ " Þ " Z Þ " Þ " : 4 shows Ød1 length 2: Dimension shows overhang length of the Z ar when attached to sleeve. Dimensions in ( ) show overhand length of Z ar US. 3: type bars are not adjustable. hoose sleeves (Ød1) to meet with ØD dimension of bar. Spare arts (for Z- Sleeves) (mm) Overhang ength of ar 2 djustment in Setting No1 No2 No3 No4 Drawing pplicable Z ar 14~ ig.1 Z ig ig.1 Z Z Z NI S S IIN art Number Z Z Spare arts lamp Screw Wrench lamp Screw Wrench djustment in S3x4 (for adjustment pin,coolant leak prevention and bar) S3x4 (for adjustment pin, coolant leak prevention and bar) W-1.5 1N m ightening orque W-1.5 1N m ightening orque S4x4 (for bar) W-2 2N m ightening orque Z ar or Z ar djustment 2.0mm lamp Screw S4x4 Wrench W-2 or diameters under Ø3, use W-1.5 and S3x4 (Same part of adjustment pin) Sleeve INDX ) If shank dia. is Ø2.5mm or less, use 6 clamp screws (S3x4), distributed as follows: or adjustment pin...2 pcs or coolant leak prevention...2 pcs or bar...2 pcs 2) If shank dia. is Ø3.0mm, use 9 clamp screws (S3x4), distributed as follows: or adjustment pin...2 pcs or coolant leak prevention...4 pcs or bar...3 pcs or adjustment pin clamping or coolant leak prevention 1.5mm lamp Screw S3x4 Wrench W-1.5 djustment in ole djustment in hangeable overhang length 20 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

21 Z NW IS! Z- (pplicable Sleeve) With coolant hole and Z adjust structure DS INSS N & D art Number Stock Dimensions (mm) Ød1 ØD1 ØD2 Ød Z Þ " Þ " Z Þ " Þ " Z Þ " Þ " Z Þ " Þ " Z Þ " Þ " Z Þ " Þ " : 4 shows Ød1 length 2: Dimension shows overhang length of the Z ar when attached to sleeve. Dimensions in ( ) show overhand length of Z ar US. 3: type bars are not adjustable. hoose sleeves (Ød1) to meet with ØD dimension of bar (mm) Overhang ength of ar 2 djustment in Setting No1 No2 No3 No4 Drawing ig ig ig ig ig ig.3 pplicable Z ar or Z ar US 14~ 16 18, 19, 28 34, Z ZV Z Z Z Z Z ZV Z Z Z Z ZV Z Z Z Z ZV Z Z _060X Z Z Z Z Z UNIN OOVIN U-O DIN SOID ND IS IIN S S NI INDX Z ar ounting rocedure 23 Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 21

22 Z Z- (pplicable Sleeve) djustable DS INSS NI S S IIN SOID ND IS DIN U-O OOVIN UNIN N & D art Number Stock Dimensions (mm) Ød1 ØD1 ØD2 Ød (mm) Overhang ength of ar 2 djustment in Setting No1 No2 No3 No4 Drawing pplicable Z ar or Z ar US 14~ 16 19, 28 34, Z Þ " ig.1 Z Þ " Z Þ " Z ig Þ " Z Þ " Z ig Z Þ " Z Z 030 Þ " ZV ig.2 Z Z Þ " Z Þ " Z ig Z Þ " Z Z Þ ZV Z ig.4 (23) Z Z Þ : 4 shows Ød1 length 2: Dimension shows overhang length of the Z ar when attached to sleeve. Dimensions in ( ) show overhand length of Z ar US. 3: type bars are not adjustable. hoose sleeves (Ød1) to meet with ØD dimension of bar. Spare arts (for Z- Sleeves) art Number Spare arts lamp Screw Wrench lamp Screw Wrench djustment in pplicable Z ar INDX Z Z Z W S3x4 Z Z N m (for adjustment pin and bar) Z Z ightening orque Z Z Z Z W-1.5 W-2 Z Z 040 S3x4 S4x Z Z 050 1N m 2N m (only for adjustment pin) (for bar) ightening orque ightening orque Z Z Z (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

23 Z Z- (pplicable Sleeve) djustable DS INSS art Number Stock Dimensions (mm) Ød1 ØD1 ØD2 Ød (mm) Overhang ength of ar 2 Z ig Þ " ( 14 ) ( 9.5 ) ( - ) ( - ) ig Þ " Z ig Þ " ig Þ " Z ig Þ " ig Þ " Z ig Þ " ig Þ " : 4 shows Ød1 length 2: Dimension shows overhang length of the Z ar when attached to sleeve. Dimensions in ( ) show overhand length of Z ar US. 3: type bars are not adjustable. hoose sleeves (Ød1) to meet with ØD dimension of bar. Z ar Identification System 4 djustment in Setting No1 No2 No3 No4 Z Drawing pplicable Z ar or Z ar US 14~ 16 18, 19, 28 35, _045X- 050Z Z 050 ZV Z 050- Z 050- Z Z 060 ZV Z 060- Z 060- _060X- -070Z Z 070 Z 070- Z 070- Z N & D UNIN OOVIN U-O DIN SOID ND IS IIN Z Symbol of ar Z ar ounting rocedure pplication -Sleeve Shank Dia. of Z ar 017 : 1.7mm 025 : 2.5mm Sleeve Shank Dia. 16 : 16.00mm 25.4 : 25.40mm Symbol of recision : igh recision with oolant ole : S: recision Standard Overall ength of Sleeve 100 : 100mm 120 : 120mm S S NI ow to use adjustment pin (ig.1) ut the adjustment pin into the hole. ush it into the sleeve, using the wrench W-1.5. ighten the clamp screw S3x4p with wrench W-1.5 to fix the adjustment screw. ow to secure bar (ig.2) INDX With the chip pocket upward, set the bar in sleeve. ress the slant of the end of the bar against the adjustment pin. ake sure that the bar does not rotate. (ig.3) ighten the clamp screw with wrench W-2 and secure the bar. (Use W-1.5 if shank dia. is 3mm or less.) Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 23

24 Z Z-S (pplicable Sleeve) NO djustable DS INSS INDX NI S S IIN SOID ND IS DIN U-O OOVIN UNIN N & D art Number Stock Dimensions (mm) Ød1 ØD1 ØD2 ØD3 Ød Z 01712S S S " S S S S " Z 02012S S S " S S S S " Z 02512S S S " S S S S " Z 03012S S S " S S S S " Z 03512S S S " S S S S " Z 04012S S S " S S S S " :5 shows Ød1 length hoose sleeves (Ød1) to meet with ØD dimension of bar. djustment pin cannot be installed in Z-S sleeves. o adjust overhang of Z insert, please use Z- or Z- sleeves Drawing ig ig.2 16 ig ig.2 16 ig ig.2 16 ig ig.2 16 ig ig.2 16 ig ig.2 pplicable Z ar or Z ar US 14~ 16 19, 28 34, Z 017 Z Z 025 Z 025- Z 030 ZV Z 030- Z Z 035 Z 035- Z 040 ZV Z 040- Z Z (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

25 Z Z-S (pplicable Sleeve) NO djustable DS INSS art Number Stock Dimensions (mm) Ød1 ØD1 ØD2 ØD3 Ød Z 05012S ig s ig S " S S S S " Drawing 18 9 ig.2 (24) Z 06012S ig s ig S " S S S ig.2 (24) pplicable Z ar or Z ar US 14~ 16 18, 19, 28 34, Z 050 ZV Z 050- Z 050- Z Z 060 ZV Z 060- Z 060- _060X Z N & D UNIN OOVIN U-O S " Z 07012S ig s ig S " S S S S " :5 shows Ød1 length hoose sleeves (Ød1) to meet with ØD dimension of bar. djustment pin cannot be installed in Z-S sleeves. o adjust overhang of Z insert, please use Z- or Z- sleeves ig.2 (24) Z 070 Z 070- Z 070- Z DIN SOID ND IS IIN Spare arts (for Z-S Sleeves) Z Z art Number Screw Spare arts pplicable Z ar Z ar US Z ar US 2-dge ip ars Wrench Z- ype Z-S ype Z-N ype Z ype Z ype Z ype Z ype Z ype Z ype ype S-.. Z S-.. W-1.5 Z S-.. S3 4 1N m ightening orque Z Z S-.. Z Z_ S-.. Z Z S-.. W-2 Z Z_ S-.. S4 4 2N m Z Z_ ightening orque S-.. Z Z_ _060X Z S-.. Z Z_ S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 25

26 DS Z Z ar Operability asy djustability of ar educes reparation ime! INSS Z ar Spare arts Z djust Structure N & D Screw for djustment in ar nd (Slant) djustment in UNIN Screw for ar djustment in ntry oint Overhang ength djustment in is eplaceable OOVIN ow to ttach djustment in ow to lamp ar S1 S2 S3 S4 U-O Screw for djustment in DIN djustment in SOID ND IS Insert the djustment in into the ole. it the djustment in with Screw Sharp cutting edge of the bars may cause injury. e careful when handling them. ress the Slant nd of the ar with the djustment in it the ar with ar Screw IIN S S NI INDX Visit us online at Kyocerarecisionools.com

27 Z ase Studies Valve art Vc=250sfm D.O..=0.004" f=0.0012ipr Wet Z (1225) Z SS onnector Vc=150~200sfm D.O..=0.004" f=0.0012ipr Wet Z045040S-008 (1225) Z SS DS INSS ,000 pcs/edge ,000 pcs/edge N & D ompetitor 2,000 pcs/edge ompetitor 500 pcs/edge UNIN ompared to ompetitor, Z ar showed 1.5 times longer tool life with superior stability and accuracy of cutting edge position. ompared to ompetitor, Z ar showed 4 times longer tool life. djustable overhang length of sleeves (Z-) drastically improved operability. (User valuation) (User valuation) Sleeve (utomotive art) Vc=150sfm D.O..=0.002" f=0.0024ipr Wet Z045040S-008 Z (1225) ollar Vc=275sfm D.O..=0.002"~0.004" f=0.001ipr Wet Z Z (1225) OOVIN U-O ,000 pcs/edge ,000 pcs/edge (Stable achining) DIN ompetitor 1,000 pcs/edge ompared to ompetitor, Z ar doubled tool life. he excellent operability of the sleeve reduced the cycle time and improved productivity. ompetitor I 10,000 pcs/edge (Unstable) ompared to ompetitor I, Z ar achieved stable machining of 10,000 pcs/edge, minimizing deflection of the diameter. Number of defects is reduced drastically. SOID ND IS (User valuation) (User valuation) SS IIN Sleeve Vc=100sfm D.O..=0.002" (2 passes) f=0.0012ipr Wet Z045040S-008 (1225) Z ipe Vc=125sfm D.O..=0.009" f=0.0012ipr Wet Z (1225) Z S S NI pcs/edge (urther achining ossible) ,500 pcs/edge (No Defective roducts) INDX ompetitor 150 pcs/edge onventional K 1,500 pcs/edge (Unstable) 1225 has double the tool life of that of ompetitor with good chip control. (User valuation) onventional K was unstable in tool life and dimension. Z ar had stable machining. (User valuation) Visit us online at Kyocerarecisionools.com 27

28 DOU-SIDD IO S [ / ] (oring) DS N ype (Without hipbreaker) INSS N & D (ack oring) ight-hand shown UNIN INDX NI S S IIN SOID ND IS DIN U-O OOVIN icro-ar Dimensions art Number in. ore Dia. Dimensions (mm) Ø ØD S r Insert rade VD oated arbide 930 KW N N N N N N pplicable Sleeves Workpiece aterial arbon / lloy Stainless icro ars ight-hand shown Insert rade (Vc:sfm) 02 ype 03 ype VD oated arbide 04 ype 04 ype Depth of ut: D.O..(in), eed: f(ipr) 05/06/07 ype 05 ype 930 KW10 D.O.. f D.O.. f D.O.. f D.O.. f 100~ ~270 Non-ferrous aterial - Sleeves 20~ Z Z ecommended utting onditions - ~0.012 ~ ~0.016 ~ ~0.018 ~ ~0.020 ~ ~0.012 ~ ~0.016 ~ ~0.018 ~ ~0.020 ~ ~330 ~0.012 ~ ~0.016 ~ ~0.018 ~ ~0.020 ~ emarks Wet : 1st ecommendation : 2nd ecommendation icro ars sold in 10 piece boxes. 28 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

29 IO [S-S / S-S] DUS OVN N S-S (Internal oring) NO: S-S bars will be phased out and replaced with Z type bars. See 14 pplicable Sleeves 20~ 25 S 0202 ype S 0303 ype Shown on left DS NS ype (Without hipbreaker) INSS ermet, oated arbide N, Diamond N & D ight-hand shown S-S (ack oring) NO: S-S bars will be phased out and replaced with type bars. See 28 UNIN pplicable Sleeves 20~ 25 OOVIN ight-hand shown icro-ar Dimensions art Number in. ore Dia. Dimensions (mm) Ø ØD S r S S S Å S Å S Å S Å S Å S NS Insert rade VD oated arbide N D NS Ç Ç Ç Ç NS Ç Ç Ç Ç Ç Ç NS Ç Ç Ç Ç Ç NS Ç Ç Ç Ç Ç Ç NS Ç Ç Ç Ç Ç Ç S S S ecommended utting onditions Workpiece aterial Insert rade (Vc:sfm) VD oated arbide N D 915 arbon / lloy - Stainless ~ ~270 Non-errous aterial - - KW10 KN510 KN525 KD001 KD010 SO2 S Ç KW10 Ç S04 S04 Depth of ut: D.O..(in), eed: f(ipr) KN510 KN525 KD001 S05 S06 S07 S05 D.O.. f D.O.. f D.O.. f D.O.. f ~0.012 ~0.001 ~0.016 ~0.002 ~0.018 ~0.003 ~0.020 ~ ~0.012 ~0.001 ~0.016 ~0.001 ~0.018 ~0.002 ~0.020 ~0.003 ~330 ardened aterial ~330 ~990 ~990 ~0.012 ~0.002 ~0.016 ~0.002 ~0.018 ~0.004 ~0.020 ~ ~0.003 ~0.001 ~0.004 ~0.002 ~0.006 ~0.003 KD010 emarks Wet : 1st ecommendation : 2nd ecommendation icro ars sold in 10 piece boxes. U-O DIN SOID ND IS IIN S S NI INDX Þ : U.S. Stock Å : U.S. Stock (-hand Only) Ä : U.S. Stock (-hand Only) : World xpress (Shipping: 7-10 usiness Days) Ç : World xpress (-hand Only) Æ : World xpress (-hand Only) 29

30 NW IS! SWISS IQ O IO VN-S (oring) [orner-(r) olerance: +0 / mm] DS INSS ight-hand shown N & D VN (oring) -N ype (Without hipbreaker) op rades UNIN ermet oated arbide D ight-hand shown VN (ack oring) OOVIN U-O Insert Dimensions (VN-S) ight-hand shown INDX NI S S IIN SOID ND IS DIN art Number in.ore Dia. Dimensions (mm) Ø S r VN S S S S S S S S S S VN S S S S S S S S VN S S ecommended utting onditions (VN-S) Workpiece aterial arbon / lloy (1045) Stainless (304) O ~ ~325 VD oated arbide ~ ~250 arbide N D KW10 KN510 KD001 KD010 VN01-S VN015-S O 1225 VD oated arbide 930 arbide KW10 VN02-S ~ VN04-S Depth of ut: D.O..(in), eed: f(ipr) D.O.. f D.O.. f ~0.004 ~ ~0.008 ~ ~0.004 ~ ~0.008 ~ KD001 D KD010 emarks Wet : 1st ecommendation : 2nd ecommendation Swiss IQ ars are sold in 5 piece boxes. 30 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

31 SWISS IQ O IO NW IS! Insert Dimensions (VN / VN-N / VN) in. ore Dia. art Number Workpiece aterial arbon / lloy (1045) Stainless (304) Non-ferrous etals (luminum / rass) O ~ ~325 VD oated arbide ~ ~325 arbide N D KW10 100~ ~ KN510 KD001 KD010 VN02 VN03 VN04 VN04 Depth of ut: D.O..(in), eed: f(ipr) VN05 VN06 VN07 VN05 D.O.. f D.O.. f D.O.. f D.O.. f ~0.012 ~ ~0.016 ~ ~0.018 ~ ~0.020 ~ ~0.012 ~ ~0.016 ~ ~0.018 ~ ~0.020 ~ ~325 Dimensions (mm) Ø 1 2 S r ~975 ~975 O VD oated arbide VN Þ Þ Þ Þ Þ Þ Þ Þ Þ Þ Þ Þ Þ Þ VN VN Þ Þ VN N N N N N N N N N N VN N N N N N N N N N N VN VN ecommended utting onditions (VN / VN-N / VN) 1225 ~0.012 ~ ~0.016 ~ ~0.018 ~ ~0.020 ~ Swiss IQ ars are sold in 5 piece boxes. 930 arbide KW10 KD001 D KD010 emarks Wet : 1st ecommendation : 2nd ecommendation D Inserts are sold in 1 piece boxes. DS INSS N & D UNIN OOVIN U-O DIN SOID ND IS IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 31

32 SWISS IQ O IO SVN-N (Without Side Stopper) SVNS-N (Without Side Stopper / Without lamp Screw) DS NI S S IIN SOID ND IS DIN U-O OOVIN UNIN N & D INSS ight-hand shown oolholder Dimensions art Number Dimensions (mm) Stock 1=h SVN N ig K-12N ig K-12N ig K-12N ig N ig.1 ight-hand Insert for ight-hand oolholder Spare arts pplicable Inserts lamp Screw Wrench Setscrew W S S3 4 30~ VN VN VN VN VN SVNS 1010K-12-06N ig.2 S-3080 W-10S - (VN ) 1010K-12-11N ig.2 S-3080 W-10S - (VN ) (VN ) (VN ) (VN ) N ig.2 S-3080 W-10S - (VN ) N ig.2 S-3080 W-10S N ig.2 S-3080 W-10S - (VN ) (VN ) (VN ) (VN ) (VN ) (VN ) (VN...-20) N ig.2 S-3080 W-10S - (VN ) N ig.2 S-3080 W-10S N ig.2 S-3080 W-10S - very type of insert is attachable for SVNS-N, however in case of setting insert top at the toolholder face level, please use above applicable ( ) insert. In this case, 3 dimension of toolholder and 2 dimension of insert will correspond. 1) SVN-N / S...SVN-N / S-SVN-SN oolholders (without side stopper) retain high index accuracy by easy restraint. Note 1 & Note 2 : See Insert Dimension able. ( 30~ 31) (VN ) (VN ) (VN ) (VN ) (VN ) (VN ) (VN...-20) 2) or high-rigidity clamping, (e.g. when varying load direction of undercutting, internal and external, or face cutting by one tool), changing the S3x4 screw to a S3x4 screw (sold separately) enables the toolholder's rigid clamping equivalent to the side stopper holders. Spare arts (Optional) Screw (Side Stopper) Wrench S3 4 W-1.5 INDX 32 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

33 SWISS IQ O IO S...SVN-N (Without Side Stopper : Standard) S...SVN-SN (Without Side Stopper : Straight) DS ight-hand shown oolholder Dimensions art Number S12-SVN12N Stock Unit Dimensions ØD1 ØD ig.1 S14-SVN12N mm ig.1 S16-SVN12N ig.1 S19-SVN12N Þ inch ig.1 S19N-SVN12N Þ ig.1 S20-SVN12N mm ig.1 S25-SVN12N Þ ig.1 S25Q-SVN12N Þ inch ig.1 S19-SVN12SN Þ ig.2 S20-SVN12SN ig.2 S22K-SVN12SN mm ig.2 S25.0-SVN12SN ig.2 uidance of ach older ype Selection ang-ype (orizontal) ang-ype ight-hand Insert for ight-hand oolholder Spare arts pplicable Inserts lamp Screw Wrench Set Screw S S3 4 S S3 4 ang-ype (ront oading Sleeve ype) Note 1 & Note 2 : See Insert Dimension able. ( 30~ 31) 30~ VN VN VN VN VN ang-ype (ack oading Sleeve ype) INSS N & D UNIN OOVIN U-O DIN SOID ND IS Square Shank (Straight) Square Shank (-) Square Shank Square Shank IIN ound Shank (Standard) ound Shank (Standard) ound Shank (Standard) S S NI ound Shank (Straight) ound Shank (Straight) ound Shank (Straight) INDX ecommended toolholder may change according to machines used and actual position. utomatic lathes have various toolpost types other than those above. Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 33

34 SWISS IQ O IO VNX-S (oring) [orner-(r) inus olerance] DS VNX0103 VNX0105 VNX01503 VNX01505 VNX03516 INSS ight-hand shown N & D UNIN Insert Dimensions (VNX-S) in.ore Dia. Dimensions (mm) art Number Ø S r Insert rade VD oated arbide 930 INDX NI S S IIN SOID ND IS DIN U-O OOVIN VNX S S S S S S S S S S VNX S S S S S S S S VNX S S ecommended utting onditions (VN-S) Workpiece aterial arbon / lloy (1045) Stainless (304) 630 VNX-S ttachment holder for VNX-S Swiss IQ ar 1. VNX-S ttachment holder for VNX-S Swiss IQ ar is below (See page 35). SVNS-XN (Without Side Stopper) S SVN-XN (Without Side Stopper) S SVN-SXN (Without Side Stopper) VD oated arbide arbide N D 2. bove holder assures high index accuracy by easy restraint ~ ~ holder which attaches setscrews (without side stopper) can be used as binding effect holder as with side stopper holder, once taking off the setscrew, and insert a screw (S3x4: sold separately) with wrench (W-1.5: sold separately). KW10 KN510 KD001 KD010 VNX01-S VNX015-S VNX02-S ~ VNX04-S Depth of ut: D.O..(in), eed: f(ipr) D.O.. f D.O.. f ~0.004 ~ ~0.008 ~ ~0.004 ~ ~0.008 ~ emarks Wet : 1st ecommendation : 2nd ecommendation Spare arts (Optional) Screw (Side Stopper) Wrench S3 4 W-1.5 Swiss IQ ars are sold in 5 piece boxes. 34 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

35 SWISS IQ O IO SVNS-XN (Square Shank: -shape) DS INSS ight-hand shown Note 1 dimension is same size as applicable insert (VNX) 2 dimension oolholder Dimensions ight-hand Insert for ight-hand oolholder N & D Dimensions (mm) Spare arts art Number Stock 1=h lamp Screw Wrench Setscrew pplicable Inserts 34 UNIN SVNS 1010K-12-06XN (VNX02..) 1010K-12-11XN (VNX..11..) XN (VNX02..) XN (VNX..11..) S-3080 W-10S S XN (VNX0420..) XN (VNX02..) XN (VNX..11..) XN (VNX0420..) ll Swiss IQ ar Inserts are used with an SVNS-XN oolholder, however, when setting the cutting edge at the face level of the toolholder as shown in ig., use the insert shown in ( ). S...SVN-XN (ound Shank: Standard) S...SVN-SXN (ound Shank: Straight) OOVIN U-O DIN SOID ND IS ight-hand shown ight-hand Insert for ight-hand oolholder 1. Note 1 dimension is same size as applicable insert (VNX) 2 dimension + 1mm 2. Note 2 dimension is same size as applicable insert (VNX) 2 dimension oolholder Dimensions (older center axis core and insert center are coaxial type) IIN art Number Stock Unit Dimensions ØD1 ØD2 1 2 Spare arts lamp Screw Wrench Setscrew pplicable Inserts 34 S S S12 -SVN12XN mm S14 -SVN12XN S15 -SVN12XN Þ inch S16 -SVN12XN mm S19 -SVN12XN Þ inch S S19N -SVN12XN Þ S20 -SVN12XN mm S3 4 VNX... S25 -SVN12XN Þ S25Q -SVN12XN Þ inch S19 -SVN12SXN Þ S20 -SVN12SXN S22K -SVN12SXN mm S S25.0 -SVN12SXN ll Swiss IQ ar Inserts are used with an SVNS-XN oolholder, however, when setting the cutting edge at the face level of the toolholder as shown in ig., use the insert shown in ( ). NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 35

36 WIN O IO DS INSS N & D W (icro oring: orizontal ype) [orner-(r) olerance: +0/-0.02mm, +0/-0.03mm] art Number in.ore Dia. Dimensions (mm) Ø S r Insert rade VD oated arbide arbide W W ight-hand shown KW10 UNIN SW (Square Shank for orizontal ype Inserts) (or left-hand toolholder for grooving, please see 48) OOVIN U-O DIN oolholder Dimensions art Number ight-hand shown Stock ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder Dimensions (mm) 1=h SW ig K ig K ig K ig ig.2 lamp Screw Spare arts Wrench pplicable Inserts S-3080 W-10S W- SOID ND IS S...-SW (ound Shank for orizontal ype) (or left-hand toolholder for grooving, please see 48) IIN S S NI INDX oolholder Dimensions art Number ight-hand shown Stock ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder Dimensions (mm) ØD1 ØD S12- SW ig.1 S14- SW ig.1 S15- SW ig.1 S16- SW ig.1 S19- SW ig.2 S19K- SW ig.2 S20- SW ig.2 S20K- SW ig.2 S22K- SW ig.2 S25.0- SW ig.2 S25K- SW ig.2 lamp Screw Spare arts Wrench pplicable Inserts S-3080 W-10S W- win ars are sold in 5 piece boxes. 36 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

37 WIN O IO [SOID Y] W (icro oring: Vertical ype) [orner-(r) olerance: +0/-0.02mm, +0/-0.03mm] art Number in.ore Dia. Dimensions (mm) Ø S r W Insert rade VD oated arbide arbide W ight-hand shown SWS (Square Shank for Vertical ype: -shape) 1025 KW10 DS INSS N & D UNIN ight-hand shown oolholder Dimensions Dimensions (mm) art Number Stock 1=h lamp Screw Spare arts Wrench pplicable Inserts bove & 49 OOVIN U-O SWS 1010X X X SWS S-3080 W-10S W- W DIN ecommended utting onditions (VN-S) Workpiece aterial arbon / lloy (1045) Stainless (304) ecommended rade (Vc sfm) VD oated arbide ~ ~250 W01003 W01503 W01003 W01503 W02003 W02503 W03003 W02003 W02503 W03003 Depth of ut: D.O..(in), eed: f(ipr) D.O.. f D.O.. f ~0.004 ~ ~0.008 ~ ~0.004 ~ ~0.008 ~ emarks Wet : 1st ecommendation : 2nd ecommendation SOID ND IS IIN S S NI INDX win ars are sold in 5 piece boxes. Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 37

38 DYNI S [ INS] [SW ] /S-S- xcellent ar (oring / Internal acing) (ax. Overhang ength /D=~5.5) DS Shank Dia. ØD Straight ole Dia. Ød INSS Ø8 Ø2.5 Ø10 Ø3.0 Ø12 Ø4.0 Ø16 Ø5.0 ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder N & D S-S- ar (oring / Internal acing) (ax. Overhang ength /D=~4) UNIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN /-S- arbide Shank ar (oring / Internal acing) (ax. Overhang ength /D=~7) U-O Shank Dia. ØD Ø8 Straight ole Dia. Ød Ø3 Ø10 Ø3 DIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø12 Ø16 Ø4 Ø4 SOID ND IS IIN S S NI INDX Visit us online at Kyocerarecisionools.com

39 DYNI S [ INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar 06-S 2 Þ Þ /64 Yes ig.2 S S 2 Þ Þ inch /64 Yes ig.2 10-S 3 Þ Þ /64 Yes ig.2 S S10-S No ig.1 S-1635 S10-S No ig.1-6 S10-S No ig.1 S-2035 S10-S No ig.1 mm 08X-S Yes ig.2 INSS N & D 10-S Yes ig.2 S S Yes ig.2 16Q-S Yes ig.2 S S08X-S No ig.3 UNIN S10-S No ig.3 S mm S12-S No ig.3 S16Q-S No ig.3 S N-S 2 Þ Þ /64 Yes ig.6 06N-S 2-2/3 Þ Þ /64 Yes ig.6 arbide 08Q-S 2 Þ Þ /64 Yes ig.6 inch 08Q-S 2-2/3 Þ Þ /64 Yes ig.6 10X-S 3 Þ Þ /64 Yes ig.6 10X-S 3-2/3 Þ Þ /64 Yes ig.6 04-S No ig.5 05-S Þ No ig.5 06-S No ig.5 07K-S No ig.5 S-2545 S-1635 S OOVIN U-O 08-S Yes ig.6 08-S / Yes ig.6 mm 10N-S Yes ig.6 10N-S /3 Þ Yes ig.6 12Q-S Yes ig.6 S DIN 12Q-S / Yes ig.6 16X-S Yes ig.6 16X-S / Yes ig.6 S SOID ND IS pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing- edium inishing- edium edium inishing- edium inishing inishing / recision ow eed ef. age , 10 8, , 12 K Q Standard Q - -S (/) -U...S S S S S S oolholder pplication ow eed / recision Stainless ast Iron Non-ferrous etals Non-ferrous etals Non-ferrous etals ard aterials ef. age US Q Without hipbreaker 3 D N...S W S W W S S W W215.. W S S W W325.. W325.. ecommended utting onditions 71~ 72 IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 39

40 DYNI [ INS] [SW ] -S- xcellent ar (oring / Internal acing) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Ø10 Ø12 Straight ole Dia. Ød Ø3 Ø4 ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø5 N & D S-S- ar (oring / Internal acing) (ax. Overhang ength /D=~4) UNIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN -S- arbide Shank ar (oring / Internal acing) (ax. Overhang ength /D=~7) U-O Shank Dia. ØD Straight ole Dia. Ød Ø10 Ø3 DIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø12 Ø16 Ø4 Ø4 SOID ND IS IIN S S NI INDX Visit us online at Kyocerarecisionools.com

41 DYNI [ INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar 05K-S 2 Þ Þ /64 Yes ig.1 S S 2.5 Þ Þ /64 Yes ig.1 inch S S 2.5 Þ Þ /64 Yes ig.1 10-S 3 Þ Þ /64 Yes ig.1 S S Yes ig.1 S S Yes ig.1 mm 12-S Yes ig.1 S Q-S Yes ig.1 S10-S No ig.2 S S12-S No ig.2 mm S12-S No ig.2 S S16Q-S No ig.2 10N-S Yes ig.3 INSS N & D UNIN 10N-S / Yes ig.3 arbide 10N-S / Yes ig.3 12Q-S Yes ig.3 12Q-S /3 mm Yes ig.3 12Q-S / Yes ig.3 S X-S Yes ig.3 16X-S / Yes ig.3 16X-S / Yes ig.3 S OOVIN pplicable Inserts oolholder pplication inishing inishing inishing- edium edium inishing- edium ow arbon / inishing ow arbon / inishing-edium ast Iron Non-ferrous etals ard aterials ef. age Q Standard -Y X XQ Without hipbreaker D N...S S S S S ecommended utting onditions 71~ 72 U-O DIN SOID ND IS IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 41

42 S [, INS] [SW ] S-S() ar (oring / Internal acing) (ax. Overhang ength /D=~3) DS INSS ig.1 N & D ight-hand shown -S ar (oring / Internal acing) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder (ax. Overhang ength /D=~3) UNIN ig.2 OOVIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder -S() arbide Shank ar (oring / Internal acing) (ax. Overhang ength /D=~7) U-O DIN ig.3 SOID ND IS ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder IIN S S NI INDX 42 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

43 S [, INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD 1 2 Std. orner- oolant ole lamp Screw Spare arts Wrench DS arbide ** Optional sleeve S (0.625" dia.) is available. (Sleeve screw: SS-2, sleeve wrench: W-2) pplicable Inserts [] oolholder S05K-S 2 Þ Þ pplication inishing inishing inishing- edium edium inishing- edium ow arbon / inishing ow arbon / inishing-edium ast Iron Non-ferrous etals ard aterials ef. age No ig.1 S S06-S 2.5 Þ Þ /64 No ig.1 S-3-10 S08-S 3 Þ Þ /64 No ig.1 S10X-S 3 Þ Þ /64 No ig.1 S12-S 3 Þ Þ /64 No ig.1 inch S16-S 3 Þ Þ /64 No ig.1 05K-S -2 Þ /64 Yes ig.2 06-S -2 Þ /64 Yes ig.2 08-S -2 Þ /64 Yes ig.2 10S-S -2 Þ /64 Yes ig.2 025X-S 1.1 ** Þ S-4-15 S No ig.3 S K-S 2 Þ No ig.3 S S 2.5 Þ /64 No ig.3 S-3-10 inch 08-S 3 Þ /64 No ig.3 10S-S 3 Þ /64 No ig.3 12S-S 3 Þ /64 No ig.3 S-4 Q Standard -Y X XQ Without hipbreaker D N -15 INSS N & D UNIN OOVIN U-O...S S S pplicable Inserts [] oolholder pplication inute D.O.. inishing inishing inishing- edium inishing- edium edium inishing- edium inishing inishing / recision ow eed ef. age , 10 8, , 12 K Q Standard Q - -S (/) -U...S S 2...S oolholder pplication ow eed / recision Stainless ast Iron Non-ferrous etals Non-ferrous etals Non-ferrous etals ard aterials ef. age US Q Without hipbreaker 3 D N...S W DIN SOID ND IS IIN S S NI...S 2...S W W215.. W215.. ecommended utting onditions 71~ 72 INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 43

44 DYNI [D INS] [SW ] -SDU- xcellent ar (opying) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Ø10 Ø12 Straight ole Dia. Ød Ø3 Ø4 ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø5 N & D S-SDU- ar (opying) (ax. Overhang ength /D=~4) UNIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN -SDU- arbide Shank ar (opying) (ax. Overhang ength /D=~7) U-O Shank Dia. ØD Straight ole Dia. Ød Ø10 Ø3 DIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø12 Ø16 Ø4 Ø4 SOID ND IS IIN S S NI INDX Visit us online at Kyocerarecisionools.com

45 DYNI [D INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD S Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar arbide 06-SDU 2 Þ Þ /64 Yes ig.1 08-SDU 2 Þ Þ inch /64 Yes ig.1 10-SDU 2 Þ Þ /64 Yes ig.1 16Q-SDU S Yes ig.1 S SDU Yes ig.2 12-SDU mm Yes ig.2 16Q-SDU Yes ig.2 S Q-SDU Yes ig.2 S S16Q-SDU No ig.3 S S20-SDU No ig.3 S S10-SDU No ig.4 mm S12-SDU No ig.4 S16Q-SDU No ig.4 S-2560 S16Q-SDU No ig.4 S N-SDU 2 Þ /64 Yes ig.5 06N-SDU 2-2/3 Þ /64 Yes ig.5 08Q-SDU 2 Þ /64 Yes ig.5 inch 08Q-SDU 2-2/3 Þ /64 Yes ig.5 10X-SDU 2 Þ /64 Yes ig.5 10X-SDU 2-2/3 Þ /64 Yes ig.5 10N-SDU Yes ig.5 10N-SDU / Yes ig.5 12Q-SDU Yes ig.5 12Q-SDU / Yes ig.5 mm 16X-SDU Yes ig.5 16X-SDU /3 Þ Yes ig.5 16X-SDU Yes ig.5 16X-SDU / Yes ig.5 pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing- edium inishing- edium inishing- oughing inishing inishing / recision ow eed S-2560 S-2560 S-4065 ow eed / recision ef. age 15 15, , K K Q Standard - -S (/) -U -US (/) ow eed INSS N & D UNIN OOVIN U-O DIN SOID ND IS...-SDU SDU SDQ SDQ D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. IIN...-SDZ SDU SDQ SDZ D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. S S pplication ow eed / recision ow arbon / inishing ow arbon / inishing-edium Stainless ast Iron Non-ferrous etals Non-ferrous etals Non-ferrous etals ard aterials ef. age S X XQ Q Without hipbreaker -3 D N NI oolholder...-sdu SDU INDX...-SDQ SDQ D D215.. DW D215.. DW SDZ SDU SDQ D325.. D325.. D325.. D325.. DW325.. D325.. D325.. D325.. DW SDZ ecommended utting onditions 71~ 72 Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 45

46 DYNI [D INS] [SW ] -SDQ- xcellent ar (opying) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Ø10 Ø12 Straight ole Dia. Ød Ø3 Ø4 ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø5 N & D S-SDQ- ar (opying) (ax. Overhang ength /D=~4) UNIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN -SDQ- arbide Shank ar (opying) (ax. Overhang ength /D=~7) U-O DIN SOID ND IS oolholder Dimensions art Number Stock ight-hand shown Unit in. ore Dia. Shank Dia. ØD eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD S Std. orner- oolant ole lamp Screw Ø10 Ø12 Ø16 Spare arts Straight ole Dia. Ød Ø3 Ø4 Ø4 Wrench NI S S IIN xcellent ar arbide 06-SDQ 2 Þ Þ /64 Yes ig.1 08-SDQ 2 Þ Þ inch /64 Yes ig.1 10-SDQ 2 Þ Þ /64 Yes ig.1 10-SDQ Yes ig.1 12-SDQ mm Yes ig.1 16Q-SDQ Yes ig.1 S10-SDQ No ig.2 S12-SDQ mm No ig.2 S16Q-SDQ No ig.2 10N-SDQ Yes ig.3 10N-SDQ / Yes ig.3 12Q-SDQ Yes ig.3 mm 12Q-SDQ / Yes ig.3 S-2560 S-2560 S-2560 S INDX 16X-SDQ Yes ig.3 16X-SDQ / Yes ig.3 ecommended utting onditions 71~ 72 pplicable Inserts (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

47 DYNI [D INS] [SW ] -SDZ- xcellent ar (ack oring) (ax. Overhang ength /D=~5.5) DS Shank Dia. ØD Ø10 Ø12 Straight ole Dia. Ød Ø3 Ø4 INSS ight-hand shown ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder Ø16 Ø5 S-SDZ- ar (ack oring) (ax. Overhang ength /D=~4) N & D UNIN ight-hand shown ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder -SDZ- arbide Shank ar (ack oring) (ax. Overhang ength /D=~7) OOVIN Shank Dia. ØD Straight ole Dia. Ød U-O Ø10 Ø3 oolholder Dimensions ight-hand shown ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder Ø12 Ø16 Ø4 Ø4 DIN art Number Stock in. ore Dia. Dimensions (mm) Ø ØD S Std. orner- oolant ole lamp Screw Spare arts Wrench SOID ND IS xcellent ar 16Q-SDZ Yes ig.1 S SDZ Yes ig.2 S SDZ Yes ig.2-8 S Q-SDZ Yes ig.2 16Q-SDZ Yes ig.2 S S16Q-SDZ No ig.3 S S10-SDZ No ig.4 S-2545 IIN S S arbide S12-SDZ No ig.4-8 S-2560 S16Q-SDZ No ig.4 S16Q-SDZ No ig.4 S N-SDZ Yes ig.5 S Q-SDZ Þ Yes ig.5-8 S X-SDZ Yes ig.5 NI 16X-SDZ Yes ig.5 S ecommended utting onditions 71~ 72 pplicable Inserts 45 INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 47

48 S [D INS] [SW ] S-SDU ar (opying) (ax. Overhang ength /D=~3) DS INSS N & D UNIN oolholder Dimensions art Number ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 S Std. orner- oolant ole lamp Screw Spare arts Wrench S08-SDU 2 Þ Þ S10X-SDU 2 Þ Þ inch S12-SDU 3 Þ Þ S16X-SDU 3 Þ Þ /64 S No 1/32 S OOVIN U-O pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing- edium inishing- edium inishing- oughing inishing inishing / recision ow eed ow eed / recision ef. age 15 15, , K K Q Standard - -S (/) -U -US (/) - ow eed...-sdu 2 D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D SDU 3 D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. DIN SOID ND IS oolholder pplication ow eed / recision ow arbon / inishing ow arbon / inishing-edium Stainless ast Iron Non-ferrous etals Non-ferrous etals Non-ferrous etals ard aterials ef. age S X XQ Q Without hipbreaker -3 D N...-SDU 2 - D D215.. DW D215.. DW SDU 3 D325.. D325.. D325.. D325.. DW325.. D325.. D325.. D325.. DW325.. IIN ecommended utting onditions 71~ 72 S S NI INDX 48 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

49 S [D INS] [SW ] S-SDZ ar (ack oring) (ax. Overhang ength /D=~3) DS INSS oolholder Dimensions art Number ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 S Std. orner- oolant ole lamp Screw Spare arts Wrench N & D UNIN S10Q-SDZ 2 Þ Þ /64 S10X-SDZ 2 Þ Þ /64 inch S12-SDZ 3 Þ /32 S16X-SDZ 3 Þ Þ /32 No S-2560 S pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing- edium inishing- edium inishing- oughing inishing inishing / recision ow eed ow eed / recision ef. age 15 15, , K K Q Standard - -S (/) -U -US (/) - ow eed...-sdz 2 D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. OOVIN U-O...-SDZ 3 D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. oolholder pplication ow eed / recision ow arbon / inishing ow arbon / inishing-edium Stainless ast Iron Non-ferrous etals Non-ferrous etals Non-ferrous etals ard aterials ef. age S X XQ Q Without hipbreaker -3 D N...-SDZ 2 - D D215.. DW D215.. DW SDZ 3 D325.. D325.. D325.. D325.. DW325.. D325.. D325.. D325.. DW325.. DIN SOID ND IS ecommended utting onditions 71~ 72 IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 49

50 [ INS] [SW ] -S arbide Shank ar (oring / Internal acing) (ax. Overhang ength /D=~7) DS INSS N & D ight-hand shown -SZ arbide Shank ar (ack oring) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder (ax. Overhang ength /D=~7) UNIN OOVIN U-O oolholder Dimensions art Number Stock ight-hand shown in. ore Dia. Dimensions (mm) Ø ØD S ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder When using -hand oolholder, Use -hand insert for machining in this direction () Use -hand insert for machining in this direction () Std. orner- lamp Screw Spare arts Wrench DIN 04X-S X-SZ S pplicable Inserts SOID ND IS pplication inishing inishing / recision ef. age S oolholder IIN...-S SZ S S NI INDX ecommended utting onditions 71~ 72 eatures of -S 1. Well balanced design minimizing bore diameter yet maintaining a smaller insert radius. 2. igh flexibility of tool pass during pecking. 3. ood surface finish at internal facing. eatures of -SZ 1. ack boring bars for workpieces which require high concentric circle accuracy and are unavailable for chuck change. 2. vailable for back boring and pecking. 3. arge clearance between cutting edge and holder (1.8mm). 50 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

51 DYNI [ INS] [SW ] -S- xcellent ar (oring / Internal acing) (ax. Overhang ength /D=~5.5) DS INSS ight-hand shown S-S- ar (oring / Internal acing) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder (ax. Overhang ength /D=~4) N & D UNIN oolholder Dimensions ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN art Number Stock in. ore Dia. Dimensions (mm) Ø ØD S Std. orner- oolant ole lamp Screw Spare arts Wrench U-O xcellent ar 08X-S Yes ig.1 10-S Yes ig.1 10-S Yes ig.1 12-S Yes ig.1 16Q-S Yes ig.1 S08X-S No ig.2 S10-S No ig.2 S10-S No ig.2 S12-S No ig.2 S-2250 S-2560 S-2250 S DIN SOID ND IS S16Q-S No ig.2 pplicable Insert IIN pplication inishing-edium oolholder ef. age Q 23 S S...-S S ecommended utting onditions 71~ 72 NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 51

52 NW IS! DYNI [, INS] [SW ] /S-S()- xcellent ar (oring / Internal acing) (ax. Overhang ength /D=~5.5) DS Shank Dia. ØD Straight ole Dia. Ød INSS Ø8 Ø2.5 Ø10 Ø3.0 Ø12 Ø4.0 Ø16 Ø5.0 ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder N & D S-S()- ar (oring / Internal acing) (ax. Overhang ength /D=~4) UNIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN ()-S()- arbide Shank ar (oring / Internal acing) (ax. Overhang ength /D=~7) U-O Shank Dia. ØD Ø8 Straight ole Dia. Ød Ø3 Ø10 Ø3 DIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø12 Ø16 Ø4 Ø4 SOID ND IS IIN S S NI INDX Visit us online at Kyocerarecisionools.com

53 DYNI [, INS] [SW ] NW IS! oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD S Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar arbide S04-S 1.2 Þ Þ No ig.1 05K-S 1.2 Þ Þ Yes ig.2 S K-S 1.8 Þ Þ /64 Yes ig.2 06-S 1.8 Þ Þ inch /64 Yes ig.2 S S 2 Þ Þ /64 Yes ig.2 08-S 2 Þ Þ /64 Yes ig.2 S S 2 Þ Þ /64 Yes ig.2 S06-S No ig.1 S X-S Yes ig.2 S X-S Yes ig.2 S S Yes ig.2 mm 10-S Yes ig.2 S S Yes ig.2 12-S Yes ig.2 S Q-S Yes ig.2 S S06-S No ig.3 S S08X-S No ig.4 S-1-6 S08X-S No ig.4 S S10-S No ig.4 mm S10-S No ig.4 S S12-S No ig.4 S12-S No ig.4 S S16Q-S No ig.4 S S No ig.5 S S Yes ig.6 S S Yes ig.6 10N-S Yes ig.6 10N-S / Yes ig.6 S N-S / Yes ig.6 10N-S Yes ig.6 10N-S / Yes ig.6 10N-S /2 mm Yes ig.6 12Q-S Yes ig.6 S Q-S / Yes ig.6 12Q-S / Yes ig.6 12Q-S / Yes ig.6 12Q-S Yes ig.6 S X-S Yes ig.6 16X-S / Yes ig.6 S X-S / Yes ig.6 pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing inishing- edium inishing inishing / recision edium ow eed / recision ow arbon / inishing ef. age 23, , 26, D Q -S - -US X...-S S S S S S S pplication ow arbon / inishing-edium ast Iron Non-ferrous etals ard aterials ef. age 26 23, 27 14~ 16 6 oolholder XQ Without hipbreaker D N INSS N & D UNIN OOVIN U-O DIN SOID ND IS IIN S S NI INDX...-S S W121.. W S S S S S Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com ecommended utting onditions 71~ 72 53

54 S [, INS] S-SU() ar (oring) [SW ] (ax. Overhang ength /D=~3) DS INSS U-O OOVIN UNIN N & D oolholder Dimensions art Number S04-SU 1.2 S-SW ar (opying) ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 S Þ /64 S06-SU 1.8 Þ Þ /64 inch S08-SU 1.8 Þ Þ /64 Std. orner- oolant ole No lamp Screw S-1S Spare arts S05K-SU 1.5 Þ /64 S-1-6 S10X-SU 2 Þ Þ /64 S12-SU 2 Þ Þ /64 S-2 S-3 Wrench pplicable Inserts 55 (ax. Overhang ength /D=~3) DIN SOID ND IS IIN oolholder Dimensions art Number ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD S Std. orner- oolant ole lamp Screw Spare arts Wrench S S S06-SW 2 Þ /64 S08-SW 2 Þ /64 S10X-SW 2 Þ inch /64 S12-SW 2 Þ /64 No S-3S -10 S16-SW 2 Þ /64 NI pplicable Inserts 55 INDX Visit us online at Kyocerarecisionools.com

55 S [, INS] S-U ar (opying) [SW / O ] (ax. Overhang ength /D=~3) DS INSS oolholder Dimensions art Number Stock ight-hand shown Unit in. ore Dia. Dimensions Ø ØD 1 2 S eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Std. orner- oolant ole lamp ssembly Wrench Spare arts Shim Shim Screw N & D UNIN S10X-U 2 Þ inch /64 S-2S No S12X-U 2 Þ /64 S-2 - W pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing inishing- edium inishing inishing / recision edium ow eed / recision ow arbon / inishing ef. age 23, , 26, D Q -S - -US X...-SU SU SU SU 2...-SW 2...-U 2 pplication ow arbon / inishing-edium ast Iron Non-ferrous etals ard aterials ef. age 26 23, 27 14~ 16 6 oolholder XQ Without hipbreaker D N...-SU W SU SU SU 2...-SW 2...-U W ecommended utting onditions 71~ 72 OOVIN U-O DIN SOID ND IS IIN S S NI INDX Visit us online at Kyocerarecisionools.com 55

56 S [, INS] [SW ] -SX() arbide Shank ar (oring / Internal acing) (ax. Overhang ength /D=~7) DS INSS N & D ight-hand shown -SZ arbide Shank ar (ack oring) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder (ax. Overhang ength /D=~7) UNIN OOVIN ight-hand shown oolholder Dimensions ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder When using -hand oolholder, Use -hand insert for machining in this direction () Use -hand insert for machining in this direction () U-O art Number revious art Number Stock in. ore Dia. Dimensions (mm) Ø ØD S Std. orner- lamp Screw Spare arts Wrench DIN SOID ND IS 06-SX SX W S-1S 08X-SX SX W S X-SX SX W S SZ SZ W S-1S -6 pplicable Inserts 57 IIN S S NI INDX 56 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

57 S [, INS] [SW ] pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing inishing- edium inishing inishing / recision ow eed / recision ow arbon / inishing ef. age 23, , 26, , 27 ast Iron D Q -S -US X Without hipbreaker DS...-SX SX W SX SX SX SZ SZ pplication Non-ferrous etals ard aterials ef. age 14~ 16 6 oolholder D N INSS N & D UNIN...-SX SX SX SX SX SZ SZ ecommended utting onditions...sx() oring ar ecommended utting onditions 71~ 72 (Work aterial : 4140) OOVIN oolholder Description Insert Description (rade) Insert rade (Vc:sfm) Depth of ut: D.O..(in), eed: f(ipr) D.O.. f oolant U-O 06-SX (930) 100~ ~ ~0.002 Yes 08X-SX (930) 100~ ~ ~0.003 Yes 10X-SX (930) 100~ ~ ~0.003 Yes DIN SOID ND IS IIN S S NI INDX Visit us online at Kyocerarecisionools.com 57

58 DYNI [V, V INS] [SW ] -SV()- xcellent ar (Internal Spherical achining / Internal acing) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Straight ole Dia. Ød Ø12 Ø4 N & D lease see 59 for cutting instructions ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø4 S-SV()- ar (Internal Spherical achining / Internal acing) (ax. Overhang ength /D=~4) UNIN OOVIN lease see 59 for cutting instructions ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder oolholder Dimensions U-O DIN SOID ND IS xcellent ar art Number Stock in. ore Dia. Dimensions (mm) Ø ØD SV Yes ig.1 12-SV Yes ig.1 16Q-SV Yes ig.1 S12-SV No ig.2 S12-SV No ig.2 S16Q-SV No ig.2 Std. orner- oolant ole Spare arts lamp Screw Wrench S S IIN S S NI pplicable Inserts oolholder pplication inishing inishing inishing inishing-edium inishing / recision ow eed / recision Non-ferrous etals ard aterials ef. age K V Q -S -US D N...-SV V V V SV V V V V VW ecommended utting onditions 71~ 72 INDX 58 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

59 DYNI [V, V INS] [SW ]...SV()-, S...SV()- xcellent ar (Internal Spherical achining / Internal acing) efer to age 58 (Dynamic bar) 1. pplication ange DS INSS N & D 2. achining ethod In ases with No xisting ole inishing UNIN OOVIN f=0.002ipr f should be under 0.002ipr at internal facing In ases with Drilled ole U-O DIN SOID ND IS 3. aution f=0.002ipr f should be under 0.002ipr at internal facing IIN S S NI INDX Visit us online at Kyocerarecisionools.com 59

60 DYNI [V, V INS] [SW ] -SV()- xcellent ar (opying / Undercutting) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Ø10 Ø12 Straight ole Dia. Ød Ø3 Ø4 ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø5 N & D S-SV- ar (opying / Undercutting) (ax. Overhang ength /D=~4) UNIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN -SV()- arbide Shank ar (opying / Undercutting) (ax. Overhang ength /D=~7) U-O Shank Dia. ØD Straight ole Dia. Ød Ø10 Ø3 DIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø12 Ø16 Ø4 Ø4 SOID ND IS IIN S S NI INDX Visit us online at Kyocerarecisionools.com

61 DYNI [V, V INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD S Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar 06-SV 1.5 Þ Þ /64 Yes ig.1 08-SV 2 Þ Þ inch /64 Yes ig.1 S SV 2 Þ Þ /64 Yes ig.1 10-SV Yes ig.1 S SV mm Yes ig.1 S Q-SV Yes ig.1 INSS N & D S10-SV No ig.2 S arbide pplicable Inserts oolholder S12-SV mm No ig.2 S16Q-SV No ig.2 10N-SV pplication inishing inishing inishing inishing-edium inishing inishing / recision inishing-edium Non-ferrous etals ard aterials ef. age 28, 30 28, , S Yes ig.3 S Q-SV mm Yes ig.3 16X-SV Yes ig.3 S-2570 V Q - -S -Y D N -8-8 UNIN OOVIN...-SV SV V V V V VW SV SV V22.. V22.. V22.. V22.. V_22.. V22.. V22.. V22.. VW22.. ecommended utting onditions 71~ 72 U-O DIN SOID ND IS IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 61

62 DYNI [V, V INS] [SW ] -SVU()- xcellent ar (opying) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Outer ole Dia. Ød Ø12 Ø4 N & D ight-hand shown S-SVU()- ar (opying) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø5 (ax. Overhang ength /D=~4) UNIN OOVIN ight-hand shown -SVU()- arbide Shank ar (opying) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder (ax. Overhang ength /D=~7) U-O DIN Shank Dia. ØD Straight ole Dia. Ød Ø12 Ø4 SOID ND IS ight-hand shown -SVZ()- xcellent ar (ack oring) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø4 (ax. Overhang ength /D=~5.5) IIN S S Shank Dia. ØD Ø12 Outer ole Dia. Ød Ø4 NI ight-hand shown -SVZ()- ar (ack oring) ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder Ø16 Ø5 (ax. Overhang ength /D=~4) INDX ight-hand shown ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder Visit us online at Kyocerarecisionools.com

63 DYNI / [V, V INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD S Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar Þ Þ inch 10-SVU 2 Þ Þ /64 Yes ig.1 S SVU Yes ig.1 S mm 16Q-SVU Yes ig.1 S SVZ 1.5 Þ Þ /64 Yes ig.1 S inch 10-SVZ 2 Þ /64 Yes ig.1 S INSS N & D ar arbide xcellent ar S12-SVU No ig.2 S S16Q-SVU No ig.2 S Q-SVU Yes ig.3 S X-SVU Yes ig.3 S mm 12-SVZ Yes ig.4 S Q-SVZ Yes ig.4 S S12-SVZ No ig.5 S S16Q-SVZ No ig.5 S UNIN S-SV ar (Internal Spherical achining / Internal acing) (ax. Overhang ength /D=~3) OOVIN U-O DIN oolholder Dimensions pplicable Inserts oolholder art Number pplication inishing inishing inishing inishing-edium inishing inishing / recision inishing-edium Non-ferrous etals ard aterials ef. age 28, 30 28, , ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD S S08-SV 2 Þ Þ inch S10X-SV 2 Þ Þ V Q - -S -Y D N Std. orner- oolant ole lamp Screw Spare arts Wrench 1/64 No S SOID ND IS IIN S S NI...-SVU SVU V V V V VW SVU SVU V22.. V22.. V22.. V22.. V_22.. V22.. V22.. V22.. VW SVZ SVZ V V V V VW SVZ SVZ V22.. V22.. V22.. V22.. V_22.. V22.. V22.. V22.. VW SV 2 V22.. V22.. V22.. V22.. V_22.. V22.. V22.. V22.. VW22.. ecommended utting onditions 71~ 72 INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 63

64 DYNI [W, W INS] [SW ] S/-SWU()- xcellent ar (oring) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Outer ole Dia. Ød Ø8 Ø2.5 N & D ight-hand shown Ø10 Ø3.0 Ø12 Ø4.0 Ø16 Ø5.0 eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder UNIN S/-SWU()- ar (oring) (ax. Overhang ength /D=~4) OOVIN U-O ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder ()-SWU()- arbide Shank ar (oring) (ax. Overhang ength /D=~7) DIN SOID ND IS Shank Dia. ØD Outer ole Dia. Ød Ø5 - Ø6 - Ø7 - IIN Ø8 Ø10 Ø12 Ø3 Ø3 Ø4 S S ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø4 NI INDX Visit us online at Kyocerarecisionools.com

65 DYNI [W, W INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar arbide S06-SWU 1.2 Þ Þ pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing-edium inishing inishing-edium ast Iron Non-ferrous etals ard aterials ef. age , No ig.1 S06-SWU 1.5 Þ Þ No ig.1 S SWU 1.5 Þ Þ inch Yes ig.2 S SWU 2 Þ Þ /64 Yes ig.2 S SWU 3 Þ Þ /32 Yes ig.2 S S10-SWU No ig.1 S10-SWU No ig.1 S10-SWU No ig.1 08X-SWU Yes ig.2 mm 10-SWU Yes ig.2 12-SWU Yes ig.2 16Q-SWU Yes ig.2 S-2035 S-2050 S Q-SWU Yes ig.2 S S10-SWU No ig.3 S10-SWU No ig.3 S10-SWU No ig.3 S08X-SWU No ig.4 mm S10-SWU No ig.4 S12-SWU No ig.4 S16Q-SWU No ig.4 S-2035 S-2050 S-2545 S16Q-SWU No ig.4 S SWU No ig.5 06-SWU No ig.5 07K-SWU No ig.5 08-SWU Yes ig.6 10N-SWU Yes ig.6 10N-SWU / Yes ig.6 10N-SWU / Yes ig.6 12Q-SWU Yes ig.6 mm 12Q-SWU / Yes ig.6 12Q-SWU / Yes ig.6 16X-SWU Yes ig.6 16X-SWU / Yes ig.6 16X-SWU / Yes ig.6 16X-SWU Yes ig.6 16X-SWU / Yes ig.6 16X-SWU / Yes ig.6 S-2035 S-2050 S-2545 S D Q - -Y Without hipbreaker D N...-SWU SWU W W W_ WW121.. W121.. WW SWU SWU W W_ WW W WW SWU SWU W W W215.. WW215.. W SWU SWU W W W32.. WW ecommended utting onditions 71~ 72 INSS N & D UNIN OOVIN U-O DIN SOID ND IS IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 65

66 [W, W INS] [SW ] -SWU arbide Shank ar (oring) (ax. Overhang ength /D=~7) DS INSS N & D UNIN oolholder Dimensions art Number ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 S Std. orner- oolant ole lamp Screw Spare arts Wrench arbide 0325K-SWU 1.2 Þ Þ /64 1/64 S inch No 045K-SWU 1.5 Þ Þ /64 1/64 S OOVIN U-O DIN pplicable Inserts oolholder pplication inute D.O.. inishing inishing ast Iron Non-ferrous etals ard aterials ef. age , D - Without hipbreaker D N...-SWU 1.2 W121.. W121.. W_121.. WW121.. W121.. WW SWU W W_ WW W WW ecommended utting onditions 71~ 72 SOID ND IS IIN S S NI INDX 66 (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

67 [W, W INS] [SW ] S-SWU ar (oring / Internal acing) (ax. Overhang ength /D=~3) DS INSS oolholder Dimensions art Number ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 Std. orner- oolant ole lamp Screw Spare arts Wrench N & D UNIN S06-SWU 1.2 Þ Þ S inch No S06X-SWU 1.5 Þ Þ /64 S pplicable Inserts oolholder pplication inute D.O.. inishing inishing ast Iron Non-ferrous etals ard aterials ef. age , D - Without hipbreaker D N...-SWU 1.2 W121.. W121.. W_121.. WW121.. W121.. WW SWU W W_ WW W WW ecommended utting onditions 71~ 72 OOVIN U-O DIN SOID ND IS IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 Visit us online at Kyocerarecisionools.com 67