2011 APPLICATION GUIDE EFFECTIVE JANUARY 1, 2011

Transcription

1 APPLICATION GUIDE EFFECTIVE JANUARY 1, 2011 COMPLETE KITS SPINDLES / BALL JOINTS OVER KITS LOWERING / LIFTING STRUTS SPRINGS / SPRING SPACERS LEAF SPRINGS / BLOCK KITS C-SECTION / FLIP KITS SHOCK ABSORBERS ANTI-SWAY BARS SHACKLE + HANGER KITS

2 0 Trust in Belltech, a frequent SEMA Best New Product award winner.

3 2011 ApplicatioN Guide Table Of CONTENTS Muscle Cars - Introduction 3 Buick Apollo, Grand National, Regal, Roadmaster, Skylark 4-5 Chevrolet Bel Air, Camaro, Caprice, Chevelle 4-5 Chevrolet El Camino, Impala, Malibu, Monte Carlo, Chevy II, Nova 6-7 Chrysler 300C V8 6-7 Dodge Mopar, Challenger, Charger, Coronet, Dart, Magnum V8 8-9 Ford Mustang, Fairlane, Falcon, Maverick 8-9 Mercury Cougar 8-9 Oldsmobile Cutlass Pontiac Firebird, Grand Prix, GTO, LeMans Coilover Applications for Cadillac, Chevy, Dodge Ford and Pontiac 12 Trucks + SUVs - Introduction 13 Chevrolet / GMC / Colorado / Canyon, GMC S-Series 2WD Chevrolet / GMC, GMC S-Series 4WD Chevrolet / GMC Full-Size Truck 2WD Chevrolet / GMC Full-Size Truck 4WD Chevrolet / GMC SUV 2WD Cadillac / Chevrolet / GMC SUV 4WD Chevrolet / GMC Vans Dodge Truck + SUVs Ford Truck + SUV 2WD Ford Truck + SUV 4WD Import Truck + SUVs Shocks - Introduction 46 Belltech Lowering Shocks Lift, Lowering Struts 50 OEM Shocks How to Build A Custom Shock 53 Components 54 Spindles 54 Ball Joints, I Beams 55 Front End Alignment Kits (Caster/Camber) 55 Front Coil Springs Torsion Bar Keys 58 Coilover Kits 58 Spring Distance Spacers 59 Anti Sway Bar Adapters 59 Anti Sway Bars 60 Shackle Kits 61 Hanger Kits w/ Hardware 61 Flip Kit + C-Sections Lowering Block Kits 63 Shock Extensions 63 Shackle + Hanger Kits 64 Rear Coil Springs 65 Rear Leaf Springs 66 Drive Line Alignment Kits 66 Pinion Shims 66 Airjack Suspension Kits 67 Airjack Compressor Kits + Accessories 67 Transmission Cross Member 67 Universal Bumpstops 67 WARRANTY INFORMATION 68 1

4 Belltech A History of PERFORMANCE IN MOTION The Belltech Story: Just as the idea of customizing sport trucks was catching on in the 80s, a small company in Fresno, California decided to build an innovative suspension system that would not just lower trucks, but do it in a way that would change the way they would ride for decades. Belltech s pioneering efforts more than 30 years ago serve as the foundation of our success today with a focus on engineering, research and development and most importantly quality. The Better Solution: While trucks were being lowered in the late 80s, their suspensions were improvised versions of stock suspensions and faced numerous performance issues including poor ride performance. Belltech s design staff crafted a customized, purpose-built suspension which lowered the vehicle, but front-end geometry remained the same. From this innovative approach, America s Sport Truck craze was officially launched. Keeping with the spirit of the company s best performing suspension, the Belltech staff designed and created a series of components using durable high-strength materials and designs. The results of these efforts have made Belltech the most requested and successful truck suspension brand in the industry. With a lowered suspension line of products, the company turned its focus to another important piece of ride quality shocks. Stock shocks obviously worked well with stock suspensions, but due to the modified ride height the original shock geometry was affected. Belltech introduced the Nitro Drop shock and Nitro Active lines featuring vehicle-specific designs that revolutionized the entire suspension system. Belltech later took its focus on shocks to a new level with the introduction of the Nitro Drop 2 and Street Performance shock. These lines utilize twin-tube technology and separate rebound and compression valves to further improve ride quality. More importantly, it meant that enthusiasts had more options to customize their truck than ever before. Belltech s Growth & Expertise: In early 2005 Belltech, and its sister company Suspension Techniques, joined the team of KW Automotive North America, Inc. KW s rich background in race suspension design and development allowed Belltech to accelerate its growth in product development through access to expanded technologies. Today s trucks and SUV s are built on more sophisticated chassis than ever before, utilizing McPherson struts and independent set-ups on both front and rear axles. These advances in vehicle design demand a broader range of lowering solutions including the company s innovative height adjustable coilovers. Belltech Today Sport Trucks & Muscle Cars: Our growth during the past three decades has made it possible for the company to grow from a modest beginning, to a state-of-the-art manufacturing facility. Our Sanger, California operation provides the opportunity for the company to expand its business for both our R&D and Engineering teams. These new additions have resulted in the development of new products like the GM Colorado / Canyon lowering ball joint and our new line of Ford F-150 drop spindles. In late 2009 Belltech expanded its line of suspension products to include applications for classic and modern day Muscle Cars. From 55 Bel Airs to modern day Mustangs and Camaros you can enhance your ride and performance with a Belltech Muscle Car Handling Kit. Whether it s starting an entirely new trend or continuing to improve upon existing products, Belltech has evolved into the recognized leader in the suspension industry. What began more than 30 years ago as an idea, is now one of the premier companies of this industry. It s that same entrepreneurial spirit, focus on customer service and uncompromising quality that make Belltech one of the world s most respected manufacturers of suspensions. 2

5 Complete Performance Kits For MUSCLE CARS Belltech Complete Kits are an easy way to get all the necessary components you need to lower and make your muscle car perform better. Belltech has expanded our line to include a wider range of popular muscle car applications. Our engineers focus on specifics of each vehicle to ensure the kit is perfectly matched to each individual application. Application specific Street Performance shock absorbers: Oversized construction, independent valves, teflon seals & bushings. Increased handling & performance at maximum comfort. Performance Coil Spring sets: Manufactured of Chromium alloy steel, shot- peened, then powder-coated to exact specifications to assure proper ride height, ride quality and long life. Available in OEM stock replacement or lowered ride heights. Anti Sway Bar sets: Front and Rear Bars manufactured of cold formed solid steel, including polyurethane bushings and high grade mounting hardware to insure reduced body roll and increased steering response. COMPONENTS TRUCKS + SUVS MUSCLE CARS 3

6 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL CHASSIS CODE / SPRING S BUICK KITS 2" DROP SPINDLES SPRINGS SPRINGS Apollo X-Body 0"F/ 0"R X-Body 2"F/ 2"R G-Body 0"F/ 0"R Grand National, T-Type G-Body 2"F /1.5"R A-Body 0"F/ 0"R A-Body 2"F/ 2"R Regal G-Body 0"F /0"R G-Body 2"F/ 2"R G-Body 2"F/ 2"R B-Body 1.5"F/ 2.25"R B-Body 2"F/ 2.25"R Roadmaster Wagon B-Body 2"F/ 2.75"R A-Body 0"F/ 0"R A-Body 2"F/ 2"R A-Body 2" Skylark A-Body 0"F /0"R A-Body 2"F/ 2"R A-Body 0"F /0"R A-Body 2"F/ 2"R CHEVROLET Roadmaster VEHICLE DATA "F/ 3"R , 210, Bel -Air 2"F/ 3"R "F/ 3"R F-Body 0"F/ 0"R F-Body 2"F/ 2"R F-Body 2" F-Body 0"F/ 0"R F-Body 2"F/ 2"R Camaro F-Body 2" F-Body 2" F-Body 0"F/ 0"R F-Body 2"F/ 2"R F-Body 2"F/ 2"R V8 F-Body 1.4"F/ 1.4R V8 F-Body 1.2"F/ 1.7"R V6 F-Body 1.4"F/ 1.4R V6 F-Body 1.2"F/ 1.7"R Zeta 1.4"F/ 1.4R 5846 LOWERING COMPONENTS LEAF SPRINGS B-Body 1.5"F/ 1.5"R Caprice B-Body 2"F/ 1.5"R B-Body 2"F/ 2"R Caprice Wagon B-Body 2"F/ 2.75"R A-Body 0"F/ 0"R A-Body 2"F/ 2"R A-Body 2" Chevelle A-Body 0"F/ 0"R A-Body 2"F/ 2"R A-Body 0"F/ 0"R A-Body 2"F/ 2"R

7 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: STREET PERFORMANCE SHOCK ABSORBERS SWAY BARS SWAYBAR 10102i 2210ia i 2210ia i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 10102i 2210ia 2210ia 10102i 10311h i 10311h i 10311h h h i i h 10309n h 10309n h 10309n h 10309n h 10309n h 10309n h 10309n i 2209ih i 2209ih C o l u m COMPLETE KITS PERFORMANCE HANDLING COMPLETE KITS NOTES All applications are designed for small block V8 RWD only All applications are designed for V6 Grand National All applications are designed for small block V8 RWD only All applications are designed for small block V8 RWD only All applications are designed for small block V8 RWD only. Spindle won't work w/stock Impala SS wheels. All applications are designed for small block V8 RWD only All applications are designed for small block V8 RWD only All applications are designed for small block V8 RWD only All apps designed for small block V8 RWD only. Leaf springs sold separately. Order 2 to get pair. NOTE: Lower Control Arm modification maybe needed to fit front shock for all muscle car applications All applications are designed for small block V8 RWD only. All applications are designed for small block V8 RWD only. Rear spring won't fit vehicles w/fact. equip. rear mono-leaf spring. Leaf springs sold separately. Order 2 to get pair. All applications are designed for small block V8 RWD only. Leaf springs sold separately. Order 2 to get pair. All applications are designed for small block V8 RWD only. All applications are designed for small block V8 RWD only. All applications are designed for small block V8 RWD only. Spindle will not work with stock Impala SS wheels. COMPONENTS TRUCKS + SUVS MUSCLE CARS 10104i 2209ih i 2209ih All applications are designed for small block V8 RWD only. Spindle will not work with stock Impala SS wheels i 2209ih i 2209ih All applications are designed for 1716 small block V8 RWD only i 2209ih i 2209ih i 2209ih i 2209ih NOTE: Lower Control Arm modification maybe needed to fit front shock for all muscle car applications All applications are designed for small block V8 RWD only. 5

8 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS KITS YEAR MODEL CHASSIS CODE / SPRING S CHEVROLET - continued 2" DROP SPINDLES SPRINGS A-Body 0"F/ 0"R A-Body 2"F/ 2"R A-Body 2" A-Body 0"F/ 0"R A-Body 2"F/ 2"R SPRINGS A-Body 0"F/ 0"R El Camino A-Body 2"F/ 2"R A-Body 0"F/ 0"R A-Body 2"F/ 2"R G-Body 0"F/ 0"R G-Body 2"F/ 2"R G-Body 2"F/ 2"R B-Body 2" 2110 Impala B-Body B-Body 1.5"F/ 1.5"R Impala SS B-Body 2"F/ 1.5"R B-Body 2"F/2"R A-Body 0"F/ 0"R A-Body 2"F/ 2"R A-Body 0"F/ 0"R A-Body 2"F/ 2"R A-Body 2" A-Body 0"F/ 0"R Malibu A-Body 2"F/ 2"R A-Body 0"F/ 0"R A-Body 2"F/ 2"R G-Body 0"F/ 0"R G-Body 2"F/ 2"R G-Body 2"F/ 2"R A-Body 0"F/ 0"R A-Body 2"F/ 2"R A-Body 2" Monte Carlo A-Body 0"F/ 0"R A-Body 2"F/ 2"R G-Body 0"F/ 0"R G-Body 2"F/ 2"R Chevy II VEHICLE DATA X-Body 0"F/ 0"R X-Body 2"F/ 2"R Nova X-Body 2" 2202 LOWERING COMPONENTS X-Body 0"F/ 0"R X-Body 2"F/ 2"R LEAF SPRINGS CHRYSLER C V8 LX 1.4"F/ 1.4"R C V6 LX 1.4"F/ 1.4"R C V8 LX 1-2"F/1-2"R C V6 LX 1-2"F/1-2"R NOTES: 6

9 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: STREET PERFORMANCE SHOCK ABSORBERS SWAY BARS SWAYBAR 10103i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 10103i 2209ih 2209ih 10103i 2209ih All apps designed for V8 RWD only i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih C o l u m COMPLETE KITS PERFORMANCE HANDLING COMPLETE KITS NOTES All applications are designed for small block V8 RWD only. All applications are designed for small block V8 RWD only. All apps designed for small block V8 RWD only. Spindle will not work with stock Impala SS wheels. All applications are designed for small block V8 RWD only. All applications are designed for small block V8 RWD only.. All applications are designed for small block V8 RWD only. All applications are designed for small block V8 RWD only. COMPONENTS TRUCKS + SUVS MUSCLE CARS 10102i 2210ia i 2210ia Apps. are for small block V8 RWD only. Leaf springs sold separately. Order 2 to get pair i 2210ia i 2210ia NOTE: Lower Control Arm modification maybe needed to fit front shock for all muscle car applications. Apps. are for small block V8 RWD only. Leaf springs sold separately. Order 2 to get pair. NOTES: All apps. are for small block V8 RWD only NOTE: Lower Control Arm modification maybe needed to fit front shock for all muscle car applications. 7

10 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS KITS YEAR MODEL CHASSIS CODE / SPRING S DODGE 2" DROP SPINDLES / Mopar "B" & "E" Body's 2" Challenger Challenger LX 1.4"F/ 1.4"R Coronet FORD Charger V8 LX 1.4"F/ 1.4"R 5810 Charger V6 LX 1.4"F/ 1.4"R 5806 Charger V8 LX 1-2"F/1-2"R Charger V6 LX 1-2"F/1-2"R Magnum V8 LX 1.4"F/ 1.4"R 5810 Magnum V6 LX 1.4"F/ 1.4"R 5806 Magnum V8 LX 1-2"F/1-2"R Magnum V6 LX 1-2"F/1-2"R ALL Mustang II 2" Charger Dart Fairlane Falcon Maverick VEHICLE DATA SPRINGS SPRINGS "F/ 0"R "F/ 2"R "F/ 0"R "F/ 2"R "F/ 0"R "F/ 2"R "F/ 0"R "F/ 2"R Mustang Fox 0"F/ 0"R Fox 2"F/ 2"R SN95 2"F/ 2"R SN95 1.8"F/ 2.0"R SN95 2"F/ 2"R SN95 1.8"F/ 2.0"R 5800 V S "F/ 1.4-2"R 5812 V S "F/ 1.4-2"R 5812 LOWERING COMPONENTS LEAF SPRINGS MERCURY "F/ 0"R "F/ 2"R "F/ 0"R Cougar 2"F/ 2"R "F/ 0"R "F/ 2"R " "

11 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: STREET PERFORMANCE SHOCK ABSORBERS SWAY BARS COMPLETE KITS C o SWAYBAR l u m PERFORMANCE HANDLING COMPLETE KITS 10102i 10102i NOTES All apps. are for small block V8 RWD only All apps. are for small block V8 RWD only All apps. are for small block V8 RWD only All apps. are for small block V8 RWD only All apps. are for small block V8 RWD only NOTE: Lower Control Arm modification maybe needed to fit front shock for all muscle car applications NOTE: Lower Control Arm modification maybe needed to fit front shock for all muscle car applications. All applications are designed for small block V8 RWD only. All applications are designed for small block V8 RWD only. Leaf springs sold separately. Order 2 to get pair. All applications are designed for small block V8 RWD only. COMPONENTS TRUCKS + SUVS MUSCLE CARS All applications are designed for small block V8 RWD only. Leaf springs sold separately. Order 2 to get pair All applications are designed for small block V8 RWD only NOTE: Lower Control Arm modification maybe needed to fit front shock for all muscle car applications. 9

12 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS KITS YEAR MODEL CHASSIS CODE / SPRING S OLDSMOBILE 2" DROP SPINDLES SPRINGS A-Body 0"F A-Body 2"F G-Body 0"F /0"R SPRINGS Cutlass G-Body 2"F/ 2"R G-Body 2"F/ 2"R X-Body 0"F/ 0"R X-Body 2"F/ 2"R PONTIAC F-Body 0"F/ 0"R F-Body 2"F/ 2"R F-Body 2" F-Body 0"F/ 0"R F-Body 2"F/ 2"R Firebird F-Body 2" F-Body 2" F-Body 0"F/ 0"R F-Body 2"F/ 2"R F-Body 2"F/ 2"R V8 F-Body 1.4"F/ 1.4R V8 F-Body 1.2"F/ 1.7"R V6 F-Body 1.4"F/ 1.4R V6 F-Body 1.2"F/ 1.7"R Grand Prix VEHICLE DATA A-Body 0"F/ 0"R A-Body 2"F/ 2"R A-Body 0"F/ 0"R A-Body 2"F/ 2"R GTO A-Body 2" A-Body 0"F/ 0"R A-Body 2"F/ 2"R A-Body 0"F/ 0"R A-Body 2"F/ 2"R LeMans A-Body 2" 2202 LOWERING COMPONENTS A-Body 0"F/ 0"R A-Body 2"F/ 2"R NOTES: LEAF SPRINGS 10

13 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: STREET PERFORMANCE SHOCK ABSORBERS SWAY BARS SWAYBAR 10102i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ia Apps. are for small block V8 RWD only. Leaf 10102i 2209ia springs sold separately. Order 2 to get pair. NOTE: Lower Control Arm modification maybe needed to fit front shock for all muscle car applications. NOTES: 10309h h i i n n n n n n n i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih i 2209ih C o l u m COMPLETE KITS PERFORMANCE HANDLING COMPLETE KITS NOTE: Lower Control Arm modification maybe needed to fit front shock for all muscle car applications NOTES All applications are designed for small block V8 RWD only. Leaf springs sold separately. Order 2 to get pair. All apps designed for V8 RWD only. Rear spring won't fit vehicles w/fact. equip. rear mono-leaf spring Apps. are for small block V8 RWD only. Leaf springs sold separately. Order 2 to get pair. All applications are designed for small block V8 RWD only. All applications are designed for small block V8 RWD only. All applications are designed for small block V8 RWD only. All applications are designed for small block V8 RWD only. All applications are designed for small block V8 RWD only. All applications are designed for small block V8 RWD only. COMPONENTS TRUCKS + SUVS MUSCLE CARS 11

14 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS MUSCLE CAR OVER APPLICATIONS YEAR VARIANT 1 VARIANT 2 E VARIANT CTS,CTS-V Camaro; Coupe / Convertible Camaro Corvette (C5) Coupe / Convertible Complete coilover kit Corvette (C6) Coupe / Convertible not Z06 Corvette; (Z06) Coupe Complete Coilover Kit Charger / Challenger / 300C / Magnum 6 & 8 Cyl Viper (SR, RT/10) with eye mounting at the rear axle Viper (R, SR, RT/10) GTS; RT/10 with fork mounting at the rear axle Viper (ZB) SRT-10 with fork mounting at the rear axle Mustang Mustang incl. GT - not Cobra Mustang incl. GT - not Cobra Mustang Cobra Mustang Cobra Mustang Cobra - only models with IRS Mustang Cobra - only models with IRS Mustang - Coupe + Convertible MODELS CADILLAC Coilover Applications CHEVROLET Coilover Applications DODGE Coilover Applications FORD Coilover Applications Mustang; (Mustang, -GT, -Shelby) 6cyl., 8cyl. Mustang; (Mustang, -GT, -Shelby) GT500 GALVANIZED BODY (Height adj. w/ PRE dampening) STAINLESS BODY (Height adj. w/ REBOUND dampening) STAINLESS BODY (Height adj. w/ REBOUND & ED COMPRESS. dampening) GT; (GT40) PONTIAC Coilover Applications GTO NOTES: NOTES Height adjustable on front and rear axles (threaded strut housings) Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs & dampers) Standard self levelling shock has to be replaced w/ the supplied sport shock. Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs & dampers) Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs & dampers) 12

15 Complete Performance Kits For TRUCKS + SUVs Belltech Complete Kits are an easy way to get all the necessary components you need to lower and make your truck/suv perform better. For 2011 Belltech has expanded the Complete Kits line to an even wider range of popular truck/suv applications. Our engineers focus on specifics of each vehicle to ensure the kit is perfectly matched to each individual application. Here are a few of the important details which make Belltech Kits truly Complete: Shocks designed specifically for vehicle Alignment Cams/Alignment Bushings included to bring your vehicle back to factory alignment specifications Our bump stops manufactured from OEM quality polyurethane foam, provide proper absorption and compression rates, while maintaining load capacities Ordering a Truck / SUV Complete Kit is presented in 3 stages: Stage 1 ordering with this number will provide the Complete Kit WITHOUT shock absorbers Stage 2 (adding the letters ND to Stage 1) INCLUDES 4 Nitro Drop 2 shock absorbers with your Complete Kit Stage 3 (adding the letters SP to Stage 1) INCLUDES 4 Street Performance shock absorbers with your Complete Kit COMPONENTS TRUCKS + SUVS MUSCLE CARS 13

16 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 CHEVROLET / GMC Colorado/Canyon Applications WITH SP SHOCK SHOCK 0" 2" IF NA NA " or 2" 3" SP IF NA NA 1" or 2" 2" SP IF NA NA " or 2" 3" SP IF NA NA " 3" SP IF NA NA " 3" IF NA NA " 4" SP IF NA NA " or 4" 5" SP IF NA NA " 2" IF NA NA 8530 Colorado / Canyon 1" or 2" 3" SP IF NA NA Ext. & Quad Cab 1" or 2" 2" SP IF NA NA 8530 Z85 Suspension 1" or 2" 3" SP IF NA NA 8530 Coil spring equipped 2" 3" SP IF NA NA 8530 Colorado / Canyon Cabs w/ ZQ8 Susp. 2" 3" IF NA NA " 4" SP IF NA NA " or 4" 5" SP IF NA NA " 2" SP IF NA NA 8530 CHEVROLET / GMC S-Series 2WD Applications S10-Extreme - Std. Cab 2" 2" ND 612SP i 2412IF S10-Extreme - Ext. Cab 2" 2" ND 613SP i 2412IF Colorado / Canyon Std. Cab Z85 Suspension Coil spring eqipped trucks only trucks only S10 / S15 Std. Cab Pickup Only 4 Cylinder S10 / S15 Ext. Cab Pickup Only 4 Cylinder S10 / S15 Std. Cab Pickup Only 6 Cylinder DESIRED LOWERING * Kits with SP front struts can add 0-1" lowering range - adjustable in 1/2" increments #25005 front strut offers 0 to 1" lowering in 1/2" increments. 2" 2" ND 612SP i 2412IF " 3" ND 614SP i 2412IF " or 3" 3" ND 630SP i 2412IF " or 3" 4" ND 568SP i 2410IF " or 5" 5" ND 616SP i 2410IF " 2" ND 613SP i 2412IF " 3" ND 617SP i 2412IF " or 3" 3" ND 618SP i 2412IF " or 3" 4" ND 568SP i 2410IF " or 5" 5" ND 619SP i 2410IF " 2" SND 612SP i 2412IF " 3" ND 614SP i 2412IF " or 3" 3" ND 650SP i 2412IF " or 3" 4" ND 574SP i 2410IF " or 5" 5" ND 620SP i 2410IF " 2" ND 613SP i 2412IF " 3" ND 617SP i 2412IF S10 / S15 2" or 3" 3" ND 621SP i 2412IF Ext. Cab Pickup Only 2" or 3" 4" SND 574SP i 2410IF Cylinder " or 5" 5" ND 622SP i 2410IF " 2" ND 612SP i 2412IF " 3" ND 614SP i 2412IF S10 / S15 Pickup 2" or 3" 3" ND 630SP i 2412IF Std. Cab Pickup Only 2" or 3" 4" ND 568SP i 2410IF & 6 Cylinder 14 4" or 5" 5" ND 616SP i 2410IF

17 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS SHACKLE SHACKLE HANGER KITS CHEVROLET / GMC Colorado/Canyon Applications * * * * * 6210 SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES 2103 * * * * * * * * * * * * 6110 * Kits with SP front struts can add 0-1" lowering range - adjustable in 1/2" increments #25005 front strut offers 0 to 1" lowering in 1/2" increments. CHEVROLET / GMC S-Series 2WD Applications We recommend using a C-Section kit for additional travel We recommend using a C-Section kit for additional travel When lowering the rear of an S10/S15 4"-6" you must check that yoke is properly positioned in the trans. The rear trans. seal must be in original position on the yoke. When lowering the rear of an S10/S15 4"-6" you must check that yoke is properly positioned in the trans. The rear trans. seal must be in original position on the yoke. When lowering the rear of an S10/S15 4"-6" you must check that yoke is properly positioned in the transn. The rear trans. seal must be in original position on the yoke. COMPONENTS TRUCKS + SUVS MUSCLE CARS When lowering the rear of S10/S15 4"-6" you must check that yoke is properly positioned in the trans. The rear trans. seal must be in original position on yoke When lowering the rear of S10/S15 4"-6" you must check that yoke is properly positioned in the trans. The rear trans. seal must be in original position on yoke 15

18 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 WITH SP CHEVROLET / GMC S-Series 2WD Applications - continued S-10 Blazer / Jimmy 6 Cylinder S-10 Blazer Extreme 6 Cylinder SHOCK SHOCK 2" 2" ND 613SP i 2412IF " 3" ND 617SP i 2412IF " or 3" 3" ND 618SP i 2412IF " or 5" 5" ND 619SP i 2410IF " 2" ND 624SP i 2412IF " 3" ND 625SP i 2412IF " or 5" 3" ND 626SP i 2412IF " or 3" 3" ND 627SP i 2412IF " or 3" 4" ND 569SP i 2410IF " or 5" 5" ND 628SP i 2410IF " 2" ND 624SP i 2412IF " 3" ND 625SP i 2412IF " 2" ND 612SP i 2412IF " 3" ND 614SP i 2412IF " or 3" 3" ND 630SP i 2412IF " or 3" 3" ND 630SP i 2412IF S-10 Blazer / Jimmy 2" or 3" 4" ND 570SP i 2410IF Cylinder 4" or 5" 5" ND 631SP i 2410IF " 2" ND 612SP i 2412IF " 3" ND 614SP i 2412IF S-10 Blazer / Jimmy 2" or 3" 3" ND 650SP i 2412IF Cylinder 2" or 3" 4" ND 573SP i 2410IF " or 5" 5" ND 633SP i 2410IF " 2" ND 612SP i 2412IF " 3" ND 614SP i 2412IF " or 3" 3" ND 630SP i 2412IF " or 3" 3" ND 630SP i 2412IF S-10 Blazer / Jimmy 2" or 3" 4" ND 568SP i 2410IF & 6-Cylinder DESIRED LOWERING S10 / S15 Pickup 2" or 3" 3" ND 618SP i 2412IF Ext. Cab Pickup Only 2" or 3" 4" ND 568SP i 2410IF & 6 Cylinder " 3" ND 632SP i 2412IF " or 5" 5" ND 616SP i 2410IF CHEVROLET / GMC S-Series 4WD Applications S-10 / S-15 1" to 3" Adj. 2" ND 635SP DD 2412IF Pickup Blazer 1" to 3" Adj. 3" ND 636SP DD 2412IF (Exc. ZW-7 Option) 1" to 3" Adj. 3" ND 637SP DD 2410IF " to 3" Adj. 2" ND 635SP DD 2412IF S-10 / S-15 Blazer 1" to 3" Adj. 3" ND 636SP DD 2412IF " to 3" Adj. 3" ND 638SP DD 2410IF Typhoon 1" or 2" 2" ND 635SP DD 2412IF Syclone 1" or 2" 2" ND 635SP DD 2412IF

19 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE SHACKLE HANGER KITS CHEVROLET / GMC S-Series 2WD Applications - continued SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES CHEVROLET / GMC S-Series 4WD Applications Blazers 2-Door models use Door models use Do not lower vehicle front more than 3" Do not lower vehicle front more than 3" When lowering the rear of S10/S15 4"-6" you must check that yoke is properly positioned in the trans. The rear trans. seal must be in original position on yoke When lowering the rear of S10/S15 4"-6" you must check that yoke is properly positioned in the trans. The rear trans. seal must be in original position on yoke. When lowering the rear of an S10/S15 4"-6" you must check that yoke is properly positioned in the trans. The rear trans. seal must be in original position on the yoke. For Ext. Cab apps use Lowering Blocks #6202 (3"drop w/ 2 taper) or #6102 (2" block w/ 2 taper) When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the trans. The rear tran. seal must be in the original position on the yoke. When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke. COMPONENTS TRUCKS + SUVS MUSCLE CARS 17

20 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 CHEVROLET / GMC Full-size Truck 2WD Applications 1/2-TON FULL SIZE TRUCK & 07 CLASSIC & 07 CLASSIC 1/2 Ton Silverado/Sierra Standard Cab Short Bed 1/2 Ton Silverado, Sierra, Denali Ext. Cab OR Crew Cab only WITH SP SHOCK SHOCK 0" 2" or 3" FF NA " 2" or 3" SP FF NA " or 2" 2" or 3" SP FF NA " 4" SP FF NA " or 2" 4" SP FF NA " or 4" 5" or 6" SP FF NA " or 4" 7" SP FF NA " to -2" 2" or 3" 645SP FF NA " to -2" 4" 646SP FF NA " to -4" 5" or 6" 647SP FF NA " to -4" 7" 648SP FF NA " 2" or 3" FF NA " 2" or 3" SP FF NA " or 2" 2" or 3" SP FF NA " 4" SP FF NA " or 2" 4" SP FF NA " or 4" 5" or 6" SP FF NA " to -2" 2" or 3" 645SP FF NA " to -2" 4" 646SP FF NA " to -4" 5" or 6" 647SP FF NA 8510 * When using kits with SP front struts on Chevrolet/GM platforms noted by the *, you can add from a 2" lift to 2" lowering to the height range to the maximum of +2 to -4" adjustible in 1/2" increments 1/2 Ton Silverado Sierra Standard Cab Short Bed (with Factory Front torsion bar) 1/2 Ton Silverado Extended Cab Short Bed Only (with Fact. Front torsion bar) DESIRED LOWERING 0" 2" FF " 3" ND 946SP FF " 3" FF " or 2" 3" FF " or 2" 4" ND 654SP FF " 4" ND 655SP FF " or 4" 4" ND 656SP FF " or 4" 6" ND 657SP FF " 2" FF " 3" ND 947SP FF " 3" FF " or 2" 3" FF " or 2" 4" ND 659SP FF " 4" ND 948SP FF " or 4" 4" ND 661SP FF & 07 CLASSIC 3" or 4" 6" ND 662SP FF " 2" I 2212FF " 3" ND 653SP I 2212FF " 3" I 2212FF /2-TON Silverado 2" or 3" 3" ND 663SP I 2212FF Sierra Std. Cab 2" or 3" 4" ND 664SP I 2212FF short bed only (with factory front coil spring) 3" 4" ND 949SP FF 4" or 5" 6" ND 667SP I 2209FF I & 07 CLASSIC 1/2-TON Silverado Ext. Cab short bed only (with factory front coil spring) 4" or 5" 6" or 7" ND 668SP I 2209FF " 2" I 2212FF " 3" ND 658SP I 2212FF " 3" I 2212FF " or 3" 3" I 2212FF " or 3" 3" ND 950SP I 2212FF " or 3" 4" ND 670SP I 2212FF " or 5" 6" ND 671SP I 2209FF " or 5" 6" or 7" ND 672SP I 2209FF

21 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS SHACKLE 2509 * 6401 SHACKLE HANGER KITS CHEVROLET / GMC Full-size Truck 2WD Applications SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES * 6401 Remove stock block for more lowering * 6401 Remove stock block for more lowering 2509 * Min. wheel size 17" * * 6521 Min. wheel size 17" * 6522 * 6401 Remove stock block for more lowering * * 6521 Min. wheel size 17" 2509 * 6522 * 6401 Remove stock block for more lowering 2509 * 6401 Min. wheel size 17" Remove stock block for more lowering * 6401 Remove stock block for more lowering 2509 * Min. wheel size 17" * * 6521 Min. wheel size 17" * 6401 Remove stock block for more lowering * * 6521 Min. wheel size 17" We reco a C-Section kit for more travel Recommend C-Section kit for more travel Min. wheel size 17" Remove stock block for more lowering * When using kits with SP front struts on Chevrolet/GM platforms noted by the *, you can add from a 2" lift to 2" lowering to the height range to the maximum of +2 to -4" adjustible in 1/2" increments Min. wheel size 17" Min. wheel size 17" We reco a C-Section kit for more travel Min. wheel size 17" Use flip kit #6612 for trucks w/ 5" frame ht. measured at rear bump stop Min. wheel size 17" Min. wheel size 17" Recommend C- Section kit for more travel Min. wheel size 17". Use flip kit # 6614 for trucks w/ 5" frame ht. measured at rear bump stop Min. wheel size 17" Recommend C-Section kit for more travel COMPONENTS TRUCKS + SUVS MUSCLE CARS Min. wheel size 17" We Recommend a C-Section kit for additional travel Recommend C-Section kit for more travel Min. wheel size 17" Use flip kit #6612 for trucks w/ 5" frame ht. measured atrear bump stop Min. wheel size 17" Min. wheel size 17" Use flip kit # 6614 for trucks w/ 5" frame ht. measured at rear bump stop 19

22 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL 1/2-TON Silverado / Sierra Crew Cab (4DR) DESIRED LOWERING COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 WITH SP CHEVROLET / GMC Full-size Truck 2WD Applications - continued 1/2-TON FULL SIZE TRUCK - cont & 07 CLASSIC & & 07 CLASSIC Silverado SS 1500 (2WD & AWD) GMC Sierra C3 Sierra Denali Extended Cab Only GMC Sierra Denali Crew Cab (4DR) only 1/2-TON Silverado Standard Cab Short Bed Only 1/2-TON Silverado Extended Cab Short Bed Only SHOCK SHOCK 0" 2" I 2212FF " 4" or 5" ND 673SP I 2212FF " 4" or 5" ND 674SP I 2212FF " or 5" 6" ND 675SP I 2209FF " or 5" 6" or 7" ND 676SP I 2209FF " 2" FF " 2" ND 677SP FF " 2" ND 678SP FF " 2" FF " 2" ND 677SP FF " 2" ND 678SP FF " 4" ND 655SP FF " 2" FF " 2" ND 677SP FF " 2" ND 678SP FF " 4" or 5" ND 679SP FF " 2" I 2212FF " 3" ND 653SP I 2212FF " 3" I 2212FF " or 3" 3" I 2212FF " or 3" 3" ND 663SP I 2212FF " 4" ND 948SP I 2212FF " or 3" 4" ND 664SP I 2212FF " 4" ND 949SP I 2212FF " or 5" 6" ND 665SP I 2209FF " or 5" 6" or 7" ND 669SP I 2209FF " 2" I 2212FF " 3" ND 658SP I 2212FF " 3" I 2212FF " or 3" 3" I 2212FF " or 3" 3" ND 950SP I 2212FF " 4" ND 660SP I 2212FF " or 3" 4" ND 670SP I 2212FF " or 5" 6" ND 680SP I 2209FF " or 5" 6" or 7" ND 681SP I 2209FF " 2" I 2214IF /2-Ton C-1500 Standard Cab Only ALL EXCEPT: Ext. Cab & SS 454 Coils rated for V8 engine only 2" 4" ND 685SP I 2214IF " 4" I 2214IF " 4" I 2214IF " or 3" 4" ND 686SP I 2214IF " 4" ND 687SP I 2214IF " or 5" 6" ND 688SP I 2212IF " or 5" 6" or 7" ND 689SP I 2212IF " 2" I 2214IF /2-TON C-1500 Ext. Cab only Coils rated for V8 engine only 2" 4" ND 690SP I 2214IF " 4" I 2214IF " 4" I 2214IF " or 3" 4" ND 691SP I 2214IF " 4" ND 692SP I 2214IF " or 5" 6" ND 693SP I 2212IF " or 5" 6" or 7" ND 694SP I 2212IF

23 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS SHACKLE 6400 SHACKLE HANGER KITS CHEVROLET / GMC Full-size Truck 2WD Applications SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES Recommend C-Section kit for more travel. Adjustable rear spring hanger. Recommend C-Section kit for more travel. Adjustable rear spring hanger. Min. wheel size 17" Min. wheel size 17" Recommend C-Section kit for more travel Recommend C-Section kit for more travel Min. wheel size 17" Min. wheel size 17" Min. wheel size 17" Min. wheel size 17" Min. wheel size 17" Recommend C- Section kit for more travel Min. wheel size 17" Recommend C- Section kit for more travel Min. wheel size 17" Use flip kit #6612 for trucks w/ 5" frame h.t measured at rear bump stop Min. wheel size 17" Min. wheel size 17" Recommend C- Section kit for more travel Min. wheel size 17" Use flip kit # 6614 for trucks with 5" frame ht. measured at rear bump stop For trucks w/o O.E. front sway bar order adapter kit # 5700 For trucks w/o O.E. front sway bar order adapter kit # Highly recommend a Belltech AirJack Kit For trucks w/o O.E. front sway bar order adapter kit # 5700 COMPONENTS TRUCKS + SUVS MUSCLE CARS For trucks w/o O.E. front sway bar order adapter kit # Highly recommend a Belltech AirJack Kit For trucks w/o O.E. front sway bar order adapter kit # 5700 For trucks w/o O.E. front sway bar order adapter kit # Highly recommend a Belltech AirJack Kit must use Alignment Kit #

24 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL /4-TON FULL SIZE TRUCK & /2-TON C-1500 Standard Cab only ALL EXCEPT: Ext. Cab & SS 454 Coils rated for V8s only DESIRED LOWERING COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 WITH SP CHEVROLET / GMC Full-size Truck 2WD Applications - continued /2-TON C-10/R10 Pickups 1" Rotor (coils rated for small block eng.) /2-TON C-1500 SS-454 Only 1/2-TON C-10/R10 Pickups 1-1/4" Rotor (coils rated for small block eng.) 1/2-TON C-Pickup (coils rated for small block eng.) 1/2-TON C-Pickup (coils rated for small block eng.) 1500 HD 2WD/4WD (8 lug rims 6 hole factory hanger) 5" drop 2WD only 2500 HD 2WD/4WD (8 lug rims 6 hole factory hanger) 5" drop 2WD only SHOCK SHOCK 0" 2" I 2214IF " 4" ND 695SP I 2214IF " 4" I 2214IF " 4" I 2214IF " or 3" 4" ND 686SP I 2214IF " 4" ND 951SP I 2214IF " or 5" 6" ND 696SP I 2212IF " or 5" 6" or 7" ND 697SP I 2212IF " 2" I 2214IF " or 3" 4" ND 698SP I 2214IF " 4" ND 699SP I 2214IF " 4" I 2214IF " 4" I 2214IF " 4" ND 700SP I 2214IF " or 5" 6" ND 701SP I 2212IF " or 5" 6" ND 701SP I 2212IF " or 5" 6" or 7" ND 702SP I 2212IF " 1" HA 2212HF " 4" ND 703SP HA 2208HF " 4" ND 704SP HA 2208HF " 6" ND 705SP HA 2208HF " 1" HA 2212HF " 4" ND 703SP HA 2208HF " 4" ND 706SP HA 2208HF " 6" ND 707SP HA 2208HF " 2" ND 951SP HA 2208AA " 3" or 4" ND 710SP HA 2208AA " 3" or 4" HA 2208AA " 5" ND 709SP HA 2208AA " 2" ND 951SP HA 2208AA " 3" or 4" ND 710SP HA 2208AA " 3" or 4" HA 2208AA " 5" ND 952SP HA 2208AA " 3" H 2211FF " 4" ND 682SP H 2211FF " or 2" 4" ND 683SP H 2211FF " or 4" 5" ND 684SP H 2210FF " 3" H 2211FF " 4" ND 682SP H 2211FF " 4" ND 683SP H 2211FF " 5" ND 684SP H 2210FF NOTES: 22

25 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE 6400 SHACKLE HANGER KITS CHEVROLET / GMC Full-size Truck 2WD Applications - continued SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES For trucks w/o O.E. front sway bar order adapter kit # For trucks w/o O.E. front sway bar order adapter kit # must use Alignment Kit #4950. For trucks w/o O.E. front sway bar order adapter kit # Highly recommend a Belltech AirJack Kit must use Alignment Kit #4950. For trucks w/o O.E. front sway bar order adapter kit # 5700 For trucks w/o O.E. front sway bar order adapter kit # 5700 For trucks w/o O.E. front sway bar order adapter kit # must use Alignment Kit #4950. For trucks w/o O.E. front sway bar order adapter kit # Highly recommend a Belltech AirJack Kit must use Alignment Kit #4950. For trucks w/o O.E. front sway bar order adapter kit # 5704 For trucks w/o O.E. front sway bar order adapter kit # 5700 For trucks w/o O.E. front sway bar order adapter kit # 5704 For trucks w/o O.E. front sway bar order adapter kit # 5700 COMPONENTS TRUCKS + SUVS MUSCLE CARS NOTES: 23

26 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL 2500 HD 2WD/4WD (8 lug rim 8 hole factory hanger) 5" drop 2WD only 3/4 Ton & 1-Ton Single Rear Wheel 8-Lug Only & Crew Cab 3/4 Ton C-2500 Extended & Crew Cab Single Rear Wheel 8-Lug Only Old Body Style 3/4 Ton C-2500 Ext. Cab Single Rear Wheel 8-Lug Only DESIRED LOWERING COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 WITH SP CHEVROLET / GMC Full-size Truck 2WD Applications - continued 3/4-TON FULL SIZE TRUCK SHOCK SHOCK 0" 3" H 2211FF " 4" or 5" ND 712SP H 2210FF " 4" or 5" ND 713SP H 2210FF " 5" ND 714SP H 2210FF " 2" I 2214IF " or 2" 4" ND 715SP I 2214IF " 4" ND 716SP I 2214IF " or 5" 8" ND 717SP I 2212IF " 2" I 2214IF " or 2" 4" ND 718SP I 2214IF " 4" ND 719SP I 2214IF " or 5" 8" ND 717SP I 2212IF " 2" I 2214IF " or 2" 4" ND 720SP I 2214IF " 4" ND 721SP I 2214IF " or 5" 8" ND 722SP I 2212IF " 2" H 2214IF " or 3" 4" ND 698SP H 2214IF /4-Ton C-2500 ALL EXCEPT: 8-LUG 2" 4" ND 699SP I 2214IF " 4" ND 700SP I 2214IF " or 5" 6" ND 701SP I 2212IF " or 5" 6" or 7" ND 702SP I 2212IF

27 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE 6403 SHACKLE HANGER KITS CHEVROLET / GMC Full-size Truck 2WD Applications - continued SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES Must use Pinion Shim Kit #4975. For trucks w/o O.E. front swaybar order adapter kit # 5700 Not designed for diesel applications. For increased suspension travel use #6911 C-Section Frame Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 For increased suspension travel use #6911 C-Section Frame Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Not designed for diesel applications Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Must use Pinion Shim Kit #4975. For trucks w/o O.E. front swaybar order adapter kit # 5700 Not designed for diesel applications For increased suspension travel use #6911 C-Section Frame Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 For increased suspension travel use #6911 C-Section Frame Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Not designed for diesel applications Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Must use Pinion Shim Kit #4975. For trucks w/o O.E. front swaybar order adapter kit # 5700 Not designed for diesel applications For increased suspension travel use #6911 C-Section Frame Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 COMPONENTS TRUCKS + SUVS MUSCLE CARS For increased suspension travel use #6911 C-Section Frame Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Not designed for diesel applications Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Must use Pinion Shim Kit #4975. For trucks w/o O.E. front swaybar order adapter kit # 5700 Not designed for diesel apps. 4" Ext. Cab must use # " Ext. Cab must use #4985 driveline alignment kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Not designed for diesel apps. 4" Ext. Cab must use # " Ext. Cab must use #4985 driveline alignment kit. For trucks w/o O.E. front swaybar order adapter kit # Highly recommend a Belltech AirJack Kit must use alignment kit #

28 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 WITH SP CHEVROLET / GMC Full-size Truck 2WD Applications - continued 1-TON TRUCKS HD Dually Ext.Cab 2WD/AWD; (8 lug rim 10 hole factory hanger) 5" drop 2WD only 1-TON WHEEL 8-LUG. 1-TON C-3500 Standard / Ext. Cab & Dually DESIRED LOWERING SHOCK SHOCK 0" 3" H 2211FF " 3" or 4" ND 723SP H 2211FF " 3" or 4" ND 724SP H 2211FF " 5" ND 725SP H 2210FF " 2" I 2214IF " or 2" 4" ND 715SP I 2214IF " 4" ND 716SP I 2214IF " or 5" 8" ND 717SP I 2212IF " 2" I 2214IF " or 2" 4" ND 718SP I 2214IF " 4" ND 719SP I 2214IF " or 5" 8" ND 717SP I 2212IF " 2" I 2214IF " or 2" 4" ND 715SP I 2214IF TON C-3500 Crew Cab and Dually (8' Bed) 3" 4" ND 716SP I 2214IF " or 5" 8" ND 717SP I 2212IF

29 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE 6403 SHACKLE HANGER KITS CHEVROLET / GMC Full-size Truck 2WD Applications - continued SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES For trucks w/o O.E. front swaybar order adapter kit # Not designed for diesel apps. For increased suspension travel use #6911 C-Section Frame Kit. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 For increased suspension travel use #6911 C-Section Frame Kit. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Must use Pinion Shim Kit #4975. For trucks w/o O.E. front swaybar order adapter kit # Not designed for diesel apps. For increased suspension travel use #6911 C-Section Frame Kit. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 For increased suspension travel use #6911 C-Section Frame Kit. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Must use Pinion Shim Kit #4975. For trucks w/o O.E. front swaybar order adapter kit # COMPONENTS TRUCKS + SUVS MUSCLE CARS Not designed for diesel apps. For increased suspension travel use #6911 C-Section Frame Kit. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # For increased suspension travel use #6911 C-Section Frame Kit. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit #

30 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 WITH SP CHEVROLET / GMC Full-size Truck 2WD Applications - continued 1-TON TRUCKS TON C-3500 Crew Cab 1-TON C-3500 Extended Cab & Dually 1-TON C-3500 Extended Cab & Dually DESIRED LOWERING SHOCK SHOCK 2" I 2214IF " or 2" 4" ND 720SP I 2214IF " 4" ND 721SP I 2214IF " or 5" 8" ND 722SP I 2212IF " 2" I 2214IF " 4" ND 721SP I 2214IF " 2" I 2214IF " 4" ND 721SP I 2214IF " or 5" 8" ND 722SP I 2212IF " 2" I 2214IF " 4" ND 726SP I 2214IF TON C-3500 Ext. Cab & Dually 4" or 5" 8" ND 727SP I 2212IF TON C-30 Crew Cab & Dually Only NOTES: 0" 1" 3" 4" ND 728SP HA 2209IF " 4" ND 967SP HA 2209IF

31 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE 6400 SHACKLE HANGER KITS CHEVROLET / GMC Full-size Truck 2WD Applications - continued SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES Must use Pinion Shim Kit #4975. For trucks w/o O.E. front swaybar order adapter kit # Not designed for diesel apps. For increased suspension travel use #6911 C-Section Frame Kit. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 For increased suspension travel use #6911 C-Section Frame Kit. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front swaybar order adapter kit # 5700 Must use Pinion Shim Kit #4975. For trucks w/o O.E. front sway bar order adapter kit #5700. For increased suspension travel use #6911 C-Section Frame Kit. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front sway bar order adapter kit #5700. Must use Pinion Shim Kit #4975. For trucks w/o O.E. front sway bar order adapter kit #5700. For increased suspension travel use #6911 C-Section Frame Kit. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front sway bar order adapter kit #5700. Not designed for diesel apps must use Alignment Kit # rear axle saddle must be welded inplace. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front sway bar order adapter kit #5700. Must use Pinion Shim Kit #4975. For trucks w/o O.E. front sway bar order adapter kit #5700. For increased suspension travel use #6911 C-Section Frame Kit. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front sway bar order adapter kit #5700. COMPONENTS TRUCKS + SUVS MUSCLE CARS Not designed for diesel apps must use Alignment Kit # rear axle saddle must be welded inplace. Highly recommend a Belltech AirJack Kit. For trucks w/o O.E. front sway bar order adapter kit # Not designed for diesel applications. NOTES: 29

32 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 CHEVROLET / GMC Full-size Truck 4WD Applications WITH SP SHOCK SHOCK 0" 2" or 3" FF NA " 2" or 3" SP FF NA " 4" SP FF NA " to -2" 2" or 3" 645SP FF NA " to -2" 4" 646SP FF NA 8504 * When using kits with SP front struts on the Chevrolet / GM platforms noted by the *, you can add from a 2" lift to 2" lowering to the height range to the maximum of +2 to - 4", which is adjustable in1/2" incremen 1/2-TON Silverado Std. 0" 2" FF & Ext. Cab short bed 2" 2" ND 678SP FF Chevrolet / GMC 0" 2" GD 2214IF /2 Ton Pickup 1" or 3" 2" ND 729SP GD 2212IF (Std. and Ext. cab) 1" or 3" 4" ND 730SP GD 2214IF CHEVROLET / GMC SUV 2WD Applications TRAIL BLAZER, ENVOY, SSR Trail Blazer/ GMC Envoy 2" 3" SP DG NA WD-4WD +1" to -2" 3" 796SP DG NA " OEM DG NA " to -1.5" OEM DG NA SSR 1.5" 2" SP DG NA " to -2" 2" 796SP DG NA 8532 TAHOE, YUKON, SUBURBAN, AVALANCHE & BLAZER, JIMMY /2-TON Silverado / Sierra / Sierra Denali All Cabs SS Trail Blazer Tahoe / Yukon / Suburban / Yukon XL With Factory Autoride Shocks Tahoe / Yukon Without Factory Autoride shocks Suburban / Yukon XL Without Factory Autoride Shocks Chevy Avalanche Without Factory Autoride shocks Tahoe, Yukon, Yukon XL & Suburban With Factory Premium Ride Shocks DESIRED LOWERING 0" 2" FF NA " or 2" 3" or 4" SP FF NA " 3" or 4" SP FF NA " or 4" 3" or 4" SP FF NA " or 2" 3" or 4" SP FF NA " 3" or 4" SP FF NA " or 4" 3" or 4" SP FF NA " to -2" 2" 737SP FF NA " to -2" 3" or 4" 738SP FF NA " to -4" 3" or 4" SP FF NA " or 2" 3" or 4" SP FF NA " 3" or 4" SP FF NA " or 4" 3" or 4" SP FF NA " to -2" 1" or 2" 749SP FF NA " to -2" 3" or 4" 752SP FF NA " to -4" 3" or 4" SP FF NA " or 2" 2" or 3" SP FF NA " 2" or 3" SP FF NA " or 4" 4" or 5" SP FF NA " to -2" 2" or 3" 749SP FF NA " to -4" 4" or 5" SP FF NA " 2" or 3" FF " or 2" 2" or 3" ND 757SP FF " 2" or 3" ND 759SP FF Tahoe, Yukon, Yukon XL & Suburban Without Factory Premium Ride Shocks 0" 1" or 2" FF " or 2" 1" or 2" ND 760SP FF " or 2" 3" or 4" ND 757SP FF " 3" or 4" ND 759SP FF Chevy Avalanche Z66 With Factory Premium Ride Shocks 0" 2" or 3" FF " or 2" 2" or 3" ND 757SP FF " 2" or 3" ND 759SP FF * When using kits with SP front struts on the Chevrolet / GM platforms noted by the *, you can add from a 2" lift to 2" lowering to the height range to the maximum of +2 to - 4", which is adjustable in1/2" increments.

33 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE * * 6401 SHACKLE HANGER KITS CHEVROLET / GMC Full-size Truck 4WD Applications SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES Min. wheel size 17". Remove stock block for additional lowering * Min. wheel size 17". * 6401 Remove stock block for add'l lowering. * * When using kits with SP front struts on the Chevrolet / GM platforms noted by the *, you can add from a 2" lift to 2" lowering to the height range to the maximum of +2 to - 4", which is adjustable in1/2" increments Min. wheel size 17" CHEVROLET / GMC SUV 2WD Applications 4207 * * * 4230 * 4207 * 4230 * 4230 * * * * * * * * 5321 * * Min. wheel size 17" * * * * * * Min. wheel size 17" * * * * * Min. wheel size 17" Do not lower front of vehicle more than 3" When replacing factory AutoRide electronic dampers, check engine code may appear. Call for details Min. wheel size 17". When replacing factory AutoRide electronic dampers, check engine code may appear. Call for details Min. wheel size 17". Min. wheel size 17". Min. wheel size 17". Springs are designed to be used with Premium Ride Suspension only. Min. wheel size 17". Springs are designed to be used with Premium Ride Suspension only. Springs are designed to be used with Belltech shocks only. Min. wheel size 17".Springs are designed to be used with Belltech shocks only. Springs are designed to be used with Premium Ride Suspension only. Min. wheel size 17". Springs designed are to be used with Premium Ride Suspension only. * When using kits with SP front struts on the Chevrolet / GM platforms noted by the *, you can add from a 2" lift to 2" lowering to the height range to the maximum of +2 to - 4", which is adjustable in1/2" increments. COMPONENTS TRUCKS + SUVS MUSCLE CARS 31

34 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 YEAR MODEL WITHOUT WITH ND2 WITH SP TAHOE, YUKON, SUBURBAN, AVALANCHE & BLAZER, JIMMY -continued Chevy Avalanche Z66 Without Factory Premium Ride Shocks (Including Z71) Suburban 1/2-TON 2WD Suburban 3/4 TON 2WD Suburban 1/2-TON 2WD Suburban 3/4-TON 2WD (6 LUG) Tahoe / Yukon 4 Door Only Tahoe / Yukon 2 Door Only DESIRED LOWERING SHOCK SHOCK 0" 2" or 3" FF " 2" or 3" ND 761SP FF " or 2" 2" or 3" ND 760SP FF " 4" or 5" ND 759SP FF " or 4" 4" or 5" ND 781SP FF " or 2" 4" or 5" ND 757SP FF " 3" or 4" ND 759SP FF " 4" ND 782SP I 2412IF " 4" ND 783SP I 2412IF " or 5" 7" ND 784SP I 2209IF " 3" ND 798SP I 2412IF " or 3" 3" ND 788SP I 2412IF " 4" ND 786SP I 2412IF " or 5" 7" I 2209IF " 4" ND 782SP I 2412IF " or 3" 4" ND 783SP I 2412IF " 4" ND 786SP I 2412IF " or 5" 7" ND 787SP I 2209IF " 3" ND 798SP I 2412IF " or 3" 3" ND 788SP I 2412IF " 4" ND 786SP I 2412IF " or 5" 7" ND 789SP I 2209IF " 2" I 2412IF " or 3" 2" ND 790SP I 2412IF " or 3" 4" ND 791SP I 2412IF " 4" ND 792SP I 2412IF " or 3" 3.5" ND 793SP I 2412IF " 3.5" I 2412IF " or 5" 5.5" ND 794SP I 2209IF /2-TON Blazer / Jimmy 1" Rotor Coils rated for V8 0" 1" HA 2212HF " 6" ND 956SP HA 2208HF /2-TON Blazer / Jimmy 1-1/4" Rotor Coils rated for V8 0" 1" HA 2212HF " 6" HA 2208HF " 1" HA 2212HF Suburban 1/2 Ton 1-1/4" Rotor Coils rated for V8 4" 6" HA 2208HF

35 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE SHACKLE HANGER KITS SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES Springs are designed to be used with Belltech shocks only. Min. wheel size 17". Springs are designed to be used with Belltech shocks only. Springs are designed to be used with Belltech shocks only. Springs designed to be used with Belltech shocks only. Min. wheel size 17". Springs designed to be used with Belltech shocks only Belltech AirJack Kit is recommended Min. wheel size 17". Springs designed to be used with Belltech shocks only. Sway bars only fit eqipped w/ O.E. rear sway bar mounts. For trucks w/o O.E. front sway bar order adapter kit # 5700 Sway bars only fit eqipped w/ O.E. rear sway bar mounts. For trucks w/o O.E. front sway bar order adapter kit # Sway bars only fit eqipped w/ O.E. rear sway bar mounts. For trucks w/o O.E. front sway bar order adapter kit # Sway bars only fit eqipped w/ O.E. rear sway bar mounts. For trucks w/o O.E. front sway bar order adapter kit # Not designed for diesel apps. Sway bars only fit eqipped w/ O.E. rear sway bar mounts. For trucks w/o O.E. front sway bar order adapter kit # must use Alignment Kit #4950. Sway bars only fit eqipped w/ O.E. rear sway bar mounts. For trucks w/o O.E. front sway bar order adapter kit # must use Alignment Kit #4950. Sway bars only fit eqipped w/ O.E. rear sway bar mounts. For trucks w/o O.E. front sway bar order adapter kit # Tahoe flip kits require an Experienced Install. Call for Details. For trucks w/o O.E. front sway bar order adapter kit # 5701 COMPONENTS TRUCKS + SUVS MUSCLE CARS Fits 3" axle housings only. Rear leaf springs require 2" re-arch for proper clearance. For trucks w/o O.E. front sway bar order adapter kit # 5701 For trucks w/o O.E. front sway bar order adapter kit # 5701 Fits 3" axle housings only. Rear leaf springs require 2" re-arch for proper clearance. For trucks w/o O.E. front sway bar order adapter kit # 5701 For trucks w/o O.E. front sway bar order adapter kit # 5701 Fits 3" axle housings only. Rear leaf springs require 2" re-arch for proper clearance. On 81-87s, 1" thick brake rotors get Spindle #3200; 1.25" use #3100. For trucks w/o O.E. front sway bar order adapter kit #

36 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL Escalade, Denali, Tahoe, Suburban Equipped WITH factory Autoride DESIRED LOWERING COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 CADILLAC / CHEVROLET / GMC SUV 4WD Applications Escalade/Denali WITH Factory AutoRide Shocks Tahoe, Yukon, Suburban, Yukon XL & Avalanche WITH Factory AutoRide Shocks (* front adj. in 1/2" increments) Tahoe/Yukon WITHOUT Factory AutoRide Shocks (* front adj. in 1/2" increments) Suburban/Yukon XL WITHOUT Factory AutoRide Shocks (* front adj. in 1/2" increments) Chevy Avalanche WITHOUT Factory AutoRide Shocks (* front adj. in 1/2" increments) Tahoe, Yukon, Suburb., Yukon XL WITH Factory Premium Ride Shocks - must run Shock Extent. WITH SP SHOCK SHOCK 2" 3" or 4" SP FF NA " or 2" 3" or 4" SP FF NA " to -2" 3" or 4" 752SP FF NA " to -4" 3" or 4" SP FF NA " 3" or 4" SP FF NA " or 2" 3" or 4" SP FF NA " to -2" 3" or 4" 752SP FF NA " to -4" 3" or 4" SP FF NA " 3" or 4" SP FF NA " or 2" 3" or 4" SP FF NA " to -2" 2" 737SP FF NA " to -2" 3" or 4" 738SP FF NA " to -4" 3" or 4" SP FF NA " 3" or 4" SP FF NA " or 2" 3" or 4" SP FF NA " to -2" 1" or 2" 749SP FF NA " to -2" 3" or 4" 744SP FF NA " to -4" 3" or 4" SP FF NA " 2" or 3" SP FF NA " or 2" 2" or 3" SP FF NA " or 4" 4" or 5" SP FF NA " to -2" 2" or 3" 749SP FF NA " to -4" 4" or 5" SP FF NA 8522 * When using kits with SP front struts on the Chevrolet / GM platforms noted by the *, you can add from a 2" lift to 2" lowering to the height range to the maximum of +2 to - 4", which is adjustable in1/2" increments. 1" or 3" 2" or 3" ND 757SP FF " 2" or 3" ND 759SP FF " or 2" 2" or 3" ND 757SP FF " 2" or 3" ND 759SP FF Tahoe, Yuko, Suburban, Yukon XL WITHOUT Fact. Premium Ride Shocks Chevy Avalanche Z66 WITH Factory Premium Ride Shocks 1" or 2" 1" or 2" ND 760SP FF " or 2" 3" or 4" ND 757SP FF " 3" or 4" ND 759SP FF " or 2" 1" or 2" ND 760SP FF " or 2" 2" or 3" ND 757SP FF " 2" or 3" ND 759SP FF NOTES: 34

37 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE SHACKLE HANGER KITS CADILLAC / CHEVROLET / GMC SUV 4WD Applications 2509 * * * * * * * * SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES Min. wheel size 17". When replacing factory Autoride electonic dampers, a check engine code may appear. Call for details. Min. wheel size 17". When replacing factory Autoride electonic dampers, a check engine code may appear. Call for details * Min. wheel size 17" * * 5321 * * * * * * 2509 * * * * Min. wheel size 17". * * Min. wheel size 17" When replacing factory Autoride electonic dampers, a check engine code may appear. Call for details. Min. wheel size 17". When replacing fact. Autoride electonic dampers, check engine code may appear. Call for details. When replacing factory Autoride electonic dampers, check engine code may appear. Call for details. Min. wheel size 17". Min. wheel size 17". * When using kits with SP front struts on the Chevrolet / GM platforms noted by the *, you can add from a 2" lift to 2" lowering to the height range to the maximum of +2 to - 4", which is adjustable in1/2" increments. Don't lower front of vehicle more than 3". When replacing factory Autoride electonic dampers, check engine code may appear. Call for details. When replacing factory Autoride electonic dampers, a check engine code may appear. Call for details. Min. wheel size 17". COMPONENTS TRUCKS + SUVS MUSCLE CARS Min. wheel size 17" Min. wheel size 17" Min. wheel size 17". NOTES: 35

38 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 WITH SP SHOCK CADILLAC / CHEVROLET / GMC SUV 4WD Applications - continued SHOCK Chevy WITHOUT Avalanche Factory 1" or 2" 2" or 3" ND 760SP FF Premium Ride Shocks 2" 2" or 3" ND 761SP FF Tahoe, Yukon, 1" or 3" 2" ND 729SP GD 2212IF Escalade & Denali 1" or 3" 3" ND 763SP GD 2412IF Door only 1" or 3" 4" ND 764SP GD 2412IF Suburban 1" or 3" 4" ND 729SP GD 2212IF K-1500 only 1" or 3" 4" ND 765SP GD 2412IF CHEVROLET / GMC VAN Applications DODGE Truck and SUV Applications DURANGO & DAKOTA 1" or 3" 4" ND 766SP GD 2412IF " or 3" 3.5" ND 767SP GD 2412IF " or 3" 3" ND 763SP GD 2412IF " or 3" 4" ND 764SP GD 2412IF " 3.5" ND 768SP I 2210DD " 3.5" ND 769SP I 2210DD " 3" I 2210DD " 3.5" ND 770SP I 2210DD " 2.5" ND 771SP I 2210DD " 2.5" ND 772SP I 2210DD Durango 2" 2" ND 800SP I 2212DD Dakota All Cabs (V8 Only) Tahoe, Yukon (2 door only) Blazer Full Size (4 door only) Astro & Safari Van 2-WD WITH factory steel leaf springs Astro & Safari Van 2-WD WITH factory composite leaf springs Dakota All Cabs (V6 Only) DESIRED LOWERING 2" 4" ND 801SP I 2212DD " 3" I 2212DD " 4" ND 802SP I 2212DD " 3" I 2212DD Dakota R/T 1" 2" ND 803SP I 2212DD Dakota Std. Cab only 2" 4" ND 804SP I 2210ID Coils rated for 2" 4" ND 808SP I 2210ID V8 engine only 4" 4" ND 806SP I 2210ID Dakota Std. Cab only 2" 4" ND 807SP I 2210ID Coils rated for 2" 4" ND 808SP I 2210ID V8 engine only 4" 4" ND 809SP I 2210ID NOTES: 36

39 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE SHACKLE HANGER KITS CADILLAC / CHEVROLET / GMC SUV 4WD Applications SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES Min. wheel size 17" CHEVROLET / GMC VAN Applications All except AWD models Astro Vans may Astro also Vans use may #5958 also leaf use spring # leaf spring for 3" drop. When using a All except All Wheel Drive" models DODGE Truck and SUV Applications Don't lower front of vehicle more than 3" Sway bars only fit vehicles equipped w/ O.E. rear sway bar mounts. Do not lower front of vehicle more than 3" Don't lower front of vehicle more than 3" Sway bars only fit vehicles equipped w/ O.E. rear sway bar mounts. Do not lower front of vehicle more than 3" All except AWD models Astro Vans may also use #5958 leaf spring for 3" drop. When using a flip kit on a sway bar equipped Astro, it's necessary to changethe sway bar to Belltech # 5528 All except AWD models. When using a flip kit on a sway bar equipped Astro, it's necessary to changethe sway bar to Belltech # 5528 When using a flip kit on a sway bar equipped Astro, it's necessary to changethe sway bar to Belltech # 5528 Trucks featuring lowered O.E.M. Sport Suspensions may not get spec. drop. For trucks without O.E. sway bar, order adapter kit # 5708 COMPONENTS TRUCKS + SUVS MUSCLE CARS NOTES: 37

40 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS 38 YEAR MODEL COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 WITH SP SHOCK SHOCK RAM 1500 TRUCK Ram Quad & Crew Cab 2" 4" ND 963SP 10103I 2212FF Ram Reg Cab 2" 4" ND 964SP 10103I 2212FF " 1.25" I 2215FF " 3" I 2212FF " 5" ND 810SP I 2212FF " 1.25" I 2215FF " 3" I 2212FF " 5" ND 811SP I 2212FF " 1.25" I 2215FF " 3" I 2212FF " 5" ND 812SP I 2212FF " 2" F 2212FF " 4" ND 813SP F 2212FF " 4" F 2212FF " or 3" 4" ND 814SP F 2212FF " 4" F 2212FF " 4" ND 815SP F 2212FF " or 5" 6" ND 816SP F 2209FF " or 5" 6" or 7" ND 817SP F 2209FF " 2" F 2212FF " 4" ND 818SP F 2212FF " 4" F 2212FF " or 3" 4" ND 819SP F 2212FF " 4" F 2212FF " 4" ND 820SP F 2212FF " or 5" 6" ND 821SP F 2209FF " or 5" 6" or 7" ND 822SP F 2209FF RAM 2500 & 3500 TRUCKS Dodge Ram " 2" F 2212FF V-10 & Diesel 3" 4" ND 823SP F 2212FF RANGER DODGE Truck and SUV Applications - continued Dodge Ram " 2" F 2212FF V-10 & Diesel 3" 4" ND 824SP F 2212FF FORD Truck and SUV Applications Ford Ranger Standard & Extended Cab 3" 3" ND 900SP I 2210HE " 2" ND 901SP H 2210HE Ford Ranger 2" 4" ND 902SP H 2210HE Standard Cab 3" 4" ND 903SP H 2210HE F-150 TRUCK 3" 4" H 2210HE " 5.5" H 2210HE " 2" ND 901SP H 2210HE " 4" ND 904SP H 2210HE " 4" ND 905SP H 2210HE " 4" H 2210HE " 5.5" H 2210HE " 1" EE NA 8537 Ford F-150 2WD All Cabs 0" 2" EE NA " to -3" 5" 964SP EE NA Dodge Ram 1500 Standard & Quad Cab Dodge Ram 1500 Standard Cab Dodge Ram 1500 Quad Cab Dodge Ram 1500 Extended Cab Auto Trans Only ALL EXCEPT Long Beds Coils rated for V8s only Dodge Ram 1500 Extended Cab Auto Trans Only ALL EXCEPT Long Beds Coils rated for V8s only Ford Ranger Extended Cab Ford F-150 2WD All Cabs DESIRED LOWERING 0" 1" EE NA " 2" EE NA " to -3" 5" SP EE NA " 1" EE NA " 2" SP EE NA " to -3" 5" 911SP EE NA " 1" 912SP EE NA " 2" 913SP EE NA " to -3" 5" 914SP EE NA 8523 * Kits with SP front struts can add a 1" lift to 3" lowering range - adjustable in1/2" increments

41 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE DODGE Truck and SUV Applications SHACKLE HANGER KITS SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES FORD Truck and SUV Applications Use #4954 for front end alignments For use with automatic transmissions only. For use with automatic transmissions only. Dropped I-Beam construction. Dropped I-Beam construction. COMPONENTS TRUCKS + SUVS MUSCLE CARS * 6425 * 6406 * 6440 * 6425 * * 6406 Minimum Wheel size 20" * * 6440 Rear Shocks Only * 6440 Minimum Wheel size 20" * 6406 * 5982 * 6440 #25001 front strut offers a 1" lift to 3" lowering range in 1/2" increments. 39

42 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL F-150 TRUCK - continued COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 WITH SP SHOCK SHOCK 0" 2" I 10311B " 3" I 10311B " 4" ND 915SP I 10311B " or 3" 4" ND 917SP I 10311B " or 5" 6" ND 918SP I 10309B " 2" I 10311B " 4" I 10311B " 4" ND 915SP I 10311B " or 5" 6" ND 919SP I 10309B " or 3" 4" ND 917SP I 10311B " or 1" 2" ND 920SP I 10311B " 3" ND 921SP I 10311B " 2" ND 922SP I 10311B " 3" ND 921SP I 10311B " or 2" 3" ND 923SP I 10311B Ford Lightning 3" 4" ND 961SP B 2211HB F-250 & F-350 TRUCK DESIRED LOWERING FORD Truck and SUV Applications - continued Ford F150, F250 Light Duty. Std. Cab, Ext Cab Coils rated for V8 engine only Ford F150 Super Crew Coils rated for V8 engine only Ford Lightning Ford Harley Series Ford F-150 Std. Cab Ford F-150 Ext. Cab F-250/350 Std./Crew Cab Dually - All Except: Diesel engine 0" 1" B 2211HB " 4" ND 924SP B 2211HB " 4" ND 961SP B 2211HB " 6" ND 959SP B 2211HB " 1" B 2211HB " 4" ND 926SP B 2211HB " 4" ND 962SP B 2211HB " 6" ND 960SP B 2211HB " 2" B 2211HB " 4" ND 942SP B 2211HB F-250/350 Ext. Cab Dually Only - All Except: Diesel engine 0" 2" B 2211HB " 4" ND 943SP B 2211HB SUVS Ford Explorer 2" 2.5" 928 NA NA NA NA Ford Expedition, Navigator (2WD) Ford Expedition, Navigator (2WD) w/ factory equip. rear coil spring Ford Expedition, Navigator (2WD) w/ factory equip. rear air spring 2" or 3" 2" 929 NA NA NA NA 2" or 3" 2" ND 930SP I 2208BB " 2" ND 931SP I 2208BB " 3" ND 932SP I 2208BB " or 3" 3" ND 934SP I 2208BB " 2" or 3" ND 940SP I 2208BB " or 3" 2" or 3" ND 941SP I 2208BB

43 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE FORD Truck and SUV Applications 6400 SHACKLE HANGER KITS SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES Use #4952 for front end alignments Minimum wheel zize 18" Use #4952 for front end alignments Minimum wheel zize 18" Minimum wheel zize 18" Street performance shocks reco'ed. Trucks w/ lowered OEM Sport Suspension may not achieve specified drop. Use #4952 for front end aligns. Street performance shocks reco'ed. Trucks w/ lowered OEM Sport Suspension may not achieve specified drop. Minimum wheel size 18" Street performance shocks reco'ed. Trucks w/ lowered OEM Sport Suspension may not achieve specified drop. Minimum wheel size 18" Street performance shocks reco'ed. Trucks w/ lowered OEM Sport Suspension may not achieve specified drop. Use #4952 for front end aligns. Dropped I-Beam Construction. Lightnings must go to smaller tire size when using I-Beams. Must use C-Section Rail Kit w/ Hanger Kit.Trucks w/ lowered OEM Sport Suspension may not achieve specified drop. Dropped I-Beam Construction. Dropped I-Beam Construction. COMPONENTS TRUCKS + SUVS MUSCLE CARS Minimum wheel size 18". Kit contains components to lower rear factory Air-Ride. Min. wheel size 18". Kit contains components to lower rear factory Air-Ride 41

44 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS DESIRED LOWERING YEAR MODEL FORD Truck and SUV 4WD Applications Ford F 150 All Cabs NOTES: Ford F-150 4WD All Cabs Ford F-150 4WD All Cabs COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT WITH ND2 WITH SP SHOCK SHOCK 0" 1" EE NA " 2" EE NA " to -2" 5" 914SP EE NA " 1" or 3" EE NA " 2" or 4" EE NA " or 3" 2" or 4" SP EE NA " or 3" 3" or 5" EE NA " to -2" 0" or 2" EE NA " to -2" 2" or 4" 935SP EE NA " to -3" 3" or 5" 913SP EE NA " or 3" 2" ND 936SP D 10311B " or 3" 3" ND 937SP D 10311B " or 3" 4" ND 938SP D 10311B * Kits with SP front struts can add either a 2" lift to 2" lowering range (25002) or 1" lift to 3" lowering range - adjustable in1/2" increments 42

45 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS NOTES: SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE FORD Truck and SUV 4WD Applicat * 6425 * 6406 SHACKLE HANGER KITS * 6440 * 6425 * * 6409 SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES * 5982 * Remove stock block for add. lowering. Ubolt kit #6206 req'd. when factory block is removed for added lowering. * 6409 Remove stock block for add. lowering. * #25002 front strut offers a 2" lift to 2" lowering range in 1/2" increments Remove stock block for add. lowering. Remove stock block for add. lowering. Ubolt kit #6206 req'd. when factory block is removed for added lowering. Remove stock block for add. lowering. Ubolt kit #6206 req'd. when factory block is removed for added lowering. Do not lower vehicle front more than 3" COMPONENTS TRUCKS + SUVS MUSCLE CARS 43

46 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL COMPLETE KIT # STREET PEFORMANCE NITRO DROP 2 STAGE 1 STAGE 2 STAGE 3 WITHOUT IMPORT Truck and SUV 4WD Applications ISUZU Isuzu Hombre (6 Cyl.) Isuzu Hombre (4 Cyl.) MAZDA MITSUBISHI Mazda B-2300/ 3000/4000 All Cabs WITH ND2 WITH SP SHOCK SHOCK 2" 2" ND 612SP i 2412IF " or 3" 2" ND 777SP i 2412IF " or 3" 3" ND 650SP i 2412IF " 3" ND 614SP i 2412IF " 3" ND 632SP i 2412IF " or 5" 5" ND 620SP i 2410IF " 2" ND 612SP i 2412IF " 2" ND 779SP i 2412IF " or 3" 3" ND 630SP i 2412IF " 3" ND 614SP i 2412IF " 3" ND 780SP i 2412IF " or 5" 5" ND 616SP i 2410IF " 3" ND 900SP I 2210HE " 4" ND 903SP H 2210HE " 4" H 2210HE " 5.5" ND 957SP H 2210HE " 4" ND 905SP H 2210HE " 4" H 2210HE " 5.5" ND 958SP H 2210HE Mitsubishi Pickup Series 2.5" 3" ND 436SP I 2209HH NISSAN Mazda B- 2300/3000/4000 Std. Cab Mazda B- 2300/3000/4000 Ext. Cab Nissan Titan Nissan Frontier (all except crew cab) DESIRED LOWERING 2" 4" SP FL NA " to -2" 4" 438SP FL NA 8534 * Kits with SP front struts offer 2" lift to 2" lowering range - adjustable in1/2" increments 2" 3" ND 439SP C 2209HH Nissan Pickup & Hardbody 2" 3" ND 440SP C 2209HH " 3" C 2209HH Nissan Armada +2" to -2" 966SP NA * Kits with SP front struts offer 2" lift to 2" lowering range - adjustable in1/2" increments TOYOTA Toyota Tundra All cabs- V8 only (all except TRD) 2" 4" SP NE NA NA +2" to -2" 4" 442SP NE NA NA * K Toyota Tacoma (6 Cyl.) 2" 3" ND 443SP I 2210HH Toyota Pickup 2" 3" ND 444SP I 2209HH " 3" I 2209HH

47 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPINDLES BALL JOINT I - BEAMS SPRINGS or KEYS LIFT / LOWERING STRUTS C o l u SHACKLE SHACKLE HANGER KITS IMPORT Truck and SUV 4WD Applications SPRINGS FLIP KIT BLOCK KIT LEAF SPRING NOTES For Extend. Cab Apps. use Lowering Block #6202 (3" drop w /2" Taper) or #6102 (2" Block w/ 2" taper). All except AWD models. For Extend. Cab Apps. use Lowering Block #6202 (3" drop w /2" Taper) or #6102 (2" Block w/ 2" taper). When lowering rear of S10 / S15 check that yoke is properly placed so that the trans. Seal is in its original position. All except AWD models. For Extend. Cab Apps. use Lowering Block #6202 (3" drop w /2" Taper) or #6102 (2" Block w/ 2" taper). When lowering rear of S10 / S15 check that yoke is properly placed so that the trans. Seal is in its original position. Use #4954 for front end alignments. This part is a leaf spring Dropped I-Beam construction Dropped I-Beam construction. This part is a leaf spring Dropped I-Beam construction Dropped I-Beam construction Dropped I-Beam construction. This part is a leaf spring Dropped I-Beam construction * 6450 * 6450 #25009 front strut offers 2" lift to 2" lowering range in 1/2" increments * #25009 front strut offers 2" lift to 2" lowering range in 1/2" increments All except AWD models. For Extend. Cab Apps. use Lowering Block #6202 (3" drop w /2" Taper) or #6102 (2" Block w/ 2" taper). All except AWD models. For Extend. Cab Apps. use Lowering Block #6202 (3" drop w /2" Taper) or #6102 (2" Block w/ 2" taper). For Extend. Cab Apps. use Lowering Block #6202 (3" drop w /2" Taper) or #6102 (2" Block w/ 2" taper). Spindle will not work w/ 14" wheels. This part is a leaf spring. Spindle will not work w/ 14" wheels. For Extend. Cab Apps. use Lowering Block #6202 (3" drop w /2" Taper) or #6102 (2" Block w/ 2" taper). Shock does not fit Spindle will not work w/ 14" wheels. Shock does not fit COMPONENTS TRUCKS + SUVS MUSCLE CARS 4263 * 6540 * 6540 #25011 front strut offers 2" lift to 2" lowering range in 1/2" increments For Extend. Cab Apps. use Lowering Block #6202 (3" drop w /2" Taper) or #6102 (2" Block w/ 2" taper). 45

48 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS Superior Street + Performance Belltech Shocks: The perfect complement to any truck, stock, lowered or outfitted with aftermarket wheels. Nitro Drop 2 The completely new designed Nitro Drop 2 brings a high performance blend of internal valve technology and state of the art construction to your vehicle. The twin tube shock absorber features a cavitation free technology to keep your truck performing at it s best during spirited driving. With oversized internal and external construction, this robust shock absorber is the perfect suspension upgrade. Belltech s value oriented performance shock absorber Cavitation free valve train avoids air from decreasing the shock absorbers effectiveness Fully covered and durable metal dust boot provides a cleaner operating environment OEM quality rubber mounts featuring a vulcanized sleeve for maximum durability and stiffness Street Performance Belltech s Street Performance shock absorber has been engineered to provide a premium quality ride for today s larger trucks and luxury SUVs. Belltech engineers have developed a great balance between comfort and performance by focusing their attention on tuning the low speed compression and rebound characteristics of this shock absorber. Belltech s premium performing shock absorber Excellent OEM quality replacement upgrade Oversized construction provides additional damping control Complements larger OE and aftermarket wheel/tire packages for increased tire contact area The progressive rebound tuning will complement large aftermarket wheels, keeping the ride smooth and firm. Belltech Street Performance shock absorbers are the ideal balance between performance and comfort. Belltech Recommendation Belltech recommends when installing lowering springs to also install shorter stroke shocks, such as the Nitro Drop 2 or the Street Performance shock absorbers. When your suspension is lowered, the amount of travel within your shocks decreases and installing shorter stroke shocks is one way to optimize performance and safety. 46

49 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: BELLTECH LOWERING YEAR MODEL CHEVROLET Colorado Applications Colorado / Canyon All Cabs w/ ZQ8 Suspension CHEVROLET S-Series 2 WD Applications DESIRED LOWERING ND 2 SP DESIRED LOWERING ND 2 SP NOTES PART No. PART No. NOTES PART No. PART No. 0"-2" ball joint " blocks IF 2"-4" springs " leafs IF S10 / S15 Std. & Ext. Cab Pickup Only (4 & 6 Cyl.) 0"-2" spindles I 0-3" blocks IF S-10 Blazer / Jimmy / Extreme 2"-5" springs I 3-5" leafs IF CHEVROLET S-Series 4 WD Applications S-10 / S-15 Pickup / Blazer 1"-3" keys DD 1-3" blocks IF Incl. Typhoon & Syclone 1-3" leafs IF CHEVROLET 1/2 Ton Fullsize Truck 2 WD Applications " to -2" OEM springs " FF 1"-4" spindles " FF " FF 0"-2" spindles " FF 2"-5" keys " FF 5-6" FF 0"-2" spindles I 0-1" FF 2"-5" springs I 2-4" FF 5-7" FF Silverado 1500 SS / Denali Sierra (AWD) 0"-2" spindles " FF Incl. 01' GMC Sierra C3 2"-4" keys " FF CHEVROLET 3/4 Ton Fullsize Truck 2 WD Applications HD / 2500HD All cabs 0"-2" 1"-2" "-2" spindles I 0-1" FF 2"-5" springs I 2-4" FF 5-7" FF 0"-2" spindles I 0-1" IF 2"-4" springs I 2-4" IF 5-7" IF 0"-2" spindles I 0-1" IF 2"-5" springs I 2-4" IF 5-7" IF 0"-3" spindle HA 0-2" HF 4"-5" springs HA 3-6" HF 0"-3" spindle HA 0-1" 2210AA 1"-3" springs HA 2-5" AA spilndles keys CHEVROLET 1 Ton Fullsize Truck 2 WD Applications /2-Ton Silverdo/Sierra (All Cabs) (struts offer 2" lift to 2" lowering function in 1/2" increments) 1/2-TON Silverado Std & Ext. Cab Short Bed Onl (with factory equip. front torsion bar)y 1/2-TON Silverado CREW CAB (4DR) 1/2-TON Silverado Std. & Ext. Cab Short Bed Only (with factory equip. front coil spring) 1/2-TON C-1500 Std & Ext. Cab 1/2-TON C-1500 SS-454 ONLY. 1/2-TON C-10 Pickup, 1/2-TON Blazer / Jimmy 1/2-TON C-10 Pickup 3/4 & 1-TON Single Rear Wheel-8 Lug Only & Crew Cab 3/4 C-2500 Ext. & Crew Cab Single Rear Wheel-8 Lug Only 3/4-TON C-2500 ALL EXCEPT: 8-LUG 3500HD All cabs 1-TON WHEEL 8 LUG 1-TON C-3500 Std./Ext Cab & Dually TON C-3500 Crew Cab & Dually (8' Bed) H 10103H 0"-4" 5"-7" FF 2210FF 0"-3" spindles I 0-1" IF 2"-5" springs I 2-4" IF 5-8" IF 0"-3" spindles I 0-1" IF 2"-5" springs I 2-4" IF 5-8" IF 0"-3" spindles I 0-1" IF 2"-5" springs I 2-4" IF 5-7" IF 0"-2" spindles H 0"-4" FF 1"-2" keys H 5"-7" FF 0"-3" spindles I 0-1" IF 2"-5" springs I 2-4" IF 5-8" IF 0"-3" spindles I 0-1" IF 2"-5" springs I 2-4" IF 5-8" IF 0"-3" spindles I 0-1" IF 2"-5" springs I 2-4" IF Note "spindles" = these shocks are designed for OEM replacement, 1" spring or spindle only lowerings Note "springs" = for any 2-3" spring or 2-5" spring/spindle lowering we recommend shorter shocks 5-8" IF COMPONENTS TRUCKS + SUVS MUSCLE CARS 47

50 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS BELLTECH LOWERING - continued YEAR DESIRED LOWERING ND 2 SP DESIRED LOWERING ND 2 SP NOTES PART No. PART No. NOTES PART No. PART No. 0"-3" spindles I 0-1" IF 2"-5" springs I 2-4" IF 5-8" IF 0"-3" spindles I 0-1" IF 2"-5" springs I 2-4" IF 0"-3" spindles I 0-1" IF 2"-5" springs I 2-4" IF 5-8" IF 0" HA 0-2" IF 2"-4" springs HA 2-4" IF +2" to -2" OEM springs " FF 1"-4" spindles " FF 5-7" FF 1/2-TON Silverado/Sierra Std. & Ext. Cab 0"-2" spindles " FF Short Bed Only (with factory equip. front coil spring) 2"-4" keys " FF 1"-3" keys GD 0-1" IF 2-4" IF Tahoe / Yukon / Yukon XL / Suburban / Avalanche +2" to -2" OEM springs " to 0" 2414FF 1"-4" spindles " FF 3-4" FF Suburban/Yukon XL +2" to -2" OEM springs " to 0" 2414FF 1"-4" spindles " FF 3-4" FF Chevy Avalanche +2" to -2" OEM springs " to 0" 2414FF 1"-4" spindles " FF 4-5" FF Tahoe / Yukon / Suburban / Yukon XL 0"-2" spindles " FF Without Factory Premium Ride Shocks 2"-4" keys " FF Chevy Avalanche 0"-2" spindles " FF Without Factory Premium Ride Shocks (Including Z71) 2"-4" keys " FF +1" to -2" OEM springs " DD 2-3" DD 03-06' SSR +1" to -2" OEM springs ,5" DD TON C-3500 Ext. Cab & Dually 1-TON C-3500 Ext. Cab & Dually 1-TON C-30 Crew Cab & Dually Only 1/2-TON Silverado/Sierra (struts offer 2" lift to 2" lowering function in 1/2" increments) 1/2 Ton C-1500 Std. & Ext. Cab Without Factory Autoride Shocks (struts offer 2" lift to 2" lowering function in 1/2" increments) With Factory Autoride Shocks (shocks offer 2" lift to 2" lowering function in 1/2" increments) Suburban 1/2-TON (2-WD) Suburban 3/4-TON 2 WD (6-LUG) Tahoe / Yukon 4 Door Only MODEL CHEVROLET 1 Ton Fullsize Truck 2 WD Applications - continued CHEVROLET Fullsize Truck 4 WD Applications TON C-3500 Crew Cab CHEVROLET SUV 2 WD Applications Without Factory Autoride Shocks (shocks offer 2" lift to 2" lowering function in 1/2" increments) Trailblazer/Envoy (struts offer 1" lift to 2" lowering function in 1/2" increments) 0"-2" spindles I +1 to -1" IF 2"-5" springs I 2-4" IF 5-7" IF 0"-2" spindles I +1 to -1" IF 2"-5" springs I 2-4" IF 5-7" IF 0"-2" spindles I +1 to -1" IF 2"-5" springs I 2-3" IF 4-5" IF Tahoe / Yukon 2 Door Only Suburban 1/2-TON 1-1/4" Rotor CHEVROLET SUV 4 WD Applications 0"-2" spindles I +1 to -1" IF 2"-5" springs I 2-4" IF 5-6" IF 0"-3" spindles HA 0-1" HF 2"-4" springs HA 5-6" HF Tahoe / Yukon / Yukon XL / Suburban / Avalanche +1" to -2" OEM springs " to 0" 2414FF Without Factory Autoride Shocks (struts offer 2" 1"-4" spindles " FF lift to 2" lowering function in 1/2" increments) 3-4" FF Tahoe/Suburban/Yukon XL, & Avalanche +1" to -2" OEM springs " to 0" 2414FF with Autoride (struts offer 2" lift to 2" lowering 1"-4" spindles " 2412FF function in 1/2" increments) 3-4" 2410FF Note "spindles" = these shocks are designed for OEM replacement, 1" spring or spindle only lowerings Note "springs" = for any 2-3" spring or 2-5" spring/spindle lowering we recommend shorter shocks 48

51 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: BELLTECH LOWERING - continued YEAR MODEL CHEVROLET SUV 4 WD Applications - continued DESIRED LOWERING ND 2 SP DESIRED LOWERING ND 2 SP NOTES PART No. PART No. NOTES PART No. PART No. Chevy Avalanche +1" to -2" OEM springs " to 0" 2414FF 1"-4" spindles " FF 4-5" FF 0"-2" spindles " FF 2"-4" keys " FF Tahoe / Yukon / Suburban / Yukon XL 0"-2" spindles " FF Without Factory Premium Ride Shocks 2"-4" keys " FF 0"-3" keys GD +1 to -1" IF GD 2-4" IF Suburban 0"-3" keys GD +1 to -1" IF K-1500 only GD 2-4" IF CHEVROLET Van Applications 0"-3" keys GD +1 to -1" IF GD 2-4" IF 0"-3" keys GD +1 to -1" IF GD 2-4" IF Astro & Safari Van 2-WD 2"-4" I 2-4" DD DODGE Truck & SUV 2 WD Applications FORD Truck & SUV 2 WD Applications 0" I 0-1" 2214DD 1"-3" springs I 2" DD 0" I 0-1" 2214DD 1"-3" springs I 2-4" DD 1" springs I 0-1" 2214DD 2" DD 0"-2" spindles I 0-1" 2212ID 2"-4" springs I 2-4" ID 0" " FF 1"-3" springs " FF 0" I 0-2" FF 1"-3" springs I 3-5" FF 0"-3" spindles F 0-1" FF 3"-5" springs F 2-4" FF 5-7" FF 0" F 0-1" FF 1"-3" springs F 2-4" FF Ford Ranger Std. Cab and Ext. Cab 3" 3" I 2-4" HE Ford Ranger Std. & Ext. Cab 2"-5" I-beam H 4"-5.5" HE Without Factory Autoride Shocks (struts offer 2" lift to 2" lowering function in 1/2" increments) Chevy Avalanche Without Factory Premium Ride Shocks (Including Z71) Tahoe, Yukon, Escalade & Denali (4 door only) Tahoe, Yukon (2 door only) Blazer Full Size (4 door only) Durango Dakota (All Cabs) Dakota R/T Dakota Ram 1500 Std. & Quad CAB Ram 1500 Std. & Quad CAB Ram 1500 Std. & EXT CAB. Ram 2500 & 3500 V-10 & Diesel Ford F150 2WD All Cabs +1 to -3" OEM Springs " EE (struts offer 1" lift to 3" lowering function in 1/2" increments) Ford F150, F250 Light Duty (All Cabs) 1"-4" Spindles " EE 4-5" EE 0"-2" spindles I 0-1" B 3"-5" springs I 2-4" B 6" B COMPONENTS TRUCKS + SUVS MUSCLE CARS Ford Lightning & Harley Series 0"-2" spindles I 0-1" B 3"-5" springs I 2-3" B Ford F150 Std. & Ext. Cab. 3" I-beam B 1-4" HB 2"-5" springs B 7" HB F-250/350 Std./Ext./Crew Cab (Dually only) 1"-3" springs B 2-4" HB Ford Expedition, Navigator (2WD) 0"-2" spindles I 0" HB 2"-3" springs I 1-3" HB Note "spindles" = these shocks are designed for OEM replacement, 1" spring or spindle only lowerings Note "springs" = for any 2-3" spring or 2-5" spring/spindle lowering we recommend shorter shocks 49

52 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS BELLTECH LOWERING - continued YEAR FORD TRUCKS 4 WD Applications DESIRED LOWERING ND 2 SP DESIRED LOWERING ND 2 SP NOTES PART No. PART No. NOTES PART No. PART No. +2 to -2" OEM Springs " OEM Blocks 2216EE 0"-4" Spindles " EE -2"-4" OEM Springs " EE 0"-3" keys D 0-1" 10314B 2-4" B 0"-2" spindles K 0-3" blocks IF 2"-5" springs K 3-5" leafs IF Mazda B-2300/3000/4000 Std. & Ext Cab. 3" springs I 3" HE Mazda B-2300/3000/4000 Std. & Ext. Cab 2"-5" spindles H 4-5.5" HE Mitsubishi Pickup Series 2.5" springs I 3" HH " to -2" OEM Springs " 2313FL 2-4" 2310FL Nissan Frontier ALL EXCEPT: Crew Cab 2" spindles C 3" HH Ford F150 4WD All Cabs - (lifting shock offers 2" lift up to 2" lowering in 1/2" steps). (lowering strut offers 2" to 4" lowering in 1/2" increments) Ford F 150 (All Cabs) IMPORT TRUCKS / SUVS 2 WD Applications Isuzu Hombre (4 & 6 Cyl.) Nissan Titan Toyota Tundra MODEL +2" to -2" OEM Springs " 10314NE 2-4" 10311NE Toyota Pickup 2" spindles I 3" HH Note "spindles" = these shocks are designed for OEM replacement, 1" spring or spindle only lowerings Note "springs" = for any 2-3" spring or 2-5" spring/spindle lowering we recommend shorter shocks LIFT / LOWERING STRUTS YEAR MODEL RIDE HEIGHT SHOCK FOOTNOTES CHEVROLET Colorado / Canyon 4 & 5 Cylinder. (All Cabs) Lower/Lift -1" to 0" Silverado / Sierra Lower/Lift -2" to +2" Tahoe, Yukon, Yukon XL, Suburban, Avalanche Lower/Lift -2" to +2" Trailblazer/Envoy Lower/Lift -2" to +1" FORD F-150 2WD (Std., Ext. & Quad Cab) Lower/Lift -3" to +1" NISSAN F-150 4WD (Std., Ext. & Quad Cab) Lower/Lift -3" to +1" Lower/Lift -2" to +2" Lowering strut only fits Colorado / Canyon For use with F150, must use supplied hardware kit. Call for details Titan Lower/Lift -2" to -2" Armada Lower/Lift -2" to -2" TOYOTA Tundra (All except TRD) Lower/Lift -2" to -2" NOTES: 50

53 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: O.E.M. YEAR MODEL CHEVROLET / GMC Colorado / Canyon Applications NITRO DROP 2 STREET PERFORMANCE Colorado / Canyon NA IF CHEVROLET / GMC S-Series 2WD Applications S10-Extreme i 2412IF S10 / S15 Pick Up i 2412IF S10 Blazer / Jimmy i 2412IF CHEVROLET / GMC S-Series 4WD Applications S-10 / S-15 Pickup/Blazer 4wd DD 2412IF Typhoon DD 2412IF 1991 Syclone DD 2412IF CHEVROLET / 1/2 Ton Full Size Truck Applications /2-TON Silverado/Sierra NA FF Silverado SS 1500 (2WD & AWD) FF 2001 GMC Sierra C FF /2-TON Silverado/Sierra I 2212FF /2-TON C-1500 Silverado/Sierra I 2214IF /2-TON C-10/R10 Pickup HA 2212HF /2-TON C-Pickup HA 2208AA /2-TON C-Pickup HA 2208AA CHEVROLET / 3/4 Ton Full Size Truck Applications HD 2WD/4WD H 2211FF HD 2WD/4WD H 2211FF /4 Ton C I 2214IF CHEVROLET / 1 Ton Truck Applications HD Dually H 2211FF TON C I 2214IF TON C-30 CHEVROLET / GMC Full Size Truck 4WD Applications /2-TON Silverado/Sierra NA FF /2-TON Silverado/Sierra FF /2-TON C-1500 Silverado/Sierra GD 2214IF CHEVROLET / GMC SUV 2WD Applications Trail Blazer/ GMC Envoy 2WD-4WD NA DD SS Trail Blazer NA DD SSR NA DD Tahoe/Yukon/Suburban/Yukon XL NA FF Avalanche NA FF Tahoe / Yukon / Suburban & Yukon XL FF Avalanche Z FF Suburban I 2412IF Tahoe / Yukon 4 Door Only I 2412IF Tahoe / Yukon 2 Door Only I 2412IF /2-TON Blazer / Jimmy, HA 2212HF Suburban 1/2-TON HA 2212HF COMPONENTS TRUCKS + SUVS MUSCLE CARS CADILLAC / CHEVROLET / GMC SUV 4 WD Applications Escalade/Denali NA FF Tahoe/Yukon/Suburban/Yukon XL NA FF Avalanche NA FF Escalade / Denali FF Tahoe / Yukon / Suburban / Yukon XL FF Avalanche FF Tahoe, Yukon, Escalade & Denali GD 2212IF Tahoe, Yukon (2 door only) GD 2412IF Suburban GD 2212IF CHEVROLET / GMC Van Applications Astro & Safari Van 2WD I 2210DD 51

54 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS O.E.M. - continued YEAR MODEL DODGE / Truck + SUV Applications NITRO DROP 2 STREET PERFORMANCE Durango I 2212DD Durango 4WD 10103B 2212DD Dakota I 2212DD Dakota 4WD 10103B 2212DD Dakota R/T I 2212DD Dakota I 2210ID Dakota 4WD 10103B 2215ID Dakota I 2210ID DODGE / Ram WD Truck Applications Ram Ram I 2215FF Ram F 2212FF DODGE / Ram WD Truck Applications Ram FF Ram FF Ram F 2216FF Ram F 2214FF DODGE / Ram Truck Applications Ram F 2212FF Ram F 2212FF FORD / Truck + SUV 2WD Applications Ranger (All w/ coil spring front - Except Edge) I 2210HE Ranger H 2210HE F-150 NA EE F-150 NA EE F-150, F250 Light Duty I 10311B Lightning I 10311B Harley Series I 10311B Lightning B 2211HB F B 2211HB F-250/ B 2211HB Expedition, Navigator (2WD) I 2208BB FORD / Truck + SUV 4WD Applications F-150 4WD NA EE F-150 4WD NA EE F-150 4WD D 10311B Ranger 4WD 10109I 2216HE Ranger 4WD 10103H 2213HE IMPORT / Truck + SUV Applications ISUZU Hombre i 2412IF MAZDA B-2300/3000/ I 2210HE B-2300/3000/ H 2210HE MITSUBISHI Pickup I 2209HH NISSAN Titan 2/4WD NA FL Frontier C 2209HH Pickup & Hardbody C 2209HH Armada 2/4WD NA TOYOTA Tundra (All except TRD) NA NA NE Tacoma I 2210HH Pickup I 2209HH 52

55 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: THE EXCLUSIVE BELLTECH BUILD A SHOCK A step-by-step guidethat allows you to build a part number for those customers needinga semi-custom shock absorber set-up. With the Guide you will be able to determine shock body style and end fitments, shock valving, extended and collapsed lengths, and bushing size. 1 3 Step 1: Determine your Mounting / Shock Body Style DETERMINE MOUNTING / SHOCK BODY STYLE PART No. CODE UPPER MOUNT LOWER MOUNT 10 Pin Loop 2 Loop Loop 3 Pin Fork Step 3: Determine the Length(s) DETERMINE 2 PART No. CODE LENGTH / INCHES LENGTH / MILLIMETERS PART No. CODE EXTENDED COLLAPSED EXTENDED COLLAPSED Step 2: Determine your Shock Valving Advanced Valving Hi-performance 4 Standard Valving Front Standard Valving Rear Heavy Duty Rear Valving 6 Heavy Duty Front Valving 4 DETERMINE SHOCK VALVING DESCRIPTION Normal operation Normal operation Trucks/SUV's Trucks/SUV's Step 4: Determine the Bushing Size PART No. CODE INSIDE (mm) WIDTH (mm) A B C D E F G H ,5 L I K N DETERMINE BUSHING SIZE bar pin closed bar pin open bar pin adapter Need Some Help? Call Our Tech Hotline COMPONENTS TRUCKS + SUVS MUSCLE CARS 5 Step 5 - EXAMPLE: Here s how you would use the charts above to create a part number for a custom rear shock for a 2007 Tahoe. BODY STYLE VALVING LENGTH BUSHING TOP BUSHING BOTTOM FINISHED PART No I 10101I F F 2412FF Step 1: Step 2: Step 3: Step 4: Step 5: Shock Body Style (code 2) Valving (Standard / Advanced / Heavy Duty) (code 4) Shock Length ext/22.5 ; coll/14 (code 12) Top Bushing size inside 15mm / outside 42mm (code F) Bottom Bushing size inside 15mm/ outside 42mm (code F) 53

56 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS SPINDLES YEAR MODEL DRIVE DROP PART No. NOTES CHEVROLET S-Series & 6 Cyinder Standard & Extended Cabs 2" Blazer/Jimmy 2" Blazer/Jimmy 2" 2100 CHEVROLET / GMC - Full Size Trucks Silverado / Sierra 2WD & 4WD 2" /2 Ton Chev - All Cabs 2WD & 4WD 2" /2 Ton Chev - Extended Cab 2" /2 Ton Chev - Standard Cab 2" /2 Ton Chev - Standard Cab 2" /2 Ton Chev (Heavy duty brake - w/ 1.25" thick rotor) 3" /2 Ton Chev (Light duty brake - w/ 1" thick rotor) 3" /2 Ton Chev C-10 3" /2 Ton Chev C-10 (requires convert. to disc brakes or equiv.) 3" HD 1500, 2500, 3500 (8-lug) 2WD & 4WD 2" 2550 Minimum wheel size 17" /4 Ton Chev - All Cabs 3" /4 Ton Chev (Six Lug - All Ccabs) 2" Ton Chev - All Cabs 3" Ton Chev - All Cabs 3" Ton Chev - All Cabs 3" 3500 CHEVROLET SUV Tahoe, Yukon, 2WD & 4WD 2" Suburban, Yukon XL 2WD & 4WD 2" Avalanche 2WD & 4WD 2" Escalade, Denali 2WD & 4WD 2" Tahoe, Yukon 2WD & 4WD 2" Suburban, Yukon XL 2WD & 4WD 2" Avalanche 2WD & 4WD 2" Escalade, Denali 2WD & 4WD 2" Suburban & 6 Lug 3/4 Ton 2" Tahoe, Yukon (2 & 4 door) 2" Suburban (Heavy duty brake - w/ 1.25" thick rotor) 3" Suburban (Light duty brake - w/ 1" thick rotor) 3" 3200 CHEVROLET ASTRO VAN Astro / Safari 2" 2700 All except All Wheel Drive" models DODGE TRUCKS Ram 1500 Std. & Ext. Cabs 2" 2650 Replacement Lower Ball Joint for 2650 Spindle Dakota 2" Dakota 2" 2600 FORD TRUCKS F-150 Std. Ext. & Crew Cab 2" 2351 Minimum Wheel size 20" F-150 Std. Ext. & Crew Cab 2" Expedition, Navigator 2" 2350 Minimum wheel size 17" On years 81-87, If brake rotor measures 1" thick use Spindle #3200 if 1.25" use #3100 Minimum wheel size 17" On years 81-87, If brake rotor measures 1" thick use Spindle #3200 if 1.25" use #3100 Minimum wheel size 18" IMPORT TRUCKS Isuzu Hombre 2" Nissan Frontier (All Except Crew Cab) 2" Nissan Pickup & Hardbody 2" Toyota Pickup 2" 2000 NOTES: 54

57 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: BALL JOINTS + I-BEAMS YEAR MODEL DRIVE DROP PART No. NOTES CHEVROLET COLORADO Ball Joint Applications END ALIGNMENT KITS (Caster / Camber) CHEVROLET / GMC Chevrolet/GMC C WD/4WD Front Camber Bushings 2 degree (4) Chevrolet/GMC C WD/4WD Front end alignment cam lock plate kit 1 degree (8) Chevrolet/GMC C WD/4WD Front 2 degree Camber Bushings (4), Cam Lock Plates 1 degree (8) & Bushing install Tool Chevrolet/GMC C-1500 / 2500 / 3500 Chevy / GMC Pickups (Front end alignment cam kit) 4950 DODGE Dodge Ram 1/2 Ton Pickup (Front end alignment cam kit) 4949 FORD Ford F-150, Expedition, Navigator (Front end alignment cam kit) Ford Ranger / Mazda, Explorer / Mountaineer (Front end alignment cam kit) 4954 HONDA Std,Ext, & Quad Cabs 4 & 5 Cyl.Incl. ZQ8 (all except Torsion bar front end) FORD TRUCK Front I-Beam Applications " 2103 Ranger Std. & Ext. Cab 3" 4005 I-Beam Hardware Kit 2" 4004 Ford-150 (Including Lightning) 3" 4010 I-Beam Hardware Kit 2" Ford 250 / 350 3" 4020 MAZDA Front I-Beam Applications Mazda B-Series Std. & Ext. Cabs 3" 4005 Dropped I-Beam Construction I-Beam Hardware Kit Honda Ridgeline-Rear Camber Kit (2) Dropped I-Beam Construction Dropped I-Beam Construction. Lightnings must change to smaller tire size when using I-Beams COMPONENTS TRUCKS + SUVS MUSCLE CARS 55

58 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS SPRINGS YEAR 1" or 2" 2" or 3" 1" 2" 3" cyl- 6 Cyl std. & ext cab Cyl std. & ext cab Cyl std. & ext cab Blazer/Jimmy Blazer Xtreme 4228 N/A N/A Extreme P/U 4227 N/A N/A Blazer/Jimmy 4cyl Blazer/Jimmy 6cyl Trailblazer/Envoy SSR+SS Trailblazer 4207 (1.5") Chevrolet Colorado / Canyon Standard. Cab 4 & 5 Cyinder Chevrolet Colorado / Canyon Extended & Quad Cab 4 & 5 Cyinder 1" or 2" 2" or 3" 1" 2" 3" " 2.5" Astro/Safari Silverado / Sierra Ext & Crew Cabs (New Body Style) Silverado / Sierra Std Cab. (New Body Style) 1/2 Ton Chev/GMC (Ext. & Crew cabs) incl. 07 Classic Body 1/2 Ton Chev/GMC (Std. cab) incl. 07 Classic Body 1/2 Ton Chev/GMC (Ext. cab & 454 SS) 1" or 2" 2" or 3" 1" 2" 3" /2 Ton Chev/GMC (Std. cab) /2 Ton Chev/GMC (Small block eng. only) N/A /4 Ton Chev/GMC (All cabs) N/A /4 Ton Chev/GMC (All cabs) N/A MODELS CHEVROLET S-Series Applications CHEVROLET Colorado Applications CHEVROLET Astro Van Applications CHEVROLET Full Size Truck Applications 3/4 Ton Chev/GMC (Six lug- all cabs) BELLTECH "PRO" SPRING & SPACER KIT DESIRED DROP BELLTECH SPRINGS DESIRED DROP Ton Chev/GMC (All cabs) N/A Ton Chev/GMC (All cabs) N/A Ton Chev/GMC (All cabs) N/A 4500 N/A NOTES All except All Wheel Drive" models must use Alignment Kit #4950 Not designed for diesel applications Not designed for diesel applications must use Alignment Kit #4950 Not designed for diesel applications Not designed for diesel applications must use Alignment Kit #4950 Not designed for diesel applications CHEVROLET SUV Applications Tahoe, Yukon, Suburban, Yukon XL, Avalanche Escalade, ESV, EXT, & Denali with factory Autoride 1" or 2" 2" or 3" 1" 2" 3" Suburban & 6 Lug 3/4 Ton Tahoe, Yukon (2 & 4 door) Not designed for diesel applications NOTES: 56

59 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPRINGS - continued YEAR MODELS DODGE Truck Applications 1" or 2" 2" or 3" 1" 2" 3" Ram Std. Cab Rama Crew Cab Ram 1500 Std. & Quad Cab Ram 1500 Std. Cab (include. HEMI) Ram 1500 Quad Cab (include. HEMI) Ram 1500 Std. Cab 8Cyl Ram 1500 Ext. Cab 8Cyl Ram 2500 V-10 & Diesel Ram 3500 V-10 & Diesel Durango Dakota Std. Ext. & Quad Cabs 8Cyl Dakota Std. Ext. & Quad Cabs 6Cyl Dakota RT Dakota Std. Cab 8Cyl Dakota Std. Cab 8Cyl FORD Truck + SUV Applications 1" or 2" 2" or 3" 1" 2" 3" F-150 Std. Ext. & Quad Cabs F-150 Std. Ext. & Crew Cab F-150 Harley Edition F-150 Lightning F-150 Std. & Ext. Cab Ranger Std. & Ext. Cab (except Edge) Ranger Std. & Ext. Cab F-250/350 Dually Only (No Diesel) Ford Explorer Ford Expedition, Navigator (2WD) Ford Expedition, Navigator (2WD) IMPORT Truck Applications BELLTECH "PRO" SPRING & SPACER KIT DESIRED DROP BELLTECH SPRINGS DESIRED DROP 1" or 2" 2" or 3" 1" 2" 3" Isuzu Hombre 6 Cyl Isuzu Hombre 4 Cyl Mazda B-Series Std & Ext. Cab Mazda B-Series Std & Ext. Cab 4794 NOTES NOTES Trucks w/ lowered O.E.M. Sport Suspensions may not achieve the specified drop. NOTES Use #4952 for front end aligns. Street Performance shocks reco'ed. Use #4952 for front end aligns. Street Performance shocks reco'ed. Trucks w/ lowered O.E.M. Sport Suspensions may not achieve the specified drop. Not designed for diesel applications. Use Part #4954 for front end alignments. NOTES Use Part #4954 for front end alignments. COMPONENTS TRUCKS + SUVS MUSCLE CARS Mitsubishi Pickup 4270 (2.5") Nissan Titan Toyota Tundra 8 Cyl. (All except TRD) Toyota Tacoma 6 Cyl NOTES: 57

60 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS OVER KITS TORSION BAR KEYS YEAR MODEL FOR 1" or 2" DESIRED DROP NOTES CHEVROLET S-Series 4WD Truck Applications S10, Blazer, Jimmy (all) 3922 Do not lower front of vehicle more than 3" CHEVROLET Fullsize 4WD Truck Applications /2 Ton Chev/GMC All Cabs incl. 07 Classic Body /2 Ton Chev / GMC Standard & Extended Cabs HD /2500HD /3500HD GM 3919 CHEVROLET SUV Applications Tahoe, Yukon Suburban, Yukon XL Avalanche Escalade, Denali Blazer Full Size (4 door only) Suburban Suburban & 6 Lug 3/4 Ton Tahoe, Yukon (2 & 4 door) 3920 FORD Truck Applications F-150 Std. Ext. & Crew Cab 3933 Do not lower front of vehicle more than 3" FORD SUV Applications Ford Expedition, Navigator 3933 Do not lower front of vehicle more than 3" IMPORT Truck Applications YEAR MODEL CHEVROLET / GMC Colorado / Canyon (All Cabs) DESIRED DROP BT OVER KITS GALVANIZED STRUTS FIXED DAMPENING RATE STRUTS ONLY Do not lower front of vehicle more than 3" Do not lower front of vehicle more than 3" Isuzu Hombre (All) 3922 Do not lower front of vehicle more than 3" BT OVER KITS - MADE BY KW INOX-LINE - STAINLESS STEEL FIXED DAMPENING RATE STRUTS STRUTS STRUTS & ONLY & ADJUST. REBOUND & COMPRESSION DAMPENING STRUTS & With FACTORY Leaf Springs 0"-3" x N/A N/A With LOWERING Leaf Springs 0"-3" x N/A N/A SSR 1"-2" 2" N/A N/A N/A N/A Trailblazer, Envoy 1"-2.5" 3" N/A N/A N/A N/A SS Trailblazer (front coilovers only) 0"-1.25" xx NA NA N/A N/A xxx SS Trailblazer (front coilovers w/rear V3 shocks) 0"-1.25" NA NA N/A N/A xxx FORD Ford F WD (Std., Ext., Crew & Super Crew Cab) 0"-3" x Ford F WD (Std., Ext., Crew & Super Crew Cab) 0"-4" x NOTE x = All rear lowering components can be combined xx = Adjust rear factory air ride for drop xxx = Front upper control arm required if lowered more than 1.25". Adjust rear factory air ride for drop. 58

61 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPRING DISTANCE SPACERS YEAR MODEL CHEVROLET / S-Series APPROX. RIDE HEIGHT CHANGE PART No. PART No. LEVELING RANGE PART No & 6 Cylinder Std. & Ext. Cab 1" /4" Blazer / Jimmy 1" /4" Extreme P/U 1" /4" Blazer/Jimmy 4 & 6 Cyl. 1" /4" 4930 CHEVROLET / Colorado Standard Cab 4 & 5 Cyl. 1" " (3 x 5/16") Extended & Quad Cab 4 & 5 Cyl. 1" " (3 x 5/16") CHEVROLET / Full Size Trucks /2 Ton Chevy/GMC (all cabs) 0.5" or 1" /2 Ton Chevy/GMC (all cabs) 1" /4" /2 Ton Chevy/GMC (all cabs & 454 SS) 1" /4 Ton Chevy/GMC (All cabs) 1" /4 Ton Chevy/GMC (All cabs) 1" /4 Ton Chevy/GMC (Six lug- all cabs) 1" Ton Chevy/GMC (All cabs) 1" Ton Chevy/GMC (All cabs) 1" Ton Chevy/GMC (All cabs) 1" CHEVROLET / SUV Tahoe, Yukon, Yukon XL, Suburb., Avalanche 0.5" or 1" Tahoe, Yukon 1" N/A Suburban, Yukon XL 1" N/A Avalanche 1" N/A Suburban & 6 Lug 3/4 Ton 1" N/A Tahoe, Yukon (2 & 4 door) 1" N/A FORD Trucks F-150 Std. Ext. & Quad Cabs 1" F-150 Std. Ext. & Crew Cab (all models) 1" Ranger Std. & Ext. Cab (ex. Edge Model) 1" DODGE Trucks Ram 1500 Std. & Quad Cab (include. HEMI) 1" Ram 1500 Std.& Ext. Cab 8 Cyl. 1" Durango 1" Dakota Std. Ext. & Quad Cabs 6 & 8 Cyl. 1" Dakota RT 1" IMPORT Trucks SPRING DISTANCE SPACERS Isuzu Hombre 6 Cyl. 1" Isuzu Hombre 4 Cyl. 1" Mazda B-Series Std & Ext. Cab 1" LEVELING SPACERS COMPONENTS TRUCKS + SUVS MUSCLE CARS ANTI SWAY-BAR ADAPTERS YEAR MODEL PART No. CHEVROLET Full Size Truck Applications /2 Ton Chev/GMC (Std. & Ext. cabs) & 3/4 Ton (w/ 6 lug) Chev/GMC 3/4 Ton (8lug), 1-Ton & SS /2 Ton Chev/GMC C-10, Blazer, Jimmy 5704 CHEVROLET SUV Applications WD Tahoe Yukon 4 Door Adapter Kit Suburban 1500 Adapter Kit Suburban 1/2 Ton Adapter Kit 5704 DODGE Truck Applications Dakota

62 2011 APPLICATION GUIDE ANTI SWAY BARS MUSCLE CARS TRUCKS + SUVS COMPONENTS 60 YEAR MODEL CHEVROLET / Colorado Applications KIT / DIAM. DIAM. NOTES Colorado/Canyon (all Cabs) / " CHEVROLET / S-Series Applications Trailblazer, Envoy, SSR N/A /8" Chevy / GMC S-Series (Pickup Only) /4" " Blazer/Jimmy 2 Dr /4" /8" Blazer/Jimmy 4 Dr /4" /8" Blazer/Jimmy /4" " Typhoon /8" /4" Syclone /8" " CHEVROLET / Full Size Truck Applications Silverado, Sierra 5407 N/A Silverado, Sierra (with factory front torsion bars) /4" " Silverado 1500 SS (AWD) /4" " /2 Ton Chev/GMC (All cabs, 2wd) /8" " HD,3500HD Chev/GMC (All cabs) /8" /8" GMC Sierra Denali (w/quadra-steer) /4" N/A /2 Ton Chev/GMC (Std. & Ext. cabs) & 3/4 Ton (w/ 6 lug) /8" " Chev/GMC 3/4 Ton (8lug), 1-Ton & SS /8" " /2 Ton Chev/GMC C-10, Blazer, Jimmy /8" " CHEVROLET / SUV Applications Tahoe, Yukon, Suburban, YukonXL, Avalanche /8" " Tahoe, Yukon, Suburban, YukonXL, Avalanche /4" " WD Tahoe, Yukon (4 Door) will not fit Denali /8" /8" WD Tahoe, Yukon (2 Door) will not fit Denali /8" " WD Tahoe, Yukon (4 Door) /8" /8" Suburban /8" /8" Suburban 1/2 Ton /8" /8" CHEVROLET / Van Applications Astro/Safari (2wd) /8" /8" DODGE / Truck Applications Ram 1500 (all cabs) /16" Ram 1500 Std. & Quad Cab (include. HEMI) /4" Ram 1500 Std. & Ext Cabs 8Cyl /8" " Dakota Std. Ext. & Quad Cabs /4" /4" Dakota /8" /16" D " /4" FORD / Truck Applications F-150 Std. Ext. & Quad Cabs (non flipped rear axle) F-150 Std. Ext. & Quad Cabs (flipped rear axle) F-150 Std. Ext. & Quad Cabs " F-150 Std. & Ext. Cab /8" " F-150 Crew Cab. Including Harley and Lightning /8" " Ranger Std. & Ext. Cab /4" /4" Ford Ranger /4" /4" 1989 Ford Ranger /4" /4" FORD / SUV Applications Ford Explorer /8" " Ford Expedition N/A " Expedition, Navigator 2WD /8" /4" IMPORT / Truck Applications Isuzu Hombre /4" " Toyota T /4" /8" Nissan Titan /8" " Nissan Pickup " /4" Mitsubishi Pickup " /4" Toyota Pickup " /4" Mazda Pickup /4" /4" Mazda Pickup /4" /4" Mazda Pickup " /4" For trucks w/o O.E. front sway bar order adapter kit #5700 For trucks w/o O.E. front sway bar order adapter kit #5704 Sway Bars only fit vehicles equipped with O.E. rear sway bar mounts For trucks w/o O.E. front sway bar order adapter kit #5700 Sway Bars only fit vehicles equipped with O.E. rear sway bar mounts For trucks w/o O.E. front sway bar order adapter kit #5704 For trucks w/o O.E. front sway bar order adapter kit #5708

63 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SHACKLE KITS YEAR MODEL 1" 2" 2"- 3" 3" 1/2" NOTES CHEVROLET TRUCKS Chevrolet / GMC 1/2 Ton Pickup Remove stock block for additional lowering Chevrolet / GMC 1/2 Ton Pickup Chevrolet 1/2, 3/4 & 1-Ton Pickup, Blazer & Jimmy Chevrolet Tahoe, Yukon & Suburban (4dr only) Chevrolet Tahoe, Yukon (2dr only) Chevrolet 1500, 2500 & 3500 Heavy Duty Pickup Remove stock block for additional lowering Chevrolet / GMC C2500 3/4 Ton Pickup Chevrolet / GMC C Ton Pickup DODGE TRUCKS Dodge Ram 1/2 Ton Pickup Dodge Ram 1/2 Ton Pickup Dodge Ram 2500 & 3500 Pickup 6590 FORD TRUCKS Ford F150 1/2 Ton Pickup Ford F150 1/2 Ton Pickup 4WD Ford F150 1/2 Ton Pickup Ford F150 1/2 Ton Pickup Ford F250, F350 Pickup 6425 HANGER KITS with HARDWARE DROP LIFT Remove stock block for additional lowering Ubolt kit #6206 is required when removing factory block for additional lowering YEAR MODEL DROP PART No. NOTES CHEVROLET / Truck Applications Chevrolet / GMC Short Bed Only (used in kit # 6512) 2" Chevrolet / GMC 1500 (6-hole hanger) 2" Chevrolet / GMC HD 2500 (8-hole hanger) 2" Chevrolet / GMC HD 3500 (10-hole hanger) 2"-3" 2" Chevrolet / GMC 1/2 Ton Stand. Cab (used in kit # 6500,6503,6505) 2" Chevrolet / GMC 1/2 Ton Extend. Cab (used in kit # 6503) 2" Chevrolet / GMC 3/4 & 1 Ton (used in kit # 6900 & 6905) 2" Chevrolet / GMC 1 Ton (used in kit # 6750) 2" Chevrolet / GMC 1/2 Ton (used in kit # 6800) 3" Chevrolet / GMC Suburban (used in kit # 6620) 2" 6625 DODGE / Truck Applications Dodge Dakota & RT (Front hanger only, used in kit # 6574) 2" Dodge Dakota 4" Dodge Dakota Std. Cab 4" Dodge Ram 1500 Ext. Cab (Front hanger only, used in kit # 6580 & 6584) 2" Dodge Ram 1500 Std. Cab (Front hanger only, used in kit # 6580 & 6584) 2" Dodge Ram 3500 (used in kit # 6592) 2" 6588 COMPONENTS TRUCKS + SUVS MUSCLE CARS FORD / Truck Applications Ford F-150 Short Bed Only (used in kit #6419) 2" Ford F-150 Extended Cab (used in kit #6417) 3" Ford F-150 Standard Cab (used in kit #6415) 3" Ford Ranger, Mazda B-2300 /3000 / (Rear- kits 6410/6412) 2" Ford Ranger, Mazda B-2300 / 3000 / 4000 (Front-kits ) 2" Ford Ranger, Mazda B-2300 /3000 / 4000 Std. Cabs 4" Ford Ranger, Mazda B-2300 / 3000 / 4000 Ext. Cabs 4" 6412 NOTES: 61

64 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS FLIP KITS, C- SECTIONS YEAR MODEL CHEVROLET Colorado Colorado / Canyon Std, Ext, & Quad Cabs 4 & 5 Cylinder CHEVROLET S-Series DESIRED DROP FLIP KIT PART No. C- SECTION ONLY SADDLES U-BOLTS U-BOLT PLATES CROSSMEMBERS SHOCK EXTENSIONS BUMP STOPS C-SECTIONS C-SECTION TEMPLATE DRIVELINE CONNECTIONS LEAF SPRING HANGERS HARDWARE 6603 x x Chevrolet/GMC S-10 C-Notch 6602 x x CHEVROLET Fullsize Truck /2 Ton Chev/GMC Ext & Quad Cab 5"-6" 6521 x x x x x x x /2 Ton Chev/GMC Std Cab 7" 6522 x x x x x /2 Ton Chev/GMC - Std. cab w/ 5.25" Frame 6" x x x x x x x x /2 Ton Chev/GMC Crew Cab Only 4"-5" 6519 x x x x x x x x /2 Ton Chev/GMC - Ext. cab w/ 5.25" Frame 6" x x x x x x x x x /2 Ton Chev/GMC (Std. cab w/ 5" Frame) 6" x x x x x x x x /2 Ton Chev/GMC (Ext. cab w/ 5" Frame) 6" x x x x x x x x x /2 Ton Chev/GMC (SS454 only) 6" x x x x x x x x x /4 Ton Chev/GMC (All cabs) 8" x x x x x x x x x Ton Chev/GMC (All cabs) 8" x x x x x x x x x /4 Ton Chev/GMC (All cabs-six lug) 6" x x x x x x x x x /2 Ton Chev/GMC (Ext. cab) SUPER C-NOTCH 6608 x x x x /2 Ton Chev/GMC (Ext. cab) 6" x x x x x x x x x /2 Ton Chev/GMC (Std. cab) 6" x x x x x x x x /2 Ton Chev/GMC 6" x x x x x x x /2 Ton Chev/GMC Blazer, Jimmy, Suburb. 6" 6852 x x x x x CHEVROLET SUV /2 Ton Suburban 7" x x x x x x x x x x Tahoe, Yukon (2 Door only) 5.5" x x x x x x x x x x /4 Ton Suburban (6 Lug) 7" x x x x x x x x x x /2 Ton Suburban 7" x x x x x x x x x x /4 Ton Suburban (6 Lug) 7" x x x x x x x x x x Suburban 7" 6852 x x x x x CHEVROLET VANS Astro/Safari 3.5" 6302 x x x x x w/ Factory Steel Leaf Astro / Safari w/ Factory Composite Leaf CONTENT OF FLIP KITS 2.5" 6300 x x x x x NOTES A Belltech AirJack Kit is highly recommended. 4" Ext. Cab must use # " Ext. Cab must use #4985 driveline alignment kit. 4" Ext. Cab must use # " Ext. Cab must use #4985 driveline alignment kit. A Belltech AirJack Kit is highly recommended. Rear leaf springs require 2" re-arch for adequate clearance. A Belltech AirJack Kit is highly recommended. Tahoe flip kits require an experienced installer. Please call for information before you attempt installation. A Belltech AirJack Kit is highly recommended. Fits 3" (most common) axle housings only. Rear leaf springs require 2" rearch for adequate clearance. All except All Wheel Drive" models When using a flip kit on a sway bar equipped Astro Van it's necessary to change the swaybar to Part #5528. NOTES: 62

65 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: FLIP KITS, C- SECTIONS - continued YEAR DODGE TRUCKS MODEL DESIRED DROP FLIP KIT PART No. C- SECTION ONLY SADDLES U-BOLTS U-BOLT PLATES CROSSMEMBERS SHOCK EXTENSIONS BUMP STOPS C-SECTIONS C-SECTION TEMPLATE DRIVELINE CONNECTIONS LEAF SPRING HANGERS HARDWARE Ram Std. Cab (Including Hemi) 5" x x x x x x Ram Quad Cab (Including Hemi) 5" x x x x x x Ram 1500 Std. Cab 8Cyl. (Auto Trans Only) 6" x x x x x x x x x x Ram 1500 Ext. Cab 8Cyl. (Auto Trans Only) 6" x x x x x x x x x x FORD TRUCKS F-150 Std. Ext. & Quad Cabs 5" 6440 x x x x x x x x F-150 Std. Ext. & Quad Cabs 5" 6440 x x x x x x x F-150 Std. Ext. Cab 6" x x x x x x x x x F-150 Crew Cab 6" x x x x x x x x x F-150 Standard Cab 6" x x x x x x x x x F-150 Extended Cab 6" x x x x x x x x x Ranger Standard Cab 5.5" x x x x x x x x Ranger Extended Cab 5.5" x x x x x x x x IMPORT TRUCKS CONTENT OF FLIP KITS Mazda B-Series Std. Cab 5.5" x x x x x x x x Mazda B-Series Ext. Cab 5.5" x x x x x x x x Nissan Titan (includes lifting leaf springs) 4" 6450 x x x x x x Toyota Tundra - V8 only 4" 6540 x x x x x x LOWERING BLOCK KITS YEAR MODEL CHEVROLET / Truck Applications DROP 1" DROP 2" DROP 3" All Mini & Midsize Pickups with 2.5" & 3" Wide Leaf Springs All Mini & Midsize Pickups with 2.5" & 3" Wide Leaf Springs 2 Taper All Chevrolet/GMC Colorado/Canyon SHOCK EXTENSIONS DROP 4" NOTES NOTES For Extended Cab applications use Lowering Blocks #6202-3"drop with 2 taper, or #6102-2" block with 2 taper. (Notes not applicable to the 4" drop app.) COMPONENTS TRUCKS + SUVS MUSCLE CARS YEAR MODEL PART No. NOTES CHEVROLET TRUCKS Chevrolet/GMC Tahoe/Suburban/Yukon/Yukon XL Chevrolet/GMC 1/2 Ton All Cabs (Used in kits 6612,6614) Chevrolet Suburban Chevrolet/GMC C Piece (used in kits 6605, 6607, 6650, 6505, 6905, 6926) Chevrolet/GMC C-1500 Upper Shock Mount 6658 FORD TRUCKS Ford F-150 Std. & Ext. Cabs Ford F-150 Quad Cab 6657 NOTES: 63

66 2011 APPLICATION GUIDE SHACKLE + HANGER KITS MUSCLE CARS TRUCKS + SUVS COMPONENTS YEAR MODEL DROP 3" DROP 4" DROP 5" FOOTNOTES CHEVROLET / GMC Fullsize Truck Applications /2 Ton Chev/GMC Exended Cab Short Bed Only /2 Ton Chev/GMC Standard Cab Short Bed Only /2 Ton Chev/GMC Crew cab 6519 Adjustable rear spring hanger GM HD 1500 (8 lug) w/ factory 6 hole hanger /2 Ton Chev / GMC Extended Cab /2 Ton Chev / GMC Standard Cab /2 Ton Chev / GMC (SS 454 only) /2 Ton Chev / GMC GM HD 2500 (8 lug) w/ factory 8 hole hanger GM HD 2500 (8 lug) w/ factory 8 hole hanger /4 Ton Chev/GMC Crew Cab /4 Ton Chev/GMC Standard & Extended Cabs /4 Ton Chev/GMC All Cabs /4 Ton Chev/GMC (Six lug - All Cabs) GM HD 3500 (8 lug) w/ factory 10 hole hanger Ton Chev/GMC Crew Cabs Ton Chev/GMC Standard & Extended Cabs Ton Chev/GMC All Cabs Ton Chev/GMC (Crew Cab & Dually only) 6750 CHEVROLET/ GMC SUV Applications Tahoe, Yukon (4 Door only) 6636 DODGE TRUCK Applications Ram 1500 Standard Cab 8 Cylinder (All except Long Bed) Ram 1500 Extended Cab 8 Cylinder (All except Long Bed) Dakota Standard, Extended & Quad Cabs Dakota Standard Cab 8 Cylinder Ram 2500 V-10 & Diesel Ram 3500 V-10 & Diesel 6592 FORD TRUCK Applications F-150 Standard, Extended & Crew Cab F-150 Lightning 6415 RECO: C-Section kit for additional travel For increased suspension travel use #6911 C-Section Frame Kit. For increased suspension travel use #6911 C-Section Frame Kit. 4" Ext. Cab must use # " Ext. Cab must use #4985 driveline alignment kit. For increased suspension travel use #6911 C-Section Frame Kit Must use #6431 C-Section Frame Rail Kit w/hanger kit F-150 Standard Cab F-150 Extended Cab F-250/F-350 Standard, Cab, Crew Cab F-250/F-350 Extended Cab Dually Only 6422 NOTE: This ENTIRE list is for Shackle AND Hanger kits only. NOTES: 64

67 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: SPRINGS YEAR MODELS CHEVROLET SUV Applications (WITH FACTORY AUTO RIDE ) Tahoe, Yukon, Suburban, Yukon XL, Escalade (WITHOUT FACTORY AUTO RIDE ) 2.5" or 3.5" 2" 3" 4" 5" 3" or 4" 2" 3" 4" 5" Tahoe, Yukon Yukon XL, Suburban Avalanche (WITH FACTORY PREMIUM RIDE ) 2" or 3" 1" 2" 3" 4" Tahoe, Yukon, Suburban, Yukon XL Avalanche (WITHOUT FACTORY PREMIUM RIDE ) 3" or 4" 4" or 5" 2" 3" 4" 5" Tahoe, Yukon, N/A Suburban, Yukon XL N/A Avalanche Trailblazer, Envoy 2WD/4WD SSR 4230 CHEVROLET Full Size Trucks 1.5" 3" 4" 5" 2" 3" 4" 5" 2" 3" 4" 5" /2 Ton C-Pickup DODGE Truck BELLTECH "PRO" SPRING & SPACER KIT 2" 3" 4" 5" Ram Std. Cab Ram Crew Cab 5318 FORD SUV Applications DESIRED DROP Ford Explorer 5310 (2.5") Ford Expedition, Navigator (2WD) Ford Expedition, Navigator (2WD) Ford Expedition, Navigator (2WD) 5308 NOTES: BELLTECH SPRINGS DESIRED DROP 2" 3" 4" 5" 2" 3" 4" 5" NOTE: All rear SUV kits come with bumpstops. NOTES Springs are designed to be used with Belltech shocks only Springs are designed to be used with Premium Ride Suspension only Springs are designed to be used with Belltech shocks only OEM Shock not recommended. Use part # 2212FF for propr length. COMPONENTS TRUCKS + SUVS MUSCLE CARS 65

68 2011 APPLICATION GUIDE MUSCLE CARS TRUCKS + SUVS COMPONENTS LEAF SPRINGS YEAR MODEL DROP PART No. NOTES CHEVROLET / Colorado Stand., Ext., & Quad Cabs 4 & 5 Cylinder 3" 5953 CHEVROLET / S Series Stand., & Ext., Cabs 4 & 6 Cylinder 3" Blazer/Jimmy 3" Blazer/Jimmy 3" Blazer/Jimmy 3" 5954 CHEVROLET / Full Size Truck /2 Ton Chev (Std. & Ext. cab) 3" /2 Ton Chev (Std. & Ext. cab) 4" 5950 CHEVROLET / SUV Suburban & 6 Lug 3/4 Ton 3" Tahoe, Yukon (2 Door only) 3.5" 5960 CHEVROLET / Astro Van Astro/Safari (with factory steel leaf) 3" 5958 All except All Wheel Drive" models DODGE TRUCKS / All Ram 1500 Std. & Quad Cab (include. HEMI) 3" Ram 1500 Std. Cab (include. HEMI) 3.5" Ram 1500 Quad Cab (include. HEMI) 3" Ram 1500 Ext. Cab 8Cyl. (All except Long Bed) 4" Dakota Std. Ext. & Quad Cabs 3" Durango 2" 5984 FORD TRUCKS / All F-150 Std. Ext. & Quad Cabs 3" F-150 Std. Ext. & Crew Cab 3" Ranger Std. & Ext. Cab 3" Ranger Std. & Ext. Cab 4" 5970 IMPORT TRUCKS / All Isuzu Hombre 4 & 6 Cyl. 3" Mazda B-Series Std & Ext. Cab 3" Mazda B-Series Std & Ext. Cab 4" Mazda B-Series Std & Ext. Cab 3" Nissan Pickup & Hardbody 3" Toyota Pickup 3" Toyota Pickup 3" 5976 DRIVE LINE ALIGNEMENT KITS DRIVE LINE ALIGNMENT KITS When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke YEAR MODEL PART No. CHEVROLET / GMC Chevrolet/GMC C-1500 Extended Cab w/ 2 piece driveshaft (Center carrier bearing adjuster bracket) Chevrolet/GMC C-1500 / 2500 / 3500 Pickup w/ 2 piece driveshaft (angle correction kit w/ 4" drop) Chevrolet/GMC C-1500 / 2500 / 3500 Pickup w/ 2 piece driveshaft (angle correction kit w/ 6" drop) 4985 DODGE Trucks Dodge Ram 1500 Pickup w/ 2 piece driveshafts (angle correction kit w/ 4" drop) FORD Trucks Ford F-150 Extended Cab w/ 2 piece driveshaft (angle correction kit w/ 4"-7" drop) 4990 PINION SHIMS All 1 Pinion Shim for Pickups with 2.5" & 3" Wide Leaf Springs Pinion Shim for F All 2 Pinion Shim for Pickups with 2.5" & 3" Wide Leaf Springs 4975 All 3 Pinion Shim for Pickups with 2.5" & 3" Wide Leaf Springs 4976 All 4 Pinion Shim for Pickups with 2.5" & 3" Wide Leaf Springs 4977 All 6 Pinion Shim for Pickups with 2.5" & 3" Wide Leaf Springs 4979

69 FIND PRODUCT UPDATES AT BELLTECH.COM INFO HOTLINE: AIRJACK SUSPENSION KITS YEAR APPLICATION DESIRED DROP NOTES CHEVROLET S-Series Apps Stock 2" 4" 5" 6" Pickup all cabs CHEVROLET Fullsize Truck Apps /2 Ton Chev/GMC (All cabs without c-sections) 5004 Stock 2" 4" 6" 8" /2 Ton Chev/GMC (All cabs with c-sections) /2 Ton & 3/4 Ton Chev/GMC (All Cabs) Ton Chev/GMC (8 Lug - All Cabs) Ton 3500HD 5015 CHEVROLET SUV Apps Stock 2" 3" 4" 7" Tahoe, Yukon Suburban, Yukon XL Avalanche Suburban FORD SUV Apps Stock 2" 3" Fits all except 8 lug single wheel bolt pattern. V6 applications must use factory bolt part number w s426 (qty.4) to mount sway bar end links Max. rear wheel back spacing: 4.5". Fits all except 8 lug single wheel bolt pattern Expedition/Navigator (W/ Factory rear coil spring) Kit only contains two air assist springs DODGE Truck Apps Stock 2" 4" 6" 7" Ram 1500 (all cabs) 5028 Kit only contains two air assist springs Ram 1500 Standard Cab - 8 Cylinder Ram 1500 Extended Cab - 8 Cylinder Ram 3500 V-10 & Diesel 5054 Stock 2" 4" 5" 6" UNIVERSAL KITS 1/2 Ton Full Size Pickups w/ Rear Leaf Springs Mid & Mini Pickups w/ Rear Leafs AIRJACK COMPRESSION COMPRESSOR KITS + ACCESSORIES KITS + ACCESSORIES Replacement Air Compressor only (Viair) Air line kit DESCRIPTION Air compressor kit w/ air tank PART No Air compressor kit without air tank 5096 TRANSMISSION CROSS MEMBER YEAR MODEL PART No. CHEVROLET / GMC Chevrolet/GMC Colorado / Canyon Chevrolet/GMC Heavy Duty 3500 (Allison transmission only) Dodge Ram (automatic transmission only) 6684 Kit only contains two air assist springs COMPONENTS TRUCKS + SUVS MUSCLE CARS UNIVERSAL BUMP STOPS UNIVERSAL BUMPSTOPS Foam Bump Stop-Universal Cone 1.26" tall x 2.5" OD Foam Bump Stop-Universal Cone 2.01 tall x 2.5" OD Foam Bump Stop-Universal Cone 3.01" tall x 2.5" OD Foam Bump Stop-Direct Rear replacement GM SUV 2.75" tall x 3.31 OD NOTES: 67

70 2011 APPLICATION GUIDE KW automotive, Inc. warrants to the original purchaser of Belltech suspension products, (spindles, springs, shackle and hanger kits, flip kits and blocks), that these products will be free of manufacturing defects so long as such purchaser owns the vehicle on which such products were originally installed. Bushings, bump stops and ball joints are considered subject to wear and are excluded from this warranty. Bushings, bump stops and ball joints are warranted for a period of 90 days from the time of purchase. How to file a warranty claim If the product should become defective during the warranty period, return it to the original place of purchase along with the original receipt for a determination of claim. What if... If the product cannot be returned to the original place of purchase please call: and ask for RGA # (Return Goods Authorization Number). After receiving your number, return the product prepaid along with the original receipt to: WARRANTY INFORMATION KW automotive North America, Inc., Attention: Warranty Claims, 1075 North Ave., Sanger, California Together with proof of purchase receipt and a letter stating the nature of the defect. Make sure that the RGA# is clearly written visible on the returned items. Items not bearing RGA # will be refused and sent back. Upon approval, you will receive the replacement product at no charge. Belltech Street Performance and Nitro Drop 2 shocks are warranted against defects in materials and workmanship for a period of 2 years (unlimited mileage) as long as the vehicle has been operated under normal conditions. Please take a look at the How to.. section on the right for more information on how to file a warranty claim. Warranty - Further Information KW automotive understands your vehicle is a major investment; our commitment is to supply you with the finest products available. Products that fit properly work perfectly and out perform anything on the market today. We backup this commitment with a Limited Warranty. For further information regarding warranties please contact our corporate headquarters at: KW automotive North America, Inc North Avenue Sanger, California Phone: Toll free US: California and outside US: Fax:

71

72 1075 North Avenue Sanger, California P: F: belltech.com Full Product / Applicaton Listings for 2011 Part # , Belltech is a registered trademark of KW Automotive North America, Inc.