MERITOR DRIVELINE QUICK REFERENCE GUIDE IDEAS DRIVING RESULTS

Size: px

Start display at page:

Download "MERITOR DRIVELINE QUICK REFERENCE GUIDE IDEAS DRIVING RESULTS"

Chrystal Gardner
5 years ago
Views:

1 MERITOR DRIVELINE QUICK REFERENCE GUIDE IDEAS DRIVING RESULTS

IMPORTANT INFORMATION DISCLAIMER Information contained in this publication is in effect at the time the publication was approved for printing and is subject to change without notice or liability.

2 IMPORTANT INFORMATION DISCLAIMER Information contained in this publication is in effect at the time the publication was approved for printing and is subject to change without notice or liability. Meritor, reserves the right to revise the information presented or discontinue the production of parts described at any time. Manufacturers names, part numbers, symbols or other references appearing in this catalogue are used for reference for order of goods only. Images are also for reference only and not to scale. COPYRIGHT All rights reserved. The Meritor or any part or layout of the catalogue cannot be printed or reproduced without written authorisation from Meritor. Found an error? If you detect any errors in this catalogue, please let us know. We want to ensure the information we publish is as accurate as possible. We appreciate your help in making this happen. Please forward your enquiries to: Phone: (03)

3 INDEX MERITOR DRIVELINE QUICK REFERENCE GUIDE Intro - MXL Construction / Centre Bearings / Slip Yokes... 2 Meritor Numbering System - Meritor Engineering & Aftermarket Series Series Series Series Series Series Series Series Series Series SPL 170 Series SPL 250 Series RPL 20R Series RPL 25R Series Centre Bearings Universal Joints - Meritor Universal Joints - Dana Fast Moving Universal Joints End Yokes Parts For Meritor Drive Axles Driveline Components - Exploded View Miscellaneous Notes QUICK REFERENCE FOR PART S AND CORRESPONDING SERIES PREFIXES Series SPL 170 SPL 250 RPL 20R RPL 25R Parts Prefix 131N 133N 135N 141N 148N 155N 16N 17N 176N 18N 170N / 170TYS 250N / 250TYS 20WYS 25RY / 25WYS / 25RL / 25RPL

MXL U-JOINT CONSTRUCTION MXL U- JOINTS - SOLID CONSTRUCTION INSIDE AND OUT.

Presicion-ground, Precision-ground, large-diameter trunnions Retained - needle bearings provide quick and trouble - free installation Advanced nitrile, triple lip

ALIGNING Accommodates +/- 5-degree driveline angularity Sealed bearing with integral deflector shield and grease barrier protects the bearing against contamination

Solid SLIP YOKES Compatible With other industry-standard yokes Available With both easy-service and full-round yoke designs Completely interchangeable With most

4 MXL U-JOINT CONSTRUCTION MXL U- JOINTS - SOLID CONSTRUCTION INSIDE AND OUT... Centre-point cover plate and domed cup Nylon thrust washers eliminate metal-to-metal contact, reducing wear and extending life Superior bearing package Presicion-ground, Precision-ground, large-diameter trunnions Retained - needle bearings provide quick and trouble - free installation Advanced nitrile, triple lip sealing system keeps lubrication in and contaminants out, for longer life Corrosion - resistant seal guard protects and secures advanced slip seal CENTRE BEARING - SELF ALIGNING Accommodates +/- 5-degree driveline angularity Sealed bearing with integral deflector shield and grease barrier protects the bearing against contamination without use of external deflectors PART CB XSA CB XSA CB XSA 17N APPLICATION 17N (Heavy -Duty), 176N & 18N - Slotted 17N (Heavy-Duty), 176N & 18N - Solid SLIP YOKES Compatible With other industry-standard yokes Available With both easy-service and full-round yoke designs Completely interchangeable With most greasable drivelines Allows driveline standardisation regardless of vehicle make PART 17N X MXL 17N X MXL 17N X MXL 17N X MXL 18N X MXL 18N X MXL 18N X MXL PART 17NSLIP 18NSLIP SLIP & STUB ASSEMBLY 17N X MXL + 17N N X MXL + 18N

5 ING SYSTEM COMPANION FLANGES AND FLANGE YOKES Meritor components may be identified by one of the numbering systems shown below. Aftermarket numbers are issued to make Meritor components easy to select when choosing a replacement component. MERITOR ENGINEERING 148 N Y S B 28-4 DRIVELINE SERIES ENGINEERING PART INTERNAL MERITOR SIZE OF HOLE, SHAFT, OR PART DESIGNATION (DIVIDE BY 16) TYPE OF PART Y - Yoke F - Flange TYPE OF HOLE S - Splined SB - Splined Brake Drum MERITOR AFTERMARKET MERITOR AFTERMARKET 148 N DRIVELINE SERIES ENGINEERING PART INTERNAL MERITOR DESIGNATION TYPE OF PART 1 - Companion Flange 2 - Flange Yoke 3

6 ING SYSTEM SLIP YOKES Meritor components may be identified by one of the numbering systems shown below. Aftermarket numbers are issued to make Meritor components easy to select when choosing a replacement component. MERITOR ENGINEERING 17 N L S 40-98A DRIVELINE SERIES ENGINEERING PART INTERNAL MERITOR SIZE OF HOLE, SHAFT, OR PART DESIGNATION (DIVIDE BY 16) TYPE OF YOKE LS - Slip Yoke MERITOR AFTERMARKET MERITOR AFTERMARKET 16 N X DRIVELINE SERIES ENGINEERING PART INTERNAL MERITOR DESIGNATION TYPE OF PART 3 - Slip Yoke 4

7 ING SYSTEM END YOKE - FULL ROUND Meritor components may be identified by one of the numbering systems shown below. Aftermarket numbers are issued to make Meritor components easy to select when choosing a replacement component. MERITOR ENGINEERING MERITOR ENGINEERING 16 N Y S DRIVELINE SERIES ENGINEERING PART INTERNAL MERITOR SIZE OF HOLE, SHAFT, OR PART DESIGNATION (DIVIDE BY 16) TYPE OF PART Y - Yoke TYPE OF YOKE S - Splined R - Round T - Tapered Hole Yoke 20 W Y S 32-1 DRIVELINE SERIES ENGINEERING PART MERITOR DESIGNATION SIZE OF HOLE, SHAFT, OR PART R - Permalube Full Round (DIVIDE BY 16) W - Permalube Wing Style TYPE OF PART Y - Yoke TYPE OF YOKE S - Splined LS - Slip Yoke SC - Splined Coupling Yoke SM - Shaft Yoke MERITOR AFTERMARKET MERITOR AFTERMARKET 16 N DRIVELINE SERIES INTERNAL MERITOR DESIGNATION TYPE OF PART 4 - End Yoke ENGINEERING PART 5

8 ING SYSTEM END YOKE - EASY SERVICE Meritor components may be identified by one of the numbering systems shown below. Aftermarket numbers are issued to make Meritor components easy to select when choosing a replacement component. MERITOR ENGINEERING 16 N Y S DRIVELINE SERIES ENGINEERING PART INTERNAL MERITOR DESIGNATION SIZE OF HOLE, SHAFT, OR PART (DIVIDE BY 16) TYPE OF YOKE S - Splintered TYPE OF PART Y - Yoke MERITOR AFTERMARKET MERITOR AFTERMARKET 16 N DRIVELINE SERIES DESIGNATES EASY SERVICE YOKE ENGINEERING PART INTERNAL MERITOR DESIGNATION TYPE OF PART 4 - End Yoke 6

9 ING SYSTEM WELD YOKE Meritor components may be identified by one of the numbering systems shown below. Aftermarket numbers are issued to make Meritor components easy to select when choosing a replacement component. MERITOR ENGINEERING 155 N Y DRIVELINE SERIES ENGINEERING PART INTERNAL MERITOR SIZE OF HOLE, SHAFT, OR PART DESIGNATION (DIVIDE BY 16) TYPE OF PART Y - Yoke MERITOR AFTERMARKET MERITOR AFTERMARKET 16 N DRIVELINE SERIES ENGINEERING PART INTERNAL MERITOR DESIGNATION TYPE OF PART 28 - Weld Yoke 7

10 ING SYSTEM BEARING STUBS AND SPLINE PLUGS Meritor components may be identified by one of the numbering systems shown below. Aftermarket numbers are issued to make Meritor components easy to select when choosing a replacement component. MERITOR ENGINEERING P S TYPE OF PART P - Plug (Spline) TYPE OF HOLE S - Splined ENGINEERING PART OF SPLINES SIZE OF HOLE, SHAFT, OR PART (DIVIDE BY 16) MERITOR AFTERMARKET MERITOR AFTERMARKET 131 N DRIVELINE SERIES ENGINEERING PART INTERNAL MERITOR DESIGNATION TYPE OF PART 40 - Spline Plug 8

11 ING SYSTEM SHAFT YOKE Meritor components may be identified by one of the numbering systems shown below. Aftermarket numbers are issued to make Meritor components easy to select when choosing a replacement component. MERITOR ENGINEERING 17 N Y S M DRIVELINE SERIES INTERNAL MERITOR DESIGNATION TYPE OF PART Y - Yoke TYPE OF YOKE SM - Shaft Yoke ENGINEERING PART SIZE OF HOLE, SHAFT, OR PART (DIVIDE BY 16) MERITOR AFTERMARKET MERITOR AFTERMARKET 17 N DRIVELINE SERIES ENGINEERING PART INTERNAL MERITOR DESIGNATION TYPE OF PART 82 - Shaft Yoke 9

12 ING SYSTEM CLAMP AND SLIP YOKE Meritor components may be identified by one of the numbering systems shown below. Aftermarket numbers are issued to make Meritor components easy to select when choosing a replacement component. MERITOR ENGINEERING L6N Y S DRIVELINE SERIES ENGINEERING PART INTERNAL MERITOR DESIGNATION TYPE OF PART L - Slip Yoke Y - Yoke SIZE OF HOLE, SHAFT, OR PART (DIVIDED BY 16) 2014 Meritor, Inc. n USA, PB-9895 Revised (47865/67147) 10

13 1310 SERIES U-Joint Kit X CP1201X Full Round 5-134X CP134X Full Round 5-153X CP153X Full Round 5-353X CP353X Full Round Slip Yokes KX 131N3128KX KX KX 131N38001KX 131N38021KX Tube Shafts N N N N N N Flange Yoke N N N2939 Tube Yokes N N N N N N N28437 End Yokes N N SERIES U-Joint Kit X CP1204X Full Round 5-134X CP134X Full Round 5-213X CP213X Full Round Slip Yokes KX 133N38041KX Tube Yokes N N N N

14 1350 SERIES U-Joint Kit 5-178X CP178X Full Round Slip Yokes KX 135N31501KX Midship Tube Shafts KX 135N3488KX KX 135N3598KX N Flange Yoke N2119 Tube Yokes N N N SERIES U-Joint Kit 5-160X CP160X Full Round Slip Yokes KX 141N3118KX KX 141N3508KX Midship Tube N Shafts Flange Yoke N N2429 Tube Yokes N N2897 End Yokes N SERIES U-Joint Kit 5-188X CP188X Full Round Slip Yokes KX 148N31601KX LD & MD Driveshaft Style Flange Yoke N2479 Snap Ring Design Tube Yokes N N SERIES U-Joint Kit 5-155X CP155N Full Round Slip Yokes KX 155N31241X LD & MD Driveshaft Style Flange Yoke N2669 Snap Ring Design Tube Shafts N

15 1610 SERIES U-Joint Kit 5-279X M279X Full Round 5-674X M674X Half Round Slip Yokes KX 16N3108X HD Driveshaft Style KX 16N32261X HD Driveshaft Style KX 16N3288X HD Driveshaft Style Tube Shafts N Midship Tube N53141 Outboard Slip Yokes Shafts Flange Yoke N2279 Bearing Plate Design N2629 Bearing Plate Design Tube Yokes N28627 End Yokes N N X 16N44441X X 16N44451X X 16N448411X N N NYS38-12A 16TYS TYS32-76A Deflector/Slinger Z DEFR472 Bearing Strap Kit X KT16SB To maintain product integrity, it is essential that Genuine Meritor bolts or screws are used to replace ANY removed when inspecting OR during installation of a NEW 1610 MXL Universal Joint (hardware included with NEW kits). Full Round: Cap Screws (Part No. S155B2) x 8 Half Round: Cap Screws (Part No. S155B2) x 4 & Bearing Strap Kit (Part No. KT16SB) x SERIES U-Joint Kit 5-280X M280X Full Round 5-675X M675X Half Round Slip Yokes KX 17N32671XMXL KX 17N32401X HD Driveshaft Style KX 17N32401XMXL KX 17N32651X HD Driveshaft Style Slip & Stub Assembly KX 17N3265XMXL Combined Meritor Part Number N NSLIP HD Driveshaft Style 13

16 1710 SERIES - CONT D Tube Shafts N N40541 Midship Tube N53201 Companion Flange or End Yoke Design Shafts N53311 Companion Flange or End Yoke Design Flange Yoke NF1 Bearing Plate Design Tube Yokes N N Z936 Yoke Shafts N End Yokes N N N N N N N N X 17N44291X X 17N44301X X 17N44361X X 17N44481X N N X 17N44741X N X 17N45061X X 17N45111X N X 17N45461X X 17N45481X N N X 17N45961X X 17N46021X N N X 17N463911X X 17N46391X X 17N46411X X 17N46421X N N

17 1710 SERIES - CONT D End Yokes X 17N46871X X 17N46891X X 17N46921X X 17N46931X X 17N46941X X 17N46951X X 17N469611X X 17N46961X X 17N471811X X 17N47181X N N X 17N476411X X 17N47851X X 17NYS2866A X 17N48531X X 17N48551X X 17N49001X X 17N49031X X 17N49041X NYS NYS X 17NYS32-99A X 17NYS3418A X 17NYS3419A1 17NYS NYS38-17A X 17N47771X X 17TYS3260A TYSC TYSC N Deflector/Slinger DEFR621 Bearing Strap Kit X KT17SB To maintain product integrity, it is essential that Genuine Meritor bolts or screws are used to replace ANY removed when inspecting OR during installation of a NEW 1710 MXL Universal Joint (hardware included with NEW kits). Full Round: Cap Screws (Part No. S165B2) x 8 Half Round: Cap Screws (Part No. S165B2) x 4 & Bearing Strap Kit (Part No. KT17SB) x 1 15

18 1760 SERIES U-Joint Kit 5-677X M677X Half Round 5-407X M407X Full Round End Yokes X 176N43311X X 176N4181X NYS X 176N47811X Bearing Strap Kit X KT17SB To maintain product integrity, it is essential that Genuine Meritor bolts or screws are used to replace ANY removed when inspecting OR during installation of a NEW 1760 MXL Universal Joint (hardware included with NEW kits). Full Round: Cap Screws (Part No. S165B2) x 8 Half Round: Cap Screws (Part No. S165B2) x 4 & Bearing Strap Kit (Part No. KT17SB) x SERIES U-Joint Kit 5-324X CP18N-96 Conversion - 9C Series 5-281X M281X Full Round 5-676X M676X Half Round Weld Yoke N28117 Standard N28127 Heavy Duty Splined End Yokes X 18N42341X N42701 SSHD Late N N43201 RT N43021 Eaton / Spicer N43251 VARIOUS N43371 RT N43491 RT14613/14615/14715/15613/14615/16718B/1 6609/16613/16618/18718B AAnd various other models With Hub Seal NYS NYS45 RT14/15/16/18/20 SERIES Slip Yokes KX 18N31351X-MXL KX 18N31371XMXL KX 18N31431XMXL Slip & Stub Assembly KX 18N31371XMXL Combined Meritor Part Number 18N NSLIP Midship Tube N5351 Shafts BSS N N5391 Tube Shafts PS Long HD Driveshaft Style 16

19 1810 SERIES - CONT D Stub N40191 Long Male N40201 Standard Male Slinger X 18N43221X X X X X X X X 18N43281X 18N43381X 18N43551X 18N43561X 18N43581X 18N43731X 18N43921X End Yokes N41891 Full Round N Half Round X 18N42361X Full Round X X 18N42531X 18N42271X X 18N42711X Splined Holes N43021 SP B N Half Round X 18N432211X NYS38-15 Full Round End Yokes N Half Round X 18N435611X Half Round 18NYS34-3A N X 18N43691X X 18N437311X Half Round X 18TYS3827A SP H X 18N44351X SP B X 18NYS3620A X 18N445711X Half Round X 18N44611X X 18TYS38-27A With Splined Holes (inc. Slinger) X 18N439211X 18N43931 Bearing Strap Kit X KT17SB IN 6.0HR To maintain product integrity, it is essential that Genuine Meritor bolts or screws are used to replace ANY removed when inspecting OR during installation of a NEW 1810 MXL Universal Joint (hardware included with NEW kits). Full Round: Cap Screws (Part No. S165B2) x 8 Half Round: Cap Screws (Part No. S165B2) x 4 & Bearing Strap Kit (Part No. KT17SB) x 1 17

20 SPL 170 SERIES U-Joint Kit SPL170-3X US170X SPL170 End Yokes X 170TYS383A1 SPL X 170TYS381A SPL TYS321 SPL X 170TYS321A SPL X 170TYS384A SPL X 170TYS382A SPL N2827 SPL 170 Quick Disconnect SPL 250 SERIES U-Joint Kit SPL 250-3X US250X SPL 250 End Yokes N4211 SPL 250 Quick Disconnect N42711 SPL X 250TYS382A SPL X 250TYS381A SPL N2817 Weld Yoke SPL 250 RPL 20R SERIES U-Joint Kit CP20RPLS RPL20 Series End Yokes 20WYS328A Spline 20WYS WYS WYS32-6A 20WYS32-2P 20WYS34-2A 20WYS34-4A 20WYS38-11A 20WYS38-3A 20WYS38-4A 20WYS38-8A 20WYS40-2A 20WYS44-2A 20WYS Spline 2-39 Spline 2-39 Spline Spline Spline Spline Spline Spline Spline Spline Spline Spline Spline 18

21 RPL 25R SERIES U-Joint Kit CP25RPLS SPL 25 Series End Yokes 25RY68-3 Weld Yoke 25WYS36-1A 25WYS38-13A 25WYS38-6A 25WYS38-8A 25WYS44-2A 25WYS45 25WYSC WYS38-9A1X Spline Spline Spline Spline Spline Spline Spline Spline SLIP YOKE 25RLS481A 25RPLSLIP To maintain product integrity, it is essential that Genuine Meritor bolts or screws are used to replace ANY removed when inspecting OR during installation of a NEW Meritor RPL Universal Joint (RPL20R or RPL25R). Patch Lock Bolts (Part No. CSC82052) X 4 19

22 CENTRE BEARINGS Bearing Centre Assy Rub X CB X 1310/1330/1350/1410 Bearing Centre 141N X CB X 1410/1480/1550/1550HR Bearing Centre 141N X CB X 1410/1480/1550/1550HR Centre Assy X CB X 1480/1550/1610/1710/1880/SPL70 Bearing Centre 17N XB CB XSA SPL140/1610/1710 Bearing Centre Slotted XB CB XSA RPL25 Bearing Centre Slotted X CB XSA 1760/1710/1810 Bearing Centre Solid XB CB XSA RPL25/176N/17N/18N/85WB/92N/RPL25 Bearing Centre Solid X CB XSA 176N/18N 20

23 UNIVERSAL JOINTS - MERITOR U-Joint Kit CP18S3P3 CP58WB29.1P3 58WB Series CP58WB37.1P3 58WB Series CP58WB38.1P3 58WB Series CP58WBDWT 58WB Series CP58WBHB 58WB Series X CP62N47P3 62N Series CP62N48P3 62N Series CP62N49P3 62N Series CP62N78P3 62N Series CP72N116P3 72N Series CP72N121P3 72N Series CP72N165P3 72N Series CP72N90P3 72N Series CP72NDWT 72N Series CP82N72.1P3 82N Series CP82N74.1P3 82N Series CP82N76.1P3 82N Series CP82N90P3 82N Series CP82NHWDPL 82N Series CP850N4 850N Series CP85WB48P3 85WB Series CP85WB62P3 85WB Series CP85WB73P3 85WB Series CP85WBHWD 85WB Series CP85WBHWDPL 85WB Series CP92N106P3 92N Series CP92N115P3 92N Series CP92N66 92N Series CP92N66P3 92N Series CP92N71P3 92N Series CP92N72P3 92N Series CP92N73P3 92N Series CP92NDWT 92N Series CP92NHBPL 92N Series CP92NHWDPL 92N Series MCP380 Volvo MCP381 Volvo CP750N1 750N Series CPL15N1S L15 Series 21

24 UNIVERSAL JOINTS - DANA U-Joint Kit X CP3147X 3R Series 5-92X CPL6R50 L6 Series 5-105X CP105X 1110 Series 5-103X CP103X X CP1306X X CP170X X CP92NHWD 9C/1820 CP950N 950N FAST MOVING UNIVERSAL JOINTS U-Joint Kit 5-279X M279X Full Round 5-674X M674X Half Round 5-280X M280X Full Round 5-675X M675X Half Round 5-677X M677X Half Round 5-407X R407X Full Round 5-281X M281X Full Round 5-676X M676X Half Round Exploded View - Half Round Uni Joint Exploded View - Full Round Uni Joint 22

25 END YOKES PARTS FOR MERITOR DRIVE AXLES 140/145 FORWARD CARRIERS DESCRIPTION Yoke Input 1810 Full Round ( SPLINE,LARGE SHAFT) Yoke Input 1810 Half Round ( SPLINE,LARGE SHAFT) Yoke Input 1710 Full Round ( SPLINE,LARGE SHAFT) Yoke Input 1710 Half Round ( SPLINE,LARGE SHAFT) Yoke Input 1810 Full Round ( SPLINE,SMALL SHAFT) Yoke Input 1810 Half Round ( SPLINE,SMALL SHAFT) Yoke Input 1710 Full Round ( SPLINE,SMALL SHAFT) Yoke Input 1710 Half Round ( SPLINE,SMALL SHAFT) Yoke Output 1710 Full Round ( SPLINE,SMALL SHAFT) AFTERMARKET 18N43731X 18TY3827A 17N47181X 17N471811X 18N43381X 18N X 17N46411X 17N76411X 17NYS /145 REAR CARRIERS DESCRIPTION AFTERMARKET Yoke Input 1710 Full Round 17N46391X 160 FORWARD CARRIERS DESCRIPTION AFTERMARKET Yoke Input 1810 Full Round Yoke Input 1810 Half Round Yoke Output 1710 Full Round 18N43731X 18TYS3827A 17NYS REAR CARRIERS DESCRIPTION AFTERMARKET Yoke Input 1710 Full Round Yoke Input 1710 Half Round 17NYS3838A 17N47181X 180/185 & 380 FORWARD CARRIERS DESCRIPTION AFTERMARKET Yoke Input 1810 Full Round Yoke Input 1810T Half Round Yoke Output 1710 Full Round 18N43221X 18N432211X 17NYS /185 & 380 REAR CARRIERS DESCRIPTION AFTERMARKET Yoke Input 1710 Full Round Yoke Input 1810 Full Round 17N47851X 18N43581X 23

DRIVELINE COMPONENTS Instead of just replacing your driveline and components, why not install a better idea?

The Meritor XTended Lube MXL driveline can cut your lubrication costs in half.

Transmission End Yoke Output Weld Yoke Tubing Bearing Stub Centre Bearing Kit Splined Yoke End Yoke Input Front Axle

26 DRIVELINE COMPONENTS Instead of just replacing your driveline and components, why not install a better idea? Meritor drivelines and components result in greater distances, lower maintenance and a bigger R.O.I. The Meritor XTended Lube MXL driveline can cut your lubrication costs in half. With it s advanced nitrile seal, the MXL extends lube intervals to 80,000 kms. Transmission End Yoke Output Weld Yoke Tubing Bearing Stub Centre Bearing Kit Splined Yoke End Yoke Input Front Axle End Yoke Output Slip Yoke Seal Shaft Yoke End Yoke Input Rear Axle Slip Yoke Seal Spline Plug Tubing Weld Yoke Welch Plug SERVICE U-JOINT KITS STRAP & BOLT KITS: KT16SB KT17SB KT122 KT124 U-BOLT KITS: KT116 KT117 KT118 24

27 MISCELLANEOUS Deflector Yoke DEFR404 52N Deflector Yoke RPL DEFR /1710/1760/ DEFR421 SPL90/1410/1480/1550/1610/1650/ DEFR /1610/1710/1760/ DEFR4713 SPL140/1610/1710/ DEFR477 SPL140/1610/ DEFR504 SPL170/1610/ DEFR507 SPL90/SPL140/SPL170/1550/1610/1710/ DEFR541 SPL170/SPL250/1610/1710/1460/1810/ DEFR /1710/1760/1810/ DEFR / DEFR567 SPL90/SPL140/SPL170/SPL250/1610/1710/1810 Dust Caps/Yoke SERUR334 DEFR591 DEFR592 DEFR DEFR64 RPL 20R DEFR535 Seal Dust SERUR32-7 RPL 20R Seal Dust SERUR40-21 RPL 25R End Yoke 92NYS N End Yoke 92NYS N Flange Assembly FUI 180/150 PCD KV70 Z3260F1072 Hardware Kit R SPL140/SPL170/SPL250 Kit Strap & Capscrew X KT /1410 Kit Service X KT17SB 1710/1810 Kit Dust Cap/Wshr 1350/1410 RD Kit Dust Cap/Wshr 1410/1480 RD D3A ND3A 1350/1410 D3H DC148N1 1410/1480 Locknut 1227C939 Locknut Z /1610/1650/SPL90/1710/1760/1810/1880 Round Tubing RT Screw Cap S155B Screw Cap S165B2 1710/1760/1810 Slinger - CTR/BRG I.D DEFR /1810 Slip Yoke 9C NLS4847DC 92N 25

28 MISCELLANEOUS - CONT D Slip Yoke Assy WNG BRNG 72N Slip Yoke Assy WNG BRNG 72N Slip Yoke Assy WNG BRNG 92N 72NLS32142A 72NLS3220DC 92NLS4866A 72N 72N 92N Strap X 250N7018X SPL250 Strap REBC /1550 Strap Retainer REBC17S 1760/1710/1810 Tube Shaft SP PS /1880 U-Bolt Kit /1330 U/Joint U-Bolt Kit /1410 U/Joint U-Bolt Kit -1480/1550 U/Joint X KT /1310/ U-bolts and 4 Nuts each X KT / X KT /1550 Washer - Special WAR /HD/1760/1810/SPL70/SPL100/SPL140/ SPL170/SPL250/1810 BP Weld Yoke WNG BRNG 72N Yoke End Yoke Yoke Shaft Yoke & Deflector Assy Yoke Steering 72NY5220 L6NYS NYS NYSM381 92NYS38-52A L6NYS

29 NOTES 27

30 NOTES 28

31 Meritor Heavy Vehicle Systems 50 Calarco Drive DERRIMUT VIC 3030 AUSTRALIA Phone: (+61 3) Fax: (+61 3) meritor.com QRG002-05/16

MT155 DRIVE AXLE PARTS CATALOGUE

MT155 DRIVE AXLE PARTS CATALOGUE IMPORTANT INFORMATION AFTERMARKET PARTS WARRANTY We warrant all new parts for one year from date of shipment to the buyer against defective material or workmanship (but