Shelving. Displays. Reception

Transcription

1 Shelving Displays Reception 07 8

2 HIGHLIGHT Glass cabinets Expoline 3 from 459, Elegant, stable and lockable glass cabinets with 4 shelves which can be placed at the desired height. Each glass shelf has a maximum load capacity of 0 kg. The cabinet stands on 4 adjustable feet, enabling the cabinet to be placed safe and secure. Optional extras are a lighting set and castors. Square model (W 450 D 450 H 800 mm) # , Rectangular model (W 850 D 450 H 800 mm) # , 3 Round model (Ø 560 H 800 mm) # , a Lighting set: 5 0 W spotlights, incl. low voltage transformer and m cable # , b Set of castors: 4 castors, all lockable # 3768,

3 CONTENTS Coat stands & Racks Stainless-steel coat stands & Racks Coat stands Design coat stands 0- Coat racks -3 Hotel lobby luggage trolleys & coat racks Arosa 4-5 Ashtrays & Umbrella stands 6-7 Presentation & Displays Wall mounted Brochure & Literature holders 8-9 Floor standing Brochure & Literature displays 0- Floor standing Brochure & Literature shelving -3 Display stands 4-5 Display columns 6-7 Wall & Poster display holders 8-9 Showcases, Infoboards & Pavement poster 30-3 Magazine & Brochure cabinets 3-33 Screens & Partitions Whiteboard & Presentation screens Metropol Partition & acoustic screens Metropol Counters & Reception desks Exhibition counters 38 Compact counters Genua & Meran 39 Shelving Design shelving Topline 40-4 M 4-43 Office shelving Progress 500 / Progress Library shelving Univers Libra 50-5 Storage shelving Stora Status

4 Stainless steel coat stands & Racks Wall mounted coat hooks Arte Stainless steel base tube 40 mm Ø. with 3 coat hooks. L 450 x D 60 x H 0 mm # , with 4 hat hooks, 9 coat hooks. L 50 x D 60 x H 80 mm # , Coat hanger Arte, stainless steel, Ø mm # ,90 / each Coat rack Arte Mobile, double sided coat rack with 8 hat hooks and 8 coat hooks, made of stainless steel. L 70 x D 460 x H 795 mm. Umbrella holder Arte Stainless steel with drip tray, can be mounted either left or right. Coat stand Arte Stainless steel, 4 slideable bars, room for 8 coat hangers. Heavy stable base. Ø 40 mm, H 800 mm. Umbrella holder Arte Stainless steel with drip tray. # , # , # , # , 4

5 Stainless steel coat stands & Racks Stainless steel and glass in a timeless elegant design. Frame and coat hanger stand, made of high quality stainless steel with matt surface finish. All shelves are made of clear safety glass, with a maximal loading of 50 kg. The umbrella stand and drip tray can be mounted either on the left or right hand side. Dimensions: H 900 x D 400 mm Coat hanger Aluminium Ø 9 mm, powder coated in black. # 600 8,90 Coat hanger Stainless steel, Ø mm # ,50 Coat-rack unit with coat-hanger rack + shelves W 800 mm Literature display unit shelves 3 sloped shelves W 800 mm Shelf unit 5 shelves W 800 mm Final end upright Ø 45 mm Umbrella holder with drip tray H 450 x Ø 5 mm # , # , # , # # ,- 5

6 Stainless steel coat stands G E Solid and professional coat-stand, made of high-quality stainless steel. 6 coat-hangers are included. Dimensions: Base 50 x 460 mm, H 680 mm # ,- Umbrella unit # , Easy coat stand A classic, modern stainless steel coat stand. 3 slideable bars for coat hangers. And integrated umbrella holder, the extremely stable granite base has a plastic cover with a recess which forms the drip tray. Dimensions: Ø 365 x H 750 mm # 64 99, Coat hanger arte Stainless steel, Ø mm # ,50/each Aristo coat stand Modern elegant design, with 4 stainless steel columns, and a circular crown with hooks. The large stainless steel base provides extreme stability. Dimensions: H 700 x Ø 400 mm # , 6

7 Stainless steel coat stands 50 cm 50 cm front, wooden frame Bar, coat hangers and hooks in stainless steel Cambridge coat stand Two stainless steel columns, with coat hanger bar and a circular crown with 8 hooks. A satin finish glass plate for storage is above the circular crown. Dimensions: Ø 400 mm x H 750 mm # , Cambridge umbrella unit Holder with drip tray can be mounted on either column. # , NEW Lugano Glass Classic attractive wall coat rack with glass front panel mounted on a rear panel in wood. All metal parts in stainless steel, includes 4 coat hangers and 4 hooks. Dimensions: W 50 H 50 cm # , 7

8 Coat stands Chrome Rotating element Chrome 0 Stilo 59, Rondo 99, Ohio 9, 3 Roma 9, Also available in black and alusilver/black 8 Rondo The top element is rotatable, the heavy concrete filled base gives this coat stand extreme stability, integrated umbrella holder and drip tray. Dimensions: H 760 mm x Ø 50 mm Rondo black (not pictured) # ,- Rondo aluminium silver/black (not pictured) # ,- Rondo chrome/black (pictured) # ,- Ohio An attractive modern coat stand, top element is rotatable, powder coated steel, in aluminium silver, concrete filled base gives extra stability. Dimensions: H 760 mm x Ø 390 mm Ohio # 605 9,- Coat hangers (set of 5), in aluminium silver # 69 33,- 3 Roma Chrome coated coat stand, stable heavy concrete filled base. Dimensions: Ø 500 x H 700 mm Roma # 69 9,- Coat hangers (set of 5), chrome # ,90 4 Stilo Rotatable top element, heavy and stable base. 5 inner coat hooks and 5 outer coat hooks. Includes umbrella holder and drip tray. Colour: aluminium matt Dimensions: H 760 mm x Ø 500 mm Stilo # ,- Coat-hanger, (set of 5), aluminium silver # 69 33, Coat hangers aluminium silver # 69 set of 5 33,- chrome # 6006 set of 5 34,90

9 Coat stands 4 hat-/ 8 coat hooks 9 5 Public 9, 6 New Public 9, 7 Vegas B 09, 9 8 Prima 9, Rotating element Also ideal for small umbrellas NEW 5 Public 7 Vegas B With a rotatable top element and a heavy concrete filled base. 6 hat hooks and coat hooks. Umbrella holder, drip tray integrated in the base. Colour: aluminium silver. Dimensions: Ø 500 x H 750 mm Public 6 / # ,- Coat hangers (set of 5), in aluminium silver # 69 33,- Turnable coat stand with 6 hooks. Steady due to a heavy base and a stable pole. An umbrella unit is already included. This unit offers 4 extra hooks which are ideal for small umbrellas.colour: aluminum-silver Dimensions: Ø 36 H 74,5 cm Vegas B # ,- Coat hangers (set of 5), in aluminium silver # 69 33,- 9 Coat hangers 6 New Public A very stable coat stand made of high quality steel powder coated in aluminium silver. Hooks are in aluminium silver and black. The rotatable top has 4 hat and 8 coat hooks. Integrated umbrella holder, drip tray in the base. Dimensions: Ø 400 x H 770 mm 8 Prima Turnable top-unit, heavy base. With 5 hat hooks and 0 coat hooks Colour: black/aluminium matt Dimension: Ø 50 H 76 cm New Public 4 / 8 # 684 9,- Coat hangers (set of 5), in aluminium silver # 69 33,- Prima # 670 9,- Coat hangers (set of 5), in aluminium silver # 69 33,- 9 aluminium silver # 69 set of 5 33,- 9

10 Designer coat stands , , NEW Visually conceals the clothing 339, 3 69, 6 coat hangers included! Wall mounted coat rack tec-art Made of high quality steel, powder coated in aluminium silver finish. Clear safety glass shelf for hats etc. Includes 5 coat hangers and 6 hooks. Dimensions: W 600 x D 330 (without hangers) x H 700 mm Wall mounted coat rack tec-art # , 3 G Stability due to heavy metal base. 6 coat hangers included, umbrella holder optional. Color: aluminium silver Dimensions: W 5 x D 46 x H 68 cm G # ,- Coat stand tec-art A free standing coat stand. The powder coated steel front visually conceals the clothing. All other parts are chromed steel. The powder coated steel front is available in aluminium silver or anthracite. 5 chrome coat hangers are included. Dimensions: W 600 mm x D 400 mm x H 700mm Coat stand tec-art aluminium silver # , Coat stand tec-art anthracite # , 0 4 M 5 A double sided coat stand in steel, powder coated in alu/silver, 8 hooks on two vertical columns with integrated umbrella holder and drip tray (without pictured coat hangers No-69). M 5 # ,- Coat hangers, aluminium silver, set of 5 # 69 33,- 0 Coat hangers 0 aluminium silver # 69 Set of 5 pcs 33,-

11 Designer coat stands 0 Rotating element 0 Space saving, can be placed directly against the wall 5 89, , 9 359, 6 35, 8 59, NEW 3 G8 Double column steel construction, powder coated in aluminium silver, with utility shelf in tempered glass, and 4 coat hooks, two on each column. This coat stand has a very stable base. Dimensions: Base 670 x 370 mm, H 800 mm G8 # 6 89, Coat hangers, set of 5, alu-silver # 69 33, 6 Solitaire Coat stand in modern design with 3 vertical tubes providing 8 hooks. Integrated umbrella unit with drip catcher. Dimensions: Ø 33,5 H 75 cm Solitaire # ,- Coat hangers, set of 5, alu-silver # 69 33, 6 Mali An attractive coat stand with 8 coat hooks, includes an umbrella holder and drip tray. This coat stand is made of high quality steel, powder coated in aluminium silver. The top element is rotatable. Dimensions: Ø 450 mm x H 70 mm Mali # , Coat hangers, set of 5, alu-silver # 69 33, 7 Arc Junior An extremely attractive coat stand with curved vertical box section. A round crown with 8 hooks, 4 additional hooks on the vertical section and integrated umbrella holder. Extremely stable due to the heavy granit base. Coat stand made of steel which is powder coated. Colour: aluminium silver/black. Dimensions: Ø 380 mm x H 750 mm Arc # , Coat hangers, set of 5, alu-silver # 69 33, 8 Kent A multifunctional compact high capacity wall mounted coat stand. Made of high quality steel powder coated in aluminium silver. Includes 4 coat hangers, 4 strong magnetic hooks and glass shelves made of satin finish safety glass. An optional umbrella holder with drip tray is available. Dimensions: W 800 x D 360 (without hangers) x H 800 mm Kent # , Umbrella holder with drip tray # , 0 Coat hangers 0 aluminum silver # 69 set of 5 pcs 33,

12 Coat racks Wall coat rack Sevilla A large capacity coat rack, made of steel powder coated in aluminium silver. 8 hooks on the lower crossbar, the upper cross section can be equipped with either coat hangers or hooks. Optional extras are an umbrella holder with drip tray and castors. Dimension: W 000 x D 430 x H 700 mm Coat rack Sevilla # ,- 3 Sevilla Zubehör Coat hangers ( pcs) # 6558,50 3 Hooks (5 pcs) # ,90 4 Castors (Set of 4, lockable) # 677,- 5 Umbrella holder with drip tray # ,- 5 5 Sevilla 6 Aluminium 7 from 399, 7 6 Mobile coat rack Multiline Made of aluminium, has a large clothing capacity. Is available in three lengths. An optional extra is the umbrella holder with drip tray, which can be mounted on either of the end uprights. An ideal coat rack for large events. with 0 hat hooks and 36 coat hooks W 000 x D 400 x H 700 mm # ,- with 4 hat hooks and 5 coat hooks (as pictured) W 400 x D 400 x H 700 mm # ,- with 8 hat hooks and 68 coat hooks W 800 x D 400 x H 700 mm # ,- 7 Umbrella holder Multiline Umbrella holder with drip tray # ,-

13 Coat racks Options with a combination of hangers and hooks with hooks 6 with a combination of hangers and hooks Wall mounted coat rack Free-standing coat rack coat stand Wall mounted coat rack Wall mounted coat rack Montana Includes shelf for hats etc, for either 6 coat hangers or hooks (Pic. 5+6) L 000 x D 370 x H 5 mm Montana wall mounted coat rack # ,- Coat stand Montana Elegant and modern, very stable concrete base. Recommended for either 6 coat hangers or 6 hooks (Pic. 5+6) Umbrella holder and drip tray is an optional extra (Pic. 7). L 550 x D 370 x H 700 mm Coat-stand Montana silver/black # ,- 3 Coat rack Montana Extremely stable. Umbrella holder and drip tray can be mounted on either side (Pic.7) recommended for either 0 coat hangers, 0 hooks or a combination of both (Pic 5+6). L 000 x D 460 x H 700 mm Single-sided wardrobe silver/black # ,- 4 Wall mounted coat rack Montana Upper shelf. Umbrella holder and drip tray can be mounted on either side (Pic. 7) recommended for either 0 coat hangers, 0 hooks or a combination of both (Pic. 5+6). L 000 x D 430 x H 700 mm Single sided coat rack Montana silver/black # ,- Montana accessories 5 Coat hangers (set of ) # 6558,50 6 Double hooks for Montana (set of 5) # ,90 7 Umbrella holder & drip tray # ,- 8 Castors for Montana (Set of 4, lockable) # 677,- 3

14 Hotel lobby luggage trolleys Professional lobby luggage trolley for reception areas, hotels, wardrobe rooms and tourist facilities 3 Steering grip Accessories: Coat hangers, plastic black Coat hangers (set of 5) # ,50 3 Hooks, plastic black Hooks (set of 5) # 678, Lobby luggage trolley Jupiter A professional mobile trolley, extremely stable chromed steel construction. An upper storage shelf, coat hanger bar and lower luggage shelf with non-slip rubber. Heavy duty castors with wall deflectors ( of them are lockable) L 000 x D 500 x H 700 mm Lobby luggage trolley Jupiter # ,- 4 Lobby luggage trolley Chromo A light chromed steel trolley/coat rack. Due to the extra length of 50 mm it has a larger carrying capacity. L 50 x D 450 x H 790 mm Lobby luggage trolley Chromo # ,- Accessories: Coat hangers, plastic black 4 Coat hangers (set of 5) # ,50 4

15 Coat racks from 45, Attractive modern wall mounted coat hanger, strong double hooks in Technopolymer. Can be mounted as a single element or extended joining more elements together, utilizing optimal room space. Heigh & depth of each element: 9 8 cm. 3 hat and 6 coat hooks, 43 cm long 6 hat and coat hooks, 95 cm long 3 hat / 6 coat hooks W 430 x D 80 x H 90 mm # ,- 6 hat / coat hooks W 950 x D 80 x H 90 mm # ,-...extendable! double coat hooks on rear side 4 High quality double castors, lockable 3 49,- 3 Mobile coat rack Event An extra long coat rack, Ø 3 cm steel tubing makes this unit extremely stable. Powder coated in aluminium silver colour. Base has four lockable castors. Dimensions: W 78 D 53 H 7 cm Coat rack Event # ,- Accessories: Coat hangers, plastic black Coat hangers (set of 5) # ,50 5 Coat hangers, steel aluminium silver Coat hangers (set of 5) # 69 33, 5

16 Ashtrays Ashtrays Pio Elegant and stable stainless steel ashtray column in two versions: weatherproof self-extinguishing Integrated rubbish bin weatherproof 3 Ashtray stand Pio Ashtray stand with an elaborate top, for stubbing out cigarettes at a comfortable height. Triangular key is supplied for simple and easy emptying of ash. Stable base that can be anchored to the floor (mounting items included). Dimensions: ø 75 x height 00 mm, volume,7 liter. Ashtray stand Pio # ,- Wall mounted ashtray Pio Ashtray complete with material for wall mounting. Dimensions: ø 75 x height 450 mm, volume,7 liter. Wall mounted ashtray Pio # ,- 3 Combination ashtray Duo A modern designed ashtray. Easy emptying of the ash and rubbish compartment. Stable base that can be anchored to the floor (mounting items included). Ashtray volume: 0,75 liters, rubbish holder: 6,5 liter. Dimensions: H 80 x Ø 90 mm Combination ashtray Duo # ,- 6

17 Ashtrays / Umbrella stands weatherproof self-extinguishing Safety ashtray stand tec-art E Made of stainless steel, ideal for outdoor areas. Stable base that can be anchored to the floor.removeable 5 liter rubbish bin. Weatherproof hood as optional extra. Dimensions without the weather-guard: H 640 x Ø 30 mm Dimensions wheather-guard: H 90 x Ø 30 mm Safety ashtray # 69 9,- Weather-guard # 69 39,90 5 Umbrella stand tec-art 5 Made of stainless steel. Dimensions: H 550 x Ø 300 mm 6 Umbrella stand # ,- Umbrella stand Tim 6 Made of stainless steel. Also ideally suited for pocket umbrellas. Dimensions: H 490 x Ø 300 mm Umbrella stand # 664,- also ideal for pocket umbrellas 7

18 Brochure holders Magazine holder wall mounted Powder coated wire construction providing compartments. Filling depth for each compartment is 30 mm. Colour: light grey. W 60 x H 400 mm. (compartment inner dimension W 50 mm) # 650 E 99,- NovaX wall mounted 5 transparent A4 compartments. Filling depth of each is 0 mm. Frame colour: aluminium/silver W 30 x D 70 x H 900 mm. (compartment inner dimension W mm) # 6398 E 89,- 60 First wall mounted Presentation of brochures/literature in DIN A4, DIN A5 and DL format. Powder coated steel frame in anthracite. Holders in silver. The brochures are held in position by acrylic sheets. 00 W 60 x D 65 x H 00 mm (compartment inner dimension W 30 mm) # 6594 E 35,- 75 Filio II wall mounted A modern attractive brochure/literature holder with 5 compartments for DIN A4, DIN A5 or DL format, filling depth of each compartment is 3 mm. Included is a foil with Info lettering which can be stuck on the header rail. Mounting items are included. 900 W 75 x D 0 x H 900 mm (compartment inner # 6980 E 04,- 8

19 Brochure holders Varia counter display An attractive counter display for DIN A4, DIN A5 and DL brochures and literature. Very stable steel construction. Powder coated in aluminium silver colour. Compartment filling depth: 8 mm. Varia with 3 compartments W 30 x D 40 x H 30 mm # 65 E 45,- Varia with 5 compartments W 30 x D 40 x H 390 # 6506 E 57,- Logo/Inscription space Varia brochure holder wall mounted A variable display for DIN A4, DIN A5 and DL formats. Brochure/literature are held by clear acrylic sheets, metal powder coated frame. Space for Logo/inscription foil at the bottom of the frame. Compartment filling height: 0 mm Dimension: W 30 x D 00 x H 00 mm # 6507 E,- artline wall mounted brochure holder This attractive brochure holder is available in two models. Either 4 x DL or 3 x DIN A4 holders. The metal support is powder coated silver in colour and is fixed to the wall using stainless steel mounts. Compartment filling depth: 33 mm. Logo/Inscription space 4 x DL holders W 80 x D 65 x H 00 mm # 696 E 49,- 3 x DIN A4 holders W 90 x D 65 x H 00 mm # 695 E 67,- 8 small and 9 large holders are delivered together with the rear panel. You have unlimited variation possibilities, for example: Focus multi variable wall mounted x /3 A4 3 x A4 9 x DIN A4 8 x /3 A4 A powder coated large panel in aluminium silver colour, with punches holes, for the attachment of chrome plated brochure/literature holders DIN A4 or DL format. Filling depth = 33 mm. Dimensions: W 750 x H 000 mm. # 60 E 99,- 6 x /3 A4 6 x A 0 x /3 A4 4 x A4 6 x /3 A4 6 x A4 Focus mounting possibilities 9

20 Brochure/Display stands...foldable! c A4 NEWS foil Optional: Practical transportation bag 3 a b 0 Tec-Art, folding display stand With 4 acrylic holders. Folding mechanism allows easy and quick assembly and packing, complete with brochures. Powder coated in aluminium silver colour. A black nylon transportation bag is also available. Fillig depth 43 mm, net weight 6 kg. Dimensions (standing): W 60 x D 300 x H 500mm, (folded H 450 mm) Tec-Art Folder # , Carrying bag # 699 7,- A4 and /3 A4 pockets available. To create /3 A4 make use of a divider. (b). Tec-Art, display stand rotatable This display stand consists of two elements: a) The powder coated stand and base element b) Acrylic holdes for the brochure/literature (these must be ordered separately) The metal, powder coated display, has space for acrylic holders, (6 on each side). Holders are for DIN A4 or using a divider (optional extra) DL format. An optional information foil printed with NEWS is also available for the top of the display. Dimensions: W 300 x D 400 x H Tec-Art, rotating display stand Dimension: Base ø 540 x H 70 mm Colour: aluminium silver tec-art display stand # , 3 tec-art rotating display stand # , a Acrylic pocket A4, filling depth = 60 mm # , b Divider for DL format # 694 8,40 c Shelf adhesive NEWS foil # ,50

21 Brochure/Display stands Vito A metal powder coated in aluminium/silver colour, display stand for 8 x DIN A4 format, with a filling depth of 0 mm. Can be used either free-standing or mounted on the wall (has a foldable base). Wall mounting set is included. Dimensions: W 30 x D 40 x H 500 mm Display stand Vito (free-standing or wall-mounted) # , 5 Varia 7 x DIN A4 A metal powder coated convex construction display stand in aluminium/silver colour. Allows for 7 DIN A4 brochures/literature or 4 DL brochures/literature, or a combination of both. Generous space below on the front for displaying any logo or advertising. Filling depth: 6 mm. Dimensions: W 30 x D 340 x H 30 mm Display stand Varia # , Display stand First A display presentation stand with 4 or 8 compartments for DIN A4. DIN A5 and DL formats. Steel powder coated in anthracite, holder frame base in silver. The brochures/literature are held in place by acrylic sheets. A printed foil with INFO is included. Compartment filling depth 40 mm. Dimensions: W 300 x D 300 x H 750 mm (4 x DIN A4) / W 540 x D 300 x H 750 mm (8 x DIN A4) Display stand First, 4 x DIN A4 # , Display stand First, 8 x DIN A4 # ,

22 Brochure/literature displays Brochure centre A NEW Optional castors Denver NEW Denver Steel construction with 4 stable acrylic shelves for x DIN A4, filling depth 50 mm. Info foil is included. Optional castors available. Colour: alu/silver Denver W 90 x D 80 x H 570 mm # , Brochure centre A Multifunctional presentation and information centre with 4 acrylic shelves with a 40mm bottom edge for 8 x DIN A4 brochures, also 6 x wire holders for /3 DIN A4 (Flyers) and an A4 pocket holder for a logo. Info foil is included, optional castors available Colour: alu/silver Bruchure centre A W 780 x D 450 x H 70 mm # , Castors (set of 4) # 675 9,90 3 Sirius A design orientated steel display stand, powder coated in aluminium silver colour. The shelves have perforated holes, with 40 mm bottom edge and an information plinth at the top for logo or advertising space. The display base is mounted on castors, making it very mobile. Models: 4 x DIN A4 or x DIN A4 4 x DIN A4 W 530 x D 340 x H 550 mm # , x DIN A4 W 780 x D 340 x H 700 mm # , Sirius

23 Brochure/literature displays 3 Artline Perforated angled steel shelves with an 90, 40 mm lower edge. A lockable storage cabinet is also available (D 380 x H 380 for files/catalogues etc.). The top support provides space for logo or advertising. 0 x DIN A4 W 930 x D 350 x H 700 mm # , 6 x DIN A4 with lockable cabinet # , Convienient, lockable cabinet 4 Ecoline 3 models are available, steel construction, powder coated in aluminium/silver colour. 4 x acrylic shelves with an 90, 40 mm lower edge. Mobile unit on lockable castors. 4 x DIN A4 W 30 x D 350 x H 600 mm # 63 9, x DIN A4 W 70 x D 350 x H 600 mm # , 6 x DIN A4 W 90 x D 350 x H 600 mm # , 3 Artline 4 Ecoline 3

24 Display stand narrow Display stand narrow These narrow display stands are ideal for presenting brochures and literature. The powder coated steel stand has perforated holes on the front surface for the attachment of chrome wire holders for DIN A4, DIN A5 or DL brochures/literature. Poster pockets with magnetic strips can also be easily attached. Colour: aluminium silver Display stand narrow W 60 x D 40 x H 650 mm # ,- Brochure holder DL format, filling depth = 33 mm (set of ) # 694 4,50 /set 3 Brochure holder A5 format, filling height = 33 mm (set of ) # 693 4,70 /set 4 Brochure holder A4 format, filling height = 33 mm (set of ) # ,80 /set 5 Poster pocket A4 format, W 0 x H 97 mm (set of ) # ,- /set 6 Halogen lighting set, x 0W, incl. Transformer and 4m cable # ,- 4 To change posters:. Open the pocket. Place the poster between the foil 3. Close the foil 4. Attach the pocket on the front of the stand with the magnetic strips Halogen lamp

25 Display stand wide Display stand wide These wide display stands correspond in construction to the narrow stands on the previous page and are ideal for presenting brochures and literature. The powder coated steel stand has perforated holes on the front surface for the attachment of chrome wire holders for DIN A4, DIN A5 and DL brochures/ literature. Poster pockets with magnetic strips can also be easily attached. To change posters:. Open the pocket. Place the poster between the foil 3. Close the foil 4. Attach the pocket on the front of the stand with the magnetic strips Halogen lamp Display stand wide W 50 x D 460 x H 650 mm # ,- Brochure holder DL format, filling depth 33 mm (set of) # 694 4,50 /set 3 Brochure holder DIN A5, filling height 33 mm (set of ) # 693 4,70 /set 4 Brochure holder DIN A4, filling height 33 mm (set of ) # ,80 /set 5 Poster pocket DIN A4, W 0 x H 97 mm (set of ) # ,- /set (not illustrated) Poster pocket A3 W 97 x H 40 mm # ,- 6 Poster pocket A W 40 x H 594 mm # ,- 7 Halogen lighting set, x 0W, incl. Transformer and 4m cable # ,- 5

26 Display columns 7 Display column narrow, W 400 x D 50 x H 650 mm # 699 9,- Display column wide, W 600 x D 30 x H 650 mm # ,- 3 Brochure holder DL format, filling depth 33 mm (set of ) # 694 4,50 /set 4 Brochure holder DIN A5, filling depth 33 mm (set of ) # 693 4,70 /set 5 Brochure holder DIN A4, filling depth 33 mm (set of ) # ,80 /set 6 Poster pocket DIN A4 (set of ) # ,- /set Poster pocket DIN A3 (not illustrated) # ,- Poster pocket DIN A (not illustrated) # ,- 7 Halogen lighting set, x 0W, incl. Transformer and 4 m cable # ,- 6 doublesided doublesided tec-art display column These display columns come in two models, narrow and wide. They are double sided allowing the presentation of brochures and literature on both sides of each column. The powder coated steel stand has perforated holes on the front surface for the attachment of chrome wire holders for DIN A4, DIN A5 and DL brochures/literature. Poster pockets with magnetic strips can also be easily attached. Material: Steel, Colour: alu-silver To change posters:. Open the pocket. Place the poster between the foil 3. Close the foil 4. Attach the pocket on the front of the stand with the magnetic strips Halogen lamp

27 Display column large doublesided doublesided tec-art column Size Example of Combinations This large, extremely effective display column, is double sided and stands on a very stable oval base, allowing the presentation of brochures and literature on both sides of the column. The powder coated steel stand has perforated holes on the front surface for the attachment of chrome wire holders for DIN A4, DIN A5 and DL brochures/literature. Poster pockets with magnetic strips can also be easily attached. Material: Steel, Colour: alu-silver To change posters:. Open the pocket. Place the poster between the foil 3. Close the foil 4. Attach the pocket on the front of the stand with the magnetic strips Halogen lamp Display column Size, W 770 x D 330 x H 850 mm # ,- Poster pocket DIN A4 (not illustrated) # ,- /set Poster pocket A3 # ,- Poster pocket DIN A (not illustrated) # ,- 3 Poster pocket A # ,- 4 Brochure holder DL format, filling depth 33 mm (set of ) # 694 4,50 /set (not illustrated) Brochure holder DIN A5, filling depth 33 mm (set of ) # 693 4,70 /set 5 Brochure holder DIN A4, filling depth 33 mm (set of ) # ,80 /set 6 Halogen lighting set, x 0W, incl. Transformer and 4 m cable # ,- 7

28 Wall and door signs A6 info sign A4 info sign A3 directory sign, text printed on paper. Wall and door signs These signs consist of two acyrlic sheets. The sign is fixed to the wall by stainless steel supports and inserts. Once the sign is assembled, the contents of the sign can be simply changed by removing the inserts and placing the new information between the acrylic sheets. sign Pictographs CD-ROM presenting 45 pictographs for rapid and individual design of your signs. CD-ROM # ,- Door/Table sign DIN A6 (05 x48 mm) # 6950 (set of 3) Packung 56,- Sign DIN A4 DIN A4 (0 x 97mm) # ,- Sign DIN A3 DIN A3 (97 x 40 mm) # ,- Examples Changing the sign: A6 info sign Illustration as a table sign Simply remove the stainless steel inserts. Place the new sign betweeen the acrylic sheets and replace the inserts into the wall mounts. 8

29 Wall signs/displays DIN A DIN A3 DIN A4 DIN A Wall sign/display Look These signs/displays are constructed from two steel powder coated uprights, in aluminium/silver colour, and an acrylic poster pocket. Changing of posters is very quick and simple. Mounting material is included. The posters are easily changed. Poster holder Look DIN A4 W 66 x D 0 x H 354 mm # 6530 (set of 3) Packung 45,90 Poster holder Look DIN A3 W 377 x D 0 x H 500 mm # ,50 Poster holder Look DIN A W 53 x D 0 x H 700 mm # ,- Poster holder Look DIN A W 754 x D 0 x H 000 mm # 659 7,- 9

30 Showcase and Infoboard Infoboard Look The infoboard is made of steel with a matt glass front panel. incl. marker/pen tray Space for 8 x DIN A4 info sheets Glass surface can be used with markers etc. Dimensions board: H 700 X W 900 mm Dimensions board and frame: H 840 X W 060 mm Strong small round magnets with chrome surface finish for infoboard (Ø 5 mm) Infoboard Look Infoboard Look # 658 3,- Accessory Magnets 0 piece / pack # 659,90 Showcase Look for indoor use only Attractive design combination Sliding doors in ESG safety glass Lock, with set of keys magnetic Space for 8 x DIN A4 or 4 x DIN A3 posters Dimensions (internal area): H 74 X W 94 mm Dimensions (external): H 840 X W 060 mm Depth (internal): 0 mm Look 8 x DIN A4 # 65 9,- Accessory Magnets 0 piece / pack # 653 9,90 Showcase 8 x A4 30

31 Pavement poster sign Boston mobile 79,- Pavement poster sign Boston An extremely stable metal construction, display area for x DIN A posters. Convex advertising surface for good perception. Includes x UV protective weather proof foils with magnetic strips to secure the posters. Is foldable, and has two wheels for excellent mobility. Weight:,5 kg, colour: Aluminium/Silver. Dimensions: W 70 x D 700 x H 50 mm # 6898 E 79, 3

32 Brochure and literature cabinets Media Brochure and literature cabinets Media For the presentation of brochures, catalogues and magazines. For travel agents, libraries and archives. All storage compartments have a transparent acrylic front flap with a bottom edge to enable brochures/ catalogues/magazines to be presented. Each front flap can be raised and pushed back, the compartment behind the front flap (W 5 x H 330 mm) can be used to store catalogues/brochures, etc. Cabinet dimensions: W 970 x D 40 x H 00 mm. The corpus frame and plinth is made of E graded melamine coated wood, shelves are powder coated steel. The header board has a transparent rail enabling easy insertion of a white cardboard strip for any inscription that may be required. The high load capacity shelves are powder coated in RAL 7035 light grey. This item is delivered flat packed. Transparent acrylic sheet for presentation of literature. Cabinet: with 4 compartments, front flaps W 0 x H 30 mm, Compartment filling height: 300 mm # 3790 e 999, Cabinet: with 48 compartments, front flaps W 0 x H 55 mm, Compartment filling height: 300 mm # 379 e 695, 3

33 Brochure and literature cabinets Print Brochure and literature cabinet Print The corpus and frame with single compartments and plinth is made of E graded melamine coated wood. Each storage compartment has a transparent front flap with a bottom edge of 7 mm to enable brochures/catalogues/magazines to be presented. Each front flap can be raised and pushed back, enabling access to the literature in each compartment. The shelves are polyester coated, Brochure cabinet 5 x A4 with a high load capacity and are made of high quality steel. Two models have a sliding door cupboard which is lockable. light grey W 740 x D 40 x The complete cabinet is in RAL7035 light H 90 mm grey colour. Each compartment inner dimensions: W 5 x D 330 x H 330 mm. Compartment s inner dimensions: W 5 x D 330 x H 330 mm Universal Brochure shelving The shelving unit is 000 mm wide and 300 mm deep. Each shelf has 4 front flaps, each is 30 mm wide with an acrylic front sheet. Each flap can be raised and pushed back, enabling access to stored literature behind the front flap. The unit is constructed in steel, powder coated in light grey, each shelf has a load capacity of 80 kg, the complete unit has a load capacity of 400 kg. Brochure cabinet 0 x A4 light grey W 970 x D 40 x H 90 mm Brochure cabinet 6 x A4 with sliding-door cabinet, file height light grey W 970 x D 40 x H 90 mm Brochure cabinet x A4 with sliding-door cabinet, file height light grey W 970 x D 40 x H 90 mm # 3796 # 3795 # 3794 # 3793 e 599,- e 699,- e 749,- 79,- flap closed Movable shelf divider light grey, H 55 mm # 879 e 7, wide 000 high with 0 compartments Base element # 8840 e 640,- Extension element # 884 e 599,- flap raised 33

34 Presentation screens Metropol 3 Whiteboard for individual marking (is also magnetic) For moderation and presentation. Perforated steel element, for magnetic use, extremely versatile for displays.. Whiteboard steel element, magnetic, also for use with board markers. These elements can be placed linearly or angled (45, 90, 35 ) and extended to your desired combination. Either on a fixed base or mobile with the optional castors. At the end of the desired combination, your require a final support column. Dimensions: W 800 x H 750 mm / width of each screen = quoted width + 55 mm (width of final support column). Description Dimensions in cm (WxH) Colour Part-no. e / piece Perforated steel element 80 x 75 Alu-silver , Whiteboard element 80 x 75 white , 3 Final support column 75 Alu-silver 699 LIEFERZEIT 99, 4 Set of 4 castors (lockable) Alu-silver 695 WOCHE 3, Perforated steel element W 80 x H 75 cm Part-No: , Whiteboard element W 80 x H 75 cm Part-No: , 3 4 final column support (for the last screen) H 75 cm Part-No: , Castors x 4 lockable Part-No: 695 3,- Alu-silver white Alu-silver Alu-silver 34

35 Presentation screens Metropol F G B G Perforated screen as a display A C A 3 E Practical poster pockets Individual mobile screens with castors Accessories for perforated screen elements Part-no. e / unit A Brochure holder DIN A4 fill depth 33 mm (set of ) ,80 B Brochure holder DIN long fill depth 33 mm (set of ) 694 4,50 C Angled shelf for catalogues/literature W 750 x D 30 mm , D Angled shelf with sides (not pictured) W 750 x D 300 mm Max per element, capacity 5 kg , E Flipchart set for standard flipchart ,90 Poster pockets for perforated and whiteboard screens Clear plastic, magnetically secured, easy poster changing F Poster pocket DIN A W 40 x H 594 mm , G Poster pocket DIN A W 594 x H 80 mm , 35

36 Privacy screens Metropol 4 from 99, NEW Sound absorbing Acoustic screen 36

37 Partition screens Metropol Partition screens. The wooden screens as elegant sound absorbing partitions and room dividers.. Translucent element, has a frosted surface Acoustic sound absorbing element, conforms to standards DIN ISO 354 and ISO 654. These elements can be placed linearly or angled (45, 90, 35 ) and extended to your desired combination. At the end of the desired combination, you require a final support column. Dimensions: W 80 x H 75 cm Width of each screen = quoted width + 55 mm (width of final support column). 4 Privacy screen Room divider Frosted surface Acoustic screen Translucent element Description Dimensions in cm Colour Item no. e / unit Wooden element W 80 H 75 white green , 99, Translucent element W 80 H 75 translucent , 3 Acoustic element W 80 H 75 white , 4 Final support column H 75 alu-silver , 5 Set of 4 castors (lockable) alu-silver 695 3, Wooden element W 80 x H 75 cm Nr , white # , green 3 4 Translucent element W 80 x H 75 cm # , translucent Acoustic element W 80 x H 75 cm # , NEW white Final support column (for the last screen) H 75 cm # , alu-silver 5 Castors (set of 4) lockable # 695 3,- alu-silver 37

38 Counter Turin Turin 99, Rear view. Counter Turin This mobile counter Turin is ideal for exhibitions and events. Is collapsible/foldable and can be transported using the carry bag (optional extra). The assembly of this counter is easily achieved by one person in a few minutes. The front of the counter is perforated, enabling the attachment of holders (not included) for brochures and literature. Larger posters can be attached using poster pockets with magnetic strips. The counter is extendable simply by placing several counters together (see pic.). Lockable doors are also available as an optional extra. Counter Turin W 900 x D 380 x H 000 mm # ,-. Carry bag for the counter # ,-. Lockable doors # ,-.3 Carry bag for doors # ,- Accessories a oster pocket DIN A W 594 x H 840 mm # ,- b Brochure holder DL (set of ) # 694 4,50 c Brochure holder A4 (set of ) # ,80 Messetheke: Transport und Aufbau Rear view with swing door. +.3 Counter Expo, tec-art Expo 469, tec-art 89, d Castors available 3 a a a Rear view of the counter (W 45 x D 90 x H 460 mm) Counter Expo A large counter with good storage space in the rear. The metal front of the counter is perforated, enabling the attachment of holders for brochures and literature DIN A4, /3 DIN A4 and larger posters can be attached using the poster pocket DIN A with magnetic strips. 5 x castors which are lockable are an optional extra. Material: Steel, powder coated in alu/silver, wood in beech veneer. Counter Expo W 40 D 480 H 00 mm # ,- Accessories a DIN A Poster pocket W 594 H 840 mm # ,- b Brochure holder /3 DIN A4 fill depth 33 mm ( pcs) # 694 4,50 c Brochure holder DIN A4 fill depth 33 mm ( pcs) # ,80 d Castors (Set of 5) # , 38 Counter tec-art A space saving and very stable oval counter in steel with beech veneer top. The metal corpus of the counter is powder coated in alu-silver. The front and back are perforated, enabling the attachment of holders on both sides for brochures and literature DIN A4, /3 DIN A4 and larger posters can be attached using the poster pocket DIN A with magnetic strips. 3 Counter tec-art W 900 D 430 H 00 mm # ,- Accessories a DIN A Poster pocket W 594 H 840 mm # ,- b Brochure holder /3 DIN A4 fill depth 33 mm ( pcs) # 694 4,50 c Brochure holder DIN A4 fill depth 33 mm ( pcs) # ,80

39 Counter Florenz, Meran Florenz 399, 4 Rear view Counter front with brochure holders Florenz An attractive and compact counter/reception desk, in white and alu-silver with desk top in wenge. The metal front of this unit has is perforated, enabling the attachment of holders for the presentation of literature and brochures in DIN A4 and /3 DIN A4. Larger posters can be attached using the poster pockets with magnetic strips. The front of this unit has a protective foot bar at the base. Single units can be placed together to form a larger counter/reception desk area. 8 cm 4 Counter Florenz W 80 D 500 H 50 mm # ,- Accessories Poster Pocket (not pictured) W 97 H 40 mm # ,- b Prospektfach DIN-lang fill depth 33 mm ( pcs) # 694 4,50 c Prospektfach DIN A4 fill depth 33 mm ( pcs) # ,80 5 Rear view of counter Meran NEW Compact counter in alu-silver/white. Behind the counter is an adequate work are with a depth of 70 cm, with cable outlet. Counter radius is. The counter can be extended simply by placing several counters side by side. 5 Counter Meran W 30 D 70 H 5 cm # ,- Meran 379, 8 cm 39

40 Design shelving Topline Illustration of smooth shelves Topline wall shelving This sturdy wall shelving made of steel is extremely stable. The shelves are either perforated or have a smooth steel finish. The depth of the shelving is 300 mm with a loading capacity of 50 kg. For the presentation of brochures/literatures there are sloped shelves available with a 40 mm bottom edge. The shelving is powder-coated in aluminium silver Ø 40 Ø Illustration with perforated shelves Wall shelving with or 4 shelves Wall shelf W 800 shelves Wall shelf W shelves Wall shelf W 800 shelf flat 3 shelves sloped Final vertical support column for shelves Final vertical support column for 4 shelves Smooth Shelves # 873 E 83,- # 875 E 56,- # 876 E 87,- # 773 E 54,- # 77 E 98,- gelochter Perforated Boden Shelf glatter Smooth Boden Shelf Perforated Shelves # 793 E 83,- # 795 E 56,- # 796 E 87,- # 773 E 54,- # 77 E 98,- 40

41 Design shelving Topline gelochter Fachboden glatter Fachboden Illustration of perforated shelves Topline floor standing shelving This free-standing shelving unit is made of steel and is extremely stable. The shelves are either perforated or have a smooth steel finish. The depth of the shelving is 300 mm with a loading capacity of 50 kg. For the presentation of brochures/literatures there are sloped shelves available with a 40 mm bottom edge. An optional cabinet is also available Ø Topline with 5 shelves Shelving W shelves # 870 E 87,- # 780 E 87,- Shelving W shelves Nr. 87 E 8,- Nr. 78 E 8,- Shelving W 800 shelves (flat) 3 sloped shelves # 87 e 60,- # 78 E 60,- Final vertical support column for 5 shelves # 770 E 03,- # 770 E 03,- Smooth Shelves Punched Shelves Illustration of smooth shelves Cabinet Cabinet for Topline shelving, fits between shelves file high, 800 mm wide # 879 E 93,- 4

42 Design shelving M W=000 W=750 Corner unit Extremely stable with a high load capacity. This modern designed racking system M, is extremely stable with a high load capacity. By utilizing the corner racks and the combination of widths from 000 and 750 mm allows optimal usage of all available space. The shelving is light grey in colour (RAL 7035) and is available in three depths of 400, 500 and 600 mm. Each shelf has a 40 mm edge, and the shelves can be adjusted in height in 86 mm steps by simply slotting into the next side column slit. The side columns (horizontal elements) are constructed of round metal tubing (ø 40 mm) with welded side panels, which are powder coated in aluminium silver, (similar to RAL 9006) colour. Three heigths are available: 800, 00 and 600 mm depth Tiefe depth Tiefe Tiefe depth mm with 4 shelves 00 mm with 5 shelves 600 mm with 6 shelves Shelf unit W 000 Shelf unit W 750 Corner unit 400+ depth Final support column Shelf unit W 000 Shelf unit W 750 Corner unit 400+ depth Final vertical support column Shelf unit W 000 Shelf unit W 750 Corner unit 400+ depth D= E 99,- E 86,- E 97,- E,- E 39,- E 3,- E 343,- E 35,- E 76,- E 68,- E 45,- D= E 9,- E,- E 335,- E 36,- E 7,- E 565,- E 408,- E 5,- E 33,- E 39,- E 48,- D= E 60, E 56,- 58 E 388,- 588 E 45,- 583 E 307, E 30, E 459, E 6, E 365, E 357, E 54,- Final vertical support column 588 E 65, E 86, E 96,-

43 Design shelving M e.g. Shelf unit 800 mm high, 400 mm depth from 86,- does not include the final vertical support. Load capacity per shelf 0kg With shelf supports max 00 kg Load capacity per complete shelf unit 000kg Width per shelf unit = Quoted width + 40mm (final column support) Safety advice: Shelving with a height/depth ratio of > 5: must be secured to the floor or wall Additional shelves D= E 0,30 D= E 4,90 D= E 9,50. W 000 W 750 Corner 5905 E 9, E 4, E 8, E 34,30 59 E 45,50 59 E 49,70 increases load capacity by 40 kg/support supports/shelf max. shelf supports D= E 5,0 D= E 5,50 D= E 6,0 300 movable shelf divider D= E 5,0 D= E 7,80 D= E 9,90 43

44 Office shelving Progress 500 PROGRESS 500 Office shelving Made of high quality steel An extremely stable slot-in system assembly Additional door assemblies in light grey or graphite All shelving is designed for file height Complete with floor plinths width variants for optimal room usage Square steel profile vertical columns with smooth front edging Shelves have a 30 mm edge and are adjustable in steps of 59 mm Powder coated in light grey RAL 7035 colour Width per rack = quoted width + 30 mm Depth per rack = quoted depth + 40 mm Complete shelves Carrying capacity per shelf: 300/400 deep 60 kg, 600 deep 80 kg Load capacity per unit: 500 kg Shelves without rear wall Shelves with rear wall H 900 mm with 6 shelves = 5 levels H 50 mm with 7 shelves = 6 levels H 600 mm with 8 shelves = 7 levels H 900 mm with 6 shelves = 5 levels H 50 mm with 7 shelves = 6 levels H 600 mm with 8 shelves = 7 levels Width mm Depth mm Base shelf Extension Base shelf Extension Base shelf Extension Base shelf Extension Base shelf Extension Base shelf Extension , 56, 55, 9, 99, 4, 9, 55, 36, 30, 437, 358, , 9, 9, 30, 349, 64, 336, 9, 396, 34, 487, 409, , 56, 36, 306, 443, 357, 400, 346, 479, 409, 56, 488, , 47, 43, 86, 94, 4, 86, 5, 353, 96, 40, 35, , 87, 87, 6, 344, 60, 33, 83, 389, 335, 478, 398, , 45, 357, 30, 437, 350, 395, 34, 467, 399, 56, 478, Shelving units for double-sided use Accessories: Side support Depth mm , , ,0 Fixed divider for 600 mm deep shelves Depth mm Width 960 mm Width 750 mm ,90 6,70 3 Divider movable Depth mm Preis , , ,

45 Office shelving Progress 500 Shelving frame without shelves for individual configuration. Shelving frame with rear wall, without shelves, for individual configuration Accessories: Shelves for individual configuration or as additional items Hanging-file support H 900 mm with top and bottom shelf H 50 mm with top and bottom shelf H 600 mm with top and bottom shelf Width mm Depth mm Base rack Add-on Base rack Add-on Base rack Add-on , 88, 89, 8, 336, 73, , 08, 308, 40, 370, 9, , 39, 34, 73, 43, 3, , 93, 84, 4, 33, 64, , 06, 300, 37, 36, 83, , 33, 339, 64, 404, 3, Examples of configurations, for shelving frames with a height 50 mm Depth mm Width in mm ,60 4, ,70 9, , 6,70 Wardrobe rail with hat/storage shelf, width 750mm Depth mm , ,30 Pair of doors H 900 mm Depth mm Width 960 mm Width 750 mm ,80 4,50 Vertical side facia for shelf unit end Depth Width mm mm , 45, 5, , 50, 6, , 7, 80, Vertical inside facia panel for units with doors Shelving frame unit 5 shelves Vertical side facia Shelving frame unit 6 hanging file supports Shelving frame unit 5 shelves set of doors inside facia panels Shelving frame unit shelf vertical side facia wardrobe rail set of doors Doors Color Width mm Vertical inside facia panel for units with doors Depth mm Preis 6 Light-grey , anthracite , 6 34, 4, , 45

46 Office shelving Progress 000 PROGRESS 000 Extremely stable steel office shelving An extremely stable slot-in easy assembly system Optimal use of space by utilizing the corner shelving and two available widths of 750 and 000mm Shelves are adjustable in steps of 59 mm High quality powder coated in either black (RAL 90) silver (RAL 9006) and light grey RAL 7035) Load capacity per shelf. for depth: 00 kg for depth: 0 kg with shelf supports: 00 kg Load capacity per shelving unit: 000 kg Width per shelving unit = width + 30 mm (vertical support column width) Shelving unit external dimensions: Depth = shelf depth + 40 mm Width = unit width + 30 mm Depth (corner unit) = 370 mm + 30 mm The width of a corner unit is 505 mm vertical side facia Shelving without rear wall 000 width 750 width corner shelf Shelving with rear wall from 48, Shelf unit with rear wall Shelves without rear wall Tiefe Tiefe Tiefe H 900 mm with 5 shelves H 50 mm with 6 shelves H 600 mm with 7 shelves W , per metre 5,- Framecolor Increases load capacity by 40 kg/support Shelf unit W 000 Shelf unit W 750 Corner shelf depth Final vertical support 300 tief black tief silver ,- 56,- 53,- 49,- 400 tief black tief silver ,- 87,- 66,- 5,- 500 tief black tief silver ,-,- 336,- 6,- 600 tief black tief silver , ,- 6,- Shelf unit W 000 Shelf unit W 750 Additional shelves Corner shelf depth Final vertical support ,- 9,- 304,- 67, ,- 9,- 33,- 74, ,- 6,- 404,- 8, ,- 95,- 448,- 87,- Shelf unit W 000 Shelf unit W 750 Corner shelf depth available for 600 mm deep shelves Final vertical support ,-,- 336,- 77, ,- 63,- 379,- 8, ,- 95,- 464,- 85, ,- 39,- 53,- 89,- 300 max. Stück pro Boden Depth Shelf support Movable divider Side support , , , , , , , , , , ,0 46 Depth W 000 W 750 Corner shelves , , , , , , , , , , , ,70 Shelf divider W ,30 Inscription rail transparent plastic, selfadhesive with white cardboard

47 Office shelving Progress 000 max. 00 kg vertical side facia Regalfeld ab 45,- from56,- corner shelf Eckregal Shelves with rear wall (see Fig. on previous side of catalogue without rear wall) Tiefe Tiefe Tiefe H 900 with rear wall and 5 shelves H 50 with rear wall and 6 shelves H 600 with rear wall and 7 shelves Depth Vertical Side Panel H 900 mm H 50 mm H 600 mm , , , , ,- 84 6, , , , , , ,- Framecolor Shelf unit W 000 Shelf unit W 750 Corner shelf depth Final vertical support 300 depth black depth silver ,- 48,- 365,- 49,- 400 depth black depth silver ,- 83,- 389,- 5,- 500 depth black depth silver ,- 99,- 459,- 6,- 600 depth black depth silver ,- 33, ,- Shelf unit W 000 Shelf unit W 750 Corner shelf depth Final vertical support ,- 99,- 437,- 67, ,- 34,- 464,- 74, ,- 368,- 550,- 8, ,- 409,- 6,- 87,- Shelf unit W 000 Shelf unit W 750 Corner shelf depth Final vertical support ,- 347,- 505,- 77, ,- 389,- 534,- 8, ,- 47,- 63,- 85, ,- 466,- 658,- 89,- Accessories: Corner shelf 47

48 Cantilever shelving Univers Continuous cantilever shelving Slot-in assembly. Complete shelves Complete shelves one-sided Complete shelves double-sided These cantilever shelving units are quick and easy to erect due to the simple slot-in assembly system. The individual shelves can be easily changed and varied.the height of shelves is variable in 6 mm steps. Files of varying depths and construction can be easily stored. The combination of the varying widths available of 000 and 750 mm allows optimal usage of room space. All components are of high quality steel with a polyester coating except for the cabinets which are E-wood and have melamine coated surfaces. Shelving colour: light grey RAL 7035 H 000 mm with 5 shelves H 50 mm with 6 shelves H 000 mm with x 5 shelves H 50 mm with x 6 shelves Width Depth Shelving unit Extension shelving Shelving unit Extension shelving Shelving unit Extension shelving Shelving unit Extension shelving , , , , , , , , , , , , , , , , , 883 3, , , , , , , , , , , , , , , , , , , , , , , , 889 6, , , , , , , , , , , , , , , , , , , , , , , with 60-mm edge Shelf with side supports Shelf with support bracket Bottom shelf with side supports Bottom shelf with front facia Sloped shelf Depth W 000 mm W 750 mm Depth W 000 mm W 750 mm Depth W 000 mm W 750 mm Depth W 000 mm W 750 mm Depth W 000 mm W 750 mm , , , , , , , , , , , , , , , , , , , , , , , , , , Damit Ordner nicht an die Wand stoßen. Movabe divider Clip End support for wall protection Shelf insert Shelf box with 60-mm high front edge Shelf box with 30-mm high front edge Depth Depth W 000 mm W 750 mm W 000 mm W 750 mm Depth W 000 mm Depth W 000 mm , , , , ,0 89 8, , , , , , ,80 48

49 Cantilever shelving Univers Shelving vertical supports Max. load per shelf: up to 300 mm deep 80 kg from 400mm deep 00 kg Max. load per shelf unit One-sided 400 kg 40 Double-sided 800kg 760 Individual combination items: Single sided shelving Double sided shelving Max. load per shelf: Total: 5kg 75kg Depth Shelving unit frame Extension shelving frame Shelving unit frame Extension shelving frame H 000 mm , , , , H 50 mm , , , , H 500 mm , , , , H 000 mm , , 8746, , H 50 mm 898 9, , , , H 500 mm , 87 59, , , Side mounted reading panel Melamine-covered desk top W 500 x D 300 mm Book trolley - 3 levels with central divider, rubber castors Ø 5 mm W 900 x D 600 x H 00 mm , , 6 A4 A4 7 Shelf with slide flaps Hanging-file support Slideable hanging file frame Telescopic shelf Flaps are 30 mm wide For stability only per shelf unit Shelf with side supports with transparent foil Depth W 000 mm and pull out shelf Depth W 000 mm Leitz/Elba Depth W 000 mm Depth W 000 mm , , , , Dividers for shelf box Sliding-door cabinet Header unit without lighting x height adjustable shelf; Depth W 000 mm W 750 mm Accessories Guiders set ( pcs) ,80 cabinet with cylindrical lock , , Lateral clip ,30 Divider 95 high ,50 Depth W 000 mm With lighting incl. 5 W fluorescent Lamp and electrical connections Corridor sign right ,0 Divider 30 high , , , , Corridor sign left , rechts links max.50 mm For safety reasons, shelves that are higher than metres must be secured to either the wall or ceiling. Wall connector Ceiling connector 5087, ,0 max. 500 mm Shelf vertical upright connector, please Quote the exact length required Vertical upright connector per metre 8688,40 Inscription rail: Transparent plastic, self-adhesive, with white cardboard je angef. m 533 5, 49

50 Library shelving Libra Libra Library shelving in a modern design with numerous variation possibilities. A feature of the construction are the light but very stable 3 round steel tubular vertical upright profiles, with diagonal welded metal stabilisers. All parts are powder coated in black RAL 90, the frame has adjusting screws enabling a stable level assembly. The uprights have slots in them at 0 mm intervals for the fixture of the shelves. The individual shelves are available in E grade wood with melamine surfaces in beech, or steel shelves powder coated in light grey RAL 7035 colour. The shelves are available with a 90 edge which is 40 mm high. 3 Steel Shelf in light grey without 90 edge Steel Shelf in light grey with 90 edge Wooden shelf Beech veneer with 90 edge Depth 50 Depth 300 Depth 50 Depth 300 Depth 50 Depth kg 400 kg Load capacity per shelf: Load capacity per unit: Total width of shelf unit = width quoted + 5 mm/shelf + 40 mm Unit securing kit for securing together two units back to back (6 x pcs) 85,0 Additional items Steel shelves without edge Steel shelves with edge Wooden shelves with edge D 50 D 300 D 50 D 300 D 50 D 300

51 Library shelving Libra Slot-in information fascia panel 00 mm high. Normal shelves and angled shelves are adjustable in height in 0 mm intervals. 7 Shelving in width options, utilizing room space. Combined in width range steps of 50 mm External corner shelves for double sided units. (at 90 to each other). The wooden shelves have a rounded edge (see previous page) the steel shelves have a straight edge. etc H 930 mm, complete with shelves H 300 mm complete with shelves Shelf unit W 000 support 5 shelves 40 83, ,- 0 07,- 30 9, , ,- 000 Shelf unit W 750 support 5 shelves 4 77, ,- 00,- 3 0,- 3 80,- 33 9,- Shelf unit W 000 support shelf 4 sloped shelves ,- 3 4, ,- Shelf unit W 750 support shelf 4 sloped shelves , , ,- 000 Vertical end support column for the end of the row 8 87, , ,- 8 87, ,- External corner unit for doublesided racks x depth + 60 mm 9 43, ,- 9 43, , , , , ,- 0 48, , , ,- 4,- 44 4,- 39,- 4 5, , , ,- 4 59, , ,- 43 5, , , ,- 8 99, ,- 8 99, ,- External corner unit for doublesided racks x depth + 60 mm 9 97,- 49 3,- 9 97,- 49 3, , , Additional shelf Additional shelf Add. angled shelf Add. angled shelf Additional side Movable divider Facia panel Facia panel W 000 mm W 750 mm W 000 mm W 750 mm support Inscribable W 000 mm W 750 mm 97 9, ,80 8, , , , ,- 98 3,80 83, , ,0 8 5,0 90 3,80 9,40 8, , , , ,- 98 3,80 83, , ,0 8 5, , ,90 8, , 395 4, , , ,0 83, , ,0 8 5,0 Shelf unit W 000 support 6 shelves Shelf unit W 750 support 6 shelves Shelf unit W 000 support shelf 5 sloped shelves Shelf unit W 750 support shelf 5 sloped shelves Vertical end support column for the end of the row

52 Storage shelving Stora kg STORA 00 Medium heavy construction for load capacity up to 00 kg * Extremely stable slot assembly elements, the use of corner units and combination of 000 and 750 mm wide shelving allows optimal usage of room space. Available in 3 different heights and 4 depth ranges, either with or without rear walls, and upright side panel fascia. Frame uprights are steel box section with smooth front surfaces. Shelves have a 40 mm edging for greater stability and are height adjustable in 59 mm steps. Load capacity per shelf 00 kg. All parts are polyester powder coated, in the following colour combinations, black RAL 90 and light grey RAL 7035 or silver RAL 9006 and light grey RAL Width of shelving unit = Quoted dimension + 30 mm, and additional 0 mm per Depth of unit = Quoted dimension + 40 mm W 000 W 750 Corner shelf Tiefe depht depht Tiefe H 900 mm with 5 shelves with rear wall 4 depths available: Also available in silver/light grey D 300 D 400 D 500 D 600 Shelving unit W 000 Shelving unit W 750 Corner unit depth Shelving unit W 000 with rear wall Shelving unit W 750 with rear wall Corner unit depth with rear wall Vertical end support black/light-grey silver/light-grey , 34,- 46,- 39,- 4,- 357,- 49,- black/light-grey silver/light-grey ,- 66,- 75,- 7,- 57,- 389,- 5,- black/light-grey silver/light-grey ,- 9,- 33,- 9,- 77,- 448,- 59,- black/light-grey silver/light-grey ,- 08,- 36,- 3,- 9,- 478,- 6,- Side fascia panels for vertical uprights. 3 Load capacity/shelf kg Load capacity/unit kg 5 With load equally distributed *For increased load capacity, please see shelving Progress 000, p 46/47 Side fascia H 900 Side fascia H 50 Side fascia H 600 D , , ,- D , ,- 84 6,- D , , ,- D , , ,-

53 Tiefe Tiefe Tiefe Tiefe H 50 mm with 6 shelves with rear wall H 600 mm with 7 shelves with rear wall D 300 D 400 D 500 D 600 Shelving unit W 000 Shelving unit W 750 Corner unit depth Shelving unit W 000 with rear wall Shelving unit W 750 with rear wall Corner unit depth with rear wall Vertical end support black/light-grey silver/light-grey ,- 66,- 95,- 9,- 84,- 47,- 67,- black/light-grey silver/light-grey ,- 0,- 33,- 33,- 30,- 460,- 77,- black/light-grey silver/light-grey ,- 34,- 403,- 355,- 344,- 540,- 83,- black/light-grey silver/light-grey ,- 7,- 47,- 395,- 370,- 605,- 89,- Shelving unit W 000 Shelving unit W 750 Corner unit 370 +depth Shelving unit W 000 with rear wall Shelving unit W 750 with rear wall Corner unit depth with rear wall Vertical end support ,- 93,- 335,- 33,- 39,- 504,- 77, ,- 33,- 37,- 376,- 363,- 538,- 83, ,- 65,- 448,- 47,- 403,- 60,- 86, ,- 98,- 5,- 448,- 436,- 674,- 9,- Extra items Shelf W 000 Shelf W 750 Corner shelf Movable divider Side support Inscription rail D , , , , ,80 transparent plastic, D , , , , ,0 self-adhesive, with white D , , , , ,90 cardboard D , , , , ,0 533 per metre 5, 53

54 Storage shelving Status Upright supports in blue or alusilver powder coated Storage shelving Status A highly stable and sturdy shelving system. Each single unit has a load capacity of 750 kg. The load capacity of each shelf is kg. A combination of 000 and 750 mm widths enable optimal room space utilization. Stable square box section uprights in alusilver or blue colour. The shelves in light grey with a 40 mm edge. The shelves are adjustable in height in steps of 9 mm, enabling flexibility depending on what you wish to store. These units are available in 3 heights (800, 00, and 600 mm) and 4 depths (300, 400, 500 and 600 mm). Load capacity of shelves: Depth 300 and 400 mm = 00 kg each Depth 500 and 600 mm = 0 kg each With shelf support = + 30 kg Height 800 mm with 4 shelves Height 00 mm with 5 shelves Height 600 mm with 6 shelves alusilver blue depth mm Shelf W 000 mm # 76 # ,- Shelf W 750 mm # 77 # 764 7,- Vertical end support # 740 # 768 0,- Shelf W 000 mm # 76 # 77 4,- Shelf W 750 mm # 77 # 776,- End support # 74 # 780 3,- Shelf W 000 mm # 736 # 784 7,- Shelf W 750 mm # 737 # ,- Vertical end support # 74 # 79 57,- alusilver blue # 70 # 76 08,- # 73 # ,- # 70 # 769 7,- # 70 # 773 5,- # 73 # 777 4,- # 704 # 78 44,- # 730 # 785 9,- # 733 # ,- # 707 # ,- alusilver blue # 7 # 76 39,- # 74 # 766 9,- # 70 # 770 4,- # 7 # ,- # 74 # ,- # 705 # 78 59,- # 73 # ,- # 734 # ,- # 708 # ,- alusilver blue # 7 # ,- # 75 # ,- # 703 # 77 59,- # 7 # ,- # 75 # ,- # 706 # ,- # 73 # ,- # 735 # ,- # 709 # ,- 54

55 Storage shelving Status Accessories: 300 Additional shelf W 000 mm W 750 mm. Shelf support (max. per shelf) Increases in carrying capacity/shelf: 30 kg (to be placed underneath the shelf). Movable shelf dividers H 300 mm D 300 # 770 5,70 # 774 4,80 # ,40 D 400 # 77 0,30 # 775 9,80 # ,0 # ,0 D 500 # 77 4,90 # 776 4,0 # ,50 # ,80 D 600 # 773 9,50 # 777 8,50 # ,0 # ,90 55

56 Information signs & Trolleys Information signs Daily These signs have a steel frame powder coated in alusilver colour. The signs has a transparent acrylic sheet at the front. Contents are easily and quickly changed by simply pulling the information sheet out from between the acrylic sheet and frame, and sliding a new one in. Daily DIN A4 ( 55 x 0 x 340 mm) set of # 6500 set 47,- Daily DIN A3 (350 x 0 x 470 mm) # ,- DIN A4 DIN A3 3 Serving trolley Office trolley 3 File-Trolley Artline II Stable steel construction with 3 shelves. Colour: chrome/aluminium silver. Dimensions: W 700 x D 400 x H 840 mm. with shelves for files. Colour: chrome/aluminium silver. Dimension: W 700 x D 400 x H 840 mm. Serving trolley Artline # ,- office trolley Artline # ,- With sliding Drawers for hanging-files. Colour: chrome/aluminium silver. Dimension: W 85 x D 435 x H 800 mm. File-Trolley Artline II # ,- 5/057 All prices are exclusive value added tax. All prices are RRP, ex-works not including VAT, packaging or freight costs. Payment terms, within 0 days % discount, payment within 30 days net. Right of return within 0 days in the original packaging. theo kerkmann Büromöbelfabrik GmbH & Co. KG Kerkmannstraße 3379 Bielefeld-Brake Germany Tel.: +49 (0) Fax: +49 (0) info@kerkmann.de internet: