SLASHER GEARBOXES PART NO. RATIO HP RATING INPUT SHAFT COMMENTS : hp 1 3/8 6 spline PART NO. RATIO HP RATING INPUT SHAFT COMMENTS

Transcription

1 january 2013

2 SLASHER GEARBOXES PART NO. RATIO HP RATING INPUT SHAFT COMMENTS : hp 1 3/8 6 spline Replaces: Borg Warner series and Comer LF135A Used on: Sabre slashers and smaller Mowzip Most Popular PART NO. RATIO HP RATING INPUT SHAFT COMMENTS : hp 1 3/8 6 spline : hp 1 3/8 6 spline : hp 1 3/8 6 spline : hp 1 3/8 6 spline Most Popular Replaces: Borg Warner series and Comer LF17A Used on: M-Series, Park Mowers, Gearmowers, XHD and Mowzip PART NO. RATIO HP RATING INPUT SHAFT COMMENTS :1 (1000rpm) 130 hp 1 3/4 20 spline :1.46 (540 hp) 1:1.21 (1000rpm) 130 hp 130 hp 130 hp 130 hp 1 3/4 20 spline 1 3/4 20 spline :1 130 hp 1 3/4 20 spline Replaces: Borg Warner WA57 and Comer 274.D (re drill deck to mount) Used on: HD Series, slashers, etc PART NO. RATIO HP RATING INPUT SHAFT COMMENTS : hp 1 3/4 20 spline Use with /405/261 on multihead slashers Used on: Gearmower 300 and 330 models PART NO. RATIO HP RATING INPUT SHAFT COMMENTS : hp 1 3/4 20 spline Very heavy duty Brushcutter gearbox R 1:1.47 (540 rpm) 230 hp 1 3/4 6 spline Used on: Jumbo and Titan rotary R 1:2.1 (1000rpm) 230 hp 1 3/4 6 spline slashers 4

3 BELT DRIVE MOWER GEARBOXES PART NO. RATIO OUTPUT SHAFT COMMENTS 2041.T4F 1: hole Flange Replaces: Corner T-4A & T-4F Ferguson FE-35& FE65 PART NO. RATIO OUTPUT SHAFT COMMENTS TL :3 4 hole Flange Suits later model Mowzips PART NO. RATIO HP OUTPUT SHAFT COMMENTS : mm Suits Miniparkmower: (40hp) Replaces Comer T 19A : mm Suits flail mulchers/forages (75hp) PART NO. RATIO HP OUTPUT SHAFT COMMENTS : /4 Suits Liteweight Finishing Mowers : /4 OM/PM Fieldmaster CENTRE T GEARBOXES PART NO. RATIO HP INPUT SHAFT COMMENTS G111 1: /8 6 spline GM160 Centre Gearbox G111 1: /8 6 spline Pre-2006 Gearmower : /8 6 spline Standard Gearmower Centre Gearbox : /4 20 spline Gm270 Centre Gearbox G444 1: /4 20 spline Titan Centre Gearbox : /8 6 spline (4 shaft) - has rear PTO as well POST HOLE DIGGER GEARBOXES PART NO. RATIO HP OUTPUT SHAFT INPUT SHAFT : mm (2 ) 1 1/4 Plain Shaft (Eiz-bore 40) : mm (2 ) 1 1/4 Plain Shaft (Ezi-bore 80) Post hole digger gearboxes are to be used with shear pin yokes. See driveshafts to suit on Page 3. 5

4 SLIP-ON FRICTION SLIP CLUTCHES Complete Clutch PART NO. DESCRIPTION NO. DISCS USED ON Friction Clutch Suits 15-40hp (1 3/8 x 6 spline) Friction Clutch Suits 30-85hp (1 3/8 x 6 spline) Friction Clutch Suits hp (1 3/8 X 6 spline) Friction Clutch Suits hp (1 3/4 x 20 spline) 2 Sabre 2 M-Series/ GMT/GMR/GMS 4 HD/GMM HD Series/Jumbo/GMM FRICTION SLIP CLUTCH DISCS Clutch disc/linings PART NO. DESCRIPTION USED ON x 130mm Clutch disc only (8 ) Gallagher Clutch A 152 x 90mm Clutch disc only x 97mm Clutch disc only FF 2/4 - (A ) x 77mm Clutch disc only x 84mm Clutch disc only FF 1/ x 85mm Clutch disc only FV 42/44 - GM x 63mm Clutch disc only GM Slide on (HD) PTO DRIVESHAFTS PART NO. HP LENGTH IMPLEMENT END TRACTOR END USED ON A cm 1 ⅜ X6 1 ⅜ X6 Sabre 1200 A cm 1 ⅜ X6 1 ⅜ X6 Sabre 1500 A cm Plain Bone 1 ⅜ X6 40hp Post Hole Digger A cm 1 ¾ x20 1 ¾ x20 Cross Shaft GM300 A cm 1 ⅜ X6 1 ⅜ X6 M-Series, Belt Drive Toppers, Park Mowers PM/TM/GM A cm Plain Bone 1 ⅜ x6 75hp Post Hole Digger A cm 1 ¾ X20 1 ⅜ X6 GMM300 A cm 1 ¾ X20 1 ⅜ X6 GMM270/ JUMBO A cm 1 ⅜ x6 1 ⅜ X6 Miscl general HD Shaft 6

5 STEPPED & KINKED FLAILS Stepped Stepped Cutting edge both sides PART NO. LENGTH WIDTH THICKNESS STEP HOLE Ø FIXING SUITS / P Mowzip / P Mowzip / P Mowzip / P Mowzip / P Mowzip / P Mowzip / P Flailmaster / P Fieldmaster P Fieldmaster V V6016 Vogal Gallagher 1563-J / P Fieldmaster P Fieldmaster P Fieldmaster / P Fieldmaster / P Mowzip / Giltrap / Giltrap PART NO. LENGTH WIDTH THICKNESS HOLE Ø FIXING SUITS Stepped & Twisted Stepped & Twisted RH cuts opposite way to pic shown 1050 LH 1050 RH / Gearmower LH HD / RH 2443 Gearmower 200 & LH HD70 (4 blade) / RH 2443 Gearmower 230 & / HD80 (4 blade) 1080 LH 1080 RH 100-L 100-R 200-L 200-R 300-L 300-R 500-L 500-R / M80, HD70 Gearmower / & 188 Infield GM140/GM / & 188 Infield GM140/GM / & 188 Infield / & 188 Infield (2 slight kinks) (1 x slight kink) PART NO. LENGTH WIDTH THICKNESS HOLE Ø FIXING SUITS / P Flailmaster / P Fieldmaster mm 1045/8.2.2 Batwing / & Old Jumbo 7

6 FLAT FLAIL BLADES PART NO. LENGTH WIDTH THICKNESS HOLE Ø FIXING SUITS / Bisley / P Flailmaster 1010A / P Flailmaster / Flailmaster 1011A / Flailmaster / / Flailmaster / /03.01 Flailmaster LH / / FM Titan RH / P Flailmaster / Flailmaster RH cuts to opposite way to picture shown PART NO. LENGTH WIDTH THICKNESS HOLE FIXING SUITS / P Mowzip /4 2443/377PL GMM 140/ /4 2443/377PL GMM / /377PL Flailmaster / P Mowzip / Mowzip / P Mowzip /4 2443/377PL GMM 200/ / /377PL Flailmaster /4 2443/377PL GMM MM 1045/ Batwing / /377PL Flailmaster / P Mowzip /4 2443/377PL GMM /8 NOW USE Blade & Bush has a second hole (not pictured) for fitting mulching flail tips HOT-SKIDS SKID WEAR SHOES PART NO. DESCRIPTION x pair shoes (1600mm long) - Weld on. 1 x pair of concave shaped, heat treated, wear resistant skid shoes. Tack weld fits to most size skid runners, pipe, etc, for long life, hard wearing. Formed front radius for leading edge. 8

7 ROTARY MULCHER MULTICUT FLAILS MACHINE STRAIGHT CENTRE FLAIL KINKED FLAIL See page 30 for more Mulcher blade options and details FASTENERS GMM 140/ GMM 180 GMM200/300 GMM P Pack Consitis Of: 2x188 - BOLTS 2x368B - LOCK NUTS 4x BUSHES 4x WASHERS GMM SWING LENGTH (MM) 250 HAY KNIFE TIPS/CUTTER TIPS PART NO. TYPE LENGTH WIDTH THICKNESS HOLE FIXING SUITS 9408 A E 9225 Faher, Welger, PZ 9410 A E 9225 Faher, Claas, PZ 9432 A D 9205 UFO Single 9433 A E 9206 UFO Twin, Maxum 9460 C E 9225 PZ 9440 A E 9222 Tarup 9437-LH B F 9210 Vicon, Lely 9438-RH B F 9210 Vicon, Lely 2497 B F 2498 Mowzip - Razortip LH B E 2365 Fieldmaster Gold Tip RH B E 2365 Fieldmaster Gold Tip GOLD-TIP FLAILS H Used on all latest model Fieldmaster model TM/PM and GMT pasture Toppers and Parks Roller Mowers. FLAIL PART NO. O/A LENGTH WIDTH THICKNESS HOLE BOLT PART NO LH RH

8 STEPPED CUTTERBARS Small Wing PART NO. LENGTH WIDTH THICKNESS STEP FIXING SUITS Fieldmaster 1560-J M800/Broadacre Fieldmaster Broadacre 225/M Broadcare Broadcare Broadcare 330 additional hole each end (not pitched) for top strengthening bar Hi Wing (better lift) PART NO. LENGTH WIDTH THICKNESS STEP FIXING HI-WING OPTION 1560-M Fieldmaster M000/ M Fieldmaster M900/225 No Wing PART NO. LENGTH WIDTH THICKNESS STEP FIXING NO WING OPTION 1560-J Fieldmaster M800/ M Fieldmaster M900/225 PART NO. LENGTH WIDTH THICKNESS STEP SUITS (50) 60 (8) 6 25 Fieldmaster Estate (50) 60 (8) 6 25 Fieldmaster Estate (50) 60 (8) 6 30 Fieldmaster Estate RH Estate Quad RH Estate Quad RH Estate Quad 72 RH cuts opposite way to pic shown PART NO. LENGTH WIDTH THICKNESS STEP FIXING SUITS P Mowzip Wizard Mowzip M/P Mowzip PART NO. LENGTH WIDTH THICKNESS STEP FIXING SUITS P Mowzip 1830 Topper P Mowzip 2290 Topper P Mowzip (can use 2355) P Mowzip Ag Mark 3.0m PART NO. LENGTH WIDTH THICKNESS STEP FIXING SUITS Old Mowzip Old Mowzip Old Mowzip

9 TWISTED/KINKED END CUTTERBARS PART NO. LENGTH WIDTH THICKNESS FIXING SUITS Fieldmaster A Fieldmaster Old 9 Model PART NO. LENGTH WIDTH THICKNESS FIXING SUITS Old Style Broadcare Old Style Broadcare Old Style Broadcare 330 PART NO. LENGTH WIDTH THICKNESS FIXING SUITS Fieldmaster PART NO. LENGTH WIDTH THICKNESS FIXING SUITS P Mowzip Wizard Mowzip M/P1800 Wing Wing 2398 (TP102) M600/1520 Minipark Mower M700/180 Minipark Mower PART NO. LENGTH WIDTH THICKNESS FIXING SUITS P Mowzip Parkmower P Mowzip Parkmower P Mowzip PART NO. LENGTH WIDTH THICKNESS FIXING SUITS Mowzip Obsolete - now use 2417 and re-drill spindle base. PART NO. LENGTH WIDTH THICKNESS FIXING SUITS Mowzip 9 Super orchard Mowzip Mowzip 11

10 TIPS, BLADES & CARRIERS Gold tip blades Gold tip blades (with adapter) Shear-tip blades (145mm long) 4a ITEM PART NO DESCRIPTION Blade Carrier with hub Blade Carrier with hub (180 only) Blade Beam (480mm o/a) Blade Beam - 210/WM340 (535mm o/a) Blade Beam (640mm o/a) Blade Beam (755mm o/a) Blade Beam (605mm o/a) Beam Mounting Bolt (pack of 8) Gold Tip Flail Bolt & Nut 4a 2358 Shear-tip Flail Bolt/Nut (hex head) Gold Tip Flail (LH) Gold TIp Flail (RH) 6 For TM/PM Now use Item 2 (without 2364 adaptor plate) Old Model Gearmower 180 Blade Beam (750mm o/a) Old Model Gearmower 200/300 Blade Beam (860mm o/a) Old Model Gearmower 230 Blade Beam (980mm o/a) Old Model Gearmower 270 Blade Beam (1200mm o/a) Gold Tip Flail Adaptor Plate Countersink Mounting Bolt/Nut Shear-Tip' Winged Flail LH 2362 Shear Tip Winged Flail RH Shear Bolt & Nut N/S 1560-J2 Stepped Cutterbar (5000 Series) N/S Stepped Cutterbar (5000 Series) N/S Stepped Cutterbar (5000 Series) N/S Stepped Cutterbar (5000 Series) MANUAL HOLDERS New regulations require Operator Manuals to be attached to machinery. Handy weatherproof screw cap canister holders can be easily attached to machinery. Available in two sizes to suit A5 and A4 documents. PART NO DIAMETER LENGTH SUITS mm 300mm A mm 300mm A4 12

11 GOLD TIP FLAIL CONVERSIONS For when converting from standard slasher blades to fine cutting Gold Tips 5 6 ITEM PART NO SWING LENGTH (MM) DESCRIPTION (FITS MODELS & BLADE) GM160 (1040) GM180 (1050) GM200/300 (1060) Sabre 1200 (1572) GM230 (1070) SABRE 1500 MX70 4BL (1567) GM270/M80 (1080) LH Flail (Gold-Tip) RH Flail (Gold-Tip) Flail Bolt/Nut Weld On Protector Ring swing length = centre of hole to end of flail tip SHEAR TIP TO GOLD TIP CONVERSIONS For later model mushroom formed end flail tip beams see item 2 on previous page NO PART NO ITEM DESCRIPTION Adaptor Gold Tip LH Gold Tip RH Flail Bolt Flail Serrated Flange Nut 6/ Mtg. Bolt/Nut FLAIL BEAM ITEM No (1) OVERALL CUT WIDTH INCL. FLAIL TIPS (mm) USED ON MODEL M600/MP M700/MP PM/TM J M800/BA J PM/TM PM/TM300/M900/ PM/TM PM/TM270/BA BA305 Broadacre BA330 Broadacre Old model GMT Old model GMT200/ Old model GMT230/ Old model GMT270 13

12 FLAIL TIPS/CUTTER TIPS PART NO. LENGTH WIDTH THICKNESS HOLE FIXING SUITS / Fieldmaster / Mowmaster Ultra Cut / Fieldmaster (Q.T) Gallagher 1.1m Slasher / Fieldmaster / Fieldmaster (Q.T - XL) Quadtoppers have been retrofilled to use 2361 Flails with new blade beam. PART NO. LENGTH WIDTH THICKNESS HOLE FIXING SUITS / Fieldmaster PART NO. LENGTH WIDTH THICKNESS HOLE FIXING SUITS / Trimax 2361 LH / Fieldmaster (Shear-Tip) 2362 RH / Fieldmaster (Shear-Tip) / / / / / P Mowzip LH Fieldmaster RH or 1004 Fieldmaster PART NO. LENGTH WIDTH THICKNESS HOLE FIXING SUITS / Fieldmaster / Broadcare / Broadcare / Broadcare 330 GMM MULTI-CUT TIPS PART NO. LENGTH WIDTH THICKNESS HOLE FIXING SUITS P GMM H P Tungsten Hard-Faced P GMM

13 Cast/Foraged Cast/Foraged PART NO. LENGTH WIDTH THICKNESS HOLE Ø FIXING SUITS FK /2 BFB/001 Buckton MK /2 BFB/001 Buckton / Gallagher Rotomow & Pulverizer / Gallagher Multicut Forager Spring Steel 1569 PART NO. 200 LENGTH 60 WIDTH THICKNESS 6 HOLE 19 3/4 FIXING x4 B/N Fieldmaster SUITS Forager 219C FK001 MK / / /2 3/4 1/2 7/8 BFB/001 BFB/ Greens BucktonForager Buckton Gallagher Rotomow & Pulverizer Spring Steel PART NO. LENGTH WIDTH THICKNESS HOLE Ø FIXING Gallagher SUITS Multicut / Gallagher Forager Rotomow H / /4 X 4 B/N Fieldmaster & Pulverizer Forager C /2 3/8 10 3/4 7/ Gallagher Finecut Greens Forager Forager Fabricated & Welded Fabricated & Welded Cast/Foraged FLAILS FOR FLAILMOWERS & MULCHERS PART NO. LENGTH WIDTH THICKNESS HOLE FIXING SUITS Gallagher Rotomow / & Pulverizer Gallagher Finecut / PART NO. LENGTH WIDTH HOLE Ø FIXING Forager SUITS / EFI Mowzip Panda 2401 PART NO. 105 LENGTH WIDTH 115 HOLE 5/8 FIXING 2447 EFI Mowzip Grizzly SUITS MP/ / Berti EFI Mowzip Panda / EFI Mowzip Grizzly MP/ Berti Spring Steel Spring Steel Spring Steel PART NO. LENGTH WIDTH HOLE Ø FIXING SUITS PART NO. LENGTH WIDTH HOLE FIXING SUITS / EFI Mowzip Panda PART 2404 NO. 105LENGTH 75 WIDTH 5/8 HOLE 2448 Ø FIXING EFI Mowzip SUITS Panda / EFI Mowzip Grizzly /8 5/ EFI EFI Mowzip Mowzip GrizzlyPanda / EFI Mowzip Grizzly FLAIL/BLADE BOLT FIXING PACKS FLAIL / BLADE BOLT FIXING PACKS PART NO. LENGTH WIDTH HOLE Ø FIXING SUITS Trimax PART NO. LENGTH 84 WIDTH 57 HOLE 10 Ø FIXING SUITS Ezeemow Trimax Trimax Ezeemow Ezeemow Trimax Flaildeck/Mowcraft Ezeemow 2 PACK NO. CONSISTS OF BOLT NUT BUSH/ WASHER26140/ SUITS Trimax Spring Spring Steel BUSH Flaildeck/Mowcraft / SUITS x Bolts, Nuts & Spring Washers PACK (1 1/2 NO. long) Y CONSISTS Y OF Y BOLT S/N NUT Fieldmaster Steel Gamma 26140/ WASHER Belt drive mowers Trimax Spring Spring Steel X Bolts, Nuts 77 & Spring Washers x Bolts, Nuts & Spring washers (1 3/4 long) Y Y Y Fieldmaster S/N Fieldmaster Steel Belt Gamma drive mowers x Bolts, Nuts & Spring Washers Fieldmaster 188-P 2 x Flail = Bolts, Most Nuts, Popular Bushes & Option Split Pins# = RH Cuts 188 to opposite 368 way 1778to picture shown Sabre/M Series 188-P 2 x Flail Bolts, Nuts, Bushes & Split Pins Fieldmaster 1009-P 4 x Flail Bolts, Nuts & Split Pins 1009 Page Old Style HD 1008-P 4 x Flail Bolts, Nuts, Bushes & Split Pins Old Style HD 1009-P 4 x Flail Bolts, Nuts & Split Pins Fieldmaster 1008-P 4 x Flail Bolts, Nuts, Bushes & Split Pins Fieldmaster P 4 x Flail Bolts, Nuts, Bushes & Split Pins Fieldmaster P 4 x Flail Bolts, Nuts, Bushes & Split Pins Fieldmaster 2446-P 2 x Flail Bolts, Nuts & 8mm Bushes Mowzip 2445-P 2 x Flail Bolts, Nuts & 10mm Bushes Mowzip 2446-P 2 x Flail Bolts, Nuts & 8mm Bushes 2446 Y 2421 Mowzip (mini) 2423-P 2 x Bolts, Nuts & Spring Washers 2423 Mowzip 2445-P 2 x Flail Bolts, Nuts & 10mm Bushes 2446 Y 2420 Mowzip 189-P 2 x Bolts, Nuts, Washers, 4 Bushes for GMM PACK NO. Multicut Mulcher Flails 2360-P (No Wing) 2361-P (LH-wing) 2362-P Suits Flail Sheer Shear-Tip 188 and wingtip replacement 368B pack 1778of Flail Tip Fieldmaster bolts & bolts & GMM Multicut 2 flail tips, 2 flail bolts and lock nuts, 2 shear nuts nuts bolts and nuts to suit all Fieldmaster toppers 2x 2x 2 x 2360 shear tips shear-tip and mowers fitted with shear tip' /wingtip 2 x x 2x Wing-tips wing-tips cutters 2 x x 2x Wing-tips 15

14 FLAIL BOLTS, NUTS & BUSHES Straight Flail Bolt (Most Common) (Most Common) PART NO. A B C (o/a) Nut 1659 M16 1 7/8 2 9/32 incl /8 3 1/4 3 3/4 incl /8 3 3/4 4 1/4 incl 188 3/4 2 1/4 2 3/ /4 2 1/ /4 2 1/4 2 3/4 368B /8 2 1/8 2 5/ /8 2 1/ / / /8 2 13/ V incl D PART NO. A B C (o/a) D E NUT / included / included / / / PL / / PL / / PL / / PL / /2 1/ / / Stepped Flail Bolt Castle/Slotted Nuts PART NO. THREAD DESCRIPTION 368 3/4 Castlenut 377 7/8 Castlenut UNF Castlenut /4 Castlenut 367 M20 x 1.5 Castlenut M30 x 2.0 Castlenut x 14TPI Flanged Hub - Castlenut 16 Hardened Flail Bushes PART NO. O.D I.D THICKNESS SUITS /4 6.5mm Fieldmaster /4 10.5mm Sabre/M Series /4 3/4 8.5mm Mowzip /4 3/4 10mm Mowzip /4 3/4 14mm Infield /4 7/8 10.2mm F/M - Mowzip /2 3/4 1/2 Misc /2 7/8 10.5mm Flailmaster /2 7/8 13mm Flailmaster Jumbo /2 7/8 16.5mm Flailmaster /2 1 13mm Flailmaster mm mm Gallagher/Misc. V mm 1 12mm Vogal

15 SPINDLE ASSEMBLY CAST HOUSING, TAPER ENDS ON SPINDLES Used on old Fieldmaster mower prior to 1997 ITEM PART NO DESCRIPTION QTY 1 F Housing 1 2 F Spindle 1 2 F HD Heavy duty spindle 1 3 F1191 Bearings 2 4 F4013 Oil seal 1 5 F Oil seal housing 1 6 F4014 V ring 1 7 F3509 Grease nipple 1 8 F4011/12 Z type washer 1 10 F2206 Circlip 1 N/S F50403 Grub screw 1 N/S F Mounting bolt - long 1 N/S F Mounting bolt - short 1 N/S Spindle repair kit (brgs, seals etc) 1 MOWZIP 2000 SERIES SPINDLE ITEM PART NO DESCRIPTION B Groove Pulley (metric) 150mm diameter B Groove Pulley (metric) 150mm diameter Housing Standard (275mm) 2532 Housing Low Profile Spindle Standard (360mm long o/a) 2511 Low profile spindle (260mm long o/a) 26a 2691 Woodruff key Bearing Spacer (215mm - 3 bearing spacer) 2527 Bearing Spacer (234mm - 2 bearing spacer) 2528 Bearing Spacer (134mm - low profile spindle) Bearing (later models have 3X Bearings) Nyloc nut H.D. Washer Blade moutning bolt/nut 32 Blade - see pages Antiscalp Saucer Blade support plate N/S 2535 Spacer Washer (between top 2 bearings) N/S 2501 Taper Bearing Washer (under lower bearing) MOWER SPINDLE REPAIR KITS PART NO. SUITS MACHINE/SPINDLE Fieldmaster, up to 2006 (blue houseing and taper spindles) 2000 Mowzip 2 Bearing Spindles (2000 Series) 2001 Mowzip 3 Bearing Spindles (2000 Series) 2002 Mowmaster Spindles (tapered brgs) Fieldmaster 2006 (yellow housing and non-taper spindles) Fieldmaster Kng Spindle (red housing and three bearings) Kits consist of all required wearing parts, ie - bearing seals, circlips, v-rings, etc, as applicable for a hassle-free overhaul 17

16 SPINDLE ASSEMBLY IDENTIFY BY: YELLOW HOUSING, YELLOW PULLEYS Note: Parallel Ends (not tapered) ITEM PART NO DESCRIPTION Spindle housing HD Spindle shaft 3 Weld on hub Oil seal spacer Bearing - sealed Oil Seal Castlenut/ Locknut H.D. Washer Used on Fieldmaster 5000 series mowers from 2006 onwards YELLOW HOUSING SPINDLE ASSEMBLY IDENTIFY BY: BLUE HOUSING, BLUE PULLEYS Note: Tapered Ends on Spindles ITEM PART NO DESCRIPTION Spindle housing - blue HD Spindle shaft (tapered top & bottom) Circlip Threaded oil seal cap/housing Bearing - unseated V ring - Rubber Oil seal HD spindle washer Spindle lock nut /12 Z type steel seal N/S 3617 Spindle-key (for pulley & hub) Used on Fieldmaster Broadacre mowers BLUE HOUSING

17 HD KING SPINDLE ASSEMBLY IDENTIFY BY: RED HOUSING, RED PULLEYS ITEM PART NO DESCRIPTION Double Lip Oil Seal Blade Carrier Hardened Washer Castlenut M Housing (Red) Internal Loading Rint Nut Dust Cover Upper Spacer HD Spindle Shaft Deep Groove Ball Bearing Snap ring A30 DIN Used on Fieldmaster HD Park Mowers 5000 series mowers from 2011 onwards RED HOUSING MINI PARK MOWER SPINDLE ASSEMBLY MINIPARK MOWER M600/M700/1520/1830 & PMM ITEM PART NO DESCRIPTION Complete Assembly Spindle Housing Spindle Shaft Only Spindle Base Plate Lower Spindle Key 370 Base Plate Locknut Spacer Bearing - Sealed Oil Seal - Top Pulley H.D. Washer Spindle/Pulley Castlenut 19

18 PHONE: FAX: