TECHNICAL GUIDE MODELS: MA MODULAR AIR HANDLERS FOR USE WITH SPLIT SYSTEM COOLING & HEAT PUMP DESCRIPTION FEATURES
|
|
- Elvin Morris
- 5 years ago
- Views:
Transcription
1 TEHNIL GUIDE MODELS: MODULR IR HNDLERS FOR USE WITH SPLIT SYSTEM OOLING & HET PUMP FM BLOWERS 2-5 TON OILS OPTIONL 1 & 3φ ELETRI HETERS ISO 9001 ertified Quality Management System Due to continuous product improvement, specifications subject to change without notice. Visit us on the web at dditional rating information can be found at BTG-D-0806 DESRIPTION This unique modular system allows the flexibility to handle any application. These versatile coils and blowers may be used for upflow, down-flow, or horizontal left or right applications. They may be combined to function as a cooling only unit or with a heat pump including electric heat for 1 and 3 phase applications. The blower and electric heater could be used as stand alone electric furnaces. FETURES BLOWERS - to match any air flow or voltage requirement. The compact size allows easy installation. Blowers are sized to deliver design air quantity both efficiently and quietly. The direct-drive, multi-speed blower motors provide a selection of air quantities to match any application. ll models include a one-minute blower off delay as standard to enhance system efficiency ratings. The durable, pre-painted steel protects the unit against rust and corrosion. ll models have 1 inch foil face fiber glass insulation, providing a thermal insulation value of R-4.2. OILS - Staggered rows of rifled copper tubes are mechanically expanded into enhanced surface aluminum fins to provide high heat transfer and long-lasting quality. The M multi-position coils may be used for upflow, downflow, and horizontal left or right applications. oil cabinets are insulated with 3/4" foil face insulation to prevent sweating. ELETRI HETERS - Both single and three phase electric heater models are available to match any requirement. ll heaters include nickel-chromium elements with a 5-year limited warranty on 1 Ø heating elements and 1 year limited warranty on 3 Ø heating elements. Sequential operation is provided to control heaters in all models. ircuit breakers are used in 208/230 volt, single-phase heaters of 15 KW and larger. equipped with circuit breakers may be altered in the field to use multi-source power supply. Over-temperature limit switches provide protection from airflow loss with fusible link backup protection. ESSORIES - full line of matching accessories available for use with the blower and coils to allow any type application. LIMITTIONS - These units must be wired and installed in accordance with all national and local safety codes. Voltage limits are as follows: BLOWER VOLTGE VOLTGE ODE NORL OPERTING VOLTGE RNGE* 208/ * Rated in accordance with RI Standard 110, utilization range. ir flow must be within the minimum and maximum limits approved for electric heat, evaporator coils and outdoor units. FOR DISTRIBUTION USE ONLY - NOT TO BE USED T POINT OF RETIL SLE
2 DIMENSIONS - (BLOWER WITH M OILS) NOTE: Power wiring may be brought into the unit through one of the knockouts in either the top or the left side panel. Multiple knockouts are provided to accommodate all of the electric heat and transformer accessories that are available. Use the knockouts that provide the best wire routing for the accessory being used. 10-3/8 E IR HNDLER TOP (ll ) 10-3/8 E J IR HNDLER K (TOTL HEIGHT) D 20-1/2 E 20-3/8 IR HNDLER BOTTOM OPENING OIL M B 22 D 20-1/4 OIL BOTTOM OPENING DIMENSIONS Dimensions Wiring K.O. s 1 onnections Refrigerant B J K Line Size D E Height Width Total Height Power ontrol Liquid Vapor 08B /2 16-1/2 14-1/2 7/8 (1/2), 1-3/8(1) 12B /2 16-1/2 14-1/2 7/8 (1/2), 1-3/8(1) 14D /2 23-1/2 21-1/2 7/8 (1/2), 1-3/8(1) 7/8 (1/2) /32, (1-1/4) 20D /2 23-1/2 21-1/2 1-31/32, (1-1/2) M24B**H /2 16-1/2 16-3/8 M30B**H /2 16-1/2 16-3/8 48 or 53 M35B**H /2 Depending 16-1/2 16-3/8 M35**H 26-1/2 21 on combination /8 M36B**H /2 16-1/2 16-3/8 M36**H /8 M42B**H /2 16-1/2 16-3/8 M42**H /8 M48**H /8- M48D**H /2 23-1/2 23-3/8 M60D**H /2 23-1/2 23-3/8 M61D**H / /2 23-3/8 1. Parenthesis indicate conduit size. 2. May be either 208/ or ** -, 2 indicates TXV, 3X indicates TXV must be field supplied. See Outdoor Unit. H models are available with a factory installed horizontal drain pan. 3/8 3/4 7/8 2 Unitary Products Group
3 OOLING PITY - OIL ONLY Blower 08B 12B 14D 16 20D oil Rated FM Entering ir F (Dry / Wet Bulb) Evaporator Temperature and orresponding Pressure F / PSIG 35 / / / / 84.0 Multi-Position - Upflow / Downflow / Horizontal 85 / M18B**H / / / / M24B**H / / / / M30B**H / / / / M36B**H / / / / M48D**H / / / / M60D**H / / / / M61D**H / / / / M42**H / / / / M48**H / / / / M48D**H / / / / M60D**H / / / / M61D**H / / / Unitary Products Group 3
4 PHYSIL & ELETRIL DT 08B21 12B21 12B41 14D21 Blower - Diameter x Width 10 x 9 10 x 9 10 x 9 10 x 10 Motor HP 1/4 HP 3/4 HP 3/4 HP 1/2 HP Nominal RPM Voltage 208 / / / 230 mps Full Load Type DISPOSBLE OR PERNENT Filter Size 16 x 20 x 1 16 x 20 x 1 16 x 20 x 1 22 x 20 x 1 Permanent Type Kit 1PF0601BK 1PF0601BK 1PF0601BK 1PF0603BK Filter Rack 1FR0717 1FR0717 1FR0717 1FR0724 Shipping / Operating Weight (lbs.) 128 / / / / D21 20D41 Blower - Diameter x Width 10 x x x x 10 Motor HP 1 HP 1 HP 1 HP 1 HP Nominal RPM Voltage 208 / / mps Full Load Filter 1 Size 20 x 20 x 1 20 x 20 x 1 22 x 20 x 1 22 x 20 x 1 Type DISPOSBLE OR PERNENT Permanent Type Kit 1PF0602BK 1PF0602BK 1PF0603BK 1PF0603BK Filter Rack 1FR0721 1FR0721 1FR0724 1FR0724 Shipping / Operating Weight (lbs.) 139 / / / / Field Supplied. OILS M Model M183XH1 M18H1 M18B3XH1 M18BH1 M243XH1 M24H1 M24B3XH1 M24BH1 M303XH1 M30H1 M30B3XH1 M30BH1 M35B3XH1 M353XH1 M363XH1 M36H1 M36B3XH1 M36BH1 M363XH1 M36H1 M42B3XH1 M42B2H1 M423XH1 M422H1 M483XH1 M482H1 M48D3XH1 M48D2H1 M60D3XH1 M60D2H1 M61D3XH1 M61D2H1 pplication ooling / Heat Pump Refrig. onn. Types Sweat Face rea (Sq. Ft.) Rows Deep Fin Per In. oil Size (2) 14 x (2) 14 x (2) 18 x (2) 18 x (2) 18 x (2) 18 x (2) 16 x (2) 20 x (2) 20 x (2) 20 x (2) 24 x (2) 24 x (2) 22 x (2) 22 x (2) 24 x (2) 28 x 17.5 Tube Geometry Tube Dia. Fin Type 1 x /8 Enhanced TXV Operating Weight (Lbs.) Unitary Products Group
5 ELETRIL DT - 208/ Heater * * May be 0 (no breaker) or 1 (with breaker) BTG-D-0806 X. STTI & Total Heat 1 KW Staging MIN. FM KW MBH W1 Only W2 Only W1 + W2 Static Tap 208V 240V 208V 240V 208V 240V 208V 240V 208V 240V 4HK* Lo BN2 4HK* Lo HK* Med HK* Hi HK* Lo BN2 4HK* Med HK* Med HK165N Med HK* Lo HK* Lo DN2 4HK* Med HK Med HK Hi HK Hi HK* Lo HK* Lo N2 4HK* Med HK Med HK Hi HK Hi HK* Lo HK* Lo DN2 4HK Med HK Med HK Med HK Med See conversion Page 7. ELETRIL DT - 208/ Min. Total Heat 1 KW Staging Heat Kit - Max. Speed Three Phase Static KW MBH W1 Only W2 Only W1 + W2 Tap 208V 240V 208V 240V 208V 240V 208V 240V 208V 240V 08BN2 4HK Hi BN2 4HK Med HK Med DN2 4HK Med HK Hi HK Med N2 4HK Med HK Hi HK Lo D 4HK Med HK Med See conversion Page 7. ELETRIL DT Total Heat1 KW Staging Heater X. STTI & MIN. FM KW MBH W1 Only W2 Only W1 + W2 Static Taps 480V 480V 480V 480V 480V 12BN41 4HK Med N41 4HK Med HK Med HK Med DN41 4HK Med HK Med Unitary Products Group 5
6 ELETRIL DT (FOR SINGLE SOURE SUPPLY) - OPPER WIRE 208/ Heater * Field Wiring Heater mps mpacity Min. ircuit Max. O..P. 1 mps/type Wire Size - WG V 208V 240V 208V 240V 208V 240V 4HK* B 4HK* HK* HK* HK* B 4HK* HK* HK165N HK* HK* D 4HK* HK HK HK HK* HK* HK* HK HK HK HK* HK* D 4HK HK HK HK /0 1. OP = Over urrent Protection device, must be HR type ircuit Breaker or Time Delay fuse. * May be 0 (no breaker) or 1 (with breaker). ELETRIL DT (FOR SINGLE SOURE SUPPLY) - OPPER WIRE 208/ Field Wiring Heater Heat Kit - mps Min. ircuit mpacity Three Phase Max. O..P. 1 mps/type 75 Wire Size - WG 240V 208V 240V 208V 240V 208V 240V 08B 4HK B 4HK HK D 4HK HK HK HK HK D 4HK HK O..P. = Over urrent Protection device, must be HR type ircuit Breaker or Time Delay fuse. 2. Heaters are 3 Phase. ELETRIL DT (FOR SINGLE SOURE SUPPLY) - OPPER WIRE Field Wiring Heater Min. ircuit mpacity Max. O..P. 1 mps/type Wire Size - WG V 480V 480V 12BN41 4HK N41 4HK HK HK DN41 4HK HK OP = Over urrent Protection device, must be HR type ircuit Breaker or Time Delay fuse. 6 Unitary Products Group
7 ELETRIL DT (FOR MULTI SOURE SUPPLY) - OPPER WIRE 208/ Min. ircuit mpacity Max. O..P. 1 mps/type 75 Wire Size - WG Heater ircuit ircuit ircuit 1st 2nd 3rd 1st 2nd 3rd 1st 2nd 3rd 208 / / / / / / / / / BN2 4HK / / / / 25 8 / 6 10 / 10 16N2 14DN2 20DN2 4HK / / / / 25 8 / 6 10 / 10 4HK / / / / 50 8 / 6 8 / 8 4HK / / / / 50 8 / 6 8 / 8 4HK / / / / 25 8 / 6 10 / 10 4HK / / 45./ 45 / / 50 8 / 8 8 / 8 4HK / / / / 50 8 / 6 8 / 8 4HK / / / / 25 8 / 6 10 / 10 4HK / / / / 50 8 / 6 8 / 8 4HK / / / / 50 8 / 6 8 / 8 4HK / / / / / / 25 8 / 6 8 / 8 10 / OP = Over urrent Protection device, must be HR type ircuit Breaker or Time Delay fuse. ELETRIL DT (FOR MULTI SOURE SUPPLY) - OPPER WIRE 208/ Minimum ircuit mpacity Max OP 1 mps/type 75 Wire Size - WG Heater ircuit Model 1st 2nd 3rd 1st 2nd 3rd 1st 2nd 3rd 208/ / / / / / / / /240 20DN2 4HK / / / - 40 / / 40 - / - 8 / 8 8 / 8 - / - 1. OP = Over urrent Protection device, must be HR type ircuit Breaker or Time Delay fuse. KW & MBH ONVERSIONS 208-VOLT 240-VOLT.751 FOR 230-VOLT OPERTION MULTIPLY 240-VOLT TBULTED KW & MBH BY VOLT 240-VOLT.840 ELETRIL DT - OOLING ONLY (60 Hz) - 208/230 - (OPPER WIRE) Total Motor mps Minimum ircuit mpacity Max. O..P. 1 Minimum Wire 60 Hertz 60 Hertz mps/type Size.W.G. 208V 230V 208V 230V 08BN BN DN N DN OP = Over urrent Protection device, must be HR type ircuit Breaker or Time Delay fuse. ELETRIL DT - OOLING ONLY (60 Hz) (OPPER WIRE) Total Motor mps Minimum ircuit mpacity Max. O..P. 1 Minimum Wire Size.W.G. 60 Hertz 60 Hertz mps/type 12BN N DN OP = Over urrent Protection device, must be HR type ircuit Breaker or Time Delay fuse. Unitary Products Group 7
8 WIRING TYPIL WIRING WITHOUT ELETRI HET SUPPLY 1 PHSE ELETRI HET WITH IRUIT BREKER & BREKER BR REMOVED MULTI-SOURE (15-25 KW) - 25 KW SHOWN SUPPLY 1 SUPPLY 2 SUPPLY 3 YBE1,2,OR3 IRUIT BREKERS Line Power onnections SUPPLY SUPPLY ELETRI HET WITHOUT IRUIT BREKER 3 PHSE (10-15 KW) ELETRI HET WITHOUT IRUIT BREKER SINGLE SOURE ( KW) ONNET LEDS WITH WIRE NUTS (TYPIL LL HET KITS) TERMINL BLOK TERMINL BLOK SUPPLY 1 PHSE ELETRI HET WITH IRUIT BREKER S SHIPPED FROM FTORY SINGLE SOURE (2.5-25KW)-25KWSHOWN (JUMPER BR) YBE1,2,OR3 IRUIT BREKERS WIRING (208/ ) NOTE: USE ONLY OPPER ONDUTOR 3 PHSE ELETRI HET WITH IRUIT BREKER MULTI-SOURE - 25 KW ELETRI HET WITHOUT IRUIT BREKER 3 PHSE (10-15 KW) SUPPLY 1 SUPPLY 2 460V - Line Power onnections (2) 3-PHSE BREKERS ONNET TRNSFORMER LEDS WITH WIRE NUTS SUPPLY TERMINL BLOK ESSORIES Refer to Price Manual for specific model numbers. Electric Heaters - shown under Electrical Data include sequencers and temperature limit switches and fusible links for safe, efficient operation. ircuit breakers are provided where shown. Suspension Kit - Suspension Kit Model 1BH0601 is designed specifically for upflow application of the units contained in this technical guide. For suspension of these units in horizontal applications, it is recommended to use angle support brackets with threaded rods at locations shown in air handler installation instructions. Filter Rack - One of the following external filter rack accessories; 1FR0717, 1FR0721, 1FR0724 must be used when unit is installed in a downflow application. ombustible Floor Base - If an electric heat accessory which is rated for greater than zero clearance to combustible surfaces is installed in these air handlers in the downflow operating positions on a combustible floor, one of the following combustible floor base accessories is required: 1FB1817, 1FB1821, or 1FB Unitary Products Group
9 1/2 3/4 1/2 D 1-1/2 2 Max Thick Filter 1 3-1/2 19-7/8 B 3-1/2 7/8 1/2 NOTE: May be used with up to a 2 filter. Required for downflow application. May also be used in upflow application. ll dimensions are inches. They are subject to change without notice. ertified dimensions will be provided upon request ESSORY FOOTPRINT 16-1/ /2 1/2 (ll four sides) FILTER RK ESSORY Filter Rack Rack Dimensions Inches Filter Dimensions Inches Used With B D Width Length Thickness 1FR B, 12B 17-1/2 16-3/8 15-1/ / FR / FR D, 20D 24-1/2 23-3/8 22-1/ / IR HNDLER DEPTH FRONT DOWNFLOW IR HNDLER B WRM IR PLENUM WITH 1 FLNGES FIBERGLSS INSULTION /64 PLENUM 12-1/2 FLOOR OPENING FLOOR PPROX. 1/2 LERNE LL ROUND B FIBERGLSS TPE UNDER FLNGE FLOOR IR HNDLER WIDTH OMBUSTIBLE FLOOR BSE OMBUSTIBLE FLOOR BSE ESSORY ll dimensions are in inches. They are subject to change without notice. ertified dimensions will be provided upon request. B PLENUM 1 PPROX. 1/2 LERNE LL ROUND FLOOR OPENING 1 OMBUSTIBLE FLOOR BSE ESSORY Floor Base Used with Dimensions B D 1FB B, 12B FB FB D, 20D Unitary Products Group 9
10 NOTE: ir flow data shown above 0.50 W.. external static pressure is for REFERENE ONLY. Maximum allowable external static when electric heat is used is limited to 0.50 W.. Maximum allowable external static pressure may also be limited by minimum FM requirements for proper Heat Pump operation. EXTENDED IRFLOW DT 1 - MODELS 08B 12B 14D 16 20D M M18B**H M24B**H M30B**H M36B**H M48D**H M60D**H M61D**H M42**H M48**H M48D**H M60D**H M61D**H 1. Includes Return ir Filter and Largest Electric Heater. 230 / 460 Volt - 60 Hz Blower Motor Speed FM External Static Pressure - IW High Med N/ Low N/ N/ High Med Low N/ N/ High Med Low High N/ Med N/ Low N/ High Med Low High N/ Med N/ Low N/ High Med Low High Med Low High Med Low High Med Low N/ N/ N/ High Med Low High Med Low ll H, V,, MV, SHP, SV series air handler units are UL Listed up to 0.50" w.c. external static pressure, including air filter, wet coil, and largest KW size heater. YEL FTORY WIRED TO TRNSFORMER FTORY WIRED TO FN MOTOR RELY TERMINL ON ONTROL BORD 230 VOLT BLOWER MOTOR P BRN HIGH MED LOW PUR PUR 460 VOLT BLOWER MOTOR L2 PUR ORG TPE END & P WITH WIRE NUT HIGH MED LOW BRN HIGH L1 ORG HIGH MED LOW 460 VOLT BLOWER MOTOR L2 MEDIUM PUR BRN L1 460 VOLT BLOWER MOTOR L2 460 VOLT BLOWER MOTOR PUR HIGH MED LOW BRN LOW ORG L1 Blower Speed onnections 460V - Blower Speed onnections 10 Unitary Products Group
11 NOTE: ir flow data shown above 0.50 W.. external static pressure is for REFERENE ONLY. Maximum allowable external static when electric heat is used is limited to 0.50 W.. Maximum allowable external static pressure may also be limited by minimum FM requirements for proper Heat Pump operation. EXTENDED IRFLOW DT 1 - MODELS 08B 12B 14D 16 20D M M18B**H M24B**H M30B**H M36B**H M48D**H M60D**H M61D**H M42**H M48**H M48D**H M60D**H M61D**H 208 Volt - 60 Hz Blower Motor Speed FM External Static Pressure - IW High Med N/ Low N/ N/ N/ High Med N/ Low N/ N/ High N/ Med N/ Low N/ High N/ Med N/ Low N/ High Med Low High Med Low High Med Low High Med Low High Med Low High Med Low N/ N/ High Med Low High Med Low N/ N/ N/ Includes Return ir Filter and Largest Electric Heater. ll H, V,, MV, SHP, SV series air handler units are UL Listed up to 0.50" w.c. external static pressure, including air filter, wet coil, and largest KW size heater. PPLITION FTORS - RTED FM VS. TUL FM % OF RTED IR FLOW 80% 90% RTED FM 110% 120% PITY FTOR Unitary Products Group 11
12 Horizontal Right Up Flow Down Flow Horizontal Left Typical pplications with M Multi-Position oils THERMOSTT R SERIES - ir Handler ontrol Wiring Typical / - ooling only pplications IR HNDLER BORD R 1-STGE IR ONDITIONING THERMOSTT R SERIES - ir Handler ontrol Wiring Typical / with Electric Heat pplications IR HNDLER BORD R 1-STGE IR ONDITIONING G G G G Y Y/Y2 Y Y Y/Y2 Y W1 Y1 Y1 W2 W2 W2 W2 W1 HUMIDISTT * W1 W1 HUMIDISTT * O O HUM HUM X/L X/L OM OM OOLING MODELS WITH ELETRI HET THERMOSTT ONTROL WIRING - Series - ir Handler & New UPG HP Systems Two Stage H/P with York Guard VI Board & opeland Ultra Tech onventional pplication - Not Hot Heat Pump IR HNDLER BORD 2 - STGE SROLL HET PUMP R R R G G Y2 Y2 Y1 E W O Y/Y2 Y1 W2 W1 O HUM HUMIDISTT * Y2 OUT X/L X/L X/L OM Y1 W2 OUT W1 OUT W O BS ONTROL WIRING - SERIES Subject to change without notice. Printed in U.S BTG-D-0806 opyright by Unitary Products Group ll rights reserved. Supersedes: BTG Unitary 5005 Norman Products York OK Group Drive 73069
TECHNICAL GUIDE MODELS: MV MODULAR VARIABLE SPEED AIR HANDLERS FOR USE WITH SPLIT SYSTEM COOLING & HEAT PUMP DESCRIPTION FEATURES
TEHNIL GUIDE MODELS: MV MODULR VRIBLE SPEED IR HNDLERS FOR USE WITH SPLIT SYSTEM OOLING & HET PUMP 1200-2000 FM BLOWERS 3-5 TON OILS OPTIONL 1 & 3 ELETRI HETERS Due to continuous product improvement, specifications
More informationTECHNICAL GUIDE SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS DESCRIPTION MODELS: AHP18 THRU 60 AND SHP48 THRU 60 FEATURES
TEHNIAL GUIDE SINGLE PIEE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM OOLING & HEAT PUMPS MODELS: AHP18 THRU 60 AND SHP48 THRU 60 DESRIPTION This fan coil line offers the ultimate in application flexibility.
More informationTECHNICAL GUIDE SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS DESCRIPTION FEATURES MODELS: AHX SERIES YTG-A-0409
TEHNIAL UIDE SINLE PIEE AIR HANDLERS FR USE WITH SPLIT-SYSTEM LIN & HEAT PUMPS MDELS: AHX SERIES DESRIPTIN This air handler line offers the ultimate in application flexibility. The AHX (high efficiency
More informationDESCRIPTION FEATURES
TECHNICAL GUIDE MODELS: N*AH Modular Air Handlers For use w / Split System Cooling & Heat Pump 600-2000 CFM Blowers 2-5 Ton Coils Optional 1 & 3 Electric Heaters DESCRIPTION This unique modular system
More informationTECHNICAL GUIDE SINGLE PIECE STANDARD ECM AIR HANDLERS. DESCRIPTION
TECHNICAL GUIDE SINGLE PIECE STANDARD ECM AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: AHE18 THRU 60* DESCRIPTION The Air Handler line offers the ultimate in comfort, sound and application
More informationTECHNICAL GUIDE SINGLE PIECE STANDARD ECM AIR HANDLERS. DESCRIPTION FEATURE
TECHNICAL GUIDE SINGLE PIECE STANDARD ECM AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: AHE18 THRU 60* DESCRIPTION The Air Handler line offers the ultimate in comfort, sound and application
More informationTECHNICAL GUIDE SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS DESCRIPTION FEATURES MODELS: AHR18 THRU 60* WARRANTY
TECHNICAL GUIDE SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: AHR18 THRU 60* DESCRIPTION This fan coil line offers the ultimate in application flexibility. The AHR (non-variable
More informationTECHNICAL GUIDE SINGLE PIECE VARIABLE SPEED AIR HANDLERS. DESCRIPTION FEATURE
TEHNIAL UIDE SINLE PIEE VARIABLE SPEED AIR HANDLERS FR USE WITH SPLIT-SYSTEM LIN & HEAT PUMPS MDELS: AHE18 THRU 60* DESRIPTIN The Air Handler line offers the ultimate in comfort, sound and application
More informationTECHNICAL GUIDE SINGLE PIECE AIR HANDLERS DESCRIPTION FEATURES YTG-A-0806
TECHNICAL GUIDE SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS HEAT PUMP MODELS: F2RP/F2FP018 THRU 060 F3RP/F3FP018 THRU 060(T) FXRP024 THRU 060 COOLING MODELS F2RC/F2FC024 THRU
More informationSTELLAR 2000 SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING
(598) STELLAR 2000 SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING HEAT PUMP S: F2RP / F2FP018 THRU 060 COOLING S: F2RC / F2FC018 THRU 036 VARIABLE SPEED : F2FV060 DESCRIPTION This fan coil
More informationTECHNICAL GUIDE. COOLING & HEAT PUMP MODELS: F2RP024 THRU Hz SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS
036-21624-001 ev. A (1104) TECHNICAL GUIDE COOLING & HEAT PUMP S: F2P024 THU 060 50 Hz SINGLE PIECE AI HANDLES FO USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS Due to continuous product improvement, specifications
More informationCB29M. Multi Position 60 HZ A I R H A N D L E R S. 3 to 5 Tons Optional Electric Heat 5 to 30 kw CB 29 M 41 1 E N G I N E E R I N G D A T A
E N G I N E E R I N G D T I R H N D L E R S CB29M Multi Position 60 HZ Bulletin No. 210478 November 2008 Supersedes July 2007 3 to 5 Tons Optional Electric Heat 5 to 30 kw MODEL NUMBER IDENTIFICTION CB
More information12 SEER CENTRAL AIR CONDITIONING TON
12 SEER ENTRL IR ONDITIONING 1.5-5 TON QULITY FETURES Efficient scroll compressors Full metal louvered coil protection Quiet, top air discharge Galvanized steel cabinet with corrosion resistant powder
More informationTECHNICAL GUIDE ADD - ON COILS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: GHD, GFD, GFA, GNA, GUA & GHA CFM 2-5 TON COILS
Heating TECHNICAL GUIDE Air Conditioning ADD - ON COILS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: GHD, GFD, GFA, GNA, GUA & GHA 600-2000 CFM 2-5 TON COILS R DESCRIPTION These cooling and heat
More informationU L OIL-FIRED FURNACES. Stellar MBH OUTPUT 80 AFUE DESCRIPTION FEATURES MULTI-POSITION MODELS - P1FM DOWNFLOW/HORIZONTAL MODELS - P1FH
660.06-TGY (795) MULTI-POSITION S - PFM Stellar 2000 OIL-FIRED FURNES 55-200 MH OUTPUT 80 FUE U L DOWN/HORIZONTL S - PFH DESRIPTION These oil-fired furnaces are compact, decorator-styled warm air heating
More informationK*ES120 DESCRIPTION TECHNICAL GUIDE SPLIT-SYSTEM EVAPORATOR BLOWERS 10 NOMINAL TONS EER 8.5 ACCESSORIES FIELD INSTALLED TABLE 1: ARI RATINGS*
TECHNICL GUIDE SPLIT-SYSTEM EVPORTOR LOWERS K*ES120 10 NOMINL TONS EER 8.5 DESCRIPTION These completely assembled dual circuit evaporator blower units include a well-insulated cabinet, a DX cooling coil
More informationTECHNICAL GUIDE ADD - ON COILS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: CF, CM, CU 600-2000 CFM 1.5-5 TON COILS 5005744-BTG-C-0815 DESCRIPTION These indoor coils are designed to be installed
More informationSPLIT-SYSTEM EVAPORATOR BLOWER DESCRIPTION ACCESSORIES EER 8.5 ARI RATINGS* K2ES120A25 10 NOMINAL TONS WITH TWO 5 TON CIRCUITS
550.13-TG11Y (0500) SPLIT-SYSTEM EVAPORATOR BLOWER K2ES120A25 10 NOMINAL TONS WITH TWO 5 TON CIRCUITS EER 8.5 DESCRIPTION This completely assembled dual circuit evaporator blower includes a well-insulated
More informationDESCRIPTION ACCESSORIES FIELD INSTALLED SPLIT-SYSTEM EVAPORATOR BLOWERS KBBU060, KDBC090, KCBC120 & KCBC180 5 THRU 15 NOMINAL TONS SUPPLY AIR PLENUMS
DESCRIPTION TECHNICAL GUIDE SPLIT-SYSTEM EVAPORATOR BLOWERS KBBU060, KDBC090, KCBC120 & KCBC180 5 THRU 15 NOMINAL TONS These completely assembled units include a well-insulated cabinet, a DX cooling coil
More informationTECHNICAL GUIDE ADD - ON COILS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS DESCRIPTION MODELS: MC, PC, FC, HD, UC CFM 1.
Heating TECHNICAL GUIDE Air Conditioning ADD - ON COILS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: MC, PC, FC, HD, UC 600-2000 CFM 1.5-5 TON COILS R DESCRIPTION These cooling and heat pump
More informationRheem High Efficiency Air Handler
Air Handlers Rheem High Efficiency Air Handler Constant Torque Motor (ECM) Efficiencies up to 14 SEER The RH1T feature a Constant Torque motor (ECM) and a piston refrigerant control for efficient and reliable
More informationFORM NO. HSC-543 AIR HANDLERS
FORM NO. HSC- AIR HANDLERS AH10X1 High Efficiency featuring New Industry Standard R-10A Refrigerant Features AH10X1 features the new X-1 (ECM) motor which provides enhanced SEER performance with most Sure
More informationELECTRIC HEAT AIR HANDLERS
ELECTRIC HEAT AIR HANDLERS 208/230V 1 1 /2 to 5 TONS High efficiency series for R-22 Certain models feature GE s new X-13 motor for enhanced SEER performance with most outdoor condensing units Multi-position
More informationAIR HANDLERS RBHC- SERIES HEAT PUMP AIR HANDLERS AND FAN COIL UNIT
FORM NO. H11-517 REV. 1 Supersedes Form No. H11-509 Rev. 7 AIR HANDLERS RBHC- SERIES HEAT PUMP AIR HANDLERS AND FAN COIL UNIT Features 1 1 /2 ton [5.3 kw] through 5 ton [17.6 kw] models are always just
More informationAIR HANDLERS AIR HANDLERS. RHPN- SERIES 18 SEER featuring Earth-Friendly R-410A Refrigerant. Features
FORM NO. H11-528 Supersedes Form No. H11-526 Rev. 1 AIR HANDLERS AIR HANDLERS RHPN- SERIES 18 SEER featuring Earth-Friendly R-410A Refrigerant Features earth friendly refrigerant Includes an energy efficient
More informationModular Variable Speed Air Handlers
Modular Variable Speed Air Handlers Convertible Variable Speed Communicating Air Handlers - 1 1/2-5 Ton 4TEE3C01A1000A 4TEE3C02A1000A 4TEE3C03A1000A 4TEE3C04A1000A 4TEE3C05A1000A 4TEE3C06A1000A 4TEE3C07A1000A
More informationProduct Data 58GFA. Induced-Combustion Upflow Furnace Heating Inputs: 65,000 thru 150,000 Btuh. 78% AFUE With Continuous- Pilot Ignition
Product Data 58GF Induced-ombustion Upflow Furnace Heating Inputs: 65,000 thru 150,000 Btuh 78% FUE With ontinuous- Pilot Ignition arrier is the first manufacturer to provide a 78% nnnual Fuel Utilization
More informationDESCRIPTION FEATURES HORIZONTAL DUCT HD. ISO 9001 Certified Quality Management System
TECHNICAL GUIDE ADD - ON COILS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: MC, PC, FC, HD, UC 600-2000 CFM 1.5-5 TON COILS UPFLOW/DOWNFLOW FULL CASED FC UPFLOW PARTIAL CASED PC UPFLOW UNCASED
More informationDESCRIPTION FEATURES HORIZONTAL DUCT HD. ISO 9001 Certified Quality Management System
Heating TECHNICAL GUIDE ADD - ON COILS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: MC, PC, FC, HD, UC 600-2000 CFM 1.5-5 TON COILS UPFLOW/DOWNFLOW FULL CASED FC UPFLOW PARTIAL CASED PC Air Conditioning
More informationSUBMITTAL DATA SHEET FEATURES. SPLIT-SYSTEM EVAPORATOR BLOWERS 7.5, 10, 15, 20 & 25 TONS MODELS: J07 thru 25NC, 2-PIPE J10 thru 20ND, 4-PIPE
SUBMITTAL DATA SHEET SPLIT-SYSTEM EVAPORATOR BLOWERS 7.5, 10, 15, 20 & 25 TONS MODELS: J07 thru 25NC, 2-PIPE J10 thru 20ND, 4-PIPE JOB NAME: LOCATION: PURCHASER: ORDER NO: ENGINEER: SUBMITTED TO: FOR:
More informationELITE SERIES R-410A Ready - Multi-Position
PRODUCT SPECIFICATIONS AIR HANDLERS CBXM ELITE SERIES R-0A Ready - Multi-Position Bulletin No. 0 October 07 Supersedes June 0 Nominal Capacity -. to Tons Optional Electric Heat -. to 0 kw MODEL NUMBER
More informationRuud High Efficiency Air Handler
Air Handlers Ruud High Efficiency Air Handler RHLL- Series X-1 (ECM) Efficiencies up to 16 SEER RHLL feature an X-1 (ECM) motor which provides enhanced SEER performance with most Ruud outdoor units. Versatile
More informationDCH Commercial Contents Standard Features Cabinet Features
DH ommercial 7½ - ½ Ton Packaged Heat Pump Up to. EER &. OP ooling apacity: 90,000 0,000 BTU/h Heating apacity: 90,000,000 BTU/h ontents Nomenclature... Product Specifications... Expanded ooling Data...8
More informationRheem High Efficiency Air Handler
Air Handlers Rheem High Efficiency Air Handler /RHT- Series Constant Torque (ECM) Efficiencies up to 16 SEER /RHT feature a Constant Torque motor (ECM) which provides enhanced SEER performance with most
More informationAIR HANDLERS RBHK- SERIES HEAT PUMP AIR HANDLERS AND FAN COIL UNIT
FORM NO. H11-516 REV. 1 Supersedes Form No. H11-516 Rev. 0 AIR HANDLERS RBHK- SERIES HEAT PUMP AIR HANDLERS AND FAN COIL UNIT Features Versatile 4-way convertible design for upflow, downflow, horizontal
More informationTECHNICAL GUIDE 80 AFUE MULTI-POSITION GAS FURNACES MODELS: G8C SERIES 4-POSITION MBH INPUT 3-POSITION 150 MBH INPUT DESCRIPTION WARRANTY
TEHNIAL GUIE 80 AFUE MULTI-POSITION GAS FURNAES MOELS: G8 SERIES 4-POSITION 50-125 MH INPUT 3-POSITION 150 MH INPUT EFFIIENY RATING ERTIFIE ISO 9001 ertified Quality Management System ESRIPTION These compact
More informationDTC Commercial. 3-5 Tons Packaged Air Conditioner Up to 15.5 SEER / Up to 13.0 EER. Cooling Capacity: 35,600 60,000 BTU/h
DT ommercial 3-5 Tons Packaged Air onditioner Up to 15.5 SEER / Up to 13.0 EER ooling apacity: 35,600 60,000 BTU/h ontents Nomenclature...2 Product Specifications...4 Expanded ooling Data...6 Airflow Data...18
More informationRheem Air Handlers. RHLP- Standard Efficiency X-13 (ECM) Motor
Air Handlers Rheem Air Handlers RHLP- Standard Efficiency X-13 (ECM) Motor RHLP features an X-13 (ECM) motor which provides enhanced SEER performance with most Rheem outdoor units. 1 1 /2 ton [.3 kw] through
More informationDP15CH. Packaged Air Conditioner UP TO 15 SEER 2 to 5 Tons. Cooling Capacity: 23,600-57,500 BTU/h
DP15H ooling apacity: 23,600-57,500 BTU/h Packaged Air onditioner UP TO 15 SEER 2 to 5 Tons ontents Nomenclature...2 Product Specifications...3 Expanded ooling Data...4 Airflow Data...16 Heater Kit Data...17
More informationAIR HANDLERS AIR HANDLERS. UHKA- SERIES featuring R-22 Refrigerant UHKL- SERIES featuring Earth-Friendly R-410A Refrigerant.
FORM NO. H22-523 REV. 4 Supersedes Form No. H22-523 Rev. 3 AIR HANDLERS AIR HANDLERS UHKA- SERIES featuring R-22 Refrigerant UHKL- SERIES featuring Earth-Friendly R-410A Refrigerant Features earth friendly
More informationA I R H A N D L E R S CB26UH-R. MERIT Series R-22 - Upflow / Horizontal P R O D U C T S P E C I F I C AT I O N S
P R O D U C T S P E C I F I C AT I O N S A I R H A N D L E R S CB6UH-R MERIT Series R- - Upflow / Horizontal Bulletin No. 1067 April 01 Supersedes January 01 Nominal Capacity - 1.5 to 5 Tons Optional Electric
More informationCPG Commercial. 7½- to 12½-Ton Self-Contained Packaged 80% AFUE. Cooling Capacity: 90, ,000 BTU/h. Gas/Electric Units. up to 11.
PG ommercial ooling apacity: 90,000 8,000 BTU/h Heating apacity: 68,000 BTU/h Three-Phase 7½- to 2½-Ton Self-ontained Packaged Gas/Electric Units up to.5 EER 80% AFUE Standard Features R-40A chlorine-free
More informationDSC Commercial. 3-5 Ton Packaged Air Conditioner 14 SEER / Up to 12.0 EER. Cooling Capacity: 35,000 58,000 BTU/h
DS ommercial 3-5 Ton Packaged Air onditioner 4 SEE / Up to.0 EE ooling apacity: 35,000 58,000 BTU/h ontents Nomenclature... Product Specifications... 4 Expanded ooling Data... 7 Airflow Data... 3 rankercase
More informationHEAT PUMP AIR HANDLERS AND FAN COIL UNIT
FORM NO. H66-515 Supersedes Form No. H66-5 Rev. 1 HEAT PUMP AIR HANDLERS AND FAN COIL UNIT Features 1 1 /2 ton [5 kw] through 5 ton [18 kw] models are always just 35 inches [889 mm] tall and 22 inches
More informationTECHNICAL GUIDE LISTED TECHNICAL GUIDE SPLIT-SYSTEM AIR CONDITIONERS 13 SEER R-410A 3 PHASE MODELS: TCGD30 THRU 60 (2.5 THRU 5 NOMINAL TONS)
TECHNICAL GUIDE TECHNICAL GUIDE SPLIT-SYSTEM AIR CONDITIONERS 13 SEER R-410A 3 PHASE S: TCGD30 THRU 60 (2.5 THRU 5 NOMINAL TONS) LISTED Due to continuous product improvement, specifications are subject
More informationUARDIAN TECHNICAL GUIDE MODELS: GCGD18 THRU 60
TECHNICAL GUIDE GUARDIAN SERIES DRY SHIP AIR CONDITIONER CONDENSING UNITS SHIPPED WITH NITROGEN CHARGE ONLY 13 SEER R-22 1 PHASE 1.5 THRU 5 NOMINAL TONS MODELS: GCGD18 THRU 60 UARDIAN Due to continuous
More informationDCC Commercial. 7½ - 12½ Ton Packaged Air Conditioners Up to 11.3 EER. Cooling Capacity: 88, ,000 BTU/h
D ommercial 7½ - ½ Ton Packaged Air onditioners Up to. EER ooling apacity: 88,000,000 BTU/h ontents Nomenclature... Product Specifications... Expanded ooling Data...8 Airflow Data... rankcase Heater...0
More informationDSC Commercial. 3-5 Ton Packaged Air Conditioner 14 SEER / Up to 12.0 EER. Cooling Capacity: 35,000 58,000 BTU/h
DS ommercial - 5 Ton Packaged Air onditioner 4 SEE / Up to.0 EE ooling apacity: 5,000 58,000 BTU/h ontents Nomenclature... Product Specifications... 4 Expanded ooling Data... 7 Airflow Data... rankercase
More informationAIR HANDLERS UBHN- SERIES AIR HANDLERS AND FAN COIL UNIT PRELIMINARY NOT FOR DISTRIBUTION
FORM NO. H22-522 AIR HANDLERS earth friendly refrigerant PRELIMINARY NOT FOR DISTRIBUTION UBHN- SERIES AIR HANDLERS AND FAN COIL UNIT Features Versatile 3-way convertible design for upflow, horizontal
More informationHigh-quality UV-resistant powder-paint finish aluminized steel tubular heat exchanger
GPG14M ooling apacity: 23,000 to 57,500 BTU/h Heating apacity: 40,000 to 120,000 BTU/h Packaged Gas / Electric Units 2 to 5 Tons 14 SEER / 81% AFUE ontents Nomenclature... 2 Product Specifications... 3
More informationCPH Commercial. 7½- to 12½-Ton Self-Contained. Packaged Heat Pump. Cooling / Heating Capacities: up to 11.5 EER up to 3.5 COP. 90, ,000 BTU/h
PH ommercial 7½- to 12½-Ton Self-ontained ooling / Heating apacities: 90,000 118,000 BTU/h Packaged Heat Pump up to 11.5 EE up to 3.5 P Standard Features -410A chlorine-free refrigerant High-efficiency
More informationDP14GM. Packaged Gas / Electric 14 SEER / 81% AFUE 2 to 5 Tons. Cooling Capacity: 23,000 57,500 BTU/h Heating Capacity: 40, ,000 BTU/h
DP14GM ooling apacity: 23,000 57,500 BTU/h Heating apacity: 40,000 120,000 BTU/h Packaged Gas / Electric 14 SEER / 81% AFUE 2 to 5 Tons ontents Nomenclature... 2 Accessories... 2 Product Specifications...
More informationDCC Commercial. 3- to 6-Ton Packaged Air Conditioner. Cooling Capacity: 34,600 71,000 BTU/h
D ommercial 3- to 6-Ton Packaged Air onditioner 13 SEE / Up to 11.3 EE ooling apacity: 34,600 71,000 BTU/h ontents Nomenclature... Product Specifications... 3 Expanded ooling Data... 7 Airflow Data...
More informationGPC13H. 2- to 5-Ton Packaged Air Conditioner 13 SEER / R-410A. Cooling Capacity: 24,000-59,000 BTU/h
ooling apacity: 4,000-59,000 BTU/h GP13H - to 5-Ton Packaged Air onditioner 13 SEER / R-410A Standard Features Energy-efficient compressor with internal relief valve PS blower motor; EEM blower motor on
More informationHMG Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Air Handler. 13 SEER Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner)
TECHNICAL SPECIFICATIONS HMG Series Air Handler 13 SEER Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner) The HMG Series of air handlers, when combined with our heat pump or air conditioner,
More informationHMG*T TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Air Handler Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner)
TECHNICAL SPECIFICATIONS HMG*T Air Handler Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner) The HMG*T series of air handlers, when combined with our heat pump or air conditioner, offer
More informationDCH Commercial. 3- to 6-Ton, Three-Phase Packaged Heat Pumps. Cooling Capacity: 35,000 70,000 BTU/h Heating Capacity: 34,600 70,000 BTU/h
DH ommercial Standard Features -4A chlorine-free refrigerant High-efficiency scroll compressor opper tube / aluminum fin coils High- and low-pressure switches efrigerant accumulator ontactor with lugs
More informationProduct Data. Convertible Air Handlers 1 1/2 5Ton
Product Data Convertible Air Handlers 1 1/2 5Ton TEM6A0B24H21S TEM6A0B30H21S TEM6A0C36H31S TEM6A0C42H41S TEM6A0C48H41S TEM6A0D48H41S TEM6A0C60H51S TEM6A0D60H51S The TEM6 series air handler is designed
More informationGPG14M. 2- to 5-Ton Packaged Gas/Electric Units 14 SEER / 81% AFUE
ooling apacities:,000 to 57,500 BTU/h Heating apacities: 40,000 to 10,000 BTU/h GPG14M - to 5-Ton Packaged Gas/Electric Units 14 SEER / 81% AFUE ontents Nomenclature... Product Specifications... Expanded
More informationBCE5V PRODUCT SPECIFICATIONS ENHANCED AIR HANDLER APPLICATION INSTALLATION CABINET COILS COMPONENTS ACCESSORIES WARRANTY
PRODUCT SPECIFICATIONS APPLICATION 1 1/2-5 ton systems Sequenced for demand management External access to heater circuit breakers FORM NO. -100 (12/2018) INSTALLATION 1 piece design Smaller profile for
More information3- to 6-Ton. 13 SEER / up to 11.3 EER & 7.7 HSPF. Packaged Heat Pump. Heating Capacity: 34,600 70,000 BTU/h. Cooling Capacity: 35,000 70,000 BTU/h
PH ommercial ooling apacity: 5, 7, BU/h Heating apacity: 4,6 7, BU/h - to 6-on Packaged Heat Pump SEE / up to. EE & 7.7 HSPF Standard Features -4A chlorine-free refrigerant High-efficiency scroll compressor
More informationDZ11S Commercial. Plus & 10-Ton, Three-Phase Split System Heat Pump with One Two-Speed Indoor Air Handler and Two 4-Ton or Two 5-Ton Condensers
DZ11S ommercial 7.5- & 10-Ton, Three-Phase Split System Heat Pump 11 EER / 3.3 OP / R-410A Plus 7.5- & 10-Ton, Three-Phase Split System Heat Pump with One Two-Speed Indoor Air Handler and Two 4-Ton or
More informationGPH13H. Packaged Heat Pump. 13 SEER / R-410A 2 to 5 Tons. Cooling Capacity: 24,000-57,500 BTU/h Heating Capacity: 22,000-54,500 BTU/h
H Packaged Heat Pump ooling apacity: 24,000-57,500 BTU/h Heating apacity: 22,000-54,500 BTU/h 13 SEER / R-410A 2 to 5 Tons Standard Features Energy-efficient compressor with internal relief valve PS blower
More informationTECHNICAL GUIDE GENERAL SPECIFICATIONS COMMERCIAL SPLIT-SYSTEM COOLING UNITS FOUR PIPE SYSTEM OUTDOOR UNIT:
036-21323-001-B-0202 GENERAL SPECIFICATIONS OUTDOOR UNIT: Two independent refrigerant circuits Inherently protected fan motors Two independent scroll compressors V-Coil Design Exterior service port connections
More informationProduct Data. Convertible Air Handlers 1 1/2 5Ton
Product Data Convertible Air Handlers 1 1/2 5Ton TEM6A0B24H21SB TEM6A0B30H21SB TEM6A0C36H31SB TEM6A0C42H41SB TEM6A0C48H41SB TEM6A0D48H41SB TEM6A0C60H51SB TEM6A0D60H51SB The TEM6 series air handler is designed
More informationProduct Data. Convertible Air Handlers 1 1/2 5 Ton B-EN. August 2015
Product Data Convertible Air Handlers 1 1/2 5 Ton TEM6A0B24H21S TEM6A0B30H21S TEM6A0C36H31S TEM6A0C42H41S TEM6A0D48H41S TEM6A0D60H51S The TEM6 series air handler is designed for installation in a closet,
More informationDX13S Commercial. 3-, 4-, & 5-Ton, Three-Phase Split System Air Conditioner. Cooling Capacity: 36,000-60,000 BTU/h
DX13S ommercial ooling apacity: 36,000-60,000 BTU/h 3-, 4-, & 5-Ton, Three-Phase Split System Air onditioner ontents Nomenclature... 2 Product Specifications... 3 Expanded ooling Data... 4 AHRI Ratings...
More informationDP13CM. Packaged Air Conditioner 3, 4, & 5 Tons / 13 SEER. Cooling Capacity: 36,000-56,000 BTU/h
DP13M ooling apacity: 36,000-56,000 BTU/h Packaged Air onditioner 3, 4, & 5 Tons / 13 SEER ontents Nomenclature... Product Specifications... 3 Expanded ooling Data... 4 Airflow Data... 10 Heat Kit Electrical
More informationTECHNICAL GUIDE ADD - ON COILS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS DESCRIPTION MODELS: MC, PC, FC, HD, UC CFM 1.
TECHNICAL GUIDE ADD - ON COILS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: MC, PC, FC, HD, UC 600-2000 CFM 1.5-5 TON COILS DESCRIPTION 526002-BTG-B-0710 These cooling and heat pump coils are
More informationDSG Commercial. 3-5 Ton Packaged Gas/ Electric Units 14 SEER / up to 12.0 EER Up to 81% Efficient
DS ommercial - 5 Ton Packaged as/ Electric Units 4 SEE / up to 2.0 EE Up to 8% Efficient ooling apacity: 5,000 58,000 BTU/h Heating apacity: 46,000 8,000 BTU/H ontents Nomenclature... 2 Product Specifications...
More informationSSX16 PRODUCT SPECIFICATIONS 16 SEER / R-410A 2 TO 5 TONS HIGH-EFFICIENCY SPLIT SYSTEM AIR CONDITIONER COOLING CAPACITY 24,000 BTU/H TO 57,000 BTU/H
HIGH-EFFIIENY PRODUT SPEIFIATIONS SPLIT SYSTEM AIR ONDITIONER The Goodman Air onditioner uses the environmentally friendly refrigerant R-410A, which is chlorine-free to help prevent damage to the ozone
More informationProduct Data. Convertible Air Handlers 1 1/2 5 Ton D-EN. September 2016
Product Data Convertible Air Handlers 1 1/2 5 Ton TEM6A0B24H21S TEM6A0B30H21S TEM6A0C36H31S TEM6A0C42H41S TEM6A0C48H41S TEM6A0D48H41S TEM6A0C60H51S TEM6A0D60H51S The TEM6 series air handler is designed
More informationPA95 12 SEER FEATURES 2 THRU 4 TON SINGLE PACKAGE
PACKAGE AIR CONDITIONER PA95 12 SEER C 2 THRU 4 TON SINGLE PACKAGE FEATURES CONSTRUCTED FOR DURABILITY All panels made from galvanized steel pre--coated inside and out -- using a polyester top coat, on
More informationAdvance Information SPLIT SYSTEM HEAT PUMP 10 SEER. ERA 018 thru thru 5 NOMINAL TONS DESCRIPTION FEATURES
515.16-TG1Y (1095) Advance Information SPLIT SYSTEM HEAT PUMP 10 S ERA 018 thru 060 1.5 thru 5 NOMINAL TONS DESCRIPTION The ERA series heat pumps are designed for use with a variety of YORK evaporator
More informationGSZ16. High-Efficiency Split System Heat Pump Up to 16 SEER & 9.0 HSPF 1½ to 5 Tons
ooling apacity: 18,000 to 60,000 Heating apacity: 18,000 to 60,000 High-Efficiency Split System Heat Pump Up to 16 SEER & 9.0 HSPF 1½ to 5 Tons ontents Nomenclature... 2 Product Specifications... 3 Expanded
More informationMERIT Series R-410A - Upflow / Horizontal - Variable Speed
PRODUCT SPECIFICATIONS AIR HANDLERS CBX5UHV (-01) MERIT Series R-10A - Upflow / Horizontal - Variable Bulletin No. 10611 March 015 Supersedes November 01 MODEL NUMBER IDENTIFICATION CB X 5 UH V - 00-0
More informationAIR HANDLERS RBHM- SERIES AIR HANDLERS AND FAN COIL UNIT
FORM NO. H11-521 AIR HANDLERS earth friendly refrigerant RBHM- SERIES AIR HANDLERS AND FAN COIL UNIT Features Versatile 3-way convertible design for upflow, horizontal left and horizontal right. Available
More informationDZ11TA Commercial. 7 ½ & 10-Ton, Three-Phase Split System Heat Pump 11 EER/ IEER /3.3 COP/R-410A
DZ11TA ommercial 7 ½ & 10-Ton, Three-Phase Split System Heat Pump 11 EER/13-13.5 IEER /3.3 OP/R-410A ontents Nomenclature...2 Product Specifications...3 Expanded ooling Data...4 Expanded Heating Data...12
More informationDX11S Commercial & 10-ton, Three-Phase Split System Air Conditioner 11.2 EER / R-410A. Plus
DX11S ommercial 7.5- & 10-ton, Three-Phase Split System Air onditioner 11.2 EER / R-410A Plus 7.5- & 10-Ton, Three-Phase Split System Air onditioner with One Two-Speed Indoor Air Handler and Two 4-Ton
More informationDX13S Commercial. 3-, 4-, & 5-Ton, Three-Phase. Cooling Capacity: 36,000-60,000 BTU/h
DX13S ommercial Standard Features R-410A chlorine-free refrigerant Energy-efficient compressor Factory-installed filter drier opper tube/ enhanced aluminum fin coil Service valves with sweat connections
More informationTECHNICAL GUIDE LISTED SPLIT-SYSTEM HEAT PUMPS 13 SEER R-410A MODELS: THGD30 THRU 60 (2.5 THRU 5 NOMINAL TONS - 3 PHASE)
TECHNICAL GUIDE SPLIT-SYSTEM HEAT PUMPS 13 SEER R-410A MODELS: THGD30 THRU 60 (2.5 THRU 5 NOMINAL TONS - 3 PHASE) LISTED ISO 9001 Certified Quality Management System Due to continuous product improvement,
More informationMB6(B,E,V)M Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Modular Indoor Blower 13+ SEER Residential System. Additional MB6EM Features:
TECHNICAL SPECIFICATIONS MB6(B,E,V)M Series Modular Indoor Blower 13+ SEER Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner) The MB6 Series Modular Indoor Blower offers exceptional flexibility
More informationDZ11S Commercial & 10-Ton, Three-Phase
DZ11S ommercial 7.5- & 10-Ton, Three-Phase Split System Heat Pump 11 EER / 3.3 OP / R-410A ontents Nomenclature... 2 Product Specifications... 3 Expanded ooling Data... 4 Expanded Heating Data... 12 AHRI
More informationTECHNICAL GUIDE DESCRIPTION
TECHNICAL GUE SPLIT-SYSTEM AIR CONDITIONERS 10 SEER S: BRCS018 THRU 060 (1.5 THRU 5 NOMINAL TONS, 1 PH) H*BA-(T,W)036 THRU 090 (3 THRU 7.5 NOMINAL TONS, 3 PH) S: 018-060 (1 PH & 3 PH) S: 076-090 (3 PH)
More informationPackaged Gas/Electric. Cooling Capacity: 23,000 57,500 BTU/h
APG4M Packaged Gas/Electric 4 SEER / 8% AFUE ooling apacity:,000 57,500 BTU/h Heating apacity: 40,000 0,000 BTU/h ontents Nomenclature... Product Specifications... Expanded ooling Data... 7 Airflow Data...
More informationLISTED TECHNICAL GUIDE AFFINITY R-410A SPLIT-SYSTEM AIR CONDITIONERS UP TO 18 SEER MODELS: CZE024 THRU 060 (2 THRU 5 NOMINAL TONS)
E T I I I R P I T G 036-21592-002 Rev. A (1204) TECHNICAL GUIDE AFFINITY R-410A SPLIT-SYSTEM AIR CONDITIONERS UP TO 18 SEER MODELS: CZE024 THRU 060 (2 THRU 5 NOMINAL TONS) U R A C T MA N U F R C E UN I
More informationDESCRIPTION FEATURES
SPLIT-SYSTEM AIR COOLED CONDENSING UNIT H5CE150, H5CE180 AND H5CE240 12-1/2, 15 AND 20 NOMINAL TONS (World 50Hz) DESCRIPTION These outdoor condensing units are completely assembled, piped and wired at
More informationTECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS 24.5 SEER Residential System Indoor Section M1200 Product Line PAH4VM Series Variable Speed Air Handler C6 Series Residential Indoor Coils with EXV 2 M1200 12 YEAR ALL PARTS LIMITED
More informationTECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS 23 SEER Residential System Indoor Section M1200 Product Line PAH2VM Series Variable Speed Air Handler C6 Series Residential Indoor Coils with EXV 2 M1200 12 YEAR ALL PARTS LIMITED
More informationDCG Commercial. 3- to 6-ton Packaged Gas/Electric Units. Cooling Capacity: 34,600 71,000 BTU/h Heating Capacity: 36, ,400 BTU/h
D ommercial - to 6-ton Packaged as/electric Units SEE / up to. EE 80% AFUE ooling apacity: 4,600 7,000 BTU/h Heating apacity: 6,800 0,400 BTU/h ontents Nomenclature... 2 Product Specifications... Expanded
More informationGPC13M R-410A, 13 SEER. Packaged Air Conditioner. 3, 4, & 5 Tons. Cooling Capacity: 36,000-56,000 BTU/h
GP13M Packaged Air onditioner R-410A, 13 SEER ooling apacity: 36,000-56,000 BTU/h 3, 4, & 5 Tons Standard Features Energy-efficient compressor with internal relief valve EEM blower motor; PS blower motor
More informationPHB SERIES 7-1/2 and 10 TON
PHB SERIES 7-1/2 and 10 TON COMMERCIAL SINGLE PACKAGE HEAT PUMPS COMMERCIAL PACKAGE HEAT PUMP FEATURES Representative photo only, some models may vary in appearance. Rated in accordance with ARI Standard
More informationTECHNICAL GUIDE MODELS: RHP14J18 THRU 60 RHP SERIES SPLIT-SYSTEM HEAT PUMPS 14.5 SEER R-410A 1 PHASE 1.5 THRU 5 NOMINAL TONS DESCRIPTION FEATURES
TECHNICAL GUIDE RHP SERIES SPLIT-SYSTEM HEAT PUMPS 14.5 SEER R-410A 1 PHASE 1.5 THRU 5 NOMINAL TONS S: RHP14J18 THRU 60 Due to continuous product improvement, specifications are subject to change without
More informationProduct Data PF1MNC DIRECT EXPANSION FAN COIL SIZES 018 THRU 061 FEATURES/BENEFITS AVAILABLE SIZES: 18,000 to 61,000 BTU unit ELECTRICAL RANGE:
PF1MNC DIRECT EXPANSION FAN COIL SIZES 018 THRU 061 Product Data FEATURES/BENEFITS AVAILABLE SIZES: 18,000 to 61,000 BTU unit ELECTRICAL RANGE: 40 -va, 208/230 -v transformer, 60 Hz, 1 Phase. FAN MOTOR:
More informationB6BMMX Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Air Handler Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner)
TECHNICAL SPECIFICATIONS B6BMMX Series Air Handler Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner) The B6BMMX series of air handlers, when combined with our heat pump or air conditioner,
More informationSPLIT SYSTEM HEAT PUMPS. ERA Series 10 SEER Single and Three Phase TECHNICAL SPECIFICATIONS
515.16-TG1Y (499) TECHNICAL SPECIFICATIONS SPLIT SYSTEM HEAT PUMPS Models 018-060 1Ø 036, 048 3Ø ERA Series 10 SEER Single and Three Phase Models ERA 018 thru ERA090 Nominal Capacity: 18 thru 90 MBH Models
More informationBCE5E PRODUCT SPECIFICATIONS ENHANCED AIR HANDLER APPLICATION INSTALLATION CABINET COILS COMPONENTS WARRANTY
PRODUCT SPECIFICATIONS APPLICATION 2-5 ton systems Sequenced for demand management External access to heater circuit breakers FORM NO. -100 (11/2018) INSTALLATION One piece design Smaller profile for closet
More informationF-Series General Specifications
arling F-Series General Specifications F-Series breakers are available up to 700, and are also available with a 25 millivolt metering shunt construction. This optional construction provides a safe method
More informationDP14HM Commercial 3-5 TON THREE-PHASE PACKAGED HEAT PUMPS 14 SEER. Cooling Capacity: 34,400-58,000 BTU/h Heating Capacity: 33,200-57,000 BTU/h
DP14HM ommercial ooling apacity: 34,400-58,000 BTU/h Heating apacity: 33,00-57,000 BTU/h 3-5 TON THREE-PHASE PAKAGED HEAT MPS 14 SEER ontents Nomenclature... Product Specifications...3 Expanded ooling
More informationELITE Series R-410A - Upflow / Horizontal
PRODUCT SPECIFICATIONS AIR HANDLERS CBX7UH ELITE Series R-0A - Upflow / Horizontal Bulletin No. 08 March 0 Supersedes October 0 Nominal Capacity -. to Tons Optional Electric Heat -. to kw MODEL NUMBER
More information