Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5603)-0913-P Ton ( metric ton)

Size: px
Start display at page:

Download "Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5603)-0913-P Ton ( metric ton)"

Transcription

1 565 (supersedes 5)-09-P Technical Data Specifications & Capacities SL Crawler Crane 50 Ton (6. metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.

2 565 (supersedes 5)-09-P

3 565 (supersedes 5)-09-P Table Of Contents Upper Structure Frame Engine ydraulic System Load oist Drums Optional Front-Mounted Third oist Drum Boom oist Drum Boom oist System Swing System Counterweight Operator Cab Rated Capacity Limiter System Machinery Cab Catwalks Lower Structure Carbody Side Frames Travel and Steering Jack System Attachment and Options Conventional Tube Boom Tube Jib Auxiliary Tip Extension Luffing Boom Luffing Jib Dimensions Base Crane Side Frames Upper Counterweights Lower Counterweights Boom/Luffing Boom Jib/Luffing Fixed Jib ook Balls ook Blocks Assembly Diagram Working Weights Transport Weights Transport Drawings Load oist Performance Working Areas Attachments Main Boom Make-up Main Boom Working Range Diagram Main Boom Load Chart

4 565 (supersedes 5)-09-P Jib Attachment Make-up Jib Attachment Working Range Diagram Jib Attachment Load Charts

5 565 (supersedes 5)-09-P Upper Structure ydraulic System Frame All welded steel frame with precision machined surfaces for mating parts. Turntable Bearing S Inner race with internal swing gear is bolted to lower frame. S Outer race is bolted to upper frame. Engine Engine Full pressure lubrication, oil filter, air cleaner, hour meter, throttle, and electric control shutdown. Mitsubishi 6M70-TL Number of cylinders 6 Bore and stroke 5. x 5.9 in (5 x 50mm) Piston displacement 786 in (.88L) Engine rpm at full load speed,000 rpm i-idle rpm,00 rpm Gross engine hp 65 hp (7kw) Peak torque,4 ft lb ( rpm Electrical system 4 volt Fuel tank capacity 4 gal (508L) Batteries - volt Fuel Tank Equipped with fuel sight level gauges, flame arrester, and self-closing cap with locking eye for padlock. ydraulic Pumps The pump arrangement is designed to provide hydraulically powered functions allowing positive, precise control with in dependent or simultaneous operation of all crane functions. S Two variable displacement pumps operating at 4,55 psi (0kg/cm) and 74 gal/min (L/min) powers load hoist drums, boom hoist drum, optional third drum, self assembly cylinder, and travel. S One variable displacement pump operating at 4,6 psi (5kg/cm) and 4. gal/min (L/min) powers the swing motors, live mast flip, and counterweight removal. S One fixed displacement gear type pump operating at,987 psi (0kg/cm) and 5.8 gal/min (59.8L/min) powers the lower jacks, counterweight pinning, side frame pinning, and hoist brake cooling (optional). S One fixed displacement gear type pump operating at,47 psi (00kg/cm) and.7 gal/min (44L/min) powers the oil cooler fan. ydraulic Reservoir 9 gal (450L), equipped with sight level gauge. Diffusers built in for deaeriation. Filtration Ten micron, full flow, line filter in the control circuit. All oil is filtered prior to entering the reservoir. Counterbalance Valves All hoist motors are equipped with coun terbalance valves to provide positive load lowering and prevent accidental load drop if the hydraulic pressure is suddenly lost. Load oist Drums Each drum contains an axial piston, vari able speed hydraulic motor with individu al automatic winch motor brakes. S Power up/down operation modes S Optional wet-type free-fall brake sys tem S Automatic brake mode (spring applied, hydraulically released, wet type brake) S Drum lagging grooved for wire rope S Drum pawl controlled manually S Electronic drum rotation indicators S Mounted on anti-friction bearings S 4.57 in (0.6m) root diameter S 4.4 in (.05m) flange diameter S 5.0 in (0.90m) width The optional free-fall operation mode is designed to prevent load lowering even if the free-fall switch is accidentally acti vated. The automatic brake mode meets all OSA requirements for personnel han dling. Optional Front-Mounted Third oist Drum The hydraulic winch is mounted in the boom base section and is used in con junction with a fleeting sheave and three sheave assembly to run the wire rope over the boom top section. S Power up/down operation mode S Automatic brake mode (spring applied, hydraulically released) S Smooth drum S Electronic drum rotation indicator S Mounted on anti-friction bearings

6 565 (supersedes 5)-09-P Boom oist Drum Contains a pilot controlled, bi-directional, axial piston motor and a planetary gear re duction unit to provide positive control un der all load conditions. S Spring applied, hydraulically released, disc type brake controlled automatically S Drum pawl controlled automatically S Mounted on anti-friction bearings S 6.0 in (0.66m) root diameter S 8.58 in (0.98m) flange diameter S 0.7 in (0.6m) width Boom oist System Designed to lift off maximum boom or maximum boom plus jib and maximum luffing attachment unassisted. Operates up to a maximum boom angle of 8. Boom hoist limit system limits maximum boom angle operation. S -part reeving with in (mm) wire rope S Bridle assembly S 5 ft (7.6m) Live mast S ydraulic tubular boom backstops S Sheaves contain sealed anti-friction bearings S Boom speed from 0-70 is 69 sec onds with no load. Speed was deter mined using 00 ft (0.48m) of tube boom. Swing System Pilot controlled bi-directional axial piston motors and planetary gear reduction units to provide positive control under all load conditions. S Spring applied, hydraulically released, multi-plate brake S Free swing mode when lever is in neu tral position S Four position positive house lock S Two-speed swing S Audio/Visual swing alarm S Maximum swing speed is.7 rpm Counterweight Consists of an eleven-piece design that can be easily lowered to the ground using the removal cylinders. S ABCDE total upper counterweight is,000 lb (7 576kg) S Two carbody counterweights - 0,000 lb ( 8kg) each Total combined counterweight, ABC plus carbody counterweights is 0,000 lb (99 79kg). Operator Cab Fully enclosed modular steel compart ment is independently mounted and padded to protect against vibration and noise. S All tinted/tempered safety glass S Folding hinge entry door and sliding front glass window S 9,000 BTU hot water heater S 8,0 BTU air conditioner S Door and window locks S Circulating fan S Sun visor S Cloth seat S Defroster S Windshield wipers and washer S Dry chemical fire extinguisher S Engine instrumentation panel (voltmeter, engine oil pressure, engine water tem perature, fuel level, hydraulic oil tem perature, hour meter, and service moni tor system) S Electronic drum rotation indicators for front and rear hoist drums S Six way adjustable seat S and and foot throttle S Fully adjustable single axis controls S Swing lever with swing brake and horn located on handle S Bubble type level S Ergonomic gauge layout S Controls shut off lever S Control stand is adjustable for operator comfort. Rated Capacity Limiter System The SL rated capacity limiter system is a boom hoist load cell system. This system provides the operator with useful geometri cal data, to include: S Main Boom Length S Main Boom Angle S Jib Length S Jib Angle S Operating Mode S Load Radius S Boom Tip S Audible Alarm S Pre-Warning Light S Overload Light S Load On ook S Function kick-outs including over load S Operator settable stops (ramped stops) S Anti-Two Block Indicator S Boom hoist dead end load cell (no lineriders) Machinery Cab inged doors (three on right side, four on left side) for machinery access. Equipped with rooftop access ladder and skid resist ant finish on roof. Catwalks Standard on right and left sides. Catwalks are removable for reduced travel width.

7 565 (supersedes 5)-09-P Lower Structure Carbody Lower Frame All welded construction frame with preci sion machined surfaces for turntable bearing and rotating joint. S 9 ft 0 in (.00m) overall length S 4 ft 9 in (4.48m) overall width Side Frames Side Frames All welded, precision machined, hook and pinned, steel frames. S 9 ft in (5.87m) gauge S 7 ft 9 in (8.46m) overall length S 48 in (.m) wide track shoes S Sealed (oil filled) drive planetaries S Compact travel drives S Automatic hydraulic track adjustment system - optional Track Rollers S Eleven sealed (oil filled) track rollers per side frame S eat treated, mounted on oil filled antifriction bearings Tracks eat treated, self-cleaning, multiple hinged track shoes joined by one-piece full floating pins; 55 shoes per side frame Take Up Idlers Cast steel, heat treated, self-cleaning, mounted on aluminum/bronze bushings. Lubricated through idler shaft. S Track Tension Adjustment - Idler wheel adjusted by means of hydraulic cylinder and hand pump. Idler wheel shaft held in position with shims after adjustment is made. Travel and Steering Travel and Steering Each side frame contains a pilot con trolled, bi-directional, axial piston motor and a planetary gear reduction unit to pro vide positive control under all load condi tions. S Individual control provides smooth, precise maneuverability including full counter-rotation. S Spring applied, hydraulically released disc type brake controlled automatically S Maximum travel speed is 0.75 mph (.km/h). S Designed to 0% gradeability Jack System System contains four hydraulic cylinders individually pinned on swing out beams. S Individual controls are mounted on car body. S Minimum height of carbody when rest ing on pontoons is 7.4 in (0.44m). S Maximum height of carbody when rest ing on pontoons is 45 in (.4m). Attachment and Options Conventional Tube Boom -00 ft ( m) Basic Boom ft (8.9m) two-piece design that utilizes a 0 ft (9.4m) base section and a 0 ft (9.4m) open throat top section with in-line connecting pins on in (.0m) wide and 68 in (.7m) deep centers. S Boom foot on 5.7 in (.5m) centers S 4.5 in (0.cm) diameter chords S Lugs on base section for self assembly S Self assembly cylinder S Deflector roller on top section S Permanent skid pads mounted on top section to protect head machinery S Four,.5 in, (0.55m) root diameter polymide sheaves mounted on sealed anti-friction bearings S Tip extension and jib connecting lugs on top section S Mechanical boom angle indicator Tube Boom Extensions The following table provides the lengths available and the suggested quantity to obtain maximum boom in 0 ft (.05m) in crements. Midpoint pendant connections are required at ft (4.67m) for boom lengths of 50 ft (76.0m) and greater. S Polyamide wear blocks on top of each extension Tube Boom Extensions Quantity For Max Boom ft m S Maximum tip height of 0 ft 6 in (9.5m) S Boom connecting pins storage on each extension

8 4 565 (supersedes 5)-09-P Tube Jib 0-90 ft ( m) Basic Tube Jib 0 ft (9.4m) two-piece design that uti lizes a 5 ft (4.57m) base section and a 5 ft (4.57m) top section with in-line connecting pins on 0 in (0.76m) wide and 6 in (0.9m) deep centers. S in (5.08cm) diameter chords S One 8.50 in (0.47m) root diameter steel sheave mounted on sealed antifriction bearings S 0 ft (6.0m) jib extensions provide jib lengths of 0 ft (9.4m), 50 ft (5.4m), 70 ft (.4m), and 90 ft (7.4m). S Jib offset angles at 5, 5, and 5 S The maximum tip height of boom + jib [70 ft + 90 ft ( m)] is 6 ft in (0.7m). Auxiliary Tip Extension Designed to use in place of jib to provide clearance between working hoist lines. The extension is equipped with two nylon 8 in (45.7cm) root diameter sheaves mounted on sealed anti-friction bear ings. Maximum capacity is 0 Ton (8.4mt). Luffing Boom 0-90 ft ( m) S Common base and extensions as open throat boom S 5 ft (.5m) luffing extension required for bail anchor S Working angles of 88, 85,, 75, 70, and 65 S Working lengths of 0 ft (.5m) to 90 ft (57.9m) Luffing Boom Extensions The following table provides the lengths available and the suggested quantity to obtain the maximum luffing boom in 0 ft (.05m) increments. Midpoint pendants are not required. Luffing Boom Extensions Quantity For Max Boom ft m S Rear hoist drum becomes luffing jib hoist S Optional third drum provides second working hoist line, if required. S Designed for self-assembly S Luffing jib hoist bridle and bail can re main reeved for crane transport S Job site mobility with attachment S Rolled out or rolled under erection methods S Compact transport module Luffing Jib ft ( m) Basic Luffing Jib 90 ft (7.4m) six-piece design utilizes a 5 ft (.5m) luffing boom top section, 0 ft (.05m) luffing jib base section, 0 ft (6.0m) luffing jib top section, and 0 ft (.05m), 0 ft (6.0m), and 0 ft (9.4m) jib extension with in-line connecting pins. S 49 Ton (44.45mt) maximum capacity S Working lengths of 90 ft (7.4m) to 00 ft (.96m) S Lugs on base section to attach fanpost transport links S Two polyamide in (0.5m) root dia meter luffing jib head sheaves S Two polyamide in (0.5m) root diameter luffing boom auxiliary head sheaves S Pin-on nose wheel S Ten-part luffing jib hoist reeving S.8 in (5mm) diameter pendants S Anemometer with in-cab display Luffing Jib Extensions The following table provides the lengths available and the suggested quantity to obtain the maximum luffing jib in 0 ft (.05m) increments. Midpoint pendants are not required. Extension Lengths ft (m) Number Required 0 (.05) 0 (.05) Midfall 0 (6.0) 0 (9.4) (.9) S Deflector roller on top of each extension S Appropriate length pendants S Maximum luffing jib tip height of ft (.06m)

9 5 565 (supersedes 5)-09-P Dimensions General Dimensions English Metric ft 8.9m Minimum Load Radius.8 ft.90m Maximum Boom Angle 8 8 Track Shoe 48 in.m Basic Boom 6' Boom Angle 4' 4 (4.7m) ' 0.5 (.9m) 8' (.46m) 5'.5 (.56m) ' 0.75 (.98m) 9' 5 (5.9m) C L Of Rotation

10 6 565 (supersedes 5)-09-P 5' 5 (4.70m) 5' (4.65m) 9' 5 (5.9m) 48 (.m) 5'.5 (7.7m) ' (7.09m) 5' 5 (4.70m) 0' 6 (.0m) 57.5 (.45m) 6.75 (0.4m) 7.8 (0.45m) 9' (5.87m)

11 7 565 (supersedes 5)-09-P Base Crane Base Crane Ê 0 ft.5 in (.0m) * 45 in (.4m) Weight 87,05 lb (9 487kg) * Maximum height on pontoons * W Side Frames Side Frames Ë W Standard 48 (.m) Shoes Length 7 ft 9 in (8.46m) 48 in (.m) 57.5 in (.45m) Weight 4,490 lb (8 kg) Optional (.5m) Shoes Length 7 ft 9 in in 57.5 in Weight 4, lb (8.46m) (.5m) (.45m) (9 kg) L Number inside black circle Ê = # of components

12 8 565 (supersedes 5)-09-P Upper Counterweights A Base Counterweight Length Weight 6 ft.50 in 5 ft 5 in 7 ft.75 in 6,000 lb Ê (.89m) (4.70m) (.0m) (6 0kg) L A, B, C, D, & E, Wing Counterweights Length Length Weight: Left Side Right Side in 6 in 74.5 in 7 in.50 in (.5m) (.55m) (.89m) (.m) (0.m),0 lb,000 lb (5 6kg) (5 44kg) L Length Weight ft 5.75 in 4.5 in 5.5 in 0,000 lb L Î W Lower Counterweights Carbody Counterweights W W L Ë (.m) (.0m) (0.90m) ( 8kg) W Number inside black circle Ê = # of components

13 9 565 (supersedes 5)-09-P Boom/Luffing Boom 68 in (.7m) x in (.0m) Boom/Luffing Boom Extensions 86.6 (.0m) 0' 5.5 (.9m) (.89m) 0 ft (.05m) Extension Weight :,70 lb (785kg) Weight includes pins and pendants (.0m) 0' 5.5 (6.4m) (.89m) 0 ft (6.0m) Extension Weight :,05 lb ( 046kg) Weight includes pins and pendants (.0m) 0' 5.5 (9.8m) 0 ft (9.4m) Extension (.89m) Weight :,6 lb ( 68kg) Weight includes pins and pendants (.0m) ' 5.5 (.m) ft (.9m) Extension (.89m) Weight : 4,596 lb ( 085kg) Weight includes pins and pendants. L 0 ft (9.4m) Boom Top Section Length Deep Weight ft 0.5 in 84.5 in 68 in 75.5 in 5, lb W Ê (0.0m) (.4m) (.7m) (.9m) ( 65kg) D L 0 ft (9.4m) Boom Base Section Length Deep Weight 0 ft 9 in in 68 in 76 in 5, lb Ê W (9.7m) (.0m) (.7m) (.9m) ( 7kg) D Number inside black circle Ê = # of components

14 0 565 (supersedes 5)-09-P W orsehead Extension* Length Weight 5.5 in 0 in.5 in, lb L Ê (.5m) (0.5m) (.04m) (54kg) Jib/Luffing Fixed Jib 5 ft (4.57m) Jib Top Section* L Ê W Length 6 ft 7 in (5.05m) in (.46m).75 in (.04m) Weight 790 lb (58kg) Weight includes pendants and hardware. L 5 ft (4.57m) Jib Base & Strut Section* Ê W Length 8 ft.50 in (5.5m) 8 in (0.97m).50 in (0.8m) in (.69m) Weight,70 lb (77kg) Weight includes pins, basic frontstay & backstay pendants, and hardware. Number inside black circle Ê = # of components * - Optional equipment

15 565 (supersedes 5)-09-P 0 ft (.05m) Jib Extension* W Ê L Length 0 ft in (.m) 8 in (0.97m) 4.50 in (0.88m) Weight 6 lb (65kg) Weights includes pins, pendants, and hardware. 0 ft (6.0m) Jib Extension* W Ê L Length 0 ft in (6.7m) 8 in (0.97m) 4.50 in (0.88m) Weight 59 lb (69kg) Weights includes pins, pendants, and hardware. Luffing Jib Extensions* Weights Include Pendants and ardware 0 ft (.05m) Extension W Length 0 ft 5.5 in (.9m) 65 in (.65m) 54 in (.7m) Weight 54 lb (45kg) Weights includes pins, pendants, and hardware. L 0 ft (6.0m) Extension W Length 0 ft 5.5 in (6.4m) 65 in (.65m) 54 in (.7m) Weight 96 lb (46kg) Weights includes pins, pendants, and hardware. L 0 ft (9.4m) Extension W Length 0 ft 5.5 in (9.8m) 65 in (.65m) 54 in (.7m) Weight 8 lb (67kg) Weights includes pins, pendants, and hardware. L ft (.9m) Extension W Length ft 5.5 in (.m) 65 in (.65m) 54 in (.7m) Weight 4 lb (88kg) Weights includes pins, pendants, and hardware. 0 ft (6.0m) Luffing Jib Top Section* L Ê L Length ft in (6.75m) 6 in (.m) in (.44m) Weight,46 lb ( 096kg) Weight includes pendants and hardware. W Number inside black circle Ê = # of components * - Optional equipment

16 565 (supersedes 5)-09-P W ook Balls 0 Ton (8.mt) Swivel ook Ball* Weight.75 in 4.75 in,55 lb Ê (0.55m) (.06m) (569kg) W 0 Ton (8.mt) Non-Swivel Ê ook Ball* Weight.75 in 9 in, lb (0.55m) (0.99m) (549kg) ook Blocks Ton (6.mt) -Sheave ook Block* Weight 5.50 in 8.75 in 5 in.75 in,9 lb W W Ê (0.65m) (0.7m) (0.8m) (.54m) ( 0kg) W Number inside black circle Ê = # of components * - Optional equipment

17 565 (supersedes 5)-09-P 65 Ton (50mt) 5-Sheave ook Block* Weight in 8.75 in 8.5 in 8.50 in,9 lb W Ê W (0.56m) (0.7m) (0.7m) (.07m) ( 59kg) W W 00 Ton (8.4mt) 5-Sheave ook Block* Weight 5 in 8.75 in 5 in 58 in 4,00 lb W Ê (0.6m) (0.7m) (0.89m) (.47m) ( 950kg) W W 50 Ton (6.8mt) 6-Sheave ook Block* Weight 7 in 5.5 in 4.75 in in 5,7 lb W Ê (0.69m) (0.90m) (0.88m) (.4m) ( 595kg) W Number inside black circle Ê = # of components * - Optional equipment

18 4 565 (supersedes 5)-09-P Assembly Diagram Link-Belt Working Weights Ctwt AB+A Ctwt ABC+A Ctwt ABCDE + A lb (kg) lb (kg) lb (kg) 5,5 (4 ),77 (54 9) 90,069 (76 9) psi kg/cm Based on basic crane including Mitsubishi 6M70-TL diesel engine, turntable bearing, live mast, part boom hoist reeving, backstops, counterweight, crawler lower with 48 in (.m) wide track shoes, sealed track rollers, and catwalks, plus the following: Lifting crane - includes ft (8.9m) basic boom, self assembly cylinder,,50 ft (4.48m) of type ZB main hoist rope, 975 ft (97.8m) of type ZB auxiliary hoist rope, 50 ton (6.8mt) hook block, and basic pendants. Ground Bearing Pressure

19 5 565 (supersedes 5)-09-P Transport Weights Item Description Gross Weight Transport Loads lb (kg) # Base crane 87, Add Side Frame w/ 48 (.m) Shoes - Two required 4,490 8 Add Base Ctwt 6, Add Ctwt Biscuit (Left) - Five required,0 Add Ctwt Biscuit (Right) - Five required #6 #7 #8 #9 5 6, Add Lower Ctwt - Two Required 0,000 8 Add 0 ft (9.4m) Base Section w/ Backstops & Boom Foot Pins 7, Add 0 ft (.05m) Extension w/ Pendants, Add 0 ft (6.0m) Extension w/ Pendants, Add 0 ft (9.4m) Extension w/ Pendants - Three required,6 68 Add ft (.9m) Extension w/ Pendants - Three required 4, Add 0 ft (9.4m) Top Section 5, 65 Add 5 ft (4.58m) Jib Base & Strut,70 77 Add 0 ft (6.0m) Jib Extension w/ Pendants & Pins - Three required Add 5 ft (4.6m) Jib Peak Section Add 50 Ton (6.mt) ook Block 5,7 595 Add 0 Ton (8.4mt) ook Ball w/o Swivel, 549 Approximate Total Shipping Weight # # #4 #5 #0 # # lb 87,05 4,490 4,490 6,6 4,596,47 6,945 4,96 4,77 9,074 4,776,6 kg

20 6 565 (supersedes 5)-09-P Transport Drawings ' (.4m) ' 6 (4.m) 7' 4 (.4m) 7' 4 (.4m) 0' (.m) LOAD # - 87,05 lb (9 487kg) Base crane 8' (.49m) LOAD # - 4,490 lb (8 kg) Side frame w/ 48 (.m) shoes 8' (.49m) LOAD # - 4,490 lb (8 kg) Side frame w/ 48 (.m) shoes ' (.68m) 6 (0.9m) LOAD #4-6,6 lb (6 477kg) Lower counterweight, ft (.9m) boom extension, and 0 ft (.05m) boom extension

21 7 565 (supersedes 5)-09-P ' (.6m) LOAD #5-4,596 lb (5 69kg) Lower counterweight and ft (.9m) boom extension ' 8 (.56m) LOAD #6 -,47 lb (4 67kg) 0 ft (9.4m) base section with backstops and boom foot pins, one,0 lb (5 6kg) counterweight, and one,000 lb (5 44kg) counterweight ' 9 (.58m) LOAD #7-6,945 lb (6 758kg) 0 ft (9.4m) top section, one,0 lb (5 6kg) counterweight, one,000 lb (5 44kg) counterweight, 0 ton (8.4mt) hook ball, and 50 ton (6.mt) hook block ' (.6m) LOAD #8-4,96 lb (9 kg) Two,0 lb (5 6kg) counterweights, one,000 lb (5 44kg) counterweight, and ft (.9m) boom extension

22 8 565 (supersedes 5)-09-P ' (.68m) ' 0 (0.9m) LOAD #9-4,77 lb (9 76kg) One,0 lb (5 6kg) counterweight, two,000 lb (5 44kg) counterweights, 0 ft (6.0m) boom extension, and 0 ft (9.4m) boom extension ' (.4m) LOAD #0-9,074 lb (7 74kg) 6,000 lb (6 0kg) base counterweight, 0 ft (6.0m) jib extension, 5 ft (4.57m) jib base and strut, and 5 ft (4.57m) jib peak 0' (.m) LOAD # - 4,776 lb ( 66kg) 0 ft (9.4m) boom extension and two 0 ft (6.0m) jib extensions 0' (.m) LOAD # -,6 lb ( 68kg) 0 ft (9.4m) boom extension

23 9 565 (supersedes 5)-09-P Load oist Performance Front & Rear Drums - 8mm Wire Rope Rope Layer Maximum Line Pull No Load Line Speed Full Load Line Speed Pitch Diameter Layer Total lb kg ft/min m/min ft/min m/min in mm ft m ft m 59, , , , , , , , , , Boom oist Drums - mm Wire Rope Rope Layer Maximum Line Pull No Load Line Speed Full Load Line Speed Pitch Diameter Layer Total lb kg ft/min m/min ft/min m/min in mm ft m ft m 0, , , , , , , , , Third oist Drum -.0 in (5.4mm) Wire Rope Rope Layer Maximum Line Pull No Load Line Speed Full Load Line Speed Pitch Diameter Layer Total lb kg ft/min m/min ft/min m/min in mm ft m ft m 9, , , , , Diameter Wire Rope Application Max. Permissible Load in mm Front oist -- 8 Rear oist -- Boom oist Third Drum Type Wire Rope Descriptions lb kg ZB, Non-Rotating, 4 x 7 Classification, EIPS, Right Regular or Right Lang Lay 8 ZB, Non-Rotating, 4 x 7 Classification, EIPS, Right Regular or Right Lang Lay -- LB 5,000 6 x 5 (6 x9 Class) - Filler Wire - Preformed - I.W.R.C - Right Lay - Regular Lay Compacted Strands RB, x 9 Rotation Resistant Compacted Strand - igh Strength Preformed, Right Regular Lay

24 0 565 (supersedes 5)-09-P Working Areas Over Side Boom Over Drive End Over Idler End See Note Center Of Rotation Longitudinal Of Crawler See Note Idler Sprocket Drive Sprocket Over Side Note: These Lines Determine The Limiting Position Of Any Load For Operation Within Working Areas Indicated.

25 565 (supersedes 5)-09-P Attachments BL Jib Auxiliary orsehead Tip Extension ÏÏ ÏÏ JE Main Boom JE Main Boom JE Main Boom -00 ft ( m) Main Boom -70 ft ( m) Main Boom With Auxiliary orsehead Tip Extension -70 ft ( m) Main Boom With 0-90 ft ( m) Jib

26 565 (supersedes 5)-09-P Main Boom Make-up Boom Length ft (m) (8.9) 0 (.05) 70 (.4) Boom Extensions ft (m) (4.8) 90 (7.4) 0 (6.4) 0 (9.0) 00 (0.48) 0 (.5) 0 (6.58) 0 (9.6) (4.67) 50 (45.7) (48.77) 70 (5.8) (54.86) 90 (57.9) 00 (.96) 0 (64.0) 0 (67.06) 0 (70.0) (7.5) 50 (76.0) (79.5) 00 (9.44) 90 (88.9) 70 (8.0) (85.4) (.9) Notes:. Capacities shown are in kips/metric tons ( kip =,000 lb / metric ton = 0.45 kips) and are not more than 75% of the tipping loads with the crane standing level on firm supporting surface. A deduction must be made from these capacities for weight of hook block, hook ball, sling, grapple, load weighing device, etc. When using main hook while jib or tip extension is attached, reduce capacities by values shown in Crane Rating Manual. See Operator's Manual for all limitations when raising or lowering attachment.. The capacities in the shaded areas are based on structural strength. The capacities in the non-shaded areas are based on stability ratings.. For recommended reeving, parts of line, wire rope type, and wire rope inspection, see Wire Rope Capacity Chart, Operator's Manual, and Parts Manual. 4. Load ratings are based on freely suspended loads and make no allowances for such factors as the effect of the wind, ground conditions, and operating speeds. The operator shall therefore reduce load ratings in order to take these conditions into account. Refer to the Crane Rating Manual for Wind Speed Restrictions. 5. The 5 ft (7.6m) live mast must be used for all capacities listed. 6. The least stable rated condition is over the side. 7. Booms must be erected and lowered over the end for maximum stability. 8. Main boom length must not exceed 00 ft (9.44m). 9. Do not operate at radii and boom lengths where the Crane Rating Manual lists no capacity. Do not use longer booms or jibs than those listed in the Crane Rating Manual. Any of the above can cause a tipping condition, or boom and jib failure. 0. These capacities are in compliance with ASME/ANSI B0.5 at date of manufacture.. These capacities apply only to the crane as originally manufactured and normally equipped by Link Belt Construction Equipment Company.

27 565 (supersedes 5)-09-P Main Boom Working Range Diagram ' TO 00' MAIN BOOM Maximum Boom Angle See Note Main Boom Length In Feet Above Ground Minimum Boom Angle See Note Operating Radius From Centerline Of Rotation CL Of Rotation Notes:.. Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent radius, and boom angle change must be accounted for when applying load to hook. Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.

28 4 565 (supersedes 5)-09-P Main Boom Load Chart Main Boom Lift Capacity Chart - Rotation - ABCDE + A [,000 +,000 lb ( kg)] Counterweight [All capacities are listed in kips (mt)] Boom Length ft (m) Load Radius ft (m) (8.50) (.96) (6.8) 5 (4.6) 4 (4.6) 49.4 (.9) 5 (4.6) 5 (4.6) 46.4 (09.) 5 (4.6) 6 (4.9) 44.8 (97.) 4.0 (96.4) 6 (4.9) 7 (5.4) 4. (86.5) 9.5 (85.7) 7 (5.4) 8 (5.55) 89.7 (76.8) 88. (76.) 8 (5.55) 9 (5.86) 70.4 (68.0) 69. (67.5) 67.5 (66.7) 9 (5.86) 0 (6.7) 5.9 (.) 5.8 (59.6) 50. (58.9) 0 (6.7) 5 (7.7) 85. (9.) 84. (9.0) 8. (8.5) 8.0 (7.9) 74. (4.4) 0 (9.5) 8.5 (08.) 7.5 (07.7) 4. (06.). (04.9) 8.8 (0.8) 6.6 (0.8).4 (8.8) 0 (9.5) 5 (0.79) 90.5 (86.4) 90.9 (86.6) 90.9 (86.6) 90.4 (86.4) 90. (86.) 88. (85.4).4 (8.8) 5 (0.79) (.4) 57.7 (7.5) 58. (7.7) 58.0 (7.7) 57.7 (7.5) 57. (7.4) 56.9 (7.) 56.4 (70.9) (.4) 50 (5.4) 6.5 (5.8) 6.9 (5.0) 6.7 (5.9) 6.4 (5.8) 6.0 (5.6) 5.5 (5.4) 4.9 (5.) 50 (5.4) (8.50) 9.6 (4.5) 9.0 (4.7) 9.9 (4.7) 9.6 (4.5) 9. (4.) 90.5 (4.) 89.9 (.8) (8.50) 75.4 (4.) 75. (4.) 74.9 (4.0) 74.4 (.7) 7.9 (.5) 7. (.) 70 (.59) (4.67) 6.4 (8.8) 6.0 (8.6) 6.5 (8.) 6.0 (8.) 6. (7.8) (4.67) 90 (7.76) 54.4 (4.7) 54. (4.5) 5.6 (4.) 5.0 (4.0) 5.4 (.8) 90 (7.76) 00 (0.84) 47. (.4) 46.6 (.) 46.0 (0.9) 45.4 (0.6) 00 (0.84) 0 (.9) 4.4 (8.8) 4.0 (8.6).4 (8.) 9.8 (8.) 0 (.9) 0 (7.0) 6.4 (6.5) 5.8 (6.) 5. (6.0) 0 (7.0) 0 (.09).5 (4.7).0 (4.5).4 (4.) 0 (.09) (4.8) 8.7 (.0) 8. (.7) (4.8) 50 (46.6) 5.9 (.7) 5. (.5) 50 (46.6) (49.4).9 (0.4) (49.4) 70 (5.4) 0.7 (9.4) 70 (5.4) 70 (.59) (4.67) 00 (0.84) 0 (7.0) (4.8) (49.4) (55.5) Load Radius ft (m) 5 (7.7) This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.

29 5 565 (supersedes 5)-09-P Main Boom Lift Capacity Chart - Rotation - ABCDE + A [,000 +,000 lb ( kg)] Counterweight [All capacities are listed in kips (mt)] Boom Length ft (m) Load Radius ft (m) 00 (6.68) 5 (0.79) 4.8 (64.) (.4).6 (6.8) 5.8 (5.5) 96.5 (4.8) 50 (5.4) 4.4 (5.9).9 (5.) 90.5 (4.) 76.5 (4.7) 64.5 (9.) 54.9 (4.9) 50 (5.4) (8.50) 89. (.5) 88.7 (.) 84.8 (8.5) 7. (.).5 (7.4) 5. (.) (8.50) 70 (.59) 7.6 (.9) 7.0 (.7) 7. (.) 64. (9.) 54. (4.5) 4.8 (9.4) 70 (.59) (4.67).7 (7.5).0 (7.) 59. (6.9) 57.7 (6.) 48.6 (.0) 8.5 (7.5) (4.67) 90 (7.76) 5.7 (.5) 5.0 (.) 50. (.8) 49.6 (.5) 4.0 (8.6) 4.9 (5.8) 90 (7.76) 00 (0.84) 44.7 (0.) 44.0 (0.0) 4. (9.6) 4.6 (9.) 6.9 (6.7).4 (4.) 00 (0.84) 0 (.9) 9. (7.7) 8.4 (7.4) 7.7 (7.) 7.0 (6.8).7 (5.) 8.6 (.0) 0 (.9) 0 (7.0) 4.5 (5.6).8 (5.). (5.0).4 (4.7) 0. (.7) 5.8 (.7) 0 (7.0) 0 (.09) 0.7 (.9) 0.0 (.6) 9. (.) 8.5 (.9) 7.7 (.6).5 (0.7) 0 (.09) (4.8) 7.4 (.4) 6.7 (.) 6.0 (.8) 5. (.5) 4.5 (.). (9.6) (4.8) 50 (46.6) 4.7 (.) 4.0 (0.9). (0.5).5 (0.).7 (9.8) 9. (8.8) 50 (46.6) (49.4). (0.).5 (9.8) 0.8 (9.4) 0.0 (9.) 9. (8.8) 7.6 (8.0) (49.4) 70 (5.4) 0. (9.) 9.4 (8.8) 8.7 (8.5) 7.9 (8.) 7. (7.8) 6. (7.4) 70 (5.4) (55.5) 8. (8.) 7.5 (7.9) 6.8 (7.6) 6.0 (7.) 5. (6.9) 4.5 (6.6) (55.5) 90 (58.) 6.5 (7.5) 5.8 (7.) 5. (6.8) 4. (6.5).6 (6.).8 (5.8) 90 (58.) 00 (6.68) 4. (6.5).5 (6.).8 (5.8). (5.5). (5.) 00 (6.68) 0 (64.76).6 (5.7).8 (5.4).5 (5.) 0.7 (4.9) 0.0 (4.5) 0 (64.76) 0. (4.7) 0. (4.7) 9.5 (4.) 8.7 (.9) 0 (67.85) 0 (70.9) 9. (4.) 8.4 (.8) 7.6 (.4) 0 (70.9) (74.0) 8. (.7) 7.4 (.4) 6.6 (.0) (74.0) 50 (77.0) 6.4 (.9) 5.7 (.6) 50 (77.0) (.8) 5.5 (.5) 4.8 (.) (.8) 70 (8.7) 4.0 (.8) 70 (8.7) (86.5). (.5) (86.5) 0 (67.85) 0 (67.85) (74.0) (.8) (86.5) 00 (9.5) Load Radius ft (m) 5 (0.79) (.4) This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.

30 6 565 (supersedes 5)-09-P Jib Attachment Make-up Jib Length ft (m) Jib Extensions Jib Extensions 0 ft (.05m) 0 ft (6.0m) 0 (9.5) (.9) 50 (5.4) (8.9) ÏÏ 70 (.4) (4.8) 90 (7.4) Notes:. Capacities shown are in kips/metric tons ( kip =,000 lb / metric ton = 0.45 kips) and are not more than 75% of the tipping loads with the crane standing level on a firm supporting surface.. A deduction must be made from these capacities for the weight of the main boom hook block or hook ball, jib hook block or hook ball, slings, grapples, load weighing devices, etc. When using main hook while jib is attached, reduce capacities by values shown in Crane Rating Manual. See Operator's Manual for all limitations when raising or lowering attachment.. The capacities in the shaded areas are based on structural strength. The capacities in the non-shaded areas are based on stability ratings. 4. Load ratings are based on freely suspended loads and make no allowances for such factors as the effect of the wind, ground conditions, and operating speeds. The operator shall therefore reduce load ratings in order to take these conditions into account. Refer to the Crane Rating Manual for Wind Speed Restrictions. 5. These capacities are for ABCDE+A counterweight. 6. These capacities are for working areas. 7. These capacities are for 0-90 ft ( m) jib lengths only. 8. The jib cannot be used on boom lengths over 70 ft (8.0m). 9. The least stable rated condition is over the side. 0. These capacities are in compliance with ASME/ANSI B0.5 at date of manufacture.. These capacities apply only to the crane as originally manufactured and normally equipped by Link Belt Construction Equipment Company.

31 7 565 (supersedes 5)-09-P Jib Attachment Working Range Diagram ' TO 70' MAIN BOOM WIT 0' TO 90' JIB Maximum Boom Angle See Note ' ' 50' 70' ' 90' ' Main Boom + Jib Length Minimum Boom Angle See Note Main Boom Length in feet above ground Notes: Operating Radius From Centerline Of Rotation C L Of Rotation Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent radius, and boom angle change must be accounted for when applying load to hook. Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.

32 8 565 (supersedes 5)-09-P Jib Attachment Load Charts 0 ft (9.5m) Offset Jib Length - _ Rotation - ABCDE + A [,000 +,000 lb ( kg)] Counterweight [All capacities are listed in kips (mt)] 5 Offset 5 Offset Main Boom Length ft (m) 5 Offset 0 (6.7) 76.8 (4.8) 0 (6.7) 5 (7.7) 74. (.7) 5 (7.7) 69.8 (.7) 5 (7.7) 0 (9.5) 7. (.7) 74.4 (.7) 0 (9.5) 68. (0.9) 0 (9.5). (7.) 5 (0.79) 70. (.8) 7.0 (.) 5 (0.79) 66.6 (0.) 68. (0.9) 5 (0.79) 55.5 (5.) (.4) 68. (.0) 7.7 (.5) 7.0 (.) (.4) 65. (9.6) 67. (0.4) (.4) 5. (.) 59.5 (7.0) 50 (5.4) 65. (9.6) 69.4 (.5) 69. (.4) 65. (9.5) 56.4 (5.6) 50 (5.4) 57.7 (6.) 65.4 (9.7) 64.9 (9.4) 50 (5.4) 44.4 (0.) 5.6 (4.) 58.9 (6.7) (8.50) 6.5 (7.9) 67. (0.5) 67.7 (0.7) 6.8 (8.9) 54.8 (4.9) (8.50) 49.7 (.5) 6.9 (9.0) 6.7 (8.9). (7.4) 5. (.7) (8.50).6 (8.4) 48.9 (.) 70 (.59) 5. (.7) 65.5 (9.7) 66. (0.0) 6.6 (8.4) 5. (4.) 70 (.59) 4.9 (9.9).5 (7.4) 6.6 (8.4) 59. (6.9) 50.6 (.0) 70 (.59) 9. (7.8) (4.67) 45.5 (0.6) 6.6 (8.4).5 (7.4) 58. (6.4) 5.7 (.5) (4.67).6 (8.4) 54.9 (4.9) 6. (7.7) 58.4 (6.5) 49. (.) 90 (7.76) 5.7 (4.4) 5.5 (.4) 49. (.) 48. (.9) 90 (7.76) 50. (.8) 5.0 (.6) 49.9 (.6) 00 (0.84) 46.8 (.) 44.6 (0.) 4. (9.) 4. (8.6) 00 (0.84) 46.6 (.) 45.0 (0.4) 0 (.9) 4. (8.7) 9. (7.8) 7. (6.8) 6.0 (6.) 0 (.9) 4. (8.7) 0 (7.0) 6.9 (6.7) 4.7 (5.7).5 (4.7). (4.) 0 (7.0) 0 (.09).0 (5.0) 0.9 (4.0) 8.6 (.0) 7.5 (.5) 0 (.09) (4.8) 9.8 (.5) 7.7 (.6) 5.4 (.5) 4. (.0) 50 (46.6) 4.9 (.).6 (0.) (49.4).5 (0.) 70 (5.4) (55.5) (74.0) 70 (8.7) (8.50) 0 (7.0) (55.5) (74.0) 70 (8.7) Load Radius ft (m) Main Boom Length ft (m) (8.50) 0 (7.0) Load Radius ft (m) Main Boom Length ft (m) Load Radius ft (m) (8.50) 0 (7.0) (55.5) (74.0) 70 (8.7) 54.6 (4.8) 57.8 (6.) 47.8 (.7) 45.0 (0.4) 50.9 (.) 55.0 (4.9) 46. (.0) (4.67) 4.9 (9.0) 47.8 (.7) 5.0 (.6) 44.9 (0.4) 47.6 (.6) 90 (7.76).5 (8.4) 45. (0.5) 49.4 (.4) 4.6 (9.8) 4.8 (9.4) 4.8 (9.0) 00 (0.84). (8.) 4.8 (9.4) 4.4 (9.7) 4.4 (9.) 9.6 (8.0) 7.6 (7.) 6.6 (6.6) 0 (.9) 8.5 (7.5).0 (8.) 8. (7.) 7. (6.8) 6.9 (6.7) 5.0 (5.9).9 (4.9).9 (4.5) 0 (7.0) 5. (6.0). (5.).4 (4.7).0 (5.0). (4.) 9.0 (.) 8.0 (.7) 0 (.09).4 (4.) 9.4 (.) 8.4 (.9) (4.8) 7.9 (.7) 5.7 (.7) 4.7 (.) (4.8) 8. (.7) 6.0 (.8) 5.0 (.).4 (9.7) 50 (46.6) 5.0 (.).9 (0.4).8 (9.9) 50 (46.6) 5. (.4). (0.5). (0.) 0. (9.) 9.0 (8.6) (49.4).6 (0.) 0.4 (9.) 9.4 (8.8) (49.4).8 (0.) 0.7 (9.4) 9.7 (8.9) 0.4 (9.) 7.8 (8.) 6.9 (7.7) 70 (5.4) 0.5 (9.) 8. (8.) 7. (7.8) 70 (5.4) 8.4 (8.) 7.5 (7.9) (55.5) 8.5 (8.4) 5.7 (7.) 5.0 (6.8) (55.5) 8.6 (8.4) 5.9 (7.) 5. (6.9) (55.5) 6. (7.) 5.5 (7.0) 90 (58.) 6.9 (7.7).8 (6.). (6.0) 90 (58.) 4.0 (6.4).6 (6.) 90 (58.) 4. (6.4).8 (6.) 00 (6.68). (5.5).8 (5.4) 00 (6.68). (5.5). (5.5) 00 (6.68).4 (5.6). (5.6) 0 (64.76) 0.6 (4.8) 0.5 (4.8) 0 (64.76) 0.7 (4.9) 0.7 (4.9) 0 (64.76) 0.9 (4.9) 0 (67.85) 9. (4.) 9. (4.) 0 (67.85) 9. (4.) 9.5 (4.) 0 (67.85) 9.6 (4.4) 0 (70.9) 7.9 (.6) 8. (.7) 0 (70.9) 7.9 (.6) 8.4 (.8) 0 (70.9) (74.0) 6.6 (.0) 7. (.) (74.0) 7. (.) (74.0) 50 (77.0) 5.5 (.5) 6. (.8) 50 (77.0) 6. (.8) 50 (77.0) (.8) 5. (.) (.8) (.8) 70 (8.7) 4. (.9) 70 (8.7) 70 (8.7) 0 (6.7) This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.

33 9 565 (supersedes 5)-09-P ft (8.50m) Offset Jib Length - _ Rotation - ABCDE + A [,000 +,000 lb ( kg)] Counterweight [All capacities are listed in kips (mt)] 5 Offset 5 Offset Main Boom Length ft (m) 5 Offset (8.50) 0 (9.5) 8.7 (7.6) 0 (9.5) 0 (9.5) 5 (0.79) 7.5 (7.0) 5 (0.79) 5 (0.79) (.4) 6.4 (6.5) 7.7 (7.) 50 (5.4) 4.4 (5.6) 6. (6.5) 6. (6.5) (8.50).7 (4.8) 5.0 (5.9) 5.4 (6.) 4. (5.5) 70 (.59). (4.).8 (5.) 4.4 (5.6) (4.67) 9.9 (.6).7 (4.8) 90 (7.76) 7.4 (.4) 00 (0.84) 0 (.9) 0 (7.0) (55.5) (74.0) 70 (8.7) Load Radius ft (m) Main Boom Length ft (m) Load Radius ft (m) (8.50) 0 (7.0) (55.5) (74.0) (.4) 4. (5.6) 50 (5.4).7 (4.8).7 (5.). (5.0) (8.50). (4.).6 (4.8).7 (4.8).5 (5.).5 (4.7) 70 (.59) 9.4 (.).6 (4.).9 (4.5). (4.).6 (5.).8 (4.9).8 (4.4) (4.67) 6. (.8) 0.8 (4.0). (4.).7 (4.4).8 (4.9). (4.6). (4.) 90 (7.76).5 (0.7) 0.0 (.6) 4.4 (.) 0.8 (4.0).0 (4.5).6 (4.) 0.7 (.9) 00 (0.84).4 (9.7). (0.0) 9.9 (.6). (4.).0 (4.) 0. (.7) 0 (.9) 9.8 (9.0) 0 (7.0) 9. (.) 0.6 (.9) 0.4 (.8) 9.6 (.4) 0 (.09) 7. (.4) 0.0 (.6) 9. (.) (4.8) 5. (.5) 8. (.8) 50 (46.6).6 (0.7) (49.4) 70 (5.4) 70 (8.7) Load Radius ft (m) Main Boom Length ft (m) (8.50) 0 (7.0) (55.5) (74.0) 70 (8.7) (.4) 50 (5.4) 0.0 (.6) (8.50) 6.5 (.0) 0.0 (.6) 0. (.7) 70 (.59).7 (0.8) 7.7 (.6) 9.9 (.6) 0.5 (.8) 9.7 (.5) (4.67).4 (9.7) 5.6 (.6) 8. (.8) 8.7 (.0) 6.7 (.) 0.6 (.9) 0.0 (.6) 9. (.) 90 (7.76) 9.6 (8.9).8 (0.8) 6.6 (.) 8. (.8) 6. (.9) 8. (.8) 0.0 (.6) 9.5 (.4) 8.7 (.0) 00 (0.84) 8. (8.). (0.) 5. (.4) 7. (.) 5.9 (.7) 6. (.8) 9.4 (.) 9.0 (.) 8. (.8) 0 (.9) 0.9 (9.5).7 (0.8) 5.9 (.7) 5.5 (.6) 0 (7.0) 4.4 (.) 8.9 (.) 8.6 (.0) 7.8 (.6) 0 (7.0) 9.8 (9.0).6 (0.) 4.7 (.) 5. (.4) 8. (.8) 0 (.09).9 (0.4) 7.6 (.5) 8. (.7) 7.4 (.4) 0 (.09) 8.8 (8.5).5 (9.8).7 (0.8) 4.6 (.) 6.0 (.8) 4.9 (.) (4.8).6 (9.8) 6. (.8) 6.8 (.) 5.8 (.7) (4.8) 8.0 (8.) 0.6 (9.).7 (0.).6 (0.7) 5.5 (.6). (0.5). (0.0) 50 (46.6) 0.4 (9.) 4.8 (.).9 (0.8).9 (0.4) 50 (46.6) 9.8 (9.0).9 (9.9).8 (0.). (0.0). (0.5) 0.8 (9.4) 9.6 (8.9) (49.4) 9.5 (8.8).5 (0.7).4 (9.7) 0.4 (9.) (49.4) 9. (8.7). (9.6).0 (9.5) 0.9 (9.5).0 (9.5) 8.6 (8.4) 7.5 (7.9) 70 (5.4). (9.7) 9. (8.7) 8. (8.) 70 (5.4) 8.5 (8.4) 9.7 (8.9) 8.8 (8.5) (55.5) 9. (8.7) 6.4 (7.4) 5.6 (7.) (55.5) 9.4 (8.8) 7.0 (7.7) 6. (7.) (55.5) 7.9 (8.) 7.6 (8.0) 6.8 (7.6) 90 (58.) 7.5 (7.9) 4.6 (6.6).9 (6.) 90 (58.) 7.7 (8.0) 5. (6.8) 4.5 (6.6) 90 (58.) 5.6 (7.) 5.0 (6.8) 00 (6.68) 6.0 (7.).9 (5.9).4 (5.6) 00 (6.68) 6. (7.). (6.0).9 (5.9) 00 (6.68).8 (6.).4 (6.) 0 (64.76) 4.6 (6.6). (5.). (5.0) 0 (64.76) 4.8 (6.7).8 (5.4).6 (5.) 0 (64.76). (5.5).0 (5.4) 0 (67.85). (5.9) 9.9 (4.5) 9.7 (4.4) 0 (67.85) 0. (4.7) 0. (4.6) 0 (67.85) 0.7 (4.9) 0.6 (4.8) 0 (70.9) 8.7 (.9) 8.5 (.9) 0 (70.9) 9.0 (4.) 8.9 (4.0) 0 (70.9) 9. (4.) 9. (4.) (74.0) 7.5 (.4) 7.4 (.4) (74.0) 7.8 (.5) 7.7 (.5) (74.0) 8. (.7) 50 (77.0) 6.4 (.9) 6. (.9) 50 (77.0) 6.6 (.0) 6.7 (.0) 50 (77.0) 6.9 (.) (.8) 5.4 (.4) 5.4 (.4) (.8) 5.7 (.6) (.8) 70 (8.7) 4.5 (.0) 4.5 (.0) 70 (8.7) 4.8 (.) 70 (8.7) (86.5).6 (.6).7 (.7) (86.5).9 (.8) (86.5) 90 (89.44).9 (.) 90 (89.44) 90 (89.44) 00 (9.5). (.0) 00 (9.5) 00 (9.5) This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.

34 0 565 (supersedes 5)-09-P 90 ft (7.76m) Offset Jib Length - _ Rotation - ABCDE + A [,000 +,000 lb ( kg)] Counterweight [All capacities are listed in kips (mt)] 5 Offset 5 Offset Main Boom Length ft (m) 5 Offset (8.50) 5 (0.79).8 (0.8) 5 (0.79) 5 (0.79) (.4).6 (0.7) (.4) (.4) 50 (5.4).4 (0.).9 (0.4) (8.50). (9.7). (0.).0 (0.0).0 (9.5) 70 (.59) 0. (9.).5 (9.8).8 (9.9) 0.8 (9.4) (4.67) 9. (8.8) 0.8 (9.4). (9.7) 90 (7.76) 8. (8.) 0. (9.) 00 (0.84) 7. (7.8) 0 (.9) 0 (7.0) (55.5) (74.0) 70 (8.7) Load Radius ft (m) Main Boom Length ft (m) Load Radius ft (m) (8.50) 0 (7.0) (55.5) (74.0) 50 (5.4). (9.6) (8.50) 0. (9.) 0.7 (9.4) 0. (9.) 70 (.59) 9. (8.8) 0.0 (9.) 0. (9.) 0.6 (9.) 9.9 (9.0) (4.67) 8. (8.) 9.4 (8.8) 9.6 (8.9) 9.4 (8.8) 0.7 (9.4) 0.4 (9.) 9.8 (9.0) 90 (7.76) 7. (7.8) 8.8 (8.5) 9. (8.7) 9.4 (8.8) 0. (9.) 0. (9.) 9.6 (8.9) 00 (0.84) 6.0 (7.) 8. (8.) 6. (7.) 8.8 (8.5) 9.7 (8.9) 9.8 (9.0) 9.4 (8.8) 0 (.9) 4.6 (6.6) 0 (7.0) 5. (6.9) 8. (8.) 9. (8.7) 9. (8.8) 9. (8.7) 0 (7.0) 0 (.09) 4.0 (6.4) 7. (7.8) 8.7 (8.5) 9.0 (8.6) 8.8 (8.5) (4.8).0 (5.9) 6.7 (7.6) 8. (8.) 8.6 (8.4) 50 (46.6) 6.0 (7.) 7.8 (8.) (49.4) 5.4 (7.0) 70 (5.4) 70 (8.7) Load Radius ft (m) Main Boom Length ft (m) (8.50) 0 (7.0) (55.5) (74.0) 70 (8.7) 50 (5.4) (8.50) 70 (.59) 7.8 (8.) 9. (8.7) (4.67) 6.0 (7.) 8.0 (8.) 7.8 (8.) 9.0 (8.6) 8.7 (8.5) 90 (7.76) 4.5 (6.6) 6.6 (7.5) 7.7 (8.0) 6.6 (7.5) 8.7 (8.5) 8.6 (8.4) 8. (8.) 00 (0.84). (6.0) 5.5 (7.0) 6.9 (7.7) 6.0 (7.) 4.9 (6.8) 7.4 (7.9) 8. (8.) 8. (8.) 8.0 (8.) 0 (.9). (5.6) 4.5 (6.6) 6.0 (7.) 5.9 (7.) 4.8 (6.7).4 (6.) 6.7 (7.6) 7.8 (8.) 7.9 (8.) 7.7 (8.0) 0 (7.0).4 (5.).6 (6.) 5. (6.8) 5.8 (7.) 4.7 (6.7) 0 (.09).5 (5.7) 5.9 (7.) 7. (7.8) 7.6 (8.0) 7.4 (7.9) 0 (.09) 0.7 (4.9).8 (5.8) 4.4 (6.5) 5.5 (7.0) 4.6 (6.6) 8.4 (8.) (4.8).7 (5.) 4.9 (6.8) 6.8 (7.6) 7. (7.8) 7. (7.8) (4.8). (5.5).7 (6.) 4.8 (6.7) 4.5 (6.6) 8. (8.) 8. (8.) 50 (46.6) 4. (6.4) 6. (7.4) 6.9 (7.7) 6.8 (7.6) 50 (46.6).6 (5.). (5.9) 4. (6.4) 4.4 (6.5) 7. (7.8) 7.9 (8.) 7.8 (8.) (49.4). (6.0) 5.8 (7.) 6.5 (7.5) 6.5 (7.5) (49.4). (5.0).5 (5.7).7 (6.) 4. (6.4) 4.6 (6.6) 6.7 (7.6) 7.6 (8.0) 7.5 (7.9) 70 (5.4).6 (5.7) 5.0 (6.8) 6. (7.) 6. (7.) 70 (5.4) 0.6 (4.8).0 (5.4). (6.0).7 (6.) (55.5).8 (6.) 6. (7.) 6.9 (7.7) 6. (7.) (55.5). (5.5) 4. (6.5) 5.8 (7.) 5.9 (7.) (55.5).6 (5.).7 (5.8). (6.0) 90 (58.).0 (5.9) 5.8 (7.) 5.0 (6.8) 4.4 (6.5) 90 (58.).7 (6.) 5. (6.8) 5. (6.9) 90 (58.). (5.). (5.6).8 (5.8) 00 (6.68) 5. (6.9). (6.0).8 (5.8) 00 (6.68). (6.0) 4. (6.4).6 (6.) 00 (6.68) 0.9 (4.9).9 (5.4).4 (5.6) 0 (64.76) 4.9 (6.8).8 (5.4).4 (5.) 0 (64.76).7 (5.8).5 (5.7). (5.5) 0 (64.76) 0.6 (4.8).6 (5.).0 (5.4) 0 (67.85).8 (6.) 0.4 (4.7) 0.0 (4.5) 0 (67.85). (5.5). (5.0) 0.8 (4.9) 0 (67.85). (5.).5 (5.) 0 (70.9).5 (5.7) 9. (4.) 8.8 (4.0) 0 (70.9).8 (5.4) 9.8 (4.4) 9.5 (4.) 0 (70.9) 0.4 (4.7) 0. (4.6) (74.0). (5.) 8.0 (.6) 7.6 (.4) (74.0) 8.6 (.9) 8. (.8) (74.0) 9. (4.) 8.9 (4.0) 50 (77.0) 0. (4.6) 6.9 (.) 6.5 (.9) 50 (77.0) 7.4 (.4) 7. (.) 50 (77.0) 7.9 (.6) 7.7 (.5) (.8) 5.9 (.7) 5.6 (.5) (.8) 6.4 (.9) 6. (.8) (.8) 6.8 (.) 6.6 (.0) 70 (8.7) 5.0 (.) 4.7 (.) 70 (8.7) 5.4 (.4) 5. (.4) 70 (8.7) 5.6 (.5) (86.5) 4. (.9).9 (.8) (86.5) 4.5 (.0) 4. (.0) (86.5) 4.7 (.) 90 (89.44).4 (.5). (.4) 90 (89.44).5 (.6) 90 (89.44) 00 (9.5).6 (.).4 (.) 00 (9.5).8 (.) 00 (9.5) This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.

35 565 (supersedes 5)-09-P This Page Intentionally Blank

36 5 (supersedes 5487)-09-P Link Belt Construction Equipment Company Lexington, Kentucky Link Belt is a registered trademark. Copyright 0. We are constantly improving our products and therefore reserve the right to change designs and specifications. Powered by TCPDF (

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5668)-0115-P Ton ( metric ton)

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5668)-0115-P Ton ( metric ton) 1 5713 (supersedes 5668)-0115-P3 Technical Data Specifications & Capacities SL Crawler Crane 250 Ton (226. metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to

More information

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5776)-1217-U Ton ( metric ton)

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5776)-1217-U Ton ( metric ton) 1 Technical Data Specifications & Capacities HSL Crawler Crane 250 Ton (226.80 metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and

More information

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5762)-1016-U Ton ( metric ton)

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5762)-1016-U Ton ( metric ton) 5776 (supersedes 576)-06-U Technical Data Specifications & Capacities HSL Crawler Crane 50 Ton (6.80 metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to in-cab

More information

PRELIMINARY. 230 ton (208.6 mt) Lattice Crawler Crane ENGINE DRUMS LOWER COUNTERWEIGHTS BOOM HOIST ATTACHMENT

PRELIMINARY. 230 ton (208.6 mt) Lattice Crawler Crane ENGINE DRUMS LOWER COUNTERWEIGHTS BOOM HOIST ATTACHMENT ENGINE Mitsubishi 6-cylinder M670-T3 365 hp ydraulic system consists of 7 pumps ydraulic pilot-operated control valves Remote hydraulic oil cooler Full fl ow fi ltration 230 ton (208.6 mt) Lattice Crawler

More information

Technical Data. Specifications & Capacities. HSL Crawler Crane. View thousands of Crane Specifications on FreeCraneSpecs.com

Technical Data. Specifications & Capacities. HSL Crawler Crane. View thousands of Crane Specifications on FreeCraneSpecs.com 1 Technical Data Specifications & Capacities HSL Crawler Crane Ton (72.6 metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's

More information

PRELIMINARY. 45 ton (40.8 mt) Telescopic Crawler Crane STANDARD FEATURES:

PRELIMINARY. 45 ton (40.8 mt) Telescopic Crawler Crane STANDARD FEATURES: PRELIMINARY 45 ton (40.8 mt) Telescopic Crawler Crane STANDARD FEATURES: 33 ft to 105 ft (10.06 m to 32.00 m) full power main boom 197 hp Tier 3 Isuzu 4HK-T3 Main drum available line pull - 19,108 lbs

More information

Technical Data. Specifications & Capacities. HSL Crawler Crane 80 Ton (72.6 metric ton) P8

Technical Data. Specifications & Capacities. HSL Crawler Crane 80 Ton (72.6 metric ton) P8 1 Technical Data Specifications & Capacities HSL Crawler Crane Ton (72.6 metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to in--- cab Crane Rating Manual and

More information

Working Weights. Assembly Diagram. Ctwt ABC+A

Working Weights. Assembly Diagram. Ctwt ABC+A 14 5487--- 0607--- P3 Assembly Diagram Link--Belt Working Weights Ctwt AB+A Ctwt ABC+A Ctwt ABCDE + A lb (kg) lb (kg) lb (kg) 315,532 (143 125) 340,377 (154 395) 390,069 (176 935) psi 9.8 10.6 12.2 kg/cm2

More information

250 ton (226.8 mt) Lattice Crawler Crane

250 ton (226.8 mt) Lattice Crawler Crane 250 ton (226.8 mt) Lattice Crawler Crane 365 hp Tier III Engine Transport weight is 87,100lbs with carbody, live mast with self assemble cylinder, and hoist rope HSL counterweight removal system, lowers

More information

Lattice Boom Crawler Crane 80 ton (72.6 mt)

Lattice Boom Crawler Crane 80 ton (72.6 mt) Lattice Boom Crawler Crane 80 ton (72.6 mt) Cutting Edge winch package with wet brake design and matching front & rear drums (line pull) 3-piece counterweight system, designed with innovative counterweight

More information

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5775)-0917-T Ton (117.9 metric ton)

Technical Data. Specifications & Capacities. HSL Crawler Crane (supersedes 5775)-0917-T Ton (117.9 metric ton) 1 Technical Data Specifications & Capacities S Crawler Crane 130 Ton (117.9 metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and

More information

LS 138H II. 80 ton (72.57 metric ton) Lattice Boom Crawler Crane. Website: Cranes101.com Phone:

LS 138H II. 80 ton (72.57 metric ton) Lattice Boom Crawler Crane. Website: Cranes101.com   Phone: Lattice Boom Crawler Crane 80 ton (72.57 metric ton) II Litho in USA 3/02 #5349 (supersedes #5296) Machine Transport Weights approximate 11 6 (3.54 m) Catwalks Folded 10 6 (3.19 m) Cab Width 11 6 (3.51

More information

Technical Data. Specifications & Capacities. Telescopic Crawler Crane S5. 50 Ton (51mt Export Machine)

Technical Data. Specifications & Capacities. Telescopic Crawler Crane S5. 50 Ton (51mt Export Machine) 1 5646-0314-S5 Technical Data Specifications & Capacities Telescopic Crawler Crane Ton (51mt Export Machine) CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane

More information

Technical Data. Specifications & Capacities. Telescopic Crawler Crane (supersedes 5704)-1015-S Ton (100 metric ton)

Technical Data. Specifications & Capacities. Telescopic Crawler Crane (supersedes 5704)-1015-S Ton (100 metric ton) 1 Technical Data Specifications & Capacities Telescopic Crawler Crane 110 Ton (100 metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual

More information

Specifications LS-248H II. 200-Ton ( metric ton) Hydraulic Lattice Boom Crawler Crane

Specifications LS-248H II. 200-Ton ( metric ton) Hydraulic Lattice Boom Crawler Crane Specifications Hydraulic Lattice Boom Crawler Crane LS-248H II 200-Ton (181.50 metric ton) Shown with side frame auxiliary counterweights. Not to Scale General dimensions feet meters Basic boom length

More information

Specifications Hydraulic Lattice Boom Crawler Crane LS-138H. 75-Ton (68 metric ton) General dimensions Feet meters. General dimensions Feet meters

Specifications Hydraulic Lattice Boom Crawler Crane LS-138H. 75-Ton (68 metric ton) General dimensions Feet meters. General dimensions Feet meters Specifications Hydraulic Lattice Boom Crawler Crane LS-138H 75-Ton (68 metric ton) General dimensions Feet meters General dimensions Feet meters Basic boom length 40' 0" 12.20 Overall width side frames

More information

Technical Data. Specifications & Capacities. Telescopic Crawler Crane (supersedes 5623)-1114-R8. 75 Ton (70 metric ton)

Technical Data. Specifications & Capacities. Telescopic Crawler Crane (supersedes 5623)-1114-R8. 75 Ton (70 metric ton) 1 5706 (supersedes 5623)-1114-R8 Technical Data Specifications & Capacities Telescopic Crawler Crane Ton (70 metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to

More information

Off the truck and ready for work! Transports in one load with counterweights

Off the truck and ready for work! Transports in one load with counterweights -ton (51 mt) Telescopic Crawler Crane Off the truck and ready for work! Transports in one load with counterweights 115' 6" (35.2m) maximum main boom tip height Four section, full power boom Remarkable

More information

CONSTRUCTION EQUIPMENT LS-238H HYLAB. 150-ton (136 t) Hydraulic Lattice Boom Crawler Crane. Superior Crawler Crane Transportability!

CONSTRUCTION EQUIPMENT LS-238H HYLAB. 150-ton (136 t) Hydraulic Lattice Boom Crawler Crane. Superior Crawler Crane Transportability! R CONSTRUCTION EQUIPMENT HYLAB 150-ton (136 t) Hydraulic Lattice Boom Crawler Crane Superior Crawler Crane Transportability! Dependable Hydraulic Control System No Electronics Maximum Transportability

More information

HC-278H II. HYLAB Series. Lattice Boom Truck Crane 300-ton (272 mt)

HC-278H II. HYLAB Series. Lattice Boom Truck Crane 300-ton (272 mt) HC-278H II HYLAB Series Lattice Truck Crane 300-ton (272 mt) 300 tons (272 mt) at a 10' (3.05 m) radius 60' to 330' (18.29-100.58 m) of tube boom 300' + 100' (91.4 + 30.5 m) boom plus jib combination 403.8'

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE consolidatedcrane.com Houston, TX 713.641.3330 Max. Lift Capacity: 500,000 lbs Max. Length: 300 ft Max. + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500-II CRAWLER CRANE

More information

HYDRAULIC CRAWLER CRANE CK2500

HYDRAULIC CRAWLER CRANE CK2500 HYDRAULIC CRAWLER CRANE CK2500 WITH OPTIONAL JIB Max. Lifting Capacity: 250 US Tons Max. Boom Length: 300 ft Max. Boom + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500 CRAWLER CRANE The Kobelco

More information

model PROVISIONAL product guide features contents 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment

model PROVISIONAL product guide features contents 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment features 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment 89 m (292') Heavy-Lift Boom 98,4 m (323') Fixed Jib on Heavy-Lift Boom 113,8 m (373') Luffing Jib on Heavy-Lift Boom 253

More information

LINK-BELT MODEL 238H5-150 TON CAPACITY

LINK-BELT MODEL 238H5-150 TON CAPACITY TRANSPORTATION SPECS - Crawler Cranes INK-BET MODE 2385-150 TON CAPACITY COMPONENT EIGTS BS. KGS. Boom 70 (1.78m) x 62 (1.57m) Min 50 to Max 260 Complete Crane c/w 50 boom 287,717 130 508 OD (tubular)

More information

110 ton (100 mt) Telescopic Crawler Crane

110 ton (100 mt) Telescopic Crawler Crane 110 ton (100 mt) Telescopic Crawler Crane 150' (45.7 m) main boom 159' (48.6m) main boom tip height Five section full power boom Remarkable control, reliability & capacity performance Unbeatable hydraulic

More information

LS 278H. 250 ton (227 metric ton) Hydraulic Lattice Boom Crawler Crane. Tube Boom Capacities ft. ( m)

LS 278H. 250 ton (227 metric ton) Hydraulic Lattice Boom Crawler Crane. Tube Boom Capacities ft. ( m) Hydraulic Lattice Crawler Crane Tube Capacities 60 330 ft. (18.29 100.58 m) 250 ton (227 metric ton) 35 ft. (10.67 m) Live Mast Capacities On Outrigger Jacks On Side Frames 10 ft. (3.05 m) Extension Lifting

More information

6010LP 30 Ton Telescopic Boom Crawler Crane

6010LP 30 Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY BOOM 30 ton at 10 feet (27t at 3.0m) 3-section, 32 8 80 0 (9.9 m 24.4 m) DIMENSION Overall Length 41 1 (12.52 m) Overall Width (tracks extended) 13 6 (4.12 m) Overall Width

More information

Max. Lifting Capacity: 100 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 190 ft + 60 ft

Max. Lifting Capacity: 100 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 190 ft + 60 ft HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 100 US Tons Max. Length: 200 ft Max. + Jib Length: 190 ft + 60 ft SPECIFICATIONS FOR CK1000-III CRAWLER CRANE The Kobelco CK1000-III Crawler Crane is designed

More information

conventional crane 300 tons

conventional crane 300 tons conventional crane 300 tons link-belt hc-278hii OOM LENGTHS: 60 to 300 ft JI LENGTHS: 30 to 100 ft JI OFFSETS: 5-15 - 25 NOTES: Technical Data Specifications & Tube Capacities HC -278H II Truck Crane 300

More information

rough Terrain crane 130 tons

rough Terrain crane 130 tons rough Terrain crane 130 tons link-belt rtc-80130ii BOOM LENGTHS: 41 to 162 ft JIB LENGTHS: 31 to 109 ft JIB OFFSETS: 2-15 - 30-45 NOTES: Technical Data Specifications & Capacities 130 US ton 120 metric

More information

Ton Telescopic Boom Crawler Crane

Ton Telescopic Boom Crawler Crane 45 Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY BOOM 45 ton at feet (40t at 3.0m) 4-section, 34 0 5 0 (.4 m 32 m) DIMENSION Overall Length 43 7 (13.29 m) Overall Width (tracks extended)

More information

Ton Telescopic Boom Crawler Crane

Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY BOOM 77 ton at 10 feet (70t at 3.0m) 4-section, 37 6 111 6 (11.4 m 34.0 m) DIMENSION Overall Length 48 3 (14.94 m) Overall Width (tracks extended) 18 8 (5.69 m) Overall Width

More information

17' 9" (1.00m) TAILSWING CTWT. "AB" (5.41m) 12' 6-5/ 8 " (.60m) (5.12m) HC-248H. (215mm) (210mm) 23' 6" (7.16m) 9' 6" (2.90m) (11.

17' 9 (1.00m) TAILSWING CTWT. AB (5.41m) 12' 6-5/ 8  (.60m) (5.12m) HC-248H. (215mm) (210mm) 23' 6 (7.16m) 9' 6 (2.90m) (11. Specifications Hydraulic Lattice Boom Truck Crane HC-248H CENTERLINE OF ROTATION 200-Ton (181.50 metric ton) 3' 3-3/ 8 " 17' 9" (1.00m) (5.41m) TAILSWING CTWT. "AB" 1' 11-5/ 8 " (.60m) 16' 9-9/ 16 " TAILSWING

More information

model 555 product guide features contents 136 mton (150 ton) Capacity Specifications mton-m (3,900 ft-kips) Maximum Load Moment

model 555 product guide features contents 136 mton (150 ton) Capacity Specifications mton-m (3,900 ft-kips) Maximum Load Moment product guide features 36 mton (50 ton) Capacity 539 mton-m (3,900 ft-kips) Maximum oad Moment 76, m (50') eavy-ift 85,3 m (80') Fixed Jib on eavy-ift 00,6 m (330') uffing Jib 53 kw (340 P) engine 8,9

More information

For Sales Use Only! HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER. not for crane operations

For Sales Use Only! HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER. not for crane operations HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER For Replacement, Order Part Number: L8P0001 (022603) Link Belt is a registered trademark. Page Contents 3 Operating Instructions

More information

RTC 8050 Series II. 50 ton (45.36 metric tons) Telescopic Boom Rough Terrain Crane

RTC 8050 Series II. 50 ton (45.36 metric tons) Telescopic Boom Rough Terrain Crane Telescopic Boom Rough Terrain Crane RTC 85 Series II 5 ton (45.36 metric tons) Boom and Fly Capacities for this machine are listed by the following sections. Working Range Diagram 35.5 to 6.3 (1.82 18.38

More information

LINK-BELT MODEL 218HSL TON CAPACITY

LINK-BELT MODEL 218HSL TON CAPACITY TRANSPORTATION SPECS - Crawler Cranes INK-BET MODE 218S - 110 TON CAPACITY COMPONENT EIGTS BS. KGS. Complete Crane c/w 40, full Cwt and Block 190,058 86,210 BOOM 60 (1.52m) X 50 (1.72m) Min 40 to Max 230

More information

LS---208HII. Technical Data. Specifications & Tube Boom Capacities. Crawler Crane 80 Ton (72.57 metric ton)

LS---208HII. Technical Data. Specifications & Tube Boom Capacities. Crawler Crane 80 Ton (72.57 metric ton) 1 5436---25---H8 Technical Data Specifications & Tube Capacities LS -28H II Crawler Crane 8 Ton (72.57 metric ton) CUTION: This material is supplied for reference use only. Operator must refer to in---

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : CKE1350G-2 Max. Lifting Capacity : 150 t x 4.4 m * Max. Lifting Capacity With Luffing Jib: 36.0 t x 12.0 m Max. Crane oom Length : 76.2 m Max. Luffing oom Length: 47.9 m

More information

10010Mx 50 Ton Telescopic Boom Crawler Crane

10010Mx 50 Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY BOOM 50 ton at 10 feet (45t at 3.0m) 4-section, 37 6 111 6 (11.4 m 34 m) DIMENSION Overall Length 47 4 (14.43 m) Overall Width (tracks extended) 18 4 (5.59 m) Overall Width

More information

LS 138H II. 80 ton (72.57 metric ton) Lattice Boom Crawler Crane. Tube Boom Capacities ( m)

LS 138H II. 80 ton (72.57 metric ton) Lattice Boom Crawler Crane. Tube Boom Capacities ( m) Lattice Crawler Crane 8 ton (72.57 metric ton) Tube Capacities 4 2 (12.19 6.96 m) 24 (7.31 m) Live Mast / 2 (6.1 m) Base Section / 5 (1.52m) Tip Extension Duty Cycle Capacities 4 7 (12.19 21.34 m) Tube

More information

HC 50. Hydraulic Crawler Crane. simple, available and cost effective FEATURES

HC 50. Hydraulic Crawler Crane. simple, available and cost effective FEATURES HC 50 Hydraulic Crawler Crane FEATURES 50 tons (45.4 mt) max lift capacity 160 ft. (48.8 m) max lift crane boom length 130+40 ft. (39.6+12.2 m) max lift crane boom & jib length Power up/down and freefall

More information

truck crane 140 tons link-belt htc-3140lb BOOM LENGTHS: 42 to 195 ft JIB LENGTHS: 38 to 109 ft JIB OFFSETS:

truck crane 140 tons link-belt htc-3140lb BOOM LENGTHS: 42 to 195 ft JIB LENGTHS: 38 to 109 ft JIB OFFSETS: truck crane 140 tons link-belt htc-3140lb BOOM LENGTHS: 42 to 195 ft JIB LENGTHS: 38 to 109 ft JIB OFFSETS: 2-15 - 30-45 NOTES: Technical Data Specifications & Capacities Telescopic Boom Truck Crane 140

More information

HC 80. Hydraulic Crawler Crane. simple, available and cost effective FEATURES

HC 80. Hydraulic Crawler Crane. simple, available and cost effective FEATURES HC 80 Hydraulic Crawler Crane FEATURES 80 tons (73 mt) max lift capacity 200 ft. (61 m) max lift crane boom length 170+60 ft. (52+18 m) max lift crane boom & jib length 240 ft. (73 m) max boom & luffing

More information

Manitowoc Product Guide. Features. View thousands of Crane Specifications on FreeCraneSpecs.com

Manitowoc Product Guide. Features. View thousands of Crane Specifications on FreeCraneSpecs.com Manitowoc 000 Product Guide Features 750 t (5 USt) capacity No. 55A boom with MAX-ER 00 t (0 USt) capacity No. 55 boom 9 09 mton-m (5,505 ft-kips) maximum load moment with MAX-ER 97,5 m (30 ft) No. 55

More information

77 Ton Tele-Boom Crawler Crane. mantiscranes.com

77 Ton Tele-Boom Crawler Crane. mantiscranes.com 15010 77 Ton Tele-Boom Crawler Crane mantiscranes.com VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel

More information

American hc230 Crawler Crane 230 ton Lifting Capacity. American hc230 HYDRAULIC CRAWLER CRANE

American hc230 Crawler Crane 230 ton Lifting Capacity. American hc230 HYDRAULIC CRAWLER CRANE American hc230 Crawler Crane 230 ton Lifting Capacity American hc230 HIGHLIGHTS HIGHLIGHTS 230 tons (208.7 mt) maximum lifting capacity Increased capacity at working radii with optional CTWT Plus package

More information

RTC Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 65 ton (58.9 metric ton) D7

RTC Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 65 ton (58.9 metric ton) D7 5448---0205---D7 1 Technical Data Specifications & Capacities RTC -8065 Telescopic Boom Rough Terrain Crane 65 ton (58.9 metric ton) CAUTION: This material is supplied for reference use only. Operator

More information

Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 75 ton (68.0 metric ton)

Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 75 ton (68.0 metric ton) 5513 (supersedes 5510)--- 1207--- D7 1 Technical Data Specifications & Capacities Telescopic Boom Rough Terrain Crane 75 ton (68.0 metric ton) CAUTION: This material is supplied for reference use only.

More information

LS-308H II. HYLAB Series. Lattice Boom Crawler Crane

LS-308H II. HYLAB Series. Lattice Boom Crawler Crane LS-308H II HYLAB Series Lattice Boom Crawler Crane 110-ton (99.79 mt) 110-ton (99.79 mt) at 12' (3.66 m) radius Powerhouse package: - 1-1/8" wire rope, front & rear drums - 37,100 lbs (16 828 kg) allowable

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : CKE2500G Max. Lifting Capacity : 250 t x 4.6 m Max. Lifting Capacity With Luffing Jib: 80 t x 9.8 m Max. Crane Boom Length : 91.4 m Max. Luffing Boom Length: 61.0 m Max.

More information

HC 60. Hydraulic Crawler Crane. simple, available and cost effective FEATURES

HC 60. Hydraulic Crawler Crane. simple, available and cost effective FEATURES HC 60 Hydraulic Crawler Crane FEATURES 60 tons (54.4 mt) max lift capacity 160 ft. (48.8 m) max lift crane boom length 130+40 ft. (39.6+12.2 m) max lift crane boom & jib length Power up/down and freefall

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 250 t x 4.6 m Max. Crane oom Length: 76.2 m Max. Long oom Length: 9.4 m Max. Fixed Jib Combination: 76.2 + 30.5m Max. ower Jib Combination: 64. + 5.8 m CONFIGURAION

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : BMS1000 Max. Lifting Capacity: 100 t x 3.8 m Max. Crane Boom Length: 62.6 m BMS1000 CONTENTS 3 SPECIFICATIONS 5 6 8 9 10 11 12 13 14 1 GENERAL DIMENSIONS BOOM AND JIB ARRANGEMENTS

More information

Technical Data. Specifications & Capacities. 80 US ton 80 metric ton

Technical Data. Specifications & Capacities. 80 US ton 80 metric ton Technical Data Specifications & Capacities 1 5640 (supersedes 5628)-0613-S4 80 US ton 80 metric ton CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating

More information

Technical Data. Specifications & Capacities. Telescopic Boom Truck Crane 60.0 metric ton

Technical Data. Specifications & Capacities. Telescopic Boom Truck Crane 60.0 metric ton 1 Technical Data Specifications & Capacities Telescopic Boom Truck Crane 60.0 metric ton CAUTION: This material is supplied for reference use only. Operator must refer to in---cab Crane Rating Manual and

More information

Technical Data. Specifications & Capacities. 80 US ton 80 metric ton

Technical Data. Specifications & Capacities. 80 US ton 80 metric ton 1 5628 (supersedes 5626-0213-S4 Technical Data Specifications & Capacities 80 US ton 80 metric ton CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating

More information

LS-208H II. HYLAB Series. Lattice Boom Crawler Crane 80-ton (77.62 mt)

LS-208H II. HYLAB Series. Lattice Boom Crawler Crane 80-ton (77.62 mt) LS-208H II HYLB Series Lattice Crawler Crane 80-ton (77.62 mt) The duty cycle crane with big horsepower, outstanding versatility and bullet-proof hydraulic controls 80-ton (77.57 mt) at 11' (3.35 m) radius

More information

TELESCOPIC BOOM CRAWLER CRANE 30 TON CAPACITY

TELESCOPIC BOOM CRAWLER CRANE 30 TON CAPACITY TELESCOPIC BOOM CRAWLER CRANE 6010 30 TON CAPACITY OPTIONAL EQUIPMENT ACCESS WALKWAYS VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive

More information

TADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA

TADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA SPEC. SHEET No. GR-7E-1-214/EU-51 DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-7EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY BOOM 7, kg at 3. m 5-section, 11.5 m 44. m DIMENSION Overall

More information

HTC-8670LB TELESCOPIC TRUCK CRANE 70-Ton (63.50 mt)

HTC-8670LB TELESCOPIC TRUCK CRANE 70-Ton (63.50 mt) HTC-867LB TELESCOPIC TRUCK CRANE 7-Ton (63.5 mt) 7-ton at a 9-foot radius 94, lbs. gross vehicle weight (fully loaded) 127-foot, full power, four-section boom with quick reeve boom head 67-foot, two-stage,

More information

GTC-300EX. 27t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO /15 ISO

GTC-300EX. 27t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO /15 ISO GENERAL DATA CRANE CAPACITY 27t at 3.0m BOOM DIMENSION Overall Length Overall Width (tracks extended) Overall Width (tracks retracted) Overall Height MASS Gross Vehicle Mass (Standard Equipment Package)

More information

Manitowoc 999. Product Guide. Features. 250 t (275 USt) capacity m-ton (8,268 ft-kips) maximum load moment. 88,4 m (290 ft) heavy-lift boom

Manitowoc 999. Product Guide. Features. 250 t (275 USt) capacity m-ton (8,268 ft-kips) maximum load moment. 88,4 m (290 ft) heavy-lift boom Manitowoc 999 Product Guide Features 250 t (275 USt) capacity 1 115 m-ton (8,268 ft-kips) maximum load moment 88,4 m (290 ft) heavy-lift boom 100,6 m (330 ft) fixed jib on heavy-lift boom 128,0 m (420

More information

CRANE RATING MANUAL HTC

CRANE RATING MANUAL HTC SERIAL NUMBER: CRANE RATING MANUAL 5---Section Boom For Replacement, Order Part Number: N3P0199 (031907) R Link-Belt is a registered trademark. 1of244 N3P0200 Table Of Contents Page Contents 3---4 Operating

More information

Technical Data. International Specifications & Capacities. Telescopic Boom Rough Terrain Crane 80 metric ton 90 US ton

Technical Data. International Specifications & Capacities. Telescopic Boom Rough Terrain Crane 80 metric ton 90 US ton 1 Technical Data International Specifications & Capacities Telescopic Boom Rough Terrain Crane 80 metric ton 90 US ton To injury, boom prevent or do attachments. not personal climb ULTRA DIESEL (15 Refer

More information

GTC t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO. TMC-DI /18

GTC t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO. TMC-DI /18 GENERAL DATA CRANE CAPACITY 80t at 3.0m BOOM DIMENSION Overall Length Overall Width (tracks extended) Overall Width (tracks retracted) Overall Width (tracks removed) Overall Height (working) MASS Gross

More information

model 999 product guide contents features 250 mton (275 ton) capacity mton-m (8,268 ft-kips) Maximum Load Moment 88,4 m (290') Heavy-Lift Boom

model 999 product guide contents features 250 mton (275 ton) capacity mton-m (8,268 ft-kips) Maximum Load Moment 88,4 m (290') Heavy-Lift Boom features 50 mton (75 ton) capacity 5 mton-m (8,68 ft-kips) Maximum oad Moment 88, m (90') eavy-ift 0,6 m (0') ong-reach 00,6 m (0') Fixed Jib on eavy-ift 5,8 m (80') Fixed Jib on ong-reach 90 kw (75 P)

More information

6. Working radii are measured from centre of swing and under load.

6. Working radii are measured from centre of swing and under load. The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 20 m main boom, consisting of A frame, boom foot (7 m), boom head (7 m), boom extension (6 m), 60.6 t basic counterweight,

More information

HC USt capacity Hydraulic crawler crane Datasheet imperial HC 110

HC USt capacity Hydraulic crawler crane Datasheet imperial HC 110 HC USt capacity Hydraulic crawler crane Datasheet imperial HC CONTENTS HC Page: Key........................................................................................... 3 Highlights.....................................................................................

More information

HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 250 t x 4.6 m Max. Crane Boom Length: 76.2 m Max. Long Boom Length: 9.4 m Max. Fixed Jib Combination: 76.2 + 30.5m Max. ower Jib Combination: 64. + 5.8 m

More information

data model 222 product guide contents features 91 mton (100 ton) capacity Specifications 2 Outline Dimensions 6 Transport Data 12

data model 222 product guide contents features 91 mton (100 ton) capacity Specifications 2 Outline Dimensions 6 Transport Data 12 data features 9 mton (00 ton) capacity 07 mton-m (,4 ft-kips) Maximum oad Moment 6,0 m (00') eavy-ift 76, m (50') Fixed Jib on eavy-ift 80,8 m (65') uffing Jib on eavy-ift 96,0 m (5') Fixed Jib on uffing

More information

Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 100 ton (90.72 metric ton)

Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 100 ton (90.72 metric ton) 5494 (supersedes 5471)--- 0906--- J7 1 Technical Data Specifications & Capacities Telescopic Boom Rough Terrain Crane 100 ton (90.72 metric ton) CAUTION: This material is supplied for reference use only.

More information

Index Performance Data Working Weights Assembly Manitowoc Crane CARE SM

Index Performance Data Working Weights Assembly Manitowoc Crane CARE SM Index Specifications Outline Dimensions and Weights Wire Rope engths Wire Rope Specifications Combinations Range Diagram and Capacity Charts 3-7 3 3 3 3 5 7-3 9-9 9-0 -5 5-57 5 - -3 - -7-9 3 5-7 30-3 33-3

More information

Rough Terrain Crane 30-ton (30.0 mt)

Rough Terrain Crane 30-ton (30.0 mt) Rough Terrain Crane 30-ton (30.0 mt) 29 91.3 (8.8 27.8m) four-section diamond embossed full power boom with quick reeve boom head Two boom extend modes: A-max and standard boom lifting capacities Optional

More information

TELESCOPIC BOOM CRAWLER CRANE 45 TON CAPACITY

TELESCOPIC BOOM CRAWLER CRANE 45 TON CAPACITY TELESCOPIC BOOM CRAWLER CRANE 9010 45 TON CAPACITY VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel

More information

5. For max. wind speed please refer to lift chart in operator s cab or manual.

5. For max. wind speed please refer to lift chart in operator s cab or manual. The operating weight includes the basic machine with crawlers, 2 main winches 120 kn including wire ropes (260 m and 495 m) and 20 m main boom, consisting of A frame, boom foot (10 m), boom head (7 m),

More information

Ground bearing pressure 1.14 kg/cm 2. Main boom (No xx) max. length High reach (1311.xx and 1008.xx) 83 m Luffing jib (No xx) max.

Ground bearing pressure 1.14 kg/cm 2. Main boom (No xx) max. length High reach (1311.xx and 1008.xx) 83 m Luffing jib (No xx) max. The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 14 m main boom, consisting of A frame, boom foot (5.5 m), boom head (8.5 m), 32.3 t basic counterweight, 15 t carbody

More information

2. Crane standing on firm, horizontal ground.

2. Crane standing on firm, horizontal ground. The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs and 46 ft main boom, consisting of A frame, boom foot (18 ft), boom head (28 ft), 71,200 lbs basic counterweight,

More information

Lifting Capacities Telescopic Boom All Terrain Crane ATC ton (118 metric ton) Link Belt

Lifting Capacities Telescopic Boom All Terrain Crane ATC ton (118 metric ton) Link Belt Lifting Capacities Telescopic Boom All Terrain Crane ATC 3130 130 ton (118 metric ton) Boom and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range

More information

For sales use only CRANE RATING MANUAL. RTC-8090 Series II 5 - Section Boom. Not for crane operations SERIAL NUMBER: XXXX-XXXX

For sales use only CRANE RATING MANUAL. RTC-8090 Series II 5 - Section Boom. Not for crane operations SERIAL NUMBER: XXXX-XXXX SERIAL NUMBER: XXXX-XXXX CRANE RATING MANUAL RTC-8090 Series II 5 - Section Boom For Replacement, Order Part Number: N4P0090 (110509) R Link-Belt is a registered trademark. 1of96 N4P0091 Table Of Contents

More information

TADANO MODEL TM TON CAPACITY

TADANO MODEL TM TON CAPACITY LIFTING CHARTS - Trucks TADANO MODEL TM-35100-35 TON CAPACITY WORKING RANGE 25 45 5 160ʼ 150ʼ 140ʼ 79.5 7 6 100ft + 28.2ʼ jib 100ft + 50.0ʼ jib 5 45 4 35 3 86.2ft 100ft 130ʼ 120ʼ 110ʼ 100ʼ 90ʼ 80ʼ 70ʼ

More information

TADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA

TADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-55EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length Overall width Overall

More information

LINK-BELT MODEL HTC-8675LB - 75 TON CAPACITY 48 7" (.80m) 41 0" /8" (3.52m) /16" (2.02m) /4" (.34m) 25" 11 0" (.

LINK-BELT MODEL HTC-8675LB - 75 TON CAPACITY 48 7 (.80m) 41 0 /8 (3.52m) /16 (2.02m) /4 (.34m) 25 11 0 (. LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL - 75 TON CAPACITY 41 0" (12.50m) 48 7" (14.80m) C L Of Rotation 13 8 1/8" (4.17m) 7 0" (2.13m) 4 5/8" (118mm) 11 6 7/8" (3.52m) 6 7 11/16" (2.02m)

More information

Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 110 US ton 100 metric ton

Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 110 US ton 100 metric ton 1 Technical Data Specifications & Capacities Telescopic Boom Rough Terrain Crane 110 US ton 100 metric ton CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane

More information

GTC t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO. TMC-DI /16

GTC t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO. TMC-DI /16 GENERAL DATA CRANE CAPACITY 80t at 3.0m BOOM DIMENSION Overall Length Overall Width (tracks extended) Overall Width (tracks retracted) Overall Width (tracks removed) Overall Height (working) MASS Gross

More information

Ground bearing pressure 1.08 kg/cm 2. Main boom (No xx) max. length High reach (No xx and 1309.xx)

Ground bearing pressure 1.08 kg/cm 2. Main boom (No xx) max. length High reach (No xx and 1309.xx) The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 17 m main boom, consisting of A frame, boom foot (7 m), boom head (10 m), 50.9 t basic counterweight, 20 t carbody

More information

65-ton (60.0 mt) Rough Terrain Crane

65-ton (60.0 mt) Rough Terrain Crane 65-ton (60.0 mt) Rough Terrain Crane 65 tons (60.0 mt) at 9 ft (2.50 m) radius 38-115 ft (11.6-35.0 m) four section, full power boom with quick reeve boom head Boom wear pads have Teflon pucks that lubricate

More information

TADANO ROUGH TERRAIN CRANE. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m

TADANO ROUGH TERRAIN CRANE. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m DATE July, 2004 TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION Overall length approx. 11,245 mm

More information

TADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m

TADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245 mm Overall width

More information

GTC Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION

GTC Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION 66 Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY BOOM 66 ton at 10 feet (60t at 3.0m) 4-section, 37 8 118 1 (11.5 m 38.0 m) DIMENSION Overall Length 46 1 (14.08 m) Overall Width (tracks

More information

Technical Data. Specifications & Capacities. 130 US ton 120 metric ton

Technical Data. Specifications & Capacities. 130 US ton 120 metric ton 1 Technical Data Specifications & Capacities 130 US ton 120 metric ton CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual

More information

GTC Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION

GTC Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION 88 Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY BOOM 88 ton at 10 feet (80t at 3.0m) 5-section, 37 8 141 1 (11.5 m 43.0 m) DIMENSION Overall Length 45 11 (14.00 m) Overall Width (tracks

More information

HC 80 Hydraulic Crawler Crane 80 t Lifting Capacity HYDRAULIC CRAWLER CRANE

HC 80 Hydraulic Crawler Crane 80 t Lifting Capacity HYDRAULIC CRAWLER CRANE HC Hydraulic Crawler Crane t Lifting Capacity HC HYDRAULIC CRAWLER CRANE 410 Stevenson Dr, Bolingbrook, IL 4 6-972-9199 16675 Van Dam Rd, South Holland IL 473 219-972-9199 www.stevensoncrane.com (73 mt)

More information

110 ton (100 mt) Telescopic Crawler Crane

110 ton (100 mt) Telescopic Crawler Crane 110 ton (100 mt) Telescopic Crawler Crane 150' (45.7 m) main boom 159' (48.6m) main boom tip height Five section full power boom Remarkable control, reliability & capacity performance Unbeatable hydraulic

More information

Technical data Hydraulic lift crane LR 1160

Technical data Hydraulic lift crane LR 1160 Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600

More information

Technical data Hydraulic lift crane LR 1160

Technical data Hydraulic lift crane LR 1160 Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600

More information

PRELIMINARY GTC t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO. TMC-DI /14-ISO

PRELIMINARY GTC t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO. TMC-DI /14-ISO GENERAL DATA CRANE CAPACITY 120t at 3.0m BOOM 5-section, 12.8 m 47.2 m DIMENSION Overall Length 15.8 m Overall Width (tracks extended) 5.8 m Overall Width (tracks retracted) 3.66 m Overall Width (tracks

More information

HC US tons lifting capacity Crawler crane Datasheet imperial

HC US tons lifting capacity Crawler crane Datasheet imperial HC 2 HC 2 2 US tons liing capacity Crawler crane Datasheet imperial CONTENTS HC 2 Page: Highlights... 4 Specifications... 5 Dimensions... 67 59HI Offset Tip Boom Range Diagram... 8 Load Charts... 9 Notes

More information

Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 65 ton (60.0 metric ton)

Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 65 ton (60.0 metric ton) 5557 (supersedes 5538)--- 0709--- J9 1 Technical Data Specifications & Capacities Telescopic Boom Rough Terrain Crane 65 ton (60.0 metric ton) CAUTION: This material is supplied for reference use only.

More information