TI TOWN CHEMICAL PUMPS

Transcription

1 TMI Series (Industrial-process thermoplastic resin centrifugal pumps) Exceptional mechanical strength provided by the ductile cast iron (FCD 450) pump casing and non metallic back casing cover TI TOWN CHEMICAL PUMPS

2 (1) Motor Mounted type: (4) Impeller size: (mm) (9) Drive motor: None= IEC B5 motor 7 = 7.5HP (5.5KW) B = IEC B5 motor with base (5) Wet-end material: = HP (7.5KW) P = Pump unit without motor E = cfr-etfe 15 = 15HP (11KW) (coupling drive type) P = crf-pp = HP (15KW) C = Coupling drive with IEC B3 25 = 25HP (18.5KW) foot mounted motor (6) Impeller shaft: S = Sic () Pump frequency: (2) Outlet dimension: C = Ceramic 5 = 50HZ standard size ISO PN16 6 = HZ (JIS kg/cm² upon reguest) (7) Impeller bearing: 32 = 50A 32A (3J = 50A*A) S = Sic (11) Motor voltages specific: = 65A A (4J = 65A*50A) G = carbon Graphite 3 = 3Ø 2/380V 65 = 80A 65A (6J = 80A*65A) 4 = 3Ø 2/4V (8) Casing O-RING: T = special SPEC. (3) Impeller range: V = FKM (Viton) A = 5.5KW~7.5KW E = Epdm (12) Reserve for customization B = 11KW~18.5KW Recommend drive motor = specific gravity * Max. shaft power Features: The TMI pump is a single-stage, magnetic driven back pull out system, centrifugal pump.tmip series is full compliance with ISO 2858,means that this type pump is suitable for quick and simple system revamping. All wet-end parts are made by injection mold with various engineering plastic (CFR-PP and CRF-ETFE) to provide superior corrosion resistance.tmi series exceptional mechanical provided by the ductile cast iron(fcd 450) pump casing cover and non metallic back casing cover,maximum allowable pressure rating is bar. The magnets are in permanet magnets,ensuring coupling efficiency even when processing liquids with heavy specific gravity.silicon carbide bearings allow the use of these pumps even with difficult and abrasive liquids.on the other hand, the low friction Carbon graphite version, together with our special design for magnetic unit balancing to provide superior cooling system, enables the pump to withstand short periods of dry running. 5.5kw~7.5kw pump shaft is supported between front casing and rear casing, 11kw~18.5kw pump shaft is supported by thermoplastic resin encapsulate FCD 450 bearing frame enables the pump to increased stability and withstand abnormal operation situation. The transmission is delivered through a magnetic coupling without any mechanical connection between impeller and drive shaft. This system ensures zero leakage, operator safety and elimination of dangerous odors or liquids to the atmosphere. Application fields: 1. Biochemistry 6.Petrochemical industry 2.Chemical and pharmaceutical industry 3.Chemical storage 7.Paper industry 8.Textiles 4. Food industry 9.Tanning industry 5.Galvanizing TI TOWN CHEMICAL PUMP ISO 2858 Magnetic drive with FCD 450 casing shell thermoplastic resin pump(7.5hp~25hp) TMI C 32 B P C (1) (2) (3) (4) (5) (6) (7) (8) G V (9) () (11) (12).Water and air treatment and purification

3 Industrial-Process magnetic drive centrifugal pumps technical specifications Technical specifications 50/HZ Wet-end Materials CFR-PP or CFR-ETFE Flow rate Head Electric motors Temperature range Allowable pressure rating Viscosity Allowable solids max 90 m³/h max 66 / 95 M from 5.5 kw to 18.5kw from 0 C to 80 C (CFR-PP) / 5 C (CFR-ETFE) max bar max 0 cps Max. concentration 5% by weight,max. hardness 80(HS), particle size 50 µm Performance range chart 50HZ 0 0 HZ TMI TMI TMI-32 TMI TMI TMI (LPM) (LPM)

4 Impeller range 5.5KW~7.5KW Front casing A moulding made of thermoplastic resins Impeller unit The high efficiency closed type impellers (CFRPP or CFRETFE) fixing with totally with shaft supporter. encapsulated inner Exceptional mechanical magnetic core which are strength provided by the obtain by professional ductile cast iron outer pump casing hydraulic design programmed. Rear casing & rear casing cover The rear casing is made of thermoplastic resins (CFRPP or CFRETFE) with shaft supporter. The outer rear casing cover is molded in carbon fiber reinforced composite resin which can bear bar in 1 C. This non metallic rigid cover not only eliminates any eddy current losses but also prevents sparks from the rear casing come into contact with the outer magnetic core. Wet-end materials Materials PCG PSS ESS a O-ring FKM / EPDM / FEP+FKM b Front casing c Impeller d Back casing cfr-pp cfr- ETFE e Magnet capsule PP ETFE f Shaft g Rear trust Ceramic h Impeller Bearing i Mouth ring carbon Graphite SIC SIC j Trust ring Ceramic k Drain cfr-pp cfr-etfe

5 Specifications for 5.5KW~7.5KW Model In/Outlet TMI-32A 50A 32A 18 TMI-A 65A A TMI-65A 80A 65A Flow rate impeller 50HZ HZ M³/H size(mm) Totla head(m) Max.Sp(kw) Totla head(m) Max.Sp(kw) Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø1 Ø Ø1 Ø Test accordance with ISO (clear water at room temperature) Total Head = Suction Head + Delievery Head + Velocity Head Max. Sp = Maximum drive Shaft Power at this impeller size TMI-32A 50HZ 50 TMI-32A HZ (LPM) (LPM) 50 TMI-A 50HZ 50 TMI-A HZ (LPM) (LPM) TMI-65A 50HZ TMI-65A HZ (LPM) (LPM)

6 Impeller range 11KW~18.5KW Front casing A moulding made of thermoplastic resins (CFRPP or CFRETFE). Exceptional mechanical strength provided by the ductile cast iron outer pump casing Impeller The high efficiency closed type impellers with a molded-in metal insert are obtain by professional hydraulic design programmed which are driven by SUS shaft Bearing frame/bush This is made of thermoplastic resins Inner magnet core with drive shaft The inner magnet core are totally encapsulated with a molded-in FCD with thermoplastic resins 450 insert which (PP or ETFE). The high support the bearing bush. torque is transmitted The rigid structure hold the to impeller via a rigid SUS rotary parts stably & smoothly shaft with SIC/ceramic sleeve Rear casing & rear casing cover The rear casing is made of thermoplastic resins (CFRPP or CFRETFE). The outer rear casing cover is molded in carbon fiber reinforced composite resin which can bear bar in 1 C. This non metallic rigid cover not only eliminates any eddy current losses but also prevents sparks from the rear casing come into contact with the outer magnetic core. a b c d e f g h i j k l m n Materials PCG PSS ESS O-ring Front casing Impeller Back casing Magnet capsule PP ETFE Shaft sleeve Rear trust Impeller Bearing Mouth ring Trust ring Drain Bearing frame Impeller nut Magent nut FKM / EPDM / FEP+FKM cfr-pp Ceramic carbon Graphite Ceramic cfr-pp ETFE SIC cfr- ETFE SIC cfr-etfe

7 Specifications for 11KW~18.5KW Flow rate impeller 50HZ HZ Model In/Outlet M³/H size(mm) Totla head(m) Max.Sp(kw) Totla head(m) Max.Sp(kw) Ø Ø Ø TMI-32B 50A 32A 18 Ø Ø Ø Ø Ø Ø Ø Ø TMI-B 65A A Ø Ø Ø Ø Ø Ø TMI-65B 80A 65A Ø Ø Ø Ø Test accordance with ISO (clear water at room temperature) Total Head = Suction Head + Delievery Head + Velocity Head Max. Sp = Maximum drive Shaft Power at this impeller size 75 TMI-32B 50HZ 0 TMI-32B HZ (LPM) (LPM) TMI-B 50HZ TMI-B HZ (LPM) TMI 65B 50HZ TMI 65B HZ 00 (LPM) (LPM) (LPM)

8 Dimensions Fig.A L Fig.B L Fig.C H f A B g H f A B g h2 h1 A B g Ø24 a w e1 e c d H1 f b b1 c 2-Øh 70 2-Øh 14 w a d 14 n1 n2 n4 n5 ( ) = JIS kg/cm² flange Model Motor A B W H H1 * L a b b1 c d e e1 f g h h1 h2 n1 n2 n4 n5 TMI32 (TMI3J) 5.5~7.5KW () (50) KW 907 FIG.A with base TMI (TMI4J) 5.5~7.5KW (50) (65) KW 927 Fig.B without base Fig.C pump unit TMI65 (TMI6J) TMI32 (TMI3J) TMI (TMI4J) TMI65 (TMI6J) 5.5~7.5KW (65) (80) KW ~7.5KW Ø () (50) Ø KW ~7.5KW Ø (50) (65) Ø KW ~7.5KW Ø (65) (80) Ø KW 927 TMIP Ø TMIP Ø TMIP Ø * L will differ depending on the difference brand of the motor TI TOWN TECHNOLOGY CO., LTD. NO.332, Sec. 2, Zhongyi Rd., Guishan Dist., Taoyuan City 33378, Taiwan TEL: FAX: Web site: titown.pump@msa.hinet.net service@titown.net