PACKAGED HEAT PUMP AIR HANDLER UNITS, 6 25 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE
|
|
- Eugene Miles
- 5 years ago
- Views:
Transcription
1 Product Specifications COMMERCIAL PACKAGED HEAT PUMP AIR HANDLER UNITS, 6 25 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE Multi position design for horizontal or vertical installation without modification Two sloped condensate pans on each unit for horizontal or vertical applications Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality High-static design meets a wide range of applications than competitive package air handler lines Economizer accessory provides ventilations air and free cooling Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to sizes. Dual circuit can be field modified for use on single circuit condensers Single blower on 072 to 120 sizes, dual blower on & sizes Optional 2 speed indoor fan with VFD controller 072 to ton sizes High efficiency copper tube / aluminum coils Standard factory installed thermo static expansion valve (TXV) with removable power element Easy maintenance removal of single panel allows access to virtually all components Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available 24 volt terminal block for control wiring connection. Hot water coil, steam coil, and electric heat accessories are available. WARRANTY 1 Year parts limited warranty UNIT PERFORMANCE DATA Number of Circuits Unit Weight lb. [kg] Nominal Unit Dimensions UNIT Tons H x W x L [mm] 072*AAA0A0A /16 x 49 x 28 3/16 [1424 x 1244 x 714] 381 [173] 091*AAA0A0A 71/ /16 x 49 x 28 3/16 [1424 x 1244 x 714] 385 [175] 120*AAA0A0A /16 x 49 x 28 3/16 [1424 x 1244 x 714] 427 [194] *AAA0A0A /16 x 89 x 28 3/16 [1424 x 2261 x 714] 713 [323] *AAA0A0A /16 x 89 x 28 3/16 [1424 x 2261 x 714] 720 [327] * Indicates Unit voltage: K = 208/ , M = 208/230/ , H = 208/ , L = , S = NOTE: BASE MODEL NUMBERS LISTED. SEE MODEL NOMENCLATURE LISTING FOR ADDITIONAL OPTIONS Specifications subject to change without notice /29/16
2 MODEL NUMBER NOMENCLATURE MODEL SERIES F H S M A A A 0 A 0 A Position Number F = R 410A Fan Coil Unit H = Heat Pump S = Standard Efficiency Type Efficiency 072 = 6 Tons (1 circuit) 091 = 7.5 Tons (1 circuit) 120 = 10 Tons (2 circuit) = 15 Tons (2 circuit) = 20 Tons (2 circuit) Nominal Tonnage K = 208/ H = 208/ M = 460/208/ L = S = Voltage A = Standard Static Standard Efficiency Motor / Standard Drive B = High (Alternate) Static Standard Efficiency Motor / High Drive (072 & 091 Only) High (Alternate) Static High A Efficiency Motor/ High Drive (120,, Only) D = Standard Static High Efficiency Motor / Standard Drive E = High Static High Efficiency Motor / High Drive Fan Motor Options * * See table below for Motor Options A = Al/Cu A = Future Use Indoor Coil 0 = Single Speed Indoor Fan Motor 2 = Two Speed Indoor Fan Motor Controller (VFD) Fan Speed Controller A = Standard Unpainted B = Painted cabinet (Gray) Painted Cabinet Options 0 = Future use Future Use A = Standard Single phase units designate standard motor and high static drive. All with a M voltage designation are triple voltage; i.e., 208/230/ M voltage is not available on 2 speed indoor fan motor option Single Speed Motors Position 8 Motor Description Voltage Unit Size A Standard Static, Standard Efficient Motor / Standard Drive All 208/ B High (Alternate) Static, Standard Efficient Motor / High Drive 208/ D Standard Static, High Efficient Motor / Standard Drive All E High (Alternate) Static, High Efficient Motor / High Drive 208/ Speed Motors Position 8 A E Motor Description Voltage Unit Size Standard Static, Standard Efficient Motor / Standard Drive All Standard Static, High Efficient Motor / Standard Drive All High (Alternate) Static, Std Efficient Motor / High Drive 208/ High (Alternate) Static, High Efficient Motor / High Drive 208/ Specifications subject to change without notice
3 PHYSICAL DATA UNIT *AA NOMINAL CAPACITY (Tons) / OPERATING WEIGHT (lb) Base Unit with TXV Plenum FANS Qty...Diam. (in.) Nominal Airflow (cfm) Airflow Range (cfm) Nominal Motor Hp (Standard Motor)* 208/ / and Motor Speed (rpm) 208/ / and REFRIGERANT R 410A R 410A R 410A R 410A R 410A R 410A Operating charge (lb) (approx per circuit) / / DIRECT EXPANSION COIL Enhanced Copper Tubes, Aluminum Sine Wave Fins Max Working Pressure (psig) Face Area (sq ft) No. of Splits No. of Circuits per Split Split Type...Percentage Face...50/50 Face...50/50 Face...50/50 Rows...Fins/in / 15 PIPING CONNECTIONS, Quantity...Size (in.) DX Coil Suction (ODF) / / / / / / 8 DX Coil Liquid Refrigerant (ODF) / / / / / / 8 Steam Coil, In (MPT) / / / / / / 2 Steam Coil, Out (MPT) / / / / / / 2 Hot Water Coil, In (MPT) / / / / Hot Water Coil, Out (MPT) / / / / Condensate (PVC) / 8 ODM / 1 1 / 4 IDF FILTERS Throwaway Factory Supplied Quantity...Size (in.) x 24 x x 24 x x 24 x x 24 x x 20 x x 24 x 2 Access Location Either Side Either Side Either Side Either Side Either Side Either Side STEAM COIL Max Working Pressure (psig at 260 F) Total Face Area (sq ft) Rows...Fins/in HOT WATER COIL Max Working Pressure (psig) Total Face Area (sq ft) Rows...Fins/in Water Volume (gal) (ft 3 ) LEGEND DX Direct Expansion TXV Thermostatic Expansion Valve Units are shipped without refrigerant charge. Field installed accessory only. * Refer to Alternate Fan Motor Data table for alternate motor data. Specifications subject to change without notice
4 OPTIONS AND ACCESSORIES ITEM OPTION* ACCESSORY Alternate Fan Motors X Alternate Drives X 2 Speed Indoor Fan Motor X CO 2 Sensors X Condensate Drain Trap X Discharge Plenum X Economizer Ultra LOW LEAK FDD X Economizer Standard Leak X Electric Heat X Hot Water Heating Coils X Overhead Suspension Package X Prepainted Units X Programmable Thermostats X Return Air Grille X Steam Heating Coil X Subbase X Display Kit for 2 Speed Indoor Fan Motor with VFD X * Factory-installed option. Field-installed accessory Factory installed options Alternate fan motors and drives are available to provide the widest possible range of performance. Prepainted steel units are available from the factory for applications that require painted units. Units are painted with American Sterling Gray color. 2 Speed Indoor Fan Motor system saves energy and installation time by utilizing a Variable Frequency Drive (VFD) to automatically adjust the indoor fan motor speed in sequence with the units cooling operation. Per ASHRAE standard section b, during the first stage of cooling operation the VFD will adjust the fan motor to provide 2/3rd of the total cfm established for the unit. When a call for the second stage of cooling is required, the VFD will allow the total cfm for the unit established (100%). During the heating mode the VFD will allow total design cfm (100%) operation and during the ventilation mode the VFD will allow operation to 2/3rd of total cfm. Compared to single speed indoor fan motor systems, ICP s 2 Speed Indoor Fan Motor system can save substantial energy, 25%+*, versus single speed indoor fan motor systems. *Data based on.10 ($/kwh) in an office application utilizing ICP s HAP 4.6 simulation software program. The VFD used in 2 Speed Indoor Fan Motor system has soft start capabilities to slowly ramp up the speeds, thus eliminating any high inrush air volume during initial start up. It also has internal over current protection for the fan motor and a field installed display kit that allows adjustment and in depth diagnostics of the VFD. This 2 Speed Indoor Fan Motor system is available on models with 2 stage cooling operation with electrical mechanical controls. The 2 Speed Indoor Fan Motor system is very flexible for initial fan performance set up and adjustment. The standard factory shipped VFD is pre programmed to automatically stage the fan speed between the first and second stage of cooling. The unit fan performance static pressure and cfm can be easily adjusted using the traditional means of pulley adjustments. The other means to adjust the unit static and cfm performance is to utilize the field installed Display Kit and adjust the frequency and voltage in the VFD to required performance requirements. In either case, once set up, the VFD will automatically adjust the speed between the cooling stage operations. Field installed accessories CO 2 sensors can be used in conjunction with the economizer accessory to help meet indoor air quality requirements. The sensor signals the economizer to open when the CO 2 level in the space exceeds the set point. A programmable thermostat can be used to override the sensor if the outside air temperature is too high or too low. Condensate drain trap includes an overflow shutoff switch that can be wired to turn off the unit if the trap becomes plugged. Kit also includes a wire harness that can be connected to an alarm if desired. The transparent trap is designed for easy service and maintenance. Discharge plenum directs the air discharge directly into the occupied space; integral horizontal and vertical louvers enable redirection of airflow. Accessory is available unpainted or painted. Field assembly is required (only applicable for vertical application). Economizers temperature dry bulb controlled Ultra LOW LEAK EconoMi$er X with solid state W7220 controller, gear driven, modulating damper, spring return actuator. Supply and outdoor air sensors, and CO2 sensor compatible, for use in electro mechanical controls only. Also includes return and outside air damper leakage that meets California Title 24 section requirements. Controller meets California Title 24 Section Fault Detection and Diagnostic (FDD) requirements. STANDARD EconoMi$er IV with gear driven damper blades and W7212 controller (Use HH 57AC 078 for enthalpy control). Electric resistance heat coils have an open wire design and are mounted in a rigid frame. Safety cutouts for high temperature conditions are standard. Terminal block for single point power connection is included. Two row hot water coils have copper tubes mechanically bonded to aluminum plate fins and non ferrous headers. Overhead suspension package includes necessary brackets to support units in horizontal ceiling installations. Return air grille provides a protective barrier over the return air opening and gives a finished appearance to units installed in the occupied space. Accessory is available unpainted or painted. One row steam coil has copper tubes and aluminum fins. The Inner Distributing Tube (IDT) design provides uniform temperatures across the coil face. The steam coil has a broad operating pressure range; up to 20 psi (138 kpag) at 260 F (126 C). The IDT steam coils are especially suited to applications where sub freezing air enters the unit. Subbase provides a stable, raised platform and room for condensate drain trap connection for vertical floor mounted units. Accessory is available unpainted or painted. 4 Specifications subject to change without notice
5 ACCESSORY HEATERS NOMINAL HEATER PART NO. DESCRIPTION CAPACITY USED WITH (V 3 PHASE 60 HZ) CAELHEAT001A kw, 5 072, 091, 120 CAELHEAT004A kw, , 091, 120 CAELHEAT007A kw, , 091, 120 CAELHEAT010A kw, , 091, 120 CAELHEAT013A kw, , 120 CAELHEAT016A kw, 10, CAELHEAT019A kw, 20, CAELHEAT022A kw, 30, CAELHEAT025A kw, 50, (480V 3 PHASE 60 HZ) CAELHEAT002A kw, 5 072, 091, 120 CAELHEAT005A kw, , 091, 120 CAELHEAT008A kw, , 091, 120 CAELHEAT011A kw, , 091, 120 CAELHEAT014A kw, , 120 CAELHEAT017A kw, and 7.0 kw, Electric Heater 10, CAELHEAT020A kw, and 15.0 kw, Electric Heater 20, CAELHEAT023A kw, and 21.0 kw, Electric Heater 30, CAELHEAT026A kw, and 35.0 kw, Electric Heater 50, (575V 3 PHASE 60 HZ) CAELHEAT003A kw, 5 072, 091, 120 CAELHEAT006A kw, , 091, 120 CAELHEAT009A kw, , 091, 120 CAELHEAT012A kw, , 091, 120 CAELHEAT015A kw, , 120 CAELHEAT015A kw, 10, CAELHEAT021A kw, 20, CAELHEAT024A kw, 30, CAELHEAT027A kw, 50, * Electric heaters tested at a maximum ESP of 1.9 NOTE: App. Shipping weight for AAHC05AHA/CAELHEATER001A00-35CSA/015A00 is 55 lbs. Each App. Shipping weight for CAELHEAT016A00-027A00 is 60 lbs. each ACCESSORIES PART NO. DESCRIPTION USED WITH CAECOMZR001B00 Economizer temperature dry bulb controlled Standard Leak design with gear driven damper blades and W7212 controller (Use HH 57AC for enthalpy control) CAECOMZR008A00 Economizer temperature dry bulb controlled Ultra LOW LEAK EconoMi$er X with solid state W7220 controller, gear driven, modulating damper, spring return actuator. Supply and outdoor air sensors, and CO2 sensor compatible, for use in electro mechanical controls only. Also includes return and outside air damper leakage that meets Title 24 section requirements. Controller meets California Title 24 Section Fault Detection and Diagnostic (FDD) requirements. HH 57AC 081 Enthalpy Control for W7220 Controller only, (One required for single enthalpy, two required for different enthalpy) HH 57AC 078 Enthalpy control upgrade AHWC01AAA CAHWCOIL001A00 Hot Water Coil (2 row) ACSC01AA CAOVRFLW001A00 Condensate Overflow Switch Assembly APDC01AAA CAPLENUM001A00 Discharge Plenum APDPC01AAA CAPLENUM004A00 Discharge Plenum Painted AGRC01AAA CARAGRIL001A00 Return Air Grille Specifications subject to change without notice
6 ACCESSORIES PART NO. DESCRIPTION USED WITH AGRPC01AAA CARAGRIL004A00 Return Air Grille Painted ASPC01AAA CASTCOIL001A00 Steam Coil (1 row) CASUBASE001A00 Floor Mount Base (Subbase) ASBPC01AA CASUBASE003A00 Floor Mount Base (Subbase) Painted AHBC01AA CASUSPEN001A00 Overhead Suspension Brackets CAECOMZR002B00 Economizer - temperature dry bulb Enthalpy Controlled Standard Leak design with gear driven damper blades and W7212 controller (Use --HH--57AC-078, for enthalpy control) CAECOMZR010A00 Economizer - temperature dry bulb controlled - Ultra LOW LEAK - EconoMi$er X with solid-state W7220 controller, gear-driven, modulating damper, spring return actuator. Supply and outdoor air sensors, and CO2 sensor compatible, for use in electro mechanical controls only. Also includes return, and outside air damper leakage that meets Title 24 section requirements. Controller meets California Title 24 Section Fault Detection and Diagnostic (FDD) requirements. -HH--57AC-081 Enthalpy Control for W7220 Controller only, (One required for single enthalpy, two required for different enthalpy), --HH--57AC-078 Enthalpy control upgrade, CAHWCOIL002A00 Hot Water Coil (2 row), ACSC01AA CAOVRFLW001A00 Condensate Overflow Switch Assembly, CAPLENUM002A00 Discharge Plenum, CAPLENUM005A00 Discharge Plenum - Painted, CARAGRIL002A00 Return Air Grille, CARAGRIL005A00 Return Air Grille - Painted, CASTCOIL002A00 Steam Coil (1 row), CASUBASE001A00 Floor Mount Base (Subbase), ASBPC01AA CASUBASE003A00 Floor Mount Base (Subbase) - Painted, AHBC01AA CASUSPEN001A00 Overhead Suspension Brackets, Discharge plenums are shipped knocked down and require field assembly. Cannot be used with electric heat, or horizontal applications. This accessory replaces CAECOMZR001A00 which used a linkage damper blade design and W7459 controller. The CAE COMZR001A00 can be used if inventory is available as there is no price change between the two. ACCESSORIES ACCESSORIES: 2 SPEED (VFD) DISPLAY KIT PART NO. DESCRIPTION SHIPPING WT. (LBS) USED WITH CRDISKIT001A00 CATRANRY001A00 2 Speed VFD display kit - Provides the field capability to set up points and troubleshooting codes on the VFD controller. Kit includes display and cable. If preferred, kit can be used for any associated unit with VFD. ACCESSORIES: RELAY PACKAGE Transformer Relay Package - Contains 200/230/460 to 24-volt transformer, indoor fan and solenoid valve relays with wiring and quick connect terminals. Formerly 38AE Fan Coil Relay Board - Allows Line Voltage Connections Between Fan Coil Controller and Multi-Speed 33ZCRLYBRD 1 Fans or Line Voltage Actuators 1 Contact application engineering for more details All 2 Speed VFD Controllers Recommended for 24-volt thermostat applications when additional VA is required. (1) REQUIRED (2) REQUIRED 6 Specifications subject to change without notice
7 DIMENSIONS C , 091, 120 Specifications subject to change without notice
8 DIMENSIONS (cont.) C & 8 Specifications subject to change without notice
9 DIMENSIONS (cont.) CORNER WEIGHTS HORIZONTAL POSITION Fan Coil Fan Steam Coil or Hot Water Coil Base Unit Fan Coil Economizer C09039 UNIT SIZE 072, 091, 120, UNIT OR ACCESSORY NAME UNIT OR ACCESSORY WEIGHT lb (kg) CORNER NUMBER (WEIGHT IN LB) FAN COIL BASE UNIT 394 (178.7) STEAM COIL ADD 137 (62.1) HOT WATER COIL ADD 143 (64.9) ECONOMIZER ADD 128 (58.5) ECO + STEAM COIL ADD 264 (115.2) ECO + HW COIL ADD 271 (122.9) FAN COIL BASE UNIT 684 (310.3) STEAM COIL ADD 239 (108.4) HOT WATER COIL ADD 245 (111.1) ECONOMIZER ADD 217 (98.4) ECO + STEAM COIL ADD 456 (206.8) ECO + HW COIL ADD 463 (210.0) Specifications subject to change without notice
10 DIMENSIONS (cont.) CORNER WEIGHTS VERTICAL POSITION 5 6 Economizer Base Unit 1 Motor NOTE: Steam, Hot Water & Plenum on top of positions 1,2,3,4 C09040 UNIT SIZE 072, 091, 120, UNIT OR ACCESSORY NAME UNIT OR ACCESSORY WEIGHT lb (kg) CORNER NUMBER (WEIGHT IN LB) FAN COIL BASE UNIT 394 (178.7) STEAM COIL ADD 137 (62.1) HOT WATER COIL ADD 143 (64.9) PLENUM ADD 175 (79.4) ECONOMIZER ADD 128 (58.1) ECO + STEAM COIL ADD 264 (119.7) ECO + HW COIL ADD 271 (122.9) FAN COIL BASE UNIT 684 (310.3) STEAM COIL ADD 239 (108.4) HOT WATER COIL ADD 245 (111.1) PLENUM ADD 225 (102.1) ECONOMIZER ADD 217 (98.4) ECO + STEAM COIL ADD 456 (206.8) ECO + HW COIL ADD 463 (210.0) Specifications subject to change without notice
11 DIMENSIONS (cont.) OVERHEAD SUSPENSION ACCESSORY UNIT SIZES (FRONT) UNIT SIZES & (FRONT) Specifications subject to change without notice
12 DIMENSIONS (cont.) PLENUM, RETURN AIR GRILLE, AND SUBBASE ACCESSORIES Unit Sizes NOTE: Dimensions in [ ] are millimeters. Unit Sizes & Front 12 Specifications subject to change without notice
13 DIMENSIONS (cont.) HOT WATER AND STEAM COIL ACCESSORIES Unit Sizes NOTE: Dimensions in [ ] are millimeters. DIMENSION HOT WATER COIL STEAM COIL A 1 1 /2 MPT [38.1] 1 1 /2 MPT [38.1] B 1 1 /2 MPT [38.1] 2 1 /2 MPT [63.5] C 2 3 /8 [60.3] 3 1 /8 [79.4] D 4 7 /8 [123.8] 3 1 /8 [79.4] E 2 1 /8 [54.0] 4 9 /16 [115.8] F /4 [590.6] 1-9 [584.2] G 3-4 [1016.0] 3-4 [1016.0] C Unit Sizes & DIMENSION HOT WATER COIL STEAM COIL A 2 MPT [50.8] 1 1 /2 MPT [38.1] B 2 MPT [50.8] 2 1 /2 MPT [63.5] C 2 3 /8 [60.3] 3 1 /8 [79.4] D 4 7 /8 [123.8] 3 1 /8 [79.4] E 2 1 /8 [54.0] 4 9 /16 [115.8] F /4 [590.6] 1 9 [584.2] G 6 8 [2032.0] 6 8 [2032.0] Specifications subject to change without notice
14 DIMENSIONS (cont.) ECONOMIZER ACCESSORY Unit Sizes Unit Sizes & NOTE: 1. For horizontal unit applications, economizer can be attached to end of unit opposite duct connections. 2. Dimensions in [ ] are millimeters. C Specifications subject to change without notice
15 DIMENSIONS (cont.) ELECTRIC HEAT ACCESSORY C UNIT SIZE A B C D E F G H J - 1' 3 1 / 4 [387.4] 4' 6 3 / 8 [1381.1] NOTE: Dimensions in [ ] are millimeters. 2 5 / 16 [58.7] 2' 1 1 / 4 [641.4] 10 5 / 8 [269.9] 1' 4 [406.4] 1' 4 5 / 16 [414.3] 1' 6 3 / 4 [476.3] 1 7 / 8 [327.0] Specifications subject to change without notice
16 PERFORMANCE DATA Unit Evaporator Air Air Flow (Cfm) Ewb F ( C) Cooling Only Performance Coil Refrigerant Temp F ( C) 30 ( 1.1) 35 (1.7) 40 (4.4) 45 (7.2) 50 (10) TC SHC TC SHC TC SHC TC SHC TC SHC 72 (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) (22.2) (19.4) (16.7) LEGEND db Dry-Bulb Temp ( F) Ewb Entering Wet-Bulb Temp ( F) lwb Leaving Wet-Bulb Temp ( F) SHC Sensible Heat Capacity (1000 Btuh) TC Total Capacity (1000 Btuh) NOTES: 1. Ratings based on approximately 15 F superheat leaving coil. 2. Direct interpolation is permissible. Do not extrapolate. 3. Dashes indicate coil loading limits are exceeded. 4. Evaporator fan heat not deducted from ratings. 5. Formulas: Leaving db = entering db - sensible heat capacity (Btuh) 1.1 x cfm wet-bulb temperature corresponding to enthalpy Leaving wb = of air leaving coil (h lwb ) h lwb =h ewb - total capacity (Btuh) 4.5 x cfm where h lwb = enthalpy of air entering coil 6. SHC is based on 80 F db temperature of air entering evaporator coil. 16 Specifications subject to change without notice
17 PERFORMANCE DATA (cont.) HYDRONIC HEATING CAPACITIES UNIT AIRFLOW (Cfm) 1,800 2,400 3,000 2,250 3,000 3,750 3,000 4,000 5,000 4,500 6,000 7,500 1-ROW STEAM* Cap. Ldb Cap. Ldb ROW HOT WATER COIL Water Flow (Gpm) PD ,000 8,000 10, LEGEND: Cap. - Capacity (Btuh in thousands) Ldb - Leaving Air Dry Bulb Temp ( F) PD. - Pressure Drop (ft water) * Based on 5 psig steam, 60 F entering air temperature. All steam coils are non freeze type. Based on 200 F entering water, 20 F water temperature drop, 60 F entering air temperature. NOTES: 1. Maximum operating limits for heating coils: 20 psig at 260 F. 2. Leaving db = ent db ( F) + Capacity (Btuh) 1.1 x cfm 3. See Heating Correction Factors table. HEATING CORRECTION FACTORS Water Temp Drop F ( C) 10 ( 12.2) 20 ( 6.7) 30 ( 1.1) HOT WATER COIL Ent Water Temp F Entering-Air Temp F ( C) ( C) 40 (4.4) 50 (10) 60 (15.6) 70 (21.1) 80 (26.7) 140 (60) (71) (82) (93) (104) (60) (71) (82) (93) (104) (60) (71) (82) (93) (104) STEAM COIL Steam Pressure Entering-Air Temp F ( C) (psig) 40 (4.4) 50 (10) 60 (15.6) 70 (21.1) 80 (26.7) NOTE: Multiply capacity given in the Hydronic Heating Capacities table by the correction factor for conditions at which unit is actually operating. Correct leaving air temperature using formula in Note 2 of Hydronic Heating Capacities table. Specifications subject to change without notice
18 PERFORMANCE DATA (cont.) UNIT AIRFLOW (Cfm) FAN PERFORMANCE DATA in. wg ESP 60 Hz EXTERNAL STATIC PRESSURE (in. wg) Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp 1, , , , , , , , , , , , , , , , , , , , , , , , , LEGEND Bhp Brake Horsepower Input to Fan ESP External Static Pressure Bold indicates field-supplied drive is required. Plain type indicates standard motor and standard drive. Underline indicates a different motor and drive combination other than the standard motor and standard drive combination is required. Refer to fan motor and drive tables to complete selection. For 120, these operating points require different motor and drive combination. 18 Specifications subject to change without notice
19 PERFORMANCE DATA (cont.) UNIT AIRFLOW (Cfm) FAN PERFORMANCE DATA in. wg ESP 60 Hz EXTERNAL STATIC PRESSURE (in. wg) Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp 1, , , , , , , , , , , , , , , , , , , , , , , , , LEGEND Bhp Brake Horsepower Input to Fan ESP External Static Pressure Bold indicates field-supplied drive is required. Plain type indicates standard motor and standard drive. Underline indicates a different motor and drive combination other than the standard motor and standard drive combination is required. Refer to fan motor and drive tables to complete selection. DUCT SOUND POWER LEVELS (Lw) MODEL SIZE CFM db(a) OCTAVE BAND CENTER FREQUENCY (Hz) , , , , , LEGEND: ASHRAE - American Society of Heating, Refrigerating and Air Conditioning, Inc. HVAC - Heating, Ventilation and Air Conditioning NOTES: 1. The above estimated sound power levels are based upon the ASHRAE calculation approach from the ASHRAE HVAC Systems and Applications handbook. 2. Since this data is calculated, these sound power levels may be different than the actual sound power levels. 3. The acoustic center of the unit is located at the geometric center of the unit. Specifications subject to change without notice
20 PERFORMANCE DATA (cont.) FACTORY-SUPPLIED FILTER PRESSURE DROP SIZE UNIT AIRFLOW (Cfm) 1,800 2,400 3,000 2,250 3,000 3,750 3,000 4,000 5,000 4,500 6,000 7,500 6,000 8,000 10,000 PRESSURE DROP (in. wg) ACCESSORY PLENUM AIR THROW DATA (Ft) UNIT AIRFLOW (Cfm) VANE DEFLECTION Straight 21 1 / , , , , , NOTE: Throw distances shown are for 75 fpm terminal velocity. Use the following multipliers to determine throw values for other terminal velocities. TERMINAL VELOCITY (Fpm) THROW FACTOR 50 X X X 0.50 ACCESSORY PRESSURE DROP (in. wg) UNIT AIRFLOW (Cfm) DISCHARGE PLENUM RETURN AIR GRILLE Hot Water Steam Electric ECONOMIZER 072 1,800 2,400 3, ,250 3,000 3, ,000 4,000 5, ,500 6,000 7, ,000 8,000 10, Specifications subject to change without notice
21 ELECTRICAL DATA Table 1 Electrical Data, Standard Motors with Factory Installed Single Speed Fan Option UNIT V PH Hz VOLTAGE LIMITS See: Legend and Notes for Tables 1-4 on page 23. Hp (kw) FAN MOTOR FLA Minimum Circuit Amps POWER SUPPLY MAX FUSE or HACR BRKR 208/ (0.97) / (1.79) (1.79) (0.75) / (1.79) / (1.79) (1.79) (1.49) / (1.79) (1.79) (1.49) / (2.76) (2.76) (2.24) / (3.73) (3.73) (3.73) Table 2 Electrical Data, Alternate Motors with Factory Installed Single Speed Fan Option UNIT V PH Hz VOLTAGE LIMITS See: Legend and Notes for Tables 1-4 on page 23. Hp (kw) FAN MOTOR FLA Minimum Circuit Amps POWER SUPPLY MAX FUSE or HACR BRKR 208/ (1.79) / (2.16) (2.16) (1.49) / (1.79) / (2.16) (2.16) (2.24) / (2.76) (2.76) (2.24) / (3.73) (3.73) (3.73) / (5.59) (5.59) (5.59) Specifications subject to change without notice
22 ELECTRICAL DATA (cont.) Table 3 Electrical Data, Standard Motors with Factory Installed 2 Speed Fan Option UNIT V PH Hz VOLTAGE LIMITS See: Legend and Notes for Tables 1-4 on page 23. Hp (kw) FAN MOTOR FLA Minimum Circuit Amps POWER SUPPLY MAX FUSE or HACR BRKR 208/ (1.79) (1.79) (1.79) / (1.79) (1.79) (1.79) / (1.79) (1.79) (1.79) / (2.76) (2.76) (2.76) / (3.73) (3.73) (3.73) Table 4 Electrical Data, Alternate Motors with Factory Installed 2 Speed Fan Option UNIT V PH Hz VOLTAGE LIMITS See: Legend and Notes for Tables 1-4 on page 23. Hp (kw) FAN MOTOR FLA Minimum Circuit Amps POWER SUPPLY MAX FUSE or HACR BRKR 208/ (2.76) (2.76) (2.76) / (2.76) (2.76) (2.76) / (2.76) (2.76) (2.76) / (3.73) (3.73) (3.73) / (5.59) (5.59) (5.59) Specifications subject to change without notice
23 ELECTRICAL DATA (cont.) Legend and Notes for Tables 1-41 LEGEND: FLA - Full Load Amps MOCP - MAX FUSE or HACR BRKR Motors are designed for satisfactory operation within 10% of normal voltage shown. Voltages should not exceed the limits shown in the Voltage Limits column. NOTES: 4. Minimum circuit amps (MCA) and fuse or HACR breaker values are calculated in accordance with The NEC. Article Motor FLA values are established in accordance with Underwriters' Laboratories (UL). Standard Unbalanced 3 Phase Supply Voltage Never operate a motor where a phase imbalance in supply voltage is greater than 2%. Use the formula in the example (see column to the right) to determine the percentage of voltage imbalance. 7. Installation with Accessory Electric Heaters Size the Field Power Wiring between the heater TB1 and the indoor fan motor per NEC Article (1) or (2) (depends on length of conduit between heater enclosure and power entry location). Install wires in field-installed conduit. Example: Supply voltage is % Voltage Imbalance = 100 x Average Voltage = AB = 393 v BC = 403 v AC = 396 v max voltage deviation from average voltage average voltage ( ) 1192 = 3 3 = 397 Determine maximum deviation from average voltage. (AB) = 4 v (BC) = 6 v (AC) = 1 v Maximum deviation is 4 v. Determine percent of voltage imbalance. % Voltage Imbalance = 100 x = 1.5% This amount of phase imbalance is satisfactory as it is below the maximum allowable 2%. IMPORTANT: If the supply voltage phase imbalance is more than 2%, contact your local electric utility company immediately. Specifications subject to change without notice
24 ELECTRICAL DATA (cont.) Table 5 Electric Heater Data Single Speed Motor HEATER PART NO. CAELHEAT SIZE V-PH-Hz FAN MOTOR Hp kw FLA Nom. Cap. (kw) ELECTRIC HEATER(S) Actual Capacity (kw) Stage 1 Stage 2 Total FLA MCA* MOCP* 001A A00 003A00 004A A00 006A00 007A See: Legend and Notes for Tables 5 and 6 on page Specifications subject to change without notice
25 ELECTRICAL DATA (cont.) Table 5 Electric Heater Data Single Speed Motor (cont) HEATER PART NO. CAELHEAT SIZE V-PH-Hz FAN MOTOR Hp kw FLA Nom. Cap. (kw) ELECTRIC HEATER(S) Actual Capacity (kw) Stage 1 Stage 2 Total FLA MCA* MOCP* 008A A A A A A00 091, A A See: Legend and Notes for Tables 5 and 6 on page 30. Specifications subject to change without notice
26 ELECTRICAL DATA (cont.) Table 5 Electric Heater Data Single Speed Motor (cont) HEATER PART NO. CAELHEAT 016A00 017A00 018A00 019A00 020A00 021A00 022A00 023A00 024A00 025A00 026A00 027A00 SIZE, V-PH-Hz FAN MOTOR Hp kw FLA Nom. Cap. (kw) ELECTRIC HEATER(S) Actual Capacity (kw) Stage 1 Stage 2 Total FLA MCA* MOCP* See: Legend and Notes for Tables 5 and 6 on page Specifications subject to change without notice
27 ELECTRICAL DATA (cont.) Table 6 Electric Heater Data 2 Speed Motor HEATER- PART NO.- CAELHEAT 001A00 002A00 003A00 004A00 005A00 006A00 007A00 008A00 009A00 010A00 SIZE V Ph Hz ELECTRIC HEATER(S) FAN MOTOR Nom. Actual Capacity Cap. HP kw FLA (kw) Stage 1 Stage 2 Total FLA MCA* MOCP* ** ** ** ** ** ** ** ** ** ** ** See: Legend and Notes for Tables 5 and 6 on page 30. Specifications subject to change without notice
DIRECT EXPANSION COMMERCIAL PACKAGED AIR HANDLING UNITS, 6 25 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE
Product Specifications DIRECT EXPANSION COMMERCIAL PACKAGED AIR HANDLING UNITS, 6 25 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE Multi position design for horizontal or vertical installation without
More informationDIRECT EXPANSION COMMERCIAL PACKAGED AIR HANDLING UNITS, 6-25 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE
Product Specifications DIRECT EXPANSION COMMERCIAL PACKAGED AIR HANDLING UNITS, 6-25 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE Multi--position design for horizontal or vertical installation without
More informationDIRECT EXPANSION COMMERCIAL PACKAGED AIR HANDLING UNITS, 6 25 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE
FAS Product Specifications DIRECT EXPANSION COMMERCIAL PACKAGED AIR HANDLING UNITS, 6 25 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE Multi position design for horizontal or vertical installation without
More informationPACKAGED HEAT PUMP AIR HANDLER UNITS, 6 25 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE
Product Specifications COMMERCIAL PACKAGED HEAT PUMP AIR HANDLER UNITS, 6 25 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE Multi position design for horizontal or vertical installation without modification
More informationProduct Data. 40RUQ SplitSystemHeatPump Indoor Unit (Air---Handling Unit) With Puron R Refrigerant 60 Hz FEATURES/BENEFITS
07---25 SplitSystemHeatPump Indoor Unit (Air---Handling Unit) With Puron R Refrigerant 60 Hz Product Data 07-12 16-25 C10887 Carrier s versatile packaged heat pump air-handling units satisfy design requirements
More informationDIRECT EXPANSION COMMERCIAL PACKAGED AIR HANDLING UNITS, 6 25 TONS
Product Specifications DIRECT EXPANSION COMMERCIAL PACKAGED AIR HANDLING UNITS, 6 25 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE Multi position design for horizontal or vertical installation without
More informationProduct Data. 40RUA / 40RUS 6to30TonDirectExpansionwithPuron R Refrigerant 7.5to30TonChilledWater Packaged Air---Handling Units 60 Hz
/ 6toTonDirectExpansionwithPuron R Refrigerant 7.5toTonChilledWater Packaged Air---Handling Units 60 Hz Product Data 07 --- 12 --- C09035 C09036 Carrier s versatile packaged air-handling units satisfy
More informationBAC / BHC Product Specifications
COMMERCIAL AIR HANDLERS (3 PHASE) 6 to 20 TON / Product Specifications REFRIGERATION CIRCUIT Standard factory-installed thermostatic expansion valves (TXVs) on units; units include TXVs and check valves
More informationProduct Data. 40RUA/40RUS 6to30TonDirectExpansion 7.5to30TonChilledWater Packaged Air- Handling Units FEATURES/BENEFITS
/ 6toTonDirectExpansion 7.5toTonChilledWater Packaged Air- Handling Units Product Data 40RU07-40RU - C09035 C09036 Carrier s versatile packaged air-handling units satisfy design requirements with: S Multi-
More informationProduct Data. 40RUA 18.3 to 59.2 kw Direct Expansion Packaged Air---Handling Units 50 Hz
18.3 to 59.2 kw Direct Expansion Packaged Air---Handling Units 50 Hz Product Data 07 --- 12 C09035 Carrier s versatile packaged air-handling units satisfy design requirements with: S Multi-position design
More informationBAC / BHC SERIES 6 to 20 Ton Air Handlers
/ SERIES 6 to 20 Ton Air Handlers COMMERCIAL SPLIT SYSTEM AIR HANDLER FEATURES CONSTRUCTION Die-formed galvanizedsteel casingsprovide durabilityand structuralintegrity. HIGH STATIC DESIGN High static design
More informationBAC / BHC SERIES 6 to 20 Ton Air Handlers
/ SERIES 6 to 20 Ton Air Handlers COMMERCIAL SPLIT SYSTEM AIR HANDLER FEATURES CONSTRUCTION Die-formed galvanizedsteel casingsprovide durabilityand structuralintegrity. HIGH STATIC DESIGN High static design
More informationCHS. Product Specifications COMMERCIAL SPLIT SYSTEMS HEAT PUMP UNITS R 410A, 6 20 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE
CHS Product Specifications COMMERCIAL SPLIT SYSTEMS HT PUMP UNITS R 410A, 6 20 TONS BUILT TO LAST, SY TO INSTALL AND SERVICE Single stage cooling capacity control on 0 to 121 models, two stage cooling
More informationCAS. Product Specifications
CAS Product Specifications COMMERCIAL SPLIT SYSTEMS CONDENSING UNITS R 410A, 6 to 20 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE Single stage cooling capacity control on all 0 to 241 models Two stage
More informationProduct Data. FF1E Base Series Fan Coil Sizes 018 thru 036 FEATURES
Base Series Fan Coil Sizes 018 thru 036 Product Data FEATURES The Series Fan Coil unit is primarily designed for apartment applications as upflow indoor air handlers for split system heat pumps and air
More informationProduct Data FEATURES/BENEFITS. 575J 6 to 20 TONS HEAT PUMP OUTDOOR UNIT SPLIT SYSTEM with PURONr REFRIGERANT 60 Hz
6 to 20 TONS H PUMP OUTDOOR UNIT SPLIT SYSTEM with PURONr REFRIGERANT 60 Hz Product Data the environmentally sound refrigerant 07-12 shown Certified to ISO 9001 C09310 Legacy Line split system heat pump
More informationProduct Data. 40RM/RMS Packaged Air-Handling Units 50/60 Hz 6 to 30 Nominal Tons (21 to 105 kw) 40RM007S-012S 40RMS008S-012S
/RMS Packaged Air-Handling Units 50/60 Hz 6 to 30 Nominal Tons (21 to 105 kw) Product Data S-012S SS-012S 014S-034S S014S-034S Features / Benefits Multiposition design can be installed horizontally or
More informationCAS. Product Specifications
CAS Product Specifications COMMERCIAL SPLIT SYSTEMS CONDENSING UNITS R 410A, 6 to 20 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE Single stage cooling capacity control on all 0 to 150 models Terminal
More informationProduct Data. 40RM, 40RMQ, 40RMS Packaged Air-Handling Units 50/60 Hz. 6 to 30 Nominal Tons (21 to 105 kw) Cooling
Product Data, Q, S Packaged Air-Handling Units 50/60 Hz 6 to 30 Nominal Tons (21 to 105 kw) Cooling Quality Assurance: SAMCO TUV CERT DIN ISO 9001 Certificate Reg. No. 041005420 Deutscher Akkreditierungs
More informationProduct Data PH3Z 13 SEER SINGLE -PACKAGED HEAT PUMP SYSTEM WITH R -22 REFRIGERANT SINGLE AND THREE PHASE 2-5 NOMINAL TONS ( )
13 SEER SINGLE -PACKAGED HEAT PUMP SYSTEM WITH R -22 REFRIGERANT SINGLE AND THREE PHASE 2-5 NOMINAL TONS (024-0) Product Data Fig. 1 - Unit 664B Single -Packaged Heat Pump Units with: S easy installation
More informationProduct Data FF1E LEGACY LINE FAN COIL SIZES 018 THRU 037 FEATURES
LEGACY LINE FAN COIL SIZES 018 THRU 037 Product Data FEATURES The Series Fan Coil unit is primarily designed for apartment applications as upflow indoor air handlers for split-system heat pumps and air
More informationProduct Data. FFMA Base Series Fan Coil Sizes 018 thru 037 FEATURES
FFMA Base Series Fan Coil Sizes 018 thru 037 Product Data A13417 FEATURES The FFMA Series Fan Coil unit is primarily designed for apartment applications as an upflow only indoor fan coil for split -system
More informationDESCRIPTION ACCESSORIES FIELD INSTALLED SPLIT-SYSTEM EVAPORATOR BLOWERS KBBU060, KDBC090, KCBC120 & KCBC180 5 THRU 15 NOMINAL TONS SUPPLY AIR PLENUMS
DESCRIPTION TECHNICAL GUIDE SPLIT-SYSTEM EVAPORATOR BLOWERS KBBU060, KDBC090, KCBC120 & KCBC180 5 THRU 15 NOMINAL TONS These completely assembled units include a well-insulated cabinet, a DX cooling coil
More informationProduct Data. Features/Benefits. Omnizone 50XCA06-14 Air-Cooled Indoor Self-Contained Systems with Puron Refrigerant (R-410A) 5 to 12 Nominal Tons
Product Data Omnizone 50XCA06-14 Air-Cooled Indoor Self-Contained Systems with Puron Refrigerant (R-410A) 5 to 1 Nominal Tons The 50XCA single-package cooling units with integral air-cooled condensers
More informationProduct Data. FF1E Base Series Fan Coil Sizes 018 thru 036 FEATURES
Base Series Fan Coil Sizes 018 thru 036 Product Data FEATURES The Series Fan Coil unit is primarily designed for apartment applications as upflow indoor air handlers for split -system heat pumps and air
More informationProduct Data. Features/Benefits. 38AK AKS with 40RM Commercial Air-Cooled Split Systems 50 Hz
Product Data 38AK007-012 38AKS008-044 with 007-034 Commercial Air-Cooled Split Systems 50 Hz Nominal: 19.0 to 127.0 kw (5.3 to 35.8 Tons) 38AKS013-024 38AK007,008,012 38AKS008,009,012 Features/Benefits
More informationProduct Data. FFMA Base Series Fan Coil Sizes 018 thru 037 FEATURES
FFMA Base Series Fan Coil Sizes 018 thru 037 Product Data A13417 FEATURES The FFMA Series Fan Coil unit is primarily designed for apartment applications as an upflow only indoor fan coil for split -system
More informationProduct Data FFMA BASE SERIES FAN COIL SIZES 018 TO 037 FEATURES
FFMA BASE SERIES FAN COIL SIZES 018 TO 037 Product Data A13417 FEATURES The FFMA Series Fan Coil unit is primarily designed for apartment applications as an upflow only indoor fan coil for split- system
More informationProduct Data. CFM (L/s) Dimensions. Filter Size Ship Wt. H x W x D in. (mm) FMA4P1800AL 1 1/2 18, (212) 675 (319) 36 1/2 x 20 1/2 x 15
Product Data FMA4X, FMA4P APARTMENT FAN COIL UNIT 1 1/2 TONS THROUGH 3 TONS APARTMENT FAN COILS ALL MODELS 1 1/2, 2, 2 1/2, and 3 Tons Upflow application only Accessory field installed electric heat kits
More informationCFM (L/s) Dimensions. Filter Size in. Ship Wt. H x W x D in. (mm) 1800A 1 1/2 18, (212) 675 (319) 36 1/2 x 20 1/2 x 15
ENVIRONMENTALLY SOUND REFRIGERANT FMA4X, FMA4P Product Specifications APARTMENT FAN COILS ALL MODELS 1 1/2, 2, 2 1/2, and 3 Tons Upflow application only Accessory field installed electric heat kits available
More informationCFM (L/s) Min Max 450 (212) 600 (283) 750 (354) Dimensions H x W x D in. (mm) 675 (319) 36 1/2 x 20 1/2 x (425)
ENVIRONMENTALLY SOUND REFRIGERANT FMA4P Product Specifications APARTMENT FAN COILS ALL MODELS 1 1/2, 2, 2.5, and 3 Tons Upflow application only For use with R 410A refrigerant or R 22 with accessory TXV
More informationCFM (L/s) Dimensions. Filter Size Ship Wt. H x W x D in. (mm) 1800Aǂ 1 1/2 18, (212) 675 (319) 36 1/2 x 20 1/2 x 15
ENVIRONMENTALLY SOUND REFRIGERANT FMA4X, FMA4P Product Specifications APARTMENT FAN COILS ALL MODELS 1 1/2, 2, 2 1/2, and 3 Tons Upflow application only Accessory field installed electric heat kits available
More informationProduct Data. FPMA Sizes 018 thru 036 FPMB Sizes 018 thru 030 Base Series Horizontal Fan Coil
FPMA Sizes 018 thru 036 FPMB Sizes 018 thru 030 Base Series Horizontal Fan Coil A13303 Fig. 1 - FPM(A,B)NU Uncased Horizontal Fan Coil (FPMANU model shown) Fig. 2 - FPM(A,B)NC Cased Horizontal Fan Coil
More informationProduct Data. Features/Benefits. 42BH System Fan Coil. 800 to 4000 Cfm
Product Data 42BH System Fan Coil 800 to 4000 Cfm Satisfy All Your Design Requirements with Carrier s Versatile 42BH Fan Coil Unit A selection of 6 sizes covers capacities from 800 to 4000 cfm Choice of
More informationFMU4X, FMC4X FMU4Z, FMC4Z
HORIZONTAL FAN COILS FMU4Z and FMC4Z 1 1/2, 2, 2 1/2, and 3 Tons FMU4X and FMC4X 1 1/2, 2, 2 1/2, and 3 Tons Horizontal application only Accessory field installed electric heat kits available in 3, 5,
More informationProduct Data PF1MNC DIRECT EXPANSION FAN COIL SIZES 018 THRU 061 FEATURES/BENEFITS AVAILABLE SIZES: 18,000 to 61,000 BTU unit ELECTRICAL RANGE:
PF1MNC DIRECT EXPANSION FAN COIL SIZES 018 THRU 061 Product Data FEATURES/BENEFITS AVAILABLE SIZES: 18,000 to 61,000 BTU unit ELECTRICAL RANGE: 40 -va, 208/230 -v transformer, 60 Hz, 1 Phase. FAN MOTOR:
More informationProduct Data. 42D Ducted Fan Coil Air Conditioners cfm
Product Data 42D Ducted Fan Coil Air Conditioners 600-2000 cfm Carrier s 42D series ducted fan coil units offer design and equipment location flexibility Choice of 5 models, each available in 8 sizes For
More information38AUM Air Cooled Condensing Units 50Hz
38AUM Air Cooled Condensing Units 50Hz Quality Assurance Certificate Reg. No: 04 100 950420 Product Data Catalog Subject to change without notice Manufacturer s Name: Saudi Airconditioning Manufacturing
More informationCFM (L/s) Dimensions. Filter Size Ship Wt. HxWxDin.(mm) 1800Aǂ 1-1/2 18, (212) 675 (319) 36-1/2 x 20-1/2 x (45) FMA4P (928 x 521 x 381)
FMA4X, FMA4P Product Specifications APARTMENT FAN COILS ALL MODELS 1-1/2, 2, 2-1/2, and 3 Tons Upflow application only Accessory field- installed electric heat kits available in, 7., or 10 kw 208/230-1-
More informationCOMMERCIAL HIGH EFFICIENCY PACKAGE AIR CONDITIONER UNITS R 22 SINGLE PACKAGE ROOFTOP 3 5 TONS (3 Phase 575 Volt)
PAH Product Specifications COMMERCIAL HIGH EFFICIENCY PACKAGE AIR CONDITIONER UNITS R 22 SINGLE PACKAGE ROOFTOP 3 5 TONS (3 Phase 575 Volt) BUILT TO LAST, EASY TO INSTALL AND SERVICE One piece, high efficiency
More informationAshrae 90.1 EFFICIENCY PACKAGE A/C UNIT to 232 MBtuh. COOLING Rated Unit Model. Unit Dimensions Weight Number *
COMMERCIAL PAE Product Specifications Ashrae 90. EFFICIENCY PACKAGE A/C UNIT - 80 to 232 MBtuh REFRIGERATION CIRCUIT All models are equipped with high efficiency scroll compressor on each circuit. Dual,
More informationProduct Data. 38AUZ/D 50 Hz Commercial Split Systems Air Conditioning Condensing Units 18.3 kw to 59.2 kw FEATURES/BENEFITS
Z/D 50 Hz Commercial Split Systems Air Conditioning Condensing Units 18.3 kw to 59.2 kw Product Data FURES/BENEFITS These dependable outdoor air cooled condensing units match Carrier s indoor-air handlers
More informationProduct Data. Features/Benefits. 50SZ SINGLE-PACKAGED HEAT PUMP UNITS 2 to 5 Nominal Tons
SINGLE-PACKAGED HEAT PUMP UNITS 2 to 5 Nominal Tons Product Data UNIT (STANDARD) Single-Packaged Heat Pump for Residential and Light Commercial Applications Low Sound Levels 13 SEER Features/Benefits One-piece
More informationCAS. Product Specifications. COMMERCIAL SPLIT SYSTEMS CONDENSING UNITS R 410A, 6 to 20 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE
COMMERCIAL SPLIT SYSTEMS CONDENSING UNITS R 410A, 6 to 20 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE Single stage cooling capacity control on all 0 241 models Two stage cooling capacity control on
More informationProduct Data. Features/Benefits. OMNIZONE 50XCR06-24 Remote Air-Cooled Indoor Self-Contained Systems with PURON Refrigerant (R-410A)
Product Data OMNIZONE 50XCR06-24 Remote Air-Cooled Indoor Self-Contained Systems with PURON Refrigerant (R-410A) 5 to 20 Nominal Tons The 50XCR single-package remote aircooled units offer: Compact, durable,
More informationBHH Product Specifications
BHH Product Specifications HORIZONTAL BELT DRIVE DIRECT EXPANSION BLOWER COIL UNITS ALL S 3, 4, and 5 Ton 208/230 3 60 and 460 3 60 supply voltage Units are ETL listed to U.S. and Canadian safety standards
More informationCOMMERCIAL STANDARD EFFICIENCY PACKAGE GAS / ELECTRIC UNIT R -22 SINGLE PACKAGE ROOFTOP TONS (3 PHASE)
PGS Product Specifications COMMERCIAL STANDARD EFFICIENCY PACKAGE GAS / ELECTRIC UNIT R -22 SINGLE PACKAGE ROOFTOP -2 TONS ( PHASE) REFRIGERATION CIRCUIT All models are equipped with high efficiency scroll
More informationTECHNICAL GUIDE GENERAL SPECIFICATIONS COMMERCIAL SPLIT-SYSTEM COOLING UNITS FOUR PIPE SYSTEM OUTDOOR UNIT:
036-21323-001-B-0202 GENERAL SPECIFICATIONS OUTDOOR UNIT: Two independent refrigerant circuits Inherently protected fan motors Two independent scroll compressors V-Coil Design Exterior service port connections
More informationTons BTU/h S.E.E.R* E.E.R** HSPF
SOUND REFRIGERANT ENVIRONMENTALLY PHD3 Product Specifications 13 SEER, R -410A PACKAGE HEAT PUMP, 2½ to 5 TONS 3 -Phase, 208/230-3 -60 and 460-3 -60 REFRIGERATION CIRCUIT R--410A refrigerant Copper tube/aluminum
More informationQ6SP Series Rev A TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 7.5 and 10 Ton Packaged Electric Heat Pump Units with R-410A 11.
TECHNICAL SPECIFICATIONS Q6SP Series Rev A 7.5 and 10 Ton Packaged Electric Heat Pump Units with R-410A 11.0 EER Commercial Systems Meet or Exceed ASHRAE 90.1-2010 These 7½ and 10 ton units are designed
More informationHigh Cap. (Btuh) HSPF COP
RHS Product Specifications PACKAGE HEAT PUMP UNIT R 410A SINGLE PACKAGE ROOFTOP 3 12.5 TONS (1 & 3 Phase) BUILT TO LAST, EASY TO INSTALL AND SERVICE R 410A HFC refrigerant ASHRAE 90.1 Energy Compliant
More informationOperating Net Capacity BTU/h. Input BTU/h Efficiency. lbs (kg) PGR524040KGP* 23, ,000/26, /8 x 47 x 31-7/16
SOUND REFRIGERANT ENVIRONMENTALLY Product Specifications UP to 16 SEER, UP to 12.5 EER, PACKAGE GAS / ELECTRIC, 2 to 5 TONS 208/230 Volt, 1 phase, 60 Hz 208/230 Volt, 3 phase, 60 Hz REFRIGERATION CIRCUIT
More informationThe Premium Quality Fan Coil Units for Horizontal Application Hydronic or Electric Heat
Producing Quality Heating & Cooling Equipment For Over 50 Years CEA SERIES CEILING EPOSED HORIZONTAL FAN COIL UNITS The Premium Quality Fan Coil Units for Horizontal Application Hydronic or Electric Heat
More informationPERFORMANCE DATA TYPICAL FIELD WIRING CERTIFIED DIMENSION PRINT CERTIFIED ROOF CURB DIMENSION PRINTS
50FN-1SB 50FNX,FNY078,088,104 SINGLE-PACKAGE COOLING UNITS CONSTANT/VARIABLE AIR VOLUME PRODUCT INTEGRATED CONTROLS CARRIER COMFORT NETWORK COMPATIBLE WITH INTEGRAL ECONOMIZER AND HIGH-CAPACITY MODULATING
More informationELITE SERIES R-410A Ready - Multi-Position
PRODUCT SPECIFICATIONS AIR HANDLERS CBXM ELITE SERIES R-0A Ready - Multi-Position Bulletin No. 0 October 07 Supersedes June 0 Nominal Capacity -. to Tons Optional Electric Heat -. to 0 kw MODEL NUMBER
More informationModel 558D/559F Sizes
Bryant Air Conditioning COMMERCIAL SINGLE-PACKAGE ROOFTOP ELECTRIC COOLING UNITS Model 558D/559F Sizes 036-300 3to25Tons Model 558D036-072 Model 559F180,216 Model 558D090-150 Model 559F240,300 DESCRIPTION
More informationCHP
Packaged Unit Heat Pump CHP16-024-030-036-048-060 2-5 Ton Cooling 23,000-57,500 Btuh Heating 12,800-85,300 Btuh (5-25 kw) Optional Electric Heating FEATURES Designed for outdoor rooftop or ground level
More informationProduct Data. Features/Benefits. 50TFQ Single-Package Standard Efficiency Rooftop Heat Pump Units. 3 to 10 Nominal Tons
Product Data 50TFQ004-012 Single-Package Standard Efficiency Rooftop Heat Pump Units 3 to 10 Nominal Tons Single-package standard efficiency rooftop heat pumps with: State-of-the-art defrost system Dependable
More informationCOMMERCIAL ASHRAE EFFICIENT PACKAGE AIR CONDITIONER UNITS R 22 SINGLE PACKAGE ROOFTOP 6 25 TONS (3 Phase)
PAE Product Specifications COMMERCIAL ASHRAE EFFICIENT PACKAGE AIR CONDITIONER UNITS R 22 SINGLE PACKAGE ROOFTOP 6 25 TONS (3 Phase) BUILT TO LAST, EASY TO INSTALL AND SERVICE One piece, high efficiency
More informationSPLIT-SYSTEM EVAPORATOR BLOWER DESCRIPTION ACCESSORIES EER 8.5 ARI RATINGS* K2ES120A25 10 NOMINAL TONS WITH TWO 5 TON CIRCUITS
550.13-TG11Y (0500) SPLIT-SYSTEM EVAPORATOR BLOWER K2ES120A25 10 NOMINAL TONS WITH TWO 5 TON CIRCUITS EER 8.5 DESCRIPTION This completely assembled dual circuit evaporator blower includes a well-insulated
More informationProduct Data. Features/Benefits. 38HDL Cooling Only Condensing Unit. 1 1 / 2 to 5 Nominal Tons
Product Data 38HDL018-060 Cooling Only Condensing Unit 1 1 / 2 to 5 Nominal Tons The 38HDL energy-efficient condensing unit incorporates innovative technology to provide reliable cooling performance. Built
More informationDIRECT-DRIVE BLOWER FAN COIL AIR CONDITIONER ENGINEERING GUIDE
DIRECT-DRIVE BLOWER FAN COIL AIR CONDITIONER ENGINEERING GUIDE Model: YSHW-DD 00784VIP Introduction YORK DIRECT DRIVE FAN COIL UNITS The YORK Fan Coil Unit is designed for many exposed and concealed applications.
More informationD M S 760 C01 A A 1 1
CONTENTS Description Features Options Available Selection Method Product Data Cooling Performance Data (85 F Ambient Cooling Performance Data (95 F Ambient) Cooling Performance Data (105 F Ambient)..............................
More informationProduct Data. Features/Benefits
Product Data 50TFF007-014 Single-Package Rooftop Units Electric Cooling with Electric Heat Option 50 Hz Nominal Capacity: 17.6 kw to 35.9 kw (5 to 10.2 Tons) Single-Package Rooftop Units with: Galvanized
More informationProduct Data. Features/Benefits
Product Data 50TFQ008-012 Single-Package Standard Efficiency Rooftop Heat Pump Units 50 Hz Nominal Capacities: 26.4 to 35.2 kw (7 1 / 2 to 10 Nominal Tons) Single-package standard efficiency rooftop heat
More informationS/T Ratio. Input BTU/h
SOUND REFRIGERANT ENVIRONMENTALLY PGD3 Product Specifications 13 SEER PACKAGE GAS / ELECTRIC UNIT, 2½ to 5 TONS 3 Phase, 208/230 3 60 and 460 3 60 REFRIGERATION CIRCUIT Environmentally sound R-410A refrigerant
More informationProduct Data. Features/Benefits. 50TJQ Single-Package Standard Efficiency Rooftop Heat Pump Units. 3 to 10 Nominal Tons
Product Data 50TJQ004-012 Single-Package Standard Efficiency Rooftop Heat Pump Units 3 to 10 Nominal Tons Single-package standard efficiency rooftop heat pumps with: State-of-the-art defrost system Dependable
More informationProduct Data. Features/Benefits 50JS SINGLE-PACKAGED HEAT PUMP 50 HZ UNITS 7 TO 18 KW (2 TO 5 NOMINAL TONS)
SINGLE-PACKAGED HEAT PUMP 50 HZ UNITS 7 TO 18 KW (2 TO 5 NOMINAL TONS) Product Data UNIT (50 Hz) Single-packaged Heat Pump for Residential and Light Commercial applications. Features/Benefits One-piece
More informationtechnical sales guide - 60Hz Ducted Split Units HIGH AMBIENT OPERATION 52 UPTO
technical sales guide - 60Hz Taurus R Ducted Split Units UPTO HIGH AMBIENT OPERATION 52 O C Page CONTENTS Nomenclature.. 2 Description. 3 Features.. 3 Product Data. 4 Condensing Unit Cooling Performance
More informationZHA/ZHB SERIES WARNING
Service Literature Corp. 09-L Revised 7-08 ZHA/ZHB SERIES, 4, 5 and 6 ton 0.6 to kw ZHA/ZHB06, 048, 060, 07 The ZHA/ZHB packaged electric heat pump units are available in standard cooling efficiency (06S,
More informationProduct Data. 50HCQ High Efficiency Packaged Rooftop Heat Pump Units 3to10Tons C Except 04 models in single phase
50HCQ High Efficiency Packaged Rooftop Heat Pump Units 3to10Tons Product Data C10222 Except 04 models in single phase Use of the AHRI Certified TM Mark indicates a manufacturer s participation in the program
More informationPHR5. Product Specifications
PHR5 Product Specifications UP to 15.5 SEER, UP to 12.5 EER, PACKAGE HEAT PUMP UNITS, 2 5 TONS 208/230 Volt, 1 phase, 60 Hz 208/230 Volt, 3 phase, 60 Hz REFRIGERATION CIRCUIT Environmentally balanced R
More informationModels 542J, 548F, 549B, 549C SINGLE PACKAGE ROOFTOP
COMMERCIAL Models 542J, 548F, 549B, 549C SINGLE PACKAGE ROOFTOP Sizes 024-180 STANDARD AND HIGH EFFICIENCY DuraPac and DuraPac Plus HEAT PUMP UNITS 2 to 15 Tons 50-1219 548F036-072 549B036-072 50-1304
More informationAVPTC. Multi-Position, Variable-Speed, ECM-Based Air Handler with Internal TXV ComfortNet Compatible 1½ to 5 Tons. Contents.
Multi-Position, Variable-Speed, ECM-Based Air Handler with Internal TXV ComfortNet Compatible 1½ to 5 Tons Contents Air Handler Nomenclature... 2 Heater Kit Nomenclature... 2 Product Specifications...
More informationComplete HVAC Capability
Air Handling Units Brochure 1110 January 2006 Complete HVAC Capability MEA Horizontal Draw-Thru to Size 65 Vertical Draw-Thru to Size 50 1000 to 60,000 CFM Forward Curved or Airfoil Wheels Inlet Vane Option
More informationTECHNICAL GUIDE DESCRIPTION MODELS: D4HH 024 THRU 180 HORIZONTAL FEATURES SINGLE PACKAGE AIR CONDITIONERS HORIZONTAL INDOOR & CONDENSER AIR FLOW
DESCRIPTION TECHNICAL GUIDE SINGLE PACKAGE AIR CONDITIONERS HORIZONTAL INDOOR & CONDENSER AIR FLOW MODELS: D4HH 024 THRU 180 York horizontal ductable air conditioning packages offer a complete line of
More information50 Hz AIR - COOLED SPLIT SYSTEM. Products That Perform...By People Who Care AIR CONDITIONERS WITH SCROLL COMPRESSORS
R FORM NO: MS0305F Products That Perform...By People Who Care AIR - COOLED SPLIT SYSTEM AIR CONDITIONERS WITH SCROLL COMPRESSORS 50 Hz COOLING CAPACITY- 60 MBH TO 1360 MBH ACCS SERIES HEB-D, EB-D SERIES
More informationProduct Data. Features/Benefits. 50TJ Single-Package Rooftop Units Electric Cooling with Electric Heat Option 50 Hz, CE Units
Product Data 50TJ008-014 Single-Package Rooftop Units Electric Cooling with Electric Heat Option 50 Hz, CE Units Nominal Capacity: 21.5 kw to 35.9 kw (6.1 to 10.2 Tons) Single-Package Rooftop Units with:
More informationAPARTMENT FAN COILS AVAILABLE WITH FACTORY INSTALLED 5, 7, & 11 kw ELECTRIC HEAT, or NO HEAT R-410A and R-22 SYSTEMS
FSA Product Specifications APARTMENT FAN COILS AVAILABLE WITH FACTORY INSTALLED 5, 7, & 11 kw ELECTRIC HEAT, or NO HEAT R-410A and R-22 SYSTEMS 1½ THRU 3 TONS FEATURES TXV metering device factory installed
More informationQ6SP Series Rev A TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 7.5 and 10 Ton Packaged Electric Heat Pump Units 11.0 EER
TECHNICAL SPECIFICATIONS Q6SP Series Rev A 7.5 and 10 Ton Packaged Electric Heat Pump Units 11.0 EER Commercial Systems Meet or Exceed ASHRAE 90.1-2010 These 7½ and 10 ton units are designed specifically
More informationCAC SERIES 12-1/2 Thru 20 Ton
CAC SERIES 12-1/2 Thru 20 Ton SPLIT SYSTEM COMMERCIAL AIR CONDITIONER CONSTRUCTION Triple step pre--painted galvanized steal pre--coated inside and out -- using a polyester top coat, over a urethane primer
More information6-1/3 and 7-1/2 Ton Split System Air Conditioner (3 Phase) 75 to 89 MBtuh R -22 Refrigerant. Nominal Capacity BTUH
CAE Product Specifications 6-1/3 and 7-1/2 Ton Split System Air Conditioner (3 Phase) 75 to 89 MBtuh R -22 Refrigerant REFRIGERATION CIRCUIT Copeland scroll compressors on all models with single refrigeration
More informationProduct Data. 50ZPA Single---Packaged Air Conditioner System 2 to 5 Nominal Tons ( )
Single---Packaged Air Conditioner System 2 to 5 Nominal Tons (024---060) Product Data Unit A05194 The unit is a packaged air conditioner for manufactured housing, residential, and light commercialapplications.
More informationPCB COMMERCIAL SERIES
PCB COMMERCIAL SERIES 50 Hz SELF-CONTAINED PACKAGE CONDITIONER 7½, 0, AND 5 TON [6.4 kw to 5.8 kw] COOLING CAPACITY: 90,000 TO 80,000 BTU/H The PCB Commercial 50 Hz self-contained packaged air conditioner
More informationSINGLE PACKAGE AIR CONDITIONING WATER COOLED
MODELS: CU060-300 5-25 TONS VERTICAL SINGLE PACKAGE AIR CONDITIONING WATER COOLED MODELS: CH060-5-10 TONS HORIZONTAL FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE TABLE OF CONTENTS
More informationP6SP Series Rev A TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 6, 7½ and 10 Ton Packaged Electric Cooling Units EER Commercial System Units
TECHNICAL SPECIFICATIONS P6SP Series Rev A 6, 7½ and 10 Ton Packaged Electric Cooling Units 11.2 EER Commercial System Units These units are designed specifically for retrofit applications and compatibility
More informationProduct Data. 50TCQ Packaged Heat Pump 3to12.5NominalTons C08613
Packaged Heat Pump 3to12.5NominalTons Product Data C08613 Use of the AHRI Certified TM Mark indicates a manufacturer s participation in the program For verification of certification for individual products,
More informationBCE5E PRODUCT SPECIFICATIONS ENHANCED AIR HANDLER APPLICATION INSTALLATION CABINET COILS COMPONENTS WARRANTY
PRODUCT SPECIFICATIONS APPLICATION 2-5 ton systems Sequenced for demand management External access to heater circuit breakers FORM NO. -100 (11/2018) INSTALLATION One piece design Smaller profile for closet
More informationSPLIT-SYSTEM AIR-COOLED CONDENSING UNITS DESCRIPTION FEATURES H2CA300, 360, 480 & THRU 50 NOMINAL TONS
550.13-TG1Y(98) SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS HCA300, 360, 80 & 600 5 THRU 50 NOMINAL TONS HCA80 DESCRIPTION These units are completely assembled, piped and wired at the factory to provide one-piece
More informationProduct Data. 50TCQ Packaged Heat Pump 3to12.5NominalTons C08613
Packaged Heat Pump 3to12.5NominalTons Product Data C08613 Use of the AHRI Certified TM Mark indicates a manufacturer s participation in the program For verification of certification for individual products,
More informationARUF Series. Multi-Position, Multi-speed Air Handler with PSC Motor 1½ to 5 Tons. Contents. Product Features
Series Multi-Position, Multi-speed Air Handler with PSC Motor 1½ to 5 Tons Contents Nomenclature... 2 Product Specifications... 3 Heater Kit Nomenclature... 3 Dimensions... 4 Airflow Data... 5 Heat Kit
More informationSUNLINE 2000 (WORLD 50 HZ)
530.26-TG1YI (298) SINGLE PACKAGE AIR-COOLED AIR CONDITIONERS D3CE 036, 048, 060 & 076 D5CG 036, 048, 060 & 076 3, 4, 5 AND 6 NOMINAL TONS SHOWN SUNLINE 2000 (WORLD 50 HZ) DESCRIPTION YORK Sunline 2000
More informationN4A6. Product Specifications
ENVIRONMENTALLY SOUND REFRIGERANT N4A6 Product Specifications EFFICIENT UP TO 16.5 SEER/12.2 13.0 EER AIR CONDITIONER ENVIRONMENTALLY SOUND R 410A REFRIGERANT 1 1/2 THRU 5 TONS SPLIT SYSTEM 208/2 Volt,
More information36CWA4-HW 4-Pipe Chilled & Hot Water Air Handler (120V) 4-Pipe Heat & Cool Fan Coil 36,000 BTUH
36CWA4-HW 4-Pipe Chilled & Hot Air Handler (120V) 4-Pipe Heat & Cool Fan Coil 36,000 BTUH Rev. 1.2 HVAC Guide Specifications Chilled & Hot Multi-Position Fan Coil 4-Pipe Nominal Size: 36,000 BTUH Multiaqua
More informationSizes 156, 180. COOLING HEATING (High Temp) Unit Dimensions. COOLING HEATING (High/Low) Unit Dimensions
PHH Product Specifications COMMERCIAL HIGH EFFICIENCY PACKAGE HEAT PUMP UNITS R 22, SINGLE PACKAGE ROOFTOP, 3 15 TONS (3 Phase) BUILT TO LAST, EASY TO INSTALL AND SERVICE One piece, high efficiency heat
More informationProduct Data. Features/Benefits. 50TFF Single-Package Rooftop Units Electric Cooling with Electric Heat Option. 3 to 12.
Product Data 50TFF004-014 Single-Package Rooftop Units Electric Cooling with Electric Heat Option 3 to 12.5 Nominal Tons Standard-Efficiency Rooftop Units with: Pre-painted galvanized steel cabinet for
More information14 SEER, 12 EER PACKAGE AIR CONDITIONER, 2 to 5 TONS 208/ Single Phase
COMMERCIAL SOUND REFRIGERANT ENVIRONMENTALLY PAD4 Product Specifications 14 SEER, 12 EER PACKAGE AIR CONDITIONER, 2 to 5 TONS 208/230 1 60 Single Phase REFRIGERATION CIRCUIT Environmentally sound R-410A
More informationPERFORMANCE DATA TYPICAL FIELD WIRING CERTIFIED DIMENSION PRINTS CERTIFIED ROOF CURB DIMENSION PRINTS
50FP-1SB 50FP034, 038, 044, 048, 054, 064, 074 SINGLE-PACKAGE COOLING UNITS CONSTANT/VARIABLE VOLUME PRODUCT INTEGRATED CONTROLS CARRIER COMFORT NETWORK COMPATIBLE FACTORY-INSTALLED OPTIONAL ELECTRIC HEAT
More information24CWA4-HW 4-Pipe Chilled & Hot Water Air Handler (120V)
24CWA4-HW 4-Pipe Chilled & Hot Air Handler (120V) 4-Pipe Heat & Cool Fan Coil 24,000 BTUH Rev. 1.2 HVAC Guide Specifications Chilled & Hot Multi-Position Fan Coil 4-Pipe Nominal Size: 24,000 BTUH Multiaqua
More informationGPC14H. 2- to 5-Ton Packaged Air Conditioner 14 SEER. Cooling Capacity: 24,000-57,500 BTU/H
H Cooling Capacity: 24,000-57,500 BTU/H 2- to 5-Ton Packaged Air Conditioner 14 SEER Contents Nomenclature... 2 Product Specifications... 3 Expanded Cooling Data... 4 Airflow Data... 16 Heater Kit Specifications...
More information