SC750, SC800 SC750 ST, SC800 ST

Transcription

1 SC750, SC800 SC750 ST, SC800 ST PARTS LIST Advance Models: (SC750-26D), (SC750-28D) (SC750-28C), (SC750 ST-26D) (SC750 ST-28C), (SC800-28D) (SC800-28C), (SC800-32C) (SC800-34D), (SC800 ST-34D) 7/10 revised 3/11

2 2 TABLE OF CONTENTS DESCRIPTION PAGE Battery Charger System... 3 Chassis System-Disk Chassis System-Cylindrical Chemical Injection System-EcoFlex... 8 Control System-SC750, SC Control System-SC750 ST, SC800 ST Decal System...11 Electrical System-SC750, SC Electrical System-SC750 ST, SC800 ST Recovery System Scrub System-Disk Scrub System-Cylindrical Solution System Squeegee Assy Squeegee System Ladder Diagram-SC750, SC Ladder Diagram-SC750 ST, SC800 ST Optional Kits and Accessories Brush Selector Guide-Disk Brush Selector Guide-Cylindrical Squeegee Blade Selector Guide WHEN ORDERING PARTS * Use the part numbers from the Ref. No. columns in this parts list. * Specify the model and serial number of the machine. * Use the space below to record the model and serial number for future reference. Model Serial No.

3 10-7 BATTERY CHARGER SYSTEM Wsh, Flt.193 X.875 X Battery Charger 24V 25A (A3) Charger Cord, Us Tie, Cable Cable Support Screw M5-.8 X 16mm Pn St Ph Washer, Lock 1/ a 4 Screw, M6-1 X a 4 Washer, 1/4 Flat S.S.

4 4 CHASSIS SYSTEM-DISK a

5 10-7 CHASSIS SYSTEM-DISK Tube Jack Motor a 1 Chassis, Wldmt a 1 Bracket, Solution Valve a 8 Screw, M10xm12x16mm S.B.S.H a 8 Bushing, Flanged Spacer Wsh, Flt Sae # Scr, Pan Phil Thd Form X Tire Solenoid Valve Assy (L1) Transaxle 11a# Flange Kit (for ) *# 50981A 1 Motor-Transaxle (for ) (M1) *# 40628A 4 Carbon Brush (for ) Connector Bracket Clamp, Hose Support Tie, Cable Spacer 6.1 X 10 X Caster, Rear Spacer Lever, Brush Head Lift Support, Jack Motor Bracket, Filter A 1 Actuator (M2) Filter, Water *# Filter and Seal (for ) Lever a 1 Gas Spring 500n a 9 Nut, M Nylock 26 E Spring Washer, Flat 5/ Clamp, Hose Washer,.31 I.D. X 1.06 O.D Washer, 1/4 Starlock, External Washer 17/32 X 1 1/16 Plain Washer, 5/16 Lock a 1 Hose, Clear X25.00 Long a 1 Hose, Clear X 3.00 Long a 1 Screw, M6-1 X a 2 Spacer,.590od X.328id a 1 Bracket, Ground Strap a 1 Strap, Static a 1 Label, Moving Parts a 2 Screw, M4-.7x a 8 Bolt, M X 20, Hex a 9 Nut, M Nylock S.S a 4 Nut, M Nylock S.S a 1 Screw, M6 X 1.00 X 10mm Pan Head a 2 Screw, M6 X 1 X a 2 Washer, 1/4 Flat S.S a 3 Washer Fender a 7 Washer, Flat M a 10 Washer, Lock M a 10 Screw, M X 20mm a 1 Screw, Hex Hd M10x a 2 Nut, M12 Nylon Insert a 1 Screw, Hex Hd M12x a 1 Screw, Hex Hd M12x a 2 Nut, M4-.7 Nylock Insert a 4 Screw, M5 X 12mm Hex Self Tap Tri-Lobe a 1 Screw M6-1 X 40mm Hex Screw, M8 X 90 Hex Head a 1 Screw, M8 X75 Hex Head * = Optional, Not Included # = Revised or new since last update

6 CHASSIS SYSTEM-CYLINDRICAL a

7 10-7 CHASSIS SYSTEM-CYLINDRICAL Tube Jack Motor a 1 Chassis, Wldmt a 1 Bracket, Solution Valve a 8 Screw, M10xm12x16mm S.B.S.H a 8 Bushing, Flanged Wsh, Flt Sae # Pin, Cotter Hair Pin-Clevis.375 X Scr, Pan Phil Thd Form X Tire Solenoid Valve Assy (L1) Transaxle 12a# Flange Kit (for ) *# 50981A 1 Motor-Transaxle (for ) (M1) *# 40628A 4 Carbon Brush (for ) Connector Bracket Extension Spring-.81x Clamp, Hose Support Tie, Cable Spacer 6.1 X 10 X Caster, Rear Spacer Lever, Brush Head Lift Support, Jack Motor Bracket, Filter A 1 Actuator (M2) Filter, Water *# Filter and Seal (for ) Lever a 9 Nut, M Nylock 27 E Spring Washer, Flat 5/ Clamp, Hose Washer,.31 I.D. X 1.06 O.D Washer, 1/4 Starlock, External Washer 17/32 X 1 1/16 Plain Washer, 5/16 Lock a 1 Hose, Clear X25.00 Long a 1 Hose, Clear X 3.00 Long a 1 Screw, M6-1 X a 1 Bracket, Ground Strap a 1 Strap, Static a 1 Label, Moving Parts a 2 Screw, M4-.7x a 8 Bolt, M X 20, Hex a 9 Nut, M Nylock S.S a 4 Nut, M Nylock S.S a 1 Screw, M6 X 1.00 X 10mm Pan Head a 2 Screw, M6 X 1 X a 2 Washer, 1/4 Flat S.S a 3 Washer Fender a 7 Washer, Flat M a 10 Washer, Lock M a 10 Screw, M X 20mm a 1 Screw, Hex Hd M10x a 2 Nut, M12 Nylon Insert a 1 Screw, Hex Hd M12x a 1 Screw, Hex Hd M12x a 2 Nut, M4-.7 Nylock Insert a 4 Screw, M5 X 12mm Hex Self Tap Tri-Lobe a 1 Screw M6-1 X 40mm Hex Screw, M8 X 90 Hex Head a 1 Screw, M8 X75 Hex Head Spacer * = Optional, Not Included # = Revised or new since last update

8 8 CHEMICAL INJECTION SYSTEM-EcoFlex ATTACH THIS END TO PUMP OUTLET 9 ATTACH THIS END TO CHEMICAL PUMP INLET ATTACH SOLUTION HOSE HERE ATTACH TO SOLENOID VALVE Scr, Pan Phil Thd Form 6-32 X Decal-Chemical Ratio Bracket-Bottle Support Bracket-Pump Mount 5# Clamp- Hose Hose, Chem Resistant, Tee Assembly Pump-Chemical (M6) Cap, Raw Cap, Dry Break, 1/8 Barb, 90 $ Insert, Dry Break Tie, Cable Hose, Pvc Clear 2.5 Inch Hose, Chem Resistant, Chemical Bottle Assy * Chemical Bottle Assy (Includes 9, 11 &15) 16# Wsh-Flat SAE 1/4 17# Scr-Pan Phil M6-1 X 16mm * = Optional, Not Included # = Revised or new since last update

9 10-7 CONTROL SYSTEM-SC750, SC Paddle Assembly (1-22) Potentiometer Fork Potentiometer-Speed Limit (R2) Potentiometer-5k (R1) Wsh, Flt Sae # Scr, Pan Phil Plastite 6-18 X Scr, Pan Phil Plastite 1/4-1 X Scr, Pan Phil Plastite 8-10 X Scr, Pan Phil Thd Form X Wsh, Flt.193 X.875 X Scr, Pan Phil Type B 8 X Paddle-Back Cover Harness-Paddle Paddle, Front Cover Weldment-Handle Bar Knob Spring - Compression Cam Controller Sleeve Washer, Plastic Clamp Tie, Cable Clamp-P Scr-Hex 5/16-18 x 1.50

10 10 CONTROL SYSTEM-SC750 ST, SC800 ST Handle Assembly (1-10) Scr-Pan Phil X Scr, Flt Phil X Harness-Handle Knob Handle, Rotomold Access Plate Gasket, Access Panel Palm Switch Assembly (S4 / S5) Switch, Spst Mom. (S6) Potentiometer-Speed Limit (R2) Scr-Hex SS M x 40mm Squeegee Holder Wsh-Flt SAE 1/ Scr-Pan Phil 1/4-20 x Wsh-Flt SAE 5/16

11 10-7 DECAL SYSTEM Decal, Caution Decal-Advance Decal, Charger Decal-Circuit Breaker Decal-SC Decal-SC Decal-SC750 ST Decal-SC800 ST Decal-SC750 EcoFlex Decal-SC800 EcoFlex Decal-Error Codes A 1 Decal-NFSI Decal-Warning/Wiring

12 12 ELECTRICAL SYSTEM-SC750, SC Part of Main Harness

13 ELECTRICAL SYSTEM-SC750, SC Scr-Pan Phil 8-32 X Scr-Pan Phil 1/4-20 X Scr-Pan Phil 1/4-20 X Nut, Hex W/ Shprf 1/ Scr, Hex Ss M6-1 X 25mm Scr, Hex M6-1 X 45mm Scr- Truss Phil Blk M5-0.8 X 12mm Scr-Pan Phil Blk 6-32 x Scr-Pan Phil M4-0.7 x 8mm Stud Stud, 1/ Control Panel Electrical Panel Kit AXP Control Board [ ] Switch-Key (S3) *# Replacement Key Set (for ) * Kit-Interface Panel (Membrane Switch, Membrane Panel, Gasket) 15# Plate-Circuit Breaker NOTE 1 16# DELETED [17] Cable-Jumper [18] Harness-Main Speed Controller 70a 24v (A2) Connector Assy Connector Assy Circuit Breaker, 30 Amp (CB1) Boot-Battery Post Contactor, 24v Spdt (K2) A 3 Cable,Battery Fuse, 150 Amp (F1) Electrical Mount Tie, Cable Circuit Breaker, 10 Amp (CB2) Washer 7/16 Od X.036 Thk a 2 Relay, 40A (K1 / K3) a 2 Screw, M5 X 0.8 X 10mm P.H a 2 Screw, Hex Thd To Hd M5x a 2 Screw, 8-32 X 1 1/4 P.H Washer a 2 Washer, 1/4 Flat S.S Bracket-PCB Mount Wsh-Flt SAE 8 [ ] Kit-EMC Filter-Cyl (Canada Only) [ ] Nut Hex M4 [ ] Scr Pan Phil M3.9 X 12.0 [ ] Assy-Emc Filter Brush Motor [ ] Assy-Emc Filter Transaxle [ ] Bracket-Filter [ ] Bracket-Filter Mount [ ]# Scr-Pan Phil 1/4-20 X.62 [ ] Nut, Hex Nyl Loc Ss 1/4-20 [ ] Kit-EMC Filter-Disc (Canada Only) [ ] Scr Hex Thd/Hd M6-1.0 X 16mm [ ] Nut Hex M4 [ ] Scr Pan Phil M3.9 X 12.0 [ ] Nut Hex Nyl Loc M6 X 1.00 [ ] Assy-Emc Filter Brush Motor [ ] Assy-Emc Filter Transaxle [ ] Filter Mount Weldment [ ] Bracket-Filter Mount [ ]# Scr-Pan Phil 1/4-20 X.62 [ ] Nut, Hex Nyl Loc Ss 1/4-20 [ ] = Not Shown * = Optional, Not Included # = Revised or new since last update #NOTE 1: Circuit Breaker Plate is obsolete and has been replaced by

14 14 ELECTRICAL SYSTEM-SC750 ST, SC800 ST Part of Main Harness

15 ELECTRICAL SYSTEM-SC750 ST, SC800 ST Scr-Pan Phil 8-32 X Scr-Pan Phil 1/4-20 X Scr-Pan Phil 1/4-20 X Nut, Hex W/ Shprf 1/ Scr, Hex Ss M6-1 X 25mm Scr, Hex M6-1 X 45mm Scr- Truss Phil Blk M5-0.8 X 12mm Scr-Pan Phil Blk 6-32 x Scr-Pan Phil M4-0.7 x 8mm Stud Stud, 1/ Control Panel Electrical Panel Kit ST Control Board [ ] Switch-Momentary Rocker (S7 / S8 / S9) [ ] Switch-Key (S3) *# Replacement Key Set (for ) * Kit-Interface Panel ST (Membrane Switch, Membrane Panel, Gasket) 15# Plate-Circuit Breaker NOTE 1 16# DELETED [17] Cable-Jumper [18] Harness-Main Connector Assy Connector Assembly Speed Controller 70a 24v (A2) Circuit Breaker, 30 Amp (CB1) Boot-Battery Post A 3 Cable,Battery Fuse, 150 Amp (F1) Electrical Mount Tie, Cable Circuit Breaker, 10 Amp (CB2) Washer 7/16 Od X.036 Thk a 1 Relay, 40a (K1) a 1 Contactor, Brush 24v (K2) a 2 Screw, M5 X 0.8 X 10mm P.H a 2 Screw, Hex Thd To Hd M5x a 2 Screw, 8-32 X 1 1/4 P.H Washer a 2 Washer, 1/4 Flat S.S Bracket-PCB Mount Wsh-Flt SAE 8 [ ] Kit-EMC Filter-Cyl (Canada Only) [ ] Nut Hex M4 [ ] Scr Pan Phil M3.9 X 12.0 [ ] Assy-Emc Filter Brush Motor [ ] Assy-Emc Filter Transaxle [ ] Bracket-Filter [ ] Bracket-Filter Mount [ ]# Scr-Pan Phil 1/4-20 X.62 [ ] Nut, Hex Nyl Loc Ss 1/4-20 [ ] Kit-EMC Filter-Disc (Canada Only) [ ] Scr Hex Thd/Hd M6-1.0 X 16mm [ ] Nut Hex M4 [ ] Scr Pan Phil M3.9 X 12.0 [ ] Nut Hex Nyl Loc M6 X 1.00 [ ] Assy-Emc Filter Brush Motor [ ] Assy-Emc Filter Transaxle [ ] Filter Mount Weldment [ ] Bracket-Filter Mount [ ]# Scr-Pan Phil 1/4-20 X.62 [ ] Nut, Hex Nyl Loc Ss 1/4-20 [ ] = Not Shown * = Optional, Not Included # = Revised or new since last update #NOTE 1: Circuit Breaker Plate is obsolete and has been replaced by

16 16 RECOVERY SYSTEM K

17 10-7 RECOVERY SYSTEM K1 1 2 Cage, Float Wsh, Flt Std # Scr, Pan Phil M6-1 X 20mm Wsh, Flt Ss 6mm Scr-Flt Phil Ss M4-0.7 X 8mm Recovery Tank (SC750 models) Recovery Tank (SC800 models) Recovery Lid (SC750 models) Recovery Lid (SC800 models) Utility Caddy Vac Motor-24 Vdc (M5) *# Carbon Brush Set of 2 (for ) Retainer Plate Retainer Plate Gasket-Recovery Lid Bushing K Ball, Float Clamp- Hose Sae # Tie, Cable Tie, Cable Clamp-P Vacuum Motor Cover Suction Hose Insulation Tube Panel, Acoustic Insulation Stop Tank Cable Vacuum Cover Plate Tank Cover Plate Filter Cap - Tank Gasket Vacuum Motor Drain Hose-Recovery Debris Tray Debris Tray Cover Gasket, Vacuum Motor Support Float System Gasket Float Support Nut Drivin 6x6 Ss a 3 Screw, M4-.7x a 2 Screw, M6 X a 2 Screw M5-.8x12 Bt a 3 Screw, 6mm X 1.00 X 35mm Lg Hex a 3 Washer, 1/4 Flat S.S Spacer K Kit-Float Ball Cage * = Optional, Not Included # = Revised or new since last update

18 18 SCRUB SYSTEM-DISK

19 10-7 SCRUB SYSTEM-DISK Nut, Hex Nyl Loc-Thin SS 5/ Wsh, Flt Sae SS 1/ Wsh, Flt Sae SS 5/ Scr,Pan Phil Metric Scr, Hex SS M6-1 X 16mm Scr- Hex SS 5/16-18 X Scr, Soc Hd 5/16-18 X 1.25 Zinc Plated Nut-Hex Nyl Loc Thin M Wsh, Flt.392x1.00x Brush Plate Assy CCW (36-43) Brush Plate Assy CW (36-43) Button Plug Brush Plate Weldt 26D (26 models) [ ] Brush Plate Weldt 28D (28 models) [ ] Brush Plate Weldt 34D (34 models) Linkage Bracket Motor Gearbox Assy (M3 / M4) *# Carbon Brush (for ) Brush Skirt Assy-26D Left (26 models) Brush Skirt Assy-28D Left (28 models) Brush Skirt Assy-34D Left (34 models) Brush Skirt Assy-26D Right (26 models) Brush Skirt Assy-28D Right (28 models) Brush Skirt Assy-34D Right (34 models) [ ] Kit-Bristle Skirt 26 (26 models / Includes two skirts and mounting hardware) [ ] Kit-Bristle Skirt 28 (28 models / Includes two skirts and mounting hardware) [ ] Kit-Bristle Skirt 34 (34 models / Includes two skirts and mounting hardware) A 2 Hose-Solution 6.00 (26 models) Hose, PVC Clear 7.00 (28 models) 30453A 2 Hose-Clear Vinyl (34 models) Insulator, Terminal (28 & 34 models) Wheel, 4.00 OD Bushing, Nylon Clamp, Hose Clamp, Manifold a 1 Hose, Solution a 1 Splitter, Solution a 2 Clamp, Hose a 1 Clamp, Hose a 1 Keeper, Latch a 1 Latch, Southco a 2 Screw, M6-1 X a 1 Tab, Latch, Brush a 3 Bolt, M X 20, Hex a 3 Nut, M Nylock S.S a 4 Nut, M Nylock S.S a 2 Screw, M6-1 X 40mm Ph Gimbal Assembly Plate, Stop Wsh, Flt.266 x.906 x Scr, Pan Phil Plastite x Spring Retainer Spring, Brush Holder Brush Plate [ ] = Not Shown * = Optional, Not Included # = Revised or new since last update

20 20 SCRUB SYSTEM-CYLINDRICAL ROTATION

21 10-7 SCRUB SYSTEM-CYLINDRICAL Hose Scr, Soc Set Loc 5/16-18 X Scr,Hex Hd Loc 1/4-20x Pin, Cotter Hair Nut-Hex Nyl Loc M Nut-Hex Nyl Loc M Nut, Hex Nyl Loc Ss M Nut, Hex Nyl Loc Ss M Scr, Hex Ss M6-1 X 16mm Scr, Hex Ss M X 25mm Scr, Hex M6-1 X 95mm Scr, Pan Phil Thd Form 1/4-20 X Pin-Clevis.375 X Wsh, Flt.344 X.938 X Motor-24 Vdc 3/4hp (M3 / M4) *# Brush Cap Assy (for ) Brush Housing Weldment-28 (28 models) Brush Housing Weldment-32 (32 models) Strap-Motor Sheave-Poly-V Linkage Bracket Hopper Weld t-28 (28 models) Hopper Weld t-32 (32 models) Clamp- Hose Sae # Tee,Barb Belt, Auto Tension Manifold, Pvc 28 (28 models) Manifold, Pvc 32 (32 models) Drive End Assy Cover, Belt Idler End Assy [ ]# Knob (for ) Plate, Motor Spacer Blade Strap Bushing Wheel Insulator, Terminal Scr Pan Phil 1/4-20 X a 1 Clamp P 5/8 Steel Wsh Int Shprf 1/ a 1 Washer, 1/4 Flat S.S A 1 Hose-Solution Barb-Coupler 1/2 x 3/4 [ ] = Not Shown * = Optional, Not Included # = Revised or new since last update

22 22 SOLUTION SYSTEM L Clamp, Hose D Wsh, Flt SAE SS 1/2 (SC750, SC800) Solution Tank (SC750, SC750 ST models) Solution Tank (SC800, SC800 ST models) Tube-Pressure Sensing (SC750, SC800) Drain Hose (SC750, SC750 ST models) Drain Hose (SC800, SC800 ST models) Gasket,.25 X Tie, Cable Hose (SC750, SC800) Gasket Ball Valve Adaptor-Barb Male (SC750, SC800) Screw M5-.8 X 16mm Pn St Ph Cap-Raw With Tether Connector, Straight a 2 Bushing a 4 Tab, 1/4 Screw a 4 Screw, M6 X 1.00 X 10mm Pan Head Plug, 1/2 Hex Pipe (SC750 ST, SC800 ST) Plug-Hex Pipe (SC800, SC800 ST models) Clamp-Hose SAE 12

23 10-7 SQUEEGEE ASSY Squeegee Assy (26 & 28 models) Squeegee Assy (32 & 34 models) Blade Kit-Squeegee Gum (26 & 28 models) NOTE Blade Kit-Squeegee Gum (32 & 34 models) NOTE a 1 Strap-Squeegee Front (26 & 28 models) 60546A 1 Strap-Squeegee Front (32 & 34 models) a 1 Scr, Soc Setscrew, Set M X 30mm Scr- Hex Ss 5/16-18 X Wsh, Flt Sae Ss 5/ Button Plug Wheel Strap-Squeegee Rear (26 & 28 models) Strap-Squeegee Rear (32 & 34 models) Bushing, Nylon Wheel 90x20 With Bushing Rear Latch Strap Nut Thumb, Squeegee Fixing a 2 Screw, Hex Thd To Hd M6-1x55 16 L Latch, Squeegee Screw, 5/16-18 X 1.25 Hex Hd a 1 Knob, M8 X a 2 Shim, Squeegee Knob a 2 Nut, M Nyloc S.S Scr-Pan Phil SS 6-32 x a 2 Washer, 1/4 Flat S.S Nut-Hex Nyl Loc SS 6-32 Squeegee Blade Kits for Blade Kit-Squeegee Gum NOTE 1 * Blade Kit-Squeegee Red Gum NOTE 1 * Blade Kit-Squeegee PU NOTE 1 Squeegee Blade Kits for Blade Kit-Squeegee Gum NOTE 1 * Blade Kit-Squeegee Red Gum NOTE 1 * Blade Kit-Squeegee PU NOTE 1 * = Optional, Not Included NOTE 1: All squeegee blade kits include both front and rear squeegee blades.

24 24 SQUEEGEE SYSTEM

25 10-7 SQUEEGEE SYSTEM a 1 Plate Squeegee Support 2 L Pivot Support 3 L Spacer Squeegee Assy (26 & 28 models / Includes Gum Rubber Blades) Squeegee Assy (32 & 34 models / Includes Gum Rubber Blades) Spacer 6.5x10x Joint, Ball M Squeegee Support Squeegee Spring Support Shoulder Screw M10 X Shaft Push Squeegee Spring Push Squeegee Spring Cable, Squeegee Lifting a 1 Nut, M Nylock Pin, Cotter-.094 X Screw M6-1 X 25mm Hex Washer, 5/16 Flat a 2 Spacer a 1 Knob, Lift a 1 Knob, M8 X a 1 Lever, Squeegee Lift a 1 Nut M Hex a 1 Nut, M6 Hex a 1 Screw, M6 X a 4 Nut, M Nylock S.S a 1 Nut, M Nylock S.S a 2 Washer Flat a 1 Screw, 3/8-16 X 5/ a 2 Washer Control Shaft a 2 Washer Flat1.22 X.64 X.10 Nylon a 1 Nut, M6-1 Acorn Self-Adhesive Sideburns

26 26 LADDER DIAGRAM-SC750, SC F1 BAT CB1 A3 CB2 S3 A1 A2 M6 R2 R1 M1 K3 R3 A5 K1 K2 L1 K1 M5 A4 K3 K2 M3 M4 M3 M4

27 10-7 LADDER DIAGRAM-SC750, SC A1# Kit AXP Control Board A Speed Controller 70a 24v A Battery Charger 24v 25a (Optional) A Hour Meter (Optional) A Laser Module (Optional) BAT NA Battery-24VDC F Fuse, 150 Amp CB Circuit Breaker-30 Amp CB Circuit Breaker-10 Amp K A 1 Contactor-Vacuum K Contactor-Brush K A 1 Contactor-Brush Remove L Solenoid-Solution M A 1 Motor-Wheel Drive M A 1 Motor-Actuator M Motor-Left Brush (Disk) Motor-Left Brush (Cylindrical) M Motor-Righ Brush (Disk) Motor-Left Brush (Cylindrical) M Motor-Vacuum M Pump-Chemical (Optional) R Potentiometer, 5K Ohm, Throttle R Potentiometer-Speed Limit R3 NA 1 Part of Main Wiring Harness S0 NA 1 Part of M2 S1 NA 1 Part of M2 S2 NA 1 Part of M2 S Switch, Key # = Revised or new since last update

28 28 LADDER DIAGRAM-SC750 ST, SC800 ST F1 BAT CB1 A3 CB2 S3 A1 A2 S7 M2 S6 S8 S4 S9 R3 S2 S1 S0 R4 R2 S5 M1 K1 K2 L1 K1 M5 A4 K2 M3 M4 M3 M4

29 10-7 LADDER DIAGRAM-SC750 ST, SC800 ST A1# Kit ST Control Board A Speed Controller 70a 24v A Battery Charger 24v 25a (Optional) A Hour Meter (Optional) BAT NA Battery-24VDC F Fuse, 150 Amp CB Circuit Breaker-30 Amp CB Circuit Breaker-10 Amp K A 1 Contactor-Vacuum K A 1 Contactor-Brush L Solenoid-Solution M A 1 Motor-Wheel Drive M A 1 Motor-Actuator M Motor-Left Brush (Disk) Motor-Left Brush (Cylindrical) M Motor-Righ Brush (Disk) Motor-Left Brush (Cylindrical) M Motor-Vacuum R Potentiometer-Speed Limit R3 NA 1 Part of Main Wiring Harness R4 NA 1 Resistor-4.75K S0 NA 1 Part of M2 S1 NA 1 Part of M2 S2 NA 1 Part of M2 S Switch, Key S Switch-Traction S Switch-Traction S Switch-Reverse S Switch-Vacuum S Switch-Scrub S Switch-Solution # = Revised or new since last update

30 30 Ref. No. Qty Description Kits * Kit-Onboard Charger * Kit-VacuumWand With Tote Bag * Kit-Battery Watering * Kit-Hour Meter * Kit-Parking Brake * Kit-Laser (SC750, SC800 only) * Kit-Wet Floor Sign Holder * Kit-Mop Holder * Kit-Disk Deck Assy 26 * Kit-Disk Deck Assy 28 * Kit-Cylindrical Deck Assy 28 * Kit-Cylindrical Deck Assy 32 * Kit-Disk Deck Assy 34 OPTIONAL KITS AND ACCESSORIES NOTE: Replacement parts for the kits listed above can be found on each kit s associated instruction sheet. Squeegee Blade Kits for (See Squeegee Blade Selector Guide) Blade Kit-Squeegee Gum NOTE 1 * Blade Kit-Squeegee Red Gum NOTE 1 * Blade Kit-Squeegee PU NOTE 1 Squeegee Blade Kits for (See Squeegee Blade Selector Guide) Blade Kit-Squeegee Gum NOTE 1 * Blade Kit-Squeegee Red Gum NOTE 1 * Blade Kit-Squeegee PU NOTE 1 Accessories * Utility Caddy * Programmer With Cable * Indicator-Battery Level (1 per battery) * Literature pack Optional Batteries * Battery, 6v 235 A/H Wet TSBUS * Battery, 6v 305 A/H Wet TSBUS * Battery, 6v 312 A/H AGM TSBUS Optional Battery Chargers * Charger, 24vdc Auto 20 Amp 120vac/60hz TSBUS * Charger, 24vdc Auto 25 Amp 120vac/60hz TSBUS * Charger, 24vdc Auto 20 Amp 230vac/50hz TSBUS Disk Scrub Brushes (See Brush Selector Guide) * Short Trim Pad Holder * Pad Retainer for * ProLite * Prolene * Union Mix * AgLite Grit 500 * MidGrit 240 * MidLite Grit 180 * Dyna Grit 80 * Magna Grit Disk Scrub Brushes (See Brush Selector Guide) * Short Trim Pad Holder * Pad Retainer for * ProLite * Prolene * Union Mix * AgLite Grit 500 * MidGrit 240 * MidLite Grit 180 * Dyna Grit 80 * Magna Grit Disk Scrub Brushes (See Brush Selector Guide) * Short Trim Pad Holder * Pad Retainer for * ProLite * Prolene * Union Mix * AgLite Grit 500 * MidGrit 240 * MidLite Grit 180 * Dyna Grit 80 * Magna Grit Cylindrical Scrub Brushes (See Brush Selector Guide) * Soft Nylon * Hard Nylon * Prolene * MidLite Grit 180 * Dyna Grit 80 * Magna Grit Cylindrical Scrub Brushes (See Brush Selector Guide) * Soft Nylon * Hard Nylon * Prolene * MidLite Grit 180 * Dyna Grit 80 * Magna Grit 46 * = Optional, Not Included NOTE 1: All squeegee blade kits include both front and rear squeegee blades.

31 10-7 BRUSH SELECTOR GUIDE - DISK 31 We provide brushes and pad holders that will give you the best possible performance between machine and floor. Following are descriptions of the materials and their applications. ProLite: Bristles are made from light-duty polypropylene for general scrubbing when you do not want to scratch or remove finish from the floor. Recommended for use in place of red pads. Prolene: Polypropylene material for medium-duty scrubbing on concrete, terrazzo and vinyl floor tile. Recommended for use in place of green or blue pads. Union Mix: Medium grade natural fibers for polishing finished floors with standard-speed equipment. Recommended for use in place of white pads. AgLite Grit 500: For light scrubbing when used wet; buffing or polishing when used dry on urethane coated, sealed concrete or other resilient hard surface floors. Recommended for use in place of red or white pads. MidGrit 240: For general purpose scrubbing when you need a lighter action for sealed or unsealed concrete, stone, terrazzo, quarry tile and other resilient hard floor surfaces. Recommended for use in place of green or blue pads. MidLite Grit 180: For general purpose scrubbing of sealed or unsealed concrete, stone, terrazzo, quarry tile and other resilient hard floor surfaces. Recommended for use in place of green or blue pads. Dyna Grit 80: Magna Grit 46: Short Trim Pad Holder: For aggresive, heavy-duty scrubbing or stripping of floors. Recommended for use in place of brown pads. For extreme heavy-duty scrubbing or stripping of floors. This brush has extra large diameter silicon carbide grit impregnated synthetic bristles. Recommended for use in place of black pads. Made with a structural foam block and center ring for correct pad centering. It has a shower feed design for getting solution to the floor. 26 BRUSHES Short Trim Pad Holder Pad Retainer for ProLite Prolene Union Mix AgLite Grit MidGrit MidLite Grit Dyna Grit Magna Grit BRUSHES Short Trim Pad Holder Pad Retainer for ProLite Prolene Union Mix AgLite Grit MidGrit MidLite Grit Dyna Grit Magna Grit BRUSHES Short Trim Pad Holder Pad Retainer for ProLite Prolene Union Mix AgLite Grit MidGrit MidLite Grit Dyna Grit Magna Grit 46 DISC BRUSH APPLICATION GUIDE (SUGGESTION ONLY) Union Application Grit Grit Grit Grit Grit Prolene Prolite Mix Stripping: Concrete X X Terrazzo X X Ceramic/Quarry tile X Vinyl tile X General Scrubbing: Concrete X X X X X Terrazzo X X X X Ceramic/Quarry tile X X X X Marble X X Vinyl tile X X X Raised-rubber tile X X Polishing: Raised Disc Tile X Marble X Vinyl tile X

32 32 BRUSH SELECTOR GUIDE - CYLINDRICAL 10-7 We provide brushes and pad holders that will give you the best possible performance between machine and floor. Following are descriptions of the materials and their applications. Soft Nylon: Stiff Nylon: Prolene: MidLite Grit 180: Dyna Grit 80: Magna Grit 46: Least aggressive brush available. Used on soft-finish floors where a more aggressive brush would leave scratch marks, or in applications requiring very light cleaning. Cleaning action similar to polypropylene. More durable and wear-resistant than polypropylene. Low cost, yet effective in cleaning many common floor surfaces. Least aggressive grit brush. Used for daily cleaning of hard-finished floors. Medium aggressive grit brush. Good all-around brush for medium to heavy buildup removal. Can also be used for general stripping operations. Most aggressive grit brush. Used primarily to clean heavy buildup on concrete floors in factories, or for heavy stripping of finish. 28 BRUSHES Soft Nylon Hard Nylon Prolene MidLite Grit Dyna Grit Magna Grit BRUSHES Soft Nylon Hard Nylon Prolene MidLite Grit Dyna Grit Magna Grit 46 CYLINDRICAL BRUSH APPLICATION GUIDE (SUGGESTION ONLY) Polypro- Stiff Soft Application Grit Grit Grit pylene Nylon Nylon Stripping: Concrete X X Terrazzo X X Ceramic/Quarry tile X Vinyl tile X General Scrubbing: Concrete X X X X X Terrazzo X X X X Ceramic/Quarry tile X X X X Marble X X X Vinyl tile X X X X Raised-rubber tile X X

33 10-7 Gum Rubber: SQUEEGEE BLADE SELECTOR GUIDE Provides superior wiping action on tile, terrazzo, and polished floors. 33 Red Gum Rubber: Polyurethane: Provides longest life on finished or unfinished concrete floors. Oil resistance provides superior life in applications with oily floors. SQUEEGEE BLADE APPLICATION GUIDE(SUGGESTION ONLY) Performance Traits Gum Rubber (Natural Rubber) Red Gum Rubber (Natural Rubber) Polyurethane/ Pentathane Resilience X X Tear Strength X X Abrasion Resistance X X X Wear Resistance X X Low Temp Flexibility X X High Temp Flexibility X X Ozone Resistance Chemical Resistance X Applications Oil Resistant Applications X General Purpose X X X Hot Water Applications X X Chemical Applications X Color Tan Red Translucent

34

35

36 A Nilfisk-Advance Brand st Avenue North Plymouth, MN Phone: Fax: Nilfi sk-advance, Inc.