bl 8 bm 1Robust, lightweight housing - hard coated aluminium alloy
|
|
- Ronald Malone
- 5 years ago
- Views:
Transcription
1 2-Jaw Parel Series GP4X pneumatic Product information: Overlapping, extremely robust T-Slot guide for maximum force and moment resistance Gripper jaws made of ground surfaced and hardened steel ensuring long lasting precision and a long lifespan Davailable with optional dust cover for use under extreme conditions High gripping force as a result of optimal direction change of driving force into gripping force Maintenance free up to million cycles high temperature resistant version (up to 5 C) available upon request Parel grippers with T-Slot guide made of steel Mx GP4 GP4X +3 % +3 % with guide Versions: e.g. order no.: -C N Long stroke S High force C For external gripping, self-locking, spring closing O For internal gripping, self-locking spring open bl 8 bm Design: Robust, lightweight housing - hard coated aluminium oy 2Mounting and positioning - mounting possible from several sides for versatile positioning 3Energy supply - available on several sides GP4X 4Overlapping guide - for maximum forces and moments capacity 5Integrated slot - mounting and positioning of magnetic fi eld sensors 6Wedge hook mechanism - syncronized movement of the gripper jaws 7Gripping force safety device - spring integrated into cylinder as energy storage 8Position sensing - permanent magnet for direct monitoring of piston setting 9Integrated adjustable switch cam - for direct position sensing of the gripper jaw blmounting block - mounting for inductive proximity switch () 26 Data, Drawings, 3-D Models, Operating Instructions
2 pneumatic 2-Jaw Parel Series GP4X Instation size: GP43X B H * T GP43-C GP43C-C GP43O-C GP43C-C GP43O-C GP43-C Instation size: GP44X B H * T GP44-C GP44C-C GP44O-C GP44-C GP44C-C GP44O-C GP44C-C GP44O-C GP44-C GP44C-C GP44O-C GP44-C Instation size: B H * T N-C NC-C NO-C S-C SC-C SO-C SC-C SO-C S-C NC-C NO-C N-C Instation size: B H * T N-C NC-C NO-C S-C SC-C SO-C SC-C 5 SO-C S-C NC-C 7 NO-C N-C * Version with gripping force protection (NC,SC,NO,SO), ** All data measured at 6 bar 27
3 2-Jaw Parel Series GP4X pneumatic Instation size: B H * T N-C NC-C 99 - NO-C - 5 S-C SC-C SO-C [N] Gripping force as a function of gripper fi nger length SC-C SO-C S-C NC-C NO-C N-C Instation size: B H * T Stroke per jaw N-C NC-C NO-C S-C SC-C SO-C [N] Gripping force as a function of gripper fi nger length SC-C SO-C S-C NC-C NO-C N-C Instation size: B H * T Stroke per jaw N-C NC-C NO-C S-C SC-C SO-C SC-C 375 SO-C S-C NC-C 25 NO-C N-C Instation size: B H * T Stroke per jaw N-C NC-C NO-C S-C SC-C SO-C SC-C 6 SO-C S-C NC-C 4 NO-C N-C * Version with gripping force protection (NC,SC,NO,SO), ** All data measured at 6 bar
4 pneumatic 2-Jaw Parel Series GP4X Instation size: B H * T Stroke per jaw N-C NC-C NO-C S-C SC-C SO-C [N] Gripping force as a function of gripper fi nger length SC-C SO-C S-C NC-C NO-C N-C * Version with gripping force protection (NC,SC,NO,SO), ** All data measured at 6 bar 29
5 2-Jaw Parel Series GP4X pneumatic Recommended accessories: Universal jaw set Version: Aluminium GP43X GP44X Version: Steel GP43X GP44X UB43 UB44 UB46 UB48 UB4 UB42 UB46 UB42 UB43 UB43ST UB44ST UB46ST UB48ST UB4ST UB42ST UB46ST UB42ST UB43ST 2 Dust protection GP44X PR44-B PR46-B PR48-B PR4-B PR42-B PR46-B PR42-B PR43-B 3 Alternative proximity switch bracket KHA4-B-8 KHA42-B-8 KHA46-B-8 KHA42-B-8 KHA43-B-8 4 Plug-in connector Version: Angled / Cable 5 m / Socket M8 (female) KAW5 Straight-Version 5 m Cable / Socket M8 (female) KAG5 3
6 pneumatic 2-Jaw Parel Series GP4X 5 Magnetic field sensor 7 Inductive proximity switch Version: Angled / Cable 5 m MFS3KHC Version: Straight / Cable 5 m MFS24KHC MFS24KHC MFS24KHC MFS24KHC MFS24KHC MFS24KHC MFS24KHC Version: Angled / Cable.3 m / Connector M8 MFS3SKHC Version: Straight / Cable.3 m / Connector M8 MFS24SKHC MFS24SKHC MFS24SKHC MFS24SKHC MFS24SKHC MFS24SKHC MFS24SKHC Version: Cable 5 m GP43X NJ3-E2 GP44X NJ3-E2 Version: Cable.3 m / Connector M8 GP43X NJ3-E2SK GP44X NJ3-E2SK Version: Connector M8 6 Pneumatic fittings Supplementary accessories: Version: Angled GP43X GP44X Version: Straight GP43X GP44X WV/8X6 WV/8X6 WV/8X6 WV/4X8 WV/4X8 GV/8X6 GV/8X6 GV/8X6 GV/4X8 GV/4X8 Quick ventilation valve GP43X DEV4 GP44X DEV4 DEV4 DEV4 DEV6 DEV6 DEV6 DEV8 DEV8 Pressure safety valve DSV/8 Plug-in conversion connector Version: Straight / 3-pole / Connector M8 S8-G-3 Version: Straight / 3-pole / Connector M2 S2-G-3 3
1Mounting and positioning - mounting possible from several sides for versatile positioning. 2Permanent magnet - installed in the piston area
2-Jaw Parel Series GP8 pneumatic Product information: Sealed square guide Sealed with additional wiper High precision due to low play guide Optimum transfer of power to gripping force Positioning of the
More information2-JAW ANGULAR GRIPPERS INSTALLATION SIZE GPW5008
-JAW ANGULAR GRIPPERS INSTALLATION SIZE GPW008 Installation size GPW008 / -Jaw Angular Grippers / pneumatic / Grippers PRODUCT SPECIFICATIONS TECHNICAL DATA Gripping force diagram Forces and moments Displays
More informationDrive. Guide. Profile rail guide with ball circuit and wiper smooth torsion stiff. Intake flange. Adapter plate
Linear Rail Slides Highlights Drive Double acting pneumatic cylinder maximum drive force in extend and retract movement pressure force up to 1 N Guide Profile rail guide with ball circuit and wiper smooth
More informationSeparators. pneumatic
Separators pneumatic Table of contents separators VEG-B Order no. Stroke Force in Force in Page [mm] retract [N] extend [N] Product Information 6 VEG10-B 10 30 40 10 VEG14-B 20 65 80 12 VEG15-B 40 65
More informationGrippers for Specific Tasks: O-Ring Assembly Grippers Internal Grippers
Grippers for Specific Tasks: O-Ring Assembly Grippers Internal Grippers Highlights Drive three single-acting pneumatic cylinders every cylinder is driven via a 5/ way valve retraction via spring Guide
More informationAxis Modules pneumatic
Axis Modules pneumatic Axis Modules XY-Compensation Order no. Stroke XY-Ebene Handling weight Page ± [mm] recommended [kg] Product Information 6 XY70 3 6 10 XY100 5 12 12 XY160 8 30 14 XY220 10 150 16
More informationSwivel Unit. elektrical
Swivel Unit elektrical Table of contents Swivel Units elektrical Order No. Swivel angle Torque Page [ ] [Nm] Product Information 6 DEF60 min. 30 - max. 330 1,6 10 Order No. Swivel angle Torque max. Page
More informationTable of contents gripper electrical
Gripper electrical Table of contents gripper electrical Order no. Stroke per Gripping force Gripping force Page jaw [mm] in opening [N] in clothing [N] Product Information GEP1402 2 140 14 10 GEP1406C
More informationNOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove
NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationTable of contents rotary cylinders. Pneumatic Rotor. Step-Rotor
Rotary Cylinders Table of contents rotary cylinders Pneumatic Rotor Order no. Pivot angle Torque Pivot time Catalogue no.. [ ] [Nm] [s] Product Information PRN-Series 6 PRN1-90-B 90 0,15 0,10 8 PRN1-180-B
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationRobotics Accessories
Robotics Accessories Robotics Accessories Tool Changer Order no. Connection flange Handling weight recommended [kg] Page Product Information 6 WWR40F/WWR40L TK40 15 10 WWR50F/WWR50L TK50 15 12 WWR63F/WWR63L
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationGrippers Parallel grippers
-finger parallel grippers -finger parallel grippers Product notes > Gripper with high gripping force > Double-acting for inside/outside gripping and short duty cycles > Single-acting: normally open (NO),
More information-U- Type discontinued. -H- Note. Available up until Angle grippers HGW Key features. 2 Internet:
Key features At a glance Double-acting piston drive Self-centring Variable gripping action: External/internal gripping Versatility thanks to externally adaptable gripper fingers Wide range of options for
More informationLong stroke grippers HGPL
Sturdy Gripping forces of up to 754 N Reliable Space saving 2004/10 Subject to change Products 2004/2005 1 / 3 Key features At a glance Space saving and suitable for high forces Two parallel and opposing
More informationWIDE OPENING PARALLEL GRIPPER
News 2001 S E R I E S CGL Wide Opening Parallel Gripper Series CGL Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The wide opening parallel gripper mod. CGL is available in 5 different sizes and has
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationLVE - with large through-hole
LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable
More informationSSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH)
SSP / SSH chucks Technical features: Wedge system Quick and efficient chucking in stationary use Concentric gripping of round as well as angular parts Universal through use of different jaws Gripping force
More informationPneumatic High Temperature Clamps and Grippers
Cam Type Gripper for Tubes Cam type gripper for handling of hot formed tubes. page 14.4 New products 14.0 Notes high temperature clamps and grippers are designed for applications in high ambient temperatures
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationGripper A F , 2 5, 3 0, 4 0, 5 0, 6 3, 9 0, Wedge type Base jaw Kinetics Mounting and positioning Precise T-slot guide Body Drive
Gripper AF30-20,25,30,40,,63,90,125 Character Compact structure by wedge guide driving unit Location pin hole at an each mounting side Possible to use without the supply tube when you use back side support
More informationThree-point grippers DHDS
Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws High gripping forces with compact dimensions Gripper jaw centring options
More informationGWS. Application example. Tool Changing Gripper Change System. Handling weight up to 170 kg. Moment load M x up to 400 Nm
GWS Sizes 064.. 125 Handling weight up to 170 kg Moment load M x up to 400 Nm Moment load M y up to 400 Nm Moment load M z up to 600 Nm Application example Replacing and placing tools in a gripper changing
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationPort Rc(PT), G, NPT M5 M5 1/8" 1/8" 1/8" Stroke mm 2 ~ 6 2 ~ 8 2 ~ 10 2 ~ 13 2 ~ 16. Air Consumption cc/cycle
2GN Parallel gripper with 2 jaws Features Wedge type, 2-Jaw parallel gripper Improved stability with longer gripping point between jaw & plunger Improved function, sti ness and outer look Made with flexible
More informationParallel grippers HGP, with protective dust cap
Key features At a glance Double-acting piston drive With protective dust cap for use in dusty environments (protection class IP54) Self-centring Variable gripping action: External/internal gripping High
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationProduct Information. Gripper change system GWS
Product Information GWS GWS Flat. Robust. Strong. GWS gripper change system pneumatic gripper change system Field of application Fast conversion of production lines for other products; the use of various
More information-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationGRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
More informationRadial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationMGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
More informationParallel grippers DHPS
Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws Oval piston for high gripping forces High gripping forces with compact
More informationRadial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
More informationLOW PROFILE PNEUMATIC PARALLEL GRIPPER
LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both
More informationParallel grippers HGPL-B, heavy-duty with long stroke
Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More information-H- Note. Angle grippers HGWC Key features. 2 Internet:
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationParallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
More informationParallel grippers HGPC
Key features At a glance General The compact and low-cost parallel gripper consists of a two-part symmetrical housing. The piston moves traverse to the half-shell casing in an optimum housing design that
More informationLVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More informationStandard gripper Series GSP
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Standard gripper Series GSP Technical Data Products Series GSP-P
More informationINFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationParallel Grippers. Features. Operation. Contents. Mounting
Catalog 9-2/US Features Dowel Pin Holes Slip fit dowels located in gripper body and jaws. Body One piece hard coat anodized aluminum body with Teflon impregnation. Seals Self lubricating dynamic seals
More informationAngular Motion Gripper Product Overview
2. 1 Angular Motion Gripper Product Overview RUA Series Angular Gripper 2-Jaw Angular Gripper Spring Assist Pneumatic or Hydraulic Operation Preferred Market: l Global Page2.2 DCT/CT Series TM 18 Angular
More informationAGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
More informationAGE-XY. Application example. Compensation XY Compensation Units Light Loads. Workpiece weight 4 kg.. 10 kg. Sizes 050..
AGE-XY Sizes 050.. 080 Workpiece weight 4 kg.. 10 kg Compensation paths XY ± 2.5 mm.. ± 4 mm Rotation ± 12.. ± 16 Application example Insertion unit for assembling a pin in a bore, in an approximately
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More information45x90 Strut for mounting flexibility. Long life ceramic bearing
Grippers Extreme Force and Torque The concept was developed for applications that impart high acceleration to heavy objects or require extremely long, precisely positioned jaws. These applications put
More informationSizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper
Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm 59.7 8 kg Application example PZH-SF 350 3-Finger Centric Gripper Gamma Gantry Linear Module Gamma Gantry Linear Module
More informationIDEAL FOR STATIONARY USE
IDEAL FOR STATIONARY USE The stationary power clamping devices from RÖHM are predestined for stationary, centric clamping of round and angular workpieces on milling machines or machining centers or for
More information-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationRUA-112M. Description. Spring. Blank None. Spring Closed Spring Open RE RI Inductive Case Description
RUA Series Angular Grippers Features and Benefits How To Order Features: Robust, shielded, high force gripper Optional springs for part retention in case of air loss or increased grip-force Side or top
More informationOperating Instructions. Handling Components Grippers GPU / GPUI BA ENGLISH
Operating Instructions Handling Components Grippers GPU / GPUI BA-100008 ENGLISH Edition: 10/2005 Operating Instructions GPU / GPUI Change index Previous editions: Edition Note Reference number 10/2005
More informationMagnetic Sizes mm
CATALOGUE > Release 8.7 > Series CGB guided parallel grippers Series CGB guided parallel grippers Running out of stock Magnetic Sizes 6-20 - 25-32 mm»» Guided mechanism which allows high repeatability»»
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationKONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
More informationFeed separators HPVS
Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationProduct Information. Long-stroke gripper PHL 32
Product Information PHL 32 PHL Flexible. Precise. Powerful. PHL long-stroke gripper 2-finger parallel gripper with large jaw stroke for large parts and / or a broad range of parts Field of application
More informationParallel Gripper Series CGB
Parallel Gripper Series CGB Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The guided parallel gripper mod. CGB is available in 4 different sizes and is equipped with a guide mechanism that offers
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationPWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
More informationCompact cylinders ADN-S, AEN-S
Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece
More informationP1Z Series Guided Version
Rodless Pneumatic ylinder Magnetically oupled orrosion resistant Guide carriage and endcaps in anodized aluminium Load fixing by 4 tapped holes onto the guide carriage ylinder mounting End cap with mounting
More informationLAP4, LAP8. Pneumatic linear drive sizes 4 and 8
Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding
More informationProduct Information. Rotary gripping module with angular gripper RW
Product Information RW RW Flexible. Modular. Compact. Gripper Swivel Module RW Rotary gripper combination, consisting of a rotary module and a 2-finger angular gripper Field of application Gripping and
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationXRAY Grippers - Extreme Force and Torque. Patented Synchronous Technology - Extended Life
XRAY XRAY Grippers - Extreme Force and Torque The XRAY concept was developed for applications that impart high acceleration to heavy objects or require extremely long, precisely positioned jaws. These
More informationSlide units SPZ, twin piston
Key features Multi-axis and drive combinations The slide unit SPZ can be combined with different drives. An adapter kit is required for mounting between the two drives. DPZ-/SPZ axis Adapter kits www.festo.com
More informationHandling Products. Comprising an innovative range of Grippers, Rotary Tables and Slide Tables
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Comprising an innovative range of Grippers, Rotary Tables and Slide
More informationgrippers pneumatic precision parallel movement DPP DirectConnect Series
grippers pneumatic precision parallel movement DPP Directonnect Series DPP Series No Adaptor Plates Required! Shown smaller than actual size. D-1M-E--5 linear thruster slide. Precision Gripping Preloaded
More informationPARALLEL PNEUMATIC HEAVY DUTY GRIPPER
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system
More informationPWG. Application example. Pneumatic 2-Finger Angular Grippers Universal Angular Grippers. Sizes Gripping moment 6 Nm..
PWG Sizes 65.. 230 Weight 0.33 kg.. 16.3 kg Gripping moment 6 Nm.. 934 Nm Opening angle per finger 20 Workpiece weight 1.1 kg.. 43 kg Application example Rotary feed unit for shafts PWG 130-B 2-Finger
More informationOil operated actuating cylinders without through-hole OVS,
OV Oil operated actuating without through-hole TEMPOONI stroke control measuring via magnetostrictivesensors measuring accuracy < 0,1 mm safe and consistent settings no wear, no maintenance no pre-settings
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationLVE - with integrated cylinder
LVE - with integrated cylinder Technical features: Wedge system with integrated clamping cylinder Large through-hole Scope of delivery: Chuck and jaw mounting screws, T-nuts (without top jaws) Unobstructed
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationXRAY S Parallel Opening/Closing Type Gripper 2 Finger 2200N
XRAY S 2200 2 Finger 2200N Handles big jobs with tremendous torque and force capability. Long jaws are no problem with the incorporated linear bearing rail. Sealed for years of trouble free use in tough
More informationNEW PRODUCTS MOULD MAKING II / E 3330 and E 3360 Compact slide units. Order now from our online shop!
NEW PRODUCTS MOULD MAKING II / 2016 Order now from our online shop! www.meusburger.com E 3330 and E 3360 Compact slide units High-precision and ready-to-use compact slide units with extremely slim design
More informationProduct Information. Gripper for small components RH 9010
Product Information RH 9010 RH cost-effective. Easy. Economical. RH gripper for small components The RH series is a cost-efficient gripping system, which is particularly suitable for simple cases of application.
More informationAngular and Parallel Grippers
CAP0551_Grippers_R2.qxp:OEM_TA 2/8/17 2:16 PM Page ii Angular and Parallel Grippers Table of Contents: Grippers Angular Grippers, Parallel Grippers and Options & Accessories Angular Grippers Introduction...
More informationPOWER CHUCKS CYLINDERS / STEADY RESTS
POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive
More informationLateral parallel hand Double acting. Operational stroke length: 20, 30, 40mm. 980m/s2
FH0 G G B H2 LB2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm
More informationNew Products 10/2018. New EOAT Components
New Products 10/2018 New OT omponents Tubular Remarks The brochure has been created with the most possible diligence. ll details are based on experiential determined values, accurate calculations, and
More informationModular. Precise. Robust. AGE-S-XYZ Compensation Unit
AGE-S Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
More informationPowerful, durable and quick to mount. Magnetic and cylinder sensors from ifm electronic.
Powerful, durable and quick to mount. Magnetic and cylinder sensors from ifm electronic. Magnetic sensors, cylinder sensors www.ifm.com/gb/cylindersensors fluid sensors and diagnostic systems position
More informationPrecise. Compact. Reliable. MPZ Small Components Gripper
MPZ Precise. Compact. Reliable. MPZ Small Components Gripper Small 3-finger centric gripper with base jaws guided on T-slots Field of Application F or universal use in clean to slightly dirty working environments,
More informationNo.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationLinear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
More information