TECHNICAL GUIDE LISTED SPLIT-SYSTEM HEAT PUMPS 13 SEER R-410A MODELS: THGD30 THRU 60 (2.5 THRU 5 NOMINAL TONS - 3 PHASE)

Transcription

1 TECHNICAL GUIDE SPLIT-SYSTEM HEAT PUMPS 13 SEER R-410A MODELS: THGD30 THRU 60 (2.5 THRU 5 NOMINAL TONS - 3 PHASE) LISTED ISO 9001 Certified Quality Management System Due to continuous product improvement, specifications are subject to change without notice. Visit us on the web at Additional rating information can be found at UTG-B-0309 DESCRIPTION The heat pump condensing unit is the outdoor part of a versatile system of heating and air conditioning. It is designed to be custom-matched with one of UPG s complete line of evaporator sections, with each serving a specific function. Matching Air Handlers are available for upflow, downflow, or horizontal applications to provide a complete system. Electric Heaters are available, if required. Add-on coils are available for use with upflow, downflow, or horizontal furnaces and air handlers. WARRANTY 1-year limited parts warranty. 5-year limited compressor warranty. FEATURES QUALITY CONDENSER COILS - The coil is constructed of copper tubing and enhanced aluminum fins for increased efficiency and corrosion protection. PROTECTED COMPRESSOR - The compressor is internally protected against high pressure, temperature, and externally by a factory installed high pressure switch. This is accomplished by the simultaneous operation of high pressure relief valve and a temperature sensor which protects the compressor if undesirable operating conditions occur. A liquid line filter-drier further protects the compressor. DURABLE FINISH - The cabinet is made of pre-painted steel. The pre-treated galvanized steel provides a better paint to steel bond, which resists corrosion and rust creep. Special primer formulas and matted-textured finish insure less fading when exposed to sunlight. LOWER INSTALLED COST - Installation time and costs are reduced by easy power and control wiring connections. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. TOP DISCHARGE - The warm air from the top mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. LOW OPERATING SOUND LEVEL - The upward air flow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. LOW MAINTENANCE - Long life permanently lubricated motor-bearings need no annual servicing. EASY SERVICE ACCESS - Fully exposed refrigerant connections, and a single panel covering the electrical controls make for easy servicing of the unit. SECURED SERVICE VALVES - Secured re-usable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging. U.L. and C.U.L. listed - approved for outdoor application. Agency Listed - U.L. and C.U.L. listed - approved for outdoor application. The unit is certified in accordance with the Unitary Small Equipment certification program, which is based on ARI Standard 210/240. FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

2 Physical and Electrical Data - 3 Phase MODEL THGD30 S43S1 THGD36 S43S1 THGD42 S43S1 THGD48 S43S1 THGD60 S43S1 THGD30 S44S1 THGD36 S44S1 THGD42 S44S1 THGD48 S44S1 Unit Supply Voltage V, 3 60Hz 460V, 3 60Hz Normal Voltage Range to to 532 Minimum Circuit Ampacity Max. Overcurrent Device Amps THGD60 S44S1 Min. Overcurrent Device Amps Compressor Type Recip Recip Recip Scroll Scroll Recip Recip Recip Scroll Scroll Compressor Amps Rated Load Locked Rotor Crankcase Heater Yes Yes No No No Yes Yes No No No Fan Motor Amps Rated Load Fan Diameter Inches Rated HP 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Fan Motor Nominal RPM Nominal CFM Face Area Sq. Ft Coil Rows Deep Fin / Inches Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Vapor Line Set OD (Field Installed) 3/4 3/4 7/8 7/8 7/8 3/4 3/4 7/8 7/8 7/8 Unit Charge (Lbs. - Oz.) Charge Per Foot, Oz Operating Weight Lbs Rated in accordance with ARI Standard 110, utilization range A. 2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection. 3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection. 4. The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value. If line exceeds 25 feet, you may refer to publications software for proper line sizing. A C All dimensions are in inches. They are subject to change without notice. Certified dimensions will be provided upon request. Unit Model Dimensions (Inches) Refrigerant Connection Service Valve Size A 1 B C Liquid Vapor /8 7/ Including Fan Guard. B 2 Johnson Controls Unitary Products

3 System Charge for Various Matched Systems Outdoor Unit THGD30S4(3,4)S1 THGD36S4(3,4)S1 THGD42S4(3,4)S1 THGD48S4(3,4)S1 THGD60S4(3,4)S1 Required Orifice or TXV 1,2 1TVM04G1 1TVM04H1 1TVM04H1 1TVM04J1 1TVM04K1 Factory Charge, lbs-oz Indoor Coil 3,4 Additional Charge, Oz AHP18 AHP30 AHP AHP/SHP AHP/SHP60 0 AHX30 0 AHX AHX AHX AHX F6FP030 F6FP F6FP F6FP F6FP FC/MC/PC/UC18AB FC/MC/PC/UC24AB FC/MC/PC30AB FC/MC/PC32A 0 FC/MC/PC35BC 0 FC/MC/PC37A 0 0 FC/MC/PC43BC 0 0 FC/MC/PC/UC48CD FC/MC/PC/UC60CD 0 0 FC/MC62D 12 0 HC18A HC30A HC36B 0 HC HC HD24 HD36 HD HD FOOTNOTES: 1. For applications requiring a TXV use 1TVM series kit. 2. Approved orifice shipped with outdoor unit. 3. Systems matched with furnace or air handlers not equipped with blower-off delays may require blower Time Delay Kit 2FD PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications. PROCEDURES: 1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and 15 feet of interconnecting line tubing. 2. Verify the TXV and additional charge required for specific evaporator coil in the system using the above table. 3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table. 4. For TXV matches requiring additional charge, the refrigerant needs to be weighed in for specific coil match and lineset length. 5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for evaporator + adder for line set. Johnson Controls Unitary Products 3

4 COOLING CAPACITY - With Air Handler Coils UNIT MODEL AIR HANDLER MODEL W COIL MODEL 1 RATED CFM 13 SEER HP WITH MA NET MBH COOLING 1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. = Not applicable. 4 Johnson Controls Unitary Products TOTAL THGD30S4(3,4)S1 MA12B 17 FC/MC/PC35B MA12B 17 FC/MC/PC43B THGD36S4(3,4)S1 MA12B 17 FC/MC/PC43B MA14D 24 FC/MC/PC48D MA14D 24 FC/MC/PC48D THGD42S4(3,4)S1 MA16C 21 FC/MC/PC48C MA14D 24 FC/MC/PC60D MA16C 21 FC/MC/PC60C MA16C 21 FC/MC/PC48C MA20D 24 FC/MC/PC48D THGD48S4(3,4)S1 MA16C 21 FC/MC/PC60C MA20D 24 FC/MC/PC60D MA20D 24 MC62D THGD60S4(3,4)S1 MA20D 24 MC62D SEER HP WITH AHP / SHP / F*FP THGD30S4(3,4)S1 AHP F4FP THGD36S4(3,4)S1 AHP F4FP AHP/SHP THGD42S4(3,4)S1 F4FP F5FP AHP/SHP THGD48S4(3,4)S1 F5FP F5FP SEER HP WITH AHX / F*FP AHX THGD30S43S1 AHX F6FP AHX AHX THGD36S43S1 AHX F6FP F6FP F6FP AHX AHX THGD42S43S1 AHX F6FP F6FP F6FP AHX THGD48S43S1 AHX F6FP F6FP THGD60S43S1 AHX F6FP Rated in accordance with DOE test procedures (Federal Register and ) and ARI Standards 210. Cooling MBH based on 8 F entering air temperature, 50% RH, and rated air flow. EER (Energy Efficiency Ratio) is the total cooling output in BTU s at 95 F outdoor ambient divided by the total electric power in watt-hours at those conditions. SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU s during a normal annual usage period for cooling divided by the total electric power input in watt-hours during the same period. SENS. SEER EER

5 COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils FURNACE** COIL UNIT MODEL W MODEL CFM RANGE (Min.-max.) RATED CFM TOTAL COOLING NET MBH SENS. SEER FC/MC/PC ,21 FC/MC/PC FC/MC/PC THGD30S4(3,4)S ,21 FC/MC/PC HC HC ,24 HD FC/MC/PC ,21 FC/MC/PC THGD36S4(3,4)S ,24 FC/MC/PC HC ,24 HD ,24 FC/MC/PC ,24 FC/MC/PC THGD42S4(3,4)S HC HC ,24 HD ,24 FC/MC/PC ,24 FC/MC/PC THGD48S4(3,4)S HC ,24 HD ,24 MC THGD60S4(3,4)S ,24 MC Requires a 2FD Blower Time Delay unless a standard furnace is equipped with one. ** Refer to Quick Selection Chart for specific furnace match-up. EER Johnson Controls Unitary Products 5

6 COOLING CAPACITY - With High Efficiency Motor Furnaces MODELS THGD30S43S1 THGD36S43S1 THGD42S43S1 THGD48S43S1 THGD60S43S1 FURNACE MODEL COIL MODEL 1 W RATED CFM TOTAL 13 SEER HP WITH VARIABLE SPEED FURNACES 2 Net MBH COOLING SENS. SEER T*(8,L)X*A12 FC/MC/PC37A T*9X*B12 FC/MC/PC43B T*(8,L)X*B12 FC/MC/PC43B T*9X*B12 FC/MC/PC43B T*(8,L)X*B12 FC/MC/PC43B T*(8,L)X*C16 FC/MC/PC43C T*9X*C16 FC/MC/PC43C T*(8,L)X*C20 FC/MC/PC43C T*9X*C20 FC/MC/PC43C T*(8,L)X*C16 FC/MC/PC48C T*9X*C16 FC/MC/PC48C T*(8,L)X*C20 FC/MC/PC48C T*9X*C20 FC/MC/PC48C T*9X*D20 FC/MC/PC48D T*(8,L)X*C16 UC48C T*9X*C16 UC48C T*(8,L)X*C20 UC48C T*9X*C20 UC48C T*9X*D20 UC48D T*(8,L)X*C16 FC/PC60C T*9X*C16 FC/PC60C T*(8,L)X*C20 FC/MC/PC60D T*9X*C20 FC/PC60C T*9X*D20 FC/MC/PC60D T*9X*D20 FC/MC62D T*(8,L)X*C16 UC60C T*(8,L)X*C20 UC60D T*9X*C16 UC60C T*9X*C20 UC60C T*9X*D20 UC60D T*(8,L)X*C20 FC/MC62D T*9X*D20 FC/MC62D MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. 2. Variable speed furnaces have B.O.D (Blower on Delay) standard. EER 6 Johnson Controls Unitary Products

7 HEATING PERFORMANCE - With Air Handler UNIT MODEL* AIR HANDLER COIL 1 MODEL UTG-B-0309 ARI HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 13 SEER HP WITH MA THGD30S4(3,4)S1 MA12B FC/MC/PC35B MA12B FC/MC/PC43B MA12B FC/MC/PC43B THGD36S4(3,4)S1 MA14D FC/MC/PC48D MA16C FC/MC43C MA16C FC/MC48C MA14D FC/MC/PC48D THGD42S4(3,4)S1 MA16C FC/MC/PC48C MA14D FC/MC/PC60D MA16C FC/MC/PC60C MA16C FC/MC/PC48C MA20D FC/MC/PC48D THGD48S4(3,4)S1 MA16C FC/MC/PC60C MA20D FC/MC/PC60D MA20D MC62D THGD60S4(3,4)S1 MA20D MC62D SEER HP WITH AHP / SHP / F*FP THGD30S4(3,4)S1 AHP F4FP THGD36S4(3,4)S1 AHP F4FP AHP/SHP THGD42S4(3,4)S1 F4FP F5FP AHP/SHP THGD48S4(3,4)S1 F5FP F5FP SEER HP WITH AHX / F*FP AHX THGD30S43S1 AHX F6FP AHX AHX THGD36S43S1 AHX F6FP F6FP F6FP AHX AHX THGD42S43S1 AHX F6FP F6FP F6FP AHX THGD48S43S1 AHX F6FP F6FP THGD60S43S1 AHX F6FP Rated CFM same as for cooling. 2. Heating MBH based on ARI standards of 70 DB entering indoor air, 72% RH outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. CP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. Johnson Controls Unitary Products 7

8 HEATING PERFORMANCE - Upflow, Downflow, and Horizontal Furnaces and Coils UNIT COIL 1 ARI HEATING 2 MODEL* 47 F 17 F HSPF MODEL MBH COP KW MBH COP KW STD FC/MC/PC FC/MC/PC FC/MC/PC THGD30S4(3,4)S1 FC/MC/PC HC HC HD FC/MC/PC FC/MC/PC THGD36S4(3,4)S1 FC/MC/PC HC HD FC/MC/PC FC/MC/PC THGD42S4(3,4)S1 HC HC HD FC/MC/PC FC/MC/PC THGD48S4(3,4)S1 HC HD MC62 48 c THGD60S4(3,4)S1 MC Rated CFM same as for cooling. 2. Heating MBH based on ARI standards of 70 DB entering indoor air, 72% RH outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. CP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. 8 Johnson Controls Unitary Products

9 HEATING CAPACITY - With High Efficiency Motor Furnaces UNIT MODELS THGD30S4(3,4)S1 THGD36S4(3,4)S1 THGD42S4(3,4)S1 THGD48S4(3,4)S1 THGD60S4(3,4)S1 FURNACE COIL 1 ARI HEATING 2 MODEL 47 F 17 F HSPF MODEL MBH COP KW MBH COP KW STD 13 SEER HP WITH VARIABLE SPEED FURNACES 3 T*(8,L)X*A12 FC/MC/PC37A T*9X*B12 FC/MC/PC43B T*(8,L)X*B12 FC/MC/PC43B T*9X*B12 FC/MC/PC43B T*(8,L)X*B12 FC/MC/PC43B T*(8,L)X*C16 FC/MC/PC43C T*9X*C16 FC/MC/PC43C T*(8,L)X*C20 FC/MC/PC43C T*9X*C20 FC/MC/PC43C T*(8,L)X*C16 FC/MC/PC48C T*9X*C16 FC/MC/PC48C T*(8,L)X*C20 FC/MC/PC48C T*9X*C20 FC/MC/PC48C T*9X*D20 FC/MC/PC48D T*(8,L)X*C16 UC48C T*9X*C16 UC48C T*(8,L)X*C20 UC48C T*9X*C20 UC48C T*9X*D20 UC48D T*(8,L)X*C16 FC/PC60C T*9X*C16 FC/PC60C T*(8,L)X*C20 FC/MC/PC60D T*9X*C20 FC/PC60C T*9X*D20 FC/MC/PC60D T*9X*D20 FC/MC62D T*(8,L)X*C16 UC60C T*(8,L)X*C20 UC60D T*9X*C16 UC60C T*9X*C20 UC60C T*9X*D20 UC60D T*(8,L)X*C20 FC/MC62D T*9X*D20 FC/MC62D Rated CFM same as for cooling. 2. Heating MBH based on ARI standards of 70 DB entering indoor air, 72% RH outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. 3. Variable speed furnaces have B.O.D (Blower on Delay) standard. CP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. Johnson Controls Unitary Products 9

10 ACCESSORIES Refer to Price Manual for specific model numbers. Start Assist Kit (2SA067*) - May be required on 42, 48, 60 models. Models 18, 24, 30, 36 have been factory installed. Blower Time Delay - Available to increase efficiency when installed. Installs on indoor section and maintains blower for approximately one minute after cooling thermostat has been satisfied. Hard Start Kits - Provides required starting torque for use with Thermal Expansion Valve Kit. Low Temperature Cutout (2LT ) - Prevents heat pump operation below -1 F ambient temperature. Compressor Blanket - Designed to further reduce the normal operating sound. Add-on Fossil Fuel Control - Interface controls for use with gas, oil furnaces and the heat pump system are available. Thermal Expansion Valve Kit - 1TVM900 Series TXV kit used to improve system performance. Outdoor Thermostat (2TD ) - Provides additional staging of supplemental electric heat. Room Thermostats - A wide selection of matching thermostats is available to provide features required for any installation. 2H/1C, manual changeover electronic non-programmable thermostat. 3H/2C, non-programmable digital thermostat. 3H/2C, auto/manual changeover, electronic programmable, 7- day, hardwire thermostat. * For the most current accessory information, refer to the price book or consult factory. SOUND POWER RATINGS UNIT MODEL (dba)* Cooling Heating Cooling Heating * Rated in accordance with ARI Standards. TYPICAL INSTALLATION 48 OVERHEAD CLEARANCE MINIMUM 24 SERVICE ACCESS CLEARANCE ON ONE SIDE WEATHERPROOF DISCONNECT SWITCH THERMOSTAT NEC CLASS 1 WIRING 10 CLEARANCE AROUND PERIMETER TO FURNACE OR AIR HANDLER TERMINAL BLOCK NEC CLASS 2 WIRING TO INDOOR COIL NOTE: ALL OUTDOOR WIRING MUST BE WEATHERPROOF. CONTROL ACCESS PANEL SEAL OPENING(S) WITH PERMAGUM OR EQUIVALENT TYPICAL FIELD WIRING ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES THERMOSTAT INDOOR UNIT OUTDOOR UNIT LOW VOLTAGE TERMINAL BLOCK 3,4 DEFROST IN AIR HANDLER WITH ELECTRIC HEAT CONTROL R R RED R BorC C BLK C CONTACTOR Y Y YEL Y O O ORG T2 T1 O W W2 WHT W LorX PUR X/L G G BRN W1/66 FIELD W1 GRY T CC INSTALLED E 2 JUMPER BK 1 DEHUMIDIFICATION CONTROL CONNECTION JUMPER TERMINALS E AND W TO HEAT (Humidistat* Jumper must be removed) ON FIRST STAGE DURING EMERGENCY HEAT. 2 GND. LUG TERMINAL NOT USED ON ALL THERMOSTATS. POWER WIRING 24V CONTROL WIRING (NEC CLASS 2) CIRCUIT BREAKER*** L2 M L1 POWER WIRING 208/ GND. SCREW 3 CHECK THE LOW VOLTAGE TERMINAL BLOCK ON THE INDOOR UNIT FOR THE ACTUAL ARRANGEMENT OF THE TERMINALS. 4 CONNECT POWER WIRING TO TERMINAL BLOCK 3TB ON UNITS WITHOUT ELECTRIC HEAT OR CIRCUIT BREAKER. 5 GRAY FOR USE WITH OPTIONAL OUTDOOR THERMOSTAT KITS. 10 Johnson Controls Unitary Products

11 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. THGD30S4(3,4)S1 INDOOR COIL MODEL NO. AHP36 CONDENSING ENTERING AIR TEMPERATURE IDCFM ID DB ( F) ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM. Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handler Coil T.C. S.C. KW FC/MC/PC FC/MC/PC FC/MC/PC FC/MC/PC HC HC HD AHP AHX AHX F4FP F6FP MA12B FC/MC/PC35B MA12B FC/MC/PC43B Furnaces Coils T.C. S.C. KW T*(8,L)X*A12 FC/MC/PC37A T*9X*B12 FC/MC/PC43B T*(8,L)X*B12 FC/MC/PC43B Johnson Controls Unitary Products 11

12 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. THGD36S4(3,4)S1 INDOOR COIL MODEL NO. AHP36 CONDENSING IDCFM ENTERING AIR ID DB ( F) TEMPERATURE ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM. Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handler Coil T.C. S.C. KW FC/MC/PC FC/MC/PC FC/MC/PC HC HD HD AHX AHX AHX F4FP F6FP F6FP F6FP MA12B FC/MC/PC43B MA14D FC/MC/PC48D Furnaces Coils T.C. S.C. KW T*9X*B12 FC/MC/PC43B T*(8,L)X*B12 FC/MC/PC43B T*(8,L)X*C16 FC/MC/PC43C T*9X*C16 FC/MC/PC43C T*(8,L)X*C20 FC/MC/PC43C T*9X*C20 FC/MC/PC43C Johnson Controls Unitary Products

13 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. INDOOR COIL MODEL NO. CONDENSING ENTERING AIR TEMPERATURE THGD42S4(3,4)S1 FC/MC/PC48 IDCFM ID DB ( F) ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM. Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handler Coil T.C. S.C. KW FC/MC/PC HC HC HD AHP/SHP AHX AHX AHX F4FP F5FP F6FP F6FP F6FP MA14D FC/MC/PC48D MA16C FC/MC/PC48C MA14D FC/MC/PC60D MA16C FC/MC/PC60C Furnaces Coils T.C. S.C. KW T*(8,L)X*C16 FC/MC/PC48C T*9X*C16 FC/MC/PC48C T*(8,L)X*C20 FC/MC/PC48C T*9X*C20 FC/MC/PC48C T*9X*D20 FC/MC/PC48D T*(8,L)X*C16 UC48C T*9X*C16 UC48C T*(8,L)X*C20 UC48C T*9X*C20 UC48C T*9X*D20 UC48D Johnson Controls Unitary Products 13

14 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. THGD48S4(3,4)S1 INDOOR COIL MODEL NO. AHP/SHP48 CONDENSING IDCFM ENTERING AIR ID DB ( F) TEMPERATURE ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM. Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handler Coil T.C. S.C. KW FC/MC/PC FC/MC/PC HC HD MC AHP AHX AHX F5FP F5FP F6FP F6FP MA16C FC/MC/PC48C MA20D FC/MC/PC48D MA16C FC/MC/PC60C MA20D FC/MC/PC60D MA20D MC62D Furnaces Coils T.C. S.C. KW T*(8,L)X*C16 FC/PC60C T*9X*C16 FC/PC60C T*(8,L)X*C20 FC/MC/PC60D T*9X*C20 FC/PC60C T*9X*D20 FC/MC/PC60D T*9X*D20 FC/MC62D T*(8,L)X*C16 UC60C T*(8,L)X*C20 UC60D T*9X*C16 UC60C T*9X*C20 UC60C T*9X*D20 UC60D Johnson Controls Unitary Products

15 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. INDOOR COIL MODEL NO. CONDENSING ENTERING AIR TEMPERATURE THGD60S4(3,4)S1 FC/MC62 IDCFM ID DB ( F) ID WB ( F) T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW T.C S.C KW NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM. Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handler Coil T.C. S.C. KW AHX F6FP MA20D MC62D Furnaces Coils T.C. S.C. KW T*(8,L)X*C20 FC/MC62D T*9X*D20 FC/MC62D Johnson Controls Unitary Products 15

16 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO THGD30S4(3,4)S1 EVAPORATOR COIL MODEL NO AHP36 AIR TEMP. AIR TEMP. ID CFM ENTERING ENTERING OUTDOOR UNIT INDOOR COIL MBTUH KW C.O.P. MBTUH KW C.O.P. MBTUH KW C.O.P NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM. Multipliers for determining the performance with other indoor sections. Air Handler Coil MBH KW COP FC/MC/PC FC/MC/PC FC/MC/PC FC/MC/PC HC HC HD AHP AHX AHX F4FP F6FP MA12B FC/MC/PC35B MA12B FC/MC/PC43B Furnaces Coils MBH KW COP T*(8,L)X*A12 FC/MC/PC37A T*9X*B12 FC/MC/PC43B T*(8,L)X*B12 FC/MC/PC43B Johnson Controls Unitary Products

17 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO THGD36S4(3,4)S1 EVAPORATOR COIL MODEL NO AHP36 AIR TEMP. AIR TEMP. ID CFM ENTERING ENTERING OUTDOOR UNIT INDOOR COIL MBTUH KW C.O.P. MBTUH KW C.O.P. MBTUH KW C.O.P NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM. Multipliers for determining the performance with other indoor sections. Air Handler Coil MBH KW COP FC/MC/PC FC/MC/PC FC/MC/PC HC HD HD AHX AHX AHX F4FP F6FP F6FP F6FP MA12B FC/MC/PC43B MA14D FC/MC/PC48D Furnaces Coils MBH KW COP T*9X*B12 FC/MC/PC43B T*(8,L)X*B12 FC/MC/PC43B T*(8,L)X*C16 FC/MC/PC43C T*9X*C16 FC/MC/PC43C T*(8,L)X*C20 FC/MC/PC43C T*9X*C20 FC/MC/PC43C Johnson Controls Unitary Products 17

18 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO THGD42S4(3,4)S1 EVAPORATOR COIL MODEL NO FC/MC/PC/UC48 AIR TEMP. AIR TEMP. ID CFM ENTERING ENTERING OUTDOOR UNIT INDOOR COIL MBTUH KW C.O.P. MBTUH KW C.O.P. MBTUH KW C.O.P NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM. Multipliers for determining the performance with other indoor sections. Air Handler Coil MBH KW COP FC/MC/PC HC HC HD AHP/SHP AHX AHX AHX F4FP F5FP F6FP F6FP F6FP MA14D FC/MC/PC48D MA16C FC/MC/PC48C MA14D FC/MC/PC60D MA16C FC/MC/PC60C Furnaces Coils MBH KW COP T*(8,L)X*C16 FC/MC/PC48C T*9X*C16 FC/MC/PC48C T*(8,L)X*C20 FC/MC/PC48C T*9X*C20 FC/MC/PC48C T*9X*D20 FC/MC/PC48D T*(8,L)X*C16 UC48C T*9X*C16 UC48C T*(8,L)X*C20 UC48C T*9X*C20 UC48C T*9X*D20 UC48D Johnson Controls Unitary Products

19 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO THGD48S4(3,4)S1 EVAPORATOR COIL MODEL NO AHP/SHP48 AIR TEMP. AIR TEMP. ID CFM ENTERING ENTERING OUTDOOR UNIT INDOOR COIL MBTUH KW C.O.P. MBTUH KW C.O.P. MBTUH KW C.O.P NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM. Multipliers for determining the performance with other indoor sections. Air Handler Coil MBH KW COP FC/MC/PC FC/MC/PC HC HD MC AHP AHX AHX F5FP F5FP F6FP F6FP MA16C FC/MC/PC48C MA20D FC/MC/PC48D MA16C FC/MC/PC60C MA20D FC/MC/PC60D MA20D MC62D Furnaces Coils MBH KW COP T*(8,L)X*C16 FC/PC60C T*9X*C16 FC/PC60C T*(8,L)X*C20 FC/MC/PC60D T*9X*C20 FC/PC60C T*9X*D20 FC/MC/PC60D T*9X*D20 FC/MC62D T*(8,L)X*C16 UC60C T*(8,L)X*C20 UC60D T*9X*C16 UC60C T*9X*C20 UC60C T*9X*D20 UC60D Johnson Controls Unitary Products 19

20 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO THGD60S4(3,4)S1 EVAPORATOR COIL MODEL NO FC/MC62 AIR TEMP. AIR TEMP. ID CFM ENTERING ENTERING OUTDOOR UNIT INDOOR COIL MBTUH KW C.O.P. MBTUH KW C.O.P. MBTUH KW C.O.P NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM. Multipliers for determining the performance with other indoor sections. Air Handler Coil MBH KW COP AHX F6FP MA20D MC62D Furnaces Coils MBH KW COP T*(8,L)X*C20 FC/MC62D T*9X*D20 FC/MC62D Subject to change without notice. Printed in U.S.A. Copyright 2009 by Johnson Controls, Inc. All rights reserved. Johnson Controls Unitary Products 5005 York Drive Norman, OK UTG-B-0309 Supersedes: UTG-A-0608