F627 DOUBL DOUBLE EC E E C C E C N E TRI R C I BUTTER E F R LY L VA Y V LV L ES E BS EN 593
|
|
|
- Drusilla Strickland
- 6 years ago
- Views:
Transcription
1 F627DOUBLE ECCENTRC BUTTERFLY VALVES BS EN 93
2 The Keystone Figure 627 PQ is a Bi-directional, double eccentric, resilient seated butterfly valve, available in double flanged and wafer configurations. Features: Double eccentric closing action reduces torque and seat contact during operation extending the valves life and seating reliability. Designed & tested for both on / off and modulating service. Epoxy backed seat fitted after coating ensures no opportunity for corrosion behind the seating area. Dovetail seat locking construction eliminates the need for seat retaining mechanisms that can loosen or corrode in service. Subject to the valve size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the valve without disassembly from or draining of the pipeline. (sizes > DN300) Optional 316 High Velocity Oxygen Fuel (HVOF) applied stainless steel disc edge is available for increased disc edge protection from cavitation on sizes > DN300. All ferrous components are coated with 20 Microns of Fusion Bonded Epoxy for superior corrosion resistance and long life. Lifting lugs and foot mounting points are integral to the body for easy transportation. Fully rated bidirectional design. Top mounting plates conform to SO 211 for mounting actuators. Disc connection to the shaft by encapsulated blind pinning with mechanical retainers eliminating potential leak paths and possible pin dislodgement.
3 Double Eccentric, Bi Directional Design Upper stub shaft features: Dual high tensile steel pins for high torque transfer Blind pinning prevents water path through the disc Mechanically retained pins ensure reliability Three O-Ring seals each with PTFE backing rings Dual PTFE zinc reinforced shaft bearings. Seat Arrangement: DN Dovetail seat construction prevents seat wash out, even in extreme operating conditions. Seat installed after fusion bonded epoxy coating, eliminating under seat corrosion risk. Subject to the level of damage seat repair in service may be possible Lower stub shaft features: Ball bearing for vertical installation applications Three O-Ring seals each with PTFE backing rings Dual PTFE zinc reinforced shaft bearings. Adjustable lower bearing plate Technical data Size range Wafer: DN0 DN600 Size range Flanged: DN0 DN1600 Operating Pressure: PN10, PN16 (DN PN10 only) Operating Temperature: Up to 70Deg C Mounting Top: SO 211 Face to Face Flanged: EN8 - Basic Series 13 Face to Face Wafer: EN8 - Basic Series 20 Suitable media: Potable & Raw water, clean air, others on request Available Drilling: EN1092 / SO 700 PN, 10,16, Other drillings on request
4 DN DN No. Part Name Material Standard Grade 1 Shaft Key Carbon Steel ASTM A29 / 29M AS Retaining Plate Zinc Coated Steel ASTM A29 / 29M ASTM A70 Gr.A 3 Back up Rings PTFE N-A Commercial 4 Replaceable O-Rings NBR EN NBR Shaft Bearings PTFE & Zinc Coated Steel SO347-4 PTFE Upper Stub Shaft Stainless Steel ASTM A276 AS O-Rings NBR / EPDM EN NBR / EPDM-70 8 Back up Rings PTFE N-A Commercial 9 Valve Body Ductile ron/fbe Coated EN163 EN-JS Seat Ring (Seal) EPDM (optional NBR) EN EPDM Locking Washer Stainless Steel ASTM A276 AS Fasteners Stainless Steel ASTM A276 AS Formed pin retainer Stainless Steel ASTM A276 AS Valve Disc Ductile ron/fbe Coated EN163 EN-JS Lower Stub Shaft Stainless Steel ASTM A276 AS Spacer Stainless Steel ASTM A276 AS Bearing Cover Plate Ductile ron/fbe Coated EN163 EN-JS Cover Fasteners Stainless Steel ASTM A276 AS Bearing Tension Set Screws Stainless Steel ASTM A276 AS Bearing Cover Plate O-Ring NBR / EPDM EN NBR / EPDM Thrust Bearing Ball Bearing N-A Commercial 22 Shaft Disc Pins Carbon Steel ASTM A29 / 29M ASTM Epoxy Seal Plug (in Body) Brass ASTM B111/111M C Shaft Disc Pins Stainless Steel ASTM A276 AS Top plate set screws Stainless Steel ASTM A276 AS Hexagon Set Screw Stainless Steel ASTM A276 AS Shaft Retaining Circlip Carbon Steel Zinc Coated N-A Commercial 28 Sealing Plug Carbon Steel Zinc Coated ASTM A29 / 29M AS Valve Disc (Encapsulated) Ductile ron / EPDM or NBR Coated EN163 / EN681-1 EN-JS 1040 / EPDM Seal Retaining Ring PTFE N-A Commercial
5 Bare Shaft Dimensions *1 DN0-300 Encapsulated disc E F Double Flanged DN F C E d K B d C H J DN Seal in body E F B C A G L d K B H SO 211 Top Plate Data Valve A B C d E F G H J K L SO Shaft Key PCD No. Hole Size mm mm mm mm mm mm mm mm mm mm mm mm mm 211 mm WxH Ø of Ø PN10 PN16 PN10 PN16 Fig mm mm holes mm N-A F0 9x9 N-A N-A F0 9x9 N-A N-A F0 9x9 N-A N-A F07 11x11 N-A N-A F07 17x17 N-A F07 17x17 N-A F10 Ø2 8x F10 Ø28 8x F12 Ø32 10x F12 Ø3 10x F12 Ø3 10x F12 Ø4 14x F16 Ø0 14x F16 Ø0 14x N-A N-A 634 N-A F2 Ø7 20x N-A N-A 736 N-A F2 Ø7 20x N-A N-A 841 N-A F2 Ø7 20x N-A N-A 916 N-A F30 Ø100 28x N-A N-A 1107 N-A F30 Ø120 32x N-A N-A 1297 N-A F3 Ø10 36x N-A N-A N-A 1486 N-A 49.0 N-A F3 Ø10 36x * NOTE: 1. Preferred valve orientation is with the stub shafts in the horizontal position.
6 Estimated Operating Torque Estimated Operating Torque Valve Weight (kg) DN Standard FBE Disc Edge Optional 316 SS Disc Edge Wafer Flange PN10 PN16 PN10 PN N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N-A N-A N-A N-A N-A N-A N-A 3200 N-A N-A 3100 NOTE: ndicated values are a guide based on normal operating conditions (potable water service at atmospheric temperature). They are the sum of forces to overcome seating & unseating friction at the indicated unbalanced pressure, in the preferred flow direction. Additional factors of safety are not required when sizing actuators for normal conditions. Values do not include the effect of dynamic torque which may be significant in high velocity applications. Kv Values vs. Travel Position Angle of Opening (Degrees) DN NOTE: ndicated values are theoretical based on selective size testing and interpolated across the size range, they should be used as an indication only, Contact Tyco Water for specific data relating to your application.
7 nstallation Dimensions Double Flanged Q Q R A S A T P P Wafer Type W R X Q V P DN P Q R S T V W X N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 700 N-A N/A N/A N/A 800 N-A N/A N/A N/A 900 N-A N/A N/A N/A 1000 N-A N/A N/A N/A 1200 N-A N/A N/A N/A 1400 N-A N/A N/A N/A 1600 N-A N/A N/A N/A NOTE: Dimensions are provided at the time of printing using dimensions for current actuators and construction. Due to constant product improvement these dimensions may alter from time to time. Contact Tyco Water for the latest updated dimensions in critical applications.
8 Tyco Water Asia 17A W Square Building, Hennessy Road, Wanchai, Hong Kong SAR Phone: Fax: Due to constant product improvements Tyco reserves the right to change or modify this data without notice. March 2009
AVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)
Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /
KEYSTONE FIGURE 9 BUTTERFLY VALVE
A resilient seated butterfly valve for general purpose applications FEATURES Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
Keystone Butterfly Valve Figure 9
A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
KEYSTONE PN16 DOUBLE FLANGED BUTTERFLY VALVE FIGURE 631
The F631 PN16 is a bi-directional, double flanged, resilient seated butterfly valve FEATURES Approved to AS/NZS 4020, making the F631 suitable for use in potable water applications. Type tested in accordance
flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
Keystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
BrewSeal butterfly valves Wafer and lugged
Wafer and lugged KEYSTONE Resilient seated butterfly valves DN40-DN800 wafer and lugged versions, optimized for the food and beverage industry. Features Top bushing absorbs actuator side thrust loads.
The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications.
Butterfly Valve ParaSeal range The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Features The field replaceable seat fully
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
Keystone Figure 9 Butterfly Valve
A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
AVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)
AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
KEYSTONE BUTTERFLY VALVE PARASEAL RANGE
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,
The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications.
The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. Features Wafer and lugged body design with face-to-face dimension, according to
RESILIENT SEATED GATE VALVE FAF 6200
PRODUCTION STANDARTS DN40 DN800 PN 10-16 Design EN 1171 / EN 1074 Connection Face to Face EN 1092-2 / ISO 7005-2 - Flanged EN 558 Series 15 / DIN 3202 F5 Marking EN 19 Tests EN 12266-1 Corrosion Protection
AWWA C 504 Type - Butterfly Valves AWWA C 504 BUTTERFLY VALVES
AWWA C 504 BUTTERFLY VALVES 19 PRODUCT FEATURES: NSF Certified Fusion Bonded Epoxy Coating and EPDM rubber are used for valves to be used for in direct contact with potable (drinking) water, while all
AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING
AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING SERVICE MEMBER OF THE GROUP GATE VALVE RESILIENT SEATED FULLY VULCANIZED WEDGE Product series: S02, S21, S06, S15, S55 Rising stem/non rising
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
series BUTTERFLY VALVE DOUBLE ECCENTRIC FLANGED FAF 3800 PRODUCTION STANDARDS DN100 DN2000 PN Design EN 593 EN ISO Flanged
PRODUCTION STANDARDS DN100 DN2000 PN 10-16-25 Design EN 593 Connection End Connection EN 1092-2 ISO 7005-2 - Flanged EN 558 Series 14 DIN 3202 F4 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
Series 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
KEYSTONE OPTISEAL WAFER AND LUGGED
A resilient seated butterfly valve for general purpose applications FEATURES GENERAL APPLICATION Food and beverage processing, dry bulk conveying, paper mills, slurry handling etc. Grease or silicone free
KEYSTONE BUTTERFLY VALVE PARASEAL RANGE
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,
Keystone Butterfly valve ParaSeal range
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,
AVK (WWE) BUTTERFLY VALVE DN (2" to 56") 75 (EVS)
AVK (WWE) BUTTERFLY VALVE DN 50 1400 (2" to 56") 75 (EVS) Wafer type Face to face dimension to ISO 5752 short, basic series 20 (BS 5155 wafer short, DIN 3202K1) Flange connection to ISO 70052 (BS EN 10922,
Keystone resilient seated butterfly valves Figure 221 and 222
Figure 221 and 222 An economical bonded resilient seated butterfly valve for bi-directional and end-of-line service F221 Wafer style valve F222 Lugged style valve Features Bubble tight shut-off at full
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
Keystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
Dura Water Wafer Butterfly Valve
Dura Water Wafer Butterfly Valve Specifications Recommended use Features Working Pressure The Dura butterfly valve is a soft sealing valve for installation with flanges drilled in accordance with AS 2129
Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style
Wafer style Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance. Features General application
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style
Wafer style Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance Features General application Since
Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style Sizes DN PN 10/16
Wafer style Sizes DN -3 PN /1 Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance. Features Patented
KEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
ISO-DE Double Eccentric Butterfly Valves
ISO-DE Double Eccentric Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck length according HeizAnlV. External
MODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2" to 8" (106-PG) 3" to 10" (206-PG) Installation, Operating and Maintenance Instructions
MODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2" to 8" (106-PG) 3" to 10" (206-PG) Installation, Operating and Maintenance Instructions DESCRIPTION: This valve is the basic component used for most
Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation
Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug
KEYSTONE K-LOK SERIES H HIGH PERFORMANCE BUTTERFLY VALVES
Series H1 ASME Class 150 / 25 bar Series H2 ASME Class 300 / 50 bar FEATURES GENERAL APPLICATIONS Airport refueling Hydrocarbon processing Chlorine Chemical processing Purified gas Steam and vacuum services
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
BALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
AVK DOUBLE ECCENTRIC BUTTERFLY VALVE, PN 10/16, INTEGRAL SEAT, IP 67 GEARBOX WITH HANDWHEEL
AVK OUBE EENTRI BUTTERFY VAVE, PN 10/16, INTEGRA SEAT, IP 67 GEARBOX WITH HANWHEE 00 019 ouble eccentric butterfly valve, for water to max. 70, designed according to EN 593, Face to face according to EN
KEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL
KEYSTONE SERIES GR RESILIENT SETED BUTTERFLY VLVES GRW/GRL heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry
Keystone Figure 990 and 920 Resilient Seated Butterfly Valves
A split body thin disc valve for high flow and modulating service Figure 990 - Wafer body design Figure 920 - Lugged body design Features General application Figure 990 and 920 valves are used when modulating
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange No Component Material 1 Body Ductile iron GGG40 2 Wedge DI Fully Vulcanised EPDM 3 Wedge Nut Brass 4 Stem SS420 5 Bolt Q235+Zinc 6 Gasket EPDM
Válvulas AG1-BD BUTTERFLY VALVE. From 1970 close to our clients
Válvulas AG1-BD BUTTERFLY VALVE From 1970 close to our clients Technical datasheet Butterfly valve.. Edition 2.5 06/2017 ANGODOS Since 1970 ANGODOS has been technological leader in valves industry, manufacturing
HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES
BFV-2 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Rev. 09/09 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Now you can turn high pressure applications into low risk decisions by turning to high performance
BUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company
BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 1-20 (25mm-500mm) The High Performance Company SERIES 20 1-20 (25mm-500mm) Bray Controls is proud to offer a high quality
25mm-500mm (1"- 20") SERIES 20/21 Wafer/Lug BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED. The High Performance Company
BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 25mm-500mm (1"- 20") The High Performance Company SERIES 20 25mm 500mm (1" 20") Bray Controls is proud to offer a high quality
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
Product data sheet Wouter Witzel - EVFSGD Valves Rubber Lined - Centric EVFS PDS H
DESIGN Body Double Flanged type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series 13
ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
DJ Series Butterfly Valves
DJ Series Butterfly Valves European Edition Flange Table Wafer Lugged :Standard mounting :Special mounting (Proper centering is required) :Not coverd by standard DJ series Explanation of Product Code G
2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company
butterfly valves resilient seated series 30/31 Wafer/Lug 2"- 20" (50mm-500mm) The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality line of butterfly
Installation Operation Maintenance. LSSN Butterfly Valve AGA Approved 50MM - 150MM. QAD#IM6055.REVA
LSSN Butterfly Valve Installation Operation Maintenance Licence Number: 5326 www.challengervalves.com.au 1 Index 1. INTRODUCTION 1.1 Design Features 3 1.2 Flange and Pipe Compatibility 4 1.3 Operating
Triple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
BULLETIN 46.00-2B OCTOBER 2015 DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS - Materials of Construction - Specifications - Ordering - Dimensions
HYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
BF Series Wafer/Lug Butterfly Valves
BF Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com
KEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Keystone Butterfly valve ParaSeal range
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
Valve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
HDPE FUSIBLE VALVES EXPECT INNOVATION
AVK HDPE FUSIBLE VALVES HDPE FUSIBLE VALVES EXPECT INNOVATION AVK HDPE VALVES SERIES 89 FUSIBLE BUTTERFLY VALVE Series 89 fusible butterfly valves are designed for quick, direct heat butt-fusion or electrofusion
Series 709 Butterfly Valves (175 psi/1270 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series 709 Butterfly Valves (175 psi/1270 kpa) 08.03 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 709 grooved end butterfly valve offers
VALVE COMPANY WAFER & LUG TYPE BUTTERFLY VALVES
VALVE COMPANY WAFER & LUG TYPE BUTTERFLY VALVES GENERAL CHARACTERISTICS: BS EN 593 CONSTRUCTION: Body: ENGJL Cast Iron (GG25) Disc : Stainless Steel Seat : EPDM, NBR, FPM (Viton) Stem : XCr13 (Stainless
2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company
BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves
BUTTERFLY VALVES HIGH PERFORMANCE
VALVE MANUFACTURER FOR INDUSTRIAL AND WATER APPLICATIONS BUTTERFLY VALVES HIGH PERFORMANCE Pressure : PN10 ~ PN40 / Class 150 ~ 300 Size : Basic Type : 2" ~ 48" (50mm ~ 1200mm) Fire Safety Type : 2" ~
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
Sealing Test Pressure (MPa)
TRIPLE ECCENTRIC BUTTERFLY VALVE Triple Eccentric Butterfly Valve provides a tight shut-off. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without
High performance valve with Nitrile/VITON elastomer. DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.
Type series booklet 8460.1215/7--10 High performance valve with Nitrile/VITON elastomer DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.34 Applications Marine,
Standard Product Range
Standard Product Range Standard Pressure onnection Nominal size inch Product code mm ASME 150/200 psi Wafer Lugged 1 150/200 DJ 1 150/200 DJL Standard Product Range EN PN10 PN16 PN25 Wafer Lugged Wafer
Series 706 Butterfly Valves (300 PSI/2065 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series 706 Butterfly Valves (300 PSI/2065 kpa) 08.17 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 706 grooved end butterfly valve offers
BS 5163 Resilient Wedge Gate Valve
BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,
American Flow control Series 2500
American Flow control 14-66 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Lifting DEVICES 14-66 Valve is constructed of high-strength
Series W709 AGS Butterfly Valves (175 psi/1270 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series W709 AGS Butterfly Valves (175 psi/1270 kpa) 20.07 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W709 AGS (Advanced Groove System)
BUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
Keystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
BF Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901
PRATT INDUSTRIAL BF Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 About Pratt Industrial Pratt Industrial specializes in the design, engineering, and worldwide
DOUBLE ECCENTRIC DOUBLE FLANGED BUTTERFLY VALVES. TIS asia
DOUBLE ECCENTRIC DOUBLE FLANGED BUTTERFLY VALVES VALVES DEDICATED TO THE WATER DISTRIBUTION NETWORK AND HYDROPOWER SECTOR WE DO NOT SELL JUST VALVES, WE SELL A SOLUTION FOR THE EFFICIENCY OF THE WATER
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
VRX Plunger. Advanced Control Valve
VRX Plunger Advanced Control Valve Av-Tek is leading the way in the development, manufacturing, and implementation of high-quality valves for use municipal, industrial, and sea water industries. Our premium
Grooved Butterfly Valves
Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600
Tilting-disc Check Valves Short Body
Tilting-disc Check Valves Short Body Tilting-disc Check Valves, Short Body to DIN 3202 Series F4 for liquids and gases, PN 10 - PN 40, DN 150 - DN 2000 Short Body Tilting-disc Check Valves More than 40
AEGIS RSS Series. Fully Lined Bellows Sealed Control Valves. RSS Series
Fully Lined Bellows Sealed Control Valves Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty Paraflon bellows Special designs for chlorine and high-purity media ASSOCIATE CHLORINE
Motorized Butterfly Valve
Motorized Butterfly Valve Actuated butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN500) for PN16 type For On-Off Control Manual override non-clutch design. Manual operation can be operated
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED SERIES 61, 14" TO 24" 61W - Wafer style and 61L - Lugged style FEATURES
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED 61W - Wafer style and 61L - Lugged style FEATURES Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life