KF O-Ring & Packed Stem Style Needle Valves
|
|
|
- Christian Fox
- 6 years ago
- Views:
Transcription
1 KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low pressures. These valves offer exceptional regulating properties and high flow capacities in the full open position. General Design Features O-Ring Style 1/4"-" NPT, Soft Seat Pressures Up To 6000 PSI At 200 F, Metal Seated Valves With Standard una N Stem Seal Rated Up To 10,000 PSI At 200 & Optional Viton Stem Seal Assemblies Up To 400 F NACE Conformance Available Packed Stem Style 1/4"-1" NPT, Hard & Soft Seat Stainless Steel Stem & Teflon or Grafoil Packing Standard Teflon Packing Is Rated Up To 10,000 PSI At 200 F, Optional HT (Grafoil ) Packing For Temperatures Up To 1000 F NACE Conformance Available Special Features Oversized Extra Heavy ody Resists Abuse & Provides Protection Against Corrosion & Erosion Precision Machined Seat Pocket & onnet Retaining Threads Assure Perfect Alignment & Sealing At onnet /ody Connection & Stem / Seat Interface onnet Locking Pin Secures The onnet & ody Against Accidental Disassembly 316 Stainless Steel Stem With A Precision Ground Conical Seating Tip Valves are available with metal-to-metal or a replaceable nylon seat. Materials of construction include Carbon Steel with 316 Stainless Steel Stem and is optionally available in all 316 Stainless Steel. Packed Style Angle Valve O-Ring Style Gauge Valve O-Ring Style Needle Valve Permanently Lubricated Threads With High Quality Anti-seize Compound Increase Service Life y Preventing Galling & Freeze Up. Fourteen Pitch Threads Provide Uncompromised Load earing Capacity While Maintaining Flow Soft Seat Valves Include A One Piece Replaceable Nylon Seat With Retaining Lug To Provide Protection Against Seat Failures Caused y Seat Rotation Contents Design Features, O-Ring Style & Packed Stem Style , 3 Dimensional Data (in.,mm) & Part Numbers, O-Ring Style Needle Valves Dimensional Data (in.,mm) & Part Numbers, O-Ring Style Gauge Valves Dimensional Data (in.,mm) & Part Numbers, Packed Stem Style Needle Valves Dimensional Data (in.,mm) & Part Numbers, Packed Stem Style Gauge Valves Parts & Materials, O-Ring Style Needle Valves Parts & Materials, Packed Stem Style Needle Valves Part Number Codes, O-Ring & Packed Stem Style Gauge & Angle Needle Valves Engineering Data, O-Ring & Packed Stem Style Needle Valves KF O-Ring & Packed Stem Style Needle Valves
2 KF O-Ring & Packed Stem Style Needle Valve Design Features O-Ring Style Packed onnet Style ack Seat Stem Design ack seat stem design helps prevent fire feeding leakage. High strength stem threads provide extended life and low torque operation Metal-to-Metal Stem Seating Positive metal-to-metal stem seating arrangement in all metal seat valves assure drop-tight sealing up to 10,000 PSI. Replaceable Seat Tough nylon, replaceable seat in all soft seat valves is secured by an anti-rotation lug. O-Ring Style Stem Seal Abrasion resistant, 90 Durometer O-ring stem seal and backup ring isolates corrosive flow media from critical stem thread area. Adjustable Teflon /Grafoil Packed Stem Style Seal Inert Teflon stem packing and micro-finish stem offer sealing dependability. Adjustable packing nut insures continuous sealing protection KF O-Ring & Packed Stem Style Needle Valves 3
3 KF O-Ring Style Needle Valves Dimensional Data (in., mm) & D F 1/4" 2 3 /4" A G Orifice 4 5 /8" 1 /4" Orifice E 1 1 /4" Sq. C Dimensional Data (in, mm) Series 23 & 24 Metal Seated & Series 25 & 26 Soft Seated Valves 5 /8" 2 1 /8" Dimension (in., mm) NPT Connection A C D E F G Weight (in.) in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg 1/4 FNPT x FNPT 3 5 / / / / / / / MNPT x FNPT 3 5 / / / / / / / FNPT x FNPT 3 5/ / / / / / / MNPT x FNPT 3 5 / / / / / / / FNPT x MNPT 3 5 / / / / / / / Series 23 & 24 Metal Seated & Series 25 & 26 Soft Seated Valves NPT Connection Series 23 & 24 Metal Seated Valve Assemblies Series 25 &26 Soft Seated Valve Assemblies (in.) Carbon Steel 316SS 316SS NACE Carbon Steel 316SS 316SS NACE 1/4 FNPT x FNPT N24-14 N N26-14 N26-14 MNPT x FNPT N N N N FNPT x FNPT N24-12 N N26-12 N26-12 MNPT x FNPT N N FNPT x MNPT N N Dimensional Data & Series 23 & 24 Metal Seated Angle Valves NPT Connection Series 23& 24 Metal Seated Valve Assemblies Weight (in.) Carbon Steel 316SS 316SS NACE lbs. kg A N24-125A N24-125A KF O-Ring & Packed Stem Style Needle Valves
4 KF O-Ring Style Gauge Valves Dimensional Data (in., mm) & D F A 1 3/8" G Orifice E Sq. C Dimensional Data (in, mm) Series 21 & 22 Metal Seated & Series 27 & 28 Soft Seated Valves Dimension (in., mm) NPT Connection A C D E F G Weight (in.) in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg 3 FNPT x 1MNPT 3 5 / / / / / / / FNPT x 1MNPT 3 5 / / / / / / / Fx 3/4 M 3 FNPT x 1MNPT 3 5/ / / / / / / Series 21 & 22 Metal Seated & Series 27 & 28 Soft Seated Valves NPT Connection Series 21 & 22 Metal Seated Valve Assemblies Series 27 &28 Soft Seated Valve Assemblies (in.) Carbon Steel 316SS 316SS NACE Carbon Steel 316SS 316SS NACE 3 FNPT x 1 MNPT N N N FNPT x 1 MNPT L N22-125L N22-125L Fx 3/4 M 3 FNPT x 1 MNPT N N N N leed Valves Weight NPT (in.) Carbon Steel 316SS 316SS NACE lbs. kg KF O-Ring & Packed Stem Style Needle Valves 5
5 KF Packed Stem Style Needle Valves Dimensional Data (in., mm) & D F 3 /8" 2 3 /4" A G Orifice 4 5 /8" 1 /4" Orifice E 1 1 /4" Sq. C Dimensional Data (in, mm), Series 13 & 14 Metal Seated & Series 15 & 16 Soft Seated Valves Dimension (in., mm) A C D E F G G Weight NPT Connection Metal Seat Soft Seat Metal Seat Soft Seat (in.) in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg 1/4 3/4 1 5 /8" 2 1 /8" FNPT x FNPT 3 5 / / / / / / / / / MNPTx FNPT 3 5 / / / / / / / / / FNPT x FNPT 3 5 / / / / / / / / / MNPTx FNPT 3 5 / / / / / / / / / FNPT x MNPT 3 5 / / / / / / / / / MNPTx FNPT 3 5 / / / / / / / / / FNPT x FNPT 5 3 / / / / / / / MNPTx FNPT 5 3 / / / / / / / FNPT x FNPT 5 3 / / / / / / / MNPTx FNPT 5 3 / / / / / / / , Series 13 & 14 Metal Seated & Series 15 & 16 Soft Seated Valves NPT Connection Series 13 & 14 Metal Seated Valve Assemblies Series 15 &16 Soft Seated Valve Assemblies (in.) Carbon Steel 316SS 316SS NACE Carbon Steel 316SS 316SS NACE 1/4 FNPT x FNPT 13-14HT N14-14HT N14-14HT N16-14 N16-14 MNPTx FNPT HT N14-145HT N14-145HT N N FNPT x FNPT 13-12HT N14-12HT N14-12HT N16-12 N16-12 MNPTx FNPT HT N14-125HT N14-125HT N FNPT x MNPT N14-12HT N14-12HT MNPTx FNPT HT N14-125HT N14-125HT 3/4 FNPT x FNPT 13-34HT N14-34HT N14-34HT POA* POA* POA* MNPTx FNPT HT N14-345HT N14-345HT POA* POA* POA* 1 FNPT x FNPT 13-10HT N14-10HT N14-10HT POA* POA* POA* MNPTx FNPT HT N14-105HT N14-105HT POA* POA* POA* *POA Minimum purchase required. Dimensional Data &, Series 13 &14 Metal Seated Angle Valves NPT Connection Series 13& 14 Metal Seated Valve Assemblies Weight (in.) Carbon Steel 316SS 316SS NACE lbs. kg A N14-125AHT N14-125AHT KF O-Ring & Packed Stem Style Needle Valves
6 KF Packed Stem Style Gauge Valves Dimensional Data (in., mm) & D F A 1 3/8" G Orifice E Sq. C Dimensional Data (in, mm) Series 11 & 12 Metal Seated & Series 17 & 18 Soft Seated Valves Dimension (in., mm) NPT Connection A C D E F G Weight (in.) in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg 3 FNPT x 1MNPT 3 5 / / / / / / / FNPT x 1MNPT 3 5 / / / / / / / Fx 3/4 M 3 FNPT x 1MNPT 3 5/ / / / / / / Series 11 & 12 Metal Seated & Series 17 & 18 Soft Seated Valves NPT Connection Series 11 & 12 Metal Seated Valve Assemblies Series 17 &18 Soft Seated Valve Assemblies (in.) Carbon Steel 316SS 316SS NACE Carbon Steel 316SS 316SS NACE 3 FNPT x 1 MNPT HT N12-125HT N12-125HT N FNPT x 1 MNPT LHT N12-125LHT N12-125LHT POA* POA* POA* Fx 3/4 M 3 FNPT x 1 MNPT HT N HT N HT POA* N N *POA Minimum purchase required. leed Valves Weight NPT (in.) Carbon Steel 316SS 316SS NACE lbs. kg KF O-Ring & Packed Stem Style Needle Valves 7
7 KF O-Ring Style Needle Valves, Parts & Materials Soft Seat Only Optional leed Screw Parts List & Materials Part Materials Description No. Carbon Steel 316 Stainless Steel NACE* 1 ody Carbon Steel AISI 1215 or 12L Stainless Steel (or CF8M) 2 onnet Carbon Steel AISI 1215 or 12L Stainless Steel 3 Stem 316 Stainless Steel 4 Stem Seal una N 5 Stem Seal ackup Ring una N 6 Sleeve Carbon Steel AISI 1215 or 12L Stainless Steel 7 Handle Carbon Steel AISI 1215 or 12L Stainless Steel 8 Handle Screw Carbon Steel Stainless Steel 9 onnet Locking Pin Spring Steel Stainless Steel 10 Seat (Soft Seat Only) Nylon 11 oot Polyethylene 12 leed Screw (Optional) 316 Stainless Steel *NACE valves, sour gas assembly. Valves are manufactured of 316SS. All parts RC 22 or less meet NACE MR0175 standards. Working pressures same as standard valves. 8 KF O-Ring & Packed Stem Style Needle Valves
8 KF Packed Stem Style Needle Valves, Parts & Materials 10 Soft Seat Only Optional leed Screw Parts List & Materials Part Materials Description No. Carbon Steel 316 Stainless Steel NACE* 1 ody Carbon Steel AISI 1215 or 12L Stainless Steel (or CF8M) 2 onnet Carbon Steel AISI 1215 or 12L Stainless Steel 3 Stem 1/4" & 1 /2" 316 Stainless Steel 3/4" & 1" 303 Stainless Steel 316 Stainless Steel 4 Packing Teflon or Grafoil 5 Retainer Carbon Steel AISI 1215 or 12L Stainless Steel 6 Packing Nut Carbon Steel AISI 1215 or 12L Stainless Steel 7 Handle Carbon Steel AISI 1215 or 12L Stainless Steel 8 Handle olt Carbon Steel 316 Stainless Steel 9 Locking Pin Carbon Steel 316 Stainless Steel 10 Seat (Soft Seat Only) Nylon 11 leed Screw (Optional) 316 Stainless Steel *NACE valves, sour gas assembly. Valves are manufactured of 316SS. All parts RC 22 or less meet NACE MR0175 standards. Working pressures same as standard valves. KF O-Ring & Packed Stem Style Needle Valves 9
Hexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
Multi-Port Gauge Valves M5 and M51
Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration
Anderson Greenwood M24A/M24T Differential Pressure Manifolds
Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum
High-Pressure Needle Valves
www.swagelok.com High-Pressure Needle Valves Working pressures up to 4 000 psig (3100 bar) Temperatures up to 40 F (232 C) Weep holes for leak detection Packing below stem threads Nonrotating stem design
Static Pressure Manifolds PTM and PT7 2-Valve Manifolds
Static Pressure Manifolds PTM and PT7 2-Valve Manifolds PT7 PTM Product Overview The PT Two-Valve Calibration Manifolds are used on static pressure transmitters, switches or gauges. The shutoff valve,
Anderson Greenwood M25/M251 Block and Bleed Gauge Valves
Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit Features General application These valves enable gauges, pressure transmitters or
Natural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds
Natural Gas Manifolds M6A, M6T, M6TA 5- Manifolds Features and Benefits M6A M6A Easy Installation. The lightweight M6A is easily installed in meter tubing. No additional support is generally required.
General Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION
MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
Static Pressure Manifolds M4AP and M4TP Manifolds
Static Pressure Manifolds M4AP and M4TP Manifolds Product Overview The M4AP and M4TP are block and bleed, static pressure manifolds. They are designed for use with DP-style pressure transmitters. The manifold
Instrument Pressure Range Standard Body psi max. High Flow Rate Body psi max.
Basic Information All ESP Types Overall Size Length............................ 12 3/4-in. Max. Diameter All Piston Type...................... 2 1/4-in. Max. 2-in. Diaphragm..................... 2 7/8-in.
Anderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
Anderson Greenwood Series M9 Block and Bleed Gauge Valves
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application
Gauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves
Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities
Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
ANDERSON GREENWOOD H7/H71 HAND VALVES
3 /16 (4.8 mm) orifice hard-seated hand valves for pressures to 6000 and 10000 psig (414 and 689 barg) FEATURES H7 GENERAL APPLICATION H7 series valves are designed for safe, repetitive bubble-tight closure,
Anderson Greenwood PTM/PT7 Static Pressure Manifolds
m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings
Installation Operation and Maintenance Instructions Model Contents
Contents 1.0 General 1.1 Model Number........................... 2 1.2 Specifications............................ 2 1.3 Dimensions.............................. 3 Repair Kit Materials & Part Numbers........
Anderson Greenwood M1/M110 Differential Pressure Manifolds
A 3-valve differential pressure manifold with integral metal seats or replaceable, roddable soft seats for applications requiring remote mounting from the instrument Features General application The M1
V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features
V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim
One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
WKM 320F. Flanged floating ball valves
WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5
Anderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
Static Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
Mallard Control Control Valves
Control Valves Excellence In Flow Control Mallard Model 5100 Freezeless Control (Dump) Valve Features Compact valve size Stainless steel trim Threaded process connections NACE MR0175 compliance option
3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated
![3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated](/thumbs/85/92772568.jpg "3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated")
M50 and H70 ANDERSON GREENWOOD 3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated Features and Benefits Cost savings are realized as the root valves are in-line
The model M Valve Manifold is designed for direct mounting the manifold and transmitter together in a convenient and accessible location.
200 Series M-220 & M-222 2-Valve Manifolds The model M-220 2-Valve Manifold is designed for remote mounting of a static or gauge transmitter. This design permits the user to mount each unit separately
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards
instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
KF Series FA Ball Valves
KF Series FA all Valves Superior Fluid ontrol Products for the Petrochemical and Industrial Markets Series FA all Valves This high quality two-piece split body trunnion mounted ball valve conforms to API
SAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves
SAMPLE CYLINDERS T H E S O L U T I O N F O R G A S S A M P L E S T O R A G E Sample Cylinders & Accessories ISO 9001:2008 Certified Quality System Spun End Cylinders Ultra-Seal Constant Pressure Cylinders
Kerotest KM4AP & KM4TP Static Pressure Manifolds
Kerotest KM4AP & KM4TP Static Pressure Manifolds KM4AP KM4TP Product Brief The KM4AP and KM4TP are two-valve, block and bleed style manifolds. These manifolds are intended for static pressure applications
Contents. General Arrangements 1 Horizontal Mounts 2 Vertical Mounts 3 Transmitter and Adapter Mounts
Contents General Arrangements 1 Horizontal Mounts 2 Vertical Mounts 3 Transmitter and Adapter Mounts Manifolds 4 Ordering Tree 5 Pressure vs. Temperature Ratings 6 5-Valve Manifold Overview 8 5-Valve Manifold
High Pressure Access Systems
High Pressure Access Systems Operation and Maintenance Manual Metal Samples Company A Division of Alabama Specialty Products, Inc. 152 Metal Samples Rd., Munford, AL 36268 Phone: (256) 358-4202 Fax: (256)
Anderson Greenwood Instrumentation Products - Manifolds and Accessories
Anderson Greenwood Instrumentation Products - Manifolds and Accessories Total Flow Control Solutions Flow, Static Pressure and Liquid Level Manifolds Flow Control ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS
Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
we are very grateful to our valuable customers who have shown a deep attention on to KpLÕ s growth and extended generous supports.
introduction we are very grateful to our valuable customers who have shown a deep attention on to KpLÕ s growth and extended generous supports. KpL valve ind. co., Ltd. was established in 1986 and for
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
SUBSEA VALVES
SUBSEA VALVES Fitok Subsea Valves are manufactured with some notable differences to standard models to help ensure effective fluid transfer for the Oil and Gas Industry. Valves within the range include
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
Distributed By: M&M Control Service, Inc
The KM1 is a 3-valve manifold designed for applications where direct mounting to an instrument is impractical or undesirable. This style manifold is mounted to the lines from the instrument and signal
General Specifications
General Specifications GS 22B01C53-01EN-A M-675, M-775 and M-678 5-Valve Manifolds for Natural Gas Differential Pressure INTRODUCTION The PGI 5-Valve manifolds are designed for natural gas service and
Features and Description of Edward Univalve Globe Valves
Features and Description of Edward Univalve Globe Valves 7. 8. 9. 1 10. 2. 11. 12. 3. 4. 5. 6. 1. Stem has ACME threads, is ground to a fine finish and is hardened to resist wear. 2. Yoke bushing material
Model DF233 Control Valves
Features NACE Service Ready Standard construction for the DF233 control valve features NACE trim. The valve bonnet and body also conform to NACE MR075 (National Association of Corrosion Engineers) recommendations.
Model DF233 Control Valves
Features NACE Service Ready Standard construction for the DF2 control valve features NACE trim. The valve bonnet and body also conform to NACE MR075 (National Association of Corrosion Engineers) recommendations.
Needle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
ANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Hand Valves and Accessories Soft Seated Valves Hard Seated Valves Mini Valves Anderson Greenwood is the industry leader in instrument valve technology and the
Fisher Control-Disk Valve NPS 14-24
Control-Disk NPS 14-24 Valve Product ulletin Fisher Control-Disk Valve NPS 14-24 The Fisher Control-Disk valve provides outstanding performance under extreme pressure and temperature conditions. The Control-Disk
)SLIM LINE) MONOFLANGE VALVES
)SLIM LINE) MONOFLANGE VALVES OVERVIEW The ASTAVA monoflange range is designed to seamlessly connect process piping to instrumentation. By offering a primary isolate bonnet, our line of monoflanges are
Instrument Valves and Manifolds
Instrument Valves and Manifolds Needle Valves Instrument Valve Orifice Block Valves Gauge Block Valves Block & Bleed Valves Integral Block & Bleed Valves Two Valve Manifolds Three Valve Manifolds Five
S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
Installation, Operation and Maintenance Instructions
Installation, Operation and Maintenance Instructions MODEL 5520 June 2002 1.0 GENERAL... 2 Model Number Information... 2 Features... 3 Specifications... 4 Table 1A. Flow Coefficients (C V ), Modified Percent
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (open yoke) and Model 5450 (closecoupled) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry.
BULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc.
BULLETIN 13.01-01 August 2009 PERMASEAL ISO 9001:2008 Certified QMS SMG Valves A Unit of Southern Manufacturing Group, Inc. Design and Construction Permaseal Plug Valves are designed for on-off and diverting
.187" Orifice PART NUMBER DESCRIPTION BONNET MATERIAL SEAT STEM SEAL
Options Bonnet Lock Plate Anti-Tamper Bonnet The Bonnet Lock Plate provides a more positive bonnet-locking device than the standard roll pin. The Anti-Tamper Bonnet Handle allows the bonnet stem to be
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW Neles BW series metal seated high performance butterfly valve with one piece body design, for both control and tight shut-off applications. Multiple
Products for the Oil & Gas Industry
Products for the Oil & Gas Industry BuTech a leading brand of high pressure valves, tubing, fittings and accessories, takes a proactive stance on the design, development and production of new and existing
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES FORGED BRASS BALL VALVES 2-pc Full Port Forged Brass Ball Valve, Packing Gland Design, 600 WOG/150 WSP, MSS-SP-110 CSA, UL, FM, NSF61 and LP Gass Approved
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
Instrument Manifold Valves
Instrument Manifold Valves eries 5000 Accurate flow measurement is of primary importance in achieving an efficient process system. Autoclave Engineers offers a complete line of needle, gauge and instrument
P3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD
P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and
CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 PRODUCTS INDEX 4
Fluid control division MANIFOLD CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 INDEX 4 ACCESSORIES MOUNTING BRACKETS 35 OVAL FLANGES 35 BLEED 35 CONDENSING POTS 36 SYPHONS 36 AIR FEED HEADERS
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (Figure ) and Model 5450 (Figure 2) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These
Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.
DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com
VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed
VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed Catalog No. VM-3 July 2015 VMD Series Direct Mount Manifolds EN 61518: IEC 61518 standard is
Hex Monoweld Valves. Built Hex tough for a lifetime of use. See how inside... www. hexvalve.com
Hex Monoweld Valves Built Hex tough for a lifetime of use. See how inside... HEXVALVE A ivision of Richards ndustries 370 Wasson Road Cincinnati, OH 45209 toll free. 800.543.73 local. 53.533.5600 fax.
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
Engineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
Introduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
Needle Valves B
Subsea Needle Valves Description Detail MAWP Orifice CV Barrior Body Stem O-Ring Connection Actuator Length Width Height Hydrostatic Test Pressure Max Torque on Stem B-4957-01 Sub-Sea Needle Valve -way
Index. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
INSTRUMENTATION - valves
Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear
Medium and High Pressure Product Presentation
Medium and High Pressure Product Presentation www.fitokgroup.com 2016 1 Contents 1. Applications 2. Medium and High Pressure Fittings 3. Tubing 4. Medium and High Pressure Valves 5. Filters 6. Quick Couplings
Installation & Maintenance Manual SPRING ENGAGED FRICTION CLUTCHES THROUGH SHAFT MOUNT - BALL BEARING PILOT REGULAR DUTY
Installation & Maintenance Manual SPRING ENGAGED FRICTION CLUTCHES THROUGH SHAFT MOUNT - BALL BEARING PILOT REGULAR DUTY Catalog Products: E3A2R-STH E4A2R-STH E5A2R-STH E6A2G-STH And non-catalog variations
Hydraulic Valves Needle Valves
Table of Contents 1 Hydraulic Valves Needle Valves TMN Series FFG 2000 Series FFA 2000 Series 2-3 4-5 6-7 Check Valves C Series 8-9 Flow Controls TMF Series 10-11 Low Pressure Ball Valve S95 NPT Series
SCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
SPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
DBOY Series Pneumatic Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
LB-04 HAMER LINE BLIND VALVES
LB-04 HAMER LINE BLIND VALVES INTRODUCTION AND TABLE OF CONTENTS Line Blinding: An Introduction Line blinding is the use of a solid flat plate to obtain absolute shutoff of flow. Whether used with liquids,
Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
MERCER VALVE SERIES Threaded THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 SERIES Threaded MERCER VALVE THINK...MERCER FIRST 9100 Series Threaded Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the
Oil and Gas Products Pressures to 30,000 psi
Oil and Gas Products MAXIMATOR has been designing and manufacturing specialty products to the high pressure market for over thirty years and has a worldwide reputation for quality and reliability. Oil
Twist & Dry. Twist & Dry Component System SPECIAL PURPOSE. Same day shipping for wear parts! Tungsten Carbide Options
Twist & Dry TO DER: specify pipe size, connection type, 108 Twist & Dry Component System The Twist & Dry series of nozzles was designed and developed for the spray drying industry, with the dryer operator
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
Specialty Valves SPECIAL SERVICE
Specialty Valves SPECIAL SERVICE SPECIAL SERVICE FLUOROSEAL PLUG VALVES Whether you are looking for a valve to suit a specific application, or want to customize a standard FluoroSeal Plug Valve, you have
FORGED HIGH PRESSURE BONNETLESS. ASME CLASSES: Sizes: 1 2 4" ( mm) U.S. Patent # Patented Easy Maintenance!
FORGED HIGH PRESSURE BONNETLESS ASME CLASSES: 1690 4500 Sizes: 1 2 4" (15 100 mm) U.S. Patent # 4356832 Patented Easy Maintenance! PROFILE Velan is one of the world's leading manufacturers of industrial
Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation. Motion & Flow Control Products, Inc
Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our
Oilfield Service and Distribution Products
Oilfield Hammer Unions Hammer Seal Swivel Joints Industrial Unions Non-Freeze Tank Valves Seal-O-Grip Oilfield Service and Distribution Products Issue Date 10/01/2009 www.kempervalve.com Sales: 800-231-2724
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS LARGE BORE INTELLIMOUNT SYSTEM
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Stabilized Connector (Futbol) System, The next generation of manifold systems Product overview The Large Bore IntelliMount direct mount manifold
P3M3H, P6M3H 3-VALVE HARD SEAT MANIFOLD
3-VALVE MANIFOLD 3/16 and 3/8 Bore 3-valve Manifold The 3-valve hard seat manifold designed for instrument calibration incorporates two shut-off valves and an equalizing valve in a single body. The manifold