Micro-D Metal Shell -.050" Contact Spacing
|
|
- Isaac Casey
- 5 years ago
- Views:
Transcription
1 Micro Metal Shell.050" ontact Spacing Specifications connectors are used in applications requiring highly reliable, extremely small, lightweight connectors with higher density contact configurations than available in traditional rectangular connectors. They are available in 8 shell sizes accommodating from 9 to 00 contacts, and special arrangements of power and coaxial contacts. These connectors are designed to meet the rapidly increasing demands for an environmental, high performance, rugged, moisturesealed microminiature connector. This connector employs size 4 MIROPIN TM /MIROSOKT TM contacts on.050 (.7) centers in a contact density identical to the standard MIRO connector series, but with these additional features: luminum shells to provide greater strength, prevent chipping, cracking or breaking, offer electromagnetic (MI) and RI shielding. Silicone elastomer compression interfacial seal to provide a moisture and humidity seal between each contact and between contacts and shell. STNR MTRILS N INISHS MHNIL TURS Shell 606T6 luminum alloy per oupling riction/jackscrews QQ00/8, yellow chromate/ Polarization Keystoneshaped shells cadmium, Type II, lass over electroless nickel per S ontact Spacing.050 (.7) MS6074, lass 4. enters Insulator Liquid rystal Polymer per MILM459, Type LP0 (900) lass filled diallyl phthalate per MILM4, Type S (7* and 4*4) Shell Styles No. of ontacts Plug and receptacle 9 thru 00 signal; 5 signal/ coaxial; 5 signal/ power; Polyphenylene sulfide per signal/5 coaxial; MILM459, Type ST40 (6*5) signal/5 power; 0 signal/0 coaxial; Polyester per MILM459, Type 0 signal/0 power; PT0 (0*0) 0 signal/4 coaxial; ontacts Mounting Hardware opper alloy, gold plate 00 Series stainless steel, passivate oaxial able 0 signal/4 power R 78/U Kit, Jackpost () items 00 Series stainless steel, passivate Wire Size #4 thru # W Washer Standard poxy 400 Series stainless stell, passivate Hysol 45/H56, color black or Hysol 498/H56, color green ontact Termination Multiple indent crimp Performance ata The table below summarizes the results of key tests performed in accordance with MILST44, where applicable. ata is applicable to standard connectors with standard termination. Variations may affect this data, so please consult customer service for further information on your requirements. Test ielectric Withstanding Method 00: Voltage 600 V at sea level 50 V at 70,00' altitude Insulation Resistance Method 00 Method riteria of cceptance Thermal Shock Method 00. ondition : 55 to +5 Physical Shock Method 004, ondition : 50 's, axes, 6 millisecond duration sawtooth pulse Vibration Method 005, ondition IV: 0 's, 0,000 Hz. hrs urability 500 cycles of mating and unmating, 500 PH max. Moisture Resistance Method 00, Type II, omit steps 7a & 7b Salt Spray Method 00, ondition : 48 hours ontact Resistance Method 00, ondition : (MILST0) t amps t milliamp ontact Retention Per MILTL85 No breakdown No breakdown 5,000 megohms minimum No physical damage No physical damage No loss of continuity > µsec No physical damage No loss of continuity > µsec No mechanical or electrical defects Insulation resistance > 00 megohms Shall be capable of mating and unmating, and meet contact resistance requirements 8 milliohms maximum 0 milliohms maximum 5 lb. minimum axial load 7
2 Micro Metal Shell.050" ontact Spacing How to Order or MILTL85 ordering information see pages 6 and 7 RoHS OMPLIN SRIS ONTT RRNMNTS ONTT TYP TRMINTION TYP TRMINTION O HRWR SHLL INISH MO OS R 5 P H 00 P XXX SRIS : (Size 900) Liquid rystal Polymer (LP) : (ombo Layout) iallyl Phthalate (P) ONTT TYP P Pin S Socket TRMINTION TYP H Harnessinsulated wire. L Soliduninsulated wire. S Solder pot to accept #6 W harness wire. (Not available with power contact arrangements.) HRWR M Military specification hardware, see page for military hardware codes. P Jackpost K Jackscrewstandard profile L Jackscrewlow profile loat mount No hardware standard.09 (.) dia. hole for sizes 95;.0 (.05) dia. hole for size (.8) dia. mounting holes for sizes 95;.66 (4.) dia. hole for size (.75) dia. hole for size 00 (Per MILTL85) TRMINTION O* (H) 00 8",7/4 strand,#6 W, MILW6878/4, Type Teflon, yellow. (H) 00 8", 7/4 strand, #6 W, MILW6878/4, Type Teflon, color coded to MILST68 System I. ONTT RRNMNTS (standard) 65, 00, 7, 44 (coaxial) or combination of (L) /" uninsulated solid #5 6P5, 0P0, 7P, 4P4 (power) } coax and power W gold plated copper. (L) " uninsulated solid #5 W gold plated copper. SHLL INISH MO OS No Number (Standard cadmium/yellow chromate over nickel 74 lectroless nickel 7 old over nickel 4 Irridite/alodine 0 lack anodize *See page 79 and 8 for additional Termination codes. 8
3 Micro Metal Shell.050" ontact Spacing OTS or Non MilSpec or ommercial or Industrial Standard Wire Termination odes ontact rrangements annon Modification ode (Not MS) The following termination codes are listed for your information. or additional codes please refer to ppendix on page 79 and 8. ll wire lengths are minimum. Harness Type (H) Solid Uninsulated Type (L) #6 W per MILW6878/4, 7/4 strand, type Teflon, stranded. #5 W gold plated copper Length ll Yellow olor oded* Termination ode Length (76.) 6 (5.4) 8 (0.) 0 (54.0) (04.8) 8 (457.) 0 (508.0) 4 (609.6) 0 (76.0) 6 (94.4) 48 (9.) 7 (88.8) 0 (048.0) * avity # black H00 H09 H06 H09 H08 H00 H08 H009 H00 H0 H0 H07 H04 H07 H06 H04 H05 H00 H00 H0 H004 H005 H006 H048 H046 H04 L6 L56 L57 L9 L58 L L4 L L7 L6 L6 L0.5 (.8).50 (.8).90 (4.8).50 (6.5).75 (9.5).500 (.70).750 (9.05).000 (5.40).500 (8.0).000 (50.80).500 (6.50).000 (76.0) (ace View of Pin insert Use Reverse Order for Socket Side) Standard.05 (0.64) TYP..050 (.7) TYP (.09) ontacts ontacts ontacts ontacts ontacts ontacts ontacts ontacts ontact identification numbers are for reference only and do not appear on insulator or connector body..0 oaxial.0 (8.).74 (8.4).460 (.68) Size 5 Shell Micro contact 5 oax or 5 Power Size 5 Shell 5 Micro contact oax or Power 4 5 Size 5 Shell 0 Micro contacts 4 oax or 4 Power (Not MS).007 (0.8) Size 00 Shell 0 Micro contact 0 oax or 0 Power 9
4 Micro Metal Shell.050" ontact Spacing OTS or Non MilSpec or ommercial or Industrial Shell imensions (onforms to MILTL85) Plug.0 (.79) TWO MT. HOLS.09 ±.00(. ±0.08).84 (7.).46 (0.57).86 (4.7).09 (.6) R..00 (5.08) Solder Pot Receptacle.0 (.79) TWO MT. HOLS.09 ±.00(. ±0.08).96 (7.5).49 (0.09).09 (.6) R..00 (5.08).98 (5.0) Solder Pot Receptacle (00 only) TWO MT. HOLS.0 ±.00(.05 ±0.08).49 (0.90).94 (0.0).98 (5.0).09 (.6) R. Pigtail termination.96 (7.5) Part Number y Shell Size 9P* 9S* 5P* 5S* P* P* 5P* 5S* P* S* 7P* 7S* 5P* 5S* 00P* 00S*.785 (9.94).785 (9.94).95 (.75).95 (.75).085 (7.56).085 (7.56).85 (0.0).85 (0.0).5 (.9).5 (.9).485 (7.7).485 (7.7).45 (6.45).45 (6.45).70 (55.).70 (55.).4 (8.48).40 (0.).484 (.9).55 (.97).64 (6.0).70 (7.8).74 (8.64).80 (0.7).884 (.45).95 (4.8).04 (6.6).0 (7.99).984 (4.99).05 (6.7).84 (5.5).508 (8.0) *dd lead type and length; see How To Order. +_.005 (0.).400 (0.6).400 (0.6).550 (.97).550 (.97).700 (7.78).700 (7.78).800 (0.).800 (0.).950 (4.).950 (4.).00 (7.94).00 (7.94).050 (6.67).050 (6.67).44 (6.6).44 (6.6).0 (7.87).0 (7.87).60 (9.4).60 (9.4).5 (8.9).5 (8.9).94 (0.0).94 (0.0).565 (4.5).565 (4.5).75 (8.6).75 (8.6).865 (.97).865 (.97).965 (4.5).965 (4.5).5 (8.).5 (8.).65 (.).65 (.).5 (0.86).5 (0.86).800 (45.7).800 (45.7).5 (6.4).5 (6.4).5 (6.4).5 (6.4).5 (6.4).5 (6.4).8 (5.79).96 (7.5).7 (6.88).94 (0.0) ***Weight given is /", uninsulated, solid, #5 W gold plated copper pigtails. verage Weights** oz. (gm.) ±5%.06 (.79).06 (.79).084 (.9).08 (.7).05 (.99).04 (.97).9 (.9).8 (.6).40 (.99).9 (.96).6 (4.59).60 (4.56).9 (5.50).88 (5.5).500 (4.).040 (9.5) Panel Mounting imensions (Sizes 9 00).00 ±.005 (5.08 ±0.).00 ±.005 (7.6 ±0.).95 ±.005 (0.0 ±0.) Plug and Receptacle Rear Mounted Plug and Receptacle ront Mounted Plug ront Mounted Receptacle Rear Mounted 0
5 Micro Metal Shell.050" ontact Spacing Panel utouts NOT: See page for rear panel mounting configuration. Shell Sizes 9 thru 5 TYP. TYP (.54) +0.) R TYP ±.00 (.4±0.05).00 (0.76) TYP ULL R. (TYP.).05 (0.8)R. (TYP) ULL R. (TYP.) 6 /7 TYP igure ront Mounting igure Rear Mounting ULL R. (TYP.) igure dgeboard Mounting PNL R. Shell Size 00.8 ( ).05 (0.8) R. MX (TYP.) ( ) ( ) +0. (45.85 ) ( ) ( ) 0.00 ULL R. (TYP.) igure ront Mounting.5 (.8 ) ( ) 0.00 ULL R. (TYP.) igure Rear Mounting.450+_.00 (.4+_0.05) ( ) (0.76) TYP. ULL R. (TYP.) ( ) PNL R. igure dgeboard Mounting ( ) 0.00 or 95 Shell Sizes NOTS:. ront panel mounting is the preferred mounting method. ront panel mounting dimensions (figure ) will accommodate either #56 screws or jackpost hardware.. Rear panel mount dimensions (figure ) will accommodate #56 screw hardware only. When mounting the connector with rear panel mount jackpost see the panel cutout dimensions.. dgeboard mounting bracket (figure ) uses # 56 screws. imension.450+/.00 (.4+/ 0.05) locates the receptacle flush with the end of the board. or 00 Shell Size NOTS:. ront mounting is the preferred mounting method. ront panel mounting dimensions (figure ) will accommodate either #440 screws or jackpost hardware.. Rear panel mount dimensions (figure ) will accommodate #440 screw hardware only see the panel cutout dimensions..dgeboard mounting bracket (figure ) uses #4 40 screws. imension.450+/.00 (.4+/ 0.05) locates the receptacle flush with the end of the board. Shell Size utout igure
6 Micro Metal Shell.050" ontact Spacing Mounting Hardware Views (for sizes 95) This hardware supplied unassembled. LOK SRW RTININ LIP.408 (0.6).8 (4.6).688 (7.48) ONNTOR SHOWN OR R. ONLY MTIN #56 UN PNL R..500 (.7) Screw Lock ssembly USHIN. (5.89).09 (.6) ROMMN PNL THIKNSS #56 UN Jackpost (P) Screw Lock ssembly* *NOT Torque value is.5 in/lbs max..05 (.) TYP. 90 ngle Mounting racket.096 ±.005 (.44 ± 0.)I..70 (4.).78 ±.005 (4.5 ± 0.) #56 UN TH.60 (6.60) 90 ngle Mounting racket +/.005 (±0.) escription Screw Lock ssembly Jackpost kit Part Number N/ N/ Mounting racket 90 for 9 thru 7 Shell Sizes Mounting racket 90 for 5 Shell Size (.7).69 (4.9) NOTS: Screw lock assembly ( ) can be used for front mounting only. Jackpost kit ( ) consists of two assmblies, shipped unassmbled..50 (8.89) Jackpost ushing (for rear panel mountingfor sizes 95).70 (4.) HX IS.5 (.4)/.5 (.9) ROSS LTS #56 UN TH MTIN.6 (.0).5 (.8) I. TYP.05 (.67).00 (.54) R TYP. 7 6 TYP.500 (.7).480 (.9) #56 UN TH Panel Thickness / (.4).087 (.) /6 (.6).056 (.4) /64 (.).04 (.07) / (0.8).05 (0.64) * kit consists of jackpost, nuts, washers. Jackpost diameter within the "" dimension is.4/.0 (.5/.05). (0.).000 (0.00) Jackpost Kit Number* Plug and Receptacle imensions Shell Size (0.0).000 (0.00).40 (0.9).55 (4.00).70 (7.8).80 (0.4).95 (4.6).0 (7.97).05 (6.70) (0.0).000 (0.00).5 (6.40).5 (6.40).5 (6.40).5 (6.40).5 (6.40).5 (6.40).95 (7.49) +_.005 (0.).565 (4.5).75 (8.6).865 (.97).965 (4.5).5 (8.4).65 (.).5 (0.86)
7 Micro Metal Shell.050" ontact Spacing Mounting Hardware Views (sizes 95) This hardware is factory installed..04 ±.004 (0.6 ± 0.0) LLOWL IMTRL LOT.00 (0.5) LLOWL XIL LOT.50 ±.00 (.8 ±.076) MTIN ONNTOR SHOWN OR R. ONLY.490 (.45) MX.75 (8.67) ONNTOR SHOWN OR R ONLY HX H.050 (.7) ROSS LTS.050 (.7) P (R).55 (.94) MX.09 (.6) R..090 ±.005 (.9 ± 0.08)I loat Mount ().0 ±.00 (0.79 ± 0.08) MTIN #56 UN PRT HS.040 (.0) MX XIL LOT Jackscrew (K) Standard Profile MTIN PRT HS.040 (.0) XIL LOT #56 UN Jackscrew (L) Low Profile Shown here is a cutaway view of the float mount for the connector. The basic shell dimensions are the same for the float mount and the screw mounting hole configurations. View shown is for standard float mount front panel mounting. Reverse mounting is available on request. * NOT: Torque values are as follows: Low Profile Jackscrew (L).5 inlbs Standard Jackscrew (K).5 inlbs Mounting Hardware to Military Specification (for sizes 9 00) per MILTL85/5 This hardware supplied in kits unassembled ( pieces of each item). #56 UN THR TYP. PLU (R. WITH.09 (.4) I. MOUNTIN HOLS.06 (.57) HX. (R.) #56 UN THR TYP. PLU (R.) WITH.09 (.4) I. MOUNTIN HOLS.6 (9.7).90 (9.9) SIZ 00 ONLY.00 (0.5) TH'K (R.).00 (0.5) TH'K (R.) igure. Jackscrew Low profile Slotted Head Size 95 Size 00* POTTIN WLL (R.) llen head Optional Head onfiguration Plug and Receptacle Low and High Profile Size 95 Size 00* (same dimensions).868 (.05).90 (.9) POTTIN WLL (R.) igure. Jackscrew High Profile Slotted Head Size 95 Size 00*.5 (.8) HX..87 (4.75) HX. #56 UN THR #440 UN THR LOKWSHR RTININ NUT.54 (.9) HX..87 (4.75) HX..06 ±.00 (.57 ± 0.5) SIZ 00 SM igure. Jackpost ssembly Size 95 Size 00*.90/.85(4.8/4.70).85/.75(4.70/4.44).475 ±.05 (.06 ± 0.64) SIZ 00 SM escription To order hardware kits separately, order either by M85/5** or by 0950XXXX. Size 95 Mod ode Part Number Slotted Head Jackscrew ssy Low Profile (igure ) M Slotted Head Jackscrew ssy Low Profile (igure ) M llen Head Jackscrew ssy Low Profile (igure ) M llen Head Jackscrew ssy High Profile (igure ) M Jackpost ssy (igure ) M Size 00* * * Mod ode Part Number * * M M M M M *Size 00 requires size mounting holes for MilSpec hardware Note: Torque values as follows: Size inlbs Size inlbs
8 Micro Metal Shell.050" ontact Spacing Mounting Hardware Views (for size 00) This hardware supplied unassembled.. ±.005 (. ± 0.) I. #440 UN TH #440 UN TH #4 LOK WSHR PNL MY US WITH.09 (.6) MX THIK PNL ( ) (.70).95 (0.0) MTIN SI #440 UN NOTHIN OR ML TH 90 ngle Mounting racket Jackpost (P).5 ±.005 (5.97 ± 0.).064 ±.00 (.6 ± 0.5) TYP. Note: Size 00 requires.0 dia () mounting hole when using ommercial (P) jackpost kits. 90 ngle Mounting racket escription Jackpost kit Mounting racket 90 Part Number ±.005 (0.) N/ (4.85).70 (9.40) This hardware is factory installed..04 ±.004 (0.6 ± 0.0) LLOWL IMTRL LOT.00 (0.5) LLOWL XIL LOT.74 ±.005 (4.4 ±.0) MTIN ONNTOR SHOWN OR R. ONLY.75 (8.67) HX. SOKT H..078 (.98) ROSS LTS.050 (.7) MIN. PTH MX.09 (.6) R..6 ±.00 (.9 ±.05) I loat Mount () Std..0 ±.00 (0.79 ± 0.08) MTIN #440 UN TH PRT HS.040 (.0) MX XIL LOT Jackscrew (K) Standard MTIN SI.55 (.94).040 (.0) XIL LOT #440 UN TH Jackscrew (L) (Low Profile) *NOT: Torque values are as follows: Low Profile Jackscrew (L)4.0 inlbs Standard Profile Jackscrew (K)4.0 inlbs Jackpost ushing (for Rear Panel Mounting) NIN /6" HX. LOKIN POST #440 UN imensions for Rear Panel Mounting.800 ±.005 (45.7 ± 0.) Panel Thickness / (.4) /6 (.6) / (0.8) /64 (.) (0.).000 (0.00).087 (.).058 (.4).05 (0.64).04 (.07) Jackpost Kit Number* RPTL SHOWN OR R. ONLY #440 THR RTININ NUT.70 (4.).500 (.70).5 ( R ) ( ) ( ) (4.09).59 (4.04) I. * jackposts, nuts, washers Torque value for size 00 Note: Size 00 requires mounting hole shell size when using rear panel mount jackposts 4
9 Micro Metal Shell.050" ontact Spacing onnector Saver Save wear and tear on your equipment and systems connectors by using the "onnector Saver". The multimatings and unmatings experienced by most connectors during testing and final check out can be eliminated. Simply mate the "onnectors Saver" to your unit and use the opposite side for your testing interface...less wear, less tear, less chance of damage. It is available in all eight standard layouts. Mating hardware is available and can be ordered either separately or included with the connector saver..040 (.0) LLOWL XIL LOT #56 UN TH (95) (TYP.).790 (0.07).5 (8.00) JKSRW/JKPOST USHIN (OR RRN ONLY S ORRIN INORMTION LOW.) MIROPIN MIROSOKT ONNTOR RPT ONNTOR, PLU KPOTTIN, POXY INTRIL SL.090 (.9) R. (TYP.).900 (.86) R. (TYP.) Size 9 Shown RIN (TYP.) Size lectroless Nickel (74) Plated admium over Nickel (0) Plated With Hardware W/O Hardware With Hardware W/O Hardware *Hardware Kits ** ** ** ** ** ** ** *** ±.005 (0.).785 (9.94).95 (.75).085 (7.56).85 (0.0).5 (.9).485 (7.7).45 (6.45).70 (55.).565 (4.5).75 (8.6).865 (.97).965 (4.5).5 (8.).65 (.).5 (0.86).800 (45.7).5 (8.9).94 (0.0) * Kit contains jackpost/jackscrew bushings and Rings. ** Size 95#56 UN Thread *** Size 00#440 UN Thread 5
10 Micro Metal Shell.050" ontact Spacing MILTL85 How to Order MILTL85 Part Number Nomenclature Slash Sheets 9 M85/ 0 H00 * * * * * * SRIS M MV Metal Shell, Liquid rystal Polymer (LP) iallyl Phthalate Insulator Polyester Insulator MIL85 SLSH SHT Plug, onnector, Solderpot Receptacle, onnector, Solderpot Plug, onnector, rimp Type Receptacle, onnector, rimp Type Hardware Only 7 Plug, onnector, Solderpot Receptacle, onnector, Solderpot Plug, onnector, rimp Type Receptacle, onnector, rimp Type Metal Shell Plastic 5 INSRT RRNMNT H MTL SHLL 9 ontact 5 ontact ontact 5 ontact ontact 7 ontact 5 ontact 00 ontact PLSTI 9 ontact 5 ontact ontact 5 ontact ontact 7 ontact 5 ontact 5 NOTS: or every Mil Spec Part Number, ITT has one corresponding part number shown an example Tolerance on wire lengths: 8", 6" and 7" long +.00"/0.00".5" and.00" +.00"/.000" 4 or space application, connector shell finish must be "74" and wire must be per MILW759/6. ny deviations to these P/N's will result in assignment of a special P/N, consult factory. WIR TYP No Number or Solderpot " 6" 8" 5 Size 00 not available in / 06 through / 09. (Plastic shell) 6 olor coding in accordance with MILST68, System, no parenthesis. See page 8 for color code chart. SHLL INISH 7 or mounting hardware to Military Specification (sizes 9 to 00) see page. N 74 lectroless Nickel ".5".0".5".0" 8" 6" 8" 6" 7" 7" 7" 7" long, #6 W per MILW759/69 (all white) long, #6 W per MILW759/69 (all white) long, #6 W per MILW759/6 olor oded per MILST68, System, 0 colors repeating long, #6 W per MILW759/6 olor oded per MILST68, System, 0 colors repeating long. #5 W, type S per QQW4, old Plated long, #5 W, type S per QQW4, old Plated long, #5 W, type S per QQWW4, Tin Plated long, #5 W, type S per QQW4, Tin Plated long, #6 W per MILW759/69 (all white) long, #6 W per MILW759/69 (all white) long, #6 W per MILW759/6 olor oded per MILST68, System, 0 colors repeating long, #6 W per MILW759/6 olor oded per MILST68, System, 0 colors repeating long, #6 W per MILW759/69 (all white) long, #6 W per MILW759/6 olor oded per MILST68, System, 0 colors repeating long, #6 W per MILW759/69 (all white) long, #6 W per MILW759/6 olor oded per MILST68, System, 0 colors repeating No number for plastic type connector for admium/yellow chromate over nickel
11 Micro Metal Shell.050" ontact Spacing MILTL85 How to Order MILTL85 Part Number Nomenclature Slash Sheets 07 M85/ 0 * * * SRIS onnector, lectrical, Rectangular Microminiature, Polarized Shell P oard Mounting MIL85 SLSH SHT 0 onnector, Plug, ondensed oard Right ngle (R), Sizes 9 7 onnector, Plug, R, Size 5 onnector, Plug, R, Size 00 onnector, Receptacle, R, Sizes onnector, Receptacle, R Size 5 5 onnector, Receptacle, R, Size 00 6 onnector, Plug, oard Right ngle (R), Sizes onnector, Plug, R, Size 5 8 onnector, Plug, R, Size 00 9 onnector, Receptacle, R, Sizes onnector, Receptacle, R Size 5 onnector, Receptacle, R Size 00 onnector, Plug, oard Straight (S), Sizes 9 7 onnector, Plug, S, Size 5 4 onnector, Plug, S, Size 00 5 onnector, Receptacle, S, Sizes onnector, Receptacle, S, Size 5 7 onnector, Receptacle, S Size 00 INSRT RRNMNT H MTL SHLL 9 ontact 5 ontact ontact 5 ontact ontact 7 ontact 5 ontact 00 ontact WIR TYP No Number or Solderpot NOTS: 0.09" long, #4 W solid copper wire per QQW4, Type S, solder dipped or every Mil Spec Part Number, ITT has one 0.40" long, #4 W solid copper wire per QQW4, Type S, solder dipped corresponding part number 0.7" long, #4 W solid copper wire per QQW4, Type S, solder dipped Tolerance on wire lengths ±.05 or space application, connector shell finish must be "N". SHLL INISH 4 ny deviations to these P/N's will result in assignment No letter for plastic type connector of a special P/N, consult customer service. admium / Yellow chromate over nickel N lectroless Nickel HRWR N No jackpost P Jackpost (permanently attached) T Threaded insert 7
How to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationMicrominiature. Micro Edgeboard -.050" Contact Spacing MEB. Specifications. How to Order.
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro dgeboard -.050" ontact Spacing M The Micro dgeboard (M) connector series provides a combination of high density and high reliability for applications in airborne
More informationMDM MDM MIL-DTL STYLE MIL-DTL STYLE. Applications. Features
MDM Applications Features MIL-DTL-83513 STYLE As the result of the miniaturization of today s sophisticated electronics where more and more electronics are being packed into smaller and lighter electronic
More informationMICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction
MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Panel Series 79 Micro-rimp Section : Panel onnectors, rimp Termination Panel Plugs With Socket ontacts, rimp Termination, 790-027S 790-027S connectors are designed for rear-panel mounting and are supplied
More informationMicro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors
Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More informationThe Centi Line -.075" Contact Spacing
The enti Line -.075" ontact Spacing The annon enti connectors are especially suitable for commercial applications such as computers, instrumentation, communications and audio equipment. They are available
More informationMicro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector
Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More information17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
More informationMicro-D TwistPin Connectors and Accessories Product Selection Guide
Micro-D TwistPin onnectors and ccessories Product Selection Guide MIL-DTL-833 onnectors Section Glenair OTS Micro-D onnectors Section Micro-D Printed ircuit oard onnectors Section Micro-D ackshells and
More informationSeries 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing
More informationMIL Class M Series D*M D*MA connectors and crimp contacts
eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic
More informationMicro-D Printed Circuit Board Connectors
PB Printed ircuit Board onnectors ondensed Board Straight BS.075 Inch Spacing Save Space On Your ircuit Board These connectors feature.075 inch row spacing. The board footprint is reduced to match the
More informationVG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
More informationMIL-DTL Series I, II, III Connectors
LTL38 Series,, onnects Perfmance and aterial Specifications TRLS FSHS luminum Receptacle Grounded Plug luminum alloy luminum alloy* nsulat High grade plastic High grade plastic ontacts opper alloy, gold
More informationDMS Series. Commercial Version MIL-C-5015 Compatible DMS FEATURE
MS Series ommercial ersion MI--5015 ompatible MS MS series connectors are intermateable and intermountable with MI--5015 connectors. The MS series offers: ard dielectric interial (diallyl phthalate) Zinc
More informationButt Contact Pushbutton Switches. Series 30 and 46 Snap-in Panel Mount
utt ontact Series 30 and 46 Snap-in Panel Mount TURS Sleek lack Matte ezel onvenient Snap-In ront Mount hoice of 6 utton olors SPST, SPT or PT ircuitry lternate ction, Positive eel and Overtravel Versions
More informationca_b1-b66.qxd:layout 1 2/9/11 7:58 PM Page 1 Mini Circular
Microminiatuare ircular -.050" ontact pacing MIO- MIO- microminiature circular connectors are rugged yet lightweight - and meet or exceed the applicable requirements of MI- T-8353. pplications include
More informationBRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More information6LGH High Voltage Connectors
LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387
More informationDT Family. DT Family Overview DTM SERIES OVERVIEW DT SERIES OVERVIEW DTP SERIES OVERVIEW
T amily Overview UTSH T, TM, and TP series environmentally sealed connectors are designed for cable to cable and cable to board applications. The T connectors are used in harsh environment applications
More informationElectrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
More informationREVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS
RVRS YONT SINGL-POL ONNTORS HIGH-URRNT, LOW-VOLTG POWR ONNTORS OR RUGGIZ MILITRY N INUSTRIL PPLITIONS RURY 2019 High Voltage lectrical Power istribution rom 0 to 60 in 3.9 Seconds High voltage electrical
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationMIL-DTL Micro-D Connector
Specication MIL-TL-83513 Micro- onnector MIL-TL-83513 Micro- onnector R04J Series rimp ontact Type nvironment temperature: ~ Vibration: 10z~2000z, 196m/s Random vibration: Power spectrum density 0.4 z
More informationA B C D E F G H J K L M N
icro- icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated
More informationConnection Systems. Bulls-Eye Subminiature Circular Connectors
Connection Systems Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Hit the target every time with our high density connectors that provide high
More informationMIL-DTL Micro-D. MD Series CONNECTING YOUR ENGINEERING PASSION MILITARY STYLE CONNECTORS
CONNECTING YOUR ENGINEERING PASSION Series MIL-DTL-353 Micro-D MILITARY STYLE CONNECTORS MILITARY & DEFENSE EDITION Lightweight, High-Density Connectors Pre-Assembled Wire Harnesses PCB Angled & Straight
More informationFeatures and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
80 Mighty Mouse Technical Reference Reference SRIPTION RQUIRMNT PROUR TRI ontact resistance S S39029 Table V Max Wire Test Voltage Size urrent rop 12 23 42 14 17 40 16 13 49 20 7.5 55 22 5 73 24 3 45 26
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationS Rear Panel Float Mount Plugs
How To Order Series 79 HOW TO ORDR Sample Part Number H-66 M N Part Number Rear Panel Float Mount Plugs SOCKT CONTCTS WITH CRIMP TRMINTION connectors are equipped with rear-panel float mounting assemblies
More informationKDB / VG Series
/ V 9523 Series ontents Introduction........................... 2 onnector design...................... 2 Technical data......................... 3 ounting dimensions.................. 5 ow to order..........................
More informationHow to Order CONTACT TYPE FLANGE TYPE MOUNTING CONTACT TERMINATION
hermetically sealed connectors are designed to meet environmental conditions of extreme pressure differential. These connectors are part of the ITT Cannon D Subminiature series and are qualified to MIL-C-24308
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationPlug MIL-DTL Type Fiber Optic Connector For use with MIL-T-29504/4 & /5 Termini
180-060-06 Plug MIL-TL-38999 Type iber Optic onnector or use with MIL-T-29504/4 & /5 Termini MIL-TL-38999 OW TO ORR: 180-060 XW 06--8 P N asic Number inish Symbol (Table II) onnector Style Alternate Key
More informationWall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31.
L-L-38 eries,,, V ilter onnectors hip-on-lex all ount Receptacle: able of ontents L-L-38 eries K0 R 1 R 2 RE Z X. V RE 4 LE 4 LE LUE (E RER RELEE O REEO YE) RE (ULLY E OR ).0 X EL KE (including mounting
More informationCONTENTS HMK SERIES X.100 CONNECTORS
HMK SERIES CONTENTS HMK SERIES -.100 X.100 CONNECTORS PAGE 5 Introduction 6 Specifications 7 Ordering Chart - 2 & 3 Row 2 ROW UNINTERRUPTED (17-65 CONTACTS) 8 FC, FD, FS, FW, SC, SD, SS, SW- Socket, Straight
More informationFILTER D-SUB. connectors
FILTER -SUB connectors table of contents MIL-TL-24308...3 Layouts...3 -Subminiature onnectors...4 How to order...5 MIL-TL-83513...6 onnectors and Layouts...7 How to order...8 OMBO -SUB MINITURE... 9 High
More informationEnvironmental/Hermetic Connectors. MIL-DTL Series III and IV. Industry-Standard Military / Aerospace Harsh-Environment
nvironmental/ermetic onnectors I-T-38999 Series III and IV Industry-Standard ilitary / erospace arsh-nvironment OTOR 2017 RTI N NVIRONNT I-T-38999 Series III and IV The industry standard mil/ aero connector
More informationP Panel Mount Receptacles PIN CONTACTS WITH CRIMP TERMINATION
Crimp Terminated Receptacles, How To Order HOW TO ORDR Sample Part Number L-6P6 MT G Part Number Receptacles PIN CONTACTS WITH CRIMP TRMINATION connectors are designed for rear-panel mounting and are supplied
More informationMIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
More informationContact resistance : environmental class hermetic class size 20 1 mω 7 mω size mω 3.8 mω size mω 2.4 mω
8525 eries pplications or all general purposes in civil aeronautical applications tandards N 934 H 32 NL 5413 N 3646 M T1 list LN 2954 escription Light weight version of MIL 26482 eries II Intermateable
More informationM300 Connectors Introduction
ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male
More informationMade to order cable assemblies
Think he ll ever break that hold? Nope. He s got him in a ull Nelson. SRIS 80 Made to order cable assemblies Nothing quite says "turnkey" like a factory-terminated and -tested Mighty Mouse ordset. rom
More informationS Straight PCB Panel Mount Plugs
Sample Part umber K-43 M E P B Part umber PCB Panel Mount Plugs socket contacts with STRAIGHT PCB TERMIATIO Lightweight, rugged vertical mount headers feature gold-plated PC tail contacts for thru-hole
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More informationGecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
More informationD-SUB Series. Electrical Max current rating per contact : 7.5 A. Insulation resistance : 5000 MΩ Contact resistance : 10 mω
-SU Series pplications For military and aerospace applications. s MiL- 24308 HE 501 HE 508 HE 507 haracteristics Mechanical Shell : cadmium plated steel Insulator : monothermoset and two parts thermoplastics
More informationRECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES
Rev. C, March, 2016 RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES Connectors with wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification
More informationPCB Single Row Connectors
SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors
More informationMIL-C 26482G Series II
pplications or all general purposes in military applications Standards MIL 2642 Series II QPL approved escription Standard version luminium alloy : olive green, nickel or, black, anodized plating ayonet
More informationMicrominiature Connectors
Microminiature Connectors Product Manager August 2013 The Microminiature Range 3 basic families of small pitch connectors CENTI Line - 0.075" / 1.90mm pitch between contacts 2D double density, CTA strip,
More informationRack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
More informationD*MA Standard Density Crimp Contact Cable Connector
annon rimp, Size 20 *M Standard ensity rimp ontact able onnector or contact cavity arrangements, see pages -44. or panel cutouts, see page -49. ngaging ace Shell Size ayout ual Through Hole loat Mount
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationPART NUMBER BREAKDOWN CP A 70 1 W D H - 10
SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental
More informationMIL-C-5015 Bulkhead Receptacles
I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient
More informationDL Series ZIF connectors
L Series ZIF connectors annon, VM, IW Historical chievement of Technology Leadership efining and hampioning Innovation Showcasing a portfolio of creativity, ITT s ngineered For Life execution embraces
More informationMIL-DTL Series 1 Solder Type PT
MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally
More informationWILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
More information1Rack and Panel Connectors
Rack and Panel Connectors Table of Contents RINC 600 Connectors Introduction............................................................2 Ordering Information.....................................................3
More informationMil-Spec Backshells and Connector Accessories
Mil-Spec ackshells and onnector ccessories U n i t e d S t a t e s U n i t e d K i n g d o m e r m a n y r a n c e N o r d i c I t a l y S p a i n n Important Notice for ll uyers of Military Standard ylindrical
More informationP Straight PCB Panel Mount Receptacle
How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied
More informationGeneral Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
More informationMIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors
MIL-DTL-55302 QPL'D 2 and 3 Row Printed Circuit oard Connectors 17, 29, 33, 41, 53, 62, 65, 72, 80.1, 84, 96, 98, 120, 126, 160 and 160.4 General Specifications Number 17, 29, 33, 41, 53, 62, 65, 72, 80.1,
More informationAmphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments
Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series
More informationAmphenol Amphenol Pcd Terminal Junction Systems
igh Quality Interconnect Products or Military and erospace pplications mphenol mphenol Pcd Terminal unction Systems Terminal unction Systems MIL-T-171 Series I lass MIL-T-171 Series I unction Modules QPL-approved
More informationCannon D-Subminiature Accessories
annon -Subminiature ccessories annon -Subminiature ccessories Selection Guide Locking Hardware Sliding Lock emale Screw Lock Male Screw Lock Retainer Slide Lock Post Spring Latch Plate Spring Latch ackshell
More informationAmphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors
Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-
More informationonlinecomponents.com Yellow chromate over cadmium QQ-P-416 Type II Class 2
High Reliability, Military Subminature, & NonMagnetic/NoOutgas Solder up rimp Printed ircuit (See page 333) (See page 334335) (See page 336338) Performance and Material Specifications MTRILS N INISHS Shell
More informationConnectors Conforming to European Safety Standards
Series RoS ompliant onnectors onforming to European Safety Standards s of January 1995 all industrial machinery, including machine tools, which are exported to Europe must conform with European safety
More informationVG95351 and VG96934 Qualified Connectors VG96934 TEN PIN CONNECTORS AND ACCESSORIES
V95351 and V96934 Qualified onnectors Series onnectors V96934 TN PIN ONNTORS N SSORIS V96934 STYL ONIURTION SRIPTION P STYL able plug with two piece shielded backshell Page 30 STYL lange mount receptacle
More informationLow Mating Force how to order (military types)
how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail
More informationTABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
More informationSection L MIL-DTL Micro-D Connectors
Section MI-DT-353 Micro-D Connectors Micro-D MI-DT-353 product selection guide Glenair s Complete Micro-D Product ine includes all M353 Micro-D connectors. Choose Solder Cup, Pre-Wired or PCB versions.
More informationD X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
More informationAllen Electric Connector Sales, Inc. (AECS, Inc.)
Allen Electric Connector Sales, Inc. (AECS, Inc.) A Woman owned small business since 1996, AECS, Inc. offers military circular electric connectors, connector accessories, custom design connectors, custom
More informationPART NUMBER BREAKDOWN
SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options
More informationHigh POWER. For High Current and High Temperature Environments CONNECTORS
High or High urrent and High Temperature nvironments ONNTORS Table of ontents ontents Table of ontents 2 High Power Series Introduction 3 How to Order 4 lass escriptions, Performance Specifications 5 Socket
More informationQwikConnect. Inside. Connector. Technology For the Vanguard of Innovation. Connector. Reference & Design Guide GLENAIR APRIL 2009 V OLUME 13 NUMBER 2
Qwikonnect LNIR PRIL 00 V OLUM NUMR onnector Technology or the Vanguard of Innovation P Inside onnector Reference & esign uide Qwikonnect Out of This World onnector Performance Multi-contact electrical
More informationMS/Standard DL-Class Pre-Earth type
MS/Standard L-lass Pre-arth type mphenol R mphenol ML--5015 onnectors L Series Pre-earth type L Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying uropean safety
More informationVG95351E7. O-Ring for use with Style B flange mount connector Glenair, Inc. CAGE Code Printed in U.S.A.
Series onnectors V95351 and V96934 Qualified onnectors V95351 and V96934 Qualified Products bout The V Specifications The erman ederal Office of efense Technology and Procurement (W) establishes procurement
More informationKenstan. Volume 5. Knob Line of Locks. Introduction. Cam Locks. Drawer/Door Locks. Snap Bolt Lock. Plunger Lock PL40.
Volume 5 a t a l o g L O K O M P N Y of Locks 2 S V Introduction 1 am Locks 2 3 rawer/oor Locks 4 Snap olt Lock 5 PL40 6 PL45 7 PL50 8 L O K O M P N Y List and ata Sheet Introduction 1 of Locks Standard
More informationIntroduction to hermetic connectors Rear panel mounting guide Hermetic connectors
Introduction to hermetic connectors... 164 Rear panel mounting guide... 165 Hermetic connectors... 166 www.axon-cable.com 2002, XON CBL SS - XON D-LIN - RLSD OCTOBR 2016/D 163 Custom designed solutions
More informationDATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
More informationCircular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories
ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors
More informationGlenair Environmental and Hermetic MIL-DTL Type Bulkhead Feed-Thrus
lenair Environmental and Hermetic MIL-DTL-38999 Type ulkhead eed-thrus SETION E TALE O ONTENTS LENAIR MIL-DTL-38999 TYPE ULKHEAD EED-THRUS: MIL-DTL-38999 Type ulkhead eed-thru Product eatures...e-1 231-103-H7
More informationITT Cannon KJL Series MIL-DTL Series I Connectors
APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING
More informationAmphenol Heavy Duty Cylindrical Connectors
mphenol Heavy Duty ylindrical onnectors 12-052-9 mphenol mphenol Heavy Duty ylindrical onnectors MIL--22992/Proprietary High urrent apacity Rugged onstruction Safety Serviceability mphenol meets the demands
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationAmphenol 67 and 165 Series Miniaturized Standard Connectors
Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol Table of Contents Page No. Amphenol 67 Series Minni E General Information, Design Characteristics, Customer Options.........................
More informationSeries S127B Potentiometer 1/2" (12.7mm) Square
Series S17 Potentiometer 1/" (1.7mm) Square Features: Stackable - up to modules onductive Plastic or ermet Resistance lement Linear, W or audio Taper Metal Shaft and ushing Description: The Series S17
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More informationIPT SE and IPT Series
IPT S and IPT (MI-T-26482 Serie I) and Tools IPT S and IPT Series and Tools Section 3057- able lamp / 3057- able lamp -2 ; -3 34 and 34- Neoprene Sleeve -4 IPT 3180- and IPT 3180-F Protective Plug overs
More informationMIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
More information