EPP Sheet, 3 mm, 20g/dm³. EPP Sheet, 10 mm, 20g/dm³. 900 mm x 580 mm. 900 mm x 580 mm. EPP Sheet, 6 mm, 20g/dm³. EPP Sheet, 6 mm, 30g/dm³
|
|
- Bernard Strickland
- 6 years ago
- Views:
Transcription
1 EPP Sheet, 6 mm, 20g/dm³ 900 mm x 580 mm EPP Sheet, 6 mm, 30g/dm³ 900 mm x 580 mm Spacer Main Wing Spacer Main Wing EPP 10 mm Spacer Main Wing EPP Sheet, 3 mm, 20g/dm³ 900 mm x 580 mm EPP Sheet, 10 mm, 20g/dm³ 900 mm x 580 mm Spacer Main Wing Glue Area Motor Mount Motor Mount Motor Mount
2 Front -> EPP 3mm 20g/dm³ slight bevelcut inside cut a small slot (1 mm) inside (for obtuse angle) Cutline by using a Sheet of 900 mm x 580 mm Carbon Rod Ø 1,5 mm x 580 mm (top side of wing) Carbon Rod Ø 1,5 mm x 420 mm (top of Spacer) HXT5 00 exits EPP End of 0,5 mm Steel Wire exits EPP 0,4 mm Steel W ire End of exits EPP * Due to weakness of EPP it is necessary to bend up the tail section of the wing like shown in the picture. Without bending you will crash after every looping! Bend up the tail section during glueing the Tail Reinforcer (1,5 mm Carbon rods on top of the Spacer and at the bottom side of the Wing). exits EPP End of Nose Wheel Steering Brass Tube Ø 3 mm x 50 mm Glue Area Motor Mount Slot for (inboard) 55 Gear Mount Made of 2,5 mm plywood Gear Mount Made of 2,5 mm plywood Spacer Main Wing Spacer Main Wing EPP 10 mm Spacer Main Wing Spacer Main Wing Motor Mount Motor Mount Spacer Tail Reinforcer EPP 6 mm Make 2 sharp bevelcut inside sharp bevelcut inside cut a small slot (1 mm) inside EPP 3mm 20g/dm³ cut a wide slot (1,5 mm) inside cut a small slot (1 mm) inside (for obtuse angle) slight bevelcut inside slight bevelcut inside slight bevelcut inside slight bevelcut inside sharp bevelcut inside sharp bevelcut inside cut a small slot (1 mm) inside (for obtuse angle) cut a wide slot (1,5 mm) inside cut a wide slot (1,5 mm) inside sharp bevelcut inside cut a small slot (1 mm) inside (for obtuse angle) EPP 3mm 20g/dm³ slight bevelcut inside cut a very wide slot (2,5 mm) inside cut a very wide slot (2,5 mm) inside slight bevelcut inside Reinforcement Fins made of 6 mm EPP Bevelcut 55 Bevelcut 55 Front view outboard inboard inboard outboard Motor Mount Turnigy T Motor Mount made of 2mm plywood Top Ø 1,6 mm Duct Templates (made of fly screen) 109 mm Top 25 mm Fin Angle Template 55 Landing Gear made of Carbon Rod Ø 2mm Spacer Main Wing Make 2 (mirrored) Neodym 4x2 mm N52 Wing & Fuselage HXT500 Glue Area Spacer Main Wing Nose Wheel Steering Brass Tube Ø 3 mm x 50 mm HXT500 Neodym 4x2 mm N52 Wing 3x2 mm N35 Fuselage HXT500 HXT500 Main Wing Plywood 96,00 Carbon Spar 3 mm x 1 mm x 50 mm (bottom side) Glue Area Spacer Main Wing Glue Area Spacer Main Wing Height: 40 mm EPP 6mm 20g/dm³ CoG for Indoorflying Gear Position Neodym 3x2 mm N35 Wing & Fuselage Make 2 (mirrored) Washer M2 Heat Shrink Carbon spar 3 mm x 1 mm x 150 mm (outboard) Carbon Rod Ø 1 mm x 220 mm (strut) bended at half length Carbon Spar 3 mm x 1 mm x 585 mm (top side) cut a very wide slot (2,5 mm) inside Roberts Indoor F-117 EPP Carbon Spar 3 mm x 1 mm x 176 mm (bottom side) Glue Area Fins Glue Area Reinforcement Fins Glue Area Fins 4-5 mm Glue Area Spacer Tail Reinforcer Tail Reinforcer* Carbon Rod Ø 1,5 mm 455 mm (top of Spacer) Carbon Rod Ø 1,5 mm 500 mm (bottom side of Wing) Neodym 3x2 mm N35 Wing & Fuselage Carbon Spar 3 mm x 1 mm x 815 mm (bottom side) Fins made of EPP 6mm 30g/dm³ Bevelcut 35
3 R1 C1
4 exits EPP End of bon Spar 3 mm x 1 mm x 815 mm (bottom side) Slot for (inboard) Fins made of EPP 6mm 30g/dm³ Carbon spar 3 mm x 1 mm x 150 mm (outboard) Bevelcut 35 R1 C2
5 Carbo R1 C3
6 Nose Wheel Steering Brass Tube Ø 3 mm x 50 mm Fin Angle Template 55 Motor Mount Turnigy T Motor Mount made of 2mm plywood Spacer Main Wing Landing Gear made of Carbon Rod Ø 2mm Ø 1,6 mm Washer M2 Main Wing Plywood 96,00 25 mm 109 mm Heat Shrink R1 C4
7 outboard Duct Templates (made of fly screen) Top inboard Bevelcut 55 Reinforcement Fins made of 6 mm EPP Bevelcut 55 Top inboard outboard Gear Mount Made of 2,5 mm plywood Gear Mount Made of 2,5 mm plywood Front view 55 R1 C5
8 Spacer Main Wing Spacer Main Wing Spacer Main Wing EPP 10 mm Glue Area Motor Mount Spacer Main Wing Motor Mount Motor Mount R1 C8
9 Spar 3 mm x 1 mm x 176 mm side) Glue Area Fins Glue Area Reinforcement Fin Glue Area Fins * Due to weakness of EPP it is necessary to bend up the tail section of the wing like shown in the picture. Without bending you will crash after every looping! Bend up the tail section during glueing the Tail Reinforcer (1,5 mm Carbon rods on top of the Spacer and at the bottom side of the Wing). 4-5 mm Tail Reinforcer* Carbon Rod Ø 1,5 mm 455 mm (top of Carbon Rod Ø 1,5 mm 500 mm (bottom R2 C1
10 ns exits EPP Carbon Rod Ø 1 mm x 220 mm (strut) bended at half length Glue f Spacer) m side of Wing) Glue Area Spacer Tail Reinforcer Neodym 3x2 mm N35 Wing & Fuselage R2 C2
11 par 3 mm x 1 mm x 50 mm ide) e Area Spacer Main Wing Glue Area Heig EPP 6mm 20g/dm³ CoG for Indoorflying Gear Position Neodym 3x2 mm N35 Wing & Fuselage R2 C3
12 sing a Sheet of 900 mm x 580 mm HXT500 HX Glue Area Space a Spacer Main Wing ght: 40 mm HXT500 HXT End of exits EPP Neodym 4x2 mm N52 Wing 3x2 mm N35 Fuselage 0,4 mm Steel Wire End of exits EPP R2 C4
13 T500 er Main Wing Carbon Rod Ø 1,5 mm x 580 mm (top side of wing) Carbon Rod Ø 1,5 mm x 420 mm (top of Spacer) Nose Wheel Steering Brass Tube Ø 3 mm x 50 mm HXT5 Neodym 4x2 mm N52 Wing & Fuselage 0,5 mm Steel Wire R2 C5
14 cut a very wide slot (2,5 mm) inside EPP 3mm 20g/dm³ slight bevelcut inside R2 C6
15 s cut a wide slot (1,5 mm) inside cut a wide slot (1,5 mm) inside cut a small slot (1 mm) inside (for obtuse angle) sharp bevelcut inside R2 C7
16 slig cut a small slot (1 mm) inside (for obtuse angle) slot (1 mm) inside se angle) Spacer Tail Reinfo sharp bevelcut inside R2 C8
17 Roberts Indoor F-117 EPP Front -> cut a very wide slot (2,5 mm) inside EPP 3mm 20g/dm³ Carbon (bottom R3 C1
18 Carbon Spar 3 mm x 1 mm x 585 mm (top side) R3 C2
19 Carbon Sp (bottom si R3 C3
20 Cutline by us R3 C4
21 R3 C5
22 slight bevelcut inside cut a very wide slot (2,5 mm) inside R3 C6
23 cut a small slot (1 mm) inside (for obtuse angle) sharp bevelcut inside R3 C7
24 sharp bevelcut inside slight bevelcut inside slight bevelcut inside cut a small slot (1 mm) inside sharp bevelcut inside cut a wide slot (1,5 mm) inside EPP 3mm 20g/dm³ slight bevelcut inside slight bevelcut inside light bevelcut inside cut a small slo (for obtuse R3 C8 orcer EPP 6 mm Make 2
25 R4 C1
Trainer Assembly Manual
Trainer Assembly Manual www.pilot-rc.com -Pilot Trainer- 1 -Pilot Trainer- 2 -Pilot Trainer- 3 -Preliminary i wing & stab assembly- 1-) Locate both Plywood wing joiners (Large and small one) 2-) Insert
More informationMiG-29 Retract Kit (for the HET-RC Mini Air Retract System)
MiG-29 Retract Kit (for the HET-RC Mini Air Retract System) The MiG-29 Retract Kit was designed to allow the easy installation of the HET-RC mini Air Retract system into the twin EDF MiG-29. We recommend
More informationZODIAC 601 XL. Trim the outboard corner of the front flange of the center spar 6W4-1. Corner should not touch the side of the cabin floor skin 6B10-1.
Trim the outboard corner of the front flange of the center spar 6W4-1. Corner should not touch the side of the cabin floor skin 6B10-1. Tape the side skins to the cabin floor skin (area in front of the
More informationDecathlon 107 USER MANUAL. WINGSPAN: 2700mm LENGTH: 1890mm
Decathlon 107 USER MANUAL WINGSPAN: 2700mm LENGTH: 1890mm Introduction Thank you for purchasing our Deacthlon plane. we strive to achieve a good quality quick build ARF aircraft. It requires the least
More informationAssembly Manual For. Wingspan: 88 in Wing area: sp in Length: 78.8 in Engine: 50CC.
Assembly Manual For Wingspan: 88 in Wing area: 1479.8 sp in Length: 78.8 in Engine: 50CC www.pilot-rc.com INTRODUCTION Thank you for purchasing our new 50 cc model. We strive to bring you the most complete
More informationMonocoupe 90 AF BY LESLIE M. ADAMS
Monocoupe 90 AF BY LESLIE M. ADAMS Tired of contest models? Get away from it all with this swell flying scale version of the latest Monocoupe. Its appearance will satisfy even most exacting scale fiend.
More informationMEMO. No.4341 Specification: Wing Span: 29.1 (740mm) Length: 36.6 (930mm) 2. Warranty
MEMO No.4341 Specification: Wing Span: 29.1 (740mm) Length: 36.6 (930mm) 2 Wing Area: 299 sq.in. (19.29 dm ) Weight: 18.9oz. (536.5g) 2 Wing loading: 0.58 oz./sq.ft (27.8g/dm ) Motor: OBL 29/27-07A Warranty
More informationInstruction Manual BULLDOG. Wingspan : 1410 mm (55.5in) : 1450 mm (57.1in) : 4900gr gr. Weight. : 6-9 Channel/ 7 servo high torque, 1standard
Wingspan : 1410 mm (55.5in) Length Weight Radio Engine : 1450 mm (57.1in) : 4900gr - 5600gr : 6-9 Channel/ 7 servo high torque, 1standard : 1.20/ 2 stroke 1.80/ 4 stroke KIT CONTENTS: We have organized
More informationAIRCRAFT LANDING GEAR CONSTRUCTION MANUAL
APPENDIX AI KITPLANES FOR AFRICA AIRCRAFT LANDING GEAR CONSTRUCTION MANUAL Revision: C September 2008 Page L1 of 20 NOTE: Please read the General Manual before proceeding. Please read through the entire
More informationARIZ Model Aircrafters
ARIZ NA Model Aircrafters www.arizonamodels.com Biplane Rigging and Assembly Hardware Notes PART AZM 600-020 PULLEY CONFIGURATIONS ALL STYLES ( Assemble as required Not all versions may be included in
More informationFT Legacy Designed By: Josh Bixler Drawing By: Dan Sponholz Version: 1.1 Date:
www.flitetest.com FT Legacy Designed By: Josh Bixler Drawing By: Dan Sponholz Version:. Date: 08..0 GENERAL SPECIFICATIONS: LENGTH: CG: WINGSPAN: WING AREA: DRY WEIGHT: ALL UP WEIGHT: WING LOADING: WCL:
More informationSTORCH. Parts. Additional items needed to complete the Storch
STORCH Parts Fuse with Greenhouse- (Attached) Left and right wing panel Horizontal and vertical stab 2 Wing center blocks 2 Carbon spares for wing 1 Undercarriage with wheels 2 Undercarriage shocks 2 Carbon
More informationTable of Contents. Tail Wheel Assembly Installation.. page 01. Stabilizer Installation.. page 02. Fin Installation.. page 03
Table of Contents Tail Wheel Assembly Installation.. page 01 Stabilizer Installation.. page 02 Fin Installation.. page 03 Elevator and Rudder Hinge Installation.. page 04 Rudder Controls.. page 05 Elevator
More informationDassault Aviation FALCON 7 X. for Jet CAT P160. Assembly Manual. AVIATION Design
Dassault Aviation FALCON 7 X for Jet CAT P160 Assembly Manual AVIATION Design ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr
More informationSD3-60 AIRCRAFT MAINTENANCE MANUAL. This chapter includes information on dimensions, areas, zoning, etc. and is presented as follows:
AMM 6-00-00 1.0.0.0GENERAL 1. General This chapter includes information on dimensions, areas, oning, etc. and is presented as follows: Measurements and Figures which show the stations of fuselage frames,
More informationInstruction Manual EXTRA 260-EP. 1075mm (42.32 in) 1000mm (39.37 in) 1100gr gr. 4 channel - 4 mini servo. Axi motor 2820
1075mm (42.32 in) 1000mm (39.37 in) 1100gr - 1400gr 4 channel - 4 mini servo Axi motor 2820 KIT CONTENTS: We have organized the parts as they come out of the box for better identification during assembly.
More informationI/C FLIGHT GUIDELINES
SPECIFICATION - Wingspan: 3500mm (137.8 in) - Length: 1650mm (64.96 in) - Flying weight: 3700-4000 gr - Wing area: 75 dm2 - Wing loading: 49g/dm2 - Wing type: HQ profile - Covering type: Genuine ORACOVER
More informationSection 75-ZA-3 Fin & Rudder Cable Fairing Installation
Section 75-ZA-3 Fin & Rudder Cable Fairing Installation This manual has been prepared for installation of the Fin and Fairings. This photo assembly manual is intended as a supplement to the drawings. If
More informationRECOMMENDED EDF AND BATTERY SET UP
SPECIFICATION - Wingspan: 1150mm (45.3 in) - Length: 1587mm (62.5 in) - Flying weight: 5.0-5.3 kg - Wing area: 40dm2 - Wing loading: 125g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER
More informationthe leading edge of the wing, at the fuselage - Length: 1540mm (60.6 in) 10% expo; High: 15mm up/down, 10% expo - Wing area: 40dm2
SPECIFICATION - Gravity CG: 165-170 mm (6.5-6.7 in) Back from - Wingspan: 1400mm (55.1 in) the leading edge of the wing, at the fuselage - Length: 1540mm (60.6 in) - Control throw Ailerons: Low: 12mm up/down,
More informationCurtiss Canuck. R/C Scale Model Instructions. CONTACT INFORMATION The Curtiss Canuck was designed by M.K. Bengtson Prototype By Dave Walker
Curtiss Canuck 41 1/2 Curtiss Canuck R/C Scale Model Instructions CONTACT INFORMATION The Curtiss Canuck was designed by M.K. Bengtson Prototype By Dave Walker Manufactured and Distributed by: Bengtson
More informationF-86 SABRE Scale EDF Radio Control model airplane
F-86 SRE Scale EDF Radio ontrol model airplane Model No : FF-D005 Wingspan : 0mm UNDER SFETY PREUTIONS This radio control is not a toy! - lways keep this instruction manual ready on hand for quick reference.
More information第 4 页. 3. Fix the fiber horns to the slots in the aileron with epoxy glue. Accessory list for the installation of aileron.
TopRCModel-USA.com TopRCModel-USA.com 第 3 页 Accessory list for the installation of aileron. 3. Fix the fiber horns to the slots in the aileron with epoxy glue. 1. Sanding the fiber horns. 4. Fix the fiber
More informationMEMO. Assembly Manual. No Specification: Wing Span: 29.3 (830mm) Length: 29.8 (845mm) 2. Warranty
MEMO Assembly Manual No. 4347 Specification: Wing Span: 29.3 (830mm) Length: 29.8 (845mm) 2 Wing Area: 322.4 sq.in. (20.8 dm ) Weight: 14oz.~15oz. (420~430g) Warranty This kit is guaranteed to be free
More information8mm EPP Acrocub. Instruction Manual. Specifications
8mm EPP Acrocub Instruction Manual Specifications Wingspan: 34.6 in (880mm) Length: 31.5 in (800mm) Wing Area: 213.9 sq in (13.8sq dm) Flying Weight: Approx. 9oz (270g) Dear Customer, www.valuehobby.com/8mm-epp-acrocub.html
More informationStrix Goblin Instruction Manual. Rev
Strix Goblin Instruction Manual Rev 3-4.24.2017 1 Introduction Thank you for purchasing the Strix Goblin! This is a high performance plank style aircraft and it was designed using aerodynamic principles
More informationGent EPP. Before use please read the explanations carefully
Before use please read the explanations carefully Gent EPP Instruction Manual Specifications Fuselage length 900mm 35in Wingspan 820mm 32in Flying Weight 210 240g with battery Additional Required Equipment
More informationMEMO. Assembly Manual. No Specification: Wing Span: 29.3 (830mm) Length: 29.8 (845mm) 2. Warranty
MEMO Assembly Manual No. 4347 Specification: Wing Span: 29.3 (830mm) Length: 29.8 (845mm) 2 Wing Area: 322.4 sq.in. (20.8 dm ) Weight: 14oz.~15oz. (420~430g) Warranty This kit is guaranteed to be free
More informationInstruction Manual. Specifications are subjected to change without notice due to product continuous improvements.
Instruction Manual Specifications are subjected to change without notice due to product continuous improvements. 1 The Wargo Signature Yak 55 is the realization of my goal to have the perfect 3D and aerobatic
More informationMooney Mite M-18X Plans and Drawings Index Arranged by Group Miscellaneous Group
Miscellaneous Group 110470 Bushings - Special 314410 Airspeed & Altimeter Installation 110190 Arm - Landing Warning 110070 Button - Static Airspeed 213260 Cone - Wing Fillet 110120 Control - Placard 616100
More informationCAUTION : this plane is not a toy and should be kept away children under 16 years of age! Before use, please carefully read this manual.
Wing Span:74in/1880mm; Flying Weight:7700-7900g; Wing Area:112sq.dm; Radio:8channels 9-10servos; Length:72in/1829mm; Engine:50CC GAS; CAUTION : this plane is not a toy and should be kept away children
More information... BY: Scott Barnhart
Wi! ;ql ;~,... TEe ONEYAII54...................................................................................... BY: Scott Barnhart I TALK UP TmSYAK Techone Hobby is a company schemes. The computer numeric
More information1 All our plane have the matching carbon fiber servo arms, carbon fiber main and tail landing gear, carbon fiber spinner and wood propeller available.
Our airplane model: 1 All our plane have the matching carbon fiber servo arms, carbon fiber main and tail landing gear, carbon fiber spinner and wood propeller available. 2 Pre-glued cowling ring with
More informationInstruction Manual. Wingspan : 1400 mm (55.12 inch) : 1480 mm (58.27 inch) : 5500gr gr. : 6-9 channel/ 8 servo high torque,1 standard
Wingspan : 1400 mm (55.12 inch) g Length : 1480 mm (58.27 inch) Weight : 5500gr - 6000gr Radio : 6-9 channel/ 8 servo high torque,1 standard Engine : GT 22 OS KIT CONTENTS: We have organized the parts
More informationCleveland Quickie Piper Cub
Cleveland Quickie Piper Cub This plan package is not a 100% copy of the original kit. As you make your way through the instructions you will see the differences. Here s just a few of them: The one thing
More informationInstruction Manual MUSTANG P51 - EP. Wingspan : 1377mm (54.21in) : 1180mm (46.46 in) : 2200gr gr. : AXI motor 2826 or 4120
Instruction Manual MUSTANG P51 - EP Wingspan : 1377mm (54.21in) g Length : 1180mm (46.46 in) Weight : 2200gr - 2600gr Engine : AXI motor 2826 or 4120 Radio : 4 channel / 4 servos standard KIT CONTENTS:
More informationSIZE.120 OR 30CC SCALE 1:5 ARF
PC21 PILATUS MK2 SIZE.120 OR 30CC SCALE 1:5 ARF SPECIFICATION - Wingspan: 1772mm (69.72in) - Length: 2019mm (79.5 in) - Flying weight: 6.4-7.2 kg - Wing area: 57.6 dm2 - Wing loading: 113g/dm2 - Wing type:
More informationAlien Aircraft Corp. Assembly Instructions WARRANTY. 403-A Flomich Street Holly Hill, FL (386) The Alien Aircraft Corp
The Gadget KIT # K-104 Assembly Instructions WARRANTY Alien Aircraft Corp. guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover
More informationBob's Card Models and [Resources]
Bob's Card Models www.bobscardmodels.altervista.org and www.zealot.com [Resources] 1 Fairchild C-119G 'Flying Boxcar" (1:72) Decals: US Air Force The Fairchild C-119 Flying Boxcar (Navy designation R4Q)
More informationCONTENTS. Introduction 1. Features 1. Specification 1. Contents 2. Tools And Items 3. Assembly of the front landing gears 4
CONTENTS Introduction 1 Features 1 Specification 1 Contents 2 Tools And Items 3 Assembly of the front landing gears 4 Assembly of horizontal tail & 5 vertical tail and tail wheel Assembly of main wings,
More informationBefore operating this unit, please read these instructions completely.
METIS INSTRUCTIONS The Metis was designed by Filippo Materazzi, F3P, Aeromusical and F6A Italian Champion. It is the last version of his famous indoor freestyle airplane which he flew in World Air Games
More informationInstruction Manual book
book ITEM CODE:BH 139 SPECIFICATION Wingspan : 1,450mm 57.09 in. Length : 1,140 mm 44.88 in. Weight : 3.3kg 7.26 Lbs. Radio : 05 channels. Servo : 07 mini servos+ 3servos Retracts (FUTABA S3170G) EDF:
More information64MM F-16 Fighting Falcon V2
64MM F-16 Fighting Falcon V2 SIMPLE Simple assembly RIGID STRONG DURABLE EPO STABLE SMOOTH FLYING PERFORMANCE FMSMODEL.COM Table of Contents Introductions 3 Contents of Kit 4 Assemble the plane 5 Battery
More informationAlbatros CIII 38. R/C Scale Model Instructions
R/C Scale Model Instructions CONTACT INFORMATION Designed by M.K. Bengtson Manufactured and Distributed by: Bengtson Company e-mail: sales@aerodromerc.com Web Site: www.aerodromerc.com Albatros CIII Thank
More informationRVJET Flying wing specially designed for FPV. RangeVideo Wireless Video Solutions
RVJET Flying wing specially designed for FPV Features: Durable EPO in black or white Variable wing span 1.55m/1.95m Compact during transport (original packing can be used) Specially designed for RVOSD
More informationMX2 100CC & MXS-R 100CC Giant Scale Aerobatic Aircraft
MX2 100CC & MXS-R 100CC Giant Scale Aerobatic Aircraft By the act of using the final assembled model, the purchaser/operator accepts all resulting liability. Included Features: Fuselage and Wing incorporate
More informationInstruction Manual. Specification:
Instruction Manual L O W Specification: Wingspan: 133 cm (52.3 inches) Length : 104 cm (40.9 inches) Weight : 1790gr Engine : 25-32 two stroke Radio : 4 channel - 4 servo W I N G KIT CONTENTS: We have
More informationEXTRA 330LX. Specifications: Code: SEA274. Graphics and specifications may change without notice. ASSEMBLY MANUAL
ASSEMBLY MANUAL EXTRA 330LX Code: SEA274 Graphics and specifications may change without notice. Specifications: Wingspan---------------82.0 in (208.2 cm). Wing area---------------1349.4 sq.in ( 87.1 sq.dm).
More informationInstruction Manual book
Instruction Manual book SPECIFICATION Wingspan : 1,800mm. 70.87 in. Length : 1,350 mm. 53.15in. Weight : 3.6kg. 7.92lbs. Parts Listing required (not included). Glow Engine : 55-61 2 stroke. 91 4 stroke.
More informationInstruction Manual book
book SPECIFICATION Wingspan : 1,920 mm 75.59 in. Length : 1,560 mm 61.42 in. Weight : 5 kg 11.00Lbs. Radio : 06 channels. Servo : 09 servos. Engine : 120 4 stroke. Made in Vietnam. This instruction manual
More informationInstruction Manual book
book (pusher propeller) ITEM CODE:BH 142 SPECIFICATION Wingspan : 1,450mm 57.09 in. Length : 1,165 mm 45.87 in. Weight : 3.3kg 7.26 Lbs. Radio : 05 channels. Servo : 07 size (29 x 13 x 30) mm. Electric
More informationI n s t r u c t i o n M a n u a l. Instruction Manual SPECIFICATION
I n s t r u c t i o n M a n u a l Instruction Manual SPECIFICATION - Wingspan: 3200mm (125,9 in) - Length: 1650mm (64,9 in) - Flying weight: 3000gr 3200gr - Wing area: 64.5 dm2 - Wing loading: 46g/dm2
More informationA Simplified Index of Mooney M-18 Drawings at the NASM
A Simplified Index of Mooney M-18 Drawings at the NASM Dwg. No. Dwg. date Title Models Remarks IDnum Price 0000 23-Aug-54 M-18 Aileron Crank Mooney M-18 17 x 22 DD-0029487 $2.10 0000 [Lower Pick-Up Strap
More informationInstruction Manual book
Instruction Manual book SPECIFICATION Wingspan : 1,920 mm 75.59 in. Length : 1,560 mm 61.42 in. Weight : 5 kg 11.00Lbs. Radio : 06 channels. Servo : 09 servos. Engine : 120 4 stroke. Made in Vietnam. JU87-STUKA
More informationALMOST READY TO FLY. Wing Span in cm. 2
ASSEMBLY MANUAL ALMOST READY TO FLY MS:X9 Specifications Wing Span --------------------------61.4 in ---------------------------156cm. 2 Wing Area --------------------------606.1 sq.in ------------------
More informationInstruction Manual book
Instruction Manual book SPECIFICATION Wingspan : 1,920 mm 75.59 in. Length : 1,560 mm 61.42 in. Weight : 5 kg 11.00Lbs. Radio : 06 channels. Servo : 09 servos. Engine : 120 4 stroke. Made in Vietnam. JU87-STUKA
More informationAirworthiness Directive Schedule
Airworthiness Directive Schedule Aeroplanes Cessna 120 26 November 2015 Notes 1. This AD schedule is applicable to Cessna 120 aircraft manufactured under Federal Aviation Administration (FAA) Type Certificate
More informationRECOMMENDED MOTOR AND BATTERY SET UP
SPECIFICATION - Wingspan: 2190mm (86.2 in) - Length: 1907mm (75 in) - Flying weight: 9000-12000 gr - Wing area: 92 dm2 - Wing loading: 98g/dm2 - Wing type: Naca airfoils - Retract gear type: Air-retract
More informationSBACH SCALE 1:4 ½ ARF
SPECIFICATION - Wingspan: 1663mm (65.5 in) - Length: 1638mm (64.5 in) - Flying weight: 4700-5200 gr - Wing area: 56 dm2 - Wing loading: 85g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER
More informationFT Mini Bravo. Designed By: Cody Thompson Drawing By: Dan Sponholz SPECIFICATIONS
FT Mini Bravo www.flitetest.com Designed By: Cody Thompson Drawing By: Dan Sponholz SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 27.3 in 692.2 mm CENTER OF GRAVITY (FROM NOSE) CG 4 in 355 mm WG SPAN
More informationFT Mini Alpha SPECIFICATIONS
FT Mini Alpha www.flitetest.com Designed By: Jadyn Tafoya Drawing By: Dan Sponholz SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 27.5 in 698.5 mm CENTER OF GRAVITY (FROM NOSE) CG 4 in 355 mm WG SPAN
More informationP-40C TOMAHAWK. Instruction Manual Book. Item code: BH % ALMOST READY TO FLY SPECIFICATION
Instruction Manual Book. P-40C TOMAHAWK INCLUDING AIR RETRACT. AIR UP, AIR DOWN, TURN AND TWIST OLEO STRUTS LANDING GEAR. ALL BALSA - PLY WOOD CONSTRUCTION. COVERED IN A HEAT-SHRINK FILM WITH PRINTED.
More informationSD3-60 STRUCTURAL REPAIR MANUAL
SRM 1.0.0.0STRUCTURES - GENERAL 1. Introduction This chapter contains structural repair information of a general nature pertaining to the complete aircraft. Areas particularly prone to damage are shown.
More informationBuild Manual. Vector & Xtra Slick
Build Manual Vector & Xtra Slick Warning information this is not a toy! Read and understand entire manual before assembling model Do not overlook the warnings and instructions enclosed or those provide
More informationBEHEMOTH 4 ORNITHOPTER DESIGN NOTES PATRICIA JONES BOWMAN February
BEHEMOTH 4 ORNITHOPTER DESIGN NOTES PATRICIA JONES BOWMAN February 15 2005 Behemoth 4 is the latest in my 'Behemoth' series of ornithopter experiments. Fig 1 Behemoth 4 Ornithopter OBJECTIVES [1] To continue
More informationYAK 54 Aerobatic Model Aircraft Assembly and Instruction Manual
YAK 54 Aerobatic Model Aircraft Assembly and Instruction Manual Warning: This radio controlled model is not a toy. It requires skill to fly and is not recommended for the novice pilot. It should not be
More informationInstruction Manual. Congratulations on your purchase of the Flying Legends DH 60G Gipsy Moth!
Instruction Manual Congratulations on your purchase of the Flying Legends DH 60G Gipsy Moth! Designed by the world renowned English designer David Boddington, this superb ¼ scale replica of the famous
More informationASSEMBLY MANUAL. Graphics a nd s pecifications m ay c hange w ithout n otice.
MS: 86 ASSEMBLY MANUAL Graphics a nd s pecifications m ay c hange w ithout n otice. Specifications Wing span-------------------------------------- 70.9 in------------------------------ 180cm. Wing area--------------------------------------
More informationBob's Card Model and [Resources]
Bob's Card Model www.bobscardmodels.altervista.org and www.zealot.com [Resources] Conair C S 2F (Tracker) water-bomber(1:144) Securité Civile's converted Tracker, used for patrol duty, but also for water-bombing
More informationMIG-29. Instruction Manual Book SCALE 1:8 ARF EDF 90MM 95% ALMOST READY TO FLY. Item code: BH153. SPECIFICATION
Instruction Manual Book MIG-29 SCALE 1:8 ARF EDF 90MM Item code: BH153. ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH PVC PRINTING. 95% ALMOST READY TO FLY SPECIFICATION Wingspan: 1,420 mm (55.91 in).
More informationMS:159 ASSEMBLY MANUAL. Graphics and specifications may change without notice.
ASSEMBLY MANUAL MS:159 Graphics and specifications may change without notice. Specifications: Wing span ----------------------------61.8in (157cm). Wing area -----------------1100.5sq.in (71.0sq dm). Weight
More informationMOONEY MITE AIRCRAFT DRAWINGS NASM Archives Accession No HOW TO ORDER COPIES OF DRAWINGS
SI-382712 BLUEPRINT MOONEY MITE AIRCRAFT DRAWINGS NASM Archives Accession No.1989-0028 HOW TO ORDER COPIES OF DRAWINGS NASM s collection of Mooney M-18 Mite drawings is available to restorers, researchers,
More information: 7 channel - 9 servo, Hi-Torque ( Minimum 6 kg ).
g Wingspan : 1820mm (71.65 inches) Length : 1625mm (63.98 inches) Weight : 6900gr Engine : 25cc - 35cc Radio : 7 channel - 9 servo, Hi-Torque ( Minimum 6 kg ). KIT CONTENTS: We have organized the parts
More informationPIPER J - 3 CUB 48S cu. in. displacement 2-stroke cu. in. displacement 4-stroke. Specifications
ALMOST-READY-TO-FLY INSTRUCTION MANUAL PIPER J - 3 CUB 8S 0.0-0.6 cu. in. displacement -stroke 0.5-0.56 cu. in. displacement -stroke Require s : - channel radio w/ 5 standard servos Specifications Wing
More informationP-47D THUNDERBOLT cu. in. displacement 4-stroke. Requires: 6-channel radio w/ 7 standard servos and 2 low profile retract servos.
INSTRUCTION MANUAL P-7D THUNDERBOLT 1.20 cu. in. displacement -stroke Requires: 6-channel radio w/ 7 standard servos and 2 low profile retract servos Specifications Wing Span Wing Area Flying Weight Fuselage
More informationRECOMMENDED MOTOR AND BATTERY SET UP
SPECIFICATION - Wingspan: 1800mm (70.8 in) - Length: 1355mm (53.3 in) - Flying weight: 4100-4300 g - Wing area: 51 dm2 - Wing loading: 80g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER
More informationPilotRC Trainer USER MANUAL
PilotRC Trainer USER MANUAL Introduction Thank you for purchasing our Trainer plane. we strive to achieve a good quality quick build ARF aircraft. It requires the least amount of assembly of any ARF kit
More informationInstruction Manual book
book SPECIFICATION Wingspan : 1,450 mm 57.09 in. Length : 1,200mm 47.24in. Weight : 3.1 kg 6.82 Lbs. Radio : 05 channels. Servo : 07 servos. Engine : 61-75 2 stroke. 91 4 stroke. Made in Vietnam. This
More informationSTICK F Class 60 Class INSTRUCTION MANUAL. Or Electric equivalent. (2T engine) (4T engine) Radio control model SPECIFICATIONS
Radio control model 45 Class 60 Class (2T engine) (4T engine) Or Electric equivalent INSTRUCTION MANUAL STICK F - 1500 SPECIFICATIONS Wingspan 60 in. Length 38.5 in. Electric Motor 650 Watt Glow Engine.45
More information70MM YAK-130 STABLE SMOOTH FLYING PERFORMANCE FMSMODEL.COM
70MM YAK-130 REALISTIC RETRACT & FLAPS INSTALLED RIGID STRONG DURABLE EPO STABLE SMOOTH FLYING PERFORMANCE FMSMODEL.COM Table of Contents Introductions 3 Contents of Kit 4 Assemble the plane 5 Battery
More informationMONOCULP/SR 9 MANUAL BR COLOR BY COLOR BW COLOR RW COLOR
MONOCULP/SR 9 MANUAL BR COLOR BY COLOR BW COLOR RW COLOR Caution! You should not regard this plane as a toy! To ensure safety, please read this instruction manual thoroughly before assembly. Building
More informationGasoline powered. Congratulations on your purchase of this excellent almost-ready-to-fly R/C
Gasoline powered Congratulations on your purchase of this excellent almost-ready-to-fly R/C Congratulations on on your your purchase purchase of this of this excellent excellent almost-ready-to-fly almost-ready-to-fly
More informationGoldWing RC. Pitts Python 50CC V4 Giant Scale Aerobatic Aircraft
GoldWing RC Pitts Python 50CC V4 Giant Scale Aerobatic Aircraft Specifications Wing Span: 71"(1800mm) Length: 80"(2030mm) Wing Area: 1705sq in(110sq dm) Flying Weight: 16 17.6lbs(7300 8000g) Engine: 50CC
More information500 scale fuselage Airwolf INSTRUCTION MANUAL. Produced By:
500 scale fuselage Airwolf INSTRUCTION MANUAL Produced By: 1 TABLE OF CONTENTS Additional items required. Adhesives and building supplies.. Disclaimer Parts sheet.... Initial setup. Installing the mechanics..
More informationTUCANO cubic inch displacement 2-stroke 0.91 cubic inch displacement 4-stroke
INSTRUCTION MANUAL TUCANO 60 0.55 cubic inch displacement 2-stroke 0.91 cubic inch displacement -stroke Requires : 7-channel radio w/ 6 standard servos and 2 low profile retract servos. Wing Span Wing
More informationInstruction Manual book
Instruction Manual book Item code:bh133 SPECIFICATION Wingspan : 1,400 mm 55.12 in. Length : 1,350 mm 53.15 in. Weight : 3.7 kg 8.14 Lbs. Radio : 08-09 channels. Servo : 08-09 servos. EDF : Turingy SK3
More informationINSTRUCTION MANUAL BOOK
INSTRUCTION MANUAL BOOK ITEM CODE BH57. SPECIFICATION Wingspan: 1,470 mm. 57.87 in. Length : 1,180 mm. 46.46 in. Weight : 2.7 Kg. 5.94 Lbs. Engine : 46 cu.in 2 stroke. 52 cu.in 4 stroke. Radio : 4 channels.
More information29% KATANA ARF ASSEMBLY MANUAL
29% KATANA ARF ASSEMBLY MANUAL Required but not included Aircraft Specifications: 4 channel radio and supporting equipment Wing Span 84 Engine 3.2-4.2 c.i. (50-60 c.c.) Wing Area 1270 Sq. in. Fuel Tank
More informationDE HAVILLAND DH98 MOSQUITO 480 by Ivan Pettigrew Construction Notes
DE HAVILLAND DH98 MOSQUITO 480 by Ivan Pettigrew Construction Notes This is a model of the T-III which was a trainer version of the DH98 Mosquito fitted with dual controls. An earlier model at 1/9 scale
More informationInstruction Manual book
Instruction Manual book SPECIFICATION Wingspan : 1,780 mm 70.08 in. Length : 1,520 mm 59.84 in. Weight : 4.8 kg 10.56 Lbs. Radio : 06 channels. Servo : 09 servos. Engine : 120 4stroke Made in Vietnam.
More informationErsatzteil-Preisliste 90/70 Dual mm
Ersatzteil-Preisliste 90/70 Dual mm Item No Name Price Pictures F-14 TOMCAT FJ3081101 Fuselage 180,50 FJ3081102 Main wing Set 102,75 FJ3081103 Elevator 55,50 FJ3081104 Rudder 58,25 FJ3081105 Nose cone
More informationAssembly Manual For. Wingspan: 88 in Wing area: sp in Length: 78.8 in Engine: 50CC.
Assembly Manual For Wingspan: 88 in Wing area: 1479.8 sp in Length: 78.8 in Engine: 50CC www.pilot-rc.com INTRODUCTION Thank you for purchasing our new 50 cc model. We strive to bring you the most complete
More informationPilotRC SKYWOLF 88 USER MANUAL. WINGSPAN:2240mm LENGTH:1930mm
PilotRC SKYWOLF 88 USER MANUAL WINGSPAN:2240mm LENGTH:1930mm Introduction Thank you for purchasing our Skywolf 88 plane. We strive to achieve a good quality quick build ARF aircraft. It requires the least
More informationTURBO BEAVER. Instruction Manual Book. Item code: BH % ALMOST READY TO FLY ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER
Instruction Manual Book. TURBO BEAVER ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER 95% ALMOST READY TO FLY SPECIFICATION: - Wingspan: 2,250 mm (88.58 in). Length: 1,675 mm ( 65.94 in). Weight:
More informationAssembly Manual. Version 01/01/2006
Assembly Manual ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr www.adjets.com Version 01/01/2006 INTRODUCTION is our new jet
More informationRECOMMENDED MOTOR AND BATTERY SET UP
SPECIFICATION - Wingspan: 6000mm (236.2 in) - Length: 2873mm (113.1 in) - Flying weight: 14-18 kg - Wing area: 219.4 dm2 - Wing loading: 64g/dm2 - Wing type: HQ airfoils - Covering type: Genuine ORACOVER
More informationRADIO CONTROL MODEL ASSEMBLY INSTRUCTIONS. Wasp
RADIO CONTROL MODEL ASSEMBLY INSTRUCTIONS Wasp TRAINER Almost ready-to-fly Wingspan 1520mm Fuselage length 1105mm Engine: 40-46 2T / 52-60 4T Electric Motor: 600-700W Radio: 5 channel / 4-5 servo RC Functions:
More informationWilga 20cc. Assembly Manual
Wilga 20cc Assembly Manual Caution! You should not regard this plane as a toy! To ensure safety, please read this instruction manual thoroughly before assembly. Building and operating a model plane requires
More informationRECOMMENDED MOTOR AND BATTERY SET UP
SPECIFICATION - Wingspan: 1410mm (55.5 in) - Length: 1278mm (50.3 in) - Flying weight: 3.2-3.4 kg - Wing area: 41.3 dm2 - Wing loading: 75g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER
More informationP-47D THUNDERBOLT. Requires: 6-channel radio w/ 7 standard servos and 2 low profile retract servos. Specifications
INSTRUCTION MANUAL P-47D THUNDERBOLT 1.20 cu. in. displacement 4-stroke Requires: 6-channel radio w/ 7 standard servos and 2 low profile retract servos Specifications Wing Span Wing Area Flying Weight
More information