Serving and clearing trolleys, shelf trolleys, tray clearing trolleys

Transcription

1 Serving and clearing trolleys, shelf trolleys, tray clearing trolleys Serving and clearing trolleys Serving trolleys 95 Clearing trolleys 99 Accessories for serving and clearing trolleys 100 Shelf trolleys Shelf trolleys for Cook&Chill 103 Shelf trolleys for eutectic plates 103 Shelf trolleys 104 Accessories for shelf trolleys 106 Tray clearing trolleys Tray clearing trolleys 108 Accessories for tray clearing trolleys 109 Serving/clearing tr., shelf trolleys, tray clearing trolleys BLANCO Professional 91

2 Rugged assistants every day: BLANCO serving trolleys. SW 8 x 5-3 with three-sided panelling and 2 hinged doors Standard bumper rail All serving and clearing trolleys are equipped with a strong bumper rail. They protect the trolley and inventory against damage. Integrated noise dampers Quiet! A noise-insulating antidrumming mat is mounted under each shelf. This considerably reduces annoying rolling noises. Shelves with profile edge All shelves are produced with an all-round raised profile edge. This prevents anything from slipping over the edge - even when the going gets rough. Ingeniously simple The panelling can be mounted on existing BLANCO serving trolleys in no time. Simply clamp it behind the edge of the upper shelf and fix it securely to the lower shelf. And you re done! More stability Excellent finishing! One-piece welded seams connect the tube frame to the shelves, and increase the stability in the process. Curled edges The curled edges make the shelf stable and ensure an extremely high load-bearing capacity. In addition, they also protect the personnel from injuries. SW 10 x 6-3 BASIC SW 8 x 5-2 SW 6 x BLANCO Professional

3 Quality in the fast lane BLANCO shelf trolleys Whether it's transport, temporary or long-term storage the BLANCO shelf trolleys will make any chef happy. Shelf trolleys are ideally suited for storing and transporting GN containers, serving salads and desserts or portioning on conveyor belts. RWR 160 shelf trolley for storing and transporting GN containers. Serving/clearing tr., shelf trolleys, tray clearing trolleys RWR 2-A shelf trolley for portioning on conveyor belts. RWR 751 shelf trolley can be used as an alternative for GN 1/1 or GN 2/1. RWR 160 shelf trolley RWR 162 shelf trolley BLANCO Professional 93

4 Tray clearing trolleys by BLANCO Professional Tray clearing trolleys quickly ensure order in self-service areas. To ensure that dish return is executed safely even during the most chaotic rush hours, tray clearing trolleys by BLANCO Professional are made of high-quality stainless. The welded frame construction guarantees maximum stability and durability with compact dimensions and top manoeuvrability. The standard wall guards protect units and furniture. Upon request, the trolleys can be delivered with an ergonomical push handle made of hygienic stainless or additional push-through protection. TAW 2 x 10 with 3-sided panelling, push handle, trolley top and railing TAW 2 x 10 with 2-sided panelling, push handle, trolley top and railing TAW 10 with 2-sided panelling The panelling: Brings colour to everyday life. The panelling sets for the BLANCO tray clearing trolleys can be used anywhere a privacy shield is desired. The sturdy side walls can be hooked in and unhooked easily. This makes cleaning easier and the trolley can still be used without panelling. In addition to stainless, 13 panelling colours offer a matching shade for any setting. 94 BLANCO Professional

5 Serving trolleys Made of corrosion-resistant stainless Welded shelves * Synthetic castors corrosion-resistant in compliance with DIN Serving trolleys SW 6 x 4 Illustration Model Designation Dimensions L x W x H/ clear height between shelves (mm) Number/ dim. of shelves L x W (mm) SW 6 x 4-2 SW 6 x 4-2 Serving trolley 700 x 500 x 950 mm 2 shelves 585 mm 600 x 400 mm Weight/ load cap. (kg) 125 mm dia kg synthetic * kg SW 6 x 4-3 SW 6 x 4-3 Serving trolley 700 x 500 x 950 mm 3 shelves 275 mm 600 x 400 mm Serving trolleys SW 8 x 5 SW 8 x 5-2 SW 8 x 5-2 Serving trolley 900 x 600 x 950 mm 2 shelves 585 mm 800 x 500 mm 13.0 kg synthetic * kg Serving/clearing tr., shelf trolleys, tray clearing trolleys SW 8 x 5-3 SW 8 x 5-3 Serving trolley 900 x 600 x 950 mm 3 shelves 275 mm 800 x 500 mm SW 8 x 5-4 SW 8 x 5-4 Serving trolley 900 x mm 4 shelves 285 mm 800 x 500 mm 15.0 kg synthetic * kg kg synthetic * kg kg synthetic * kg SW 8 x 5-5 SW 8 x 5-5 Serving trolley 900 x 600 x 1290 mm 5 shelves 205 mm 800 x 500 mm 25.0 kg synthetic * kg The underlined order numbers are available for delivery within 72 hours in commercially BLANCO Professional 95

6 Serving trolleys Made of corrosion-resistant stainless Welded shelves * Synthetic castors corrosion-resistant in compliance with DIN Serving trolleys SW 9 x 6 Illustration Model Designation Dimensions L x W x H/ clear height between shelves (mm) Number/ dim. of shelves L x W (mm) SW 9 x 6-2 SW 9 x 6-2 Serving trolley 1000 x 650 x 950 mm 2 shelves 585 mm 900 x 550 mm Weight/ load cap. (kg) 125 mm dia kg synthetic * kg SW 9 x 6-3 SW 9 x 6-3 Serving trolley 1000 x 650 x 950 mm 3 shelves 275 mm 900 x 550 mm 20.0 kg synthetic * kg SW 9 x 6-4 SW 9 x 6-4 Serving trolley 1000 x 650 x 1290 mm 4 shelves 285 mm 900 x 550 mm 30.0 kg synthetic * kg SW 9 x 6-5 SW 9 x 6-5 Serving trolley 1000 x 650 x 1290 mm 5 shelves 205 mm 900 x 550 mm 32.0 kg synthetic * kg BLANCO Professional The underlined order numbers are available for delivery within 72 hours in commercially

7 Serving trolleys Made of corrosion-resistant stainless Welded shelves * Synthetic castors corrosion-resistant in compliance with DIN Serving trolleys SW 10 x 6 BASIC Illustration Model Designation Dimensions L x W x H/ clear height between shelves (mm) SW 10 x 6-2 BASIC SW 10 x 6-2 BASIC Serving trolley Number/ dim. of shelves L x W (mm) 1100 x 700 x 950 mm 2 shelves 585 mm 1000 x 600 mm Weight/ load cap. (kg) 125 mm dia. 20,0 kg 120,0 kg synthetic * SW 10 x 6-3 BASIC SW 10 x 6-3 BASIC Serving trolley 1100 x 700 x 950 mm 3 shelves 275 mm 1000 x 600 mm 23,0 kg 120,0 kg synthetic * Serving/clearing tr., shelf trolleys, tray clearing trolleys SW 10 x 6-3 BASIC GDD (shown with access.) SW 10 x 6-3 BASIC GDD Serving trolley with larger distance between shelves, for holding 3 GDD topmounted frames (Order No ) 1100 x 700 x 1290 mm 3 shelves 445 mm 1000 x 600 mm 30.0 kg 2 of which have brakes synthetic * SW 10 x 6-4 BASIC SW 10 x 6-4 BASIC Serving trolley 1100 x 700 x 1290 mm 4 shelves 285 mm 1000 x 600 mm 34,0 kg 120,0 kg synthetic * SW 10 x 6-5 BASIC SW 10 x 6-5 BASIC Serving trolley 1100 x 700 x 1290 mm 5 shelves 205 mm 1000 x 600 mm 37,0 kg 120,0 kg synthetic * The underlined order numbers are available for delivery within 72 hours in commercially BLANCO Professional 97

8 Serving trolleys Made of corrosion-resistant stainless Welded shelves * Synthetic castors corrosion-resistant in compliance with DIN Serving trolleys SW 10 x 6 Illustration Model Designation Dimensions L x W x H/ clear height between shelves (mm) Number/ dim. of shelves L x W (mm) SW 10 x 6-2 SW 10 x 6-2 Serving trolley 1100 x 700 x 1010 mm 2 shelves 585 mm 1000 x 600 mm SW 10 x 6-3 SW 10 x 6-3 Serving trolley 1100 x 700 x 1010 mm 3 shelves 275 mm 1000 x 600 mm SW 10 x 6-4 SW 10 x 6-4 Serving trolley 1100 x 700 x 1350 mm 4 shelves 285 mm 1000 x 600 mm SW 10 x 6-5 SW 10 x 6-5 Serving trolley 1100 x 700 x 1350 mm 5 shelves 205 mm 1000 x 600 mm Weight/ load cap. (kg) 125 mm dia. 2 fixed castors, 2 steering castors with brakes 23.0 kg synthetic * kg 23.0 kg kg 23.0 kg synthetic * kg 23.0 kg kg 2 fixed castors, 2 steering castors with brakes 28.0 kg synthetic * kg kg synthetic * kg fixed castors, 2 steering castors with brakes 40.0 kg synthetic * kg kg synthetic * kg fixed castors, 2 steering castors with brakes 42.0 kg synthetic * kg kg synthetic * kg BLANCO Professional The underlined order numbers are available for delivery within 72 hours in commercially

9 Clearing trolleys Made of corrosion-resistant stainless Welded shelves * Synthetic castors corrosion-resistant in compliance with DIN Clearing trolleys ARW 9 x 6 Illustration Model Designation Dimensions L x W x H/ clear height between shelves (mm) Number/ dim. of shelves L x W (mm) ARW 9 x 6-2 ARW 9 x 6-2 Clearing trolley 1000 x 650 x 1030 mm 2 shelves 585 mm 900 x 550 mm Weight/ load cap. (kg) 125 mm dia kg 2 of which have brakes synthetic * ARW 9 x 6-3 ARW 9 x 6-3 Clearing trolley 1000 x 650 x 1030 mm 3 shelves 275 mm 900 x 550 mm 23.0 kg 2 of which have brakes synthetic * Serving/clearing tr., shelf trolleys, tray clearing trolleys Clearing trolleys ARW 10 x 6 ARW 10 x 6-2 ARW 10 x 6-2 Clearing trolley 1100 x 700 x 1010 mm 2 shelves 481 mm 1000 x 600 mm 25.0 kg 2 fixed castors, kg 2 steering castors with brakes synthetic * of which have brakes synthetic * The underlined order numbers are available for delivery within 72 hours in commercially BLANCO Professional 99

10 Accessories for serving and clearing trolleys Panelling sets Illustration Model Designation For model Stainless panelling Stainless panelling 3-sided, stainless, for hooking on serving trolleys, can be completely removed for cleaning SW 8x5-2, SW 8x SW 10x6-2, SW 10x6-3, SW 10x6-2 BASIC, SW 10x6-3 BASIC f Stainless panelling, with hinged doors Stainless panelling, with hinged doors 3-sided, with stainless hinged doors on the front for easy mounting to serving trolleys, panelling parts can be completely removed for cleaning, not possible for SW with gusset plates SW 8x5-2, SW 8x SW 10x6-2, SW 10x6-3, SW 10x6-2 BASIC, SW 10x6-3 BASIC Coloured panelling Coloured panelling 3-sided, thin sheet, double-sided, powder-coated in various colours, for hooking on serving trolleys, can be completely removed for cleaning SW 8x5-2, SW 8x lime apple green carmine red graphite black raspberry SW 10x6-2, SW 10x6-3, SW 10x6-2 BASIC, SW 10x6-3 BASIC Coloured panelling, with hinged doors Coloured panelling, with hinged doors 3-sided, with hinged doors on the front, thin sheet, double-sided, powder-coated in various colours, for easy mounting to serving trolleys, panelling parts can be completely removed for cleaning, not possible for SW with gusset plates SW 8x5-2, SW 8x lime apple green carmine red graphite black raspberry SW 10x6-2, SW 10x6-3, SW 10x6-2 BASIC, SW 10x6-3 BASIC BLANCO Professional The underlined order numbers are available for delivery within 72 hours in commercially

11 Panelling colours Colours may vary. 01 signal white RAL pearl white RAL pale brown RAL stone grey RAL umbra grey RAL graphite black RAL 9011 Serving/clearing tr., shelf trolleys, tray clearing trolleys 06 broom yellow RAL carmine red RAL sapphire blue RAL 5003 raspberry Pantone 228 C lime Pantone 382 C espresso Pantone 4695 C apple green Pantone 370 C BLANCO Professional 101

12 Accessories for serving and clearing trolleys Illustration Model Designation Dimensions L x W x H (mm) Capacity AFB 4 x 2 x 2.5 AFB 4 x 2 x 2.5 Garbage container of stainless, deep-drawn, with hanging device, can be hung on and removed from push handle (Not suitable for SW 6) 425 x 225 x 250 mm 18.5 liters BGN 1/3-150 BGN 1/3-150 Cutlery container of stainless, deep-drawn, with hanging device, can be hung on and removed from push handle 325 x 176 x 150 mm 110 pieces of cutlery GDD top-mounted frame GDD topmounted frame Top-mounted frame for correct storage, drying, transporting and dispensing Gastronorm lids with form-fitting seal, suitable for serving trolleys SW 10 x 6-2, SW 10 x 6-2 BASIC, SW 10 x 6-3 BASIC GDD, Top-mounted frame can also be used without serving trolley 963 x 496 x 231 mm 30 lids for GN 1/1 or 60 lids for GN 1/2 or 90 lids for GN 1/ Railing Illustration Model Designation For model Added price in Railing Railing Railing, on 3 sides, 50 mm high, one long side open all SW per shelf Railing, all-round, 50 mm high per shelf Shelf reinforcements Gusset plate Gusset plate 4 gusset plates per shelf, (not on bottom shelf) SW 6x4, SW 8x5, SW 9x6, SW 10x6 per shelf not shown Reinforcing profile Shelf reinforcing profile per shelf SW 8x5, SW 9x6, SW 10x6 per shelf not shown Air-identical castors 125 mm dia., 2 of which have brakes Pneumatic-tired castors, 180 mm dia. 4 steering castors SW 6x4, SW 8x5, SW 9x6, SW 10x6 BASIC SW 10x6 SW 6x4, SW 8x5, SW 9x6, SW 10x6 BASIC 102 BLANCO Professional The underlined order numbers are available for delivery within 72 hours in commercially

13 Shelf trolleys Made of corrosion-resistant stainless with 125 mm dia., 2 of which have brakes * Synthetic castors, corrosion-resistant in compliance with DIN Shelf trolleys for use with Cook & Chill Illustration Model Designation Support pairs/ spacing RWR 2 RWR 2 Shelf trolley, 2-part, for hanging in GN containers 6 pairs + 2 pairs 165 mm Capacity Dimensions L x W x H (mm) Weight/ load cap. (kg) 125 mm dia. 8 GN 1/1 812 x 625 x 900 mm 17.0 kg synthetic * kg RWR 3 RWR 3 Shelf trolley, 3-part, for hanging in GN containers 9 pairs + 3 pairs 165 mm 12 GN 1/ x 625 x 900 mm 23.0 kg synthetic * kg RWR 2-A RWR 2-A Shelf trolley, 2-part, with attachment, for hanging in GN containers 6 pairs + 2 pairs + 2 pairs in attachment 10 GN 1/1 812 x 625 x 1200 mm 22.0 kg synthetic * kg Serving/clearing tr., shelf trolleys, tray clearing trolleys 165 mm RWR 3-A RWR 3-A Shelf trolley, 3-part, with attachment, for hanging in GN containers 9 pairs + 3 pairs + 3 pairs in attachment 15 GN 1/ x 625 x 1200 mm 31.0 kg synthetic * kg mm Shelf trolleys for eutectic plates Illustration Model Designation Support pairs/ spacing not shown RWR-EP 23 Shelf trolley for transporting and storing eutectic plates in cold storage houses 23 pairs 58 mm Capacity Dimensions L x W x H (mm) Weight/ load cap. (kg) 125 mm dia. 23 eutectic 464 x mm 31 kg synthetic * plates (lengthwise insertion) 200 kg RWR-EP 46 Shelf trolleys for transporting and storing eutectic plates in cold storage houses 23 pairs 58 mm 46 eutectic plates (crosswise insertion) 668 x 739 x 1675 mm 39 kg synthetic * kg The underlined models are available for delivery within 72 hours in commercially BLANCO Professional 103

14 Shelf trolleys Made of corrosion-resistant stainless Support rails with integrated tip safety and push-through protection with 125 mm dia., 2 of which have brakes * Synthetic castors, corrosion-resistant in compliance with DIN Shelf trolleys Illustration Model Designation Support pairs/ spacing RWRA 850 RWRA 850 Shelf trolley with work surface RWRA 850/900 8 pairs 73 mm Capacity 8 GN 1/1 or 16 GN 1/2 Dimensions L x W x H (mm) Weight/ load cap. (kg) 125 mm dia. 460 x 613 x 845 mm 15.0 kg synthetic * kg x 613 x 900 mm synthetic * RWRA 851 RWRA 851 Shelf trolley with work surface RWRA 851/900 8 pairs 73 mm RWRA 852 RWRA 852 Shelf trolley 16 pairs with work surface, 73 mm 2-section 8 GN 2/1 or 16 GN 1/1 16 GN 1/1 or 32 GN 1/2 662 x 733 x 845 mm 20.0 kg synthetic * x 733 x 900 mm synthetic * x 613 x 845 mm 22.0 kg synthetic * kg RWR 751 RWR 751 Shelf trolley 7 pairs 73 mm 7 GN 2/1 or 14 GN 1/1 662 x 733 x 845 mm 16.0 kg synthetic * RWR 160 RWR 160 Shelf trolley 18 pairs 73 mm 18 GN 1/1 or 36 GN 1/2 460 x 613 x 1645 mm 15.0 kg synthetic * RWR RWR Shelf trolley 20 pairs 75 mm 20 GN 1/1 or 40 GN 1/2 460 x 613 x 1800 mm 19.0 kg synthetic * BLANCO Professional The underlined models are available for delivery within 72 hours in commercially

15 Shelf trolleys Made of corrosion-resistant stainless Support rails with integrated tip safety and push-through protection with 125 mm dia., 2 of which have brakes * Synthetic castors, corrosion-resistant in compliance with DIN Shelf trolleys Illustration Model Designation Support pairs/ spacing RWR 161 RWR 161 Shelf trolley 18 pairs 73 mm Capacity 18 GN 2/1 or 36 GN 1/1 Dimensions L x W x H (mm) Weight/ load cap. (kg) 125 mm dia. 662 x 733 x 1645 mm 25.0 kg synthetic * RWR RWR Shelf trolley 20 pairs 75 mm 20 GN 2/1 or 40 GN 1/1 662 x 733 x 1800 mm 25.0 kg synthetic * RWRR 161 RWRR 161 Shelf trolley when empty, can be pushed into each other to save space 18 pairs 73 mm 18 GN 2/1 or 36 GN 1/ x 734 x 1645 mm 25.0 kg synthetic * Serving/clearing tr., shelf trolleys, tray clearing trolleys RWRE 161 RWRE 161 Shelf trolley for roll-in refrigerators 18 pairs 73 mm 18 GN 2/1 or 36 GN 1/1 587 x 658 x 1645 mm 25.0 kg synthetic * RWR 162 RWR 162 Shelf trolley, 2-piece 36 pairs 73 mm 36 GN 1/1 or 72 GN 1/2 820 x 613 x 1645 mm 29.0 kg synthetic * RWR SK-161 RWR SK-161 Salad and dessert serving trolley with serving doors 5 pairs 115 mm 9 pairs 73 mm 14 GN 2/1-20 or 14 BZG 2/ x 733 x 1645 mm 30.0 kg synthetic * The underlined models are available for delivery within 72 hours in commercially BLANCO Professional 105

16 Shelf trolleys Made of corrosion-resistant stainless Support rails with integrated tip safety and push-through protection with 125 mm dia., 2 of which have brakes * Synthetic castors, corrosion-resistant in compliance with DIN Shelf trolleys Illustration Model Designation Support pairs/ spacing RWR-VP 163 RWR-VP 163 Shelf trolley for storing and providing pre-portioned and lidded cold items 12 pairs 115 mm Capacity 24 GN or EN trays Dimensions L x W x H (mm) Weight/ load cap. (kg) 125 mm dia. 671 x 832 x 1675 mm 18 kg synthetic * kg Accessories for shelf trolleys Accessories Illustration Model Designation For model Dust protection hood (shown with shelf trolley) Dust protection hood for shelf trolley, not suitable for shelf trolleys with push handle Dust protection hood, consisting of transparent, crack-proof polyethylene, 280 µ, 5-sided protection, sewn seam with zipper RWR RWR RWRR RWR RWR-VP Insulating hood (shown with shelf trolley) Insulating hood for shelf trolley, not suitable for shelf trolleys with push handle Insulating hood, inside and outside of food-safe, tear-resistant PE, 300 µ thick, aluminised on both sides, 5-sided protection (Filling: 3 mm thick PP), with Velcro fastener, not suitable for shelf trolleys with panelling RWR RWR RWRR RWR RWR-VP BLANCO Professional The underlined models are available for delivery within 72 hours in commercially

17 Accessories for shelf trolleys Accessories Illustration Model Designation For model Price in not shown Stainless panelling on 2 sides RWR 2, RWR 2-A, RWR 3, RWR 3-A Stainless panelling RWRA 850, RWRA 852 RWRA 851, RWR 751 RWR 160 RWR RWR 161 RWR RWR 162 RWR-VP 163 Stainless panelling on 3 sides RWR 2, RWR 2-A, RWR 3, RWR 3-A RWRA 850 RWRA 851 RWRA 852 RWR 751 RWR 160 RWR RWR 161 RWR RWR 162 RWR-VP 163 Resopal panelling Resopal panelling Resopal panelling, on 2 or 3 sides all RWR, not available for: RWRR 161, RWR SK 161, RWRE 161 Serving/clearing tr., shelf trolleys, tray clearing trolleys Top surface Top surface Trolley top made of stainless RWR 160, RWR 162 RWR 161 Push handle Push handle Push handle made of stainless, not possible in combination with dust protection or insulating hoods RWR 2, RWR 3, RWR 2-A, RWR 3-A, RWR 160, RWR , RWR 161, RWR , RWR 162 Transport locking bar Transport locking bar Transport locking bar made of stainless on both sides RWR 160, RWR 161, RWR-VP 163 RWR , RWR RWRA 850, RWRA 851, RWRA 852, RWR 751 RWR 162 The underlined models are available for delivery within 72 hours in commercially BLANCO Professional 107

18 Tray clearing trolleys Made of corrosion-resistant Tray supports with integrated push-through protection on both sides, tray support frame completely removable 125 mm dia., 2 of which have brakes Synthetic castors, corrosion-resistant in compliance with DIN Illustration Model Designation Capacity Dim. L x W x H (mm)/ Support spacing (mm) TAW 10 TAW 10 GN Tray clearing trolley, 1-piece, accessible from both sides TAW 10 EN 10 Gastronorm trays (530 x 325 mm) 10 Euronorm trays (530 x 370 mm) 468 x 673 x 1550 mm 125 mm 513 x 673 x 1550 mm 125 mm Max. load cap./ Max. load cap. per support pair (kg) kg 4.5 kg Weight: 21 kg TAW 10 KN 10 canteen trays (460 x 344 mm) 487 x 607 x 1550 mm 125 mm TAW 2 x 10 TAW 2 x 10 GN Tray clearing trolley, 2-piece, accessible from both sides TAW 2 x 10 EN 20 Gastronorm trays (530 x 325 mm) 20 Euronorm trays (530 x 370 mm) 850 x 673 x 1550 mm 125 mm 940 x 673 x 1550 mm 125 mm kg 4.5 kg Weight: 33 kg TAW 2 x 10 KN 20 canteen trays (460 x 344 mm) 888 x 607 x 1550 mm 125 mm TAW 12 TAW 12 GN Tray clearing trolley, 1-piece, accessible from both sides 12 Gastronorm trays (530 x 325 mm) 468 x 673 x 1550 mm 100 mm kg 4.5 kg Weight: 21 kg TAW 12 EN 12 Euronorm trays (530 x 370 mm) 513 x 673 x 1550 mm 100 mm TAW 12 KN 12 canteen trays (460 x 344 mm) 487 x 607 x 1550 mm 100 mm TAW 2 x 12 TAW 2 x 12 GN Tray clearing trolley, 2-piece, accessible from both sides TAW 2 x 12 EN 24 Gastronorm trays (530 x 325 mm) 24 Euronorm trays (530 x 370 mm) 850 x 673 x 1550 mm 100 mm 940 x 673 x 1550 mm 100 mm kg 4.5 kg Weight: 33 kg TAW 2 x 12 KN 24 canteen trays (460 x 344 mm) 888 x 607 x 1550 mm 100 mm BLANCO Professional The underlined models are available for delivery within 72 hours in commercially

19 Accessories for tray clearing trolleys Illustration Designation For model Coloured panelling on 2 sides, lime Side wall panelling on 2 sides, coloured (colours: see page 101) Panelling parts can be completely removed for cleaning, thin sheet, electrolytically on both sides, powder-coated in various colours TAW GN TAW EN TAW KN Side wall panelling on 2 sides, stainless Panelling parts can be completely removed for cleaning TAW GN TAW EN TAW KN Panelling on 3 sides, stainless Side and rear wall panelling on 3 sides, coloured (colours: see page 101) Panelling parts can be completely removed for cleaning, thin sheet, electrolytically on both sides, powder-coated in various colours TAW 10 GN TAW 12 GN TAW 10 EN TAW 12 EN TAW 10 KN TAW 12 KN TAW 2 x 10 GN TAW 2 x 12 GN TAW 2 x 10 EN TAW 2 x 12 EN TAW 2 x 10 KN TAW 2 x 12 KN Serving/clearing tr., shelf trolleys, tray clearing trolleys Side and rear wall panelling on 3 sides, stainless Panelling parts can be completely removed for cleaning TAW 10 GN TAW 12 GN TAW 10 EN TAW 12 EN TAW 10 KN TAW 12 KN TAW 2 x 10 GN TAW 2 x 12 GN TAW 2 x 10 EN TAW 2 x 12 EN TAW 2 x 10 KN TAW 2 x 12 KN Trolley top Stainless- trolley top with all-round railing Roof can be completely removed for cleaning, stainless TAW 10 GN TAW 12 GN TAW 10 EN TAW 12 EN TAW 10 KN TAW 12 KN TAW 2 x 10 GN TAW 2 x 12 GN TAW 2 x 10 EN TAW 2 x 12 EN TAW 2 x 10 KN TAW 2 x 12 KN Push handle all TAW Additional push-through protection (stainless- rod) TAW 10 and TAW 12 TAW 2 x 10 KN and TAW 2 x 12 KN not shown, all TAW Price reduction for model with synthetic castors The underlined models are available for delivery within 72 hours in commercially BLANCO Professional 109

20 110 BLANCO Professional