MAGNETIC WORKHOLDING. Grinding Pallet Milling EDM Turning Lifting BRC-06-EN

Size: px
Start display at page:

Download "MAGNETIC WORKHOLDING. Grinding Pallet Milling EDM Turning Lifting BRC-06-EN"

Transcription

1 MAGNETIC WORKHOLDING Grinding Pallet Milling EDM Turning Lifting Permanent Electro Electro-permanent BRC-0-EN

2 Magnetic Workholding Applications Table of contents Grinding EMA EPA EPD EME EMV EPB EMM EPM EPS EPN PMF PMT PMA EMK EPZ Pallet PPN / PPA PPC / PPM Milling EMI PSP POLE EXTENSION PRP PMM PZP PCC EPK EDM PFD MBF NF PMB PMG Turning PMY NY EPY NR EMW EPW EMY EPQ PR Lifting magnets PLM PLM-T PLM-R PHS / PVS Control unit CUA / CUD / CUT / CGD / JB CU / CG / RMC CEB / CUK Tools & Magnets PT SERIES MB / MSA MSB

3 Driven by magnetics Soph offers the most comprehensive package of magnetic solutions for workholding, mold and die clamping and material handling. Starting the business in 1998, until now Soph owns the trademarks and business of Brisc, Magbo and Helmoltz which is for workholding, mold and die clamping and material handling respectively. Based in Hamburg Germany, after years of development, Soph now has branches in USA and China. By installing one of the largest finished product inventories and training highly skilled service and sales engineers, Soph has created a substantial reference base in Europe, North America and Far east in a relatively short time. Our ability to provide immediate technical answers, immediate service, custom design, OEM specific products and product lines keeps us ahead of the curve. With creative problem solving and application specific solutions, Soph is considered to be one of the finest sources for magnetic solutions available. We are dedicated to provide the best product with the best performance to match each application. By using customer input we are able to provide tailor made solutions using standardized products to create unmatched value in substantially shorter market cycles. Products Applications Permanent Electro Electro-permanent Grinding PMF / PMT / PMA PMY / NY / PMM PFD / MBF / NF PMB / PMG / NR EMA / EME / EMV EMM / EMK EPA / EPB / EPD EPM / EPN / EPS EPW / EPZ Pallet PPA / PPC / PPM PPN Milling PMM / NF / PMB PMG EMI EPK / PSP / PRP PZP / PCC EDM PFD / MBF / NF PMB / PMG / PMF PMT / PMY Turning PMY / NY / NR NF EMW / EMY EPY / EPW / EPQ PR Lifting PLM / PLM-T / PLM-R PHS / PVS PALLET MILLING EDM TURNING

4 EMA Grinding Finepitch electromagnetic chuck For versatile clamping on a broad range of workpiece sizes Pole pitch mm Highest uniform clamping force up to 140 N/cm² Less than 5 C chuck temperature rise after 1 hour working Mono-block housing for maximum stability Low current with minimum power consumption Low profile for more wheel head clearance Versatile clamping, excellent holding on a broad range of workpiece size Model Width(B) Length(L) Base Width(B2) Height(H) L1 H1 Voltage Current Net Weight EMA-300 EMA-3080 EMA EMA EMA EMA-400 EMA-4080 EMA EMA EMA EMA EMA-500 EMA-5080 EMA EMA EMA EMA EMA-080 EMA-0100 EMA-0120 EMA-0150 EMA-0200 EMA EMA EMA EMA EMA EMA EMA EMA (11.82) 300 (11.82) 300 (11.82) 300 (11.82) 300 (11.82) 500 (19.9) 500 (19.9) 500 (19.9) 500 (19.9) 500 (19.9) 500 (19.9) 700 (27.5) 800 (31.50) 1000 (39.37) 1000 (39.37) 1200 (47.24) 1200 (47.24) 1500 (59.0) 1500 (59.0) 00 ( (31.50) 1000 (39.37) 1200 (47.24) 1500 (59.0) 800 (31.50) 1000 (39.37) 1200 (47.24) 1500 (59.0) 1000 (39.37)*2 800 (31.50) 1000 (39.37) 1200 (47.24) 1500 (59.0) 1000 (39.37)*2 800 (31.50) 1000 (39.37) 1200 (47.24) 1500 (59.0) 1000 (39.37)* (59.0) 1000 (39.37)* (59.0) 1000 (39.37)* (39.37)* (39.37)* (39.37)* (39.37)*5 294 (11.57) 294 (11.57) 294 (11.57) 294 (11.57) 294 (11.57) 394 (15.51) 394 (15.51) 394 (15.51) 394 (15.51) 394 (15.51) 394 (15.51) 494 (19.45) 494 (19.45) 494 (19.45) 494 (19.45) 494 (19.45) 494 (19.45) 594 (23.39) 594 (23.39) 594 (23.39) 594 (23.39) 594 (23.39) 94 (27.32) 794 (31.25) 994 (39.13) 994 (39.13) 1194 (47.01) 1194 (47.01) 1494 (52.82) 1492 (52.82) 85 (3.35) 85 (3.35) 85 (3.35) 85 (3.35) 85 (3.35) 85 (3.35) 85 (3.35) 85 (3.35) 85 (3.35) 85 (3.35) 85 (3.35) 85 (3.35) 85 (3.35) 554 (21.81) 744 (29.29) 934 (3.77) 1124 (44.25) 1428 (5.22) 554 (21.81) 744 (29.29) 934 (3.77) 1124 (44.25) 1428 (5.22) 934 (3.22)*2 554 (21.81) 744 (29.29) 934 (3.77) 1124 (44.25) 1428 (5.22) 934 (3.22)*2 744 (29.29) 934 (3.77) 1124 (44.25) 1428 (5.22) 934 (3.22)* (5.22) 934 (3.22)* (5.22) 934 (3.22)*2 934 (3.22)*2 934 (3.22)*3 934 (3.22)*3 934 (3.22)* A 1 A 1.2 A 1. A 2.1 A 1.2 A 1.4 A 1.9 A 2.2 A 2.5 A 1.9 A*2 1.2 A 1.5 A 1.7 A 1.9 A 2. A 1.7 A*2 1.5 A 2.2 A 2.4 A 2.4 A 2.2 A*2 2.4 A 2.9 A*2 5 A*2 3.3 A*2 4 A*2 4 A*3.5 A*3.5 A*5 107 kg / 23 lb 143 kg / 315 lb 170 kg / 375 lb 20 kg / 454 lb 238 kg / 525 lb 138 kg / 304 lb 185 kg / 408 lb 230 kg / 507 lb 27 kg / 08 lb 350 kg / 771 lb 40 kg / 1014 lb 170 kg / 375 lb 212 kg / 4 lb 25 kg / 583 lb 318 kg / 99 lb 397 kg / 874 lb 530 kg / 11 lb 254 kg / 50 lb 318 kg / 99 lb 382 kg / 839 lb 477 kg / 1049 lb 3 kg / 1398 lb 55 kg / 1224 lb 848 kg / 18 lb 848 kg / 18 lb 1130 kg / 2487 lb 135 kg / 2984 lb 2035 kg / 447 lb 2543 kg / 5595 lb 2852 kg / 287 lb 01

5 EPA Grinding Finepitch electro-permanent magnetic chuck For versatile clamping on a broad range of workpiece sizes Pole pitch mm Highest uniform clamping force up to 140 N/cm² Electro-permanent magnetic technology with no deformation owing to the rise of temperature Can eliminate residual magnetism from the workpiece Coolant and water proof structure Mono-block housing for maxiumum stability Model Width(B) Length(L) Base Width(B2) Height(H) L1 H1 Net Weight Controller (400V) EPA (19.70) 1000 (39.40) 498 (19.2) 934 (3.77) 25 kg / 583 lb EPA (19.70) 1200 (47.28) 498 (19.2) 1124 (44.25) 318 kg / 99 lb EPA (19.70) 1500 (59.10) 498 (19.2) 1428 (5.22) 397 kg / 874 lb CGD EPA (19.70) 1000 (39.37)*2 498 (19.2) 934 (3.77) 530 kg / 11 lb CGD EPA (23.4) 800 (31.52) 598 (23.5) 744 (30.47) 254 kg / 50 lb EPA (23.4) 1000 (39.40) 598 (23.5) 934 (3.77) 318 kg / 99 lb CGD EPA (23.4) 1200 (47.28) 598 (23.5) 1124 (44.25) 382 kg / 839 lb CGD EPA (23.4) 1500 (59.10) 598 (23.5) 1428 (5.22) 477 kg / 1049 lb CGD EPA (23.4) 1000 (39.37)*2 598 (23.5) 934 (3.77) 3 kg / 1398 lb CGF EPA (23.4) 1100 (43.30)*2 598 (23.5) 1048 (41.2) 740 kg / 131 lb CGF EPA (23.4) 1250 (49.21)*2 598 (23.5) 1184 (4.1) 841 kg / 1854 lb CGF EPA (27.58) 1500 (59.10) 98 (27.50) 1428 (5.22) 477 kg / 1049 lb CGF EPA (29.55) 1500 (59.10) 748 (29.47) 1428 (5.22) 31 kg / 1391 lb CGF 02

6 EPD Grinding Standard pitch electro-permanent magnetic chuck For universal clamping with higher magnetic force Pole pitch 3+15 mm Highest clamping force up to 10 N/cm² Electro-permanent technology with no deformation owing to the rise of the temperature Can eliminate the residual magnetism from the workpiece Solid top plate with high precision Minimum mechanical deformation with solid one-piece housing Model Width (B) Length (L) B2 Height L1 H1 Controller (400V) Net Weight EPD (11.81) 14 (5.75) 237 (9.33) 25 kg / 55 lb EPD (13.78) 14 (5.75) 291 (11.4) 29 kg / 4 lb EPD (5.75) 345 (13.58) 34 kg / 75 lb EPD (17.72) 14 (5.75) 381 (15.00) 38 kg / 84 lb EPD (7.87) 19 (7.72) 345 (13.58) 45 kg / 99 lb EPD (7.87) 450 (15.75) 19 (7.72) 381 (15.00) 51 kg / 112 lb EPD (7.87) 500 (19.9) 19 (7.72) 435 (17.13) 5 kg / 123 lb EPD (9.84) 500 (19.9) 24 (9.9) 435 (17.13) 70 kg / 154 lb EPD (11.81) 29 (11.5) 543 (21.38) 101 kg / 222 lb EPD (31.50) 39 (15.59) 741 (29.17) 179 kg / 394 lb EPD (39.37) 39 (15.59) 939 (3.97) 238 kg / 524 lb EPD (59.05) 39 (15.59) 1443 (5.81) 357 kg / 787 lb EPD (19.9) 800 (31.50) 49 (19.53) 741 (29.17) 238 kg / 524 lb EPD (19.9) 1000 (39.37) 49 (19.53) 939 (3.97) 280 kg / 1 lb EPD (19.9) 1500 (59.05) 49 (19.53) 1443 (5.81) 447 kg / 985 lb EPD (19.9) 1000 (39.37)*2 49 (19.53) 939 (3.97)*2 CGD 50 kg / 1234 lb EPD (31.50) 59 (23.4) 741 (29.17) 29 kg / 592 lb EPD (39.37) 59 (23.4) 939 (3.97) 357 kg / 787 lb EPD (59.05) 59 (23.4) 1443 (5.81) 508 kg / 1120 lb EPD (39.37)*2 59 (23.4) 939 (3.97)*2 CGD 72 kg / 1478 lb 03

7 EME Grinding Micropitch electromagnetic chuck with transverse poles Clamping of transverse placed thin plate shaped workpieces EME with pole pitch mm Highest uniform clamping force up to 120 N/cm² Top plate with micropitch transverse lamination Flux depth of only 4 mm Mono-block housing for maximum stability Model Width Length Base Width Base Length Height L1 H1 Voltage Current Net Weight (B) (L) (B2) (L2) (H) EME-1525 EME-1530 EME-1535 EME-1540 EME-1545 EME-1840 EME-2040 EME-2045 EME-2050 EME-200 EME-2550 EME-250 EME-300 EME-4080 EME (7.09) 200 (7.88) 200 (7.88) 200 (7.88) 200 (7.88) 250 (9.85) 250 (9.85) 300 (11.82) 400 (15.7) 500 (19.70) 250 (9.85) 300 (11.82) 350 (13.79) 400 (15.7) 450 (17.73) 400 (15.7) 400 (15.7) 450 (17.73) 500 (19.70) 00 (23.4) 500 (19.70) 00 (23.4) 00 (23.4) 800 (31.52) 800 (31.52) 148 (5.83) 148 (5.83) 148 (5.83) 148 (5.83) 148 (5.83) 178 (7.01) 198 (7.80) 198 (7.80) 198 (7.80) 198 (7.80) 248 (9.77) 248 (9.77) 298 (11.74) 398 (15.8) 498 (19.2) 270 (10.3) 320 (12.0) 370 (11.57) 420 (1.54) 470 (18.50) 420 (1.54) 420 (1.54) 470 (18.50) 520 (20.47) 20 (24.41) 520 (20.47) 20 (24.41) 20 (24.41) 820 (32.28) 820 (32.28) 214 (8.43) 24 (10.40) 314 (12.37) 34 (14.34) 414 (1.31) 34 (14.34) 34 (14.34) 414 (1.31) 440 (17.34) 554 (21.83) 440 (17.34) 554 (21.83) 554 (21.83) 745 (29.33) 745 (29.33) 0.72 A 0.2 A 0.80 A 0.70 A 1.00 A 0.94 A 1.00 A 1.10 A 1.30 A 1.10 A 1.70 A 1.90 A 1.90 A 2.80 A 3.20 A 19 kg / 42 lb 23 kg / 51 lb 27 kg / 59 lb 31 kg / 8 lb 34 kg / 75 lb 37 kg / 81 lb 41 kg / 90 lb 4 kg / 101 lb 51 kg / 112 lb 1 kg / 134 lb 4 kg / 141 lb 77 kg / 19 lb 94 kg / 207 lb 171 kg / 37 lb 210 kg / 42 lb 04

8 EMV Grinding Micropitch electromagnetic chuck with transverse poles Clamping of transverse placed thin plate shaped workpieces EMV with pole pitch mm Highest uniform clamping force up to 120 N/cm² Top plate with micropitch transverse lamination Flux depth of only 4 mm Mono-block housing for maximum stability Low current with minimum power consumption Model Width Length Base Width Base Length Height L1 H1 Voltage Current Net Weight (B) (L) (B2) (L2) (H) EMV-1525 EMV-1530 EMV-1535 EMV-1540 EMV-1545 EMV-1840 EMV-2040 EMV-2045 EMV-2050 EMV-200 EMV-2550 EMV-250 EMV-300 EMV-4080 EMV (7.09) 200 (7.88) 200 (7.88) 200 (7.88) 200 (7.88) 250 (9.85) 250 (9.85) 300 (11.82) 400 (15.7) 500 (19.70) 250 (9.85) 300 (11.82) 350 (13.79) 400 (15.7) 450 (17.73) 400 (15.7) 400 (15.7) 450 (17.73) 500 (19.70) 00 (23.4) 500 (19.70) 00 (23.4) 00 (23.4) 800 (31.52) 800 (31.52) 148 (5.83) 148 (5.83) 148 (5.83) 148 (5.83) 148 (5.83) 178 (7.01) 198 (7.80) 198 (7.80) 198 (7.80) 198 (7.80) 248 (9.77) 248 (9.77) 298 (11.74) 398 (15.8) 498 (19.2) 270 (10.3) 320 (12.0) 370 (11.57) 420 (1.54) 470 (18.50) 420 (1.54) 420 (1.54) 470 (18.50) 520 (20.47) 20 (24.41) 520 (20.47) 20 (24.41) 20 (24.41) 820 (32.28) 820 (32.28) 110 (4.33) 110 (4.33) 110 (4.33) 110 (4.33) 110 (4.33) 110 (4.33) 110 (4.33) 110 (4.33) 110 (4.33) 110 (4.33) 110 (4.33) 110 (4.33) 110 (4.33) 110 (4.33) 110 (4.33) 214 (8.43) 24 (10.40) 314 (12.37) 34 (14.34) 414 (1.31) 34 (14.34) 34 (14.34) 414 (1.31) 440 (17.34) 554 (21.83) 440 (17.34) 554 (21.83) 554 (21.83) 745 (29.33) 745 (29.33) 0.40 A 0.3 A 0.48 A 0.42 A 0.0 A 0.55 A 0.0 A 0. A 0.78 A 0. A 1.00 A 1.14 A 1.14 A 1.70 A 1.90 A 30 kg / lb 3 kg / 79 lb 42 kg / 92 lb 52 kg / 114 lb 55 kg / 121 lb 58 kg / 127 lb kg / 145 lb 7 kg / 17 lb 82 kg / 180 lb 98 kg / 21 lb 102 kg / 224 lb 123 kg / 271 lb 15 kg / 343 lb 22 kg / 577 lb 328 kg / 723 lb 05

9 EPB Grinding Mircopitch electro-permanent magnetic chuck with transverse poles Clamping of transverse placed thin plate shaped workpieces EPB with pole pitch 1+3 mm Highest uniform clamping force up to 120 N/cm² Electro-permanent technology with no deformation owing to the rise of temperature Can eliminate residual magnetism from the workpiece Coolant and water proof structure Minimum mechanical deformation with solid one-piece housing Model Width Length Base Width Height L1 H1 Net Weight Controller Controller (B) (L) (B2) (H) (400V) (220V) EPB-1525 EPB-1530 EPB-1535 EPB-1540 EPB-1545 EPB-1840 EPB-2040 EPB-2045 EPB-2050 EPB-200 EPB-2550 EPB-250 EPB-300 EPB-3080 EPB EPB EPB-400 EPB (7.09) 200 (7.88) 200 (7.88) 200 (7.88) 200 (7.88) 250 (9.85) 250 (9.85) 300 (11.82) 300 (11.82) 300 (11.82) 300 (11.82) 400 (15.7) 400 (15.7) 250 (9.85) 300 (11.82) 350 (13.79) 400 (15.7) 450 (17.73) 400 (15.7) 400 (15.7) 450 (17.73) 500 (19.70) 00 (23.4) 500 (19.70) 00 (23.4) 00 (23.4) 800 (31.52) 1000 (39.40) 1200 (47.28) 00 (23.4) 800 (31.52) 148 (5.83) 148 (5.83) 148 (5.83) 148 (5.83) 148 (5.83) 178 (7.01) 198 (7.80) 198 (7.80) 198 (7.80) 198 (7.80) 248 (9.77) 248 (9.77) 298 (11.74) 298 (11.74) 298 (11.74) 298 (11.74) 398 (15.8) 398 (15.8) 214 (8.43) 24 (10.40) 314 (12.37) 34 (14.34) 414 (1.31) 34 (14.34) 34 (14.34) 414 (1.31) 44 (18.27) 54 (22.20) 44 (18.27) 54 (22.20) 54 (22.20) 74 (30.08) 94 (37.95) 114 (45.83) 54 (22.20) 74 (30.08) 21 kg / 4 lb 25 kg / 55 lb 29 kg / 4 lb 3 kg / 79 lb 38 kg / 84 lb 40 kg / 88 lb 45 kg / 99 lb 52 kg / 114 lb 5 kg / 123 lb 7 kg / 148 lb 70 kg / 154 lb 84 kg / 185 lb 107 kg / 23 lb 143 kg / 315 lb 170 kg / 375 lb 20 kg / 454 lb 134 kg / 295 lb 238 kg / 525 lb 0

10 EMM Grinding micropitch electromagnetic chuck with longitudinal poles Clamping of longitudinal placed thin plate shaped workpieces EMM with pole pitch 1+3 mm Highest uniform clamping force up to 120 N/cm² Top plate with micropitch longitudinal lamination Full surface magnetic power Low magnetic field height of only 4 mm Minimum mechanical deformation with solid one-piece housing Low current with minimum power consumption Model Width(B) Length(L) B2 L2 Height(H) B1 H1 Voltage Current Net Weight EMM (11.81) 148 (5.83) 330 (12.99) 117 (4.1) V 0. A 23 kg / 51 lb EMM (13.78) 148 (5.83) 380 (14.9) 117 (4.1) V 0.7 A 27 kg / 59 lb EMM (5.83) 430 (1.93) 117 (4.1) V 0.8 A 31 kg / 8 lb EMM (17.72) 148 (5.83) 480 (18.90) 117 (4.1) V 0.9 A 34 kg / 75 lb EMM (7.87) 198 (7.80) 430 (1.93) 15 (.50) V 1.0 A 41 kg / 90 lb EMM (7.87) 450 (17.72) 198 (7.80) 480 (18.90) 15 (.50) V 1.2 A 4 kg / 101 lb EMM (7.87) 500 (19.9) 198 (7.80) 530 (20.87) 15 (.50) V 1.5 A 51 kg / 112 lb EMM (9.84) 500 (19.9) 248 (9.7) 530 (20.87) 214 (8.43) V 1.7 A 4 kg / 141 lb EMM (11.81) 298 (11.73) 30 (24.80) 20 (10.24) V 1.9 A 94 kg / 207 lb EMM (31.50) 398 (15.7) 830 (32.8) 354 (13.94) V 2.8 A 171 kg / 37 lb 07

11 EPM Grinding Micropitch electro-permanent magnetic chuck with longitudinal poles Clamping of longitudinal placed thin plate shaped workpieces EPM with pole pitch 1+3 mm Highest uniform clamping force up to 120 N/cm² Electro-permanent magnetic technology with no deformation owing to the rise of temperature Top plate with micropitch longitudinal lamination Full surface magnetic power Minimum mechanical deformation with solid one-piece housing Controller Controller Model Width(B) Length(L) B2 L2 Height(H) B1 H1 (400V) (220V) Net Weight EPM (11.81) 148 (5.83) 330 (12.99) 117 (4.1) 23 kg / 51 lb EPM (13.78) 148 (5.83) 380 (14.9) 117 (4.1) 27 kg / 59 lb EPM (5.83) 430 (1.93) 117 (4.1) 31 kg / 8 lb EPM (17.72) 148 (5.83) 480 (18.90) 117 (4.1) 34 kg / 75 lb EPM (7.87) 198 (7.80) 430 (1.93) 15 (.50) 41 kg / 90 lb EPM (7.87) 450 (17.72) 198 (7.80) 480 (18.90) 15 (.50) 4 kg / 101 lb EPM (7.87) 500 (19.9) 198 (7.80) 530 (20.87) 15 (.50) 51 kg / 112 lb EPM (9.84) 500 (19.9) 248 (9.7) 530 (20.87) 214 (8.43) 4 kg / 141 lb EPM (11.81) 298 (11.73) 30 (24.80) 20 (10.24) 94 kg / 207 lb EPM (31.50) 398 (15.7) 830 (32.8) 354 (13.94) 171 kg / 37 lb 08

12 EPS Grinding Square pole electro-permanent magnetic chuck with standard density Clamping for grinding of medium to large work pieces Full metallic surface, no resin, coolant and water proof Square pole size 50x50 mm Magnetic force higher than 200 kg per pole Electro-permanent magnetic technology with no deformation owing to the rise of temperature Distortion free clamping with auto-shim pole extensions No residual magnetism Workpiece larger than the table size are possible Multiple magnet combinations can provide clamping for larger sizes Magnetic flux depth 12.5 mm ES-5052 Fix pole extensions ET-5052 Mobile pole extensions ES fixed and ET self shimming pole extensions using the built in threaded rod which does not require tools to install or remove. mm The new and improved ET pole extension has increased the performance of the original ET by 20%. Total adjustment is mm. Workpiece Mobile pole extension (auto-shim pole) No forced deformation when clamped Fixed pole extension Chuck Model Width Length Height Pole No. Controller (400/480V) Controller (220V) Net Weight EPS (11.82) 490 (19.29) 59 (2.32) kg / 15 lb EPS (11.82) 40 (25.20) 59 (2.32) kg / 21 lb EPS (14.17) 490 (19.29) 59 (2.32) kg / 172 lb EPS (14.17) 40 (25.20) 59 (2.32) kg / 222 lb EPS (14.17) 790 (31.10) 59 (2.32) kg / 27 lb EPS (1.54) 790 (31.10) 59 (2.32) 0 CGD 14 kg / 322 lb EPS (18.90) 940 (37.00) 59 (2.32) 84 CGD 199 kg / 439 lb EPS (18.90) 1090 (42.91) 59 (2.32) 98 CGD CGD 230 kg / 507 lb EPS (21.2) 940 (37.00) 59 (2.32) 9 CGD CGD 258 kg / 59 lb EPS (21.2) 1090 (42.91) 59 (2.32) 112 CGD CGD 300 kg / 1 lb EPS (54.72) 59 (2.32) 12 CGD CGF 37 kg / 809 lb EPS (0.3) 59 (2.32) 180 CGF CGF 407 kg / 897lb EPS (25.98) 1390 (54.72) 59 (2.32) 170 CGF CGF 404 kg / 899lb EPS (25.98) 1540 (0.3) 59 (2.32) 188 CGF CGF 450 kg / 992lb 09

13 EPN H W L Grinding Full metallic electro-permanent magnetic chuck Clamping for grinding of small or thin work pieces Full metallic surface, no resin, coolant and water proof Highest clamping force up to 120 N/cm² Electro-permanent magnetic technology with no deformation owing to the rise of temperature No residual magnetism Workpiece larger than the table size are possible Multiple magnet combinations can provide clamping for larger sizes Magnetic flux depth 10 mm Model Width Length Height Pole No. Controller (400) Net Weight EPN (8.27) 415 (1.34) 40 (1.57) 50 2 kg / 57 lb EPN (8.27) 452 (17.80) 40 (1.57) kg / 2 lb EPN (8.27) 489 (19.25) 40 (1.57) 0 30 kg / lb EPN (8.27) 52 (20.71) 40 (1.57) 5 33 kg / 73 lb EPN (8.27) 53 (22.17) 40 (1.57) kg / 77 lb EPN (8.27) 40 (1.57) kg / 82 lb EPN (9.72) 489 (19.25) 40 (1.57) 72 3 kg / 79 lb EPN (9.72) 52 (20.71) 40 (1.57) kg / 85 lb EPN (9.72) 53 (22.17) 40 (1.57) kg / 93 lb EPN (9.72) 40 (1.57) kg / 97 lb EPN (11.18) 52 (20.71) 40 (1.57) kg / 98 lb EPN (11.18) 53 (22.17) 40 (1.57) kg / 105 lb EPN (11.18) 40 (1.57) kg / 112 lb EPN (12.4) 53 (22.17) 40 (1.57) kg / 119 lb EPN (12.4) 40 (1.57) kg / 127 lb 10

14 PMF L + 5 L1 Grinding H1 B G F H EDM Permanent magnetic chuck General purpose low profile grinding magnet PMF with pole pitch mm Highest uniform magnetic clamping force up to 120 N/cm² Coolant and water proof structure Easy to activate and de-activate High precision with no residual magnetism Model Width(B) Length(L) Height(H) L1 H1 F G Net Weight PMF-0713 PMF PMF-1025 PMF-1325 PMF-1340 PMF-142 PMF-1515 PMF-1525 PMF-1530 PMF-1535 PMF-1540 PMF-1545 PMF-2030 PMF-2035 PMF-2040 PMF-2045 PMF-2050 PMF-200 PMF-203 PMF-2535 PMF-2540 PMF-2550 PMF-253 PMF-3030 PMF-3040 PMF-3050 PMF-300 PMF-303 PMF (2.7) 100 (3.94) 100 (3.94) 130 (5.12) 130 (5.12) 140 (5.52) 150 (5.90) 200 (7.88) 200 (7.88) 200 (7.88) 200 (7.88) 200 (7.88) 200 (7.88) 200 (7.88) 250 (9.85) 250 (9.85) 250 (9.85) 250 (9.85) 300 (11.82) 300 (11.82) 300 (11.82) 300 (11.82) 300 (11.82) 400 (15.7) 130 (5.12) 175 (.90) 250 (9.84) 255 (10.03) 20 (10.24) 250 (9.84) 300 (11.81) 350 (13.78) 450 (17.72) 300 (11.81) 350 (13.78) 450 (17.72) 500 (19.9) 30 (24.80) 350 (13.79) 400 (15.7) 500 (19.70) 30 (24.82) 300 (11.82) 400 (15.7) 500 (19.70) 00 (23.4) 30 (24.82) 00 (23.4) 49 (1.93) 49 (1.93) 49 (1.93) 49 (1.93) 49 (1.93) 51 (2.01) 51 (2.02) 51 (2.01) 51 (2.01) 51 (2.01) 51 (2.01) 51 (2.01) 51 (2.01) 51 (2.01) 51 (2.01) 51 (2.01) 51 (2.01) 51 (2.01) 51 (2.01) 5 (2.20) 5 (2.20) 5 (2.20) 5 (2.20) 5 (2.20) 5 (2.20) 5 (2.20) 5 (2.20) 5 (2.20) 5 (2.20) 101 (3.98) 140 (5.51) 20 (8.11) 20 (8.11) 357 (14.0) 21 (8.50) 108 (4.25) 20 (8.11) 257 (10.12) 305 (12.01) 357 (14.0) 407 (17.34) 257 (10.12) 305 (12.01) 357 (14.0) 407 (17.34) 454 (17.87) 55 (21.89) 58 (23.07) 305 (12.01) 357 (14.0) 454 (17.87) 58 (23.07) 257 (10.12) 357 (14.0) 454 (17.87) 55 (21.89) 58 (23.07) 55 (21.89) 22 (0.87) 23 (0.87) 24 (0.87) 25 (0.87) 2 (0.87) 27 (0.87) 28 (0.87) 29 (0.87) 30 (0.87) 31 (0.87) 3 kg / 8 lb 7 kg / 15 lb 10 kg / 21 lb 12 kg / 27 lb 20 kg / 44 lb 14 kg / 32 lb 9 kg / 20 lb 15 kg / 33 lb 18 kg / 39 lb 21 kg / 4 lb 24 kg / 53 lb 27 kg / 59 lb 24 kg / 53 lb 28 kg / 1 lb 32 kg / 70 lb 3 kg / 79 lb 40 kg / 88 lb 48 kg / 105 lb 50 kg / 110 lb 38 kg / 84 lb 44 kg / 9 lb 55 kg / 120 lb 9 kg / 151 lb 3 kg / 79 lb 52 kg / 115 lb kg / 144 lb 79 kg / 173 lb 83 kg / 182 lb 10 kg / 233 lb 11

15 PMT Grinding EDM Permanent magnetic low profile chuck For spark erosion and precision grinding of small and thin workpieces Pole pitch mm Max. magnetic clamping force up to 120 N/cm² Low profile with activation from top surface Suitable for adaption on zero reference system Low flux depth of mm and no residual magnetism EDM can be performed close to surface without magnetic interference Model PMT-0713 Width(B) 70 (2.7) Length(L) 130 (5.12) Base Length(L2) 140 (5.51) Height(H) 32 (1.2) L1 7(2.4) Net Weight 4 kg / 9 Ib PMT (3.94) 175 (.89) 185 (7.28) 32 (1.2) 117(4.1) 5 kg / 11 Ib PMT (5.12) 250 (9.84) 20 (10.24) 35 (1.38) 192 (7.5) 9 kg / 20 Ib PMT (.30) 35 (1.38) 92(3.2) kg / 13 Ib PMT (9.84) 20 (10.24) 35 (1.38) 192 (7.5) 10 kg / 22 Ib PMT (11.81) 310 (12.20) 35 (1.38) 242 (9.53) 12 kg / 2 Ib PMT (13.78) 30 (14.17) 35 (1.38) 292 (11.50) 14 kg / 31 Ib PMT (17.72) 40 (18.11) 35 (1.38) 392 (15.43) 18 kg / 40 Ib PMT (7.87) 300 (11.81) 310 (12.20) 35 (1.38) 242 (9.53) 1 kg / 35 Ib PMT (7.87) 410 (1.14) 35 (1.38) 342 (13.4) 23 kg / 51Ib PMT (7.87) 500 (19.9) 510 (20.08) 35 (1.38) 442 (17.40) 27 kg / 59 Ib PMT (9.84) 350 (13.78) 30 (14.17) 35 (1.38) 292 (11.50) 24 kg / 53 Ib PMT (11.81) 300 (11.81) 310 (12.20) 35 (1.38) 242 (9.53) 24 kg / 53 Ib PMT (11.81) 410 (1.14) 35 (1.38) 342 (13.4) 32 kg / 70 Ib 12

16 PMA Grinding Precision sine table chuck Clamping for grinding,edm and measuring angle accuracy and quality Pole pitch mm Highest clamping force up to 120 N/cm² Single piece,hardened (HRC0), precision ground base offering extreme rigidity Stable locking of chuck by means of bearing covers and slotted link at the side Maximum angular accuracy: ±5" Parallelism: ±0.002 mm / 100 mm Angle range: 0-45 Model Weight (B) Length (L) Base Width (B2) Base Length (L2) Height (H) L1 H1 D Net Weight PMA (2.7) 130 (5.12) 81 (3.19) 171 (.73) 84 (3.31) 101 (3.98) 48 (1.89) 50 (1.97) 5 kg / 11 lb PMA (3.94) 175 (.89) 115 (4.53) 21 (8.50) 84 (3.31) 140 (5.51) 48 (1.89) 10 kg / 22 lb PMA (5.12) 250 (9.84) 141 (5.55) 311 (12.24) 84 (3.31) 20 (8.11) 48 (1.89) 100 (3.94) 19 kg / 42 lb PMA (.34) 191 (7.52) 84 (3.31) 108 (4.25) 48 (1.89) 13 kg / 29 lb PMA (9.84) 11 (.34) 311 (12.24) 84 (3.31) 20 (8.11) 48 (1.89) 22 kg / 48 lb PMA (11.81) 11 (.34) 31 (14.21) 84 (3.31) 257 (10.12) 48 (1.89) 2 kg / 57 lb PMA (13.78) 11 (.34) 411 (1.18) 84 (3.31) 305 (12.01) 48 (1.89) 30 kg / lb PMA (.34) 41 (18.15) 84 (3.31) 357 (14.0) 48 (1.89) 35 kg / 77 lb 13

17 EMK Grinding Standard pitch electromagnetic chuck Clamping for knife grinding Pole pitch 3+1 mm Highest clamping force up to 150 N/cm² Solid top plate with high precision Real magnetic poles Minimum mechanical deformation with solid one-piece housing Low current with minimum power consumption Model Width (B) Length (L) Height (H) L1 H1 Voltage Current Net Weight EMK (5.04) 5 (2.18) 9 (3.78) 574 (22.0) 21 (083) V 0.9A 1 kg / 133 lb EMK (.30) 100 (2.99) 1542 (0.71) 30 (1.18) V 1.0A 285 kg / 2 lb EMK (7.09) 100 (2.99) 1542 (0.71) 30 (1.18) V 1.1A 320 kg / 704 lb EMK (7.87) 1000 (39.37) 934 (3.77) 30 (1.18) V 1.1A 223 kg / 491 lb EMK (7.87) 1500 (59.0) 1433 (5.42) 30 (1.18) V 1.2A 333 kg / 734 lb EMK (7.87) 1800 (70.87) 1732 (8.19) 30 (1.18) V 1.5A 400 kg / 880 lb 14

18 EPZ Grinding Standard pitch electro-permanent magnetic chuck Clamping for knife grinding Pole pitch 3+1 mm Highest clamping force up to 150 N/cm² Electro-permanent magnetic technology with no deformation owing to the rise of temperature Solid top plate with high precision Real magnetic poles Minimum mechanical deformation with solid one-piece housing Model Width (B) Length (L) Height (H) L1 H1 Net Weight Controller(400V) EPZ (5.04) 5 (2.18) 9 (3.78) 574 (22.0) 21 (083) 1 kg / 133 lb EPZ (.30) 100 (2.99) 1542 (0.71) 30 (1.18) 285 kg / 2 lb EPZ (7.09) 100 (2.99) 1542 (0.71) 30 (1.18) 320 kg / 704 lb EPZ (7.87) 1000 (39.37) 934 (3.77) 30 (1.18) 223 kg / 491 lb EPZ (7.87) 1500 (59.0) 1433 (5.42) 30 (1.18) 333 kg / 734 lb EPZ (7.87) 1800 (70.87) 1732 (8.19) 30 (1.18) 400 kg / 880 lb 15

19 PPN / PPA PPN H W1 PALLET Pallet chuck Clamping for heavy machining for medium to large work pieces Square pole size 50x50 mm Magnetic force higher than 350 kg per pole Electro-permanent technology with no deformation owing to the rise of temperature Distortion free clamping with auto-shim pole extensions No residual magnetism Controlled flux prevents magnetization of the tool Wokpiece larger than the table size are machinable L2 L1 W L Pallet Model Width Length Height W1 L1 L2 Net Weight PPN (12.0) 320 (12.0) 38 (1.50) 35 (1.38) 35 (1.38) 30 (1.18) x kg / lb PPA H W PALLET Pallet chuck L L1 For zero point clamping systems Aluminium housing Pole pitch 5+3 mm Two switchable sections Max magnetic clamping force up to 10 N/cm² Low magnetic flux Model Width Length Height L1 Net Weight PPA-2424 PPA-2828 PPA ( ( ( (9.45) 280 (11.02) 320 (12.0) 0 (2.3) 0 (2.3) 0 (2.3) 174 (.85) 214 (8.43) 254 (10) 19.5 kg / 43 lb 22 kg / 49 lb 2 kg / 57 lb 1

20 PPC / PPM PPC H L1 D B E Pallet PALLET Pallet chuck Clamping for palletizing system Pole pitch mm Max magnetic clamping force up to 120 N/cm² No residual magnetism High precison and low flux depth mm Very light switching force High accuracy guaranteed through entire service life L Model Width Length Height L1 D E Net Weight PPC-2424/ (9.45) 240 (9.45) 40 (1.57) 197 (7.7) 130 (5.12) 40 (1.57) 1 kg / 35 lb PPC-2828/ (11.02) 280 (11.02) 40 (1.57) 237 (9.33) 130 (5.12) 40 (1.57) 22 kg / 48 lb PPC-3232/ (12.0) 320 (12.0) 40 (1.57) 279 (10.98) 130 (5.12) 40 (1.57) 28 kg / 2 lb PPM H L1 D B E PALLET L Pallet chuck Clamping for palletizing system Pole pitch 4+11 mm Max. Magnetic clamping force up to 180 N/cm² No residual magnetism Strong clamping force with low flux depth 12 mm Easy to activate and de-activate High accuracy guaranteed through entire service life Model Width Length Height L1 D E Net Weight PPM (9.45) 240 (9.45) 48 (1.89) 184 (7.24) 130 (5.12) 40 (1.57) 19 kg / 42 lb PPM (11.02) 280 (11.02) 48 (1.89) 214 (8.43) 130 (5.12) 40 (1.57) 20 kg / 57 lb PPM (12.0) 320 (12.0) 48 (1.89) 259 (10.20) 130 (5.12) 40 (1.57) 35 kg / 77 lb 17

21 EMI Milling MILLING Powerful electromagnetic chuck Clamping for heavy machining operation Highest clamping force up to 180 N/cm² Can eliminate residual magnetism Coolant and water proof structure Solid top plate with high precision and real magnetic poles Minimum mechanical deformation with solid one-piece housing Low current with minimum power consumption Model Width (B) Length (L) Height (H) B2 L2 Voltage Current Net Weight EMI (11.81) 85 (3.35) 298 (11.73) 20 (24.41) 1.5 A 120 kg / 24 lb EMI (11.81) 900 (35.43) 85 (3.35) 298 (11.73) 920 (3.22) 2.1 A 180 kg / 39 lb EMI (31.50) 85 (3.35) 398 (15.7) 820 (32.28) 2.5 A 213 kg / 49 lb EMI (39.37) 85 (3.35) 398 (15.7) 1020 (40.1) 3.1 A 2 kg / 585 lb EMI (19.9) 1000 (39.37) 85 (3.35) 498 (19.1) 1020 (40.1) 3.9 A 333 kg / 733 lb EMI (19.9) 1500 (59.0) 85 (3.35) 498 (19.1) 1520 (59.84) 5.8 A 500 kg / 1100 lb EMI (39.37) 85 (3.35) 598 (23.54) 1020 (40.1) 4.7 A 400 kg / 800 lb EMI (59.0) 85 (3.35) 598 (23.54) 1520 (59.84) 7.0 A 00 kg / 1320 lb EMI (27.5) 1500 (59.0) 85 (3.35) 98 (27.48) 1520 (59.84) 7.7 A 700 kg / 1540 lb 18

22 PSP Square pole electro-permanent magnetic chuck with standard density Milling Clamping for heavy machining for medium to large work pieces Square pole size 50x50 mm Magnetic force higher than 350 kg per pole Electro-permanent technology with no deformation owing to the rise of temperature Distortion free clamping with auto-shim pole extensions No residual magnetism Controlled flux prevents magnetization of the tool Flux depth 12 mm Wokpiece larger than the table size are machinable Multiple magnet combinations can provide clamping for any table size, large or small MILLING Model Width Length Height Pole No. Net Weight Controller (220V) Controller (220/480V) Controller (400/480V) PSP (14.17) 340 (13.39) 59 ( kg / 123 lb CUA CUA-CP CUA PSP (14.17) 490 (19.29) 59 ( kg / 180 lb CUA CUA-CP CUA PSP (14.17) 40 (25.20) 59 ( kg / 235 lb CUA CUA-CP CUA PSP (14.17) 790 (31.10) 59 ( kg / 293 lb CUA CUD-CP CUA PSP (1.54) 40 (25.20) 59 ( kg / 277 lb CUA CUD-CP CUA PSP (1.54) 790 (31.10) 59 ( kg / 343 lb CUD CUD-CP CUA PSP (1.54) 940 (37.01) 59 ( kg / 410 lb CUD CUD-CP CUA PSP (1.54) 1090 (42.91) 59 ( kg / 473 lb CUD CUA PSP (18.90) 40 (25.20) 59 ( kg / 317 lb CUA CUD-CP CUA PSP (18.90) 790 (31.10) 59 ( kg / 392 lb CUD CUD-CP CUA PSP (18.90) 940 (37.01) 59 ( kg / 47 lb CUD CUA PSP (18.90) 1090 (42.91) 59 ( kg / 542 lb CUD CUD PSP (25.20) 59 ( kg / 39 lb CUD CUD-CP CUA PSP (31.10) 59 ( kg / 491 lb CUD CUD PSP (37.01) 59 ( kg / 584 lb CUD CUD PSP (42.91) 59 ( kg / 79 lb CUD 19

23 Pole Extension Fix pole extensions Auto-shim pole extensions EW EX ES EV ET Milling EV x50 mm fix pole extension with height 20 mm EW x50 mm fix pole extension with height 20 mm and step EX x50 mm fix pole extension with height 20 mm and step ES-5052 Diameter 50 mm autoshim pole extension with height 52 mm ET-5052 Diameter 50 mm autoshim pole extension with height 52 mm EE x50 mm fix pole extension with height 20 mm and step EA x50 mm fix pole extension with height 20 mm EA x50 mm fix pole extension with height 50 mm EC x50 mm auto-shim pole extension with height 50 mm ES-5052 Fix pole extensions ET-5052 Mobile pole extensions ES fixed and ET self shimming pole extensions using the built in threaded rod which does not require tools to install or remove. mm The new and improved ET pole extension has increased the performance of the original ET by 20%. Total adjustment is mm. Workpiece Mobile pole extension (auto-shim pole) No deformation when clamped Fixed pole extension Chuck 20

24 PRP Square pole electro-permanent magnetic chuck with standard density Milling Clamping for heavy machining for medium to large work pieces Square pole size 50x50 mm Magnetic force higher than 350 kg per pole Electro-permanent technology with no deformation owing to the rise of temperature Distortion free clamping with auto-shim pole extensions No residual magnetism Controlled flux prevents magnetization of the tool Flux depth 12 mm Wokpiece larger than the table size are machinable MILLING Model Diameter Height Pole No. Net Weight Controller (220V) Controller (400/480V) PRP (1.77) kg / 92. lb CUA CUA PRP (19.9) 45 (1.77) 32 kg / lb CUA CUA PRP (1.77) kg / lb CUA CUA PRP (27.5) 45 (1.77) kg / 28. lb CUD CUA PRP (31.50) 45 (1.77) kg / lb CUD CUD PRP (35.43) 45 (1.77) kg / lb CUF CUD PRP (39.37) 45 (1.77) kg / lb CUF CUD 21

25 PMM Milling MILLING Permanent magnetic chuck for milling Clamping for heavy machining operation Pole pitch 4+11 mm Max. magnetic clamping force up to 180 N/cm² Highly concentrated magnetic field with low flux depth mm Low flux depth prevents magnetization of the tooling Coolant and water proof structure Easy to activate and de-activate High precision with no residual magnetism Model Width Length Effective Length Height H1 Net Weight PMM (9.84) 199 (7.83) 0 (2.3) 23 (0.91) 17 kg / 37 Ib PMM (11.81) 259 (10.20) 0 (2.3) 23 (0.91) 20 kg / 44 Ib PMM (13.78) 304 (11.97) 0 (2.3) 23 (0.91) 24 kg / 53 Ib PMM (17.72) 409 (1.10) 0 (2.3) 23 (0.91) 31 kg / 8 Ib PMM (7.87) 300 (11.81) 259 (10.20) 0 (2.3) 23 (0.91) 29 kg / 4 Ib PMM (7.87) 349 (13.74) 0 (2.3) 23 (0.91) 37 kg / 81 Ib PMM (7.87) 450 (17.72) 409 (1.10) 0 (2.3) 23 (0.91) 41 kg / 90 Ib PMM (7.87) 500 (19.9) 454 (17.84) 0 (2.3) 23 (0.91) 4 kg / 101 Ib PMM (7.87) 559 (22.01) 0 (2.3) 23 (0.91) 55 kg / 121 Ib PMM (9.84) 300 (11.81) 259 (10.20) 0 (2.3) 23 (0.91) 35 kg / 77 Ib PMM (9.84) 350 (13.78) 304 (11.97) 0 (2.3) 23 (0.91) 41 kg / 90 Ib PMM (9.84) 349 (13.74) 0 (2.3) 23 (0.91) 47 kg / 103 Ib PMM (9.84) 450 (17.72) 409 (1.10) 0 (2.3) 23 (0.91) 52 kg / 342 Ib PMM (11.81) 300 (11.81) 259 (10.20) 0 (2.3) 23 (0.91) 39 kg / 8 Ib PMM (11.81) 349 (13.74) 0 (2.3) 23 (0.91) 52 kg / 114 Ib PMM (11.81) 500 (19.9) 459 (18.07) 0 (2.3) 23 (0.91) 5 kg / 143 Ib PMM (11.81) 559 (22.01) 0 (2.3) 23 (0.91) 80 kg / 17 Ib PMM (13.74) 0 (2.3) 23 (0.91) 71 kg / 15 Ib 22

26 PZP Milling PZP-A PZP-B PZP-C Electro-permanent magnetic module with double sided clamping surfaces Clamping for heavy machining for medium to large work pieces With double sided clamping surfaces Can be self-clamped on the machine table Top surface clamping and bottom surface clamping can be controled by different channels Channel 1 for top surface clamping, Channel 2 for bottom surface clamping Square pole size 70x70 mm Magnetic force higher than 90 kg per pole With no deformation owing to the rise of the temperature No residual magnetism Wokpiece larger than the table size are machinable Multiple magnet combinations can provide clamping for any table size PZP-A PZP-A Top side up Bottom side up CUT-A with channel selection function Channel 1 for top, Channel 2 for bottom PZP-B Application 1 Work piece Machine table PZP-C Application 2 Work piece Machine table 23 Model Width Length Heigh Pole No. Net Weight Control Unit Clamping Force (220 / 400V) per side PZP-A PZP-B PZP-C 10 (.29) 240 (9.44) 10 (.29) 240 (9.44) 240 (9.44) 400 (15.74) 110 (4.33) 110 (4.33) 110 (4.33) 2 x 2 4 x 2 4 x 2 33 kg / 2 lb 49 kg / 2 lb 59 kg / 2 lb CUT-A CUT-A CUT-A 13.8 kn 27. kn 27. kn

27 PCC Electro-permanent magnetic chuck Clamping for heavy machining for medium to large work pieces Discharge connector MILLING Joint connector Square pole size 50x50 mm Magnetic force higher than 350 kg per pole Electro-permanent technology with no deformation owing to the rise of the temperature Distortion free clamping with auto-shim pole extensions No residual magnetism Controlled flux prevents magnetization of the tool Wokpiece larger than the table size are machinable Multiple magnet combinations can provide clamping for any table size, large or small Length of connection cable can be made to order Milling PCC-A* + CUA PCC-A PCC-B PCC-C PCC-D PCC-E PCC-B* + CUA PCC-C*5 + CUA PCC-D*5 + CUA PCC-E*4 + CUA Model Width Length Heigh Pole No. Max Plate No. Net Weight Control Unit Clamping Force PCC-A 174 (.85) 30 (14.17) 59 (2.32) kg / 53 lb CUA 35 kn PCC-B 174 (.85) 420 (1.54) 59 (2.32) kg / 73 lb CUA 42 kn PCC-C 174 (.85) 480 (18.90) 59 (2.32) kg / 84 lb CUA 49 kn PCC-D 174 (.85) 540 (21.2) 59 (2.32) kg / 95 lb CUA 5 kn PCC-E 174 (.85) 59 (2.32) kg / 10 lb CUA 3 kn 24

28 PCC Application A Work piece Milling Discharge cable DXA Can be used next to each other Application B Connection cable DXH Machine table Work piece Can be used with space in between Machine table Application C Channel 1 Work piece Channel 2 Can bolt-together two PCC and make it two clamping surface seperately Machine table Extension cable Large workpiece Extension cable DXF Model Cable length Space between chucks Description DXH (11.8) 0-50 (0-1.9) connection cable DXH (39.4) 0-00 (0-23.2) connection cable Model Cable length Description DXF (39.4) extension cable DXF (118.1) extension cable DXA (19.9) discharge cable DXA (393.7) discharge cable Different length cable is available upon request. 25

29 EPK B1 H H1 L Milling MILLING B Rail milling magnetic clamping system Clamping for machining on rail crossings and switches Highest clamping force up to 18t/m No electricity needed for the system when machining Strong and uniform clamping, no vibrations when machining Quick clamping with high efficiency Complete machining in one set up Without stray magnetic fields and no magnetization of the tool Modules can be used jointly Model Width(B) Length(L) Height(H) H1 B1 Net Weight EPK (45.7) 28 (10.55) 134 (5.28) 240 (9.45) 734 kg / 11 lb 2

30 PFD L L1 L2 EDM B H EDM Permanent magnetic chuck Clamping device for holding workpieces securely on spark erosion machines (EDM) or other machining applications, or as part of a fixture. Two clamping surfaces on opposite and individually switchable PFD with pole pitch mm Max. magnetic uniform clamping force up to 120 N/cm² Easy to activate and de-activate Coolant and water proof structure High precision and no residual magnetism Can be supplied in pairs Model Width(B) Length(L) Height(H) L1 L2 P Net Weight PFD (2.05) 0 (2.3) 99 (3.90) kg /. Ib PFD (2.05) 180 (7.09) 0 (2.3) (.00) 11 (0.43) kg / 9.3 Ib PFD (2.05) 250 (9.84) 0 (2.3) (8.84) 11 (0.43) kg / 12.8 Ib Workpiece PFD Machine table 27

31 MBF L1 P B H L EDM EDM Permanent magnetic chuck Angular and parallel EDM of small and medium-sized workpieces Robust construction with good holding force Pole pitch 2 mm bass / 2 mm steel Nominal holding force standard: 50 N/cm² Nominal holding force stainless 30 N/cm² Magnetic field height : 2 mm Polar plate re-grind of 4 mm Stainless, chrome steel polar plates available for use in wire EDM Model Width(B) Length(L) Height(H) L1 P Net Weight MBF (2.52) 140 (5.51) 4 (2.52) 115 (4.53) kg /. Ib MBF-10 4 (2.52) 10 (.30) 4 (2.52) 135 (5.31) kg / 8.8 Ib 28

32 NF ΦD B1 K H n-m ΦD1 ΦD2 EDM B2 B3 L1 EDM MILLING TURNING L2 L3 Permanent magnetic chuck For hard to hold parts requiring exceptionally high power, such as high alloyed tool steels and materials containing cobalt. Aluminium housing, pole plate made from tool steel. Extremely high clamping force through neodymium-iron-boron magnets Available with flange on request NF with pole pitch mm Max. uniform magnetic clamping force up to 180N/cm² Best for small and thin workpiece Magnetic field height : 4 mm Polar plate re-grind of 3mm High precision with no residual magnetism Model Dia(D1) Height(H) L1 L2 L3 B1 B2 D2 D4 n M K Net Weight NF (3.94) 5 (2.5) 48 (1.89) (2.91) - 70 (2.7) 90 (3.54) kg / 4.8 lb NF (2.5) 54 (2.13) 88 (3.4) - 7 (2.4) 98 (3.8) 95 ( (4.33) kg / 7.5 lb NF (.30) 5 (2.5) 54 (2.13) 104 (4.09) 124 (4.88) 2 (2.44) 98 (3.8) 140 (5.51) kg / 12.3 lb NF (7.09) 5 (2.5) 4 (2.59) 104 (4.09) 124 (4.88) 2 (2.44) 98 (3.8) 10 (.30) kg / 15. lb NF (7.87) 5 (2.5) 74 (2.91) 104 (4.09) 134 (5.28) 73 (2.87) 110 (4.33) 180 (5.51) kg / 19.2 lb 29

33 PMB L L2 EDM MILLING B2 B1 B H H1 L1 EDM Permanent magnetic chuck For complex, small, hard to hold parts requiring extra accuracy and power PMB with pole pitch mm High polar plate stability of ± mm Bigger sizes available on request Highest uniform clamping force up to 180 N/cm² Magnetic field height : 10 mm Polar plate re-grind of 3 mm Clamping of more than one workpiece is possible Model Width(B) Length(L) L1 L2 Height(H) H1 B1 B2 Net Weight PMB (2.7) 140 (5.51) 118 (4.5) 100 (3.94) 49 (1.93) 12 (0.47) 0 (2.3) 35 (1.38) 3.5 kg / 7.7lb PMB (2.7) 200 (7.87) 170 (7.00) 49 (1.93) 12 (0.47) 0 (2.3) 35 (1.38) 5 kg / 11lb 30

34 PMG L2 L1 L2 EDM B G H H1 EDM MILLING L Permanent magnetic chuck For hard to clamp parts requiring exceptionally high power, such as high alloyed tool steels and materials containing cobalt Extremely high clamping force due to a specially developed construction, stable all-steel body ON-OFF control on both ends Larger models with power-operated switching mechanism available on request Pole pitch 4 mm ST and 2 mm with extra NdFeB between the poles Max. uniform magnetic clamping force up to 180 N/cm² Magnetic field height : 10 mm Polar plate re-grind of 3 mm Model Width(B) Length(L) Height(H) L1 L2 H1 G Net Weight PMG (1.54) 82 (3.23) 170 (.9) 10 ( kg / 73 lb 31

35 PMY Turning TURNING EDM Circular permanent magnetic chuck with micropitch poles Clamping for grinding PMY with pole pitch mm Max. uniform magnetic clamping force up to 120 N/cm² Best for small and thin workpiece Low height and light weight High precision with no residual magnetism Model PMY-100 Diameter(D) 100 (3.94) Height 50 (1.97) L1 7.5 (3.01) D2 0 (2.3) D3 85 (3.35) n 4 M 8 K Net Weight 3 kg / 7 Ib PMY (5.12) 50 (1.97) 100 (3.94) 90 (3.54) 115 (4.53) kg / 11 Ib PMY (1.97) 117 (4.1) 110 (4.33) 132 (5.20) kg / 15 Ib PMY (.30) 52 (2.05) 129 (5.08) 120 (4.72) 140 (5.51) kg / 18 Ib PMY (7.87) 52 (2.05) 19 (.5) 10 (.30) 180 (7.09) kg / 2 Ib PMY (9.84) 52 (2.05) 213 (8.39) 200 (7.87) 230 (9.0) kg / 42 Ib PMY (11.81) 54 (2.13) 25 (10.43) 250 (9.84) 280 (11.02) kg / 2 Ib PMY (2.28) 30 (14.17) 320 (12.0) 30 (14.17) kg / 125 Ib PMY-00 2 (2.44) 553 (21.77) 500 (19.9) 540 (21.2) 12 5 (0.20) 137 kg / 301 Ib 32

36 NY Turning TURNING Circular permanent magnetic chuck with parallel poles Clamping for grinding and turning Pole pitch 5+8 mm Max. magnetic clamping force up to 140 N/cm² Concentric grooves simplify the centring of workpiece Variable magnetic clamping force Balanced for high RPM Centre drilling of locating hole is available on request High precision with no residual magnetism Model Diameter(D1) Height(H) D2 D3 n M K Net Weight NY (3.94) 0 (2.3) 70 (2.7) 85 (3.35) (0.2) 3.5 kg / 7.7 lb NY (5.12) 0 (2.3) 90 (3.54) 100 (3.94) (0.2) 5.9 kg / 13 lb NY (2.3) 110 (4.33) 115 (4.53) (0.2) 8 kg / 224 lb NY (.30) 0 (2.3) 120 (4.72) 140 (5.51) (0.2) 9 kg / 19.8 lb NY (7.87) 150 (.30) 180 (7.09) 8 5 (0.2) 13 kg / 29 lb NY (9.84) 200 (7.87) 230 (9.0) 8 5 (0.2) 20 kg / 44 lb NY (11.81) 85 (3.35) 250 (9.84) 280 (11.02) 8 5 (0.2) 29 kg / 4 lb NY (13.78) 85 (3.35) 300 (11.81) 330 (12.99) 12 5 (0.2) 40 kg / 88 lb NY (3.35) 300 (11.81) 350 (47.24) 12 5 (0.2) 59 kg / 130 lb NY (17.72) 85 (3.35) 350 (13.78) 400 (59.0) 12 5 (0.2) 70 kg / 154 lb NY (19.9) 85 (3.35) 450 (17.72) 12 5 (0.2) 90 kg / 198 lb 33

37 EPY Turning TURNING Circular electro-permanent magnetic Clamping for grinding of disc shaped workpieces on internal and external grinders with rotary tables Pole pitch 1+3 mm Max. magnetic clamping force up to 120 N/cm² Electro-permanent technology with no deformation owing to the rise of temperature Can eliminate residual magnetism from the workpiece Coolant and water proof structure Mono-block housing for maximum stability Model Diameter(D1) Height(H) D2 D3 n M G Net Weight Controller (400V) EPY (11.81) 75(2.95) 10(.30) 190(7.48) kg / 88 Ib EPY (11.75) 75(2.95) 210(7.87) 250(9.84) kg / 11 Ib EPY (19.9) 75(2.95) 320(12.0) 380(14.9) kg / 254 Ib EPY-00 00(23.2) 75(2.95) 350(13.78) 390(15.35) kg / 34 Ib EPY (27.5) 75(2.95) 400(15.75) 450(17.72) 1 25 kg / 584 Ib CGD EPY (31.50) 75(2.95) 450(17.72) 500(19.9) kg / 50 Ib CGD EPY (39.37) 75(2.95) 550(21.5) 20(24.41) kg / 1014 Ib CGD EPY-1200 EPY (47.24) 1500(59.0) Upon request 590 kg / 1298 Ib 922 kg / 2028 Ib CGF CGF 34

38 NR Turning TURNING Circular permanent magnetic chuck with radial poles Clamping for grinding and turning of ring-shaped workpieces Max. magnetic clamping force up to 180 N/cm² Concentric grooves simplify the centring of workpiece Balanced for high RPM Centre through hole is available on request for workpiece T-slots available on request for pole extensions allowing 3 sided access in single set-up Model Diameter(D) Height D2 D3 n M K Net Weight NR (3.94) 0 (2.3) 0 (2.3) 85 (3.35) kg / 7.2 Ib NR (5.12) 0 (2.3) 50 (1.97) 100 (3.94) 4 kg / 13 Ib NR (2.3) 90 (3.54) 115 (4.53) kg / 18 Ib NR (.30) 0 (2.3) 120 (4.72) 140 (5.51) kg / 22 Ib NR (7.87) 0 (2.3) 10 (.30) 180 (7.09) kg / 31 Ib NR (9.84) 0 (2.3) 200 (7.87) 230 (9.0) kg / 51 Ib NR (11.81) 250 (9.84) 270 (10.3) kg / 95 Ib NR (12.0) 250 (9.84) 270 (10.3) kg / 110 Ib NR (13.78) 250 (9.84) 280 (11.02) kg / 130 Ib NR (7.87) 20 (10.24) / 340 (13.39) (1.81) 78 kg / 172 Ib NR (19.9) 95 (3.74) 200 (7.87) 300 (11.81) / (0.31) 14 kg / 321 Ib NR (3.74) 250 (9.84) 350 (13.78) / 450 (17.72) (0.31) 210 kg / 42 Ib 35

39 EMW H K ØD2 ØD3 ØD1 n-m Turning TURNING Circular electromagnetic chuck with radial poles Clamping for grinding of ring shaped work pieces Highest clamping force up to 10 N/cm² T-slot can be available as an option with pole extension for grinding wheel at three side operation Magnetic force cover the edge Real magnetic poles Coolant and water proof structure Minimum mechanical deformation with solid one-piece housing Model Diameter Height D2 D3 K n M Voltage Current Net Weight EMW (3.54) 210 (8.27) 250 (9.84) 12 DC90-110V 1.4 A 7 kg / 17 lb EMW (19.9) 90 (3.54) 280 (11.02) 320 (12.0) 12 DC90-110V 1.8 A 120 kg / 24 lb EMW (3.94) 350 (13.78) 390 (15.35) 12 DC90-110V 2.5 A 195 kg / 429 lb EMW (27.5) 100 (3.94) 450 (17.72) 1 DC90-110V 3.2 A 25 kg / 583 lb EMW (31.50) 100 (3.94) 450 (17.72) 500 (19.9) 1 DC90-110V 4.0 A 35 kg / 803 lb EMW (35.43) 100 (3.94) 500 (21.5) 550 (23.2) 8 1 DC90-110V 5.0 A 474 kg / 1043 lb EMW (39.37) 100 (3.94) 550 (21.5) 8 1 DC90-110V.0 A 550 kg / 1210 lb EMW (49.21) DC90-110V 8.8 A 1143 kg / 2515 lb EMW (53.15) DC90-110V 10.0 A 1334 kg / 2934 lb EMW (59.0) Upon request DC90-110V 13.1 A 14 kg / 322 lb EMW (2.99) DC90-110V 14.8 A 1873 kg / 4121 lb EMW (70.87) DC90-110V 1.0 A 2371 kg / 521 lb 3

40 EPW Turning TURNING Circular electro-permanent magnetic chuck with radial poles Clamping for turning or grinding of ring shaped workpieces Max. magnetic clamping force up to 10 N/cm² Electro-permanent technology with no deformation owing to the rise of temperature Can eliminate the residual magnetism from the workpiece T-slot available on request for pole extensions allowing 3 sided access in single set-up Mono-block housing for maxium stability Model Size (D1) Height (H) D2 D3 n M G Pole No. Net weight Controller (400V) EPW-G/S 300 (11.81) 105 (4.13) 10 (.30) 190 (7.48) kg / 121 lb EPW-G/S 400 (11.75) 115 (4.53) 200 (7.87) 280 (11.02) kg / 23 lb EPW-G/S 500 (19.8) 120 (4.72) 280 (11.02) 320 (12.) kg / 348 lb EPW-G/S 120 (4.72) 350 (13.78) 390 (15.35) kg / 499 lb EPW-G/S 700 (27.5) 120 (4.72) 450 (17.72) kg / 82 lb CGD EPW-G/S 800 (31.50) 120 (4.72) 450 (17.72) 500 (19.9) kg / 889 lb CGD EPW-G/S 1000 (39.37) 120 (4.72) 550 (21.5) 20 (24.41) kg / 1391 lb CGD EPW-G/S 1250 (49.21) 107 kg / 237 lb EPW-G/S EPW-G/S 100 (2.99) 1800 (70.87) 173 kg / 3879 lb 2232 kg / 4910 lb Upon request EPW-G/S 2000 (78.74) 2755 kg / 01 lb 37

41 EMY Turning TURNING Circular electromagnetic chuck with concentric poles Clamping for grinding of disc shaped workpieces Pole pitch 4+12 mm Highest uniform clamping force up to 120 N/cm² Gap free construction pole plate Real magnetic poles Coolant and water proof structure Minimum mechanical deformation with solid one-piece housing Model Diameter Height D2 D3 K n M Voltage Current Net Weight EMY (11.81) 90 (3.54) 10 (.30) 190 (7.48) 3 (0.12) A 45 kg / 99 lb EMY (4.13) 210 (8.27) 250 (9.84) A 92 kg / 202 lb EMY (19.9) 105 (4.13) 280 (11.02) 320 (12.0) A 144 kg / 317 lb EMY (4.53) 350 (13.78) 390 (15.35) A 229 kg / 504 lb EMY (27.5) 120 (4.72) 450 (17.72) A 32 kg / 717 lb EMY (31.50) 120 (4.72) 450 (17.72) 500 (19.9) A 42 kg / 937 lb EMY (35.43) 120 (4.72) 550 (21.5) A 539 kg / 118 lb EMY (39.37) 120 (4.72) 550 (21.5) 20 (24.41) A 5 kg / 143 lb EMY (43.31) 7.50 A 839 kg 177 lb EMY (47.24) 8.73 A 998 kg / 2200 lb EMY-1300 EMY (51.18) 1400 (55.12) Upon request A A 1171 kg / 257 lb 1358 kg / 2987 lb EMY (59.0) A 1545 kg / 3399 lb EMY (2.99) A 170 kg / 3872 lb 38

42 EPQ Turning TURNING Circular electro-permanent magnetic chuck with concentric poles Clamping for grinding of disc shaped workpieces Pole pitch 4+12 mm Highest uniform clamping force up to 120 N/cm² Electro-permanent technology with no deformation owing to the rise of the temperature Gap free construction pole plate Real magnetic poles Coolant and water proof structure Minimum mechanical deformation with solid one-piece housing Model Diameter Height D2 D3 K n M Net Weight Controler Unit EPQ (3.94) 210 (8.27) 250 (9.84) kg / 187 lb EPQ (19.9) 100 (3.94) 280 (11.02) 320 (12.0) kg / 298 lb EPQ (3.94) 350 (13.78) 390 (15.35) kg / 430 lb EPQ (27.5) 100 (3.94) 450 (17.72) 1 25 kg / 584 lb EPQ (31.50) 100 (3.94) 450 (17.72) 500 (19.9) 1 35 kg / 805 lb CGD EPQ (27.5) 100 (3.94) 500 (19.9) 50 (22.05) kg / 970 lb CGD EPQ (39.37) 100 (3.94) 550 (21.5) 20 (24.41) kg / 1213 lb CGD EPQ (43.31) 830 kg / 1830 lb CGD EPQ (47.24) 990 kg / 2183 lb CGF EPQ (51.18) 110 kg / 2557 lb CGF EPQ (55.12) Upon request 1350 kg / 297 lb CGF EPQ (59.0) 1550 kg / 3417 lb CGF EPQ (2.99) 170 kg / 3880 lb CGF 39

43 PR TURNING Electro-permanent magnetic chuck for heavy turning Turning 80 L L1 L2 H H1 Universal clamping for heavy turning Sliding pole extension Max. magnetic clamping force up to 180 N/cm² Highly concentrated magnetic field with low flux depth Prevents magnetization of tooling Coolant proof structure Easy to deploy High precision with no residual magnetism Easy and economic to use with different modules combination Ø20*20/Ø14THRU W1 W Sliding pole extensions Model Width(W) Length(L) L1 L2 W1 Height(H) H Net weight PR (9.8) 450 (17.7) 370 (14.) 350 (13.8) 220 (8.7) 80 (3.1) 87 (3.4) 73 kg / 10 lb PR (9.8) 930 (3.) 850 (33.5) 500 (19.7) 220 (8.7) 80 (3.1) 87 (3.4) 10 kg / 352 lb PR (18.1) 1040 (40.9) 950 (37.4) 500 (19.7) 430(1.9) 80 (3.1) 87 (3.4) 228 kg / 502 lb 40

44 PLM G Lifting magnets F L H2 H1 B B1 Permanent lifting magnet For lifting ferromagnetic material, bar stock, cold rolled High power to weight ratio Compact and light Minimum of 3X safety factor Suitable for flat and round material Maintenance free design Safety device prevent accidental deactivation Can be switched off by one hand only Model Safe Working Load Width Length H1 H2 B1 F G Net Weight PLM kg / 220 lb 70 (2.7) 130 (5.12) 0 (2.3) 53 (2.09) 17 (.93) 35 (1.38) 28 (1.10) 3.5 kg / 8 lb PLM kg / 0 lb 95 (3.74) 205 (8.07) 83 (3.27) 70 (2.7) 220 (8.) 47 (1.85) 40 (1.57) 10 kg / 22 lb PLM kg / 1320 lb 272 (10.71) 104 (4.09) 95 (3.74) 29 (11.5) 4 (2.52) 50 (1.97) 23 kg / 51 lb PLM kg / 2200 lb 10 (.30) 318 (12.52) 140 (5.51) 95 (3.74) 410 (1.14) 4 (2.52) 50 (1.97) 44 kg / 97 lb PLM kg / 4400 lb 10 (.30) 49 (19.53) 140 (5.51) 120 (4.72) 508 (20.00) 0 (2.3) 72 kg / 158 lb PLM kg / 00 lb 230 (9.0) 510 (20.08) 212 (8.35) 155 (.10) 100 (3.94) 70 (2.7) 10 kg / 352 lb PLM kg / lb 30 (14.17) 725 (28.54) 21 (10.28) 180 (7.09) 980 (38.58) 100 (3.94) 70 (2.7) 450 kg / 990 lb Model Load Plate Max Plate Min Thickness Plate Max Length Load Round Max Round Min Thickness Round Max Dia. PLM kg / 220 Ib 15 (0.59) 1000 (39.37) 40 kg / 88 lb 8 (0.31) 150 (5.9) PLM kg / 0 Ib 1500 (59.0) 120 kg / 24 lb 12 (0.47) 180 (7.09) PLM kg / 1320 Ib 2000 (78.74) 240 kg / 528 lb 250 (9.84) PLM kg / 2200 Ib 40 (1.57) 3000 (118.11) 400 kg / 880 lb 280 (11.02) PLM kg / 4400 Ib 55 (2.17) 3000 (118.11) 800 kg / 170 lb 35 (1.38) 350 (13.78) PLM kg / 00 Ib 70 (2.7) 3500 (137.8) 1200 kg / 240 lb 45 (1.77) PLM kg / lb 85 (3.35) 4000 (157.48) 2000 kg / 4400 lb 55 (2.17) 450 (17.7) 41

45 PLM-T H H1 F G L L1 W W1 Lifting magnets Permanent lifting magnet for safe handling of thin plates Plate handling for thin plates De-stack down to 10 mm plates Special design allows controlled depth of flux High power with shallow flux depth, Specifically designed for de-stacking thin plates High capacity with low flux depth Model Width(W) Length(L) Height(H) H1 W1 L1 G F Net Weight PLM-T (3.74) 185 (7.28) 93 (3.) 70 (2.7) 10 (.30) 208 (8.19) 40 (1.57) 50 (1.97) 10 kg / 22 lb PLM-T (9.84) 114 (4.49) 95 (3.74) 29 (11.5) 275 (10.83) 50 (1.97) 5 (2.5) 19 kg / 42 lb Model Flat load Max Min Thickness Max Length Load Round Max Round Min Dia. Round Max Dia. PLM-T kg / 330 lb 1200 (47.24) 0 kg / 132 lb 0 (2.3) 180 (7.09) PLM-T kg / 0 lb 12 (0.47) 1500 (59.0) 120 kg / 24 lb 0 (2.3) 180 (7.09) 42

46 PLM-R Lifting magnets ON OFF 130 W W1 H H1 F G L L1 Permanent lifting magnet for safe handling of round work piece Round or flat, the safest way to handle a load. Larger V shape pole shoes than standard PLM to ensure safer conditions Higher performance on rounds than standard PLM Larger V for higher stability on round stock Low flux depth allowing de-stacking of thin loads Model Width(W) Length(L) Height(H) H1 W1 L1 G F Net Weight PLM-R (4.84) 155 (.10) 94 (3.70) 70 (2.7) 220 (8.) 215 (8.4) 40 (1.57) 50 (1.97) 15 kg / 33 lb PLM-R (8.03) 220 (8.) 131 (5.1) 95 (3.74) 29 (11.5) 272 (10.71) 50 (1.97) 5 (2.5) 38 kg / 84 lb PLM-R (11.02) 252 (9.92) 178 (7.01) 95 (3.74) 410 (1.14) 252 (9.92) 50 (1.97) 5 (2.5) 85 kg / 187 lb PLM-R (11.02) 252 (9.92) 178 (7.01) 95 (3.74) 508 (20.00) 49 (19.53) 0 (2.3) 150 kg / 330 lb PLM-R (17.48) 429 (1.89) 293 (11.54) 155 (.10) 509 (20.04) 70 (2.7) 100 (3.94) 340 kg / 748 lb Model Flat load Max Min Thickness Max Length Load Round Max Round Min Dia. Round Max Dia. PLM-R kg/0 lb 1500 (59.0) 150 kg/330 lb 0 (2.3) 200 (7.87) PLM-R kg/1320 lb 2000 (78.74) 300 kg/0 lb 0 (2.3) 300 (11.81) PLM-R kg/2200 Ib 40 (1.57) 3000 (118.11) 500 kg/1100 lb 30 (14.17) PLM-R kg/4400 Ib 55 (2.17) 3000 (118.11) 1000 kg/2200 lb 40 (18.11) PLM-R kg/00 Ib 70 (2.7) 3500 (137.8) 1500 kg/3300 lb 100 (3.94) 50 (22.05) 43

47 Activate lifter only when accurately positioned on the load. Never operate,pause or maneuver under suspended loads. Never deactivate lifter until load is well secured. PLM PHS / PVS PHS A D B C PHS - PLM Fixed Beam The PHS spreader beam allows for the mounting of 2 PLM lifters increasing the load handling characteristics without complicating the overall simplicity of the process. PHS 500 handles loads up to 500 kgs and 3000mm while PHS 2000 handles loads up to 2000kg and 5000mm in length. WARNING Read and follow instuctions before using. Engage all polar surfaces to get maximum performance. Difficult lever turning to <ON> position means DANGER. Ensure lever locked in pos. <ON> before lifting. Always hold the lever when activating or de-activating. Do not lift the load if it seems unbalanced. Lifting magnets PHS 500 PHS 2000 PHS 500 PHS 500 PHS 2000 PHS 2000 A (mm) In Combination with: 2 x PLM x PLM-00 2 x PLM-00 2 x PLM-1000 B (mm) Load (kg) C (mm) Max Length (mm) D (mm) Max Width (mm) Weight (kg) Load (kg) Max Length (mm) Rounds Plates PVS B A PVS - PLM Vertical System PVS system is designed to rotate flat plates from horizontal to vertical and back. Can be used to flip parts over in a safe manner using simple stalls PVS is adaptable to workpieces of different sizes, changing the position of locking pins. PVS is available for PLM 300/00/1000. Technical characteristics Model PVS 300 PVS 00 PVS 1000 A (mm) B (mm) C (mm) D (mm) Weight (kg) Load Max (kg) Max length plate (mm) Max height plate (mm)

48 CUA / CUD / CUT CUA-A CUA-H MILLING DXA-5 MILLING Control unit One channel control unit Electro-permanent magnetics modules for milling Multiple input voltage choices Micro computer controls self testing and magnetizing detection Good for both 50 Hz and 0 Hz PLC connection built in Safe and reliable Including 5 meters power cable and 5 meters discharge cable DXA-5 Model Length Width Height Net weight Box CUA-A CUA-H 325 (12.80) 250 (9.84) 170 (.9) 90 (3.54) 100 (3.94) 3.4 kg / 7.5 lb 1. kg / 3.5 lb Metal Plastic Voltage Max. Pole No. / channel Pole size 220 V 400 / 480 V x 50 mm 50 x 50 mm CUD-A CUD-H MILLING DXB-5 MILLING DXB-5 Two channels control unit Electro-permanent magnetics modules for milling Multiple input voltage choices Micro computer controls self testing and magnetizing detection Good for both 50 Hz and 0 Hz PLC connection built in Safe and reliable Including 5 meters power cable and 5 meters discharge cable Model Length Width Height Net weight Box CUD-A CUD-H 325 (12.80) 300 (11.81) 170 (.9) 200 (7.87) 90 (3.54) 105 (4.13) 3.4 kg / 7.5 lb 2.0 kg / 4.4 lb Metal Plastic Voltage Max. Pole No. / channel Pole size 220 V 400 / 480 V x 50 mm 50 x 50 mm CUT-A (With channel selection function) DXA-5 MILLING DXA-5 Model Length Width Height Net weight Box CUT-A 325 (12.80) 170 (.9) 90 (3.54) 3.4 kg / 7.5 lb Metal Two channels control unit Electro-permanent magnetics modules for milling Multiple input voltage choices Micro computer controls self testing and magnetizing detection Good for both 50 Hz and 0 Hz PLC connection built in Safe and reliable Including 5 meters power cable and 5 meters discharge cable With channel selection function Voltage Max. Pole No. / channel Pole size 220 V 5 50 x 50 mm 400 / 480 V x 50 mm 45

49 / CGD / JB -DT One channel control unit -M Electro-permanent magnetics modules for grinding Multiple input voltage choices Micro computer controls self testing and magnetizing detection Good for both 50 Hz and 0 Hz PLC connection built in Safe and reliable Strength adjustable Model Length Width Height Net weight Appilcatin -DT 250 (9.84) 100 (3.94) 1. kg / 3.5 lb external -M 210 (8.27) 110 (4.33) 100 (3.94) 1 kg / 2.2 lb internal Voltage Max. current Max. Pole No. Pole size per channel per channel 220 V 400 / 480 V 50 A 50 A x 50 mm 50 x 50 mm CGD-DT Two channels control unit CGD-M Electro-permanent magnetics modules for grinding Multiple input voltage choices Micro computer controls self testing and magnetizing detection Good for both 50 Hz and 0 Hz PLC connection built in Safe and reliable Strength adjustable Model Length Width Height Net weight Appilcatin CGD-DT 300 (11.81) 200 (7.87) 105 (4.13) 2.0 kg / 4.4 lb external CGD-M 20 (8.27) 110 (4.33) 100 (3.94) 1 kg / 2.2 lb internal Voltage Max. current Max. Pole No. Pole size per channel per channel 220 V 400 / 480 V 50 A 50 A x 50 mm 50 x 50 mm Control unit & Junction box JB-22 Eight channels junction box Fast connections between chucks and control unit Die cast aluminum box IP5 water resistant HARTING connector for quick connection Model Length Width Height Net weight JB (11.02) 230 (9.0) 110 (4.33) 4.5 kg / 9.9 lbs CONTROL UNIT JUNCTION BOX 4

50 CU / CG / RMC CUF / CUS / CUE CGF / CGS / CGE MILLING Control unit Multi-channels control unit Selectable channel multi-channel controller for electro-permanent magnets Multiple input voltage choices Micro computer controls self testing and magnetizing detection Good for both 50 Hz and 0 Hz PLC connection built in Safe and reliable With channel selection function Can be used jointly Model Length Width Height Net weight Channels CUF CUS CUE CGF CGS CGE 383 (15.08) 289 (11.38) 129 (5.08) 8 kg / 17. lb (15.08) 289 (11.38) 129 (5.08) 8 kg / 17. lb 383 (15.08) 289 (11.38) 129 (5.08) 8 kg / 17. lb (15.08) 289 (11.38) 129 (5.08) 8 kg / 17. lb (15.08) 289 (11.38) 129 (5.08) 8 kg / 17. lb 383 (15.08) 289 (11.38) 129 (5.08) 8 kg / 17. lb 8 Voltage Max. Pole No. / channel Pole size 220 V 5 50 x 50 mm 400 / 480 V x 50 mm RMC-1 RMC-2 RMC-3 RMC-9 Remote control RMC For wire remote control Small and compact With magnetic plate on the rear for ease of attachment Model Length Width Height Strength Channel adjustable Selection RMC-1 RMC-2 RMC-3 RMC-9 RMC (5.35) 13 (5.35) 13 (5.35) 13 (5.35) 13 (5.35) (2.0) (2.8) (2.0) (2.0) (2.0) 41 (1.1) 55 (2.17) 41 (1.1) 41 (1.1) 41 (1.1) Yes Yes No Yes No No No No Yes Yes

51 CEB / CUK CEB CEB Control unit for electromagnetic chucks Model Length Width Height Strength adjustable CEB 20 (10.2) 10 (.3) 90 (3.5) Yes Control unit Use with any electromagnetic chucks with input of 130 VAC and output 115 VDC and capacity of up to 500 watts External use design Push button control allows easy selection of full, residual, variable, and release positions Automatic release cycle assures workpiece release, while freeing machine operators from manual demagnetizing operations Current sense and E-stop interlock with machine Up to 1 pole reversal programs CUK-A CUK-A MILLING MILLING Control unit for electro-permanent magnetic chucks Electro-permanent magnetics modules for grinding and milling Universal use for all magnet types Multiple input voltage choices Micro computer controls self testing and magnetizing detection Good for both 50 Hz and 0 Hz PLC connection built in Safe and reliable Multi-demag pattern for different material Model Length Width Height Net weight CUK-A 250 (9.8) 195 (7.7) 10 (4.2) 3.2 kg / 7.1 lb 48

52 PTA / PTB PTA Tools & Magnets Pocket magnet For lifting, sorting out, positioning Handy bridge magnet with strong clamping force Material alnico Maximum operating temprature to 450 C L P L H B L P L H B Model Height Magnetic Pitch(P) Cross-section(L) Cross-section(B) Clamping Force Net Weight PTA-1 11 (0.43) 9 (0.35) 9 (0.35) 8 (0.31) 13 N 17 g / 0.04 lb PTA-2.5 (0.2) 8.5 (0.33).5 (0.2) 24 N 32 g / 0.07 lb PTB D H L P L B Strong magnet For lifting, sorting out, positioning Bridge shape magnet Through hole for mounting High clamping force Maximum operating temperature to 450 C Model Height(H) Magnetic Pitch(P) Cross-section(L) Cross-section(B) Diameter Clamping Force Net Weight PTB-1 PTB-2 PTB-3 PTB-4 PTB-5 PTB- 30 (1.18) 35 (1.38) 41 (1.1) 54.5 (2.15) 15 (0.59) 22 (0.87) 35 (1.38) 41 (1.1) 48 (1.89) 8 (0.31) 11 (0.43) 11 (0.43) 15 (0.59) 15 (0.59) 30 (1.18) 44.5 (1.75) 57 (2.24) 82 (3.23) 5 (0.20) 5 (0.20) 5 (0.20) 2 * 8 (0.31) 2 * 8 (0.31) 2 * 11 (0.43) 45N 90N 120N 230N 320N 470N 5 g / 0.14 lb 150 g / 0.33 lb 220 g / 0.49 lb 380 g / 0.84 lb 100 g / 3.53 lb 2000 g / 4.41 lb 49

53 PTC / PTD PTC D Bar magnet Model Diameter Height(H) Net Weight To line up individual magnet in any desired length Cross section around Maximum operating temperature to 450 C Axially magnetized Material alnico PTC-1 PTC-2 PTC-3 PTC-4 PTC-5 PTC- (0.24) 8 (0.31) 5 (0.20) (0.24) H 30 (1.18) 10 g / 0.02 lb 15 g / 0.03 lb 30 g / 0.07 lb 2 g / lb 3 g / 0.007lb 3 g / lb Tools & Magnets PTD H L B Rectangular bar magnet Model Length(L) Width(B) Height(H) Net Weight To line up individual magnet in any desired length Rectangular cross-section Maximum operating temperature to 450 C Axially magnetized Material alnico PTD-1 PTD-2 PTD-3 PTD-4 PTD-5 PTD- PTD (0.49) 12 (0.47) 15 (0.59) 15 (0.59) 15 (0.59) 15 (0.59) 5 (0.20) 5 (0.20) 5 (0.20) 5 (0.20) 40 (1.57) 0 (2.3) 51 (2.01) 0 (2.3) 100 (3.94) 1 g / 0.04 lb 37 g / 0.08 lb 50 g / 0.11 lb 120 g / 0.2 lb 18 g / 0.37 lb g / 0.15 lb 230 g / 0.51 lb 50

54 PTE / PTF / PTG PTE Pot magnet with inner thread Tools & Magnets D M B H For installation in apparatus, hold, position Maximum operating temperature to 450 C Material alnico Model Diameter (D) Height (H) Thread (M) Clamping Force Thread Height (B) Net Weight PTE-1 PTE-2 PTE-3 PTE-4 17 (0.7) 21 (0.83) 35 (1.38) 1 (0.3) 19 (0.75) 30 (1.18) M M M M 18 N 28 N 5 N 115 N 5 (0.20) (0.24) 9 (0.35) 2 g / 0.04 lb 50 g / 0.07 lb 110 g / 0.07 lb 215 g / 0.07 lb PTE-5 5 (2.5) 43 (1.9) M N 13 (0.51) 1080 g / 0.07 lb PTF Shallow pot magnet with through hole For installation in apparatus Maximum operating temperature to 450 C Material alnico D Model Diameter (D) Height (H) Hole Diameter (d) Clamping Force Net Weight d PTF-1 PTF-2 19 (0.75) 29 (1.14) 8 (0.31) 9 (0.35) 3.5 (0.14) 5 (0.20) 30 N 55 N 18 g / 0.04 lb 4 g / 0.10 lb PTF-3 38 (1.50) 10.5 (0.41) 5 (0.20) 95 N 97 g / 0.21 lb H PTG Button magnet with through hole For laboratory use, measure, position Shared flat way through hole for mounting Maximum operating temperature to 450 C Material alnico D d H Model Diameter (D) Height (H) Hole Diameter (d) Clamping Force Net Weight PTG-1 PTG-2 PTG-3 PTG-4 13 (0.51) 19 (0.75) 32 (1.2) 13 (0.51) 1 (0.3) 4.2 (0.17) 5.4 (0.21) 5.4 (0.21) 7 (0.28) 7 N 19 N 29 N N 7 g / 0.01 lb 20 g / 0.04 lb 5 g / 0.12 lb 133 g / 0.29 lb 51

55 PTH / PTJ PTH Strong pot magnet with inner thread As holding magnet Strong clamping force Grab bar also serves to facilitate the magnets and pull the trigger from the workpiece Maximum operating temprature to 350 C D M H Tools & Magnets Model Diameter(D) Height(H) Thread Clamping Force Net Weight PTH-1 2 (1.02) M 100 N 80 g / 0.17 lb PTH-2 30 (1.18) M 150 N 110 g / 0.24 lb PTH-3 40 (1.57) 40 (1.57) M8 300 N 240 g / 0.53 lb PTH-4 50 (1.97) 40 (1.57) M8 500 N 500 g / 1.10 lb PTJ M H D Strong pot magnet with inner thread As holding magnet Strong clamping force Grab bar also serves to facilitate the magnets and pull the trigger from the workpiece Maximum operating temprature to 350 C Model Diameter(D) Height(H) Thread Clamping Force Net Weight PTJ-1 PTJ-2 PTJ-3 44 (1.73) 54 (2.12) 70 (2.7) 44 (1.73) 50 (1.97) 3 (2.48) M8 M8 M8 320 N 470 N 980 N 900 g / 1.98 lb 1200 g / 2.5 lb 200 g / 5.73 lb 52

56 PTN / PTP Holding magnet Tools & Magnets PTN-4 PTN-3 PTN-2 PTN-5 PTN-1 PTN- Can be used to hold down drawings, rules and paper patterns. Can be incorporated in press dies. Can hold workpieces during wire cutting. For specifications, OD tolerance, plating, painting and peripheral knurling, are available for selection according to applications. When tapped holes are made on the back, they can be used in various applications. T-handles Model Holding Power Dimensions Tapped Hole Magnet type PTN N Φ2(1.02) x 25(0.98) M x 1.0 NdFeB PTN N Φ30(1.18) x 2(1.02) M x 1.0 NdFeB PTN-3 PTN N 500 N Φ40(1.57) x 30(1.18) Φ50(1.97) x 40(1.57) M8 x 1.25 M8 x 1.25 NdFeB NdFeB Model Tapped Hole PTN N 2(1.02) x 2(1.02) x 25(0.98) N/A NdFeB PTN-7 M x 1.0 PTN- 200 N 2(1.02) x 0(2.3) x 25(.098) M x 1.0 NdFeB PTN-8 M8 x 1.25 Holding magnet PTP-5 PTP-4 PTP-8 PTP-3 PTP-7 PTP-2 PTP-1 PTP- Can be used to hold down drawings, rules and paper patterns. Can be incorporated in press dies. Can hold workpieces during wire cutting. For specifications, OD tolerance, plating, painting and peripheral knurling, are available for selection according to applications. When tapped holes are made on the back, they can be used in various applications. Model Holding Power Dimensions Tapped Hole Magnet type PTP N Φ5(0.20) x 13(0.51) - Alnico PTP N Φ7(0.2) x 13(0.51) - Alnico PTP N Φ10(0.39) x 15(0.59) - Alnico PTP-4 20 N Φ15(0.59) x 15(0.59) - Alnico PTP-5 40 N Φ20(0.79) x 15(0.59) - Alnico PTP- 8.0 N Φ10(0.39) x 18(0.71) M5 x 0.8 Alnico PTP-7 20 N Φ15(0.59) x 18(0.71) M5 x 0.8 Alnico PTP-8 40 N Φ20(0.79) x 18(0.71) M5 x 0.8 Alnico 53

57 PTM / PTK / PTL Holding magnet PTM-5 PTM-3 PTM-1 PTM- PTM-4 PTM-2 Model Holding Power Dimensions Knurl Magnet type PTM-1 PTM-2 PTM-3 PTM-4 PTM-5 PTM- 30 N 30 N 50 N 50 N 90 N 90 N Φ10(0.39) x 8(0.31) Φ10(0.39) x 8(0.31) Φ18(0.71) x 8(0.31) Φ18(0.71) x 8(0.31) Φ25(0.98) x 10(0.39) Φ25(0.98) x 10(0.39) NO YES NO YES NO YES SmCo SmCo SmCo SmCo SmCo SmCo Can be used to hold down drawings, rules and paper patterns. Can be incorporated in press dies. Can hold workpieces during wire cutting. For specifications, OD tolerance, plating, painting and peripheral knurling, are available for selection according to applications. Example of Appication These holding magnets can be used to hold pieces cut out by wire cutting to prevent them from moving or falling from the securing area. Tools & Magnets PTK Thin type magnetic holder For installation in apparatus, hold, position Thin and powerful magnetic force Material alnico 500 Model Diameter (D) W L H A B P Net Weight PTK-1 17 (0.7) 1 (0.3) 1 (0.3) 1 (0.3) 18 N 18 N 2 g / 0.04 lb PTK-2 21 (0.83) 19 (0.75) 19 (0.75) 19 (0.75) 28 N 5 (0.20) 28 N 50 g / 0.07 lb PTK-3 5 N (0.24) 5 N 110 g / 0.07 lb PTK-4 35 (1.38) 30 (1.18) 30 (1.18) 30 (1.18) 115 N 9 (0.35) 115 N 215 g / 0.07 lb PTL Thin type magnetic holder For installation in apparatus, hold, position Thin and powerful magnetic force Material alnico 500 Model Diameter (D) W L H A B P Net Weight PTL-1 17 (0.7) 1 (0.3) 1 (0.3) 1 (0.3) 18 N 18 N 2 g / 0.04 lb PTL-2 21 (0.83) 19 (0.75) 19 (0.75) 19 (0.75) 28 N 5 (0.20) 28 N 50 g / 0.07 lb 54

58 MB / MSA Magnetic base Tools & Magnets MB-17 MB-40 MB-0 MB-80 MB-100 MB-130 MB-150 Using as a clamping base Can be used as a register base or a measuring base Additional magnetic surface at the rear Model Holding Power Length Width Height Tapped Hole Net Weight MB N 30 (1.18) 30 (1.18) 30 (1.18) M5 x 0.8 x kg / 0.44 lb MB N 3 (1.42) 30 (1.18) 35 (1.38) M5 x kg / 0.44 lb MB-0 00 N 55 (2.17) 50 (1.97) 73 (2.87) M8 x 1.25 x kg / 2.4 lb MB N 0 (2.28) 50 (1.97) 55 (2.17) M8 x 1.25 x 7 1 kg / 2.2 lb MB N 73 (2.87) 50 (1.97) 55 (2.17) M8 x 1.25 x kg / 2.8 lb MB N 117 (4.1) 50 (1.97) 55 (2.17) M8 x 1.25 x 7 2 kg / 4.4 lb MB N 120 (4.72) 0 (2.3) 52 (2.05) M8 x 1.25 x kg / 5.5 lb Clamping hole Sub pole Main pole MSA-A MSA-B MSA-C MSA-D Magnetic stand Holding a measuring device such as dial gauge Improved precision and efficiency Can be held on vertical, upsidedown or round bar surface 55 Model Clamlping Force Base Dimension Dia. Length Dia. Length Dia. Net Weight (Main Pole) (Main Pole) (Sub Pole) (Sub Pole) (Clamp hole) MSA-A MSA-B MSA-C MSA-D 800 N 800 N 1000 N 1300 N 0 (2.28) x 50 (1.97) x 55 (2.17) 0 (2.28) x 50 (1.97) x 55 (2.17) 73 (2.87) x 50 (1.97) x 55 (2.17) 117 (4.1) x 50 (1.97) x 55 (2.17) 12 (0.47) 14 (0.55) 1 (0.3) 18 (0.71) 180 (7.09) 205 (8.07) 12 (0.47) 250 (9.84) 1 (0.3) 350 (13.78) 1 (0.3) 205 (8.07) 210 (8.27) 245 (9.5) 245 (9.5) 8 (0.31) 8 (0.31) 8 (0.31) 8 (0.31) 1. kg / 3.53 lb 1.7 kg / 3.75 lb 2.5 kg / 5.51 lb 3.4 kg / 7.50 lb

59 MSB Tools & Magnets MSB-A MSB-B MSB-C MSB-D Magnetic stand MSB-E Holding a measuring device such as dial gauge Mechanical universal arm Fine adjustment high precision clamp Model Clamping Force Base Dimension Arm Length L1 L2 L3 Dia. Net Weight (Clamp hole) MSB-A MSB-B MSB-C MSB-D MSB-E 300 N 300 N 800 N 1000 N 1300 N 35 (1.38) x 30 (1.18) x 35 (1.38) 35 (1.38) x 30 (1.18) x 35 (1.38) 0 (2.28) x 50 (1.97) x 55 (2.17) 73 (2.87) x 50 (1.97) x 55 (2.17) 117 (4.1) x 50 (1.97) x 55 (2.17) 158 (.22) 205 (8.07) 310 (12.2) 385 (15.1) 35 (25) 5 (2.2) 5 (2.2) 110 (4.33) 147 (5.79) 285 (11.22) 51 (2.01) 51 (2.01) 101 (3.98) 130 (5.12) 225 (8.8) 17 (0.7) 73 (2.87) 73 (2.87) 7 (2.99) 7 (2.99) 8 (0.31) 8 (0.31) 8 (0.31) 8 (0.31) 8 (0.31) 0.4 kg / 0.88 lb 0.4 kg / 0.88 lb 1.4 kg / 3.09 lb 1.8 kg / 3.97 lb 5.0 kg / 11 lb 5

60

MAGNETIC WORKHOLDING WORKHOLDING WITH PRECISION AND PERFORMANCE. AMTC BV (+31)

MAGNETIC WORKHOLDING WORKHOLDING WITH PRECISION AND PERFORMANCE. AMTC BV (+31) MGNETIC WORKHOLDING WORKHOLDING WITH PRECISION ND PERFORMNCE PERM CHPTER OVERVIEW CHPTER 1 Page 17-32 SV-RT.-No. POLE PITCH COMMENTS MCHINING OPERTION* PGE Permanent Magnetic Chucks 220.30 1,9 mm magnet

More information

PERMANENT LIFTING MAGNETS. P antented. The Ultimate Safer Lifting SAFER-02-EN

PERMANENT LIFTING MAGNETS. P antented. The Ultimate Safer Lifting SAFER-02-EN PERMANENT LIFTING MAGNETS P antented The Ultimate Safer Lifting CONFORMS TO STANDARDS SAFER-02-EN Exclusive and Safest Technology Concentrated Power The Key elements for high power are the complete isolation

More information

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281

More information

ZERO-POINT CLAMPING SYSTEM

ZERO-POINT CLAMPING SYSTEM simple. gripping. future. ZERO-POINT CLAMPING SYSTEM 22 Quick Point Grid Plates 3 Quick Point Plates 34 Quick Point Round Plates 39 Quick Point Adaptor Plates 4 Quick Point Clamping Studs 43 Quick Point

More information

2006 MINI Cooper S GENINFO Starting - Overview - MINI

2006 MINI Cooper S GENINFO Starting - Overview - MINI MINI STARTING SYSTEM * PLEASE READ THIS FIRST * 2002-07 GENINFO Starting - Overview - MINI For information on starter removal and installation, see the following articles. For Cooper, see STARTER WITH

More information

SURFACE GRINDERS. A Line of Precision Low-cost, High Performance Surface Grinders

SURFACE GRINDERS. A Line of Precision Low-cost, High Performance Surface Grinders SURFACE GRINDERS PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 SURFACE GRINDERS A Line of Precision Low-cost, High Performance Surface Grinders Precision Manual Surface Grinders Precision Hydraulic

More information

JET FINISHING. Surface Grinders Bench Grinders Accessories

JET FINISHING. Surface Grinders Bench Grinders Accessories Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE GRINDER FINISHING

More information

Guide units. For toolmaking, fixture manufacturing and machine engineering

Guide units. For toolmaking, fixture manufacturing and machine engineering Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar

More information

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings

More information

SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS

SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN

More information

Performance requires quality.

Performance requires quality. 131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21

More information

The hand controlled. years warranty. N 1 in the world. magnetic lifter. Safety Through Power

The hand controlled. years warranty. N 1 in the world. magnetic lifter. Safety Through Power The hand controlled magnetic lifter N 1 in the world International Patent years warranty Safety Through Power Hand controlled magnetic lifters A wide Choice of Quality MaxX 125 MaxX 250 MaxX 500 MaxX 1000

More information

The Classification Chart of PMI Linear Guideways

The Classification Chart of PMI Linear Guideways 1 The Characteristics of MI s The Classification Chart of MI s 2 (1) igh positioning accuracy, high repeatability The MI linear guideway is a design of rolling motion with a low friction coefficient, and

More information

GEAR GENERATION GEAR FORMING. Vipin K. Sharma

GEAR GENERATION GEAR FORMING. Vipin K. Sharma GEAR GENERATION GEAR FORMING 1 GEAR MANUFACTURING Manufacturing of gears needs several processing operations in sequential stages depending upon the material and type of the gears and quality desired.

More information

Clausing Precision Manual Surface Grinders

Clausing Precision Manual Surface Grinders Clausing Precision Manual Surface Grinders Precision Manual Surface Grinders with Table Sizes: 6" x 18" & 8" x 18" Standard Features... High precision cartridge spindle Anti-wear guide ways coated with

More information

SADDLE TYPE MANUAL FEATURES: SADDLE TYPE FEATURES:

SADDLE TYPE MANUAL FEATURES: SADDLE TYPE FEATURES: SADDLE TYPE MANUAL FEATURES: Meehanite cast iron of base, column, saddle, and table provides greater rigidity and highest possible grinding load capacity Ball bearing slideways resist damage due to impact

More information

Flexible Couplings 44

Flexible Couplings 44 Flexible Couplings 44 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg MTY (81) 83 54 10 18 Why RINGSPANN Flexible Couplings? No connection of shafts without clutches It is a well-known fact

More information

B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections

B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components

More information

L Standard Parts for Mould Making

L Standard Parts for Mould Making A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components

More information

Data Sheet PM Generator Kit version K535S-4-11 K535S-4-12 K535S-4-14 K535S-4-17 K535S-4-22

Data Sheet PM Generator Kit version K535S-4-11 K535S-4-12 K535S-4-14 K535S-4-17 K535S-4-22 Data Sheet PM Generator Kit version -11-12 -14-17 -22 HIGH THERMAL CLASS HIGH EFFICIENCY RELIABILITY DESIGNED AND MANUFACTURED IN FRANCE OPTIMISED INTEGRATION HIGH QUALITY SAMARIUM COBALT MAGNETS This

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are

More information

110/127 V - 220/240 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE Fluo 2 x 36 W

110/127 V - 220/240 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE Fluo 2 x 36 W /27 V - 2/2 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE 963 39 Fluo 2 x 8 W 963 37 Fluo W 963 36 Fluo 2 x 8 W 8, 36 and 8 W fluorescent luminaires Ø 26 mm bi-pin tubes, standard G3

More information

2-1 HG Series - Heavy Load Ball Type Linear Guideway

2-1 HG Series - Heavy Load Ball Type Linear Guideway 2 G99TE15-114 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove

More information

Linear Guideways HG Series

Linear Guideways HG Series 18 G99TE1-67 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove

More information

TORQUE-MOTORS. as Actuators in Intake and Exhaust System. SONCEBOZ Rue Rosselet-Challandes 5 CH-2605 Sonceboz.

TORQUE-MOTORS. as Actuators in Intake and Exhaust System. SONCEBOZ Rue Rosselet-Challandes 5 CH-2605 Sonceboz. TORQUE-MOTORS as Actuators in Intake and Exhaust System SONCEBOZ Rue Rosselet-Challandes 5 CH-2605 Sonceboz Tel.: +41 / 32-488 11 11 Fax: +41 / 32-488 11 00 info@sonceboz.com www.sonceboz.com as Actuators

More information

Collet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13

Collet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний Штрай Москва, ул. Островитянова, 13 Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155

More information

Standard with cone bushing. Backlash-free Safety Clutch

Standard with cone bushing. Backlash-free Safety Clutch EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC

More information

mechanics RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216

mechanics RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216 Overview RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216 D 2 Indexing Table B 218 MD 1 Midget Rotary Axis B 220 ZR 20 Indexing

More information

STAMPINGS QUALITY AT AN AFFORDABLE COST

STAMPINGS QUALITY AT AN AFFORDABLE COST QUALITY AT AN AFFORDABLE COST INTRODUCTION Crompton Greaves Ltd., the pioneer and leader in the Electrical Industry for last seven decades, manufactures its own requirement of Stampings & Laminations for

More information

Precision Surface Grinder-Wizard series

Precision Surface Grinder-Wizard series Precision Surface Grinder-Wizard series Wizard Series Features User Friendly Interface: Modern 6 LCD touch screen operation panel with all the grinding variables sets, all you have to do is to set the

More information

CONVENTIONAL WORKHOLDING

CONVENTIONAL WORKHOLDING simple. gripping. future. CONVENTIONAL WORKHOLDING 1 Avanti Quick Jaw Exchange System 14 Avanti 46 16 Avanti 18 Avanti 11 Profilo Contour Jaw System 112 Profilo 113 Profilo 114 Profilo Dual clamping vice

More information

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT 128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel

More information

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273, Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks

More information

JET FINISHING. Surface Grinders Bench Grinders Accessories

JET FINISHING. Surface Grinders Bench Grinders Accessories JET FINISHING Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE

More information

Changeover in seconds!

Changeover in seconds! Changeover in seconds! PZ QUIRI HYDROMECANIQUE 6 Rue Denis Papin 67120 DUTTLENHEIM Tél. : +33 3 88 04 84 00 Fax. : +33 3 88 04 84 01 Email : quiri.hydro@quiri.com QUIRI Hydromécanique is specialized in

More information

Live and Dead Centres

Live and Dead Centres s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for

More information

Magnetic Effects of Electric Current

Magnetic Effects of Electric Current CHAPTER13 Magnetic Effects of Electric Current Multiple Choice Questions 1. Choose the incorrect statement from the following regarding magnetic lines of field (a) The direction of magnetic field at a

More information

WORKHOLDING AUTOMATION SOLUTION MAGNETIC LIFTING

WORKHOLDING AUTOMATION SOLUTION MAGNETIC LIFTING AUTOMATION SOLUTION MAGNETIC LIFTING EXPERIENCED INNOVATIVE PATHBREAKING SAV-CATALOGU ES MAGNETIC WITH PRECISION AND PERFORMANCE STATIONARY STANDARD AND SPECIAL PRODUCTS COMPETENCE AND QUALITY FIRST-HAND

More information

THE NEW ART OF GRINDING

THE NEW ART OF GRINDING THE NEW ART OF GRINDING AMBITIOUS ZIERSCH company is specializing in the development, production and sale of high precision surface, profile and double column grinding machines. ZIERSCH GmbH is assisting

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden. Copyright 212 ABB TECHNICAL

More information

PERMANENT MAGNETIC AND RARE EARTH

PERMANENT MAGNETIC AND RARE EARTH COOLANT CLEANERS PERMANENT MAGNETIC AND RARE EARTH Smooth-faced and extended-pole Coolant Cleaners extend the life of cutting tools, grinding wheels, pumps and coolant fluids. FEATURES & Benefits Cleaner

More information

High Speed Machines Drive Technology Forward

High Speed Machines Drive Technology Forward High Speed Machines Drive Technology Forward Dr Sab Safi, C.Eng, Consultant/Specialist, SDT Drive Technology There is a continual demand for high speed advanced electrical machines and drives for wide-ranging

More information

Joule losses of magnets in permanent magnet synchronous machines - case concentrated winding machine

Joule losses of magnets in permanent magnet synchronous machines - case concentrated winding machine Joule losses of magnets in permanent magnet synchronous machines - case concentrated winding machine Hanne Jussila Lappeenranta University of Technology 1 Joule losses of permanent magnets Eddy current

More information

ER Collets Nuts Disks

ER Collets Nuts Disks Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50

More information

Milling spindles / H line Up to speed fast: Dynamic and robust for high loads

Milling spindles / H line Up to speed fast: Dynamic and robust for high loads Milling spindles / H line Up to speed fast: Dynamic and robust for high loads SPINDLE TECHNOLOGY I SYSTEM TECHNOLOGY I DRIVE TECHNOLOGY I SERVICE SOLUTIONS www.kessler-group.biz Specialist partner KESSLER

More information

MHS. Drills for die & mold machining B137A

MHS. Drills for die & mold machining B137A 2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the

More information

mechanics RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162

mechanics RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162 Overview RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162 DSH-S Rotary Swivelling Unit C 164 RF 1 Indexing Table C 166 D 1 Rotary

More information

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552 Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder

More information

Basic Motor Theory. Introduction

Basic Motor Theory. Introduction Basic Motor Theory Introduction It has been said that if the Ancient Romans, with their advanced civilization and knowledge of the sciences, had been able to develop a steam motor, the course of history

More information

SCHMIDT-KUPPLUNG GmbH

SCHMIDT-KUPPLUNG GmbH Omniflex About us Many years of experience For 50 years, we have been advising machine manufacturers as partners for compact coupling systems. Our experience in power transmission has given us extensive

More information

Diamond Roller Dressers for Conventional Grinding Wheels, Diamond & CBN Wheels. Diamond Roller Dressers for Gear Manufacturing - Worm Grinding.

Diamond Roller Dressers for Conventional Grinding Wheels, Diamond & CBN Wheels. Diamond Roller Dressers for Gear Manufacturing - Worm Grinding. Diamond Roller Dressers for Conventional Grinding Wheels, Diamond & CBN Wheels. Diamond Roller Dressers for Gear Manufacturing - Worm Grinding. Shinhan Diamond Industrial Co., Ltd. has produced a variety

More information

RW-30kW variable pitch wind turbine

RW-30kW variable pitch wind turbine RW-30kW variable pitch wind turbine 2018 www.instrumentsgroup.c o.za 1. RW-30kw variable pitch wind turbine parameter 1.1 RW-30kW parameter RW-30kw variable pitch Technical parameters 13.5V Wind rotor

More information

Burrs.

Burrs. g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &

More information

The hand controlled. N 1 in the world. years warranty. magnetic lifter. Safety Through Power

The hand controlled. N 1 in the world. years warranty. magnetic lifter. Safety Through Power The hand controlled magnetic lifter N 1 in the world INTERNATIONAL PATENT years warranty Safety Through Power Hand controlled magnetic lifters A wide choice of Quality MaxX 125 MaxX 250 MaxX 500 MaxX 1000

More information

MODEL A-I-SPECIFICATIONS

MODEL A-I-SPECIFICATIONS ARTER Model A Rotary Surface Grinders are built in a light and heavy series. General Construction- The general design of both models is the same but the major units of the A-3 machines are of greater proportions.

More information

Linear Guideway. Forniture per l Industria Gelmini S.r.l.

Linear Guideway. Forniture per l Industria Gelmini S.r.l. Linear Guideway Forniture per l Industria Gelmini S.r.l. Sede Via Cerati, 3/A 43126 Parma Tel. 0521.993844 Fax 0521.291688 Filiale Via Tiziano, 11 46040 Z.I. Guidizzolo (MN) Tel. 0376.847123 Fax 0376.840319

More information

ULTRA IMT Fully Indexable Multi Tool 3-Station 8-Station

ULTRA IMT Fully Indexable Multi Tool 3-Station 8-Station Expanding Machine Capabilities ULTRA IMT Fully Indexable Multi Tool 3-Station 8-Station U.S. PATENT 7,726,554 Other patents pending mate.com/imt Part Number 2010 Worldwide headquarters: 1295 Lund Boulevard,

More information

2-9 RG Series High Rigidity Roller Type Linear Guideway

2-9 RG Series High Rigidity Roller Type Linear Guideway G99TE17-136 2-9 High Rigidity Roller Type Linear Guideway 2-9-1 Advantages and features The new RG series from Hiwin features a roller as the rolling element instead of steel balls. The roller series offers

More information

> clamping force up to kn. > operating pressure up to 500 bar. > piston with internal thread. > for push- and pull operation

> clamping force up to kn. > operating pressure up to 500 bar. > piston with internal thread. > for push- and pull operation Block CYLINDERS for VARIOUS DESIGN APPLICATIONS > clamping force up to 155.5 kn > operating pressure up to 500 bar > piston with internal thread > for push- and pull operation > with longitudinal and cross

More information

Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW

Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form

More information

DEUTROFLUX UWE Universal Stationary Magnetic Particle Crack Detectors

DEUTROFLUX UWE Universal Stationary Magnetic Particle Crack Detectors DEUTROFLUX UWE Universal Stationary Magnetic Particle Crack Detectors Reliable testing for cracks in all directions Optionally with Memory II: Operation via Siemens Touch Panel with parameter memory (e.

More information

Precision Surface Grinder

Precision Surface Grinder Precision Surface Grinder SGS-2040 AHD/SD SGS-2060 AHD/SD SGS-S2460 AHD/SD A 70.9" (1800) 107.3" (2725) 110.2" (2800) B 118.1" (3000) 171.3" (4350) 171.3" (4350) C 163.8" (4160) 236.2" (6000) 244.1" (6200)

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608

More information

MAGNETIC WORKHOLDING for GRINDING. Electro-Permanent magnetic chucks

MAGNETIC WORKHOLDING for GRINDING. Electro-Permanent magnetic chucks MGNETI WORKHOLDING for GRINDING Electro-Permanent magnetic chucks ELETRO-PERMNENT MGNETI HUKS RILLON MGNETIS, inventor of Electro-Permanent technology, provides a range of powerful, reliable and waterproof

More information

Frameless Torque Motor Series

Frameless Torque Motor Series Frameless Torque Motor Series QUALITY AND SERVICE DELIVERED WORLDWIDE [ TECNOTION ] Tecnotion is the global authority on direct drive motor technology. We are the world s only unbundled manufacturer of

More information

LIMITED ANGLE TORQUE MOTORS

LIMITED ANGLE TORQUE MOTORS LIMITED ANGLE TORQUE MOTORS Limited Angle Torque Motors H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion (

More information

MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments

MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments + MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments Indicator Stands MarStand 815 GN With Cast Iron Base MarStand 815 MA / 815 MB / 815MG / 815 P With Magnetic Base 8-2 8-3 Post

More information

Enerpac Hydraulic Presses

Enerpac Hydraulic Presses Enerpac Hydraulic es ENERPAC Hydraulic es are available in a variety of capacities and sizes. The press frames are designed for maximum strength and durability. Strong frames and powerful highpressure

More information

Demag KB conical-rotor brake motors. Drives with unique principle

Demag KB conical-rotor brake motors. Drives with unique principle Demag KB conical-rotor brake motors Drives with unique principle 37468 Demag KB conical rotor brake motors: Demag KB conical rotor brake motors offered by Demag Cranes & Components feature a unique principle:

More information

GENERAL SPECIFICATION

GENERAL SPECIFICATION GENERAL SPECIFICATION Description FSG-2040ADII FSG-2060ADII FSG-2440ADII FSG-2460ADII FSG-2480DII Table Size 19 5/8 x393/8 (500x1000mm) 19 5/8 x59 (500x1500mm) 24 x39 3/8 (610x1000mm) 24 x59" (610x1500mm)

More information

FSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER

FSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER FSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER 1 CONTROL PANEL F S G - 2 0 / 2 4 COLUMN TYPE HIGH PRECISION 3-AX 1. Control power supply switches

More information

SC series(twist drill) for machining of cast iron, Al alloy

SC series(twist drill) for machining of cast iron, Al alloy C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200

More information

SCHMIDT-KUPPLUNG GmbH

SCHMIDT-KUPPLUNG GmbH Schmidt-Kupplung SCHMIDT-KUPPLUNG GmbH Schmidt-Kupplung About us About us In the early 1960s Richard Schmidt developed of propulsion systems for rockets in a zero-gravity environment. Among the possible

More information

INTRODUCTION Principle

INTRODUCTION Principle DC Generators INTRODUCTION A generator is a machine that converts mechanical energy into electrical energy by using the principle of magnetic induction. Principle Whenever a conductor is moved within a

More information

Diesel generator set 4BT3.3 series engine

Diesel generator set 4BT3.3 series engine Specification sheet Diesel generator set 4BT3.3 series engine 30kW-40kW 60Hz EPA emissions Description Cummins Power Generation commercial generator sets are fully integrated power generation systems providing

More information

Universal. CNC Turning machine TNA500 TNA600

Universal. CNC Turning machine TNA500 TNA600 Universal CNC Turning machine TNA500 TNA600 TRAUB TNA this name is highly regarded throughout the world for machining large chuck, shaft or bar parts. With their precision and efficiency, short setup time

More information

MAGNETIC FIELD DUE TO A CURRENT CARRYING CONDUCTOR

MAGNETIC FIELD DUE TO A CURRENT CARRYING CONDUCTOR Magnetic Field due to a Current through a Straight Conductor 1. A current carrying straight conductor behaves as a magnet. The direction of the magnetic field is given by the Right-Hand Thumb Rule. The

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your

More information

Air vane motors for special applications

Air vane motors for special applications Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high

More information

AKM Gearmotors. World Class Performance with no assembly required.

AKM Gearmotors. World Class Performance with no assembly required. AKM Gearmotors World Class Performance with no assembly required. AKM Brushless Servomotors The Kollmorgen AKM servomotors provide an unprecedented choice and flexibility from a wide range of standard

More information

10 kw, 15φ Axial flux pancake generator for 2-blade Wind Turbine

10 kw, 15φ Axial flux pancake generator for 2-blade Wind Turbine 10 kw, 15φ Axial flux pancake generator for 2-blade Wind Turbine Abstract A 10kW permanent magnet electric generator has been built and tested for use with a high tsr 5m blade diameter wind turbine. The

More information

COMPARISON OF PERFORMANCE FEATURES

COMPARISON OF PERFORMANCE FEATURES SERVODISC CATALOG A new dimension in performance If you are involved with high performance servomotor applications, there is an important motor technology which you should know about. It s the technology

More information

mechanics Rotational units made by isel Torquemotor ird B-90 RDH-M RDH-S RDH-XS DSH-S RF 1 Rotary tilting unit Indexing table B-88 B-92 B-94 B-96 B-98

mechanics Rotational units made by isel Torquemotor ird B-90 RDH-M RDH-S RDH-XS DSH-S RF 1 Rotary tilting unit Indexing table B-88 B-92 B-94 B-96 B-98 Overview Torquemotor ird B-90 RDH-M Indexing table / Rotary unit B-92 RDH-S Indexing table / Rotary unit B-94 RDH-XS Indexing table / Rotary unit B-96 DSH-S Rotary tilting unit B-98 RF 1 Indexing table

More information

CRANKSHAFT GRINDING MACHINES

CRANKSHAFT GRINDING MACHINES CRANKSHAFT GRINDING MACHINES 40 years of experience in Crankshaft Grinding Machines. The most complete range from 1.5 meters to 14 meters crankshaft length AZ is the world leader in the production of crankshaft

More information

Features of the LM Guide

Features of the LM Guide Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can

More information

tough. Live Centers Face Drivers 2013/2014

tough. Live Centers Face Drivers 2013/2014 tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers

More information

CHAPTER 3 DESIGN OF THE LIMITED ANGLE BRUSHLESS TORQUE MOTOR

CHAPTER 3 DESIGN OF THE LIMITED ANGLE BRUSHLESS TORQUE MOTOR 33 CHAPTER 3 DESIGN OF THE LIMITED ANGLE BRUSHLESS TORQUE MOTOR 3.1 INTRODUCTION This chapter presents the design of frameless Limited Angle Brushless Torque motor. The armature is wound with toroidal

More information

SHRINK FIT CHUCKS CAT BT HSK CAPTO.

SHRINK FIT CHUCKS CAT BT HSK CAPTO. SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink

More information

JUCRANK. CBN Crankshaft Grinding JUCRANK 1000 JUCRANK 3000 JUCRANK 5000 JUCRANK 6000

JUCRANK. CBN Crankshaft Grinding JUCRANK 1000 JUCRANK 3000 JUCRANK 5000 JUCRANK 6000 JUCRANK CBN Crankshaft Grinding JUCRANK 1000 JUCRANK 3000 JUCRANK 5000 JUCRANK 6000 Economical and Versatile Production Oscillating Grinding Machines for All Types of Crankshafts Technology 2 The JUCRANK

More information

Automotive Electric Drives An Overview

Automotive Electric Drives An Overview Automotive Electric Drives An Overview Dr. Dorin ILES R&D Laboratory for Electric Drives ebm-papstst. Georgen Dr. Dorin ILES (iles@ieee.org) FISITA 2008 September 14-19, Munich, Germany Targets Overview

More information

Installation Procedures

Installation Procedures For the precision ball and roller bearings supplied by MRC Bearings, skill and cleanliness while handling, mounting and dismounting are necessary to ensure satisfactory bearing performance. As precision

More information

MHS TOOLS NEWS B137G. Drills for die & mould machining

MHS TOOLS NEWS B137G. Drills for die & mould machining TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need

More information

Fast thyristors. When burning for induction heating solutions.

Fast thyristors. When burning for induction heating solutions. Fast thyristors. When burning for induction heating solutions. By Ladislav Radvan, ABB s.r.o., Semiconductors. Published by Power Electronics Europe (August 2014) Induction heating is one of the key metal

More information

SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Ball LM Guide Global Standard Size Model LM block LM rail Endplate End seal 45 Ball Ball cage Cross section 45 * For the Ball Cage, see. Point of Selection Point of Design Options Model No. Precautions

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden. Copyright 212 ABB TECHNICAL

More information

TEPZZ 7_ Z6ZA_T EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION. (51) Int Cl.: H02K 1/27 ( ) H02K 7/18 (2006.

TEPZZ 7_ Z6ZA_T EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION. (51) Int Cl.: H02K 1/27 ( ) H02K 7/18 (2006. (19) TEPZZ 7_ Z6ZA_T (11) EP 2 712 060 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication: 26.03.2014 Bulletin 2014/13 (51) Int Cl.: H02K 1/27 (2006.01) H02K 7/18 (2006.01) (21) Application number:

More information

Axial-radial cylindrical roller bearings

Axial-radial cylindrical roller bearings Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller

More information

Chucking system can be removed to allow the flange facer to be facemounted.

Chucking system can be removed to allow the flange facer to be facemounted. FF7200 FLANGE FACER 1 2015 FF72 Rugged, Heavy-Duty Flange Facers Rugged Machine Design Large, heavy-duty construction-grade bearings provide powerful, rigid performance throughout the entire machine facing

More information

PRODUCTS AND SERVICES 2017

PRODUCTS AND SERVICES 2017 PRODUCTS AND SERVICES 2017 www.wagears.com.au INTRODUCTION WA Gears Pty Ltd is a precision gear manufacturing company based in Henderson, Western Australia. We specialise in manufacturing gears and precision

More information

WHY CHOOSE ACCURPRESS TOOLING?

WHY CHOOSE ACCURPRESS TOOLING? TOOLING SYSTEMS WHY CHOOSE ACCURPRESS TOOLING? Whether you are looking for general purpose tooling or special application configurations, Accurpress is committed to the highest level of quality and customer

More information