MTS Criterion Series 40 Specifications - Comparative
|
|
- Britton Farmer
- 6 years ago
- Views:
Transcription
1 MTS Criterion Series 40 Specifications - Comparative Model 41 Model 42 Model 43 Model 44 C C C C C C C Maximum Rated kn Force Capacity lbf Force Capacity Options N, kn 1 N, 5 N, 25 N, 1 N, 5 N, 10 N, 100 N, 250 N, 100 N, 250 N, 100 N, 250 N, 100 N, 250 N, 100 N, 250 N, 50 N, 100 N, 250 N, 25 N, 50 N, 100 N, 500 N, 1 kn, 500 N, 1 kn, 2.5 kn, 500 N, 1 kn, 2.5 kn, 500 N, 1 kn, 500 N, 1 kn, 500 N, 1 kn 250 N, 500 N, 2.5 kn, 5 kn, 5 kn, 10 kn, 5 kn, 10 kn, 20 kn, 2.5 kn, 5 kn, 2.5 kn, 5 kn, 1 kn, 2 kn, 5 kn 10 kn 20 kn, 30 kn 30 kn, 50 kn 10 kn 10 kn, 20 kn, 30 kn, lbf 0.2, 1, 2, 5, 10, 20, 50, 20, 50, 110, 220, 20, 50, 110, 220, 20, 50, 110, 220, 20, 50, 110, 220, 20, 50, 110, 220, 110, 220, 450, , 1100, , 1100, , 1100, , 1100, , 1100, , , 6600, , 6600 Frame Type Guide Columns Floor-standing/ Table-top Table-top Table-top Table-top Table-top Floor-standing Floor-standing Table-top Test Zones Single/Dual Single Single Single Single Single Single or Dual Single or Dual Maximum Test Speed mm/min in/min Minimum Test Speed mm/min in/min Position Resolution mm in Power Requirements V AC V AC, V AC, V AC, V AC, V AC, V AC, V AC, 5 Amps, 5 Amps, 10 Amps, 12 Amps, 12 Amps, 10 Amps, 12 Amps, 50 / 60 Hz, 50 / 60 Hz, 50 / 60 Hz, 50 / 60 Hz, 50 / 60 Hz, 50 / 60 Hz, 50 / 60 Hz, 1000 W 1000 W 2000 W 2400 W 2400 W 2000 W 2400 W phase Space Between mm * Columns in * Vertical Test Space Standard Length mm in Extended Length mm Crosshead Travel in Standard Length mm in Extended Length mm Frame Height in Standard Length mm in Extended Length mm in Frame Width mm in Frame Depth mm Frame Weight in Standard Length kg lb Extended Length kg lb * For single-column load frames this measurement denotes the distance between grip center and column cover
2 Model 45 C C Wide C C C Maximum Rated kn Force Capacity lbf Force Capacity Options N, kn 1 kn, 2.5 kn, 1 kn, 2.5 kn, 1 kn, 2.5 kn, 150 kn, 200 kn, 500 kn, 600 kn, 5 kn, 10 kn, 5 kn, 10 kn, 5 kn, 10 kn, 300kN 20 kn, 30 kn, 20 kn, 30 kn, 20 kn, 30 kn, 50 kn 50 kn 50 kn, 100 kn, 11 lbf 220, 500, 1100, 220, 500, 1100, 33000, 44000, 2200, 4400, 2200, 4400, 6600, , , Frame Type Guide Columns Floor-standing/ Floor-standing Floor-standing Floor-standing Floor-standing Floor-standing Table-top Test Zones Single/Dual Single or Dual Single Single or Dual Single Dual Maximum Test Speed mm/min in/min Minimum Test Speed mm/min in/min Position Resolution mm in Power Requirements V AC V AC, V AC, V AC, V AC, V AC, 12 Amps, 12 Amps, 22 Amps, 20 Amps, 20 Amps, 50 / 60 Hz, 50 / 60 Hz, 50 / 60 Hz, 50 / 60 Hz, 50 / 60 Hz, 2400 W 2400 W 4400 W 9000 W 5200 W phase Space Between mm Columns in Vertical Test Space Standard Length mm in Extended Length mm in Crosshead Travel Standard Length mm in Extended Length mm in Frame Height Standard Length mm in Extended Length mm in Frame Width mm in Frame Depth mm in Frame Weight Standard Length kg lb Extended Length kg lb * For single-column load frames this measurement denotes the distance between grip center and column cover
3 MTS Criterion Series 40 Specifications - Common Force Accuracy* ± 0.5% of applied force ± 1.0% of applied force Force Range** 1 to 100% of rated force capacity 0.5 to 1% of force rated capacity Rated Force Capacity at Max Test Speed 100% Maximum Test Speed at Rated Force Capacity 100% Speed Accuracy Set speed < 0.01mm/min: speed accuracy is within ± 1.0% of set speed Set speed 0.01mm/min: speed accuracy is within ± 0.5% of set speed Position Accuracy within ± 0.5% Strain Accuracy*** Security Protection ± 0.5% of applied strain Over-force, travel limits, over-voltage and others Over Force Protection 110% Data Acquisition Rate Control Loop Rate Environmental Requirements Operating Temperature 5 to 40 C 41 to 104 F Operating Humidity 5 to 85% Non-condensing Storage Temperature -18 to 49 C 0 to 120 F Maximum Storage Humidity 90% Non-condensing Maximum Altitude 2000 Meters Motor & Drive System Ballscrews Position Measurement Additional DC Conditioning Channels Additional Digital Conditioning Channels AC Servo Motor Pre-Forced Encoder 2 channels (Examples: resistive extensometers and force cells) 1 channel (Examples: long travel extensometer and quadrature encoders) * Applicable onsite calibration services are available to meet ISO , ASTM E4. ** Exceptions apply. See your local MTS contact. *** Extensometer calibration services are available to meet ISO 9513, ASTM E83.
4 Shipping Information Model 41 Model 42 Model 43 Model 44 C C C C C C C Standard Length Frame Dimensions - Crated mm 820 x 1100 x x 960 x x 956 x x 1140 x x 1140 x x 1100 x x 1100 x 930 in x x x 37.8 x x 37.6 x x x x x x x x x 36.6 Weight - Crated kg lb Extended Length Frame Dimensions - Crated mm 1120 x 1070 x x 1110 x x 1140 x x 1140 x x 1100 x x 1100 x 930 in 44.1 x 42.1 x x 43.7 x x x x x x x x x 36.6 Weight - Crated kg lb Model 45 C C Wide C C C Standard Length Frame Dimensions - Crated mm 2620 x 1620 x x 2000 x x 1620 x x 1960 x 1760 in x x x x x x x x x x Weight - Crated kg lb Extended Length Frame Dimensions - Crated mm 2920 x 1620 x x 1620 x x 1660 x 1660 in x x x x x x Weight - Crated kg lb
5 MTS Criterion Series 60 Specifications - Comparative Model Model Model Model Rated Force Capacity kn lbf 67, , , Column Configuration Column Number Test Zones Single/Dual Dual Dual Dual Dual Actuator (Piston) Stroke mm in Actuator (Piston) Speed mm/min in/min Crosshead Speed mm/min in/min Column Spacing (test space width) mm Tension Test Space* in Standard Length mm in Extended Length mm NA Compression Test Space** in NA Standard Length mm in Extended Length mm NA in NA Diameter of Round Specimens mm in Thickness of Flat Specimens mm in Minimum Specimen Length mm in Compression Platens mm 150 x 150 (square) 150 x 150 (square) 220 x 220 (square) 240 x 240 (square) Frame Height in 5.91 x 5.91 (square) 5.91 x 5.91 (square) 8.66 x 8.66 (square) 9.45 x 9.45 (square) Standard Length mm in Extended Length mm NA in NA Frame Width mm in Frame Depth mm Frame Weight in Standard Length kg lb Extended Length kg NA * Total tension test space is the distance from the grip end with the actuator fully retraced. ** Total compression test space is the distance from the base plate to the compression grip adapter face. lb NA
6 MTS Criterion Series 60 Specifications - Common for 300 kn to 1000 kn Force Accuracy* ± 0.5% of applied force ± 1.0% of applied force Force Range** 1% - 100% of rated force capacity 0.5% to 1% of force rated capacity Displacement Resolution Displacement Accuracy Strain Accuracy*** Security Protection 0.2 um ( in) +/- 1% of indicating ± 0.5% of applied strain Over-force, travel limits, oil pressure, over-temperature, over-voltage and others Over Force Protection 110% 11 Data Acquisition Rate Control Loop Rate Environmental Requirements Operating Temperature Range 5 to 40 C 41 to 104 F Operating Humidity 5-85% Non-condensing Storage Temperature Range -18 to 49 C 0 to 120 F Maximum Storage Humidity Maximum Altitude Integrated Operations Platform (IOP) Power Requirements IOP Dimensions IOP Weight * Applicable onsite calibration services are available to meet ISO , ASTM E4. ** Exceptions apply. See your local MTS contact. *** Extensometer calibration services are available to meet ISO 9513, ASTM E83. 90% Non-condensing 2000 Meters 400 V 50 Hz / 480 V 60 Hz V AC (3 phase) mm 1040 x 720 x 1900 in x x 74.8 Encoder kg 400 lb Shipping Information Model Model Model Model Standard Length Frame Dimensions - Crated mm 2400 x 1536 x x 1690 x x 1800 x x 1920 x 1650 in 95 x 61 x x 67 x x 71 x x 76 x 65 Weight - Crated kg lb Extended Length Frame Dimensions - Crated mm 2700 x 1536 x x 1690 x x 1800 x 1520 in 106 x 61 x x 67 x x 71 x 60 Weight - Crated kg lb Integrated Operations Platform Dimensions - Crated mm 1220 x 940 x 2330 in 48 x 37 x 92 Weight - Crated kg 500 lb 1102
MTS Exceed. Series 40 Electromechanical Universal Test Systems. Affordable monotonic testing solutions. be certain.
MTS Exceed Series 40 Electromechanical Universal Test Systems Affordable monotonic testing solutions be certain. COMBINING PROVEN LOAD FRAME TECHNOLOGY WITH EASY-TO-USE TEST SOFTWARE AND A VARIETY OF ACCESSORIES,
More informationThe FMM force tester can be controlled using L1 software for limit, cycling, hold and coefficient of friction testing.
FMM FMM may be used with L1 software or with a Starrett DFC or DFG digital force gage. FMM digital force testers are compact and ideal for highvolume, lean manufacturing production. FMM testers are available
More informationServo-hydraulic Universal Testing Machine HUT Type DP
Test type Slip & Tensile Strength Permanent Elongation & Tensile Strength Static Tension Test Static Compression Test Cyclic Tension & Compression Test Test standards AC 133: 2010: 4.1 BS 8110: PART 1:
More informationServo-hydraulic Universal Testing Machine HUT Type D
Test type Slip & Tensile Strength Permanent Elongation & Tensile Strength Static Tension Test Static Compression Test Test standards BS 8110: PART 1: 1997 3.12.8.16.2 BS4482 BS4483 BS4449 ASTM A 1034:
More informationZwick. Materials testing. Product Information LTM 5/10 electro-dynamic testing machine
CTA: 113389 113384 testing machine Range of application The LTM is an electro-dynamic testing machine with a drive based on linear motor technology. 's new, patented drive concept enables the LTM to be
More informationSERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES D
SERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES D STANDARD BS 8110: PART 1: 1997 3.12.8.16.2, BS4482. BS4483, BS4449, ASTM A 1034: 10.5, 10.7 TEST TYPE Slip & Tensile Strength Permanent Elongation & Tensile
More informationC224-E031A. Autograph AGS-J. Shimadzu Table-top Type Universal Tester
C224-E031A Autograph AGS-J Shimadzu Table-top Type Universal Tester All the necessary functions in a compact body! AGS-J Autograph AGS-J Shimadzu Table-top Type Universal Tester All the necessary functions
More informationa measurable difference...
This testing machine with integrated steel plate welded frame structure, using single boom and double-function piston liner to load testing force and fixing specimen with cylindrical pin, load cell measuring
More informationStatic Servohydraulic Universal Testing Machines
Materials Testing Systems 45 Static Servohydraulic Universal Testing Machines A B C D E F G H I J K L M N O P Q R S T 46 Materials Testing Systems Static Servohydraulic Universal Testing Machines for Load
More informationElectroPuls E1000 All-Electric Dynamic Test Instrument
ElectroPuls E1000 All-Electric Dynamic Test Instrument The ElectroPuls TM E1000 is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials
More informationAn Introduction to Fatigue Testing Equipment, Test Setup & Data Collection
An Introduction to Fatigue Testing Equipment, Test Setup & Data Collection Lisa Goodwin Servohydraulic Sales Specialist & Market Manager - Instron The difference is measurable 1 Themes.. Certainty of Measurement
More informationJINAN HENGRUIJIN TESTING MACHINE CO.LTD
1. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine... 2 2. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine... 3 3. WDW Series Microcomputer
More informationHS CYCLIC CUM STATIC TRIAXIAL TEST SYSTEM
HS28.610 CYCLIC CUM STATIC TRIAXIAL TEST SYSTEM Meets the essential requirements of ASTM-5311/3999 Introduction The system is a highly advanced combination of hydraulic and pneumatic technology where σ1
More informationLD Series Operation Manual Dual Column Test Stand. Models LD5, LD10, LD30, LD50, LD100
Dual Column Test Stand Models LD5, LD10, LD30, LD50, LD100 Contents Warnings.... 1 Overview.... 3 Introduction... 3 Main Components... 4 Handheld Controller... 4 Assemblies and Features... 4 Specifications...
More informationUNIVERSAL TESTING MACHINERY STENTOR II CC - ATLAS II CC - T-DRIVE CC
UNIVERSAL TESTING MACHINERY STENTOR II CC - ATLAS II CC - T-DRIVE CC The product line STENTOR II CC and ATLAS II CC STENTOR II CC A single column testing machine for up to 5kN / 1,000 lbs - 3 models: 1kN,
More informationCompression/Tension Testing Machines
Manual Cement Compression and Flexure Testing Machines UTCM-6310/UTCM-6410 The UTCM-6310 and UTCM-6410 single and double testing chamber Manual compression and flexure testing machines are designed to
More informationMorehouse Instrument Company
The Morehouse Universal Calibrating Machine is designed to use a compression force standard, proving ring or load cell to calibrate units under test in compression and tension. The reference standard and
More informationServohydraulic Testing Machines for Dynamic Testing UFIB Series
Servohydraulic Testing Machines for Dynamic Testing UFIB Series Capacity: 10-250 kn or more S.a.e. ibertest Made in Europe (Spain) Fabricantes desde 1970 Universal Servo hydraulic Dynamic Testing Machines,.
More informationHydraulic Universal Testing Machine
WAW-E Series Computer-Controlled Electro-hydraulic Servo Universal Testing Machine Application: WAW-E Series Computer-Controlled Electro-hydraulic Servo Universal Testing Machine is suitable to test various
More informationTESTING EQUIPMENT CALIBRATION CONCRETE. established in 1972
CALIBRATION www.alfatestusa.com established in 1972 COMPRESSION TESTER (B-001 / B-004) Used to test the compression strength of concrete cubes/cylinders of different sizes. ALFA is the first company in
More informationUNIVERSAL TESTING MACHINES STENTOR II CC & ATLAS II CC
UNIVERSAL TESTING MACHINES STENTOR II CC & ATLAS II CC The product line STENTOR II CC and ATLAS II CC STENTOR II CC The single column testing machine up to 5kN - 3 models: 1kN, 2kN and 5kN - 2 sizes: 200mm
More informationOperating Instructions for Instron Model 4400 Series Load Frames
OperatingInstructionsforInstronModel4400 Series LoadFrames John D. Williams and David E. Farrow SAFETY FIRST TheInstron 4400loadframegenerateshighforces.Thecapacityoftheframeis100kN(thatis, 22.5kipsor11.3tons).Theframedoesnotknowthedifferencebetweenasteelplateandyourhand.
More informationData Sheet. Motorized Test Stand w/pc Control ESM303
Page 1 of 5 The ESM303 is a highly configurable single-column force tester for tension and compression measurement applications up to 300 lbf [1.5 kn], with a rugged design suitable for laboratory and
More informationHYDRAULIC & ENGINEERING INSTRUMENTS. Servo Hydraulic Universal Fatigue Testing System
HYDRAULIC & ENGINEERING INSTRUMENTS Servo Hydraulic Universal Fatigue Testing System Servo Hydraulic Universal Fatigue Testing System (Capacity-Ranges from kn-0kn) HI Series of Servo Hydraulic Universal
More informationWEDGE ACTION GRIPS. Sliding Wedge, Self Tightening Grip, Manual and Pneumatic
WEDGE ACTION GRIPS Sliding Wedge, Self Tightening Grip, Manual and Pneumatic General purpose sliding wedge, self tightening grips supplied with straight cut faces as standard. Two additional face options
More informationSHOCK ABSORBER/DAMPER TESTING MACHINE
SHOCK ABSORBER/DAMPER TESTING MACHINE Dampening force of a shock absorber is directly proportional to velocity and this parameter needs to be precisely controlled. A small variation of 1mm in a stroke
More informationInnovative Solutions in Material Test Equipment
Innovative Solutions in Material Test Equipment High capacity testing for metal, rebar, concrete, composites and other materials requires strong robust reliable hydraulic universal testing machines. With
More informationConcrete ASTM COMPRESSION TESTER ACCESSORIES
ADR Advanced Digital Readout Menu-driven with simple data entry. Dual input and operating modes. Peak hold and auto stress calculation. RS232C output. Pace deviation bar graph for accurate load rate applications.
More information***Before starting : view the Virtual tour located at c:/programs/msoffice/powerpointviewer And carry out the tutorials in the manuals supplied***
Fatigue Machine Turn on Chiller isolator to machine (Located behind Torque/ Tension Machine) Turn on main isolator to machine Reset Isolator switch and wait for all LEDs to go from red to off LED s Starter
More informationVERTEX UNIVERSAL TESTING MACHINE
OVERVIEW : Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of
More informationproduct manual H-4156M CBR-Specific Load Frame
09.08 product manual H-4156M CBR-Specific Load Frame this is a blank page corrector Introduction Product Description H-4156M The Humboldt H-4156M CBR-Specific Load Frame Set has been designed to provide
More informationIntroduction. Figure 1: Labeled picture of the Instron 3367 load frame.
Operation of the Instron Tensile Test Machine With an Existing Method in Bluehill 3 Software Introduction by Andrew E. Frerichs, 3/25/11 Michelle Grawe; 10/6/14 Introduction The Instron device is a displacement
More informationUniversal Testing Machine
Universal Testing Machine Model NRI-TS500-50 Please read this carefully before use. Keep it in the reference manual Page 1 20/12/2010 Table Contents Matter. Page Use of 3 To SUPERVISOR in charge of this
More informationSPRING TESTING MACHINES OVERVIEW. Spring testing has been one of the main interests of CADIS Prüftechnik GmbH from our beginning!
SPRING TESTING MACHINES OVERVIEW Spring testing has been one of the main interests of CADIS Prüftechnik GmbH from our beginning! Starting with retrofitting and improving testing machines of our competitors
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited CAL-RITE CORPORATION Naperville, IL for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International
More informationADVANCED. Cement Compression & Flexural Testing Machines.
Cement Compression & Flexural Testing Machines www.worldoftest.com/compression-flexure-bending-tester.htm ADVANCED The Compression & Flexural testing product line from Qualitest offers a wide variety that
More informationDURHAM GEO SLOPE INDICATOR
SOILS S-60 Load Frame for CBR, LBR, UCC Testing ASTM* D 883, D 266 AASHTO* T 93, T 208 * See Standards Buyer's Guide at www.dgsi.info/3000. Time-proven, reliable mechanical load frame. Operator convenience
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CAL-RITE CORPORATION 1665 Quincy Avenue, Suite 103 Naperville, IL 60540 Michael Crosby Phone: 630 355 1522 CALIBRATION Valid To: December
More informationElectroPuls. All Electric Dynamic Test Systems
ElectroPuls All Electric Dynamic Test Systems ElectroPuls All Electric Dynamic Test Systems With more than ten years of running tests over billions of cycles, ElectroPuls systems are the established materials
More informationVertical Tensile Machine
Vertical Tensile Machine Code: 11.202.100 For the determination of force, tensile resistance, elongation and tensile energy absorption (TEA) in paper or tissue. Standards: ISO 1924-1, ISO 1924-2, ISO 1924-3,
More informationuniversal testing machines page 309
steel 4.1 mechanical testing of steel 4.1.1 4.1.2 4.1.3 4.1.4 universal testing machines page 309 tensile/compression machines page 322 impact strength test page 325 bending test page 327 items page items
More informationAutograph AG-X plus Series
Precision Universal Tester Autograph AG-X plus Series C224-E053D Autograph AG-X plus Series Precision Universal Tester Reliable, stress-free workflow Power savings (power consumption during standby) 10
More informationSome customers opt to manually power their actuators. In those cases hand wheels are usually the preferred drive component.
EXTERNAL POWER SOURCE AND GEAR REDUCER All actuators require an external power source. Whether this power source be an electric motor or hand wheel Duff-Norton has the required component. Customers who
More informationForce Measurement Testing Systems
Force Measurement Testing Systems The Better Solution Starrett Innovation. Helping You Make Your Products Better. Our new Starrett force measurement systems exemplify the craftsmanship and quality synonymous
More informationInstron Model 4400 Series Load Frames
OPERATING INSTRUCTIONS Instron Model 4400 Series Load Frames THE COMPRESSION TEST Introduction Read General Operating Instructions to familiarize yourself with the Instron 4400. SAFETY FIRST Safety glasses
More informationTorsion testing machine
WTT Series Metal Wire Torsion Tester Application: WTT Series Metal Wire Torsion Tester is mainly used to test the plasticity of metal wires and ropes under torsion condition. Surface flaws of steel wires
More informationData Sheet. Motorized Test Stand w/pc Control ESM303H. Standard Features. Page 1 of 5
Page 1 of 5 The ESM303H is a highly configurable horizontal force tester for tension and compression measurement applications up to 300 lbf [1.5 kn], with a rugged design suitable for laboratory and production
More informationtesting to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5 kn 1 kn 2.5 kn Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710 mm (67.3) 290 mm (11.4) 414 mm (16.3) 1359
More informationElectroPuls. All Electric Dynamic Test Systems
ElectroPuls All Electric Dynamic Test Systems ElectroPuls All Electric Dynamic Test Systems With nearly ten years of running tests over billions of cycles, ElectroPuls systems are the established materials
More informationLTCM-500 Series High Capacity Motorized Tester (550 lbf, 2500N)
LTCM-500 Series High Capacity Motorized Tester (550 lbf, 2500N) Specification Sheet SS-FM-3135-1006 October 2006 The CHATILLON LTCM-500 Series is an economical, motorized tester ideal for production environments,
More informationVibration Test Systems
Vibration Test Systems Lansmont Vibration Test Systems are versatile, easy to operate, and reliable servo-hydraulic vibration testing equipment. Whether you are testing bare products, individual packages,
More informationTE 91 PRECISION ROTARY VACUUM TRIBOMETER
TE 91 PRECISION ROTARY VACUUM TRIBOMETER Description The TE 91 Precision Rotary Vacuum Tribometer is based on a bench mounted test chamber. A motor driven test spindle, in the form of standard rotary feedthrough,
More information3. DESCRIPTION OF SHAKING TABLE SYSTEM COMPONENTS
17 3. DESCRIPTION OF SHAKING TABLE SYSTEM COMPONENTS 3.1. INTRODUCTION The earthquake simulator is a system that consists of several components which must be designed to effectively work together. Each
More informationmoore tool reconditioning and converting to CNC for manual #3 & G-18 jig grinders
moore tool reconditioning and converting to CNC for manual #3 & G-18 jig grinders thepmtgroup 7 2 4 3 5 6 1 1 reconditioning converting to CNC &for manual #3 & G-18 jig grinders The Moore Tool Company,
More informationload frames Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 2
Damper Testing Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 1 load frames Inova has a wide range of standard load frames from 10 kn up to 2 MN. This Standard load frames will be modified to meet the
More informationSTEEL UNIVERSAL TESTING MACHINE 18.1 TENSILE/COMPRESSION MACHINE 18.2 IMPACT STRENGTH TEST 18.3 BENDING TESTS 2.4
STEEL 18 UNIVERSAL TESTING MACHINE 18.1 TENSILE/COMPRESSION MACHINE 18.2 IMPACT STRENGTH TEST 18.3 BENDING TESTS 2.4 INDEX ITEMS PAGE Alternate folding testing machine... 496 Bending and straightening
More informationCement Compression & Flexural Testing Machines
The Compression & Flexural testing product line from Torontech offers a wide variety that will fit almost any budget. Different options between models include digital or analog display, single or dual
More informationDYNAMIC TESTING MACHINES. Testing with System
DYNAMIC TESTING MACHINES Testing with System Asphalt/Bitumen New innovative modular system for dynamic Simultaneous tests with combined drive tests (optional dynamic asphalt tests) Possible combination
More informationESM1500 / ESM750. Data Sheet. Motorized Force Test Stands. Standard Features. Page 1 of 6
Page 1 of 6 ESM1500 1,500 lbf [6.7 kn] 32 in [813 mm] travel ESM1500S 1,500 lbf [6.7 kn] 14.2 in [360 mm] travel ESM750S 750 lbf [3.4 kn] 14.2 in [360 mm] travel ESM1500 and ESM750 singlecolumn force testers
More informationtesting to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5kN 1kN 2.5kN Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710mm (67.3) 290mm (11.4) 414mm (16.3) 1359mm (53.5)
More informationInspekt. Static electromechanical universal testing machines. Competency generates results
Inspekt Static electromechanical universal testing machines Competency generates results Inspekt The great amongst the universal testing machines. A real universal testing machine should allow more than
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017. Data Weighing Systems 255 Mittel Drive Wood Dale, IL Steven A. Thomas CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 Data Weighing Systems 255 Mittel Drive Wood Dale, IL 60191 Steven A. Thomas 800-397-6301 CALIBRATION Valid to: September 22, 2019 Certificate Number: L1114-1
More informationESM1500 / ESM750. Data Sheet. Motorized Force Test Stands. Standard Features. Page 1 of 6
Page 1 of 6 ESM1500S 1,500 lbf [6.7 kn] 14.2 in [360 mm] travel ESM1500 1,500 lbf [6.7 kn] 32 in [813 mm] travel ESM750 750 lbf [3.4 kn] 32 in [813 mm] travel ESM750S 750 lbf [3.4 kn] 14.2 in [360 mm]
More informationRotary Actuators. The World of Rotary Actuators. A world of experience TEST AND MOTION SIMULATION
Rotary Actuators The World of Rotary Actuators Servotest produces two types of Rotary Actuators; Dual Vane, and Torque rotary actuators. By virtue of their design, both types of actuators, when used continuously,
More informationPage 1 of 5. United Testing Systems, Inc S. Acacia Avenue Fullerton, CA William Warner, Quality Manager
IAS Accreditation Number Accredited Entity Address CL-128 1375 S. Acacia Avenue Fullerton, CA 92831 William Warner, Quality Manager Contact Name Telephone +1 (714) 638-2322 Effective Date of Scope July
More information1800 Vibration Test System
1800 Vibration Test System Lansmont s Model 1800 Vibration Test System was designed to meet the demands of a wide range of testing applications. From small products to pallet loads, the 1800 can be configured
More informationOperating Instructions
Operating Instructions MARSHALL STABILITY TESTER Models: 45-6829/01 (AP-170E-8) 45-6829/02 (AP-170E) 45-6829/06 (AP-170E-2) TABLE OF CONTENTS I. GENERAL INFORMATION... 1 II. RELATED USER DOCUMENTATION...
More informationSteering Test Rigs. The World of Steering Test Machines. A world of experience TEST AND MOTION SIMULATION 2
Steering Test Rigs The World of Steering Test Machines Steering column assemblies, are by their nature extremely safety critical, thus the ability to test them accurately and repeatedly is extremely important.
More informationLM6200 MILLING MACHINE
LM6200 MILLING MACHINE 2018 04 LM62 3-Axis Linear and Gantry Milling The CLIMAX LM6200 Linear/Gantry Milling Machine revolutionizes both the capabilities and functionality of portable mills. Four main
More informationDETAILS OF INSTRUMENTS / EQUIPMENTS NEWLY INSTALLED AT TCR ARABIA (KSA)
DETAILS OF INSTRUMENTS / EQUIPMENTS NEWLY INSTALLED AT TCR ARABIA (KSA) INSTRUMENT NAME SERVO HYDRAULIC UNIVERSAL TESTING MACHINE MODEL & SERIAL NUMBER SANS SHT4106 / 30911012 DEPARTMENT MECHANICAL TESTING
More informationSeismic Engineering Research Infrastructures for European Synergies. JRA1: Small Lab Experience. Iasi 13th July 2009
Seismic Engineering Research Infrastructures for European Synergies Structural Dynamics Research Group Department of Engineering Science University of Oxford JRA1: Small Lab Experience Iasi 13th July 2009
More informationCRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF FORCE METROLOGY:- CALIBRATION OF UNIAXIAL TESTING MACHINES
CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF FORCE METROLOGY:- CALIBRATION OF UNIAXIAL TESTING MACHINES Approved By: Chief Executive Officer: Ron Josias Executive - Accreditation: Mpho Phaloane
More informationKD45 ±20N. Description
KD45 ±20N The force sensor KD45 has the geometry of a miniature load cell. It is fastened on one side using the through holes ø3.2. There is a thread M3 for force transmission. Force transmission is displaced
More informationUNIMAT BASIC. Material Testing Machine. for the. Quality Control. with. Software (intern) for Stand Alone Usage
Material Testing Machine for the Quality Control UNIMAT BASIC 050 052 054 056 with Software (intern) for Stand Alone Usage Long-travel feeler-arm extensometer testing equipment for quality management Technical
More informationKM26z 20N; 50N; 100N, 200N, 500N, 1kN, 2kN, 5kN
KM26z 20N; 50N; 100N, 200N, 500N, 1kN, 2kN, Description The load cell KM26z is a membrane-type force sensor with small dimensions. It is suitable for measuring compressive and tensile forces. For force
More informationModel 635.XX Axial Extensometers
m be certain. Model 635.XX Axial Extensometers Product Information 100-299-881 A Copyright information Trademark information 2014 MTS Systems Corporation. All rights reserved. MTS is a registered trademark
More informationSANDNER Messtechnik GmbH
Instruction Manual High Precision Extensometer (Strain Gauge Transducers) SANDNER-Messtechnik GmbH 1 of 31 Release September 2005 Table of contents TENSOMETER-kits and basic units...5 Application and construction...5
More informationCOMPFIRE SCFT-FP_20_55_ November 2010 Fin Plate Connection to Square Concrete-Filled Tube Test Result
Reaction Frame Macalloy Bars Camera 3 Support Beam α Oven Bar Camera 2 Link Bar Camera 1 Tested Connection Jack Bar Electrical Furnace Reaction Frame Load Jack 16 November 2010 1 Oven Bar Link Bar View
More informationSCHMIDT ManualPress 300 Series
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO-compatible documentation of the results are becoming the major factors for small and
More informationAstm E83. Astm E83
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with astm e83. To get started
More informationZwick. Materials testing. Product Information Temperature chambers for AllroundLine
CTA: 126188 126175 AllroundLine Z010 with 400 mm wide temperature chamber Applications Materials and component testing over a wide temperature range, including: tests on plastics: reliable test results,
More informationHeavy Duty Actuator Type HDS and HDB With Ball Screw or Belt Drive
Heavy Duty Actuator Type HDS and HDB With Ball Screw or Belt Drive Catalog No. 0001-A Introducing Bearing Engineers new line of Heavy Duty Actuators Type HDS & HDB Construction 1. Base: Anodized Aluminum
More informationTwin-Column Motorized Tension, Compression & Cycle Tester (M5KNE & M10KNE) User s Manual
Twin-Column Motorized Tension, Compression & Cycle Tester (M5KNE & M10KNE) User s Manual EUROPEAN COUNTRIES WARNING This is a Class A product. In a domestic environment this product may cause radio interference
More informationOur test laboratory - Apparatebau Kirchheim-Teck GmbH
1 / 16 Test laboratory equipment 1 Microsection lab for crimp contacts Tensile, pressure and bending test machine: Static + dynamic Vibration test: Vibration + shock Climate tests: Temperature + humidity
More informationPendulum Impact Tester PSd 50
Pendulum Impact Tester PSd 50 034297 1435-10 WPM Werkstoffprüfsysteme Leipzig GmbH Nordstraße 15 04416 Markkleeberg Germany Phone: +4934297 1435-0 Fax: +4934297 1435-10 Email: info@wpm-leipzig.de Internet:
More informationAdventures in Building a Backyard Tensile Tester
Adventures in Building a Backyard Tensile Tester International Technical Rescue Symposium November 2-5, 2017, Golden, Colorado Mike Forbes RopeCraft mike@ropecraft.org Overview The testing of rescue systems
More informationw+b Materials Testing Systems
w+b Materials Testing Systems w+b walter+bai ag Testing Machines Industriestrasse 4, 8224 Löhningen, Switzerland, Tel. +41 (0)52 687 25 25, Fax +41 (0)52 687 25 20 E-Mail: info@walterbai.com / Internet:
More informationScope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX Gavin Lewis
Scope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX 77060 Gavin Lewis 832-428-2737 In recognition of a successful assessment to ISO/IEC 17025:2005
More informationCOMPFIRE. Reaction Frame. Camera 3. Macalloy Bars. Camera 2. Link Bar. Support Beam. Oven Bar. Camera 1. Jack Bar.
Reaction Frame Macalloy Bars Camera 3 Support Beam α Oven Bar Camera 2 Link Bar Camera 1 Tested Connection Jack Bar Electrical Furnace Reaction Frame Load Jack 22 September 2010 1 Oven Bar Link Bar View
More informationENGEL e-motion TL. All-electric, tie-bar-less. be the first.
ENGEL e-motion TL All-electric, tie-bar-less be the first. ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface excellent platen parallelism encapsulated toggle levers perfect
More informationElectronic Materials Brochure
Electronic Materials Brochure TABLE OF CONTENTS 3 Introduction to Materials 4 ISODAMP C-8000 Materials 6 ISOLOSS SL Molding Materials - Thermosets 8 CONFOR EG Foams CONFOR SC Foams ISODAMP C-8000 MATERIALS
More informationPendulum Impact Charpy PIT Series Type C 450J
Do Our Best for Your Test Pendulum Impact Charpy PIT Series Type C 450J Damper Buffering design reduces vibrations when locking the pendulum, lowering the noise and improving durability Striker Designed
More informationHigh-Precision, Direct-Drive Linear Servo Systems
High-Precision, Direct-Drive Linear Servo Systems (EM and LVD) pending The is a direct drive linear actuator servo system. Each complete system consists of a brushless linear servo motor, microprocessor-based
More information«CHARPY» Computerized Pendulum IMPACT TESTERS
«CHARPY» Computerized Pendulum IMPACT TESTERS DIGITAL & COMPUTERIZED models of 300, 450 or 750 Joules capacity 300 J PIC-300/C model 450 J PIC-450/C model 750 J PIC-750/C model ASTM E 23 DIN UNE EN ISO
More informationPendulum Impact Testing Machine PIT452G 450J
Do Our Best for Your Test Pendulum Impact Testing Machine PIT452G 450J Description WANCE offers PIT452G pendulum impact testing machine designed for determining the impact resistance of metallic materials
More informationPrecision Load Cells. The World of Precision Made Force Transducers. A world of experience TEST AND MOTION SIMULATION
Precision Load Cells The World of Precision Made Force Transducers With many years of experience in the Precision Load Cells field, Servotest has been working to develop testing equipment that exceeds
More informationModel 3400 Intrinsically Safe Load Cell
Stainless steel construction Sealed connector IP68 environmental protection Internally amplified 4-20 ma output, loop-powered Unipolar (T or C) or bipolar (T and C) Zero and span adjustment access CE certified
More informationLM5200 MILLING MACHINE
LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling
More informationSCHMIDT ManualPress 300 Series Manual Presses with Process Monitoring
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO-compatible documentation of the results are becoming the major factors for small and
More informationCAUTION. Risk of electrical shock. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.
CAUTION Risk of electrical shock. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. Dillon reserves the right to change specifications at any time.
More information