Mobile Crane. Crawler Crane. Construction Industry
|
|
- Belinda Newman
- 6 years ago
- Views:
Transcription
1 Mobile Crane Crawler Crane Tower Crane Luffing Crane Foundation Equipment Truck Crane Construction Industry
2 Construction Industry applications The construction industry has never been more complex, building projects constantly increase. This means the requirements for the cranes and ropes used are also on the rise. verope offers various ropes, rope end fittings and customer-specific special solutions tailored to the construction industry. verope provides a global retailer network for special wire ropes to serve the customers wherever the products are needed. verope offers the following services: Technical customer service Technical advice Rope inspections Theoretical rope service life calculation A broad range of rope tests such as - Tensile test up to 2500 kn - Bending fatigue test for various s - Variuos tests to determine the rotational behavior of ropes - Elongation measurement - Modulus of elasticity determination - Test to measure the rope flexibility - Diameter reduction under load measurement - Lateral stiffness determination
3 Standard rope end connections We are able to offer customized ropes with the correct endtermination for crane brands such as: Liebherr Terex Sennebogen Tadano Faun Manitowoc and much more Flemish eye ferrule-secured termination Ferrule-secured open thimble termination Open spelter socket: Metal or resin socketing Ferrule-secured eye termination End stop: either metal-/resin socketing or swaged Closed end socket: Metal or cast synthetic resin Ferrule-secured thimble termination Threaded socket swaged Open socket swaged Ferrule-secured solid thimble termination Closed socket swaged verope can also offer customer-specific solutions in addition to the standard rope end connections. Special solutions on request.
4 Rope applications for Construction Industry Mobile Crane Crawler Crane Tower Crane Luffing Crane Foundation Equipment Truck Crane
5 Mobile Crane / Telescopic Crane Auxillary verotop very flexible rotation-resistant Auxillary veropro 8 RS rotary swaged, 8-strand compacted outer strands verotop verotop S very flexible rotation-resistant very high breaking strength Auxillary veropower 8 2 rotary swaged, 8-strand parallel lay construction compacted outer strands verotop S veropro 8 8-strand compacted outer strands veropower 8 veropro strand, very flexible veropro 10 1 Only available from 30 mm diameter 2 For special applications
6 Crawler Crane Pendant Rope Auxillary Boom verotop very flexible rotation-resistant Auxillary veropro 8 RS rotary swaged, 8-strand compacted outer strands rope core covered with a plastic layer Boom Pendant Rope verotop verotop S very flexible rotation-resistant very high breaking strength Auxillary veropro 8RS veropower 8 2 rotary swaged, 8-strand Boom parallel lay construction Pendant Rope compacted outer strands veropro 8 8-strand compacted outer strands rope core covered with a plastic layer Boom Pendant Rope veropower 8 veropro strand, very flexible rope core covered with a plastic layer Boom Pendant Rope veropro 10 1 Only available from 30 mm diameter 2 For special applications
7 Tower Crane Pendant Rope Trolley Rope verotop very flexible rotation-resistant Trolley Rope verostar 8 8-strand Pendant Rope conventional strands verotop verotop E flexible rotation-resistant verostar 8 Trolley Rope veropro 8 8-strand Pendant Rope compacted outer strands verotop E veropro 8 Pendant Rope veropower 8 rotary swaged, 8-strand parallel lay construction compacted outer strands veropower 8
8 Luffing Crane Note: In case pendant ropes are used on your crane please find our rope recommendation below. verotop very flexible rotation-resistant Pendant Rope veropro 8 8-strand compacted outer strands verotop E flexible rotation-resistant Pendant Rope verostar 8 8-strand conventional strands veropro 8 veropro 8RS Pendant Rope veropro 8 RS rotary swaged, 8-strand parallel lay construction compacted outer strands veropower strand, very flexible Pendant Rope verostar 8 veropower 8 1 For special applications
9 Foundation Equipment Feed Unit Rope Hydraulic Grab Auxillary verotop P rotation-resistant Auxillary Feed Unit Rope verostar 8 8-strand conventional strands verotop P verostar 8 verotop very flexible rotation-resistant Auxillary Feed Unit Rope veropro 8 8-strand compacted outer strands verotop Feed Unit Rope veropower 8 rotary swaged, 8-strand parallel lay construction compacted outer strands
10 Truck Crane verotop very flexible rotation-resistant verotop E flexible rotation-resistant
11
12 Special wire ropes for applications in Construction Industry verotop P verotop P verotop verotop verotop S verotop S verotop E verostar 8 verostar 8 veropro 8 verotop E veropro 8 veropro 8RS veropower 8 veropro 10 veropro 8RS
13 verotop P Provides a very stable rope structure and achieves excellent bending fatigue results. Minimum breaking force mm* Inch kg/m kn t kn t 16 5/ / / / / / / / * Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special s are available upon request. mm* Inch lb/ft 1 kg/ft 1 verotop P Minimum breaking force tons 1 of 2000 lbs 16 5/ / / / / / / / ) The values are indicative only. Authoritative figures remain the metric ones! The rope is fully lubricated. The finish available as standard is galvanized, bright finish on request. Average fill factor Ordinary or Lang Lay available Rope Category Number (RCN) to determine the number of visible broken outer wires, signaling discard of rope acc. ISO 4309: RCN=23-3 Further details: Errors and omissions excepted! The cross-section shows a typical and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
14 verotop A superior balanced rope when resistance to rotation becomes most critical. Minimum breaking force mm* Inch kg/m kn t kn t 8 5/ / / / / / / / / / / mm* Inch lb/ft 1 kg/ft 1 Minimum breaking force tons 1 of 2000 lbs 8 5/ / / / / / / / / / / The rope is fully lubricated. The finish available is either bright or galvanized. Average fill factor Lay type: Lang Lay Rope Category Number (RCN) to determine the number of visible broken outer wires, signaling discard of rope acc. ISO 4309: RCN=23-2 Further details: * Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special s are available upon request. 1) The values are indicative only. Authoritative figures remain the metric ones! Errors and omissions excepted! The cross-section shows a typical and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
15 verotop S Provides excellent breaking strength and very good resistance to rotation. Minimum breaking force mm* Inch kg/m kn t kn t / / / / / / mm* Inch lb/ft 1 kg/ft 1 Minimum breaking force tons 1 of 2000 lbs / / / / / / The rope is fully lubricated. The finish available is either bright or galvanized. Average fill factor Lay type: Lang Lay Rope Category Number (RCN) to determine the number of visible broken outer wires, signaling discard of rope acc. ISO 4309: RCN=23-2 Further details: * Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special s are available upon request. 1) The values are indicative only. Authoritative figures remain the metric ones! Errors and omissions excepted! The cross-section shows a typical and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
16 verotop E Combines high breaking strength and good rotation resistance with remarkable efficiency. Minimum breaking force mm* Inch kg/m kn t kn t 8 5/ / / / / / / mm* Inch lb/ft 1 kg/ft 1 Minimum breaking force tons 1 of 2000 lbs 8 5/ / / / / / / The rope is fully lubricated. The finish available is either bright or galvanized. Average fill factor Lay type: Lang Lay Rope Category Number (RCN) to determine the number of visible broken outer wires, signaling discard of rope acc. ISO 4309: RCN=23-2 Further details: * Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special s are available upon request. 1) The values are indicative only. Authoritative figures remain the metric ones! Errors and omissions excepted! The cross-section shows a typical and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
17 verostar 8 Achieves best service life in reeving systems with single layer drums. Minimum breaking force mm* Inch kg/m kn t kn t 8 5/ / / / / / / / / / / / / / * Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special s are available upon request. mm* Inch lb/ft 1 kg/ft 1 Minimum breaking force tons 1 of 2000 lbs verostar / / / / / / / / / / / / / / ) The values are indicative only. Authoritative figures remain the metric ones! The rope is fully lubricated. The finish available as standard is bright, galvanized finish on request. Average fill factor Ordinary or Lang Lay available Rope Category Number (RCN) to determine the number of visible broken outer wires, signaling discard of rope acc. ISO 4309 till 42mm RCN=09 43mm to 48mm RCN=11 above 48mm RCN=13 Further details: Errors and omissions excepted! The cross-section shows a typical and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
18 veropro 8 Rope with very high structural stability, achieves excellent bending fatigue results. Minimum breaking force 1770 mm* Inch kg/m kn t kn t kn t 8 5/ / / / / / / / / / / / / / mm* Inch lb/ft 1 kg/ft 1 Minimum breaking force tons 1 of 2000 lbs / / / / / / / / / / / / / / The rope is fully lubricated. The finish available as standard is galvanized, bright finish on request. Average fill factor Ordinary or Lang Lay available Rope Category Number (RCN) to determine the number of visible broken outer wires, signaling discard of rope acc. ISO 4309 till 42 mm RCN=09 43mm to 48mm RCN=11 above 48mm RCN=13 Further details: * Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special s are available upon request. 1) The values are indicative only. Authoritative figures remain the metric ones! Errors and omissions excepted! The cross-section shows a typical and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
19 veropro 8 RS Provides excellent resistance to abrasion and has a very high breaking strength. Minimum breaking force mm* Inch kg/m kn t kn t / / / / / / / / / / mm* Inch lb/ft 1 kg/ft 1 Minimum breaking force tons 1 of 2000 lbs / / / / / / / / / / The rope is fully lubricated. The finish available as standard is galvanized, bright finish on request. Average fill factor Ordinary or Lang Lay available Rope Category Number (RCN) to determine the number of visible broken outer wires, signaling discard of rope acc. ISO 4309 till 42mm RCN=09 43mm to 48mm RCN=11 above 48mm RCN=13 Further details: * Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special s are available upon request. 1) The values are indicative only. Authoritative figures remain the metric ones! Errors and omissions excepted! The cross-section shows a typical and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
20 veropower 8 Provides the highest breaking strength of all non-rotation resistant ropes and offers superior resistance to drum crushing. Minimum breaking force mm* Inch kg/m kn t kn t / / / / / / / / / / mm* Inch lb/ft 1 kg/ft 1 Minimum breaking force tons 1 of 2000 lbs / / / / / / / / / / The rope is fully lubricated. The finish available as standard is galvanized, bright finish on request. Average fill factor Lay type: Ordinary Lay Rope Category Number (RCN) to determine the number of visible broken outer wires, signaling discard of rope acc. ISO 4309 till 40mm RCN=09 41mm to 46mm RCN=11 above 46mm RCN=13 Further details: * Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special s are available upon request. 1) The values are indicative only. Authoritative figures remain the metric ones! Errors and omissions excepted! The cross-section shows a typical and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
21 veropro 10 Extremely flexible rope with very high breaking strength, achieves excellent bending fatigue results. Minimum breaking force mm* Inch kg/m kn t kn t / / / / / / / mm* Inch lb/ft 1 kg/ft 1 Minimum breaking force tons 1 of 2000 lbs / / / / / / / The rope is fully lubricated. The finish available as standard is galvanized, bright finish on request. Average fill factor Ordinary or Lang Lay available Rope Category Number (RCN) to determine the number of visible broken outer wires, signaling discard of rope acc. ISO 4309: RCN=11 Further details: * Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special s are available upon request. 1) The values are indicative only. Authoritative figures remain the metric ones! Errors and omissions excepted! The cross-section shows a typical and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
22 Worldwide service and distribution With our stock-keeping program at the different verope service centers, we are able to bridge the distance between our modern rope production facility and joint venture partner Kiswire in both South Korea and Malaysia and our customers day to day requirements locally. Our service and logistics centers in Contwig, Germany Shanghai, China Singapore Houston, USA Resende, Brasil Mumbai & New Delhi, India are able to turn on short notice any inquiries into action.
23 verope has a worldwide network of professional dealers who expertly select the correct high performance rope to suit your requirements regionally.
24 St. Antons-Gasse 4a CH-6300 Zug / Switzerland Tel: + 41 (0) Fax: + 41 (0) info@verope.com
Jib Crane. Heavy Industry
Overhead Crane Ladle Crane Jib Crane Heavy Industry Heavy Industry applications Wire ropes must be capable of withstanding extreme ambient conditions and mechanical stresses present in heavy industry applications.
More informationWire Rope & Accessories
General Purpose & 19x7 CLASS ROPES MINIMUM BREAKING FORCE AND WEIGHTS FOR 19x7 ROPES Minimum Approx. breaking force Diameter wt./ft. (tons of (in.) (lbs.) 2,000 lbs.) XIP IWRC 3/16 0.064 1.57 1/4 0.113
More informationMINING ROPES.
MINING ROPES www.diepa.de QUALITY MADE IN GERMANY TABLE OF CONTENTS DIEPA Mining Ropes 4 Rope Selection 6 DIEPA MX-series 8 DIEPA ML-series 10 DIEPA MB-series 12 Rope terminations 14 DIEPA MINING ROPES
More informationGlobal technology leader in the manufacture of wire and fibre rope solutions for the world s most demanding applications
Oil and Gas Global technology leader in the manufacture of wire and fibre rope solutions for the world s most demanding applications Bridon Neptune Quay, a state-of-the-art manufacturing facility that
More informationCrane and Industrial. Wire rope solutions for the world s most demanding applications
Crane and Industrial Wire rope solutions for the world s most demanding applications General Guidance wire and rope solutions for the world s most demanding applications GENERAL GUIDANCE ON ROPE SELECTION
More informationSTEEL WIRE & ROPE FITTINGS
6 Beaver maintains a wide range of wire rope and fittings that can be used for towing and lifting applications. Furthermore Beaver has the ability to offer manufactured slings made to order. With Beaver
More informationMISSION. Bethlehem Wire Rope
Bethlehem Wire Rope Reel of wire rope ready for delivery in mid-1930s. MISSION...to build wire rope as good as it can be built, and to see that the user gets the satisfaction he has a right to expect.
More informationWire rope accessories. 5. Wire rope accessories. Index
Wire rope accessories 5. Wire rope accessories 1 General 1.1 About Hendrik Veder Group 1.2 Trade names 1.3 Certified Quality 1.4 Certificates 1.5 Key suppliers & brands 1.6 Contact information 1.7 Locations
More informationCONTENTS. DuraPlus. 10 Strands compacted semi-ip rope Container cranes, overhead cranes, floating cranes
CONTENTS DuraPlus DuraPlus DPC 8P 8 Strands compacted semi-ip rope container cranes, floating cranes, steel mill cranes, mobile cranes DuraPlus DPC 6P 6 Strands compacted semi-ip rope Container cranes,
More informationTechnical data Hydraulic lift crane LR 1160
Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600
More informationTechnical data Hydraulic lift crane LR 1160
Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600
More informationCrawler Crane LR
Crawler Crane LR 1130 EN LR 1002.03 Dimensions Basic machine with undercarriage R 6530 2970 85 6050 3040 1954 1530 3640 1250 6750 7970 3355 1360 1000 6350 440 1345 R 5700 13930 5310 Operating weight The
More informationView thousands of Crane Specifications on FreeCraneSpecs.com. Technical data Hydraulic lift crane LR 1250
Technical data Hydraulic lift crane LR 1250 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800
More informationNew paradigm for your business
1604-1000 Rev. 10 New paradigm for your business HOMEPAGE E-MAIL SEOUL OFFICE NEWYORK OFFICE EUROPE OFFICE OSAKA OFFICE www.dsr.com sales@dsr.com 145, Teheran-ro, Gangnam-gu, Seoul, Korea Tel 82-2-3420-3500
More informationGround bearing pressure 1.14 kg/cm 2. Main boom (No xx) max. length High reach (1311.xx and 1008.xx) 83 m Luffing jib (No xx) max.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 14 m main boom, consisting of A frame, boom foot (5.5 m), boom head (8.5 m), 32.3 t basic counterweight, 15 t carbody
More information6. Working radii are measured from centre of swing and under load.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 20 m main boom, consisting of A frame, boom foot (7 m), boom head (7 m), boom extension (6 m), 60.6 t basic counterweight,
More informationGround bearing pressure 1.08 kg/cm 2. Main boom (No xx) max. length High reach (No xx and 1309.xx)
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 17 m main boom, consisting of A frame, boom foot (7 m), boom head (10 m), 50.9 t basic counterweight, 20 t carbody
More information5. For max. wind speed please refer to lift chart in operator s cab or manual.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn including wire ropes (260 m and 495 m) and 20 m main boom, consisting of A frame, boom foot (10 m), boom head (7 m),
More informationCrawler Crane LR 1200 LR
Crawler Crane LR 1200 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 4600 1500 7520 8700 3740 1830 1200 7000 520 1345 R 6200 19200 7600 1200 5800 narrow
More informationSTRUCTURES & UTILITIES
STRUCTURES & UTILITIES Backed by over a century of strand-making experience, Wire Rope Industries offers premium solutions to meet the diverse requirements of engineered structural support systems. Custom
More informationCrawler Crane LR 1250 LR
Crawler Crane LR 1250 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800 narrow
More informationDrilling Profits Portable air power
Drilling Profits Portable air power Elgi, established in 1960, designs and manufactures a wide range of compressors. The company has gained its reputation for design and manufacture of screw compressors
More informationWorking Weights. Assembly Diagram. Ctwt ABC+A
14 5487--- 0607--- P3 Assembly Diagram Link--Belt Working Weights Ctwt AB+A Ctwt ABC+A Ctwt ABCDE + A lb (kg) lb (kg) lb (kg) 315,532 (143 125) 340,377 (154 395) 390,069 (176 935) psi 9.8 10.6 12.2 kg/cm2
More informationDESIGNED FOR JOB SITE RESULTS FLAT TOP TOWER CRANE CTT 361
DESIGNED FOR JOB SITE RESULTS FLAT TOP TOWER CRANE CTT 361 FROM OUR EXPERIENCE TO YOUR RESULTS The new Terex Flat Top CTT 361 continues to build on a strong legacy of Terex flat top tower cranes. Designed
More informationJosé Luis Goyoaga, Erandio SPAIN Tel Fax
José Luis Goyoaga, 31 48950 Erandio SPAIN Tel. +34 94 467 10 00 Fax +34 94 467 14 00 comercial@cablesyalambres.com www.cablesyalambres.com wire ropes for mining e the company Our Wire Ropes for the Mining
More informationHydraulic lift crane LR 1110 LR
Hydraulic lift crane LR 111 EN LR 11.2 Concept and characteristics LR 111 Standard Excellent lifting capacities thanks to optimized distribution of forces New cabin with improved and ergonomic operating
More informationÉSZAK FERR WIRE AND LIFTING SYSTEM.
k ÉSZAK FERR WIRE AND LIFTING SYSTEM www.eszakferr.hu ÉSZAK-FERR ÉSZAK FERR LTD (with company seat in Miskolc) was established in 2010. The company has a wide scope of activities. Our main acticity areas:
More informationTable of Contents. For all types of bridges, stadiums and structures:
Results by Design Table of Contents Introduction 2-5 Wire products 6-15 Full locked coil 8-9 Spiral strand 10-11 Bridge rope 12-13 PCS 14 Bridge wire 15 Movable structures 15 Socket products 16-35 Architectural
More informationMDT City. Go Topless!
MDT City Go Topless! The new MDT City Crane concept Aiming for Productivity 2 The MDT City Crane is so well thought out that you can maximise productivity from your investment without compromising on safety:
More informationTechnical data Hydraulic crawler crane HS 835 HD
Technical data Hydraulic crawler crane HS 835 HD Dimensions Basic machine with undercarriage 2860 7360 3000 1700 1120 3260 990 1200 2360 4710 5650 1220 700 4300 310 R 4050 11250 Operating weight The operating
More information(Foundation Special Specification) Auxiliary sheave is necessary
* * (Foundation Special Specification) Auxiliary sheave is necessary * SPEEDY Unparalleled efficiency that will revolutionize transport Our efforts to transform thinking about transporting equipment
More informationNew Demag DR-Bas rope hoist. Now up to. 50t. The right choice. High quality and excellent value
New Demag DR-Bas rope hoist Now up to 50t The right choice High quality and excellent value Demag DR-Bas rope hoist Are you looking for a reliable, high-performing and compact rope hoist with a lifting
More informationTechnical data Hydraulic lift crane LR 1300 W
Technical data Hydraulic lift crane LR 1300 W Dimensions Basic machine with undercarriage 6390 3000 10570 1475 1760 20 5160 3820 8520 9675 520 4260 1700 1200 00 20 7100 520 00 9 R6 8560 20365 Operating
More informationOEM reference list 2016
ABI - Delmag ABUS Kransysteme GmbH Bardella BAUER Maschinen GmbH P 22-32 Electric Hoist verotech 10 8-20 BG12 - BG50 P 20-40 Bauer Shanghai BG25 P 26, 28 BG28 P 32 P 36, 40 Beijing CSR TR280DH 280KNM 22,
More informationS5 WIRE ROPE HOISTS STANDING THE TEST OF TIME
We ve been in this business for 130 years, and that s why at Morris we know that you need a business partner that you can reply on. With this in mind our ambition is to always manufacture top quality,
More informationTechnical data Hydraulic crawler crane HS 895 HD
Technical data Hydraulic crawler crane HS 895 HD Dimensions Basic machine with undercarriage R 9760 3650 10000 5480 3675 2445 1810 3950 1610 1700 7945 9360 3975 1720 R 6360 1100 6800 620 17380 Operating
More informationMaximum productivity even on the most challenging sites.
Igo T Range Maximum productivity even on the most challenging sites www.manitowoccranes.com The Igo T range Successfully combining Power & Productivity Improving site productivity is a daily challenge.
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs and 46 ft main boom, consisting of A frame, boom foot (18 ft), boom head (28 ft), 71,200 lbs basic counterweight,
More informationPRELIMINARY. 119 kw (level IIIa) 129 kw (level IV) 33 t. Crawler telescopic crane. 38 m. Tier IVf emission. standards
119 kw (level IIIa) 129 kw (level IV) 33 t Crawler telescopic crane 38 m Tier IVf emission standards Advanced. The E-Series. What makes up the E-Series Over 20 years experience in construction and building
More informationThe new Demag DR-Com rope hoist The cost-effective alternative
The new Demag DR-Com rope hoist The cost-effective alternative NOW WITH DOUBLE THE SERVICE LIFE The cost-effective alternative. Now offering even better value Our DR-Com rope hoist has always been the
More informationFUCHS Industrial Lubricants. Wire Rope Manufacturing Lubricants
FUCHS Industrial Lubricants Wire Rope Manufacturing Lubricants WIRE ROPE LUBRICANTS FUCHS is committed to developing its product portfolio through our investment in R&D to produce high quality lubricants
More informationConstruction Machine HS enus HS
Construction Machine HS 8200 enus HS 8007.01 Concept and characteristics Basic machine HS 8200 with dragline equipment Main boom 2220.24 Pendant straps Hoist rope guide Hoist winch I Cabin Undercarriage
More informationTechnical data Hydraulic crawler crane HS 885 HD
Technical data Hydraulic crawler crane HS 885 HD Dimensions Basic machine with undercarriage R 6910 2850 8300 3500 2210 1420 4120 1400 1400 2725 5490 6750 2100 1000 4920 590 R 5520 15200 Operating weight
More informationLiebherr Service. Service packages
Liebherr Service Partnership High service standard with optimum availability Liebherr service package Up to 10 % price saving compared to individual parts Available for every service interval Available
More informationTechnical data Hydraulic crawler crane HS 8040 HD
Technical data Hydraulic crawler crane HS 8040 HD Dimensions Basic machine with undercarriage 2860 7350 3000 1700 1060 3300 1200 2340 4610 5460 R = 3900 700 4200 310 4200 990 11240 Operating weight The
More informationThe new Demag DR-Com rope hoist The cost-effective alternative
The new Demag DR-Com rope hoist The cost-effective alternative NOW WITH DOUBLE THE SERVICE LIFE The cost-effective alternative. Now offering even better value Our DR-Com rope hoist has always been the
More informationDemag portal cranes. Efficient solutions for numerous logistical tasks
Demag portal cranes Efficient solutions for numerous logistical tasks 39835-2 1 Demag a strong brand In Demag, Terex Corporation has a strong brand that stands for technologically outstanding products
More informationTelescopic Crawler Crane. Max. lifting capacity:220 t Max. lifting height:101 m Max. working radius: 88 m
Telescopic Crawler Crane LTR 1220 Max. lifting capacity:220 t Max. lifting height:101 m Max. working radius: 88 m Telescopic Crawler Crane LTR 1220 Outstanding off road capabilities and manoeuvrability
More informationOperating instructions ATLAS Climber - 700
Operating instructions ATLAS Climber - 700 Model: Three phase: ATLAS Climber - 700 hoist WARNING: All persons operating this equipment must read and completely understand this manual. All persons must
More informationLS 278H. 250 ton (227 metric ton) Hydraulic Lattice Boom Crawler Crane. Tube Boom Capacities ft. ( m)
Hydraulic Lattice Crawler Crane Tube Capacities 60 330 ft. (18.29 100.58 m) 250 ton (227 metric ton) 35 ft. (10.67 m) Live Mast Capacities On Outrigger Jacks On Side Frames 10 ft. (3.05 m) Extension Lifting
More informationYOUR SPECIALIST AROUND CABLE AND WIRE. Catalog
Catalog "upi Cable- And wirestockings, Quality based on tradition The company rupi cologne is your perfect partner for anything in Cable and rope stockings. Since 1966 we have been the market leader in
More informationMobile Crane LTM Max. capacity: 100 t Max. hoisting height: 84 m Max. radius: 66 m
Mobile Crane LTM 1100-5.2 Max. capacity: 100 t Max. hoisting height: 84 m Max. radius: 66 m Mobile crane LTM 1100-5.2 Flexibly and economically usable 2 LTM 1100-5.2 A long telescopic boom, high capacities,
More informationGround bearing pressure 0.98 kg/cm 2. Main boom (No xx) max. length Fixed jib (No xx)
The operating weight includes the basic machine with HD under carriage, 2 main winches 250 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, boom foot (5.5 m) and boom head (5.5
More informationTechnical data Hydraulic crawler crane HS 875 HD
Technical data Hydraulic crawler crane HS 875 HD Dimensions Basic machine with undercarriage R 5710 2580 8300 3500 2110 1300 1240 4020 1400 5330 2600 1000 530 6480 2240 4900 R 5520 14100 Operating weight
More informationSTEEL WIRE ROPE HIGH CARBON WIRE COLD DRAWN STEEL BAR CHUNG WOO ROPE CO., LTD.
www.cwrope.com STEEL WIRE ROPE HIGH CARBON WIRE COLD DRAWN STEEL BAR CHUNG WOO ROPE CO., LTD. Head Office & Factory 1682-4, Songjung-dong, Gangseo-gu, Busan, Korea TEL : 82-51-831-2171 FAX : 82-51-831-2174
More informationMax. lifting capacity: 100 t Max. lifting height: Max. working radius: 60 m
Telescopic Crawler Crane Max. lifting capacity: 100 t Max. lifting height: 83 m Max. working radius: 60 m Telescopic Crawler Crane Outstanding off-road capabilities and maneuverability 2 A long telescopic
More informationLiebherr 600 ton Capacity Hydraulic Truck Crane
www.baycrane.com Liebherr 0 ton Capacity Hydraulic Truck Crane New York City 11-02 43rd Avenue Long Island City, NY 11 Tel: 718 392 00 Fax: 718 349 6681 info@baycrane.com Long Island 389 New South Road
More informationTechnical data Hydraulic crawler crane HS 845 HD
Technical data Hydraulic crawler crane HS 845 HD Dimensions Basic machine with undercarriage 2870 8000 3000 1800 1330 3350 1100 1200 5000 5920 2500 1590 700 4500 330 R 4580 11860 Operating weight The operating
More informationNEW DATES NEW DATES. GPS Training for Trimble & TOPCON January Excavation & Site Layout January 14 25
Course Dates GPS Training for Trimble & TOPCON January 7 18 Excavation & Site Layout January 14 25 NCCCO practical Training & Testing January 22 24 Introduction to Tower Cranes January 28 February 1 LMI
More information400B Product Guide. Features. ASME B30.5 Imperial 85% 9,1 t (10 USt) rating. Multiple mounting configurations. 17,1 m (56 ft) three-section boom
4B Product Guide ASME B3.5 Imperial 85% Features 9,1 t (1 USt) rating 17,1 m (56 ft) three-section boom Multiple mounting configurations Internal anti-two block NATIONAL CRANE 4B The 4B Series delivers
More information2. Crane standing on firm, horizontal ground. 6. Working radii are measured from centre of swing and under load.
The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs including wire ropes (853 ft and 1624 ft) and 66 ft main boom, consisting of A frame, boom foot (33 ft), boom head
More informationTechnical data Hydraulic lift crane LR 1300 LR 1300
Technical data Hydraulic lift crane LR 1300 LR 1300 Dimensions Basic machine with undercarriage R 9750 3600 10350 6930 3000 LR1300 2250 1600 5000 1465 1700 8500 9650 4260 1870 1200 8000 400 R 6980 Optional:
More informationMobile Crane LTM Max. capacity: Max. hoisting height: 84 m Max. radius: Courtesy of Crane.Market
Mobile Crane Max. capacity: 100 t Max. hoisting height: 84 m Max. radius: 66 m Mobile crane Flexibly and economically usable 2 A long telescopic boom, high capacities, an extraordinary mobility as well
More informationMARINE FENDERS ISO EDITION FLOATING FENDERS SYSTEM FENDERS FIXED FENDERS ROPES & RIGGING SERVICE. noreqfender.no
ISO 17357 MARINE FENDERS 2016 EDITION NPF3365CTN delivered to Haugesund Port summer 2015 FLOATING FENDERS ROPES & RIGGING SYSTEM FENDERS FIXED FENDERS SERVICE Fender davits Ropes, wire, hardware Quay and
More informationPneumatic Fender solutions with market leading service and support
Pneumatic Fender solutions with market leading service and support Pneumatic Fenders from Trelleborg and Teekay CONTENTS SECTION ONE P.2 Introduction SECTION TWO P.3 The Halo Effect SECTION THREE P.4-5
More informationProduct Overview Festoon-Systems for I-Beams
Product Overview Festoon-Systems for I-Beams 2 Conductix-Wampfler Festoon-Systems Count on it! On the go! Cable trolley system program 0350 on a steel mill overhead bridge crane We move your business:
More informationDS V1. Drilling Profits. Construction Mining Oil & Gas Exploration Water-well Drilling
DS 1200-350 V1 Drilling Profits Construction Mining Oil & Gas Exploration Water-well Drilling A TRADITION OF RELIABILITY ELGi is a 50+ year-old company raised to become one ofthe world s largest manufacturers
More information00000 Series Clevis Pin Slotted Hexagon Hex Key Recommended Corresponding Part No. Part No. Size Torque Preload SLT* SLT* HEX
00000 Series Clevis Pin All clevis pins are manufactured from heat treated 416 stainless steel to provide superior strength and wear. Hardness is between 37-40 Rc. The DCD Clevis Pin is a shouldered type
More informationGIS-CH ELECTRIC CHAIN HOIST: SIMPLE, RELIABLE, SECURE.
GIS-CH ELECTRIC CHAIN HOIST: SIMPLE, RELIABLE, SECURE. GIS YOUR GENERAL CONTRACTING PARTNER FOR EFFICIENT MATERIAL FLOW. Complete range of market services for off-floor goods handling A wealth of know-how
More informationLIEBHERR LTM Ton HYDRAULIC CRANE
www.baycrane.com LIEBHERR LTM 1250-6.1 300 Ton HYDRAULIC CRANE New York City 11-02 43rd Avenue Long Island City, NY 11101 Tel: 718 392 0800 Fax: 718 349 6681 info@baycrane.com Long Island 389 New South
More informationTechnical data Hydraulic lift crane LR 1300
Technical data Hydraulic lift crane LR 1300 Dimensions Basic machine with undercarriage R 9750 3600 10350 6930 3000 2250 5000 LR 1300 1600 1465 1700 8500 9650 4260 1870 1200 8000 400 R 6980 Optional: Flat
More informationGrab System. BAUER GB 50 Hydraulic Grab Carrier
Grab System BAUER GB 50 Hydraulic Grab Carrier GB 50 Digging profits out of your projects Bauer s line of GB rigs are a perfect marriage between our tried-and-true base machines with our state-of-the-art
More informationPRELIMINARY. 92 kw. 16 t. Mobile telescopic crane. 24 m. Tier IV emission standards
9 kw 1 t Mobile telescopic crane m Tier IV emission standards Advanced. The E-Series What makes up the E-Series 197: TX telescopic crane Over 5 years of experience in construction and building of highly
More informationC a b l e s o l u t i o n s at the core of material handling performance
C a b l e s o l u t i o n s at the core of material handling performance Port of Ningbo, China Ship-To-Shore (STS) cranes ZPMC requires a customized flexible cable solution for 6 STS cranes in Ningbo,
More informationSPEC No.: ZP REVISION: 1.1 ZP ELECTRON CO.,INC. Designer. Division. Approver
TECHNICAL SPECIFICATION FOR Optical Fiber Overhead Ground Wire (OPGW) Designer Approver SPEC No.: ZP10-15389 REVISION: 1.1 Technical Supporter ZP Int ternational Division Chief Technical Engineer ZP Int
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 200 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, pulley block, boom foot (5.5 m) and boom
More informationThe unique operating principle of the TREIBMATIC / 7
Increased performance in the ROTZLER universe: The unique operating principle of the / 7 TR 030, TR 080, TR 200, TR 350 TR 030 TR 080 TR 200 Content 1. Why? 3 ROTZLER Product description 3 The concept
More informationTMS9000E Product Guide
TMS9000E Product Guide Features 90 t (110 USt) capacity 11,2 m - 43,4 m (36 ft - 142 ft) five-section full power boom Patented TWIN-LOCK boom pinning system 10 m - 17 m (33 ft - 56 ft) bi-fold lattice
More informationCONDUCTIVE COMPOUND AND CONCENTRATES CABELEC CONDUCTIVE COMPOUNDS AND CONCENTRATES PRODUCT SELECTION GUIDE
CONDUCTIVE COMPOUND AND CONCENTRATES CABELEC CONDUCTIVE COMPOUNDS AND CONCENTRATES PRODUCT SELECTION GUIDE Performance and leadership in black plastics Cabot Corporation is a global performance materials
More informationEconomical. Durable. Easy to operate. DBR rope hoist
Economical. Durable. Easy to operate. DBR rope hoist As a technology leader, we offer our customers a complete range of cranes, drives and handling technology for every application all over the world optimized
More informationpower Generation POWERING YOUR BUSINESS RELIABLE ENGINES FOR PROFITABLE POWER GENERATION
power Generation POWERING YOUR BUSINESS RELIABLE ENGINES FOR PROFITABLE POWER GENERATION IT S ALL ABOUT UPTIME AND Whether you are running our engines constantly or for emergency operations, reliability
More informationConstruction Machine HS 8300 HD. enus HS
Construction Machine HS 8300 HD enus HS 8008.01 Dimensions Basic machine with undercarriage R 35 11 12 43 8 13 11 11 7 10 7 2 19 6 7 3 26 31 4 12 8 9 11 47.2 22 8 27 1 25.2 71 R 25 8 Operating weight The
More informationLIEBHERR LTM Ton HYDRAULIC CRANE
www.baycrane.com LIEBHERR LTM 1090-4.1 110 Ton HYDRAULIC CRANE New York City 11-02 43rd Avenue Long Island City, NY 11101 Tel: 718 392 0800 Fax: 718 349 6681 info@baycrane.com Long Island 389 New South
More informationGround bearing pressure 1.1 kg/cm 2 2 HS 855 HD
The operating weight includes the basic machine with HD undercarriage, 2 main winches 250 kn including wire ropes (90 m) and 18 m main boom, 2x hose reels (1 m), each with 120 m of hydraulic hose, consisting
More information2nd EDITION STEVPRIS FLIPPER DELTA DANFORTH AC-14 SWIVEL SHACKLE DETACHABLE PEARLINK HINGE LINK LINK
STEVPRIS FLIPPER DELTA DANFORTH AC-14 SWIVEL SHACKLE DETACHABLE PEARLINK HINGE LINK LINK SHACKLE GOLDNOSE CLOSED/OPEN SOCKET GRAPNEL J CHASER 2nd EDITION JS OFFSHORE SUPPLY PTE LTD 7500A Beach Road #13-304
More informationHydraulic Impact hammers
Hydraulic Impact hammers PRODUCT range An introduction to Dieseko Group Foundation Equipment Established in1974, Dieseko Group represents several brands in the foundation equipment industry, in four product
More informationGHC75 Product Guide. Features. ASME B30.5 Metric 75% and Imperial 75%
GHC75 Product Guide ASME B30.5 Metric 75% and Imperial 75% Features 70 t (75 USt) capacity 11 m 36 m (36 ft 118 ft 1 in) four-section power boom 15 m (49 ft 3 in) offsettable boom extension 100% pick and
More informationGrove GHC130. Product Guide. Features. ASME B30.5 Metric 75% and Imperial 75%
Grove GHC130 Product Guide ASME B30.5 Metric 75% and Imperial 75% Features 120 t (132 USt) capacity 12,6 m 40,2 m (41 ft 4 in 131 ft 11 in) four-section full power boom 15 m (49 ft 3 in) offsettable boom
More informationboom extension (23 lb) wire rope. Crane breaks down for transport
ISO 9 Certified -8-84-7648 Model 5M with pedestal base handle (7 lb) winch drum boom (5 lb) with handle (4 lb) boom extension ( lb) wire rope Series 5 Portable Davit Cranes Hand or Power Winch Operation
More informationProduct Overview I-Beam Festoon Systems
Product Overview I-Beam Festoon Systems Count on it! On the go! Program 0350 cable trolley system on a steel mill overhead bridge crane We move your business: where ever materials are being handled, you
More informationHydraulic Impact hammers
Hydraulic Impact hammers PRODUCT range An introduction to Dieseko Group Foundation Equipment Established in1974, Dieseko Group represents several brands in the foundation equipment industry, in four product
More informationTechnical data Rotary drilling rig LB
Technical data Rotary drilling rig LB 24-27 Concept and characteristics LB 24 Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary
More informationPOWERGUARD Enhancing your diesel performance
Enhancing your diesel performance Enhancing your diesel performance DELIVERING FOR MODERN ENGINE PERFORMANCE TECHNOLOGIES Harness the power of today's diesel engine technologies by focusing on fuel. Our
More informationCertified to ISO 9001:2000 Standards. Standard Wire Rope Hoists
Certified to ISO 9001:2000 Standards Standard Wire Rope Hoists EMH sets the sta Standard Hoist Designs Include: Model E Monorail for single girder cranes Model D Top running for double girder cranes Monorail
More informationQUAYMATE M50 MOBILE HARBOUR CRANE
HARBOUR CRANES QUAYMATE M50 MOBILE HARBOUR CRANE A GREAT MATE FOR SMALL PORTS FOR SMALL MARITIME AND RIVER PORTS TEREX QUAYMATE M50 MOBILE HARBOUR CRANE The Terex Quaymate M50 is a diesel-electric mobile
More informationTruck Mounted Telescopic Crane LTF Max. capacity: 45 t Max. lifting height: 44 m Max. radius: 42 m
Truck Mounted Telescopic Crane LTF 1045-4.1 Max. capacity: 45 t Max. lifting height: 44 m Max. radius: 42 m Truck mounted telescopic crane LTF 1045-4.1 Economical and flexible With a long telescopic boom
More information119 kw (Stage IIIa) 129 kw (Stage IV) 40 t. 30 m. Telescopic crawler crane. Stage IV
119 kw (Stage IIIa) 129 kw (Stage IV) 40 t Telescopic crawler crane 30 m Stage IV Advanced. The E-Series. What makes up the E-Series TX10 telescopic crane Over 25 years of experience in construction and
More informationTug & Salvage. Synthetic Rope & Pendant Solutions
Tug & Salvage Synthetic Rope & Pendant Solutions When a Towline is Your Lifeline 2 cortlandcompany.com In towing and salvage, the entire operation relies on the strength and dependability of your towline
More informationMobile crane LTM Max. lifting capacity: 35 t Max. lifting height: Max. working radius: 40 m. Courtesy of Crane.Market
Mobile crane Max. lifting capacity: 35 t Max. lifting height: 44 m Max. working radius: 40 m Mobile crane Compact and economic 2 A long telescopic boom, high capacities, an extraordinary mobility as well
More informationWeight. Lift Capacity. Distributed Exclusively by: Lift Capacity at Tipping Point. Your Global Partner for Pipeline Solutions
Weight Operating Weight Distributed Exclusively by: 29 770 kg 65,632 lb Lift Capacity at Tipping Point - ISO 8813 40 823 kg 90,000 lb Lift Capacity Your Global Partner for Pipeline Solutions Vanguard VP
More information