PROFESSIONAL TAPE HEAD REPLACEMENT GUIDE RECORER CARE TM BY NORTRONICS BROADCAST STUDIO DUPLICATOR INCLUDES SPECIALIZED AUDIO APPLICATIONS

Size: px
Start display at page:

Download "PROFESSIONAL TAPE HEAD REPLACEMENT GUIDE RECORER CARE TM BY NORTRONICS BROADCAST STUDIO DUPLICATOR INCLUDES SPECIALIZED AUDIO APPLICATIONS"

Transcription

1 RECORER CARE TM BY NORTRONCS BROADCAST STUDO DUPLCATOR PROFESSONAL TAPE HEAD REPLACEMENT GUDE NCLUDES SPECALZED AUDO APPLCATONS FOURTH EDTON

2 PRECSE REPLACEMENT HEADS WTH CONSS TENT UNFORM QUALTYYOU CAN DEPEND UPON! When you use professional recording equipment for demanding professional applications, you just can t afford second best in a replacement head. We know that qualityand dependability are the hallmarks of performance in broadcasting, recording studios, tape duplication, and other professional environments where equipment downtime must be minimized and optimum audio quality maximized. Nortronics professional replacement heads are available in industws widest range for virtually all broadcasting, studio, and duplicating equipment. Moreover, each head we manufacture is built with the consistent, uniform quality that ensures that it will be equal to or better than the original head supplied by the equipment manufacturer. As a matter of fact, Nortronics is one of the world s major suppliers of heads to OEM s and chances are good thatwe builtthe head you need to replace. Professional users will also find that Nortronics replacement heads are readily available from our nationwide distributor network usually from the distributor s extensive stockwithout delays. And, it doesn t end merely with a product. We re pleased to offer technical assistance, application and installation know how, dependable delivety, and evety other support function you should expect from the company that manufactures the finest electrically and mechanically compatible direct replacement heads in the world today! A DVSON OF NORTRONlCSs FORM NO 8002A C Nortronlcs Company lnc 979 Prlnted in U S A

3 NDEX To Find Your Nortronics Replacement Head:. f you know Recorder Model Number and Head Track Style, refer to Sections A, B, C or D for Head and QK ing Hardware, if needed. 2. f you can't find your recorder in these sections, but know the recorder manufacturer's Head Part No., refer to Section E. 3. f you know the Norhonics OEM Head Number, refer to Section F to determine the RecorderCare Number. Manufacturer's Listed n This Book Amega (Rangertone) Ampex Ampro (nstatape) ATC (Gates](Harris) AudiCord Audiotronics (ATC) Automatic Electric (Electronic Secretary) Beaucart (UMC Electronics) Becht Broadcast Electronics (see Spotmaster) Brush [Clevite) Cetec CodeAPhone (Fordl Collins Concertone (Beriant) Crown nternational Cuemaster (Consolidated Electronics) (Cepak) Dictaphone (see also Metrotech) Echoplex (Market)(GibsonMaestro) Electro Sound Electronic Secretary (see Automatic Electric) Fairchild Fender (EchoFonic) Ford ndustries (see CodeAPhone) Gables Garner Grindley (Tad) Harris (Gates)(ATC) lnfonics nstatape (see Ampro) nternational Audio (Alpha) nternational Tapetronics (TC) nternational Video TC (nternational Tape) Lockheed Aircraft Service Lyrec Macarta (see SMC) Magnasync (see Moviola) Mag n ecord (Telex) MCA MC Metrotech (Scully) Micro Magnetics 3M (see Wollensak) Moviola (Magnasync) Muzak Newcomb Otari Pentagon Pioneer Presto RapidQ [Edco) [Garron) [Stacor) RawdonSmith (Multitape) RCA Recordex Revox Schafer (Cetec) Scully (Scully/Metrotech) (Dictaphone) L. J. Scully Showchron (Honeywell) SMC (Macarta) (SonoMag) Sparta (Cetec) Spotmaster (Broadcast Electronics) StancilHoffman Sundstrand [United Control) Tad (see Grindley) TapeAthon Tapecaster Teac Technics (Panasonic) Telex (Magnecord) (Viking) Vega Viking [Telex) Wollensak (3M) Reel to Reel PAGES 25 Replacement by Manufacturer & Model Number Broadcast Cartridge PAGES 6 Replacement by Manufacturer & Model Number Duplicators Copiers PAGES 23 Replacement by Manufacturer & Model Number Speciatized Audio PAGE 4 Replacement by Manufacturer & Model Number Cross Reference PAGES 520 Manufacturer Head Part Number to Nortronics Part Number Head Specifications & Accessories PAGES 23 m E E E Reference Notes and Abbreviations PAGE 32

4 ~ Model No.. A2 A22 A22 Track Ref. RPor Style Note RPE 2TS 7 FT 5 2TM 7 2TS 7 FT 5 2TM 2TS FT f AG300 AG3002 2TS 20 AG300 4TS 20 AG3004 4CH 2" 7 AG305 FT Play AG3052 2TS Play AG305 4TS Play AG305 4CH 4' Play AG3 FT 4,20.27 P 2T AG32 2TS P 4T: AG3 4TS P 2TS AG355 FT P 2T AG355 2TS P 4T: AG440 FT 23 P 2T AG440 ZTS 23 P 4T: AG440 4TS 23 P 2T: AG440 4CH2"44 AG440B FT 23 P 2T AG440B 2TS 23 P 4T AG440B 4TS 23 P 2T AGMOB 4CH 2" 44 AG440C FT.2T23 P2T AG440C 2TS 23 P 4T AG440C 4TS 23 P 2TS AG440C 4CH 2'' 44 AG445 FT P 2T AG445 2TS P 4TS AG445 4CH 4" AG445B FT P 2T AG445B 2TS P 4TS AG445B 4CH /4" AG445C FT P 2T AG445C ZTS P 4TS AG445C 4CH 4'' AG0..~ FT P 2T AG0 2TS 2 P 4TS AG0 4TS 22 P 2TS AG0! 4CH 4" AG600 FT5 AG600 2TM. 2TS 2 AG600 4TS 22 AGGOOB FT 5 AGGOOB 2TM. 2TS 2 AGGOOB 4TS 22 AL0 2TS 2 AL0 4TS 22 AL0 4CH 4'' ATR700 ATR700 ATR700 PR0 FT 5 PR0 2TM 5 PR02 2TS 7 P 4T PR02 4TS5 300~ TS TS 400 4th Head or Combo rst time c t t t t t t t t t87 Record Head & OK lv) t t t t t Playback Head & OK t t i t '76 ~. 902t t t t t t t t76 Erare Head & OK 925t t t t t t t t t t t t t t t t t t t t t Track Ref. RPor 4th Head Record Playback Model No. Style Nates RPE or Combo Head & OK Head & OK CH2"7 3 FT 32 2TS 7 37 ~.. 4TS 34 ]4CH/2" TS TS FT 2TS 7 2TS FT TM 7 FT 5 2TM TS5 602~ FT TM Serler 2TM Serler, ZTS serer 4TS TS TS CUEMASTER (CONSOLDATED ELECTRO MK FT MK V FT MK V FT MK V ZTS CONCERTONE (BERLANT) v02 FT 4 v02 2M4 4v02 2s 4 4v02 4s 4 v02 3c 4,ll v02 4C4. 3A FT 3A 3A~l 3c 4, 3A 4c 4,ll 3AX FT. 4 3AX 2M 3AX 2s 3AX 4s 5RX FT 3R X 2M 3RX 2s 3RX 4s 8RXD55 FT BRXD55 2M4 BRXD55 2s BRXD55 4s 4 BRXP FT 4 8RXP 2M 4 BRXP 2s 4 BRXP 4s 4 BRX FT BRX 2M 8RX 2s Erase Head & OK t ".L_ "L t t86 840t nlqline ~ t t Rr: CS CEPAK) t t lo lo6 2003tl tl lo lo _ t06 PRBl E F 4 PRBlEF4 900t t t t t lo t t ' t ' lo lo t t t '

5 ~ ~ Tape Head acements for: ReeltoReel Model No. CONCERTOF Track Style Ref. Notes i (BERLANT RPor RPE 4th Head Record Playback Erare or Combo Head & QK Head & QK Head & QK Model No. (Con ued) CX8 FT ES5 ES.5 ES.555 ES.555 ES.555 ES555 ES.555 Track Style Ref. Notes RP or RPE 4th Head Record Playback Erase 0 Combo Head & QK Head & QK Head & QK RX. 4s C540.GM 2M CX MARK V FT CX822 2s MARK V 2M 840 +lo CX822.P4 j 2s. 2M P4S RE MARK V 2s CX MARK V 4s CX824P2 4s. PZS RE MARK VC 2s NS CX TWR FT SL724 RE TWR 2M SL TWR 2s SL TWR 4s SL TWR FT SP34 2M LR TWR 2M SP324 4s LR TWR 2s 4 t SP TWR 4s SP SERES FT SP724 4s SERES 2M SP80 FT SERES 2s SP802 2M SERES 4s SP SERES FT SPR74 4s SERES 2M SP844 4CH SERES 2s SS702 2M RE SERES 4s SS722 2s RE s SS724 4s RE ST FT ST 2M SS802 2M T 2s SS822 2s ST 4s SS824 4s SERES 60 SERES 60 SERES 60 SERES FT4 2M4 2s 4 4s SS400 SX70 SX702 SX7 2s 9 FT 2M FT SERES 4C SX72 2M K 2s fi SX722 2s M SX722.P4 2s. P4S RE M SX ;2:2A 2s SX724P42 4s. PZS RE :2:2A 4s Trail Head SX8ll M 8 RP SX s 4s RP 5232 SX822.P4 2s. P4S RE M RP 530 SX s SX824PZ 2s. P2S RE D 4s GCB RP GCP RP D 4s RP GCSX 2s 9 RP s RP R 4s RP SERES FT PK FT SERES 2M SERES 2s ST P SERES 4s M 2 RP s s s s NS 40 FT s M s s s s s FT M s s CROWN NTERNATONAL A5 2M LR s LR A34 2M LR A324 4s LR A.34 2M LR BC80 FT 8 EiC802 2M 8 BC BC824 4s8 EX80 EX802 8x822 2s 9 8x824 4s 8x024 4s 5x40 0x402 8x422 2s 9 CBD ZM CBF FT C744 4T. 4C C844 4c CD 2M9 ClDS 2s CF FT CPDS 2s CPF FT CR rx7i.. CX72 CX724 CX724.P2 cx744 4s. P2S 4T. 45 4C ES.5 FT 4" ES5 2TM 4" ES.5 ES5 ES.5 2TS 4" 4TS 4" 4CH l4" (2 4CH 2" 8CH " FT 4" P TM 4" P TS 4" P TS 4" P NTERNATONAL TAPETRONCS (TC) 8500 FT FT TM!; 9+66 RP RP RP TM TS 2003D TS 2003D TS TS FT 99 FT 99 2TM TM TS c TS her TM TM TS " 2TS 2003D " 4TS

6 ~~ Tape Head Replacements for: ReeltoReel Model No. Track Ref. RPor 4th Head Record Playback Eras Style Notes RPE or Combo Head& QK Head & QK Head & QK Track& Ref. RPor 4th Head Record Model No. Style Notes RPE or Combo Head & QK Playback Head & QK Erare Head & QK TS Series FT , FT , TM TM TS TS TS 8202 Muzak 2TM45 i i J AV70M 2s RP 20 SM30 2s RP 20 SM304 4s RP 2 TX04 4s RP TR5328 8CH " 9885 TR CH 2" 9 TR CH 2" 9988 MAGNECORD MAGNFCnRll ftf (TELEX) FX 8358._._ DMT Series 2s DST Series 2s F358 M30 Series M33 hlnhic M80 M9l M90 P60 P75 FT MBO;M90:P60;P75 M80.M90.P60.P75 M80.M90.P60.P75 PT6 PT63 ~. S356 S iii : ; M s s s t t88 4s 40 2s s 2s FT FT Ml 802 2s s F H ZM H s JH6 6CH 2" JH6.8 8CH " JH24 24CH 2" JH246 JHllO JHllO JH CH 2" FT 4" TS /4" CH " METROTECH 400L 8T /4" A 54P 56A 56LP 56P 523A 523P 525A 525P 526A 526LP 526P 527AL 527LP 53A 53R 533A 533R 534A 534R 543A 543R 545A 545R 546A 546R 547A 547R 552A 552L 554A 554L 555A 555L 3M (See WOLLENSAK) ZTM P TM P CH. 4T P 860 4CH. 4T P 860 4CH. 4T P 860 2TS P TS P TS P 860 4TS P 860 4TS P 860 4TS P 860 4TS P 860 4TS P 860 4TS P 860 FT, FT i TM ZTM TM TM TS TS TS TS TS TS TS TS CH.4T CH.4T CH. 4T CH. 4T CH. 4T CH. 4T ARS000 2TS Mark.2 2TS Mirk.4 4CH.~ 2'' MTR 60 MX..FL MX..QXHD MX8 MX.8 MX.8 MX7000 MX.7000 PONEER RT TS FTM 2TP CH 4" TS 4TS P C FTM CH 4'' 2TSP TS 4TSP FTM ?+rn? ~ RT RT RT RT2044 4CH 5604t PRESTO PB7 PT PT RC RC RC24 FT RC RD s t 625 4s 800 FT M s s FT M s s FT M s s RCA C t ~ , RT9 Log 4CH. 4T RT.2 FT RT.2 2TS RT.22 2T RCart TP.66 6mm 495 A77 FT A77 2s t ? A.77 4s A.700 2s A700 D36,E36,F36,G36 t D36,E36,F36,G36 D36,E36.F36,G36 FT FT ? 2s AL VLR Logger CH " 38 RPE 9887 RPE 9888 RP CH 2" 38 RPE 9998 RPE 9995 RP 2FT FTM 4" TM i4" TS 4" TS 4" FT 255 FTM 4" P 90 ZTM 4" P E 9999 E

7 ~ 4 Ref. Tape Head Replacements for: Model No. SCU LLYME :i FT FT t FT L. J. SCULL' LJ.0 R70/ARP76 R70iARP76 R70iARP76 R70iARP76 R70lARP76 Track ~ Style 2TM 2TS 4TS Ref. Notes RPor 4th Head Record Playback Eras RPE or Combo Head&QK Head& QK Head &QK P 9202 P 9202 P 8600 FT TM TS TS CH TAPEATHON CT. CT TM ] Pair Heads 7405L 7404U 720,800 4TMlS FT TM TS TS t L2 ZT T 2CH 5832t L L44 4T T 4CH L8 8T L8.8 8T FT 903t t FT t66 925t66 925i66 TFAP Reelto Reel Model No. 2TS 4" P CH " 6CH 2"! ~, t TCA4O 4CH TCA4 TCA42 0 ZTS 0 4TS 200 4CH RS0US RS.6US Studio 96 Studio 96 Studio 96 Studio 96 Studio 96 Studio 96 Studio 96 Studio * Track ~ RPar 4th Head Record Playback Erase Style Notes RPE or Combo Head& QK Head& QK Head& QK TS r TS ~ t TS '66 903t85 9 9f TS ~ TS r t L t t t c t *66 4TS CH TS TS TS 4 4TS 4 4TS 4 TS 4 4TS 4 TS 4 RP RP RP RP RP RP t OL TS TS 4 2T S TS ~ 9203t t CH '85 20 TS RE TS RE TS TS CH =T TS 9203t TS OlOSRA ~ ; TS : 4 :E 8607t its j000 TS 4 564OL66 iol0 TS $300 TS ,0 TS TS TS TS 4TS 4CH 2TS 8608 (P 8608 (P t85 S2T 4TSP 8608t t TS FT TM L 2TS L 4TS L FT ~ L 2TM L 2TS L 4TS L FT L 2TM L 2TS L 4TS L 800 2TS 4TS

8 Nortronics Tape Head Replacements and Conversion Guide for: Broadcast Cartridge Recorders NTRODUCTON Nortronics heads are standard as original equipment on most broadcast cartridge machines, and the tables in Section B should permit the selection of the correct replacement head for over 90% of the transports in existence. f the machine has a Nortronics head it can be identified by the OEM part number stamped on it, such as "PB2H7K" or its equivalent RCD number "200 ". Crossreference between OEM and RCD numbers is given with Head Specs in Section F. REPLACEMENT L ST NG. The first column of the following machine/head listings gives the recorder model number and indicates if it is a (2channel heads) or a Stereo (3channel) machine. Delay machines are always mono, but may use either singlechannel or twochannel heads. 2. The second column gives the machine manufacturer's head part number, which probably will not be stamped on the head, but which will most likely appear in the parts list in the machine maintenance manual. 3. The third column gives head function. Each machine usually has two heads; one to record program and cue, and the other head to play program and cue. recorders use the top channel for program and the lower channel for cue, utilizing twochannel heads. Early mono machines incorporated single channel heads, one to record and play program, and the other to record and play cue; no monitoring during recording was possible as in current "NAB Standard" machines. (See "NAB CONVERSON" below for possible modification to twochannel heads.) Stereo machines use threechannel heads, with the program on the top two channels and cue on the lower. Playonly machines have only one active head, playback, and often place a dummy head in the record position to support the tape for better guidance. Delay cartridge recorders generate the typical seven second time delay needed for live telephone talk shows. They use a special combination eraserecord head next to the capstan, plus a normal play head located in the left position. The tape sequence is play, erase, record, delay, and again play. Early delayonly machines used singlechannel heads, while the more recent machines have two channel heads so they can also be used for conventional playback and record. 4. The fourth column (" Type") shows the mounting style of the original heads. The first cartridge machines used exclusively rearmount heads with the /428 threaded mounting stud. Recent models use mostly nomount heads which are easier to install and more convenient to adjust. Be sure to verify the head mounting style on your machine as it may have been converted to nomount heads with the aid of a Nortronics OK 4 cartridgemount kit. 5. The fifth column ("Orig. Head") indicates the Nortronics RCD head number to replace the original equipment heads. n some cases a twochannel head is specified as a replacement instead of the original singlechannel head furnished on early recorders; if so, use only one channel of the head. Note that the part number for a rearmount head is derived by adding to the equivalent nomount head, i.e. 200 becomes the 205 rearmount head. 6. The sixth column ("Duracore") indicates the equivalent longwear Duracore head, when available, and is usually the regular head number with the letter D added. Some machines are supplied with Duracore heads as original equipment. 7. The seventh column ("No Conversion") shows the heads and QuikKit to convert from rearmount heads to nomount, when practical and feasible. On certain Harris and RCA machines, as indicated in the application notes, conversion is not recommended, 6 NAB CONVERSON The vzry early cartridge machines equipped with singlechannel heads can sometimes be converted to "NAB monitor" by replacing the singlechannel heads with twochannel types. However, this requires modification of the electronics to separate the record and playback functions, and can be a fairly difficult task. Write to NORTRONCS RCD giving make and model of recorder and we will try to give assistance when possible. CAUTON Care should be taken to avoid striking the face of the tape heads with any hard object and this does include the cartridge itself, which can dent the head face if inserted at an angle. Use of a holddown spring and sideguide rail is highly recommended. Penetration of the head into the cartridge should be set at 9/32in. Excessive penetration will cause faster head wear and possible tape skewing. QU KK TS QK4 installs two nomount Bsize heads on a cartridge transport. t includes micrometer adjustments for head position, a cartridge holddown spring, and sideguide rail to control :artridge insertion. QK0 installs two nomount Bsize heads, with provision for third head. Third bracket not includedorder QK2 if needed. ncludes phono jacks and head plugs, plus cartridge sideguide rail and holddown spring. QK2 is the single Bsize head bracket and mounting screws to fit either QK00 or QK4. QK4 Type 2Head Nest

9 Tape Head Replacements for: Broadcast Cartridge Recorders R ECOR DE R MANUFACTURER AND MODEL Mfgr. Head No. ORGNAL HEADS Head Function NORTRON CS R EP LACEM E N T Original Dura No Type Head core Conversion SPECAL NOTES c CT20,30, Record Program & Cue No D Playonly machines 50 Series 903 Play Program & Cue D have no record head. Use 7605 for dummy CT20, 30,40, 9085 Record Program & Cue No 570 record head. 50 Series Stereo 902 Play Program & Cue D Criterion CP, CP2, CP3 Criterion CP, CP2, CP3 Stereo P, P90, PB, PB90, PC, PC Record Program & Cue Rear D * Playonly machines 200 Play Program & Cue D have no record head. Use 7605 for dummy 2006 Record Program & Cue Rear D * record head Play Program & Cue 5757 *Conversion to No heads not 2000 Record/Play Program 2000 RecordlPlay Cue Rear ;:A4 recommended. 00,0 05,06 Stereo 0, Dummy Head* Play Dummy Head* Plav Record Play No No No 570 D D D *Playonly machines substitute dummy head for record head. 20,2 25, 26 Stereo Record Plav Record F 30,32,34,36 Network Delay Play 3, 33, 35, 37 Delay 40,4 45,46 Stereo 27 4Chan. Play Record Play M: :nt No No D X xxxx x2xxxx Stereo BH00 Dummy Head' No D *Playonly machines BH300 Play D substitute dummy head for record head. BH00 Dummy Head' No BH0 Play D 2xxxxx BH200 Record No D BH300 Play D 2x2xxxx Stereo BH400 Record BH0 3X XXXX Dummy Head' BH300 3X2XXXX BH0 Dummy Head' 4X XXXX Record 4x2xxxx Stereo BH300 BH400 BH0 Record No D 570 D No D D No D D 2X xxxx BH00 Dummy Head* No D B H 300 Play D 7

10 ~ ~~ ~ Tape Head Replacements for: Broadcast Cartridge Recorders NORTRONCS REP LACEME NT RECORDER ORGNAL HEADS MANUFACTURE R Mfgr. Original Dura AND MODEL Head No. Head Function Type Head core J ZlX2XXXX BEAUCART (UMC ELECTRONCS) Continued Stereo BH00 BH0 22xxxxx BH200 BH300 22XX0 Delay Dummy Head* Play BH200 Record No D PAZH44R EraseRecord BH300 Plav D 22X X02 Delay BH200 Record No D B EF4J Erase 804 BH300 Play D 22x2xxxx Stereo BH400 Record BH0 22x5xxxx Stereo BH4005 Record No B H 0 Play D 642E2 Stereo Record Program & Cue No D Play Program & Cue 5707 No Conversion SPECAL NOTES 2 P, P90, 2302 Record/Play Program Rear 205 Requires circuit A : : ; PB, PB Record/Play Cue 20 l4 modification. See Nortronics Form E Record Program & Cue No D Plav Proaram & Cue D CT85,75,753,754, 756, 757,903,906, Cuerac 983,986, Cuerac Stereo Record Play M: EraseRec. Prog. & Cue Rear 65 Play Program & Cue 20 Record Program & Cue Rear D Plav Proaram & Cue D RP Program Rear 205 $:A4 NOTES: RP Cue RecordProgram & Cue Rear PlavProaram & Cue RecordProgram & Cue PlayProgram & Cue 2007l D ;nt D 4xxxxx No D F42XxXXX BH200 Record BH A,642A Record/Play Cue 20 HARRS (GATES) (ATC) M5944 M62,M M622, M624 Stereo Compact Criterion,, ll Compact Stereo 'Playonly machines substitute dummy head for record head. RecordPlay Program Rear 205 Playonly machines ; 202: have no record head. For dummy head use #7605. Playonly machines have no record head. For dummy head use #7605. RecordProgram & Cue 2052D 2002D 4 head only. PlayProgram & Cue Eit % 2052D 2002D RecordProgram & Cue PlayProgram & Cue 5707l Criterion 80 RecordProgram & Cue Rear D 2007D' numbers in Section E. 3. Use #7605 for dummy record + head 5703D 570 D 4. Conversion to No heads n : P r o a r a m & Cue :;?E Note Criterion 80 Stereo Criterion D ZOOD' Criterion 90 Stereo ;ybo Erase/Record No 603 KSP0 Delay ~~ D 570 D not recommended.

11 Tape Head Replacements for: Broadcast Cartridge Recorders NORTRONCS RECOR DE R ORGNAL HEADS REP LACEME NT MANUFACTURER AND MODEL Mfgr. Head No. Head Function Original Dura No Type Head core Conversion Encore Series Playback 4000 Dummy Head* Record PD Series Playback 4002 Record RP Series SP Series WP Series RP Series SP Series WP Series 3D Series Stereo Playback 4000 Dummy Head' Record RPD Series Delay 400 Playback Dummy Head" Record Combo Erase/Record Playback M: :nt D 7605D 2003D SPECAL NOTES 'Playonly machines substitute dummy head for record head. No D **Original heads are No Playback No 4000 Dummy Head* Record D Duracore. 200 D 7605D 2003D No 570 D 7605~ 5703D D 200 D 7605D 2003D 3D Series MACARTA (See SMC) Stereo Playback No 4000 Dummy Head* Record 5703D 7605D RQ Series Record No D Playback' D RQ Series Stereo Record No D Pla ybac k Playonly machines have no record head. For dummy head use #7605. RT7A Record/Play Program4 Rear Record/Play Cue 205 RT7B, RT7C. RT7D2 RTa, RT7, RT27, RT37 RTa, RT 7, RT27, RT37 RT25, RT26, RT27 Stereo RT25, RT26, Note 5. RT27 Stereo RT25A, RT 26A. Note 5. RT27A RT25A. RT 26A. RT27A SCHAFER (CETEC) Stereo Record/Play Program4 Rear Record/Play Cue Record Program & Cue4 Rear D Play Program & Cue D Record Program & Cue4 Rear Play Program & Cue 5752 Note 5. Record Program & Cue4 No D Play Program & Cue D Note 5. Record Program & Cue4 Play Program & Cue Record Program & Cue4 Play Program & Cue Record Program & Cue4 Play Program & Cue No No No D D 200 D 5703D 570D ;22; 42 Note 3. Note 3.. Program head is next to the capstan NAB monitor con 200 version of RT7 series to twochannel heads is described in Nortronicr Form #7407. Order a copy from RCD Div. of Nortronics. Different heads are specifiedfrom those on this sheet. 3. QuikKit conversion to No heads is not recommended. 4. Playonly machines have no record head. Use #7605 for dummy head, (No) or 7655 (Roar ) 5. "A" Series takes different record head from older "nona" machines. Audiof i le PB2H4R RecordProgram & Cue No PB2H7K PlayProgram & Cue D Audiofile Stereo PB3Q4R RecordProgram & Cue No D PB3Q7K PlayProgram & Cue D Playonly machines have no record head. For dummy head use #7605.

12 ~ ~~ Tape Head Replacements for: Broadcast Cartridge Recorders NORTRONCS RECORDER ORGNAL HEADS REPLACEMENT MANUFACTURER AND MODEL Mfgr. Head Function Original Dura No Head No. Type Head core Conversion. SPECAL NOTES 05/08 PG H7KN Record/Play Program No D PG H7KN Record/Plav Cue D 208 4T Stereo PB2Q7K Play Program NO 8608 Notes, 2 Notes, 2 NOTES:. OK 4 needed if machine has rearmount heads. 245 & 248 & 2 Carousel, 0, 5 0, 70, 72, 790 CaroStat,Mark PB2H2K Play, Program & Cue No 2000 Notes, 2 2. Playonly machines have no record head. Use #7605 for dummy head & PB307K Play, Program & Cue 252 Carousel, 2, 52, 572, 72, 722, 792, Mark Stereo 560, 570, 590, PB2H4R Record, Program & Cue Note 770,790 PB2H7K Play,Program & Cue Mknt %: %: 572, 592, 772, 792 Stereo 593,793 Delay PB3Q4R Record, Program & Cue No D Note PB3Q7K Play, Program & Cue D PA HC44R Erase/Record Program No 626 PBlHY2K Play Program 2600 No 2o0 2405/2408 Carousel PG H7KN Play Program Notes, 2 PG H7KN Play Cue SPARTA (CETEC) CD 52 R/P/E (Combo Head) Mt:nt ; ; 62: QK 42 BP, BP22, BP22B. BP22C, CP5, Play, Port PlayProgram & Cue Side P, ZOORP, Record/PlayProgram Rear P, 300RP Record/PlayCue 205 MC04,3OOB,300C, 8900 RecordProgram & Cue No ~OOP, ~OORP, aoop, PlayProgram & Cue aoow, 4,455, 460,465, Century MC204,200P, 200RP RecordProgram & Cue No D 4620,4625, Century Stereo D D NOTES:. Playback units take play head only. 2. Early units with rear mount heads need OK. 3. For dummy head use # P. 600RP. 4520, PlayProgram & Cue D OK 4 t 303,305, ,0,5 605,60,070, threel70, ,305, 0,605, 60,070RPS, 2000 Stereo 3000, 4000, 00, 5300, , 4000, _ , 50 Stereo 0,070 Delay 3000 Delay DM2RB DMB~ DM2RC2 DM~ c2 DM3RB DSA DM3RC2 ~ ~3 ~ P $3 LMR4 LMP,4 LSR4 ~Sp.4 DL2C DMB DL2D LMP RecordProgram & Cue PlayProgram & Cue RecordProgram & Cue PlayProgram & Cue RecordProgram & Cue PlayProgram & Cue RecordProgram & Cue RecordProgram & Cue PlayProgram & Cue RecordProgram & Cue PlayProgram & Cue RecordProgram & Cue PlayProgram & Cue RecordProgram & Cue PlayProgram & Cue Combo EraseRecord PlayProgram & Cue Combo EraseRecord PlayProgram & Cue Rear D D 200t4 NOTES:. Play units take play heads only D Rear No 2003D4 200D,4 570 D,4 Rear D 200[4 No D 2. Special narrow C size (3/8 wide) heads used on some models. Use only where needed. 3. Early units. 4. Later units furnished with Dura 5. Additional head part numbers in Section E.

13 ~ Tape Head Replacements for: Broadcast Cartridge Recorders RECORDER MANUFACTURER AND MODEL TAPECASTE R 600P. 600RP 700P. 700RP 700PS. 700RPS X700P, X700RP X7OOPS, X700RPS Stereo Stereo ORGNAL HEADS NORTRON CS REPLACEMENT Mfgr. Head Function Original Dura No Head No. Type Head core Conversion PG H7KR Record/PlayProgram G H2KR Record/PlayCue PB2H7KR3 Record & Play s2 Rear PB2H7KR6 (2 heads, same) PB2H7KR64 RecordProgram & Cue PB2H7KR6 PlayProgram & Cue PB3Q7KR64 R/PProgram & Cue2 ( head only) 9;;![!%: 200\4 200 R/PProgram & Cue ( head only)* MEt 5754O, SPECAL NOTES Older vacuum tube models will take the same heads listed. NOTES:. record and play heads are same type. 2. Playonly and stereo machines have dummy head in left position. 700RPD, X700RPD Dummy Head2 (used on play and on Stereo units) Delay TE LEX/MAGN ECORD MCP3 PA2H47KR64 Rec/EraseProg. & Cue 3. Either R (short PB2H7KR6 PlayProgram & Cue l 2056 stud) or R6 (long stud) rear mount heads will fit 700 series. 4. Only R6 (long stud) heads will fit X700 series and precision head bracket PlayProgram & Cue No 200D Dummy Head 7605D 200D 7605D Stereo PlayProgram & Cue Dummy Head No 570D 570D 7605D 760 MCPR3 r MCPS RecordProgram & Cue No 2003D PlayProgram & Cue 200D 2003D 2000 MCPRS3 Stereo RecordProgram & Cue PlayProgram & Cue No 5703D 5703D 570D 570D

14 NOTE: "D' indiwtes long life Duracore Heads Track Ref. Master Play Slave Record Model No. Style Notes Haad 8 OK Head & OK Erase Head AMPFX PD0 PD0 PD TS RR 9292D D+87 4TS RR FTM RR TM R.R ZTS/M RR 9206/9206D / FTM RR 909/9209D+76 93/93D+76 4TS RR CH 8T ZT CASS D Dt.76 4T CASS D FTM RR :i:;B i:,",".: ~ ~ AV.32C BE900 8T R.R SL 580 (4 BE90 8T RR SL BE000 8T R.R MAS BE00 8T RR MAS BE2900 4CH CASS SL 54 /54D BE3000 Modal No. Track Style NFONCS (Continued) Ref. Notes Master Play Head & OK 24 2T C SL 5220D 254 4T C SL 547D 272 2T R SL 924D 274 4T R SL T 4" R MAS D 294 4T 4" R MAS ZT CAS SL T C SL 547D ALPHA 2 ALPHA 22 ~~ ALPHA 4 ALPHA 44 Slave Record Head & OK D 2T C.C D T C SL D P T 4" BMCT P2000 4T 2" EMCT D P T 4" BMCT ) 545D Erase Head 9 8 (Mon 98 (Mon 98 (Mon CopyCars Z4T CC 543D D L GARNER 056 FTM RR D 056 2T 4" RR D D GRNDLEY (TAD) R.07 2T 4" RM.C D D R07 4T 4" R MC D R.07 FTM 4" RR D D R07 2T 4" RR D D NFONCS cc.2 cc4 CS2 cs.4 D.8 RC2 RC.4 RCC.2 RR.2 RR4 RS2 RS4 74M 2T CC D D 4T C.C 2T CAS SL RCC4 ]4T 4"RCC D D 4T CAS SL 8T 4" RR T 4" R.C D D 4T 4" RC D 2T 4,, RC.C D D ~t:~,543d 2T 4" R.R T 4" RR T 4" R SL 825 4T 4" R SL 5654 FT 4" R.R J J MAGNECORD (TELEX) 000DDMT 2TR.R 9292D 2004 lo00ddst 4TS RR 860 MAGNEFAX Tuber Tuber Solid State Solid State Solhd State Solid State Solid State 5454 D PENTAGON cl 5454D RR FT 4" R.R T 4" RR T 4" R.R FT R.R D D 2T 4" R.R D 4T 4" RR T C.C 4T CC 8T 4" MAS 42 8T 4" SL 42 2T C.C 4T CC 2T C.C 2TC.C 4T CC 2T CC 4T CC 4T C.C 2T 4" RC TubeTvDer FT R.R D D MCA 52 2T CC D c.00 c20 C40 C320 C340 C.400 c D 543D 5847/ D D D D ) D 520 D 54 D ' D 54D 520 D D D 54D D

15 N ort ro n i cs Tape Head Rep ace men ts for : Duplicator s/c o pi er s Model No. Track Ref. Master Play Slave Record Style Notes Head & QK Head & QK Erase Head Model No Track Ref Master Play Slave Record Style Notes Head & OK Head & OK Erase Head C.320 ZT 4" RCC 4T 4" RRCC C.400 4T 4" RC C T /2" RC cc.20 2T CC CC40 4T C.C CM2000 2T C MAS CM4000 4T C MAS CS.420 2T C SL cs. 40 4TCSL RC20 ZT /4" R.C RCC.20 2T 4" RC.C RM.40 4T 4" R.MAS RM.200 2T 4" R MAS 522) 520 D 543D 54D ) D D D 5454D 520 D 54 D ~~Z~9206D D D 522D D D 224 FTRR 909!$09D D 225 2T4 RR D D 225 4T r4 R R T C C 5205'5205D D T C.C D zs.200 2T C.C ~520 D CS203 2T C.C D 520/520 D CS403 4T CC D cs T C.C D CS.20 2T CC D 520'520D cs4000 4T C.C D 54!54D DUP 4T CC D 54 '54D DUP 2T C.C D 5220!5220D GT 2A 2T 84'' RM D+38 GT 2AS 2T /4" R SL 9204 '9204D+38 GT 4A 4T lj4" RM GT 4AS 4T {4'' R SL SUPER PRO 30 2T CC 5205r5205D D SUPER PRO 30 4T CC 543' ' RME.240 RME.280 RMT42 RS.20 RS.40 RS.2 RS220 RS.2400 RS.240 RS.280 RS.288 S40 s.000 S.400 SCC.2 l i SRCC.42 4T 4" R MAS 8T 4'' R MAS 8T " R MAS 4T 4" R MAS ZT 4" R SL 4T 4" R SL ZT 5" R SL 2T.5" R SL 4T.5" R SL 4T.5" R SL ZT.5" R SL ZT.5" R SL 2T 4" R SL 4T 4" R SL 4T 4" R SL 8T4"RSL 8T 4" R SL 4T.5" R SL 4T /4" R SL 4T C SL ZT C SL 4T C SL ZT CC 4T 4" RCC 24 FT R.R 25 2T 4" RR 920/9206D D D D D D D D D D D D D D 5454 D D D i) D D D D D D >OPER 2T CMC D :OPER / 2T C SL >OPER V 4T CMC D >OPER V 4T C SL 5443 CON. COP ZT CMC D WOLLENSAK.3M 520 AV 27 AV 2760 AV 2270 AV 2780 AV 6030 AV 2T l(4" RMC !9206D 520r520 D 523 4T 4" RMC D 523 2T CMC 4T CMX 5205!5205D D D 5454D 523 2T 4" RMR 9206/9206D 9203!9203D FT /4" RMR 909!909D D 4TS 4" RM.R CH 4" RM.R T /4" RM.R 92!92D 9203/9303D FT 4" RM.R 9090D 903/903D 2T C.C /520D 2TM RR RPE.22 2T CAS MAS T C SL 2T C MAS D 2T C SL 2T l(4" R MAS 9206/9206D 520 '520D D 3

16 Nortronics Tape Head Specialized Audio Re place men s for: This section covers those unique applications such as aircraft recorders, reverberation units, telephone answering systems, etc. Listi ing is by manufa cturer's machine model number. See also Section E. Model No. Track Ref. RPor 4th Head Record Playback Style Not RPE or Combo Head&OK Head&OK Erase Head&OK Model No, Track Style Notes Ref. RPor 4th Head Record Playback Erare RPE or Combo Head & OK Head & OK Heed & OK Up to mil After mil c. 4CH 4" CART / aaa4~ aaa4~ FARCHLD (Cockpit Recorder) AW 4CH 4"CART aa4R Baa4L 6.P.X 2TM lpici CAM CAM Flt. Rec 4CH 8TR 7609 AV CH 8 TR

17 AMPEX Head & QK t t t t AMPEX (Continuedl t AMPRO (NSTATAPE) t ATC (GATES) (HARRS) 2000 Pro Cue AUTOMATC ELECTRC (ELECTRONC SECRETARY) WW WW WW WW WW WW WW WW G HY5L8B WW BROADCAST ELECTRONCS (See SPOTMASTER) BRUSH (CLEVTE) BK t35 BK BK.072E BKl072R 9203t35 EK BK BK0' 835 BK BK BK CODEAPHONE (FORD) LO LO302 L0303 LO CODEAPHONE (Cont'd.) L LO L L LO LO COLLNS ~ CONCERTONE (Cont'd.) t t ( (2 20 O+l , P.8 HC4K RECORD PLAY 9+66 CONCERTONE CROWN NTERNATONAL a5q3k a4r a tb BT BTZB BT BT BT BT BT ND5 202 ND ND53 THP THP R R lR ~ T t , ( (.l tl

18 ~ ~~~ ~ ~~ ~~ Cross Reference Recorder Manufacturer and/or Head Manufacturer's Part Number to Nortronics Replacement Head & QuikKit CROWN NTERNATONAL (Continued) Head & OK HARRS (GATES) (ATC) Continued 3M (See WOLLENSAK) RCA (Continued) MOVOLAMAGNASYNC ~ l t C * PENTAGON NFON CS mni win A t ' t D 6808' ' D 682' ' ' D t t CH D RECORDEX X.. 5x D D DCTAPHONE (See METROTECH) ZJZL44R ECHOPLEX (MARKET) AlHC44R.R 683 AlHC47RR 679 G HYZKR D D D NSTATAPE (See AMPRO) D D D REVOX NTERNATONAL TAPE TRONCS (TC) RCA D D D D t20 RPE tl ELECTRONC SECRETARY (Sea AUTOMATC ELECTRC) FARCHLD FENDER (ECHOFONC) 3.A HC47R GMH3L FORD NDUSTRES (See CODEAPHONE) GABLES ClHY7K.RS.2S 7466 PGZ(7K.R.lZS 7658 HARRS (GATES) (ATC) *Obsolete "0" S Duracore ~ D '54 OD ,54 D r9206D D /5220D ' C ,6, C87 SCULLY/METROTECH (DCTAPHONE) c i Rnnm C LC4K _....~ LOCKHEED Y ~ MAGNASYNC (See MOVOLA) MAGNECORD (See TELEX) METROTECH (SCULLY) P.AZH48R 604 P.A2048K 6007 P.6 2Q 7 F 860 PRBlF7K 99 PRBlF8R 903 PRB2H7K 923 SMEF4N MCRO MAGNETCS C t

19 ~~ ~ Cross Reference Recorder Manufacturer and/or Head Manufacturer's Part Number to Nortronics Replacement Head 84 QuikKit SCULLY/METROTECH SCULLY/METROTECH STANC LHOFFMAN TEAC (Continued) (Cont'd) Head & QK (Continued) (Continued) PR.BZG2K t t ROO & SUNDSTRAND A (UNTED CONTROL) A ~000~ A A mfiwom ~~ MEF22MZ L C TAPECASTER OA BlHC7KRG G H2K.R P.A2H47K.R f9 PB2H7KR PB3Cl7KR PG H7KR SPARTA (CETEC) Dummy R Dummy. N TAPEATHON L U SPOTMASTE R (BROADCAST ELECTRONCS) DliDZ DA ~ DOlA DOlAX t DOME DMlA DM2TA ~~~~ ~ DMlB ~ ~ 205 ~~~ DMlBX DM2RB 2053 TEAC DMZRBX DMlC A DMZRC MP MR t t XL "L" and "D" are Duracore DLZD LMP 200 D LMR 2003D THE THE THP THR DM3RB TELEX (MAGNECORD) DlSA t66 (VKNG) DM3RC SP 570 H85F SR 5703 H85F LSP 570D H LSR 5703D ~85.~ PK 325 H85RCl2A D2MB 2 H85SZ t DLlA 677 H85S DLZB 653 H DL2A 205 H DLZC H F2A F5A S5B STANC LHOF FMAN t L B

20 Cross Reference Recorder Manufacturer and/or Head Manufacturer's Part Number to Nortronics Replacement Head 84 QuikKit TELEX (MAGNECORD) (VKNG) (Continued) Head & OK _ m _..~ L TELEX (MAGNECORD) (VKNG) (Continued) TELEX (MAGNECORD) (VKNG) (Continued) L t L TELEX (MAGNECORD) (VKNG) (Continued) t L m L L l L ~~ L L PG H8R L t L L CH3R m ~ L PA2H7RR L L L L PA2H7K R L L L L L L L ~ L t L t t PA07KR A2022KR A2044KR PA HCl7KR l C "L' is Duracore 8

21 Cross Reference Recorder Manufacturer and/or Head Manufacturer's Part Number to Nortronics Replacement Head & QuikKit TELEX (MAGNECORD) (VKNG) (Continued) Head & QK TELEX (MAGNECORD) (VKNG) (Continued) l qlro _ TELEX (MAGNECORD) (VKNG) (Continued) _ PR.82H4N A TELEXTMAGNECORD) (VKNG) (Continued) D D D D D t A2Hl7K.R PA2047K.R PA2Q44K.R ~ TELEX (VKNG) (MAGNECORD) A A36B A36B7 92 A36C A9D PA2H7KR A9D A9 D A9D A9 D A9D A9D A9 D A9D AN AN EBB EFN EFN EFN L EFR40 44 EFR EH EH EH EHNll 3600 EHN EHN L EHR23 36 EM tl9 EM EM EMN EMN EMR253 4 E EO EQ EO EON ~ 2000+fifi zoo.._ EON EON EON L EON ESN L ESN ESN ESN ESR ESR ESR t FB FN FN A HC44RR t _.._ PA2042KR PA2042KR ~ fioo A A A FN 9 FN FR80 96 HE HE HE H H t66 HB HE HE HE HE H HE H HE HE HN HN HN "L" and "D" are Duracore heads. 9

22 ~~ ~~. ~~ ~~ Cross Reference Recorder Manufacturer and/or Head Manufacturer's Part Number to Nortronics Replacement Head 84 QuikKit TELEX (VKNG) (MAGNECORD) (Continued) Head & QK TELEX (VKNG) (MAGNECORD) (Cont'd) TELEX (VKNG) (MAGNECORD) (Cont'd) QB ~ SN HN QB SN HN Q SN HN QB SN HN QB SN HN Q Sy HN Q835 ZOO+% SN HN t66 SN HN Q SR2 20 HN a ~ m SR HN QN SR HN ~ SR HN QN SR HN QN A9A HN ~ A9 A HN QN ' HN QN C HN ON C HN HN352..~ 370. HN HN HN HN HN HR22 32 HR HR2 305 HR HR HR M22 2 MB MB M MN5 20 MN MN6O 000 MRlZ2 25 QB ~ ~ ( ( QN QN QN ~ ~ ON QN ~ QN QN OR27 2 QR3 25 QR SB SB SB SB SN SN SN SN SN SN SN SN SN SN WOLLENSAK 3M) RPE RPE RPE RPE ZOO RPE RPE20 36C C C RPE2 36C RPE2 36C RPE22 36C C C C RPE22 36C ~ ~ 75G5B 40t Q D D W2ER ~ a m VKNG (See TELEX) WlR25G D D Professional recording equipment users need magnetic heads with greatlyextended wear life to directly reduce operational costs by eliminating electronic adjustments, requiring fewer service calls and cutting recorder downtime. Nortronics now offers a new series of direct replacement magnetic heads constructed with a newwearresistant material called DURACORE. t provides ten times the operational lifespan of conventional Mumetal replacements to yield meaningful cost advantages. More than three years of extensive testing have proved DURACORE to be the ideal material for longlife replacement heads. You'll find that DURACORE heads provide excellent wear resistance and they're also affordable. DURACORE replacements are currently available for popular professional reeltoreel and cartridge recorders/payers manufactured by many wellknown companies 20

23 Nortronics Magnetic Head Specifications These specifications cover the complete line of NORTRONCS replacement heads, listed in numerical order by their RCD (Recorder Care Division) Model No. ncluded are heads for use on the,inch cassette tape, /4inch, l/pinch, inch, and 2inch tapes. Replacement heads for specific recorders. Write to Nortronics for a FREE dealer listing. f \ a E DURACORE Nortronics pioneered this longwearing core material which gives up to ten times the life of conventional permalloy. Heads available in DURACORE are indicated by the letter "D" after the Model No. RECORD/PLAY PLAY BACK RECORD MAGNETC HEADS /4NCH TAPE NORTRONCS magnetic heads have been tested and proven during over twenty years of manufacturing experience. Features pioneered by NORTRONCS n. clude deposited quartz gaps. hyperbolic face contour, and the Bsize case which has become standard in the industry. The widest variety and most complete line of magnetic heads in the world is offered by NOR TRON CS. PREMUM 4track Stereo Heads Bsize case, laminated cores, deposited gaps. hyperbolic feces.,043inch l,lmm tracks (2),36.inch (3.45mml centertocenter track spaclng. PREMUM 2track Stereo Heads Bsize case, laminated cores. depnsited gaps, hyperbolic faces.,080inch 2.0mml tracks (2,60inch (4.0mml centertocenter track spacing. STANDARD 2.track Heads G4ze case, laminated cores, deposited gaps, hvperbolic facer..oo.inch 2.0mm) single track. Located,020inch f0.5mm) below center on head face. PREMUM 2.trrok Heads G.Size case, iaminatad cores. deposited gaps, hyperbolic faces..08ohch 2.0mm) single track. Located,080 f2.0mml off center on head face. (Full offset. so head may be v) u g i E P K 'i 00 zz 6 5.' 5 :" " ji j D D D D '62Cl2K '.Bz~~K '.Bz~~K '62a4~,ee #864 'B2Cl7R ~.BZ~SK 'W2Cl8R,BZ~~F.P.B2(7F '.6208F '62H2K '8ZH7K.PBZH7K '62H4K.PE2H4K 'B2H4R.PB2H4R '.BZHllR '62H7R 'BZH6K.P.B2H6K.B2HBR.PBZHBR BZH7F B2H47K )ual mp. 82H7K.R6' ilhy2k ilhy5l.glhzk GlH7K GlH4K G H4R GlH7R.24R8L5.R* (L42RlL364.42R8LR' 90E3U4.R. 70R4L4.R' 70R5L66.42R5K55B ? PS unequalired RP relponre using 3M76 tape NRZ digital writelread pk.biased at khz, 2 db data, 7.5 PS, below tape saturation. 200 BP [

24 ~.., ~ Magnetic Head Specifications RECORD/PLAY PLAY BACK RECORD CASSETTE HEADS,NCH (3.8mml TAPE [All 'W"usn Cawttn heads have "A"mount bracket unless otherwise indicated.) NORTRONCS cassette heads have finelaminated cores, deposit. edquartz gaps and hyperbolic face contour. 'W" case s m end "A" removable mounting bracket are standard for convenience in interchangeability CASSETTE 2.mck Heads,057inch (.45mm) single track. Located,046.in. l.7.mm) below center of head face. CASSETTE PREMUM Full Trick S ng e,30' 3.3mmr Traw CASSETTE PREMUM Full Track S ngia,70" 4.3mm) TracK CASSETTE RAW head. Dual Gap,057'' (.45mml Single Track CASSETTE STANDARD 2track lchannel Heads.,057inch.45mm) Track Width.,092inch 2.34mm) CentertoCanter Track Spacing. CASSETTE PREMUM 2track Zchennal Heads. 2 mil core laminations for meximum efficiency at high bias and audio frequencies,,057inch.45mm) Track Width,092inch (2.34mml CentertoCenter Track Spacing. CASSETTE 4track Storm Hnad.024inch l0.6lmml Tracks 2),035inch 0.9mml C.C Spacing CASSETTE Rud.Aher.Write Heads Twochannel Dual9ap heads for digital writahead or audio record and monitor inch l.45mm) Write Track (2) 0.36inch (0.9mm) Read Track (2) 0.92inch (2.34mml CC Track Spacing CASSETTE 4.CHANNEL HEADS Capable of recording and playing ali four channels of the standard cassette stereo format. Heads have allmetal faces, precise track alignment, and unusually low crosstalk,02inch (0.53mml Track Width (4) 5mil laminations (Std. P & LP types) 2mil laminetions Prem. P2 & LP2 types for lower losses at very high bias frequencies D D D D D D A 43W DC2P060KZ.A 39w c,.,. LPW2PllN.A n ",.," W DC22P060K2A W DC22P084KF2A LPW4J4FA 54 54D W LPYV4JBNA PW4JllN.A 543D LP.W4JBFA 544D 5W LPZW4JllNGlNO 545D ,. 547) 5w LPZW4JllN.A. H d. * t $ 6 uin db E _ 40 & _ '00 z r C 200 _ 200 _ _ PS unequaiized RP Rerp With TP8 tape pkbiased a t khz.tzd8 belowtspelaturation. 5 ips dupl. data With 0 kh2 bias, 8 & 80 khz l l ma U UA mu db PP ma NRZ digital writelread data, 7 5 PS. 200 BP P P mu BP rn * _ _ RECORD/PLAY PLAYBACK RECORD MAGNETC HEADS /4.lNCH TAPE s g 7 5 PS uneouallzed R/P NRZ dldtai reip~n~ pkbiased urinijm76 at khz. 2 tape d0 7 below tape saturation. data, writer;ad 7.5 PS, 200 BP NDRTRDNCS magnetic heads have been tested and proven during over twnty years of manufacturingexperience. Features pioneered by NORTRONCS include deposited quartz gaps, hyperbolic face contour, and the 0size case which has become stendard in the industry. The widest veriety and most complete line of magnetic heads in the world is offered by NOR TRONCS. 4.Track 4Channel Heads for 4inch tap. PREMiUM P80Q models have superior crosstalk rejection. as do the 840 models. ma:,037inch.95mm) Track Width,07inch (.8mml CC Track Spacing Ma:,042inch l.07.mm) Track Width,067inch.7mm) CC Track Spacing PREMUM 3Channel Heads for 44nch tape. Hvperbolic metalfew record and play heads with three channels. Popularly used on the NAB.type stereo cartriage tape machines.,043inch l,lmm) Track Width 3.lOOinch l2.54mm) CC Track Spacing :ED t & 56t 562t!:iiD $i:d 5630 ;;;id ' 'lb [ [ [

25 Magnetic Head Specifications RECORD/PLAY MAGNETC HEADS $ PLAYBACK 4.NCH TAPE RECORD $ $8 (Continued) >Kf $!a a dl e $.PJ PS 9b ULC &TRACK STEREO Heads for ll4inch Tape. Standard Models: 0.8inch (.46mml Track Width ( oncn 3 23.mmr C.C TracA Spac ng PREMUM %TRACK Stereo heads with fine laminations for improved H.F. prformmce.,02inch (.53mml Track Width (2,27inch (3.23.mml CCTrack Spacing 4CHANNEL 8TRACK Hudr for 4.inch tape. Two staggered heads may be used to generate all 8 tracks on the tape.,02nch (0.53mml Track Width (4,0635inch (.62mml C.C Track Spacing 35B L.82L7K BZL7K RP BX lh89909 P P42L4R 0 4 r 3.75 g response PS unequslized RP using 3M75? we Dk.bned t khz. 2 db below tam saturation NRZ digital writelread data. 7.5 PS, 200 BP PREMUM 4CHANNELSTRACK Headsfor 4inch tade. Two heads may be used for ail 8 tracks. ncorporate better intarchannel shielding for improved crosstalk rejection in duplicator addlications.,02inch 0.53mm) Track Width (4,0635.inch (.62mml C.C Track Spacing coa) 6RR "COMBO" HEADS + ERAS.RECORD/PLAY ERASE "Combo" heads consist of an erase head pius a recordiplayback or recordonly head installed into one head care. "2.Combo" heeds differ in that erase and RP sections share a common pole structure. per. mitting the erase and RP gaps to be spaced only 030 inches apart. The extendedpole version 2Combo heads work particularly wall against hard magnetic oxide surfaces such as ale and RP heads. For example. the :iz; 258 ipalhc44r 2.Track Combo Head AlHC47K86 080mch (2 Omm)TrackWidth(l)CenteredTrack 679t AHC47RR' AlHC5L2 ERP RlRRt 75R filr? AlHPdAR.R* FR,057.inch (.45mml Track Width ( 2Channel Carrene 2Combo E.RP inch (.45mml Track Width ll Ext..tip 2Combo Super.8 Film 0.02.inch (.53mml Track Width ( Fcare 2Combo. inch Video,035inch (.34.mml Track Width ( Ext.tip 2Combo ERP,02.inch.53mml Track Width ( BTreck Stereo ZCombo 0.02inch (.53mml Track Width (2 XZWLC47K ERP 6303 H80049VCZ ERP X2.RLC96K2 ERP ZJZL47K2 ERP Selfbiased from erase section;.875 PS. TP 8Tape. 'Seifhased from erase section; 3.75 PS. 3M.76 Tape. 23

26 Magnetic Head Specifications 5 c c D mh a b 4 8 ", ( 0 ZK $ response 7 5 PS unequalized RP ur~ng 3M76 tape pk blared at khz 2 d0 7 below tam ~at~raflon. NRZ digital writelread data. 7.5 PS. 200 BP PP P P d0 ma V ua mv db ma mv 0P Erase Head Section for specifications 24

27 ~~ Magnetic Head Specifications PROFESSONAL HEADS (Continued) WSDOnSe Yln9 3M206 tape okbiased at khz. 2 db NRZ digital wrirelread data. 7 5 PS. 200 BP _ "PRO" Series 2Track Stereo Format.082!nch 2.mml Track Width,56nch 3.95.mml Track Spacing PRO Series piay heads have low frequency response down to 25 Hz at 5 PS tape speed W STUDO HEADS RECORD, PLAYBACK, AND RECORD/PLAY P.MCH. NCH 2NCH TAPE P.Oles.0a 08, leaor A in m,perdo c A. ~ ~ Facer t a Deoor :cc Clau Gaps ano La ^. ate0 Cores For oeiai eo o Fens 0 ano mon ng nformat OP. req.esl 'rm hortrohlcs 0',or Deaer or, Form a9223 Ada o Cata og * /2msh Tap. 3Channel Format 00 ncn 2 54mml Trac< h atn,85 nci 4.72mm CentertoCenter Track Spacing 2inch Tape, 4Channel Format,070inch (.78mm) Track Width,30.inch (3.30mml Centerto.Center Track Spacing 4nch Tape, 8Channel Track Format,070inch.78.mm) Track Width,30inch (3.30mm) CentermCenter Track Spacing 2.inch Tape, 6Channel Track Format,070inch (.78mm) Track Width,27inch l3.24mm) CentertoCenter Track Spacing.inch Tape. 2.Channel Track Format 038. ncn.97.mml Tracr h otn 084 nch 2.4.mmi Center.toCenter Tracr Spac ng 2.mh Tape. 24Channel Track Format,038. ncn l97.mmi Tiam W atn 084. ncn 2 4.mml Center.to.Center Trac* Soacing 24nch Tape, 6Channel Track Format.070inch (.78mm) Track Width.274nch (3.24mml CantevtoCenter Track Spacing a C Y) Ud k# PO STP.3S9El3 STR.3SSEl2 STP488E3 STR4EN7.E23 STP.488F53 STR.4EN7.F64 ' STP483 F93 STP.4832.El00 STP4846N 48 STP.888E33 STR8BN7ESD STR8EN34El2 Play Record Record Record Play Record Record STP8E5.Gl24 Play RiPE STRP8ENN STP6EN60.Nl44 STP.2UN2E30 STR ZUN20E24 : j Ohms e c Ohms W _. _ RPE See date for 9995 am Se Average 5 DS Constant Current RP charac eriltic "ring 3M206 tape peak blared at khz and recorded at 2 db below taw saturation. 25

28 92 OL C '0 C99b N9NE93S Ll C'l CBlb 92lD.98NE93S 666 OL & LL'O Ciibb 5239N893S OL C l 2' CWlP l~ld.95n~bz3s L '0 W9 SElN89Nn'oZ3S dVl H3N.Z an,v H3N.L H3NZlL SQV3H 3SVU3 oianis : $2 0 L e SlV,l33dS anv 33ssv3 '3dVl H3NWL

29 Head Outlines NOTE: DMENSONS ARE SHOWN N NCHES OVER MLLMETERS. 062 E S N 09 p$.57, W S N B 200/PB2Q 2B 8600/WPB2Q 3G 7608/PG2Q 4B 76O/PBlQY 5B 6000/PA2Q 6B 6026/AlQC w.062j NSN.57 7SE 400/SSEQ 5 ffi22 NSN? 57 [ m+f 8LE 400L/LSEQ 9B 870/B2EQ 0B 8640/PRB2EQ,00 TRACK SPACNG *j& CENTER TO CENTER 39 +f&?t 037 ETW E T W B 5700/PB3Q S N /BQQ 3B 5630/B4Q + 4 B 880 /PCB4EQ /BlHC 040 +F+o S N e OF CASE 6B 840/PBlHY /WPBlHY 8G 3200/PGlH B 2000/PB2H 2 B 8200/WPB2H 22B 9200/PRB2H 23C 725/PC2H 24B 600/PA2H 25B 6 26/PA HC SE 3600/SMEH, SE 2200/SSEH 28LE 2200L/LSEH NSN B 830/B2EH, /PRB2EH gq 34SE 4400/SMEF 3B 902/PRBl F COL TO UPPER PNS 32B 925/PRBlEF /B2L TKZ7 rtkl NSN 33B 80/BlEF 6 S N / +\ TK4J itk3 36B 5830/BQL P BQL OLS PCBQL FTW ETW 2 R P GAP4lERASE GAP R P GAP4lERASE GAP 37W 530/W R 38W 5230A 39W 5200/W2P 40W 6200/ZW R L W 620 /ZW2R K

30 Head Outlines NOTE: DMENSONS ARE SHOWN N NCHES OVER MLLMETERS. "A" MOUNT STYLE 80 42W 5260/DC22P 43W DCl2P /W2ER 45W 5/DC F/K 46L 49lL24R R 47L 4952/L42RB m ERASE TK. SNS R/P TRACK,028, L DA. PN ( W 6302/XZ W LC 49M 4954/M70R R M 4955/M70R 5 W 5400/P W4J B "B' SZE DMENSONS 53C "C" SZE DMENSONS t ; 54G "G" SZE DMENSONS, JJ.66 p D.40 l A LE "LE" ERASE DMENSONS 56SE "SE" ERASE DMENSONS 57RX 772/REX0 TYPCAL REAR MOUNT HEX NUT7 :LAT [ LOCK WASHER WASHER 2 ERNGRN YELBLU ELKRED 2 ERN~RG 3 GRNYEL 4 WHTBLU B2Q/B2 H/S E H ( Use #) 5600/5830 BOQ/BO L REDORG 2 YELBLU 3 WHTBLK REAR MOUNT LEADS COLOR CODE SNGLE 632 STUD (.200 inch back from from head face, spot welded to spring clip.) OK9 "SE" Erase Heads QK2 "G" Size R/P Heads OK66 All "6" Size Heads TWO 256 STUDS (On side of spring clip.) OK8 "SE" Erase Heads OK20 "G" Size R/P Heads OK38 All "6" Size Heads 58 REAR MOUNTS 59 BASE MOUNT QUKKTS 60 SDE MOUNT QUKKTS

31 Side Base BAS OSCLLATOR TRANSFORMERS BRACKETS QK74 Universal ing Bracket. A unique, generalpurpose as Cat. No. Dercrlption T70T2 T70T5 T70T6 T70 SERES for P.C. board mounting only For Xsistor circuits, 20 KHz & 40, 80 or 20 Volts RMS. For Xsistor circuits, 200 KHz. For Xsistor circuits, 2300 KHz Volts RMS. T60 SERES for chassis mounting only Cat. No. Dercrlptlon T60TZ For Xsistor circuits, 600 KHz B 40, 80 or 20 Volts RMS. T60T6 For Xsistor circuits KHz & 70 Volts RMS. T60E For Vacuum Tube circuits, 4070 KHz 8 7 or 20 Volts RMS. T60F For Vacuum Tube circuits, 6000 KHz 8 60 or Volts RMS. QK75 QK77 QK78 sembly featuring alignment for head, faceand azimuth. Two TG7 guide posts may be added if desired, or tabs for guide posts may be snappedoff for limited space applications. Base features holes for mounting on recorder. For all Nortronics No Record, Play, Record/Play and Combo heads except Series and miniature heads. Also fits special "6"Case Erase heads. Basesize with tabs: /6"W x 27/32"L. Base size without tabs: h6"w x 7/32"L. dentical to QK74, but two TG7 guide posts are included. dentical to QK74, but for NoMt. heads in Series. dentical to QK74, but for No erase heads. Does not fit special "B" Case or "L" Case heads. QK76 ing hardware to convert many AMPEX nests to Nortronics heads. ncludes mounting block with hardware and plug. OTHER QUKKT MOUNTS AVALABLE QK8 Std. Erase Side QK88 Magnecord 728 QK OK9 Std. Erase Base QK89 Scully Adaptor QK OK20 "G" Case ~ OK90 Scully Adaptor QK "B"Cart. OK2 "G" Case ~ QK9 Scully QK OK35 "B" Case Sp.Base QK92 Ampex 600 QK6 Roberts QK38 "6" Case Side OK93 Otari OK OK66 "6" Case Base OK94 Pioneer RT70 OK9 Sony 300 R/P QK73 Electro Sound OK95 Pioneer 2022 OK300 Pentron QK79 Ampex AG440 QK0 Bell & Howell QK304 Concertone Erase OK82 Tandberg OK02 "6" DualStud Base OK305 Sony Erase OK84 Concertone OK05 Bell & Howell OK306 Sony Erase Lge. QK85 Teac OK 06 Concertone "6" QK70 Pioneer RT70 OK86 Ampex 900/600 OK Oscillator OK87 Ampex PR0 OK CH3N/B CH3R WCH3A CONTACTOR HEAD for endoftape sensing/ track switching Contactor head, no mount head including base mount adapter Contactor head, Rear/ Contactor head, cassette TAPE GUDE PLATE TG8 Stainless Steel for use with sidemount heads when space prohibits use of a TG7 guide post or when replacing sidemount heads with a builtin tape guide. Can be used with L5 or L6 brackets. Slotted holes provide variable adjustment. Size: 2/32" H x 25/32"W. TAPE GUDE POST TG7 Precision guide for positioning and controlling tape path travel. Special chromeplated brass finish for longest life, minimum wear. Supplied with a variety of mounting hardware. PLUG AND CABLE ASSEMBLES ORANGE CC70 f i4t"o;pk (CC77 WRNG) WHTE BLACK 6, " Plug and shielded insulated cable assembly for new model Nortronics heads (except Combo and Cassette heads). CC77 8" Plug and shielded nsulated cable assembly for Nortronics Combo and Cassette heads (except 5400 Series). CC0 4" Plug and unshielded cable assembly for heads. CC 4" Plug and unshielded cable assembly for Stereo heads. r TC..54 Goldplated beryllium copper (supplied in pkgs. of 00.) For heads with.0" pins. TC9 Goldplated beryllium copper (supplied in pkgs. of 00.) For heads with.030" pins. PN CLPS AND CABLE ASSEMBLES CC55 9" Terminal Clip and shielded cable assembly (redorange) 2 per pkg. (for,0'' pins only) NNlD PRESSURE PAD STRPS PP5 Pressure Pad Strips, 5/Pkg. PP Pressure Pad Strips, Pkg. CC78 24" Terminal Clip and shielded cable assembly (redorange) 2 per pkg. (for,0'' pins only) CC56 As above.coded (yellowblue) CC79 As above coded (yellowblue) CC57 As above coded (whiteblack) CC80 As above coded (whiteblack) CC58 As above coded (redblack) CC8 As above coded (redblack) 29

PRODUCT GUIDE LANDSCAPE LIGHTING

PRODUCT GUIDE LANDSCAPE LIGHTING PRODUCT GUIDE LANDSCAPE LIGHTING North America fxl.com FINISHES Metals AB Antique Bronze on Powder coat Standard AB Antique Bronze on Brass AT Antique Tumbled on AT Antique Tumbled on Brass CU BS Natural

More information

PRODUCT GUIDE LANDSCAPE LIGHTING. fxl.com. A Hunter Industries Company

PRODUCT GUIDE LANDSCAPE LIGHTING. fxl.com. A Hunter Industries Company PRODUCT GUIDE LANDSCAPE LIGHTING A Hunter Industries Company fxl.com FINISHES Metals Powder coat Standard Powder coat Specialty s AB on copper AB on brass AT on copper AT on brass CU BS SS NP BZ DG WI

More information

SMB. Features. Mechanical Characteristics. Maximum Ta=25 unless otherwise specified. Peak Pulse Power Dissipation by10/1000μs Test Waveform

SMB. Features. Mechanical Characteristics. Maximum Ta=25 unless otherwise specified. Peak Pulse Power Dissipation by10/1000μs Test Waveform KLS5-SMBJ Features SMBJ Series *600W peak pulse capability at 0/000μs waveform *IEC 6000-4-2(ESD) 5Kv(air), 8kV(contact) *Quick response to surge voltage *Excellent clamping capability *Typical failure

More information

ISO 6020/2 industricylindre Industrial cylinders

ISO 6020/2 industricylindre Industrial cylinders According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,

More information

P1X Series. Compact Rodless Air Cylinders Contents

P1X Series. Compact Rodless Air Cylinders Contents Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...

More information

Guide blocks for ISO/VDMA cylinders

Guide blocks for ISO/VDMA cylinders Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection

More information

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552 Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder

More information

AIR CYLINDER Series A23, A24

AIR CYLINDER Series A23, A24 A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings

More information

HYDRO-PNEUMATICS. 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series ) Hydro-Pneumatic Intensifiers for Machining Centers... 1.

HYDRO-PNEUMATICS. 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series ) Hydro-Pneumatic Intensifiers for Machining Centers... 1. HYDRO-PNEUMATICS 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series... 1.310 2) Hydro-Pneumatic Intensifiers for Machining Centers... 1.330 HYDRAULIC CYLINDERS 1) LH7 Series... 2.110/1 Std. Mounting

More information

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE

More information

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple

More information

Tamil Nadu Public Service Commission

Tamil Nadu Public Service Commission ASSISTANT CONSERVATOR OF FORESTS DOE :02.12.2014 TO 09.12.2014 _ Subjcct:AGRICULTURE ~ Codc:ACFAG ~........ B X 41 AX 81 DX 121 o A 161 c l< 2 cy 42 CY' 82 Dy 122 13 x 162 B ~ J ox 4J c \ 83 D..( 123 c

More information

CROSS REFERENCE - MIFAB vs WADE

CROSS REFERENCE - MIFAB vs WADE CROSS REFERENCE - vs FLOOR DRAINS F-1000-C...1100-C-MR5 F-1100...1000 F-1100-C... 1000-C F-1100-C-DD... 1000-C-HD F-1100-DD...1000-HD F-1100-EF...1000-EF4 F-1100-C-EF...1000-C-EF4 F-1100-EG... 1000-EG8

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush

More information

djangoproject.com skillsapp.com for invite)

djangoproject.com skillsapp.com for invite) DATA DESIGN MEANING djangoproject.com skillsapp.com (tweet @skillsapp for invite) VISUALIZATION SRSLY, GUISE DATA? PROFIT MEANING! acquire parse filter mine represent refine interact acquire parse filter

More information

400W, 5V - 188V Surface Mount Transient Voltage Suppressor

400W, 5V - 188V Surface Mount Transient Voltage Suppressor 400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically

More information

colours for the facade

colours for the facade A widec range of colours for the facade profine GmbH KBE Fenstersysteme Motzener Str. 31-33 12277 Berlin Phone: +49 (0)30 86873-0 Fax: +49 (0)30 86873-386 Email: kbe@profine-group.com www.kbe-online.de

More information

Metric Hydraulic Cylinders Series HMI

Metric Hydraulic Cylinders Series HMI Series HMI Conforms to ISO 600/ (99) or working pressures up to 0 bar Vital Technologies for Motion and Control or Cylinder Division Plant Locations See Page II. 05 As the world leader in the design and

More information

Housing Styles. Square Aluminum Block

Housing Styles.   Square Aluminum Block Page 1 of 18 Housing Styles Square Aluminum Block AB General purpose temperature Accomodate a variety of elements Type A B Customize AB1 0.187" 0.75" AB2 0.250" 0.75" AB3 0.250" 1.25" AS Square Aluminum

More information

AIR CYLINDER Series A75, A76

AIR CYLINDER Series A75, A76 A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both

More information

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,

More information

MAC VALVES, INC. Rev. T

MAC VALVES, INC. Rev. T REVISION LEVEL DATE RELEASED CHANGE DESCRIPTION ECN NUMBER P.E. APPROVAL P.D APPROVAL A 5-11-95 ENGINEERING RELEASE 12727 EPJ B 1-15-96 ADDED 35 SERIES 13228 EPJ ADDED MOD 2938 TO 6500 SERIES, MODS 2910

More information

TM ETRS-TM35FIN-ETRS89 WTG

TM ETRS-TM35FIN-ETRS89 WTG Noise calculation model: ISO 9613-2 General Wind speed: 8,0 m/s Ground attenuation: General, Ground factor: 0,4 Meteorological coefficient, C0: 0,0 db Type of demand in calculation: 1: WTG noise is compared

More information

ISC CATALOG LEGEND Price update: November 2013

ISC CATALOG LEGEND Price update: November 2013 0012-0267 6 36 0012-7011 6 36 004T008 3 32 5.8 006T010 3 32 5.8 008T012 3 32 5.8 010-1401 7 27 153.94 010-1402 7 27 133.59 010-1483 7 27 133.59 010-1894 7 27 205.63 010-2054 7 27 153.99 010T014 3 32 6.1

More information

Features. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard)

Features. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard) Features Symbol Standard tie rod type hydraulic cylinder Double acting hydraulic cylinder for 70 kgf/cm 2 or 140kgf/cm 2 with bore sizes from 40 to 250. High performance cushion to reduce shock Double

More information

S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable

S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion

More information

LIST OF F I NAL DRAWINGS E. No. 3889 No. CONTENTS 1. INSTRUCTION MANUAL MAIN FOR ENGINE l). VOLLJME I, OPERAT I ON 2). VOLUME II, MA I NTENANCE 3). VOLUME EI, COMPONENTS DESCRIPIIONS (CODE BOOK) LIST OF

More information

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»

More information

2. COMPACT CYLINDERS series STRONG (RS, RQ)

2. COMPACT CYLINDERS series STRONG (RS, RQ) 2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic

More information

Item Code Description Quantity 3NA LV HRC FUSE LINK S00 80A 690AC 250DC 30 3NA3832 LV HRC FUSE LINK GL/GG S00 125A 500VAC 250VDC 0

Item Code Description Quantity 3NA LV HRC FUSE LINK S00 80A 690AC 250DC 30 3NA3832 LV HRC FUSE LINK GL/GG S00 125A 500VAC 250VDC 0 Controlgear Products +27 () 11 97 116 sales@controlgear.co.za Siemens stock items on hand as at Mon, 3/4/218, 14:4 GMT+2 3NA3824-6 LV HRC FUSE LINK S 8A 69AC 25DC 3 3NA3832 LV HRC FUSE LINK GL/GG S 125A

More information

HEWLETT PACKARD INK Cartridge

HEWLETT PACKARD INK Cartridge Item No. HEWLETT PACKARD INK Cartridge Compatibility Colour Price 51625A DJ200 / 300 / 400 / 500 Series Colour 1,130 51626A DJ500Q / 400 Series / Apollo Black 1,065 51629A DJ 600 Series / 660 / 670 / 695

More information

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from

More information

MCC omponents Itasca Street Chatsworth

MCC omponents Itasca Street Chatsworth omponents 21201 Itasca Street Chatsworth!"# $%!"# SMBJ5.0 THRU SMBJ170CA Features For surface mount applications in order to optimize board space Low profile package Fast response time: typical less than

More information

SELECTION LIST REVISION This book contains the following models: Chevy/GMC Dodge Ford

SELECTION LIST REVISION This book contains the following models: Chevy/GMC Dodge Ford SELECTION LIST ---------- REVISION 0 ---------- This book contains the following models: 1973-2002 Chevy/GMC 1994-2002 Dodge 1980-2002 Ford Form #64135-120102 WESTERN PRODUCTS P.O. BOX 245038 MILWAUKEE,

More information

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of

More information

Transmission Mount Rebuilding

Transmission Mount Rebuilding (Group 4) Transmission 1933-1936 Transmission support pad. Lower. 1933-1935 All; 1936 Series 40. Sold outright! TM336...$10.75 ea. 1934-1936 Series 40. Tranmission support pa. Upper. Sold outright! TM346...$13.25

More information

Control Units Ex e Glass Fiber Reinforced Polyester

Control Units Ex e Glass Fiber Reinforced Polyester Features Assembly Glass fiber reinforced polyester (GRP) enclosures Suitable for operation in Zones 1, 2, 21 and 22 Certified Ex de, Ex ib and Ex tb Up to 4 operators per control unit, base-mounted contact

More information

M C C SMBJ5.0AHE3 THRU SMBJ440CAHE3. Features. Transient Voltage Suppressor 5.0 to 440 Volts 600 Watt

M C C SMBJ5.0AHE3 THRU SMBJ440CAHE3.  Features. Transient Voltage Suppressor 5.0 to 440 Volts 600 Watt omponents 20736 Marilla Street Chatsworth!"# $%!"# SMBJ.0AHE3 THRU SMBJ440CAHE3 Features For surface mount applicationsin order to optimize board space Lead Free Finish/Rohs Compliant (Note) ("P"Suffix

More information

Tie rods cylinders to ISO standard

Tie rods cylinders to ISO standard Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643

More information

Vacuum Automation 2.1. The future depends on good product choices

Vacuum Automation 2.1. The future depends on good product choices Vacuum Automation 2.1 The future depends on good product choices Combined pump and gripper 432 433 Combined pump and gripper Introduction...434 Small...436 Medium...438 Large...452 Accessories...455 434

More information

APPENDIX A Instruction Set. Op Code. T states Flags Main Effects. Instructions

APPENDIX A Instruction Set. Op Code. T states Flags Main Effects. Instructions APPENDIX A 8085 Instruction Set Instructions ACI byte CE 7 ALL A A + CY + byte ADC A 8F 4 ALL A A + A + CY ADC B 88 4 ALL A A + B + CY ADC C 89 4 ALL A A + C + CY ADC D 8A 4 ALL A A + D + CY ADC E 8B 4

More information

PARTS LIST CHAIN SAW G2000T

PARTS LIST CHAIN SAW G2000T 848C0593B0 (007) PARTS LIST CHAIN SAW G2000T NOTE : 1. Use genuine parts specified in the parts list for repair and/or replacement. 2. Does not warrant the machines, those which have been damaged by the

More information

Aluminium tube and profile

Aluminium tube and profile > Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,

More information

6YEAR CANNON 6K TRADE-IN SPECIAL - PROMO CODE 6K1701 BUY THIS SPECIAL PACKAGE & RECEIVE $1500 IN FREE ITOOLCO PRODUCT FOR YOUR TRADE IN

6YEAR CANNON 6K TRADE-IN SPECIAL - PROMO CODE 6K1701 BUY THIS SPECIAL PACKAGE & RECEIVE $1500 IN FREE ITOOLCO PRODUCT FOR YOUR TRADE IN CABLE PULLER UPGRADE TRADE-IN NOW THROUGH MARCH 31, 2017 CANNON 6K TRADE-IN SPECIAL - PROMO CODE 6K1701 6YEAR LIMITED WARRANTY Cannon 6K Package Includes: Regular Your Cannon 6K - C6K $4,994.00 $4,495.00

More information

HYDRAULIC HEAVY DUTY

HYDRAULIC HEAVY DUTY Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,

More information

i TOOL CO. FALL TRADE-IN SPECIAL PROMO CODE: Ti6K1601 BUY THIS SPECIAL PACKAGE & RECEIVE $750 IN FREE ITOOLCO PRODUCT FOR YOUR TRADE IN

i TOOL CO. FALL TRADE-IN SPECIAL PROMO CODE: Ti6K1601 BUY THIS SPECIAL PACKAGE & RECEIVE $750 IN FREE ITOOLCO PRODUCT FOR YOUR TRADE IN FALL TRADE-IN SPECIAL Extended through Dec. 31, 2016 PROMO CODE: Ti6K1601 6 Cannon 6K Package Includes: YEAR LIMITED WARRANTY Regular Your Cannon 6K - C6K $4,994.00 $4,495.00 Real Jacks (1 Pair) - RJ6K

More information

SCORPION VERDE ALL SEASON

SCORPION VERDE ALL SEASON 1 165/70 R13 79 T P4 CINTURA 2 P165/70 R13 78 T P400 3 P175/70 R13 82 T P400 4 P185/70 R13 85 T P400 5 P195/60 R14 85 H P400 6 175/65 R14 82 T P4 CINTURA 7 175/65 R14 82 T P400 8 175/65 R14C 90 T TL CHRONO

More information

7. Are you upgrading a complete engine from a TCM/ Bendix to a Slick system? If yes, purchase a complete Slick Ignition Upgrade Kit.

7. Are you upgrading a complete engine from a TCM/ Bendix to a Slick system? If yes, purchase a complete Slick Ignition Upgrade Kit. 1.1 PRODUCT APPLICATION INFORMATION WORKSEET The following information will aid you in selecting the correct magneto, upgrade kit, or ignition harness: 1. Engine Manufacturer 2. Engine Model Number 3.

More information

Cylinders Series 61 - Aluminium profile

Cylinders Series 61 - Aluminium profile CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to

More information

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40% CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,

More information

TRI FIVE. Index. Contents B. Battery Tray / Bumper Bracket Bumper Series. Convertible Parts. Parking Brace Door Hinge & Latch.

TRI FIVE. Index. Contents B. Battery Tray / Bumper Bracket Bumper Series. Convertible Parts. Parking Brace Door Hinge & Latch. Index Contents B Grille CLT20 Battery Tray / Bumper Bracket Bumper Series CLT01 CLT02 H C Headlamp Hood Hinge CLT21 CLT22 Convertible Parts CLT03 Hood CLT23 Cowl Panel CLT04 Hood Latch CLT24 D P Desk Filler

More information

AIR CYLINDER Series A12, A13

AIR CYLINDER Series A12, A13 A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long

More information

Effective Date: June Rev. 7/20/2017- Void After: June 2018

Effective Date: June Rev. 7/20/2017- Void After: June 2018 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

240SS Power Unit. Installation Manual. AMKUS, Inc. is an ISO 9001 registered company.

240SS Power Unit. Installation Manual. AMKUS, Inc. is an ISO 9001 registered company. 240SS Power Unit Installation Manual AMKUS, Inc. is an ISO 9001 registered company. 4735 AMKUS, Inc., 2700 Wisconsin Avenue, Downers Grove, IL 60515-4226 Website: www.amkus.com E-mail: experts@amkus.com

More information

BEARING OPTIONS. Optional G Plate. 3/8 Attaching Bolt. Straight Roller (01) 2 1 /8. Optional J Plate. Oilex (23) 3/8 Attaching Bolt 2-5/8 3-5/8 4

BEARING OPTIONS. Optional G Plate. 3/8 Attaching Bolt. Straight Roller (01) 2 1 /8. Optional J Plate. Oilex (23) 3/8 Attaching Bolt 2-5/8 3-5/8 4 71 Heavy duty forged steel for extended life in rugged applications. TYPICAL APPLICATIONS Production racks and fixtures Live skids and Box trucks Heavy Duty s Wheel Diameter Moldon Rubber on Cast Iron

More information

Combined pump and gripper Medium

Combined pump and gripper Medium VGS 3010 H D W Dimension and connection W D H Feed pressure Vacuum Exhaust/blow mm mm mm 1 Housing VGS3010 23 30 Ø6 mm, 3x G1/8", M5 2 COAX cartridge 2:1 No COAX cartridge 65 2:2 COAX cartridge 2-stage

More information

Card Edge GENERAL SPECIFICATIONS

Card Edge GENERAL SPECIFICATIONS Card Edge GENER SPECIFICTIONS INT MTERIS Plating U/CU File Number: CGE COE: 54453 ECCN: ER99 INTERNTION HRMONIZE COE: MECHNIC : : EECTRIC Operating WV: Current Rating: : ENVIRONMENT Operating Temperature:

More information

RM/57200/M, RT/57200/M

RM/57200/M, RT/57200/M Roundline Cylinders Magnetic Piston Double Acting Ø 8 to 63 mm Three different basic versions provide flexibility and wide range of application Magnetic piston as standard provides a wide range of control

More information

intact Motorcycle batteries

intact Motorcycle batteries intact Motorcycle batteries Bike-Power Classic Bike-Power Classic Bike-Power GEL Bike-Power HVT 00211S 51615S GEL12-4A-BS HVT-01 00214S 51616S GEL12-4L-B HVT-02 00411S 51617S GEL12-4L-BS HVT-03 00412S

More information

Mounting elements for hydraulic cylinders

Mounting elements for hydraulic cylinders Mounting elements for hydraulic cylinders RE 17042/10.07 Replaces: 09.07 1/28 Mounting elements Overview of contents H/A 3121/92 Contents Page Mounting elements 1 Overview of mounting elements 2, 3 Self-aligning

More information

HYDRAULIC CARTRIDGE VALVES

HYDRAULIC CARTRIDGE VALVES HYDRAULIC CARTRIDGE VALVES SOLENOID OPERATED DIRECTIONAL CONTROLS PROPORTIONAL CONTROLS MOTORIZED CONTROLS MECHANICAL DIRECTIONAL CONTROLS MECHANICAL PRESSURE CONTROLS MECHANICAL FLOW CONTROLS FEBRUARY

More information

Delta Power Company 4484 Boeing Drive - Rockford, IL 61109

Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 VALVE CATALOG MAIN INDEX RELEASED DATE: JUNE 03. QUICK SELECTION GUIDE Page SOLENOID OPERATED DIRECTIONAL CONTROLS (See ENGINEERING DATA for coil specs) Page 7 MECHANICAL DIRECTIONAL CONTROLS Page 5 PRESSURE

More information

1 Central Mount Assembly CMA-150 (working range mm ( )) as detailed on price list.

1 Central Mount Assembly CMA-150 (working range mm ( )) as detailed on price list. ORDER FORM - CLASSIC DELIVERY ADDRESS: POSTCODE:... TEL:... Fax:... CONTACT:... Client Ref No:... It is NOT necessary to fill in this portion, but these details would allow the supplier to double check

More information

STANDARDISED MOUNTINGS

STANDARDISED MOUNTINGS STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction

More information

Series 63 ISO cylinders

Series 63 ISO cylinders Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More

More information

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6 AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure

More information

NOTE FTDX9000 CAT OPERATION REFERENCE BOOK FTDX9000 OPERATING MANUAL

NOTE FTDX9000 CAT OPERATION REFERENCE BOOK FTDX9000 OPERATING MANUAL NTE FTD9000 CAT PERATIN REFERENCE BK FTD9000 PERATING MANUAL CAT (CMPUTER AIDED TRANSCEIVER) PERATIN VERVIEW The CAT (Computer Aided Transceiver) System in the FTD9000 provides control of frequency, VF,

More information

8888/8810 Multi-Function Rim Exit Device & Trim 80 Series

8888/8810 Multi-Function Rim Exit Device & Trim 80 Series 8888/8810 Multi- Rim Exit Device & Trim The 8888/8810 Rim Exit Device Devices are A156.3 UL Fire and Panic listed Device is non-handed /BHMA architectural finishes Four standard sizes available To Order:

More information

Radionuclide atomic number A 1 (TBq) A 1 (Ci) A 2 (TBq) A 2 (Ci) (TBq/g) (Ci/g) Ac-225 Actinium(89) x x

Radionuclide atomic number A 1 (TBq) A 1 (Ci) A 2 (TBq) A 2 (Ci) (TBq/g) (Ci/g) Ac-225 Actinium(89) x x Ac-225 Actinium(89) 0.6 16.2 1x10-2 0.270 2.1x10 3 5.8x10 4 Ac-227 40 1080 2x10-5 5.41x10-4 2.7 7.2x10 1 Ac-228 0.6 16.2 0.4 10.8 8.4x10 4 2.2x10 6 Ag-105 Silver(47) 2 54.1 2 54.1 1.1x10 3 3.0x10 4 Ag-108m

More information

Limit Switches and Safety

Limit Switches and Safety and Safety Introduction Overview 3SE5 23., 3SE5 21. 3SF1 2.4 3SE5 24., 3SF1 244 3SE5 13., 3SE5 11., 3SF1 114 3SE5 12., 3SF1 124 3SE5 16. 3SE5 232, 3SE5 212, 3SF1 2.4 3SE5 132, 3SE5 112, 3SF1 1.4 Position

More information

G3 UNIVERSAL GRIP CONFIGURATION GUIDE

G3 UNIVERSAL GRIP CONFIGURATION GUIDE G3 UNIVERSAL GRIP CONFIGURATION GUIDE www.ottoexcellence.com Industrial Grips for Demanding Applications OTTO serves agriculture, construction, off-highway, material handling and specialized industrial

More information

Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:

Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel: Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System

More information

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2 6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6

More information

RUBBERTRACKS MINIEXCAVATOR COMPACTTRACKLOADER TRACKLOADER

RUBBERTRACKS MINIEXCAVATOR COMPACTTRACKLOADER TRACKLOADER MINIEXCAVATOR RUBBERTRACKS COMPACTTRACKLOADER TRACKLOADER We stock a full range of rubber track styles and sizes that properly fit the vast majority of all major manufactures. Rubber Tracks CTP now stocks

More information

Hood Ornaments (Group 8)

Hood Ornaments (Group 8) Hood Ornaments (Group 8) 1937, 1938, 1940 and 1955 Hood Ornaments These quality reproductions are in detail, highly polished and triple chrome plated for long lasting beauty. They have already enhanced

More information

~... se_rv_ic_e M_A_NU_AL_2_44_4._z1,~

~... se_rv_ic_e M_A_NU_AL_2_44_4._z1,~ WABCO... se_rv_ic_e M_A_NU_AL_2_44_4._z1, DN-11 DC NEUTRAL RELAYS PARTS LIST This service manual provides parts lists for 4-, 6-, 8-, and IO-point DN-11 DC Neutral Relays. Included in this Parts List is

More information

ACS2 series. KCC Co., Ltd. PNEUMATIC & HYDRAULIC. ACS2 series. For more info visit us : ACS2 - N LB 32 - S 100

ACS2 series. KCC Co., Ltd. PNEUMATIC & HYDRAULIC. ACS2 series. For more info visit us :  ACS2 - N LB 32 - S 100 KCC Co., Ltd. Symbol Features With auto switch, rubber bumper (Standard). improves lateral load resistance. Double Acting / Single Rod Double Acting / Double Rod Single Acting / Spring Return Single Acting

More information

Starters. Across the line. Across the line starters Open & enclosed A9 AF750. Description A9 AF750. Starters. Enclosure types

Starters. Across the line. Across the line starters Open & enclosed A9 AF750. Description A9 AF750. Starters. Enclosure types Across the line starters & enclosed A9 AF750 Across the line Description A9 AF750 Maximum UL horsepower ratings UL508A Panel Program, #E105450 NEMA s (00 7) available Compact space-saving design Standard

More information

ENGINE PRODUCTS QUICK REFERENCE

ENGINE PRODUCTS QUICK REFERENCE QUICK REFERENCE GUE QUICK REFERENCE CONTENTS Belts & Fan Clutches Page 1 Filters Page 2 Water Pumps Page 3 Caps, Dipsticks & Thermostats Page 3 Hose Products Page 4 Exhaust Pages 5-6 TRUCK BELTS FAN CLUTCHES

More information

CCTV CCTV CATALOG CATALOG ALWAYS SECURE ALWAYS SECURE

CCTV CCTV CATALOG CATALOG ALWAYS SECURE ALWAYS SECURE 1328 S. SANTA FE AVE #101 LOS ANGELES, CA 90021 EMAIL: sales@etcdepot.com T: 213.278.0793-4 F: 213.402.3555 ALWAYS SECURE ALWAYS SECURE CCTV CATALOG 1328 S. Santa Fe Ave. #101 Los Angeles, CA 90021 Tel

More information

issued by Notified Body No according to 2014/32/EU MID FULL QUALITY ASSURANCE Module H

issued by Notified Body No according to 2014/32/EU MID FULL QUALITY ASSURANCE Module H This certificate may not be reproduced other than in full, except with the pri written approval by RISE Certification. issued by Notified Body No. 040 accding to 014/3/EU MID FULL QUALITY ASSURANCE Module

More information

ELM327 OBD to RS232 Interpreter

ELM327 OBD to RS232 Interpreter OBD to RS232 Interpreter Description Almost all new automobiles produced today are required, by law, to provide an interface from which test equipment can obtain diagnostic information. The data transfer

More information

Custom Made Motorcycle Seat Cover Listing. Years Sheepskin Waterproof MB

Custom Made Motorcycle Seat Cover Listing.  Years Sheepskin Waterproof MB @125 Scooter 2002-2006 DS CS11 714 CB 125 1974 DS CSD 1225 CB 125 E 2012 - DS CSD 1048 CA 250 Rebel -1994- TS CS11 403 CB 250 1996-2005 DS CSD 500 CB 250 F -2006- DS CSD 793 CB 400 2008- DS CSD 921 CB

More information

Parts List, Wiring Diagrams

Parts List, Wiring Diagrams Parts List, Wiring Diagrams PAS180-300 SERIES PACKAGE GAS ELECTRIC UNITS TABLE OF CONTENTS PARTS LIST----------- 2-16 PARTS DRAWING - - - - - 17-28 WIRING DIAGRAMS - - - 29-52 Printed in U.S.A. 5/22/08

More information

FULL COLOR TAB #1 TA 7

FULL COLOR TAB #1 TA 7 FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder

More information

AWARD WINNING 2007 AIA BEST NEW PRODUCTS FOR IMPORT CARS OR TRUCKS

AWARD WINNING 2007 AIA BEST NEW PRODUCTS FOR IMPORT CARS OR TRUCKS AWARD WINNING 2007 AIA BEST NEW PRODUCTS FOR IMPORT CARS OR TRUCKS VOL.3 TBK1001 SPARK PLUG TUBE SEAL 4 OIL PUMP SEAL 1 OIL PUMP HOUSING SEAL 1 1987-1989 TOYOTA CELICA ST, GT, 3SFE 1987-2001 TOYOTA CAMRY

More information

REAR WHEEL DRIVE DAMAGED CIRCUIT/LOCATION CODES

REAR WHEEL DRIVE DAMAGED CIRCUIT/LOCATION CODES REAR WHEEL DRIVE DAMAGED CIRCUIT/LOCATION CODES BODY AND REAR END LIGHTING 08-91- Exterior Lighting LA Back-Up, License Lamps LD Park, S/Marker, Tail, Opera Lamps LH Stop Lamp, Hazard Flasher LJ Turn Signal

More information

Replacement Parts. Agristrut. Gas Struts Catalogue

Replacement Parts. Agristrut. Gas Struts Catalogue Replacement Parts Agristrut Gas Struts Catalogue Contents Sparex Gas Strut Catalogue Sparex Limited Exeter Airport Exeter Devon EX5 2LJ Tel: 01392 441338 Fax: 0800 0185027 Web: www.sparex.com E-mail: uksales@sparex.co.uk

More information

5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel

5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel langed Ball Valves, API 67 iresafe ASME Class 1 81 Series eatures Investment cast 2-piece bolted body construction Blow-out proof stem Adjustable, live-loaded graphite packing API 98 inspection and testing

More information

COILS DELTA POWER COMPANY

COILS DELTA POWER COMPANY COILS COMPANY Section / Description page COIL DATA... CD3 IMMERSION PROOF... CD16 GENERAL CARTRIDGE VALVE INSTALLATION NOTES... CD19 CAD INSERTION CODES - 2D... CD20 CAD INSERTION CODES - 3D... CD22 Page

More information

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm > Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI

More information

Parts Manual DC-460NC. Band Sawing Machine

Parts Manual DC-460NC. Band Sawing Machine Parts Manual By DC-60NC Band Sawing Machine MACHINE SPECIFICATIONS MODEL VOLTAGE SERIAL NO. CYCLE PHASE For your information and future reference, insert pertinent data concerning your machine in the spaces

More information

PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting

PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting P/822000/M, P/822000 Smoothline cylinder > 32... 00 mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard

More information

STANDARDISED MOUNTINGS

STANDARDISED MOUNTINGS for PS / PLS / PC cylinders conforming ISO 15552-FNOR-DIN (PS-PLS) ISO 21287 (PC) standards Series 434 MOUNTINGS CONFORMING WITH ISO 21287 - ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications

More information

SYMBOLS & STANDARDS CHEMIN-IIM (XVI E) 1) INSTRUMENT ABBREVIATIONS PRESSURE TEMPERATURE FLOW LEVEL P : PRESSURE

SYMBOLS & STANDARDS CHEMIN-IIM (XVI E) 1) INSTRUMENT ABBREVIATIONS PRESSURE TEMPERATURE FLOW LEVEL P : PRESSURE 1) INSTRUMENT ABBREVIATIONS PRESSURE P : PRESSURE CHEMIN-IIM (XVI E) SYMBOLS & STANDARDS PI : PRESSURE INDICATOR PG : PRESSURE GAUGE PCV : PRESSURE CONTROL VALVE PT : PRESSURE TRANSMITTER PIT : PRESSURE

More information

SPLIT A/C 1.5 TON 5 STAR IBL BS 165

SPLIT A/C 1.5 TON 5 STAR IBL BS 165 INDICATIVE DAMAGE LIST OF SALVAGE ITEMS OF INNOVATIVE TECHNOLOGIES S.No. ITEM NAME QTTY 1 SPLIT INVERTOR A/C 1.5 TON IBL DB149 21 2 SPLIT INVERTOR AC 1.0TON IBL DB149 42 3 SPLIT AC 1.0TON 3STAR IBL S3165

More information

EZ ROLL (ROLLER SHADE) COMPONENTS APRIL 2018

EZ ROLL (ROLLER SHADE) COMPONENTS APRIL 2018 EZ ROLL CLUTCH FOR 1 1/8 TUBING Holds up to 5 lbs. R-CL5-EZ-XX R-CL8-EZ-XX R-CL8-1.5-EZ-XX Used on R-T5-U-1.125 (1 1/8 Tube) - 23 Ball (BK) Black, (SW) Snow White US Patent No. D6300086S China Patent CN201248601Y

More information

Sizes 32, 40, 50 and 63

Sizes 32, 40, 50 and 63 > Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary

More information

10/97 N Our policy is one of continued research and development. We therefore reserve the right

10/97 N Our policy is one of continued research and development. We therefore reserve the right ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting

More information