POMPE À ENGRENAGES GEAR PUMP ASYBCO
|
|
- Roberta Arnold
- 6 years ago
- Views:
Transcription
1 POMPE À ENGRENAGES GEAR PUMP ASYBCO
2 GEAR PUMP Series 5 Canadian General Purpose Designed and engineered to serve petroleum, chemical, process and manufacturing industries. GPM (289 L/m) PSI (690 kpa) /2 to 6 (. to 52 mm) SSU (49 0 CS) Ideally suited for direct drives at nominal motor speeds from 900 to. Capacities to 0 GPM ( LPM). Sizes /4 thru to /2 (9 mm thru to mm). Differential pressure to. (690 kpa). SERIES 2 US Same as 5 Canadian Long shaft non supported by pillow block. SERIES 5 VIKING PUMP Same as 2 US Need bearing to support shaft Series Suction and Discharge Size (In) Viscosity SSU PSI GPM PSI GPM PSI GPM PSI GPM G G 2 H H 4 /4 (NPT) (NPT) (NPT) /2 (NPT)
3 TRUCK AND TRANSPORT ROTARY PUMPS Series 20 VIKING PUMP Liquid transfer service of Fuel oil Kerosene Asphalt Gasoline Diesel oils, industrial liquids Petroleum products Chemical products operating speeds to Capacities to GPM Sizes /4 thru s to Packing gland Multiring, extra deep and long stuffing box, to reduce possible leaks to absolute minimum. Selfadjusting dripproof mechanical seals are available as an optional feature. Selfpriming The series 20 pump is completely selfpriming eliminates vapour locking conditions, excellent vacuum developing characteristics, assures complete pump out in tank truck applications. Shaft Precision ground, extra heavydesigned so as not to deflect or twist under the most severe applications, assures longer sealing and bearing life. ROTARY POSITIVE DISPLACEMENT PUMPS Series 24 Rugged and dependable for demanding applications. Designed and engineered to serve petroleum, chemical, process and manufactured industries. 0 USGPM ( 784 L/m) ( 0 kpa) /2 to 6 (. to 52 mm) SSU (49 0 CS) 6 o F ( o C) Series J24 K24 KK24 L&LQ24 LL24 LM24 Viscosities SSU CS Hydrostatic Test PSI Max. Recommended Temperature Pack Seal o F o C o F o C Speed Max PSI 45 kpa PSI 690 kpa Max PSI 0 kpa US US US GPM LPM GPM LPM GPM LPM (2) Capacities & Power Requirements at Set Differential s
4 JACKETED ROTARY PUMP Series 20 Canadian Series Q 4 US Jacketed s are specifically designed to handle heavy, viscous liquids requiring temperature control to maintain a flowing state, assuring efficient handling of liquid pumped. Number * LQ4 * Q4 M4 N4 ** Port Size Nominal Rating Motor HP Inches GPM PSI PSI 2 / / Maximum Discharge PSI Less than SSU SSU and up Max o T / o F US MODEL Fitted Construction Recommended Above thisviscosity SSU Same as 20 series Canadian Maximum Temperature of Fluid in Jackets Steam (Sat.) Heat Transfer Oil Temp F * Q Size has steel idler ** Ports are suitable for use with # ANSI (ASA) cast iron or # ANSI (ASA) steel companion flanges fittings. Temp o F CANADIAN MODEL Same as 4 series US Maximum Hydrostatic Approximate Shipping Weight Pounds 50 VIKING PUMPS KK 20 2'' (NPT) LQ 20 '' (ANSI) Q 20 4'' (ANSI) M20 5'' (ANSI) N 20 5'' (ANSI) Viscosities SSU H x 4 20 /2'' (NPT) 20 CS Speed Nominal Capacities Based on PSI (45 kpa) USG PM LPM Power Requirements at Set Diffenrential s PSI PSI PSI PSI
5 ROTARY GEAR PUMP Series VIKING PUMPS F FH Series GG 90 '' (NPT) HJ 90 /2'' (NPT) HL 90 /2'' (NPT) AS 90 2 /2'' (NPT) AK 90 2 /2'' (NPT) Capacity GPM Viscosities SSU LPM CS Speed Speed Oil Viscosity SSU CS Nominal Capacity USGPM LPM Power Requirements at Set Differential s PSI HP Power Requirements at Set Differential s PSI 45 kpa PSI HP.. PSI 690 kpa PSI HP PSI 5 kpa PSI HP PSI 0 kpa PSI HP PSI 7 kpa Capacity range : ROTARY GEAR PUMP 6 to 56 GPM SSU o C to 77 o C to GPM.8 to.4 LPM s to : 2 7 kpa Relief valve optional Heavy duty deepgrooved ball type radial and thrust bearing Standard with mechanical shaft seal Series 90 AMMONIA ROTARY PUMPS Series 4 Number Suction and Discharge Size Inches Maximum Rating GPM Maximum Recommended Differential Minimum Recommended Temperature o F JX KX KK L LQ LL /2 npt 2 npt 2 npt 2 npt asa asa s can be used to 60 o F if provision is made for providing heat to oil in seal chamber. 60 GPM PSI 60 o F
6 LPGAS ROTARY PUMPS Series 690 GG '' (NPT) HJ /2'' (NPT) HL /2'' (NPT) AS 2 /2'' (NPT) AK 2 /2'' (NPT) Nominal Capacity USGPM LPM Speed Maximum Recommended Differential Discharge Hydrostatic Test 5 48 USGPM ( LPM) Approx. Shipping Weight LBS KG VIKING PUMPS
7 STAINLESS STEEL SANITARY POSITIVE DISPLACEMENT PUMPS Series VIKING PUMPS. TriLobe Rotors Trilobe rotors are available in the 0 sizes models and are supplied as standard equipment on all other models. 2. MultiLobe Rotors Supplied as standard equipment in the 0 sizes models only and are highly efficient on lower viscosity.. TwinBlade Rotors 0 USGPM million SSU o C Noncorrosive Clean, Hygienic /2 in. thru 6 in. Series 5X 7X 5X X 5 5X 5 5X 20 20X X 0 0X 0 0X 60X Suction and Discharge Size (Inches) /2 /4 /2 /2 /2 / Max Rating (at SSU) USGPM Max. Differential Theoretical Displacement USGPM / Typical Horsepower Range /2 /2 /2 2 /2 5 /2 5 /2 5 /2 5 /2 5 /4 7 /2 /4 7 /2 /4 7 /2 /4 7 / Large particles, such as fruit in jams or meat in pie fillings. GENERAL PURPOSE Thin Liquid No SS SL S2S S2L SS SL S4S S4L Port Size Inches / Nominal Rating GPM Max. Hydrostatic Max Recommended Discharge When Handling SSU Liquid at Rated Speeds Max. Recommended o T o F Approximate Shipping Weight (Less Power) Pounds
8 POSITIVE DISPLACEMENT PUMPS Linco Water, including dirty water, oil, asphalt, paper pulp, molasses, fertilizer slurries, seal coat, crude oil, manure sluries, many mildly abrasive or corrosive liquids. Note : Not suitable for dipolar solvents. Bidirectional pump design reduces plumbing costs and can be used with a reversing PTO or hydraulic drive for loading and unloading operations. Nitrile rotors and bronze bushings are petroleum resistant with a maximum operating temperature of o F. Rotors Hydrin provides moderate abrasion resistance and working temperatures to 2 o F Pentaprene provides high abrasion resistance up to 60 o F Ultraprene combines high abrasion and temperature resistance to o F. Relief valves are available in,, and. 2 MODELS 8 US GPM PSI 0 Flow USGPM Horsepower Flow USGPM Horsepower Flow USGPM Horsepower Flow USGPM Horsepower Flow USGPM Horsepower Rotational Speed () Net Wt. lb. For Relief Valve add 20 lbs MODELS 5 22 US GPM PSI Rotational Speed () Flow USGPM Horsepower Flow USGPM Horsepower Flow USGPM Horsepower Flow USGPM Horsepower Flow USGPM Horsepower Net Wt. 70 lb. For Relief Valve add 0 lbs 4 MODELS 2 0 US GPM PSI Rotational Speed () Flow USGPM Horsepower Flow USGPM Horsepower Flow USGPM Horsepower Flow USGPM Horsepower Flow USGPM Horsepower Net Wt. 70 lb. For Relief Valve add 0 lbs VIKING PUMPS
9 Roper s MEDIUM PRESSURE PUMPS Series F s to psi For Metering, Blending, Fuel Supply at Standard Motor Speeds ROPER PUMPS SERIES F SERIES F General Performance Information Approx. Normal Ap. Temp. Roper Capacity Port Max. Normal Limit Range Size Dr. Std. Spec. Series GPM In. H.P. Const. Const. F.6.5 /2 up to 0 2 o F 2 o F F /2.5 up to 0 2 o F 2 o F F /4 7.5 up to 0 2 o F 2 o F F up to 2 o F 2 o F F 0 2 /2 2 up to 2 o F 2 o F F up to o F 2 o F Materials of Construction Standard Available Housing Cast Iron Gears Stainless * Bearings Bronze Iron* Shaft Hardened Stainless * * Not Available in all Sizes Roper s SERIES F SERIES F GENERAL PURPOSE PUMPS Series 600, 700, 4600, 4700 s to psi For Mixing, Blending, Recirculating, Transfer SERIES 600 SERIES 648 General Performance Information Approx. Normal Ap. Temp. Roper Capacity Port Max. Normal Limit Range Size Dr. Std. Spec. Series GPM In. H.P. Const. Const up to o F o F up to o F o F up to o F o F up to o F o F up to o F o F up to o F o F Materials of Construction Standard Available Housing Cast Iron Ductile Iron* Gears Hardened Bronze Alloy Bearings Bronze Iron or Carbon Shaft Hardened Stainless * * Not Available in all Sizes SERIES 722 SERIES 4622 Jacketed
10 STAINLESS STEEL PUMPS Roper s Series 2600, 2700, , s to psi For Virtually Any Industrial Chemical SERIES SERIES 2722 LOW PRESSURE PUMPS General Performance Information Approx. Normal Ap. Roper Capacity Port Max. Normal Temp. Range Size Dr. Limit Series GPM In. H.P /4 up to 0 o F /4 up to o F up to 0 o F up to 900 o F up to 900 o F up to 900 o F Materials of Construction Standard Available Housing 6 Stainless Gears Special Hardened Hardenable 4 Nickel Stainless Stainless * Bearings Carbon Shaft 6 Hardened Stainless 4 Stainless * * Available in 2622, 2722 only Series A s to psi For ing Clean Liquids at Standard Motor Speeds Roper s SERIES SERIES 2622 ROPER PUMPS SERIES AM 02 SERIES AM 2 General Performance Information Approx. Normal Ap. Temp. Roper Capacity Port Max. Normal Limit Range Size Dr. Std. Spec. Series GPM In. H.P. Const. Const. A /8.5 up to o F o F A /8 up to o F o F A 0 2 /4 up to o F o F A 08 4 /4 up to 0 2 o F o F A /4 4 up to 0 2 o F o F A up to 0 2 o F o F Materials of Construction Standard Available Housing Cast Iron Ductile Iron* Gears Hardened Bearings Bronze Iron or Carbon Shaft Hardened * Not Available in all Sizes SERIES AM 6 SERIES AP 2
11 Tuthill CAST IRON AND CAST STEEL ST Series TUTHILL Number Cast Iron & Cast STI / STC 009 STI / STC 05 STI / STC 00 STI / STC A STI A STC B STI / STC 5 STI / STC 2 STI / STC 2 STI / STC STI / STC Port Size IN / MM Nominal Capacity At Maximum GPM / LPM Max Max Differential PSI / BAR Hydrostatic Test PSI / BAR Tuthill STAINLESS STEEL ST Series Number Cast Iron & Cast STS A0 STS A06 STS 009 STS 05 STS 00 STS A STS B STS 5 STS 2 STS 2 STS Port Size IN / MM Nominal Capacity At Maximum GPM / LPM Max Max Differential PSI / BAR 7 7 Hydrostatic Test PSI / BAR
12 PROCESS PUMPS Tuthill HD Series High viscosity High pressure Run dry without damage High temperature For metering or transfer High vacuum External bearing chamber Slow speed for longer wear and lower shear Reversible Wide range of drives and mountings Industrial Duty 0 SSU / 8 Centipoise 0 psi / 0 bar psi /.4 bar psi / 6.9 bar psi /. bar Size GPM LPM HP KW GPM LPM HP KW GPM LPM HP KW GPM LPM HP KW A A 70A A 20A TUTHILL Standard Duty 0 SSU / 8 Centipoise 0 psi / 0 bar psi /.4 bar psi / 6.9 bar psi /. bar Size GPM LPM HP KW GPM LPM HP KW GPM LPM HP KW GPM LPM HP KW A A A & H
13 Rotocan GEAR PUMP WILLIAMS ROTOCAN RC SERIES s RC RC RC RC RC RC 2 RC RC RC 0 RC 600 RC 60 RC 0 RC B Cast iron construction with bronze bushing and packed gland Pour produits à haute viscosité & corrosifs For viscous & corrosifs liquids Asphalte liquide Liquid asphalte Acide sulfurique Sulphuric acid Peinture Paint SD Glucose Mélasse Molasse Williams Pâtes lourdes Heavy paste RS SERIES RS C2 6 stainless steel construction with carbon bushings and teflon packed gland ROTARY PISTON PUMPS Disponible en fer, bronze ou acier Available in iron, bronze or steel Rotor assembly SD View of SD showing flow
UNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View
More informationVIKING GENERAL PURPOSE PUMPS SERIES 32 AND 432
Page 310.1 FEATURES SERIES 32 and 432 3 GPM (.7 m³/hr) Size Shown. or Mechanical seal type. Valve on casing. SERIES 432 5 GPM (1 m³/hr) Mechanical seal type. Shown with valve on head. C, F & FH Sizes J
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
UNIVERSAL PRODUCT LINE: SERIES 227A, 4227A, 327A, 4327A Section 1702 Page 1702.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable
More informationA Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer
THE LEADING FORCE behind liquids since 1857 A Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer The Roper Pump Family of Gear
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Standard Pump (shown: KK123A) Jacketed Pump (shown: KK4223A) Nominal Flow Rates: Pump
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
More informationNominal Flow. Pressure Range. Temp. Range. Viscosity Range. Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Stainless Steel.
Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Standard Pump (shown: KK124A) Operating Range 1 : Cast Iron Series: 124A/AE, 4124A/AE, 324A, 4324A, 224A/AE, 4224A/AE
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationVIKING HEAVY DUTY PUMPS SERIES 225 AND 4225 JACKETED BRACKET, STANDARD CONSTRUCTION FEATURES
VIKING HEAVY DUTY PUMPS JACKETED BRACKET, STARD CONSTRUCTION FEATURES SERIES 5 Pumps Cutaway View 5-0-60-80-5 GPM Sizes (-7--8- m³/hr) Section Page. Issue C MECHANICAL SEAL (SERIES 5) H - LL SIZES LS -
More informationV Rev US
V - 0805 Rev. 05 - US APPLICATIONS INDUSTRIES V series internal gear rotary pumps are suitable for pumping liquids of any viscosity. Solids cannot be handled, but the pumps can cope with abrasive particles.
More informationUNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE:
Page 1401.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features (124A/AE, 4124A/AE, 324A, 4324A)...4
More informationVIKING HEAVY DUTY ALLOY PUMPS SERIES 724 AND 4724
VIKING HEAVY DUTY ALLOY PUMPS Section 210 Page 210.1 FEATURES SERIES 4724 Cutaway View Mechanical, 1½, 3 and 5 GPM Sizes 1 Range 200 PSI (14 BAR) for (21 cst) and above (Small Pumps F, FH and G sizes)
More informationVISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
UNIVERSL PRODUCT LINE: SERIES 724, 4724 Section 1706 Page 1706.1 Issue B TBLE OF CONTENTS Features & Benefits...2 Cutaway View & Pump Features...2 Model Number Key...3 Standard Materials of Construction...3
More informationTHE LEADING FORCE behind liquids since 1857
THE LEADING FORCE behind liquids since 1857 High Capacity Bulk Liquid Handling Pumps - For loading/unloading transport truck tankers, railway tank cars, and barges - High flow rate transfer capability
More informationGEAR PUMPS TOUGH INTERNAL GEAR SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE
TOUGH INTERNAL GEAR GEAR PUMPS SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products,
More informationTHE LEADING FORCE behind liquids TM since Rotary Positive Displacement Pumps
THE LEADING FORCE behind liquids TM since 1857 Rotary Positive Displacement Pumps External Gear 3600 Series General purpose pumps for transferring, mixing, blending and recirculating. Efficiently handles
More informationVIKING JACKETED ASPHALT PUMPS
VIKING ED ASPHALT PUMPS SERIES 34 AND 434 Section 430 Page 430.1 Issue G FEATURES 1 Pressure 1 Temperature 1 Viscosity 1 Flow To 100 PSI (6.9 Bar) -60 F. to +450 F. (-51 C. to +232 C.) 31 SSU to 250,000
More informationL Q LIQUID-SPECIFIC PRODUCT LINE: CAST IRON ASPHALT PUMPS SERIES DESCRIPTION (34 & 32E) OPERATING RANGE: MODEL NUMBER KEY:
LIQUID-SPECIFIC PRODUCT LINE: SERIES 4A, 4AE, 44A, 44AE, 34A, 434A, 14E, 34E, 34, 3E Section 430 Page 430.1 Issue S SERIES DESCRIPTION (34 & 3E) Viking 34 Series Asphalt Pumps are designed to handle asphalts,
More informationTOUGH SIMPLE GEAR PUMPS COST EFFECTIVE TOUGH SIMPLE COST EFFECTIVE. Tel: / Int'l: Fax: / Int'l:
GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction
More information3600 Series Heavy Duty Pumps General Purpose Pumps for Mixing, Blending, Recirculating, Fixed and Mobile Transfer
THE LEADING FORCE behind liquids since 187 300 Series Heavy Duty Pumps General Purpose Pumps for Mixing, Blending, Recirculating, Fixed and Mobile Transfer JH Process Equipment Inc. 17 Jeffers Circle,
More informationGEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE
GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction
More informationPRODUCT OBSOLETED 1Q16
STANDARD CONSTRUCTION FEATURES Page 141.1 SERIES 15 Pumps Cutaway View (Packed Type) 8-15-0 GPM Sizes (--7 m³/hr) MECHANICAL SEAL (SERIES 415) G - HL, K - LL SIZES AK, AL, LS - M SIZES BRACKET 5 416 SHAFT
More informationNominal Flow Pressure Range Temp. Range Viscosity Range
VIKING UNIVERSL XPD 676 PUMPS - FULL COMPLINCE with PI 676 STNDRDS SERIES 4223X & 4323X Section 633 Page 633.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps Offering Full Compliance with PI 676 Design Standards
More informationVIKING HEAVY DUTY PUMPS SERIES 4197 STAINLESS STEEL FEATURES
VIKING HEAVY DUTY PUMPS FEATURES Section 64 Page 64. s Cutaway View 0--0 GPM Sizes (2-4.5-7 m³/hr) s Cutaway View 5-50-75 GPM Sizes (8--7 m³/hr) Pressure Range Temperature Range Viscosity Range 0 PSI (4
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are
More informationProduct Range IDEX CORPORATION
Product Range IDEX CORPORATION Viking Pump provides an unmatched combination of application expertise and positive displacement pumping products to meet your pumping needs. We specialize in the design,
More information8L SERIES THREE SCREW PUMPS
TM 8L SERIES THREE SCREW PUMPS The reliable pump people ROTARY SCREW PUMPS Performance Shown at 1500 PSID (103 BAR), 200 SSU (43 CST) 60 HZ: 870 1150 1750 50 HZ: 960 1450 1200 1100 630M 40 250 1000 900
More informationPRODUCT OBSOLETED 1Q16
VIKING HEAVY DUTY PUMPS FEATURES Section 6 Page 6. Issue C 9 SERIES 27 s Cutaway View (Packed Type) 60-200-280 GPM Sizes (36-45-64 m³/hr) Shown without over-pressure relief valve MECHANICAL SEAL (SERIES
More informationPIPELINE INJECTION PRODUCTS
PIPELINE INJECTION PRODUCTS DURABLE & RELIABLE SOLUTIONS PIPELINE INJECTION PUMP GP-10 & GP-1 SERIES Flows up to: 210 GPM / BPH / 7,20 BPD (nominal flow) BUSHINGS BACK PULL OUT SEAL HEAD DRIVER SHAFT DRIVEN
More informationVIKING. Series LVP STAINLESS STEEL VANE PUMP. VIKING PUMP A Unit of IDEX Corporation Cedar Falls, IA 2016 PRODUCT DESCRIPTION SERIES OPERATING RANGE
Page 445.1 PRODUCT DESCRIPTION Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping liquid through a cam-shaped
More informationViking Helical Gear Reducers
Page 610.1 Issue J Gear Ratio Range: (varies by reducer size) 1.87:1 to 7.95:1 Output Speeds (with 1750 rpm input) Reducer Horsepower Range: 950 to 220 rpm 1.4 HP (.1 kw) to 49.8 HP (37.2 kw) THREE SIZES
More informationPositive Displacement Rotary Vane Pumps For Fluid Processing and Transfer Applications
Full Line Bulletin One Section: 100 Effective: March 2014 Replaces: February 2012 Positive Displacement Rotary s For Fluid Processing and Transfer Applications Blackmer Fluid Processing and Transfer s
More informationMOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
More informationEngineering Data Pack GlobalGear Series Pump US
Engineering Data Pack GlobalGear Series Pump US Excellence at work. Excellence in life. Table of Contents GG015 - GG030 with Angle Ports (Flanged Only) Mounting Dimensions 3 IG015I - IG030I with Integral
More informationViking s helical gear reducers are available in three basic sizes, each size offering several gear ratios.
PARTS & ACCESSORIES: SIZES A, B & C Section 610 Page 610.1 Issue L Gear Ratio Range: (varies by reducer size) 1.87:1 to 7.95:1 Output Speeds (with 1750 rpm input) 950 to 220 rpm Reducer Horsepower Range:
More information********************************* Action Not Allowed
Page 194 To Order Call: 1.877.DBL.TANK 1.877.325.8265 Pumps Jabsco 2 and 2-1/2 Pumps... 195 Viking/Viking, Waukesha 130, Flotech uni-bloc 551, Ranger 11, 17, 22 Series/Roper 3622... 196 Blackmer ATX Aluminum
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More informationMOTOR SPEED PRODUCT LINE: CAST IRON MAG DRIVE PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
MOTOR SPEED PRODUCT LINE: SERIES 895 Section 1443 Page 1443.1 Issue B TBLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Key...3 Cutaway View & Pump Features...3 Specifications...4
More informationVIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS
Page 350.1 Series Description Viking s HG series positive displacement pumps are designed to provide low noise transfer and processing of clean, lubricating liquids for applications such as lube oils,
More informationLACT PERFORMANCE PRODUCTS
LACT PRODUCTS DURABLE & RELIABLE SOLUTIONS BOLTS PLUG LID Low Pressure Drop Inclined basket design for low pressure drop and high system efficiency O-RING Easy to Clean Top basket removal eliminates the
More informationViking SL Industrial Lobe Pump Series
Section 288 Page 288. Viking SL Industrial Lobe Pump Series This product brings gentle low shear pumping action with in-line cleaning capabilities to the industrial markets. Rugged enough for corrosive
More informationVIKING. Viking Mag Drive Series 855. Ideal for: Hard-to-Seal Liquids 24/7 Operations Hazardous and Toxic Liquids
Viking Mag Drive Series 855 VIKING Ideal for: Hard-to-Seal Liquids 24/7 Operations Hazardous and Toxic Liquids Capacity to 29.5 M 3 /Hr (130 GPM) Pressure to 14 Bar (200 PSI) Viscosity to 55,000 cst (250,000
More informationFLOWSERVE CORPORATION GA / GR / Gearex Pumps. Rotary Gear Pumps Product Training Program
FLOWSERVE CORPORATION GA / GR / Gearex Pumps Rotary Gear Pumps Product Training Program April 2017 The Major Pump Groups 1,000,000 Viscosity Limit (SSU) 100,000 10,000 1,000 100 10 Rotary Recip'g Centrifugal
More informationLIQUID-SPECIFIC PRODUCT LINE: STAINLESS STEEL VANE PUMPS PRODUCT DESCRIPTION SERIES OPERATING RANGE 1 NOMINAL FLOW RATES 2
Page 445.1 PRODUCT DESCRIPTION SERIES OPERATING RANGE 1 Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping liquid
More informationModel 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
More informationVIKING MOTOR SPEED INTERNAL GEAR PUMPS
VIKING MOTOR SPEED Series Description Vikg s Motor Speed series ternal gear pumps represent a technological advance the science of flow. Through new techniques of feedg the rotor and idler, Vikg has achieved
More informationabcdef EJseries Self-Priming Centrifugal Pumps where innovation flows SNG
abcdef SNG 9 where innovation flows Self-Priming Centrifugal Pumps EJseries www.euroflopumps.com Coding System EJseries Series EJS = Shaft Sewage Bare Pumps EJT = Large Flow Trash Pumps EJU = High Head
More informationCLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM
CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM DESCRIPTION Series S pumps are general purpose positive displacement gear pumps and are a good choice
More informationBSM ROTARY GEAR PUMPS
-SERIES FLG. MTD. PUMP PUMP FOOT The BSM -Series pumps are designed to provide quiet and efficient service at standard motor speeds, moderately high pressures. Typical applications are supplying hydraulic
More informationVIKING. Series LVP. VIKING PUMP A Unit of IDEX Corporation Cedar Falls, IA Section 445 Page Issue C
VIKING Section 445 Page 445.1 Issue C PRODUCT DESCRIPTION Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationVIKING SPUR GEAR SINGLE PUMPS SERIES SG-04, SG-05, SG-07 AND SGN-05, SGN-07 STANDARD CONSTRUCTION FEATURES
VIKING SPUR GEAR SINGLE PUMPS FEATURES Section 34 Page 34. SERIES SG-04 and SG-05 Pumps Cutaway View.0 to.2 GPM Sizes (.0 to 2.5 m³/hr) SERIES SG-07 Pump Cutaway View 2.8 to 32.0 GPM Sizes (. to 7 m³/hr)
More informationSPECIFICATION DATA. 200 SERIES MOTORIZED 203, 204, 205 and 220 MODELS
Section: Page: 1 of 2 Date: March 30, 1996 SPECIFICATION DATA 200 SERIES MOTORIZED 203, 204, 205 and 220 MODELS PORT SIZES MODELS SUCTION DISCHARGE All dimensions are in inches. Specifications subject
More informationVIKING ENGINEERING DATA
VIKING ENGINEERING DATA Section 5 Page 5.1 VIKING ROTARY PUMPS OPERATE EQUALLY WELL IN EITHER DIRECTION! 1 The colored portion at left indicates the liquid as it enters the suction port area of the casing
More informationTRITEC SERIES THREE SCREW PUMPS
TM TRITEC SERIES THREE SCREW PUMPS The reliable pump people ROTARY SCREW PUMPS Performance Shown at 3500 RPM, 1.0 Centistokes DIFFERENTIAL PRESSURE, bar 280 0 20 40 60 80 1100 260 1000 440-46 Low Viscosity
More informationVIKING SG SERIES SEALLESS MAG DRIVE PUMPS
SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and
More informationRS Multi-Stage, Ring Section Pumps
RS Multi-Stage, Ring Section Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The RS Series is Carver s multi-stage pump for fluids at moderate to high pressures. The
More informationVIKING HEAVY DUTY PUMPS
SERIES 495 STANDARD CONSTRUCTION Section 44 Page 44. Issue D FEATURES Range Temperature Range Viscosity Range 250 PSI (7 BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU ( cst to cst) 00
More informationCRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38
CRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38 1 ease of installation & maintenance Install like a valve Mount in the pipeline Support on pipe or foundation... Save space - save time
More informationEngineering Data Pack C Series and 4300 Series Pumps
Engineering Data Pack Series and 4300 Series Pumps Excellence at work. Excellence in life. Table of ontents Product Overview 3 2F Features 3 2E Features 3 2B/4310 Features 3 K2B Features 3 2FA Features
More informationVIKING SG SERIES SINGLE PUMPS (WITH SHAFT SEAL)
SERIES SG-04, -05, -07, -10, -14 () Page 341.1.1 OPERATING RANGE: SERIES SG-04/-05 PUMP SG Pumps (, Lip or Mechanical Sealed) Displacements No. 29 Flow Range Pressure Range Temperature Range Viscosity
More informationPWA ANSI / ASME B73.1 PROCESS PUMP
PWA ANSI / ASME B73.1 PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no
More informationSealless Mag Drive Pumps For Crucial Liquid Containment Applications
Viking Mag Drive Pumps Sealless Mag Drive Pumps For Crucial Liquid Containment Applications Eliminates pump seal maintenance Highest level of liquid containment available Metric or U.S. Design Sizes in
More informationMA-40M(L)(H) TRIPLEX PLUNGER PUMP
MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed...550 rpm Stroke Length...2.5 in. 63.5 mm Maximum Rated Power...40.0 hp 29.8 kw Maximum Rod Load...3456 lbs. 15.3 kn Weight MA-40M...750
More informationEBSRAY PUMPS. MD & HD Series. All Models...for Industrial Applications HEAD OFFICE AND WORKS. ISO 9001 Lic 3332 Standards Australia
Publication # 1521-03 EBSRAY PUMPS Quality Endorsed Company ISO 9001 Lic 3332 Standards Australia HEAD OFFICE AND WORKS MD & HD Series All Models...for Industrial Applications MD & HD Series - Internal
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationVIKING HEAVY DUTY PUMPS SERIES 4193 AND 493 STEEL EXTERNALS FEATURES
VIKING HEAVY DUTY PUMPS SERIES 49 AND 49 FEATURES Section 54 Page 54. Issue C Pressure Range 2 Temperature Range Viscosity Range 250 PSI ( BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationPWA-IL B73.2 IN-LINE
PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP COMPETITIVE ADVANTAGES vs. Ductile Iron n High-strength, impact resistant liquid ends for improved durability and
More informationM20 Duplex Pump Data C8 Controller Data Sheet
Submittal Information Item M20 Title Duplex Fuel Oil Pump Specificatiions Flow Rate Motor HP Volt-Ph-Hz Special Items Contents Title Page M20 Duplex Pump Data C8 Controller Data Sheet Drawing and 3D Model
More informationDimensions: 48 Wide x 96 Long x 88 Tall (with exhaust stack), 1,445 pounds
Enviro-Equipment Inc. 10120 Industrial Drive Pineville NC 28134 Stock#: EEI-1313 Status: In Stock, Tested Dimensions: 48 Wide x 96 Long x 88 Tall (with exhaust stack), 1,445 pounds Description: Soil Vapor
More informationOne & Two Stage Turbine Type Pumps
0A Series APO One & Two Stage Turbine Type Pumps apacities to 0 GPM Heads to 700 Feet Temperatures to 7 F Standard Bronze fitted construction Hydraulically balanced bronze impeller Right- or left-hand
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationPV Series Vane Truck Pumps
PV Series Vane Truck Pumps ISO 900-008 PV Series Pumps General Introduction Versa vane truck pumps are specifically designed to comply with the pumping requirements demanded by the LPG industry. Bulk delivery
More informationAURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
More informationShearseal Knife Gate Valves. Manufactured by TSE
Shearseal Knife Gate Valves Manufactured by TSE Shearseal Design Most knife gate valve manufacturers describe their valve as rugged and dependable. In the Shearseal Valve, these qualities are not idle
More informationBristol: A History & Future.
Fire Pumps Bristol: A History & Future. In 1971, seven emirates joined forces to create the United Arab Emirates, with the goal of becoming a growing leader on an international scale. The UAE s focus has
More informationTopGear. Gear Pumps JOHNSON PUMP
TopGear Gear Pumps JOHNSON PUMP Axiom Technologies-Kolkata Ph:+91 33 32951385 admin@axiomtech.co.in TopGear When reliability is the priority Gear pumps are used in all types of manufacturing industries
More informationJH Process Equipment Inc. 617 Jeffers Circle, Exton, PA
Progressing Cavity Pumps Setting the Standard for Premium Quality Products If you re pumping viscous, abrasive, shear sensitive, or solids-containing materials... If your process involves extremely thick
More informationVISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
SERIES 493, 493 Section 34 Page 34. TBLE OF CONTENTS Features & Benefits...2 Specifications...2 Standard Materials of Construction...2 Key...3 Cutaway View & Pump Features...3 Mountg Options...4 Dimensions
More informationModel Z4500 Stationary Pump
LPGCVP3C Sales Catalog for Stationary and Truck Pumps Model Z32 Truck Pump Model Z35 Stationary and Truck Pump Model Z45 Stationary Pump Model C51 Direct-Coupled Mounting Model 121 Stationary Coro-Vane
More informationMOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1441 Page 1441.
MOTOR SPD PRODCT LIN: SRIS 495, 495 Section 44 Page 44. Issue TL OF CONTNTS Features & enefits...2 Standard Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4 Mounting
More informationPackaged Pump Sets FOR DIESEL FUEL OIL APPLICATION. Packaged Pump Sets for Diesel/Fuel Oil Application Page 1
Packaged Pump Sets for Diesel/Fuel Oil Application Page 1 Packaged Pump Sets FOR DIESEL FUEL OIL APPLICATION Packaged Pump Sets for Diesel/Fuel Oil Application Page 2 Description Simplex SPS Series Packaged
More informationZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps
ZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps Main Applications Features and Benefits ZPP and Z22 double suction axially split single stage centrifugal pumps are used for demanding
More informationSeries M and MA Positive Displacement Flow Meters
Series M and MA Positive Displacement low Meters Liquid Controls M and MA Series rotary motion positive displacement (PD) meters offer the ultimate in measurement accuracy for custody transfer of petroleum
More informationContents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationGusher s s Advantages
Gusher s s Advantages R&D in Pump design Gusher s s Advantages Gusher Vertical Cantilever Pumps up to 15,000 GPM Gusher Vortex Pumps Special Mounting Plates Gusher SC-CC CC Stainless & Cast Iron Gusher
More informationAxially Split Case Pumps
Axially Split Case Pumps A-C Pump A-C SPL Standard Design Features for a Wide Range of Heavy Duty In STUFFING BOX Packing is standard on the A-C products. A wide variety of mechanical seals, including
More informationModel T25 Triplex Power Pump
weatherford Model t25 triplex power pump Model T25 Triplex Power Pump Pump and Fluid Systems Weatherford s Model T25 is a single-acting, triplex plunger pump rated at 23 HP in continuous duty service and
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationVIKING. Metric Motor Speed Pumps
Metric Motor Speed Pumps VIKING Serving Applications For: Chemical Processors Grain Processors Rotating Equipment OEMs Petroleum Products And Many Others Flows: to 45 M 3 /Hr Pressures: to 17 BAR Viscosities:
More informationROTAN INTERNAL GEAR PUMPS. Serving industry since 1921 Available in cast iron, carbon steel, and stainless steel construction
DESMI INC. ROTAN INTERNAL GEAR PUMPS Serving industry since 1921 Available in cast iron, carbon steel, and stainless steel construction GP/HD/PD/CD/MD SERIES DESMI ROTAN, one of the world s leading manufacturers
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationKW Submersible, Single-Vane Impeller
Sewage Pumps KW Submersible, Single-Vane Impeller Performance Curve Total Head (FT) Up to 2 Solids-Handling Heavy-Duty, Silicon Carbide Seals Stainless Steel Keyed Shaft Flows to 325 GPM / Heads to 95
More information