9100 SERIES Model 20 MERCER VALVE THINK...MERCER FIRST
|
|
|
- Martha Cox
- 6 years ago
- Views:
Transcription
1 9100 SERIES Model 20 MERCER VALVE THINK...MERCER FIRST
2 9100 Series Model 20 Product Overview The 9100 Series Model 20 is a high pressure safety relief valve designed for CNG and other high pressure applications. The 9100 Series Model 20 unique design coupled with our patented Auto Seat Technology allows for a longer life, less leakage and more consistent set pressures in high pressure applications. The 9100 Series Model 20 is designed for applications from 3000 psi up to 8700 psi. The patented soft seat design and fully guided disk allow the valve to continually outlast the competition. The soft seat 9100 Series has a field-proven lip seal design, which allows for a tighter seal up to set pressure. This tight seal reduces leaks and limits product loss Series Model 20 Features Designed with Auto Seat Technology. Consistent Set Pressures allowing repeatable uses without repair or resetting. Open, Close, Seat and Seal. Fully guided disk keeps the disk properly alligned, opening and closing, helping to reseat the valve. Mechanical Stop prevents wear on parts and controls valve lift. Low rated and fully guided spring allows for more consistent set pressures from pop to pop. Pop Action relief allows valve to go to full lift at set pressure. Helps with DOT regulated applications. Built in accordance with the requirements of ASME Boiler and Pressure Vessel Code. Sec. VIII Div 1. Non-rising stems allowing valves to be installed in small areas
3 9100 Series Model 20 Specifications Orifice Letter C D Threaded Connections 3/4 x 1, 1 x 1 1 x 1 1/4 Flanged Connectors 1 x 1 1/2 1 x 1 1/2, 1 x 2 Actual Orifice Diameter (in) Actual Orifice Area (in 2 ) API Orifice Area (in 2 ) Threaded Pressure Ranges (psi) 3000 to to 7500 Flanged Pressure Ranges (psi) 3000 to to 6170 Standard Temperature Range (ºF) -20 to to 400 ASME Flow Coefficient, K d (Gas) ASME Flow Coefficient, K d (Liquid) NOTE: Mercer Valve reserves the right to change product designs and specifications without notice
4 9100 Series Model 20 Dimensions and Weights INLET AND OUTLET CODE INLET AND OUTLET SIZE PRESSURE LIMIT (psi) DIMENSIONS A X B X C (IN.) + 1/16 APPROX. WEIGHT (lbs.) C ORIFICE M2 3/4 MNPT x 1 FNPT /4 x 1-13/16 x 8-1/8 4.5 M7 1 MPT x 1 FNPT /4 x 1-13/16 x 8-1/ # x 1 1/2 300# X 5-1/4 X # x 1 1/2 300# X 5-1/4 X D ORIFICE M7 1 MPT x 1 1/4 FNPT /4 x 1-13/16 x 9-1/ # x 1 1/2 300# X 5-1/4 X # x 1 1/2 300# X 5-1/4 X # x 2 300# X 5-1/4 X # x 2 300# X 5-1/4 X NOTE: Mercer valve reserves the right to change product designs and specifications without notice
5 9100 Series Model 20 Parts and Materials SERIES MODEL 20 C & D ORIFICES ITEM NO PART NAME STANDARD MATERIALS 1 INLET BASE STAINLESS STEEL 2 BASE SEAL SOFT STEEL 3 BODY SUBASSEMBLY CARBON STEEL 4 NOZZLE O-RING VITON 5 NOZZLE SUBASSEMBLY STAINLESS STEEL WITH SOFT SEAT 6 DISK SUBASSEMBLY STAINLESS STEEL 7 SET SPRING STAINLESS STEEL 8 ADJUSTMENT SCREW STAINLESS STEEL 9 ADJUSTMENT BUSHING CARBON STEEL 10 THRUST WASHER STAINLESS STEEL 11 ADJUSTMENT SCREW O-RING BUNA N 12 CLOSED CAP ALUMINUM ALLOY 13 LOCKNUT CARBON STEEL 14 WASHER CARBON STEEL 15 BONNET SUBASSEMBLY CARBON STEEL NOTE: Mercer Valve reserves the right to change product designs and specifications without notice
6 9100 Series Model 20 Capacity Charts AIR CAPACITY AT 60ºF AND STD ATMOSPHERIC CONDITIONS Set Pressure (psi) C D SCFM SCFM
7 NATURAL GAS CAPACITY AT 60ºF AND STD ATMOSPHERIC CONDITIONS Set Pressure (psi) C D SCFM SCFM
8 NATURAL GAS CAPACITY AT 60ºF AND STD ATMOSPHERIC CONDITIONS Set Pressure (psi) C D MMSCFD MMSCFD
9 CAPACITY IN GPM WATER AT 60ºF AND STD ATMOSPHERIC CONDITIONS Set Pressure (psi) C D GPM GPM
10 9100 Series Model 20 Product Numbering System 91 - M2 D 6 1 VALVE SERIES Series INLET & OUTLET COMBINATION (See Selection Table Page 4) ORIFICE SIZE C or D INLET BASE & BODY MATERIAL FLANGED 1 RF x RF / CARBON STEEL 2 RF x RF / STAINLESS STEEL 3 RTJ x RF / CARBON STEEL 4 RTJ x RF / STAINLESS STEEL A RTJ x RTJ / CARBON STEEL B RTJ x RTJ / STAINLESS STEEL THREADED STNLS STL/WCB CARBON STEEL STNLS STL/CF3M STAINLESS STEEL CAP TYPE 1 CLOSED CAP 2 OPEN LIFT LEVER 3 CLOSED LIFT LEVER CONSULT FACTORY FOR ADDITIONAL INFORMATION AND OPTIONS NOTE: Mercer Valve reserves the right to change product designs and specifications without notice
11 P DIGIT SPECIAL CODE (IF APPLICABLE ASSIGNED BY MERCER) O-RING MATERIAL 1 STANDARD O-RINGS (VITON & BUNA-N) TRIM CODES 4 440C DISK & NOZZLE (STD GAS SERVICE) L LIQUID SERVICE 316 S.S. DISK & NOZZLE N SOUR GAS SERVICE 316 S.S. DISK & NOZZLE B SOUR LIQUID SERVICE 316 S.S. DISK & NOZZLE U GAS SERVICE 316 S.S. DISK & NOZZLE X ALL 316 S.S. INTERNALS SPRING CODE (ASSIGNED BY MERCER) SEAT MATERIAL P VIRGIN PEEK Y VESPEL
12 9100 SERIES MODEL 20 CATALOG CORPORATE HEADQUARTERS 9609 NW 4th STREET OKLAHOMA CITY, OK PHONE: (405) , FAX: (405) HOUSTON BRANCH OFFICE 6218 LONG DRIVE HOUSTON, TX PHONE: (713) , FAX: (713) CALGARY BRANCH OFFICE #203, rd St. NE CALGARY, ALBERTA T2E 7A4 PHONE: (403) , FAX: (403) BRIDGEPORT, TX BRANCH OFFICE 5758 US Highway 380 BRIDGEPORT, TX PHONE: (940) , FAX: (940) CHICAGO BRANCH OFFICE CUSTOMER RELATIONS DEPARTMENT P.O. Box 597 Libertyville, IL MVC91MOD20 REVISION DATE: 4/08 SUPERCEDES 1/07
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in soft seat, high flow rate, pressure relieving
MERCER VALVE SERIES Threaded THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 SERIES Threaded MERCER VALVE THINK...MERCER FIRST 9100 Series Threaded Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the
MERCER VALVE 8100 SERIES THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 8100 SERIES MERCER VALVE THINK...MERCER FIRST 8100 Series Product Overview The Mercer Valve 8100 Series Pressure Relief Valve is State of the Art in soft seat,
MERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in
MERCER VALVE 1400 SERIES THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 1400 SERIES MERCER VALVE THINK...MERCER FIRST 1400 Series Product Overview The 1400 Series is a safety relief valve designed for lower capacity systems. The
MERCER VALVE GENERAL INFORMATION
THINK...MERCER FIRST MERCER VALVE GENERAL INFORMATION Mercer Valve Company 1980s Mercer valve was founded by Wesley Taylor with his Auto Seat Technology patent for pressure relief valves. Mercer s first
MERCER VALVE GENERAL INFORMATION THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY GENERAL INFORMATION MERCER VALVE THINK...MERCER FIRST Mercer Valve Company Mercer Valve Company, Inc. was founded by Wesley Taylor with his patented design for
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
Table of Contents. 1900/P3 Series Exposed spring design - The spring in this design is exposed for atmospheric cooling. D through T orifice sizes.
Scope of Design Table of Contents Scope of Design...............................................................1900P.1 Materials 1900/P1 (Conventional)......................................................1900P.3
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
SV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
F84L & F88 Series Spring-Operated Liquid Service Pressure Relief Valves
THE NEXT GENERATION F84L & F88 Series Spring-Operated Liquid Service Pressure Relief Valves Catalog# F84L1296REVC0916 EXPERTS IN SOFT SEAT VALVE TECHNOLOGY CONTENTS INTRODUCTION AND FEATURES SECTION Introduction
AN ISO 9001:2008 CERTIFIED COMPANY. Safety Valve
AN ISO 9001:2008 CERTIFIED COMPANY Safety Valve SAFETY VALVE FEATURE : - The Cr-V spring & novel disc & seat design provide reliable bubble tight seal. - Excellent re-seating ability - It features heavy-duty
Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
Index. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
KINGSTON. Model 710. Side Outlet Safety Relief Valve. Manufacturing reliable industrial valves for industry since 1908.
KEst.1908 KINGSTON Manufacturing reliable industrial valves for industry since 1908. Model 710 Side Outlet Safety Relief Valve Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
KINGSTON. KNG Series Product Catalog. Ph: Toll:
KEst.1908 KINGSTON KNG Product Catalog Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050 Ph: 310.326.8287 Toll: 800.210.2525 Email: sales@kingstonvalves.com Kingston Safety
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
R627 High Flow Gas Regulator with Internal Relief
High Flow Gas Regulator with Internal Relief The Relieving Regulator has an internal relief valve that provides protection against over pressurization. As output pressure builds up above the start-to-discharge
Type 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com
Type 441 Flanged Safety Relief Valves CATALOG The-Safety-Valve.com General Information LESER India Safety Relief Valves The safety valve Type 441 represents High capacity related to the safety valve size
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service.
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service. Pressure and Temperature Limits Models 912, 913, 918, 919 Steam 3 to 250
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
SV418 Series Bronze Safety Valves ASME Section VIII - NB Certified for Air, Gas, Steam, and Liquid
Safety SV418 Series Bronze Safety Description Spirax Sarco's SV418 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety
Mallard Control Control Valves
Control Valves Excellence In Flow Control Mallard Model 5100 Freezeless Control (Dump) Valve Features Compact valve size Stainless steel trim Threaded process connections NACE MR0175 compliance option
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (open yoke) and Model 5450 (closecoupled) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry.
Compact. performance. Threaded Safety Relief Valves. Series 437 Type Series 459 Type CATALOG.
Compact performance Threaded Safety Relief Valves Series 437 Type 437 438 439 Series 459 Type 459 46 CATALOG The Safety Valve Series 459 Packed lever H4 Series 459 Balanced bellows design Series 459 Cap
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
, Inc. F80 Series. Enhanced Performance Conventional-Style Safety Valves SNAP-ACTING PERFORMANCE REPEATABLE, BUBBLE-TIGHT, SOFT-SEAT DESIGN
, Inc. F80 Series Enhanced Performance Conventional-Style Safety Valves SNAP-ACTING PERFORMANCE REPEATABLE, BUBBLE-TIGHT, SOFT-SEAT DESIGN ADJUSTABLE BLOWDOWN 15 TO 10,313 PSIG -423ºF TO +525ºF VARIETY
R627 High Flow Gas Regulator with Internal Relief
High Flow Gas Regulator with Internal Relief The Relieving Regulator has an internal relief valve that provides protection against over pressurization. As output pressure builds up above the start-to-discharge
Capacity Charts. Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service
Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service About Reyco Valve Division The Reyco line of direct spring acting pressure relief valves utilizes sound engineering principles
SAFETY VALVES. Series 560 & Aquatrol Safety/Relief Valves SERIES. ASME Section I & VIII - NB Certified for Air, Gas and Steam
SAFETY VALVES ASME Section I & VIII - NB Certified for Air, Gas and Steam SIZES FROM 1/2 TO 2 1/2 NB RATED TO 250# TEMPERATURES TO 406 O Aquatrol s Series / valve line is a high capacity safety valve used
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (Figure ) and Model 5450 (Figure 2) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These
Kingston Safety Relief Valves
Kingston Safety Relief Valves ASME Section VIII - NB Certified for Liquid, Air/Gas and Steam The safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage.
394C. Series 6400/6600. Safety Valves for Power Boiler Service
394C Series 6400/6600 Safety Valves for Power Boiler Service Series 6400/6600 Designed with the user in mind, Series 6400 and 6600 safety valves represent the most advanced technology in valves designed
Anderson Greenwood Series 5100 Pilot Operated Pressure Relief Valves
ANDERSON GREENWOOD Series 5100 Modulating Safety Relief Valve Anderson Greenwood has developed the revolutionary Series 5100 specifically to serve Economizer applications requiring pressure relief under
ASME Section I and VIII - NB Certified for Air/Gas and Steam. Series 560. Series 570. Series Stainless steel whetted trimming.
SAFETY VALVES Safety Valves SIZES FROM 1/2 TO 2 1/2 RATED TO 300 PSI TEMPERATURES TO 450 F ASME Section I and VIII - NB Certified for Air/Gas and Steam Aquatrol s Series / valve line is a high capacity
Suction Diffusers. Applications PROTECTION PUMP. Pressures to 790 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZE RANGES RATINGS
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas Suction Diffusers Pressures to 790 PSIG Temperatures to 800ºF FEATURES Filtration
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
Installation Operation and Maintenance Instructions Model Contents
Contents 1.0 General 1.1 Model Number........................... 2 1.2 Specifications............................ 2 1.3 Dimensions.............................. 3 Repair Kit Materials & Part Numbers........
Available in aluminum (type 356), carbon steel, stainless steel and other materials.
Sizes through 1 Pressure settings 1 oz/in to 15 PSIG Available in aluminum (type 56), carbon steel, stainless steel and other materials. PRESSURE RELIEF VALVE MODEL 00A EMERGENCY RELIEF VALVE Model 00A
3900 Pilot Operated Relief Valve
00 Pilot Operated Relief Valve Consolidated offers a unique pilot valve design that combines top performance, capabilities and features within an economical, modular assembly. Consolidated has accomplished
Reyco Series RL14, RL40, & RL41. Direct Spring Acting Safety Relief Valves for Gas, Liquid, and Steam Service
Reyco Series RL14, RL40, & RL41 Direct Spring Acting Safety Relief Valves for Gas, Liquid, and Steam Service Reyco Series RL Direct Spring Acting Safety Relief Valves for Gas, Liquid, and Steam Service
CRN. Series 560/570 Safety Valves. 12 Aquatrol Safety Relief Valves
Series 560/570 Safety Valves Our 560 / 570 valve line is a high capacity safety valve used for boilers, piping lines and vessel protection. Designed and engineered for heavy-duty industrial use. ASME and
KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW
KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW ISSUED NOVEMBER 2012 KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP,
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated reducing regulators (Figure 1) are for low and high systems. These regulators can be used with natural gas, air, or a
Pressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
Table of Contents. Introduction. Description. Greater Total System Efficiency. Improved Design. Easy Installation and Maintenance
Features & Benefits Table of Contents Features & Benefits................................................................ 13900.1 Scope of Design...................................................................
SAFETY relief VALVE SERIES # 006 DESIGN FEATURES HARSHAD ENGINEERING WORKS HARSHAD ENGINEERING WORKS TECHNICAL DATA : ISO 9001 CERTIFIED COMPANY
PROVIDES HIGH QUALITY OVERPRESSURE PROTECTION FOR AIR, GAS, LIQUID & STEAM IN SINGLE STANDARDIZED DESIGN SAFETY relief VALVE DESIGN FEATURES SAFETY VALVE MANUFACTURED IN ACCORDANCE WITH REQUIREMENT OF
Safety and Relief Valves Product Overview
Safety and Relief Valves Product Overview Kunkle Valve is a leading supplier of Safety and Relief Valve Products for industrial and commercial applications, such as steam boilers, air, or non-hazardous
V A L V E S & M E A S U R E M E N T. TOM WHEATLEY Piston Check Valves TOM WHEATLEY
TM TOM WHEATLEY Piston Check Valves TABLE OF CONTENTS PISTON CHECK VALVE Features 1 Installation & Operation 2 How to Order 2 Assembly & Disassembly 3 Dimensions Raised Face Flanged End 4 Dimensions Ring
Cast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
CROSBY J-SERIES DIRECT SPRING PRESSURE RELIEF VALVES
J-Series valves provide high quality and dependable overpressure protection for air, gas, steam, vapor, liquid and two-phase applications in one simple design FEATURES ASME/NB certified capacities for
Multi-Port Gauge Valves M5 and M51
Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration
VALVES & MEASUREMENT. TOM WHEATLEY Piston Check Valves TOM WHEATLEY
TOM WHEATLEY Piston Check Valves TOM WHEATLEY 2 TOM WHEATLEY TABLE OF CONTENTS TOM WHEATLEY Piston Check Valves Introduction... 4 Features... 5 How to Order... 6 Dimensions... 7 Materials of Construction...
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
P630 High Flow Gas Regulator
High Flow Gas Regulator Stainless Steel Internals are Standard Steel Units comply with NACE MR0175 Durable Powder Coated Exterior Wide of Flow Capacities The is a spring loaded, direct-operated regulator
Type 526 IC CATALOG. Flanged Safety Relief Valves API Series. The-Safety-Valve.com
Type 526 IC Flanged Safety Relief Valves API Series CATALOG The-Safety-Valve.com General Information Overview API safety valves (LESER Type 526) are flanged safety valves that meet all the requirements
SERIES. CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) Description
CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) CR Description The Generant Series CR Cryogenic Regulator provides high flow during Cryogenic Vessel Pressure Build function
WKM 320F. Flanged floating ball valves
WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5
CROSBY STYLE JB PRESSURE RELIEF VALVE
A large orifice pressure relief valve engineered to provide high quality, dependable overpressure protection for air, gas, vapor and steam applications FEATURES Ten size product range is the broadest available.
High CATALOG. Efficiency. Pilot Operated Safety Valves Series 810 Pop Action Series 820 Modulate Action. The-Safety-Valve.com
High Efficiency Pilot Operated Safety Valves Series 10 Pop Action Series 20 Modulate Action CATALOG The-Safety-Valve.com Valve finder How to find the right product group High operating to set pressure
Model 380/381 Control Valves
Features High Quality Construction Dyna-Flo uses only materials that have been proven to provide superior, trouble free performance. All materials comply with ASME and ASTM specifications. Versatility
Product overview. Technical data
VALVES & CONTROLS ANDERSON GREENWOOD BLANKETING SYSTEMS The Complete Blanketing and Safety Valve System! Product overview Pad Valves Anderson Greenwood is a world leader in tank protection and blanketing.
Table of Contents Scope of Design
Inhouse Review Table of Contents Table of Contents...........................................................1900.1 Introduction...............................................................1900.2 Overview...............................................................1900.3
TOM WHEATLEY Piston Check Valves VALVES & MEASUREMENT
TOM WHEATLEY Piston Check Valves VALVES & MEASUREMENT Table of Contents TOM WHEATLEY PISTON CHECK VALVES Features... 1 How to Order... 2 Dimensions... 3 Materials of Construction... 4 Pressure-loss Curves
Pilot-Operated Safety Relief Valves
NUFLO Pilot-Operated Safety Relief Valves Series H In the mid 1940s, a new relief valve actuated with a pilot rather than a spring set a new standard for pressure control. The valve, manufactured over
Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil
Kunkle Safety and Relief Products Models 6252 and 6254
ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified. PED Certified for Non-Hazardous Gas. Features Heavy
494C. Pilot Operated Pressure Relief Valves. Series Pilot Operated Pressure Relief Valves. Farris Engineering Pressure Relief Valves
Series 3800 Pilot Operated Pressure Relief Valves 494C Pilot Operated Pressure Relief Valves Farris Engineering Pressure Relief Valves Piloting the Way to Precision Control The innovative, integrally cast,
P3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD
P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and
CRN. Series 740 Safety Valves. Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
SAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves
SAMPLE CYLINDERS T H E S O L U T I O N F O R G A S S A M P L E S T O R A G E Sample Cylinders & Accessories ISO 9001:2008 Certified Quality System Spun End Cylinders Ultra-Seal Constant Pressure Cylinders
Series Maintenance Manual. Technical Manual 197T R2
Series 2700 Maintenance Manual Technical Manual 197T R2 Flanged Female NPT Inlet Sanitary Inlet Threaded Table of Contents 1. Introduction Numbering System...3 Standard Bill of Materials...4 Accessories...5
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
KUNKLE Safety and Relief ValVe PRoductS overview
KUNKLE Safety and Relief ValVe PRoductS overview april 2015 KUNKLE Safety and Relief ValVe PRoductS overview Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP, 200A and
TOSACA. Catalogue
Catalogue 2016-1 INDEX / INDICE 1216 1400 EN/DIN flanges 1216 pag. 2 1216 HP pag. 3 1400 pag. 6 1216 C pag. 4 1216 B pag. 5 1400 LP pag. 8 1415 ASME flanges Accesories 1415 pag. 9 1415 LP pag. 11 pag.
Kunkle Safety and Relief Products
ASME Section I and VIII, Steam, V and UV, ASME Section VIII, Air/Gas UV National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, Steam, HV National Board Certified. PED Certified for
3900 MPV Flanged Valves comply with:
Agency Review 00 MPV Features / Scope of Design Table of Contents Features / Scope of Design........................................................00.1 Main Valve s............................................................00.7
Pressure Relief Valves MPV Series. Consolidated Pilot Operated Safety Relief Valve
Pressure Relief Valves 2900 MPV Series Consolidated Pilot Operated Safety Relief Valve Table of Contents Conversion Table... 2900.2 Features & Benefits... 2900.3 Scope of Design... 2900.4 Main Valve Materials...
General Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.
DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com
Introduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526. Specification Data CY /10
Putting You In Control Specification ata CY525-526 06/10 Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and ifferential Pressure Control Pressure Regulators
13900 Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 13900 Series Pilot-Operated Safety Relief Valve Designed specifically for high capacity steam applications, this series of valves contributes
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high pressure systems. These regulators can be used with natural
BIRKETT SAFESET SERIES PILOT OPERATED SAFETY RELIEF VALVES
Pop action and modulating pilot operated safety valves with a unique full nozzle design and dimensions to API 526 FEATURES GENERAL APPLICATION Safeset valves are self-contained pilot operated safety relief
Spring-assisted, Non-slam, Axial Flow, Silent Check Valves
DFT s family of In-Line Check Valves are available in a variety of designs: Basic-Check Restrictor Check SCV SCV-R Vacuum Breaker DLC BNCTM Excalibur GLC GLC -Cast Iron PDC DSV ALC FBC WLC WLC -Cast Iron
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
CACTUS FLOW PRODUCTS
ADJUSTABLE CHOKES POSITIVE CHOKES CACTUS FLOW PRODUCTS s Adjustable Choke assemblies and Long Nose Heater Choke assemblies are furnished with Hardened Alloy Steel Stems and Seats as Standard Trim for Regular
Model 1415 TOSACA TECHNICAL DATA SHEET. Construction and materials. Technical information
Model 1415 TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation API RP 520 Connections Flanged ASME/ANSI B16.5 Design / Size API STD 526, ASME Section VIII Rating 150#/300#
BOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]
![Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]](/thumbs/76/73640006.jpg "Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]")
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified.
2900 MPV Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 2900 MPV Series Pilot-Operated Safety Relief Valve A unique design that combines top performance, capabilities and features within an
TECHNICAL BULLETIN. Valbart TM Through conduit slab gate valve. Experience in Motion FCD VBENTB A4 - (9/16)
Valbart TM Through conduit slab gate valve TECHNICAL BULLETIN FCD VBENTB1013-01-A4 - (9/16) Experience in Motion Valbart Through Conduit Slab Gate Valve The Valbart TCSGV is a fabricated body through conduit