Westinghouse Electric Corporation large Motor Division Buffalo, New York, U.S.A
|
|
- Alaina Garrison
- 6 years ago
- Views:
Transcription
1 (I June, 7 large Motor Division Frames 83 to 1 Frames 83 to 11 Shunt. Frames 83 and 3 with Series Coil 370 FWEA Page 1 See Page 2 for Frames to 1 with Series Coil Standard right hand mounting shown. Position of conduit box and equalizer plate reversed for left hand mounting. M N O T- Td.0 -- mig" holes H C --'-+I'O no supporl required under magnel end of base maqnet travel indicalar equalizer plale Dimensions. Inches Not to be used for construction purposes unless dimensions are approved. 83 S 3)1. 6J!. 1 3)1. 2J!. 2J! )(, 11. J! J!. 21 J!. 7J!. J!. J! J! J! ) ,6 3 n;'6 3 "Ae 11 )I.,. ) * 1 ';'. 1 12'. 6' Ae 1,. 7,. 11 % 1 6 )1. 11> 7J!. TIj,6 1 20)1. % 6 1'l1. 0)1. 1 'II. Reproduced from Drawing sub 1. Name Order No Machine No... 7)1. Style or.0. No Frame... Hp... Volts... Rpm... Winding.... A8 AG - AD --- y nole: conduil box ±t±:(k-t omilled on, frames Ihru 11. broke wilh series coil nole; For dis lance from molar cenlerline broke cenlerllne. add L dim. of molar to CE dim. of brake. Excepl for MC-GOO mill molars. see page for CK dimension Y.. 7J!. lj!. 1S)I. 1 % 7 )I S% J!. 2J!. 2 lslia 1.%, 9)(, J!. % 22) % 8AG 36";' )1. 1 3J!. '71. % 2 J!. 6 60% 0 lj!. 20'll. 70;.. 9J!. 1J! J!. /,6 7';'. 3* 1l1. Without Alone 0 2 2J!. 3* 0 )I. 11';', '%, * '. /,6 2';', )I. 3 ";' > J!. % 2 J! J!. 1''Ii, 811.1,6 17> 90 : Style or.0. No... G.O. No..... Frame Date..., Max. Torque: Approved by:... Series Wound Date... % Hr Hr... Int... Cont...
2 370 FWEA Page 2 Frames 83 to 1 Frames and 1 with Series Coil Dimensions. Inches Not to be used for construction purposes unless dimensions are approved. MC-GOO, 800 Mill Motors Hand Release Beoring M09net TrOVel Indicator Equalizer Plale Series Lead Frame CH CL '''h.. 0/.. 6 "/n 8 "In 7 ii. 11 "In 9'",1,. 1,,/'" Centerline and Dimensions per AISE Standard 11. Left Hand Mounted Brakes. Reproduced from Drawing sub 1 Me Motor Buffalo. New York. U.S.A. 120 T-M - MC Brake Motor , ,803 60,80 606, , ,803 60,80 606, , ,803 60,80 606, ,812 61,81 606, ,808 6,8 612,812 61,81 6, ,8 612,812 61,81 6,8 618, ,812 61,81 6,8 618, ,8 618, Mounting Dimensions Dimensions -D----C --=O--- E F Z CK /. /. 3l!. 3l!. /.. 6l!. 6l!. 60/.. 6l!. 0/.. 60/. 8l!. 8l!. 80/.. 80/. 80/. 80/. 80/.. 11 % 11 % 11 % !. 7l!. 7l!. 7l!. 71> 80/. 9Y. 9l!. 90/. 1 % % 0/. 0/ i1. l!. l!. l!. l!. l!. l!. 60/ l!. 6 60/ / :. : )(. % % 1i i1. 9i1. 8')(. 90/.. 90/. 1!. l! / i1. 1 0/ ' l! /.. 180/. 18l!. % 0/. 1 % 20% 221' /.. 27')(. % 33 2l!. 260/. 28l! l! /. 360/. 0% 360/. 381' 00/. 8 ii. Style Number CM 6',1,. 80/.. 8 1A12H02 1A12H09 1A12H09 39A96H3 3A98H 3A98H03 3A98H03 82D221 H33 82D221 H3 29B033H03 29B033H03 29B033H02 29B033HOl 82D180H1 29B033H 29B033H 26B70H20 26B760H 2B7660HOl 2B70H08 2B7660H07 2B7660H03 8D89H18 68D89H 39A91H03 39A91H0 68D89H20 39A91H06 Future 39A917H12 39A917H 39A917H03 39A917H0 Future Future Future 7D688H06 7D688H07 7D688H02 7D688H03 7D688H0
3 c June, 7 Frames 3 and 63/ Single Magnet Type Single Magnet Frames 3 and 63 See Dimensions Sheet 370, pages 1 and 2, for Frames 83 to 1/ Type Standard Left Hand Mounting Shown K I'O C ---o!<o'o---o t I stop hand release bushing moin spring L I----'< H ----oo; 'J" dia 2 mig holes Dimensions, Inches Not to be used for construction purposes unless dimensions are approved. Frameeel Width cif--c-- 0 Oia. A Face B % Reproduced from Drawing 6 C 2. sub 1 Name... Order No..... Machine No E Style or S.O. No.... Frame..... Hp.... Volts... Rpm...,. Winding... F (j ---- H --- Without FWEA Page 3 I!t. of broke nole: Dislance from centerline of molar centerline of broke. Add L dim from molar outline plus CE dim of broke. Of mtr, Ldim I-- J ---- K --- L M N-- o-dia:p Alone 6 Style or S.O. No Frame.... Max. Torque: Series Wound % Hr... 1 Hr Int.... Cont ]1. 91 y.:, I 'O/u, ]1.. : G.O. No.... Date.... Approved by: Date
4 June, 7 Drip-proof Cover, Frames 83 to 11 For Brake Dimensions, See 370, Pages 1 and 2 UN" radius for L.H. assembly only left hand assembly Drip-proof Cover Frames 83 to 11 Dimensions. Inches Not to be used for construction purposes unless dimensions are approved. Frame A B C D E /1& 7'/" 10/ '/', "/', % 1> )i, 6 % 2 12'1\. 211> 8 36";', > 11 '3/'6 31'1,. 180/" % 33"/,. /. 9'1" Frame R S T U 83 7'/" 2)i, ly /,t; 31{, 2 % "/,. % 6 1 % 8 '0/,. 6Y.. % 11 HI{. 8 Reproduced from Drawing 61-C-1, sub 7 F G H J K L 1 % 7 7 % 1> 9)i, fi 1 % 71> 1 11 % 11 % 1 121> )i, V W X Y Z AB 2 7Y.. 1o/i6 '1,As 91{, 2Y, '/" 11 % % '0/,6 2''In 111 /, /1,. 1 "f,e / ", 1"1, '1,. 0/ /. 2''In /.& 370 FWEA Page right hand assembly "M" radius for R.H. assembly only M N 0 P Q 11> 21> 1 21> Y. 3:-;' 21> 1> 1> AC AD AE AF AG 3 % Y. 1 "h. 11 % 6Y, 11{. 1 7'/" '1,. : Name Style or S.O. No... Style or S.O. No... G.O. No Order No..., Frame... Hp... Frame... Date... Machine No... Volts... Rpm... Max. Torque: Approved by:... Winding.... Series Wound Date... % Hr... 1 Hr... Int... Cont....,
5 (I June, 7 Drip-proof - Splash proof Covers Frames 3 to 83 Drip-proof - Splashproof Covers, Frames 3 to 83 For Brake Dimensions, see 370, Pages 1 and 2 See Page 8 for Drip-proof - Splash proof Covers for Frames 3 to 1 Frames 3 and 63 -L.., Q ' 't 01 brake wh 1 AF radius 01 shaf1 o n,"9_ t. "A" din 'I."a" face Lljlj!;J: -;-' haft / - "CF"rodlus. 1 11s R ig/1 ho n d l" \ I I,... L. /01 o peni n g 0 63 I V - -1-:, f rt.::" - -, J. M--""==== Frome 83 view cover --'r t view S cover r frame 83 Dimensions, Inches Not to be used for construction purposes unless dimensions are approved. Frame Width of C D E F G Dia. A Face B 3 3 Ii. 0/,. 3,\\, i. 11 % i Frame T-T V W X Y Z AA 3 'A 'li l' 'A6 % Frame CE CF CG CH CJ CK 3 7/,. 8'V,. '0/, /'6 1* % * Reproduced from Drawing , sub 1. Name... Order No Machine No... Style or S.D. No... Frame Hp"..... Volts... Rpm... Winding FWEA Page 7 Brake Mill Ctr. Line Frame Motor of Motor Frame to Ctr. Line of Brake 83 MC (j) For all combinations, other than millmotors and brake. use 'CE' dimension of brake plus 'L' dimension from standard motor outline. H J K L M N 0 P a s 1Ao 1'V,& 11Y Ii. 9l' 7A. 17* 1'Vl& Ii. 11 % % 2 2l' % 1 7 1V" AB AE AF AJ Weight, Lbs Brake Without Enclosure Alone Alone /, : Style or S.D. No.... G.O. No... Frame... Date Max. Torque: Approved by: Series Wound Date Hr... 1 Hr... Int... Cont
6 . 370 FWEA Page 8 Drip-proof - Splash proof Covers, Frames 3 to 1 Brake Dimensions, see 370, Pages 1 and 2 See Page 7 for Drip-proof - Splashproof Covers for Frames 3 to 83 o Drip-proof - Splash proof Covers Frames 3 to 1!: ; n Ybe A8 tv interchanged AB:lE depending upan 2" 't...l -hand gn ps for frame assembly of broke H M size A 8 and 11 and 1 11,, to molor -on 1 It of brake wheel Y.. i"\ frame size U,2 interchange. t complele sides senes lead. on for LH orrh frame sizes to 11 Wllh ser!es assembl Y. i coils are symetncal about 'lof brake S for broke coil and Conduit Bo. inspeclion is om r!e d " remove bolls c r AD. 'AH"dia hole in Iii r. :t ;= == 9F;; f :a r =s====!:,iji : w i \.tt ---'-M ----t>j T-T dia mig holes U 'AC",ad,"s opening fo r c U stomer' S leads Dimensions, Inches Not to be used for construction purposes unless dimensions are approved. Frame Width C D E F No, Dia. of Face A B * ),> 20, ).> 6 6* ),> ),> '/" ),> Frame S T-T U V W X 3 * "/'6 2o/ss 21Yt6 20'/', 6 1;'6 11 % ),> 6 2 1Yu, 11 a 11 % '/,. ),> 6),> 11 31'1,. /" ),> 8 1,9A6 2 6/ 9),> Frame AL AM Weight, Lbs. No, Brake Without Wheei sur e Alone Alone '1" ).> Reproduced from Drawing , sub 1, 9 G H J K L ).> 2),> ),> ),> % 1 % 8uA6 1* 1 7/' ).> 6 9),> Y Z AA AB AC 1 11J1 & 2 % %6 12 2).> % 1 %& % 3),> 1 1 9/'6 1"",k As 3),> 1 9A. ).> 'A. AH CE 1 3/3.2: 1 :Y32 7 "I... 7" 91 '%2 Name,...,......,... Style or S,O. No..,.,,.....,., Style or S.O, No..., , Order,, Frame,...,,.. Hp Frame,,......,....,.,...., Machine No....,, , Volts,,...,..,. Rpm...,,... Max. Torque: Winding...,,.,.,.,,... Series Wound Yo Hr.....,1 Hr...,..... M /" 3 91o/t& 67),> AD 61 7}1; 91f 8),> Int.,,...,,Cont , e Brake Mill Ctr. Line Frame Motor of Motor No. Frame to Ctr. Line of Brake 3 MC MC-60 1 MC MC MC 6 2* 8 MC ),> MC MC 6 MC * <D For all combinations, other than millmotors and brake. use 'CE' dimension of brake plus "L" dimension from standard motor outline, N 0 P Q R 3 1 % 1'/" 3 "'I... 'I '/,. 11 ).> 1 22' % 1 28'/" 6 1).> }I; 20% 1 AE AF AG AJ AK 1),> 2),> 1 '% " /'6 2'/', 6),> '/,. 71/,6 ).> 83/'1 loy, : G.O. No.....,......, , ' Date..." " ' "., , Approved by:...,,.....,.. Date......, , :'i' ro c. " c if) :c.
7 CI June, 7 Mailed to: E, 0, C/1769/D S Watertight - Dusttight Covers. Frames 83 to 6 For Brake Dimensions, see 370, Pages 1 and 2 Left hand assembly of watertight - dusttight covers Right hand assembly of watertight - dusttight covers Watertight, Dusttight Covers Frames 83 to Dimensions, Inches Not to be used for construction purposes unless dimensions are approved Frame Width of C 0 E Dia A Face B _ F 370 FWEA Page 9 T -dio mig holes D G H J K L \ \1. 17\1. * 3 3* )1, )1,,. 3 )1, 11 * * 1 2)1, )1, lae '1A.. 1 Ae ";'. 207;' /,& 99A6 11,.. % '0/,8 1 0 ";'. 2 6HAG 9'''A, 11,. 7 t3ae )I, '7' % 1 1 v'e % /' Reproduced from Drawing , sub Name.... Order No.... Machine No.... Style or S.O. No.... Frame... Hp.... Volts... Rpm.... Winding : Style or S.O. No.... G.O. No.... Frame.... Date.... Max. Torque: Approved by:.... Series Wound Date.... % Hr... 1 Hr... Int... Cont
8 8 June, 7 With Open-Type Hand Release Lever. Frames 83 to 6 M N Q H Open-Type Hand Release Lever Frames 83 to C ---1Il\ ,f---f-llol L retainer cli p It. of broke I wheel E-- K.... I-- F -+l+-g mognet adjusting screw + + AK s 370 F WEA Page 11 note: hand release is applied by lifting handle assembly and clearing retainer clip then pull upwards until shoes release wheel main compression spring magnet travel indicator brackets Dimensions, Inches Not to be used for construction purposes unless dimensions are approved. Frame Dia A 8 Width of FaCe B 3Y. C 6'6 11 '6 D 1 17'A, 209/,.. 22'/,. E 3Y. F 3 '6 G 2' _-.. _---.. _-_ _-_... Frame T U V W X Y Z AB 83 'Yt& 7,.,. 3 Y. 3 HAs,. /,6- lly.. % Y.. % 1 %8 1 12Y.. 6Y.. % Reproduced from Drawing , sub Name...,... Order No..., Machine No...,..,,.... For Motor Style or S.O. No Frame... Hp Volts Rpm... Winding H J K lyz 2 stop pin L AG 18Y. 22Y. 26Y. % AS M 1Yz 1 2 lifting lug tn.p.t. 2-holes note; for centerline distance from motor centerline to broke centerline odd {L I dimension of motor to(ce)dimension of broke N Y. o % 1 p Q 7 1 AC AD AF AG CE AH AK Weight, Lbs Brake Without s "A. 2 Alone 1/, » 811A6 0 2» l"a. '%2-20% )1, "A. 29; ! : Style or S.O, No...,, G.O.,.., Frame Date..., Max. Torque: Approved by: Series Wound Date Y.. Hr Hr... Int... Cont
TM ETRS-TM35FIN-ETRS89 WTG
Noise calculation model: ISO 9613-2 General Wind speed: 8,0 m/s Ground attenuation: General, Ground factor: 0,4 Meteorological coefficient, C0: 0,0 db Type of demand in calculation: 1: WTG noise is compared
More informationLIFTING CHARTS - Crawler Cranes AMERICAN MODEL TON CAPACITY
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL 7260-100 TON CAPACITY 7260 1 LIFT RATINGS with 59S Tubular Chord Hammerhead and "S-S" Counterweight (49,700 lbs.) (15,150 kg.) (Feet) Feet (Pounds) Feet From
More informationGuide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
More informationAUTUMN 2013 TIME SCHEDULE
AUTUMN 2013 TIME SCHEDULE Instructor 110 A LC 3 M W F 830-920 195 L EEB 105 CRAIG 11903 11904 AA QZ T 930-1020 25 L MUS 219 11905 # AB QZ T 1030-1120 25 L DEN 213 11906 AC QZ T 1230-120 25 L SMI 107 11907
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More information~... se_rv_ic_e M_A_NU_AL_2_44_4._z1,~
WABCO... se_rv_ic_e M_A_NU_AL_2_44_4._z1, DN-11 DC NEUTRAL RELAYS PARTS LIST This service manual provides parts lists for 4-, 6-, 8-, and IO-point DN-11 DC Neutral Relays. Included in this Parts List is
More information3RG4 BERO Inductive Proximity Switches
3RG40 11 3RG40 11 0AA00 10/14 3RG40 11 0AB00 10/14 3RG40 11 0AF00 10/13 3RG40 11 0AF05 10/18 3RG40 11 0AF33 10/17 3RG40 11 0AG00 10/13 3RG40 11 0AG05 10/18 3RG40 11 0AG33 10/17 3RG40 11 0CC00 10/14 3RG40
More informationPartner for Change : Appendix A
11/8/217 Partner for Change - 218: Appendix A Practice Greenhealth Awards Probo.CI CEC_HOSPITAL no.35321 Partner for Change - 218: Appendix A Introduction Completion of Appendix A mandatory. Please indicate
More informationGROUP SIX Mficoticari Emoteq Division MF Series Torque Motors - Thin Ring Design - Direct Drive eliminates backlash - Extremely low cogging torque Con
GRUP SIX Mficoticari Emoteq Division MF Series Torque Motors - Thin Ring Design - Direct Drive eliminates backlash - Extremely low cogging torque Contact Us! Email Purchase Source: GRUP SIX () Te,4,2t
More informationTHD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs
CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and
More informationParts List, Wiring Diagrams
Parts List, Wiring Diagrams PAS180-300 SERIES PACKAGE GAS ELECTRIC UNITS TABLE OF CONTENTS PARTS LIST----------- 2-16 PARTS DRAWING - - - - - 17-28 WIRING DIAGRAMS - - - 29-52 Printed in U.S.A. 5/22/08
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationRA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
More informationCompact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
More informationCombined pump and gripper Medium
VGS 3010 H D W Dimension and connection W D H Feed pressure Vacuum Exhaust/blow mm mm mm 1 Housing VGS3010 23 30 Ø6 mm, 3x G1/8", M5 2 COAX cartridge 2:1 No COAX cartridge 65 2:2 COAX cartridge 2-stage
More informationPRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationCAT. No. KS-570E. SCS Single Action Push Type. SCD Double Action Type. super. cylinder FUJIKURA RUBBER LTD.
CAT. No. KS-570E SC SCS Single Action Push Type SCD Double Action Type super cylinder FUJIKURA RUBBER LTD. General Description of BF Cylinders FC Series : Single/Double Action Standard Cylinders SC Series
More informationG3 UNIVERSAL GRIP CONFIGURATION GUIDE
G3 UNIVERSAL GRIP CONFIGURATION GUIDE www.ottoexcellence.com Industrial Grips for Demanding Applications OTTO serves agriculture, construction, off-highway, material handling and specialized industrial
More informationTamil Nadu Public Service Commission
ASSISTANT CONSERVATOR OF FORESTS DOE :02.12.2014 TO 09.12.2014 _ Subjcct:AGRICULTURE ~ Codc:ACFAG ~........ B X 41 AX 81 DX 121 o A 161 c l< 2 cy 42 CY' 82 Dy 122 13 x 162 B ~ J ox 4J c \ 83 D..( 123 c
More informationIssue/Rev. 0.3 (2/04) Bulletin P
Form No. P0906.03 E-Type Transmitter Parts List Issue/Rev. 0.3 (2/04) Bulletin P0906.03 (Previous Design) Switch and Network Assembly The Switch and Network Assembly is no longer available. To replace
More informationVacuum Automation 2.1. The future depends on good product choices
Vacuum Automation 2.1 The future depends on good product choices Combined pump and gripper 432 433 Combined pump and gripper Introduction...434 Small...436 Medium...438 Large...452 Accessories...455 434
More informationQA/8000. Guide blocks with plain bearings/ roller bearings Ø 32 to 100 mm
Guide blocks with plain bearings/ roller bearings Ø 3 to mm Conorms to ISO 643, VDMA 46 and NFE 49 3 Ensures protection against external rotary and bending orces Guide rods run through bearings protected
More informationInstallation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual Flat Belt Center Drive LPZ Conveyors Table of Contents Warnings General Safety........................... 2 Introduction.......................................
More informationROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS. Automotive Seals VW BARNWELL THE SEAL OF APPROVAL
ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS Automotive Seals VW BARNWELL THE SEAL OF APPROVAL QUALITY AND SERVICE GUARANTEED Total Sealing Solutions Founded in 1972, M
More informationHeavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
More informationInstallation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 00 Series Center Drive Conveyors Table of Contents Warnings General Safety........................... Introduction....................................... Product
More informationAIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
More informationAPPENDIX A Instruction Set. Op Code. T states Flags Main Effects. Instructions
APPENDIX A 8085 Instruction Set Instructions ACI byte CE 7 ALL A A + CY + byte ADC A 8F 4 ALL A A + A + CY ADC B 88 4 ALL A A + B + CY ADC C 89 4 ALL A A + C + CY ADC D 8A 4 ALL A A + D + CY ADC E 8B 4
More informationPneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
More information2200 Series Center Drive Conveyors
2200 Series Center Drive Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975 Cottonwood Ave. TEL: 1-800-397-8664 TEL: 262-367-7600 Hartland,
More informationRA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm
Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and
More informationPRA/182000, PRA/182000/M
Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
More informationINSTRUMENT PANEL CLUSTERS
INSTRUMENT PANEL CLUSTERS NOT BUYING AT THIS TIME REVISED ##### PART # MAKE APPLICATION 6/18/2018 PRICE 56045618 CHRY IPC 40.00 56045679 CHRY IPC 40.00 56051103 CHRY IPC 40.00 56049833 AC,AD CHRY IPC 40.00
More informationREV: 000. Super Seca Flash Cure Units
REV: 000 Super Seca Flash Cure Units Table Of Contents Introduction 2 Standard Operating Guide 2 Features & Specs 2 External Layout 4-15 Internal Layout 16-24 Plug Guide 25 Wiring Diagrams 26-28 F.A.Q.
More informationFlat Belt Center Drive LPZ Conveyors
Flat Belt Center Drive LPZ Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975 Cottonwood Ave. TEL: 1-800-397-8664 TEL: 262-367-7600 Hartland,
More informationItem Code Description Quantity 3NA LV HRC FUSE LINK S00 80A 690AC 250DC 30 3NA3832 LV HRC FUSE LINK GL/GG S00 125A 500VAC 250VDC 0
Controlgear Products +27 () 11 97 116 sales@controlgear.co.za Siemens stock items on hand as at Mon, 3/4/218, 14:4 GMT+2 3NA3824-6 LV HRC FUSE LINK S 8A 69AC 25DC 3 3NA3832 LV HRC FUSE LINK GL/GG S 125A
More informationMOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER Date:
MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER 15-24 Date: 11-19-2015 SUBJECT: MODELS/ S/N AFFECTED: To ADVISE MOONEY OWNERS/OPERATORS of the LYCOMING Service Instruction
More information400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically
More informationCYLINDERS. Moving more than air
CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders
More informationTerminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals
Terminal Blocks 2013 Product Catalog Terminal Block Supplement Introduction 8WH6 ipo Plug-In Terminals 8WH6 ipo Installation Terminals 8WH2 Spring-Loaded Terminals 1 2 3 4 8WH 8WH5 Combination Plug-In
More informationPRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
More informationCUSTOM ADD-ONS FOR ENGLISH UNITS
Spindles Flange Piloted Slot Collet Jacobs Taper Morse Taper See note on next page for location in the Specification Code No. Description A B C AA Flange 2.625 3.619/3.621 5.313 AB Piloted Slot 2.3125
More informationInstallation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 3200 Series Flat Belt LPZ Conveyors Table of Contents Warnings General Safety........................... 2 Introduction....................................... 2
More informationDATE: May 19, 2000 Service Instruction No. 1443E (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved
DATE: May 19, 2000 (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved SUBJECT: MODELS AFFECTED: TIME OF COMPLIANCE: Approved Slick Magnetos on Textron Lycoming Engines See
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationMODELS SA5000AC, SA7000AC, SA9000AC, SA12000AC
OWNER S MANUAL MODELS SA5000AC, SA7000AC, SA9000AC, SA12000AC dead WEIGHT CaPaCITY (LBS.)* WARNING: READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THE STRONGARM ELECTRIC WINCH.
More informationInstallation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 2100 Series Center Drive Conveyors Table of Contents Warnings General Safety........................... 2 Introduction....................................... 2
More information10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
More informationSITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
More informationProduct Information Packet SUM HP,1725RPM,3PH,60HZ,180TY,TENV,FOOTLES
Product Information Packet SUM70504-4 5HP,1725RPM,3PH,60HZ,180TY,TENV,FOOTLES Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationSELECTION LIST REVISION This book contains the following models: Chevy/GMC Dodge Ford
SELECTION LIST ---------- REVISION 0 ---------- This book contains the following models: 1973-2002 Chevy/GMC 1994-2002 Dodge 1980-2002 Ford Form #64135-120102 WESTERN PRODUCTS P.O. BOX 245038 MILWAUKEE,
More informationLPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
More information6-3 [D5A0] WIRING DIAGRAM. 5. Wiring Diagram. 5. Wiring Diagram A: POWER SUPPLY ROUTING SU01-04A
6-3 [D5A0] WIRING DIAGRAM A: POWER SUPPLY ROUTING SU01-04A 12 WIRING DIAGRAM [D5A0] 6-3 SU01-04B 13 6-3 [D5A0] WIRING DIAGRAM No. Load No. Load MB-1 MB-2 MB-3 MB-4 MB-5 MB-6 MB-7 MB-8 MB-9 MB-10 SBF-7
More informationOWNER S MANUAL MODELS SA5000AC, SA7000AC, SA9000AC, SA12000AC ELECTRIC WINCHES WARNING: READ INSTRUCTIONS CAREFULLY BEFORE WINCH RATINGS.
MODEL R OWNER S MANUAL MODELS SA5000AC, SA7000AC, SA9000AC, SA12000AC DEAD WEIGHT CAPACITY (LBS.)* WARNING: READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THE STRONGARM ELECTRIC
More informationMotive Power Dependability From Electro-Motive
Motive Power Dependability From Electro-Motive 2 ... ELECTRO-MOTIVE SD5: 35 HP MAINLINE LOCOMOTIVE Length over coupler pulling faces... 71 '2" Distance between bolster centers. 45'1" Truck-rigid wheel
More informationSELECT 3-BURNER PROPANE BARBECUE Assembly Manual
SELECT 3-BURNER PROPANE BARBECUE Assembly Manual 85-3096-2 (G31221) Propane 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts
More informationCrane Control Class 5010
WB F s and Rectifiers Catalog CONTENTS Descriptions....................................................Page DC Magnetic Drum s General Information................................................. 14 Pricing
More informationElectromechanical Level Control
Electromechanical Level Control Catalog 9034CT9701R2/08 08 Class 9036, 9037, and 9038 and Class 9049 Accessories CONTENTS Description..............................................Page Selection Guide..............................................
More informationSPARE CONNECTORS 2008
SPARE PARTS MANUAL ART.NO.: 3208201 ENGLISH INDEX SPARE CONNECTORS AA-AR SPARE CONNECTORS AS-BK SPARE CONNECTORS BL-BZ SPARE CONNECTORS CA-CP 1x 2x 3x 4x SPARE CONNECTORS CQ-DM SPARE CONNECTORS DN-EL
More informationSERVICE INSTRUCTION. All Certified Lycoming direct drive engines. TIME OF COMPLIANCE: At owner s discretion.
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
More informationParts List, Charging Chart, Wiring Diagrams
Parts List, Charging Chart, Wiring Diagrams PHN5 24-60 SERIES 1 Phase R-410A PACKAGE HEAT PUMP UNITS TABLE OF CONTENTS PARTS LIST 2-5 PARTS DRAWING 6-17 CHARGING CHART 18 WIRING DIAGRAMS 19-21 Printed
More informationPRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane
More informationLimit Switches and Safety
and Safety Introduction Overview 3SE5 23., 3SE5 21. 3SF1 2.4 3SE5 24., 3SF1 244 3SE5 13., 3SE5 11., 3SF1 114 3SE5 12., 3SF1 124 3SE5 16. 3SE5 232, 3SE5 212, 3SF1 2.4 3SE5 132, 3SE5 112, 3SF1 1.4 Position
More informationPRODUCT GUIDE LANDSCAPE LIGHTING. fxl.com. A Hunter Industries Company
PRODUCT GUIDE LANDSCAPE LIGHTING A Hunter Industries Company fxl.com FINISHES Metals Powder coat Standard Powder coat Specialty s AB on copper AB on brass AT on copper AT on brass CU BS SS NP BZ DG WI
More informationP1X Series. Compact Rodless Air Cylinders Contents
Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...
More informationInternational standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)
Gear Pump High Performance Version GP up to 31 cm 3 (1.89 inch 3 ) p max 3 bar ( PSI) Speed from to RPM Technical Features Operating pressure 8 bar, Peak pressure 3 bar High-strength quality aluminum alloys
More informationSeries AM/MM/WM Mill Type Cylinders
ET AH To order this part, call Lifco Hydraulics USA Toll Free at -00-- S S ZE* SS* SW (TYP) FB THRU, () PLACES TE UF WA / EE P* ØE EE P* CD 00 M CW S Series AM/MM/WM Mill Type Cylinders Table of Contents
More informationM/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
More informationSERVICE INSTRUCTION.
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
More informationSERVICE INSTRUCTION. Lycoming engines that meet defined criteria herein. REASON FOR REVISION: Added IO-360-N and IO-390-C engine models
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 www.lycoming.com SERVICE INSTRUCTION
More informationFeatures. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard)
Features Symbol Standard tie rod type hydraulic cylinder Double acting hydraulic cylinder for 70 kgf/cm 2 or 140kgf/cm 2 with bore sizes from 40 to 250. High performance cushion to reduce shock Double
More informationISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
More informationOur policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
More informationSERVICE INSTRUCTION. 652 Oliver Street Williamsport, PA U.S.A. Tel Fax
652 Oliver Street Williamsport, PA. 17701 U.S.A. Tel. 570 323 6181 Fax. 570 327 7101 www.lycoming.com SERVICE INSTRUCTION DATE: March 8, 2012 Service Instruction No. 1098H (Supersedes Service Instruction
More information1980/89 ILLUSTRATION SECTION A70 C LIGHTTRUCK INDEX
1980/89 ILLUSTRATION SECTION A70 C INDEX YEAR 19_ TITLE * 06 TYPE TRANSMISSION - Cont d MODEL SECTION PAGE ILLUS. NO. EXTERNAL_PARTS - ConEd 60/ Steering column - 1980/81 - fixed wheel - 1982/ - fixed
More informationISO Technical details
Cylinders > piston rod cylinders > assembly groups > BP IO 15552 Technical details Operating pressure Cylinder with brake system XBP brake system 3... 6 bar Temperature range -10 C... +50 C Max. stroke
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationXG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
More informationFRONT AXLE PARTS BOOK TH636C TH644C TH842C TH844C
I FRONT AXLE PARTS BOOK TH636C TH6C THC THC I DATE: --05 SPICER CLARK-fnJRTH /60 AXLE 7-9-69 STEERENG CYUNDER DIFFERENTIAL LOCK TEREX HANDLERS 55 N. Superior Ave., Baraga, MI 990 PH: (906) 353-3500; FAX:
More informationc ~-
ABUSE YEAR VCTM PREST ALLEGATO MADE +' ;:o1 ;;o 3: 62 Feale Forusa 1/1/62 n 62 Lyki
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationLYCOMING CYLINDER PRICING
SHIPPING: 2415 EMBARCADERO WAY, PALO ALTO, CA 94303 MAILING: P.O. BOX 50608, PALO ALTO, CA. 94303-0608 Phone: 650-354-1399 Fax: 650-354-1395 LYCOMING CYLINDER PRICING CYLINDER PRICING ENGINE MODEL: O-235
More informationDATE: February 24, 2014 Service Instruction No. 1009AW (Supersedes Service Instruction No. 1009AV) Engineering Aspects are FAA Approved
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258 3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323 6181 (Direct) Facsimile +1 (570) 327 7101 www.lycoming.com SERVICE INSTRUCTION
More informationAutumn Quarter 1999 Class Time Schedule and Teaching Assignments 7/10/99 8:48 PM
120 A LC 5 M T W F 930-1020 288 L BAG 131 MACKLIN AA LB M 1230-220 32 L BAG 133 Liang/Bondzie AB LB M 230-420 32 L BAG 133 Anderson/Lockwood AC LB M 430-620 32 L BAG 133 Lincoln/Babic AD LB T 1230-220
More informationType 500X. Electropneumatic Transducer (I/P, E/P) Installation, Operation and Maintenance Instructions. Ordering Information.
Type 500X Electropneumatic Transducer (I/P, E/P) Installation, Operation and Maintenance Instructions Ordering Information Type 500X I/P Transducers Output Range Part Number Input psi kpa Impedance 500-AA
More informationCD5--- CA4--- CD6---- CB2---- CB4---- PARTS RECOMMENDED FOR NORMAL STOCK
RENEWAL PARTS CA2--- CD5--- CA4--- CD6---- CB2---- CB4---- ' PARTS RECOMMENDED FOR NORMAL STOCK NOTE: The current is identified by the number following the voltage letter in the IC designation. EXAMPLE:
More informationS: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
More informationPRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
More information3VU13, 3VU16 Circuit-Breakers
3VU3, 3VU6 Circuit-Breakers Description The 3VU3, 3VU6 circuit-breakers are compact circuit-breakers for currents up to 80 A which operate according to the current limiting principle. The devices are used
More informationSafety 14 ga. Welded Plastic Bin Security Fire Resistant Gas Cylinder
All Cabinets Ship Flyer CAB07B...Many in 48 hrs. Heavy Duty All Welded CABINETS 40 Models Safety 14 ga. Welded Plastic Bin Security Fire Resistant Gas Cylinder Powder Coated Finish Safety Cabinets are
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationAvailable: Cylinders till july 2000 Spares till july /98 N
Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line
More informationPredator Model Number Nomenclature
DM, DH 6.5, 7.5, 8.5, 10.0, 12.5 Ton Single Package Air Conditioner HVAC SERVICE PARTS Supersedes: 035-17288-000 Rev A (800) 035-17288-001-A-0804 Predator Model Number Nomenclature 1 of 16 D H 120 N 20
More informationIndustrial Controls. 8WN Signaling Columns.
s Industrial Controls 8WN Signaling Columns www.siemens.co.in 8WN signaling columns 8WN44 Signaling columns, 70mm diameter, modular Selection and ordering data Buzzer elements Version Rated voltage Color
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in Sub-base plug-in Manifold mounting Sub-base non plug-in Sub-base plug-in 33 34 36 32 onded spool
More informationELITE 2-BURNER PROPANE BARBECUE Assembly Manual
ELITE 2-BURNER PROPANE BARBECUE Assembly Manual 85-3136-8 (G36402) Propane 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts claims
More informationMain Frame (1,676 MM (5-1/2 FT.) Hay Pickup)
Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM
More informationVia Montalbano 28 Loc.Ponte Stella, Serravalle Pistoiese C.A.P Pistoia Tel.0573/ Fax 0573/
TECHNICAL AND DIMENSIONAL CATALOGUE EDITION N 1-04 Via Montalbano 28 Loc.Ponte Stella, Serravalle Pistoiese C.A.P.51034 Pistoia Tel.0573/929163 Fax 0573/929190 E-mail: info@oleodinamicasabatini.it CAT-2004-I.doc
More information