Cyclone Manufacturing Sandblast and Abrasive Blast Equipment Manufacturing. SandBlasters, Dust Collector, and Specialty Equipment
|
|
- Baldwin Hodges
- 6 years ago
- Views:
Transcription
1 Cyclone Manufacturing Sandblast and Abrasive Blast Equipment Manufacturing. SandBlasters, Dust Collector, and Specialty Equipment Our Top Selling Models PK-36 Top & Side Door Opening Blast Cabinet 6035 Dual Side Opening Blast Cabinet 4826 Full Top & Side Door Opening Blast Cabinet 3824 Side Door Opening Blast Cabinet DC CFM Dust Collector Best Reasons To Buy From Cyclone Manufacturing Low initial investment (competitively priced) Easy installation and operation Low maintenance cost Prompt personal technical support Low cost/ fast replacement parts support
2 Bench Top Models Model PBH1000 Top Load Access 16" w x 12" d x 9" h working dimensions Pencil Operated. 1.5 CFM. 110 V Dust Collector NOT Included. Ship Wt 12 lbs. Model PBH2000 Top Load Access 22.5" w x 18" d x 14" h working dimensions Pencil Operated 1.5 CFM. 110 V Dust Collector NOT Included. Ship Wt 25 lbs. Model PBH2000Combo Top Load Access. 22.5" w x 18" d x 14" h working dimensions Pencil Operated 1.5 CFM. Dust Collector NOT Included. Ship Wt 300 lbs. Model E100 Top Load Access 22.5"w x 18"d x 14"h working dimensions Operated 14 CFM. 110 V Dust Collector NOT Included. Ship Wt 25 lbs. Model E500 Top Load Access 28"w x 18"d x 26"r-18"f h working dimensions Dust Collector NOT Included. Ship Wt 30 lbs.
3 Dust Collection Systems Model MS-1500 Economy Media Separator Must be used with a dust collection system. 24" w x 52.25" H Overall Dimensions Includes: 6 ft 2 1/4" Vac Hose Ship W750 lbs.. Model DC CFM Dust Collection System 16.5" diameter x 53.5" h Overall Dimensions Includes: Cart Filter, Bag Filter & hose. 110 V Ship Wt 325 lbs. Model DC CFM Dust Collection System 19" w x 60" H Overall dimensions Includes: Cart Filter, Cloth Wrap & hose. Can be used with up to 3 other cabinets. 1/3 NP Motor 3450 RPM Ship Wt 125 lbs.
4 Full Top & Side Opening Blast Cabinets Model FT3826 Full Top & Side Opening 38" w x 26" d x 25" h working dimensions Foot Operated 14 CFM. 110 V Dust Collector Included. Ship Wt 275. Model 4224 Full Top & Side Opening 42" w x 24" d x 23" h working dimensions Dust Collector Included. Ship Wt 245 lbs. Model 4826 Full Top & Side Opening 48" w x 26" d x 25" h working dimensions Foot Operated 14 CFM. 110 V Dust Collector Included. Ship Wt 275. Model 4040 Full Top & Side Opening 39" w x 40" d x 25" h working dimensions Foot Operated 14 CFM. 110 V Dust Collector Included. Ship Wt 345 lbs.
5 Portable Blast Systems Model 7003 Sand Blast Kit. Includes hose, trigger gun, 3 extra nozzles and pick up tube. Trigger Operated 14 CFM. Ship Wt 5 lbs. Model lb. Capacity. 12" Diameter, 24.75" H Ship Wt 15 lbs. Model PT lb. Capacity ASME Code Pressure Tank 12" Diameter, 29" H Manual Ball Valve Operated PSI Ship Wt 69 lbs. Model PT lb. Capacity. ASME Code Pressure Tank 16" Diameter 36" Manual Ball Valve Operated PSI Ship Wt 125 lbs.
6 Side Opening Blast Cabinets Model 3024 Side Opening 30" w x 24" d x 23" h working dimensions Dust Collector NOT Included. Ship Wt 110 lbs. Model 3824 Side Opening 38" w x 24" d x 23" h working dimensions Foot Operated 14 CFM. 110 V Dust Collector Included. Ship Wt 225 lbs. Model 6035 Dual Side Opening 60" w x 35" d x 25" h working dimensions Foot Operated 25 CFM. 110 V Dust Collector Included. Ship Wt 300 lbs. Model DW7335 Dual Side Opening 73" w x 35" d x 31" h working dimensions Foot Operated 25 CFM. 110 V Dust Collector NOT Included. Ship Wt 450 lbs.
7 Specialty Equipment Model ET150 Economy Turn Table 20" Diameter 12 Gauge Steel 150 lb. Maximum Weight Capacity Ship Wt 30 lbs. Parts not included. Model 203 Heavy Duty Hood (Gold Color) Model 204 Lite Duty Hood (Cream Color) Include: Hard Hat, 5" x 6" Replacement Lense. Made in the USA. Not air supplied. Ship Wt 5 lbs. Model SD36 Sit Down Blast Cabinet Side Opening Only. 16 Gauge Steel 36" w x 24" d x 17" h working dimensions Trigger 14 CFM. 110 V For use with most office/wheel chairs. Some assembly required. Dust Collector NOT Included. Ship Wt 75 lbs. Model MPT-28 Multi Purpose Pass Thru Cabinet Top Opening. 16 Gauge Steel Side SlideThru Openings 1/2" w x 24" H 26" w x 12" d x 29" h working dimensions Dust Collector Included. Ship Wt 150 lbs.
8 Specialty Equipment - 2 Model FT3522 Full Top Opening Blast Cabinet 34.5" w x 21.5"d x 18" h Working Dimensions 14 CFM Trigger Operated. 110 V. Dust Collector NOT Included. Model FT5428 Full Top & Side Open Blast Cabinet 52" w x 28" d x 25" h Working Dimensions 25 CFM Foot Operated. 110 V Dust Collector NOT Included. Ship Wt 325 lbs. Model HD4836 Side Opening Only. 12 Gauge Steel 47" w x 37" d x 23" h working dimensions Foot Operated 25 CFM. 110 V 400 CFM Dust Collector & Media Separator Included. 500 lb. Work Deck Capacity Ship Wt 450 lbs. Model T-15 Tumble Blast Cabinet Front Opening. 16 Gauge Steel 13.5" diameter x 12" d basket Stationary Gun Operated 14 CFM. 110 V 0-60 Minute Timer. 1/10 HP Motor Dust Collector NOT Included. Ship Wt 250 lbs. Model SL3730 Pass Thru Cabinet Side Opening. 16 Gauge Steel Side Slide Thru Openings 5" w x 36" H 36" w x 29" d x 34" h working dimensions Gun Assembly Not Included. 110 V Dust Collector Included. Ship Wt 325 lbs.
Top Side Door Door Model Work Area Height Door Options Opening Opening Gun Options Weight
FLOOR MODEL STEEL CABINETS 40403 40413 Standard Features for All Models 100 CFM dust collector included with all steel cabinets HD 14 gauge steel - welded seams Full width top door Optional additional
More informationIt also has provision to connect a dust extraction system via the side vent when heavy sandblasting is required.
SB-200 - Sandblasting Cabinet + Garnet Package Deal Recommended to be used with dust collector Package Deal Ex GST Inc GST $300.00 $330.00 Package Contents - SAVE $16.50 (Inc) 1 x S289 - SB-200 Sandblasting
More informationECONOLINE SAND BLAST CABINET USER GUIDE DOWNLOAD
04 February, 2018 ECONOLINE SAND BLAST CABINET USER GUIDE DOWNLOAD Document Filetype: PDF 430.02 KB 0 ECONOLINE SAND BLAST CABINET USER GUIDE DOWNLOAD How to Choose the Right Blast Media for Abrasive Blasting;
More informationSBCNNS. Abrasive Blast Cabinet Assembly & Operating Instructions
SBCNNS Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationPortable Systems & Parts Book
Portable Systems & Parts Book December 2017 General Table of Contents SECTION A: SuperBlast Systems SECTION B: Pneumatic Recovery Systems SECTION C: FaStrip Plastic Decoating Systems SECTION D: SafeStrip
More informationTHE MAGNUM SUCTION SYSTEM
LARRY HESS AND ASSOCIATES, INC. BLAST-IT-ALL P.O. BOX 1615 SALISBURY, NC 28145 WWW.BLAST-IT-ALL.COM THE MAGNUM SUCTION SYSTEM MANUAL NUMBER: 564 TABLE OF CONTENTS PAGE FIGURE 1 - SET-UP INSTRUCTIONS 2
More informationEmpire Finish & Reclaim Cabinets. Cabinet Models Options EFR-2636 SRC. Parts Cabinet Assembly Reclaimer Dust Bag Dust Collector Pipe String Blast Gun
EFR Empire Finish & Reclaim Cabinets Section C: Table of Contents Cabinet Models Options EFR- SRB EFR- SRC Parts Cabinet Assembly Reclaimer Dust Bag Dust Collector Pipe String Blast Gun Options Details
More informationLBT-3 WITH 300 CFM RECLAIM MANUAL NUMBER: 506 TABLE OF CONTENTS
LITTLE BLASTER LITTLE BLASTER LBT-3 WITH 300 CFM RECLAIM MANUAL NUMBER: 506 TABLE OF CONTENTS PAGE FIGURE 1 - SET-UP INSTRUCTIONS 1 - OPERATING INSTRUCTIONS 1 - GENERAL MAINTENANCE 2 1 STANDARD CABINET
More informationWITH 300 CFM RECLAIM MANUAL NUMBER: 563 TABLE OF CONTENTS
LITTLE BLASTER LARRY HESS AND ASSOCIATES, INC. BLAST-IT-ALL P.O. BOX 1615 SALISBURY, NC 28145 WWW.BLAST-IT-ALL.COM LITTLE BLASTER OYSTER SHELL WITH 300 CFM RECLAIM MANUAL NUMBER: 563 TABLE OF CONTENTS
More informationPORTABLE SANDBLASTER HOPPER KIT MODEL NO: CPSB1
PORTABLE SANDBLASTER HOPPER KIT MODEL NO: CPSB1 PART NO: 7640125 OPERATION & MAINTENANCE INSTRUCTIONS LS0309 INTRODUCTION Thank you for purchasing this Clarke Portable Sandblaster Hopper Kit. Before you
More informationPirate Brand. E-Series 3.5 / 6.5 CU FT - ABRASIVE BLASTERS. Proudly Distributed By: Product Line Brochure. Rev. Mar 14
Pirate Brand E-Series 3.5 / 6.5 CU FT - ABRASIVE BLASTERS Proudly Distributed By: Product Line Brochure Rev. Mar 14 Bag-Breaker/Screen or Optional Umbrella All E-Series portable blasters come standard
More informationAbrasive Blast Cabinet Assembly & Operating Instructions
3951103 Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important
More informationMACHINES / RECLAIMS WITH DUST BAG
WARNING SET-UP INSTRUCTIONS MACHINES / RECLAIMS WITH DUST BAG *** READ BEFORE OPERATING EQUIPMENT *** 1. Remove plastic from machine. 2. Remove lag bolts from each of the four legs, then remove machine
More informationCONTENTS 2. NOTICE 3 3. SET UP 4 8. CABINET PART DRAWING 9,10 9. ERGO CABINET PLUMBING 11,12, DUAL REMOTE CONTROL VALVE 14,15
CONTENTS 1. IMPORTANT WARNING 2 2. NOTICE 3 3. SET UP 4 4. GENERAL OPERATING INSTRUCTIONS 5 5. AIR REQUIREMENTS 6 6. P SERIES: Pressure cabinets 7 7. PRESSURE CABINET MAINTENANCE 8 8. CABINET PART DRAWING
More information$87995Reg Dlr. $1344
3 TON LOW PROFILE PROFESSIONAL FLOOR JACK 300T Low pick up point of 3.75 High height of 21.5 Universal joint technology for precise release valve control Plungers use a U Cup design instead of O ring,
More informationClemco Wetblast Systems Help Contractors Minimize Job Site Blast Dust. The Wetblast FLEX TM
Clemco has earned its reputation for quality and customer support over six decades of service to industry. Committed to extraordinary products, technical support, and service. ISO 9001 Certified Clemco
More informationABRASIVE BLAST CABINET
Model 272635 (KERNEL) ABRASIVE BLAST CABINET ( 350L ) ASSEMBLY & OPERATION INSTRUCTION (2 nd version) Jan. 2016 1 / 9 PRODUCT LIMITED WARRANTY The product is guaranteed for 12 months from date of manufacturer
More informationClemco has earned its reputation for quality and customer support over six decades of service to industry.
Clemco has earned its reputation for quality and customer support over six decades of service to industry. ISO 9001 Certified Clemco Wetblast Systems Help Contractors Minimize Job Site Blast Dust The Wetblast
More informationPRESSURISED SANDBLASTER
PRESSURISED SANDBLASTER MODEL NO: CPSB200 PART NO: 7640128 OPERATION & MAINTENANCE INSTRUCTIONS LS1211 INTRODUCTION Thank you for purchasing this Clarke Pressurised Sandblaster. Before you try to use this
More informationPRESSURISED SANDBLASTER
PRESSURISED SANDBLASTER MODEL NO: CPSB100 PART NO: 7640130 OPERATION & MAINTENANCE INSTRUCTIONS LS0510 INTRODUCTION Thank you for purchasing this Clarke Pressurised Sandblaster. Before you try to use this
More information36-1 DP PLEASE READ BEFORE USING THIS EQUIPMENT
36-1 DP PLEASE READ BEFORE USING THIS EQUIPMENT DP 36-1 Assembly Instructions PLEASE READ INSTRUCTIONS COMPLETELY BEFORE STARTING We thank you for purchasing the DP-36 pressure system. This system has
More information1. CONDITIONS FOR USE 2. SAFETY
1. CONDITIONS FOR USE This micro abrasive blaster may only be operated: Indoors; Below 6500 ft above sea level altitude; Ambient air temperature between 40-105 F (5-40 C); Maximum relative humidity of
More information(KERNEL) SAND BLAST CABINET ( 220L ) ASSEMBLY & OPERATION INSTRUCTION
Model 272622 (KERNEL) SAND BLAST CABINET ( 220L ) ASSEMBLY & OPERATION INSTRUCTION (1 st version) October 2014 1 / 12 PRODUCT LIMITED WARRANTY The product is guaranteed for 12 months from date of manufacturer
More informationStandard on the car lathe Sold bare - Or buy as a package with an adapter set and accessory kit. 2 year warranty
On the car Brake lathes Save time and money by turning rotors on the car Easy setup with a single spindle speed, single feed rate and positive rake tooling Choose from adapter sets that give you the coverage
More information1. CONDITIONS FOR USE 2. SAFETY
1. CONDITIONS FOR USE This micro abrasive blaster may only be operated: Indoors; Below 6500 ft above sea level altitude; Ambient air temperature between 40-105 F (5-40 C); Maximum relative humidity of
More informationHigh Pressure Abrasive Blast Cabinet 42000
Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure
More informationSPARK PLUG CLEANING KIT OPERATING MANUAL
SPARK PLUG CLEANING KIT OPERATING MANUAL Spark Plugs - Tools & Accessories P/N 01.20.002 Rev. 08/2015 Copyright Copyright 2015 MOTORTECH GmbH. All rights reserved. Distribution and reproduction of this
More informationGENERAL BROCHURE P:\ECOblast\4-MANUELS & PIECES\Francais\ Canablast\RCM12
ABRASIVE BLAST ROOM RECOVERY SYSTEM WITH SCREW CONVEYOR AND BUCKET ELEVATOR GENERAL BROCHURE 2015-12-09 P:\ECOblast\4-MANUELS & PIECES\Francais\ Canablast\RCM12 This sytem is perfect for large sandblast
More informationSandblast Solutions Inc. 900 Rike Drive, Millstone Township, NJ
900 Rike Drive, Millstone Township, NJ 08535 609-301-7599 info@sandblastinc.com *Air Drying Components *Air/Blast Hoses *Blast Accessories -- nozzles, hoods, abrasives. *Blast Pot Packages *Bristle Blasters
More informationSandblast Solutions Inc. 900 Rike Drive, Millstone Township, NJ
900 Rike Drive, Millstone Township, NJ 08535 609-301-7599 info@sandblastinc.com *Air Drying Components *Air/Blast Hoses *Blast Accessories -- nozzles, hoods, abrasives. *Blast Pot Packages *Bristle Blasters
More informationSIPHON FEED SANDBLASTER
SIPHON FEED SANDBLASTER MODEL NO: CSB10 PART NO: 7640117 OPERATION & MAINTENANCE INSTRUCTIONS LS0513 INTRODUCTION Thank you for purchasing this Clarke siphon feed sandblaster. Before you try to use this
More informationBLASTING SYSTEMS INSTRUCTIONS FOR & Part #13667
BLASTING SYSTEMS INSTRUCTIONS FOR 13943 & 13944 Part #13667 EASTWOOD BLASTING SYSTEMS Abrasive blasting has always been an alternative to chemical stripping on most parts of an antique or specialty car.
More informationPRESSURISED SANDBLASTER MODEL NO: CPSB200B
PRESSURISED SANDBLASTER MODEL NO: CPSB200B PART NO: 7640134 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0218 ISS 1 INTRODUCTION Thank you for purchasing this CLARKE Pressurised Sandblaster.
More informationSUPERHONE Installation * Operation * Maintenance * Replacement Parts
SUPERHONE Installation * Operation * Maintenance * Replacement Parts I.C.M., Inc. 10630 South Garfield Avenue South Gate, CA 90280-7395 Telephone: 562/869-3004 888/351-2570 Fax: 562/869-3005 Website: www.icm2000.com
More informationPRESSURISED SANDBLASTER MODEL NO: CPSB100B PART NO: OPERATION & MAINTENANCE INSTRUCTIONS
PRESSURISED SANDBLASTER MODEL NO: CPSB100B PART NO: 7640133 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0218 ISS1 INTRODUCTION Thank you for purchasing this CLARKE Pressurised Sandblaster.
More informationUR007 UR007-YEXP UR007-YJ UNI-RAM CORPORATION ONTARIO CANADA
USER MANUAL RECLAIMING SAND BLASTERS MODELS UR007 UR007-YEXP UR007-YJ UNI-RAM CORPORATION ONTARIO CANADA Revised 2010-03 CONTENTS INTRODUCTION... 3 CAUTIONS AND WARNINGS... 3 PREPARATION... 4 NOTES ON
More informationToll Free 1(800)
VecLoader Vacuums for Catalyst Handling To 6,200 CFM/ 28 Hg/350 Horsepower Versatile Closed-Loop Systems with Exceptional Power Vector Technologies has developed a line of trailer-mounted Catalyst vacuums
More informationATD-8400 BENCH TOP BLAST CABINET OWNER S MANUAL
ATD-8400 BENCH TOP BLAST CABINET OWNER S MANUAL Thank you for purchasing the ATD Bench Top Blast Cabinet, designed for professional workshop use. Please read this booklet thoroughly and follow the instructions
More informationMOISTURE MANAGEMENT SYSTEMS
MOISTURE MANAGEMENT SYSTEMS Blastmaster Air Dryers Moisture Management Systems remove water vapor from the compressed air stream. Water entering an abrasive blasting system causes wet abrasive, the leading
More informationJunior Sandblaster. Model #51 WARNING! FOR YOUR SAFETY PLEASE READ INSTRUCTIONS BEFORE OPERATING TOOL & WEAR EYE PROTECTION
Junior Sandblaster Model #51 WARNING! FOR YOUR SAFETY PLEASE READ INSTRUCTIONS BEFORE OPERATING TOOL & WEAR EYE PROTECTION PARTS LIST AND PART NUMBERS 01.Red Rubber Air Hose (5Ft) P51-01 02. Male Insert
More informationVacuums. Air Dryers. Decontamination Trailers. Dust Collectors. Generators. Heaters. Sandblast Pots. Spray Pumps. Steel Grit Recyclers
Air Dryers Decontamination Trailers Dust Collectors Generators Heaters Sandblast Pots Spray Pumps Vacuums Steel Grit Recyclers Van Air FD-1600 Blast Pak SSI Model # AD16VAN-1 609.301.7599 Dimensions In/Out
More informationAUTOMOTIVE TOOLS & EQUIPMENT
AUTOMOTIVE TOOLS & EQUIPMENT Distributed By: TRADE-LOGIX PO BOX 1450 WATERDOWN, ON LOR 2HO www.trade-logix.com Email: sales@trade-logix.com Tel: (905) 581-2292 TABLE OF CONTENTS CREEPERS & SEATS Page 2
More informationDust Collectors and Fume Exhausters
www.americanfan.com Bulletin DFM 1600 Dust Collectors and Fume Exhausters Howden Industrial Fan Group American Fan /Joy Fan /Garden City Fan Model DC DUST COLLECTOR The Model DC is a low cost packaged
More informationHIGH PRESSURE SANDBLASTING CABINET
OWNER S MANUAL PRODUCT CODE: BSB3056 HIGH PRESSURE SANDBLASTING CABINET Media Operating Nett Weight Cabinet Dimensions Overall Dimensions Size Air Pressure 25-80 Grit 30-115psi 210kg 1170x850x890mm 1320x1580x2060mm
More information1. CONDITIONS FOR USE 2. SAFETY
1. CONDITIONS FOR USE This micro abrasive blaster may only be operated: Indoors; Below 6500 ft above sea level altitude; Ambient air temperature between 40-105 F (5-40 C); Maximum relative humidity of
More informationAir Supply Controls & Gauges
HAR Air Regulators General purpose regulators for line takeoff use or as integral regulators on pumps, pressure tanks and other air operated devices. Require separate trap or filter in air line to remove
More information18 KG MOBILE SODA BLASTING UNIT
OWNER S MANUAL PRODUCT CODE: 3043 18 KG MOBILE SODA BLASTING UNIT Working Air Hose Tank Volume Overall Dimensions Pressure Consumption Length 18KG 35 90psi 6-12CFM 2400mm 460 x 305 x 660 Made in China
More informationLIQUID MEDIA BLASTER INSTRUCTIONS
Item #20668 LIQUID MEDIA BLASTER INSTRUCTIONS Pressure Washer Not Included The EASTWOOD LIQUID MEDIA BLASTER is specifically designed to use high pressure water from a pressure washer as a source for powerful
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationINTERNAL PIPE CLEANING TOOL
INTERNAL PIPE CLEANING TOOL OPERATION & MAINTENANCE MANUAL Manual # Twister1512 Contents Page Important Notice 3 Introduction, Specifications & Air Requirements 4 Assembly Procedure 5 & 6 Safety 7 Set-up
More informationINDUSTRIAL PARTS CATALOGUE SANDBLASTING EQUIPMENT (Cabinets, portable sandblasters and accessories...)
INDUSTRIAL PARTS CATALOGUE SANDBLASTING EQUIPMENT (Cabinets, portable sandblasters and accessories...) October 00 TABLE OF CONTENTS ECONO & ECAB Series Blast Cabinets...........................................
More informationPORTABLE PRESSURE BLASTER Model 80 PX
PORTABLE PRESSURE BLASTER Model 80 PX INSTRUCTION MANUAL & PARTS 1 Table of contents Page Read all instructions before using this machine 3 Safety instructions 4 Abrasive selection 5 Important safety instructions
More information1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)
Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm
More informationOwner s manual for installation, usage and maintenance
Owner s manual for installation, usage and maintenance AQC Dust Collecting Systems This manual is the property of the buyer. It is to be left with the unit after the installation and start-up. A. Q. C.
More informationPB900-GT SLOTBLASTER D-A PLEASE READ BEFORE USING THIS EQUIPMENT
PB900-GT SLOTBLASTER 101760D-A PLEASE READ BEFORE USING THIS EQUIPMENT PB900-GT Assembly Instructions PLEASE READ INSTRUCTIONS COMPLETELY BEFORE STARTING We thank you for purchasing the PB900-GT pressure
More informationWe are KULMEC, a brand name of Ahmedabad Pneumatic, the leading manufacturer and exporter of Air Compressor from CFM, Abrasiveblasting
We are KULMEC, a brand name of Ahmedabad Pneumatic, the leading manufacturer and exporter of Air from 140-335 CFM, Abrasiveblasting equipment, Mining & construction equipment. - About Us - Established
More informationPRODUCT OPERATING MANUAL
PRODUCT OPERATING MANUAL PANBLAST TM CS37 SUCTION BLAST CABINET Manual Number: ZVP PC 0069 00 SECTION 1. GENERAL INFORMATION 2. ASSEMBLY & INSTALLATION INSTRUCTIONS 3. OPERATING INSTRUCTIONS 4. MAINTENANCE
More informationPirate Brand. S-Series 1.5 / 3.5 / 6.5 CU FT - ABRASIVE BLASTERS. Proudly Distributed By: Product Line Brochure. Rev. June 12
Pirate Brand S-Series 1.5 / 3.5 / CU FT - ABRASIVE BLASTERS Proudly Distributed By: Product Line Brochure Rev. June 12 Features and Benefits Pressure Release (SPR) or Pressure Hold (SPH), 1.5, 3.5 or cu.
More informationCelebrating the Best Customer Service in the Industry For over years
Surface Prep Catalog www.aargotools.com CALL NOW FOR A SPECIAL ANNIVERSARY OFFER! & EQUIPMENT MANUFACTURING Universal Mucking Pumps Celebrating the Best Customer Service in the Industry For over years
More informationOperating Instructions for the. In Line Conveyor System West Cabot Boulevard Langhorne, PA w w w.empire-airblast.
Operating Instructions for the IL-885 In Line Conveyor System 2101 West Cabot Boulevard Langhorne, PA 19047-1893 w w w.empire-airblast.com Model Number: Serial Number: Date of Purchase: Date of Installation:
More informationINDUSTRIAL SERVICE TANKS
INDUSTRIAL SERVICE TANKS Glendale Service s are designed and built with you in mind. We ensure every PWT and VST Series tank is tailored to load quickly and efficiently. Over 25 years of experience, certified
More informationHBE 24 SCREW & CRIMP TERMINATED INSERTS
1 HBE 24 SCREW & CRIMP TERMINATED INSERTS SCREW TERMINATED View from Cable Side CRIMP TERMINATED Panel Cut-Out Contacts Sold Separately These inserts fit in the HBE 24 Series Housings which are on the
More informationPrice List 7. Manufacturer of Spray Guns
2015-16 Price List 7 Service Persistant Innovative Economical Manufacturer of Spray Guns Exclusive Range of & Products 2015-16 Price List 7 SPRAY GUNS Product Price List 2015-16 w.e.f. 1st April 2015 I
More informationHD 13/35-4 Cage. High-performance crankshaft pump. Safe storage
HD 13/35-4 Cage This product uses up to 350 bar of pressure to remove even the most stubborn dirt. The robust cage design provides all-round protection and enables safe crane loading. With sack-trolley
More informationTGK Katalog / TGK Catalog
4405 Sandblasting unit simple 5131002 Sandblast cabin MINI B: 580 x H: 295 x T: 480 mm 5120001 Compressor for cabine 5131002-24 ltr. tank on wheels 206l/min/140l/minl/8 bar/1,5 KW/ 230 V 5131003 Spiral
More information12" and 14" SAWS - 5 HP
12" and 14" SAWS - 5 HP MODEL K14SS These heavy-duty saws handle 2-1/2" solid round stock, 3" pipe with speed and efficiency. Extra-heavy Cast iron base, trunnion and arm. Sealed ball bearings, 1" wheel
More informationAll directions given in this book are as seen from the operator s position at the rear of the machine.
Service Manual S12, S16 S12cc Upright Vacuum READ THIS BOOK This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting
More informationSODA BLAST CONVERSION KIT MODEL NO: CSBCT
SODA BLAST CONVERSION KIT MODEL NO: CSBCT PART NO: 7640131 OPERATION & MAINTENANCE INSTRUCTIONS LS0314 INTRODUCTION Thank you for purchasing this CLARKE Soda Blast Conversion Kit. Before attempting to
More informationLARRY HESS AND ASSOCIATES, INC. 185 PIPER LANE SALISBURY, NC USA FAX
WARNING DO NOT USE SAND. SAND WILL CAUSE SILICA DUST, WHICH IS THE CAUSE OF SILICOSIS DISEASE, A CONDITION OF MASSIVE FIBROSIS OF THE LUNGS. THIS STATEMENT INDICATES POTENTIAL PERSONNEL HAZARD. FAILURE
More information8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP 10" WET SAW BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE. Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B
7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid round, 2" pipe. Adjustable
More informationFineFinish TITAN fine finishing applications
FineFinish TITAN fine finishing applications Titan offers a fine finishing sprayer for every size job from minor touch-ups to major industrial projects. All are designed to deliver maximum performance
More informationGood To Drill Happy Drilling Forever With PRD RIGS
www.prdrigs.com Good To Drill Happy Drilling Forever With PRD RIGS paranthaman Exporters About Us :- PRD Rigs Good To Drill Water Well Drilling Rigs PRD Max Drill 3000 6 ½ to 20 dia upto 1000 Mtrs Pull
More informationUTSTYR SEPTEMBER 2013
UTSTYR SEPTEMBER 2013 1) PARTSMASTER ANGLE GRINDER 125MM - VARIABLE SPEED 86200600 2) PARTSMASTER ELECTRIC DIE GRINDER - VARIABLE SPEED 86010003 3) PARSMASTER VARIABLE SPEED MULTI-TOOL 86100000 4) ADAPTER
More informationBASIC. Fine sandblasting units
1 BASIC s 2 Sandblasters that provide an optimum and freedom of movement The units make sandblasting easier by providing a uniquely good of the operator s hands and highly focused precision. This is what
More informationREAD THE INSTRUCTIONS BEFORE OPERATING SAVE INSTRUCTION BOOK
4005-0 10 Gallon AbrasiveBlaster SPECIFICATIONS Tank Size... 10 gallons Hose Length... 8 ft. Working Pressure... 60-125 psi Air Consumption... 6-25 cfm Overall Dimensions... 18.75 x 13 x 33.5 Gross Weight...
More informationASSEMBLY and OPERATING INSTRUCTIONS Mission Oaks Blvd. / Camarillo, CA 93011
SPARK PLUG CLEANER ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
More informationPRESSURE CABINETS PROBLEM CAUSE SOLUTION
BLAST CABINET TROUBLESHOOTING Page 1 PRESSURE CABINETS 1. Poor Visibility. Motor rotating backwards. The motor should rotate as indicated by the arrow on the housing. If it does not rotate in the proper
More information2034vx /2034vxa Sandcarving System
2034vx /2034vxa Sandcarving System Table of Contents Section 1 - Safety Information Section 2 - Setup Guide Section 3 - Operation Section 4 - Maintenance Reference Drawing U U Air Pressure Regulator Knob
More informationWELD STRONG BREATHE FREE
WELD STRONG BREATHE FREE WELD STRONG BREATHE FREE VentBoss was born from your needs; TOUGH, durable fume control equipment for today s metal fabricators. QUALITY products made in the US, backed by 20+
More informationHeavy Duty Sprayer Owners Manual Model MS-O
Heavy Duty Sprayer Owners Manual Model MS-O Table of Contents Warranty 4 Warning 5 Assembly and Preparation 6 Operation 7 Cleaning and Storage 7 Standard Spray Gun & Parts List 8 Trigger Style Spray Gun
More informationRAINING DIVISION. Equipment Selection for the Painting Contractor
RAINING DIVISION Equipment Selection for the Painting Contractor 1. THE APPLICATION: Assuming that a spray process is selected as the best method for the application of a coating, then the selection of
More informationThe Reference in Surface Treatment. PORTABLE PRESSURE BLASTER Model 80 PX INSTRUCTION MANUAL & PARTS
PORTABLE PRESSURE BLASTER Model 80 PX INSTRUCTION MANUAL & PARTS Table of contents Page READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE...3 SAFETY INSTRUCTIONS FOR SANDBLASTER...4 ASSEMBLING THE SANDBLASTER...4
More informationWhitton Supply. Woodworking Machinery. Air Filtration Jet Tools AFS-1000B 1000 CFM Air Filtration System 3 Speed with Remote Control
Air Filtration Jet Tools AFS-1000B 1000 CFM Air Filtration System 3 Speed with Remote Control Cycles per Inner Filter Speeds Timer Settings Motor Hour(20' x 20' x 8') Efficiency 708620B 19.58 1 556 / 702
More informationNEW CART SUPPLEMENT NEW CARTS FROM GRANITE INDUSTRIES
NEW CARTS FROM GRANITE INDUSTRIES WWW.GRANITEIND.COM 877-447-2648 5/16/2014 N We strive to move forward and improve our product lines every day... PTT3060-6 67263 WHEELED UTILITY CART WITH TUBS Designed
More informationElectric Portable Dry Vacuums
Electric Portable Dry Vacuums For use with air tools setup for two-tool operation. A cost-effective solution versus overhead central-vac systems. Quiet operation only 76 db(a). Variable Vacuum Control
More informationWaterblasting Systems
Waterblasting Systems COMPANY PROFILE PTC WATERBLASTING SYSTEMS is part of a worldwide group of companies manufacturing high pressure pumps, accessories, working tools, and complete high pressure units.
More informationBINKS PRESSURE TANKS FLUID HANDLING. ASME Code Stainless Steel, Galvanized, and ASME PT Series Tanks.
FLUID HANDLING ASME Code Stainless Steel, Galvanized, and ASME PT Series Tanks The case for ASME Code Tanks: Numerous government and insurance bodies (e.g. OSHA, your fire marshal, your insurance underwriter,
More informationMANUFACTURERS OF THE MOST COMPLETE LINE OF FLUX HANDLING EQUIPMENT IN THE WORLD PRODUCT SELECTION TOPICS INDEX
PRODUCT SELECTION TOPICS INDEX 1.) Air Powered Flux Recovery for Automatic Welding Heads (Standard Duty)...1-13 2.) Electric Powered Flux Recovery for Automatic Welding Heads (Standard Duty)...13-15 3.)
More informationAuto-Blast Complete Containment System
Auto-Blast Complete Containment System Click here to see it in action! Customized Systems Available To Meet All Your Blasting Requirements Containment system options include: Auto-Blast Smart Curtain Steel
More informationInventory # Lot # Lead
2125800 5 Transformer Cooler 2125801 6 Valves 2125802 7 Globe Valve 2125803 8 Check Valve 2125804 9 Flow Control Valve 2125805 10 Tricentic Valves 2125806 11 Gate Valve 2125807 12 Gate Valves 2125808 13
More informationClemco Hollo-Blast Jr. and Hollo-Blast
Clemco tools make pipe cleaning easier Suitable for pipe ID sizes from 3/4-inch to 137 inches Easy to set up All use standard pressure blast machine No need to rotate pipe or tubing Fast, economical, efficient
More informationThe perfect power tools High-pressure spray guns up to 3,000 bar
The perfect power tools High-pressure spray guns up to 3,000 bar 2 Spray guns up to 1,200 bar Spray gun SP 250-Vario with adjustable flow rate Spray guns SP 250 SP 250-Vario Operating pressure (max.) 250
More informationPeople. Passion. Performance. Portable Diesel Compressors Built for Reliable Performance
People. Passion. Performance. Portable Diesel Compressors Built for Reliable Performance ROBUST AND READY FOR THE MOST DEMANDING CONDITIONS Demanding conditions demand power you can count on. Chicago Pneumatic
More informationM ANUFACTURER S M ANUFACTURER, INC.
M ANUFACTURER S M ANUFACTURER, INC. P r o fe s s i o n a l P a i n t E q u i p m e n t B o d y E q u i p m e n t S t o r a g e S o l u t i o n s Volume 2017 w w w. m f g m f g. c o m 339 West Avenue I
More informationClemco Hollo-Blast Jr. and Hollo-Blast
l Clemco tools make pipe cleaning easier l Suitable for pipe ID sizes from 3/4-inch to 120 inches l Easy to set up l All use standard pressure blast machine l No need to rotate pipe or tubing l Fast, economical,
More informationHD 9/50-4 Cage 1 High-performance crankshaft pump 2 Safe storage
HD 9/50-4 Cage This product uses up to 500 bar of pressure to remove even the most stubborn dirt. The robust cage design provides all-round protection and enables safe crane loading. With sack-trolley
More informationKULMEC COMPRESSOR KULMEC DELIVERING QUALITY WORLD WIDE
R KULMEC COMPRESSOR KULMEC DELIVERING QUALITY WORLD WIDE RECIPROCATING COMPRESSOR ENGINE DRIVEN AIR COMPRESSOR Engine Pressure (Kg/cm) Pressure (Kg/cm) Free Air Delivery Engine Hp AP Mahindra DI AP 335
More informationAbout Mercury Floor Machines, Inc.
About Mercury Floor Machines, Inc. Our Commitment Our commitment is to consistently provide our customers with design excellence, the highest quality components and powerful performance. We believe that
More informationVice / work mats. Vices With tubular clamping jaws and turntable. Workplace mats For dry and wet areas. Back. Front.
Lifting platforms & pallet trucks Vice / work mats Vices With tubular clamping jaws and turntable Vice 12 mm 63012 Vice m 63010 Vice 17 mm 63017 Jaw width Min. clamping width Max. clamping width Clamping
More informationBNP 162, 164, and 166 Tumble Blast Cabinets O. M
BNP 162, 164, and 166 Tumble Blast Cabinets O. M. 14429 DATE OF ISSUE: 07/90 REVISION: F, 08/17 NOTICE TO PURCHASERS AND USERS OF OUR PRODUCTS AND THIS INFORMATIONAL MATERIAL Clemco proudly provides products
More information