EVOLVE 50. LEDSpots for Retail Lighting HID and Halogen Replacement NEW MODULAR LED ENGINES FOR MULTIPLE OPTICS CONFIGURATIONS

Transcription

1 LEDSpots EVOLVE 50 NEW MODULAR LED ENGINES FOR MULTIPLE OPTICS CONFIGURATIONS One of the main characteristics of this LED engines is their flexibility. The modularity of these LED engines allows you to combine different lenses and reflectors in order to get the result you expect. Moreover, with its easy to fit technology you connect optics or reflectores in a blink of an eye just click it in. Typical applications for LEDSpots Integration in luminaires Residential lighting Retail lighting Hospitality lighting

2 LED Engines for Evolve 50 and Active PLUS LEDSpot engine equipped with LED module, holder, thermal pad, heat sink and leads but without reflector or optics For reflectors PLUS and optics Evolve Optics fixation: click-in Heat sink material: aluminium Lumen maintenance S123/S124: L90/B10; 50,000 hrs. at 80 C (350 ma) Max. operating temperature at t p point: 110 C at 350 ma Lumen maintenance 7.2/9.2: L90/B20; 50,000 hrs. at 80 C (500 ma) Max. operating temperature at t p point: 100 C at 500 ma Temperature depends on installation situation and has to be checked by the luminaire manufacturer. Colour accuracy initially: 2 SDCM (S123/S124) 3 SDCM (7.2/9.2) Leads: Cu tinned, stranded conductors 0.5 mm², length: 200 mm, stripped lead ends (with plug on request) With integrated cord grip LEDSpot Engine S123 & S124 LEDSpot Engine 7.2 & 9.2 A Engine S123/S124 B Engine S123/S124 Type Weight Packaging g unit (pcs.) Engine S123/S ma Engine S123/S ma Engine Engine Engine Halo C Engine 9.2 D Engine 7.2 E Engine Halo LEDSpots_Evolve_EN 2/9 04/2018 2

3 LED Engines for Evolve 50 and Active PLUS Electrical characteristics Type 14 ma 250 ma 300 ma 350 ma 500 ma Pel (W) Vf (V) Pel (W) Vf (V) Pel (W) Vf (V) Pel (W) Vf (V) Pel (W) Vf (V) Engine S Engine S Engine Engine Engine Halo Voltage and power tolerance: ± 10% Optical characteristics at t p 70 C Type Ref. No. Colour Correlated Typ. luminous flux and efficiency at CRI Energy efficiency colour temperature 250 ma 300 ma at max. current K lm lm/w lm lm/w Ra LEDSpot Engine S123/S124 up to 300 ma Drawing A Engine S mA warm white A+ Engine S mA warm white A++ Engine S mA neutral white A++ Type Ref. No. Colour Correlated Typ. luminous flux and efficiency at CRI Energy efficiency colour temperature 250 ma 300 ma 350 ma at max. current K lm lm/w lm lm/w lm lm/w Ra LEDSpot Engine S123/S124 up to 350 ma Drawing B Engine S mA warm white A+ Engine S mA warm white A+ Engine S mA neutral white A+ Type Ref. No. Colour Correlated Typ. luminous flux and efficiency at CRI Energy efficiency colour temperature 350 ma 500 ma at max. current K lm lm/w lm lm/w Ra LEDSpot Engine 9.2 Drawing C Engine mA warm white A++ Engine mA warm white A++ Engine mA neutral white A++ LEDSpot Engine 7.2 Drawing D Engine mA warm white A++ Engine mA warm white A++ Engine mA neutral white A++ LEDSpots_Evolve_EN 3/9 04/2018 Type Ref. No. Colour Correlated Typ. luminous flux and efficiency at CRI Energy efficiency colour temperature 14 ma 350 ma at max. current K lm lm/w lm lm/w Ra LEDSpot Engine Halo Drawing E Engine Halo 350mA warm white 3000 > A+ 3

4 Lenses Evolve 50 for LED Engines For click-in fixation on holders Easy Diameter: 50 mm Material: PC Operating temperature: 40 to 110 C Storage temperature: 40 to 60 C Packaging units: 30 Pcs. Ref. No. For LED modules Beam Cover Optical Weight angle ( ) efficiency (%) g S124, S123, 9.2, 7.2, Halo* S124, S123, 9.2, 7.2, Halo* S124, S123, 9.2, 7.2, Halo* * In addition with mixing chamber *Mixing Chamber for Halo Material: PC Fixation: click-in Ref. No.: Flange Evolve To reduce light leakage (optional) Material: PBT, black Ref. No.: Reflectors PLUS for LED Engines For click-in fixation on holders Easy Diameter: 50 mm Material: PC Operating temperature: 40 to 110 C Storage temperature: 40 to 60 C Packaging units: 30 Pcs. LEDSpots_Evolve_EN 4/9 04/2018 Ref. No. For LED modules Beam Cover Optical Weight angle ( ) efficiency (%) g S124, S123, 9.2, Clear S124, S123, 9.2, Clear S124, S123, 9.2, Clear S124, S123, 9.2, 7.2, Halo 19 Frost S124, S123, 9.2, 7.2, Halo 26 Frost S124, S123, 9.2, 7.2, Halo 42 Frost

5 Evolve 124/123 Lens: Ø 50 mm, heat sink material: aluminium Lumen maintenance: L90/B10; 50,000 hrs. 80 C (350 ma) Max. operating temperature at t p point: 110 C at 350 ma Temperature depends on installation situation and has to be checked by the luminaire manufacturer. Colour accuracy initially: 2 SDCM Plastic clear cover to protect reflector (opaque cover on request) Leads: Cu tinned, stranded conductors 0.5 mm², length: 200 mm, stripped lead ends (with plug on request) With integrated cord grip Weight: 145/150 g (heat sink Ø 45 mm / Ø 64 mm) Packaging unit: 45/24 pcs. (heat sink Ø 45 mm / Ø 64 mm) A up to 300 ma A up to 300 ma B up to 350 ma B up to 350 ma Electrical characteristics Type 250 ma 300 ma 350 ma Pel (W) V f (V) P el (W) V f (V) P el (W) V f (V) S S Voltage and power tolerance: ± 10% LEDSpots_Evolve_EN 5/9 04/2018 Type Ref. No. Colour Correlated Typ. luminous flux and efficiency at Light intensity CRI Beam Energy efficiency colour temp. 250 ma 300 ma 350 ma at max. current angle at max. current K lm lm/w lm lm/w lm lm/w Candela Ra Warm white 2700 K Drawing A Evolve S123 27K warm white A+ Evolve S123 27K warm white A+ Evolve S123 27K warm white A+ Warm white 3000 K Drawing A Evolve S124 30K warm white A+ Evolve S124 30K warm white A+ Evolve S124 30K warm white A+ Neutral white 4000 K Drawing A Evolve S124 40K neutral white A+ Evolve S124 40K neutral white A+ Evolve S124 40K neutral white A+ Warm white 2700 K Drawing B Evolve S123 27K warm white A+ Evolve S123 27K warm white A+ Evolve S123 27K warm white A+ Warm white 3000 K Drawing B Evolve S124 30K warm white A+ Evolve S124 30K warm white A+ Evolve S124 30K warm white A+ Neutral white 4000 K Drawing B Evolve S124 40K neutral white A+ Evolve S124 40K neutral white A+ Evolve S124 40K neutral white A+ 5

6 Evolve 9.2 & 7.2 Lens: Ø 50 mm, heat sink material: aluminium Lumen maintenance: L90/B20; 50,000 hrs. 80 C (500 ma) Max. operating temperature at t p point: 100 C at 500 ma Temperature depends on installation situation and has to be checked by the luminaire manufacturer. Colour accuracy initially: 3 SDCM Plastic clear cover to protect reflector (opaque cover on request) Leads: Cu tinned, stranded conductors 0.5 mm², length: 200 mm, stripped lead ends (with plug on request) With integrated cord grip Weight: 145/95 g (Evolve 9.2/7.2) Packaging unit: 45 pcs. Evolve 9.2 Evolve 7.2 A Evolve 9.2 B Evolve 7.2 Electrical characteristics Type 350 ma 500 ma Pel (W) V f (V) P el (W) V f (V) Voltage and power tolerance: ± 10% LEDSpots_Evolve_EN 6/9 04/2018 Type Ref. No. Colour Correlated Typ. luminous flux and efficiency at Light intensity CRI Beam Energy efficiency colour temp. 350 ma 500 ma at max. current angle at max. current K lm lm/w lm lm/w Candela Ra Warm white 2700 K Drawing A Evolve K warm white A+ Evolve K warm white A+ Evolve K warm white A+ Warm white 3000 K Drawing A Evolve K warm white A++ Evolve K warm white A++ Evolve K warm white A++ Neutral white 4000 K Drawing A Evolve K neutral white A++ Evolve K neutral white A++ Evolve K neutral white A++ Warm white 2700 K Drawing B Evolve K warm white A++ Evolve K warm white A++ Evolve K warm white A++ Warm white 3000 K Drawing B Evolve K warm white A++ Evolve K warm white A++ Evolve K warm white A++ Neutral white 4000 K Drawing B Evolve K neutral white A++ Evolve K neutral white A++ Evolve K neutral white A++ 6

7 Evolve Halo Dim to warm Lens: Ø 50 mm Heat sink material: aluminium Lumen maintenance: L90/B10; 50,000 hrs. 80 C (350 ma) Max. operating temperature at t p point: 100 C at 350 ma Temperature depends on installation situation and has to be checked by the luminaire manufacturer. Colour accuracy initially: 3 SDCM Leads: Cu tinned, stranded conductors 0.5 mm², length: 200 mm, with plug With integrated cord grip Weight: 160 g Packaging unit: 28 pcs. Electrical characteristics Type 14 ma 350 ma Pel (W) Vf (V) Pel (W) Vf (V) Evolve HALO Voltage and power tolerance: ± 10% Type Ref. No. Colour Correlated Typ. luminous flux and colour temperature at Light intensity CRI Beam Energy efficiency colour temp. 14 ma 350 ma at max. current angle at max. current K lm K lm K Candela Ra Evolve HALO Warm white Evolve HALO warm white 3000 > A+ Evolve HALO warm white 3000 > A+ Evolve HALO warm white 3000 > A+ Production tolerance of luminous flux: ± 10% LEDSpots_Evolve_EN 7/9 04/2018 7

8 LED Drivers You will find more information about our LED drivers on our website: Capacity range Output Output Ref. No. Version Current setting Dimming Max. service life time Dimensions For type current DC voltage DC at tc (LxWxH) W ma V hrs. C mm S123/S ma EasyLine Terminals 50, x67.4x31 x * EasyLine Phase cutting 50,000 65* 115x45x25 x * EasyLine 50,000 65* 115x45x25 x ComfortLine LEDSet 100, x43x30 x ComfortLine LEDSet 100, x43x30 x EasyLine Phase cutting 50, x45x19 x 300 ma ComfortLine LEDSet 100, x43x30 x ComfortLine LEDSet 100, x43x30 x * EasyLine Phase cutting 50,000 65* 115x45x25 x * EasyLine 50,000 65* 115x45x25 x 350 ma EasyLine 50, x45x19 x EasyLine 50, x45x19 x x x EasyLine Terminals 50, x67.4x31 x ComfortLine LEDSet 100, x43x30 x ComfortLine LEDSet 100, x43x30 x EasyLine 30, x45x25 x EasyLine 122.8x45x19 x x x EasyLine 50, x42x6x30.3 x x x EasyLine 50, x43.7x30 x x x PrimeLine LEDSet DALI 100, x67.4x31 x x PrimeLine LEDSet DALI 100, x67.4x31 x x PrimeLine LEDSet DALI 100, x79x4x32.6 x ComfortLine 50, x37x28 x x ComfortLine 50, x30.7x21.5 x x EasyLine Phase cutting 50, x41.4x32 x ComfortLine Terminals 1 10 V 50, x67.4x31 x 400 ma ComfortLine LEDSet 100, x43x30 on request ComfortLine LEDSet 100, x43x30 on request ComfortLine LEDSet 100, x43x30 on request 500 ma EasyLine 50, x45x19 x EasyLine 50, x45x19 x EasyLine 50, x42x6x30.3 x EasyLine 50, x43.7x30 x PrimeLine LEDSet DALI 100, x67.4x31 x ComfortLine 50, x37x28 x EasyLine Phase cutting 50, x45x19 x Please ensure you choose the correct LED driver for the module in question and that the respective output parameters (current, voltage, wattage) are correct. * preliminary LEDSpots_Evolve_EN 8/9 04/2018 8

9 LEDSpot Evolve Installation Instruction General safety information VS product may only be installed and commissioned by authorised and fully qualified staff. These instructions must be carefully read before installing and commissioning the system, as this is the only way to ensure safe and correct handling. An external constant-current driver is required. Before any work is carried out on the equipment, it must be disconnected from the mains. All valid safety and accident-prevention regulations must be observed. The products should never be inexpertly opened. Repairs may only be undertaken by the manufacturer. Built-in Correct position Product Guarantee 5 years The conditions for the Product Guarantee of the Vossloh-Schwabe Group shall apply as published on our homepage ( We will be happy to send you these conditions upon request. LEDSpots_Evolve_EN 9/9 04/2018 9