Security steel door dw 62-1 Teckentrup

Size: px

Start display at page:

Download "Security steel door dw 62-1 Teckentrup"

Calvin Johns
6 years ago
Views:

1 Teckentrup RC 2 Text example Compile and tender according to requirements. Please refer to technical data below for respective details. Updated 1 st June 2015 Position No. of pieces Item Security steel door dw 62-1 Teckentrup, tested in accordance with DIN EN 1627-RC 2. Singleleaf door element. Type of handing DIN right. Door leaf 62 mm thick, rebated on 3-sides. Corner frame 1.5 mm thick, with 3-sided seal and bottom sill. Door-leaf and frame galvanized and powder-coated (primed) in Grey white, similar to RAL FS-Alu safety-handle set, class ES 1 DIN Safety profile cylinder P2 with anti-drilling and extraction protection BZ, DIN keys and security certificate. 2 KO s with ball bearings. 1 security bolt. Unit price Total price register no. PIV CERT 22V22 Steel door dw 62-1 Teckentrup or equivalent Technical data Product: Security steel door dw 62-1 Teckentrup in accordance with DIN EN 1627-RC 2 Heat insulation as per EN ISO U D = 1.8 W/(m² K) (unglazed) Installation in: Masonry min. 115 mm Concrete min. 100 mm Aerated concrete min. 170 mm Lightweight construction stud walls must meet the manufacturer`s security requirements Dimensions: width: mm height: mm Type of handing: Door leaf: Frame: Surface: DIN right or DIN left Double-skinned, thin rebated on 3 sides Door leaf thickness: 62 mm Sheet thickness: 1.0 or 1.5 mm Security bolts: min. 1 Insulation: mineral fibre board Corner frame 1.5 mm thick, with 3-sided seal, and bottom sill. Frame fixed with 3 screws each side. Special equipment: - counter frame, 1.5 mm thick - block frame or closed frame, 2.0 mm thick Door leaf/frame galvanized and powder coated (primed) similar to RAL 9002 (Grey white). Hinges, closing devices: 2 KO s with ball bearings (secured bolt) Fittings: Mortice lock with latch lever, prepared for profile cylinder, (up to MD-height 2750 mm only with main lock, > 2750 mm with top locking) FS-Alu safety-handle set, class ES 1 DIN Safety profile cylinder P2 with anti-drilling and extraction protection BZ, DIN keys and security certificate Glazing: Burglar resistance class as per DIN EN 356-P4A. VSG (laminated safety glass) 10 mm, ISO-glass VSG/VSG 24 mm Clear size up to 1 m 2 Additional equipment: Handle sets / Lever/Knob sets: light metal stainless steel Locks (Danger side = side) (Danger side = opposite side) panic locks block lock (must be provided) Top door closer DIN EN 1154 Wide angle spyhole Lock control (bolt contact) Escape door opener Alarm wire insert Security chain (also lockable) Steel transformer grille Rain guard Ordering size/ Modular dim. Standard sizes: 750 x x x x x Further qualifications (special equipment): Clear passage size (corner frame) 666 x x x x x Sound insulated as per DIN EN 20140/717-1 Rw 37dB with bottom buffer Rw 37dB with retractable bottom seal Rw 35dB with sliding threshold seal Subject to technical changes. 103

2 Teckentrup RC 2 Optionally with top door closer Clear opening 1088 to 2958 Plinth height 183 Modular dimension 750 to 1500 Clear opening 666 to 1416 with through glazing and steel glas-holding strips DIN left shown, DIN right laterally reversed Floor connections: Image 1: with bottom buffer Image 2: with bottom buffer and seal Image 3: with retractable bottom seal Image 1 Image 2 Image 3 retractable bottom seal Installation in masonry/ concrete walls concrete walls 100 mm closed- and counter frame Wall anchor Weld-on Installation with block frame Flush installation between concrete walls 100 mm disassembled pre-assembled block-frame type 1.1 block-frame type 2.1 block-frame type 2.2 block-frame type 3 block-frame type 4.1 Installation in autoclaved aerated concrete walls (with TDC) Made of autoclaved aerated concrete blocks or high precion units in acc. with DIN 4165 strength class 4 min. 170 mm or made of reinforced autoclaved aerated concrete slabs strenght class 4. Wall thickness 170 mm 104 Subject to technical changes.

3 Teckentrup RC 3 Text example Compile and tender according to requirements. Please refer to technical data below for respective details. Updated 1 st June 2015 register no. PIV CERT 22V22 Position No. of pieces Item Security steel door dw 62-1 Teckentrup, tested in accordance with DIN EN 1627-RC 3. Single-leaf door element. Type of handing DIN right. Door leaf 62 mm thick, rebated on 3-sides. Corner frame 1.5 mm thick, with 3-sided seal and bottom sill. Door leaf and frame galvanized and powder-coated (primed) in Grey white, similar to RAL FS-Alu safety-handle set, class ES 3 DIN Safety profile cylinder with anti-drilling and extraction protection BZ as per DIN keys and security certificate. 2 KO s with ball bearings. 4 security bolts. Steel door dw 62-1 Teckentrup or equivalent Unit price Total price Technical data Product: Security steel door dw 62-1 Teckentrup in accordance with DIN EN 1627-RC 3 Heat insulation as per EN ISO U D = 1.8 W/(m² K) (unglazed) Installation in: Masonry min. 115 mm Concrete min. 120 mm Aerated concrete min. 240 mm Lightweight construction stud walls must meet the manufacturer`s security requirements Dimensions: width: mm height: mm Type of handing: Door leaf: Frame: Surface: DIN right or DIN left Double-skinned, thin rebated on 3 sides Door leaf thickness: 62 mm Sheet thickness: 1 or 1.5 mm Security bolt: min. 4 Reinforcement: flat steel Insulation: mineral fibre board Corner frame 1.5 mm thick, with 3-sided seal, and bottom sill. Frame fixed with 3 screws each side. Special equipment: - counter frame, 1.5 mm thick - block frame or closed frame, 2.0 mm thick Door leaf/frame galvanized and powder coated (primed) similar to RAL 9002 (Grey white). Hinges, closing devices: 2 KO s with ball bearings (secured bolt) Fittings: Mortice lock with latch lever, prepared for profile cylinder, (up to MD-height 2500 mm only with main lock, > 2500 mm with top locking) FS-Alu safety-handle set, class ES 3 DIN Safety profile cylinder P2 with anti-drilling and extraction protection BZ as per DIN keys and security certificate Glazing: Burglar resistance class as per DIN EN 356-P6B. VSG (laminated safety glass) 18 mm, ISO-glass VSG/VSG 32 mm Clear size up to 1.0 m 2 Additional equipment: Handle sets / Lever/Knob sets: light metal stainless steel Locks (Danger side = side) (Danger side = opposite side) panic locks block lock (must be provided) Top door closer DIN EN 1154 Wide angle spyhole Lock control (bolt contact) Escape door opener Alarm wire insert Security chain (also lockable) Steel transformer grille Rain guard Ordering size/ Modular dim. Standard sizes: 750 x x x x x Further qualifications (special equipment): Clear passage size (corner frame) 666 x x x x x Sound insulated as per DIN EN 20140/717-1 Rw 37dB with bottom buffer Rw 37dB with retractable bottom seal Rw 35dB with sliding threshold seal Subject to technical changes. 105

4 Teckentrup RC 3 Optionally with top door closer Plinth height 183 Modular dimension 750 to 1500 Clear opening 666 to 1416 with through glazing and steel glas-holding strips DIN left shown DIN right laterally reversed Floor connections: Image 1: with bottom buffer Image 2: with bottom buffer and seal Image 3: with retractable bottom seal Image 1 Image 2 Image 3 retractable bottom seal Installation in masonry/ concrete walls concrete walls 120 mm closed- and counter frame Wall anchor Weld-on Installation with block frame Flush installation between concrete walls 120 mm disassembled pre-assembled block-frame type 1.1 block-frame type 2.1 block-frame type 2.2 block-frame type 3 block-frame type 4.1 Installation in autoclaved aerated concrete walls Made of autoclaved aerated concrete blocks or high precion units in acc. with DIN 4165 strength class 4 min. 240 mm or made of reinforced autoclaved aerated concrete slabs strenght class 4. Wall thickness 240 mm 106 Subject to technical changes.

5 Teckentrup RC 4 optionally with glazing Text example Compile and tender according to requirements. Please refer to technical data below for respective details. Updated 1 st June 2015 Position No. of pieces Item Security steel door dw 62-1 Teckentrup, tested in accordance with DIN EN 1627-RC 4. Singleleaf door element. Type of handing DIN right. Door leaf 62 mm thick, rebated on 3-sides. Corner frame 2mm thick, with 3-sided seal and bottom sill. Door-leaf and frame galvanized and powder-coated (primed) in Grey white, similar to RAL FS-Alu safety-handle set, class ES 3 DIN Safety profile cylinder with antidrilling and extraction protection BZ as per DIN keys and security certificate. 2 KO s with ball bearings. 4 security bolts. Unit price Total price register no. PIV CERT 45V01 Steel door dw 62-1 Teckentrup or equivalent Technical data Product: Security steel door dw 62-1 Teckentrup in accordance with DIN EN 1627-RC 4 Installation in: Masonry min. 240 mm Concrete min. 140 mm Dimensions: width: mm height: mm Type of handing: Door leaf: Frame: DIN right or DIN left Double-skinned, thin rebated on 3 sides Door leaf thickness: 62 mm Sheet thickness: 1.5 mm Security bolts: min. 4 Reinforcement: to DIN EN 1627 Insulation: mineral fibre board Corner frame 2.0 mm thick, with 3-sided seal, and bottom sill. Frame fixed with 3 screws each side. Special equipment: - counter frame 1.5 mm thick - block frame or closed frame, 2.0 mm thick Glazing: Burglar resistance class as per DIN EN 356-P6B. VSG (laminated safety glass) 18 mm, ISO-glass VSG/VSG 32 mm Clear size up to 1.0 m 2 Additional equipment: Handle sets / Lever/Knob sets: light metal stainless steel Locks (Danger side = side) (Danger side = opposite side) panic locks block lock (must be provided) Top door closer DIN EN 1154 Wide angle spyhole Lock control (bolt contact) Escape door opener Alarm wire insert Security chain (also lockable) Rain guard Surface: Door leaf/frame galvanized and powder coated (primed) similar to RAL 9002 (Grey white). Hinges, closing devices: 2 KO s with ball bearings (secured bolt) Fittings: Mortice lock with latch lever, prepared for profile cylinder, with additional top and bottom locking FS-Alu safety-handle set, class ES 3 as per DIN18257 Safety profile cylinder P2 with anti-drilling and extraction protection BZ as per DIN keys and security certificate Ordering size (modular dim.) Standard sizes: 750 x x x x x Clear passage size (corner frame) 666 x x x x x Subject to technical changes. 107

6 Teckentrup RC 4 optionally with glazing Optionally with top door closer Plinth height 183 with through glazing and steel glas-holding strips Modular dimension 750 to 1500 Clear opening 666 to 1416 DIN left shown DIN right laterally reversed Floor connections: Image 1: with bottom buffer Image 2: with bottom buffer and seal Image 3: with retractable bottom seal Image 1 Image 2 Image 3 retractable bottom seal Installation in masonry/ concrete walls concrete walls 140 mm masonry walls 240 mm closed- and counter frame Wall anchor Weld-on Installation with block frame Flush installation between concrete walls 140 mm masonry walls 240 mm disassembled pre-assembled block-frame type 1.1 block-frame type 2.1 block-frame type 2.2 block-frame type 3 block-frame type Subject to technical changes.

Sound insulated doors

Sound insulated doors Standard program overview Sound-insulated steel doors Sound-insulated single and double-leaf steel doors Dimensions Leaf thickness, sheet thickness * Tested as a sound insulated door