ZHS Compact Excavator. ZHS Compact Excavator

Transcription

1 430 ZHS Compact Excavator 435 ZHS Compact Excavator

2 Improve your swing... and your drive Bobcat 430 and 435 ZHS Compact Excavators Contractors Landscapers Utilities Rental Operators The Bobcat 430 and 435 are the world s first compact excavators with Zero House Swing (ZHS) and the FastTrack drive system and they re ready to take on the biggest challenges you can throw at them! No Trade-Offs Competing Zero Tail Swing excavators typically compromise operator comfort (cab space decreases); overall height (cab height increases); and serviceability (smaller space for component placement). The innovative design of the 430/435 overcomes these faults. Zero House Swing gives you 320 degrees of unrestricted motion. Zero House Swing Many competing excavators offer Zero Tail Swing, but the 430 and 435 take the concept to the next level Zero House Swing (ZHS). Not only does the rear of the machine stay within the excavator s width, so does the front end the machine s left and right front corners! ZHS decreases the chances of accidentally striking buildings or trees during operation. And no damage to the machine or surrounding objects means lower operating costs! Tight Spaces No Problem Zero House Swing also permits easier spoil placement in tight quarters. If necessary, the operator can slew completely around and dump spoil behind the machine. The ZHS design allows a zero radius swing range of nearly 320 degrees. This makes the 430 and 435 ideal for jobsites where maneuverability in small spaces is a must.

3 TWICE as fast as competing excavators FastTrack Drive System With the revolutionary FastTrack system, dedicated axial piston pumps power the travel motors to give you jobsite advantages that competing machines can t even come close to. Smooth, precise turns. Maximum torque control. Unmatched travel speed. In fact, the travel speed of the 430/435 is nearly twice the speed of the nearest competitor. You can move the 430 and 435 much faster within jobsites and between jobsites. Low-range speeds of nearly 3 mph eliminate the need to shift between speed ranges on most backfilling projects. The 430/435 grade, doze and backfill faster than other machines. And because you have more predictable control of the drive system, loading and unloading trailers is also much easier. Thumb-Control Auxiliary Hydraulic System A Bobcat exclusive. Variable flow, continuous flow, direction of flow all auxiliary hydraulic functions are controlled by two convenient switches on the right joystick. Flow rate adjusts from zero to full flow. Variable flow for precision control of attachments. For continuous flow, operator does not have to constantly press or hold a control mechanism. Cab Height The 430 is less than eight feet tall, a critical limit on many jobsites. Dual-Cylinder Dozer Blade with Float How s this for standard equipment? The versatile dozer blade is not only invaluable for backfilling, dozing and leveling, it also serves as a stabilizer and improves lift capacity when lifting loads over the front of the excavator. Rubber or Steel Tracks Tracks distribute the machine s weight over a large area, reducing ground pressure and minimizing damage to lawns and other surfaces. Tracks also allow the excavator to perform where rubber-tired machines bog down. The result more working days per year. Impressive Digging Force The 430 and 435 deliver plenty of power for bigger jobs excavation, trenching, demolition, material handling and placement with exceptional digging force! Serviceability Access to machine components for routine maintenance and service is exceptional because of the swing-open rear tailgate and flip-up side access hood. Operator Comfort The spacious cab provides plenty of head room, leg room and elbow room for even the biggest operators. A wide door opening allows easy entry and exit.

4 Operator and Service Training Course The Bobcat Compact Excavator Operator and Service Training Course and a 10-minute safety video are available in English and Spanish. Check out the Training Resources link at

5 Optional Arms The longer dipper stick reaches farther from one spot to do more work without repositioning the machine. The extra reach, combined with a higher dump height, also makes loading trucks faster and easier. 430 Long Arm Option The long arm version of the 430 gives you an additional 12 in. of reach and 7 in. of dump height, resulting in a maximum reach of 17 ft., 8 in., and a maximum dump height of 10 ft., 10 in. 435 Long Arm Option The long arm on the 435 extends reach by 12.5 in. and dump height by 9.5 in., giving you a maximum reach of 19 ft., 5 in., and a maximum dump height of 12 ft., 9 in. 430 Extendable Arm Option The extendable arm increases the 430 s maximum reach to 19 ft., 2 in., with a maximum dump height of 11 ft., 3 in.

6 Bobcat 430 and 435 ZHS Excavators Specifications Performance Operating Weight 8024 lb. (3640 kg) 8662 lb. (3930 kg) 8662 lb. (3930 kg) 8258 lb. (3746 kg) lb. (4788 kg) lb. (4900 kg) Travel Speed Low 2.6 mph (4.2 km/h) 2.6 mph (4.2 km/h) 2.6 mph (4.2 km/h) 2.6 mph (4.2 km/h) 2.8 mph (4.5 km/h) 2.8 mph (4.5 km/h) High 5.0 mph (8.0 km/h) 5.0 mph (8.0 km/h) 5.0 mph (8.0 km/h) 5.0 mph (8.0 km/h) 5.4 mph (8.7 km/h) 5.4 mph (8.7 km/h) Hydraulic Pumps Type Piston w/gear Piston w/gear Piston w/gear Piston w/gear Piston Piston Total Capacity 24 gpm (90.9 L/m) 24 gpm (90.9 L/m) 24 gpm (90.9 L/m) 24 gpm (90.9 L/m) 29.7 gpm (112.5 L/m) 29.7 gpm (112.5 L/m) Auxiliary Flow 16.4 gpm (62.1 L/m) 16.4 gpm (62.1 L/m) 16.4 gpm (62.1 L/m) 16.4 gpm (62.1 L/m) 19.8 gpm (75.0 L/m) 19.8 gpm (75.0 L/m) Track Shoes Rubber (steel optional) Rubber (steel optional) Rubber (steel optional) Rubber (steel optional) Rubber (steel optional) Rubber (steel optional) Width 12.6 in. (320 mm) 12.6 in. (320 mm) 12.6 in. (320 mm) 12.6 in. (320 mm) 15.7 in. (400 mm) 15.7 in. (400 mm) Ground Pressure 4.21 psi (29.0 kpa) 4.54 psi (31.3 kpa) 4.54 psi (31.3 kpa) 4.33 psi (29.9 kpa) 4.07 psi (28.1 kpa) 4.15 psi (28.6 kpa) Overall Machine Width 70.1 in. (1780 mm) 70.1 in. (1780 mm) 70.1 in. (1780 mm) 70.1 in. (1780 mm) 76 in. (1930 mm) 76 in. (1930 mm) Working Range Arm Length 47.2 in. (1200 mm) 47.1 in. (1195 mm) 79.5 in. (2019 mm) 59.1 in. (1500 mm) 54 in. (1372 mm) 67.8 in. (1722 mm) Max. Digging Height 180 in. (4571 mm) in. (4490 mm) in. (4812 mm) in. (4755 mm) in. (5346 mm) in. (5588 mm) Max. Dump Height 123 in. (3125 mm) in. (3112 mm) in. (3434 mm) in. (3305 mm) in. (3649 mm) in. (3889 mm) Max. Digging Depth in. (3066 mm) in. (3062 mm) in. (3878 mm) in. (3366 mm) in. (3420 mm) in. (3772 mm) Max. Vertical Wall 85.6 in. (2175 mm) 74.7 in. (1897 mm) in. (2714 mm) in. (2604 mm) in. (2568 mm) in. (2883 mm) Max. Reach at Ground Level in. (5097 mm) in. (5096 mm) in. (5846 mm) in. (5395 mm) in. (5611 mm) in. (5961 mm) Arm Breakout Force 3860 lbf. (17170 N) 3860 lbf. (17170 N) 2678 lbf. (11912 N) 3321 lbf. (14773 N) 5262 lbf. (23406 N) 4525 lbf. (20128 N) Bucket Breakout Force 6889 lbf. (30644 N) 6889 lbf. (30644 N) 6889 lbf. (30644 N) 6889 lbf. (30644 N) 7892 lbf. (35105 N) 7892 lbf. (35105 N) Engine 430 Standard Arm 430 Extendable 430 Extendable Arm Retracted Arm Extended 430 Long Arm 435 Standard Arm 435 Long Arm Bobcat Attachments for these models: Auger Breaker Clamp Cutter Crusher Grading Blade Grading Bucket Grapple Hydra-Tilt Packer Wheel Plate Compactor PowerTilt Rotating Grapple Ripper Trenching Buckets Trencher Make / Model Kubota V2203-M-DI-E2B-BC1 Kubota V2003-M-DI-TE2B-BC1 Fuel / Cooling Diesel / Liquid Diesel / Liquid (Turbo) Cylinders / Displacement Four / 134 cu.in. (2.2 L) Four / 122 cu. in. (2.0 L) Horsepower / RPM 42.8 hp ( rpm 49 hp ( rpm Capacities Fuel Tank 17.8 gal. (67.4 L) 17.8 gal. (67.4 L) Hydraulic System 13.5 gal. (51.1 L) 14.3 gal. (54.2 L) Hydraulic Reservoir 9.7 gal. (36.7 L) 9.7 gal. (36.7 L) Cooling System 9.5 gal. (36 L) 9.5 gal. (36 L) Drive/Swing System Track Tensioning System Grease cylinder / Coil spring Grease cylinder / Coil spring Swing Speed 9.1 rpm 9.6 rpm Swing Clearance, Rear 34.7 in. (881 mm) 37.6 in. ( 955 mm) (Zero Tail Swing) (Zero Tail Swing) Boom Swing Left Right Standard Equipment Options/ Accessories Auxiliary Hydraulics Console Control Locks Control Pattern ISO/STD Selector Valve Cup Holder Dozer Blade with Float AM / FM Radio Kit Cab w/heat Cab w/hvac Engine Shutdown FastTrack Drive System Four-Post TOPS/ROPS Canopy Keyless Ignition Steel Tracks Travel Motion Alarm Kit High-Back Suspension Seat Horn Hydraulic Joystick Control Power Port Retractable Seatbelt Rubber Tracks Spark Arrestor Muffler Swing Boom Two-Speed Travel Work Lights (frame-mounted and boom-mounted) X-Change Attachment Mounting System Zero House Swing NOTE Where applicable, dimensions are in accordance with Society of Automotive Engineers (SAE) and ISO standards. Specifi cations and design are subject to change without notice. Pictures of Bobcat excavators may show other than standard equipment. All dimensions are shown in inches. Respective metric dimensions are enclosed by parentheses. Bobcat Company complies with the requirements of ISO 9001 as registered with BSI in. (4897 mm) in. (3726 mm) in. (5238 mm) in. (4003 mm) 95.5 in. (2426 mm) in. (2541 mm) 59.9 in. (1522 mm) 64.7 in. (1644 mm) 70.9 in. (1801 mm) 88.9 in. (2258 mm) 65.7 in. (1669 mm) 15.4 in. (392 mm) 70.1 in. (1780 mm) 12.6 in. (320 mm) 76.1 in. (1932 mm) 98.3 in. (2496 mm) 72.5 in. (1843 mm) 17.4 in. (442 mm) 76.0 in. (1930 mm) 15.7 in. (400 mm) B-1774 Bobcat Company P.O. Box 6000 West Fargo, ND Printed in U.S.A. Kn-30M-704 -# F