Cooling Systems CC Series TT rail 20/30lpm
|
|
- Alvin Wood
- 6 years ago
- Views:
Transcription
1 CC Series 20/30lpm General Data And Details The oil / air coolers of our CC series are autonomous cooling systems with an integrated circulation pump. They work as a separate cooling unit or as a ilter cooling unit with an adequate ilter. The beneits of such circulation coolers are a constant cooling performance and a higher durability, because there are no pressure vibrations or peaks in the cooler unit. Conditions of use: Maximum oil temperature: 100 C, maximum air temperature: 50 C. Motors can be used up to an altitude of 1.500m. For other conditions of use please contact our engineers. Connection asa rail y x The asa rail system is the irst worldwide lexible mounting and connection system for air blast heat exchangers. It gives you the free choice of the connector direction through turnable ports. The rail slots in the radiator are the frame structure not only for connecting the ports, also for various possible mounting arrangements such as bypass systems, mounting of the cooler to aggregates, measurement devices and much more. Please contact us to discover the huge potential of this system for your application. x y Scale Drawing 40
2 CC Series 20/30 lpm TT 25 4-pol TT 25 6-pol TT 16 4-pol TT 16 6-pol TT 11 4-pol TT 11 6-pol TT 07 4-pol TT 07 6-pol compact group product overview LL 06 LL 04 LL 02 LL 01 Technical Data description order number oil low max. working pressure power current rotation air low noise level weight A C D K L M N [lpm] [bar] [kw] [A] [rpm] [kg/s] [db(a)] [kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm] TT 07 rail CC 4-pol TT07RA47CC ,75 1, , , TT 11 rail CC 4-pol TT11RA47CC ,75 1, , , TT 16 rail CC 4-pol TT16RA47CC ,75 1, , , TT 25 rail CC 4-pol TT25RA47CC ,75 1, , , TT 07 rail CC 6-pol TT07RA66CC ,37 1, , TT 11 rail CC 6-pol TT11RA66CC ,37 1, , , TT 16 rail CC 6-pol TT16RA66CC ,37 1, , , TT 25 rail CC 6-pol TT25RA66CC ,37 1, , , The maximum suction pressure is -0,4 bar. The viscosity range is <100cSt. Motor voltage: 50Hz*. The protection level is IP55. Design radiator material radiator air in shape pump type pump material (housing) sheet metal material suitable luids Connection (BSP 1 ) Options ILLZATT53G25K gerotor powder coated steel mineral oil asa rail connector BSP 1 ¼ temperature switch 50 C, 60 C data* alternative voltages, frequencies, protection levels, etc on request HL 0929 HL 1247 HL 1508 electronic mounting connection 41 Cooler Systems Calculation
3 CC Series Series 40/60 lpm General Data And Details The oil / air coolers of our CC series are autonomous cooling systems with an integrated circulation pump. They work as a separate cooling unit or as a ilter cooling unit with an adequate ilter. The beneits of such circulation coolers are a constant cooling performance and a higher durability, because there are no pressure vibrations or peaks in the cooler unit. Conditions of use: Maximum oil temperature: 100 C, maximum air temperature: 50 C. Motors can be used up to an altitude of 1.500m. For other conditions of use please contact our engineers. Connection asa uc z The AUC (asa universal connector) system was the irst worldwide lexible connection system for air blast heat exchangers. It gives you the free choice of the connector direction through turnable ports in 3 directions. Also the dimension of the ports can be varied with optional types. Please contact us to discover the huge potential of this system for your application. x y Scale Drawing order number description A B C D E H1 H2 K L M N P [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] 0177AA49CC 0177 CC 4-pol AA49CC 0257 CC 4-pol AA49CC 0367 CC 4-pol AA49CC 0467 CC 4-pol AA49CC 0567 CC 4-pol AA68CC 0177 CC 6-pol AA68CC 0257 CC 6-pol AA68CC 0367 CC 6-pol AA68CC 0467 CC 6-pol AA68CC 0567 CC 6-pol
4 CC Series Series 40/60 lpm group product overview LL 06 LL 04 LL 02 LL 01 Technical order number description oil low max. working pressure power current rotation air low noise level weight [lpm] [bar] [kw] [A] [rpm] [kg/s] [db(a)] [kg] 0177AA49CC 0177 CC 4-pol ,5 3, , ,7 0257AA49CC 0257 CC 4-pol ,5 3, , ,0 0367AA49CC 0367 CC 4-pol ,5 3, , ,4 0467AA49CC 0467 CC 4-pol ,5 3, , ,7 0567AA49CC 0567 CC 4-pol ,5 3, , ,1 0177AA68CC 0177 CC 6-pol ,75 1, , ,7 0257AA68CC 0257 CC 6-pol ,75 1, , ,0 0367AA68CC 0367 CC 6-pol ,75 1, , ,4 0467AA68CC 0467 CC 6-pol ,75 1, , ,7 0567AA68CC 0567 CC 6-pol ,75 1, , ,1 The maximum suction pressure is 0,5 bar. The viscosity range is <240cSt. Motor voltage: 50Hz*. The protection level is IP55. Design radiator material radiator air in shape pump type pump material (housing) sheet metal material suitable luids Connection (BSP 1 ) Options ILLZ32G32 (BSP1¼ ) ILLZ40G40 (BSP1½ ) screw pump powder coated steel mineral oil temperature switch 50 C, 60 C data* alternative voltages, frequencies, protection levels, etc on request compact HL 0929 HL 1247 HL 1508 electronic mounting connection 43 Cooler Systems Calculation
5 GT cooler The GT cooler is a ready mounted cooler package, consisting of a cooler, protection housing, mounted rail connectors and the ready wired electronic temperature control. All standard cooler sizes from TT 07 to 0177 are available as a GT cooler. Also the internal bypass version is easy to integrate with the same housing dimensions. The temperature control is a relay box in connection with a temperature sensor controlling the fan with the optimal fan speed and a soft start curve (see page 36). This reduces the noise level and increases the duration of the fan unit. The protection housing is a solid metal framework for rough mobile and special applications. The radiator side is protected by a metal grid and the whole cooler is mounted on the asa rubber vibration absorbers to reduce the mechanical stress. Speciic cooling performance Dimensions TT 16 GT TT 11 GT TT 07 GT h.p. TT 07 GT Technical Data order number description A B C D E F G H J K L weight optional internal bypass (30PSI) [mm] [mm] [mm] [mm] [mm] [mm] BSP [mm] [mm] [mm] [mm] [kg] cooler order no. TT07GD01GT TT 07 rail 12V GT ,7 TT07GD01BPGT TT07GD02GT TT 07 rail 24V GT ,7 TT07GD02BPGT TT07GD03GT TT 07 rail 12V GT h.p ,1 TT07GD03BPGT TT07GD04GT TT 07 rail 24V GT h.p ,1 TT07GD04BPGT TT11GD01GT TT 11 rail 12V GT ,1 TT11GD01BPGT TT11GD02GT TT 11 rail 24V GT ,1 TT11GD02BPGT TT16GD01GT TT 16 rail 12V GT ¼ ,6 TT16GD01BPGT TT16GD02GT TT 16 rail 24V GT ¼ ,6 TT16GD02BPGT Coniguration ready mounted and wired! 4x shock absorbers 1x temperature sensor 1x radiator 1x protection housing 1x fan unit 1x fan speed control unit Radiator material working temperature range: air in shape: working pressure: internal bypass 20 C to +80 C (oil temperature) 26 bar (static) alternative bypass settings (1bar / 5 bar) 44
Off-line filter / cooler unit BKF
FluidControl Off-line filter / cooler unit BKF In hydraulic systems oil transfers power and motion, and in drives it s a vital lubricant. Both as a power transfer medium and as a lubricant, oil is heated
More informationOFFLINE SERIES GLOBAL STANDARD COOLER. p f
OFFLINE SERIES GLOBAL STANDARD COOLER Sales@SouthwestThermal.com p. 888-6-8 f. 80-484-0049 www.akgcoolers.com OIL-to-AIR COOLING SYSTEMS Product Information AKG Offline Series, based on AKG Cool-Line Series,
More informationOil/Air Cooler Units. Standard series EL Type. Test procedure certified following EN 1048
COMPLETE OIL / AIR COOLER SYSTEM WITH AXIAL FAN FOR INDUSTRIAL APPLICATIONS. Application These high performance coolers with axial fans are suitable for hydraulic cooling applications with both return
More informationOil/air cooler BLK. Fluidcontrol
Fluidcontrol Oil/air cooler BLK Drives and hydraulic aggregates are used in machine construction, raw material production, maritime and many other areas. In hydraulic systems oil transfers power and motion,
More informationHEAT EXCHANGERS AIR/OIL TYPE LAC. - ATEX Version. Approved for applications where there may be an explosive environment above ground.
Heat exchangers Air/Oil LAC - LAC with AC Motor for Industrial Use - Maximum cooling capacity 300 kw Heat exchangers Air/Oil LAC-X - ATEX Version. Approved for applications where there may be an explosive
More informationCirculation pumps BFP-ATEX-T3/T4
Circulation pumps BFP-ATEX-T3/T F ATEX - range of use: to zone 1 and zone 1 T3 to zone 1 and zone 1 T Low noise emission High vol. efficiency Optimum suction Gerotor principle Resistant to contamination
More informationOff-Line Filter BNF. FluidControl
FluidControl Off-Line Filter BNF In hydraulic systems oil transfers power and motion, and in drives it s a vital lubricant. Both as a power transfer medium and as a lubricant, oil is heated by friction
More informationOff-line filter / cooler unit FGSL
Fluidcontrol Off-line filter / cooler unit FGSL Coolers are used to stabilise the operating temperature in hydraulic and lubrication systems. This can be implemented particularly cost-efficiently by integrating
More informationOil/Air Cooler Units. Compact application with AC Motor OK-ELC Type
COMPACT OIL / AIR COOLERS NEW COMPACT DESIGN WITH AC ELECTRIC FANS AND HIGH COOLING PERFORMANCE Application These coolers are designed specifically for hydraulic applications where high performance and
More informationH-Cube System hydraulic oil conditioning cooler filter oil tank fan drive
H-Cube System hydraulic oil conditioning cooler filter oil tank fan drive discover the customized standard. DD-H-Cube-en-rev3 asa hydraulik, September 2017 1/8 Main features and benefits of the H-Cube
More informationOil/air cooler BLK. Fluidcontrol
Fluidcontrol Oil/air cooler BLK Drives and hydraulic aggregates are used in machine construction, raw material production, maritime and many other areas. In hydraulic systems oil transfers power and motion,
More informationCoolers. OK Series. Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF Cooling Systems Catalog. Applications
OK Series Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF 3-11 OKA 4-6 OKAF 4-6 OKA 8-11 OKAF 8-11 Description The OK Series cooler design uses a axial fan assembly which draws air through the cooler.
More informationOil/Air Cooler Units. Compact application with AC Motor OK-ELC Type. Test procedure certified following EN 1048
COMPACT OIL / AIR COOLERS NEW COMPACT DESIGN WITH AC ELECTRIC FANS AND HIGH COOLING PERFORMANCE Application These coolers are designed specifically for hydraulic applications where high performance and
More informationOil/Air Cooler Units. Mobile series with DC motor OK-ELD Type. Test procedure certified following EN 1048
MOBILE OIL / AIR COOLERS NEW COMPACT DESIGN WITH DC ELECTRIC FANS AND HIGH COOLING PERFORMANCE Application These coolers are designed specifically for mobile hydraulic applications where high performance
More informationA20 A20. Aluminium heat exchanger 398SAE004EN00
Aluminium heat exchanger A A 98SAEEN Before using the heat exchanger, carefully read the document entitled GENERAL INSTRUCTIONS FOR HEAT EXCHANGER USE. 98SAEEN - --7 A V-V Dimensions ± L MAX C 8,, H ±
More informationA-L O C COOLING SYSTEM OLAER COOLERS. Olaer A-LOC with integrated circulation pump for industrial hydraulic systems
OLAER A-L O C COOLERS COOLING SYSTEM Olaer A-LOC with integrated circulation pump for Olaer A-LOC with integrated circulation pump for industrial hydraulic systems R OLAER A-LOC FOR OPTIMUM EFFICIENCY
More informationAir Cooled Exchangers With Aluminium Cooling Elements
AIR COOLED Versacool Series Cooler AC electric models deliver more air flow resulting in greater performance while using a smaller diameter lower noise fan. Cylindrical air jet discharge pattern eliminates
More informationOil/Air Cooler Units. Standard series OK-P type. Test procedure certified following EN
COMPLETE OIL / AIR COOLER WITH AXIAL FAN FOR INDUSTRIAL APPLICATIONS. Application These high performance coolers with axial fans are suitable for hydraulic cooling applications. Typical applications include:
More informationELH Series - Hydraulic Fan Drive
- Hydraulic Fan Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements combined with a high capacity hydraulic fan drive to give
More informationA26. Aluminium heat exchanger A26
Aluminium heat exchanger A A Before using the heat exchanger, carefully read the document entitled GENERAL OPERATING INSTRUCTIONS FOR HEAT EXCHANGER USE 98SAEEN - 8--8 A V-V Dimensions ± L MAX 99 H ± T
More informationELD Series - DC Motor Drive
ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended
More informationOil/Air Cooler Units. Mobile application and Hydraulic motor OK ELH Type. Test procedure certified following EN 1048
MOBILE OIL / AIR COOLERS NEW COMPACT DESIGN WITH HYDRAULIC MOTOR AND HIGH COOLING PERFORMANCE Application These coolers are designed specifically for mobile hydraulic applications where high performance
More informationOil/air cooler BLK ATEX-3GD
FluidControl Oil/air cooler BLK ATEX-3GD Drives and hydraulic aggregates are also used in explosive areas in machine construction or raw material production. In hydraulic systems oil transfers power and
More informationFluid Handling: Panel Unit
Fluid Handling: Panel Unit A permanently mounted, continuous-duty system for critical applications or difficult to access equipment. It also can serve as a maintenance station. The Overview The Panel Unit:
More informationELD Series - DC Motor Drive
ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended
More informationCONTINENTAL HYDRAULICS F03MSV-ND* FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK F03MSV-ND* - FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK
CONTINENTAL HYDRAULICS F03MSV-ND* FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM TOUGH F03MSV-ND* FLOW CONTROL
More informationAir Cooled Exchangers With Aluminium Cooling Elements
AIR COOLED Versacool Series Cooler AC electric models deliver more air flow resulting in greater performance while using a smaller diameter lower noise fan. Cylindrical air jet discharge pattern eliminates
More informationOFFLINE SERIES GLOBAL STANDARD COOLER
OFFLINE SERIES GLOBAL STANDARD COOLER OIL-TO-AIR COOLING SYSTEMS WITH AC-MOTOR AND PUMP Product information AKG-Line is a standard line of products from the market leader in high performance aluminium
More informationAir Cooled Exchangers With Aluminium Cooling Elements DC ELECTRIC HEAT EXCHANGERS
COOLED DC ELECTRIC HEAT EXCHANGERS Total of 4 stock models including and 4 volts. DB models are standard performance with fully weather proofed fans with interference suppression. DA models are high performance
More informationFluid Cooling Industrial COLW Series
Fluid Cooling Industrial COLW Series 0916 COPPER & STEEL CONSTRUCTION Performance Notes Ideal for independent cooling and filtering of system oils Utilizes a high efficient EK series shell & tube (finned
More informationAir Cooler Industry AC-LN 8-14 / ACA-LN 8-11 / ACAF-LN 8-11
Air Cooler Industry AC-LN 8-14 / ACA-LN 8-11 / ACAF-LN 8-11 Symbol General The AC-LN 8-14 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers
More informationAir Cooler Mobile OK-ELD 0-6 with DC motor
ir ooler Mobile OK-ELD 0-6 with D motor Symbol General The OK-ELD air cooler series is designed specifically for mobile hydraulic applications where high performance and efficiency are required and physical
More informationCTR Series. Turbine low meters with conditioned output and built-in loading valve. Up to. Output Options. Features. Hydraulic measurement and control
CTR Series Turbine low meters with conditioned output and built-in loading valve Milwaukee, WI 323, USA Tel: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. PE27 3LZ, UK Tel: +44 (0) 1480 397 400
More informationGLOBAL STANDARD COOLER
GLOBAL STANDD COOLER AKG 009 (changes and errors expected) Sales@SouthwestThermal.com p. 888-6-8 f. 80-484-0049 www.akgcoolers.com GLOBAL STANDD Rugged Environment COOLING SYSTEMS Product Information AKG
More informationFluid Cooling Brazed Plate BPSW Series
Fluid Cooling Brazed Plate BPSW Series 0916 STAINLESS STEEL CONSTRUCTION Performance Notes Short lead time Stacked plate Stainless steel Copper brazed (nickel option) Oil to water applications High performance
More informationCooling Systems Air Cooled / Liquid Cooled
Cooling Systems Air Cooled / Liquid Cooled About HYDAC HYDAC stands for worldwide presence and accessibility to the customer. HYDAC has over 1000 distributors worldwide and more than 40+ wholly owned branches.
More informationOil circulation lubrication systems. Product catalogue
Oil circulation lubrication systems Product catalogue Table of contents Introduction Two leading brands 4 Lubricants suitable for lubrication systems 5 System description 6 System advantages 7 Applications
More informationGLOBAL STANDARD COOLER
GLOBAL STANDARD COOLER A A OIL-to-AIR COOLING SYSTEMS WITH AC-MOTOR Product Information AKG-Line is a standard line of products from the market leader in high performance aluminium cooling systems. AKG
More informationProduct Data Sheet HKK70VSD Revision 1 (Variant Code E)
Product Data Sheet Revision 1 (Variant Code E) 1 Application Application Refrigerant Expansion Device Cooling Type LBP R600a Capillary Static To be used also in appliances with stop valve (technical consultation
More informationNCF fans 50 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
More informationFILTERS. PUMP CARE - Suction filters TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS. PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW
FILTERS HYDRAULIC DIVISION - Suction filters SD TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW SPARE PARTS ORDERING INFORMATION DINSIONS OF
More informationFormulas and units
Formulas and units Hydraulic system and circuit design is limited only by the creativity of the application engineer. All basic circuit design begins with the ultimate actuator functions in mind however.
More informationAAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:
AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average
More informationA-L A C AIR OIL COOLER LUFT/ÖL-KÜHLER OLAER COOLERS. Olaer A-LAC with A.C. motors for industrial hydraulic systems
OLAER A-L A C COOLERS AIR OIL COOLER Olaer A-LAC with A.C. motors for industrial hydraulic systems Olaer A-LAC with A.C. motors for industrial hydraulic systems LUFT/ÖL-KÜHLER Oiltech LAC mit Wechselstrommotor
More informationElectric cylinders CASM
Electric cylinders CASM 32-4-63 Contents Product description 4 Motors and gearboxes 6 Manuals 1 3D models 1 Linear unit 3 12 Linear unit 4 14 Linear unit 63 16 linear unit 18 Actuator 32 2 Actuator 4 32
More informationPROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL
PROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL 1.1 SUMMARY A. Packaged Chillers offer a self-contained means of producing cooling liquid primarily
More informationOff-line Oil Filter Module Pi 8400
Off-line Oil Filter Module Pi 8400 Volume flow l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
More informationAir Cooler Mobile AC-LNH 8-14 with hydraulic motor
ir Cooler Mobile C-LNH 8-1 with hydraulic motor Symbol General The C-LNH air cooler series is designed specifically for mobile hydraulic systems where high performance and efficiency are required and physical
More informationSINGLE STAGE TWO STAGES
BLOWERS CATALOG Table of contents SINGLE STAGE TWO STAGES 3 4 1 1 5 6 7 8 9 10 11 12 Weight (Kg) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 2RSC 50-65 Performance curve for Vacuum
More informationHYDRAULIC MOTOR FAN DRIVEN PRODUCTS
HYDRAULIC MOTOR FAN DRIVEN PRODUCTS HEAT EXCHANGERS K & KBV SERIES HEAT-EXCHANGERS HPV SERIES I HPV Series II www.emmegiinc.com EMMEGI Heat Exchanger Features HEAT-EXCHANGERS 2 Bar & Plate Technology www.emmegiinc.com
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECHNICAL DATA 500
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE BEST 2 203 PERFORMANCE CURVE BEST 3 203 PERFORMANCE CURVE BEST 4 203 PERFORMANCE CURVE BEST
More informationFILTERS. TANK CARE - Return filters TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS. PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW
ILTERS HYDRAULIC DIVISIO TAK CARE - Return filters RC TECHICAL DATA ORDERIG AD OPTIOS CHART CLOGGIG IDICATORS PRESSURE DROP ( p) CURVES CROSS UCTIOAL VIEW SPARE PARTS ORDERIG IORMATIO DIMESIOS O THE ILTER
More informationCoolers. Air Cooled / Liquid Cooled
Air Cooled / Liquid Cooled HYDAC stands for worldwide presence and accessibility to the customer. HYDAC has over 1000 distributors worldwide and more than 40 wholly owned branches. Our know-how has evolved
More informationNCF fans 60Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
More informationSpin-on Filters. Maxiflow Series. MAX 360 I/min - 10 bar. Low pressure filters
Spin-on ilters MX 36 I/min - 1 bar 61 Spin-on ilters eatures & Benefits eatures Integrated indicator igh quality paint for canisters Spin-on filters available for suction and return line filtration igh
More informationHYDROVAR IncReAseD flexibility AnD control with new generation
HYDROVAR Increased flexibility and control with new generation HYDROVAR, the modern variable speed pump drive is taking pumping to a new level of flexibility and efficiency. m Motor or wall mountable m
More informationFiltrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
More informationLKI LKI-HYD COOLING. Series. advanced quality customized designs made in europe. Oil/Air heat exchangers. Low noise level. High performance.
advanced quality customized designs made in europe Oil/Air heat exchangers Series LKI For industrial use LKI-HYD For mobile use OIL-AIR COOLING Low noise level High performance Low cost The cut-away perspective
More informationRETURN FILTERS. MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass
COMPONENTS RC MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2002) Max working:
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE RIGHT PERFORMANCE CURVE RIGHT
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 75 204 PERFORMANCE CURVE 100 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 BEARINGS 301 MECHANICAL
More informationPVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS
14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group
More informationMINI POWER PACKS WITH SUBMERSED MOTOR AND PUMP
MINI POWER PACKS WITH SUBMERSED MOTOR AND PUMP CMI Summary table Essential characteristic of the control unit compact CMI is the arrangement of the motor pump unit completely immersed in the oil inside
More informationOil Filter Module Pi 8300
Oil Filter Module Pi 8300 Volume flow 1 und 220 l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECHNICAL DATA 500
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE BEST 2 203 PERFORMANCE CURVE BEST 3 204 PERFORMANCE CURVE BEST 4 205
More informationGraphic Symbol 100 L 140 G25. R -M V 4 4 G P E. Perm.* 2 Magnet. Differential Pressure P. Connection. R: BSP.F Thd. O: Not Fitted.
ollowing are the Accessories used in the Hydraulic Systems iller Breather Model Code Method of Representation: According to Model Code in the above table. Suction Strainer Model Code SS 15 evel Gauge iltration
More informationPRPM2-A. = 5.5 Nm (4.1 lb.-ft.) (qual. 8.8 Nm (6.5 lb.-ft.) for socket cap screws. = 50 Nm (36.9 lb.-ft.) for cartridges
Technical Information General Description proportional pressure reducing valves keep a constant pressure p red on the secondary, or regulated, side, independent of pressure fluctuations on the primary
More informationFluid Cooling Mobile AOHM / AOVHM Series
Fluid Cooling Mobile Series 0916 Performance Notes AO/AOVH Series with hydraulic motor Adjustable louvers (manual) High heat removal Heavy duty construction Wide flow range Heat removal up to 210,000 BTU/HR
More informationMODEL DIMENSIONS, mm WEIGHT OIL FILL L W H A B C D E kg l HK 450/ x ,9
1 Dynaset HK hydraulic compressor gives high quality, efficient compressed air to different kinds of applications; pneumatic tools, air flushing, tire filling, cleaning, etc. Compact hydraulic air compressor
More information2.4 HEAVY DUTY SERIES
2 2.4 HEAVY DUTY SERIES CONTENTS PPV102 Ordering Code 2.4.1 Heavy Duty Series 2.4.2 Heavy Duty Series compensator 2.4.3 Standard gear pump models Technical Information 2.4.4 Specifications 2.4.5 Hydraulic
More informationFilter cooler unit with inline filter according to DIN Type ABUKG. Contents. Features. RE Edition: Replaces: 50126
Filter cooler unit with inline filter according to DIN24550 Type ABUKG RE 50125 Edition: 2013-04 Replaces: 50126 Component series 4X With gerotor pump, external gear pump SILENCE PLUS or screw spindle
More informationIGP /117 ED INTERNAL GEAR PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
00/7 ED IGP INTERNAL GEAR PUMPS OPERATING PRINCIPLE IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement. The pumps
More informationMODEL DIMENSIONS, mm WEIGHT OIL FILL L W H A B C D E kg l HK 450/ x ,9
1 Dynaset HK hydraulic compressor gives high quality, efficient compressed air to different kinds of applications; pneumatic tools, air flushing, tire filling, cleaning, etc. Compact hydraulic air compressor
More informationMICROPUMP MAG-DRIVE GEAR PUMPS
MAG-DRIVE GEAR PUMPS REVISION # 1 DATE: 6-6-6 WETTED MATERIALS Pump housings: 316 stainless steel. Gears: PEEK. Gear shafts: 316 stainless steel. Gear shaft bearings: PEEK. Driven magnet: Totally encapsulated
More informationFeed Pumps FZP / MFZP
eed Pumps ZP / MZP Symbol General The feed pump from the ZP series is a vane pump for the low-pressure range with constant flow rate. Product eatures l irect drive pump no bell housing or coupling required
More informationToll-free: 1 (844) MAGISTER
About Us.................................................... 2 Production................................................... 3 Quality Policy.................................................4 Quality Control................................................5
More informationCalculation of external available Pressure. [m/s] 0,41 0,62 0,82 1,03 1,23 1,44 1,64 1,85 2,05 2,47 2,88 3,29 3,7
Calculation of external available Pressure Page 1 Size: 1 Air flow volume [m³/h] 4 6 8 1 12 14 16 18 2 24 28 32 36 1. Criterion flow velocity (Ref. 2 C) Do not design units in conditions acc. to white
More informationIndustrial Diesel Generator Set KD1650-E 50 Hz - Emission Optimized EPA Tier 2 Compliant
RATINGS 400V - 50 Hz Standby kva 1650 KWe 1320 Prime kva 1500 KWe 1200 Benefits & features SDMO premium quality SDMO provides one source responsibility for the generating system and accessories The generator
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART IDROGO PERFORMANCE CHART IDROGO
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART 40 203 PERFORMANCE CHART 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW 301
More informationIndustrial Diesel Generator Set KD3500-F 50 Hz Fuel Consumption Optimized
RATINGS 400 V - 50 Hz Standby kva 3500 KWe 2800 Prime kva 3182 KWe 2546 Benefits & features premium quality provides one source responsibility for the generating system and accessories The generator set,
More informationP.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
More informationIndustrial Diesel Generator Set KD1250-UE 60 Hz - Emission Optimized EPA Tier 2 Certified
RATINGS 480 V - 60 Hz Standby kva 1562.50 KWe 1250 Prime kva 1420 KWe 1136 Benefits & features premium quality provides one source responsibility for the generating system and accessories The generator
More informationFeed Pumps Direct Drive Series 1.1.
1.1. FEED PUMP SERIES FZP AND MFZP 1. GENERAL The feed pump, type FZP, is a direct drive vane pump with constant flow rate. It is available with flanged motor (MFZP) and comes with internal pressure relief
More informationIndustrial Diesel Generator Set KD1100-F 50 Hz Fuel Consumption Optimized
RATINGS 400 V - 50 Hz Standby kva 1100 KWe 880 Prime kva 1000 KWe 800 Benefits & features SDMO premium quality SDMO provides one source responsibility for the generating system and accessories The generator
More informationIndustrial Diesel Generator Set KD2500-F 50 Hz Fuel Consumption Optimized
RATINGS 400 V - 50 Hz Standby kva 2500 KWe 2000 Prime kva 2273 KWe 1818 Benefits & features SDMO premium quality SDMO provides one source responsibility for the generating system and accessories The generator
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 QUANTITY FOR MODEL 303 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE 40/86 203 PERFORMANCE CURVE 40/106 204 PERFORMANCE CURVE 40/126 205 PERFORMANCE CURVE 40/156
More informationChoose quality. FIMA 1
S C R E W C O M P R E S S O R S M A D E I N I T A L Y Choose quality. FIMA 1 AIR COMPRESSORS AND ACCESSORIES FIMA has been operating on the international market for over 15 years. Its staff has over 40
More informationOil / air cooler Series BLK-DC
Oil / air cooler Series BLK-DC maintenance friendly design broad performance range compact dimensions rugged cooling matrix low noise emissions comprehensive accessoires DE 35 0002 09/2000 Bühler Technologies
More informationCalculation of external available Pressure. 1. Criterion flow velocity (Ref. 20 C) Do not design units in conditions acc. to white areas!
Page 1 Standard Series Size: 3 Air flow volume Calculation of external available Pressure [m³/h] 3 4 5 55 6 65 7 75 8 9 1 11 12 1. Criterion flow velocity (Ref. 2 C) Do not design units in conditions acc.
More informationBy-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane
HYDRAULIC FILTRATION Spin-on, tank top return filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFPA T 3.10.17) Burst 20 bar (290 psi) (acc. to NFPA T 3.10.17) Connection Ports:
More informationCooler Bellhousing KPV series
Cooler Bellhousing KPV series» Dimensions acc. to VDMA 24 561» Rigid and noise damping versions in identical lengths» Easy replacement of rigid/dampened bellhousing acc. to VDMA 24 561» Optional combination
More informationGLOBAL STANDARD COOLER
GLOBAL STANDARD COOLER D D MOBILE HYDRAULIC OIL-TO-AIR COOLING SYSTEMS Product Information AKG-Line is a standard line of products from the market leader in high performance aluminium cooling systems.
More informationTechnical specification agenitor 404b NG
Technical specification agenitor 404b NG Design: 100 kw el. 60 Hz / 480 V natural gas Calorific Value = 990 BTU/ft³ NOx < 1.0 g/bhp-h Exhaust cooling to 248 F Altitude 0 ft 1 / 9 1. Genset 3 1.1 Engine
More informationTechnical specification agenitor 408 NG
Technical specification agenitor 408 NG Design: 360 kw el. 60 Hz / 480 V natural gas Calorific Value = 990 BTU/ft³ NOx < 1,0 g/bhp-h Exhaust cooling to 248 F Altitude 0 ft 1 / 9 1. Genset 3 1.1 Engine
More informationGLOBAL STANDARD COOLER
GLOBAL STANDD COOLER AKG 2009 (changes and errors expected) GLOBAL STANDD Rugged Environment COOLING SYSTEMS Product Information AKG CooL-Line is a standard line of products from the market leader in high
More informationGLOBAL STANDARD COOLER
GLOBAL STANDD COOLER AKG 2009 (changes and errors expected) GLOBAL STANDD RUGGED ENVIRONMENT COOLING SYSTEMS PRODUCT INFORMATION AKG CooL-Line is a standard line of products from the market leader in high
More informationNCF 60 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
More informationARW DRY COOLERS AXIAL FANS VERSION, MEDIUM AND HIGH CAPACITY. CAPACITY FROM 20 TO 775 kw ARW DRY COOLERS
DRY COOLERS AXIAL FANS VERSION, MEDIUM AND HIGH CAPACITY CAPACITY FROM 20 TO 775 kw 116 Packaged dry coolers with axial fans suitable for external installation. To be matched to the units series: RWE -
More informationPRESS G SERIES. Two Stage Light Oil Burners FIRING RATES
The PRESS G series of burners covers a firing range from 107 to 1660 kw and they have been designed for use in civil installations of average dimensions, like building areas and large apartment groups
More informationOil/Air Cooler Units
COMPLETE OIL / AIR COOLER SYSTEM WITH AXIAL FAN FOR INDUSTRIAL APPLICATIONS. General description In hydraulic systems energy is transformed and transmitted. During this process, efficiency losses occur,
More informationVIKING SG SERIES SEALLESS MAG DRIVE PUMPS
SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and
More information