Type 1031 Piston Rotary Actuators for POSI-SEAL Valves
|
|
|
- Adelia Snow
- 6 years ago
- Views:
Transcription
1 pril 1995 ulletin.1:1031 ype 1031 Piston Rotary ctuators for POS-SL Valves ype 1031 piston rotary actuators (see figure 1) are rugged, versatile units which provide a reliable method of opening and closing rotary valves. hese actuators utilize the efficient scotch yoke mechanism to transform linear movement of the piston into a 90 rotating movement for optimum break and run torque. Many different model number combinations of actuator sizes, cylinder diameters, and double acting or springreturn action are available for installation on valves through 7-inch size. hese actuators are designed for use over a wide range of pressures and temperatures. Double-acting actuators (see figure ) require pressure to rotate the valve in either direction. Spring-return actuators (see figure 3) require pressure to rotate the valve in one direction only and can be easily installed to open or close the valve on loss of air pressure. oth double-acting and spring-return actuators are available with either one cylinder or with two cylinders for higher torque. Power-actuated packages are available with a full line of accessories and options including position indicating switches, solenoids, supply pressure regulators, and positioners. Features otally Pre-ngineered Package components are sized and selected to suit specific applications. mounting and assembly is performed under strict quality assurance using suitable, heavy-duty materials and hardware. he actuator can be purchased by itself for mounting on other valves. On-Shelf vailability wide variety of actuators, valves, and accessories is readily available for custom configuration to specific customer needs. ase of nstallation he power-actuated package minimizes on-site and in-shop engineering and installation operations. o special mounting or assembly techniques are required. W / L Figure 1. ype 1031 ctuator Mounted on a Rotary Valve Fisher, Fisher-Rosemount, Managing he Process etter, and POS-SL are marks owned by Fisher Controls nternational, nc. or Fisher-Rosemount Systems, nc. other marks are the property of their respective owners. D Fisher Controls nternational, nc. 199, 1995; Rights Reserved
2 ulletin.1:1031 Specifications ctuator Sizes and Model umbers See figure Operating Pressure Maximum owable: Corresponds to maximum output torque. See tables 1 through Minimum Recommended: Depends on torque required. See tables 1 through Maximum Output orque See tables 1 through Material emperature Capabilities Standard: 0 to 00 F ( 9 to 93 C) Optional: 0 to 350 F ( 1 to 177 C) Maximum Valve Shaft Rotation 100 degree maximum actuator rotation can be limited with independent, externally adjustable travel stops. ravel stops are of sufficient size to absorb maximum torque output Valve Shaft Connection: See figures 5 through, dimension for acceptable valve shaft dimensions. ccepts a keyed shaft Construction Materials ody: Ductile iron Cylinder: Wrought carbon steel Piston: Ductile iron Seals: Standard: itrile igh emperature: Fluorocarbon uclear: PR (ethylene propylene rubber) Mounting racketry: Carbon steel Pressure Port Connections: See figures 5 through, dimension Stroking ime: Dependent on actuator size, rotation, and positioner if used. f stroking time is critical, consult your Fisher Controls sales office or sales representative pproximate Weights: See tables 5 and 6 ccessories Limit Switches: Models with SPD and DPD limit or position indicating switches are available. Solenoid Valves: Pneumatic input solenoid control valves and pilots are available for standard and failsafe configurations of double-acting and spring-return actuators Rugged Construction he two-piece cast housings provide protection and stability of internal parts. igh-grade alloy materials are used in all motion transfer components for precise and smooth operation at the full rated torque output. he actuators will withstand vibrations of most plant environments. Longer Service Life he rugged, self-enclosed construction, output shaft bearings, and chrome plated cylinder bore help provide longer life, consistency of operation, and corrosion resistance. Seismic Qualification ctuators have been seismically qualified for nuclear applications.
3 ulletin.1: / L Figure. Double-cting ctuators 93 / L Figure 3. Spring-Return ctuators 3
4 ulletin.1:1031 able 1. Operating Pressure, Psig, and orque Output, lbf in, for Double-cting ctuators CUOR OPR PRSSUR, PS MODL ORQU UMR orque Output, lbf in , ,50 10,60 6,65 13,630 7,10 1,610 35,370 19,00 51,70 9,00 7,500,00 91,5 9,60 10,730 59,00 10,15 10,965,55 157, , 55 1, ,70 1,010 35,65 1,60 36,50 19,570 7,610 5,510 65,370 37,300 99,750 57,000 13,150 65, ,000,005,10 130,95 351,055 00, , , ,90 1,500 3,065 17,935,750 3,370 3,50 5,050 57,10 3,650 79,660 5,500 11,570 69,00 17,70,5 16,095 9,600 7,60 15,735 7,5 3, , , ,50 1,590 37,10 0,90 9,75 7,65 51,150 9,30 66,660 3,090 9,370 53,900 1,010,310 17,10 9,50 19,00 109, ,30 190, , , , ,190 16,60,750 3,910 57,000 31,160 5,60 33,10,190 3, ,90 6, ,00 95,10 197,00 11,595,770 17,300 33,55 0, , , ,95 10,55 10, , ,70 10,90 0,330 11,60 1, , ,090 1,70 5,15 1,50,095 6,900 6,130 35,055 65,775 37,55 5,710,970 15,00 71,00 53,0 9,90 71,55 3,950 66,00 37,360 9,065,65 95,30 5,0 10,950 0, ,00 6,00 1,670 16,670 5,360 15,300 6,300 10,70 6,70 163,95 307,75 175,930
5 able. Operating Pressure, ar, and orque Output, m, for Double-cting ctuators ulletin.1:1031 CUOR OPR PRSSUR, R MODL ORQU UMR orque Output, m , , ,360 11,630 31,0 17, , , , ,50 1,70 39,660, , , ,310 10,60 31,500 17,930,30 7, , , ,0 11,130 1,690 1,390 37,30 1, , ,0 10,70,60 1,70 5,170 1,30 3,300, , , , , , ,00 1,310,70 16,0 7,30 15,900 3,00 1,50 3,70 19,0 5
6 ulletin.1:1031 able 3. Operating Pressure, Psig, and orque Output, lbf in, for Spring-Return ctuators CUOR OPR PRSSUR, PS MODL 0 (1) (1) 15 (1) UMR orque Output, lbf in, at nd of Stroke with Spring xtended 606 SR SR , SR ,170 1, SR ,10 1,0 15, SR ,390 16,00 0,50 5, SR 10,50 16,0 3,0 9, SR 13,50 1,730 30,900 3,630, SR 1,000 7,00 37,000 7,000 59, SR 3,500 36,010 9,000 60,000 7, SR 6,900 3,000 56,100 71, SR 35,600 5,000 7,600 7,100 1, SR,300 73,0 99,00 17, ,00 1. vailable on application. Contact your Fisher Controls sales office or sales representative. able. Operating Pressure, ar, and orque Output, m, for Spring-Return ctuators CUOR OPR PRSSUR, R MODL. (1) (1).6 (1) UMR orque Output, m, at nd of Stroke with Spring xtended 606 SR SR SR SR SR SR SR SR SR SR SR ,0 13, SR ,0 1,00 1,10 1. vailable on application. Contact your Fisher Controls sales office or sales representative. able 5. Weights for Double-cting ctuators CUOR W CUOR W MODL MODL UMR Pounds kg UMR Pounds kg
7 ulletin.1:1031 able 6. Weights for Spring-Return ctuators OPR PRSSUR, PS (R) CUOR 0 (.) 60 (.1) 0 (5.5) 100 (6.9) 15 (.6) MODL Weight UMR Pounds kg Pounds kg Pounds kg Pounds kg Pounds kg 606 SR SR SR SR SR SR SR SR SR SR SR SR SMPL CUOR MODL UMRS 5101SR060C1000, 5101D O: 1 SPRS FOR 60 D 0 PS R SDRD SOC MS. FOR OR PRSSURS COC FSR COROLS SLS OFFC OR SLS RPRSV OR FCORY FOR VLLY. VLL W RL FOR FLUR CO UPO LOSS OF LCRCY OR LOSS OF SUPPLY PRSSUR. 91- / L Figure. Size and Material Selection Codes Used for Determining ctuator Model umbers 7
8 ulletin.1:1031 C F (1) L M M O P P U () V () W () Y DMSO P CUOR MODL UMRS / x / / / x / / / x / / F/ is not symmetrical on actuator sizes 60 and 0.. Dimensions U, V, and W are typical dimensions. dditional accessory mounting holes have been added to the top housing surface / x / / / x / / L,M Y/ M C P Y SQ F/ F C C / L Figure 5. Dimensions, nches, for Double-cting ctuators
9 ulletin.1:1031 C F (1) L M M O P P U () V () W () Y DMSO P CUOR MODL UMRS / x / / / x / / / x / / / x / / / 1.50 x / / F/ is not symmetrical on actuator sizes 60 and 0.. Dimensions U, V, and W are typical dimensions. dditional accessory mounting holes have been added to the top housing surface / x / / / x / / / x / F U V,W U/ OP OF CUOR V,W U L,M M / L Figure 5. Dimensions, nches, for Double-cting ctuators (Continued) 9
10 ulletin.1:1031 C F (1) L M M O P P U () V () W () Y DMSO P CUOR MODL UMRS / x / / / x / / / x / / F/ is not symmetrical on actuator sizes 60 and 0.. Dimensions U, V, and W are typical dimensions. dditional accessory mounting holes have been added to the top housing surface / x / / / x / / L,M Y/ M Y SQ F/ F C / L Figure 6. Dimensions, mm, for Double-cting ctuators 10
11 ulletin.1:1031 C F (1) L M M O P P U () V () W () Y DMSO P CUOR MODL UMRS / x / / / x / / / x / / / x / / / x / / F/ is not symmetrical on actuator sizes 60 and 0.. Dimensions U, V, and W are typical dimensions. dditional accessory mounting holes have been added to the top housing surface / x / / / x / / x F U V,W U/ OP OF CUOR V,W U L,M M / L Figure 6. Dimensions, mm, for Double-cting ctuators (Continued) 11
12 ulletin.1:1031 C F (1) L M M O P P U () V () W () Y DMSO P OPR CUOR MODL UMRS PRSSUR, PS 606SR 607SR 3307SR 330SR 3310SR / x / / / x / / / x / / F/ is not symmetrical on actuator sizes 60 and 0.. Dimensions U, V, and W are typical dimensions. dditional accessory mounting holes have been added to the top housing surface / x / / / x / / L,M M Y/ Y SQ / L F/ F C C Figure 7. Dimensions, nches, for Spring-Return ctuators 1
13 ulletin.1:1031 DMSO C F (1) L M M O P P U () V () W () Y P OPR CUOR MODL UMRS PRSSUR, PS 331SR 51SR 5171SR 60171SR 511SR 6011SR 011SR / x / / / x / / / 1.50 x / / / x / F/ is not symmetrical on actuator sizes 60 and 0.. Dimensions U, V, and W are typical dimensions. dditional accessory mounting holes have been added to the top housing surface / x / / / x / / x / / F U V,W U/ OP OF CUOR V,W U L,M Y/ M Y SQ / L Figure 7. Dimensions, nches, for Spring-Return ctuators (Continued) 13
14 ulletin.1:1031 C F (1) L M M O P P U () V () W () Y DMSO P OPR CUOR MODL UMRS PRSSUR, R 606SR 607SR 3307SR 330SR 3310SR / x / / / x / / / x / / F/ is not symmetrical on actuator sizes 60 and 0.. Dimensions U, V, and W are typical dimensions. dditional accessory mounting holes have been added to the top housing surface / x / / / x / / L,M M Y/ Y SQ / L F/ F C C Figure. Dimensions, mm, for Spring-Return ctuators 1
15 ulletin.1:1031 DMSO C F (1) L M M O P P U () V () W () Y P OPR CUOR MODL UMRS PRSSUR, R 331SR 51SR 5171SR 60171SR 511SR 6011SR 011SR / x / / / x / / / x / / / x F/ is not symmetrical on actuator sizes 60 and 0.. Dimensions U, V, and W are typical dimensions. dditional accessory mounting holes have been added to the top housing surface / x / / / x / x / F U V,W U/ OP OF CUOR V,W U L,M Y/ M Y SQ / L Figure. Dimensions, mm, for Spring-Return ctuators (Continued) 15
16 ulletin.1:1031 R R SD (YPCL LL FURS) 663 / L Figure 9. Standard Mounting Positions for ype 1031 ctuator Ordering nformation For actuator sizing and selection refer to figure, which lists size and material selection codes for the actuator, and refer to echnical ulletins 1, Valve Sizing, and 1 ctuator Sizing For solenoid valve selection refer to Data Sheet D5 For limit switch selection refer to Data Sheet D51 For assistance in sizing, selection, pricing, and order placement contact your Fisher Controls sales office or sales representative with complete service conditions nstallation he standard actuator can be installed in any orientation. For installation orientation of actuators supplied with the hydraulic manual override, contact your Fisher Controls sales office or sales representative. Standard mounting positions are shown in figure 9. For information, contact Fisher Controls: Marshalltown, owa 5015 US Cernay 6700 France Sao Paulo 05 razil Singapore Printed in U.S..
Design A61D TriAx Triple Offset High Performance Butterfly Valve
pril 2000 ulletin 51.6:61D Trix Design 61D Trix Triple Offset High Performance utterfly Valve Description The Design 61D Trix is a triple offset disk HPV designed for rugged isolation service, available
jamesbury Bulletin A107-1 Issue 7/2006
1-SERIES PNEUMTIC CYLINDER CTUTORS 1-Series piston actuators are available in either doubleacting or spring-return versions. The Series 1C and 1J provide for mounting in accordance with ISO 5211/1. These
Type 1035/El-O-Matic Rack-and-Pinion Rotary Actuator
Product Bulletin Type 1035/El-O-Matic Rack-and-Pinion Rotary Actuator Type 1035/El-O-Matic double-acting and spring-return rotary valve actuators are compact, simply-designed control devices quality-engineered
CSY SERIES. Pneumatic Rotary. Actuator. Double-Acting or Spring-Return Torques up to 2,500,000 in-lb Modular Design
CSY SERIES Pneumatic Rotary Actuator Designed & engineered for severe-service applications Double-Acting or -Return Torques up to 2,500,000 in-lb Modular Design Design & Materials NAMUR Mounting Allows
Fisher 685SE and 685SR Piston Actuators
685SE and 685SR Actuators Product ulletin Fisher 685SE and 685SR Piston Actuators The 685SE and 685SR are medium to large spring-return, double-acting piston actuators that provide accurate, high thrust
Type 1051 and 1052 Diaphragm Rotary Actuators
June 1999 Bulletin 61.1:1051 Type 1051 and 1052 Diaphragm Rotary Actuators The Type 1051 and 1052 spring-return diaphragm rotary actuators (figure 1) operate splined shaft rotary valves, such as the edisc!
DFR Valve Actuator. Features. Model
Features Reliable esign The low-pressure diaphragm, fail-safe spring, and splined connection make for accurate and safe operation. Rugged Long Lasting Construction yna-flo s expert CNC machining process
Fisher 657 and 667 Diaphragm Actuators
657 and Actuators Product Bulletin Fisher 657 and Diaphragm Actuators Fisher 657 and spring-opposed diaphragm actuators position the valve plug in the valve in response to varying controller or valve positioner
Morin series B and C actuators. Series C
MORIN series - Ductile iron w/ stainless steel cylinders C series - Ductile iron w/ carbon steel cylinders Spring return and double acting actuators Quarter-turn output torques to 158200 Nm Features and
Type 1051 and 1052 Diaphragm Rotary Actuators
Product Bulletin 1051 and 1052 Actuators Type 1051 and 1052 Diaphragm Rotary Actuators The Type 1051 and 1052 spring-return diaphragm rotary actuators (figure 1) operate splined shaft rotary valves, such
Ductile Iron/Stainless Steel Cylinders Quarter-turn Spring Return and Double Acting Actuators Output Torques to 1,374,000 lb.in.
Features and enefits Ductile iron housing, piston and end caps provide long product life with durable, cost effective operation. Output shaft made of high strength alloy steel or 17-4PH stainless transmits
Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in. INTRODUCTION
VLVS & CONTROLS KYSTON PNUMTIC CTUTOR Spring Return and ouble cting Pneumatic Quarter-Turn ctuators For Output Torques to 27,624 lb.in. INTROUCTION For remote control of any quarter-turn application, including
350 Series Electrohydraulic Actuators
March 2000 350 Series Electrohydraulic Actuators 350 Series electrohydraulic actuators (figure 1) use a dc milliampere signal to operate a variety of slidingstem or rotary valves for proportional or two-position
470 Series Piston Actuators
January 000 Bulletin 61.:470 470 Series Piston Actuators The 470 Series pneumatic piston actuators (figure 1) are used in either throttling or on-off applications with control valves having 90.5 mm (3-9/16
3582 Series Pneumatic and Type 3582i Electro-Pneumatic Valve Positioners
April 1995 3582 Series Pneumatic and Type 3582i Electro-Pneumatic Valve Positioners The 3582 Series pneumatic valve positioners, shown in figure 1, and the Type 3582i electro-pneumatic valve positioners,
Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
Fisher 2625, 2625SST, and 2625NS Volume Boosters
2625, 2625SST, 2625NS Volume Boosters Product Bulletin Fisher 2625, 2625SST, and 2625NS Volume Boosters A Fisher 2625, 2625SST, or 2625NS volume booster is part of the 2625 Series volume boosters and is
Type 2625 and 2625NS Volume Boosters
Instruction Manual Form 5122 September 1997 Type 2625 and 2625NS Type 2625 and 2625NS Volume Boosters Contents Introduction............................... 1 Scope of Manual.............................
Morin series B and C actuators. Series C
MORIN series - Ductile iron w/ stainless steel cylinders C series - Ductile iron w/ carbon steel cylinders Spring return and double acting actuators Quarter-turn output torques to 1,400,000 lb.in. Features
Fisher 685 Piston Actuator
685 Piston Actuator Product Bulletin Fisher 685 Piston Actuator The 685 is a double-acting piston actuator that provides accurate, high thrust output for short to long travel applications. This actuator
Morin Figure HP Actuator
1,500 psig Operating Pressure Rating Direct Gas/Hydraulic ctuators Ductile Iron/Stainless Steel Quarter-turn Double cting and Spring Return Models Features and enefits High pressure construction eliminates
Fisher 3024C Diaphragm Actuator
3024C Actuator Product Bulletin Fisher 3024C Diaphragm Actuator The 3024C actuator is a compact spring opposed pneumatic diaphragm actuator incorporating a cast yoke mounting and is suitable for general
Scotch Yoke Actuators Spring return - Double acting
Scotch Yoke Actuators Spring return - Double acting 2 Econ Scotch Yoke actuators Scotch Yoke actuators Fig. 7991 Spring return - Fig. 7992 Double acting Proven quality since 1892 Econ has been offering
MT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
SY Series Scotch Yoke Actuators
SY Series Scotch Yoke Actuators Engineering Creative Solutions for Fluid Systems Since 1901 FEATURES MODULAR DESIGN The Pratt Industrial SY series scotch yoke actuator has a highly efficient and interchangeable
Type 3660 and 3661 Positioners
August 1998 Bulletin 62.1:3660 Type 3660 and 3661 Positioners The Type 3660 pneumatic (see figure 1) or Type 3661 electro-pneumatic, single-acting positioners are used with various actuators on sliding-stem
MTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2
Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber
Directional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold
POSI-SEAL HIGH PERFORMANCE BUTTERFLY VALVE CONTROL PACKAGE
POSI-SEAL HIGH PERFORMANCE BUTTERFLY VALVE CONTROL PACKAGE Performance & Reliability Fisher puts it all together for you in the POSI-SEAL Package (PSP). With the introduction of the POSI-SEAL Package (PSP),
Double Acting and Spring Return Direct Gas Quarter-turn Actuators Output Torques to 6,500,000 lb.in.
Biffi GIG/GIGS Direct Gas Actuators Double Acting and Spring Return Direct Gas Quarter-turn Actuators Output Torques to 6,500,000 lb.in. Features and Benefits Separate gas and hydraulic cylinders prevent
Morin series S actuator
MORIN Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 26890 Nm Features and benefits Innovative stainless steel construction as standard provides superior
Biffi Morin HP Series actuator
HP series - Direct gas / hydraulic actuator with ductile iron housing and carbon steel cylinders Spring return and double acting actuators Quarter-trun output torques to 240,000 lb. in. Features and benefits
Model DFR Valve Actuator
FEATURES Reliable Design The low-pressure diaphragm, fail-safe spring, and splined connection make for accurate and safe operation. Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process
Fisher Control-Disk Valve NPS 14-24
Control-Disk NPS 14-24 Valve Product ulletin Fisher Control-Disk Valve NPS 14-24 The Fisher Control-Disk valve provides outstanding performance under extreme pressure and temperature conditions. The Control-Disk
Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in.
Keystone Pneumatic Pneumatic ctuator ctuator Spring Return and ouble cting Pneumatic Quarter-Turn ctuators For Output Torques to 27,624 lb.in. Features and enefits Compact rack and pinion design utilizes
Fisher D and DA Control Valves
D and D Valves Product Bulletin Fisher D and D Control Valves Fisher D and D single port, high pressure valves are widely used in oil and gas production industries. These valves are especially useful for
FEATURES. Quadra-Powr torque outputs range from 11 to 587 FT LBS (15 to 796 N m), depending on actuator selection and available supply pressure.
QUDR-POWR X SPRING-DIPHRGM RORY CUORS Exclusively developed for quarter-turn valve service, spring-diaphragm actuators provide safe reliable operation even when minimal supply pressures are available.
Gas/Hydraulic Valve Operators. Safe and Efficient Gas Pipeline Control
Valve Operators Safe and Efficient Gas Pipeline Control Design and Construction Emerson Process Management Valve Automation is recognized worldwide for the reliability of its actuators under the most demanding
PNEUMATIC AND HYDRAULIC ACTUATORS
The art of power and perfection PNEUMATIC AND HYDRAULIC ACTUATORS The art of power and perfection ACTREG, established in 1992, is a multinational company specialised in the manufacture and sales of high
Full 316SS design Up to 70,000Nm in DA! High Temp ** Low Temp ** No Painting or ENP coating required ISO mounting NAMUR VDI/VDE
1 Full 316SS design Up to 70,000Nm in DA! High Temp ** Low Temp ** No Painting or ENP coating required ISO mounting NAMUR VDI/VDE Mineral Processing Oil and Gas Petro-chemical Desalination Coal washery
RPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16" to 2" bore Double acting pneumatic actuators
RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators 9/6" to 2" bore ouble acting pneumatic actuators elrin cetal Resin end cap cylinders for washdown, and corrosive environment application
BULLETIN B JANUARY DeZURIK ROTARY DIAPHRAGM ACTUATORS TECHNICAL SPECIFICATIONS
ULLETIN 70.00-1 JNURY 2017 DeZURIK ROTRY DIPHRGM CTUTORS TECHNICL SPECIFICTIONS Materials of Construction DR-40 Item Description Material 1 Diaphragm Cover 316 Stainless Steel, STM 240/276 13 15 20 5 29
Safe and Efficient Gas Pipeline Control
Safe and Efficient Gas Pipeline Control Bettis GH-Series Valve Operators Controls high pressure natural gas pipelines in remote locations and under severe climatic conditions Design and Construction Emerson
Model DFLP Linear Actuator
Features Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process and superior quality parts come together to make DFLP actuators a rugged, long lasting product. DFLP actuators are manufactured
Poppet Series Compressed Air & Vacuum
Poppet Series ompressed ir & Vacuum www.asco.com Table of ontents Poppet eatures and enefits ow to Order N Series - ompressed ir Valve Solenoid ir Pilot ctuated /8" to /8" Technical ata /8" to /8" imensions
GP & GH Range. Pneumatic and Hydraulic Actuators for Quarter-Turn Valves. Established Leaders in Actuation Technology
GP & GH Range Pneumatic and Hydraulic Actuators for Quarter-Turn Valves Established Leaders in Actuation Technology Rotork Actuators Quality Controlled Rotork is a global leader in valve actuation technology.
490 Series Actuators. 490 Series. Contents. Introduction
Instruction Manual Form 049 May 1992 490 Series 490 Series Actuators Contents Introduction.............................. 1 Scope of Manual............................. 1 Description..................................
LEDEEN GS Series. Pneumatic and hydraulic actuators
LEDEEN GS Series Pneumatic and hydraulic actuators LEDEEN GS Series Pneumatic and Hydraulic Actuators Typical application For on-off or modulating control of any quarter-turn operated valve Pneumatic quarter-turn
CONTROLS. S98 Pneumatic Actuator
R CONTROLS S98 Actuator Bray International Headquarters Office & USA Manufacturing Houston, Texas +281.894.5454 INTERNATIONAL, Inc. At Bray, our business is helping our customers with their flow control
Weir-Style Diaphragm Valves
www.swagelok.com Weir-Style Diaphragm s DW Series Standard valve sizes 1/2 to 4 in. and minivalve sizes 1/4, 3/8, and Manual and pneumatic actuation Kwik-Clamp, TS series sanitary clamp, and tube butt
BIFFI MORIN S SERIES ACTUATORS
Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 240,000 lb.in. FEATURES AND BENEFITS GENERAL APPLICATIONS For remote control of any quarter-turn application:
TN2000 Series Pneumatic Piston Actuators for 6" and 8" SPIRA-TROL Series Control Valves
Description The TN2000 series pneumatic piston actuators are designed for use with 6" and 8" SPIRA-TROL control valves. There are three versions available: Single-acting (with spring), Double-acting (with
PNEUMATIC CYLINDER ACTUATORS, SERIES B1
PNEUMATIC CYLINDER ACTUATORS, SERIES B1 Metso's Neles double acting and spring return B1-Series piston type actuators are designed for use in both modulating control and on-off service. The series B1C
UT SERIES PNEUMATIC ROTARY ACTUATORS
UT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
Master Flo Valve Inc.
Actuation Master Flo Valve Inc. Master Flo Valve Inc. is the technological leader and world-class manufacturer of surface and subsea chokes, specialty control valves and supporting actuation. Privately
SCOTCH YOKE ACTUATORS
TITOLO TITOLO SCOTCH YOKE ACTUATORS Heavy duty pneumatic actuators SHD and CHD series ATEX GOST -R Quality system: ISO 9000 Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Toll Free: 888.842.9998
Butterfly Valve - Series 200
utterfly Valve - Series 200 utterfly Valve design is the most common type of rotary valve and provides low weight to v Ratio combined with simplicity of design and comparatively low cost. It is a simple
Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"
Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated
Biffi Morin S series actuators
Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 26890 Nm Features and benefits General applications For remote control of any quarter-turn application:
GVI Series Industrial Globe Valves for Flow Control
Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They
R-type, RY-type EPR-Series. Actuators for Quarter-Turn Valves
R-type, RY-type EPR-Series Actuators for Quarter-Turn Valves >> Introduction The EPR-Series pneumatic actuator provides a rugged solution for quarter-turn actuation while reducing maintenance requirements.
Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet
Instruction Manual Form 5410 November 1998 Design CP/ENVIRO-SEAL Bellows Seal Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet Contents Introduction.............................. 1 Scope of
PNEUMATIC CYLINDER ACTUATORS, SERIES B1
PNEUMATIC CYLINDER ACTUATORS, SERIES B1 Metso's Neles double acting and spring return B1-Series piston type actuators are designed for use in both modulating control and on-off service. The series B1C
Design V250 Rotary Control Valve
Product Bulletin Design V250 Rotary Control Valve V250 Valve The Design V250 Hi-Ball rotary control valve (figure 1) is designed for heavy-duty throttling and on-off applications. Depending on size, this
Model 363 Control Valve
echnical Sales Bulletin February 0 P-363B0A Features Versatility Multiple port sizes make the 363 an easy valve to reconfigure when process applications change. Rugged Design Available severe service trim
Scotch Yoke Actuators 2016 EDITION. Heavy Duty Pneumatic Actuators SHD and CHD series. The Best Way To Automate Your Process.
The Best Way To Automate Your Process Heavy Duty Pneumatic Actuators SHD and CHD series Scotch Yoke Actuators 2016 EDITION Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Tel: +1.636.272.4934
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
VALV-POWR SERIES VPVL MODEL D DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS
VALV-POWR SERIES VPVL MODEL D DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS The Jamesbury Valv-Powr VPVL double-opposed piston actuators combine the benefits of high cycle
Design V150S Slurry Vee-Ball Control Valve
Product Bulletin Design V150S Slurry Vee-Ball Control Valve Slurry Vee-Ball Valve The Design V150S Slurry Vee-Ball valve shown in figure 1 mates with CL150 raised face flanges. Rugged construction, highly
Hydraulics 1. Directional Control Valves Series D1M. Features. Application. Operation. D1MW Solenoid Operated Free Lead Wire
ulletin 2544-1/US Introduction pplication arker D1M Series hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3 position styles. hey are
Vee-Ball Designs V150, V200 and V300 Rotary Control Valves
January 000 Bulletin 5.3:Vee-Ball Vee-Ball Designs V50, V00 and V300 Rotary Control Valves This bulletin covers the - through -inch, 3- through -inch Series B, and the 4- through 0-inch Designs V50, V00
31/32 Spring Diaphragm Rotary Actuators
GE Oil & Gas Technical Specifications 08/2012 Masoneilan * Valves 31/32 Diaphragm Rotary Actuators The 31/32 Series actuator is designed to provide high performance, reliability and long service life.
Fisher 480 Series Yokeless Piston Actuators
480 Series Actuators Product Bulletin Fisher 480 Series Yokeless Piston Actuators Fisher 480 Series actuators are yokeless piston actuators that are used in either throttling or on-off applications with
Stainless Steel Spring Return and Double Acting Pneumatic Quarter-turn Actuators Output Torques to 238,000 lb.in.
Stainless Steel Spring Return and Double cting Pneumatic Quarter-turn ctuators Output Torques to 238,000 lb.in. Features and Benefits Innovative stainless steel construction as standard provides superior
Fisher eplug complete Rotary Control Valve and Actuator Package
Product Bulletin D103196X012 eplug complete Fisher eplug complete Rotary Control Valve and Actuator Package...your complete control valve solution... simple...easy to select and install reliable...engineered
Specifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys
CONTROL VLVES KOSO HMMEL DHL B U L L E T I N V 5 0 / 5 0 - FETURES Globe bodies for in-line service; angle bodies for difficult service. Each body style accepts all standard trim sets. Balanced plugs for
Fisher 1052 Size 70 Diaphragm Rotary Actuator
1052 Actuator Product Bulletin Fisher 1052 Size 70 iaphragm Rotary Actuator Fisher 1052 size 70 spring return diaphragm rotary actuators operate splined shaft rotary valves, such as 8580, 852, 8590, V500,
MORIN. Pneumatic and hydraulic actuators EXPERIENCE MORE
MORIN Pneumatic and hydraulic actuators EXPERIENCE MORE Stainless steel quarter-turn actuators MORIN S Stainless steel spring-return and double-acting pneumatic quarter-turn actuators For remote control
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
SERIES M STANDARD FEATURES STANDARD OPTIONS. Double acting or spring return. Heavy duty housing, torque plug and piston rod design.
Torque Plug Ductile Iron Thrust Pin Bearing Cast Iron Piston Rod Cylinder Tube Piston Ductile Iron Spring Retainer Ductile Iron Spring End Cap Ductile Iron Cover Housing Ductile Iron Adjustable Stops Spring
Fisher 685 Piston Actuator
Instruction Manual 685 Piston Actuator Fisher 685 Piston Actuator Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 3 Principle of Operation...
Fisher 2052 Diaphragm Rotary Actuator
2052 Actuator Product Bulletin Fisher 2052 Diaphragm Rotary Actuator Fisher 2052 spring-and-diaphragm rotary actuators are used on rotary-shaft valve bodies for throttling or on-off applications. The 2052
Cipriani Harrison Valves Corp.
Shutoff & Divert Valve pplication Shutoff and divert valves are used in process flow systems for stopping or diverting the flow of liquid. variety of body configurations allows flexibility in designing
Poppet Valves How to Order... 3
Table of ontents Poppet Valves...-0 ow to rder.... N Series - Solenoid Pilot ctuated...4-8 /8" to /8" Technical ata... 4 /8 to /8 imensions.... 5 /" to -/" Technical ata.... 6 / to -/ imensions... 7-8
Fisher VBL Volume Booster
Instruction Manual VBL Volume Booster Fisher VBL Volume Booster Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 2 Installation... 4 Mounting...
Pneumatic rotary drive
Pneumatic rotary drive Modular program for mounting of quarter turn valves such as ball valves and butterfly valves NMUR and ISO 5211 interfaces Position feedback (including Ex-Versions) Type 2051 can
Directional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-2500/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3-position. hey are manifold mounted which
Fisher Rotary Valve Selection Guide
Rotary Valve Selection Guide Product Bulletin Fisher Rotary Valve Selection Guide W6539 W9415 W9418-2 V260 VALVE Vee-Ball VALVE Control-Disk VALVE TYPICAL Fisher ROTARY VALVES Control-Disk Valve Expanded
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICIONS D08H Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
Fisher 3610J and 3620J Positioners and 3622 Electro-Pneumatic Converter
360J and 3620J Positioners Product ulletin Fisher 360J and 3620J Positioners and 3622 Electro-Pneumatic Converter Fisher 360J, 360JP, 3620J, 3620JP, 362JP, and 3622 instruments are part of the 3600 series
CBA300 Series Pneumatic Actuators Improved Design - Compact, Lightweight To Suit All Applications And Environment
CBA300 Series Pneumatic Actuators Improved Design - Compact, Lightweight To Suit All Applications And Environment Design and Construction Emerson is the global leader in valve automation, providing reliable
Bellows-Sealed Valves
www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and
Directional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
CBB-Series Scotch-Yoke Pneumatic Actuators Improved Design - Compact, Lightweight To Suit All Applications And Environment
CBB-Series Scotch-Yoke Pneumatic Actuators Improved Design - Compact, Lightweight To Suit All Applications And Environment Design and Construction Emerson is the global leader in providing safe, reliable,
Fisher 1061 Pneumatic Piston Rotary Actuator with Style H & J Mounting Adaptations
Instruction Manual 1061 H & J Actuator Fisher 1061 Pneumatic Piston Rotary Actuator with Style H & J Mounting Adaptations Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...
UT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series
UT-**-D Series UT-**-SR Series full range of double acting and spring return actuators designed to NMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual adjustable
C Series Pneumatic Rack & Pinion Rotary Actuators
Allied Flow Controls, Inc. C Series Pneumatic Rack & Pinion Rotary Actuators Spring Return & Double Acting Features and Benefits Torque Range at 0 Psig Air Pressure: Double Acting: -,00 lbf-in Spring Return:
QUADRA-POWR X SPRING-DIAPHRAGM ROTARY ACTUATORS
QUR-POWR X SPRING-IPHRGM RORY CUORS Exclusively developed for quarter-turn valve service, Quadra-PowrX -diaphragm actuators provide safe and reliable operation even when minimal supply pressures are available.
Pneumatic Actuators. 1. DIE CAST ALUMINUM END CAPS: standard polyester powder coated
4 5 Pneumatic s 1 2 6 NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: standard (-4 F;+185 F), high (-4 F;+302 F), low (-40 F;+185 F) Pre lubricated for life of actuator at assembly 100%
Series Bloom TM Hydraulic Speed Reducers Standard Features. Hydraulic Speed Reducer. Powerful Compact Efficient
Series 1200 Hydraulic Speed Reducer The rugged construction and versatility of the Series 1200 Speed Reducer is ideal for stationary & mobile applications where slow speed, high torque, or variable speed