LKI LKI-HYD COOLING. Series. advanced quality customized designs made in europe. Oil/Air heat exchangers. Low noise level. High performance.
|
|
- Sabina Todd
- 6 years ago
- Views:
Transcription
1 advanced quality customized designs made in europe Oil/Air heat exchangers Series LKI For industrial use LKI-HYD For mobile use OIL-AIR COOLING Low noise level High performance Low cost The cut-away perspective shows the housing with thick steel walls aun high-performance cooling chamber incorporating copper pipes and aluminium cooling ribs.
2 Product description Product description With this new generation of Universal Hydraulik LKI oil-coolers, the manufacturers have succeeded in reducing the noise level. These coolers are ideally suited for stationary installations - for the cooling of hydraulic or lubricating oils. The range has been extended to include slowrunning ventilators, and the housings have been optimised, in order to produce the very low noise level. In order to make the cooler range as comprehensive as possible, the smaller models are also available as single or dual versions, thus covering oil-cooling requirements for both low and high oil throughflow volumes. The max. oil flow is reduced by 50% in the dual version and the cooler gets a slightly higher performance by this. The oil flow through one half of the cooler and then through the other half in the dual version. The oil stays longer in the cooler, which results in higher performances. The single version is ideal for higher oil volumes, to avoid too big pressure drops on the oil side. You can also see the differences in the performance data and the oil connections on the cooler drawings. Product highlights Testing pressure: 33 psi static according to DIN 500 Operating pressure: 232 psi (min. 2 Mill. Cycles from psi at 2 Hz and 0 F) Compact oil-cooler High cooling performance Low pressure loss Max. operating temperature: 2 F High flexibility 2 SAE flange from LKI 700 upward Cooling of: Oil, HFA, HFB, HFC, HFD-fluids up to v = 00 x 0 - m 2 /s, water/glycol min. 5:35 - under no circumstances water without corrosion prevention Coolant: air Variable motor; Hydro / 2/2V Option Testing pressure 50 psi Filter pad available on request Thermo-bypass Thermo-switch Cooling block in stainless steel ATEX series for use in potentially explosive environments Seawater version also available (off-shore) Materials STANDARD SEAWATER COOLING BLOCK Aluminium, RAL component paint HOUSING Steel, RAL 900 Electroplated FAN PPG SAFETY BARRIER Steel with blue-chrome finish FEET Galvanized
3 Performance Data LKI F ETD LKI-00-0V- 22. LKI-00-0V LKI-90-0V- 20. LKI-90-0V- 9. LKI-0-0V-. LKI-0-0V- 7. LKI-70-0V-. LKI-70-0V LKI-20-0V-. LKI-0-0V LKI-520-0V- 2. LKI-50-0V-. LKI-50-0V- 0. LKI-20-0V- 9. LKI-0-0V-. LKI-320-0V- 7. LKI-30-0V-. LKI-30-0V- 5. LKI-220-0V-2. LKI-20-0V-2 3. LKI-20-0V-2 2. LKI-0-0V-2. LKI-0-0V GPM The calculation of the specific cooling performance is based on an oil temperature of 0 F, an ambient temperature of F and therefore a temperature difference of 72 F. The figures apply to ISO VG32 hydraulic oil with 30 cst. For variances, Δp is multiplied by the correction factor f from the diagram on Page 3.
4 LKI-00/200 Oil In LKI 20/220 Oil Out G" G" 9,5 Motor 0,5; 2-pol Nema Frame Size 5C 3,70 LKI 20/220 9,5 Motor 0,33; -pol 2, LKI 0/20,9 Nema Frame Size 5C,93,7 Oil In LKI 0/20 G" 2,20 3,23 Ø0,33 0,7 3,7 0,7 LKI 00-00: lateral internal-thread oil connections min - m/7m (dba) LKI-0-0V / LKI-20-0V / LKI-0-0V / LKI-20-0V / LKI-20-0V / LKI-220-0V / LKI-20-0V /50 LKI-220-0V /50
5 LKI-300/00 Oil In LKI 320/20 G" Oil Out G" 9,5 Motor 0,5; -pol Nema Frame Size 5C 3,70 LKI 0/20 2, LKI 30/320,07 9,5 Motor 0,5; -pol Nema Frame Size 5C 22, Oil In LKI 30/0 G" 7,72,7 Ø 0,33 0,7 0,7 3,7 LKI 00-00: lateral internal-thread oil connections min - m/7m (dba) LKI-30-0V /5 55 LKI-320-0V /5 55 LKI-0-0V /3 7 LKI-20-0V /3 7
6 LKI-500/00 Oil In LKI 520/20 G /2" Oil Out G /2",5 Motor ; -pol Nema Frame Size 3TC 3,70 LKI 0/20 2, LKI 50/520 9,5 9,5 Motor 0,5; -pol Nema Frame Size 5C 2 2,02 Oil In LKI 50/0 G /2" 2, 25,3 Ø 0,33 0,7 0,7 3,7 LKI 00-00: lateral internal-thread oil connections min - m/7m (dba) LKI-50-0V /70 LKI-520-0V /70 LKI-50-0V /57.5 LKI-520-0V /57.5 LKI-0-0V /70 0 LKI-20-0V /70 0 LKI-0-0V /57 0 LKI-20-0V /57 0
7 LKI ,3 3,9,92 3,70 3,39, Motor,5; -pol Nema Frame Size 2TC 3, Motor ; -pol Nema Frame Size 2T Oil-Out Oil-In 0,7,9 3, 3,03 G/2" 2,9 30,2 Ø 0,33 0,7 0,7 23,23 LKI : lateral internal-thread oil connections and SAE flange at front or rear min - m/7m (dba) LKI-70-0V / 20 LKI-70-0V /5 20
8 LKI-00 39,37 35,3 33, 3,70 3,39 3,5 Motor 2; -pol Nema Frame Size TC 3, Motor ; -pol Nema Frame Size 2T Oil-Out 0,59 2, Oil-In 39,25 3,03 G/2" 32,7 3,0 Ø 0,33 0,7 0,7 23,23 LKI : lateral internal-thread oil connections and SAE flange at front or rear min - m/7m (dba) LKI-0-0V / 2.5 LKI-0-0V /0 2.5
9 LKI-900 3,3 39,7 37,0 3,70 3,39,2 Motor 5; -pol Nema Frame Size 25TC,3 Motor 2; -pol Nema Frame Size 23T Oil-Out 0,7 25,2 Oil-In 3,3 3,03 G/2" 3, 37,99 Ø 0,33 0,7 23,23 0,7 LKI : lateral internal-thread oil connections and SAE flange at front or rear min - m/7m (dba) LKI-90-0V / LKI-90-0V /
10 LKI-000 7,2 3,70,73 3,70 3,39,2 Motor 5; -pol Nema Frame Size 25TC,3 Motor 2; -pol Nema Frame Size 23T Oil-Out 0,7 27,3 Oil-In 3,03 G/2" 0,75,93 Ø 0,33 0,7 0,7 23,23 LKI : lateral internal-thread oil connections and SAE flange at front or rear min - m/7m (dba) LKI-00-0V /7 3 LKI-00-0V / 333
11 Hydraulic Motor Information ccm 22 ccm min - P (PSI) V (GPM) P (PSI) V (GPM) LKHYD-0-X LKHYD-20-X LKHYD-0-X LKHYD-20-X LKHYD-20-X LKHYD-220-X LKHYD-20-X LKHYD-220-X LKHYD-30-X LKHYD-320-X LKHYD-30-X LKHYD-320-X LKHYD-0-X LKHYD-20-X LKHYD-0-X LKHYD-20-X LKHYD-50-X LKHYD-520-X LKHYD-50-X LKHYD-520-X LKHYD-0-X LKHYD-20-X LKHYD-0-X LKHYD-20-X LKHYD-70-X LKHYD-70-X LKHYD-0-X LKHYD-0-X LKHYD-90-X LKHYD-90-X LKHYD-00-X LKHYD-00-X
12 advanced quality customized designs made in europe Ordering code LKI - 0-0V G - L Application Cooler for industrial use = LKI Mobile cooler * = LKM Cooler with hydraulic motor = LKHYD *(on request) Unit Size Version Way = 0 2 Way = 20 - = Standard L = flat version, no feet, with mounting - = Standard G 90 = Cooling block turned 90 G 0 = Cooling block turned 0 / Revolutions per minute (0Hz) 2 = 2 pole / 300 = pole / 00 = pole / 200 = pole / 50/0 Motor type 0 V = /0 V or 230/0 V 5 V = 5/ V HYD = ccm Hydraulic motor HYD 22 = 22 ccm Hydraulic motor Motors with special voltages, hydraulic and explosion protection available on request. All motors comply with EISA regulations. The technical data of this sheet is depending on the described operational conditions and individual cases. At different operational conditions and differing individual cases contact UniversalHydraulik. Technical modifications reserved. Please also pay attention to our operation manuals and maintenance documentations. Sales UH-073 Universal Hydraulik GmbH Siemensstr. 33. D-27 Neu-Anspach Tel: 00/9-0. Fax 00/90220 e Mail info@universalhydraulik.com US-Importer: IC Fluid Power Inc. 3 Dixie Highway. 30 Rossford, Ohio Tel: Fax e Mail us@icfluid.com
Oil/air cooler BLK ATEX-3GD
FluidControl Oil/air cooler BLK ATEX-3GD Drives and hydraulic aggregates are also used in explosive areas in machine construction or raw material production. In hydraulic systems oil transfers power and
More informationOil/air cooler BLK. Fluidcontrol
Fluidcontrol Oil/air cooler BLK Drives and hydraulic aggregates are used in machine construction, raw material production, maritime and many other areas. In hydraulic systems oil transfers power and motion,
More informationOil/air cooler BLK. Fluidcontrol
Fluidcontrol Oil/air cooler BLK Drives and hydraulic aggregates are used in machine construction, raw material production, maritime and many other areas. In hydraulic systems oil transfers power and motion,
More informationGLOBAL STANDARD COOLER
GLOBAL STANDD COOLER AKG 009 (changes and errors expected) Sales@SouthwestThermal.com p. 888-6-8 f. 80-484-0049 www.akgcoolers.com GLOBAL STANDD Rugged Environment COOLING SYSTEMS Product Information AKG
More informationGLOBAL STANDARD COOLER
GLOBAL STANDD COOLER AKG 2009 (changes and errors expected) GLOBAL STANDD Rugged Environment COOLING SYSTEMS Product Information AKG CooL-Line is a standard line of products from the market leader in high
More informationGLOBAL STANDARD COOLER
GLOBAL STANDD COOLER AKG 2009 (changes and errors expected) GLOBAL STANDD RUGGED ENVIRONMENT COOLING SYSTEMS PRODUCT INFORMATION AKG CooL-Line is a standard line of products from the market leader in high
More informationDCS- series. Classic
DCS- series Classic Classic standard models 80 HEAT REJECTION HP @ 100F ETD 70 60 50 40 30 20 10 0 DCS60 DCS45 DCS30 DCS20 DCS16 DCS10 0 10 20 30 40 50 60 70 80 90 OIL FLOW - GPM Specifications: Maximum
More informationGLOBAL STANDARD COOLER
COOLER RUGGED ENVIRONMENT COOLING SYSTEMS PRODUCT INFORMATION AKG CooL-Line is a standard line of products from the market leader in high performance aluminum cooling systems. AKG is best known for its
More informationGLOBAL STANDARD COOLER
GLOBAL STANDARD COOLER A A OIL-to-AIR COOLING SYSTEMS WITH AC-MOTOR Product Information AKG-Line is a standard line of products from the market leader in high performance aluminium cooling systems. AKG
More informationBYPASS SERIES GLOBAL STANDARD COOLER
BYPASS SERIES GLOBAL STANDARD COOLER OIL-to-AIR COOLING SYSTEMS WITH integrated Bypass and AC-MOTOR Product Information AKG-Line is a standard line of products from the market leader in high performance
More informationHEAT EXCHANGERS AIR/OIL TYPE LAC. - ATEX Version. Approved for applications where there may be an explosive environment above ground.
Heat exchangers Air/Oil LAC - LAC with AC Motor for Industrial Use - Maximum cooling capacity 300 kw Heat exchangers Air/Oil LAC-X - ATEX Version. Approved for applications where there may be an explosive
More informationAKG 2009 (changes and errors expected) HC- series. Classic
AKG 2009 (changes and errors expected) Classic performance hc @ 1750 RPM FAN SPEED HEAT REJECTION Horsepower Removed @ 100-F ETD 640 320 160 80 40 20 10 HC26 @ 3450 RPM HC14 @ 3450 RPM HC66 HC48 HC32 HC240
More informationOil / air cooler Series BLK-DC
Oil / air cooler Series BLK-DC maintenance friendly design broad performance range compact dimensions rugged cooling matrix low noise emissions comprehensive accessoires DE 35 0002 09/2000 Bühler Technologies
More informationGLOBAL STANDARD COOLER
GLOBAL STANDD COOLER GLOBAL STANDD RUGGED ENVIRONMENT COOLING SYSTEMS PRODUCT INFORMATION AKG CooL-Line is a standard line of products from the market leader in high performance aluminium cooling systems.
More informationGLOBAL STANDARD COOLER
COOLER H H OIL-To-AIR COOLING SYSTEMS WITH HYDRAULIC MOTOR Product Information AKG-Line is a standard line of products from the market leader in high performance aluminium cooling systems. AKG is best
More informationAKG 2009 (changes and errors expected) GLOBAL STANDARD COOLER
AKG 2009 (changes and errors expected) GLOBAL STANAR COOLER GLOBAL STANAR OIL-TO-AIR COOLING SYSTEMS WITH C-MOTOR PROUCT INFORMATION AKG CooL-Line is a standard line of products from the market leader
More informationGLOBAL STANDARD COOLER
GLOBAL STANDARD COOLER D D MOBILE HYDRAULIC OIL-TO-AIR COOLING SYSTEMS Product Information AKG-Line is a standard line of products from the market leader in high performance aluminium cooling systems.
More informationAKG 2009 (changes and errors expected) GLOBAL STANDARD COOLER
KG 2009 (changes and errors expected) GLOBL STNDRD COOLER GLOBL STNDRD OIL-TO-IR COOLING SYSTEMS WITH C-MOTOR PRODUCT INFORMTION KG CooL-Line is a standard line of products from the market leader in high
More informationOFFLINE SERIES GLOBAL STANDARD COOLER
OFFLINE SERIES GLOBAL STANDARD COOLER OIL-TO-AIR COOLING SYSTEMS WITH AC-MOTOR AND PUMP Product information AKG-Line is a standard line of products from the market leader in high performance aluminium
More informationGLOBAL STANDARD COOLER
COOLER OIL-To-AIR COOLING SYSTEMS WIT YDRAULIC MOTOR Product Information AKG CooL-Line is a standard line of products from the market leader in high performance aluminum cooling systems. AKG is best known
More informationAir Cooler Industry AC-LN 8-14 / ACA-LN 8-11 / ACAF-LN 8-11
Air Cooler Industry AC-LN 8-14 / ACA-LN 8-11 / ACAF-LN 8-11 Symbol General The AC-LN 8-14 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers
More informationOff-line filter / cooler unit FGSL
Fluidcontrol Off-line filter / cooler unit FGSL Coolers are used to stabilise the operating temperature in hydraulic and lubrication systems. This can be implemented particularly cost-efficiently by integrating
More informationFluid Cooling Mobile AOHM / AOVHM Series
Fluid Cooling Mobile Series 0916 Performance Notes AO/AOVH Series with hydraulic motor Adjustable louvers (manual) High heat removal Heavy duty construction Wide flow range Heat removal up to 210,000 BTU/HR
More informationA global leader in manufacturing highly engineered heat transfer technologies
OCA SERIES A global leader in manufacturing highly engineered heat transfer technologies Brazed Aluminum Oil Coolers Thermal Transfer Products introduces a new line of high performance oil coolers featuring
More informationA-L A C AIR OIL COOLER LUFT/ÖL-KÜHLER OLAER COOLERS. Olaer A-LAC with A.C. motors for industrial hydraulic systems
OLAER A-L A C COOLERS AIR OIL COOLER Olaer A-LAC with A.C. motors for industrial hydraulic systems Olaer A-LAC with A.C. motors for industrial hydraulic systems LUFT/ÖL-KÜHLER Oiltech LAC mit Wechselstrommotor
More informationAKG 2009 (changes and errors expected) AKG 2010 (changes and errors expected) Water Cooled
AKG 2009 (changes and errors expected) AKG 2010 (changes and errors expected) Water Cooled AKG/P Series Performance Data AKG/P 400 AND AKG/P 410 20 400 SERIES 70 410 SERIES 15 10 5 0 400-10 400-20 400-30
More informationCirculation pumps BFP-ATEX-T3/T4
Circulation pumps BFP-ATEX-T3/T F ATEX - range of use: to zone 1 and zone 1 T3 to zone 1 and zone 1 T Low noise emission High vol. efficiency Optimum suction Gerotor principle Resistant to contamination
More informationOff-line filter / cooler unit BKF
FluidControl Off-line filter / cooler unit BKF In hydraulic systems oil transfers power and motion, and in drives it s a vital lubricant. Both as a power transfer medium and as a lubricant, oil is heated
More informationOFFLINE SERIES GLOBAL STANDARD COOLER. p f
OFFLINE SERIES GLOBAL STANDARD COOLER Sales@SouthwestThermal.com p. 888-6-8 f. 80-484-0049 www.akgcoolers.com OIL-to-AIR COOLING SYSTEMS Product Information AKG Offline Series, based on AKG Cool-Line Series,
More informationSERIES. Dirty Environment Oil Coolers ACD
ACD Dirty Environment Oil Coolers SERIES Low Fouling Series with Non-Louvered Fin Design Standard s with Higher Speed Fans for Compact, Most Economical Selection Low Noise s with Slower Fan Speeds for
More informationOil/Air Cooler Units. Standard series OK-P type. Test procedure certified following EN
COMPLETE OIL / AIR COOLER WITH AXIAL FAN FOR INDUSTRIAL APPLICATIONS. Application These high performance coolers with axial fans are suitable for hydraulic cooling applications. Typical applications include:
More informationNISSENS COOLING SOLUTIONS. Cooling for Industrial Applications Solutions and Technologies
NISSENS COOLING SOLUTIONS Cooling for Industrial Applications Solutions and Technologies World-Class Customization for Any Product Application PLATE & BAR COOLERS Throughout 90 years, Nissens has built
More informationFluid Cooling Industrial COLW Series
Fluid Cooling Industrial COLW Series 0916 COPPER & STEEL CONSTRUCTION Performance Notes Ideal for independent cooling and filtering of system oils Utilizes a high efficient EK series shell & tube (finned
More informationOff-Line Filter BNF. FluidControl
FluidControl Off-Line Filter BNF In hydraulic systems oil transfers power and motion, and in drives it s a vital lubricant. Both as a power transfer medium and as a lubricant, oil is heated by friction
More informationOil/Air Cooler Units. Compact application with AC Motor OK-ELC Type. Test procedure certified following EN 1048
COMPACT OIL / AIR COOLERS NEW COMPACT DESIGN WITH AC ELECTRIC FANS AND HIGH COOLING PERFORMANCE Application These coolers are designed specifically for hydraulic applications where high performance and
More informationNISSENS HP COOLERS SERIES
www.nissens.com NISSENS HP COOLERS SERIES THE HP-SERIES FROM NISSENS The HP-series from Nissens is a wide range of standard products for efficient cooling of both water and oil applications. HP is short
More informationGLOBAL STANDARD COOLER
GLOBL STNDRD COOLER GLOBL STNDRD OIL-TO-IR COOLING SYSTEMS WITH C-MOTOR PRODUCT INFORMTION KG CooL-Line is a standard line of products from the market leader in high performance aluminium cooling systems.
More informationTHERMAL SYSTEMS, INC.
C Oil Coolers SERIES World Class Advanced Technology Design Rugged Bar and Plate Construction Protects Against Fin Damage Competitive Pricing, Deliveries From Stock Leak Free SAE O-Ring Oil Connections,
More informationPROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL
PROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL 1.1 SUMMARY A. Packaged Chillers offer a self-contained means of producing cooling liquid primarily
More informationGLOBAL STANDARD COOLER
GLOBAL STANAR COOLER GLOBAL STANAR MOBILE HYRAULIC OIL-TO-AIR COOLING SYSTEMS Product Information AKG-Line is a standard line of products from the market leader in high performance aluminium cooling systems.
More informationP-BAR CROSSOVER GUIDE SERIES METRIC. Standard Hydraulic Oil Coolers for Mobile & Industrial Applications Aluminum Plate & Bar Core Construction
2011 P-BAR SERIES Standard Hydraulic Oil Coolers for Mobile & Industrial Applications Aluminum Plate & Bar Core Construction Mobile MA Industrial BOL Industrial AOL P-BAR SERIES METRIC CROSSOVER GUIDE
More informationGLOBAL STANDARD COOLER
COOLER OIL-To-AIR COOLING SYSTEMS WIT YDRAULIC MOTOR Product Information AKG-Line is a standard line of products from the market leader in high performance aluminium cooling systems. AKG is best known
More informationPlate Heat Exchangers
Plate Heat Exchangers General Plate heat exchangers are used wherever thermal energy (heat) has to be transferred from one fl uid to another. The advantage is that they can maintain the fl uid temperature
More informationFeed Pumps VP / VPB / VPBM
Feed Pumps VP / VPB / VPBM Symbol General The feed pumps from the VP series are low-noise, single-stroke vane pumps with constant flow rate. Using a damped bell housing (PT) enables noise levels to be
More informationSolenoid valve VDHT standard BSP (British Standard Pipe)
Technical data sheet standard BSP (British Standard Pipe) danfoss.high-pressurepumps.com 521B1166 / DKCFN.PD.043.A1.02 Index 3. Picture Overview 4. Features 5. Technical data 6. Technical data 7. General
More informationOil/Air Cooler Units. Standard series EL Type. Test procedure certified following EN 1048
COMPLETE OIL / AIR COOLER SYSTEM WITH AXIAL FAN FOR INDUSTRIAL APPLICATIONS. Application These high performance coolers with axial fans are suitable for hydraulic cooling applications with both return
More informationOil Coolers New DCS Dual Fan models for 45HP and 60HP cooling performance
DC/DCS Oil Coolers New DCS Dual Fan models for 45HP and 60HP cooling performance All DC/DCS and Dual Fan models available with internal pressure bypass DC Motor Driven Cooling Fans Are A Low Cost Solution
More informationReturn Line Filter RF
Return Line Filter up to 15000 l/min, up to 25 bar 30 60 110 160 240 330 450 580 660 950 1300 2500 4000 5200 6500-7800 15000 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings
More informationOil/Air Cooler Units. Mobile application and Hydraulic motor OK ELH Type. Test procedure certified following EN 1048
MOBILE OIL / AIR COOLERS NEW COMPACT DESIGN WITH HYDRAULIC MOTOR AND HIGH COOLING PERFORMANCE Application These coolers are designed specifically for mobile hydraulic applications where high performance
More informationhore PRODUCT CATALOGUE nd Offsh arine an ms for Ma & Refrig CENTRIFUGAL FANS HV VAC &
hore nd Offsh arine an ms for Ma geration System & Refrig HV VAC & PRODUCT CATALOGUE CENTRIFUGAL FANS ! "# $ % & " ' (! ) * +,+( -../01..2 PRODUCT CATALOGUE 73-16 CENTRIFUGAL FANS CONTENT PAGE 1. CENTRIFUGAL
More informationSpecification. Oil/Air- Cooling Systems AKG-Range T1 - T11. AKG A World Class Supplier
(T) Oil/Air- Cooling Systems AKG-Range T - T LOCATION AKG INTERNATIONAL TELEPHONE FAX AKG Fellow Subsidiaries (Germany) Hofgeismar Autokühler GmbH & Co. KG (49) 5 67-88 3- (49) 5 67-35 82 Hofgeismar AKG
More informationMultiple disc brakes. pressure released and spring operated multiple disc brakes series LBD T brake. Installation- operating instructions
Multiple disc brakes pressure released and spring series LBD T brake = 50 Nm - 6300 Nm for dry or wet operation as well as for hardly combustible hydraulic fluids HFA, HFB, HFC and HFD Installation- operating
More informationAKG A World Class Supplier. Your innovative partner to design and supply engineered cooling packages
LOCATION TELEPHONE FAX AKG Fellow Subsidiaries (Germany) Hofgeismar Autokühler GmbH & Co. KG +49 5 67-88 3- +49 5 67-35 82 Hofgeismar AKG Thermotechnik International +49 5 67-88 3- +49 5 67-35 82 GmbH
More informationCooling Systems FLKS - 3S/1.0/W... FLKS - 3L/1.0/W DESCRIPTION
Cooling Systems FLKS - S/1.0/W... FLKS - L/1.0/W... 1. DESCRIPTION 1.1. APPLICATIONS Cooling circuits: Cooling of AC main drives Cooling of motor spindles on machining centres Cooling of transmission and
More informationOil/Air Cooler Units. Mobile series with DC motor OK-ELD Type. Test procedure certified following EN 1048
MOBILE OIL / AIR COOLERS NEW COMPACT DESIGN WITH DC ELECTRIC FANS AND HIGH COOLING PERFORMANCE Application These coolers are designed specifically for mobile hydraulic applications where high performance
More informationCompact hydraulic power unit Type BKA
Compact hydraulic power unit Type BKA Single- and two-stage up to 700 bar Features Compact design Self-venting Various combinations possible Single- or two-stage models Design Integrated low-pressure unloading
More informationOil/Air Cooler Units. Compact application with AC Motor OK-ELC Type
COMPACT OIL / AIR COOLERS NEW COMPACT DESIGN WITH AC ELECTRIC FANS AND HIGH COOLING PERFORMANCE Application These coolers are designed specifically for hydraulic applications where high performance and
More informationInstallation and commissioning of Settima screw pumps. Type GR** SMT** 3-screw screw pumps. a. Medium:
Settima screw a. Medium: HL oil conforming to DIN 51524 Parts 2 and 3 Special media such as: HFA min 5% oil HFB min 40% oil HFC max. 35-55% water HFDR high-viscosity lubricants SKYDROL, MIL-H may also
More informationThe Professional Choice. OHP Screw pump. OLAER OHP High Performance Pump
The Professional Choice OHP Screw pump OLAER OHP High Performance Pump Olaer is a global player specialising in innovative, efficient system solutions for temperature optimisation and energy storage. All
More information3-Way Temperature Control Valve
3-Way Temperature Control Valve Model G, Versions GEF, GPD and Accessories Typical applications For engines, turbines, gearboxes and heat exchangers: Charge air cooling Secondary cooling systems Fuel and
More informationType KKP. Combination pumps
Features Compact and light Integrated low-pressure unloading valve and fail safe valve (not suitable for continuons rating) Can be started in maximum pressure mode Self-priming Direct installation of motor
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationOil Filter Module Pi 8300
Oil Filter Module Pi 8300 Volume flow 1 und 220 l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
More information1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationOil Filter Module Pi 8300
Oil Filter Module Pi 8300 Volume flow 1 und 220 l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
More informationAXIAL FANS Catalogue CN0050C01 May 2008
ADTA AXIAL FANS Catalogue CN0050C01 May 2008 ADTA AXIAL FANS Catalogue CN0050C01 May 2008 Construction Specifications Impellers: Breezax aerfoil blades are available in four types of material: Glass Reinforced
More informationAir Cooler Mobile OK-ELD 0-6 with DC motor
ir ooler Mobile OK-ELD 0-6 with D motor Symbol General The OK-ELD air cooler series is designed specifically for mobile hydraulic applications where high performance and efficiency are required and physical
More informationCooling Systems CC Series TT rail 20/30lpm
CC Series 20/30lpm General Data And Details The oil / air coolers of our CC series are autonomous cooling systems with an integrated circulation pump. They work as a separate cooling unit or as a ilter
More informationCompressor Aftercoolers GLOBAL STANDARD COOLER
Compressor Aftercoolers GLOBAL STANDARD COOLER air/air HeAT EXCHANGERS WITH ac-motor product Information The AKG-Line (Compressor Aftercooler) was specially developed in order to cool down compressed air.
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
More informationIPCA Medium-pressure Internal Gear Pumps Technical Data Sheet
IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet Design and Function 1 7 6 5 9 2 6 5 7 8 2 1 4a 4b 3 1 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More information1SV (e-sv) 50 Hz 2900 RPM
DIMENSIONS AND ENGINEERING PAGE 37 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationPS/PSL Centrifugal pumps
1 14 EN Centrifugal pumps Technical Data Delivery rate Q max = 1250 l/min Delivery head H max = 110 m Delivery temperature T = 0 C to + C Kinematic viscosity ν max = 30 mm 2 /s Quality Management DIN EN
More informationSuction Filter SF/SFM/SFF and Suction Filter Elements S/S..
Suction Filter /M/F and Suction Filter Elements S/S.. up to 500 l/min Filters: 60 110 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The
More informationA-L O C COOLING SYSTEM OLAER COOLERS. Olaer A-LOC with integrated circulation pump for industrial hydraulic systems
OLAER A-L O C COOLERS COOLING SYSTEM Olaer A-LOC with integrated circulation pump for Olaer A-LOC with integrated circulation pump for industrial hydraulic systems R OLAER A-LOC FOR OPTIMUM EFFICIENCY
More informationReturn line and Suction Boost Filter RKM
Return line and Suction Boost Filter up to 850 l/min, up to 10 bar 80 100 120 151 201 251 201/-TH 300 350 400 800 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
More informationInline filters NF NF 1350 NF 330 NF 750 NF 500 NF FILTER SPECIFICATIONS Nominal pressure
Inline filters up to 3500 l/min, up to 25 bar 160 240 280 330 500 750 950 1350 2650 on request 1310 2.x on request 2610 2.x 1340 2640 5240 7840 10440 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
More informationChange-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
More informationAir Cooled Exchangers With Aluminium Cooling Elements
AIR COOLED Versacool Series Cooler AC electric models deliver more air flow resulting in greater performance while using a smaller diameter lower noise fan. Cylindrical air jet discharge pattern eliminates
More informationExplosion-Protected Pressure Switches
Explosion-Protected Pressure Switches To new ATEX Standard TECHNICAL DATA 0165 0340 0341 Degree of protection: IP 65 ATEX protection zone: 1 22 22 Switching power: 1 A / 250 VAC 0.25 A / 250 VDC 2 A /
More informationInternal Gear Unit. for motor/pump function Series QXM. Reference: 100-P US-10 1/18. Issue:
Internal Gear Unit for motor/pump function Series QXM Reference: 1-P-63-US-1 Issue: 1.218 1/18 2/18 1-P-63-US-1/1.218 Contents Page 1 General... 5 1.1 Product description... 5 1.2 Advantages... 5 1.3 Application...
More informationReturn Line Filter HF4R up to 450 l/min, up to 10 bar
Return Line Filter HF4R up to 450 l/min, up to 10 bar 9" 18" 27" 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international regulations.
More informationReturn Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 210 270 330 500 600 661 851 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
More informationChange-Over Inline Filter RFLD Welded Version
Change-Over Inline Filter RFLD Welded Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
More informationAir Cooled Exchangers With Aluminium Cooling Elements
AIR COOLED Versacool Series Cooler AC electric models deliver more air flow resulting in greater performance while using a smaller diameter lower noise fan. Cylindrical air jet discharge pattern eliminates
More informationSmall centrifugal fans made of plastic
Small centrifugal fans made of plastic durable application-optimised wide range of variants 2 Small centrifugal fans made of plastic Index Small centrifugal fans made of plastic HF R 75-16 D and HF R 110-18
More informationLOW STATIC FAN COIL UNITS District Cooling Chilled Water Application
STATIC FAN COIL UNITS District Cooling Chilled Water Application CLASSIFIED INSULATION & FILTER MEDIA GFC LD Series Cooling Capacity Range 9,690 yo 46,064 BTU/HR (4 ROWS ) GFC-LD-TC-10-13 3 General Specifications
More informationHTC. Air cooled Condensers. Capacities kw. Ripple Fin tubing Floating coil block suspension
Air cooled Condensers New condenser generation with better performance Capacities 9-1060 kw Ripple Fin tubing Floating coil block suspension Eurovent certified Capacities based on ENV 327 voor R404A *DX
More informationPHOS mini LT LED PROJECTOR
PHOS mini LT LED PROJECTOR SPECIFICATIONS Item:.. PHOS mini LT Body:.... Aluminium Available Colours:... White / Black / Silver Weight:.... 1.9 kg On / Off Switch:..... Not Available Environmental Conditions:.....
More informationUnused flameproof threads for cable glands have to be closed with certified plugs.
E X - P L U G A N D R E C E P T A C L E 1 A Metallic Design for Zone 1 The explosion-protected light metal plug and receptacle devices can be used in the areas of Zone 1 and Zone 2 at no risk of explosion.
More informationP-BarSeries BOL AOL. We COOL what you POWER. Plate & Bar Aluminum. Standard. Air-Oil Coolers. Standard. Models. Now featuring Brushless DC Fans
2014 Plate & Bar Aluminum Standard Air-Oil Coolers P-BarSeries We COOL what you POWER thermaltransfer.com Standard Models MA Now featuring Brushless DC Fans BOL Now featuring two relief bypass options
More informationDiaphragm pressure switches up to 42 V with brass housing. Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) 1) Male thread
0167 Diaphragm pressure switches with brass housing Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) Adjustment range tolerance at room temperature Male thread NO : NC : 36 Screw
More informationGMP-Type. Key Features: Integrated Motor-Pump Units
Integrated Motor-Pump Units GMP-Type Key Features: Direct coupling between motor and pump Rotation: Right (viewed from shaft end) Electric motor mounting type: special B3-B14 (IEC 34-7) Rated Voltage:
More informationMade of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) 1) Male thread
M.3 0166 Diaphragm pressure switches with M3 screw terminal Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) Adjustment range tolerance at room temperature
More informationPressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX up to 2000 l/min, up to 420 bar DF/DFF...1.X/2.X 30 60 110 140 160 240 280 330 500 660 990 1320 1500 2000 3000 4000 DF...3.X DFFX...1.X/2.X
More informationSERIES SF2-250 SUCTION FILTER. Flow rate to 45 gpm
SERIES SF2-250 SUCTION FILTER Flow rate to 45 gpm D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows
More informationCoolers. OK Series. Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF Cooling Systems Catalog. Applications
OK Series Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF 3-11 OKA 4-6 OKAF 4-6 OKA 8-11 OKAF 8-11 Description The OK Series cooler design uses a axial fan assembly which draws air through the cooler.
More informationCC3060 TYPE 12 COMPACT CABINET COOLER AIR-TO-WATER FLUSH-MOUNT MODEL
CC3060 TYPE 12 CC3060 13 lbs 9,300 0.3 1 x 6 30 x 8-3/4 x 4 Efficiency: 68.8 Watts / C T based on average internal cabinet temperature. 2. CC3060 Rated cooling: 2,725 Watts mounted to an uninsulated 72
More informationInline filter with filter element according to DIN 24550
Inline filter with filter element according to DIN 24550 RE 51421/07.11 Replaces: 12.10 1/16 Type 245LEN0040 to 400; 245LE0130, 0150 Size according to DIN 24550: 0040 to 0400 Additional sizes: 0130, 0150
More information3-Way Temperature Control Valve
12/06 3-Way Temperature Control Valve G Valve Typical applications Lubricating oil temperature control Jacket water cooling Charge air temperature control Central cooling Sea water cooling Key benefits
More information