Table of Contents. Haas Architectural Millwork Ph. (717) Fax (717)

Transcription

1 HAAS ARCHITECTURAL MILLWORK Your Complete Urethane Millwork Solution Provider Made in the USA You design it. We make it.

2 Table of Contents General Information Balusters Railings Newel Posts, Caps & Balls Dentil Blocks Brackets Mouldings Arches...39 Louvers Window Heads & Panels Gable Decorations...50 Shutters...51 Entrance Systems Miscellaneous, Keystones, Celing Medallions, Rosettes, Nips & Bips Installation Guide Index

3 From design to development - fabrication to facade. Haas Architectural Millwork can create any type or style millwork you need. Our patternmakers will work from drawings, existing moldings or your designs, to bring your ideas to life - no matter how large or small the project. Proudly Made in the USA HAAS Architectural Millwork is committed to manufacturing highest quality urethane millwork solutions for the building industry. If you can dream it and design it, HAAS can make it. HAAS Architectural Millwork far exceeds the performance of wood without any aesthetic compromise. Each pattern is made to exacting dimensions by our staff of Master patternmakers. The edges of Haas Architectural Millwork products are sharp, clean, and offer the true authentic look of wood. HAAS Architectural Millwork will not rot, will hold paint better than wood, and provides lower maintenance over the life of the product. HAAS Architectural Millwork comes factory primed with a high emulsion exterior latex paint and can be finish coated with any high quality exterior latex paint. HAAS Architectural Millwork products are made from water base products and are environmentally friendly. HAAS Architectural Millwork has over 50 years of experience in the urethane millwork industry. We have the knowledge, experience, and expertise to make the product you want at a fair price. Premium Urethane Millwork All HAAS ARCHITECTURAL MILLOWRK PRODUCTS ARE MADE AT OUR PLANT IN THE USA. 27 Grand Street, Red Lion, Pennsylvania ph: fax: haasmillwork@haasmillwork.com, Website: 3

4 MANUFACTURED IN AMERICA HAAS Architectural Millwork is committed to manufacturing highest quality urethane millwork products. Residential or Commercial, HAAS can replicate historic millwork made by the finest craftsmen to extacting detail. Architects, builders, and homeowners strive to make their project unique. HAAS can make your new millwork ideas come to life. CUSTOM DESIGNS, STYLES, & SIZES AT YOUR REQUEST 4 At Haas Architectural Millwork, Inc., our Master Patternmakers can work from drawings, pictures, prints, or original pieces to provide you with a long lasting quality product. We would love to quote your custom project. Whether you are in need of a historic reproduction or you have your own design, allow us to bring your ideas and designs to life. Made in the USA

5 Balustrade Systems 3-5/8 Railing/Balustrade System HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL S = 5 1/8 S = 5 5/8 S = 6 1/8 S = 6 7/8 Custom Lengths Available Custom Lengths Available Custom Lengths Available Custom Lengths Available HBAL S = 5-3/4 HBAL S = 5-1/8 HBAL S = 5-1/2 Balusters HBAL S = 5-1/2 NON SRUCTURAL HBAL HBAL HBAL HBAL HBAL HBAL HBAL S = 5-1/4 *S= Maximum Center-to-Center Distance To Meet 4 Code (see page 63). 5

6 Balustrade Systems 3 5/8 to 4 1/2 Railing System HBAL HBAL S = 5-1/4 HBAL S = 5-3/8 HBAL HBAL HBAL HBAL HBAL HBAL S = 5-1/2 Balusters 4 1/2 to 5 1/2 Railing System HBAL S = 5-3/4 HBAL HBAL S = 6 S = 5-5/8 HBAL S = 5-3/4 HBAL S = 6 HBAL HBAL HBAL HBAL HBAL Ext 30 S = 6 Pictured: HBAL *S= Maximum Center-to-Center Distance To Meet 4 Code (see page 63). Ext. = Extneded baluster blocks for stair applications.

7 Balustrade Systems 5 1/2 Railing/Balustrade System cont. HBAL HBAL HBAL S = 6 HBAL HBAL S = 5-1/2 HBAL HBAL HBAL S = 6 Pictured: HBAL HBAL S = 5-3/4 Pictured: HBAL HBAL S = 6 Pictured: HBAL HBAL S = 5-7/8 Balusters 7 1/4 Railing/Balustrade System HBAL HBAL EXT HBAL S = 6-3/8 HBAL HBAL EXT S = 6-3/4 HBAL HBAL HBAL S = 6-1/4 Pictured: HBAL *S= Maximum Center-to-Center Distance To Meet 4 Code (see page 63). 7

8 Balustrade Systems 7 1/4 Railing/Balustrade System cont. HBAL S = 6-1/2 HBAL S = 7-1/8 HBAL S = 6-1/4 Balusters HBAL HBAL S = 6 Pictured: HBAL HBAL HBAL HBAL S = 6-3/4 Pictured: HBAL HBAL HBAL S = 6-7/8 Pictured: HBAL HBAL HBAL HBAL HBAL HBAL Ext 35 S = 6-7/8 Pictured: HBAL *** Block dimensions vary per size. Call for details. HBAL S = 8-1/4 8 *S= Maximum Center-to-Center Distance To Meet 4 Code (see page 63). Ext. = Extneded baluster blocks for stair applications.

9 Balustrade Systems 7 1/4 Railing/Balustrade System cont. HBAL HBAL S = 8-1/4 S = 7 HBAL S = 8 12 Railing/Balustrade System HBAL HBAL HBAL EXT (EXTended blocks for stairs) S = 7-7/8 Balusters Pictured: HBAL HBAL S = 7-1/2 HBAL S = 7-3/8 HBAL S = Does not meet code. *S= Maximum Center-to-Center Distance To Meet 4 Code (see page 63). 9

10 Balustrade Systems 3-1/4 to 3-5/8 Railing/Balustrade System HTR 232 HTR HTR HTR HBR 233 HBR HBR HBR Railings HTR 210 HTR HTR HTR HBR 211 HBR HBR HBR HTR 200 HTR HTR HTR HBR 201 HBR HBR HBR *Radius Rails Available - Call for Quote* 10

11 Balustrade Systems 4-1/2 Railing/Balustrade System HTR 202 HTR HTR HTR HTR 204 HBR 203 HBR HBR HBR /2 Railing/Balustrade System HBR 205 Railings HTR HTR HTR HBR HBR HBR HTR 218 HTR HTR HTR *Radius Rails Available - Call for Quote* 11

12 Balustrade Systems 5-1/2 Railing/Balustrade System cont. HTR 212 HTR 212-8, 10, 12 HTR 213 HTR 212-8, 10, /4 Railing/Balustrade System Railings HTR 206 HTR 206-8, 10, 12 HTRG 206 HTR 206-8, 10, 12 GOOSE-NECK RAIL NON-STRUCTURAL HBR 207 HBR , 12 Note: Gooseneck rails available. Call us for Quote. 12 HTR 214 HTR HBR 215 HBR 215-8, 10, 12 *Radius Rails Available - Call for Quote*

13 Balustrade Systems 12 Railing/Balustrade System cont. HTR 208 HBR 209 HTR HTR HTR HTR 216 HTR HTR HTR HBR HBR HBR & 12 Railing OVER NEWEL Balustrade System RAIL CAP APPLIQUE Railings Fits HTR 206 AVAILABLE FOR HTR 207 HTR 208 HTR 214 HTR 216 Call us to Quote HFNCH HFNCH HFNCH Fits HTR 214 Fits HTR 216 CUSTOM SIZES AVAILIBLE. CALL US FOR A QUOTE

14 Balustrade Systems Newel Posts Pictured: HNP Plain Newel Posts HNP HNP HNP HNP HNP HNP Plain Newel Posts HAPNP HAPNP Measurements 4 sq. 5-1/2 sq. 8 sq. 9 sq. 10 sq. 12-3/4 sq. Measurements 8-5 sided 45 degree angle 10-5 sided 45 degree angle Pictured: HAPNP Plain Newel Posts HNP Width 10 sq. RADIUS RAILS DOWN STEPS ARE AVAILIBLE. CALL US FOR A QUOTE Pictured: HTR HBAL All Newel Posts are made 48 high.

15 Balustrade Systems CornerPanel Newel Posts HCNP HCNP HCNP HCNP Measurements 8 sq. 9 sq. 10 sq. 12-3/4 sq. Pictured: HCNP In-Line Panel Newel Posts HPNP HPNP HPNP HPNP Paneled Newel Posts HSNP HSNP HSNP HSNP Measurements 8 sq. 9 sq. 10 sq. 12-3/4 sq. Measurements 8 sq. 9 sq. 10 sq. 12-3/4 sq. Newel Posts * Newel posts can be cut in half. Specify by adding -H. (Ex. HSNP H) All Newel Posts are made 48 high. RAIL SUPPORT BLOCK Pictured: HSB 900 HSB 900 Fits all Rail Sizes 15

16 Balustrade Systems Flat Panel Newel Measurements Posts Width Height Fits HCFPNP sq. 31 HTR 206 HCFPNP sq. 31 HTR 208 Newel Caps Pictured: HCFPNP CUSTOM SIZES AVAILIBLE CALL US FOR A QUOTE Pictured: HANC Pictured: HFPNC Pictured: HFPNC Flat Panel Measurements Newel Caps Bottom Width Top Width Height HFPNC /8 5 HFPNC /4 16-1/2 5 ***Flat Panel Newel Caps only fit Flat Panel Newels*** Peaked Newel Caps Width Height to Peak HPNC /2 sq. 2 HPNC sq. 1 1/2 HPNC /4 sq. 2 1/4 HPNC /2 sq. 3 HPNC /8 sq. 2 1/2 HPNC /4 sq. 3 5 Side Newel Caps Size 45 Degree HANC 310-PLAIN PEAK NEWEL CAP AVAILABLE IN ALL SIZES HFNC FANCY PEAK NEWEL CAP AVAILABLE IN ALL SIZES 16 Flat Newel Caps Width HNC /2 sq.

17 Balustrade Systems Flat Newel Caps HNC HNC HNC HNC HNC HNC Width 4-1/4 sq. 6-1/4 sq. 8-1/2 sq. 9-3/4 sq. 11 sq. 13-3/4 sq. Peaked Newel Caps Width Height to Peak HPNC /2 sq. 1-1/2 HPNC sq. 1-3/4 HPNC /4 sq. 1-1/2 HPNC /2 sq. 1-1/2 HPNC sq. 1-5/8 HPNC /2 sq. 1-7/8 Pictured: HBALL Pictured: HBALL Balls Base Dia Height HBALL /2 HBALL HBALL /4 HBALL /2 HBALL /4 HBALL /4 HBALL HBALL /8 4-1/2 HBALL /2 5-1/4 Fancy Newel Caps Width HFNC /4 sq. HFNC /8 sq. HFNC /4 HFNC /4 sq. HFNC /8 sq. HFNC /4 sq. HFNC /8 sq. * Caps are recessed to fit over post. Pictured: HTC-6 SEE PAGE 59 FOR ACORNS, URNS, & PINEAPPLES Add 2 1/2 for Outside Dimensions Trim Collars Inside Width HTC 6 5-1/2 HTC 8 8 HTC 9 9 HTC HTC /4 Newel Caps & Balls 17

18 Dentil Blocks *Dentil blocks can be coped.* Dentil Blocks HDB 114 Height: 6 Width: 6 Proj: 13-1/2 HDB 471 Height: 3-1/2 Width: 3-1/2 Projection: 3-1/2 HDB 122 Height: 4-1/2 Width: 4-1/2 Projection: 36 HDB Height: 3-1/2 Width: 5-1/8 Projection: 7-3/4 HDB Height: 6 Width: 7-1/2 Proj: 13-1/2 Pictured HDB 472 HDB 462 Height: 3-1/4 Width: 2-1/2 Projection: 6 HDB Height: 4-1/4 Width: 5 Projection: 7-3/4 HDB Height: 4 Width: 4 Projection: 8 Pictured: HDB 472 HDB 472 HDB Height: 4 Width: 4 Projection: 6 Height: 4 Width: 4 Projection: 11 3/8 CUSTOM DENTIL BLOCKS AVAILABLE. CALL OR FAX US. 18 Pitched Dentil Blocks All Dentil Blocks are Avaialble on Pitch. Specify (L) or (R ) and the desired Pitch. Ex. HDB 472L-7/12 / HDB 472R-7/12

19 Dentil Blocks HDB 473 Height: 3 Width: 4-7/8 Projection: 5-5/8 HDB 474 Height: 5-15/16 Width: 7-1/8 Projection: 9-1/2 Pictured: HDB 475 Pictured: HDB 476 HDB 475 Height: 4 Width: 4-7/16 Projection: 9 HDB 476 Height: 2-7/8 Width: 4-5/8 Projection: 4-1/8 HDB Height: 5-3/4 Width: 5-7/8 Projection: 9-3/4 HDB Height: 4 Width: 4-7/16 Projection: 16 HDB Height: 2-7/8 Width: 4-5/8 Projection: 7-5/16 HDB 510 Height: 6 Width: 4-3/4 Projection: 5 HROS 5 Height: 2-1/8 Width: 5-1/2 Projection: 5-1/2 Dentil Blocks Pictured: HDB HDB 505 Height: 3-3/8 Width: 5 Projection: 7-3/4 HDB 560 Height: 6 Width: 5-1/2 Projection: 12 HDB 521 Height: 10 Width: 6 Projection: 9-3/8 HDB 513 Height: 6-7/8 Width: 4-3/8 Projection: 5-3/8 HDB 820 Height: 6-3/8 Width: 5 Projection: 7 HDB 668 Height: 5-3/8 Width: 5-1/2 Projection: 8 HDB 700 Height: 4-5/8 Width: 3-1/2 Projection: 14-5/8 19

20 Dentil Blocks Brackets/Dentil Blocks Pictured: HDB HDB 800 Height: 4-1/2 Width: 3-3/4 Projection: 8-5/8 HDB 900 HDB HDB Height: 4 Width: 5 Projection: 3-1/2 HBKT 100 Height: 8 Width: 4-7/8 Projection: 8 HBKT Height: 30-1/4 Width: 3-1/2 Projection: 28 Height: 4 Width: 5 Projection: -1/4 6 BRACKETS HBKT Height: 4 Width: 1-1/2 Projection: 4-1/8 HBKT Height: 6 Width: 1-1/2 Projection: 5-7/8 HBKT BIP Height: 30-1/4 Width: 3-1/2 Projection: 28 HBKT Height: 12 Width: 1-1/4 Projection: 12 HBKT 101 Height: 20 Width: 5-3/8 Projection: 4-7/8 HDB 800LP/RP Height: Varies Width: 3-1/2 Projection: 8-5/8 **Specify Pitch ** Height: 5-1/2 Width: 5 Projection: -1/4 7 HBKT 118 Height: 7-5/8 Width: 8-1/8 Proj: 18-3/4 HBKT 108 Height: 20 Width: 7-3/4 Projection: 11 HBKT Height: 18-1/4 Width: 7-5/8 Projection: 6-5/8 HBKT Height: 10-5/8 Width: 3 Projection: 7-1/2 20

21 Brackets HBKT HBKT Height: 8 Width: 3-1/2 Projection: 6-1/2 HBKT Height: 10 Width: 3-1/2 Projection: 5-1/4 HBKT Height: 10 Width: 3-1/2 Projection: 4 HBKT Height: 10 Width: 4 Projection: 4 HBKT Height: 16 Width: 4-1/2 Projection: 10-1/2 HBKT Height: 5-1/4 Width: 3-5/8 Projection: 13 HBKT CUSTOM BRACKETS AVAILABLE. CALL OR FAX US YOUR DRAWING. HBKT Height: 15-3/8 Width: 3-1/2 Projection: 11 HBKT Height: 19 Width: 3-1/2 Projection: 15-1/2 Brackets HBKT-R Height: 10 Width: 3-1/2 Projection: 5-1/4 HBKT Height: 14 Width: 6 Projection: 8 HBKT Height: 11-7/8 Width: 1 Projection: 11-7/8 HBKT Height: 9-3/4 Width: 4 Projection: 7 HBKT Height: 11 Width: 6 Projection: 7 HBKT Height: 15-3/4 Width: 14 Projection: 15 21

22 Brackets Brackets HBKT Height: 36 Width: 6 Projection: 36 HBKT Height: 18 Width: 3-3/8 Projection: 18 HBKT Height: 16 Width: 6 Projection: 11 HBKT Height: 17-1/4 Width: 2 Projection: 9-5/8 HBKT Height: 6-5/8 Width: 6 Projection: 10-7/8 HBKT Height: 36 Width: 6 Projection: 36 HBKT Height: 11-1/2 Width: 7/8 Projection: 7-3/4 HBKT 430 Height: 26-1/2 Width: 3-1/2 Projection: 18-1/2 HBKT Height: 23-7/8 Width: 4 Projection: 18-5/8 HBKT HBKT 432 Height: 15-1/2 Width: 4-1/2 Projection: 20 HBKT Height: 32 Width: 3 Projection: 20 HBKT 434 Height: 14 Width: 4 Projection: CALL US FOR CUSTOM QUOTES Ph. (717) Fax (717)

23 HBKT Brackets HBKT 488 HBKT 521 HBKT 616 HBKT 617 HBKT 628 Height: 10-9/16 Width: 7 Projection: 10-9/16 HBKT 711 Height: 10 Width: 3-1/2 Projection: 7 HBKT 619 Height: 11-1/2 Width: 9-1/4 Proj: 23-1/2 HBKT 730 Height: 30 Width: 7 Projection: 10 Brackets HBKT 725 Height: 36 Width: 3-1/2 Projection: 42 HBKT 1410 Height: 10 Width: 4 Projection: 14 HBKT 1710 HBKT 1426 Height: 25-1/2 Width: 6-1/2 Projection: 14-1/2 HBKT 1810 Height: 10 Width: 7-1/4 Projection: 18 23

24 Mouldings HMLD Hght: 18-3/4 Proj: 1-7/8 Mouldings Pictured: HMLD 1009-VENTED SOFFIT, HMLD HDB 800-1, HMLD 377 HMLD BAMBOO HMLD Hght: 6-3/8 Proj:1-7/8 Hght: 1-7/8 Lgth: 14 Proj: 1 HMLD HMLD Hght: 12-3/8 Proj: 1-1/2 Hght: 3 Proj: 2-1/4 HMLD HMLD Hght: 1-7/8 Proj: 1-3/8 Hght: 3-7/8 Proj: 3-7/8 HMLD HMLD Hght: 2-1/8 Proj: 1-3/4 Hght: 4-1/4 Proj: 4-1/2 24

25 Mouldings CUSTOM MOULDINGS AVAILABLE. CALL OR FAX US YOUR DRAWING. HMLD HMLD Hght: 3/4 Lgth: 8 Proj: 3/4 Hght: 2-5/8 Lgth: 12 Proj: 7/8 HMLD HMLD Hght: 2-3/4 Proj: 2-3/4 Hght: 7-3/4 Proj: 5-3/4 Mouldings HMLD Hght: 3 Lgth: 12 Proj: 2 HMLD Hght: 16 Proj: 3-3/4 HALF ROUND, ELLIPTICAL & SEGMENT ARCHES AVAILABLE. CALL OR FAX US. 25

26 Mouldings Mouldings BRICK MOULDING HMLD HMLD HMLD Hght: 2 Lgth: 8 & 16 Proj: 1-1/4 BRICK MOULDING AVAILABLE IN WIDER DIMENSIONS. CALL OR FAX US. HMLD Hght: 4-1/2 Proj: 3-5/8 HMLD HMLD HMLD HMLD HMLD MADE IN THE USA HMLD HMLD Hght: 2 Lgth: 8 & 16 Proj: 3/4 Hght: 2 Lgth: 8 & 16 Proj: 1-1/2 Hght: 2 Lgth: 8 & 16 Proj: 2 Hght: 2-1/4 Proj: 1-1/8 HMLD Hght: 10-3/4 Lgth: 8 Proj: 2 HMLD Hght: 7-3/4 Proj: 3-1/2 HMLD 1020 matches 1021 & 1027 HMLD Ht: 4 Proj: 3-1/2 HMLD Hght: 1-3/4 Proj: 1 26

27 HALF ROUND, ELLIPTICAL & SEGMENT ARCHES AVAILABLE. CALL OR FAX US HMLD Hght: 3-1/4 Proj: 3/4 Mouldings HMLD HMLD HMLD Hght: 4-1/4 Proj: 4 Hght: 5 3/4 Proj: 1-1/8 HMLD HMLD HMLD Hght: 1-3/8 Proj: 13/16 Hght: 5 3/8 Proj: 3-1/2 Mouldings Hght: 7-1/2 Proj: 1 Hght: 5-1/4 Proj: 5/8 HMLD HMLD Hght: 5 Proj: 7/8 Hght: 5 Proj: 1-1/8 27

28 Mouldings HALF ROUND, ELLIPTICAL & SEGMENT ARCHES AVAILABLE. HMLD Hght: 5-1/2 Proj: 1-5/8 Mouldings 28 HMLD HMLD HMLD HMLD Hght: Lgth: 10 Proj: 1/2 Hght: 4-1/4 Proj: 1-1/2 Hght: 5-1/2 Proj: 1-3/4 Hght: 3-1/2 Proj: 1 HMLD Hght: 2-1/8 Proj: 1-5/8 HMLD HMLD HMLD HMLD Hght: 5-1/2 Proj: 2 Hght: 7 Proj: 1-3/4 Hght: 3-1/2 Proj: 1-3/4 Hght: 6-1/4 Proj: 4-3/8

29 Mouldings HMLD Hght: 3-3/8 Proj: 2-1/8 HMLD MADE IN THE USA HMLD HMLD HMLD Hght: 6-1/2 Proj: 4-1/2 Hght: 3-3/4 Proj: 3-3/4 Hght: 4 Proj: 3/4 HMLD HMLD Hght: 12-3/4 Proj: 3-1/2 Hght: 4-1/4 Proj: 3-3/8 Hght: 4 Proj: 1-1/8 Mouldings HMLD HMLD Hght: 3-1/2 Proj: 1 Hght: 3-1/2 Proj: 1-1/8 HMLD HMLD Hght: 5-1/4 Proj: 1 Hght: 7-1/4 Proj: 1 29

30 Mouldings CONCAVE & CONVEX RADIUS MOULDINGS AVAILABLE. CALL OR FAX US. HMLD Mouldings Products in this picture are not Haas Architectural Millwork products. HMLD HMLD See Page 38 for Pitched Dentil Hght: 4-1/2 Proj: 1-1/8 Hght: 5-1/2 Proj: 4-5/8 HMLD HMLD HMLD Hght: 10 Proj: 2-3/4 Hght: 9-1/2 Proj: 10-1/8 Hght: 3-1/2 Proj: 2-1/4 30 HMLD Hght: 6-1/2 Proj: 3-3/8 HMLD Hght: 3-3/4 Lgth: 8 Proj: 3-3/4 Hght: 3/4 Lgth: 8 Proj: 3/4

31 Mouldings HMLD HMLD Hght: 5-1/4 Proj: 4 Hght: 1-3/4 Lgth: 8 Proj: 1 1/8 HMLD HMLD Hght: 8-3/4 Proj: 5-3/8 HMLD HMLD Hght: 7-3/4 Proj: 2-3/8 Hght: 11 Proj: 6-1/2 HMLD HMLD Hght: 10-1/8 Proj: 9-1/2 Hght: 15-1/2 Proj: 9-1/2 Mouldings HMLD Hght: 4 Proj: 3-1/8 Hght: 3-3/8 Proj: 2-5/8 HMLD HMLD Hght: 10-1/4 Proj: 5-3/8 Hght: 14-3/8 Proj: 7 31

32 Mouldings HMLD HMLD Hght: 12-1/2 Proj: 7-1/4 Hght: 9-1/8 Proj: 3-3/8 Mouldings HMLD HMLD Hght: 1-3/8 Lgth: 8 Proj: 11/16 Hght: 6-1/4 Proj: 3-3/4 HMLD HMLD Hght: 5-1/4 Proj: 2-1/2 Hght: 6 Proj: 1-1/2 HMLD Hght: 7 Proj: 1-1/2 HMLD Hght: 9-1/2 Proj: 1-1/2 HMLD Hght: 11-1/2 Proj: 1-1/2 32

33 Mouldings HMLD Hght: 9 Proj: 1-3/8 HMLD Hght: 9 Proj: 1-3/4 HMLD HMLD HMLD HMLD HMLD Hght: 2-3/8 Proj: 1-1/2 Hght: 5-1/2 Proj: 1-1/2 Hght: 2-3/8 Lgth: 8 Proj: 2-1/4 Hght: 4-1/2 Lgth: 8 Proj: 1-1/2 Hght: 3-3/8 Lgth: 8 Proj: 1-3/8 HMLD HMLD HMLD HMLD Hght: 9-1/2 Proj: 8-3/4 Hght: 8-1/2 Proj: 1-1/2 Hght: 3 Lgth: 8 Proj: 1-1/2 Hght: 14-1/2 Proj: 2-1/16 Mouldings MADE IN THE USA 33

34 Mouldings HALF ROUND, ELLIPTICAL & SEGMENT ARCHES AVAILABLE. CALL OR FAX US Mouldings HMLD Specify Dentil Spacing. HMLD Hght: 12 Proj: 4-1/2 Ht: 7-1/2 Lgth: 8 Proj: 6 HMLD Hght: 9/16 Lgth: 8 Proj: 9/16 HMLD Hght: 1-3/8 Lgth: 8 Proj: 9/16 HMLD HMLD HMLD Hght: 2-1/2 Lgth: 8 Proj: 5/8 HMLD Hght: 7-1/2 Lgth: 12 Proj: 6-1/2 Hght: 5-1/2 Proj: 5 Hght: 10-1/4 Lgth: 12 Proj: 13-1/2 34

35 Mouldings Flat Boards HFB 1100 Part Number Projection Height Length HFB /4-3 1/2-16 3/4 3 1/2 16 HALF ROUND, ELLIPTICAL & SEGMENT ARCHES AVAILABLE. CALL OR FAX US BEADED CEILING PANEL HMLD HFB /4-5 1/2-16 3/4 5 1/2 16 HFB /4-7 1/2-16 3/4 7 1/2 16 HFB /4-9 1/2-16 3/4 9 1/2 16 HFB /4-11 1/2-16 3/4 11 1/2 16 HFB / / HFB / /2 16 HFB / /2 16 HFB / /2 16 HFB / /2 16 HFB / /2 16 HFB HFB HFB /2-3 1/ /2 3 1/2 16 HFB /2-5 1/ /2 5 1/2 16 HFB /2-7 1/ /2 7 1/2 16 HFB /2-9 1/ /2 9 1/2 16 HFB /2-11 1/ /2 11 1/2 16 HFB / / HMLD Mouldings Height: 7-1/4 Length: 16 Projection: 1 HMLD Hght: 5-1/4 Proj: 4-1/4 Height: 11-1/2 Length: 16 Projection: 1 HMLD Hght: 14 1/2 Lgth: 12 Proj: 10 35

36 Mouldings 36 Mouldings HMLD HMLD HMLD HMLD HMLD Hght: 17 Proj: 5-1/2 Hght: 1-3/4 to 1 Proj: 2-1/2 Hght: 1-1/2 Lgth: 8 Proj: 3/4 HMLD Hght: Lgth: 8 Proj: Hght: 17-3/4 Lgth: 12 Proj:13-5/8 Hght: 5-7/8 Lgth: 10 Proj: 4-3/4 SILL MOULDING HMLD HMLD HMLD HMLD HMLD Hght: 1-1/2 to 1 Proj: 4 Hght: 15-1/2 Lgth: 12 Proj: 8-1/4 Available with Return HMLD Hght: 8-3/4 Proj: 1 Hght: 2-15 /16 Lgth: 8 Proj: 1-1/16 Hght: Proj: CONCAVE & CONVEX RADIUS MOULDINGS AVAILABLE. CALL OR FAX US.

37 Mouldings HMLD HMLD HMLD HMLD Hght: 8-1/4 Lgth: 12 Proj: 10-1/4 Hght: 7 Proj: 7 HMLD HMLD Hght: 7-1/4 Proj: 12 HMLD 2500-?? Hght: Lgth: Proj: Hght: 4-3/4 Proj: 4-3/4 Hght: 1-3/4 Lgth: 8 Proj: 7/8 HMLD HMLD HMLD Hght:17 Proj: 1-3/4 Hight: 6-1/2 Proj: 6 Hght: 7-1/8 Proj: 5-5/8 Mouldings Hght: Lgth: 8 Proj: HMLD HMLD Hght: 11 Proj: 6-1/4 MADE IN THE USA Hght: 9-1/2 Lgth: 11-5 Proj: 4-1/2 37

38 Pitched Dentil Mouldings Mouldings 38 Part Number Part Number Pitch HMLD L* 5/12 HMLD R** 5/12 HMLD L 6/12 HMLD R 6/12 HMLD L 7/12 HMLD R 7/12 HMLD L 8/12 HMLD R 8/12 HMLD L 9/12 HMLD R 9/12 HMLD L 10/12 HMLD R 10/12 HMLD L 12/12 HMLD R 12/12 *-L indicates left pitch **-R indicates right pitch Pitch HMLD L* 5/12 HMLD R** 5/12 HMLD L 6/12 HMLD R 6/12 HMLD L 7/12 HMLD R 7/12 HMLD L 8/12 HMLD R 8/12 HMLD L 9/12 HMLD R 9/12 HMLD L 10/12 HMLD R 10/12 HMLD L 12/12 HMLD R 12/12 *-L indicates left pitch **-R indicates right pitch HMLD HMLD HMLD HMLD Hght: 4-1/2 Proj: 1-1/8 Hght: 6 Proj: 1-1/2 Hght: 3-3/8 Lgth: 8 Proj: 1-3/8 Hght: 7 Proj: 1-1/2 PITCHED DENTIL MOULDINGS AVAILABLE. CALL OR FAX US Part Number Pitched Mouldings 8 length Pitch HMLD L* 5/12 HMLD R** 5/12 HMLD L 6/12 HMLD R 6/12 HMLD L 7/12 HMLD R 7/12 HMLD L 8/12 HMLD R 8/12 HMLD L 9/12 HMLD R 9/12 HMLD L 10/12 HMLD R 10/12 HMLD L 12/12 HMLD R 12/12 *-L indicates left pitch **-R indicates right pitch Part Number Pitch HMLD L* 5/12 HMLD R** 5/12 HMLD L 6/12 HMLD R 6/12 HMLD L 7/12 HMLD R 7/12 HMLD L 8/12 HMLD R 8/12 HMLD L 9/12 HMLD R 9/12 HMLD L 10/12 HMLD R 10/12 HMLD L 12/12 HMLD R 12/12 *-L indicates left pitch **-R indicates right pitch

39 Arch Mouldings Half Round, Segment, & Eliptical Arches HALF ROUND ARCHES IN MOST CASING PROFILES AVAILABLE. CALL OR FAX US HARC Height: 4-1/4 Inside Diameter: 36 Projection: 1-1/2 (Custom sizes available) Pictured: HARC HARC 900 HARC Height: 5-1/2 Inside Diameter: 36 Projection: 1-3/4 (Custom sizes available) Pictured: HARC *Available with keystone: HARCK TO ADD A KEYSTONE JUST ADD A (K) AFTER THE ITEM Ex. HARC(K)- SIZE HARCK 901 Mouldings SEGMENT ARCHES AVAILABLE. CALL OR FAX US HEARC HWH 901 Profile Also available usiing other Window Head profiles and Mouldings. Add Flankers ELLIPTICAL ARCHES AVAILABLE. CALL OR FAX US MADE IN THE USA 39

40 Louvers HRL Pictured: HRL 30-C Part No. Diameter Projection HRL HRL HRL HRL HRL LOUVERS WITH 3 1/2 OR 5 1/2 FLAT TRIM OR CASING AVAILABLE. CALL OR FAX US Louvers 40 HRKL Pictured: HRKL 30-C HRECTL No Sill SPECIFY OPEN OR CLOSED O=Open / C= Closed Part No. Diameter Projection HRKL HRKL HRKL HRKL HRKL HRECTLS With Sill Add (S) Part No. Width Height Proj HRECTL 12x HRECTL 12x HRECTL 12x HRECTL 16x HRECTL 16x HRECTL 18x HRECTL 18x HRECTL 18x HRECTL 21-1/2x27-1/2 21-1/2 27-1/2 2 HRECTL 24x HRECTL 24x HRECTL 24x *All louvers come either open or closed. Open louvers come with a screen installed.. Specify this by adding an O or C to the end of the part number. (Ex. HRL 22-O or HRL 22-C)

41 Louvers HHRL Pictured: HHRL 32-C CUSTOM LOUVERS SIZES & STYLE AVAILABLE. CALL OR FAX US HHRKL Part No. Part No. Diameter Projection HHRL 22 HHRKL HHRL 24 HHRKL HHRL 32 HHRKL HHRL 36 HHRKL HHRL 40 HHRKL HHRL 42 HHRKL HHRL 48 HHRKL HCTL Part No. Width Height Proj HCTL 12x HCTL 12x HCTL 18x HCTL 22x HGL Pictured: HCTL 22x32-C WANT TO ADD A KEYSTONE? CALL OR FAX US HDL Louvers Part No. Width Projection HDL HDL Part No. Width Height Projection HGL 18x HGL 18x HGL 18x HGL 18x HGL 18X HGL 18x Pictured: HDL 14 MADE IN THE USA *All louvers come either open or closed. Open louvers come with a screen installed on the back. Specify this by adding an O or C to the end of the part number. (Ex. HRL 22-O or HRL 22-C) 41

42 Louvers HOCL HOVL Louvers Part No. Width Projection HOCL HOCL HOCL 27-1/2 27-1/2 2 Pictured: HTL 12x36-C HTL HETL Part No. Width Height Projection HOVL 28x CUSTOM LOUVERS SIZES & STYLE AVAILABLE. CALL OR FAX US. Part No. Pitch Width Height Proj HTL 6x48 6/ HTL 6x76 6/ HTL 6x88 6/ HTL 6x120 6/ HTL 8x64 8/ /16 2 HTL 10x64 10/ /16 2 HTL 12x36 12/ HTL 12x64 12/ SPECIFY OPEN OR CLOSED O=Open / C= Closed 42 MADE IN THE USA Pictured: HETL 12x24-C Part No. Width Height Projection HETL 12x HETL 18x HETL 22x *All louvers come either open or closed. Open louvers come with a screen installed on the back. Please specify this by adding an O or C to the end of the part number. (Ex. HRL 22-O or HRL 22-C)

43 Window Heads HWH 900 Height: 6 Projection: 3 HWHK 900 Height: 6 Keystone Height: 7-3/4 Projection: 4 HWH 901 Height: 9 Projection: 3 Pictured: HWH /8 Pictured: HWHK /8 HWHK 901 Height: 9 Keystone Height: 10-3/4 Projection: 4 Pictured: HWH Pictured: HWHK Window Heads HWH 902 Height: 9 Projection: 4 Pictured: HWH HWHK 902 Height: 9 Keystone Height: 10-3/4 Projection: 5 1/2 Pictured: HWHK *Window Heads Available up to

44 Window Heads HWH 903 Height: 10 Projection: 4 Pictured: HWH MADE IN THE USA Window Heads HWHK 903 Height: 10 Keystone Height: 10-3/4 Projection: 5-1/2 HWH 905 & 906 AVAILABLE WITH KEYSTONES HWH 904 Height: 11 Projection: 4-3/4 Pictured: HWHK HWHK 904 Height: 11 Keystone Height: 12-7/8 Projection: 7 HWH 905 Height: 13-3/4 Projection: 4 Standard Sizes : 36, 41-5/8, 48, 68, Custom Sizes Available HWH 906 Height: varies Projection: 4 Standard Sizes : 36, 41 5/8, 48, 68, Custom Sizes Available Pictured: HWH Pictured: HWHK **905 & 906 Profiles match HWH 902 ** 44 *Window Heads Available up to 204

45 Window Heads HWH(K) 907 Height: 9 Projection:1-5/8 HWH 908** Height: 5-1/2 Projection: 1-5/8 HWH 909 Height: varies Projection: 2 Widths: Up to 144 HWH 910 Height: varies Projection: 2 Widths: 24 through 144 HWH 911 Height: varies Projection: 2 Widths: 24 through 108 HWH 911-O PLAIN HALF ROUND Pictured: HWH HWH 907 & 908 Availble with or without Keystone Ex. HWH(K) Window Heads HWH 937 Height: varies Projection: 2 Widths: 24 through 108 *Sunburst Window Heads Available up to 108 HWH 942 Height: varies Projection: 2-7/8 Widths: 24 through 108 Available Without Keystone 45

46 Window Heads HWHK 912 Height: varies Projection: 5 Arch Available up to 96. **Wing Length up to 42 is Standard. Window Heads HWHK 913 Height: varies Projection: 5 Arch Available up to 96. **Wing Length up to 42 is Standard. TO ORDER: Arch Each Wing Width Total Width Example: HWH (HWH ) MADE IN THE USA CUSTOM ARCH WITH WINGS HARC To Order Specify: Arch Moulding - (HMLD 1046, HMLD 1033, HMLD ) Arch Size - (24 up to 72 Available) Keystone (K) No Keystone Wing Style - HWH 900, HWH 901, or HWH 902 Wing Length - Size (Standard Size up to 42, 43 Up Custom)) Arch Closed or Open - (HWH 911 OR HWH911-O, HWH 937) EXAMPLES: With Keystone and Sunburst Without Keystone and Sunburst HARCK HARC (****USE ORDER SHEET ON PAGE 74****)

47 Window Heads HWH 915 Height: 21-3/8 Projection 3 Custom Sizes Available HEWH 917 HWH 918 Height: varies Projection: 4 Custom Sizes Available HDP 44 Height: 33-1/4 Width 43-3/4 Projection: 5 Pitch 14/12 HDP 49 Height: 38-1/2 Width: 49 Projection: 5 Pitch 14/12 Pictured: HWH Height- 32 1/2 DORMER PEDIMENT **CUSTOM SIZES AVAILABLE CALL OR FAX US.** Height: 26 Projection: 2 Custom Sizes Available Pictured: HEWH HWH 920 Height: 10-1/4 Projection: 3-1/4 Custom Sizes Available Pictured: HEWH Custom Sizes & Styles Available HWH 926 Height: 15 Projection: 7-1/4 Custom Sizes Available ***Standard Widths Available 915, 918, 917, 920, /2, 51 3/4, 55, 66 1/2, 75 1/2, 79 1/4, 83 1/4 Window Heads 47

48 Keystones Keystones 48 HKST 900 Height: 7-3/4 Top Width: 8-1/8 Bottom Width: 4-5/16 Projection: 4 HKST 901 Height: 10-3/4 Top Width: 10 Bottom Width: 4 9/16 Projection: 4 HKST 902 Height: 10-3/4 Top Width: 10 Bottom Width: 5-1/8 Projection: 5-1/2 HKST 904 Height: 12-7/8 Top Width: 11-7/8 Bottom Width: 6 Projection: 7 HKST 910 Height: 19-3/4 Top Width: 15-7/8 Bottom Width: 10 Projection: 8-1/8 HKST 912 Height: 3-5/8 Top Width: 3-1/8 Bottom Width: 2-1/8 Projection: 2-1/4 HKST 900-1* Height: 7-3/4 Top Width: 8-1/8 Bottom Width: 4-5/16 Projection: 4 *Coped to fit 900 Series Window Head HKST 901-1* Height: 10-3/4 Top Width: 10 Bottom Width: 4-9/16 Projection: 4 *Coped to fit 901 Series Window Head Pictured: HKST HKST 902-1* Height: 10-3/4 Top Width: 10 Bottom Width: 5-1/8 Projection: 5-1/2 *Coped to fit 902 Series Window Head Pictured: HKST HKST 904-1* Height: 12-7/8 Top Width: 11-7/8 Bottom Width: 6 Projection: 7 *Coped to fit 904 Series Window Head HKST 911 Height: 4-5/16 Top Width: 4-5/8 Bottom Width: 3-1/8 Projection: 3-7/8 KEYSTONES are available Solid and can be coped to Flat Board, and many Moulding Profiles Just Ask us.

49 Window Panels HWP 100 Projection: 1-1/4 Old Item No. HWP BS-P CUSTOM PANEL SIZES & STYLE AVAILABLE. CALL OR FAX US Pictured: HWP BS-P Width Part Number HWP HWP HWP Height 18 Height 26 Height 29 5/8 HWP /8 HWP /8 HWP /8 33 5/8 HWP /8 HWP /8 HWP /8 36 HWP HWP HWP /8 HWP /8 HWP /8 HWP /8 41 5/8 HWP /8 HWP /8 HWP /8 42 HWP HWP HWP HWP HWP HWP HWP HWP HWP HWP HWP HWP HWP 200 Projection: 1-7/8 Old Item No. HWP BS-RP Window Panels Pictured: HWP BS-RP MADE IN THE USA Width Part Number HWP HWP HWP Height 18 Height 26 Height 29 5/8 HWP /8 HWP /8 HWP /8 33 5/8 HWP /8 HWP /8 HWP /8 36 HWP HWP HWP /8 HWP /8 HWP /8 HWP /8 41 5/8 HWP /8 HWP /8 HWP /8 42 HWP HWP HWP HWP HWP HWP HWP HWP HWP HWP HWP HWP

50 Panels & Shutters HWP 300 Projection: 1-1/4 Panels & Shutters Raised Window Panel w/ 4 Trim Part No. Width Height Proj HWP X /2 HWP x /2 HBBS Other Sizes Available Call or Fax Us QUARTER ROUND SHUTTER TOPS TRIPLE PANEL SHUTTERS CUSTOM SIZES & STYLES CALL OR FAX US HLS HPS Part No. Part No. Width Height Proj HLS 18x24 HPS 18x /8 HLS 18x30 HPS 18x /8 HLS 18x36 HPS 18x /8 HLS 18x42 HPS 18x /8 HLS 18X48 HPS 18X /8 HLS 18x 54 HPS 18x /8 Part No. Width Height Proj HBBS 22x /2 MADE IN THE USA 50

51 Door Panels *Can be used in steel doors as inserts.* Pictured: HWP RP-14x24 HWP RP-10x14 Height: 10 Width: 14 Projection: 1-3/8 HWP RP-14x24 Height: 14 Width: 24 Projection: 1-3/8 HWP RP-14x22 Height: 14 Width: 22 Projection: 1-3/8 Door Panels Pictured: HWP WG-RP-14x24 HWP WG-RP-10x14 Height: 10 Width: 14 Projection: 1-3/8 HWP WG-RP-14x22 Height: 14 Width: 22 Projection: 1-3/8 HWP WG-RP-14x24 Height: 14 Width: 24 Projection: 1-3/8 51

52 Entrance Systems HCP HACP HSCP Entrance Systems Pictured: HPCP 55 HCKP HPCP Pictured: HACP 55 HRHCP Pictured: HRHCP 55 SINGLE DOOR OPENINGS Chart for Crossheads & Combination Crossheads/Pediments Pilaster Widths Description Part No. Bottom Width Top Width Height Projection 3 3/4 4 1/2 5 1/4 6 3/4 7 1/2 Acorn Combo HACP 47-1/2 Distance between pilasters Crosshead HCP 47-1/2 Crosshead w/keystone HCKP 47-1/ / /2 Peak Combo HPCP 47-1/2 Rams Head Combo HRHCP 47-1/2 Sunburst Combo HSCP 47-1/2 Acorn Combo HACP 51-3/4 Distance between pilasters Crosshead HCP 51-3/4 Crosshead w/keystone HCKP 51-3/4 44 1/4 42 3/4 44 1/2 38 1/4 36 3/4 Peak Combo HPCP 51-3/4 Rams Head Combo HRHCP 51-3/4 Sunburst Combo HSCP 51-3/4 Acorn Combo HACP 55 Distance between pilasters Crosshead HCP 55 Crosshead w/keystone HCKP / /2 41 1/2 40 Peak Combo HPCP 55 Rams Head Combo HRHCP 55 Sunburst Combo HSCP 55 Acorn Combo HACP 66-1/2 Distance between pilasters Crosshead HCP 66-1/2 Crosshead w/keystone HCKP 66-1/ / /2 Peak Combo HPCP 66-1/2 Rams Head Combo HRHCP 66-1/2 Sunburst Combo HSCP 66-1/2 47 1/2 51 1/2 51 3/4 56 3/ /2 70 1/2 HPSCP 20 3/ / /8 21 1/ /2 21 1/ /4 25 3/4 22 5/8 24 7/ /8 28 1/2 22 1/

53 Entrance Systems Pilaster Widths Description Part No. Bottom Width Top Width Height Projection 3 3/4 4 1/2 5 1/4 6 3/4 7 1/2 SINGLE DOOR OPENINGS Acorn Combo HACP 75-1/2 24 1/4 Distance between pilasters Crosshead HCP 75-1/2 6 Crosshead w/keystone HCKP 75-1/2 75 1/2 79 1/ / /2 Peak Combo HPCP 75-1/2 25 1/8 Rams Head Combo HRHCP 75-1/2 28 1/2 Sunburst Combo HSCP 75-1/2 24 1/4 Acorn Combo HACP 79-1/4 24 Distance between pilasters Crosshead HCP 79-1/4 6 Crosshead w/keystone HCKP 79-1/4 79 1/4 83 1/ /4 70 1/4 68 3/4 65 3/4 64 1/4 Peak Combo HPCP 79-1/4 31 3/4 3 Rams Head Combo HRHCP 79-1/4 28 5/8 Sunburst Combo HSCP 79-1/4 23 1/4 Acorn Combo HACP 83-1/4 26 Distance between pilasters Crosshead HCP 83-1/4 6 Crosshead w/keystone HCKP 83-1/4 83 1/4 87 1/ /4 74 1/4 72 3/4 69 3/4 68 1/4 Peak Combo HPCP 83-1/4 25 5/8 Rams Head Combo HRHCP 83-1/4 28 5/8 Sunburst Combo HSCP 83-1/4 25 1/4 Pilaster Widths Fluted Panel Plain Width Height Proj HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * 3 3/4 3 3/4 3 3/4 4 1/2 4 1/2 4 1/2 5 1/4 5 1/4 5 1/4 6 3/4 6 3/4 6 3/4 7 1/2 7 1/2 7 1/ /8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 Entrance Systems *Note: When supplied w/loose plinth, pilaster flutes will be continuous to the end. All sizes available with Loose Plinth - Specify LP Ex. HPIL LP Fluted Part No. Panel Part No. Plain Part No. Width HPLIN 160S-3-3/4 HPLIN 161S-3-3/4 HPLIN 162S-3-3/4 3 3/4 HPLIN 160S-4-1/2 HPLIN 161S-4-1/2 HPLIN 162S-4-1/2 4 1/2 HPLIN 160S-5-1/4 HPLIN 161S-5-1/4 HPLIN 162S-5-1/4 5 1/4 HPLIN 160S-6-3/4 HPLIN 161S-6-3/4 HPLIN 162S-6-3/4 6 3/4 HPLIN 160S-7-1/2 HPLIN 161S-7-1/2 HPLIN 162S-7-1/2 7 1/2 HPLIN 160S-9 HPLIN 161S-9 HPLIN 162S-9 9 Height 14 5/8 53

54 Entrance Systems Chart for Crossheads & Combination Crossheads/Pediments Entrance Systems Pilaster Widths Description Part No. Bottom Width Top Width Height Projection SINGLE DOOR Acorn Combo HAC Distance between pilasters Distance between pilasters Distance between pilasters Distance between pilasters Crosshead HC 50 Crosshead w/keystone HCK 50** Peak Combo HPC 50 Rams Head Combo HRHC 50 Sunburst Combo HSC 50 Acorn Combo HAC 54 Crosshead HC 54 Crosshead w/keystone HCK 54** Peak Combo HPC 54 Rams Head Combo HRHC 54 Sunburst Combo HSC 54 SINGLE DOOR & SINGLE DOOR W/SIDELIGHT Acorn Combo HAC 60 Crosshead HC 60 Crosshead w/keystone HCK 60** Peak Combo HPC 60 Rams Head Combo HRHC 60 Sunburst Combo HSC 60 Acorn Combo HAC 66 Crosshead HC 66 Crosshead w/keystone HCK 66** Peak Combo HPC 66 Rams Head Combo HRHC 66 Sunburst Combo HSC / / / / / /2 31 1/2 25 1/ Note: HCK** Height dimension includes keystone HAC HPC 54 HRHC HSC

55 Entrance Systems Pilaster Widths Description Part No. Bottom Width Top Width Height Projection SINGLE DOOR with 2 SIDELIGHTS & DOUBLE DOORS Acorn Combo HAC Distance between pilasters Distance between pilasters Distance between pilasters Chart for Crossheads & Combination Crossheads/Pediments Crosshead HC 78 Crosshead w/keystone HCK 78** Peak Combo HPC 78 Rams Head Combo HRHC 78 Sunburst Combo HSC 78 Acorn Combo HAC 82 Crosshead HC 82 Crosshead w/keystone HCK 82** Peak Combo HPC 82 Rams Head Combo HRHC 82 Sunburst Combo HSC 82 Acorn Combo HAC 86 Crosshead HC 86 Crosshead w/keystone HCK 86** Peak Combo HPC 86 Rams Head Combo HRHC 86 Sunburst Combo HSC 86 Acorn Combo HAC 94 Distance between pilasters Crosshead HC 94 Crosshead w/keystone HCK 94** Peak Combo HPC 94 Rams Head Combo HRHC 94 Sunburst Combo HSC 94 Note: HCK** Height dimension includes keystone / / / / Entrance Systems HC HCK MADE IN THE USA CUSTOM ENTRANCE SIZES & STYLE AVAILABLE. CALL OR FAX US 55

56 Entrance Systems Entrance Systems *Note: When supplied w/loose plinth, pilaster flutes will be continuous to the bottom. FLUTED PANEL PLAIN Width Height Projection HPIL HPIL * HPIL HPIL * HPIL HPIL * HPIL * HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL * HPIL HPIL * HPIL HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL HPIL * HPIL * HPIL * HPIL HPIL * HPIL * HPIL * /8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 Pilaster Widths Fluted Part No. Planel Part No. Plain Part No. Width HPLIN 260S-3 HPLIN 261S-3 HPLIN 262S-3 3 HPLIN 260S-4 HPLIN 261S-4 HPLIN 262S-4 4 HPLIN 260S-5 HPLIN 261S-5 HPLIN 262S-5 5 HPLIN 260S-6 HPLIN 261S-6 HPLIN 262S-6 6 HPLIN 260S-7 HPLIN 261S-7 HPLIN 262S-7 7 HPLIN 260S-8 HPLIN 261S-8 HPLIN 262S-8 8 HPLIN 260S-9 HPLIN 261S-9 HPLIN 262S-9 9 HPLIN 260S-10 HPLIN 261S-10 HPLIN 262S HPLIN 260S-11 HPLIN 261S-11 HPLIN 262S HPLIN 260S-12 HPLIN 261S-12 HPLIN 262S Height Pictured: HPLIN 200S-7 Note: These loose plinths fit the 200 series pilasters (260, 261, 262). MADE IN THE USA

57 Entrance Systems HDSC HCC Height: 7 1/2 x Projection: 6 HLC Height: 18 x Projection: 6 AVAILABLE WITH KEYSTONE HLPP CUSTOM ENTRANCE SIZES & STYLE AVAILABLE. CALL OR FAX US Height: 18 x Projection: 6 HCCK Height: 18 x Projection: 6 HLAP Height: Varies x Projection: 6 Height: Varies x Projection: 6 HVP 1 HVP 2 Entrance Systems 57

58 Gable Decorations Gable Decorations HGD 200 Height: Specify Width: Specify Projection: 1 Pitch: Specify HGD 300 Height: Specify Width: Specify Projection: 2-3/4 Pitch: Specify HGAB Height: 26-3/4 Width: 79-7/8 Projection: 2 Pitch: 8/12 Pictured: HGAB MADE IN THE USA HGAB Height: 26-3/4 Width: 79-3/4 Projection: 3 Pitch: 8/12 Pictured: HGAB CUSTOM SIZES & STYLE AVAILABLE. CALL OR FAX US.

59 Miscellaneous HSPAN 91x94 Height: 91 3/4 x Length: 94 x Proj: 2 HPAN 12x94 Height: 12-1/2 Length: 94 Proj: 2 HCPAN 29 Height: 29 Length: 29 Projection: 2 HPAN 19x79 Height: 19-1/2 Length: 79-3/8 Projection: 2 HLP Height: 93 Width: 5-1/2 HCAP Height: 9-1/4 Width: 21-5/8 Projection: 10-3/4 Miscellaneous HDE 159 Height: 9-3/4 Width: 5-3/4 HDE 262 Height:6-1/2 Width: 20 HDE 2 Height: 7-3/4 Width: 7-3/4 Porj: 7/8 Custom lengths available Projections available: 5 to 11 Part No. Width Height HPIL HPIL HPIL HPIL HPIL HBAS Height: 10-7/8 Width: 20-3/8 Projection: 10-1/4 59

60 Micellaneous NICHES Miscellaneous 60 HNIP 3 Height: 4 Diameter: 2-1/4 HDKST 39 Height: 5 Top Width: 4-1/2 Bottom Width: 3 Projection: 1-5/8 HNIC Height: 42-1/2 Width: 16-5/8 Depth: 4 HRAFT 470 HNIC Height: 39-1/4 Width: 16-5/8 Depth: 4 NIPS & BIPS HBIP 1 Height: 1-5/8 Diameter: 2 KEYSTONES HDKST 40 Height: 8-3/4 Top Width: 6-3/4 Bottom Width: 4-3/4 Projection: 1-3/4 HRAFT 424 Height: 8 Width: 4 Length 96 RAFTER TAILS Height: 11 Width: 6 Projection: 40 HRAFT 490 Height: 8 Width: 3-1/2 Projection: 40 HBIP 2 Height: 1-3/4 Diameter: 2 HDKST 1025 Height: 15 Top Width: 11 Bottom Width: 6-1/4 Projection: 5 HRAFT 460 Height: 12 Width: 6 Projection: 48 HRAFT 480 Height: 11 Width: 5 1/2 Projection: 44 CUSTOM SIZES AND STYLES AVAILABLE CALL OR FAX US

61 Miscellaneous HURN 11* Height: 11-1/4 Base Dia: 5-1/4 HURN 15* Height: 15-1/4 Base Dia: 6-1/4 HURN 717* Height: 17 Base Dia 5-1/2 HURN 820* Height: 20 Diameter: 6-3/4 HACO 10* Height: 9-3/4 Diameter: 4-1/2 HACO 12* Height: 11 Diameter: 6-1/8 Pictured: HPIN 14 HPIN 11* Height: 11 Diameter: 5 HPIN 14* Height: 14 Diameter: 6-1/2 HPIN3 Height: 4 Diameter: 2-1/2 HMIS 15 Height: 15 Width: 11 Projection: 3-3/8 *These parts come cut in half as well. Specify this by adding an -H to the end of the part number. (Ex. HPIN 11-H) Miscellaneous HBAL Height: 11-1/4 Diameter: 5-1/4 MADE IN THE USA SPANDREL BALUSTER Available in Lengths 61

62 Micellaneous HROS 1 Diameter: 11 Projection: 2-3/4 ROSETTES HROS 2 Height: 3-3/4 Width: 3-3/4 Projection: 1 Miscellaneous HROS 24 Height: 4-1/4 Width: 4-1/4 Projection: 1 HROS 3 Height: 4-1/2 Width: 4-1/2 Projection: 3 5/8 HROS 9 Height: 6-1/2 Width: 6-1/2 Projection: 1-1/8 HROS 4 Height: 5-3/8 Width: 5 3/8 Projection: 1 Chamfered Edge Block Available in Any Size HROS 13 Height: 5-1/2 Width: 5 1/2 Projection: 1 CEILING MEDALLIONS HROS 71 Height: 3-3/4 Width: 3-3/4 Projection: 1-3/16 HROS 5 Height: 2-1/8 Width: 5-1/2 Projection: 5-1/2 62 HCM Diameter: 24-1/2 Projection: 1-3/4 MADE IN THE USA HCM Diameter: 27-3/4 Projection: 2-3/4 HCM Diameter: 31 Projection: 2 HCM Diameter: 27-3/4 Projection: 2-3/4 HCM Diameter: 31 Projection: 2-3/4 Haas Architectural Millwork, Inc. has the ability to accommodate all your custom needs. Please call or fax us for a quote. Ph. (717) Fax (717)

63 Installation Guide HAAS ARCHITECTURAL MILLWORK, INC. BALUSTRADE/RAILING SYSTEM INSTALLATION INSTRUCTIONS *Haas Architectural Millwork, Inc is a manufacturer of quality molded urethane. Our product is designed to withstand moisture, insects, and the outside elements. Our millwork has a painted finish that is chemically bonded during the molding process. This base coat will not peel or crack. An additional primer is applied prior to shipping. We do recommend top-coat painting mouldings with an exterior paint. Most states use the 4 BALL RULE to meet building code regulations. This rule is that a 4 ball cannot pass through the widest opening between balusters. Structural integrity is the responsibility of the installer. Custom items cannot be returned or cancelled once the production has already begun. All products that have been approved by Haas Architectural Millwork, Inc. for return must be shipped prepaid and a 20% restocking fee will be assessed. Parts that have been installed, painted, or modified in any way may not be returned. Proper safety procedures are to be used when installing, sanding, or sawing our product, such as wearing safety glasses and a dust mask. Urethane dust can be irritating and should not be inhaled. Using Haas Architectural Millwork, Inc. products does not contribute to depleting our valuable forests. Haas Architectural Millwork, Inc. products should be stored in the temperature conditions in which they will be installed. Haas Architectural Millwork, Inc. warrants all of its products against defects in materials and workmanship for a period of 5 years from the date of purchase, when used and installed under recommended conditions. Haas Architectural Millwork, Inc. offers balusters with extensions on top and bottom for stair application. Installation Guide 63

64 Installation Guide Installation Guide 64 Newel Post Installation Kit (Order 1 kit per Newel Post) Kit Number* Newel Posts HNPK Fits all 4 newel posts HNPK Fits all 5 1/2 newel posts HNPK Fits all 8 newel posts HNPK Fits all 9 newel posts HNPK Fits all 10 newel posts HNPK Fits all 12 newel posts *Note: Newel Kits are available for either wood or concrete applicataion. To specify please add -W for wood or -C for concrete to the end of the kit number. Ex. (HNPK W or HNPK C) MADE IN THE USA Wood Kit 1. One floor flange 2. Four 3/8 x 2 lag bolts 3. One 1/2 x 48 threaded rod 4. One C channel 5. One 1/2 flat washer 6. One 1/2 lock washer 7. One 1/2 Nut Concrete Kit 1. One floor flange 2. Three 3/4 x 2 1/4 concrete wedge bolts 3. One 1/2 x 48 threaded rod 4. One C channel 5. O ne 1/2 flat washer 6. One 1/2 lock washer 7. One 1/2 nut Railing Installation Kit (Order 1 kit per Top & Bottom Rail Section) Kit Number Fits These Rails HRK 200 HTR 200, HBR 201, HTR 210, HBR 211 HRK 204 HTR 202, HBR 203, HTR 204, HBR 205, HTR 212 HRK 206 HTR 206, HBR 207, HTR 214, HBR 215 HRK 208 HTR 208, HBR 209, HTR 216 *Note: Stair Kits are available. Please call with tread and riser sizes. Railing Kit 1. Two pre-drilled aluminum angle brackets (Top Rail) 2. Two pre-drilled aluminum angle brackets w/ 5/16 tapped hole (Bottom Rail) 3. Eight #14 x 2 self tapping screws 4. Four 1/2 x 2 Panhead bolts 4. Two 5/16 x 1 1/2 hex head bolts **Curved Rails - use support blocks every 4 MADE IN THE USA

65 Installation Guide *IMPORTANT* STEP 1 Mark the layout line and center points of each porch post and newel post prior to installation. This is very important to ensure the accurate length for installing the top and bottom rails. Use 12 as the maximum railing length. STEP 2 WOOD DECKING INSTALLATON 1. Install blocking under where each newel s floor flange will be located. 2. Locate and center each floor flange and secure using 3/8 lag bolts. 3. Thread the 1/2 x 48 rod into the welded nut on the floor flange and tighten using vise grips. CONCRETE INSTALLATION 1. Mark anchor hole in floor flange. Drill a 3/8 hole 1 1/4 deep into the cured concrete. 2. Insert anchor and using a punch, set the anchor pin. STEP 3 1. Measure and combine the heights of the bottom rail and baluster (Distance X). This is the distance between the bottom of the angle brackets used to fasten railings to posts. 2. Mark the location and height of the bottom rail from the concrete or wood surface (Distance B). 3. Using the measurement of the rail and baluster (Distance X), locate the bottom of the top bracket. 4. Mark the top and bottom bracket on the newel post. 5. Mortise the newel post so that the face of the angle brackets are inset and are flush with the surface of the newel post. 6. Drill holes and secure angle brackets with #14 x 2 self tapping screws. Installation Guide STEP 4 1. Rout the top of the newel post to accept the C-channel. 2. If trim collars are being used, slide them on the bottom before placing the newel post over the floor flange. 3. Put the C-channel in place and secure loosely with the nut and lock washer. 65

66 Installation Guide Installation Guide STEP 5 1. Determine your rail length. 2. Cut top and bottom rail to proper size. 3. Mortise the bottom of each rail to accept the 2 1/2 aluminum angle. 4. Drill a single 5/16 hole in the bottom rail that corresponds with the single 5/16 threaded hole on the bottom 2 1/2 x 2 1/2 aluminum angle. 5. Mark a center line on rails. Mark the position of each baluster then drill a hole to accept the PVC pipe that extends out either end of the baluster. Standard hole saws work well for drilling these holes. 6. Apply a bead of urethane adhesive to the bottom of each baluster and place the balusters in the holes of the bottom rail. Apply a bead of urethane adhesive to the tops of each baluster and set the top rail on the balusters. Clamp together using strap clamps, making sure baluster blocks are square to the bottom and top rail. A straight strip of plywood wedged between the baluster blocks and strap clamps helps to align baluster blocks straight and parallel to the top and bottom rail. 7. Allow the adhesive to set for 12 hours. STEP 6 1. Remove the strap clamps from completed railing section. 2. Apply a small bead of urethane adhesive to the aluminum angles that are fastened to the newel posts, and to the ends of each top and bottom rail. 3. Leave the newel posts loose so you can slide the glued up rail section between them without smearing glue on exposed parts of the newel post. 4. Fit the mortises on the undersides of the rail onto the 2 1/2 x 2 1/2 aluminum angle that is mounted to the newel post. 5. Predrill 1/8 holes through the holes in the top aluminum plates into the PVC pipe. Install 2 #14 x 2 pan head self tapping screws. 6. Thread the 5/16 x 1 1/4 bolt through the bottom plate and into the 5/16 hole you drilled in the underside of the bottom rail. (*Note: This 5/16 threaded bolt does not provide downforce. It is intended to keep the rail from moving laterally. Typical installations do not have enough room between the decking and the underside of the bottom rail for the use of screws.) 7. After securing rail section to newel posts tighten up the nut on the newel post, securing it to the deck. 8. Apply a small bead of urethane adhesive to the top of the newel post and glue the newel cap in place. Small brad nails will keep the cap aligned until the glue sets. 66

67 Installation Guide STEP 7 1. After the glue dries, clean off excess with a sharp putty knife. Caulk any cracks with a good quality latext paintable caulk. 2. Haas Architectural Millwork, Inc. recommends applying a finish coat of latex paint to your railing system. Installation Guide MADE IN THE USA 67

68 Index Index 68 ARCHES Page BALUSTERS cont. Page BRACKETS cont. Page HARC Custom 39 HBAL HBKT HARC 900 & HBAL HBKT HARC HBAL HBKT HARC HBAL HBKT HARCK HBAL HBKT HEARC 39 HBAL HBKT BALLS Page HBAL HBKT HBALL to HBAL to 36 5 HBKT HBALL & HBAL & 28 8 HBKT HBAL HBKT BALUSTERS Page HBAL HBKT HBAL to 36 5 HBAL HBKT HBAL to 36 5 HBAL to 36 5 HBKT HBAL & 36 7 HBAL HBKT HBAL to 30 6 HBAL & Ext 7 HBKT HBAL to 30 6 BRACKETS Page HBKT HBAL to 30 7 HBKT HBKT HBAL HBKT HBKT HBAL to 35 8 HBKT HBKT HBAL to 37 7 HBKT HBKT HBAL & 31 8 HBKT HBKT HBAL to 35 9 HBKT HBKT HBAL to 36 5 HBKT BIP 20 HBKT HBAL HBKT HBKT HBAL & Ext 8 HBKT HBKT HBAL HBKT HBKT HBAL HBKT HBKT HBAL HBKT HBKT HBAL HBKT DENTIL BLOCKS Page HBAL HBKT HDB HBAL to 30 7 HBKT HDB HBAL & 34 7 HBKT HDB HBAL HBKT HDB HBAL HBKT HDB HBAL & 31 6 HBKT HDB HBAL HBKT HDB

69 Index DENTIL BLOCKS CROSSHEADS PEDIMENTS Continued Page Continued Page Continued Page HDB HC HACP 75-1/2 53 HDB HCK HACP 79-1/4 53 HDB 472 L-Pitch 18 HCK HACP 83-1/4 53 HDB 472 R-Pitch 18 HCK HPC HDB HCK HPC HDB HCK HPC HDB HCK HPC HDB HCK HPC HDB HCKP 47-1/2 52 HPC HDB HCKP 51-3/4 52 HPC HDB HCKP HPC HDB HCKP 66-1/2 52 HPCP 47-1/2 52 HDB HCKP 75-1/2 53 HPCP 51-3/4 50 HDB HCKP 79-1/4 53 HPCP HDB HCKP 83-1/4 53 HPCP 66-1/2 52 HDB HCP 47-1/2 52 HPCP 75-1/2 53 HDB HCP 51-3/4 52 HPCP 79-1/4 53 HDB HCP HPCP 83-1/4 53 HDB HCP 66-1/2 52 HRHC HDB 800 L-Pitch 20 HCP 75-1/2 53 HRHC HDB 800 R-Pitch 20 HCP 79-1/4 53 HRHC HDB HCP 83-1/4 53 HRHC HDB PEDIMENTS Page HRHC HDB HAC HRHC HDB HAC HRHC HROS 5 19 HAC HRHC ENTRANCE HAC HRHCP 47-1/2 52 SYSTEMS HAC HRHCP 51-3/4 52 CROSSHEADS Page HAC HRHCP HC HAC HRHCP 66-1/2 52 HC HAC HRHCP 75-1/2 53 HC HACP 47-1/2 52 HRHCP 79-1/4 53 HC HACP 51-3/4 52 HRHCP 83-1/4 53 HC HACP HSC HC HACP 66-1/2 52 HSC Index 69

70 Index Index 70 ENTRANCE SYSTEMS PEDIMENTS PILASTERS FLATBOARDS Page Continued Page Continued Page HFB /4x3 1/2 to HSC SERIES HFB x3 1/2 to HSC HPIL to HFB /2x3 1/2 to HSC HPIL to GABLE DECORATIONS HSC HPIL to HGD HSC HPIL to HGD HSC HPIL to HGD Custom 58 HSCP 47-1/2 52 HPIL to HGAB HSCP 51-3/4 52 HPIL to HGAB HSCP HPIL to KEYSTONES. HSCP 66-1/2 52 HPIL to HDKST HSCP 75-1/2 53 HPIL to HDKST HSCP 79-1/4 53 HPIL to HDKST HSCP 83-1/4 53 HPIL to HKST PILASTERS HPIL to HKST SERIES HPIL to HKST HPIL to HPIL to HKST HPIL to HPIL to HKST HPIL to HPIL to HKST HPIL to HPIL to HKST HPIL to LOOSE PLINTHS HKST HPIL to HPLIN 100S-3 to 9 53 HKST HPIL to HPLIN 100S-3 to HKST HPIL to ENTRANCE SYSTEMS HKST HPIL to CUSTOM LOUVERS HPIL to HCC 57 CIRCLE TOP HPIL to HCCK 57 HCTL 12x24 & HPIL to HDSC 57 HCTL 18x30 41 HPIL to HLC (K) 57 HCTL 22x32 41 HPIL to HLAP 57 DIAMOND HPIL to HLPP 57 HDL SERIES HVP 1 57 HDL HPIL to HVP 2 57 HPIL to HPIL to

71 Index LOUVERS MISCELLANEOUS Continued Page CEILING MEDALLIONS HROS EYEBROW HCM RAFTER TAILS HETL 12x24 42 HCM HRAFT HETL 18x30-C 42 HCM HRAFT HETL 22x32-C 42 HCM HRAFT HALF ROUND HCM HRAFT HHRL 22to DECORATIVE COLUMN HRAFT HALF ROUND w/keys HCAP HRAFT HHRKL 36- to HBAS SCROLLED PANELS OCTAGONAL HCOL Custom 59 HCPAN HOCL 22 & 24-C 42 DECORATIVE ELEMENTS HPAN 12X94 59 OVAL HDE 2 59 HPAN 19X79 59 HOVL 28X35 42 HDE HSPAN 91X94 59 RECTANGLE HDE SPANDREL PARTS HRECTL 12x18 to HMIS HBAL HRECTL 16x24 to LAMP POST SUPPORT BLOCKS HRECTL 18x24 to HLP HSB & 20 HRECTL 24x30 to NICHE URNS ROUND KEYSTONE HNIC HURN 11 & HRKL 24 to HNIC HURN ROUND NIPS & BIPS HURN HRL 18 to HNIP 3 60 TRIANGLE HBIP 1 60 HTL 6x48 42 HBIP 2 60 HTL 6x76 42 PINEAPPLES MOULDINGS HTL 6x88 42 HPIN HMLD HTL 6x HPIN HMLD HTL 8x64 42 HPIN 3 61 HMLD HTL 10x64 42 ROSETTES Page HMLD HTL 12x36 42 HROS 1 62 HMLD HRO 2 62 HMLD MISCELLANEOUS ACORNS HROS 3 62 HMLD HACO HROS 9 62 HMLD HACO HROS HMLD HROS HMLD Index 71

72 Index 72 Index MOULDINGS cont. Page MOULDINGS cont. Page MOULDINGS cont. Page HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD 1070-R-Pitch 38 HMLD HMLD HMLD 1070-L-Pitch 38 HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD 1049-L-Pitch 38 HMLD HMLD HMLD 1049-R-Pitch 38 HMLD , 38 HMLD HMLD HMLD 1079-R-Pitch 38 HMLD HMLD HMLD 1079-L-Pitch 38 HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD HMLD

73 Index MOULDINGS cont. Page RAILING WINDOW HEADS HMLD BOTTOM RAILS Page Continued Page HMLD HBR to HWH HMLD HBR to HWHK HMLD HBR to HWH HMLD HBR to HWHK HMLD HBR to HWH HMLD HBR to HWH HMLD HBR to HWH HNLD HBR to HWH HMLD HBR to HWH HMLD TOP RAILS HWH HMLD HTR t HWH HMLD HTR to HWH 911-O 45 HMLD HTR to HWH HMLD HTR to HWH NEWEL CAPS Page HTR to HWH HANC to HTR to HWHS HFNC to HTR to HWH HFNC to HTR to HWH HFPNC & HTR to HWH HNC to HTR to HWH HNC SHUTTERS HWH HPNC to HLS 18X24 TO WINDOW PANELS Page HPNC to HPS 18X24 TO HWP BS-P-26x36 49 NEWEL POSTS HBBS 18X24 TO HWP BS-RP-26x36 49 HWP RP-10x14 49 HAPNP & WINDOW HEADS HCFPNP & HARC 900 & HWP RP-14x22 49 HCNP HDH HWP RP-14x24 49 HNP to HDP 44 & HWP WG-RP-10x14 50 HNP HEWH HWP WG-RP-14x22 50 HPNP to HWH HWP WG-RP-14x24 50 HSNP to HWHK HWP4 22X28 51 NEWEL TRIM COLLARS HWH HWP4 28X40 51 HTC 6 to HWHK HWH HWHK MADE IN THE USA Index 73

74 Haas Architectural Millwork, Inc. Ph Fax Fax Cover Sheet From: To: Fax Number: Date: Company: Phone Number: Number of pages including cover: To Order Specify: 1) Arch Moulding - (HMLD 1046, HMLD 1033, HMLD ) 2) Arch Size - (24 up to 72 Available) 3) Keystone (K) No Keystone 4) Wing Style - HWH 900, HWH 901, or HWH 902 5) Wing Length - Size (Standard Size up to 42, 43 Up Custom) 6) Arch Closed or Open -(HWH 911 OR HWH911-O, HWH 937) EXAMPLES: With Keystone and Sunburst Without Keystone and Sunburst HARCK HARC

75 Thanks for choosing... HAAS ARCHITECTURAL MILLWORK, INC. MADE IN THE USA 75

76 Proudly made in the USA HAAS Architectural Millwork Proudly manufactured in the USA Distributed by: 1st Edition Printed in USA 4/2011