4 3 FSPA. End Suction Pumps *) Horizontal Split Case Pumps **) FEATURES

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "4 3 FSPA. End Suction Pumps *) Horizontal Split Case Pumps **) FEATURES"

Transcription

1

2 FEATURES. Non Overload design to ensure stable performance for all applications 2. Corrosion resistant materials used on the rotating parts 3. Hydraulically balanced impeller extends bearing life and assures smoother operation. Fully compliance to NFPA 20 and certified by Underwriters Laboratories (UL) End Suction Pumps *). Easy removal and maintenance, BPO (Back Pull Out) system allows all rotating elements to be removed without disconnecting suction and discharge pipe work. 2. Top centreline discharge, foot support under casing for maximum resistance to misalignment and distortion from pipe loads. 3. Flow rate capacity 20 up to 70 USGPM.. Working pressure up to 20 psi with 20 lb. ANSI Flanges. *) UL File Number EX8 Horizontal Split Case Pumps **). Very compact design for easy of installation and permits minimum maintenance. 2. Axially split casing allows the easy removal of the top casing for inspection and service. 3. Available in horizontal or vertical configuration.. Available in clockwise or counter clockwise rotation to simplify pump room layout.. Flow rate capacity 00 up to 20 USGPM. 6. Working pressure up to 20 psi with 20 lb. ANSI Flanges. **) UL File Number EX8 MODEL CODE 3 FSPA Model : FSPA (End Suction) CNPA (Horizontal Split Case) Discharge size (inch) Suction size (inch)

3 SPECIFICATIONS Item Specifications Liquid handled property Clean water, C (32 to 76 0 F) Max. Working Pressure Approx. speed Construction Flange Material Standard Accessories 20 psi rpm Impeller Enclosed Shaft seal Gland Packing Flushing Self Flushing Bearing Shield Ball Bearing Suction ANSI 20 Discharge ANSI 20 Casing Ductile Cast Iron (FCD0) for FSPA model Cast Iron (FC20) for CNPA model Impeller Bronze casting (CAC06) Shaft Stainless Steel (SUS36) Shaft Sleeve Bronze Casting (CAC06) Gland Packing Teflon (PTFE) Impregnated Pressure Gauge Compound Gauge Air Relieve Valve psi 30 in Hg 60 psi standard SELECTION CHART End Suction Pump Split Case Pump 2

4 SECTIONAL VIEW End Suction Pump 2 Gland bolt Brass 2 06 Ball bearing 2 03 Bearing cover 09 Gland Cast iron (FC200) 0 Bearing housing 08 Lantern ring 08 Impeller nut Brass 02 Shaft sleeve 03 Shaft Stainless steel (SUS36) 9 Gland packing Carbonized fibre 206 Priming plug Bronze (CAC06) Stainless steel (SUS30) 02 Impeller Bronze (CAC06) 07 2 Casing wear ring Bronze (CAC06) 0 Casing cover Ductile cast iron 07 Casing wear ring 00 Casing (FCD0) 09 Stay Steel No. Part Name Material Qty No. Part Name Material Qty 3

5 SECTIONAL VIEW Horizontal Split Case Pump 03 2 Bearing cover (CCP side) 29 Grease nipple C360BD F Cast iron (FC200) 03 Bearing cover (CP side) 6 Lock pin SUS Bearing unit (CCP side) 36 Bearing washer Cast iron 0 Bearing unit (CP side) 29 Bearing nut Steel (SS00) 02 2 Shaft sleeve (CCP side) 2 Gland bolt C360BD F Bronze (CAC06) 02 Shaft sleeve (CP side) 9 2 Gland packing (CCP side) Carbonized fibre Coupling key Steel (S0C) 9 Gland packing (CP side) 039 Impeller key Stainless steel 7 Gasket (casing) V# Shaft (SUS36) 07 2 Casing wear ring (CCP side) Bronze (CAC06) 02 Impeller Bronze (CAC06) 07 Casing wear ring 08 2 Bearing support (CCP side) Deflector (CCP side) Cast iron (FC200) Rubber 08 Bearing support (CP side) 093 Deflector (CP side) 0 2 Side cover (CCP side) 09 2 Gland (CCP side) 0 Side cover (CP side) 09 Gland (CP side) Cast iron (FC20) 006 Casing lower half Lantern ring (CCP side) Bronze (CAC06) 00 Casing upper half 090 Lantern ring (CP side) No. Part Name Material Qty No. Part Name Material Qty

6 DIMENSION End Suction Pump Flange Unit: Inch (mm), unless otherwise stated D f e g t t n h (20) (68) () (.6) (29) (22) 3 (80) (00) (2) 6 (0) 0 (2) (279) 2 (38) 7 (200) 9 (23) 0 (270) 6 (76) (.6) 8 (2) (.6) 9 (26) (.6) (32) (3) (37) (22) (22) (22) Model 3 FSPA Size Pump Shaft Wt Ds Dd A B C D E F G J M N O P R X Z T Q U V kg (00) (80) (00) (360) (200) (20) (280) (20) () (80) (360) (60) (0) (0) (7) (28) (9) (32) (80) (8) (0) FSPA (2) (00) (0) (360) 8 (22) (280) 2 (3) (20) () 3 (80) (00) 6 (60) (0) (0) (7) (370) (9) (2) 3 (9) (8) (2) 2 6 FSPA 6 (0) (00) (0) 20 (30) 9 (20) 2 (3) 2 (3) (20) () 3 (80) (00) 6 (60) (0) (0) (7) (370) (9) (2) 3 (9) (8) (2) 6 Horizontal Split Case Pump Model CNPA Unit: Inch (mm), unless otherwise stated Size Pump Shaft Wt Ds Dd A B C E F G H I J K M N O P Q L T U V kg (2) (00) (326) (0) (29) (300) (20) (9) (0) (60) (60) (70) (300) (290) (20) (230) (20) (80) (38) (8) (0) 6 CNPA 6 (0) (2) (36) 9 (0) 3 (3) 3 (330) 0 8 (260) (22) 7 7 (90) (90) 3 3 (80) (90) (380) 2 (360) (30) 0 (270) (2) 3 (90) (8) (9) () 283

7 SELECTION DATA End Suction Pump Flow Rate 20 USGPM (7 /h) 300 USGPM (68 /h) 30 USGPM (80 /h) 00 USGPM (9 /h) 0 USGPM (02 /h) 00 USGPM (3 /h) 70 USGP (70 /h) Head Max. Power Pump Model at rpm Electric motor PSI (kpa) HP RPM HP 87 (600) (72) FSPA 22 (8) (98) 0 8 (86) (703) FSPA 2 (83) (9) 82 (6) (689) FSPA 9 (820) 0 36 (937) (38) (669) FSPA 7 (806) (97) 73 (03) (6) FSPA 3 (779) (889) (0) (93) FSPA 0 (696) (800) 26 (869) (993) (7) 6 FSPA (262) 2 20 (3) (69) (6) 63 7 FSPA 97 (669) (772) (779) (90) (08) 6 FSPA 2 7 (206) (36)

8 SELECTION DATA Horizontal Split Case Pump Flow Rate 00 USGPM (3 /h) 70 USGPM (70 /h) 000 USGPM (227 /h) 20 USGPM (28 /h) Head Max. Power Pump Model at rpm Electric motor PSI (kpa) HP RPM HP 8 (8) (620) (689) 60 CNPA (786) (862) (9) 69 (76) (3) (6) 60 CNPA 0 (696) 60 7 (786) (882) (669) (7) (827) 6 CNPA (90) 2 6 (007) (63) (70) 02 2 (793) 6 CNPA 2 28 (882) (979) 0 8 (86) (669) (78) 6 CNPA (8) (9)

9 8

10 9

11 0

12

13 2

14 EBARA CORPORATION, Japan Website : EBARA PUMPS EUROPE S.p.A., Italy Website : SUMOTO S.r.I., Italy Website : EBARA ESPAÑA BOMBAS, S.A., Spain Website : EBARA INTERNATIONAL CORPORATION, U.S.A. Website : EBARA INDǓSTRIAS MECÂNICAS E COMÉRCIO LTDA., Brazil Website : EBARA MACHINERY (CHINA) CO., LTD., P.R.China Website : EBARA- DENSAN TAIWAN MANUFACTURING CO., LTD., R.O. China-Taiwan Website : EBARA (THAILAND) LIMITED, Thailand Website : PT. EBARA INDONESIA, Indonesia Website : EBARA PUMPS MALAYSIA SDN. BHD., Malaysia Website : EBARA BENGUET, INC., Philippines Website : EBARA ENGINEERING SINGAPORE PTE, LTD., Singapore Website : EBARA PUMPS AUSTRALIA PTY. LTD., Australia Website : Distributor / Dealer All specification subject to change without prior notice 3

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.

More information

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made

More information

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.

More information

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.

More information

PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.

PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD. END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,

More information

MDM. Magnetic drive pumps Magnetic drive process pump resistant to dry run damage. Magnetic drive pumps. series

MDM. Magnetic drive pumps Magnetic drive process pump resistant to dry run damage. Magnetic drive pumps. series MDM series Magnetic drive pumps Magnetic drive process pump resistant to dry run damage Magnetic drive pumps The MDM Series of Magnetic drive process pumps have wetted parts made of fluororesin. Patent

More information

High Temperature Chemical Process Inline Pumps

High Temperature Chemical Process Inline Pumps Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167

More information

900 Series Split Case Fire Pump Systems

900 Series Split Case Fire Pump Systems BULLETIN 900/REV. E 900 Series Split Case Fire Pump Systems MODEL 481 MODEL 483 FM Approved U L Listed motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48

More information

HORIZONTAL DOUBLE SUCTION VOLUTE PUMPS

HORIZONTAL DOUBLE SUCTION VOLUTE PUMPS HORIZONTAL DOUBLE SUCTION VOLUTE PUMPS APPLICATIONS Buildings Water supply Drainage Water circulation Fire fighting Air conditioning Irrigation Water supply Drainage Waterworks FEATURES Split case design

More information

CNPA. 50 Hz. EBARA Corporation. EBARA Pumps Europe network. Head Office

CNPA. 50 Hz. EBARA Corporation. EBARA Pumps Europe network. Head Office FIRE-FIGHTING SETS with Split-case pumps 50 Hz EBARA Pumps Europe network Head Office Italian Sales Network Export Network EBARA Pumps Europe S.p.A. Via Pacinotti, 3 36040 Brendola (VI), Italy Phone +39

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM

More information

CENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS

CENTRIFUGAL PUMPS CLOSE-COUPLED 9 FEATURES SPECIFICATIONS APPLICATIONS FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced

More information

Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL

Discharge diameters 1.5, 2, 3, 4, 5, 6, 8, 10, 12 & 14 HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft

More information

Goulds Small Capacity Double Suction Pump

Goulds Small Capacity Double Suction Pump Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to

More information

High Temperature Air-Cooled Hot Oil Pumps

High Temperature Air-Cooled Hot Oil Pumps Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required

More information

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min

More information

Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81

Approved. Size L H. 3 (76mm) 9-1/2 (241mm) 5-51/64 (147mm) 46. 4 (102mm) 11-1/2 (292mm) 6-45/64 (170mm) 81 pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550

More information

CENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES

CENTRIFUGAL PUMPS SAE ENGINE DRIVE 10 FEATURES FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics

More information

Model 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS

Model 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in

More information

Centrifugal End Suction Fire Pumps

Centrifugal End Suction Fire Pumps Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These

More information

Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining

Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high

More information

CRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38

CRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38 CRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38 1 ease of installation & maintenance Install like a valve Mount in the pipeline Support on pipe or foundation... Save space - save time

More information

Technical Data DML. Submersible Sewage Pumps with Single Channel Impeller. DML_Techdata_SS_V11 EBARA PUMPS AUSTRALIA PTY. LTD.

Technical Data DML. Submersible Sewage Pumps with Single Channel Impeller. DML_Techdata_SS_V11 EBARA PUMPS AUSTRALIA PTY. LTD. Technical Data DML Submersible Sewage s with Single Channel Impeller AUSTRALIA PTY. LTD. DML_Techdata_SS_V Contents -SPECIFICATIONS FEATURES & APPLICATIONS TYPICAL EXPLODED VIEW SPECIFICATIONS SELECTION

More information

Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9

Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9 Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an

More information

High Temperature Air-Cooled Hot Oil Pumps

High Temperature Air-Cooled Hot Oil Pumps Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series

More information

Bulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter

Bulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)

More information

EFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:

EFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date: Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation

More information

Ford Brass Saddles Style 101B and 202B

Ford Brass Saddles Style 101B and 202B 101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,

More information

900 Series. 2000/2500 GPM High Head. Expanding our line to meet your needs. Model Latest Addition to the Aurora Fire Pump Line

900 Series. 2000/2500 GPM High Head. Expanding our line to meet your needs. Model Latest Addition to the Aurora Fire Pump Line Latest ddition to the urora Fire Pump Line 9 Series /2 GPM High Head Model FLOWS@PESSUES GPM 11-214 PSI 2 GPM 115-215 PSI SPEEDS Diesel Electric PM 148 PM 17 PM 177 PM Max case working pressure 3 PSI Expanding

More information

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates

More information

CENTRIFUGAL PUMPS 13" CLOSE-COUPLED FEATURES

CENTRIFUGAL PUMPS 13 CLOSE-COUPLED FEATURES FEATURES Volute: Cast iron for heavy-duty service; back pull-out design; can be rotated for ease of installation; split volutes for reduction in radial bearing load (6 x 8-13 and 8 x 10-13) Impeller: Enclosed

More information

EVMU. Model EVMU / EVMUG / EVMUL Contents. EBARA Stainless Steel Vertical Multistage

EVMU. Model EVMU / EVMUG / EVMUL Contents. EBARA Stainless Steel Vertical Multistage Model / G / L Contents Item No. Specifications Selection Performance Pump Sectional Chart Curve Dimensions View 3 5 10 18 G32 G45 G64 L3 L5 L10 L18 L32 L45 L64 803 804 803 804 805 806 807 808 809 810 811

More information

TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and

More information

Spherical Roller Bearings

Spherical Roller Bearings Spherical Roller Bearings Introducing the newest series of advanced, high performing spherical roller bearings offering higher speed and load capacities suitable for a wide variety of industrial applications.

More information

ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.

ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps. ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials

More information

End suction back pull-out pumps for general industry, mining, rural and building services

End suction back pull-out pumps for general industry, mining, rural and building services End suction back pull-out pumps for general industry, mining, rural and building WHY COMPROMISE? The TKL KL-ISO end suction, back pull-out pump range is anything but ordinary it is the result of an intensive

More information

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135

More information

University of Houston Master Construction Specifications Insert Project Name

University of Houston Master Construction Specifications Insert Project Name SECTION 23 30 00 - HVAC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section 23 01 00, "Mechanical

More information

The PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin.

The PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin. The PL Series Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger Crispin Since 1905 PL SERIES Functio n Allows air and/or gas to be released from a pressurized liquid system

More information

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017 SECTION 23 2123 - PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

TRIMLINE CARTRIDGE FILTERS

TRIMLINE CARTRIDGE FILTERS TRIMLINE CARTRIDGE FILTERS Owners Manual! WARNING This equipment must be installed and serviced by a qualified technician. Improper installation can create electrical hazards which could result in property

More information

Fire Protection. FP-XA End Suction

Fire Protection. FP-XA End Suction Fire Protection FP-XA End Suction PRODUCT BULLETIN MODEL FP-XA END SUCTION CPS Model FP-XA End Suction pumps are used in a variety of fire fighting applications. These rugged and efficient centrifugal

More information

Stafsjö s ATEX solutions for category 1 D (Zone 20)

Stafsjö s ATEX solutions for category 1 D (Zone 20) Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D

More information

Goulds Severe Duty Slurry Pump

Goulds Severe Duty Slurry Pump Goulds 5500 Severe Duty Slurry Pump 5500 Proven leadership in mining and mineral processing Proven Leadership 100 years of slurry pumping experience. Many industry firsts including: hard metal slurry pump,

More information

Contents. Identification

Contents. Identification Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions

More information

Self-Priming Fiberglass Pumps

Self-Priming Fiberglass Pumps Fybroc Division SERIES 16 Self-Priming Fiberglass Pumps B U L L E T I N 16B1 FYBROC THE LEADER IN CORROSION-RESISTANT FIBERGLASS PUMPING EQUIPMENT Fybroc is the leading manufacturer of fiberglass reinforced

More information

Installation Instructions

Installation Instructions Installation Instructions CPM Series Dual, cartridge mounted, flexible stator pusher seal designed for general service applications CPM PP Experience In Motion Description The CPM PP seal is a cartridge

More information

HORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST

HORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST Section Tab 1200 SINGLE STAGE DOUBLE SUCTION Section 1210 List Prices Removed 07-01-02 Use Rapid Section 1220 Data Page 0.1 & (Blank)(03-30-07) 1 & 2 (03-30-07) 2.1 & 2.2 (03-30-07) 2.21 & 2.22 (03-30-07)

More information

TSUBAKIMOTO CHAIN CO.

TSUBAKIMOTO CHAIN CO. TSUBAKIMOTO CHAIN CO. United States of America U.S. TSUBAKI POWER TRANSMISSION, LLC +1 847-459-9500 http://ustsubaki.com/ Brazil TSUBAKI BRASIL EQUIPAMENTOS INDUSTRIAIS LTDA. +55 11-3253-5656 http://tsubaki.ind.br/

More information

EAN PUMP SERIES DL200/DL230

EAN PUMP SERIES DL200/DL230 A Met-Pro Fluid Handling Technologies Business Combining the Resources of Dean Pump, Fybroc & Sethco DEAN PUMP SERIES DL200/DL230 Inline Centrifugal Process Pumps D A T A P A K Section DL200/DL230 SERIES

More information

CVM VERTICAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS. 60 Hz

CVM VERTICAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS. 60 Hz 60 Hz Cast iron vertical multistage centrifugal electric pumps. APPLICATIONS Pressure boosting plants General pressure increases Irrigation Washing plants Moving clean water TECHNICAL DETAILS Reliable

More information

Series Split Coupled Vertical In-Line Pumps. File no.: 43.10in Date: august 14, 2013 Supersedes: 43.10in Date:

Series Split Coupled Vertical In-Line Pumps. File no.: 43.10in Date: august 14, 2013 Supersedes: 43.10in Date: Series 00 Split Coupled Vertical In-Line Pumps File no.:.0in Date: august, 0 Supersedes:.0in Date: february 0, 0 Series 00 Best commercial hvac pump design available since 99 Life cycle value at every

More information

Solutions beyond products...

Solutions beyond products... ORIGINAL INSTRUCTIONS IH102C Installation, Operation & Maintenance Manual Model B177 External Automatic Bypass Valve Model B177 External Automatic Bypass Valve Warning: (1) Periodic inspection and maintenance

More information

Technology and Innovation Serving the Petroleum Industry

Technology and Innovation Serving the Petroleum Industry Technology and Innovation Serving the Petroleum Industry CPC Pumps International Inc. Your Business Partner for the Hydrocarbon Industry Product Range and Services. CPC Pumps International Inc. offers

More information

SECTION PUMPS GENERAL PUMPS PART RELATED DOCUMENTS

SECTION PUMPS GENERAL PUMPS PART RELATED DOCUMENTS SECTION 15160 - PUMPS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS and Section 15030, ELECTRICAL REQUIREMENTS FOR MECHANICAL

More information

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps 855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPP. Heavy Duty, Single Stage ANSI Chemical Process Pump

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPP. Heavy Duty, Single Stage ANSI Chemical Process Pump N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPP For more than 0 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is an innovative

More information

GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN

GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.

More information

The Orion series of Heavy & mining duty horizontal slurry pumps

The Orion series of Heavy & mining duty horizontal slurry pumps The Orion series of Heavy & mining duty horizontal slurry pumps The Orion series of Heavy and mining duty rubber lined and me The Metso heavy (HM, HR) and mining (MR, MM) duty horizontal slurry pumps offer

More information

CENTRIFUGAL PUMPS HYDRAULIC DRIVEN 9" FEATURES SPECIFICATIONS APPLICATIONS

CENTRIFUGAL PUMPS HYDRAULIC DRIVEN 9 FEATURES SPECIFICATIONS APPLICATIONS FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; double keyed for improved reliability

More information

Standard SO according to DIN

Standard SO according to DIN Standard SO according to DIN 24.255 DESIGN FEATURES Design Features Horizontal centrifugal, single Stage pump. Spiral volute casing. Overhung on shaft impeller. Grease or oil lubricated antifriction bearing.

More information

EFQT/EFQU. EBARA Self Priming Trash Pump Selection Chart - EFQT. Project: Model: Chk d: Date: Model EFQT Selection chart

EFQT/EFQU. EBARA Self Priming Trash Pump Selection Chart - EFQT. Project: Model: Chk d: Date: Model EFQT Selection chart Selection Chart - EFQT Project: Model: Chk d: Date: Model EFQT Selection chart TDH m ft 42 140 36 120 30 100 24 80 18 60 EFQT2 EFQT3 EFQT4 EFQT6 EFQT8 EFQT10 12 40 6 20 0 0 0 500 1000 1500 2000 2500 3000

More information

The Universal Sewer Air Release Valve is designed to permit

The Universal Sewer Air Release Valve is designed to permit Universal Sewer Valves Universal Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features

More information

TYPE 5611/5611Q ELASTOMER BELLOWS CARTRIDGE SEAL

TYPE 5611/5611Q ELASTOMER BELLOWS CARTRIDGE SEAL 1 Foreword These instructions are provided to familiarize the user with the seal and its designated use. The instructions must be read and applied whenever work is done on the seal, and must be kept available

More information

Technical Specifications 11/2014. GE Oil & Gas. Series Texsteam* Electric Driven Injection Pump. GE Data Classification : Public

Technical Specifications 11/2014. GE Oil & Gas. Series Texsteam* Electric Driven Injection Pump. GE Data Classification : Public GE Oil & Gas Technical Specifications 11/2014 Series 2500 Texsteam* Electric n Injection Pump GE Data Classification : Public Contents Product Features...1 Options:...1 Model Designation...1 Gear Reducer

More information

http://www.kosmek.co.jp FOR PRESS MACHINES Company Profile K OS ME K LTD. H ea d O f f i ce Company Name KOS ME K L T D. Established Ma y 1 9 8 6 Capital 99,000,000 Sales 6 0 b i l l i o

More information

Application & Reference Data Typical Specifications. Section 914 Vertical Turbine Fire Pump

Application & Reference Data Typical Specifications. Section 914 Vertical Turbine Fire Pump Section 914 Page 101 Supersedes Section 913 Page 101 Dated November 1, 199p Application & Reference Data Typical Specifications Section 914 Section 914 Page 102 Supersedes Section 913 Page 102 Dated November

More information

Truck Pumps Water XS439 XS869

Truck Pumps Water XS439 XS869 Truck Pumps Water XS439 XS869 Water Truck 9" BOOK: WTP-005 DATE: Jan. 1, 2012 Features: Volute: Heavy cast iron construction. Back pullout design. Can be rotated for ease of installation. Impeller: Double

More information

TYPE 5615/5615Q SINGLE METAL BELLOWS CARTRIDGE SEAL

TYPE 5615/5615Q SINGLE METAL BELLOWS CARTRIDGE SEAL 1 Foreword These instructions are provided to familiarize the user with the seal and its designated use. The instructions must be read and applied whenever work is done on the seal, and must be kept available

More information

Fire Pump Capabilities N N O V A T I O N E F F I C I E N C Y Q U A L I T Y

Fire Pump Capabilities N N O V A T I O N E F F I C I E N C Y Q U A L I T Y Fire Pump Capabilities N N O V A T I O N E F F I C I E N C Y Q U A L I T Y PAGE INTENTIONALLY LEFT IN BLANK Ruhrpumpen is an innovative and efficient centrifugal pump technology company and offers operators

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y N N O V A T I O N E F F I C I E N C Y Q U A L I T Y PS For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is an innovative

More information

Single-acting pneumatic cylinder type ECS

Single-acting pneumatic cylinder type ECS Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder

More information

TYPE 5610V/5610VQ SINGLE O-RING CARTRIDGE SEAL

TYPE 5610V/5610VQ SINGLE O-RING CARTRIDGE SEAL 1 Foreword These instructions are provided to familiarize the user with the seal and its designated use. The instructions must be read and applied whenever work is done on the seal, and must be kept available

More information

Limitorque Actuation Systems PT Series Worm Gear Operator

Limitorque Actuation Systems PT Series Worm Gear Operator Limitorque Actuation Systems PT Series Worm Gear Optimized for Electric Valve Actuators Experience In Motion PT Series Worm Gear s Worm gear drives specifically designed for motorized operation Limitorque

More information

CSO/CP Series. Alloys to suit all applications. Proud Manufacturers of SAMCO Pumps

CSO/CP Series. Alloys to suit all applications. Proud Manufacturers of SAMCO Pumps CSO/CP Series SAM Engineering (Pty) Ltd. 2 Duncan Road, Lilianton, Boksburg, South Africa Tel: +27 (0) 23 Fax: +27 (0) 2393 Email: pumps@sameng.co.za www.sameng.co.za Alloys to suit all applications Proud

More information

MTC. Mold Temperature Control. Consilience Technology

MTC. Mold Temperature Control. Consilience Technology We supply Take-out Robot, Factory Automation, Auxiliary Equipment, Auto Feeding system as an Integrated Engineering Solution provider. Consilience Technology MTC Mold Temperature Control 02 03 Company

More information

3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)

3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C) 3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency

More information

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400

More information

Series: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number)

Series: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number) 4ET - 725 RPM - 60Hz. ET - 450 RPM - 60Hz. (See Indivdual curves for symbol number) ET - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) USA: (97) 77-947 Canada: (905) 457-622 International:

More information

Manufacturing Program: LAND APPLICATIONS. Mixed Flow Pump. type TR

Manufacturing Program: LAND APPLICATIONS. Mixed Flow Pump. type TR Mixed Flow Pump type TR Constructional Features Vertical single and multi-stage mixed flow pumps for wet pit installation. Standardised asembly groups: suction, casing, column pipe, discharge bend, rotor

More information

Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron

Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CRP. Chemical Centrifugal Pump Acc. to DIN EN ISO 2858 & DIN EN ISO 5199

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CRP. Chemical Centrifugal Pump Acc. to DIN EN ISO 2858 & DIN EN ISO 5199 N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CRP Chemical Centrifugal Pump Acc. to DIN EN ISO 288 & DIN EN ISO 1 For more than years the name Ruhrpumpen has been synonymous worldwide with innovation

More information

Installation Instructions

Installation Instructions Installation Instructions Single Inside Pusher Type Seals BPO, BPT, BRO, BRT, PTO, PT, RO, RO-TT, and others 1 Equipment Check 1.1 Follow plant safety regulations prior to equipment disassembly: 1.1.1

More information

Goulds 3410 Small Capacity Double Suction Pumps

Goulds 3410 Small Capacity Double Suction Pumps Goulds Pumps Goulds 3410 Small Capacity Double Suction Pumps Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3410 Double Suction Pumps Designed for a Wide Range

More information

300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS

300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES

More information

Easy Riser swing check valve Models E-1 & F-1

Easy Riser swing check valve Models E-1 & F-1 Page 1 of 7 1. DESCRIPTION The Viking Easy Riser Swing Check Valve is a general purpose rubber-faced approved for use in fire service systems. The valve is for use in wet system risers, preaction system

More information

Peerless Pump FULL PRODUCT LINE. Brochure B Sterling Fluid Systems (USA), Inc.

Peerless Pump FULL PRODUCT LINE. Brochure B Sterling Fluid Systems (USA), Inc. Peerless Pump FULL PRODUCT LINE Sterling Fluid Systems (USA), Inc. Brochure B-1270 PEERLESS pump Your total resource pump supplier. Any number of companies can sell you a pump. But very few have the expertise,

More information

Submersible Stainless Steel Semi-Vortex Pumps Pumps

Submersible Stainless Steel Semi-Vortex Pumps Pumps Technical Data Right Submersible Stainless Steel Semi-Vortex Pumps Pumps EBARA PUMPS AUSTRALIA PTY. LTD. DWVOX_Techdata_SS_ Right_Techdata_DS_ CONTENTS -SPECIFICATIONS Page Features & Applications 100

More information

ROBUST Series. High-Speed Precision Angular Contact Ball Bearings for Machine Tool Spindles

ROBUST Series. High-Speed Precision Angular Contact Ball Bearings for Machine Tool Spindles ROBUST Series High-Speed Precision Angular Contact Ball Bearings for Machine Tool Spindles Temperature tolerance and low heat generation Smooth running even during sudden rapid acceleration Higher speed

More information

DW - DW VOX SUBMERSIBLE SEWAGE PUMPS

DW - DW VOX SUBMERSIBLE SEWAGE PUMPS DW - DW VOX SUBMERSIBLE SEWAGE PUMPS DW - DW VOX EBARA presents the DW - DW VOX Submersible Pump. The ONLY submersible pump for light screened Sewage and dirty water. The pump is manufactured entirely

More information

1100 Series Multi-Stage Vertical Turbine Pumps

1100 Series Multi-Stage Vertical Turbine Pumps 1100 Series Multi-Stage Vertical Turbine Pumps Capacities to 40,000 GPM Heads to 1,500 Feet Temperatures to 200 F Water Lubricated Open Lineshaft Vertical Hollow Shaft Motor The vertical hollow shaft motor

More information

NC State University Design and Construction Guidelines Division 23 Hydronic Pumps

NC State University Design and Construction Guidelines Division 23 Hydronic Pumps 1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal

More information

KV / SKV Vertical Inline Pumps

KV / SKV Vertical Inline Pumps Water Circulation Pumps & Circulators KV / SKV Vertical Inline Pumps Taco KV Series Vertical Inline Pumps meet the latest standards for hydraulic performance and dimensional characteristics. Now available

More information

CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM

CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM DESCRIPTION Series S pumps are general purpose positive displacement gear pumps and are a good choice

More information

COMMERCIAL MULTIPORT VALVES

COMMERCIAL MULTIPORT VALVES COMMERCIAL MULTIPORT VALVES Owners Manual 65 mm Top mount 65 mm Side Mount 80 mm Top Mount 80 mm Side Mount 100 mm Side Mount! WARNING This equipment must be installed and serviced by a qualified technician.

More information

NSK Ball Screws. Compact FA Series. Compact ball screws offer quiet, high-speed operating performance. Two-week delivery is available on common sizes.

NSK Ball Screws. Compact FA Series. Compact ball screws offer quiet, high-speed operating performance. Two-week delivery is available on common sizes. NSK Ball Screws Compact ball screws offer quiet, high-speed operating performance. Two-week delivery is available on common sizes. Compact ball screws offer quiet, high-speed performance. ball screws incorporate

More information

ISO 2858 Back Pullout End Suction Centrifugal Pumps

ISO 2858 Back Pullout End Suction Centrifugal Pumps ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed

More information

Grundfos Home Booster

Grundfos Home Booster GRUNDFOS DATA BOOKLET Grundfos Home Booster UPA 15-9, UPA 15-12, UPA 15-16, UPA 12 5/6 Hz Grundfos Home Booster Table of contents 1. Product description 3 Applications..................................................................................

More information

DELTA O-RING CARTRIDGE SEAL ASSEMBLY AND INSTALLATION INSTRUCTIONS INTRODUCTION:

DELTA O-RING CARTRIDGE SEAL ASSEMBLY AND INSTALLATION INSTRUCTIONS INTRODUCTION: DELTA O-RING CARTRIDGE SEAL ASSEMBLY AND INSTALLATION INSTRUCTIONS INTRODUCTION: These instructions are provided to familiarize the user with the seal and its use. The instructions must be read carefully

More information