SYSTEM DELTA BRZI SPOJ (za spajanje cijevi) SYSTEM DELTA FAST CONNECTION SYSTEM DELTA DIE SCHNELLE VERBINDUNG
|
|
- Sherilyn Pope
- 6 years ago
- Views:
Transcription
1 SYSTEM DELTA BRZI SPOJ (za spajanje cijevi) SYSTEM DELTA FAST CONNECTION SYSTEM DELTA DIE SCHNELLE VERBINDUNG System DELTA fazone s pokretljivim priključkom izrađene su od duktilnog lijevanog željeza (GGG 50) za tlačne PVC cijevi, cijevi od lijevanog željeza, čelične cijevi i azbestcementne cijevi. Kod PE cijevi koristi se unutarnji zaštitni tuljak. System DELTA fazone dozvoljavaju zmijoliko polaganje vodova sa zakretanjem osi do 8. Na zahtjev, system DELTA fazone isporučuju se sa specijalnim zaštitnim slojem, na primjer, iznutra i izvana elektrostatičko oslojavanje prahom ili epoksidni slojevi. Gumeni prsteni od EPDM-a sadržani su u isporukama. Stezni prsteni od nodularnog lijeva primjenjuju se za lijevano željezne, čelične, PVC/PHD, odn. azbestcementne cijevi. System DELTA fittings with movable joint of ductile cast iron (GGG 50) are for PVC pressure pipes, cast iron, steel and asbestos cement pipes. For PE pipes the fittings receive an inside tube protector. System DELTA fittings allow snaked pipe laying with declination of axis up to 8. On request, system DELTA fittings are delivered with special coatings. For instance, inside and outside electrostatic powered coating or epoxy coatings. Rubber gaskets made of EPDM are included in our delivery. Pressed gaskets of ductile cast iron are applicable for cast iron, steel, PVC/PHD or asbestos cement pipes. System DELTA Formstücke mit beweiglichem Anschluss sind aus duktilem Gusseisen (GGG 50) für PVC-Druckrohre, Guss-, Stahl- und Asbestzementrohre lieferbar. Für PE-Rohre in Verbindung mit Innenstützhülsen. System DELTA Formstücke ermöglichen bis zu 8 abgewinkelte Rohrverlegungen. System DELTA Formstücke werden auf Wunsch mit Sonderbeschichtungen geliefert. Zum Beispiel, mit innen und aussen EKB-elektrostatischer Pulverbeschichtung, oder Epoxy- Beschichtungen. Die Gummiringe aus EPDM sind von uns mitgelieferten. Die Pressringe aus duktilem Gusseisen sind für Guss-, Stahl-, oder PVC/PHD-rohre bzw. Asbestzementrohre einsetzbar. 03/2003-rev_1 1.19
2 BRZI SPOJ E BS System DELTA FAST CONNECTION E BS System DELTA DIE SCHNELLE VERBINDUNG E BS System DELTA 740 E BS System DELTA PN 10/16 GGG DN d1 d2 d3 A z1 z2 n vijci Schrauben screws M M16x M16x M16x M16x M16x M16x M16x M16x M20x A M20x B M20x A M20x B M20x120 Materijal Kučište: nodularni lijev GGG Pritezna prirubnica: nodularni lijev GGG Brtva: EPDM Vijci: A2 DIN 933 Matice: Č gal Zn DIN 934 Zaštita: EWS prema GSK normativima RAL-GZ-662 Material Body: ductile cast iron GGG Shaping ring: ductile cast iron GGG Gasket: EPDM Screws: A2 DIN 933 Nuts: St gal Zn DIN 934 Coating: EWS according GSKdirectives RAL-GZ-662 Material Körper: Duktiles Gußeisen GGG Pressring: Duktiles Gußeisen GGG Dichtung: EPDM Schrauben: A2 DIN 933 Muttern: St gal Zn DIN 934 Beschichtung: EWS nach GSK- Richtlinien RAL-GZ /2003-rev_1 1.20
3 BRZI SPOJ U BS System DELTA FAST CONNECTION U BS System DELTA DIE SCHNELLE VERBINDUNG U BS System DELTA 742 U BS System DELTA PN 10/16 GGG DN d1 d2 A B vijci Schrauben screws ,89 4 M16x ,89 4 M16x ,89 4 M16x M16x ,44 4 M16x ,44 4 M16x ,44 4 M16x ,44 6 M16x ,44 6 M20x A ,44 6 M20x B ,44 6 M20x A ,44 6 M20x B ,44 6 M20x120 *Ostale dimenzije na upit *Andere Dimensionen auf Anfrage *Other dimension on request n M Materijal Kučište: nodularni lijev GGG Pritezna prirubnica: nodularni lijev GGG Brtva: EPDM Vijci: A2 DIN 933 Matice: Č gal Zn DIN 934 Zaštita: EWS prema GSK normativima RAL-GZ-662 Material Body: ductile cast iron GGG Shaping ring: ductile cast iron GGG Gasket: EPDM Screws: A2 DIN 933 Nuts: St gal Zn DIN 934 Coating: EWS according GSKdirectives RAL-GZ-662 Material Körper: Duktiles Gußeisen GGG Pressring: Duktiles Gußeisen GGG Dichtung: EPDM Schrauben: A2 DIN 933 Muttern: St gal Zn DIN 934 Beschichtung: EWS nach GSK- Richtlinien RAL-GZ /2003-rev_1 1.21
4 FFRE REDUCIRANI KOMAD SA PRIRUBNICAMA - EKSCENTRIČAN FFRE DOULKE FLANGED FLAT TAPER FFRE FLANSCH ÜBERGANGS STÜCKE - EKSCENTRISCH 764 *FFRE GGG (St 37-2) Masa / Weight / Gewicht (kg ) Nominal size L Nennweite mm PN10 PN16 PN25 PN40 DN DN ,6 16, ,5 16, ,6 17, ,6 18, ,5 27, , ,5 27,5 26, ,5 34, , , , , ,5 38,5 51, , , , , ,5 93, , , * Na poseban upit * On special request * Auf besondere Anfrage 03/2003-rev_1 1.23
5 MMAT - ODCJEPNI KOMAD SA DVOSTRUKIM KOLČAKOM I EKSCENTRIČNOM PRIRUBNICOM MMAT - FLANGE ON DOUBLE SOCKET LEVEL INVERT TEE MMAT - DOPPELMUFFEN STÜCKE MIT EKSCENTRISCH FLANSCHE 745 MMAT * GGG Masa u kg Nominal size L H Weight in kg Nennweite Gewicht in kg DN1 DN2 PN10 PN ,5 27, ,0 38, ,0 41, * Na poseban upit * On special request * Auf besondere Anfrage ,0 50, ,0 51, ,0 58, ,0 68, ,0 75, ,0 80, ,0 108, ,0 130, ,0 178, ,0 253,0 03/2003-rev_1 1.24
6 T - KOMAD SA PRIRUBNICAMA EKSCENTIRČAN Te T - FLANGED INVERT TEE Te T - FLANSCHSTÜCKE EKSCENTRISCH Te 746 Te* GGG Masa u kg Nominal size L H Weight in kg Nennweite Gewicht in kg DN1 DN2 PN10 PN ,5 93, * Na poseban upit * On special request * Auf besondere Anfrage 03/2003-rev_1 1.25
7 PRIRUBNIČKI KOMADI SA ZIDNOM PRIRUBNICOM FITTING PIECE WITH WALL FLANGA FLANSCHSTÜCKE MIT MAUERNFLANSCHE 747 FFM GGG MASA / WEIGHT / GEWICHT (kg) Nominal size L L 1 e De D a b c TYP A TYP B Nennweit mm mm mm mm mm mm mm mm PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 DN , , , , , , , , , , , , , , , TYP A TYP - B 03/2003-rev_1 1.26
8 DVOKOMORNA SPECIJALNA PRIRUBNICA ZA SPAJANJE GG/GGG CIJEVI PIPE CONNECTION DOUBLECHAMBER SPECIAL FLANGE ZWEIKAMMER SPEZIALFLANSCH FÜR VERBINDEN GG/GGG ROHRLEITUNGEN 780 POZ. TEIL PART MATERIJAL PO DIN-u WERKSTOFF NACH DIN MATERIAL ACC TO DIN 1. GGG 2. EPDM 3. GGG GGG Nominal size Nennweite DN d 1 D k Vijci Bolts Schrauben n PN 10 PN 16 b L PN 10 PN M M M M M M M M , M 20 M 03/2003-rev_1 1.27
9 SH SKRETNICA ZA HIDRANT SH ADJUSTMENT BEND SH ANPASSUNGSFÄHIG BOGEN Nominal size Nennweite DN L A kg Typ SH ,5 SH /2003-rev_1 1.28
)D]RQVNLNRPDGL]DãWLüHQLVXVDHSRNVLERMRPLOLHSRNVLSUDãNRPSODVWLILFLUDQMH Bušenje
Primjena )D]RQVNLNRPDGLXSRWUHEOMDYDMXVH]DVSDMDQMHSODVWLþQLK39&',1XFLMHYRYRGQLPVLVWHPLPD]DYRGXLQHXWUDOQH medije Radni tlak 10bara Dozvoljeni radni tlak 16 bara maks. Radna temperatrua 70ºC maks. MATERIJAL
More informationFlange holes are bored according to DIN 28605: up to DN 150 for PN 16 (PN 16 on special request).
Primjena Fazonski komadi upotrebljavaju se za spajanje plastičnih PVC DIN 8061/8062 u cijevovodnim sistemima za vodu i neutralne medije Radni tlak 10bara Dozvoljeni radni tlak 16 bara maks. Radna temperatrua
More informationSYSTEM mobi PRIMJENA VERWENDUNG APPLICATION
SYSTEM mobi PRIMJENA - montažni sistem za spajanje svih PE i PVC cijevi, - jednostavna montaža je zamjena za spajanje pomoću zavarivanja, - kod teških uvjeta ugradnje u dolinama i brdima, kao i pod vodom
More informationFlangeless and Restraint Coupling System for Valves and Fittings
BAIO System Flangeless and Restraint Coupling System for Valves and Fittings For decades, flangeless components have been used for pipes and pipe fittings of buried supply lines because this coupling system
More informationFITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE
4 FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE Typ/Type CS-VE/CS-EP PN 10/10 AUS GLASFASERVERSTÄRKTEM VINYLESTERHARZ (VE) ODER
More informationFormstücke, Flanschendruckrohre. und Armaturen. Index: (click with mouse) Fittings, Flanged pipes and Valves made of Ductile Cast Iron ( GGG )
FITTINGS AND VALVES Index: (click with mouse) Formstücke, Düker in general Flanschendruckrohre Preamble und Armaturen aus The complete duktilem product Gusseisen range ( GGG ) > Index Location plan Flag
More informationEADIPS /FGR STANDARD
EADIPS /FGR STANDARD 201306 Ductile iron fittings Socket spigotbends Dimensions EADIPS /FGR 70 Formstücke aus duktilem Gusseisen MK und MQStücke Maße Replaces 201202 edition Amendments To Normative references
More informationTECHNISCHE DATEN TYP HDT TECHNICAL DATA. Double-acting hydraulic telescopic cylinder,
TECHNISCHE DATEN TYP HDT Hydraulisch doppeltwirkender Teleskopzylinder TECHNICAL DATA TYP HDT Double-acting hydraulic telescopic cylinder Hydraulisch doppeltwirkender Teleskopzylinder, bis zu 4 Stufen,
More information2019 Price List. Thrust-Resistant Joints Pressure Pipe Fittings for Plastic Pipelines Pipe Fittings for Sewage Pipelines Socket Connections
FITTINGS AND VALVES 2019 Price List Gate Valves Service Connection Valves Hydrants Butterfly Valves Back Flow Preventers, Ventilation Valves Control Valves Novo Plug-in System Accessories Pressure Pipe
More informationDatenblatt Flüssigkeitsringpumpe Data sheet liquidring pump
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Serie Series L-BV5 L_300 Flüssigkeitsringpumpen Liquid ring pumps 3 AC; 50/60 Hz 3 AC; 50/60 Hz Vakuumbetrieb Vacuum operation Typen Types 2BV5
More informationIndex. Vorschweißflansche ab Seite 119 Welding neck flanges from Page 119. Blindflansche ab Seite 123 Blind flanges from Page 123
Flansche Flanges Index Vorschweißflansche ab Seite 119 Welding neck flanges from Page 119 Blindflansche ab Seite 123 Blind flanges from Page 123 Lose Flansche ab Seite 125 Loose flanges from Page 125 Glatte
More informationÜbersicht Führungsprofile aus ISO-LEN Overview Guide Profiles made of ISO-LEN
F Ü H R U N G S P R O F I L E F Ü R K E T T E N G U I D E - P R O F I L E S F O R C H A I N S Übersicht Führungsprofile aus ISO-LEN Overview Guide Profiles made of ISO-LEN Typ TI Typ TI-Duplex Typ CIF
More informationFittings, flanged pipes and valves made of ductile cast iron (GGG)
FITTINGS AND VALVES Index: (click with mouse) Fittings, flanged pipes and valves made of ductile cast iron (GGG) Düker in general Preamble The complete product range > Index Location plan Flag / Addresses
More informationPAV1 ISO A ACCIAIO STEEL STAHL ACIER. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques. Norme: ISO A
ISO A ACCIAIO STEEL STAHL ACIER 74 Caratteristiche tecniche I Nominal size Max working pressure Rated flow Max flow rate Min burst pressure DNP BG ISO mm Mpa l/min l/min MPa MPa MPa cc 06 1 6.3 5 35 12
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationDIN Aseptik Klemmverbindung DIN Aseptic Clamp Union
Datenblatt Datasheet DIN11864-3 Aseptik Klemmverbindung DIN11864 3 Aseptic Clamp Union liquitec AG Industrie Neuhof 54 CH-3422 Kirchberg T +41 55 450 83 00 F +41 55 450 83 01 info@liquitec.ch www.liquitec.ch
More informationMaße Einteilige Absperrklappe Serie KG4 Dimensions One-piece butterfly valve series KG4 DN 50 - DN 300
Maße Einteilige Absperrklappe Serie KG4 Dimensions One-piece butterfly valve series KG4 DN 50 - DN 300 Baulänge: EN 558-1 Reihe 20 (DIN 3202-K1) Face to face dimension: EN 558-1 line 20 (DIN 3202-K1) Montageplatte
More informationSwing Check Valves - Series 41
Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.
More informationUNION-TITE DUCTILE IRON C153 COMPACT FITTINGS
Sizes 4"-12" UL Listed for Fire Main Equipment SAMPLE SPECIFICATIONS (Current ANSI/AWWA revisions apply) 4" through 24" Push-On joint ductile iron fittings shall be produced in accordance with all applicable
More informationGeorg Fischer Waga N.V. A BIG welcome MULTI/JOINT 3000 Plus DN450 - DN600
Georg Fischer Waga N.V. A BIG welcome MULTI/JOINT 3000 Plus 40 - The original just got BIGGER and BETTER! The well-known and trusted wide range MULTI/JOINT 3000 Plus system has now been extended with the
More informationPre assembled for quick installation. One fitting is able to connect multiple pipes materials. Approvals/Standards BS EN ISO 9001
Technical Guide WM5.1 Viking Johnson Couplers and Flange Adaptors Viking Johnson Maxi Range of universal pipe couplings represents the very latest in mechanical pipe coupling technology. Scan for more
More informationSKU: DR4306. Fixed Orifice Double Regulating Valve
SKU: DR4306 VOLT Fixed Orifice Double Regulating Valve 1/2" - 2" Brass Double Regulating Valve with Test Points 1/2" - 2" Messing Doppelregelventilmit Testpunkte 1/2" - 2" Latón Doble Válvula reguladora
More informationOperating manual Keula gate valves DN PN10/16
Operating manual Keula gate valves DN40-400 PN10/16 Page - 1 Manufacturer: Keulahütte GmbH Geschwister-Scholl-Str. 15 02957 Krauschwitz GERMANY Manufacture and sale of the slide valves: Slide valves according
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More information(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
More informationType / Material code Body* Disc Stem Lining**
Design butterfly valve is designed with lug or flange connection. Lug connection in dimensions DN 32-300, flange connecton DN 300-1000. is available in pressure ratings PN 10 /16 according to dimension.
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More informationHAWLE-specification water
water GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN HAWLE - Epoxy Powder-Coating High quality corrosion
More informationERHARD is a company of. Datasheet ERHARD ABS Premium service valve
ERHARD is a company of Datasheet ERHARD ABS Premium service valve ERHARD ABS Premium service valve The innovative tapping systems With the new it has been possible to reduce the number of required models
More informationATLANTIC PLASTICS is a company of. UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors
ATLANTIC PLASTICS is a company of UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors The UPE MultiDiameter range of wide tolerance couplings and flange adaptors can be used for almost any
More information1 body / (DN15-DN20) J / (DN25-DN50) J / (DN65-DN80) K
Type: Description: standard safety valve angular shape metal sealing spring-loaded enlarged outlet flanges acc. to EN1092-1 or ANSI: inlet: PN16-PN63 outlet: PN16-PN40 cone liftable with gas-tight cap
More informationStyle Flange Adapter
Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved
More informationMULTI/JOINT. One size fits and grips all End-load resistant - Flexible DN50 - DN600
MULTI/JOINT One size fits and grips all End-load resistant - Flexible DN50 - DN600 1 MULTI/JOINT FITTINGS large tolerance fittings It means that pipes that can be fitted may have different diameters, with
More informationTHOMAS. Large Diameter Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Large Diameter Couplings Dedicated Connections For Rigid Large Diameter Pipework F1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED
More informationGeneral lnstructions BAIO System
General lnstructions BAIO System For decades mainly flangeless components have been used for pipes and pipe fittings of buried supply lines, as this coupling system affords some technical and economic
More informationROMACON COUPLINGS AND FLANGE ADAPTORS
ROMACON COUPLINGS AND FLANGE ADAPTORS Couplings DN mm DN inches Range Romafit Weight kg 50 2 59-73 3,8 65 2,5 72-85 4,3 80 3 88-103 4,5 100 4 108-128 5,6 125 5 132-146 6,8 125 5 139-153 6,9 150 6 159-182
More informationMaterials : Ductile iron body EN GJS
Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation Ductile
More informationVisual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Material Pipe Operating Operating Page
Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Pipe Operating Operating Page O.D. x s Pressure Temperature Plastic thread 10 25670 PVDF 63.0 x 3.6 2.5-10 thread max. 140 C 61 Plastic
More informationd z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
More informationMaxiFit. High Tolerance Mechanical Pipe Fittings. World leaders in pipe joint, repair & flow control products
World leaders in pipe joint, repair & flow control products The Viking Johnson range of MaxiFit universal pipe couplings represents the very latest in mechanical pipe coupling technology. MaxiFit products
More informationMaterials : Ductile iron body EN GJS
Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN16 up to DN300-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation
More informationStafsjö Valves AB. SE Stavsjö, Sweden. Tel: +46 (0) Fax: +46 (0) A Bröer Group company
Product: W W Stafsjö s knife gate valve W is a bi-directional valve with full bore. It is made to handle different liquids, especially in water, waste water and biogas plants. The W valve is designed of
More informationMaße / Dimensions 3-teiliger Kugelhahn Serie DG1 3-pce ball valve series DG1 DN 8 - DN 50 voller Durchgang / full bore
DN 8 - DN 50 voller Durchgang / full bore Antriebsanschluss nach DIN 3337 / ISO 5211 - siehe Datenblatt Antriebsanschluss Mounting plate acc. to DIN 3337 / ISO 5211 - see data sheet mounting plate DN NPS
More informationTECHNISCHE DATEN TYP HNZ Hydraulik Differentialzylinder mit Endlagendämpfung TECHNICAL DATA. Hydraulic differential cylinder with end position damping
TECHNISCHE DATEN TYP HNZ Hydraulik Differentialzylinder mit Endlagendämpfung TECHNICAL DATA TYP HNZ Hydraulic differential cylinder with end position damping Hydraulik Differentialzylinder mit einstellbarer
More informationPAO1-PAOC. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques
127 PAO1-PAOC Caratteristiche tecniche ISO A PASSAGGIO LIBERO/ACCIAIO FREE FLOW/STEEL FREIER DURCHLAUF/STAHL PASSAGE LIBRE/ACIER I PAO1 Nominal size Max working pressure Rated flow Max flow rate Min burst
More informationTHOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally
More informationOutdoor Bushings DIN kv / A Freiluft Durchführungen DIN kv / A
Outdoor Bushings DIN 0 kv / 0-0 A Freiluft Durchführungen DIN 0 kv / 0-0 A Qty. 0 Top porcelain A Bottom porcelain B Brass stem Brass washer E Brass washer G Ring gasket J Plain gasket (M) Flange gasket
More informationPush-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented
Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented PE-100 / PVC-U pull-out resistant long type Push-Fit Transition Coupling for PE-100 and PVC-U water pipes up to 16 bar d90
More informationThese PFA and PTFE lined products offer a reliable solution in hazardous applications
These PFA and PTFE lined products offer a reliable solution in hazardous applications Features Check valves Heavy duty body in ductile iron GGG4.3 (ASTM A-395). Heavy duty PFA or PTFE lining. Borosilicate
More informationDEUTSCHE NORM June 2002
DEUTSCHE NORM June 2002 Flanges and their joints Circular flanges for pipes, valves, fittings and accessories Part 1: Steel flanges, PN designated English version of DIN EN 1092-1 { EN 1092-1 ICS 23.040.60
More informationMaterials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications
More informationiberdur INHALTSVERZEICHNIS TABLE OF CONTENTS SOMMAIRE 2.1 EINLEITUNG INTRODUCTION INTRODUCTION 2 / 1
INHLTSRZEIHNIS TLE OF ONTENTS SOMMIRE 2.1 EINLEITUNG INTRODUTION INTRODUTION 2.2 MESSUNGEN DIMENSIONS DIMENSIONS OGEN ELOW OUDE T-STÜK TEE-FITTING TE REDUZIERTES-T-STÜK REDUED-TEE-FITTING TE REDUIT ROHRSTTEL
More informationGreater Cairo Foundries. Concentric Rubber Lined Butterfly Valves
Greater Cairo Foundries مسابك القاهرة الكبرى Concentric Rubber Lined Butterfly Valves GCF Double Flanged Butterfly Valve Series 7100 for Water Works Application GCF butterfly Valve Series 7100 is a ductile
More informationTechnical Manual. Register 10 CONTENTS - ASG
Page: 1 Contents Register 10 CONTENTS - ASG Page Technical Data ASG-DIN...2 Technical Data ASG-ANSI...3 Material Specification ASG...4 Dimensions ASG-DIN...5 Dimensions ASG-ANSI...6 Spare Parts ASG...7
More informationType 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
More informationTYTON JOINT FITTINGS DUCTILE IRON PIPE SYSTEMS
80-750. MANUFACTURED TO AS/NZS 2280 Ductile Iron fittings for ig strengt and impact resistance Suitale for in ground or aove ground applications All fittings are supplied wit a termally onded polymeric
More informationBS up.v.c PRESSURE PIPE FITTINGS
BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationMaterials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation
More informationCV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
More informationWide-Range Coupling Solutions
Wide-Range Coupling Solutions HYMAX. CONNECTING THE FUTURE. A revolutionary product that set a new industry standard, the HYMAX* product line has been field-proven in millions of installations world-wide.
More informationMaterials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications
More informationAVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)
Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /
More informationDuctile Iron. Fittings and Accessories for pressure pipelines. 1 st issue
Ductile Iron Fittings and Accessories for pressure pipelines 1 st issue INTRODUCTION Tawakol Metal Industries is Egypt's main manufacturer of Grey and Ductile Cast Iron products since 1975. TMI's reputation
More informationDuctile cast iron pipe systems for sewage
Ductile cast iron pipe systems for sewage Resistant to root penetration Long-lived Able to carry high static loads Extensive range of fittings Can be used for gravity and pressure pipelines Ductile iron
More informationHawle Haku PE Pipe Saddle
Hawle Haku PE Pipe Saddle Scan for more information Technical Guide W9.1 Specifically designed as a PE mechanical connection solution. Suitable for PE pipes of all pressure ratings up to PN 16. DN40-360.
More informationType 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
More informationDual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
More informationERHARD is a company of. Datasheet ERHARD ERK tilting-disc check valve
ERHARD is a company of Datasheet ERHARD ERK tilting-disc check valve The universal check valve with double excentric valve disc A key component of the is the valve disc which has a freely oscillating,
More informationFlush-mounted pressure and level transmitters - TPF series 100/101 -
FEATURES PRECISE MEASUREMENTS WITH ± 0.15% FS WIDE RANGE OF PROCESS CONNECTIONS FOR HYGIENIC APPLICATIONS TURN-DOWN 10 VACUUM-PROOF PIEZORESISTIVE MEASURING CELL WITH STAINLESS STEEL MEMBRANE MEASURING
More informationRANGER FLANGE ADAPTORS
RANGER ADAPTORS RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. Because of the
More informationTHOMAS. Ultra Saddles & Tees. Tap In Products PIPE PRODUCTS. Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps
THOMAS PIPE PRODUCTS Tap In Products Ultra Saddles & Tees Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps E1 Ultra Saddles & Tees Overview For a Permanent and Simple Tap In Solution for
More informationKTS Technical catalogue. Catalogo tecnico Technischer Katalog
Technical catalogue Catalogo tecnico Technischer Katalog rev.0-15/01/2015 Selector vacuum - pressure Selettore Vuoto - Pressione Wähler von Vakuum/Druck Kit Aluminum Final Air Filter Kit filtro aria alluminio
More informationProduct catalogue. Mechanical accessories for pumps and mixers
Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15
More informationGrooved Butterfly Valves
Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600
More informationREPAMAX. Versatile Stainless Steel Coupling. Versatile Stainless Steel. By Krausz Wide-Range Couplings. Joins as a coupling. Repairs as a clamp.
JOIN REPAIR RESTRAIN REPAMAX Versatile Stainless Steel By Krausz Wide-Range Couplings Joins as a coupling. Repairs as a clamp. Versatile Stainless Steel Coupling REPAMAX Product Information Versatile Stainless
More informationData sheet Knife gate valve WB PN10 DN
Page: 1(7) Introduction The Stafsjö WB knife gate valve is a bi-directional seated valve with full bore. Its main applications are different liquids at water, waste water and biogas plants. The WB is designed
More informationThermometer wih Remote Transmission Ø 100 mm Thermometer mit Fernübertragung Ø 100 mm
Thermometer wih Remote Transmission Ø 100 mm Thermometer mit Fernübertragung Ø 100 mm No. 100601 Weight: 1180 gr Front Flange Bottom Outlet No. 100602 Weight: 1 gr CONSTRCTIVE SPECIFICATIONS TECHNICA SPECIFICATIONS
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationUNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings
UNIJOINT is a company of UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT For Challenging Pipe Connections UNIJOINT, established in 1992 in the Netherlands, is a company with a vast experience in
More informationTechnical Manual. Register 8 CONTENTS - ARV2
Page: 1 Register 8 CONTENTS - ARV2 Contents Page Technical Data ARV2-DIN... 2 Technical Data ARV2-ANSI... 3 Material Specification ARV2... 4 Dimensions ARV2-DIN... 5 Dimensions ARV2-ANSI... 6 Spare Parts
More informationPressure reduction controller AFD / VFG 2, VFG 21, VFGS 2
Data sheet Pressure reduction controller AFD / VFG 2, VFG 21, VFGS 2 Description The controller is a self-acting pressure reducer primarily for use in district heating systems. The control closes on rising
More informationTilting-disc Check Valves Short Body
Tilting-disc Check Valves Short Body Tilting-disc Check Valves, Short Body to DIN 3202 Series F4 for liquids and gases, PN 10 - PN 40, DN 150 - DN 2000 Short Body Tilting-disc Check Valves More than 40
More informationAPPENDIX: TECHNICAL INFORMATION
Materials Test and Operation Specifications Quality Assurance MATERIALS: Cast Iron Grey iron GD-250 GG-25 to DIN 1691-1964 Grade 220/250 minimum to BS 1452-1990 Class 35B/40B to ASTM-A48-1974 250-200 -
More informationIPP Deltaflex Flansche IPP Deltaflex Flanges IPP Deltaflex Bridas I N T E R N A T I O N A L
IPP Deltaflex Flansche IPP Deltaflex Flanges IPP Deltaflex Bridas I N T E R N A T I O N A L Product overview IPP DELTAFLEX Flange Engineering Improved Piping Products, Inc. (IPP) has patented the second
More informationPressure reduction controller AFD / VFG 2, VFG 21, VFGS 2
Data sheet Pressure reduction controller AFD / VFG 2, VFG 21, VFGS 2 Description The controller is a self-acting pressure reducer primarily for use in district heating systems. The control closes on rising
More informationKTS Technical catalogue Catalogo tecnico Technischer Katalog
KTS 840-960 - 1080 Technical catalogue Catalogo tecnico Technischer Katalog rev. 03 del 12/05/2017 Selector vacuum - pressure Selettore Vuoto - Pressione Wähler von Vakuum/Druck Kit Aluminum Final Air
More informationJUST PIPING, JUST FITTING. A Comprehensive Integrated Solution For Piping Systems
JUST PIPING, JUST FITTING A Comprehensive Integrated Solution For Piping Systems SF 01 DUCTILE IRON PIPE FITTINGS FD1011 FD1021 FD1022 FD1031 FD1102 FD1103 FD1111 FD1121 Double Flanged Piece Flanged spigot
More informationMULTI/JOINT 3000 Plus. The connection for all pipe diameters Restraint Non restraint DN50 DN400. Georg Fischer Waga N.V.
MULTI/JOINT 3000 Plus The connection for all pipe diameters Restraint Non restraint DN50 DN400 Georg Fischer Waga N.V. DAS ORIGINAL EL ORIGINAL HET ORIGINEEL THE ORIGINAL MULTI/JOINT 3000 Plus >> Wide
More informationPressure Pipes & Fittings
Pressure Pipes & Fittings Description: UPVC and CPVC pipes for hot and cold water supply under pressure. Range: Metric series fromø16 up toø315 mm, Imperial series fromø1/2" up toø1". Pressure Rating:
More informationRef ALL POSITIONS CAST IRON CHECK VALVE PN16. Model/Ref:
Model/Ref: 363-366 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. ISO PN10/16-10 C + 130 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications
More informationWafer Check Valve Type 012 PVC-U
novel valve design with conical sealing surface for highest requirements and long service life body disc reinforced EPDM / FPM gaskets DN40 / d50 / 1½'' DN200 / d225 / 8'' operating pressure max. 10 bar
More informationTechnical details. Product features
VAG Hydrants VAG NOVA 284 Standpost Hydrant Maintenance-free stem seal Nominal diameter DN 80 / DN 100 Installation depth DN 80: 1.00 m / 1.25 m / 1.50 m DN 100: 1.25 m / 1.20 m Standard model: Upper and
More informationGRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.
GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part
More informationVAG Butterfly Valves
VAG Butterfly Valves VAG EKN Butterfly Valve H-Series New for the highest requirements Runners Pressure compensation channels O-ring seal Hydrodynamic disk Automatic sealing system Retaining ring Tapered-pin
More informationConcentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
More informationCentres-Live Chucks Type
Centres-Live Chucks Type 300-422 Face Drivers Type 300-303 with mechanical compensation 2 4 5 6 7 3 8 9 1 Very large bearing surface. Housing moves with centre to compensate for diefferent sizes of component
More information3 way ball valve S4 hand operated
General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN
More information7.1 Valves in spheroidal graphite cast iron
7/1 7 Valves 7.1 Valves in spheroidal graphite cast iron 7.2 Corrosion protection of valves in spheroidal graphite cast iron 7.3 Principles of hydraulics and the design of valves 7.4 Isolation valves 7.5
More information