L I S T A _ Workstations

Transcription

1 LISTA_Workstations

2 OVERVIEW Drawer systems NC storage and transport systems Workstations > Workstation systems > Workbenches > Modular workbenches > Stands and assembly trolleys > Chairs and stools Clothes lockers and material cabinets Shelf systems Dynamic storage technology Office systems ESD Electronic locking systems and access control systems Partition material /2007; LISTA 2007

3 Table of content Lista table system Introduction 4 Table subelements basic units 7 Add-on table subelements 9 Table subelements, component parts 10 Table tops 12 Drawer cabinets 18x27E 13 Superstructure Space Introduction 16 Superstructure / division system 19 Organisational elements 21 Lighting 25 Energy supply 26 Assembly trolleys 29 Superstructure Uno Introduction 32 Table structure 34 Organisational elements 35 Lighting 39 Power conduits 41 Workstation accessories Workstation superstructures 42 Storage containers 46 01/2007; LISTA

4 LISTA TABLE SYSTEM THE FUTURE SYSTEM WITH THE RATIONAL CONCEPT New forms of organization and changed production processes and technologies call for new workplace concepts. Flexibility is the universal requirement. Existing concepts may be adequate for partial solutions. With its new approach, however, Lista offers an all-embracing solution, comprising the table system, the superstructure system, the addon system and the space dividing system, which tables can also be connected to. Whether asingle table, several workplaces, or a team cell is involved, the interlinking of electrics, electronics, compressedair supply and data make the Lista Space workplace system a concept with a guaranteed future. Lista,makingworkspace work. THE STANDARD COLOURS For technical reasons, the printed colours shown here may differ from the original shades. capri blue RAL 5019 light blue RAL 5012 reseda green RAL 6011 ruby red RAL 3003 pure white RAL 9010 lightgrey RAL 7035 metallic grey NCS S 6502-B black NCS S 9000-N /2007; LISTA 2007

5 OVERVIEW A workplace system that combines four systems: Table system Theworkplace system centresround thetable system, distinguishedby itssimplicity and elegance. The tables are adjustable in height. Beside or below them, the drawer cabinets accoodate small parts. Superstructure Uno Thesuperstructuresystem supports theshelves, rear panels,adapters formonitors and other brackets, container strips, supporting arms, light fittings and supply conduits. Superstructure Space Thespace division system organises individual workplaces into ateam space.wall element screens can be of different materials and fitted with cabinets,shelves and other aids to organisation. Add-on system Future workplace requirements will involvegreatermobility.quality controlwillbe decentralised to thepoints of production. Increased processorientation will require new forms of organisation. Hard laminated top High-density chipboard core, finished in 0.8 thick laminate, highly resistant to abrasion andimpacts. Surface and edges lightgrey NCS S1500-N. Multiplex top Steam-treated beech veneer, waterproof glued multi-layer (DIN ), bevelled edges, surface planed and oiled. Top resistant to spray water and dirt and largely resistant to oiland grease. adjustment with catch Simple height adjustment without tools, using acatch assembly (700, 750, 800, 850, 900, 960, 1020, excluding table top). adjustment with hand crank Convenient, continuous height adjustment using aremovable hand crank ( ,excluding table top). 01/2007; LISTA

6 LISTA TABLE SYSTEM DIMENSIONS Table system dimensions Top width Clear width A B Top Useful Front top Foot from Foot depth depth projection behind width C D E F G Top Useful Front top Foot from Foot depth depth projection behind width C D E F G Planning information 1. New design GE = Table support frame basic unit AE = Table support frame extension basic unit 2. Splitting an existing installation 3. Extending an existing installation GE = Table support frame basic unit AE = Table support frame extension basic unit /2007; LISTA 2007

7 lista Table system Table subelements basic units Fixed height Table feet with fixed height. The feet are fitted with levelling screws. A steel frame joins the feet and carries the table top (suitable for table top depths ). Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top Load capacity: max. 200kg with evenly distributed load. Important: For free-standing placement, the crossbeam for free-standing table subelements is required. Other heights on request. adjustable with catch Table height adjustable in height with catch, no tools required. The feet have levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths ). adjustments (without top): 700, 750, 800, 850, 900, 960, Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL Triangular support grey metallic NCS S 6502-B. without top Load capacity: max. 200kg with evenly distributed load. Important: For free-standing placement, the crossbeam for free-standing table subelements is required. adjustable with hand crank Variable adjustment of table subelement with hand crank. The feet are furnished with levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths ). The hand crank may be fitted left and right and is removable. Specification: steel construction with cast aluminium triangular supports, painted. Incl. crank gear, without hand crank. Colour: table subelements light grey RAL Triangular support grey metallic NCS S 6502-B. without top Load capacity: max. 200kg with evenly distributed load. Important: For free-standing placement, the crossbeam for free-standing table subelements is required. The hand crank must be ordered separately. 01/2007; LISTA

8 adjustable with electric motor Table subelement with motor-driven gradual mechanical height adjustment. The feet are furnished with levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths ). Three user-defined height settings may be directly selected using the memory function. Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top Load capacity: max. 150kg with evenly distributed load. Important: For free-standing placement, the crossbeam for free-standing table subelements is required. Corner unit fixed height Fixed height table legs and height-adjustable support foot. The feet have levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700 and 800). Specification: steel construction with cast aluminium triangular supports, painted. Colour: tablesubelementslightgreyral7035. Triangular support grey metallic NCS S 6502-B. without top Top depth / 800 Load capacity: max. 200kg with evenly distributed load. Other heights on request. Not in connection with Lista Uno. Corner unit height adjustable with catch Table legs height adjustable without the use of tools, height-adjustable support foot. The feet have levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700 and 800). adjustments (without top): 700, 750, 800, 850, 900, 960, Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top Top depth / 800 Load capacity: max. 200kg with evenly distributed load. Not in connection with Lista Uno /2007; LISTA 2007

9 add-on Table subelements Add-on elements are used to configure table systems (linking). Add-on elements attach to a basic element or another add-on element. They consist of a steel frame and object foot that links the two steel frames together. Not in connection with Lista Uno. Fixed height Object foot with fixed height. The foot has levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths ). Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top Load capacity: max. 200kg with evenly distributed load. Other heights on request. adjustable with catch Object foot with catch, height adjustable without the use of tools. The foot has levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths ). Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top Load capacity: max. 200kg with evenly distributed load. Corner unit fixed height Object foot with fixed height and height-adjustable support foot. The feet have levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700 and 800). Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top Top depth / 800 Load capacity: max. 200kg with evenly distributed load. Other heights on request. Corner unit height adjustable with catch Object foot height adjustable without the use of tools, height-adjustable support foot. The feet have levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700 and 800). adjustments (without top): 700, 750, 800, 850, 900, 960, Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top Top depth / 800 Load capacity: max. 200kg with evenly distributed load. 01/2007; LISTA

10 Table subelements component parts Crossbeam for free-standing table subelements Screwed to the feet, stabilises free-standing table subelements. Also accoodates the wall cable conduit horizontally, and the power conduit. A pair of spacers must be ordered if used with an underneath or suspended cabinet. No crossbeam is necessary when tables are joined to wall elements. Specification: steel sheet including adaption material. Colour: light grey RAL Table sub-element width Important: When fitting a horizontal wall cable conduit or energy conduit inside a crossbeam, choose a conduit one size smaller than the crossbeam. Pair of spacers Pair of spacers Crossbeam Screwed to the feet, stabilises free-standing table subelements. Colour: light grey RAL Table sub-element width Not in connection with Lista Uno. Important: When fitting a horizontal wall cable conduit or energy conduit inside a crossbeam, choose a conduit one size smaller than the crossbeam. Feet Pair of table feet (left and right side) for completing reconfigured table systems. Table feet either fixed height, or height adjustable with catch. Feet are fitted with levelling screws. Specification: steel construction with cast aluminium triangular supports, painted. Colour: light grey RAL Triangular support grey metallic NCS S 6502-B. For table height without top Pair of feet, fixed height Pair of feet, height adjustable with catch Object feet Object feet (single foot) for completing reconfigured table systems. Object feet either fixed height, or height adjustable with catch. Feet are fitted with levelling screws. Specification: steel construction with cast aluminium triangular supports, painted. Colour: light grey RAL Triangular support grey metallic NCS S 6502-B. For table height without top Object feet, fixed height Object feet, height adjustable with catch /2007; LISTA 2007

11 Suspended foot support Foot support suspended from table subelement (as DIN ) with non-slip foot rest adjustable for height and angle. adjustment in 15 steps. Specification: steel, painted. Colour: light grey RAL7035. adjustment Foot rest Covered with ribbed PVC mat. Can be used under all workstations. Specification: sheet steel. Colour: light grey RAL7035. Ribbed mat, black Removable hand crank For table top depth /2007; LISTA

12 Table Tops Hard laminate top Middle layer of compacted chipboard grade E1 (DIN ), sandwiched both sides with hard laminate and overlay (DIN / DIN ). Laminate covering, 0.8 thick, highly impact- and abrasion-resistant. All edges with plastic 2 thick. Colour: surface and edges light grey NCS S 1500-N. Top length Top thickness Top depth Hard laminate top for corner unit Top length Top thickness Top depth Table tops with a depth of 900 are not in connection with Lista Uno. Multiplex tops Steam-treated beech veneer, waterproof glued multilayer (DIN ), bevelled edges, surface planed and oiled. Top resistant to spray water and dirt and largely resistant to oil and grease. Top length Top thickness Top depth Multiplex tops for corner unit Top length Top thickness Top depth Table tops with a depth of 900 are not in connection with Lista Uno /2007; LISTA 2007

13 drawer cabinets 18x27e Suspended drawer cabinet Welded construction with central lock with cylinder, plus individual safety, incl. 2 keys. Specification: sheet steel, painted. Colour: according colour table. Clear height Type B Suspension adapter Type For table depth Carrying capacity kg HA HA Drawer cabinets free-standing and mobile Welded construction. Vertical supports are slotted at 25 increments to enable drawers of various front heights to be installed. Sheet steel top. Central locking system, drawer safety catch, with cylinder lock incl. 2 keys. Mobile drawer cabinet with two rubber braking and swivel castors 75 dia. and ergonomic handle. Specification: sheet steel, painted. Colour: grey metallic NCS S 6502-B. Type Clear height Picture S S S S 402 F (without castor supports) S 403 F (without castor supports) S 409 F (without castor supports) 1 Pair of castor supports Pair of castor supports with rubber castors Drawers Standard model Front height Useful height Side / back height Carrying capacity kg EA EA EA EA EA EA /2007; LISTA

14 With safety catch on right Front height Useful height Side / back height Carrying capacity kg EA EA EA EA EA EA Useful width of drawers 306 = 18 units of 17 Useful depth of drawers 459 = 27 units of 17 Carrying capacity with evenly distributed load EA = Normal extension: 85-90% extension possible The front heights of all the drawers together should not exceed usable cabinet height /2007; LISTA 2007

15 01/2007; LISTA

16 SUPERSTRUCTURE SPACE THE FUTURE SYSTEM WITH THE RATIONAL CONCEPT New forms of organization and changed production processes and technologies call for new workplace concepts. Flexibility is the universal requirement. Existing concepts may be adequate for partial solutions. With its new approach, however, Lista offers an all-embracing solution, comprising the table system, the superstructure system, the addon system and the space dividing system, which tables can also beconnected to. Whether asingle table, several workplaces, or a team cell is involved, the interlinking of electrics, electronics, compressedair supply and data make the Lista Space workplace system a concept with a guaranteed future. Lista,makingworkspace work. Superstructure system The superstructure system supports the shelves, rear panels, adapters for monitors and other brackets, container strips, supporting arms, light fittings and all supplyconduits forelectricity, compressedair, data, etc. Space division system The space division system organises individual workplaces into ateam space.wallelement screens canbe of differentmaterials andfitted with cabinets,shelves and other aids to organisation. Add-on system Future workplace requirements will involve greater mobility. Quality control will be decentralised to the points of production. Increased process orientation will require new forms of organisation. THE STANDARD COLOURS For technical reasons, the printed colours shown here may differ from the original shades. capri blue RAL 5019 light blue RAL 5012 reseda green RAL 6011 ruby red RAL 3003 pure white RAL 9010 lightgrey RAL 7035 metallic grey NCS S 6502-B black NCS S 9000-N /2007; LISTA 2007

17 OVERVIEW Triangular support The heart of the Lista Space system. Provides a rigid link betweenthe table andwallelements. Flexibility The scalene triangle supports are fitted according to the table depth. This ensures optimal workstation stability underall circumstances. Power conduits Power conduits are available for individual requirements. Perforated rear panel Awide range of rear panels: plain, round or square holes for customised workstations. Various types of keyhole hook sets are also available. Lighting Flicker-free lighting boosts productivity, quality, and general physical well-being. The results are less fatigue and lower reject rates. Electrification system Acompletesystemofcable conduitsdeliverselectricity to everyworkstation. Slottedshelves With raised long edge, attaches to shelf front or rear as preferred. Slot spacing 15 for subdivision using plain partitions. Load capacity up to 30kg. The shelves are fixed to thewallelement withoutscrews, usinga pair of brackets, horizontally or at an angle of 30. Small parts always to hand Equipment box for standard containers ensure optimal working conditions. 01/2007; LISTA

18 LISTA TABLE SYSTEM DIMENSIONS AND LOAD CAPACITIES Dimensions and load capacities for superstructure system Dimensions for space division /2007; LISTA 2007

19 superstructure space superstructure / division system Wall elements Wall elements for superstructure and space division system, consisting of frame sections with corner joint, levelling feet and adaption material. The wall element may be placed vertically or horizontally. 50 spacing and a standard T-slot for M8 profile nuts and screws are available for attaching adaptations. Specification: aluminium section, painted. Colour: light grey RAL Wall elements can be used only in conjunction with cabinets, tables or other wall elements. Profile nut Number Profile nut M8 20 Wall filler glass Wall filler for insertion in wall element for partitioning or screening. Specification: 5 safety glass, including rubber sealing. Colour: glass patterned. Nominal width Nominal depth Patterned glass Patterned glass Patterned glass Patterned glass Patterned glass Patterned glass Other surfaces and fillers on request. Wall filler hard laminated Wall filler for insertion in wall element for partitioning or screening. Specification: 6.4 coated hard laminate panels, including rubber sealing. Colour: Hard laminate board light grey NCS S 1500-N. Nominal width Nominal depth Hard laminate panel Hard laminate panel Hard laminate panel Hard laminate panel Hard laminate panel Hard laminate panel Other surfaces and fillers on request. 01/2007; LISTA

20 Triangular support The triangular supports (355 x 50 x 275) and their fixing material serve to join the table subelements with the superstructure system and to support the wall element. Specification: cast aluminium, painted. Colour: grey metallic NCS S 6502-B. Picture Add-on set: table sub-element to 1 wall element Add-on set: table sub-element to 2 wall elements Add-on set: one-sided to wall element Triangular support, single (all fastenings) Add-on kit for object foot Add-on kit for foot 5 The add-on set in figure 2 also includes the necessary 180 wall element connector. Add-on kits (figures 5 and 6) do not include wall element connectors, which must be ordered separately. Wall element connector 1 2 These serve to join the wall elements and are always screwed to the wall element joiners at top and bottom. Specification: steel, painted. Colour: light grey RAL Kit Picture Number x x /2007; LISTA 2007

21 organisational elements Rear panels plain The rear panels can be fitted into the wall element without screws and serve to screen or partition particular areas. Specification: sheet steel, painted. Colour: light grey RAL7035. Nominal width Rear panels slotted The rear panels can be fitted into the wall element without screws and serve to screen or partition particular areas. With 3.6 dia. circular perforation (for M4 x 10 Tapetite self-cutting screws), partitioning 19, and 10 x 10 square perforation, partitioning 38. Specification: sheet steel, painted. Colour: light grey RAL7035. Nominal width Keyhole hooks see chapter component parts. Adjustable shelves, slotted Shelves are fitted with one longitudinal raised edge which can be mounted either to front or rear. Slit spacing 15 for sub division with partition walls. The shelves are fixed to the wall element without screws, using a pair of brackets, horizontally or at an angle of 30. Specification: sheet steel, painted. Colour: light grey RAL7035. Brackets: sheet steel, painted. Colour: light grey RAL7035. Nominal width Nominal depth Thickness : taised edge Load capacity: 30kg with evenly distributed load. Incl. pair of brackets. Dividers For partitioning of the slotted shelves. Specification: sheet steel. Colour: light grey RAL7035. Dividers For shelf depths The spacing between the shelves is at least 25 more than the height of the separators. 01/2007; LISTA

22 Container strips To take storage containers sizes 2, 3 and 4. They are attached to the wall element without screws, horizontally or at an angle of 15. Specification: sheet steel, painted. Colour: light grey RAL7035. For container size Quantity of containers BG BG BG BG 2 6 Load capacity: 25kg Storage containers see chapter component parts. Double-jointed swivel arm The double-jointed swivel arm is attached to the wall element without screws. Fitting options: Monitor shelf and equipment box with container strips. Specification: square-section steel tube, painted. Colour: light grey RAL Carrying capacity kg The swivel arm is not finished with conductive paint. The equipment box is earthed to the workbench using the earthing cable supplied. Monitor shelf for swivel arm The monitor shelf may be used together with the swing arm for holding CRT screens (17 inches). The entire system is fitted with rotating bearings, with a pull-out keyboard holder and tilt compensation. Specification: sheet steel, painted. Colour: light grey RAL7035. Carrying capacity kg Auxiliary container rack carrying frame The carrying frame may be used in combination with the double-jointed swivel arm. With the straight or tilted container strip, containers of sizes 2, 3 and 4 may be mounted. It can also be installed directly on the table without the swivel arm. Specification: sheet steel, painted. Colour: light grey RAL7035. Carrying capacity kg /2007; LISTA 2007

23 CPU cradle Suspended CPU cradle; attaches to the table frame. Side grip adjustable for equipment approx wide. Specification: sheet steel, painted. Colour: light grey RAL Container strips for auxiliary container rack carrying frame The container strip will take storage containers of sizes 2, 3 and 4. It can be attached to the equipment box carrying frame without screws, either horizontally or at an angle of 15. Specification: sheet steel, painted. Colour: light grey RAL7035. For container size Quantity of containers Quantity of container strip Tool rail complete Tool rail with slide rail including ball-bearing runner and two supporting arms attached to the wall element without screws. The slide rail serves to carry assembly equipment or table lighting. The tool rail may be fitted with an additional slide rail. If assembly equipment is mounted in combination with table lighting, two slide rails are needed. To raise the load capacity to 30kg a third supporting arm is used. Specification: steel, painted. Colour: light grey RAL7035. Runner: galvanized steel. Nominal width Number of support arms Carrying capacity kg Pivoting tool rail The pivoting tool rail with a ball-bearing runner is attached to the wall element without screws and serves to take assembly equipment. Specification: sheet steel, painted. Colour: light grey RAL7035. Runner: galvanized steel. Equipment rails Carrying capacity kg /2007; LISTA

24 Accessories for tool rails Slide rail for tool rail and additional supporting arm. Nominal width Slide rail Slide rail Slide rail Slide rail Additional supporting arm Slide rail fastening Additional runner Additional runner, carrying capacity 2.5kg /2007; LISTA 2007

25 lighting Our lamps represent the latest advances in lighting technology. They won't flicker and are equipped with long-life, energy-saving bulbs. Good lighting enhances productivity, quality and comfort. It reduces fatigue and mistakes. Guarantee lighting: 2 years. Table lighting Suitable for full illumination of the workplace. The entire system is swivel-mounted. Specification: aluminium section, painted. Colour: bright yellow NCS S 0540-Y10R. Power supply with 2 metres of double insulated power cord. With on / off switch. Lamp W Type x 55 CH x 36 CH x 55 Schuko x 36 Schuko Other lamps on request. Lamp bracket for tool rail To provide easy attachment of the lamp to the wall element. Specification: steel, painted. Colour: light grey RAL7035. Adjustment range Lamp bracket for wall element To provide attachment of the lamp to the tool rail. Incl. fixing material. Colour: light grey RAL Local workplace lightening For local workplace illumination. The lamp is swivelmounted and adjustable. The swivel arm is attached to the wall element without screws. Specification: aluminium section, painted. Colour: bright yellow NCS S 0540-Y10R. Power supply with 1.5 metres of doubleinsulated power cord. Incl. swivel arm. Colour: light grey RAL Lamp W Type x 18 CH x 18 Schuko 01/2007; LISTA

26 energy supply Horizontal cable conduit on wall element For tidy organisation of cables and hoses. With covered cable feed-throughs, including four caps for cable feed-throughs and two end pieces. Cable conduit screwed onto wall element, incl. fixing material. Specification: sheet steel, painted. Colour: light grey RAL Corner joint 90 for horizontal cable conduit As joining element for two cable conduits at 90. With fold-out base, incl. fixing material. Specification: sheet steel, painted. Colour: light grey RAL / T-joint for horizontal cable conduit As joining element for three cable conduits at 90. With fold-out base, incl. fixing material. Specification: sheet steel, painted. Colour: light grey RAL Cross joint for horizontal cable conduit For joining four cable conduits at 90 each, including fixing material. Specification: sheet steel, painted. Colour: light grey RAL Vertical cable conduit on wall element For supplying energy from the floor to the horizontal cable conduit, incl. fixing material. Specification: sheet steel, painted. Colour: light grey RAL /2007; LISTA 2007

27 Horizontal wall cable conduit For locating transformers and neat organisation of cables and hoses. Attached without screws to wall element or suspended underneath table subelement with crossbeam. Including cable conduit brackets. Specification: sheet steel, painted. Colour: blue NCS S 4040-R80B. Colour of cable conduit brackets: light grey RAL Power conduit with safety switch For local power supply at the workplace. The power conduits are attached to the wall element without screws. They may be joined together (jumper cable required). Incl. fixing material. With built-in safety switch. Specification: sheet steel, painted. Colour: light grey RAL7035. Guarantee energy supply: 2 years. Fittings Type Sockets 4 x 230V, with on / off switch CH Sockets 4 x 230V, with on / off switch CH Sockets 6 x 230V, with on / off switch CH Sockets 6 x 230V, with on / off switch CH Sockets 4 x 230V, with on / off switch Schuko Sockets 4 x 230V, with on / off switch Schuko Sockets 6 x 230V, with on / off switch Schuko Sockets 6 x 230V, with on / off switch Schuko Other versions on request. Important: The power conduits connected over the jumper cable are not protected by the safety switch. It is possible on customer's request. Cable Picture Type Power cable CH Jumper cable CH/Schuko/F/GB Power cable Schuko 1 2 Vertical cable chain For energy supplying. Specification: plastic chain, incl. fixing material. Colour: black Horizontal / vertical cable junction For joining horizontal and vertical cable conduits. Specification: sheet steel / plastic, painted, including fixing material. Colour: black /2007; LISTA

28 Socket block Specification: Polyamide casing with 5 sockets and on/off switch. Incl. fixing material, with 3 m connecting cable. Mountable in horizontal wall cable conduit. Type CH Schuko /2007; LISTA 2007

29 assembly Trolleys Basic frame Frame with triangular supports and rubber swivel castors (2 with brakes 100 dia.) to hold shelves and container strips. The basic frame may be fitted with components on one or both sides. Two black handles included. Specification: aluminium sections, painted. Colour: frame aluminium grey metallic NCS S 3502-B, triangular support red NCS S2070-R structure incl. castors (118) Important: Load capacity 300kg with evenly distributed load. Container strips To take storage containers sizes 2, 3 and 4. They are attached to the wall element without screws, horizontally or at an angle of 15. Specification: sheet steel, painted. Colour: light grey RAL7035. For container size Quantity of containers BG BG BG BG 2 6 Load capacity: 25kg Storage containers see chapter component parts. Shelf with raised edging Shelf with raised edging is hung on both sides between the basic frame and foot triangles, and secured with screws. Shelving is restricted at the sides by a raised edge at the front and the foot triangles. Load capacity: 60kg. S pecification: sheet steel, painted. Colour: aluminium grey metallic NCS S3502-B / / /2007; LISTA

30 Securing brackets for container strip Securing bracket incl. fixing material for container strip. Also for retrofitting. Is fixed to the container strip and prevents the containers becoming detached on uneven floors. Specification: sheet steel, painted. Colour: aluminium grey metallic NCS S3502-B. Nominal width Rear panels plain The rear panels can be fitted into the wall element without screws and serve to screen or partition particular areas. Specification: sheet steel, painted. Colour: light grey RAL7035. Nominal width Rear panels slotted The rear panels can be fitted into the wall element without screws and serve to screen or partition particular areas. With 3.6 dia. circular perforation (for M4 x 10 Tapetite self-cutting screws), partitioning 19, and 10 x 10 square perforation, partitioning 38. Specification: sheet steel, painted. Colour: light grey RAL7035. Nominal width Keyhole hooks see chapter component parts. Adjustable shelves, slotted Shelves are fitted with one longitudinal raised edge which can be mounted either to front or rear. Slit spacing 15 for sub division with partition walls. The shelves are fixed to the wall element without screws, using a pair of brackets, horizontally or at an angle of 30. Specification: sheet steel, painted. Colour: light grey RAL7035. Brackets: sheet steel, painted. Colour: light grey RAL7035. Nominal width Nominal depth Thickness : taised edge Load capacity: 30kg with evenly distributed load. Incl. pair of brackets /2007; LISTA 2007

31 01/2007; LISTA

32 SUPERSTRUCTURE UNO THE SINGLE WORKSTATION SYSTEM The Lista Uno single workstation system allows you to tailor the workstation to your own individual requirements. The table is available in fixed height, non-mechanical height-adjustable and continuous, mechanical height-adjustable and hight-adjustable with electric motor versions. The simple construction and flexible multi-purpose back panels make organising the workstation simplicity itself. All accessories are readily combinable, and can be fitted in a few easy steps. Two fixing rails are attached to the underside of the table topfor mounting the drawer cabinet, foot rest, etc. The system range is roundedoff by modular elements, including assembly trolleys and mobile drawer cabinets. The expansion options of thelista Uno workstation system aredetermined bythe individual application. THE STANDARD COLOURS For technical reasons, the printed colours shown here may differ from the original shades. capri blue RAL 5019 light blue RAL 5012 reseda green RAL 6011 ruby red RAL 3003 pure white RAL 9010 lightgrey RAL 7035 metallic grey NCS S 6502-B black NCS S 9000-N /2007; LISTA 2007

33 OVERVIEW Power conduits Power conduits are available for individual requirements. Small parts always to hand Equipment box for standard containers ensure optimalworkingconditions. DIMENSIONS AND LOAD CAPACITIES Attention: Maximumevenly distributed load on table with superstructure: 200kg, table electrically height-adjustable: 150kg. No load capacity at the rear. 01/2007; LISTA

34 superstructure uno Table structure Support pillars for table system Two support pillar heights are available. The height of 350 or 1000 is measured to the top surface of the table top. The superstructure can be fitted at a spacing of 1000 or 1255 and moves with the table. Specification: steel section, perforated front and rear at a spacing of 50 for screw-free fitting of add-on components. All fixing materials are included in the package (without crossbeam). Colour: light grey RAL A B Adjustment range C / / / / 1000 Suitable for 700 and 800 panel depths. Cannot be used with 900 panel depth. Crossbeam Screwed to the feet, stabilises free-standing table subelements. Colour: light grey RAL Table sub-element width Not in connection with Lista Uno. Important: When fitting a horizontal wall cable conduit or energy conduit inside a crossbeam, choose a conduit one size smaller than the crossbeam /2007; LISTA 2007

35 organisational elements Tool rail complete The support arms are screwed to the support pillars and carry the rail section, which is equipped with a ball-bearing mounted carriage. The rail section is freely adjustable to the depth of the workstation. Consisting of two support arms, and rail with runner. Specification: steel. Colour: light grey RAL7035. Carrying Table width capacity kg Additional tool rails For basic rail units. With mountings. Without runner. Table width Additional runner Additional runner, carrying capacity 2.5kg Plain rear panels Supports can be fitted with partial or full rear panels. All panels can be fitted into supports without screws. Specification: sheet steel. Colour: light grey, RAL Rear panels perforated Supports can be fitted with partial or full rear panels. All panels can be fitted into supports without screws. Perforated with round holes Ø 3.6 (for M4 x 10 Taptite self-cutting screws), spacing 19 or square holes 10 x 10, spacing 38. Specification: sheet steel. Colour: light grey, RAL /2007; LISTA

36 Slotted shelves with raised edge Slotted shelves are fitted with raised edge along the rear. Slot spacing 15 for partitioning using dividers. The adjustable shelves are fitted with two brackets horizontally into the supports. No fixing screws required. Specification: sheet steel. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth Including two brackets each. Max. load: 25kg Shelf height: strip Dividers For partitioning of the slotted shelves. Specification: sheet steel. Colour: light grey RAL7035. Dividers For shelf depths The spacing between the shelves is at least 25 more than the height of the separators. Hinged shelves Using the two brackets supplied, hinged shelves are installed in the frame without the need for screws, and are infinitely adjustable between the horizontal and 30. The raised edge at the front and rear stops items dislodging. Specification: sheet steel with clamping lever. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth Shelf height: raised edge Carrying capacity: 50kg Single-jointed swivel arm Adjustable for depth and fitted on the support. Can be used for: auxiliary box holder, container shelf, container mountings, monitor shelf. Specification: square steel tube. Colour: light-grey RAL Carrying capacity kg /2007; LISTA 2007

37 Double-jointed swivel arm Mounted on the vertical support. Can be used for: auxiliary box holder, container shelf, container mountings, monitor shelf. Specification: square steel tube with double joint. Colour: light-grey RAL Carrying capacity kg ~ Attention: The swing arm does not have a conductive paint finish. The equipment box is earthed to the bench using the earthing cable supplied. Monitor shelf Rotating monitor shelf, angle infinitely variable. Extending keyboard stand with stop. Specification: sheet steel. Colour: light grey RAL7035. Carrying capacity kg Attention: Only use the monitor shelf for monitors! It is unsuitable for storing ESD-sensitive items. Monitor shelf with double-jointed swivel arm Monitor shelf with double-jointed swivel arm, complete Equipement swivel arm Rotating, inserts into the vertical support. Equipment shelf 285 x 285 with raised edge all round. Specification: sheet steel. Colour: light grey RAL7035. Carrying capacity kg Auxiliary container rack Three inclined shelves for up to 15 containers of size 3. Carrying handles at side. Can be inserted into the auxiliary box mounting. Specification: sheet steel. Colour: light grey RAL Auxiliary container rack mounting With pegs for insertion into swivel arms. Specification: sheet steel. Colour: light grey RAL7035. Carrying capacity kg /2007; LISTA

38 Container strips For containers of size 2, 3 and 4, inserts into supports, no fixing screws required. Specification: sheet steel. Colour: light grey RAL7035. For container size Quantity of containers , 3, , 7, , 3, , 9, /2007; LISTA 2007

39 lighting Guarantee lighting: 2 years. Waldmann universal light This universal light fixture brings light where you need it. The reflective parabolic grid in the lamp head provides absolutely non-reflective illumination of the work surface. An integrated electronic ballast ensures flicker-free light. Specification: 1 x compact fluorescent light, 36W. Colour: light grey RAL Working distance Lamp Type Specification x 118 x CH With column mounting x 118 x CH With bench stand x 118 x Schuko With column mounting x 118 x Schuko With bench stand Clip-on magnifying glass for universal light A magnifying glass can be easily clipped on to the body of the light in seconds. This makes the lamp suitable for universal applications, and the clip-on magnifying glass can be used on its own. Lens Magnification x Table lighting The table lighting fixture is attached to the equipment rail using the enclosed fitting materials. The angle of the fixture can be adjusted to provide optimal ergonomic lighting. The reflective parabolic grid in the lamp head ensures bright, uniform, non-reflective illumination. Complete with an electronic ballast. Specification: lamp casing: aluminium. Colour: light grey RAL Fixing materials and tube included. Lamp W Type x 36 CH x 40 CH x 36 Schuko x 40 Schuko Table lamps A simple lamp on a telescopic arm for table-top mounting. Stem diameter: 13. The arm is 1040 long. Specification: 2 x 15W without electronic ballast. Integral switch. Colour: light grey RAL7035. Lamp Working distance Type Specification x 60 x CH with cable clamp x 60 x Schuko with cable clamp Circular illuminated magnifying glass Simple illuminated magnifying glass with a 3 dioptre optical lens for table-top mounting. Stem diameter: 13. Specification: 22W. Colour: light grey RAL Lens Magnification Type Specification x CH with cable clamp x Schuko with cable clamp 01/2007; LISTA

40 Lamp bracket For coercially available lamps with 16 or 18 shaft diameter (with sleeve). Specification: sheet steel, galvanised. Magnification Carrying capacity kg Shaft diameter: 16 / /2007; LISTA 2007

41 power conduits Power conduits either fit into the support pillars without screws, or screw to the bench top (holes are not pre-drilled). Power conduits are supplied with a choice of sockets: Type 13 (CH version), Schuko, France (Type F) or England (Type GB). All socket types are for 230V. Available with fault-current protective switches (personal protection switches). Each power conduit is supplied with a 3 metre connection cable. Specification: sheet steel, painted / IP-20. Colour: light grey RAL Guarantee power conduits: 2 years. With safety swtich Type CH Fittings Type Sockets 4 x 230V, with on / off switch CH Sockets 4 x 230V, with on / off switch CH Type Schuko Fittings Type Sockets 4 x 230V, with on / off switch Schuko Sockets 4 x 230V, with on / off switch Schuko Attention: The power conduits connected over the jumper cable are not protected by the safety switch. It is possible on customer's request (note this on the supplier order). Socket block Specification: Polyamide casing with 5 sockets and on/off switch. Incl. fixing material, with 3 m connecting cable. Mountable in horizontal wall cable conduit. Type CH Schuko /2007; LISTA

42 workstation superstructures Keyhole hooks for square holes To fit rear panels with square holes. Specification: sheet steel. Colour: alu grey. Keyhole hook sets Sets 1 and 2 suitable for minimal tool set, sets 3 and 4 suitable for normal tool sets. 1, 2 Set Quantity , 4 Tool holder with inclined hook end Diameter Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Inclined hook for lock nut and socket key / 40 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Tool holder with vertical hook end Diameter Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Tool clamp Diameter Double tool holder with vertical hook end Diameter Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items /2007; LISTA 2007

43 Tool clamp with large base plate Diameter Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Base plate, do-it-yourself mounting / assembly Small Large Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Magnetic holder Diameter Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Holder for storage bin (single compartments) For size 2 and 3 Pipe holder, also suitable for cable, etc. Diameter Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Pliers / Pincer holder Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Saw holder (used in pairs) For 4 saws Price indication per item. The minimum ordering quantity per article is 2 items. Further ordering quantities are only possible in increments of 2 items. Machine holder Diameter /2007; LISTA

44 Cable holder Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Screwdriver holder For 6 parts For 12 parts Holder for storage bin (five compartments) For size 2 and For size 2 and 3 Hexagonal socket holder, diameter Vertical wrench holder For 8 wrenches Drill holder / Hexagonal socket holder For 14 parts For 28 parts Nut retention recess holes Vertical wrench holder, for 10 wrenches / / /2007; LISTA 2007

45 Combination switch, 2-part Roll retainer holder Tool holder for round sockets Diameter Single Triple Shelf Tool adapter for do-it-yourself drilling Top Plastic Steel shelf / Shelf Forms rack for DIN A4 Colour light-grey 01/2007; LISTA

46 storage containers Size 2 Colour Capacity dm Red Blue Green Yellow Size 3 Colour Capacity dm Red Blue Green Yellow Size 4 Colour Capacity dm Red Blue Green Yellow Size 5 Colour Capacity dm Red Blue Green Yellow Size 6 Colour Capacity dm Red * Blue * Green * Yellow * * These storage bins do only fit diagonally in container cabinets. Accessories For size 2 Number Transparent foil Labelling strips For size 3 Number Transparent foil Labelling strips /2007; LISTA 2007

47 For size 4 / 5 / 6 Number Transparent foil Labelling strips /2007; LISTA

48 OVERVIEW Drawer systems NC storage and transport systems Workstations > Workstation systems > Workbenches > Modular workbenches > Stands and assembly trolleys > Chairs and stools Clothes lockers and material cabinets Shelf systems Dynamic storage technology Office systems ESD Electronic locking systems and access control systems Partition material /2007; LISTA 2007

49 Table of content Workbenches Introduction 50 Ordering examples 57 Workbench tops 67 Accesories for workbench tops 75 Workbench leg assemblies Leg assemblies 79 Support consoles 82 Workbench drawer 83 Vice cabinets 84 Vices and height-adjustment units 86 Storage shelves 88 27x36E Drawer cabinets 89 27x36E Sets of partition material for drawers 91 Workbench superstructures Ordering examples 93 Component parts 97 Storage containers 105 Power conduits 108 Hexagonal workbench /2007; LISTA

50 WORKBENCHES The classical workplace. With its variety of possible combinations, this system enables practical, space-saving workplace configurations. The organizational possibilities offered byits drawers, vice and support consoles,and multi-purpose back panels, ensure optimum working conditions based on ergonomic insights. Lista, making workspace work. THE STANDARD COLOURS For technical reasons, the printed colours shown here may differ from the original shades. capri blue RAL 5019 light blue RAL 5012 reseda green RAL 6011 ruby red RAL 3003 pure white RAL 9010 lightgrey RAL 7035 metallic grey NCS S 6502-B black NCS S 9000-N /2007; LISTA 2007

51 WORKBENCH TOPS Multiplex tops Product features W orkbench top of steam-treated beech veneer, waterproof cross-clued multilay er,bevelled edges, planed andoiled surface.the topissplash-proof,dirt-repellent and largely insusceptible to oil and grease. A dditional features Sheet metal, steel edge protector, rear and side panels are available on demand. Range of application A ll-purpose foruniversalapplication Beech tops Product features Made of steam-treated beech strips, waterproof clued, bevelled edges, planed and oiled surface. The top is splash-proof, dirt-repellent and largely insusceptible to oil and grease. Additional features Steeledge protector, rear andside panelsare available on demand. Range of application Appropriatefor heavylabour in thesteel and machineconstruction, in metalwork shop, repair shops and schools Urphen tops Product features Utility layer made of compression-proof, durable Urphen.UV finish is resistant to chemicals. Urphen is extremely resistant, splash-proof, dirt-repellent and insusceptible to oil and grease. Additional features Steeledge protector, rear andside panelsare available on demand. Colours: green C / blue O / grey K / red D Hard laminate tops Product features Workbench top resistant to most chemicals, with an easily cleaned, textured surface.top finished with hard laminate of 0.7 thickness. Additional features Rear andside panelsare available on demand. Range of application Appropriate for benches, electronics assembly, office tables and desks. Range of application Appropriate for workstations/assembly areas, inspection stations, desks, packing tables, schools, metalwork shop, precision mechanics, workshops, industry, machine construction, etc. 01/2007; LISTA

52 WORKBENCH LEG ASSEMBLIES AND SUPERSTRUCTURES Leg assemblies Strong sheet steel design of welded, pressed-steel profiles with holes for securing workbench tops and storage shelves. 2 fixed heights and height-adjustable leg assemblies at 25 to comply with the most various requirements. Mobile version. Carrying capacity max. 400 kg. Drawer cabinets Well proven drawer cabinets in various sizes ideally complement the workbench product range. For tool storage within easy reach of the workstation. Also suitable for mobile workbenches. Support consoles Forelectrical andcompressed air supplies of theworkstation. The support console is prepared for fitting customised equipment. Vice cabinets The vice cabinet consists of ahousing with sliding doors and cylinder lock. The cabinet can be fitted with vice and hinge equipment asrequired. When not in use, thevicecan easilybemovedintothe cabinet under the workbench. Support pillars Supportpillars areavailable in threeheights andwith the help of astabilising steel profile bolted directly to the workbench top or the leg assembly respectively. Supportpillars arerequired foradding adjustable shelves, container strips, power conduits,rear panelsand tool rails. Perforated rear panels Rear panels with smooth surface,round or square holes allow to individually equip the workstation. Keyhole hooks are availablein various specifications. Adjustable shelves Fitted with alongitudinal raised edge,either to frontor rear. Available in planeorslotted version, horizontally or at an angle of 15.Carrying capacity max. 25 kg. Shelves with retainer top To extend the workstation shelf area. -adjustable consoles for 4 different heights. Tool rails Horizontal support arms are inserted into the vertical supports without needing securing screws. They support therails,whichisfittedwith aball-bearingrunner. The rail can be positioned at any workstation depth and easily holds lamps and spring-type equipment /2007; LISTA 2007

53 DIMENSIONS SUPPORT DISTANCES With 2 or 3 legs assemblies With and without shelf. A A 750/ B B B Detail A Detail A D D D C C Top Support Clear length Top type Hard Number span shelf span A Multiplex Beech Urphen laminate of leg B C D assemblies x Detail A With leg assemblies/drawer cabinet 27x36 E With and without shelf. Workbenches are also available with drawer cabinets in sizes18x27e, 18x36E, 27x27E,36x27Eand 36x36E. A D C 40 Top Support Clear length Top type Hard Number span Shelf span A Multiplex Beech Urphen laminate of leg B C D assemblies /2007; LISTA

54 DIMENSIONS Dimensions rear / side panels /800 L S Top thickness Rear panel height S L Top type Multiplex Beech Urphen Hard laminate Adjustable-height shelf M 200 N x " ø35 x <800 x = Top depth Top Shelf Spacing length M No.of N supports Max. support distance /2007; LISTA 2007

55 DIMENSIONS Max. bench top load rating per unit area Details applyto auniform static load. D D D D D D Support 750 / 800 span Multiplex Multiplex Beech Urphen Hard laminate D kg kg kg kg kg Max. clear span Maximumload rating 400kg usingfixed-height legs and200kg usingmobile workbenchwith castors. 400kg 200kg 01/2007; LISTA

56 SELECTED COMBINATIONS Workbench leg assembly/drawer cabinet S / H F G Required height (H) Workbench leg J 6 E = 800 J 4 E = 850 J 5 E = Required height (H) Workbench leg B 312 F = 700 B 315 F = 800 B 314 F = 850 B 313 F = 1000 Base G = 50 Base G = 100 Top type Multiplex Beech Urphen Hard laminate Top thickness S Workbench leg assembly / support console / vice cabinet S S / I E K E Required height (H) Workbench leg J 6 E = 800 J 4 E = 850 J 5 E = Required height (H) Support console J 23 I = 800 J 25 I = 850 Required height (H) Vice cabinet J 40 K = 800 J 42 K = /2007; LISTA 2007

57 workbenches ordering examples 840/850 high Note: The workbenches in these order examples are illustrated with size 27x36E drawer cabinets. Each workbench is also available with drawer cabinets in sizes 18x27E, 18x36E, 27x27E, 36x27E and 36x36E. 2 feet, top 750 Top type Multiplex Multiplex Multiplex Multiplex Multiplex Multiplex Beech Beech Beech Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 2 workbench leg assemblies J6 2 feet, top, storage shelf 750 Top type Multiplex Multiplex Multiplex Multiplex Multiplex 40 * Multiplex Multiplex Multiplex Multiplex Multiplex 50 ** Beech Beech Beech Beech Beech 50 ** 01/2007; LISTA

58 800 Top type Multiplex Multiplex Multiplex Multiplex Multiplex 40 * Beech Beech Beech Beech Beech 50 ** Urphen Urphen Urphen Urphen Urphen 50 * 1 workbench top 2 workbench leg assemblies J6 1 storage shelf * with 3 workbench leg assemblies ** with strut 2 feet, top, workbench drawer 750 Drawer: 150 EA Top type Multiplex Multiplex Multiplex Multiplex Multiplex Multiplex Beech Beech Beech Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 2 workbench leg assemblies J6 1 workbench drawer J12 2 feet, top, B Drawers: 50 EA; 150 EA Top type Multiplex Multiplex Multiplex Multiplex Multiplex Multiplex Beech Beech Beech /2007; LISTA 2007

59 800 Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 2 workbench leg assemblies J6 1 drawer cabinet B309, feet, top, B Top type Multiplex Multiplex Multiplex Multiplex Multiplex Multiplex Beech Beech Beech 50 Drawers: 50 EA; 100 EA; 150 EA 800 Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 2 workbench leg assemblies J6 1 drawer cabinet B310, feet, top, B Top type Multiplex Multiplex Multiplex Multiplex Multiplex Multiplex Beech Beech Beech 50 Drawers: 50 EA; 75 EA; 125 EA; 200 EA 01/2007; LISTA

60 800 Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 2 workbench leg assemblies J6 1 drawer cabinet B311, Foot, top, B312, storage shelf 750 Drawers: 75 EA; 100 EA; 125 EA; 300 EA Top type Multiplex Multiplex Multiplex Multiplex Multiplex Multiplex Beech Beech Beech Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 1 workbench leg assembly J6 1 drawer cabinet B312 incl. housing base 100, storage shelf Foot, top, B Drawers: 75 EA; 100 EA; 100 EA; 150 EA; 300 EA Top type Multiplex Multiplex Multiplex Multiplex Multiplex Multiplex Beech Beech Beech /2007; LISTA 2007

61 800 Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 1 workbench leg assembly J6 1 drawer cabinet B315, Foot, top, B Top type Multiplex Multiplex Multiplex Multiplex Multiplex Multiplex Beech Beech Beech 50 Drawers: 50 EA; 100 EA; 100 EA; 100 EA; 150 EA; 200 EA 800 Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 1 workbench leg assembly J6 1 drawer cabinet B315, Support console, plate, B Top type Multiplex Multiplex Multiplex Multiplex Multiplex Multiplex Beech Beech Beech 50 Drawers: 50 EA; 100 EA; 100 EA; 150 EA; 300 EA 01/2007; LISTA

62 800 Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 1 support console J23 1 drawer cabinet B315, Drawers on the left side: 75 EA; 75 EA; 100 EA; 100 EA; 150 EA; 200 EA Drawers on the right side: 50 EA; 100 EA; 100 EA; 150 EA; 300 EA Top, B315, B Top type Multiplex Multiplex Multiplex Multiplex Beech Beech Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 2 drawer cabinets B315, / Drawers: 50 EA; 100 EA; 150 EA 2 feet, 1 x wheels, top, B310, vice 750 Top type Multiplex Multiplex Multiplex Multiplex Multiplex Multiplex Beech Beech Beech 50 1 workbench top 1 workbench leg assembly with handle 1 workbench leg assembly with fixed castors 1 strut 1 Heuer-vice, jaw width drawer cabinet B310, /2007; LISTA 2007

63 Foot, vice cabinet, top, B Top type Multiplex Multiplex Multiplex Multiplex Multiplex Beech Beech Beech 50 1 workbench top 1 workbench leg assembly J6 1 vice cabinet J40 (with Heuer vice, 120 jaw width, with height adjustment unit) 1 drawer cabinet B310, Drawers: 50 EA; 100 EA; 150 EA Foot, top, B315 with door 750 Top type Multiplex Multiplex Multiplex Multiplex Multiplex Multiplex Beech Beech Beech 50 1 workbench top 1 workbench leg assembly J6 1 drawer cabinet B315, AB = pull-out shelf Drawers: 50 EA; 100 EA; 100 EA; 450; AB Top, B315, B315 with door 750 Top type Multiplex Multiplex Multiplex Multiplex Beech Beech 50 1 workbench top 2 drawer cabinets B315, / VB = adjustable shelf AB = pull-out shelf Drawers on the left side: 50 EA; 75 EA; 75 EA; 100 EA; 100 EA; 100 EA; 100 EA; 100 EA Drawers on the right side: 100 EA; 600; VB; AB Foot, top, B315, B Top type Multiplex 40 * Multiplex 50 * Beech 50 1 workbench top 1 workbench leg assembly J6 2 drawer cabinets B315, / * Multiplex workbench top butt-jointed (2 x 1500) Drawers on the left side: 75 EA; 75 EA; 100 EA; 100 EA; 150 EA; 200 EA Drawers on the right side: 50 EA; 100 EA; 100 EA; 150 EA; 300 EA 01/2007; LISTA

64 Top, B315, B315, B315 with door 750 Drawers on the left side: 50 EA; 75 EA; 75 EA; 100 EA; 100 EA; 100 EA; 100 EA; 100 EA Centre drawers: 50 EA; 100 EA; 100 EA; 150 EA; 300 EA Drawers on the right side: 100 EA; 600; VB; AB Top type Multiplex 40 * Multiplex 50 * Beech 50 1 workbench top 3 drawer cabinets B315, / / * Multiplex workbench top butt-jointed (2 x 1500) VB = adjustable shelf AB = pull-out shelf /2007; LISTA 2007

65 ordering examples 890/900 high Note: The workbenches in these order examples are illustrated with size 27x36E drawer cabinets. Each workbench is also available with drawer cabinets in sizes 18x27E, 18x36E, 27x27E, 36x27E and 36x36E. 2 feet, top 800 Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 2 workbench leg assemblies J4 Foot, top, B Top type Multiplex Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 1 workbench leg assembly J4 1 drawer cabinet B314, Drawers: 50 EA; 100 EA; 100 EA; 200 EA; 300 EA Support console, plate, B Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 1 support console J25 1 drawer cabinet B314, Drawers: 50 EA; 100 EA; 100 EA; 200 EA; 300 EA 01/2007; LISTA

66 Drawers on the left side: 75 EA; 100 EA; 100 EA; 100 EA; 125 EA; 250 EA Drawers on the right side: 50 EA; 100 EA; 100 EA; 200 EA; 300 EA Top, B314, B Top type Multiplex Multiplex Multiplex Beech Beech Beech Urphen Urphen Urphen 50 1 workbench top 2 drawer cabinets B314, / /2007; LISTA 2007

67 workbench Tops multiplex Tops,40 / 50 Thickness Note Other workbench top specifications and dimensions on request. Steam-treated beech veneer, waterproof glued multilayer (DIN ), bevelled edges, surface planed and oiled. Top resistant to spray water and dirt and largely resistant to oil and grease. Multiplex tops, 40 / 50 thickness 750 Top length Top thickness Top depth Top length Top thickness Top depth Multiplex tops with rear panel, 40 / 50 thickness Rear panel height 150, thickness 19. Rear panel from MDF (medium density fibreboard). 750 Top length Top thickness Top depth /2007; LISTA

68 800 Top length Top thickness Top depth Multiplex tops with angled steel edge protection at front, 40 / 50 thickness 750 Top length Top thickness Top depth Top length Top thickness Top depth Multiplex tops with angled steel edge protection at front and rear panel, 40 / 50 thickness Rear panel height 150, thickness 19. Rear panel from MDF (medium density fibreboard). 750 Top length Top thickness Top depth /2007; LISTA 2007

69 800 Top length Top thickness Top depth /2007; LISTA

70 beech Tops,50 Thickness Information on quality and storage: Lista guarantees that its beech timbers are in perfect quality when they leave our factory. This is a naturel wood product. Knots or markings occur on the underside of the timbers. The timbers must be stored horizontally, on a flat base, dry, protected from the weather and covered on both sides. Fluctuations in humidity should be avoided. Steam-treated beech strips, waterproof glued (adhesive class D3), bevelled edges, surface planed and oiled. Top resistant to spray water and dirt and largely resistant to oil and grease. The surface may exhibit slight wood colouring and swirls (DIN quality class 1). Beech tops, 50 thickness 750 Top length Top depth Top length Top depth Beech tops with rear panel, 50 thickness Rear panel height from surface of workbench top 100, thickness 19. Rear panel from MDF (medium density fibreboard). 750 Top length Top depth Top length Top depth /2007; LISTA 2007

71 Beech tops with angled steel edge protection at front, 50 thickness 750 Top length Top depth Top length Top depth Beech tops with angled steel edge protection at front and rear panel, 50 thickness Rear panel height from surface of workbench top 100, thickness 19. Rear panel from MDF (medium density fibreboard). 750 Top length Top depth Top length Top depth /2007; LISTA

72 urphen Tops,50 Thickness Note: Other workbench top specifications and dimensions on request. Utility layer made of compression-proof, durable Urphen with a gross density of >1000kg/m 3. UV finish is resistant to chemicals (complies with DIN A). Urphen is extremely resistant, splash-proof, dirt-repellent and insusceptible to oil and grease. Centre core of stiff compressed chipboard, quality class E1 (DIN ). Backed with hard particle board and beech edging. Colors: green C / blue O / grey K / red D Urphen tops, 50 thickness With hardwood edging on all-sides. 750 Top length Top depth ** Top length Top depth ** 800 ** One-piece centre core, top butt-jointed at centre! Urphen tops with rear panel, 50 thickness With hardwood edging on 3 sides. Rear panel height from surface of workbench top 100, thickness 19. Rear panel from MDF (medium density fibreboard). 750 Top length Top depth ** Top length Top depth ** 800 ** One-piece centre core, top butt-jointed at centre! /2007; LISTA 2007

73 Urphen tops with angled steel edge protection at front, 50 thickness With hardwood edging on all-sides. 750 Top length Top depth ** Top length Top depth ** 800 ** One-piece centre core, top butt-jointed at centre! Urphen tops with angled steel edge protection at front and rear panel, 50 thickness Rear panel height from surface of workbench top 100, thickness 19. Rear panel from MDF (medium density fibreboard). 750 Top length Top depth ** Top length Top depth ** 800 ** One-piece centre core, top butt-jointed at centre! 01/2007; LISTA

74 hard laminated Tops,40 Thickness Note: Other workbench top specifications and dimensions on request. Workbench top resistant to most chemicals and an easy-to-clean structured surface. Top finished in hard laminate (HPL 0,7, DIN / EN 438). Centre core of stiff compressed chipboard, almost distortion free. Quality class E1 (DIN ). Backed with laminated. Hard laminated tops light grey, 40 thickness Back laminated, with grey adhesive edging. Laminate colour: top light grey NCS S 1500-N. 750 Top length Top depth Top length Top depth /2007; LISTA 2007

75 accessories for workbench Tops Angled steel edge protection Edge protector set into workbench top, assembly complete. Specification: sheet steell. Colour: grey NCS S-4502-B. For top thickness Angled steel edge 38 / / 50 per lm protection (L-profile) Angled steel edge protection (U-profile)* per lm * Urphen tops Welded corners for steel edge protection If steel edge protection continues over one or more corners of the workbench top, a welded corner must be included for each one. Picture Number Welded corner 1, 2, 3 1, 2, 4 Metal cover Metal covering for multiplex tops, with or without rear panel Stainless steel cover 1.5 per m² Aluminium cover 2 per m² Metal steel cover 1.5, sendzimir galvanised per m² Calculation schematic: all dimensions in metres, rear panel height 150! E: Cover for workbench top surface = nominal depth x top length F: Cover for workbench top surface with rear panel = ( nominal depth) x top length Caution: Danger of corrosion with sendzimir galvanised steel. Recoendation: stainless steel cover. Variante F Variante E Max. special sizes Multiplex tops Multiplex tops 40, surface treated, bevelled edges Max. support distances 1800 Max. lenght Thickness per m² Multiplex tops Multiplex tops 50, surface treated, bevelled edges Max. support distances 2300 Max. lenght Thickness per m² 01/2007; LISTA

76 Beech top Max. lenght Thickness Beech tops, surface treated, bevelled per m² edges Max. support distances 2300 Urphen top Max. lenght Thickness Urphen tops, per m² without edges Urphen tops, hardwood edging per lm Max. support distances ** From 2500 top, finish butt-joined at centre, one-piece core Hard laminate top Max. lenght Thickness Hard laminate per m² tops, top green, with edges black Hard laminate tops, top light grey with edges grey per m² Max. support distances 1220 Rear panels Rear panels are bolted to workbench top (multiplex, beech), including fastening material. Rear panels are delivered as loose elements. Specification: MDF (medium density fibre) board, height 150, transparent primer finish. For workbench length Thickness max. 19 per lm Side panels Side panels are bevelled at the front and bolted to workbench top (multiplex, beech), including fastening material. Specification: MDF (medium density fibre) board, height 150, transparent primer finish. For workbench length Thickness max. 19 per lm /2007; LISTA 2007

77 Shelves with raised edging Specification: MDF (medium density fibre) board with 8 raised beech edging on rear and sides, transparent primer finish all-round, without brackets. For top length Thickness Brakets needed per lm Max. support distance: adjustable brackets Brackets allow adjustment of raised-edge shelf to four different heights. Bolted through workbench top (preassembly required). Specification: square steel tube, including fastening material. Colour: light grey RAL Adjustable-height above top , 270, 310, Pre-assembly per bracket 01/2007; LISTA

78 workbench connectors Connecting bracket over workbench leg assembly Connects two workbenches flush with a wooden spring and groove above the workbench leg assembly. Kit includes: groove and wooden spring, including 2 tensioning screws for workbench leg assembly. Top depth Spring length Spring width Thickness Connecting bracket above cabinet Butt joint suitable for drawer cabinet (free-standing), support console or vice cabinet. Connects workbench top flush with wooden spring and groove above the cabinet for workbenches arranged back-to-back or in a row. Kit includes: groove and wooden spring. 13 Top depth Spring length Spring width Thickness Connector plate Connects the 90 extension to the work top. Secured with sleeves and hexagon head screws, including fastening material. Made of sheet steel. Colour: light grey RAL Thickness Workbench top connectors with tensioner Workbench tops can be securely joined on the underside using insert tensioners. The required cut-outs are included. Workbench top connectors in steel. Incl. preassembly. Top length * * For workbench tops with chipboard centre core (ESA). Pre-assembly to workbench top Pre-assembly to workbench top /2007; LISTA 2007

79 workbench leg assemblies leg assemblies Fixed-height and adjustable height leg assemblies The Lista workbench assembly is a strong sheet steel design of welded, pressed steel profiles with holes for securing the workbench top. Holes are also provided in the base for anchoring to the floor. Specification: sheet steel. Colour: according to colour chart. Type Carrying capacity kg J J J5 * * -adjustable at 25 increments Struts Struts to match leg assembly, including fastening material. Specification: sheet steel. Colour: according to colour chart. For top length Strut length * 1648 (2 x 824) * 2148 (2 x 1074) * 2648 (2 x 1324) * Bench top single- or two-piece with 3 workbench leg assemblies, two-piece struts. Fastening material Fastening material with 6 screws without pre-assembly Fastening material (6 screws) including pre-assembly Workbench leg assembly, adjustable height Workbench leg assembly for workstations, easy height adjustment for bench tops under load. adjustment by means of 4 hydraulic cylinders integrated into the two assemblies and driven by a hydraulic pump with folding crank mounted under the workbench top. Workbench top according to workstation requirements. Fully assembled. Specification: sheet steel. Colour: according to colour chart. Leg assembly for bench top size Minimum height Adjustment range Carrying capacity kg x 750 / /2007; LISTA

80 Mobile leg assemblies, fixed height Mobile workbench leg assemblies, made up as required from leg assembly with handle, leg assembly with fixed castors, or leg assembly with swivel castors and handle. Depending on the type of floor, either nylon or rubber castors are available. Workbench top according to workstation requirements. Matching vice and drawer cabinet complement this workstation optimally. Specification: sheet steel. Colour: according to colour chart. With handle Carrying capacity kg With 2 fixed castors Execution Wheel Ø Carrying capacity kg Nylon Rubber With 2 swivel castors Execution Wheel Ø Carrying capacity kg Nylon Rubber With 2 swivel castors and handle Execution Wheel Ø Carrying capacity kg Nylon Rubber Mobile leg assemblies, adjustable height Leg assemblies for adjustable-height workbenches, with two locking swivel castors or two fixed castors. Depending on the type of floor, either nylon or rubber castors are available. Workbench top according to workstation requirements. Specification: sheet steel. Colour: according to colour chart. With 2 fixed castors Execution Wheel Ø Carrying capacity kg Nylon Rubber /2007; LISTA 2007

81 With 2 swivel castors Execution Wheel Ø Carrying capacity kg Nylon Rubber Keyhole hooks for square holes Fastening material with 6 screws without pre-assembly Fastening material (6 screws) including pre-assembly 01/2007; LISTA

82 support consoles Support consoles The support console consists of a casing with side doors and cylinder lock. Partition for compressed air connection inside the upper section. Two vertical C profiles are provided in the lower section for distributors, contactors, transformers etc. Cut-outs in the front panel are intended for blank covers or sockets. Power and air supply holes in the side and base. The support console is designed for installation at the left or right and includes one blank cover. Specification: sheet steel. Colour: according to colour chart. Type J23 Door mounted at right J23 Door mounted at left J25 Door mounted at right J25 Door mounted at left Fastening material Fastening material with 4 screws without pre-assembly Fastening material (4 screws) including pre-assembly Socket panels Various panels can be fitted to the socket box or to the support console, secured by four screws. Specification: sheet steel. Colour: black NCS S9000- N Panel for 4 sockets Panel for 3 sockets and 1 test terminal Panel for 3 sockets (Schuko) Duy cover, no holes, for installation by customer Supply excludes sockets or test terminals! /2007; LISTA 2007

83 workbench drawer Workbench drawer For neat, orderly storage of hand tools at the workstation. Sheet steel housing for drawer 150EA can be mounted under the workbench with screws and anchor caps. With cylinder lock. Specification: sheet steel. Colour: housing and drawer fronts according to colour chart. Type J J12 * * Including fastening material without pre-assembly Blank labels Blank labels, specially designed for use with the Lista Script labelling software, are available as A4 paper sheets, for use with all popular PC printers. Label size Number of A4 sheets / number of labels x 22 / 70 x 22 5 sheets = 50 / 150 labels Software on the internet: 01/2007; LISTA

84 vice cabinets The vice cabinet consists of a housing with sliding doors and cylinder lock. The cabinet can be fitted with vice and hinge equipment as required. When not required, the vice can easily be moved into the cabinet under the workbench. Housing Specification: sheet steel. Colour: according to colour chart. Type J J Fastening material Fastening material with 4 screws without pre-assembly Fastening material (4 screws) including pre-assembly Ordering examples Vice cabinet complete with housing J40 (height: 800), hinge unit and vice, including assembly. Gressel vice Vice type Jaw width Hinge unit Gressel AX Heuer-Klapp Gressel AX Heuer-Klapp-Lift Gressel AX Heuer-Klapp Gressel AX Heuer-Klapp-Lift Heuer vice Vice type Jaw width Hinge unit Heuer Heuer-Klapp Heuer Heuer-Klapp-Lift Heuer Heuer-Klapp Heuer Heuer-Klapp-Lift /2007; LISTA 2007

85 Hinge units Hinge unit for installation in vice cabinet. Gas springs provide weight counterbalance during lifting and lowering. Heuer-Klapp with safety lock, fixed height, including fastening material. Heuer-Klapp-Lift with safety lock, Type Maching vice Heuer-Klapp Gressel AX 100-1, Heuer Heuer-Klapp Gressel AX 125-1, Heuer Heuer-Klapp-Lift Gressel AX 100-1, Heuer Heuer-Klapp-Lift Gressel AX 125-1, Heuer * Adapter plate required for Gressel vice. height adjustable lift with 175 adjustment range, adjustment range, 360 rotation, with seal of German Trades Association. Including fastening material. Guarantee hinge units: 2 years. Jaw width * 100, 120 * 125, 140 * 100, 120 * 125, 140 Pre mounted hinge units Mounting of vice with hinge unit (Heuer-Klapp or Heuer-Klapp-Lift) in vice cabinet housing Adapter plates Adapter plate for Gressel vice to match hinge units of type «Heuer-Klapp» and «Heuer-Klapp-Lift», including fastening material Adapter plate for Gressel vice AX Adapter plate for Gressel vice AX /2007; LISTA

86 vices and height-adjustment units Gressel vice Forward opening vice with side construction for vertical gripping of round workpieces up to 4 inches diameter. For tubes of up to 6 inches diameter, horizontal grips at two levels with integrated cast iron or Prisma jaws. Specification: cast iron with two ribbed jaws, including fastening material. Colour: turquoise blue RAL Max. opening Jaw width Gressel AX Gressel AX Gressel AX Gressel height-adjustment units Lift 130-AX 100 for manual height adjustment (max. 200), 360 rotation. Specification: spheroidal cast iron, including fastening material. Positioning unit 150-AX with gas-filled compression damper, smooth height adjustment (max. 200), 360 rotation. Specification: Spheroidal cast iron, including fastening material. Both, colour: turquoise blue RAL Type Maching vice AX 100 AX (39.983) AX 125 AX (39.984) AX 160 AX (39.985) Vice base Specification: Multiplex 250x250 x50 predrilled, including fastening material. Maching vice Gressel AX Gressel AX Gressel AX Heuer Maching vice Heuer Gressel Lift Gressel Lift Heuer Lift 104 Heuer vice Forward opening vice for vertical gripping of round material, centrally adjustable guides, forged tube jaws and strong anvil, as well as fixed jaws. Double Prisma guide prevents dirt and damage. Specification: dropforged steel, surface-hardened jaws (fixed), including fastening material. Colour: blue haer-tone. Guarantee: 2 years. Type Max. opening Jaw width /2007; LISTA 2007

87 Heuer adjustable-height system Heuer-Lift with gas-filled compression damper, free height adjustment (max. 200), 360 rotation. Specification: drop-forged steel, including fastening material. Colour: blue haer-tone. Guarantee: 2 years. Type Maching vice Heuer-Lift (40.102) Heuer-Lift (40.103) Pre mounted vice Pre-assembly (holes), excluding fastening material 01/2007; LISTA

88 storage shelves Steam-treated beech veneer, waterproof glued multilayer (DIN ), bevelled edges, surface planed and oiled. Top resistant to spray water and dirt and largely resistant to oil and grease. Between workbench leg assemblies Specification: multiplex board, pre-drilled, including fastening material. Nominal depth 610 For workbench length Thickness * 2920 (2 x 1460) ** 2420 max per lm * Butt-jointed (2-pieces) ** Variabel Between workbench leg assembly and cabinet 27x36E Specification: multiplex board, pre-drilled, including fastening material, without mounting bracket. Nominal depth 610 For workbench length Thickness ** 2420 max per lm ** Variabel Mounting bracket Support bracket of sheet steel. Colour: light grey RAL 7035, including fastening material, for nominal depht 610 Foot rest Covered with ribbed PVC mat. Can be used under all workstations. Specification: sheet steel. Colour: light grey RAL7035. Ribbed mat, black /2007; LISTA 2007

89 27x36e drawer cabinets Cabinet housing Type Clear height B B B B B B B B313 * * unperforated cover Fastening material with 4 screws without pre-assembly Fastening material (4 screws) including pre-assembly For electronic locking systems and access control see seperate chapter. Drawers Standard model Front height Useful height Side / back height Carrying capacity kg EA EA VA EA VA EA VA EA VA EA VA EA VA EA VA EA;VA With safety catch on right Front height Useful height Side / back height Carrying capacity kg EA EA VA EA VA EA VA EA VA EA VA EA VA EA VA Useful width of drawers 459 = 27 units of 17 Useful depth of drawers 612 = 36 units of 17 EA = Normal extension: 85-90% extension possible, max. Carrying capacity with evenly distributed load VA = Total extension: 100% extension possible, the load-bearing capacity per drawer is max. 200kg. The operating manual must be observed for the loading and burden on drawers and drawer cabinets The front heights of all the drawers together should not exceed usable cabinet height. 01/2007; LISTA

90 Drawer safety catch on right For conversion: drawer safety catch on right Blank labels Blank labels, specially designed for use with the Lista Script labelling software, are available as A4 paper sheets, for use with all popular PC printers. Label size Number of A4 sheets / number of labels x 22 / 70 x 22 5 sheets = 50 / 150 labels Software on the internet: Pull-out shelf Installation height Useful width Useful depth Carrying capacity kg EA EA = Normal extension: 85-90% extension possible Adjustable shelf Installation height Useful width Useful depth Carrying capacity kg Hinged doors Hinged at right Front height Specification With cylinder lock * With bolt lock With cylinder lock * With bolt lock Hinged at left Front height Specification With cylinder lock * With cylinder lock * * Standard model is fitted with a central coon lock system Retainer top, raised edges on 3 sides With ribbed mat Ribbed mat separate Housing base Base Base /2007; LISTA 2007

91 27x36e sets of drawer partition material All sets without inscription material! Lista-Script see drawer partition material! Useful drawer dimension: width: 27E = 459, depth: 36E = 612 (Picture corresponds to 27x36E. 36x27E requires a different assembly.) For front height trough-shaped parts: 4 grooves 50 trough dividers: 4 grooves For front height trough-shaped parts: 4 grooves 20 trough dividers: 4 grooves 8 trough-shaped parts: 3 grooves 10 trough dividers: 3 grooves For front height trough-shaped parts: 3 grooves 20 trough dividers: 3 grooves 8 trough-shaped parts: 2 grooves 10 trough dividers: 2 grooves (Picture corresponds to 27x36E. 36x27E requires a different assembly.) For front height corrugated insert 1 plain partition: F50, 27E 20 holding pins: 27 1 allen key insert For front height corrugated insert 1 plain partition: F50, 27E For front height pair of angled supports 2 plain partitions: F75, 27E For front height , A B 20 holding pins: A = 27, B = 52 2 plain partitions: 36E 1 sliding tray For front height slotted partitions: F50, 36E 4 pairs of grooved inserts: 11 grooves 4 pairs of grooved inserts: 8 grooves 4 pairs of grooved inserts: 6 grooves 24 dividers: F50, 9E (Picture corresponds to 27x36E. 36x27E requires a different assembly.) For front height , plastic boxes: 150 x 75 6 plastic boxes: 150 x /2007; LISTA

92 (Picture corresponds to 27x36E. 36x27E requires a different assembly.) For front height plastic boxes: 75 x 75 8 plastic boxes: 150 x 75 4 plastic boxes: 150 x 150 For front height plastic boxes with centre divider: 75 x plastic boxes: 75 x 75 4 plastic boxes: 150 x 75 2 plastic boxes: 150 x 150 For front height , slotted partition: 36E 1 divider: 12E 1 divider: 15E For front height , slotted partitions: 36E 3 dividers: 9E For front height , slotted partitions: 36E 10 dividers: 9E For front height , slotted partitions: 36E 6 dividers: 6E 2 dividers: 9E For front height , slotted partitions: 36E 15 dividers: 5E 10 dividers: 6E For front height , slotted partitions: 27E 4 dividers: 6E 3 plain partitions: 24E For front height , plain partitions: 36E /2007; LISTA 2007

93 workbench superstructures ordering examples Note: These ordering examples only consist of the superstructure. The workbench must be ordered separately; refer to workbench ordering examples and individual components for workbench tops and workbench bases. Assembly workstation Workstation with perforated plate rear panel for use in heavy industry and machine shops. The necessary tools and materials must always be within easy reach for an efficient working procedure. Further accessories under individual components for workbench superstructures. Example 1, for workbench Support pillar Perforated rear panel Keyhole hooks, set 2 Needed components: 2 support pillars 2 rear panels 1 set with 18 holders Example 2, for workbench 1750 and Support pillar Perforated rear panel Keyhole hooks, set 3 Needed components: 3 support pillars 4 rear panels 1 set with 28 holders 01/2007; LISTA

94 Example 3, for workbench Support pillar Perforated rear panel Perforated rear panel Keyhole hooks, set 3 Needed components 3 support pillars 2 rear panels, rear panels, set with 28 holders Measuring and testing workstation Electronic workstation for workshops and laboratories with ideal storage possibilities for measuring and testing activities. Further accessories under individual components for workbench superstructures. Example 1, for workstation Support pillar Plain rear panel Adjustable shelf 1000 Needed components: 2 support pillars 1 rear panel 1 adjustable shelf Example 2, for workbench 1750 and Support pillar Plain rear panel Adjustable shelf 750 Needed components: 3 support pillars 2 rear panels 2 adjustable shelves Example 3, for workbench Support pillar Plain rear panel Plain rear panel Adjustable shelf Adjustable shelf 750 Needed components: 3 support pillars 1 rear panel, rear panel, adjustable shelf, adjustable shelf, /2007; LISTA 2007

95 Repair and service workstation Workstation for versatile use in industrial businesses and workshops. The ergonomic arrangement of the individual elements optimises progress of work. Equipment rail incl. brackets to receive spring motion and lighting. Further accessories under individual components for workbench superstructures. Example 1, for workbench Support pillar Perforated rear panel Adjustable shelf Container strip Red storage bins, size Blue storage bins, size Tool rail incl. support arms Keyhole hooks, set 2 Needed components: 2 support pillars 1 rear panel 1 adjustable shelf 2 container strips 9 storage containers, storage containers, tool rail incl. support arms 1 set with 18 holders Example 2, for workbench 1750 and Support pillar Perforated rear panel Adjustable shelf Container strip Red storage bins, size Blue storage bins, size Tool rail incl. support arms Keyhole hooks, set 3 Needed components: 3 support pillars 4 rear panels 2 adjustable shelves 2 container strips 7 storage containers, storage containers, tool rail incl. support arms 1 set with 28 holders 01/2007; LISTA

96 Example 3, for workbench Support pillar Perforated rear panel Adjustable shelf Container strip Red storage bins, size Blue storage bins, size Tool rail incl. support arms Keyhole hooks, set 3 Needed components: 3 support pillars 4 rear panels 2 adjustable shelves 2 container strips 9 storage containers, storage containers, tool rail incl. support arms 1 set with 28 holders /2007; LISTA 2007

97 support pillars Support pillars on bench tops Support pillars available in three heights and bolted (on site) directly to workbench top using fastening materials supplied. Specification: steel profile, holes at front and rear at 50 increments for mounting components, including fastening material. Colour: according to colour chart. Column height from workbench top Carrying capacity kg Nominal height Minimum top thickness 40 Minimum top length required A = N o of axis dimensions B(750/1000) + 90 Support pillars on worchbench leg Supports available in three heights. s 350 and 700 require one stabilising profile. Two stabilising profiles are required for 1400 height above worktop. Specification: steel, holes at front and rear in 50 spacing for simple insertion of modular add-on elements. With back-to-back workstations, the same supports act on both sides. Fixing materials included. Colour: according to colour chart. Column height from from workbench top Required stabilising profiles Stabilising profiles for basic units for add-on units Pre assembly per stabilising profile 01/2007; LISTA

98 rear panels Supports can be fitted with partial or full rear panels. All panels can be fitted into supports without screws. If no power conduit is fitted, fill-in profiles are used to close the remaining gap. Specification: sheet steel. Colour: according to colour chart. Plain rear panels Supports can be fitted with partial or full rear panels. All panels can be fitted into supports without screws. Specification: sheet steel. Colour: light grey, RAL Rear panels perforated Supports can be fitted with partial or full rear panels. All panels can be fitted into supports without screws. Perforated with round holes Ø 3.6 (for M4 x 10 Taptite self-cutting screws), spacing 19 or square holes 10 x 10, spacing 38. Specification: sheet steel. Colour: light grey, RAL Keyhole hooks for square holes To fit rear panels with square holes. Specification: sheet steel. Colour: alu grey. Keyhole hook sets Sets 1 and 2 suitable for minimal tool set, sets 3 and 4 suitable for normal tool sets. 1, 2 Set Quantity , 4 Tool holder with inclined hook end Diameter Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items /2007; LISTA 2007

99 Inclined hook for lock nut and socket key / 40 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Tool holder with vertical hook end Diameter Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Tool clamp Diameter Double tool holder with vertical hook end Diameter Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Tool clamp with large base plate Diameter Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Base plate, do-it-yourself mounting / assembly Small Large Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Magnetic holder Diameter Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. 01/2007; LISTA

100 Holder for storage bin (single compartments) For size 2 and 3 Pipe holder, also suitable for cable, etc. Diameter Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Pliers / Pincer holder Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Saw holder (used in pairs) For 4 saws Price indication per item. The minimum ordering quantity per article is 2 items. Further ordering quantities are only possible in increments of 2 items. Machine holder Diameter Cable holder Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Screwdriver holder For 6 parts For 12 parts Holder for storage bin (five compartments) For size 2 and For size 2 and /2007; LISTA 2007

101 Hexagonal socket holder, diameter Vertical wrench holder For 8 wrenches Drill holder / Hexagonal socket holder For 14 parts For 28 parts Nut retention recess holes Vertical wrench holder, for 10 wrenches / / Combination switch, 2-part Roll retainer holder Tool holder for round sockets Diameter Single Triple 01/2007; LISTA

102 Shelf Tool adapter for do-it-yourself drilling Top Plastic Steel shelf / Shelf Forms rack for DIN A4 Colour light-grey /2007; LISTA 2007

103 adjustable shelves Adjustable shelves, plain, with raised edge Shelves are fitted with one longitudinal raised edge. Adjustable shelves can be fitted with raised edge either to front or rear. The shelves are fitted with two brackets into supports, either horizontally or at an angle of 15. No fixing screws required. Specification: sheet steel. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth Including two brackets each. Max. load: 25kg Shelf height: strip Dividers For partitioning of the slotted shelves. Specification: sheet steel. Colour: light grey RAL7035. Dividers For shelf depths The spacing between the shelves is at least 25 more than the height of the separators. Slotted shelves with raised edge Slotted shelves are fitted with raised edge along the rear. Slot spacing 15 for partitioning using dividers. The adjustable shelves are fitted with two brackets horizontally into the supports. No fixing screws required. Specification: sheet steel. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth Including two brackets each. Max. load: 25kg Shelf height: strip Ribbed shelf mat Non-slip ribbed rubber mat for shelves. Colour: grey. Suitable for Adjustable shelf, with and without raised sides Nominal width Nominal depth Useful width Useful depth Material Rubber Rubber Rubber Rubber Small light resistance 01/2007; LISTA

104 container strips Container strips For containers of size 2, 3 and 4, inserts into supports, no fixing screws required. Specification: sheet steel. Colour: light grey RAL7035. For container size Quantity of containers , 3, , 7, , 3, , 9, /2007; LISTA 2007

105 storage containers, width and height refer to the external dimensions. The storage containers are breakproof, resistant to most acids and alkalis, temperature resistance -40 to +80 C. Specification: polyethylene (PE). Colours: red, blue, green, yellow. Size 2 Colour Capacity dm Red Blue Green Yellow Size 3 Colour Capacity dm Red Blue Green Yellow Size 4 Colour Capacity dm Red Blue Green Yellow Accessories For size 2 Number Transparent foil Labelling strips For size 3 Number Transparent foil Labelling strips For size 4 / 5 / 6 Number Transparent foil Labelling strips /2007; LISTA

106 Tool rails Horizontal support arms are inserted into the vertical supports. No securing screws required. They support the rail, which is fitted with a ball-bearing runner. The rail can be positioned at any workstation depth. Specification: steel, support arms and rail galvanised. Basic units Consisting of two support arms, and rail with runner. Equipment rails Carrying capacity kg Additional runner Additional runner, carrying capacity 2.5kg Additional tool rails For basic rail units. With mountings. Without runner. Equipment rails Pivoting tool rail (180 ) Pivoting through 180, fitted with ball-bearing runner, installed in the support. No securing screws required. Specification: steel, galvanised. Equipment rails Carrying capacity kg /2007; LISTA 2007

107 Lamp attachment rail Fits between tool rail support arms. Consists of lamp rail and fixing kit without horizontal support arms. Specification: steel. Colour: light-grey RAL7035. Useful width Rail length Main unit Main unit Main unit Main unit Main unit Horizontal support arm Fitted to the vertical supports. No fixing screws required. Specification: steel, galvanised /2007; LISTA

108 power conduits and accessories power conduits Power conduits either fit into the support pillars without screws, or screw to the bench top (holes are not pre-drilled). Power conduits are supplied with a choice of sockets: Type 13 (CH version), Schuko, France (Type F) or England (Type GB). All socket types are for 230V. Available with fault-current protective switches (personal protection switches). Each power conduit is supplied with a 3 metre connection cable. Specification: sheet steel, painted / IP-20. Colour: light grey RAL Guarantee power conduits: 2 years. With safety swtich Type CH Fittings Type Sockets 4 x 230V, with on / off switch CH Sockets 4 x 230V, with on / off switch CH Sockets 6 x 230V, with on / off switch CH Sockets 6 x 230V, with on / off switch CH Type Schuko Fittings Type Sockets 4 x 230V, with on / off switch Schuko Sockets 4 x 230V, with on / off switch Schuko Sockets 6 x 230V, with on / off switch Schuko Sockets 6 x 230V, with on / off switch Schuko Type F Fittings Type Sockets 4 x 230V, with on / off switch F Sockets 4 x 230V, with on / off switch F Sockets 6 x 230V, with on / off switch F Sockets 6 x 230V, with on / off switch F Type GB Fittings Type Sockets 4 x 230V, with on / off switch GB Sockets 4 x 230V, with on / off switch GB Sockets 6 x 230V, with on / off switch GB Sockets 6 x 230V, with on / off switch GB Attention: The power conduits connected over the jumper cable are not protected by the safety switch. It is possible on customer's request (note this on the supplier order) /2007; LISTA 2007

109 accessories Cable Picture Type Power cable CH Jumper cable CH/Schuko/F/GB Power cable Schuko Power cable GB Power cable F 1 2 Socket box For electrical power to the workstation. Holes for power supply are equipped with plastic plugs. Open front, fitted with the appropriate socket panel. Specification: sheet steel. Colour: light grey RAL Socket panels Various panels can be fitted to the socket box or to the support console, secured by four screws. Specification: sheet steel. Colour: black NCS S9000- N Panel for 4 sockets Panel for 3 sockets and 1 test terminal Panel for 3 sockets (Schuko) Duy cover, no holes, for installation by customer Supply excludes sockets or test terminals! Socket block Specification: Polyamide casing with 5 sockets and on/off switch. Incl. fixing material, with 3 m connecting cable. Mountable in horizontal wall cable conduit. Type CH Schuko F GB /2007; LISTA

110 hexagonal workbench accessories Accessories and energy conduits available on request. Multi-user workstations with large, hexagonal workbench top. Every work position includes a drawer cabinet substructure. Energy points are grouped in the central area. Specification on request. Workbench tops In two parts. Top type Top thickness Edge lenght Top lenght Top depth Multiplex Multiplex Fastening material with 4 screws without pre-assembly Fastening material (4 screws) including pre-assembly Accessories and energy conduits available on request. Cabinet box for socket box Multiplex, 20 thickness Cabinet tops, hexagonal Socket box Unwired, empty box. Corner dimension 958, edge length 6 x 450, 300 tall. Made of painted sheet steel. Colour: red RAL Fixing material included Socket box, hexagonal Equipment options for socket boxes Equipment options for socket boxes, hexagonal, fully wired, without socket box. Per workstation. Socket 230V, 16A Socket 380V, 16A red Type CH CH Schuko Schuko Electrical connections must only be made by a trained electrician. Other configurations and accessories on request. Compressed air connectors 16bar /2007; LISTA 2007

111 01/2007; LISTA

112 OVERVIEW Drawer systems NC storage and transport systems Workstations > Workstation systems > Workbenches > Modular workbenches > Stands and assembly trolleys > Chairs and stools Clothes lockers and material cabinets Shelf systems Dynamic storage technology Office systems ESD Electronic locking systems and access control systems Partition material /2007; LISTA 2007

113 Table of content Modular workbenches Introduction 114 Ordering examples 116 Component parts 129 Partition material 139 Superstructures /2007; LISTA

114 MODULAR WORKBENCHES Lista modular workbenches are hard-wearing, modern workplaces for workshops, production and the hobby sector in tried and trusted Lista quality Lista modular workbenches offer High stability by force-fitted pressed and screwed assemblies Stationary or mobile executions on castors or with a pallet base High housing carrying capacities up to 1000 kg Individual equipment possibilities with shelves,drawers and doors with 25:25 slotted increments Colour scheme by high-quality powdercoating according to customer wishes Versatile design possibilities with Lista dividing material Top dimensions in many lengths proved in practice of 700, 1250, 1500, 2000, 2500 or according to customer requirements Accessories / special solutions - Locking systems adapted to many customer requirements ranging from individual locking, including coon locking, to locking by master or collecti ve key systems - Drawers with individual locking - Workbench superstructures such as perforated walls, container strip mountings or installation conduits - Workbench tops in conductible execution or with resistance against specific thermal, chemical and mechanical stresses - ESD execution (conductible) THE STANDARD COLOURS For technical reasons, the printed colours shown here may differ from the original shades. capri blue RAL 5019 light blue RAL 5012 reseda green RAL 6011 ruby red RAL 3003 pure white RAL 9010 lightgrey RAL 7035 metallic grey NCS S 6502-B black NCS S 9000-N /2007; LISTA 2007

115 TOUT LE RAFFINEMENT EST DANS LE DETAIL Plateaux d établis Exécution solide et robuste en plaques de multiplex hêtre de 40 ou 50 d épaisseur ou plaques de hêtre massives de 50 d épaisseur. Livrable, en option avec rail d acier frontal ou avec protection en tôle d acier sur l ensemble de la surface ainsi qu avec des butées sur le côté et à l arrière. Plateaux d établi avec des dimensions spéciales ou d autres exécutions avec résistance aux contraintes chimiques, thermiques, mécaniques ou plateaux antistatiques sur demande. Tiroirs Les tiroirs sont guidés sur roulements à billes. Dimensions utiles 459 de largeur, 510. Livrable en 5 hauteurs différentes. Face avant poignée/étiquette autocollante et la possibilité d inscription avec le système Lista Script. Le verrouillage est effectué par le verrouillage central de l établi. Subdivision des tiroirs avec le matériel de subdivision de Lista. Charge : 70 kg en utilisation stationnaire, 30 kg en utilisation mobile. Livrable également coe exécution spéciale avec fermeture individuelle des tiroir (voir photo). Portes battantes Porte en tôle d acier avec poignée encastrée plastique. Livrable en 2 hauteurs (450 ou 600 ). En option montage à droite ou à gauche. Le verrouillage est effectué par le verrouillage central de l établi. Derrière lesportes, desrayons galvanisés d une capacité de charge de 50 kg. Etablis mobiles pour le transport par transpalette Pour l utilisation mobile avec chariot élévateur. Avec socle de chariot élévateur en tube carré soudé vissé en dessous. Livrable pour établis modulaires à une ou deux parties. Capacité de charge du socle de chariot élévateur 1000 kg. Roues Pour l utilisation mobile sur roues. Exécution standard avec deux roues fixes et deux roues pivotantes respectivement. Roues pivotantes avec blocage total. Avec bande d usure en caoutchouc plein. Livrable pour établis modulaires àune ou deux parties. Capacité de charge par roue 100 kg. D autres exécutions sur demande. Poignée coulissante Pour établi roulant. Ergonomique et stable. En tube d acier avec gaine en plastique. Longueur utile environ /2007; LISTA

116 ordering examples ordering examples standard stationary Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 1000 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. Carrying capacity: 70 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. 700 width Top type Thickness Multiplex Multiplex Without top Drawers: 150 ; 450 ; shelf 700 width Top type Thickness Multiplex Multiplex Without top Drawers: 100 ; 200 ; width Top type Thickness Multiplex Multiplex Without top Drawers: 600 ; 2 shelves 700 width Top type Thickness Multiplex Multiplex Without top Drawers: 4 x /2007; LISTA 2007

117 700 width Top type Thickness Multiplex Multiplex Without top Drawers: 150 ; 450 ; shelf 700 width Top type Thickness Multiplex Multiplex Without top Drawers: 2 x 75 ; 3 x / 1500 width Top type Thickness Multiplex Multiplex Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 2 shelves 1250 / 1500 width Top type Thickness Multiplex Multiplex Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 150 ; 450 ; shelf 1250 / 1500 width Top type Thickness Multiplex Multiplex Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 2 x 75 ; 450 ; shelf 01/2007; LISTA

118 1250 / 1500 width Top type Thickness Multiplex Multiplex Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 100 ; 2 x 150 ; / 1500 width Top type Thickness Multiplex Multiplex Multiplex Multiplex Without top Drawers on the left side: 100 ; 200 ; 300 Drawers on the right side: 100 ; 200 ; / 1500 width Top type Thickness Multiplex Multiplex Multiplex Multiplex Without top Drawers on the left side: 2 x 75 ; 3 x 150 Drawers on the right side: 150 ; 450 ; shelf 2000 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers in the Center: 2 shelves Drawers on the right side: 150 ; 450 ; shelf 2000 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers in the center: 2 x 75 ; 450 ; shelf Drawers on the right side: 150 ; 450 ; shelf /2007; LISTA 2007

119 2000 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 600 ; 2 shelves Drawers in the center: 4 x 75 ; 100 ; 200 Drawers on the right side: 600 ; 2 shelves 2000 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 2 x 100 ; 2 x 200 Drawers in the center: 2 shelves Drawers on the right side: 150 ; 450 ; shelf 2000 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers in the center: 100 ; 200 ; 300 Drawers on the right side: 150 ; 450 ; shelf 2000 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 4 x 75 ; 100 ; 200 Drawers in the center: 2 shelves Drawers on the right side: 2 x 75 ; 450 ; shelf 2000 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 100 ; 100 ; 150 ; 150 Drawers in the center: shelf; shelf Drawers on the right side: 150 ; 450 ; shelf 01/2007; LISTA

120 2000 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers in the center: 4 x 150 Drawers on the right side: 150 ; 450 ; shelf 2000 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 3 x 200 Drawers in the center: 2 shelves Drawers on the right side: 600 ; 2 shelves 2500 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 600 ; 2 shelves Drawers in the center: 3 x 100 ; 2 x 150 Drawers on the right side: 600 ; 2 shelvesdrawers in the center: 3 x 100 ; 2 x width Top type Thickness Multiplex Multiplex Without top Drawer on the left side: 2 x 75 ; 450 ; shelf Drawer in the center: 2 x 75 ; 100 ; 150 ; 200 Drawer on the right side: 2 x 75 ; 450 ; shelf Drawer in the center: 2 x 75 ; 100 ; 150 ; /2007; LISTA 2007

121 ordering examples standard stationary with set-back bottoms Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 1000 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. Carrying capacity: 70 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. Shelves offset to rear for better legroom, e.g. when working seated. Doors with plastic handles. Interior equipment according to description. Colours: workbench base: powder coated RAL 7035 light grey, Dividers: powder coated according to colour chart, adjustable shelves: galvanized width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 2 shelves offset to rear Drawers on the right side: 150 ; 450 ; shelf 1500 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 2 shelves offset to rear 2000 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers in the center: 2 shelves offset to rear Drawers on the right side: 150 ; 450 ; shelf 01/2007; LISTA

122 ordering examples standard as workshop desks Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 1000 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. Carrying capacity: 70 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. Without base in central area for better legroom, e.g. when working seated. Doors with plastic handles. Interior equipment according to description. Colours: workbench base: powder coated RAL 7035 light grey, Dividers: powder coated according to colour chart, adjustable shelves: galvanized width Top type Thickness Multiplex Multiplex 50 Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 150 ; 450 ; shelf 2000 width Top type Thickness Multiplex Multiplex 50 Drawers on the left side: 100 ; 200 ; 300 Drawers on the right side: 100 ; 200 ; /2007; LISTA 2007

123 ordering examples standard mobile with pallet Truck base Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 1000 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. Carrying capacity: 70 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. Without base in central area for better legroom, e.g. when working seated. Doors with plastic handles. Interior equipment according to description. Colours: workbench base: powder coated RAL 7035 light grey, Dividers: powder coated according to colour chart, adjustable shelves: galvanized. 700 width Top type Thickness Multiplex Multiplex 50 Drive in width at front / side: 498 / 550 Drawers: 2 x 75 ; 3 x width Top type Thickness Multiplex Multiplex 50 Drive in width at front / side: 1036 / 550 Drawers on the left side: 2 x 75 ; 100 ; 150 ; 200 Drawers on the right side: 600 ; 2 shelves 1250 width Top type Thickness Multiplex Multiplex 50 Drive in width at front / side: 1036 / 550 Drawers on the left side: 450 ; 150 ; shelf; shelf Drawers on the right side: shelf; shelf 01/2007; LISTA

124 ordering examples standard mobile Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 400 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. With front push handles in addition to 2 fixed and 2 swivel castors. Bearing surface in black solid rubber. Wheel diameter: 125. Swivel castors with double stop. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. With drawer catch for mobile use. Carrying capacity: 30 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. Doors with plastic handles. Interior equipment according to description. Colours: workbench base: powder coated RAL 7035 light grey, Dividers: powder coated according to colour chart, adjustable shelves: galvanized. 700 width Top type Thickness Multiplex Multiplex Without top Drawers: 150 ; 450 ; shelf 700 width Top type Thickness Multiplex Multiplex Without top Drawers: 100 ; 200 ; width Top type Thickness Multiplex Multiplex Without top Drawers: 2 x 75 ; 3 x width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 2 shelves /2007; LISTA 2007

125 1250 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 150 ; 450 ; shelf 1250 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 2 x 75 ; 450 ; shelf 1250 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 100 ; 2 x 150 ; width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 100 ; 200 ; 300 Drawers on the right side: 100 ; 200 ; width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 2 x 75 ; 3 x 150 Drawers on the right side: 150 ; 450 ; shelf 01/2007; LISTA

126 1250 width Top type Thickness Multiplex Multiplex Without top Drawers on the left side: 2 x 75 ; 100 ; 150 ; 200 Drawers on the right side: 600 ; 2 shelves /2007; LISTA 2007

127 ordering examples plus PLUS system workbenches differ from the STAND- ARD execution in the following details: The side walls of the PLUS workbench base are equipped at the factory with fixed integrated nuts. These allow (also subsequent) add on of cable drums or perforated plate side walls (accessories). Add on of lateral cable conduits only ex-works. The PLUS workbench bases are prepared to receive drawers with a separate locking device, i.e. the drawers are individually lockable (these drawers can only be supplied ex-works and are not subsequently retrofittable). Ordering examples PLUS stationary Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 1000 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Side walls prepared for adding on of PLUS accessories. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. Carrying capacity: 70 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. Doors with plastic handles Interior equipment according to description Colours: workbench base: powder coated RAL 7035 light grey, Dividers: powder coated according to colour chart, adjustable shelves: galvanized 1500 width Thickness Top type Multiplex 40 Drawers on the left side: 3 x 200 with individual locking Drawers on the right side: 450 ; 150 ; shelf Ordering examples PLUS mobile with pallet truck base Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 1000 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Side walls prepared for add on of PLUS accessories. With fixed integrated pallet truck base. Drive under height 110. Drive in widths according to table. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. With drawer catch for mobile use. Carrying capacity: 30 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. Doors with plastic handles. Interior equipment according to description. Colours: workbench base: powder coated RAL 7035 light grey, Dividers: powder coated according to colour chart, adjustable shelves: galvanized 700 width Top type Thickness Multiplex Multiplex 50 Drive in width at front / side: 498 / 550 Drawers: 2 x 75 ; 3 x /2007; LISTA

128 1250 width Top type Thickness Multiplex Multiplex 50 Drive in width at front / side: 1036 / 550 Drawers on the left side: 2 x 75 ; 100 ; 150 ; 200 Drawers on the right side: 600 ; 2 shelves 1250 width Top type Thickness Multiplex Multiplex 50 Drive in width at front / side: 1036 / 550 Drawers on the left side: 450 ; 150 ; 2 shelves Drawers on the right side: 2 shelves Ordering examples PLUS mobile Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 400 kg. Outside and inside walls with slotted holes for inserting the workbench accessories. With central lock and cylinder lock, individually locking. Side walls prepared for adding on of "PLUS accessory components. With front push hand in addition to 2 fixed and 2 swivel castors. Bearing surface in black solid rubber. Wheel diameter: 125. Swivel castors with double stop. Top execution according to tables. Drawers with labelling strips and the possibility of labelling using the Lista Script labelling system. With drawer safety catch for mobile use. Carrying capacity: 30 kg with evenly distributed load. Shelves in 25:25 slotted increments. Carrying capacity 50 kg evenly distributed load. Doors with plastic handles. Interior equipment according to description. Colours: workbench base powder coated RAL 7035 light grey, dividers: powder coated according to colour chart, adjustable shelves: galvanized 700 width Thickness Top type Multiplex 40 Drawers: 2 x 75 ; 3 x /2007; LISTA 2007

129 component parts workbench substructure standard and plus Workbench substructure in non-positive push-fit and screw connection. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Additionally for PLUS execution: interior increments prepared to receive PLUS installation sets and drawers with individual locking. Side walls prepared for addition of PLUS add on parts Stationary workbench substructures Carrying capacity 1000 kg. Colour: powder coated RAL 7035 light grey Clear height Execution part part part part part PLUS 1) part PLUS 1) part PLUS 1) part PLUS 1) 1) simultaneous installation of STANDARD and PLUS drawers possible. Workbench substructures with set-back bottom shelf left Carrying capacity 1000 kg. Left: 2 fixed, set-back bottom shelves for better legroom. Colour: powder coated RAL 7035 light grey, shelves galvanized Clear height Execution PLUS 1) 1) simultaneous installation of STANDARD and PLUS drawers possible. Workbench substructures with set-back bottom shelf right Carrying capacity 1000 kg. Right: 2 fixed, set-back bottom shelves for better legroom. Colour: powder coated RAL 7035 light grey, shelves galvanized Clear height Execution PLUS 1) 1) simultaneous installation of STANDARD and PLUS drawers possible. 01/2007; LISTA

130 Workbench substructures with set-back bottom shelf middle Carrying capacity 1000 kg. Middle: 2 fixed, set-back bottom shelves for better legroom. Colour: powder coated RAL 7035 light grey, shelves galvanized Clear height Execution PLUS 1) 1) simultaneous installation of STANDARD and PLUS drawers possible. Mobile Carrying capacity 400 kg. With front push handles in addition to 2 fixed and 2 swivel castors. Bearing surface in black solid rubber. Wheel diameter: 125. Swivel castors with double stop. Colour: powder coated RAL 7035 light grey Clear height Execution part part part PLUS 1) part PLUS 1) 1) simultaneous installation of STANDARD and PLUS drawers possible. mobile with pallet truck base Carrying capacity 1000 kg. With fixed integrated pallet truck base. Drive under height 110. Drive in widths at front 1-part / 2-part: 498 / 1036, at side: 550. Colour: powder coated RAL 7035 light grey Clear height Execution part part part PLUS 1) part PLUS 1) 1) simultaneous installation of STANDARD and PLUS drawers possible /2007; LISTA 2007

131 standard and plus installation kits Installation kits are inserted in the workbench bases at the factory (in blocks from left to right). A selection of installation kits with shelves, hinged doors and drawers are available in many combinations. Execution stationary for use in stationary bases execution mobile for use in mobile bases with a pallet truck base. The execution PLUS includes drawers with a drawer catch, is installed in the PLUS bases and can NOT be retrofitted in already existing workbenches. Notes:please indicate arrangement of the installation kits (from left to right). Without your details, we will always begin with the left. In selecting the installation kits, please observe the lock position of the selected base. Colours: powder coated according to colour chart, adjustable shelves galvanized. STANDARD and PLUS installation kits 2 shelves 1 hinged door, 2 shelves 1 drawer, 1 hinged door, 1 shelf Equipment: 1 hinged door 600, 2 shelves Equipment: 1 drawer 150, 1 hinged door 450, 1 shelf PLUS execution: drawer additionally with cylinder lock and 2 keys. Separately lockable. 2 shelves Stationary or mobile Stationary or mobile, right Stationary or mobile, left Stationary or mobile, right Stationary or mobile, left Stationary, right, PLUS Stationary, left, PLUS Mobile, right, PLUS Mobile, left, PLUS 2 drawers, 1 hinged door, 1 shelf 2 drawers 3 drawers Equipment: drawers 75, 1 hinged door 450, 1 shelf Equipment: 2 x 300 Equipment: 3 x 200 PLUS execution: each drawer additionally with a cylinder lock and 2 keys. Separately lockable Stationary, right Stationary, left Mobile, right Mobile, left Stationary Mobile Stationary Mobile Stationary, PLUS Mobile, PLUS 01/2007; LISTA

132 3 drawers 3 drawers 4 drawers Equipment: 2 x 150, 1 x 300 Equipment: 1 x 100, 1 x 200, 1 x 300 Equipment: 4 x 150 PLUS execution: each drawer additionally with a cylinder lock and 2 keys. Separately lockable Stationary Mobile Stationary Mobile Stationary Mobile Stationary, PLUS Mobile, PLUS 4 drawers 4 drawers 4 drawers Equipment: 1 x 100, 2 x 150, 1 x 200 Equipment: 2 x 100, 2 x 200 Equipment: 2 x 75, 1 x 150 m, 1 x Stationary Mobile Stationary Mobile Stationary Mobile 4 drawers 5 drawers 5 drawers Equipment: 3 x 100, 1 x 300 Equipment: 2 x 75, 3 x 150 Equipment: 3 x 100, 2 x Stationary Mobile Stationary Mobile Stationary Mobile /2007; LISTA 2007

133 5 drawers 5 drawers 75, 75, 75, 75, 300 Equipment: 2 x 75, 1 x 100, 1 x 150, 1 x Equipment: 4 x 100, 1 x 200 Equipment: 4 x 75, 1 x Stationary Mobile Stationary Mobile Stationary Mobile 6 drawers 6 drawers 6 drawers Equipment: 4 x 75, 2 x 150 Equipment: 2 x 75, 3 x 100, 1 x 150 Equipment:6 x Stationary Mobile Stationary Mobile Stationary Mobile 6 drawers 7 drawers 8 drawers Equipment: 4 x 75, 1 x 100, 1 x 200 Equipment: 4 x 75, 3 x 100 Equipment: 8 x Stationary Mobile Stationary Mobile Stationary Mobile 01/2007; LISTA

134 installation kits standard and plus Installation kits are inserted in the workbench bases at the factory (within the block from top to bottom in blocks from left to right). A selection of hinged doors, shelves and drawers is available. Execution stationary for use in stationary bases execution mobile for use in mobile bases or bases with a pallet truck base. The PLUS execution includes drawers with a drawer catch, is installed in the PLUS bases and can NOT be retrofitted in already existing workbenches. Notes:please indicate arrangement of the installation kits (within the block fro top to bottom in blocks from left to right). Without your details, we will always begin with the left. In selecting the installation kits, please observe the lock position of the selected base. Colours: powder coated according to colour chart, adjustable shelves galvanized. Hinged doors, STANDARD and PLUS Sheet steel hinged doors with vertical full-length handles, locked by central locking system on the inner panel. Doors can be installed to left or right. Colour: according to colour chart. Execution Doors installed on the right side Doors installed on the right side Doors installed on the left side Doors installed on the left side Shelves, STANDARD and PLUS Steel sheet shelf. Shelves adjustable with 25:25 slotted increments. Can be optionally used in the open compartment or behind hinged doors. Carrying capacity 50 kg, galvanized. Thickness Carrying capacity kg Drawers stationary, STANDARD and PLUS Sheet steel drawers with ball-bearing guides. Execution stationary for use in stationary bases. Front with full-width handle/labelling strip and the possibility of labelling with the Lista Script labelling system. Locking is performed by the central lock of the workbench. Drawer division with Lista dividing material. The PLUS execution includes drawers with individual locking incl. 2 separately locking keys, is installed in PLUS bases and can NOT be retrofitted in already existing workbenches. Colour: powder coated according to colour chart. Front height Useful height Side / back height Carrying capacity kg Type PLUS PLUS PLUS PLUS PLUS Useful width: 459 = 27 units of 17 Useful depth: 510 = 30 units of /2007; LISTA 2007

135 Drawers mobile Sheet steel drawers with ball-bearing guides. Execution mobile for use in mobile bases or bases with a pallet truck base. Front with full-width handle/labelling strip and the possibility of labelling with the Lista Script labelling system. Locking is performed by the central lock of the workbench. Drawer division with Lista dividing material. The PLUS execution includes drawers with individual locking incl. 2 separately locking keys, is installed in PLUS bases and can NOT be retrofitted in already existing workbenches. Colour: powder coated according to colour chart. Front height Useful height Side / back height Carrying capacity kg Type PLUS PLUS PLUS PLUS PLUS Useful width: 459 = 27 units of 17 Useful depth: 510 = 30 units of 17 01/2007; LISTA

136 workbench Tops Workbench tops. Standard execution optionally in beech Multiplex or beech solid wood tops. Optional with front steel edge protection or steel sheet covering for all system workbenches. Further executions with resistance against chemical, thermal and mechanical stresses or tops in conductible execution on request. Multiplex tops 40 / 50 thick Cross glued and impregnated from several layers of veneer. Optionally with angled steel edge protection or with sheet cover. Multiplex tops 40 / 50 thick Top length Top thickness Top depth Multiplex tops, 40 / 50 thick, with steel edge protection at front Angled steel edge protection, galvanized. Top length Top thickness Top depth Multiplex tops, 40 / 50 thick, with sheet cover Sheet cover, galvanized, 1 thick, with front bevel in top thickness. Top length Top thickness Top depth /2007; LISTA 2007

137 Beech tops 50 thick Workbench top in solid beech: solid wood top, glued wooden blocks, dovetailed, sanded, impregnated. Surface naturally coloured. Optionally with angled steel edge protection. Solid beech tops Top length Top thickness Top depth Solid beech tops, with steel edge protection at front Angled steel edge protection, galvanized. Top length Top thickness Top depth Retainer tops Retainer tops are used as rear or side protection against rolling off. 100 high, Top projection with top thickness 40 / 50 : 60 / 50, 10 thick. Cannot be used in conjunction with workbench bases (third level)! In Multiplex. Rear panel strips in Multiplex Side panel strips in Multiplex Applied optionally on the left or right (please state) /2007; LISTA

138 workbench add-ons plus For adding on to workbenches and "PLUS" workbench bases. Cable drum, lateral for PLUS workbenches Alternating current cable drum with holder. Can be optionally installed on the right or left. 25 m rubber lead HO7RNF 3 x 1.5 ² 250 V, 16 A, CE/GS and TÜV mark. Also for use in the open, protected against water projections. Holder on workbench RAL 7035 light grey Cable drum RAL 5009 azure blue Incl. screw fittings. Can also be retrofitted. Execution schuko sockets with flap Power conduit, lateral for PLUS stationary workbenches Lateral EURO type power conduit incl. fixing bracket for lateral, vertical attachment to the workbench (optionally 1 conduit base section in sheet steel, 1 thick, with cover rail. Colour: RAL 7035 light grey. right or left), 600 high. Complete installa- 1 conduit cover profile in PVC. Colour: RAL 7021 tion conduit, pre-wired and installed, workshop tested, black. according to the current regulations, VDE 0100, DIN VDE 0620/05.92 and DIN VDE 0632/04.91 BGV A2 1 set of conduit end pieces. Colour: RAL 7035 light grey. Cannot be retrofitted. (formerly VBG 4). Schuko Compressed air socket 10 bars Preferably for top length , 2000 or 2500 Perforated plate wall, lateral for PLUS workbenches Side add-on wall for system workbench, with field of holes 10 x 10 - Slotted increments 38:38 for perforated wall hooks, incl. screw fittings RAL 7035 light grey. Can also be retrofitted /2007; LISTA 2007

139 partition material ordering examples For front height trough-shaped parts 4-part 40 trough walls 4-part For front height boxes 75 x boxes 150 x 150 For front height trough-shaped parts 3-part 15 trough walls 3-part 6 trough-shaped parts 2-part 10 trough walls 2-part For front height boxes 75 x 75 8 boxes 150 x 75 3 boxes 150 x 150 For front height Slotted partitions 30E 8 dividers 6E 2 dividers 9E Important! Cannot be used for drawers with PLUS individual locking. For front height Slotted partitions 30E 6 dividers 9E 2 dividers 9E Important! Cannot be used for drawers with PLUS individual locking. 01/2007; LISTA

140 workbench superstructures component parts Support pillars on bench tops Support pillars packaging units: optionally 2 or 3 items. 915 high from table upper edge. Incl. fastening material. Attachment on the workbench top on site. (Top thickness at least 40 ). Execution: steel profile, perforated with a division of 50 for screwless installation of the superstructure parts. Colour: powder coated RAL 7035 light grey. Column height from bench surface for top length (preferably) / / Number of columns items Rear panels, perforated Rear panels can be installed without screws in the support pillars. With 4-edge perforation 10 x 10, slotted increments 38:38 for fitting with a perforated wall hook system. Nominal height: 450. Max. 2 items can be installed above one another in support pillars. In steel sheet. Colour: powder coated RAL 7035 light grey. Nominal height Nominal width for top length (preferably) _ _ Perforated plate hook systems: see INCREMENT PLAN FOR PERFORATED PLATES. Container strips Container strips can be installed without screws in the support pillars. With receptacles for equipping with storage bins. In steel sheet. Colour: powder coated RAL 7035 light grey. for top length (preferably) x 1000 = or 2 x 1250 = Storage bins Size 2 Colour Capacity dm Red Blue Green Yellow Size 3 Colour Capacity dm Red Blue Green Yellow /2007; LISTA 2007

141 Size 4 Colour Capacity dm Red Blue Green Yellow Accessories for size 2 Number Transparent foil Labelling strips Accessories for size 3 Number Transparent foil Labelling strips Accessories for size 4 / 5 / 6 Number Transparent foil Labelling strips Rear plates as protection against rolling out Rear plates can be installed without screws in the support pillars. They prevent objects from falling down at the back. In steel sheet. Colour: powder coated RAL 7035 light grey. for top length (preferably) x 1000 = or 2 x 1250 = /2007; LISTA

142 installation conduits Ordering examples Complete installation conduit for wall or bracket fitting. Fully wired and installed, factory-tested according to current regulations: VDE 0100, DIN VDE 0620/05.92 and DIN VDE 0632/04.91, BGV A2 (formerly VBG 4). 1 conduit sub-frame made of (galvanized) sheet steel, 1 thick, with top rail. Colour: light grey RAL conduit cover profile made of PVC. Colour: black RAL set of conduit end pieces. Colour: light grey RAL7035. Schuko sockets 230V, 16A CEEsockets 400V, 16A, 6h, red Compressed air connectors 10bar Fixing brackets Fixing brackets Incl. integrated shelf, 235 high, 150 deep. (For installation of 133 high installation conduits; can be screwed to the rear of the workbench top. Drilling holes for fixing the bracket already exist.) Incl. fastening material. Execution: steel sheet. Colour: light grey RAL Not for use with support pillar systems Hooks for support pillar system Support hooks for installation duct (PU = 2 items) for installation of the installation duct on the support column system. Incl. screw fixings for fastening the hooks to the installation conduct on site Colour RAL 7035 light grey Conduit component parts Installation conduit for fitting the housing units described below. Without conduit end pieces, housing units or cable. Intended for mounting on wall or securing brackets. Conduit Installation conduit for fitting the housing units described below. Without conduit end pieces, housing units or cable. Intended for mounting on wall or securing brackets. 1 conduit sub-frame made of (galvanized) sheet steel, 1 thick, with top rail. Colour: light grey RAL conduit cover profile made of plastic. Colour: black RAL conduit sub-frame made of (galvanized) sheet steel, 1 thick, with top rail. Colour: light grey RAL conduit cover profile made of plastic. Colour: black RAL /2007; LISTA 2007

143 Conduit end pieces per kit Galvanized steel sheet 1 thick, for closing conduit end. With coupling for earth conductor. 1 conduit end piece prepared with drillings for PG 13.5 and 16, to receive the mains lead cleat and a drilling for the earth cable. 1 conduit end piece, prepared with a drilling for push-fit nipple and a drilling for the earth cable. 1 set = 2 items. Colour: RAL light grey Conduit end pieces per kit Couplings, per pair For connecting the conduit joins when several conduits are installed next to each other. Execution: steel sheet, galvanized Couplings, per pair Cover frame for housing units Conduit frame, 2 part, black. Used to cover the respective housing units. For retrofitting Conduit equipment independent of voltage Housing unit with earthing contact socket Installed as a unit with plug connections, for supply on site of the mains and connection cable. Consisting of: housing unit with 2 earthing contact sockets with flap, incl. cover frame, 80. Colour: black Housing unit, housing length 210 (without connection cable) Housing unit for safety cutout Ready installed, for covering safety cutouts and FI protection switches Housing unit, length housing 338 Safety cutout Installed as a unit with a plug connection for on-site supply of the mains and connecting cable. Consisting of: housing unit with safety cutout incl. cover frame, 80. Colour: black Housing unit, 1 pole, B 16A, housing length 210 (without connection cable) Housing unit, 3 pole, B 16A, housing length 255 (without connection cable) FI protective switch Installed as a unit with a plug connection for on-site supply of the mains and connecting cable. Consisting of: housing unit with safety cutout incl. cover frame, 80. Colour: black Housing unit, 25 / 0,03A, 2 pole, housing length 210 (without cable) Housing unit, 25 / 0,03A, 4 pole, housing length 255 (without cable) 01/2007; LISTA

144 On/off switch Installed as a unit with a plug connection for on-site supply of the mains and connecting cable for workplace lights. Consisting of: housing with on/off switch and earthing-socket incl. cover frame, 80. Colour: black Housing unit without top flap.housing length 210 (without cable) Housing unit with top flap, length housing 210 (without cable) EMERGENCY STOP switch Installed as a unit with a plug connection for on-site supply of the mains and connecting cable for locking on to the on-site emergency stop device. Consisting of: housing unit with emergency stop switch, on red/yellow backing incl. cover frame, 80. Colour: black Housing unit, EMERGENCY STOP switch, manually locked, housing length 210 (without cable) Housing unit, EMERGENCY STOP switch, with padlock, housing length 210 (without cable) Compressed air socket Installed as a unit with compressed air connection 10 bar, single-hand coupling R 1 4 inches external thread (in brass). Consisting of: housing unit with 2 compressed air connections (2 single-hand couplings) at the front with 1 rapid-release coupling and 1 plug-in nipple (for connection to one another). 1 compressed air line, Ø 11 / 6.3 pre-installed with 1 rapid coupling and 1 insertion bush for line, LW 6. 1 frame 80, black Housing unit, housing length 230 (with coupling) Compressed air line Compressed air line LW 6, with insertion bush and mini line coupling in addition to hose clamps, for connection of compressed air housing units with series installations Conduit equipment 230V, 3-pole Connection cable 230V Initial mains cable, 3 x for mains connection. Execution GST 18/3, crimped bush. Equipped with plug on one side, 3-pole, Connected load of bus, free end (CEB = conductor end bush), system plug (Wieland). Colour: black /2007; LISTA 2007

145 Connection cable 230V Cable, 3 x for connecting current distributors and power strips, tables with one another or between current distributors and sockets. Execution: GST 18/3, plug bush crimped. Colour: black Current distributor (distributor block) 230V Distributor block for 1 input and 3 outputs, incl. fixing for standard profile. Used for distribution to the respective housing units. Colour: black Coupling, 230V For directly connecting housing units together. Possible replacement for connecting cable. Distance between housing units 78. Execution: GST 18/3, plug socket screwed. Colour: black VK-0 coupling Conduit equipment 400V, 5-pole Connection cable 400V Initial mains cable, 5 x for mains connection. Execution GST 18/5, crimped bush. Equipped with plug on one side, 5-pole, Connected load of bush, free end (CEB = conductor end bush), system plug (Wieland). Colour: black Connection cable 400V Cable, 5 x for connecting current distributors and power strips, tables with one another or between current distributors and sockets. Execution: GST 18/5, plug bush crimped. Colour: black /2007; LISTA

146 Current distributor (distributor block) 400V Distributor block for 1 input and 5 outputs, incl. fixing for standard profile. Used for distribution to the respective housing units. Colour: black Coupling, 400V For directly connecting housing units together. Possible replacement for connecting cable. Distance between housing units 78. Execution: GST 18/5, plug socket screwed. Colour: black VK-0 coupling Housing unit with EEC socket Installed as a unit with plug connections, for on-site supply of the mains and connecting cable. Consisting of: housing unit with EEC socket in straight execution, 16A / 400V, 6h, red. Incl. cover frame 80. Colour: black Housing unit /2007; LISTA 2007

147 01/2007; LISTA

148 OVERVIEW Drawer systems NC storage and transport systems Workstations > Workstation systems > Workbenches > Modular workbenches > Stands and assembly trolleys > Chairs and stools Clothes lockers and material cabinets Shelf systems Dynamic storage technology Office systems ESD Electronic locking systems and access control systems Partition material /2007; LISTA 2007

149 Table of content Stands and assembly trolleys Introduction 150 Ordering examples 152 Component parts 156 Storage containers /2007; LISTA

150 STANDS AND ASSEMBLY TROLLEYS Stands and assembly trolleys compliment the workstation system and can save time with locating items. This system of space saving stands and assembly trolleys isideal for transportation or temporary storage of parts or assemblies. Individual components can be combined into stands or trolleys to meet customer-specific requirements. Supplied as flat packs for quick and easy assembly. Lista,makingworkspace work. THE STANDARD COLOURS For technical reasons, the printed colours shown here may differ from the original shades. capri blue RAL 5019 light blue RAL 5012 reseda green RAL 6011 ruby red RAL 3003 pure white RAL 9010 lightgrey RAL 7035 metallic grey NCS S 6502-B black NCS S 9000-N /2007; LISTA 2007

151 DIMENSIONS AND CARRYING CAPACITIES Nominal width A B C D E Specification Assembly trolley single-sided double-sided Stand single-sided double-sided Pillar spacing F = 23 x 50 T ragfähigkeiten Max. carrying capacity Loading Position kg Per assembly unit with evenly distributed load with evenly distributed load Per holding rail 3 15 with evenly distributed load Per adjustable shelf 4 25 with evenly distributed load Per adjustable shelf 5 50 with evenly distributed load Per storage shelf 6 50 with evenly distributed load 01/2007; LISTA

152 stands and assembly Trolleys ordering examples,single-sided 3 hinged shelves Nominal width Equipment: 2 castors 2 castors with brake 3 hinged shelves 430 deep, each with a carrying capacity of 50kg Max. assembly trolley load 250kg. 4 adjustable shelves Nominal width With securing bracket With securing bracket With raised edge With raised edge Equipment: 2 castors 2 castors with brake 4 hinged shelves 350 deep, each with a carrying capacity of 25kg 4 ribbed mats Max. assembly trolley load 250kg. 5 container strips, 2 hinged shelves Nominal width Securing bracket Without Without With With Equipment: 2 castors 2 castors with brake 5 container strips, carrying capacity of 15kg 14/ 8 storage containers size 2, red * 14/18 storage containers size 3, yellow * 10/12 storagecontainers size 4, blue * 2 hinged shelves, each with a carrying capacity of 50kg Max. assembly trolley load 250kg. * Number of storage containers on nominal width 750/ /2007; LISTA 2007

153 4 container strips, 1 shelf per type Nominal width Securing bracket Without Without With With Equipment: 2 castors 2 castors with brake 4 container strips, carrying capacity of 15kg 14/18 storagecontainers size 2, rot * 21/27 storage containers size 3, gelb * 1 adjustable shelf 350 deep, with raised edge 1 hinged shelf, carrying capacity 50kg 1 torage shelf 3 ribbed mats Max. assembly trolley load 250kg. * Number of storage containers on nominal width 750 / /2007; LISTA

154 ordering examples,double-sided 8 adjustable shelves Nominal width With securing bracket With securing bracket With raised edge With raised edge Equipment: 2 castors 2 castors with brake 8 adjustable shelves 350 deep, each with a carrying capacity of 50kg 8 ribbed mats Max. assembly trolley load 250kg. 10 container strips, 4adjustable shelves Nominal width Securing bracket Without Without With With Equipment: 2 castors 2 castors with brake 10 container strips, each with a carrying capacity of 15kg 28/36 storage containers size 2, red * 28/36 storage containers size 3, yellow * 20/24 storage containers size 4, blue * 4 adjustable shelves 350 deep, with raised edge, each with a carrying capacity of 50kg 4 ribbed mats Max. assembly trolley load 250kg. * Number of storage containers on nominal 750/ container strips Nominal width Securing bracket Without Without With With Equipment: 2 castors 2 castors with brake 18 container strips, each with a carrying capacity of15kg 56/72 storage containers size 2, red * 56/72 storage containers size 3, yellow * 30/36 storage containers size 4, blue * Max. assembly trolley load 250kg. * Number of storage containers on nominal 750/ /2007; LISTA 2007

155 6 adjustable shelves Nominal width Equipment: 4 adjustable feet 6 adjustable shelves 350 deep, with raised edge, each with a carrying capacity of 25kg Max. assembly trolley load 250kg. 01/2007; LISTA

156 component parts Assembly trolley Assembly trolleys are single- or double-sided. Supports allow installation of hinged or adjustable shelves and holding rails without the need for screws. Trolleys are equipped with 4 castors, 2 of which have brakes. Specification: steel frames and supports, holes at front and rear at 50 increments. Colour: according to colour chart. Castor housing of galvanized and chromated sheet steel. Rubber castors. Rubber wheels in grey. Nominal width Nominal height With 4 castors, 2 with brakes. Wheel diameter 100. Max. carrying capacity 250kg Stands Stands are single- or double-sided. The support pillars allow fitting of hinged or adjustable shelves and holding rails without the need for screws. Stands are equipped with 4 adjustable feet. Specification: steel frames and supports, holes at front and rear at 50 increments. Colour: according to colour chart. Adjustable feet in black. Nominal width Nominal height With 4 adjustable feet. Max. carrying capacity 250kg Container strips For containers of size 2, 3 and 4, inserts into supports, no fixing screws required. Specification: sheet steel. Colour: light grey RAL7035. For container size Quantity of containers , 3, , 7, , 3, , 9, 6 Security bracket For holding rail. Can be fitted later. Fixed to the rail to prevent storage containers dislodging during transport when the floor is uneven. Includes fixing materials. Specification: sheet steel. Colour: according to colour card. Nominal width Nominal height /2007; LISTA 2007

157 Fixed container strips Rail complete with securing bracket. Specification: sheet steel. Colour: light grey RAL7035. Nominal width Nominal height Adjustable shelves, plain, with raised edge Shelves are fitted with one longitudinal raised edge. Adjustable shelves can be fitted with raised edge either to front or rear. The shelves are fitted with two brackets into supports, either horizontally or at an angle of 15. No fixing screws required. Specification: sheet steel. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth Including two brackets each. Max. load: 25kg Shelf height: strip Adjustable shelves plain with raised sides Raised sides prevent items dislodging during transport when the floor is uneven. Adjustable shelves can be fitted with raised side either on the left or right side. With the two adjustable shelf brackets supplied, the shelves are fitted either horizontally or at an angle of 15 in the supports, without the need for screws. Specification: sheet steel. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth Each shelf includes two adjustable shelf brackets. Shelf height: raised edge Carrying capacity: 25kg Hinged shelves Using the two brackets supplied, hinged shelves are installed in the frame without the need for screws, and are infinitely adjustable between the horizontal and 30. The raised edge at the front and rear stops items dislodging. Specification: sheet steel with clamping lever. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth Shelf height: raised edge Carrying capacity: 50kg 01/2007; LISTA

158 Storage shelves The storage shelf is installed between the stand support pillars. Specification: sheet steel. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth single-sided double-sided single-sided double-sided Carrying capacity: 50kg Ribbed shelf mat Non-slip ribbed rubber mat for shelves. Colour: grey. Suitable for Adjustable shelf, with and without raised sides Nominal width Nominal depth Useful width Useful depth Material Rubber Rubber Rubber Rubber Suitable for hinged shelf Nominal width Nominal depth Useful width Useful depth Material Rubber Rubber Small light resistance Ribbed shelf mat for storage shelf Nominal width Nominal depth Useful width Useful depth Handle The handle is mounted at the side of the vertical stand support pillar, and includes fixing materials. Specification: galvanized sheet steel. Diameter /2007; LISTA 2007

159 storage containers, width and height refer to the external dimensions. The storage containers are breakproof, resistant to most acids and alkalis, temperature resistance -40 to +80 C. Specification: polyethylene (PE). Colours: red, blue, green, yellow. Size 2 Colour Capacity dm Red Blue Green Yellow Size 3 Colour Capacity dm Red Blue Green Yellow Size 4 Colour Capacity dm Red Blue Green Yellow Size 5 Colour Capacity dm Red Blue Green Yellow Size 6 Colour Capacity dm Red * Blue * Green * Yellow * * These storage bins do only fit diagonally in container cabinets. Accessories For size 2 Number Transparent foil Labelling strips /2007; LISTA

160 For size 3 Number Transparent foil Labelling strips For size 4 / 5 / 6 Number Transparent foil Labelling strips /2007; LISTA 2007

161 01/2007; LISTA

162 OVERVIEW Drawer systems NC storage and transport systems Workstations > Workstation systems > Workbenches > Modular workbenches > Stands and assembly trolleys > Chairs and stools Clothes lockers and material cabinets Shelf systems Dynamic storage technology Office systems ESD Electronic locking systems and access control systems Partition material /2007; LISTA 2007

163 Table of content Chairs and stools Introduction 164 Chairs and stools /2007; LISTA

164 CHAIRS AND STOOLS All models take ergonomic considerations in to account. They have all been designed to take advantage of the latest physiological standards, and have been tested many times over. They can beadjusted tomatch every physique and working position. These chairs are exceptionally robust and of rugged constructionfor hard use. Lista,making workspace work /2007; LISTA 2007

165 chairs and stools The small universal Swivel stool with super soft seat of hard-wearing, selfskinned foam or wood. Liftomatik height adjustment. 5-prong plastic base. Specification: wood: beech. With Glides Adjustment of seat height Specification Seat With glides Black With glides Wood With Castors Adjustment of seat height Specification Seat With castors Black With castors Wood The big universal Seat of hard-wearing, selfskinned foam or wood. Very stable workshop stool with steel base ring. Liftomatik height adjustment. Specification: wood: beech. Adjustment of seat height Specification Seat With glides Black With glides Wood The small Seat and back made of hard-wearing, selfskinning foam or wood. Smooth seat height adjustment with gas spring. 5-prong steel base with plastic covering. Specification: wood: beech. With Glides Adjustment of seat height Specification Seat With glides Black With glides Wood 01/2007; LISTA

166 With Castors Adjustment of seat height Specification Seat With castors Black With castors Wood The medium Ergonomically-designed seat and back made of hardwearing, selfskinning foam or wood. With flexible to and fro back support, height adjustable with chrome stop bar and multi-plated incline adjustment device for individual preference. Liftomatik height adjustment. 5-prong base with two footrests. Specification: wood: beech. Adjustment of seat height Specification Seat With glides Blach With glides Wood The large Ergonomically-designed seat and back made of hardwearing, selfskinned foam or wood. Liftomatik height adjustment. Seat and height adjustment asynchronous. With flexible to and fro back support, adjustable in height. Extremely stable base with three footrests. Specification wood: beech. Adjustment of seat height Specification Seat With glides Back With glides Wood The top Swivel chair with gas spring height adjustment, back horizontally and vertically adjustable. Aluminium die cast 5-prong base. Specification: wood: beech. Adjustment of seat height Specification With glides, backrest and circular footrest /2007; LISTA 2007

167 The standing chair Very stable standing-height chair, lockable seat height adjustment. Seat made of hard-wearing, integral skin foam. Set tilt adjustable by 15. Seat swivels to either side, with automatic centre return. Adjustment of seat height Specification Black Chromium plated Stainless steel The comfortable chair Soft textile upholstery made of robust covering material. Seat height adjustment with gas spring lift mechanism. Gradual back and height adjustment. Colours: Chair base: black RAL Upholstery: anthracite / other colours on request. Adjustment of seat height Specification With castors The comfortable, electrically conductive chair (ESD) A conductive, upholstered chair specially developed for the electronics industry. Tested according to IEC Colour: Chair base: black RAL Upholstery: anthracite. Adjustment of seat height Specification With castors 01/2007; LISTA

168 /2007; LISTA 2007