ASSEMBLY SYSTEMS. Assembly systems. 387
|
|
- Blaze Hamilton
- 6 years ago
- Views:
Transcription
1 Assembly systems
2 Assembly systems ASSEMBLY SYSTEMS Series Size Page Assembly systems Pillar profile modular system Pillars Ø 20 mm 390 Pillars Ø 35 mm 394 Pillars Ø 55 mm
3 Assembly systems Sizes Clamping elements max. 9 Pillar length max mm Shape and positional tolerances 0.05 Application example Versatile pillar profile modular system, Ø 35 mm, with horizontal and vertical mounting plates which can be used for the GEMOTEC system or for other assemblies 1 Double socket, SOD Single base support, SOE Hollow pillar, SLH Double mounting plate, horizontal, APDH Set collar, STR Cross connector, KVB Single mounting plate, vertical, APEV Mounting plate, MPL Single mounting plate, horizontal, APEH Double mounting plate, vertical, APDV
4 Assembly systems Assembly system Pillars, hard-chromium plated, ground Area of application For the assembly of GEMOTEC modular system units as well as for structures of all types in clean or contaminated environments. The many clamping elements permit numerous combinations of pillars and mounting plates. Advantages your benefits Steel pillars For a high degree of rigidity and low-vibration movements Precise shape and positional tolerances For high accuracy even for long pillars Several pillar diameters For minimum interfering contours of the entire system at optimal rigidity Many clamping elements Standardized, with a large variety of combinations possible Assembly and centering bore holes Reproducible, precisely angled assembly of the elements General information about the series Pillars Steel, hard-chromium plated, ground Sockets, mounting plates Aluminum, anodized Scope of delivery Including attachment screws Warranty 24 months For production reasons, the colors may vary from those shown in the catalog
5 Pillar diameter, 20 mm Single base support, SOE 020 Double socket, SOD 020 SOE Aluminum SOD Aluminum Single mounting plate, horizontal, APEH 020 Double mounting plate, horizontal, APDH 020 APEH Aluminum APDH Aluminum 390
6 Pillar diameter, 20 mm Single mounting plate, vertical, APEV 020 Double mounting plate, vertical, APDV 020 Missing dimensions: see APEV 020 APEV Aluminum APDV Aluminum Set collar, STR 020 Cross connector, KVB 020 STR Aluminum KVB Aluminum 391
7 Pillar diameter, 20 mm Hollow pillar, SLH 020 L [mm] SLH Steel 100 SLH Steel 110 SLH Steel 120 SLH Steel 130 SLH Steel 140 SLH Steel 150 SLH Steel 160 SLH Steel 170 SLH Steel 180 SLH Steel 190 SLH Steel 200 SLH Steel 210 SLH Steel 220 SLH Steel 230 SLH Steel 240 SLH Steel 250 SLH Steel 260 SLH Steel 270 SLH Steel 280 SLH Steel 290 SLH Steel 300 SLH Steel 310 SLH Steel 320 SLH Steel 330 SLH Steel 340 SLH Steel 350 SLH Steel 360 SLH Steel 370 SLH Steel 380 SLH Steel 390 SLH Steel 400 SLH Steel 410 SLH Steel 420 SLH Steel 430 SLH Steel 440 SLH Steel 450 SLH Steel 460 L [mm] SLH Steel 470 SLH Steel 480 SLH Steel 490 SLH Steel
8 Pillar diameter, 20 mm Mounting plate, MPL 020 MPL Aluminum 393
9 Pillar diameter, 35 mm Single base support, SOE 035 Double socket, SOD 035 SOE Aluminum SOD Aluminum Single mounting plate, horizontal, APEH 035 Double mounting plate, horizontal, APDH 035 APEH Aluminum APDH Aluminum 394
10 Pillar diameter, 35 mm Single mounting plate, vertical, APEV 035 Double mounting plate, vertical, APDV 035 Missing dimensions: see APEV 035 APEV Aluminum APDV Aluminum Set collar, STR 035 Cross connector, KVB 035 STR Aluminum KVB Aluminum 395
11 Pillar diameter, 35 mm Hollow pillar, SLH 035 L [mm] SLH Steel 100 SLH Steel 110 SLH Steel 120 SLH Steel 130 SLH Steel 140 SLH Steel 150 SLH Steel 160 SLH Steel 170 SLH Steel 180 SLH Steel 190 SLH Steel 200 SLH Steel 210 SLH Steel 220 SLH Steel 230 SLH Steel 240 SLH Steel 250 SLH Steel 260 SLH Steel 270 SLH Steel 280 SLH Steel 290 SLH Steel 300 SLH Steel 310 SLH Steel 320 SLH Steel 330 SLH Steel 340 SLH Steel 350 SLH Steel 360 SLH Steel 370 SLH Steel 380 SLH Steel 390 SLH Steel 400 SLH Steel 410 SLH Steel 420 SLH Steel 430 SLH Steel 440 SLH Steel 450 SLH Steel 460 L [mm] SLH Steel 470 SLH Steel 480 SLH Steel 490 SLH Steel 500 SLH Steel 510 SLH Steel 520 SLH Steel 530 SLH Steel 540 SLH Steel 550 SLH Steel 560 SLH Steel 570 SLH Steel 580 SLH Steel 590 SLH Steel 600 SLH Steel 610 SLH Steel 620 SLH Steel 630 SLH Steel 640 SLH Steel 650 SLH Steel 660 SLH Steel 670 SLH Steel 680 SLH Steel 690 SLH Steel 700 SLH Steel 710 SLH Steel 720 SLH Steel 730 SLH Steel 740 SLH Steel 750 SLH Steel 760 SLH Steel 770 SLH Steel 780 SLH Steel 790 SLH Steel 800 SLH Steel 810 SLH Steel 820 SLH Steel
12 Pillar diameter, 35 mm Mounting plate, MPL 035 L [mm] SLH Steel 840 SLH Steel 850 SLH Steel 860 SLH Steel 870 SLH Steel 880 SLH Steel 890 SLH Steel 900 SLH Steel 910 SLH Steel 920 SLH Steel 930 SLH Steel 940 SLH Steel 950 SLH Steel 960 SLH Steel 970 SLH Steel 980 SLH Steel 990 SLH Steel 1000 MPL Aluminum 397
13 Pillar diameter, 55 mm Single base support, SOE 055 Double socket, SOD 055 SOE Aluminum SOD Aluminum Single mounting plate, horizontal, APEH 085 Double mounting plate, horizontal, APDH 085 APEH Aluminum APDH Aluminum 398
14 Pillar diameter, 55 mm Single mounting plate, vertical, APEV 085 Double mounting plate, vertical, APDV 085 Missing dimensions: see APEV 035 APEV Aluminum APDV Aluminum Set collar, STR 055 Cross connector, KVB 075 STR Aluminum KVB Aluminum 399
15 Pillar diameter, 55 mm Hollow pillar, SLH 055 L [mm] SLH Steel 150 SLH Steel 160 SLH Steel 170 SLH Steel 180 SLH Steel 190 SLH Steel 200 SLH Steel 210 SLH Steel 220 SLH Steel 230 SLH Steel 240 SLH Steel 250 SLH Steel 260 SLH Steel 270 SLH Steel 280 SLH Steel 290 SLH Steel 300 SLH Steel 310 SLH Steel 320 SLH Steel 330 SLH Steel 340 SLH Steel 350 SLH Steel 360 SLH Steel 370 SLH Steel 380 SLH Steel 390 SLH Steel 400 SLH Steel 410 SLH Steel 420 SLH Steel 430 SLH Steel 440 SLH Steel 450 SLH Steel 460 SLH Steel 470 SLH Steel 480 SLH Steel 490 SLH Steel 500 SLH Steel 510 L [mm] SLH Steel 520 SLH Steel 530 SLH Steel 540 SLH Steel 550 SLH Steel 560 SLH Steel 570 SLH Steel 580 SLH Steel 590 SLH Steel 600 SLH Steel 610 SLH Steel 620 SLH Steel 630 SLH Steel 640 SLH Steel 650 SLH Steel 660 SLH Steel 670 SLH Steel 680 SLH Steel 690 SLH Steel 700 SLH Steel 710 SLH Steel 720 SLH Steel 730 SLH Steel 740 SLH Steel 750 SLH Steel 760 SLH Steel 770 SLH Steel 780 SLH Steel 790 SLH Steel 800 SLH Steel 810 SLH Steel 820 SLH Steel 830 SLH Steel 840 SLH Steel 850 SLH Steel 860 SLH Steel 870 SLH Steel
16 Pillar diameter, 55 mm Mounting plate, MPL 250 L [mm] SLH Steel 890 SLH Steel 900 SLH Steel 910 SLH Steel 920 SLH Steel 930 SLH Steel 940 SLH Steel 950 SLH Steel 960 SLH Steel 970 SLH Steel 980 SLH Steel 990 SLH Steel 1000 MPL Aluminum 401
Precise. Modular. Compact. CLM Compact Slides
CLM Precise. Modular. Compact. CLM Compact Slides Optimized length, with pneumatic drive and pre-loaded crossed roller bearings, free from play. Field of Application For use in assembly automation; e.g.
More informationProduct Information. Compact linear module ELS
Product Information ELS ELS Modular. Compact. Precise. ELS compact linear module with spindle drive and profiled rail guide Field of application For use in clean and slightly polluted environments. Simple
More informationFlexible. Fast. Reliable. ELM Compact Linear Module
ELM Flexible. Fast. Reliable. ELM Compact Linear Module With linear direct drive and profiled rail guide with integrated measuring system for position detection and temperature monitoring. Field of Application
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationPortal modules.
Portal modules www.comoso.com www.comoso.com Portal modules PORTAL MODULES Series Size Page Portal modules PMP 114 PMP 16 118 PMP 25 124 EPM 130 EPM 37 138 EPM 48 146 The SCHUNK program offers linear technology
More informationKLM. Application example. Linear modules Pneumatic Stroke module. 1 Single base support, SOE Adapter plate, APL 121
KLM www.comoso.com Sizes 25.. 100 Mass 0.5 kg.. 5.18 kg Driving force 50 N.. 294 N Stroke 25 mm.. 225 mm Repeat accuracy ± 0.01 mm.. ± 0.015 mm Application example 4 5 3 3 6 7 2 2 8 1 1 Pneumatic two-axis
More informationFlexible. Modular. Compact. Beta Universal Linear Module
Beta Flexible. Modular. Compact. Beta Universal Linear Module Universal linear module with optional toothed belt or spindle drive and various guiding options. Field of Application Universal linear module
More informationMODULAR ASSEMBLY AUTOMATION
MODULAR ASSEMBLY AUTOMATION A u t o m a t i o n Discover new horizons SCHUNK AUTOMATION anticipates trends in technology and customer needs and implements them in unique products, solutions and services.
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationProduct Information. Rotary gripping module with angular gripper RW
Product Information RW RW Flexible. Modular. Compact. Gripper Swivel Module RW Rotary gripper combination, consisting of a rotary module and a 2-finger angular gripper Field of application Gripping and
More informationEJP SERIES Right-angle Worm
EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals
More informationSRH. Application example. Pneumatic Swivel Heads Universal Swivel Head. Weight 2.1 kg kg. Axial force 800 N..
SRH www.comoso.com Sizes 20.. 60 Weight 2.1 kg.. 21.2 kg Axial force 800 N.. 9000 N Torque 3.0 Nm.. 69.9 Nm Bending moment 10.4 Nm.. 340 Nm Application example Swivel head for the rapid loading and unloading
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationFUS. Application example. Compensation Insertion Units. Compensation path XY ± 2.2 mm. Sizes Compensation bend 1
FUS www.comoso.com Sizes 01-30.. 400 Payload up to 20 kg Compensation path XY ± 2.2 mm Compensation bend 1 Application example Inserting a bolt into a bore FUS-113B Insertion Unit PZN-plus 80 2-Finger
More information22mm. Compact Guide Cylinder (Basic type) New. Up to. Series MGP. Weight reduced!
1-161 Compact Guide Cylinder (Basic type) ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Up to 17% Weight reduced! New Weight reduced by up to 17% with a shorter guide rod and thinner plate Guide rod
More informationModular. Compact. Loadable. HLM Stroke Module
HLM Modular. Compact. Loadable. HLM Stroke Module Linear module with optimized overall length, pneumatic drive and scope-free pretensioned junction rollers. Field of Application For lifting of workpieces
More informationintroduction WARRAnTY / DiScLAiMeR OF unstated WARRAnTieS / LiMiTATiOn OF LiABiLiTY Warranty. Disclaimer of unstated warranties.
BeLLOWS couplings Introduction Ruland Manufacturing Co., Inc. has been supplying carefully made products since 1937. We have manufactured everything from bicycle pumps to high pressure valves, including
More informationCONVENTIONAL WORKHOLDING
simple. gripping. future. CONVENTIONAL WORKHOLDING 1 Avanti Quick Jaw Exchange System 14 Avanti 46 16 Avanti 18 Avanti 11 Profilo Contour Jaw System 112 Profilo 113 Profilo 114 Profilo Dual clamping vice
More informationRE / Connection Elements for Compact Modules. The Drive & Control Company
RE 82 618/2003-01 Connection Elements for Compact Modules The Drive & Control Company Connection Elements Connection elements for compact modules allow the fast and easy adaptation to profiles and supports
More informationAGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
More informationLEG. Application example. Electrical 2-Finger Parallel Gripper Long-stroke Gripper. Gripping force 1050 N 1500 N. Weight 9 kg 11.
LEG www.comoso.com Size 760 Weight 9 kg 11.6 kg Gripping force 1050 N 1500 N Stroke per finger 281 mm Workpiece weight 15.75 kg 22.5 kg Application example Gripping unit for top loading and palettizing
More informationSKE. Application example. Pneumatic Swivel Heads Universal Swivel Head. Torque 0.4 Nm Nm. Sizes Weight 0.13 kg.. 1.
SKE Sizes 18.. 55 Weight 0.13 kg.. 1.95 kg Axial force 140 N.. 2560 N Torque 0.4 Nm.. 9.0 Nm Bending moment 7.0 Nm.. 128 Nm Application example Robot gripper module for the removal and loading of a variety
More informationThe PReMIeRe of The year
The PReMIeRe of The year SRU-plus pneumatic universal rotary actuator SRU-plus Pneumatic universal rotary actuator SRU-plus one of the most powerful rotary actuator on the market. a consistent modular
More informationSCHMIDT Toggle Presses
SCHMIDT Toggle Presses The high force at the end of stroke, just where it is important Do you need a high force at the end of stroke for materialtransforming processes? Then, SCHMIDT Toggle Presses are
More informationFlexible. Cost-Effective. Modular. LPE Line Gantry
Flexible. Cost-Effective. Modular. LPE Line Gantry Line gantry with a horizontal, pneumatic belt drive axis, and a vertical, electric spindle axis. Field of Application Universal application for two dimensional
More informationProduct Information. Long-stroke gripper PHL 32
Product Information PHL 32 PHL Flexible. Precise. Powerful. PHL long-stroke gripper 2-finger parallel gripper with large jaw stroke for large parts and / or a broad range of parts Field of application
More informationElectrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
More informationSRM Universal Rotary Actuator. The pneumatic Rotary Actuator with the greatest Power Density on the Market
SRM Universal Rotary Actuator The pneumatic Rotary Actuator with the greatest Power Density on the Market SRM Universal Rotary Actuator. Maximum Power Density. Large Through Bore. Maximum Flexibility.
More informationPrecise. Compact. Reliable. MPZ Small Components Gripper
MPZ Precise. Compact. Reliable. MPZ Small Components Gripper Small 3-finger centric gripper with base jaws guided on T-slots Field of Application F or universal use in clean to slightly dirty working environments,
More informationElectrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
More informationCam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More information7 Important information on selection tables and dimension drawings
Possible geometrical combinations Important information on selection tables and dimension drawings. Possible geometrical combinations.. Structure of the tables These tables show geometrically possible
More informationGoTo Europe Focused Delivery Program. Product overview assembly technology
GoTo Europe Focused Delivery Program Product overview assembly technology 2 GoTo Europe Products you need, delivered when you need them In today s global competition every day counts. Fast response times
More informationCompact. Fast. Productive. DRL Lift/Swivel Unit
DRL Compact. Fast. Productive. DRL Lift/Swivel Unit Compact lift/swivel unit consisting of a strong short-stroke cylinder and a rack pinion swivel drive. Field of Application For use in clean and slightly
More informationModular. Robust. Flexible. SWS Quick-change system
SWS Modular. Robust. Flexible. SWS Quick-change system Pneumatic tool changing system with patented locking system. Field of Application C an be used wherever short changeover times between a handling
More informationProduct Information. Universal rotary unit ERS
Product Information ERS ERS Compact. Flexible. Fast. ERS Electrical rotary unit with torque motor and angle of rotation > 360 as well as the pneumatic holding brake and rotary feed-through options, and
More informationSFL. Application example. Pneumatic Rotary Actuators Rotor. Weight kg. Axial force N. Sizes 25..
SFL Sizes 25.. 64 Weight 0.09.. 0.71 kg Torque 0.12 Nm.. 3.9 Nm Axial force 10.. 50 N Bending moment 0.1.. 0.5 Nm Application example Sorting unit with SFL rotor to drive the separator switch Rotor SFL
More informationMT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR
MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES
More information/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting
roduces a table cylinder non-rotating accuracy MXH / ø, ø, ø1, ø A table cylinder suitable for short pitch mounting Application example Auto switches offer numerous variations Reed switches, solid state
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationSolenoid Valves & Accessories. Cylinder Control Bases. Features. Performance Data. Materials
Valves & Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 Features l Controls cylinder extension and retraction l Allows rapid cylinder return l -Way Normally Closed l Quick Exhaust
More informationOverview. Bosch Rexroth Corp /11 Aluminum Framing. Linear Motion and Assembly Technologies. Section 8: Air Supply Elements
91 500 201 0/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Overview Air supply elements convert certain profiles into compressed air bars. Convenient and flexible pneumatic connections
More informationDDF. Application example. Feed-through Rotary Feed-through for Robots. Max. speed. Air feed-through. Sizes 031..
DDF www.comoso.com Sizes 031.. 160 Max. speed Air feed-through 120 1 min 2x.. 4x Electrical feed-throughs Up to 10x Application example Insertion tool for assembling small to medium-sized axes. The rotary
More informationMaterial Handling System
72 The versatile Material Handling System Modern factories are geared towards high speed production. Time pressure increases constantly. Changeover time between production runs need to be shorter. Therefore
More informationMXL Timing Belt Pulleys
MXL TIMING BELT PULLEYS Quality 15 15 MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize QPMMXLA25015F03 QPMMXLA250F03 QPMMXLA2501F04 QPMMXLA25020F04 15 1 20 3 (.111) Tolerance : 3 mm
More informationSCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs.
SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs. Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationCompact Slide. Series MXH ø6, ø10, ø16, ø20
Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations
More informationCandy Coup-Link OVER YEARS OF INNOVATION
Candy Coup-Link Zero-backlash, flexible-shaft couplings High torque, excellent response Accommodates misalignment and shaft endplay Aluminum and stainless steel options Inch and metric bores available
More informationFruitland 250,370 and 500 Pump Rebuild Procedure
Fruitland 250,370 and 500 Pump Rebuild Procedure - Drain oil by removing drain plug and check any contaminations in oil. - Remove the four bolts and aluminum sealing washers that connect the outer cover
More informationigus slewing ring bearings
PRT... igus slewing ring bearings plastics for longer life... igus.com/prt... IG-B12 iglide PRT - Table of Contents Maintenance free slewing ring bearing Type 01: High rigidity from page 5 Type 01 with
More informationFlex Finger Tooling 100/125 Series
Flex Finger Tooling 100/125 Series FLEX 100/125 Finger Tooling allows quick and easy changeover of tools between new die sets. Our modular components are simple to configure due to the ability to adjust
More informationPWG. Application example. Pneumatic 2-Finger Angular Grippers Universal Angular Grippers. Sizes Gripping moment 6 Nm..
PWG Sizes 65.. 230 Weight 0.33 kg.. 16.3 kg Gripping moment 6 Nm.. 934 Nm Opening angle per finger 20 Workpiece weight 1.1 kg.. 43 kg Application example Rotary feed unit for shafts PWG 130-B 2-Finger
More informationAT5 Timing Belt Pulleys
Quality 5 mm AT5 (.1969") MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize (.8) NOTE: Dimensions in are in inches. QPMAT5A16010F06 QPMAT5A16011F06 QPMAT5A16012F06 QPMAT5A16013F06 QPMAT5A16014F06
More informationPerformance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported
More informationCam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationSRX Series Stainless Steel Body Air Cylinders with Continuous Position Feedback
with Continuous Position Feedback P P1L SRX SR/SRM, SR/SRM Contents Features... 42 Cylinder Ordering Information... 43 Specifications... 44 Engineering Specifications... 45 imensions...46-50 Mechanical
More informationPrecision Modules PSK
Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module
More informationLinear drives SLG, flat design
Features General information Piston 8, 12 and 18 Stroke lengths of 100 900 mm Two cushioning types selectable: Elastic cushioning Shock absorbers Direct mounting via centering holes Extremely flat design
More informationCABLE-DRIVEN PNEUMATIC ROTARY ACTUATOR
R LE-RIVEN PNEUTI ROTRY TUTOR ajor enefits Exceptionally low profile for confined spaces Three bore sizes and two standard rotations, 90 and 180 Standard internal shock pad eliminates metal to metal contact,
More informationFlexible Couplings and Hub-shaft Connections COUPLINGS
Flexible Couplings and Hub-shaft Connections COUPLINGS High-reliability Metal Plate Spring Format Realizing Its Best Shape Through Finite Element Analysis is an ultrahigh-rigidity flexible coupling derived
More informationCLAMPING ELEMENTS SELF-CENTRING RCK 15 TYPE SELF-CENTRING RCK 13 TYPE
CLAMPING ELEMENTS The clamping system connects one or two component parts solidly to the drive shaft, which allow motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps
More informationThe New Generation ISO Cylinders for a Dynamic Future
Electric Drives Linear Motion and and Controls Hydraulics Assembly Technologies Pneumatics Service The New Generation ISO Cylinders for a Dynamic Future Rexroth s new generation of ISO pneumatic cylinders
More informationINFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES
INFORMATION SHEET: SERIES SxL/SxH DESIGN [] SLIDES IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationplanetroll Planetary Gearheads
planetroll Planetary Gearheads www.diequa.com 630-980-1133 Overview Planetary Servo Gearheads by Planetroll German Engineered - Ecomically Priced The Planetdrive series of precision planetary servo gearheads
More informationRound Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
More informationCompliant. Precise. Reliable. FUS Insertion Unit
FUS Compliant. Precise. Reliable. FUS Insertion Unit Symmetrical insertion unit with centric locking and monitoring. Field of Application Assembly tasks with very little play among the parts to be aligned
More informationUniversal cylinders. single acting with spring return 5 to 100 tonnes. Features. Applications
Universal cylinders YS Universal cylinders single acting with spring return 5 to 100 tonnes Universal cylinders are designed and manufactured to work in the toughest environments to which this type of
More informationThe New Generation ISO Cylinders for a Dynamic Future
Electric Drives Linear Motion and and Controls Hydraulics Assembly Technologies Pneumatics Service The New Generation ISO Cylinders for a Dynamic Future Rexroth s new generation of ISO pneumatic cylinders
More informationLinear guides MGE 13.2 Linear guides
13-2 MGE 13.2 Linear guides Linear guides For constructing linear guides based on cam roller guides Cam roller guides are suitable for applications with high speeds and medium loads, in particular for
More informationKONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
More informationSteel Accessories for hand held demolition tools
Steel Accessories for hand held demolition tools Steel Accessories for pneumatic, hand held hydraulic, gas powered and electric demolition tools The steel accessories in this catalog are intended for use
More informationOverview. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) Bosch Rexroth Corp.
881 500 201 08/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Section : Caps and Finishing Elements Overview The wide variety of caps, end pieces, and T-slot covers helps you improve safety,
More informationWorm gear S 345. Properties: General: Single-stage worm gear For use in combination with our motors.
S 345 Aluminium Power deviation 90 Options: Special shaft, 2nd shaft end Loading capacity Max. radial force N 100 Max. axial force N 50 Mounting Shaft diameter mm 6 Weight kg 1.2 Flange 5 1.8 0.65 10 1.9
More informationKH Hypoid Series Precision Range Steel
KH Hypoid Series Precision Range Steel Compact hypoid gearheads Steel & aluminium construction ISO 9409 output flange with through bore 7 frame sizes from 064 up to 285 ISO output flange ideal for preloaded
More information7 Important Information on Selection Tables and Dimension Sheets
Information on selection tables GK 010 Important Information on Selection Tables and Dimension Sheets.1 Information on selection tables Selection table example AM n e = 1400 rpm 80 Nm i n a M a max F Ra
More informationTable of Contents General Specifications, Available Mountings... 1 Introduction... 2 Application Examples... 3 Features... 4 Theory of Operation... 5
With Continuous Position Feedback Catalog AU08-0971/NA September, 2002! Compact Design! Highly Accurate Position Feedback Capability! Electronic Controllers Available! 5 Bore Sizes Table of Contents General
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationNEW. Linear Ball Bushing Bearings and 60 Case Shafting. Profile Rail Linear Guides
Linear Ball Bushing Bearings and 60 Case Shafting Thomson invented the ball bushing bearing over 60 years ago and has since been the recognized leader in this field. Our linear products provide low friction,
More informationSeries MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
More informationElectrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
More informationLINEAR SLIDES RECISION NDUSTRIAL OMPONENTS DESIGN. Phone: FAX:
R RECISION NDUSTRIAL OMPONENTS R LINEAR SLIDES 2. 4. 3. 1. Ball Slides 2. X, X-Y, X-Y-Z Positioners with Micrometers 3. Rails 4. Crossed Roller Slides 1. 2-1 TECHNICAL SECTION Typical coefficient of friction
More informationExtraction arm FX100 Original
Bench top extraction systems for all environments. The Nederman bench top systems can be used in every type of environment, from assembly stations, where soldering fumes are extracted, to laboratories,
More informationStainless Conveyor Drive.
Stainless Conveyor Drive UNIQUE, POWERFUL PERFORMANCE Bronze Output Shaft Bushing Safety Cover Safety Cover WashTite Shield Bronze Intput Shaft Bushing WashTite Shield Torque Arm Bracket Solid Stainless
More informationModular. Precise. Robust. AGE-S-XYZ Compensation Unit
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction. Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
More information8 Important Information about Tables and Dimension Sheets
Geometrically possible combinations Important Information about Tables and Dimension Sheets.1 Geometrically possible combinations Structure of the tables These tables show combinations of gear units and
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationMTB 42 Belt Driven Linear Actuator
LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features
More information2014 Product Catalog.
www.wtechnologylink.com 2014 Product Catalog 19515 Oil Center Boulevard, Houston, TX, 77073 Phone: 281-209-9111 Toll Free Sales: 1-888-592-2996 (USA) Fax: 281-209-9191 Email: sales@wtechnologylink.com
More information4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
More informationRCK CLAMPING ELEMENTS
RCK CAMPING EEMENTS SERIES RCK 11 page 6 SERIES RCK 13 7 SERIES RCK 15 8 SERIES RCK 16 9 SERIES RCK 19 10 SERIES RCK 40 11 SERIES RCK 45 12 SERIES RCK 50 13 SERIES RCK 55 14 SERIES RCK 60 15 SERIES RCK
More informationHydraulic Jacks & Tools Test rig
ydraulic Jacks & Tools Test rig ydraulic test rig for hoisting equipment model RPYS-1215 Capacity max. 12 t or testing pul-lifts, lever hoists, chain blocks, wire rope pullers as well as other lifting
More informationSB4 & SB6 SERIES GOLD LINE SIDE-BY-SIDE SHOT PINS
ISO 9001 REGISTERED SB4 & SB6 SERIES GOLD LINE SIDE-BY-SIDE SHOT PINS CORROSION & WELD SPATTER RESISTANT MOUNTING FOR CYLINDICATOR STYLE PROX SWITCHES NAAMS STANDARD MOUNTING NPT or G PORTS LIGHTWEIGHT
More informationCompact. Flat. Productive. Compact Change System CWS
CWS Compact. Flat. Productive. Compact Change System CWS Compact manual change system with integrated air feed-through for the most important SCHUNK gripping and compensating modules. Field of Application
More information8 (800) (звонок бесплатный) Length tolerances for shafts to DIN 7168, medium series.
2 Guiding systems Fig 20 SKF precision shafts ( fig 20 ) can be supplied either as solid or hollow shafts. The solid shafts are available in all dimensions required to fit SKF linear ball bearings; the
More informationSTH SERIES Hollow Rotary Index Tables
STH SERIES T he STH is an excellent fit for mid-range index table applications that require high accuracy, flexible mounting and a large hollow shaft. This product sets the standard for rotary positioning
More informationRACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
More informationRodless Pneumatic Cylinders Series OSP-P
Rodless Pneumatic Cylinders Series OSP-P System Concepts & Components... 2-5 Technical Data... 7-9 Dimensions... 10-15 Active rakes... 16-19 Accessories (Mounts & Supports)... 20-29 Ordering Information...30
More information