SAN10B ( <00>)

Transcription

1 SAN10B ( <00>) Wood 5.5mm (7/32 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN USA Customer Service Americas: Europe, Middle East, and Africa: europe.sanus@milestone.com Asia Pacific: sanus.ap@milestone.com accents.sanus.com 2010 Milestone AV Technologies, a Duchossois Group Company. All rights reserved. Accents is a Milestone brand. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

2 OPT Wood stud walls Tools required Choose an Option WARNING: This product contains small items that could be a choking hazard. Caution / Warning Heavy! Assistance Required. Troubleshooting and Maintenance <00>

3 mm 6.0 in mm 2.0 in mm 7.87 in. 100 mm 3.94 in. 75 mm 2.95 in mm 6.0 in mm 5.1 in. 75 mm 3.0 in. 100 mm 3.9 in mm 2.1 in mm 4.6 in mm 8.9 in <00> 3

4 CAUTION: IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCT Specifications Weight capacity-do NOT EXCEED: kg (50 lbs) includes TV and any accessories Tilt: ±15 CAUTION: Avoid potential personal injuries and property damage! Do not use this product for any purpose not explicitly specified by manufacturer. The wall must be capable of supporting five times the weight of the monitor and mount combined. This product is designed for use in wood frame walls only! If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact manufacturer Customer Service or call a qualified contractor. Manufacturer is not responsible for damage or injury caused by incorrect assembly or use. Supplied Parts and Hardware. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: All hardware included may not be used <00>

5 [01] x 1 [02] x 2 [03] x 2 M4 x 12mm [04] x 4 [05] x 4 [06] x 4 M4 [07] x <00> 5

6 Wall Mounting CAUTION: Wood Stud Mounting CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage: Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit. DO NOT over-tighten the lag bolts [03]. Any material covering the wall must not exceed 16 mm (5/8 in.). Minimum wood stud size: common 2 x 4 in. (nominal 1.5 x 3.5 in.) <00>

7 5.5mm (7/32 in.) 1 Wood Stud Wall Mounting 1. Locate studs. Verify the center of the stud with an awl or thin nail or use an edge to edge stud finder. 2. Level the wall plate [01] and mark the hole locations. 3. Drill pilot holes as illustrated. 4. Using the hex key [07], screw in the mounting bolts [03] until the heads are approximately 6.35mm (1/4 in.) away from wall. 1 < 16 mm (5/8 in.) 2 [01] 3 4 [07] [03] 6.35 mm 1/4 in. 75mm 3 in <00> 7

8 2 OPT Attach Bracket [01] to TV For TV's with 200 x 100 mm (7.87 x 3.94 in.) hole pattern attach bracket extensions [02] to bracket [01]. [01] [06] [02] [05] 200 x 100 mm (7.87 x 3.94 in.) Mounting [01] [04] [02] 100mm (3.94 in.) 200mm (7.87 in.) 100 x 100 mm (3.94 x 3.94 in.) Mounting 75 x 75 mm (3 x 3 in.) Mounting [01] [01] [04] [04] 100mm (3.94 in.) 100mm (3.94 in.) 75mm (3 in.) 75mm (3 in.) <00>

9 3 Mount TV/Bracket Assembly to Wall HEAVY! You will need assistance with this step. Hang the assembly onto the mounting bolts [03]. Using the hex key [07], tighten the mounting bolts [03] until the bracket [01] is secure. CAUTION: Do not over-tighten the mounting bolts [03]. CAUTION: [07] [03] [01] [03] Tension Adjustment Loosen or tighten the wing nut of the bracket [01] to adjust tilt tension. [01] <00> 9

10 Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, Milestone ), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document <00>