PIPER AIRCRAFT CORPORATION

Transcription

1 TURBO DAKOTA PARTS CATALOG CARD 1 OF 1 DAKOTA PIPER AIRCRAFT CORPORATION Courtesy of Bomar Flying Service PART NUMBER A1

2 AEROFICHE EXPLANATION AND REVISION STATUS The s Catalog information incorporated in this set of Aerofiche cards has been arranged in accordance with the general specifications of Aerofiche adopted by the General Aviation Manufacturer s Association. Conversion of Aerofiche alpha/numeric code numbers: First number is the Aerofiche card identifier. Letter is the horizontal line reference per card. Second number is the vertical line reference per card. Example: 2J16 = Aerofiche card number two of given set. Grid location J16. To aid in locating the various sections and related information desired, the following is provided: A complete Catalog Table of Contents is given at Grid 1A8 of Aerofiche card number 1 of this set. Each additional card in this set will have a Table of Contents for all sections on that particular card. This table will start at Grid A3. REVISIONS The information compiled in this Aerofiche s Catalog will be kept current by revisions distributed periodically. These revisions will supersede all previous revisions and will be complete Aerofiche card replacements and shall supersede Aerofiche cards of the same number in the set. Current Revisions to this series s Catalog issued February 15, 1979 are as follows: (PR790411)...Dated April (PR790712)...Dated July (PR801114)...Dated November (PR840713)...Dated July (IR950306)...Dated March 1995 *INTERIM CHANGE TO PARTS CATALOG Changes have been made to Sections II and IX of Card 1. There are no other changes included in this interim change revision. Please discard your current card 1, and replace it with the revised card 1. NOTE: Refer to the last card of the Piper - s Price List - Aerofiche for a checklist of current revision dates and card effectivities for this parts c a t a l o g. INTERIM REVISION: MARCH A2

3 INTRODUCTION This illustrated s Catalog is designed to provide simple but positive identification of replacement parts for the Piper Turbo Dakota Model manufactured by the Piper Aircraft Corporation of Vero Beach, Florida. NOTE: UNDER NO CIRCUMSTANCES SHALL THIS CATALOG BE USED FOR RIGGING AND INSTALLATION PURPOSES. It is suggested that this catalog be thoroughly studied to determine its arrangement prior to its utilization. 1. The catalog is divided into thirteen (13) major sections described as follows: a. Section I to XII inclusive contains all replacement parts for the complete airplane. Each section is subdivided and each division includes an illustration and a parts listing. b. Section XIII is the Miscellaneous Group. This group includes an illustration and parts list for the Placards and Exterior Stencils and a listing of the Optional Equipment Kits, Repair Kits and Special Tools. 2. The following is a brief explanation of the columns in the parts listing: a. The FIGURE AND INDEX column indicates the illustration figure number and its part index number. Example: (2-1), the 2 is the figure number and the 1 is the index number. The figure number appears only at the top of each parts list page. b. The PART NUMBER column contains the identifying number of the replacement part and this number must be shown on all s Orders. c. The CODE column is for the purpose of indicating special uses of the part. An explanation of the letter code used is shown on the grid (page) preceding each parts listing and pertains to that listing only. ALL PA RTS CODED WITH A W MUST BE PURCHASED FROM PIPER AIRCRAFT CORPORATION, LOCK HAVEN, PA. ALL PARTS NOT CODED WITH A W MUST BE PURCHASED FROM PIPER AIRCRAFT CORPORATION, VERO BEACH, FLORIDA. d. The NOMENCLATURE column indicates the part name. This name must be shown on all s Orders. e. The NO. REQ. ( Required) column represents the total quantity of parts used per figure when the part is not indented and the quantity of parts used per assembly when the part is indented. The symbol AR listed in this column means As Required. f. The SERIAL NUMBERS AFFECTED column indicates the part application by airplane serial number. EXAMPLE Figure and No. SERIAL NUMBERS Index Code NOMENCLATURE Req. AFFECTED 2-1 XXXXX-XX DOOR ASSEMBLY - Baggage compartment X -2 XXXXX-XX *TUBE ASSEMBLY - Baggage door latch X -3 XXXXX-XX * *CLEVIS - Door latch tube assembly X -4 XXXXX-XX * *CLIP - Door latch tube assembly X In the Nomenclature column, the next higher assembly relationship of items covered is shown by the degree of indention of each item and is indicated by an asterisk (*). One asterisk signifies one indention, two signifies two indentions, etc. The example listing above is interpreted as follows: If the DOOR ASSEMBLY (not indented) is ordered, it will include the three items indented under the Door Assembly. If the TUBE ASSEMBLY (indented one space) is ordered, it will include the two items indented under the Tube Assembly. If you want only a CLEVIS or CLIP, you order only that item. REVISED: JULY A3

4 3. The ATTACHlNG PARTS such as nuts, bolts, screws, etc., that are available as commercial hardware items, are not generally supplied by the Piper Aircraft Corporation. The catalog lists, for your convenience, those attaching parts required for main assemblies and installations. The identifying number for these parts appears after the part name. 4. All items of Optional Equipment are contained in the parts list in their proper sequence and sections. These items were not marked optional, since they are fully identified by their descriptions. HOW TO IDENTIFY A PART IF YOU KNOW WHAT IT LOOKS LIKE AND KNOW WHERE IT IS LOCATED 1. Refer to Figure 1 to determine the Section number in which the part is used. 2. Refer to the Table of Contents and locate the section. Note the figure numbers that illustrate the various subgroups of this main section. a. Select the figure title you think might contain the part you wish to identify and proceed to the grid (page) specified. 3. NOTE: If you don t find the part on this illustration, try another figure in this group. 4. Refer to the Figure and Index in the s Listing for complete description of the part. HOW TO ORDER PARTS In ordering parts for your Piper airplane, observe the following instructions which will aid in your getting the right parts required without delay: a. Place your order with the distributor or dealer for your territory, since parts are available only through our distributor organization. b. Always specify the model and serial number of your airplane. c. Always specify, Name, Type and Quantity required. d. Specify the method of shipment - freight, express, parcel post, air express, air freight, or air parcel post. Where the nature of the shipment requires it or when no instructions are given, we reserve the right to ship the most suitable way. GENERAL INFORMATION a. Shortages All orders are checked and rechecked before leaving our Shipping Department. A packing slip is enclosed with the shipment and claims for errors or shortages must be made within three (3) days after receipt of orders. b. Returned Goods No material should be returned to us without first securing our written permission. Material sent in without notice will be held at the owner s risk for thirty (30) days and will then be disposed of as we see fit. Transportation charges must be PREPAID on returned goods or the shipment will be refused. c. Transportation Liabilities The Piper Aircraft Corporation cannot be held liable for damages to parts in transit from the factory. If a shipment is received in a damaged condition, have the delivery man or Transportation Company make a notation of the damage and file your claim with the Carrier. In case of concealed damage, do not attempt to remove the part from the shipping container, or endeavor to repair the damage, but call the Carrier and have his Claim Agent inspect the damage before filing your claim with the Carrier. ISSUED: FEBRUARY A4

5 SERIAL NUMBER INFORMATION The following information should be kept in mind when ordering from the catalog. a. The serial numbers of the aircraft covered by this s Catalog are as follows: ( 1 ) Serial numbers of the 1979 Models are to inclusive. REVISED: NOVEMBER A5

6 STANDARD PAINT CHART EXTERIOR MFG. PIPER PART NUMBER NO. QUART GALLON ACRYLIC LACQUER Madrid Red B Bahama Blue B Avocado G Las Vegas Gold G-2124-A Dakota Black H-6117-R Ocala Orange (base coat) P Ocala Orange (top coat) C-2065-A Juneau White B-7784-A Lime Green D Baja Yellow D Denver Brown (base coat) K Denver Brown (top coat) B Matador Red R Royal Blue X Hickory Brown Y Indian Silver M Sage Green R3796R Firethorn Red R3956R Dark Blue R3957R Silver M9514R Buckskin R3959R Sandalwood Tan R8175R Platinum Gray R8174R Thinner B5408-B REVISED: NOVEMBER A6

7 STANDARD PAINT CHART MFG. PIPER PART NUMBER NO. QUART GALLON EXTERIOR POLYURETHANE ENAMEL (Dupont Imron) Baja Yellow H7850U Juneau White H7848U Ocala Orange H7857UM Madrid Red H7851UM Bahama Blue H7853U Avocado H7852U Las Vegas Gold 5242U Dakota Black 99U Denver Brown H7859U Matador Red H7858U Royal Blue H7856U Hickory Brown H7855U Silver 45431U Lime Green H7854U Sage Green K7887U Firethorn K7888UW Buckskin K7890U Dark Blue K7891U Platinum Gray N7819U Sandalwood Tan N7818U Catalyst (Activator) 192S Reducer Y8485S Retarder 8100S Accelerator 189S POLYURETHANE PRIMER (Dupont Imron) Wash Primer B Wash Primer Thinner K Acid Thinner B REVISED: NOVEMBER A7

8 TABLE OF CONTENTS FIGURE NUMBER FIGURE TITLE GRID NUMBER 1 View of Complete Airplane...1A12 SECTION I WING GROUP 2 Wing Installation...1A13 3 Wing Leading Edge Assembly...1A17 4 Wing Trailing Edge Assembly...1A20 5 Aileron Assembly...1B1 6 Flap Assembly...1B4 SECTION II FUSELAGE GROUP 7 Fuselage Assembly - Complete...1B7 8 Fuselage Upper Forward Cockpit Assembly...1B10 9 Fuselage Upper Center Cockpit Assembly...1B13 10 Fuselage Lower Forward Cockpit Assembly...1B17 11 Fuselage Lower Aft Cockpit Assembly...1B21 12 Fuselage Aft Section...1C1 13 Fuselage Cabin and Baggage Door Installation...1C5 14 Fuselage Enclosure Installation...1C9 SECTION III TAIL SURFACES GROUP 15 Tail Surfaces Installation...1C13 16 Stabilator Assembly...1C16 17 Fin Assembly...1C19 18 Rudder Assembly...1C22 SECTION IV LANDING GEAR GROUP 19 Nose Gear Installation...1D1 20 Nose Gear Strut Assembly...1D5 21 Nose Wheel Assembly (McCauley)...1D9 22 Main Gear Installation...1D12 23 Main Wheel Assembly...1D16 24 Brake Assembly...1D19 25 Main and Nose Wheel Fairing Installation...1D22 25A Main Landing Gear Strut Fairing Installation...1E1 26 Hand Brake Installation...1E4 27 Toe Brake Installation...1E7 28 Toe Brake Master Cylinder Assembly...1E10 SECTION V CABIN EQUIPMENT GROUP 29 Cockpit Finishing Installation...1E13 30 Window Curtains Installation...1E18 31 Carpet Installation...1E21 32 Seats Installation...1F1 33 Vertically Adjustable Front Seat Assembly...1F5 REVISED: JULY A8

9 TABLE OF CONTENTS SECTION VI INSTRUMENTS GROUP 34 Instrument Panel Installation...1F9 35 Vacuum System Installation...1F13 36 Pitot Static System Installation...1F16 SECTION VII POWER PLANT GROUP 37 Power Plant Installation...1F19 38 Engine Instrument Lines Installation...1F22 39 Engine Baffle Installation...1G1 40 Engine Cowl Installation...1G4 41 Propeller Assembly (Hartzell)...1G7 42 Engine Controls Installation...1G10 SECTION VIII FUEL SYSTEM GROUP 43 Fuel System Installation...1G14 44 Fuel Tank Assembly...1G18 SECTION IX CONTROL SYSTEM GROUP 45 Aileron Control Installation...1G21 46 Rudder Control Installation...1H1 47 Rudder Trim Mechanism Installation...1H4 48 Stabilator Control Installation...1H7 49 Stabilator Trim Installation...1H10 50 Flap Control Installation...1H14 51 Control Wheel Installation...1H18 52 Rudder Pedal Installation...1H21 SECTION X ENVIRONMENTAL GROUP 53 Heat and Defrost System Installation...1I1 54 Fresh Air Ventilation Installation...1I5 55 Air Conditioning Compressor and Refrigerant Lines Installation...1I8 56 Air Conditioning Duct and Evaporator Installation...1I11 57 Air Conditioning Condenser Installation...1I14 58 Oxygen System Installation (Portable)...1I17 SECTION XI ELECTRICAL SYSTEM GROUP 59 Electrical System Installation...1I20 60 Instrument Panel Electrical Installation...1J1 61 Air Conditioning Electrical Installation...1J4 62 Battery Installation...1J7 63 External Power Supply Installation...1J10 64 Strobe Lights Installation...1J13 REVISED: JULY A9

10 TABLE OF CONTENTS SECTION XII ELECTRONICS GROUP 65 Electric Trim Installation 1J16 66 AutoFlite II Installation 1J19 67 AutoControl III B Installation 1J22 68 Piper Automatic Locator (ELT) Installation (Communications Components Corp.) 1K1 68A Piper Automatic Locator (ELT) Installation (Narco Avionics) 1K4 69 Encoder Installation (Narco - AR 500 and United P3) 1K7 70 Radio, Antenna System and Static Wicks Installation 1K10 71 Audio Selector Assembly 1K13 Radio Installation Drawings 1K16 SECTION XIII MISCELLANEOUS GROUP 72 Placards and Exterior Stencils 1K18 Optional Equipment Kits and Repair Kits 1K22 NUMERICAL INDEX 1L1 REVISED: JULY A10

11 1A11 INTENTIONALLY LEFT BLANK

12 Figure 1. Complete Airplane ISSUED: FEBRUARY A12

13 Figure 2. Wing Installation REVISED: JULY A13

14 CODE EXPLANATIONS FOR FIGURE 2 A - See Figure 3 for component parts. B - See Figure 4 for component parts. C - See Figure 44 for component parts. D - See Figure 5 for component parts. E - See Figure 6 for component parts. F - Used if navigation or strobe lights are not installed. G - Used if navigation or strobe lights are installed. H - This assembly includes brake lines, pitot lines (in left wing only), inspection cover plates and fuel lines. W - These parts must be ordered from Service Spares Department, Piper Aircraft, Lock Haven, Penna. REVISED: NOVEMBER A14

15 SECTION I Wing Group Figure and Index Code Nomenclature DRAWING - Wing Installation PIPER PARTS CATALOG No. Req. WING INSTALLATION Serial s Affected H,J WING ASSEMBLY - Left 1 ` H,J WING ASSEMBLY - Right A * LEADING EDGE ASSEMBLY - Wing inboard, left A * LEADING EDGE ASSEMBLY - Wing inboard, right A * LEADING EDGE ASSEMBLY - Wing outboard, left A * LEADING EDGE ASSEMBLY - Wing outboard, right B,J * TRAILING EDGE ASSEMBLY - Wing aft section, left B,J * TRAILING EDGE ASSEMBLY - Wing aft section, right 1-4a * PLUG - Button (HS48172-K2215) C TANK ASSEMBLY - Fuel, left C TANK ASSEMBLY - Fuel, right D AILERON ASSEMBLY - Left D AILERON ASSEMBLY - Right E FLAP ASSEMBLY - Left E FLAP ASSEMBLY - Right F TIP ASSEMBLY - Wing, left G TIP ASSEMBLY - Wing, left F TIP ASSEMBLY - Wing, right G TIP ASSEMBLY - Wing, right * STIFFENER - Wing tip, upper, left * STIFFENER - Wing tip, upper, right * STIFFENER - Wing tip, lower, left * STIFFENER - Wing tip, lower, right STRIP - Stall COVER - Access hole COVER - Access hole SHIM - Wing attachment BUTTON ASSEMBLY - Plug, gear service access COVER - Wing bolt, left COVER - Wing bolt, right MOULDING - Wing root PLATE ASSEMBLY - Aft wing access, left PLATE ASSEMBLY - Aft wing access, right BUSHING - Flap hinge, center and outboard BUSHING - Flap hinge, inboard CHANNEL - Gang, bottom rear CHANNEL - Gang, bottom forward CHANNEL - Gang CHANNEL - Gang (PS ) CHANNEL - Gang (PS ) CHANNEL - Gang CHANNEL - Gang CHANNEL - Gang CHANNEL - Gang CHANNEL - Wing skin stiffener W BOLT - (AN3-11A) W WASHER - (AN960-10) W NUT - (MS C) W BOLT - (AN3-13A) W WASHER - (AN960-10) W NUT - (MS C) SCREW - (MS ) W WASHER - (AN960-10) W NUT - (MS C) 26 When ordering, always specify, Description, and Serial of Aircraft REVISED: JULY A15

16 WING INSTALLATION Figure and Index PIPER PARTS CATALOG Code Nomenclature No. Req. Serial s Affected Section I Wing Group W BOLT - (AN5-6A) W WASHER - (AN ) AR W NUT - (MS C) BOLT - (NAS ) W WASHER - (AN ) W WASHER - (AN L) NUT - (MS ) SCREW - (MS ) WASHER - (AN960-8L) NUT - (PS ) SCREW - (MS ) WASHER - (AN960-8L) BOLT - (AN176-15A) W WASHER - (AN ) WASHER NUT - (MS ) BOLT - (AN176-14A) W WASHER - (AN ) NUT - (MS ) BOLT - (AN176-14A) WASHER W WASHER - (AN ) NUT - (MS ) BOLT - (AN176-15A) W WASHER - (AN ) WASHER NUT - (MS ) BOLT - (AN176-14A) WASHER W WASHER - (AN ) NUT - (MS ) BOLT - (AN176-14A) W WASHER - (AN ) NUT - (MS ) BOLT - (AN176-14A) WASHER NUT - (MS ) W SCREW - (MS24694-S56) SCREW - (MS ) PLACARD - Warning WING WALK - Safety, flap WING WALK - Safety wing SAFETY WALK COMPOUND - Black (1 quart can) AR RETAINER - Wing walk SCREW - (MS ) SCREW - (MS ) RING - Tie down PAD - Jack 2 When ordering, always specify, Description, and Serial of Aircraft REVISED: JULY A16

17 Figure 3. Wing Leading Edge Assembly REVISED: JULY A17

18 CODE EXPLANATIONS FOR FIGURE 3 ISSUED: FEBRUARY A18

19 SECTION I Wing Group Figure and Index PIPER PARTS CATALOG Code Nomenclature WING LEADING EDGE ASSEMBLY No. Req. Serial s Affected LEADING EDGE ASSEMBLY - Wing inboard, left LEADING EDGE ASSEMBLY - Wing inboard, right * RIB - Wing nose, Sta , left * RIB - Wing nose, Sta , right * RIB ASSEMBLY - Sta , left * RIB ASSEMBLY - Sta , right * RIB - Wing nose, Sta , left * RIB - Wing nose, Sta , right * RIB - Wing nose, root, left * RIB - Wing nose, root, right * SKIN ASSEMBLY - Inboard wing * * DOUBLER ASSEMBLY - Leading edge wing * SKIN - Leading edge, left * SKIN - Leading edge, right * SKIN ASSEMBLY - Bottom inboard root, left * SKIN ASSEMBLY - Bottom inboard root, right * SKIN ASSEMBLY - Top inboard root, left * SKIN - Wingwalk, forward, right * SPAR - Leading edge, inboard, left * SPAR - Leading edge, inboard, right * FITTING ASSEMBLY - Forward spar, left * FITTING ASSEMBLY - Forward spar, right * GASKET - Air duct * DOUBLER - Air inlet * DOUBLER - Forward spar * TUBE ASSEMBLY - Air duct * STRAP - Fuel tank attachment LEADING EDGE ASSEMBLY - Wing outboard, left LEADING EDGE ASSEMBLY - Wing outboard, right * SKIN - Forward, left * SKIN - Forward, right * RIB ASSEMBLY - Wing nose, Sta , left * RIB ASSEMBLY - Wing nose, Sta , right * RIB - Wing nose, Sta , left * RIB - Wing nose, Sta , right * RIB - Wing nose, Sta , left * RIB - Wing nose, Sta , right * RIB - Wing nose, Sta , left * RIB - Wing nose, Sta , right * RIB - Wing nose, Sta. 174, left * RIB - Wing nose, Sta. 174, right * RIB - Wing nose, Sta , left * RIB - Wing nose, Sta , right * STRAP - Skin attachment, Sta , left * STRAP - Skin attachment, Sta , right * SKIN - Forward, left * SKIN - Forward, right * SKIN - Aft, top, left * SKIN - Aft, top, right * SKIN ASSEMBLY - Aft bottom, left * SKIN ASSEMBLY - Aft bottom, right * * DOUBLER - Cover plate attachment 3 When ordering, always specify, Description, and Serial of Aircraft REVISED: JULY A19

20 Figure 4. Wing Trailing Edge Assembly REVISED: NOVEMBER A20

21 CODE EXPLANATIONS FOR FIGURE 4 REVISED: NOVEMBER A21

22 SECTION I Wing Group Figure and Index PIPER PARTS CATALOG Code Nomenclature WING TRAILING EDGE ASSEMBLY No. Req. Serial s Affected TRAILING EDGE ASSEMBLY - Wing aft section, left TRAILING EDGE ASSEMBLY - Wing aft section, right * SPAR ASSEMBLY - Wing main, left * SPAR ASSEMBLY - Wing main, right * * SPAR ASSEMBLY - Main inboard, left * * SPAR ASSEMBLY - Main inboard, right * * SPAR ASSEMBLY - Main outboard, left * * SPAR ASSEMBLY - Main outboard, right * * TEE - Landing gear attachment * * DOUBLER - Left, forward and aft * * DOUBLER - Right, forward and aft * SPAR ASSEMBLY - Wing aft, inboard, left * SPAR ASSEMBLY - Wing aft, inboard, right * * PLATE - Aft spar * SPAR ASSEMBLY - Wing aft, outboard, left * SPAR ASSEMBLY - Wing aft, outboard, right * DOUBLER - Aft spar, rear * DOUBLER - Aft spar, rear * SKIN - Top outboard, left * SKIN - Top outboard, right * SKIN ASSEMBLY - Top inboard, left * SKIN ASSEMBLY - Top inboard, right * SKIN ASSEMBLY - Bottom inboard, left * SKIN ASSEMBLY - Bottom inboard, right * * DOUBLER ASSEMBLY - Bottom inboard * * DOUBLER ASSEMBLY - Bottom inboard 1-16a * * DOUBLER - Fairing plate, left * * DOUBLER - Fairing plate, right * SKIN ASSEMBLY - Bottom outboard, left * SKIN ASSEMBLY - Bottom outboard, right * * DOUBLER ASSEMBLY - Outboard, left * SKIN ASSEMBLY - Top center, left * SKIN ASSEMBLY - Top center, right * * CHANNEL ASSEMBLY - Bellcrank support, upper left * * CHANNEL ASSEMBLY - Bellcrank support, upper right * RIB - Sta , left * RIB - Sta , right * RIB - Sta , left * RIB - Sta , right * RIB ASSEMBLY - Sta , left * RIB ASSEMBLY - Sta , right * RIB ASSEMBLY - Sta , left * RIB ASSEMBLY - Sta , right * RIB - Sta , left * RIB - Sta , right * RIB - Sta , left * RIB - Sta , right * RIB - Sta , left * RIB - Sta , right * RIB - Sta , left * RIB - Sta , right * RIB ASSEMBLY - Sta. 157, left * RIB ASSEMBLY - Sta. 157, right * RIB - Sta. 174, left * RIB - Sta. 174, right * RIB - Sta , left * RIB - Sta , right 1 When ordering, always specify, Description, and Serial of Aircraft REVISED: NOVEMBER A22

23 WING TRAILING EDGE ASSEMBLY Figure and Index PIPER PARTS CATALOG Code Nomenclature No. Req. Serial s Affected SECTION I Wing Group * RIB - Sta , left * RIB - Sta , right * SUPPORT ASSEMBLY - Flap inboard, left * SUPPORT ASSEMBLY - Flap inboard, right * * BEARING - (KP3A) * SUPPORT ASSEMBLY - Flap * SUPPORT ASSEMBLY - Flap * * BEARING - (KP3A) * STIFFENER - Outboard, left * STIFFENER - Outboard, right * STIFFENER - Inboard, left * STIFFENER - Inboard, right * HINGE ASSEMBLY - Aileron * HINGE ASSEMBLY - Aileron * SKIN ASSEMBLY - Wing walk, right * DOUBLER - Aft spar, left * DOUBLER - Aft spar, right 1 When ordering, always specify, Description, and Serial of Aircraft REVISED: NOVEMBER A23

24 1A24 INTENTIONALLY LEFT BLANK

25 Figure 5. Aileron Assembly ISSUED: FEBRUARY B1

26 CODE EXPLANATIONS FOR FIGURE 5 W - These parts must be ordered from Service Spares Department, Piper Aircraft, Lock Haven, Penna. ISSUED: FEBRUARY B2

27 SECTION I Wing Group Figure and Index PIPER PARTS CATALOG Code Nomenclature No. Req. AILERON ASSEMBLY Serial s Affected AILERON ASSEMBLY - Left AILERON ASSEMBLY - Right * SKIN - Aileron, left inboard * SKIN - Aileron, right inboard * SKIN - Aileron, left outboard * SKIN - Aileron, right outboard * SPAR - Aileron, left * SPAR - Aileron, right * RIB - Aileron, left inboard * RIB - Aileron, right inboard * RIB - Aileron, left center * RIB - Aileron, right center * RIB - Aileron, left outboard * RIB - Aileron, right outboard * DOUBLER - Aileron, left inboard * DOUBLER - Aileron, right inboard * DOUBLER - Aileron, left outboard * DOUBLER - Aileron, right outboard * DOUBLER - Aileron, left center * DOUBLER - Aileron, right center * FILLER - Aileron * FILLER - Aileron * FITTING - Aileron * BALANCE WEIGHT ASSEMBLY - Left * BALANCE WEIGHT ASSEMBLY - Right * SCREW - (MS24694-S53) W * WASHER - (AN960-10) W * NUT - (MS C) 2 When ordering, always specify, Description, and Serial of Aircraft REVISED: NOVEMBER B3

28 Figure 6. Flap Assembly REVISED: NOVEMBER B4

29 CODE EXPLANATIONS FOR FIGURE 6 ISSUED: FEBRUARY B5

30 SECTION I Wing Group Figure and Index PIPER PARTS CATALOG Code Nomenclature No. Req. FLAP ASSEMBLY Serial s Affected FLAP ASSEMBLY - Left FLAP ASSEMBLY - Right * SKIN - Flap, bottom, left, inboard * SKIN - Flap, bottom, right, inboard * SKIN - Flap, bottom, left and right, outboard * SKIN - Flap, top, left and right, outboard * HINGE - Flap, inboard, left * HINGE - Flap, inboard, right * BRACKET - Flap hinge, center and outboard * SPAR - Flap * RIB - Left flap * RIB - Right flap * RIB - Left flap * RIB - Right flap * RIB - Flap, left, wing, Sta * RIB - Flap, right, wing, Sta * RIB - Flap, left * RIB - Flap, right * RIB - Flap, left, inboard * RIB - Flap, right, inboard * STRIP - Flap * SKIN - Flap, left, nose * SKIN - Flap, right, nose * SKIN - Flap, top, left, inboard * SKIN - Flap, top, right, inboard * CORRUGATION - Flap, top, right, inboard * DOUBLER ASSEMBLY - Left * DOUBLER ASSEMBLY - Right * ZEE - Flap, inboard right 1 When ordering, always specify, Description, and Serial of Aircraft REVISED: NOVEMBER B6

31 Figure 7. Fuselage Assembly - Complete REVISED: JULY B7

32 CODE EXPLANATIONS FOR FIGURE 7 A - Used if air conditioning is installed. B - See Figure 11 for balance of component parts. C - See Figure 12 for component parts. D - See Figure 8 for balance of component parts. E - See Figure 9 for balance of component parts. F - See Figures 10 and 11 for balance of component parts. G - When ordering, specify with or without provisions for air conditioning. W - These parts must be ordered from Service Spares Department, Piper Aircraft, Lock Haven, Penna. REVISED: NOVEMBER B8

33 SECTION II Fuselage Group Figure and Index PIPER PARTS CATALOG Code Nomenclature FUSELAGE ASSEMBLY - COMPLETE No. Req. Serial s Affected DRAWING - Fuselage Assembly (Complete) G FUSELAGE ASSEMBLY C,G * AFT SECTION - Fuselage * SKIN - Cockpit, top rear * STUD - Fastener (XX x ) * COCKPIT ASSEMBLY - Fuselage * * SKIN - Cockpit, left side * * SKIN - Cockpit, left side * * SKIN - Cockpit, right side * * UPPER COCKPIT ASSEMBLY - Fuselage * * * SKIN - Upper cockpit, top, center * * * SKIN - Windshield trim, left side * * * SKIN ASSEMBLY - Window trim, left side * * * SKIN ASSEMBLY - Window trim, right side * * * PAN - Door trim, right side D * * * UPPER COCKPIT ASSEMBLY - Forward * * * * SKIN ASSEMBLY - Upper cockpit, center * * * * SKIN ASSEMBLY - Upper cockpit, left * * * * SKIN ASSEMBLY - Upper cockpit, right * * * * COVER - Cowl deck * * * * FILLER - Forward upper cockpit, top * * * * DOUBLER - Forward upper cockpit, top * * * * SKIN - Cockpit, left front * * * * SKIN - Cockpit, right front E * * * UPPER COCKPIT ASSEMBLY - Center * * * * SKIN - Window trim, left side * * * * SKIN - Window trim, right side * * * * SKIN - Windshield trim, top front * * * * SKIN - Windshield trim, right side F,G * * LOWER COCKPIT ASSEMBLY - Fuselage * * * SCOOP - Cabin air exhaust * * * SKIN - Lower cockpit, front * * * SKIN - Lower cockpit, center front * * * SKIN - Lower cockpit, center rear * * * DOUBLER ASSEMBLY - Lower cockpit * * * DOUBLER ASSEMBLY - Lower cockpit, left * * * DOUBLER ASSEMBLY - Lower cockpit, right * * * DOUBLER - Lower cockpit * * * DOUBLER - Lower cockpit air scoop (with 4 hole) A * * * DOUBLER - Lower cockpit air scoop (less 4 hole) * * * DOUBLER - Lower cockpit, left * * * DOUBLER - Lower cockpit, right B * * * LOWER COCKPIT ASSEMBLY - Aft * * * * SKIN - Lower cockpit, left rear * * * * SKIN - Lower cockpit, right rear * * * * SKIN ASSEMBLY - Lower cockpit, center 1-38a * * * * * SKIN - Lower cockpit, center * SKIN - Cockpit, left rear W * HANDLE - Upper cockpit (N12865) COVER - ADF antenna closeout STEP ASSEMBLY - Fuselage * STRIP - Safety 1 When ordering, always specify, Description, and Serial of Aircraft REVISED: JULY B9

34 Figure 8. Fuselage Upper Forward Cockpit Assembly REVISED: JULY B10

35 CODE EXPLANATIONS FOR FIGURE 8 A - Used if NSD-360 is installed. W - These parts must be ordered from Service Spares Department, Piper Aircraft, Lock Haven, Penna. REVISED: FEBRUARY B11

36 SECTION II Fuselage Group Figure and Index PIPER PARTS CATALOG Code Nomenclature UPPER COCKPIT ASSEMBLY - Forward * FIREWALL ASSEMBLY - Upper cockpit * * CHANNEL - Firewall * * CHANNEL - Firewall, left * * CHANNEL - Firewall, right * * BEAM - Firewall * * CHANNEL ASSEMBLY - Firewall 1-6a * * ANGLE - Firewall * CHANNEL - Sta * FITTING - Upper forward cockpit, left * FITTING - Upper forward cockpit, right * PLATE ASSEMBLY - Voltage regulator support, left * CLIP - Upper cockpit, left * ANGLE - Stiffener, upper forward cockpit * ANGLE - Stiffener, upper forward cockpit * ANGLE - Stiffener, upper forward cockpit * FLANGE - Nose cowl attaching, top center * FLANGE - Nose cowl attaching, top left * FLANGE - Nose cowl attaching, top right * FITTING ASSEMBLY - Engine mount, left * FITTING ASSEMBLY - Engine mount, right * LONGERON - Upper forward cockpit, left * LONGERON - Upper forward cockpit, right * CHANNEL - Upper forward cockpit, left * CHANNEL - Upper forward cockpit, right * WEB - Upper forward cockpit, left * WEB ASSEMBLY - Upper forward cockpit, right * ZEE - Upper forward cockpit, left * ZEE - Upper forward cockpit, right * FRAME ASSEMBLY - Upper forward cockpit, left PANEL ASSEMBLY - Instrument A PANEL ASSEMBLY - Instrument * PLATE - Control wheel * PLATE - Control wheel * PLATE - Control wheel * BUSHING - Control wheel * O`` RING - Control wheel (MS ) * CHANNEL - Hand brake * CONTROL ASSEMBLY - Heat and defroster A DOUBLER - Instrument panel W CLAMP - Radio cooling hose (SAE TY F-6) CHANNEL ASSEMBLY - Brake support, left * RATCHET - Brake handle CHANNEL ASSEMBLY - Brake support, right CHANNEL - Brake support, forward CHANNEL - Brake support, aft BOX ASSEMBLY - Radio cooling HOSE - Radio cooling BUMPER - Tee bar BUSHING - Tee bar bumper W BOLT - (AN3-13A) W WASHER - (AN960-10) W NUT - (MS C) 1 FUSELAGE UPPER FORWARD COCKPIT ASSEMBLY No. Req. Serial s Affected When ordering, always specify, Description, and Serial of Aircraft REVISED: JULY B12

37 Figure 9. Fuselage Upper Center Cockpit Assembly REVISED: NOVEMBER B13

38 CODE EXPLANATIONS FOR FIGURE 9 A - Used if.250 thick sound reduction windshield is installed. W - These parts must be ordered from Service Spares Department, Piper Aircraft, Lock Haven, Penna. REVISED: FEBRUARY B14

39 SECTION II Fuselage Group Figure and Index PIPER PARTS CATALOG Code Nomenclature No. Req UPPER COCKPIT ASSEMBLY - Center * PAN ASSEMBLY - Upper center * * PAN - Outer * * PAN - Inner * CHANNEL - Left front window, top * FRAME ASSEMBLY - Fuselage, Sta * * CHANNEL - Fuselage frame, left * * CHANNEL - Fuselage frame, right * * CHANNEL - Splice plate * PAN ASSEMBLY - Side * * PAN - Inner * * PAN - Outer * JAMB - Door, forward * CHANNEL - Support * CHANNEL - Upper center cockpit, left * CHANNEL- Upper center cockpit, right *CHANNEL- Upper center fuselage, left * CHANNEL- Upper center fuselage, right * DOUBLER - Antenna * FRAME ASSEMBLY - Canted, fuselage, Sta * * CHANNEL - Left * * CHANNEL - Right * CHANNEL - Upper cockpit * PLATE - Door latch * PLATE ASSEMBLY - Door latch * CHANNEL - Door latch * CLIP - Door latch * CHANNEL - Door frame splice BOLT - Eye, upper door hinge attachment (AN44-17A) W WASHER - (AN L) W NUT - (MS C) BUSHING - Upper door hinge BOLT - Eye, lower door hinge attachment (AN44-17A) W WASHER - (AN L) W NUT - (MS C) BUSHING - Lower door hinge FRAME ASSEMBLY - Fuselage, Sta , upper * CHANNEL - Upper frame, left * CHANNEL - Upper frame, right * CHANNEL - Splice plate LONGERON - Upper center cockpit, left LONGERON - Upper center cockpit, right CHANNEL- Upper center cockpit, left CHANNEL- Upper center cockpit, right CHANNEL- Upper center cockpit, left CHANNEL- Upper center cockpit, right HAT ASSEMBLY - Windshield A HAT ASSEMBLY - Windshield B * BRACKET - Windshield bow, left B * BRACKET - Windshield bow, right CHANNEL - Upper cockpit, rear, left CHANNEL - Upper cockpit, rear, right DOUBLER - Shoulder harness, rear LOOP ASSEMBLY - Door latch PLATE - Door latch 1 FUSELAGE UPPER CENTER COCKPIT ASSEMBLY Serial s Affected When ordering, always specify, Description, and Serial of Aircraft REVISED: NOVEMBER B15

40 FUSELAGE UPPER CENTER COCKPIT ASSEMBLY Figure and Index PIPER PARTS CATALOG Code Nomenclature No. Req. SECTION II Fuselage Group Serial s Affected CHANNEL- Upper center cockpit, left CHANNEL- Upper center cockpit, right CHANNEL- Upper center cockpit, left CHANNEL - Upper center cockpit, right STRINGER - Upper center cockpit, left STRINGER - Upper center cockpit, right GUSSET - Upper center cockpit, left GUSSET - Upper center cockpit, right STIFFENER - Left side, rear SUPPORT - Left PAN ASSEMBLY - Lower, upper cockpit * PAN - Inboard * PAN - Outboard * ANGLE ASSEMBLY - Door holder * PLATE - Door latch RETAINER - Windshield, left, upper A RETAINER - Windshield, left, upper RETAINER - Windshield, left, lower A RETAINER - Windshield, left, lower RETAINER - Windshield, right, upper A RETAINER - Windshield, right, upper RETAINER - Windshield, right, lower A RETAINER - Windshield, right, lower WEB - Upper center fuselage, left CHANNEL - Fuselage rear, left CHANNEL - Baggage door frame, top, inner CHANNEL - Baggage door frame, top, outer CHANNEL - Baggage door frame, front GUSSET - Baggage door frame, top, rear GUSSET - Baggage door frame, top, front GUSSET - Baggage door frame, bottom, front CHANNEL - Right door, front, Sta CHANNEL - Support, left CHANNEL - Support, right ANGLE - Support, left ANGLE - Support, right ANGLE - Support, left HINGE HALF - Baggage door GUSSET - Baggage door frame, bottom, rear CHANNEL - Upper cockpit, left CHANNEL - Upper cockpit, right DOUBLER - Shoulder harness, left DOUBLER - Shoulder harness, right GUSSET - Headliner attachment, left GUSSET - Headliner attachment, right 1 When ordering, always specify, Description, and Serial of Aircraft REVISED: NOVEMBER B16

41 Figure 10. Fuselage Lower Forward Cockpit Assembly INTERIM REVISION: MARCH B17

42 CODE EXPLANATIONS FOR FIGURE 10 A - Used if air conditioning is installed. B - See Figure 11 for component parts. C - See latest revision of Piper Service Bulletin 977. INTERIM REVISION: MARCH B18

43 SECTION II Fuselage Group Figure and Index PIPER PARTS CATALOG Code Nomenclature No. Req COCKPIT ASSEMBLY - Lower * HAT ASSEMBLY - Inboard * * HAT * * FAIRING - Front A * * FAIRING - Front, right * * FAIRING - Rear , * HAT ASSEMBLY - Outboard, left * HAT ASSEMBLY - Outboard, right * * HAT - Front, left * * HAT - Front, right * * HAT - Rear, left * * HAT - Rear, right * * FAIRING Center, left * * FAIRING Center, right * * FAIRING Rear, left and right * * FAIRING Front, left * * FAIRING - Front, right * FITTING - Engine, lower, left * FITTING - Engine, lower, right * FRAME ASSEMBLY - Fuselage. Sta * STRINGER - Rear of spar box, left * STRINGER - Rear of spar box, right * LONGERON - Lower cockpit, left * LONGERON - Lower cockpit. right * GUSSET - Lower cockpit, left * GUSSET - Lower cockpit, right * BRACKET ASSEMBLY - Pulley mounting * CHANNEL - Lower cockpit, left * CHANNEL - Lower cockpit, right * BRACKET - Lower cockpit, left * BRACKET - Lower cockpit, right * PLATE ASSEMBLY - Tunnel * HAT ASSEMBLY - Seat belt attachment, left * HAT ASSEMBLY - Seat belt attachment, right * BRACKET - Seat belt attachment, left * BRACKET - Seat belt attachment, right * BRACKET - Seat belt attachment * BOX ASSEMBLY - Spar, lower cockpit * * CHANNEL - Spar box. top * * CHANNEL - Spar box, bottom * * WEB - Spar box, front * * WEB - Spar box, rear * * BRACKET - Flap return spring * * CHANNEL - Spar box, right * * CHANNEL - Spar box, left * * CHANNEL - Spar box, left * * CHANNEL - Spar box, right * SUPPORT - Rear seat bottom, left * SUPPORT - Rear seat bottom, right * SUPPORT - Rear seat bottom. left * SUPPORT - Rear seat bottom, right * PLATE - Flap torque tube support. left * PLATE - Flap torque tube support, right * SUPPORT - Torque shaft, center * FITTING - Flap torque tube assembly, left * FITTING - Flap torque tube assembly, right 1 FUSELAGE LOWER FORWARD COCKPIT ASSEMBLY Serial s Affected When ordering, always specify, Description, and Serial of Aircraft REVISED: NOVEMBER B19

44 FUSELAGE LOWER FORWARD COCKPIT ASSEMBLY Figure and Index PIPER PARTS CATALOG Code Nomenclature No. Req. SECTION II Fuselage Group Serial s Affected * CHANNEL - Tunnel, side, left * CHANNEL - Tunnel, side, right * CHANNEL - Tunnel, side extension, left * CHANNEL - Tunnel, side extension, right * PLATE - Tunnel, top front * CHANNEL - Lower cockpit, left * CHANNEL - Lower cockpit, right * CHANNEL - Lower cockpit, left * CHANNEL - Lower cockpit, right * ANGLE - Cockpit floor, left * ANGLE - Cockpit floor, right * CHANNEL - Lower cockpit * ANGLE - Tunnel, heat duct * BRACKET - Pulley, top and bottom * STIFFENER - Lower cockpit, right * STIFFENER - Lower cockpit, left W * BOLT - Top forward (AN3-10A) W * BOLT - Bottom forward and rear (AN3-5A) * WASHER - (AN960-D10) W * NUT - (MS C) * BOLT - (MS ) * WASHER - (AN960-D10) W * NUT - (MS C) * BOLT - (MS ) * WASHER - (AN960-D10) W * NUT - (MS C) B * LOWER COCKPIT ASSEMBLY - Aft * CHANNEL - Sta , left * CHANNEL - Sta , right * DOUBLER ASSEMBLY - Transponder antenna access * PLATE - Transponder antenna access * ZEE ASSEMBLY - Tunnel PLATE - Tunnel, top, center rear PLATE - Tunnel, top, center front PLATE - Tunnel, top rear FLOORBOARD FLOORBOARD - Left FLOORBOARD - Right BRACKET ASSEMBLY - Rudder pedal stop, left BRACKET ASSEMBLY - Rudder pedal stop, right 1 When ordering, always specify, Description, and Serial of Aircraft INTERIM REVISION: MARCH B20

45 Figure 11. Fuselage Lower Aft Cockpit Assembly REVISED: NOVEMBER B21

46 CODE EXPLANATIONS FOR FIGURE 11 A - See latest revision of Piper Service Bulletin 977. INTERIM REVISION: MARCH B22

47 SECTION II Fuselage Group Figure and Index PIPER PARTS CATALOG Code Nomenclature FUSELAGE LOWER AFT COCKPIT ASSEMBLY LOWER COCKPIT ASSEMBLY - Aft * CHANNEL - Baggage compartment, right * STRINGER ASSEMBLY - Left * CHANNEL - Right * HAT - Baggage floor * FLOOR - Baggage compartment * FRAME ASSEMBLY - Lower, Sta * * CHANNEL - Lower cockpit * * FITTING - Lower cockpit, left * * FITTING - Lower cockpit, right * * BRACKET - Lower cockpit, left * * BRACKET - Lower cockpit, right * * BRACKET - Rear seat belt support, left * * BRACKET - Rear seat belt support, right * * DOUBLER - Seat belt attachment * BRACKET - Baggage compartment * BRACKET - Baggage compartment, left * BRACKET - Baggage compartment, right * BRACKET - Baggage compartment, right * DOUBLER ASSEMBLY - Step * CHANNEL - Seat belt attachment * DOUBLER - Baggage compartment, left * DOUBLER - Baggage compartment, right ANGLE - Lower cockpit to incl. No. Req. Serial s Affected When ordering, always specify, Description, and Serial of Aircraft INTERIM REVISION: MARCH B23

48 1B24 INTENTIONALLY LEFT BLANK

49 Figure 12. Fuselage Aft Assembly REVISED: NOVEMBER C1

50 CODE EXPLANATIONS FOR FIGURE 12 A - Used if air conditioning is installed. B - When ordering, specify with or without provisions for air conditioning. C - These parts must be ordered from Service Spares Department, Piper Aircraft, Lock Haven, Penna. REVISED: NOVEMBER C2

51 SECTION II Fuselage Group Figure and Index PIPER PARTS CATALOG Code Nomenclature DRAWING - Fuselage Assembly, Aft Section No. Req. FUSELAGE AFT SECTION Serial s Affected B FUSELAGE ASSEMBLY - Aft section * SKIN - Upper * SKIN ASSEMBLY - Side, left * SKIN ASSEMBLY - Side, right A * SKIN ASSEMBLY - Side, left A * SKIN ASSEMBLY - Side, right A * * LOUVER - Air conditioning exhaust, left A * * LOUVER - Air conditioning exhaust, right * SKIN - Lower side, left * SKIN - Lower side, right * SKIN ASSEMBLY - Lower center A * SKIN ASSEMBLY - Lower center * BULKHEAD ASSEMBLY - Fuselage, Sta * * FAIRLEAD * CHANNEL - Baggage door, right * DOUBLER - Antenna mount, forward * DOUBLER - Antenna mount, aft * BULKHEAD ASSEMBLY - Fuselage, Sta * * FAIRLEAD * BULKHEAD ASSEMBLY - Fuselage, Sta * * BRACKET - Stabilator trim * * FITTING - Frame, Sta * * DOUBLER - Frame, top, Sta * BULKHEAD ASSEMBLY - Fuselage, Sta * STRINGER ASSEMBLY - Hat section * * BRACKET - Stabilator pulley, left * * BRACKET - Stabilator pulley, right * STRINGER ASSEMBLY - Hat section * * BRACKET - Stabilator pulley, left * * BRACKET - Stabilator pulley, right A * BRACKET ASSEMBLY - Condenser door bellcrank, left A * BRACKET ASSEMBLY - Condenser door bellcrank, right A * BRACKET - Motor mount, condenser actuator A * BRACKET ASSEMBLY - Motor support A * BRACKET - Brace A * BRACE - Condenser frame, left A * BRACE - Condenser frame, right A * PANEL ASSEMBLY - Fairlead A * VENT ASSEMBLY - Evaporator * SPACER - Tail skid * VENT ASSEMBLY - Battery * SKID ASSEMBLY - Tail A * ZEE ASSEMBLY - Condenser door frame * BOLT - (NAS464P3A-4) W * WASHER - (AN960-10) W * WASHER - (AN960-10L) W * NUT - (MS21045-L3) * BOLT - (NAS464P3A-5) W * WASHER - (AN960-10) W * WASHER - (AN960-10L) W * NUT - (MS21045-L3) A * GUSSET - Condenser frame, aft, left A * GUSSET - Condenser frame, aft, right * STRINGER - Top, Sta. 191 to Sta * STRINGER - Top, Sta. 156 to Sta When ordering, always specify, Description, and Serial of Aircraft REVISED: NOVEMBER C3