FARM AND INDUSTRIAL TYRES

Transcription

1 Dealer stamp FARM AND INDUSTRIAL TYRES Goodyear Luxembourg Tires S.A. Av. Gordon Smith L-77 Colmar-Berg Telephone Telefax (352) (352) Produced by Goodyear Europe 124/26/LUX ENG Product range Tyre size availability Load and inflation tables Size conversion information Safety, service and maintenance advice

2 Index 2 Radial Agricultural Traction Drive 3 Introduction Goodyear maintains a wide product offering of agricultural and industrial tyres in radial and bias construction for the original equipment and replacement market. A full range global supplier for over years Goodyear has a long tradition and a wealth of tyre expertise in the agricultural and industrial industry. Backed by specially trained technicians and engineers, Goodyear s research and development continues to develop and create new lines of innovative farm and industrial tyres. Goodyear tyres meet the demanding performance requirements of sophisticated machinery manufacturers, machine dealers, contractors, farmers and end-users. Goodyear understands its valued customers and is committed to delivering total customer satisfaction. This brochure includes product and technical information on current and new farm and industrial tyre ranges, capable of coping with the most demanding and variable work conditions. Content Matrix Radial Agricultural Traction Drive page Optitrac DT page 12 DT page 17 DT page 2 DT page 23 DT page 26 DT page 28 R Page DT page 31 Bias Agricultural Traction Drive page 32 Bias Front Free Rolling page 34 Radial and Bias Implement page 36 Radial Industrial Traction Drive page 39 Bias Industrial Traction Drive page 44 Safety, Service and Maintenance Advice page 48 Farm Tyre Application Map TRACTION DRIVE FREE ROLLING FRONT TRAILER & IMPLEMENT Industrial Tyre Application Map TRACTION DRIVE Tractors Harvesters Sprayers Tractors Non Driven Front Axles Back-hoe Loaders Telescopic Handlers Compact Wheel Loaders Skid Steer Soft Soil Hard Soil Radial Narrow DT8 Standard STR Standard DT86 Wide DT812 Super Wide DT818 Volume DT824 Super Volume DT8 High Volume R+ Volume DT822 Bias Standard Special Sure Grip All Service Traction Sure Grip All Weather Standard Bias Super Rib Dyna Rib Multi Rib Front Rib Standard Bias Laborer Radial FS24 Bias AM Implement Laborer Super Flotation Industrial Rib Traction Implement Sure Grip Lug Radial IT52 Bias Sure Grip Implement Sure Grip Traction Implement Industrial Sure Grip Industrial Sure Grip Tractor IT5 All Weather Radial IT5 Bias Sure Grip Industrial Tractor Industrial Implement Sure Grip Lug Traction Implement Bias IT323 SS Sure Grip Lug

3 Traction Drive Radial Farm Tyres 4 Radial Agricultural Traction Drive 5 NARROW STANDARD KM/H STANDARD KM/H WIDE SUPER WIDE VOLUME SUPER VOLUME HIGH VOLUME Page 12 Page 14 Page 17 Page 2 Page 23 Page 26 Page 28 Page DT8 Super Traction Radial DT86 DT812 DT818 DT824 DT8 R+ Size LI/SS OD* RC* Size LI/SS OD* RC* Size LI/SS OD* RC* Size LI/SS OD* RC* Size LI/SS OD* RC* Size LI/SS OD* RC* Size LI/SS OD* RC* Size LI/SS OD* RC* 27/75R32 129A8 144A /8R36 134A8 148A /95R36 139A8 153A /9R38 139A8/B /9R46 142A8 156A /9R42 139A8/B /85R 142A8 156A /9R46 148A8/B 153A8/B /9R 149A8 163A /9R 148A8/B /9R46 149A8B /9R54 149A8/B * Outside Diameter OD (mm) is design dimension, Rolling Circumference RC (mm). LI = Load Index. SS = Symbol. See Page. 7.R16 2A8 99B R18 4A8 1B /8R2 6A8 3B R2 111A8 8B R2 116A8 113B R24 7A8 4B R24 114A8 111B R24 119A8 116B R24 121A8 118B/ 128A8 1B R24 128A8 1B R24 126A8 123B R24 134A8 131B R26 127A8 124B R26 135A8 132B R26 1A8 137B R28 116A8 113B R28 121A8 118B R28 123A8 12B R28 128A8 1B R28 136A8 133B R 129A8 126B R 137A8 134B R 142A8 139B R32 122A8 119B R34 139A8 136B R34 144A8 141B R36 124A8 121B R36 127A8 124B R38 128A8 1B R38 134A8 131B R38 141A8 138B R38 146A8 143B R38 153A8 1B R42 148A8 148B R42 155A8 152B /85R2 112A8/B /85R24 9A8/B /85R24 115A8/B /85R24 122A8/B /85R24 1A8/B 1A8/B /85R24 131A8/B /85R24 137A8/B /85R26** 143A8/B /85R28 118A8/B /85R28 124A8/B /85R28 127A8/B /85R28 133A8/B /85R28 139A8/B 144A8/B /85R 135A8/B /85R 1A8/B /85R 145A8/B /85R34 142A8/B /85R34 147A8/B /85R36 128A8/B /85R36 132A8/B /85R38 133A8/B /85R38 144A8/B /85R38 149A8/B /85R38 155A8/B /85R42 1A8/B /85R42 157A8/B ** In preparation dimensions estimated. (1) In DT8. 2/7R16 94A8/B /7R16 4A8/B /7R16 9A8/B /7R16 112A8/B /7R18 114A8/B /7R2 113A8/B /7R2 116A8/B /7R2 1A8/B /7R2 123A8/B /7R2 129A8/B /7R2 (1) 122A8/119B /7R24 116A8/B /7R24 122A8/B /7R24 1A8/B /7R24 1A8/B 136A8/B /7R24 138A8/B /7R28 1A8/B /7R28 127A8/B /7R28 133A8/B 139A8/B /7R28 1A8/B 145A8/B /7R (1) 134A8/131B /7R 141A8/B 147D /7R34 143A8/B /7R34 148A8/B /7R38 145A8/B /7R38 1A8/B /7R38 155A8/B /7R42 166A8/B /65R16 1A8/B /65R16 6A8/B /65R16 1A8/B /65R16 114A8/B 87 /65R18 116A8/B /65R18 122A8/B /65R2 124A8/B /65R2 135A8/B /65R2 138A8/B /65R24 126A8/B /65R24 128A8/B /65R24 133A8/B /65R24 1A8/B 146A8/B /65R28 131A8/B /65R28 136A8/B /65R28 142A8/B /65R 143A8/B /65R34 145A8/B /65R34 151A8/B /65R38 147A8/B /65R38 153A8/B /65R38 157A8/B /65R42 165A8/B /65R28 147A8/B 154A8/B /75R28 154A8/B /7R28 159A8/B /75R26 166A8/B /7R 152A8/B /75R34 157A8/B /75R 163A8/B /75R34 (2) 17A8 167B 188 6/75R32 (3) 172A8 169B /75R34 (2) 162A8 159B /65R32 (3) 172A8 169B /75R34 178A8/B /75R38 169A8/B /7R38 166A8/B 171A8/B /7R42 173A8/B /85R38 173A8/B (2) In DT82. (3) In DT822. 7/R26 157A8/B /55R26 16A8/B LR26 165A8 162B /65R26 (2) 166A8/163B /65R 165A8/B 17A8/B /65R32 172A8/B /55R32 173A8 17B /6R32 176A8 173B /R42 168A8/B /7R32 175A8/B /7R38 173A8/B /75R32 178A8/B /65R28 142D/145A /75R28 149D/152A /7R** 152D/155A /75R 163D/166A /65R34** 161D/164A /75R34 162D/165A /75R38 169D/172A /85R38 173D/176A /75R42** 175D/178A ** In preparation dimensions estimated.

4 Traction Drive Bias Farm Tyres Free Rolling Front & Trailer Implement 6 R - 1W Radial Agricultural Traction Drive 7 Page 32 Page 32 Page 33 Page 33 Page 34 Page 34 Page 35 Page 35 Traction Sure Grip Dyna Torque II Sure Grip All Service All Weather Traction Dyna Rib Super Rib Front Rib Multi Rib Size PR Size PR Size PR Size PR Size PR Size PR Size PR Size PR , , , , L ,12 14L16.1 Page Laborer , Page 36 Sure Grip Lug , Page 36 Industrial Rib Page 36 Super Flotation Size PR Size PR Size PR Size PR 11L L16 12 / / /65-16, / , 16 Page 36 AM Implement* Page 36 Traction Implement Page 38 FS24 Size PR Size PR Size PR / / ,, 12, / ,, 12, 14, / / /55-17,14 19./ A6.5/ / , 16 5/ /65R18 148A8 /7R2 158A8 *Tubeless

5 Radial Industrial Tyres Bias Industrial Tyres 8 9 Page 41 Page Page 42 Page 33 Page 45 Page 45 IT5 IT52 IT5 All Weather Traction Industrial Sure Grip & Industrial Sure Grip Tractor Sure Grip Implement Size LI/SS Size LI/SS Size LI/SS Size PR Size PR Size PR 445/7R24MPT 151G 32/8R18 134A8 3/8R18 136A8 /7R18 147A8 3/8R2 144A8 /7R2 149A8 42/75R2 16A8 /8R24 156A8 /8R24 162A8 4/8R24 154A8 46/7R24 152A8 /7R24 157A8 48/8R26 16A8 4/8R28 156A8 /7R28 159A8 32/8R18IND 3/8R18IND /7R18IND /7R2IND /7R24IND 4/8R24IND /7R24IND 48/8R26IND 4/8R28IND /7R28IND 134A8 136A8 147A8 149A8 158A8 154A8 157A8 16A8 156A8 159A , Page 46 Sure Grip Traction Implement.5-2 MPT MPT IND IND IND IND, IND Page 47 Sure Grip Industrial Tractor & Industrial Implement.5/ / /7-2, / , / , /85-28 Page 47 Sure Grip Lug Size PR Size PR Size PR IND IND IND 16.5/ / / /7-2 / IND 14 Page 47 Traction Implement Page 47 IT323 Size PR Size PR 5/ , ,

6 Radial Agricultural Traction Drive The OPTITRAC Radial Farm Tyre Line R - 1W Radial Agricultural Traction Drive 11 OPTITRAC Traction Drive Radial OPTITRAC Concept Same Rolling Circumference Narrow Standard Wide Super Wide Volume High Volume DT8 DT86 DT812 DT818 DT824 R+ DT8 Various Dia Narrow Standard Wide Super Wide Volume High Volume Super Volume Super Volume Footprint Latest generation compound and construction technology Increased load carrying capacity Impact resistant Optimised tyre and footprint shape Even pressure distribution Minimum soil compaction Force transmission Continuous helical lug curvature Enhanced ride comfort Even wear Outstanding traction Tuned asymmetric lug shape Improved traction Self-cleaning pattern Greater stability Premium tread depth Long tyre life Enhanced soil traction Modern sophisticated appearance Distinctive look and decoration Aggressive appearance Lug Shape DT8 DT86 DT812 DT818 DT824 R+ DT8 OPTITRAC R+ New Technologies Performance GOODYEAR OPTITRAC TRACTION DRIVE RADIAL DT8 DT86 DT812 DT818 DT824 R+ DT8 DT822 Row Crop Fruit Vineyard Tractor Transport (-HP) Grassland Tractor Traction (-2HP) Transport 65kph Preparation Tractor Traction (2-3HP) Transport 65kph Preparation Sprayers R+ technology uses enlarged tyre air volume, stronger materials and a different bead concept to increase OPTITRAC tyre performance: Stronger carcass material AERO TIE IN multilayer bead construction (used in Goodyear aircraft tyres) New compound materials 3 % more traction* 23% more load*.4 bar lower inflation to carry same load* Operating speeds up to 65 km/h* Fits regular rims *6/75R34 R+ compared with 6/65R38 OPTITRAC DT818. Harvesters (Beet, Potato, Bean) Combines, Forage Harvesters Winegrape Harvesters 1 2

7 OPTITRAC DT8 12 R 1W Radial Agricultural Traction Drive 13 Features & Benefits Narrow tyres for row crop application Narrow cross section: easy crop clearance Round shoulders: plant and soil conservation Deep lugs: traction and fast work rate Driving speeds: up to kmh Front and rear size combinations (Litres) (km/h) /9R 149A8 W A2 (W9,W11) 2 * 32/9R 148A8 W B 2 * Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. * Cyclic loads (except for slope angles exceeding 2%). OPTITRAC - DT8 (Litres) (km/h) /75R32 129A8 W A2 (W9, W) 2 * 27/8R36 134A8 W A2 (W9,W) 2 * 27/95R36 139A8 W A2 (W9,W) 2 * 27/9R46 142A8 W A2 (W9,W) 2 * 32/9R46 148A8 W B 2 * 38/9R46 149A8 W B (W13) 2 * 27/85R 142A8 W A2 (W9,W) 2 *

8 R 1W Radial Agricultural Traction Drive Super Traction Radial Balanced design features: all round field and road service Wide range of sizes: versatile vehicle fitment Deep lugs for traction: better productivity Super Traction Radial (Litres) (km/h) (1.9) R16 7.R18 26/8R2 11.2R2 12.4R2 9.5R R R R24 2A8 99B 4A8 1B 6A8 3B 111A8 8B 116A8 113B 7A8 4B 114A8 111B 119A8 116B 121A8 118B 128A8 1B 5.5 (6) 5.5 (6) W8 (W7,W9,9) W (W9,9) W11 (W9,9,W,11) W8 (W7) W (W9) W11 (W9,W) W12 (W11) * * * * * * * * * * (14) (157) (1635) (185) (1875) (27) (1465) (162) (177) (196) (2) (2245) (2175) () (Litres) (km/h) (1.9) R R R R R26 28LR R R R R R R 16.9R 18.4R 12.4R32 8/65R32 126A8 123B 134A8 131B 127A8 124B 135A8 132B 1A8 137B 165A8 162B 116A8 113B 121A8 118B 123A8 12B 128A8 1B 136A8 133B 129A8 126B 137A8 134B 142A8 139B 122A8 119B 167A8 164B 172A8 169B W13 (W11,W12) W15L W13 (W11,W12) W15L W16L (W15L) DWA (DW23A) W (W9) W11 (W9,W) W12 (W11) W13 (W11,W12) W15L W13 (W11,W12) W15L W16L (W15L) W11 (W9,W) DW27 (DH27) (DWA) * * * * * * * * * * * * * * * * * () (28) (318) (35) (26) (289) (327) (365) (37) (41) (1875) (275) (2175) (2395) (23) (6) (27) (2975) (336) (37) (2775) (55) (34) (38) (39) (4375) (22) (248) (8175) (92) Features & Benefits

9 Super Traction Radial OPTITRAC DT86 16 R - 1W Radial Agricultural Traction Drive R - 1W Radial Agricultural Traction Drive 17 (Litres) (km/h) (1.9) Features & Benefits 16.9R R R R R R R R38 2.8R R42 2.8R42 139A8 136B 144A8 141B 124A8 121B 127A8 124B 128A8 1B 134A8 131B 141A8 138B 146A8 143B 153A8 1B 148A8 148B 155A8 152B W15L W16L (W15L) W11 (W9,W) W12 (W11) W12 (W11) W14L W15L W16L (W15L) W18L (W16L) W16L W18L (W16L) * * * * * * * * * * * Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. Where available, the DW-B rim contour is recommended as an alternative to the DW-A. * Cyclic loads (except for slope angles exceeding 2%) (3645) () (42) (4635) (2) (2645) (26) (289) (27) (2975) (318) (3515) (3865) (4265) (4455) (49) (5475) (635) (469) (517) (5815) (65) Premium standard tyre for versatile work OPTITRAC design concept: all-round performance Extensive size range: wide application Driving speeds: up to km/h Approved for tyre fitment by tractor manufacturers DT86 (Litres) (km/h) (1.9) /85R2 112A8 W (11.2R2) 112B (W9) /85R24 9A8 W8, (W7) (9.5R24) 9B (W9) /85R24 115A8 W (11.2R24) 115B (W9) 32/85R24 122A8 W11 (12.4R24) 122B (W) /85R24 1A8 W (13.6R24) 1B (W11) 3/85R24 1A8 W12 (13.6R24) 1B (W11) (167) * (18) (1535) * (17) (18) * (2) (2235) * (248) (246) * (27) *

10 OPTITRAC DT86 18 R 1W Radial Agricultural Traction Drive 19 (Litres) (km/h) (1.9) /85R24 131A8 W (14.9R24) 131B (W11,W12) 42/85R24 137A8 W15L (16.9R24) 137B 46/85R26** 143A8 W16L (18.4R26) 143B W15L 28/85R28 118A8 W (11.2R28) 118B (W9) 32/85R28 124A8 W (12.4R28) 124B (W) 3/85R28 127A8 W (13.6R28) 127B (W11) 38/85R28 133A8 W13 (14.9R28) 133B (W11,W12) /85R28 139A8 W15L (16.9R28) 139B 42/85R28 144A8 W15L (16.9R28) 144B 38/85R 135A8 W13 (14.9R) 135B (W11,W12) /85R 1A8 W15L (16.9R) 1B 46/85R 145A8 W16L (18.4R) 145B (W15L) 42/85R34 142A8 W15L (16.9R34) 142B ** In preparation dimensions estimated (29) * (32) (34) * (38) * (197) * (218) (2385) * (2645) (26) * (2895) (75) * (35) (36) * (2) * (32) * (36) (37) * (4135) (43) * (4795) (3955) * (4385) 45 (Litres) (km/h) (1.9) /85R34 147A8 W16L (18.4R34) 147B (W15L) 32/85R36 128A8 W11 (12.4R36) 128B (W) /85R36 132A8 W12 (13.6R36) 132B (W11) /85R38 133A8 W12 (13.6R38) 133B (W11) /85R38 144A8 W15L (16.9R38) 144B /85R38 149A8 W16L (18.4R38) 149B (W15L) 52/85R38 155A8 DW18L (2.8R38) 155B (DW16L) 46/85R42 1A8 W16L B (W15L) 52/85R42 157A8 DW18L (2.8R42) 157B (DW16L) Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. * Cyclic loads (except for slope angles exceeding 2%) (4585) * (8) (2685) * (2975) (298) * (35) (7) * (3) (4175) * (46) (4845) * (537) (578) * (64) (4995) * (5545) (61) * (68) 715

11 OPTITRAC DT812 2 R 1W Radial Agricultural Traction Drive 21 Features & Benefits Wide tyre for greater traction Deep tread: long life Identical load capacity at and km/h: high productivity Approved by leading tractor manufacturers OPTITRAC DT812 (Litres) (km/h) (1.9) /7R16 94A8 W B (W7) 2/7R16 4A8 W B (W9) 26/7R16 9A8 W B (W9) 28/7R16 112A8 W B (W8,W) 28/7R18 114A8 W B (W8,W) 26/7R2 113A8 W B (W9) 28/7R2 116A8 W B (W8,W) * * * * * * * (Litres) (km/h) (1.9) /7R2 1A8 W B (W8,W) 32/7R2 123A8 W B (W9,W11) 36/7R2 129A8 W B (W,W12) 38/7R2(1) 122A8 W12 78** 38** 327** 482** B (W11,W13) 32/7R24 116A8 W B (W9,W11) 36/7R24 122A8 W B (W,W12) 38/7R24 1A8 W B (W11,W13) 42/7R24 1A8 W B (W12,W14L) 42/7R24 136A8 W B (W12,W14L) 48/7R24 138A8 W15L B (W14L,W16L) 36/7R28 1A8 W B (W,W12) 38/7R28 127A8 W12 127B (W11,W13) /7R28 133A8 W B (W12, W14L) (158) * (17) * * (22) * (248) (1865) * (265) (22) * (248) (246) * (27) (2835) * (31) * (352) * (39) (246) * (27) (26) * (2895) (75) * (35) 3

12 OPTITRAC DT812 OPTITRAC DT R 1W Radial Agricultural Traction Drive R 1W Radial Agricultural Traction Drive 23 (Litres) (km/h) (1.9) /7R28 139A8 W B (W12,W14L) 48/7R28 1A8 W15L B (W14L,W16L) 48/7R28 145A8 W15L B (W14L,W16L) 42/7R(1) 134A8 W B (W12,W14L) 48/7R 141A8 W15L B (W14L,W16L) 48/7R 147D W15L (W14L,W16L) 48/7R34 143A8 W15L B (W14L,W16L) 52/7R34 148A8 W16L B (W15L,W18L) 48/7R38 145A8 W15L B (W14L,W16L) 52/7R38 1A8 W16L B (W15L,W18L) 58/7R38 155A8 W18L B 62/7R42 166A8 DW2A B (W18L) (DW21A) (1) In DT8 Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. Where available the DW-B rim contour is recommended as an alternative to the DW-A. * Cyclic loads (except for slope angles exceeding 2%) * * * (318) * (35) (38) * (426) * (65) * (45) (47) * (5) (43) * (4795) (4995) * (5535) (578) * (64) * Features & Benefits Super Wide tyres for great traction at low pressure Low pressure: soil conservation Long wearing tread: lower operating cost Identical load capacity at and km/h: high productivity Approved by leading tractor manufacturers DT818 (Litres) (km/h) (1.9) /65R16 1A8 W B (W8L,W9) 26/65R16 6A8 W B (W8L,W9) 28/65R16 1A8 W B (W8,W8L,W) /65R16 114A8 W B (W) /65R18 116A8 W B (W) 3/65R18 122A8 W B (W,W12) 3/65R2 124A8 W B (W,W12) * * * * * * *

13 OPTITRAC DT R 1W Radial Agricultural Traction Drive (Litres) (km/h) (1.9) /65R2 135A8 W B (W11,W12) 4/65R2 138A8 W14L B (W13) 42/65R24 126A8 W B (W11,W12) 4/65R24 128A8 W14L B (W13) 48/65R24 133A8 W15L B 5/65R24 1A8 W16L B (W15L, W18L) 5/65R24 146A8 W16L B (W15L, W18L) 4/65R28 131A8 W14L B (W13) 48/65R28 136A8 W15L B 5/65R28 142A8 W16L B (W15L, W18L) 5/65R 143A8 W16L B (W15L, W18L) 5/65R34 145A8 W16L B (W15L, W18L) 6/65R34 151A8 DW2A B (W18L) * * (35) * (28) (2685) * (297) (7) * (3395) (37) * (412) * (295) * (3215) (33) * (369) (39) * (437) (6) * (4495) (43) * (478) (51) * (5685) 5865 (Litres) (km/h) (1.9) /65R38 147A8 W16L B (W15L, W18L) 6/65R38 153A8 DW2A 153B (W18L) /65R38 157A8 DW2A B (W18L) 6/65R42 165A8 DW2A B (W18L) Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. Where available the DW-B rim contour is recommended as an alternative to the DW-A. * Cyclic loads (except for slope angles exceeding 2%) (4585) * (7) (54) * (615) (6145) * (679) *

14 OPTITRAC DT R 1W Radial Agricultural Traction Drive 27 Features & Benefits Volume tyre for high power tractors and harvesters Small rim diameter and large air volume: enhanced traction at low pressure Longer wearing tread: lower operating cost Identical load capacity at and km/h: high productivity DT824 Size LI/SS Recc OD SW SWRC RCSLR SLR Contents Contents Max Max Load (kg)/inflation Load (kg)/inflation Pressure (bar) Pressure (bar) (Litres) (km/h) (km/h) (1.9) /75R26 166A8 DW2A B 5/75R28 154A8 W18L B (W16L) 6/65R28 147A8 DW2A B (W18L) 6/65R28 154A8 DW2A B (W18L) 62/7R28 159A8 DW2A B 6/7R 152A8 DW2A B (W18L) 62/75R 163A8 DW2A B * * (4585) * (75) * * (5295) * (5865) * Size LI/SS Recc OD SW SWRC RCSLR SLR Contents Contents Max Max Load (kg)/inflation Load (kg)/inflation Pressure (bar) Pressure (bar) (Litres) (km/h) (km/h) (1.9) /75R34(1) 17A8 DW2A B (W18L) (DW21A) 6/75R34(1) 162A8 DW21A B (DW2A) 7/75R34 178A8 DW23A B 6/75R38 169A8 DW21A B (DW2A) (DW23A) 6/85R38 173A8 DW21A B (DW2A) (DW23A) 7/7R38 166A8 DW23A B 7/7R38 171A8 DW23A B 7/7R42 173A8 DW23A B Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. Where available the DW-B rim contour is recommended as an alternative to the DW-A. * Cyclic loads (except for slope angles exceeding 2%). (1) In DT * (71) * (7835) * * * (795) * (876) * *

15 OPTITRAC DT8 28 R 1W Radial Agricultural Traction Drive 29 Features & Benefits Super-Volume tyre for high loads and flotation Strong carcass: high load carrying capacity and stability Size combinations for front and rear fitment Deep curved lug design: outstanding traction Designed to keep total tractor width within 3 metres. DT8 Size LI/SS Recc OD SW RC SLR Contents Max Load Load (kg)/inflation Pressure Pressure (bar) (bar) (Litres) (km/h) (1.9) /R26 157A8 DWA B (DW23A) 7/55R26 16A8 DWA B (DW23A) 7/65R26(1) 166A8 DWA B (DW23A) 7/65R 165A8 DW23A B 7/65R 17A8 DW23A B * * * * * Size LI/SS Recc OD SW RC SLR Contents Max Load (kg)/inflation Load (kg)/inflation Pressure Pressure (bar) (bar) (Litres) (km/h) (1.9) /65R32 172A8 DW27A B (DWA) 8/7R32 175A8 DW27A 175B (DWA) /75R32 178A8 DW27A 178B (DWA) /55R32 H 173A8 DWA B (DW27A) 9/55R32 T 173A8 DWA B (DW27A) 9/6R32 H 176A8 DWA B (DW27A) 9/6R32 T 176A8 DWA B (DW27A) 8/7R38 173A8 DWA B (DW23A) (MW23A) 9/R42 168A8 DW28A B (MW28A) Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. Where available the DW-B rim contour is recommended as an alternative to the DW-A. * Cyclic loads (except for slope angles exceeding 2%). H = Harvester application, T = Tractor application * * * * * (9675) * (635) (8335) * (9175) 952 (1) In DT82

16 OPTITRAC R+ OPTITRAC DT822 R 1W Radial Agricultural Traction Drive R 1W Radial Agricultural Traction Drive 31 OPTITRAC R+ Features & Benefits Stronger carcass materials AERO-TIE IN multi-layer bead construction New compound materials Fits standard rims See page 11 for full details. DT822 Features & Benefits Strong carcass: durability and stability Deep tread: excellent traction Lug Pitch variation: superb comfort Longer wearing tread: lower operating cost POPULAR COMBINATIONS FRONT REAR 6/75R34 6/75R38 6/85R38 5/65R28 R+ 5/75R28 R+ R+ R+ 62/75R R+ R+ OPTITRAC R+ DT822 Size LI/SS Recc OD SW RC SLR Contents Max Load Load (kg)/inflation Pressure Pressure (bar) (bar) (Litres) 1.8 (km/h) (1.9) (1.9) /65R28 142D W18L A8 (W16L) (39) 5/75R28 149D W18L A8 (W16L) (4845) 62/75R 163D DW2A A8 (DW21A) /75R34 162D DW21A A8 (DW2A) (DW23A) (785) 6/75R38 169D DW21A A8 (DW2A) (DW23A) /85R38 173D DW21A A8 (DW2A) (DW23A) Size LI/SS Recc OD SW RC SLR Contents Max Load Load (kg)/inflation Pressure Pressure (bar) (bar) (Litres) 1.8 (km/h) (1.9) 1.8(1.9) /75R32 172A8 DW21A B (DW2A) * /65R32 172A8 DW27A B (DWA, (DH27) * Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. Where available, the DW-B rim contour is recommended as an alternative to the DW-A. * Cyclic loads (except for slope angles exceeding 2%). `

17 Bias Agricultural Traction Drive 32 R1/R3 Bias Agricultural Traction Drive 33 Traction Sure Grip Dyna Torque II Sure Grip All Service All Weather Sure Grip All Service For low and medium power tractors, as well as certain harvesters For harvesters Traction Sure Grip For low and medium power tractors for road and field use For soil and turf preservation For industrial equipment such as compactors Size PR LI Recc. OD SW RC SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) W (W11) W16L (W15L) Dyna Torque II Size PR LI Recc. OD SW RC SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) W16L (W15L) (6-137) (8-142) (-146) (12-1) W16L (W15L) (6-139) (8-143) (-149) (12-152) W18L (W16L) (8-148) (-152) (14-159) Size PR LI Recc. OD SW RC SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) W (W7) W (W6) W (W7) W (W9) W (W9, W) W (W11,W12) W (W9) W (W9, W) W (W11) W (W11,W12) W (W11,W12) W (W11,W12) W15L W15L W16L (W15L) W16L (W15L) W (W9, W) W (W9, W) W (W11) W (W11) All Weather Traction Size PR LI Recc. OD SW RC SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) W11C W (W11,W12) W15L DW2A DW2A W (W11) Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. (LI): Figures between parentheses ( ) indicate (ply rating load index) of the tyre.

18 Bias Front Free Rolling 34 F 2 M/F 3 Bias Front Free Rolling 35 Dyna Rib Super Rib Front Rib Multi Rib Laborer Durable carcass and tough compounds for outstanding wear and durability High centre rib for maximum steering ability in soft soil service Long tread life in the field and over the road Rugged construction for industrial service A rugged performer in demanding applications Dyna Rib Front Rib Size PR LI Recc. OD SW SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) L LB (LB) W (W8L) WL (W8,W8L) 14L W11C Super Rib Size PR LI Recc. OD SW SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) D (4J) E (3.D,4J,4 1/2J) E (3.D,4.E) E (4.E,5K,5.F) E (4.E,5K,5.F,5.F) F (5.F,5K,6.F) F (5.F,5K,6.F) W (W7,W8L,6.F) W (W8L) WL (W8,W8L) F D E (4.E,5.F) E (4.E,5K,5.F,5.F) F (5.F) Size PR LI Recc. OD SW SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) E (3.D,4J,4 1/2J) E (3.D,4.E) E (4.E,5K,5.F) E (4.E,5K,5.F,5.F) F (5.F,5K,6.F) F (5.F,5K,6.F) F Multi Rib Size PR LI Recc. OD SW SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) WL (W8,W8L) Laborer Size PR LI Recc. OD SW SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) L LB (LB) 11L W8L, 8LB (LB,WL) Outside diameter (OD), section width (SW) are design dimensions in mm. data in bold print is recommended rim, other rim data indicated are authorised.

19 Bias Implement Tyres 36 I 1/I 2/I 3 Bias Implement 37 Super Flotation Sure Grip Lug For construction vehicles in variable conditions/uses Industrial Rib For non-driven axles of industrial machines Size PR LI Recc OD SW SLR Max Load (kg)/inflation Pressure (bar) (Authorised) (km/h) /65-16 FR 123 W DW 111 (W8L) /65-16 FR 14 1 W DW (W8L) /65-18 FR DW /65-18 FR DW AM Implement Super Flotation Large volume of air Minimal disturbance of furrow walls Good wear resistance AM Implement Versatile for road & field Good steering on hillsides Cut resistant carcass Traction Implement For vehicles requiring maximum stability (See Bias Industrial Traction Section for - Page 46). Laborer A rugged performer in demanding applications (See Bias Front Free Rolling Section for - Page 35). Size PR LI Recc OD SW SLR Max Load (kg)/inflation Pressure (bar) (Authorised) (km/h) FR DW /8-12 FR W DW 8 3 (7) / FR DW / FR DW / FR DW / FR DW / FR DW / FR DW / FR DW / FR DW / FR DW /75-16 FR DW 123 (9,W9,W11) /55-17 FR DW /45-17 FR 144A DW 131A /8-18 FR 131 W DW /8-18 FR W DW (11) /8-18 FR W DW (11) Sure Grip Lug Size PR LI Recc OD SW RC SLR Max Load (kg)/inflation Pressure (bar) (Authorised) (km/h) / FR DW FR = Free Rolling DW = Driven Wheel Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. Industrial Rib Size PR LI Recc OD SW SLR Max Load (kg)/inflation Pressure (bar) (Authorised) (km/h) / FR DW (11.75)

20 Radial Implement Radial Industrial Traction Drive 38 I 1 Radial Implement R 4 Radial Industrial Traction Drive 39 FS24 Features & Benefits Low rolling resistance Excellent protection against punctures provided by KEVLAR belt Smooth running on the road Long life Very good stability due to large contact surface with the ground Radial Industrial Tyres The Modern Efficient Choice More and more industrial tyre customers recognise and appreciate the advantages of fitting radial tyres over bias tyres. Goodyear has strongly supported this move to radial tyres by designing 2 modern radial industrial tyre lines IT52 and IT5. The IT52 with its modern reinforced lug design is ideally suited to extended wear operation on wet and soft soils where good traction is required. The 3 section block - lug pattern of the IT5 is very rugged and best suited for hard dry soils and for hard surfaces. The IT5 improves ride comfort and superior lateral tread stability. The IT52 and IT5 size range is continuously extended to cover a vast range of equipment and usages. Features & Benefits of Radial tyres FS24 Size LI/SS Recc OD SW SLR Contents Max Load (kg)/inflation Pressure (bar) (Litres) (km/h) /65R18 148FR FR DW DW /7R2 158FR FR DW (12SDC) DW (13SDC) (14,DW14L) Features Uniform ground pressure distribution Significantly lower rolling resistance Improved puncture resistance Better sidewall deflection Farm applications IT5 Hard Soil Grip and traction Stability Self cleaning Soft Soil Benefits Reduced tyre wear, longer treadlife, higher mileage Regular wear, lower vibration level, better comfort Less soil compaction, better flotation Better traction Lower fuel consumption Improved durability, more reliability in service Superior driving comfort SOFT SOIL IT52 Maximum traction on soft soil HARD SOIL IT5 Specialist for hard surfaces and tough conditions Wear resistance Steering Stability IT52 High speed stability Cut resistance Road comfort Industrial and construction applications Recommended Bias Size Radial Size LI/SS RC OD Availability 12.5/ /8R18 134A8 2, /8R18 136A8 3,11 1,3 15.5/7-18 /7R18 147A8 3,19 1, /8R2 144A8 3,16 1,55 16./7-2 /7R2 149A8 3,181 1, /75R2 16A8 3,384 1, / /7-24 /7R24 156A8 3,5 1, /8-24 /8R24 156A8 3,7 1,2 15.5/8-24 /8R24 162A8 3,7 1, /8R24 154A8 3,923 1, L-24 46/7R24 152A8 3,76 1, L-24 /7R24 157A8 3,917 1, /8R26 16A8 4,267 1, /8R28 156A8 4,2 1, L-28 /7R28 159A8 1,411 RC = Rolling Circumference (mm), OD = Outside diameter (mm). When refitting your equipment with different size tyres please check recommended rims, load pressure tables and technical details in the technical range brochure.

21 IT52 R 4 Radial Industrial Traction Drive 41 Features & Benefits Radial construction: longer tread life and better comfort Lug design: excellent soft ground traction Reinforced lugs: extra durability and tread life Wide size range: for small construction equipment and specialist agricultural machines IT52 (Litres) (km/h) /8R18 134A8 W (12.5/8-18) (W9,11, W11) * * /8R18 136A (12.5/8-18) (W, W11) (12) * * /7R18 147A (15.5/7-18) (12) (13.) (DW13) * /8R2 144A (12.5-2) (W, W11) (12) * /7R2 149A (16./7-2) (12) (14) (13., DW13) * /75R2 16A (14.5-2) (14) (16.5/75-2) (13., DW13) * (Litres) (km/h) /8R24 156A8 DW (15.5/8-24) (DW14L) (13,13.) * * /8R24 162A8 DW (15.5/8-24) (DW12, DW14L) (13, 13.) * * /8R24 154A8 DW14L ( ) (DW15L) * /7R24 152A8 DW15L (17.5L-24) (DW14L) * /7R24 157A8 DW16L (19.5L-24) (DW15L) * /8R26 16A8 W15L ( ) (W16L) * /8R28 156A8 W14L ( ) (W15L) * /7R28 159A8 W16L (19.5L-28) (W15L)(nominal) * DW type rims are recommended for easier mounting. Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. * Cyclic applications with maximum one way distance of 6 metres. IT5 (Litres) (km/h) /7R24 151G W14L MPT (W15L)

22 IT5 42 R 4 Radial Industrial Traction Drive 43 Features & Benefits Radial construction: longer tread life and better comfort Block design: excellent hard ground traction 3 section block lugs: longer tread life Wide size range: fitting most equipment IT5 (Litres) (km/h) /8R18 134A8 W (12.5/8-18) (W9,11,W11) * /8R18 136A (12.5/8-18) (W,W11) (12) * /7R18 147A8 DW (15.5/7-18) (DW12) (13.) (DW13) * /7R2 149A8 DW (16./7-2) (DW12) (14) (13., DW13) * /7R24 158A8 DW (16./7-24) (13,13.) (DW14L) * (Litres) (km/h) /8R24 154A8 DW14L ( ) (DW15L) * /7R24 157A8 DW16L (19.5L-24) (DW15L) * /8R26 16A8 W15L ( ) (W16L) * /8R28 156A8 W14L ( ) (W15L) * /7R28 159A8 W16L (19.5L-28) (W15L) * Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. DW type rims are recommended for easier mounting. * Cyclic applications with maximum one way distance of 6 metres.

23 Bias Industrial Traction Drive 44 R 4/I3 Bias Industrial Traction Drive/Soft Soil Applications 45 Sure Grip Implement Industrial Sure Grip & Industrial Sure Grip Tractor For construction vehicles needing maximum grip Sure Grip Implement For all-terrain forklift trucks Back-hoes and material handlers in soft soil Industrial Sure Grip Sure Grip Traction Implement For small machines and cultivators Size PR LI Recc. OD SW RC SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) MPT (9SDC) MPT (11SDC,12SDC,12) IND W (W11,W12) IND W15L IND 149 W15L IND W15L Size PR LI Recc. OD SW RC SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) /8-18 FR 131 W (9,W8) DW /8-18 FR 139 W (11) DW /7-2 FR (12SDC,13SDC, 14) DW /7-2 FR (12SDC,13SDC, 14) DW /8-24 FR W (W13,W14L) DW /8-24 FR W (W13,W14L) DW /85-24 FR W (W14L,W15L) DW /85-24 FR W (W14L,W15L) DW /85-28 FR 159 W (W14L,W15L) DW Sure Grip Traction Implement Size PR LI Recc. OD SW RC SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) FR F (4.E,5K,5.F) (6.F,6LB) DW FR F (5.F,5.F) DW L-16.1 FR DW Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised. FR = free rolling, DW = driven wheel. Industrial Sure Grip Tractor Size PR LI Recc. OD SW RC SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) IND W15L IND 151 W15L

24 Bias Industrial Traction Drive 46 R 4/I3 Bias Industrial Traction Drive/Hard Soil Applications R 4 Radial Industrial Traction Drive 47 Traction Implement Size PR LI Recc. OD SW RC SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) / FR DW Sure Grip Industrial Tractor & Industrial Implement FR = free rolling, DW = driven wheel. For diggers working in very arduous conditions Skid Steer IT323 Sure Grip Lug For construction vehicles in variable conditions Traction Implement Low aspect ratio tyre for industrial work Deeper nonskid for longer wear Large lug surface area for high load durability Wear pad for improved tyre wear and increased traction Reinforced centreline undertread for tread penetration resistance Sidewall scuff rib/flange cover for sidewall penetration resistance Sure Grip Industrial Tractor/Sure Grip Industrial Implement Size PR LI Recc. OD SW RC SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) IND W16L (W15L) IND W15L IND 149 W15L /85-28 FR 159 W (W14L,W15L) DW Sure Grip Lug Size PR LI Recc. OD SW RC SLR Max. Load (kg)/inflation Pressure (bar) (Authorised) (km/h) /8-18 FR 131 W (9,W8) DW /8-18 FR 139 W (11) DW /7-2 FR (12SDC,13SDC, 14) DW IND W16L (W15L) IT323 Size PR Recc. OD SW RC SLR Contents Max. Load (kg)/inflation Pressure (bar) (Litres) (km/h) , (6) (8) , (8) 24 () Outside diameter (OD), section width (SW) are design dimensions in mm. For field applications under high and sustained torque, the loads for km/h apply. data in bold print is recommended rim, other rim data indicated are authorised.