Safety Engineered. Hoist Rings. Page 14. Heavy Duty Side Pull Hoist Rings Page 19. Spin-N-Lok Hoist Rings Page 23. Heavy Duty
|
|
- Sylvia Morgan
- 6 years ago
- Views:
Transcription
1 TABL OF CONTNTS Page 12 - Metric Page 13 Safety ngineered Page 14 Safety ngineered Hoist Rings - Metric Page 15 Stainless Steel Safety ngineered Page 16 Stainless Steel Safety ngineered - Metric Page 17 Z-Torque Page 18 Side Pull Page 19 Side Pull Page 20 Flip-Flop Page 21 Fast-Lok Plate Lifting System Page 22 Weld-In Threaded Inserts Page 22 Spin-N-Lok Page 23 Road Plate Hoist Ring Page 23 Weld Mount Page 24 Scissor-Lok System Page 24 Super-Coil Page 25 Swivel/Pivot Lift Plate Page 25 Bolt Type Anchor Shackle Page 26 Weldless Alloy Rings Page 26 Shackle Page 27 Universal Lift Ring Page 28 Windworker Page 29 3
2 HAVY DUTY HOIST RINGS COMPLT LIN THROUGH 30,000 POUND WORKING LOAD LIMITS Material: Forged High Strength 4140 alloy steel Design Factor: Minimum of 5:1 Meets manufacturing and design requirements of ASM-B30.26 and MIL-STD 209 Magnetic icle Inspected Per ASTM 1444 ach Individually Serial Numbered Rated Load +/-.12 F G K L M (ft-lbs) / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Supplied with stud and nut Long Bar Models * Recommended Torque Load For load ranges of 50,000 to 250,000 lbs. refer to our Safety ngineered. are completely interchangeable with Safety ngineered. 12
3 HAVY DUTY HOIST RINGS - MTRIC Material: Forged High strength 4140 alloy steel Minimum Design Factor = 5:1 Meets manufacturing and design requirements of ASM-B30.26 and MIL-STD 209 Magnetic icle Inspected Per ASTM 1444 ach Individually Serial Numbered Rated Load +/- 3.0 F G K L M M8x M8x M10x M10x M12x M12x M12x M12x M14x M14x M14x M14x M16x M16x M16x M16x M20x M20x M20x M20x M20x M20x M24x M24x M24x M24x M30x M30x M30x M30x M30x M36x M42x M48x M56x Supplied with stud and nut Long Bar Models. Replacement screws are available. (Nm) 13
4 SAFTY NGINRD HOIST RINGS Material: High strength 4140 alloy steel Design Factor: Minimum of 5:1 Meets manufacturing and design requirements of ASM-B30.26 and MIL-STD 209 Magnetic icle Inspected Per ASTM 1444 ach Individually Serial Numbered Patent 5,848,815 Rated Load +/-.12 (ft-lbs) / / oz / / oz / / oz / / oz / / lb / / lb. 5 oz / / lb. 12 oz / / lb. 5 oz / / lb / / lb. 5 oz / / lb. 12 oz / / lb. 7 oz / / lb. 12 oz / / lb. 7 oz / / lb. 14 oz / / lb. 9 oz / / lb / / lb. 9 oz / / lb / / lb. 8 oz / / lb. 1 oz / / lb. 10 oz / / lb. 4 oz / lb. 10 oz / lb. 10 oz / lb. 12 oz / lb. 12 oz / lb / lb lb lb lb lb lb lb / lb / / lb / / lb / / lb. 12 oz / / lb. 12 oz / lb / / lb / / lb / / lb. 8 oz / / lb. 8 oz / lb / / lb / lb lb lb For higher working load limits, see Z-Torque. Supplied with stud and nut Long Bar Models * Recommended Torque Load 14
5 SAFTY NGINRD HOIST RINGS MTRIC Material: High strength 4140 alloy steel Design Factor: Minimum of 5:1 Meets manufacturing and design requirements of ASM-B30.26 and MIL-STD 209 Magnetic icle Inspected Per ASTM 1444 ach Individually Serial Numbered Patent 5,848,815 Rated Load +/- 3.0 (Nm) M8 x M10 x M12 x M12 x M16 x M16 x M20 x M20 x M20 x M20 x M24 x M24 x M30 x M30 x M30 x M30 x M36 x M42 x M48 x M64 x M72 x M90 x Supplied with stud and nut * Recommended Torque Load NOT: DIMNSIONS AR IN MILLIMTRS 15
6 SAFTY NGINRD HOIST RINGS STAINLSS STL Material: 300 Series Stainless Steel Design Factor: 5:1 Range of Movement: Swivel 360, Pivot 180 Under Load NDT: Liquid Penetrant Tested Per ASTM Purification Process: Clean & Passivate Per ASTM-A967 Typical Applications: Use Stainless for Corrosive, Cryogenic or levated Temperature nvironments All dimensions approximate - variations do not affect use or design factor ach Individually Serial Numbered Rated Load +/-.12 Patent 5,848,815 (ft-lbs) / / oz / / oz / / oz / / oz / / lb / / lb. 5 oz / / lb. 12 oz / / lb. 5 oz / / lb / / lb. 5 oz / / lb. 12 oz / / lb. 7 oz / / lb. 7 oz / / lb. 14 oz / / lb. 7 oz / / lb. 14 oz / / lb. 9 oz / / lb / / lb. 9 oz / / lb / lb. 10 oz / lb. 4 oz / lb. 10 oz / lb. 10 oz / lb. 12 oz / lb. 12 oz lb lb lb lb lb lb / / lb / / lb. 12 oz / / lb / / lb. 8 oz / / lb. 8 oz / lb / / lb Supplied with stud and nut * Recommended Torque Load 16
7 SAFTY NGINRD HOIST RINGS STAINLSS STL/MTRIC Hoist Ring Material: 300 Series Stainless Steel Design Factor: 5:1 Range of Movement: Swivel 360, Pivot 180 Under Load NDT: Liquid Penetrant Tested Per ASTM Purification Process: Clean & Passivate Per ASTM-A967 Typical Applications: Use Stainless for Corrosive, Cryogenic or levated Temperature nvironments ach Individually Serial Numbered Patent 5,848,815 Rated Load +/- 3.0 (Nm) M8 x M10 x M12 x M12 x , M16 x M16 x M20 x M20 x M20 x M20 x M24 x M24 x M30 x M30 x M30 x M30 x M36 x M42 x M48 x M64 x Supplied with stud and nut * Recommended Torque Load Long Bar Models NOT: DIMNSIONS AR IN MILLIMTRS 17
HEAVY DUTY ROAD PLATE HOIST RING
HEAVY DUTY ROAD PLATE HOIST RING Association of Crane & Rigging Professionals is ready and able to serve you with other quality products. FAST-LOK TM PLATE LIFTING SYSTEM HEAVY DUTY SAFETY LIFT EYE LUG-LOK
More informationLIF TING SOLUTIONS. Lifting Solutions
Center Pull Style... 484-485 Envirolox Protective Finish... 494 Eye Bolts...500 Eye Nuts... 499 Forged Center Pull...487 488 Forged Center Pull Stainless Steel...486 Kwik-Lok Lifting Pin...495 496 Hold
More informationLifting capacity rated from 7,000 to 10,000 pounds. Safety Factor 5:1. Loads are distributed in rectangular base.
Pivot Lifting Plates Pivot Lifting Plates 4140 Certified Aircraft High Quality Heat Treated Steel Material Lifting capacity rated from 7,000 to 10,000 pounds. Safety Factor 5:1 Loads are distributed in
More informationLifting Devices Hoist Rings - Eye Bolts
Lifting Devices Hoist Rings - Eye Bolts Snap Rings - Hoist Rings Hoist Ring Accessories HOIST RING CLIPS Pg K3 SIDE LOAD HOIST RINGS Pg K5 CLIP RETAINERS Pg K6 SWIVEL HOIST RINGS Pg K2 FORGED SWIVEL HOIST
More informationEngineer The Lift!! HOIST RINGS. Applied Load Changes With Sling Angle. Sample Calculation: DO S DON TS
H&O DIE SUPPLY, INC. 1-800-222-5441 sales@hodie.com HOIST RINGS 10 Adjustable Alloy Chain Sling... 10.16 Center Pull Style... 10.4-10.5 Envirolox Protective Finish... 10.11 Eye Bolts... 10.15 Eye Nuts...
More informationHOIST-RING SAFETY PRECAUTIONS
age 34 (Rev. 4-07) & SI ROUTS 7200 MIR RIV, WRR, MI 48092, 586-9 & SI ROUTS 7200 MIR RIV, WRR, MI 48092, 586-978-3377 OIST-RI STY RUTIOS The following safety precautions apply to all lifting devices on
More informationMade. Quality. American
Quality Control for Safety s Sake Our quality control procedures dene the entire manufacturing process and provide complete traceability from raw materials, tested in our metallurgical lab, to nished product.
More informationMade. Quality. Rugged. American
Quality Control for Safety s Sake Our quality control procedures define the entire manufacturing process and provide complete traceability from raw materials, tested in our metallurgical lab, to finished
More informationYellow Point WARNING NEVER EXCEED PUBLISHED WORKING LOAD LIMIT. Catalog No YP. Copyright 2017 YOKE Industrial Corp. All Rights Reserved.
Yellow Point Catalog No. 8-2017.YP 2 3 Yellow Point 4 Worldwide Quality Type Approval And Certificate: 5 Quality Control, Testing, and Detecting during manufacturing YOKE runs a constant and strict production
More informationMINING PRODUCTS FOR HOISTS & RIGGING. Manual Hoists. Chain & Rigging Attachments. Specialized Attachments. Liner Bolts. for THE MINING INDUSTRY
A Complete Line of Products & Solutions for THE MINING INDUSTRY HOISTS & RIGGING PRODUCTS FOR MINING Manual Hoists Chain & Rigging Attachments Specialized Attachments Liner Bolts Columbus McKinnon Family
More informationSafety is our first priority TM
Safety is our first priority T Catalog No. -2013.YP1 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED
More informationYellow Point. Catalog No YP.1
Yellow Point Catalog No. -2014.YP.1 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
More informationYellow Point. Catalog No YP.2
Yellow Point Catalog No. 8-15.YP.2 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
More informationr Class 1 - Alloy chain.
&-C-271C 17 July 1986 SUPERSEDING Fed. Spec. RR-C-271B August 28, 1973 (See 6.9) FEDERAL SPECIFICATION CHAINS AND- AITACHtIENTS. WELDED AND WELDLESS This specification is approved by the Commisioner, Office
More informationMILITARY SPECIFICATION SHEET SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A
INCH-POUND MS35307E 25 April 1997 Superseding MS35307D 1 May 1969 MILITARY SPECIFICATION SHEET SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A This specification
More informationClick. Campbell Fittings Table of Contents. on the section you want
Campbell Fittings Table of Contents Click on the section you want Contents Clips, Forged Wire Rope Eyebolts Eyes, Lifting Hooks, Grab/Slip Hooks, Hoist Hooks, Latch Kits For Links Links, Clevis Links,
More informationICE-LBG-SR. ICE Load ring for bolting Super Rotation
HUMANES DE MADRID CP 28970 (MADRID) ICE Load ring for bolting Super Rotation 18 RUD Ketten Rieger & Dietz GmbH u. Co. KG MADE IN GERMANY ICE-bolt with revolutionary mechanical characteristics No loosening
More informationWhen buying Crosby you re buying more than product, you re buying Quality.
From a 2 ton capacity snatch to a 6000 metric ton capacity crane, McKissick can make a McKissick s major involvement in the block McKissick When buying Crosby you re buying more than product, you re buying
More informationDRAGLINE CHAIN AND RIGGING
ID QTY DESCRIPTION 76517217 2 76549610 1 76640615 2 76693810 2 4 CHAIN, 29-1 PITCH, WITH XTEND, 1 PEAR END LINK, 1 STUD END LINK / 6 PIN 3-1/2 CHAIN, 26-10 PITCH, 2 PEAR END LINKS 3 CHAIN, 28-10 PITCH,
More informationToll Free: 877/ Fax: 814/
Low Profile Avionics Mounts (AM ) Low profile, all-direction vibration and shock mounts for avionics equipment and other sensitive devices Lord Corporation low profile Avionics Mounts (AM ) set the standard
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationTNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
More informationTable of Contents... Premium Aluminum Sections... Vertical Section... Horizontal Section... Stationary Casement Vertical Section...
TABL OF CONTNTS Table of Contents.......................................... Premium Aluminum Sections................................ Vertical Section...................................... Horizontal Section....................................
More informationHyperMill 100. HyperMill ,0 mm mm mm 100 Rpm. Recommended to. 144 Nm 4,488 0,787 4,370 1,378 4,37 106,2 Ft.
HyperMill 100 HyperMill series, pneumatic tube facing, bevelling and weld removal machine. The MiniMill is a rugged, fast, portable weld end preparation lathe for tubes including stainless and other high
More informationPYPLOK System It s the weldless, threadless way to join pipe/tube
The Tube-Mac PYPLOK System It s the weldless, threadless way to join pipe/tube Leakfree performance, reduced installed cost and minimised downtime The Tube-Mac PYPLOK connecting system is sparkless and
More informationSqueeze Action Plier Clamps
7.7 Series 460, 480 Product Overview Drop forged alloy steel components for exceptional strength Two way trigger release allows for fast and easy opening of clamp Welding 462 462-2 463 480 482 With Two
More informationLifting Magnets. Features. Lifting Magnet Construction
Lifting Magnet Construction The Lifting Magnet has strong magnetic path produced by Nd-Fe-B magnetic materials. The On and Off magnetic path is controlled by turning the handle manually. It uses magnet
More informationWire rope accessories. 5. Wire rope accessories. Index
Wire rope accessories 5. Wire rope accessories 1 General 1.1 About Hendrik Veder Group 1.2 Trade names 1.3 Certified Quality 1.4 Certificates 1.5 Key suppliers & brands 1.6 Contact information 1.7 Locations
More informationLinear Units with Belt Drive and Slide Guide
84 www.danahermotion.com Linear Units Linear Units with Belt Drive and Slide Guide Movopart Velocity Noise Acceleration Maintenance Repeatability Cost Force Guide Robustness Load Torque Stiffness Typical
More informationHOISTS RATCHET LEVER HOISTS
Yale HOISTS RATCHET LEVER HOISTS Yale PE & RS Ratchet Lever Hoist / to ton capacities Link chain models Light and portable Weatherized load brake Requires less handle pull to lift full load Efficient Yale
More informationSafety is our first priority
8-2014 TM Safety is our first priority General Catalog No. 8-2014 General Catalog No. 8-2014/1040312/210X297 Europe-100 General Catalog No. 8-2014 Producer logo Product code Size Working Load Limit size
More informationCHAINS.
CHAINS www.vanguardsteel.com CHAIN TABLE OF CONTENTS Page Chain Grade 30 Dimensions 1 Grade 30 Bright 2 Grade 30 Galvanized 3 Grade 30 Zinc Plated 4 Grade 70 5 Grade 80 6 Grade 100 7 Jack 8 Long Link 9
More informationTechnical Manual. Inspection Record For: Hoist Model No.: Hoist Serial No.: Hoist Inspection and Maintenance Guide
CPTEN-136 Technical Manual Hoist Inspection and Maintenance Guide Inspection Record For: Hoist Model No.: Hoist Serial No.: WARNING! Failure to follow these inspection procedures can cause personal injury
More informationbut this affects the load rating - please ask for more information. Please refer to our technical information pages when specifying and/or using.
Double Swivel Shackle Nuts female Lifting Bolts & Shackles 4010 Material High tensile steel, strength class >8. Supplied with CE certificate. Technical notes Designed to be used directly with the hook
More informationDuplex Steel & Engineering Company
+91-8048601907 Duplex Steel & Engineering Company https://www.duplexsteel.net/ Incorporated in the year 1996, we at Unisteels and Engg. Co. Pvt. Ltd. are engaged in exporting, supplying variety of Super
More informationCM Lodestar Electric Chain Hoist Mechanical Parts List
CM Lodestar Electric Chain Hoist Mechanical Parts List Models Key No. Part Name No. Req'd A, A-2, AA, AA- 2, B, B-2, C, C-2, F, F-2 E, E-2, H, H-2 J, J-2, JJ, JJ-2, L, L- 2, LL, LL-2 R, R-2, RR, RR-2
More informationSHEET METAL FASTENERS
SHT MTAL FASTNRS Wherever you are... we have the solution! The P-FH / P-FHS SLF is a threaded fastener which incorporates a knurled platform under the head, which when embedded in the sheet, displaces
More informationTransport anchor system. Lifting Socket. Flat Lifting Socket. Short Anchor
Transport anchor systm W provi a complt Transport anchor systm, from various Transport Anchors, lifting vics to plastic accssoris as wll as Tchnical support. Casting in th anchors into th concrt with avanc
More information6-A SECTION INDEX
Buffalo - Headquarters: 71.82.23 FAX: 71.82.4412 SECTION INDEX SECTION ALUMINUM Chain...-20 BINDER Chain Assemblies...-19 (Grade 70) Chain...-18 CHAIN Adjuster, Tire...-22 Aluminum...-20 Attachments...-17
More informationKunkle Safety and Relief Products. Series 6000
ASME Section I and VIII, Steam, V and UV, ASME Section VIII, Air/Gas UV National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, Steam, HV National Board Certified. PED Certified for
More informationPRODUCT MODEL AND KIT NUMBERS
IV. T PARTS DIAGRAMS AND LISTS - TABLE OF CONTENTS- his chapter contains parts diagrams and parts lists for the RICON R1209 Six-Way Power Seat Base. The exploded view of each major lift assembly shows
More informationINDUSTRIAL PIPE SUPPORTS CATALOGUE
INDUSTRIAL PIPE SUPPORTS CATALOGUE DATE PUBLISHED: 1/06/2017 BINDER GROUP INDUSTRIAL PIPE SUPPORT CATALOGUE TABLE OF CONTENTS 1. INTRODUCTION... 4 2. QUALITY MANAGEMENT CERTIFICATE... 5 3. PIPE SUPPORT
More informationCHICAGO HARDWARE & FIXTURE COMPANY
CHICAGO HARDWARE & FIXTURE COMPANY Manufacturers of Wire Rope and Cha Fittgs, Industrial and Mare Hardware and Allied Products Sales offices and warehouse stocks are mataed the prcipal cities to enable
More information- Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN.
CARBON STEEL PIPES STAINLESS STEEL PIPES - Seamless pipe, Welded pipe (ERW), Spiral welded pipe. - Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN. - Standard: ASME/JIS - Material: ASTM A53/A106
More informationPERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
More informationAnnex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : Keresteciler Sitesi E Blok No:5 Kat:2 Ostim / Yenimahalle 06170 ANKARA/TÜRKİYE Phone : +90 312 385 95 30 Fax : +90 312 386 00
More informationINFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE:
INFACT CORPORATION WATERWORKS PRODUCTS SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com ENGINEERING DATA / PRODUCT CHECKLIST EASY-TO-INSTALL SPACE-SAVING RESTRAINT
More informationINSTRUCTIONS FOR USE CAUTIONS AND WARNINGS
SECTION 3 General INSTRUCTIONS FOR USE CAUTIONS AND WARNINGS Commercial shackles are not to be used for lifting purposes. Should extreme circumstances or shock loadings be applicable, this must be taken
More informationKIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN / ISO 5199
KIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN 22858 / ISO 5199 MAGNETIC DRIVE PUMP TYPE - RMK RANGE Discharge capacity (Q) : 3 Up to 300 m /hr Delivery head (H) : Up to 150 m (at 2900 rpm) Available nominal
More informationSqueeze Action Plier Clamps
7.1 N[lbf.] Maximum Clamping Thickness mm [inch] Series Section.Page 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 4000 [675 to 900] 4000 to 5000 [900 to 1125] 5000 to
More informationSeries 2000 Top Guided Control Valve
Series 2000 Top Guided Control Valve Series 2000 Control Valve Series 2000 process Control Valves. Sturdy design with special service trims available for: Cavitation Control Noise Reduction Top entry construction
More informationMAX-LIFT PREMIUM. Scissor Lift Tables Double MAX-Lift MAX-LIFT. MAXimum Performance MAXimum Quality MAXimum Reliability
MAX-LIFT PREMIUM Scissor Lift Tables Double MAX-Lift MAX-LIFT MAXimum Performance MAXimum Quality MAXimum Reliability MAX-MGV (Manually Guided Vehicle) Self-Propelled Custom Models MAX-Lift With Rotating
More informationCHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70
Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile
More informationsqueeze action plier clamps
squeeze action plier clamps Sizing and Application Chart N [lbf.] Maximum Clamping Thickness mm [inch] Series Page: MC-SAP-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 65] 3000
More informationDETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 3 December 2012 SUPERSEDING 30 September 2011 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department of
More informationVICTOR SNAP ON STEEL STRAPS FOR HEAVY WALL CONDUIT (RIGID)
SNAP ON STL STRAPS FOR HAVY WALL CONDUIT (RIGID) CONDUIT (RIGID) STANDARD SRIS /-S.62 /2-S.62 27 -S.62 3 /2 -S.62 35 24-S.62 2 -S.62 /26-S.62 2 5 /2 27-S.62 2 7 2 2-S.62-2 /2 29-S /32.93 4-9 3-S /32.93
More informationScrewdrivers, Nut Drivers and Accessories
Screwdrivers, Nut Drivers and Accessories Offering a variety of tip types, hex sizes, shaft lengths, and handle designs, Klein has the screwdrivers and nut drivers professionals demand to get the job done
More informationSS11 Tiger Subsea Lever Hoist
SS11 Tiger Subsea Lever Hoist Main Features Range from 800kg 10000kg *NEW* Twin Cam shaped pawl design Proven track record Double switch brake mechanism Marine specific friction discs Meets and exceeds
More informationBelow the Hook Lifting
SECTION INDEX S E C T I O N 1 3 BALE LIFTING TONG...-14 BARRIER GRABS...- 14 BEAM TONGS...-14 BEAM, SPREADER Adjustable...-4 Custom...-5 Fiberglass...-4 Fixed...-3 BEAMS, LIFTING Adjustable Hook...-1 Custom...-5
More informationNOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128. U.S. No. 3,852,076 AND INTERNATIONAL REGISTERED TRADEMARKS
NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863,128 3. U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS 4. MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF) OR
More informationDETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 30 September 2011 SUPERSEDING MS51844D 19 April 2007 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department
More informationImpact Sockets & Accessories
HEAVY BOLTING APPLICATIONS Impact Sockets & Accessories A complete solution for every tool application Ph: 1300 WALTAN (1300 925 826) 6 POINT SOCKETS 12 POINT SOCKETS IN-HEX DRIVERS ADAPTORS UNIVERSAL
More informationAPEX CHAIN AND CABLE INC.
APEX CHAIN AND CABLE INC. PRODUCT LINE CARD ***PLEASE INQUIRE ABOUT OUR COMPLIMENTARY INSPECTIONS*** ACCO-ANVER ACTEK MFG. BUDGIT CAMPBELL CAN-AM CASTERS / COLSON CARR-LANE COLUMBUS McKINNON CROSBY GLEASON
More informationINSULATING LINKS, ISO/LINK AC & DC
INSULATING LINKS, ISO/LINK AC & DC INDUSTRIAL UTILITY & CONSTRUCTION 800.733.7071-1.508.248.3941 - Fax 1.508.248.0639 74 INSULATING LINKS, ISO/LINK AC & DC Proven Performance in Hi-Voltage & Hi-Current
More informationTiger Lifting Home of the Tiger hoisting range & Tiger subsea lifting products
Tiger SS11 Subsea Lever Hoist with overload protection with overload protection with clevis adaptor and shackle Main Features DNV GL Verification tested according to NORSOK R-002 Available with slipping
More informationTorkLift T1 Heavy Duty Scissor Lift Tables Premium Lift Quality & Durability
TorkLift T1 Heavy Duty Scissor Lift Tables Premium Lift Quality & Durability The TorkLift family is Autoquip's premium series of work station hydraulic lifts. With five times the number of life cycles
More informationKUNKLE SERIES 6000 SAFETY VALVES SAFETY AND RELIEF PRODUCTS
Bronze safety valves to ASM section I and VIII, steam, V and UV ; section VIII, air/gas, UV National Board certified including models to ASM section IV, steam V. P certified for non-hazardous gas ATURS
More informationASME Section I and VIII - NB Certified for Air/Gas and Steam. Series 560. Series 570. Series Stainless steel whetted trimming.
SAFETY VALVES Safety Valves SIZES FROM 1/2 TO 2 1/2 RATED TO 300 PSI TEMPERATURES TO 450 F ASME Section I and VIII - NB Certified for Air/Gas and Steam Aquatrol s Series / valve line is a high capacity
More informationProfessional TorqueControl Screwdrivers. Complete TorqueControl Program
208 Professional TorqueControl Screwdrivers Complete TorqueControl Program 2 Toll Free: (800) 494-604 Wiha TorqueFix Wing Handles & Blades DESCRIPTION Page Wiha EasyTorque Handles DESCRIPTION Page TorqueFix
More informationAccessories. Aluminum Duplex Sleeves (Hour glass shape) Aluminum Oval Sleeves. Copper Duplex Sleeves or Copper Zinc Plated Duplex Sleeves Code Copper
Accessories Aluminum uplex Sleeves (Hour glass shape) Weight / each approx. AOS-132 1/32.0002 AOS-364 3/64.001 AOS-116 1/16.001 AOS-564 5/64.002 AOS-332 3/32.003 AOS-018 1/8.006 AOS-532 5/32.008 AOS-316
More informationEZ Tool Articulating Arm
EZ Tool Articulating Arm EZ tool arm features: Covers a 610 x 762 mm (24 x 30 inch) horizontal rectangular work envelope. Two piece arm with overall length from 864 to 1067 mm (34 to 42 inches). Anodized
More informationPlain Ended Welding Fittings BS 4825 Part 2
Plain Ended Welding Fittings BS 4825 Part 2 Alchem offer a wide range of plain ended weld fittings to suit both hygienic and pharmaceutical applications. These include bends, tees, and reducers, both concentric
More informationCrosby Lifting Clamps. Featuring CrosbyIP and Crosby Clamp-Co Clamps. English - Metric
rosby Lifting lamps eaturing rosbyip and rosby lamp-o lamps nglish - Metric rosby develops practical solutions for specific lifting problems Our mission is to be the innovative and quality leader in the
More informationDesign CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet
Instruction Manual Form 5410 November 1998 Design CP/ENVIRO-SEAL Bellows Seal Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet Contents Introduction.............................. 1 Scope of
More informationHANG IN THERE. WITH BLUE RIDGE FORGE s NEW BENT BAR PRODUCTS. Blue Ridge Forge, Inc. Certified Custom Lifting Devices
HNG IN TH WITH LU IG FOG s NW NT POUTS. 316 W. edar Street hillicothe, IL 61523 lue idge Forge, Inc. ertified ustom Lifting evices Office: 309-274-5377 Fax: 309-274-5021 ent ar Products INTOUING TH NW
More information5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Reduced Port. 2-pc, Split Body. Carbon or Stainless Steel
langed Ball Valves, API 67 iresafe ASME Class 1 81 Series eatures Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 98 inspection
More informationMax. Operating Pressure Kgf/cm 2
In-Line Check Valves DIRCTIONAL CONTROLS These valves allow free flow in one direction and prevent flow in the reverse direction. Cracking pressure specified is the pressure required to open the valve
More informationTOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
More informationSwing Check Valves
Swing Check Valves ORION S.p.A. via Caboto, 8 34148 Trieste Italy tel. +39 040813204 fax +39 040811203 e mail sales@orionvalves.com http://www.orionvalves.com Swing Check Valves 3 1 4 7 2 5 6 2 Cast steel,
More informationSpeed Controller with One-touch Fittings
In-lin Typ 4 typs of mounting variations Dirct mounting Indx plat It is possibl to idntify th product whn multipl controllrs ar mountd and idntify th flow dirction by attaching an idntification labl. Controlld
More information5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel
langed Ball Valves, API 67 iresafe ASME Class 1 81 Series eatures Investment cast 2-piece bolted body construction Blow-out proof stem Adjustable, live-loaded graphite packing API 98 inspection and testing
More informationC35. Assembly Instructions. Mobius Floor Lamp & C Page 1 of 7. Prepare Base (Figures 1& 2)
Mobius Floor Lamp 23-4505 & 23-4505C Page 1 of 7 Prepare Base (Figures 1& 2) A 8-32 Screw (2) B Wireway Cover Plate C Base D Lower Pipe Assembly E Threaded Stud (4) F Hex Nut (4) 1. Carefully unpack the
More informationV75-II PLOW PARTS MANUAL
PLOW RWF INDUSTRIES 873 Devonshire Ave., Woodstock, Ontario N4S 8Z4 Tel: (519) 421-0036 Toll Free: 1-800-263-1060 Fax: (519) 421-0028 Email: rwf@wwdc.com GENERIC JANUARY 2015 The information contained
More informationThe Fast-track. valves. manufacturer for valves
The Fast-track valves manufacturer for valves Introduction The valves are intended for a wide range of applications, such as oil and gas, chemical, petrochemical, energy and process industry. BSM Valves
More informationAPPLICATIONS - Textron Lycoming Engines. (see Service Letter No A) LO-360-E1A6D (see Service Letter No A)
Technical Aspects are FAA Approved Number: L98-08 D Replaces L98-08 C Date: 04/18/2005 Subject: Overhaul and repair of SL32000WH and SL36000WH Cylinder. Application: CYLINDER ASSEMBLY SL32000WH-A1 Stud
More informationIndustrial Lifting Equipment
Industrial Lifting quipment Trolley and Tractor Selection Guide 1/2 20 metric ton Lifting apacity Ingersoll-Rand offers a wide variety of plain, geared or powered trolleys for use with the MLK and HLK
More informationSHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
More informationDUAL DISK BRAKE CATALOG
DOVR FLXO LCTRONICS, INC. ISO 900 CRTIFID DUAL DISK BRAK CATALOG NO SQUAL WARRANTY 5 YAR WARRANTY HAVY DUTY DUAL DISK BRAKS Dover's heavy-duty Dual Disk Brake is a pneumatic tension brake available in
More informationDistributed by Tri-State Equipment Company Inc
COFFING LHH Models - Stamped steel hand chain hoists are an excellent low cost option in the Coffing line. The compact, lightweight design is ideal for construction and contractor applications where portability
More informationDUAL DISK BRAKE CATALOG
DOVR FLXO LCTRONICS, INC. ISO 900 CRTIFID DUAL DISK BRAK CATALOG NO SQUAL WARRANTY 5 YAR WARRANTY HAVY DUTY DUAL DISK BRAKS Dover's heavy-duty Dual Disk Brake is a pneumatic tension brake available in
More informationKunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
More informationC35 Mobius Floor Lamp & C Page 1 of 7
Mobius Floor Lamp 23-4505 & 23-4505C Page 1 of 7 Prepare Base (Figures 1& 2) A 8-32 Screw (2) B Wireway Cover Plate C Base D Lower Pipe Assembly E Threaded Stud (4) F Hex Nut (4) 1. Carefully unpack the
More informationTiger Lifting Home of the Tiger hoisting, winching and height safety ranges
Tiger Corrosion Resistant Chain Block Model No. SS12 with clevis adaptor and shackle Spark resistant option Main Features Suitable for use in multi-immersion applications DNV GL Verification tested according
More informationEZ LINER EXPRESS PARTS MANUAL
EZ LINER EXPRESS May 06 by Vehicle Service Group. All rights reserved. CO9. 60 Rev. C //06 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies warrants for one year from date of
More informationLodestar electric chain hoist
Lodestar electric chain hoist The balanced, integrated, proven design of the Lodestar has made it the most popular electric chain hoist in the industry. Lodestar gives you more value for your money including:
More informationServices. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains
RENTAL DIVISION PRODUCT LINES In a continuing effort to give the customer the opportunity to get an assortment of equipment, services and products from one supplier, our rental division was established
More informationGLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
More information// TITAN SCISSOR LIFT TABLE
Titan Heavy Duty Scissor Lift Tables Strength and Flexibility The Titan Heavy Duty Scissor Lift Table family is designed to combine the size and flexibility of a small lift with the lifting capacity of
More informationSAFETY HOIST RINGS SHM - SHMR
SAFETY HOIST RINGS SHM - SHMR Hoist rings - CE REF G A B D E F H K TL (Kgm) P (Kg) W (Kg) SHM 0001 M8x1,25 10,9 32,0 9,7 12,5 67,8 46,7 19,0 1,0 400 0,17 SHM 0002 M10x1,50 10,9 30,0 9,7 17,5 67,8 46,7
More informationWeir-Style Diaphragm Valves
www.swagelok.com Weir-Style Diaphragm s GSI Series Available in sizes 1/2 to 4 Available with a variety of end connections, including Kwik-Clamp and TS series sanitary clamp and tube butt weld 2 Weir-Style
More information