680 Series QFP Socket
|
|
- Madeline McCormick
- 6 years ago
- Views:
Transcription
1 QFP Socket Open top, Zero Insertion Force design for automatic loading Compact outline for maximum board density Highly reliable Dual Beam contact design, "H" version Lid actuation force peaks during stroke and drops off at full deflection for ease of use e Socket Dimensions (mm) s e (mm) (mm) Length (A) Width (B) Tip to Tip (mm) Part Number X X H max X14.6 max X max X14.6 max X X X H X X H X X * 680H max X 20.5 max X H * BQ QFP X X X X X X X X - X X X H = dual beam (-) = single beam Plating Variation Contact Material size 1 = Beryllium Copper 2 = Spinodal Socket Body: PES, PEI, LCP or Equivalent Contact: Beryllium Copper Alloy or Spinodal Contact Resistance: 50 mω Dielectric: 300V AC for 1 minute Insulation Resistance: 5, V DC 50
2 OTQFP & TQFP Sockets Open Top Quad Flatpack & Thin Quad Flatpack Reduced actuation force contact design Zero Insertion Force for auto load For 0.5mm pitch and higher, corner post alignment feature accommodates JEDEC package dimensions. Modular tooling provides maximum flexibility to meet most lead form and pin count combinations. Lid C Contact Base 16.0mm 8.2mm Seating Plane 0.76mm Standoffs Alignment Posts e (mm) Reduced Actuation Force QFP Sockets MO Id form MO-108/MS Id form MO Id form RF TQFP Socket MO-136/MS-026 2/0 Id form Dim A X B (mm) 14 X X X X X X X X-X8* 14 X X X X-X8* 14 X X X X X X X X X X X X X X X X X X X X X X X X-X8 20 X X X X-X8 24 X X X X-X8* 24 X X X X-X8* 28 X X X X X X X X X X X X X X X X-X8 28 X X X X-08 *Requires device fit up at factory Form 0 = 2.0 mm MS = 2.6 mm MS = 3.2 mm MS = 3.9 mm MO X XX - XXX - X - X X Contact Material and Plating 3 = Spinodal w/ Au (overall) 4 = Spinodal w/ Au & SnPb (select) 7 = Riveted Lid 8 = Lid with Nails 0 = Standard, Without Rails 1-6 = Rail Positions* 7-9 = Custom Configuration* Socket Body: PEI, PPS, or Equivalent Contact: Spinodal Contact Normal Force: 25 grams Contact Resistance: < 65 mω Dielectric: 1000V AC RMS for 1 minute Current Rating: 1.0 Amp 51
3 7000 OTQFP & TQFP Sockets Open Top Quad Flatpack & Thin Quad Flatpack Zero Insertion Force for auto load High normal force scrubbing contacts For 0.5mm pitch and higher, corner post alignment feature accommodates JEDEC package dimensions. Modular tooling provides maximum flexibility to meet most lead form and pin count combinations. Pin #1 Reference 2X 150 Alignment Posts A 2X 150 Alignment Post Date Code Revision Code Lid Base Contact 16.0mm 8.2mm Seating Plane 0.40x0.20 Part Number 20mm 144 Ld Version for Ref. Only 0.76mm Standoffs (Free Height) Alignment Posts 13.0 (Actuation Height) 8.2/8.5 (Steating Plane) All dimensions shown as millimeter s Standard QFP Sockets TQFP Sockets Dim A X B MO-112 MO-108 / MS-022 MO-143 MO-136 / MS-026 e (mm) (mm) 3.9 Id form 3.2 Id form 2.6 Id form 2.0 Id form 7 X X X-07 7 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X-48* 20 X X X X X X-58* 24 X X X-58 * 28 X X X X X X X X X X X-08 * Consult Factory for package fit Form 0 = 2.0 mm MS = 2.6 mm MS = 3.2 mm MS = 3.9 mm MO X XX - XXX - X - X X Contact Material and Plating 1 = BeCu, Select Gold 4 = Spinodal, Select Gold 7 = Riveted Lid 8 = Lid with Nails 0 = Standard, Without Rails 1-6 = Rail Positions* 7-9 = Custom Configuration* Socket Body: PEI, PPS, or Equivalent Contact: Spinodal or BeCu Alloy Dielectric: 1000V AC RMS for 1 minute Insulation Resistance: 100V DC Temperature Rating: -55 C to =150 C Current Rating: 1.0 Amp 52
4 564 MCR Sockets Normally closed contacts allow for maximum wiping action at point of contact. damage is averted with the use of a gimbled pressure plate incorporated in the socket lid. Support rings in both socket base and lid eliminate possibility for damaged test pads. Spring loaded stripper plate always presents the package for easy removal. High normal force, low contact resistance Low impedance contact design 85 C / 85% RH compatible (.110) Specifications Socket Dimensions (mm) Maximum JEDEC Outside Dimension e (mm) Spec. Length (A) Width (B) Height ( C) Part Number MO-94-AB XXX-XXX MCR Identifier Socket Test 6 = 0.65 mm 5 X X - XXX - X X X Ring 4 = 46 mm Current Rev Level Contact Plating 1 = 30 Microinches of Au Pin #1 Orientation 1 = Position shown 2 = 90 o CW rotation 3 = 180 o CW rotation 4 = 270 o CW rotation Socket Body: PPS or Equivalent Contact: Pfinodal Alloy Dielectric: 1,000V AC minimum Current Rating: 500 ma Insulation Resistance: 5, V DC Durability: 5,000 cycles min. 53
5 690 Open Top QFP Socket Dual pinch, Quad Flatpack socket Zero Insertion Force for automatic load/unload operations Device seats high in nest for maximum airflow PART NUMBER: = 0.80mm Insulator Material Contact Plating Socket Body: PEI or Equivalent Contact: Beryllium Copper Alloy or Spinodal Contact Normal Force: 30 grams Dielectric: 600V AC for 2 minutes Insulation Resistance: 12, V DC Durability: 5,000 cycles min. 54
NP276 Series (Open Top)
Ball Grid Array (BGA, 1.27mm Pitch) Specifications Insulation Resistance: Dielectric Withstanding Voltage: Contact Resistance: Operating Temperature Range: Contact Force: Mating Cycles: Materials and Finish
More informationNP352 Series (Open Top)
Specifications Insulation Resistance: 1,000M min. at 100V DC Dielectric Withstanding Voltage: 100V AC for 1 minute Contact Resistance: 100m max. at 10mA/20mV max. Operating Temperature Range: 40 C to +150
More informationengineered to connect Full Product Line
engineered to connect Full Product Line TEST solutions The technical data and specifications of the products shown in this catalogue are for reference only, and apply to products available at the time
More information3M Textool Test and Burn-In Sockets for 1.0 mm Area Array Packages Including Ball Grid Array and Land Grid Array
3M Textool Test and Burn-In Sockets for 1.0 mm Area Array Packages Including Ball Grid Array and Land Grid Array 1.0 mm Pitch Socket Platforms Socket Max. Package Maximum Max. Pin Lid Series Product Number
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More information92-Position LGA/LGA PCBeam Connector for
92-Position LGA/LGA PCBeam Connector for Neoconix P/N: BBX0092CMMHFAU00 FEATURES High density 0.7424mm area-array pitch Low profile, 1.55 mm mated height PCBeam high reliability LGA spring contacts Bifurcated
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More informationInMate. Design Guide. Socket Mount, Up to 100 A Using Vicor s Maxi, Mini, Micro Series Modules
InMate Design Guide Socket Mount, Up to 100 A Using Vicor s Maxi, Mini, Micro Series Modules Contents Part Numbers and Guide to InMate Selection 1 PCB Layout Drawings Full Brick (Maxi 2 Half Brick (Mini
More informationSMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More informationmcx connectors DIVIDER PAGE
mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM
More information2.4mm connectors 155
connectors 155 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E.312 HEX. ØA ØD ØB ØC ØD ØC ØB ØA M7 x 0.75-6g MALE, FEMALE, male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM LTR.
More information2.92mm connectors DIVIDER PAGE
connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A
More informationSPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SINGLE ROW DOUBLE ROW SLC
More informationPRODUCT SPECIFICATION
1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE
More informationInterface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
More informationMCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
More informationSERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
More informationMechanical Key Switch
Mechanical Key Switch B3F A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical and High-force. Excellent tactile feel combined with high life expectancy. Available in stick packaging for automatic mounting
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationTNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
More informationP Straight PCB Panel Mount Receptacle
How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied
More informationv1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Copyright 2013 JAE Electronics, Inc.
v1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Application Examples Laptops, Desktops, Ultrabooks Audio/ Video editing equipment Display devices Adapter/
More informationHPH PCB/MALE CABLE HPH SERIES PERFORMANCE/SPECIFICATION
PCB/ CABLE Straight TBS, R/A TBS, male crimp, Flex SMT, solder bucket, stacking, pin carrier Pin size/current: 0.6mm/4 amp Pitch: 1.905mm/0.075" on a staggered pitch of 0.953mm/0.0375 No. of contacts:
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationModel Number Structure
Solid State Relays Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking
More informationType N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
More informationB3F. Miniature, Space-saving Switch
B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and
More informationModel Number Structure
Solid State Relays CSM DS_E_2_2 Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible
More informationSummary of Packing Options Packing Options
9 Mechanical Data 9 Mechanical Data The following section describes the mechanical specifications of products in this Telecom Design Guide. Gas Plasma Arresters Package Dimensions / Specifications........................
More informationD2SW-P. Sealed Subminiature Basic Switch. Ordering Information D2SW-P
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
More informationPLCC Plastic Leaded Chip Carrier
PLCC Plastic ed Chip Carrier Plastic ed Chip Carriers (PLCC) are four-sided J ed Plastic body packages. counts range from 20 to 84. PLCC packages can be square or rectangle. Body sizes range from.35" to
More informationInterface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
More informationAmphenol SCE2/Terrapin Series
APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR
More informationSubminiature Basic Switch
Subminiature Basic Switch Subminiature Basic Switch Offers Long Life and High Reliability A design that combines simplicity and stability by the use of two split springs ensures a long durability of 30,000,000
More informationModel Number Structure
Solid State Relays (Single-phase) G3PB New Single-phase Solid State Relays with Compact Size for Heater Control Slim models with a thickness of only 22.5 mm are also available. Compact design achieved
More informationType Plunger Switch height Operating force Model Without ground terminal With ground terminal. 5.0 mm General-purpose: 100 g 150 g
Tactile Switch BF Miniature, Space-Saving Tactile Switch Provides Long Service Life and Easy Mounting Extended mechanical/electrical service life: 0 x 0 6 operations for x mm type and x 0 6 operations
More informationSpring Pin Socket User Manual
Spring Pin Socket User Manual Spring Pin Socket User Manual Selecting a BGA Spring pin socket...2 PCB Requirements...3 Thickness... 3 Finish... 3 Cleanliness... 3 IC and PCB Reflow Requirement...3 Socket
More informationMAXIMUM. Mill-Max Introduces Gull Wing SMT.070 Pitch ShrinkDIP & SIP Sockets and Headers
MAXIMUM solutions Mill-Max Introduces Gull Wing SMT.070 Pitch ShrinkDIP & SIP Sockets and Headers Mill-Max series 117, 127, 217 & 227 shrinkdip sockets accommodate memory chips and components which have
More informationOrdering Information. Snap Action Switch D2F. Subminiature Snap Action Switch D2F- Model Number Legend. Snap Action Switch D2F 31
Snap Action Switch Subminiature Snap Action Switch Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads(microvoltage/ microcurrent) Long life span assured by high-precision
More informationDH50 SERIES. DATASHEET Rev. A
DATASHEET DH50 SERIES 2:1 Wide Input Voltage Ranges Single Outputs, Efficiency up to 92% 2.0 x 1.0 x 0.4 Encapsulated Shielded Metal Package FEATURES RoHS & UL 94V-0 Compliant 50 Watts Output Power 2:1
More informationWelcome CIN::APSE. Technology
Welcome This guide has been designed to familiarize you with CIN::APSE - the unique, high-performance, solderless interconnect solution - and to guide you in using CIN::APSE in your applications. Table
More informationComponent Specification
1.0 DESCRIPTION OF CONNECTOR AND INTENDED APPLICATION. The M80 series stamped female Trio-Tek open barrel crimp contact and rectangular Trio-Tek crimp housing form part of the Datamate J-Tek range of 2mm
More informationD X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
More informationHigh-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.
Tactile Switch BW Tactile Switch with Sealed Construction for Automatic Soldering Sealed construction conforming to IP67 (IEC-6059) provides high reliability in locations exposed to dust or water. Available
More informationS Straight PCB Panel Mount Plugs
Sample Part umber K-43 M E P B Part umber PCB Panel Mount Plugs socket contacts with STRAIGHT PCB TERMIATIO Lightweight, rugged vertical mount headers feature gold-plated PC tail contacts for thru-hole
More informationENGINEERED TO CONNECT FULL PRODUCT LINE TEST SOLUTIONS
ENGINEERED TO CONNECT FULL PRODUCT LINE TEST SOLUTIONS ENGINEERED TO CONNECT ENGINEERED TO CONNECT ENGINEERED TO CONNECT ENGINEERED TO CONNECT ENGINEERED TO CONNECT ENGINEERED TO CONNECT ENGINEERED TO
More information2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
More informationMJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationSPECIFICATION AND PERFORMANCE TABLE OF CONTENT. 1. Scope Reference Documents Material and Components... 2
TABLE OF CONTENT 1. Scope... 2 2. Reference Documents.. 2 3. Material and Components...... 2 4. Design and Construction..... 2 5. Rating.. 2 6. Performance and Test Descriptions. 2 7. Test Requirements
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
More informationCompact Low Profile Connectors with High Hermeticity Performance
EN2997 Hermetic Connectors Compact Low Profile Connectors with High Hermeticity Performance Adapted to sensor applications under high aeronautical constraints, such as engine & landing gear environments.
More informationLJASeries. Limit Switches with Positive Opening Mechanism
Limit Switches with Positive Opening Mechanism LJASeries Snap action limit switches with positive opening mechanism enables general industrial machines to comply with EC directives and to acquire CE marking.
More informationASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationSerial Attached SCSI (SAS) Connector
Product 108-51053 Specification DR: Stanley Huang 24 Oct 2013 Rev G APVD: Vincent Peng Serial Attached SCSI (SAS) Connector 1.0 SCOPE This specification covers the requirements for product performance,
More informationHBB CONNECTOR SERIES. Engineering Superior Solutions. September 2015 Smiths Connectors. smithsconnectors.com
HBB CONNECTOR SERIES Engineering Superior Solutions September 2015 Smiths Connectors HBB CONNECTOR SERIES High Power, Quick Release Connectors 2 Table of Contents 4 PRODUCT OVERVIEW 9 COMPETITIVE ADVANTAGES
More informationSvetlana 3CX15,000H3 Medium-Mu Industrial Power Triode
Medium-Mu Industrial Power Triode T he Svetlana 3CX15,H3 is a highperformance ceramic/metal power triode designed for use in oscillator, amplifier, or modulator service. The ceramic is glazed to facilitate
More informationP Panel Mount Receptacles PIN CONTACTS WITH CRIMP TERMINATION
Crimp Terminated Receptacles, How To Order HOW TO ORDR Sample Part Number L-6P6 MT G Part Number Receptacles PIN CONTACTS WITH CRIMP TRMINATION connectors are designed for rear-panel mounting and are supplied
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationBLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
More informationSOLID TANTALUM CHIP CAPACITORS T495 SERIES Low ESR, Surge Robust
CATHODE (-) END VIEW W SOLID TANTALUM CHIP CAPACITORS Designed for very low ESR High ripple current capability High surge current capability 100% accelerated steady-state aging 100% Surge Current test
More informationSingle 2 Piece Contacts: BTB
Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years
More informationSPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
More informationVDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More information3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810
1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9
More informationLoad Resistive load (p.f. = 1) Inductive load (p.f. = 0.40, L/R = 7 ms) Rated load 5 A at 250 VAC, 30 VDC 2 A at 250 VAC, 30 VDC
Power PCB Relay G6D-ASI Reduced board space ideal for high-density mounting (45% smaller than the surface area of G6B). Slim package: measures 6.5 W x 17.5 L x 12.5 H mm Switches loads up to 5 A, 250 VAC/30
More informationEMC Shielding. Contents
EMC Shielding Contents Introduction SMT Shielding Clips Shielding Cans for SMT Clips Spring Contacts Positive Stop Extended (Antenna) Box Style Multi-Directional Development Kit EMC Shielding Introduction
More information3M Three-Wall and Four-Wall Headers. Series 3XXX
1 of 7 M Three-Wall and Four-Wall Headers Series XXX Product 78-10-0008-0 Released: 0-0-11 of 7 Table of Contents Section Page 1. Scope........ M Customer Documents....... Performance and Test Descriptions...
More informationIAX/LUX/LEX Series Low-Depth, Hydraulic-Magnetic Circuit Breakers. Introduction Configurations Delay Curves Operating Characteristics Decision Tables
IAX/LUX/LEX Series Low-Depth, Hydraulic-Magnetic Circuit Breakers Introduction Configurations Delay Curves Operating Characteristics Decision Tables 23 24 27 28 29 IAX/LUX/LEX Series Low-Depth, Hydraulic-Magnetic
More informationPRODUCT SPECIFICATION
288 Ckt Vertical Press Fit DDR4 DIMM 2.4mm Seating Plane 1.0 SCOPE This Product Specification covers the 0.85 mm centerline gold plated DDR4 DIMM edge card connector for 1.40 +/- 0.10 thick memory modules.
More informationAdam Technologies, Inc.
INTRODUCTION: Adam Tech SMT PLCC Series Sockets are low profile, thin wall sockets designed to convert plastic leaded chips to a thru-hole PCB format on a " centerline grid. They conform to JDC MS 016
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationPCB Relay. 2. Contact Form 2: DPDT 3. Terminal Shape None: PCB terminal F: Surface mount terminal
PCB Relay Ultracompact, Ultrasensitive DPDT Relay Compact size and low 5-mm profile. Low power consumption (140 mw for single-side stable, 100 to 300 mw for latching type) and high sensitivity. Low thermoelectromotive
More informationSvetlana 3CX2500H3 Medium-Mu Power Triode
Svetlana 3CX25H3 Medium-Mu Power Triode T he Svetlana 3CX25H3 is a highperformance ceramic/metal power triode designed for use in amplifier, oscillator, or modulator service. The ceramic is glazed to facilitate
More informationMPM160 Pressure Sensor
MPM160 Pressure Sensor Features Ranges: 0kPa~7kPa 700kPa MEMS Technology Gauge SOP or DIP package For non-corrosive gas Pressurize from back side Optional for pin direction Applications For medical fields,
More information48 Series - Contactor Relay 4PST - N.O. - Double Make, 15 Amp
48 Series - Contactor Relay 4PST - N.O. - Double Make, 15 Amp E13224 The 48 series is a contactor with a 4 normally open, double make contacts rated up to 3HP. It uses a solenoid type moving core design
More informationLimit Switches with Positive Opening Mechanism
Limit Switches with Positive Opening Mechanism LJA Series Positive opening mechanism Snap action limit switches with positive opening mechanism enables general industrial machines to comply with EC directives
More information(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
More information(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
More information(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
More informationApplication Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
More informationModel Number Structure
Small Sealed Switch D4E-@N Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth snap action
More informationHigh Efficiency POL Module
High Efficiency POL Module MPX24AD05-TU FEATURES: High Power Density Power Module 5A Maximum Load Input Voltage Range from 9.0V to 40.0V Output Voltage Range from 1.0V to 5.0V Excellent Thermal Performance
More informationSPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.)
SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS - 87151-XXX9 REVISION: D PRODUCT NAME:
More informationFAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
More informationHP420X. 5A, High Efficiency POL Module GENERAL DESCRIPTION: FEATURES: APPLICATIONS: TYPICAL APPLICATION CIRCUIT & PACKAGE SIZE:
FEATURES: High Power Density Power Module 5A Maximum Load Input Voltage Range from 9.0V to 40.0V Output Voltage Range from 1.0V to 5.0V Excellent Thermal Performance 94% Peak Efficiency Enable Function
More informationModel Number Structure
Long-life Two-circuit Limit Switch WLM@ New Long-life Limit Switches Added to the Wide Variety of WL Models Improved resistance to abrasion and smoother movement in the head section means that a mechanical
More informationM3 Series Product. Class 0 - protection against electric shock relies upon basic insulation
Product Changeover circuit with rating 16A ong life snap action contacts mechanism Self-cleaning contact action Variety of actuators Screw, front screw or quick connect (faston) terminals dimensions according
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
More informationMiniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CE Series Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
More informationHERMETIC. Hermetic Connectors. High Performance Sealing Solutions
HERMETIC Hermetic Connectors High Performance Sealing Solutions Hermetic Connectors 38999 QPL Qualified Presentation Based on glass to metal seal technology, SOURIAU offers hermetic connectors to cover
More informationARinc 600 Series. Rack & Panel Rectangular Connector. Brief introduction. Specification. 1. Material and surface treatment. 3. Electric properties
ARinc 600 Series Rack & Panel Rectangular Connector Brief introduction Good performance of environment resistance 216 kinds of anti-misoperation styles High density up to 800 signal contacts Low insertion
More informationSOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low ESR
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low Ultra Low < 30 mω New E/7260 Case with < 18 mω Up to 5 Amps ripple current RoHS Compliant & Leadfree Termination (see www. kemet.com for
More informationLightened Thermal Clamps Amphenol Series LTC
Lightened Thermal Clamps Amphenol Series LTC MAIN CHARACTERISTICS MAXIMUM RELIABILITY QUICK LOCKING AND UNLOCKING : Unlike others on the market, Series LTC thermal clamps feature a quick, quarter-turn
More information4707 DEY ROAD LIVERPOOL, NY PHONE: (315) FAX: (315) M.S. KENNEDY CORPORATION MSK Web Site:
4707 DEY ROAD LIVERPOOL, NY 13088 PHONE: (315) 701-6751 FAX: (315) 701-6752 M.S. KENNEDY CORPORATION MSK Web Site: http://www.mskennedy.com/ Voltage Regulators By Brent Erwin, MS Kennedy Corp.; Revised
More informationGETWELL TECH.(H.K.) LTD.
GETWELL TECH.(H.K.) LTD. 2.5 Pitch 4 Pin Battery Connector Product Specification PART No: DC-0010S00-067-102 Rev.: A Page:1/ 5 Approved/Date Checked/Date Written/Date 1.0 Scope : This specification covers
More information