Table of Contents. Douglas Barwick

Transcription

1 arwick c Ø Y EQUIP. SUPPLIER 500 ERED SLUDGE DIGESION NK No X Ø CON. ON D-170 GROU RING 6 x 50 (YP.2) ERED SLUDG2 DIGESION NK No.2 Y EQUIP. SUPPLIER Engineered Pipe and Fittings Stainless Steel and Carbon Steel Catalog CE-201 Rev. 1

2 able of Contents inc. Overview I.D. SM 77 & 77 Suary of Specification Pipe Elbows Elbows Mitred Elbows Reduceurs...2- ees Cross Laterals Wyes Pressed Collars ngle Collars Stub-Ends ype '' '' acking Flanges Slip-on acking Flanges lind Flanges SM 77 & 77 Suary of Specification Pipe Elbows Elbows Mitred Elbows Reduceurs...3- ees Cross Laterals Wyes Pressed Collars ngle Collars acking Flanges Slip-on acking Flanges lind Flanges SM/SME /S-312, /S-03, /S-105 (galv) & /S12 Suary of Specification...-1 Pipe Elbows Elbows...-5 ees Reducters Cap Stub-end SM/SME /S-312, /S-03, /S-105 (galv) & /S12 (con t) Coupling Lap-joint Flanges Class 150 galvanised Lap-joint Flanges Class 300 galvanised Flanges Class 150, Stainless Steel Flanges Class 300, Stainless Steel Flanges...-1 SM/SME /S-53, /S-106, /S-23 & /S105. Suary of Specification Pipe Elbows Elbows Long Radius 10 Returns Short Radius 10 Returns Reduceur ee Cap Coupling Flanges Class Flanges Class ccessories Manways Quick Opening Clean-Outs Grooved Style Clean-Outs Diamond Clean-Outs...6- Cut and Roller Groove daptor Metal to Metal flanges Pipe Hangers Spacers...6- echnical Section I.D Maximum Working Pressure Maximum Working Pressure Collars & Flanges Maximum Working Pressure Reinforcement for Vaccum Condition...7- Maximum Unsupported Span able Pipe & Fittings olerance Spooling Fabrication olerance arwick c.

3 Overview Welcome to c. s a result of the merger between rothers and Henderson arwick in 2000 c. has become a leader in the manufacture of stainless steel pipe and fittings. c. boasts more than a century of growth and expertise in the fabrication of stainless steel metal products. Products c. stands at the North merican forefront in terms of standards, diversity and product range. Items listed in this standard products catalogue are coonly kept in stock in grades 30L & 316L and in the thicknesses coon to the North merican market. c. s expertise extends far beyond standard products. It also includes the fabrication of piping products that meet our customers special needs in terms of size, thickness and special alloys such as 317L, 90L, 25SMO, Duplex, Monel, conel, etc. Specifications include SM 312, 03, 77 and 77 with larger diameter pipe manufactured in single random 20 ft lengths. Our pipe and fittings are acid pickled to conform with specification SM 30. Upon request our stainless steel products may include NSF 61 and 372 certification. Drawing c. can provide isometric drawings per customer's specifications at a low cost, using both CDPIPE and UOCD software. his service allows our customer better planning of priorities and improves production lead-time. Shop sketches are also prepared for every spool assembly, facilitating assembly operations and eliminating most errors that could otherwise take place. Spooling / Fabrication c. also offers shop spooling of pipelines in accordance with drawings and specifications. his is, by far, more economical than field assembly and assures a timely supply and quality of workmanship. When c. supplies spooling, several additional cost savings are achieved: - Scrap reduction. - Site inventory control - Re-stocking charges & transportation of surplus material in both directions. We also offer our expertise in the following areas: - SME 31.1 & SME pressure vessel. - Cotton ball finish. - Capacity for major projects. - Storage tanks. -Custom made pieces manufactured to our customer's specifications. Quality ssurance t c., we value product quality and customer satisfaction. Our technicians design quality assurance procedures and ensure that they are rigorously applied. c. also ensures that inspections of both material and workmanship are carried out in accordance with the required quality assurance programs. arwick c. 1-1

4 I.D. Pipe SM 77 & Fittings SM 77 Suary of specification. Our I.D. (side Diameter) pipes and fittings in austenitic stainless steel are manufactured as per specification SM 77 for pipe and SM 77 for fittings. With our high-tech equipment, pipe and fittings offer an excellent price/quality ratio. Pipe and fittings in inventory of this class are manufactured from SM 20-30L & 316L base material. Other alloys are available upon request. Pipes and fittings manufactured as per SM 77 & SM 77 specifications are coonly used in pulp and paper mills, water treatment plants and other industries where corrosion resistance is not essential [See Note (1)]. Longitudinal seams are welded as per our qualified welding procedures using automatic or semi-automatic state of the art plasma welding torches in a single or double set-up. his welding procedure reduces greatly the effects of carbides precipitation in the heated affected zone. Pipe and fittings can be supplied in a wide range of diameters and wall thicknesses. Dimensions and tolerances of fabricated fittings are in the technical section, see Page 7-6. Special fittings can be supplied to customer design and size when required. Only visual examination is performed on fitting. Pipe and fittings are also pickled and passivated as per SM -30 to maintain corrosion resistance and to prevent surface discoloration from free iron oxidation. ase metal analysis is traceable to the original mill certificates. s per SM -77 & -77, tolerance of nominal thickness permissible shall be ± 12.5% Pipe and fittings are normally furnished in square cut ends but can also be provided with beveled ends. Note 1. For heat treated pipe and fittings, please refer to section.0 of SM -312 and SM -03. For each lot of pipe, a tension, reverse, forward bend tests is performed. Welded elbows can be supplied as smooth flow or mitred construction, reducers are supplied as conical, tees, crosses and laterals are supplied as nozzle-welded. arwick c. 2-1

5 I.D. Pipes SM 77 I.D. hk. I.D. side Diameter hickness and 1 gauge 11 gauge 10 gauge 3/16'' th. 1/'' th in / in / in / in / in / 6.3 ches lb / ft kg / m lb / ft kg / m lb / ft kg / m lb / ft kg / m lb / ft kg / m 1 1/ / a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section.. d. Other diameter and thickness available upon request arwick c. 2-3

6 I.D. 90 Elbows SM 77 I.D. side Diameter [Nominal hickness] 90 Elbow, Long Radius 90 Elbow, Short Radius 1 Gauge lb kg lb kg 1 1/ / I.D Elbow Long Radius /16" /16" /16" /" /16" I.D.. 90 Elbow Short Radius /" /16" /" /16" /" a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. 2- c.

7 I.D. 5 Elbow s SM 77 I.D. side Diameter [Nominal hickness] 5 Elbow Gauge lb kg 1 1/ / /16" /16" I.D /16" /" /16" /" /16" /" /16" /" a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. arwick c. 2-5

8 I.D. Mitred Elbows SM 77 able I.D. side Diameter 90 Elbow Long Radius 90 Elbow Short Radius 5 Elbow Gauge lb kg lb kg lb kg 1 1/ / / / / / / /16 3/16 3/16 3/ / 1/ 1/ 1/ c.

9 I.D. Mitred Elbows SM 77 I.D. side Diameter [Nominal hickness] 90 Elbow Long Radius 90 Elbow Short Radius 5 Elbow C Gauge 1 1/ / / / / / / / /16 3/16 3/16 3/ / 1/ 1/ 1/ C I.D. 90 Mitred Elbow Long Radius I.D. 90 Mitred Elbow Short Radius C I.D. 5 Mitred Elbow a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. arwick c. 2-7

10 I.D. Reducers SM 77 I.D. side Diameter [Nominal hickness] Gauge Po lb kg I.D. Concentric reducer I.D. Eccentric Reducer 1 1/ / / / / / / / / / / / / / / / a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. 2- c.

11 I.D. ees & Cross SM 77 I.D. side Diameter [Nominal hickness] ee Cross Gauge lb kg lb kg 1 1/ / / / / / / / / / / / / / / / a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. ee ee with reinforcement I.D. I.D. I.D. Note: 1. he addition of reinforcement may be necessary. Upon request, the verification can be performed by arwick, please contact a technical representative for more information. Cross [Note (1)] arwick c. 2-9

12 I.D. Laterals SM 77 I.D. side Diameter [Nominal hickness] C C 5 Lateral C 5 Lateral with reinforcement I.D. I.D. Gauge lb kg 1 1/ / / / / / / / / / / / / / / / a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request c.

13 I.D. Wyes SM 77 I.D. side Diameter [Nominal hickness] Gauge lb kg 1 1/ / / / / / / / / / / / / / / / I.D. a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. e. he addition of reinforcement may be necessary. Upon request, the verification can be performed by, please contact a technical representative for more information. arwick c. 2-11

14 I.D. Pressed Collars SM 77 I.D. side Diameter [Nominal hickness] I.D. Pressed Collars Gauge. lb kg 1 1/ / I.D. [side Diameter] [Nominal hickness] C Gauge. lb kg I.D. C Long Neck Collars ype C a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section c.

15 I.D. ngle Collars SM 77 I.D. side Diameter ngle Dimension -C-. lb kg / x 3/ x 1/ 19 x 19 x x 1 x 1/ 25 x 25 x x 1 x 1/ 25 x 25 x Outside of pipe diameter + 1/16" (1. ) Outside of pipe diameter + 1/" (3.2 ) 1 x 1 x 1/ 25 x 25 x x 1 x 3/16 25 x 25 x / x 1 1/ x 1/ 32 x 32 x / x 1 1/ x 3/16 32 x 32 x /2 x 1 1/2 x 1/ 3 x 3 x /2 x 1 1/2 x 3/16 3 x 3 x /2 x 1 1/2 x 1/ 3 x 3 x /2 x 1 1/2 x 3/16 3 x 3 x /2 x 1 1/2 x 1/ 3 x 3 x /2 x 1 1/2 x 3/16 3 x 3 x /2 x 1 1/2 x 3/16 3 x 3 x /2 x 1 1/2 x 1/ 3 x 3 x /2 x 1 1/2 x 3/16 3 x 3 x /2 x 1 1/2 x 1/ 3 x 3 x /2 x 1 1/2 x 3/16 3 x 3 x /2 x 1 1/2 x 1/ 3 x 3 x x 2 x 3/16 51 x 51 x x 2 x 1/ 51 x 51 x x 2 x 1/ 51 x 51 x x 2 x 3/ 51 x 51 x x 2 x 1/ 6 x 6 x x 2 x 3/ 6 x 6 x /2 x 2 1/2 x 1/ 6 x 6 x /2 x 2 1/2 x 3/ 6 x 6 x /2 x 2 1/2 x 1/ 6 x 6 x /2 x 2 1/2 x 3/ 6 x 6 x C I.D. utt Weld ngle Collars For using with acking Flanges See P Slip-on ngle Collars For using with Slip-on acking Flange See P a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. arwick c. 2-13

16 I.D. Stub-End ype I.D. side Diameter t [Nominal hickness] Weigth. lb kg " " Not less than '' t ' I.D t See detail '''' Detail '''' [Note 1] a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. [] not less than [t]. c. he two faces are machined, the contact face is machined between 125 and 250 microinches (RH) d. Solution nnealing on request. e. Other diameter, thicknesses and sizes available upon request. Note: 1. evel for thickness (t) > 1/ (3) 2-1 c.

17 I.D. acking Flanges Nominal I.D. Diameter # of holes lb kg 1 1/ / I.D. a. Material: Carbon Steel with chemical composition and mechanical strength equivalent to SM 105. b. Finish: Galvanized to SM 123 c. Drilling: 1 1/2'' to 2" SME 16.5 Class150, 30" to " SME 16.7 Class150 serie "" d. Suggested Maximum Working Pressure : See technical section. e. Other diameter and thickness available upon request. arwick c. 2-15

18 I.D. Slip-on acking Flanges. I.D. Nominal I.D. Diameter # of holes lb kg a. Material: Carbon Steel with chemical composition and mechanical strength equivalent to SM 105. b. Finish: Galvanized to SM 123 c. Drilling: 1 1/2'' to 2" SME 16.5 Class150, 30" to " SME 16.7 Class150 serie "" d. Suggested Maximum Working Pressure : See technical section. e. Other diameter and thickness available upon request c.

19 lind Flanges Nominal C Diameter # of holes lb kg 1 1/ / /16'' C a. Material: Carbon Steel with chemical composition and mechanical strength equivalent to SM 105 and 316L Stainless Steel linner. b. Finish: Galvanized to SM 123 c. Drilling: 1 1/2'' to 2" SME 16.5 Class150, 30" to " SME 16.7 Class150 serie "" d. Suggested Maximum Working Pressure : See technical section. e. Other diameter and thickness available upon request. arwick c. 2-17

20 Pipe SM 77 & Fittings SM 77 Suary of specifications Our (1) (Nominal Pipe Size) pipes and fittings in austenitic stainless steel are manufactured as per specification SM 77 for pipe and SM 77 for fittings. With our high-tech equipment, pipe and fittings offer an excellent price/quality ratio. Pipe and fittings in inventory of this class are manufactured from SM 20 30L & 316L base material. Other alloys are available upon request. Pipes and fittings manufactured as per SM -77 & SM -77 specifications are coonly used in pulp and paper mills, water treatment plants and other industries where corrosion resistance is not essential (2). Longitudinal seams are welded as per our qualified welding procedures using automatic or semi-automatic state of the art plasma welding torches in a single or double set-up. his welding procedure reduces greatly the effects of carbides reprecipitation in the heated affected zone. Pipe and fittings can be supplied in a wide range of diameters and wall thicknesses. Dimensions and tolerances of fabricated fittings are in the technical section, see (P.7-6). Special fittings can be supplied to customer design and size when required. Only visual examination is performed on fitting. Pipe and fittings are also pickled and passivated as per SM -30 to maintain corrosion resistance and to prevent surface discoloration from free iron oxidation. ase metal analysis is traceable to the original mill certificates. s per SM -77 & -77, tolerance of nominal thickness permissible shall be ± 12.5% Pipe and fittings are normally furnished in square cut ends but can also be provided with beveled ends. Notes: 1. See also section.0 for SM 312 and SM For pipe and fitting heat treated please refer to section.0 SM 312 & 03. For each lot of pipe, a tension, reverse, forward bend tests is performed. Welded elbows can be supplied as smooth flow or mitered construction, tees, crosses and laterals are supplied as nozzle-welded. Reducers are supplied as conical. arwick c. 3-1

21 Pipe SM 77 Nominal Pipe Size Outside Diameter [Nominal (Épaisseur hickness] des parois) Nominal Pipe Size Outsude Diameter E [Nominal (Épaisseur hickness] des parois) Ga / Sch lb / ft kg / m 3/ /2 2 1/ / Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Ga / Sch lb / ft kg / m Notes: 1. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. 2. Suggested Maximum Working Pressure : See technical section. 3. Fabrication olerance: See technical section... Other diameter and thickness available upon request Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S /'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' /'' /16'' /16'' /'' /16'' /16'' /'' /16'' arwick c. 3-3

22 90 Elbows SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] 90 Elbow Long Radius 90 Elbow Short Radius 1 Ga / Sch lb kg lb kg 1 90 Elbow (Long Radius) 90 Elbow (Short Radius) Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S /'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Short Radius Elbows are available only in Sch 5S and 10S 3- c.

23 5 Elbows SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] 5 Elbow Ga / Sch lb kg Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S /'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. arwick c. 3-5

24 Mitred Elbows SM 77 able Nominal Pipe Size 90 Elbow Long Radius 90 Elbow Short Radius 5 Elbow lb kg lb kg lb kg Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S /'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' /'' /16'' /16'' /'' /16'' c.

25 Mitred Elbows SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] 90 Elbow Long Radius 90 Elbow Short Radius 5 Elbow C Ga / Sch Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S /'' Sch 5S Sch 10S /16'' 0.1. Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' /'' /16'' /16'' /'' /16'' a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. 90 Mitred Elbow Long Radius 90 Mitred Elbow Short Radius C C 5 Mitred Elbow arwick c. 3-7

26 Reducers SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] Concentric Reducer Eccentric Reducer Ga / Sch lb Kg Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S /'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' /'' /16'' /16'' /'' /16'' a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. 3- c.

27 ees & Crosses SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] ee Cross Ga / Sch Po Po lb kg lb kg Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S /'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' /'' /16'' /16'' /'' /16'' ee ee with reinforcement a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. Note: 1. he addition of reinforcement may be necessary. Upon request, the verification can be performed by arwick, please contact a technical representative for more information. Cross [Note (1)] arwick c. 3-9

28 Laterals SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] C C 5 Lateral C 5 Lateral with reinforcement Ga / Sch lb kg Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S /'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' /'' /16'' /16'' /'' /16'' a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request c.

29 Wyes SM 77 Nominal Pipe Size Outside Diameter [Nominal hickness] Ga / Sch lb kg Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S Sch 5S Sch 10S /'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' Sch 5S Sch 10S /16'' /'' /16'' /16'' /'' /16'' a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. e. he addition of reinforcement may be necessary. Upon request, the verification can be performed by, please contact a technical representative for more information. arwick c. 3-11

30 Pressed Collars SM 77 Nominal Pipe Size Outside Diameter [Noninal hickness] lb kg Pressed Collars 1 1/ /'' /'' / /'' /'' /'' /'' /'' /'' /'' /'' Long Neck Collars ype ''C'' C Nominal Pipe Size Outside Diameter [Nominal hickness] Sch lb kg S S S S S S C a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section c.

31 ngle Collars SM 77 Nominal Pipe Size Outside Diameter ngle Dimensions -C-. lb kg / x 3/ x 1/ 19 x 19 x x 1 x 1/ 25 x 25 x x 1 x 1/ 25 x 25 x x 1 x 1/ 1 1/ x 1 1/ x 1/ 1 1/ x 1 1/ x 1/ 1 1/2 x 1 1/2 x 1/ 1 1/2 x 1 1/2 x 1/ 1 1/2 x 1 1/2 x 3/16 1 1/2 x 1 1/2 x 3/16 1 1/2 x 1 1/2 x 3/16 2 x 2 x 3/16 2 x 2 x 1/ 2 x 2 x 1/ 2 1/2 x 2 1/2 x 1/ 2 1/2 x 2 1/2 x 1/ 25 x 25 x x 32 x x 32 x x 3 x x 3 x x 3 x. 3 x 3 x. 3 x 3 x. 51 x 51 x. 51 x 51 x x 51 x x 6 x x 6 x x 1 x 3/16 1 1/ x 1 1/ x 3/16 1 1/ x 1 1/ x 3/16 1 1/2 x 1 1/2 x 3/16 1 1/2 x 1 1/2 x 3/16 1 1/2 x 1 1/2 x 1/ 1 1/2 x 1 1/2 x 1/ 1 1/2 x 1 1/2 x 1/ 2 x 2 x 1/ 2 x 2 x 3/ 2 x 2 x 3/ 2 1/2 x 2 1/2 x 3/ 2 1/2 x 2 1/2 x 3/ 25 x 25 x. 32 x 32 x. 32 x 32 x. 3 x 3 x. 3 x 3 x. 3 x 3 x x 3 x x 3 x x 51 x x 51 x x 51 x x 6 x x 6 x C utt Weld ngle Collars (Use with acking Flanges) P. 3-1 Slip-on ngle Collars (Use with Slip-on acking Flanges) P a. Material: Stainless Steel 30L, 316L, 317L, Other alloys available upon request. b. Suggested Maximum Working Pressure : See technical section. c. Fabrication olerance: See technical section. d. Other diameter and thickness available upon request. arwick c. 3-13

32 acking Flanges I.D. Nominal Pipe Size I.D. # of holes lb kg 1 1/ / a. Material: Carbon Steel with chemical composition and mechanical strength equivalent to SM 105. b. Finish: Galvanized to SM 123 c. Drilling: 1 1/2'' to 2" SME 16.5 Class150, 30" to " SME 16.7 Class150 serie "" d. Suggested Maximum Working Pressure : See technical section. e. Other diameter and thickness available upon request. 3-1 c.

33 Slip-on Flanges Nominal Pipe Size I.D. # of holes lb kg I.D. a. Material: Carbon Steel with chemical composition and mechanical strength equivalent to SM 105. b. Finish: Galvanized to SM 123 c. Drilling: 1 1/2'' to 2" SME 16.5 Class150, 30" to " SME 16.7 Class150 serie "" d. Suggested Maximum Working Pressure : See technical section. e. Other diameter and thickness available upon request. arwick c. 3-15

34 ride pleine lind Flanges 1/16'' C Nominal Diameter # of C holes lb kg 1 1/ / a. Material: Carbon Steel with chemical composition and mechanical strength equivalent to SM 105 and 316L Stainless Steel linner. b. Finish: Galvanized to SM 123 c. Drilling: 1 1/2'' to 2" SME 16.5 Class150, 30" to " SME 16.7 Class150 serie "" d. Suggested Maximum Working Pressure : See technical section. e. Other diameter and thickness available upon request c.

35 Pipe, Fitttings and Flanges. SM 312, 03, 12. SME S-312, S-03, S-12. Specifications suary Pipes, fittings and flanges in this section are usually intended for high-temperature and general corrosive operations. With our cutting edge technology equipment our pipes and fittings offer an excellent price/quality ratio. ll our pipes and fittings are manufactured, heat treated, inspected, tested, and marked according to the requirements of the respective specifications, thereafter a Manufacturer est Report is issued for each batch. pipes and fittings are made from base materials SM L & 316L; other alloys are available upon request. his section includes: - SM 312 and SME S-312 welded pipes [Note (1 and 2)] - SM 03 and SME S-03 fittings Grade WP, Class-S, W, WX and WU (See able 1 for a brief description of the class) - SM 12 and SME S-12 stainless steel flanges - SM 105 and SME S-105 carbon steel galvanized lap-joint flange [Nominal Pipe Size] diameter and thickness [Note ()] pipes and fittings are governed by SME he maximum allowable operating pressure for pipes shall be calculated according to the pipe equation with or without longitudinal weld (as applicable) of the latest version of the applicable SME code. he dimensions of the fittings are governed by SME 16.9 he fittings are supplied with bevelled ends. he maximum allowable working pressure for fittings WP is equivalent to the one for pipes of the same category (e.g.: ype of construction, diameter, thickness, chemical and mechanical requirements). Dimensions and maximum allowable working pressure for flanges are shown inside the SME 16.5 Notes: 1. SM 312 and SME S-312 seamless pipes can be provided upon request. 2. SM 269 and SM 09 pipes can be supplied upon request. 3. Non-destructive examination is not performed on class'' W'' fittings when the welding process is done without filler addition.. accordance with specifications SM 312 / SME S-312 and SM 03 / SME S-03 allowable tolerance will never be less than 7.5% of the nominal thickness at any measured point. Grade Class Construction Nondestructif Examination WP S Seamless None WP W Welded Radiography or Ultrasonic (3) WP WX Welded Radiography WP WU Welded Ultrasonic able 1 arwick c. -1

36 Pipe SM 312 & SME S-312 Nominal Pipe Size Outside Diameter Nominal hickness and Schedule 5S Schedule 10S Schedule 0S lb / ft kg / m lb / ft kg / m lb / ft kg / m 3/ / / / a. Nominal diameter and thickness: ccording to SME b. hickness olerance: ccording to / S-312 will never be less than 7.5% of the nominal thickness. c. Material: Stainless Steel P-30L and P-316L, other alloys are available upon request. d. Maximum operating pressure: Must be calculated using the latest version of the applicable SME code. arwick c. -3

37 90 Elbows SM 03 & SME S-03 Nominal Pipe Size Outside Diameter [Nominal hickness] 90 Elbow Long Radius 90 Elbow Short Radius 1 Sch lb kg lb kg 1 90 Elbow (Short Radius) 90 Elbow (Short Radius) 5S / S S S S S S / S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S a. Material: Stainless Steel 30L, 316L. Other alloys available on request. b. Grade WP - Class W, WX, WU, (Class S on request). c. Diameter and thickness: SME d. Dimensions: SME 16.9 e. hickness olerance: ccording to / S-03 will never be less than 7.5% of the nominal thickness. f. Dimensional olerance: SME 16.9, able 13. g. evel: SME 16.9, able 12 h. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. - c.

38 5 Elbows SM 03 & SME S-03 Nominal Pipe Size Outside Diameter [Nominal hickness] Sch Po lb kg 1 1/ / S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S a. Material: Stainless Steel 30L, 316L. Other alloys available on request. b. Grade WP - Class W, WX, WU, (Class S on request). c. Diameter and thickness: SME d. Dimensions: SME 16.9 e. hickness olerance: ccording to / S-03 will never be less than 7.5% of the nominal thickness. f. Dimensional olerance: SME 16.9, able 13. g. evel: SME 16.9, able 12 h. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. arwick c. -5

39 ees SM 03 & SME S-03 Nominal Pipe Size Run Nominal Pipe Size Outlet C lb kg lb kg 1/ / / / / / / / / / / / / / / / / / / M SCH 10S SCH 0S M M C C C C Straight ee Reducing ee -6 c.

40 ees SM 03 & SME S-03 Nominal Pipe Size Run Nominal Pipe Size Outlet C SCH 10S SCH 0S lb kg lb kg M a. Material: Stainless Steel 30L, 316L. Other alloys available on request. b. Grade WP - Class W, WX, WU, (Class S on request). c. Diameter and thickness: SME d. Dimensions: SME 16.9 e. hickness olerance: ccording to / S-03 will never be less than 7.5% of the nominal thickness. f. Dimensional olerance: SME 16.9, able 13. g. evel: SME 16.9, able 12 h. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. arwick c. -7

41 Reducers SM 03 & SME S-03 Nominal Pipe Size Outside Diameter [Nominal hickness] H H Concentric Reducer H Eccentric Reducer Sch lb kg 5S / S S S S S S / S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S a. Material: Stainless Steel 30L, 316L. Other alloys available on request. b. Grade WP - Class W, WX, WU, (Class S on request). c. Diameter and thickness: SME d. Dimensions: SME 16.9 e. hickness olerance: ccording to / S-03 will never be less than 7.5% of the nominal thickness. f. Dimensional olerance: SME 16.9, able 13. g. evel: SME 16.9, able 12 h. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. - c.

42 Caps SM 03 & SME S-03 Nominal Pipe Size Outside Diameter [Nominal hickness] Identification lb kg 5S / S S S S S S / S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S a. Material: Stainless Steel 30L, 316L. Other alloys available on request. b. Grade WP - Class W, WX, WU, (Class S on request). c. Diameter and thickness: SME d. Dimensions: SME 16.9 e. hickness olerance: ccording to / S-03 will never be less than 7.5% of the nominal thickness. f. Dimensional olerance: SME 16.9, able 13. g. evel: SME 16.9, able 12 h. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. E Ellipsoidal Shaped Cap E arwick c. -9

43 Stub-Ends SM 03 & SME S-03 Nominal Pipe Size Outside Diameter [Nominal hickness] F G R Sch. Po. lb kg R. G Stub-end illustrated with Galvanized Lap-joint Flange (See P -12 & -13 for Lap-joint detail) F 1 1/ / S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S a. Material: Stainless Steel 30L, 316L. Other alloys available on request. b. Grade WP - Class W, WX, WU, (Class S on request). c. Diameter and thickness: SME d. Dimensions: SME 16.9 (Short Pattern) e. hickness olerance: ccording to / S-03 will never be less than 7.5% of the nominal thickness. f. Dimensional olerance: SME 16.9, able 13. g. evel: SME 16.9, able 12 h. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. -10 c.

44 Couplings SM 12 & SME S-12 SME 16.11, Class 3000 Nominal Pipe Size C D E F G H Coupling Half Coupling 1/ / / / / / / / lb kg lb kg G G C E H E E D F D F hreaded Coupling hreaded Half-Coupling Socket-Welding Coupling Socket-Welding Half-Coupling lso available, tegrally Reinforced Forged ranch Outlet Fittings. (/S-12, MSS-SP 97) uttwelding hreaded Socket Welding arwick c. -11

45 Lap-joints SM 105 & SME S-105 Class 150, Galvanized Nominal Pipe Size O F2 X Y2 2 r W Diameter of olt Circle Diameter of olt Holes Number of olts lb kg 1 1/ / / / / / / / / / / / / / / O W F2 R X 2 Y2 a. Material: Forged Carbon Steel, SM 105 and SME S-105 b. Finish: Galvanized to SM 123 c. Dimension: SME 16.5 Class 150 d. Maximum llowable Working Pressure: See SME 16.5 material group,able F2-1.1 material group 1.1, or contact our technical representatives. e. Other classes available on request. -12 c.

46 Lap-joints SM 105 & SME S-105 Class 300, Galvanized Nominal Pipe Size O F2 X Y2 2 r W Diameter of olt Circle Diameter of olt Holes Number of olts lb kg 1 1/ / / / / / / / / / / / / / / / O W a. Material: Forged Carbon Steel, SM 105 and SME S-105 b. Finish: Galvanized to SM 123 c. Dimension: SME 16.5 Class 300 d. Maximum llowable Working Pressure: See SME 16.5 material group,able F2-1.1 material group 1.1, or contact our technical representatives. e. Other classes available on request. F2 R X 2 Y2 arwick c. -13

47 SM 12 & SME S-12 Class 150 ore Nominal Pipe Size O F1 F2 X Y1 Y2 Y r D R Po Po 3/ / / / Must be specified at time of purchase -1 c.

48 Flanges SM 12 & SME S-12 Class 150 Drilling pproximate O W Diameter of olt Cicle Diameter of olt Holes Number of bolts hreaded Slip-on Socket Welding Lap Joint Welding Neck lind Nominal Pipe Nominal Size Pipe () Size Y1 W X 1 lb kg lb kg lb kg lb kg / / / / / / / / / / / / / / / / / / / / F1 Y2 F2 Y3 F1 Y1 F1 Y1 F1 R Slip-on Flange O W X 2 Lap-Joint Flange O W X 3 R Welding Neck Flange O W X 1 D 3 R Socket Weld Flange O W X R hreaded Flange O W a. Material: Stainless Steel F30L & F316L. (Other grades available on request). F1 R b. Dimension: SME 16.5 Class 150 (Others Class available on request). lind Flange c. Maximum llowable Working Pressure: See SME 16.5 able F2-2.3 material group 2.3, or contact our technical representatives. arwick c. -15

49 Flanges SM 12 & SME S-12 Class 300 ore Nominal Pipe Size O F1 F2 X Y1 Y2 Y r D R 3/ / / / Must be specified at time of purchase -16 c.

50 Flanges SM 12 & SME S-12 Class 300 Drilling pproximate O W Diameter of olt Cicle Diameter of olt Holes Number of bolts hreaded Slip-on Socket Welding Lap Joint Welding Neck lind Nominal Pipe Size () Y1 W X 1 lb kg a. Material: Stainless Steel F30L & F316L. (Other grades available on request). b. Dimension: SME 16.5 Class 300 (Others Class available on request). c. Maximum llowable Working Pressure: See SME 16.5 able F2-2.3 material group 2.3, or contact our technical representatives. lb kg lb kg lb kg / / / / / / / / / / / / / / / / / / / / / F1 Y2 F2 Y3 F1 Y1 F1 Y1 F1 F1 R Slip-on Flange O W X 2 Lap-Joint Flange O W X 3 R Welding Neck Flange O W X 1 D 3 R Socket Weld Flange O W X R hreaded Flange O W R lind Flange arwick c. -17

51 Flanges Description Slip-On Flanges he slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-on flanges are all bored slightly larger than the of the matching pipe. hey are preferred over welding neck flanges by many users due to their lower initial cost, but final installation cost is probably not much less than that of the welding neck flange because of the additional welding involved. Lap-Joint Flanges he lap joint flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange face. his radius is necessary to have the flange accoodate a lap joint stub end. Normally, a lap joint flange and stub end are mated together in an assembly system. Welding Neck Flanges he welding neck flange is normally referred to as the ''high hub'' flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentration at the base of the flange. he welding neck flange is the best designed butt-welding flange of those currently available because of the design. Socket Welding Flanges he socket welding flange is similar to a slip-on flange except it has a bore and a counter bore dimension. he counter bore is slightly larger than the of the matching pipe, allowing the pipe to be inserted into the flange similar to a slip-on flange. he diameter of the smaller bore is the same as the I.D. of the matching pipe. restriction is built into the bottom of the bore which sets as a shoulder for the pipe to rest on. his eliminates any restriction in flow when using a socket welding flange. hreaded (Screwed) Flanges he threaded flange is similar to the slip-on flange, but the bore is threaded. Its chief merit is that it can be assembled without welding, explaining its use in low pressure services at ordinary atmospheric temperatures, and in highly explosive areas where welding create a hazard. lind Flanges he blind flange is a flange without a bore. It is used to close off the ends of a piping system and / or a pressure vessel opening. It also permits easy access to the interior of line or vessel once it has been sealed and must be reopened. -1 c.

52 Carbon Steel Pipe, Fittings and Flanges Suary of specifications [Notes (1) (2)] icable. is a carbon steel products distributor. Given the numerous specifications concerning Carbon Steel Pipes we keep in stock the most requested pipes as mentioned below. SM 53 / SME S-53 ype-e and S, Grade hese specifications apply to the pipe with or without longitudinal weld. See able 1 for types and grades. he pipes of this specification can be welded, bended, flanged or other forming operations and are generally used for applications such as steam, compressed air, water and gas pipelines. SM 106 / SME S-106, Grade his specification applies to seamless pipes (SMLS) Grade or, which are generally used for specific purposes, in particular for applications where temperatures are high. he pipes of this specification can be welded, bended, flanged or other forming operations. SM 23 / SME S-23 Fittings he fittings of this specification can be built with or without welding. hese fittings are designed for pressure piping and pressure vessels for use where service temperatures are moderate to high. he maximum allowable operating pressure for fittings shall be calculated according to the pipe equation with or without longitudinal weld (as applicable) of the latest version of the applicable SME code. Flanges and couplings, SM 105 / SME S-105 Flanges and coupling of this specification are of forged carbon steel for applications in ambient to elevated temperatures. he maximum allowable working pressure for flanges are shown inside the SME 16.5 code. he maximum allowable working pressure for pipes shall be calculated according to the pipe equation with or without longitudinal weld (as applicable) of the latest version of the applicable SME code. able 1 ype Construction Grade F Continous Weld (CW) E Electric Resistance Weld (ERW) & (3) S Seamless (SMLS) & (3) Notes: 1. Our carbon steel pipes and fittings are available only in our oisbriand (QC) warehouse. 2. he brief descriptions should be verified before the work is started. 3. Pipes of grade in stock only. On request Grade can be provided. arwick c. 5-1

53 Pipes SM 106 / 53 & SME S-106 / S-53 Nominal Pipe Size Outside diameter Nominal hickness and Standard Extra Strong Poids lb / ft kg / m lb / ft kg / m 1/ / / / / / Specification ype of Pipe Grade able 1 SM 53 SME S 53 SM 106 SME S 106 ype - E Electric Resistance Weld (ERW) ype - S Seamless (SMLS) a. Nominal Diameter & hickness: ccording to SME b. hickness olerance: ccording to / S-106 and / S-53 will never be less than 7.5% of the nominal thickness. c. Material: vailable as shown in able 1. Other specifications, types and grades are available upon request. d. Length: Single random lengths from 16 to 22 ft. Double random lengths from 22 ft available on request e. Maximum operating pressure: Must be calculated using the latest version of the applicable SME code. arwick c. 5-3

54 90 Elbows SM 23 & SME S Elbow (Long Radius) 90 Elbow (Short Radius) Nominal Pipe Size Outside Diameter [Nominal hickness] 90 Elbow Long Radius 90 Elbow Short Radius Identification lb kg lb kg 1/2 3/ SD XS SD XS SD XS / SD XS / SD XS SD XS / SD XS SD XS / SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. 5- c.

55 5 Elbows SM 23 & SME S-23 Nominal Pipe Size Outside Diameter [Nominal hickness] 1/ / / / / / Identification Po lb kg SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. arwick c. 5-5

56 Long Radius10 Return Elbows SM 23 & SME S-23 Nominal Pipe Size Outside Diameter [Nominal hickness] O 10 Return Long Radius K O K Identification lb kg 1/2 3/ SD XS SD XS / 1 1/ / / SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. 5-6 c.

57 Short Radius10 Return Elbows SM 23 & SME S-23 Nominal Pipe Size O.D Outside Diameter [Nominal hickness] 10 Return, Short Radius Identification lb kg 1/2 3/ SD XS SD XS SD XS / SD XS / SD XS SD XS / SD XS SD XS / SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS O K1 O K1 a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. arwick c. 5-7

58 Reducers SM 23 & SME S-23 Large Diameter Small Diameter H [Nominal] Standard [Nominal] Extra Strong lb kg lb kg 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / H H Concentric Reducer Eccentric Reducer 5- c.

59 Reducers SM 23 & SME S-23 Large Diameter Small Diameter H [Nominal] Standard [Nominal] Extra Strong lb kg lb kg 2 1/ / / a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. arwick c. 5-9

60 ees SM 23 & SME S-23 Run Outlet C M [Nominal] Standard [Nominal] Extra Strong lb kg lb kg 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / M M C C Straight ee C C Reducing ee 5-10 c.

61 ees SM 23 & SME S-23 lb kg lb kg Run Outlet 2 1/ / / C M [Nominal] Standard a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code. [Nominal] Extra Strong arwick c. 5-11

62 E Caps SM 23 & SME S-23 Nominal Pipe Size Identification lb kg SD / XS / / / / Outside Diameter 3/ [Nominal hickness] SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS SD XS E a. Material: SM 23 / SME S-23, Grade WP, Other alloys and grade available on request. b. Diameter and thickness: SME c. Dimensions: SME 16.9 d. hickness olerance: Will never less than 7.5% of the nominal thickness. e. Dimensional olerance: SME 16.9, able 13. f. evel End: SME 16.9, able 12. g. llowable Pressure Rating: Must be calculated using the latest version of the applicable SME code c.

63 Couplings SM 105 & SME S-105 SME 16.11, Class 3000 Nominal Pipe Size C D E F G H Coupling Half Coupling 1/ / / / / / / / lb kg lb kg G G C E H E E D F D F hreaded Coupling hreaded Half-Coupling Socket-Welding Coupling Socket-Welding Half-Coupling lso available, tegrally Reinforced Forged ranch Outlet Fittings. (/S-12, MSS-SP 97) uttwelding hreaded Socket Welding arwick c. 5-13

64 Flanges SM 105 & SME S-105 Class 150 ore Nominal Pipe Size O F1 F2 X Y1 Y2 Y r D R Po Po 3/ / / / Must be specified at time of purchase 5-1 c.

65 Flanges SM 105 & SME S-105 Class 150 Drilling pproximate O W Diameter of olt Cicle Diameter of olt Holes Number of bolts hreaded Slip-on Socket Welding Lap Joint Welding Neck lind Nominal Pipe Nominal Size Pipe () Size Y1 W X 1 lb kg a. Material: Forged Carbon Steel, SM 105 and SME S-105 b. Dimension: SME 16.5 Class 150 (Others Class available on request). c). Maximum llowable Working Pressure: See SME 16.5 able F2-1.1 material group 1.1, or contact our technical representatives. lb kg lb kg lb kg / / / / / / / / / / / / / / / / / / / / F1 Y2 F2 Y3 F1 Y1 F1 Y1 F1 F1 R Slip-on Flange O W X 2 Lap-Joint Flange O W X 3 R Welding Neck Flange O W X 1 D 3 R Socket Weld Flange O W X R hreaded Flange O W R lind Flange arwick c. 5-15

66 Flanges SM 105 & SME S-105 Class 300 ore Nominal Pipe Size O F1 F2 X Y1 Y2 Y r D R 3/ / / / Must be specified at time of purchase 5-16 c.

67 Flanges SM 105 & SME S-105 Class 300 Drilling pproximate O W Diameter of olt Cicle Diameter of olt Holes Number of bolts hreaded Slip-on Socket Welding Lap Joint Welding Neck lind Nominal Pipe Size () Y1 W X 1 lb kg a. Material: Forged Carbon Steel, SM 105 and SME S-105 b. Dimension: SME 16.5 Class 300 (Others Class available on request). c. Maximum llowable Working Pressure: See SME 16.5 able F2-1.1 material group 1.1, or contact our technical representatives. lb kg lb kg lb kg / / / / / / / / / / / / / / / / / / / / / F1 Y2 F2 Y3 F1 Y1 F1 Y1 F1 F1 R Slip-on Flange O W X 2 Lap-Joint Flange O W X 3 R Welding Neck Flange O W X 1 D 3 R Socket Weld Flange O W X R hreaded Flange O W R lind Flange arwick c. 5-17

68 Manways Dished cover Hinged arm side of tank ( Clear access ) Concrete wall of tank or Stainless steel tank Grout Ring ( Outside diameter ) Open position dished manway Closed position dished manway a. Design can be different from illustration. Contact DI representative for actual design. b. Material : Stainless Steel 30L, 316L. Other alloys available upon request. c. Dim '''' available from 2'' up to ''. Dim '''' from 20'' up to 2'' arwick c. 6-1

69 Quick Opening Clean-Out I.D. side Diameter Po. lb kg Fabricated for an easy installation at the end of pipe or on elbows. It offers a quick and easy access to the interior of pipe for inspection and cleaning. General Note: a. Material : Stainless Steel 30L 6-2 c.

70 Grooved Style Clean-Outs Nominal Diameter inches in in in Collar [Note (1)] SCH 0S Pipe he cover of this type of clean-out is provided with a snugly fitting plug, which provides a smooth bore on the interior of the pipe, thus eliminating stock hang-up. a. Material: Stainless Steel 316L. b. vailable upon request in larger size. Note: 1. Usually provided with a Victaulic collar Style 7 Snap-Joint. arwick c. 6-3

71 Diamond Clean-Outs Outside Weld side Weld Grinded smooth. Clean-out For installation on number 90 Elbows 5 Elbows Reducers Pipe in / in / in / in / in / # # 6 # # 10 # to to 1 6 & to 16 1 to 22 2 & larger 6 & to 16 1 to 22 2 & larger to to & to to & larger & to to & larger a. Constructed of all 316L Stainless Steel parts, including the wing nut. b. High sealing strengths (the higher the pressure the tighter cover seals). c. Permit quick flushing when installed on both sides of pumps and valves without removing bolted connections. d. Quick and easy visual access into piping systems, tanks and vessels. e. No tools required to open. 6- c.

72 Cut and Rolled Groove daptors SCH 0S I.D Pipe or Fitting SCH 0S I.D Pipe or Fitting 3" 3 1/2" From 3'' to 12'' in diameter From 1 Diameter and larger Cut Groove for use with I.D. Pipes and Fittings SCH 0S Cut Groove for use with Pipes and Fittings Sch 5S, 10S and 0S 3" 3'' Designated Lengths Rolled Groove and GS (1) for use with I.D. and Pipes and Fittings a. Material : Stainless Steel 30L, 316L. Other alloys available upon request. b. vailable from stock in sizes 3'' to 12'' with standard groove. c. Larger sizes and other adaptor styles available upon request for both I.D. & pipe. Note: 1. For use with Victaulic flexible and rigid collar GS (dvance Groove System) for 1 to 2, Sch 10S arwick c. 6-5

73 Metal to Metal Flange. " Galvanized Steel acking Flanges " Mainly used on the headbox approach piping. General Note: a. Material : Stainless Steel 30L, 316L. b. Fabricated upon request in size '' and larger. c. side finish: 32 micro inch or electropolishing on request. d. Design can be different from illustration. Contact DI representative for actual design. 6-6 c.

74 Pipe Hangers Nominal Diameter C L R / / / C L R General Note: a. Material: Stainless Steel30L. b. Hardware not included. arwick c. 6-7