2 The Isle of Cold Server enclosures. outdoor enclosure

Size: px

Start display at page:

Download "2 The Isle of Cold Server enclosures. outdoor enclosure"

Bertram Newman
6 years ago
Views:

1 CATALOGUE

8 46 The Isle of Cold Server enclosures The Isle of Cold is a solution intended for server rooms which are equipped with precise air-conditioning.

2 HB2 outdoor enclosure HB2 based on the frame construction with mounted panel walls, made of aluminium sheet. The enclosure is an answer for market s needs connected with telecommunication industry and enclosures especially designed for substations The Isle of Cold Server enclosures The Isle of Cold is a solution intended for server rooms which are equipped with precise air-conditioning. Permanent separation of hot and cold zones due to the use of Isle of Cold ensures improvement of cooling conditions. AG INDUSTRIAL ENCLOSURES AG enclosures are made of steel sheet, equipped with full solid or glazed doors and a mounting plate. It is an ideal solution for industrial usage. Wide range of available dimensions provides to the easy selection of enclosures which are perfectly adjusted to the customer s needs

Table of contents: Outdoor ENCLOSURES HB2... 8 IPDSLAM... 10 FSC... 13 Z1... 14 SZM... 16 OSZS-2... 17 WZ-2... 18 INDUSTRIAL ENCLOSURES Hyperack System... 22 Hyperack For Power Stations... 23 AG.

3 Table of contents: Outdoor ENCLOSURES HB IPDSLAM FSC Z SZM OSZS WZ INDUSTRIAL ENCLOSURES Hyperack System Hyperack For Power Stations AG NETWORK DISTRIBUTION ENCLOSURES ST STW STU ST ABL Hyperack Server ENCLOSURES ABL Hyperack The Isle of Cold Accessories HYPERACK AG ABL HB Universal... 97

4 About the company 4

AGMAR S.A. is one of the leading Polish manufacturers of the metal enclosures systems. The company was established in 1983 and it employs about 200 people.

We possess the team of sales representatives and technical consultants around the country and we have a lot of foregin partners as well. Ag

We understand the quality not only as delivering the highest standard of workmanship products, but also as constant improvement, functionality and customers service.

Complete production line comprising all functions required to produce enclosures helps us to react fast for different needs of the customers and market s trends.

5 AGMAR S.A. is one of the leading Polish manufacturers of the metal enclosures systems. The company was established in 1983 and it employs about 200 people. Company headquarters and production line are located at Special Economic Zone in Mielec. We possess the team of sales representatives and technical consultants around the country and we have a lot of foregin partners as well. Agmar S.A. from the beginning of its existence has been taking pride in the tradition of innovative products and the highest construction quality. We understand the quality not only as delivering the highest standard of workmanship products, but also as constant improvement, functionality and customers service. The company has a modern machinery park, mainly based on AMADA, which is systematically modernized and extended with the additional specialized devices. Complete production line comprising all functions required to produce enclosures helps us to react fast for different needs of the customers and market s trends. Within the current product range, AGMAR S.A. offers its customers complex solutions of metal enclosures designed for telecommunication, power industry, IT and OEM s manufacturers. We are constantly implementing new information planning technology (ERP) and organizing solutions that support synchronous designing and effective exchange of technical documentation with customers. Thanks to this we were able to reduce the time, which is needed for working on a project in designing and manufacturing stage. Our R&D department stays in touch with customers at every stage of the executable project. It allows us to recognize all needs precisely and to suggest the best solution of all. Thanks to developing over the years many leading products and solutions, AGMAR S.A. sets new trends and becomes a pioneer in its own field of activity. This is confirmed by obtaining numerous certificates and many long-term contracts. 5

6 6

7 Outdoor Enclosures HB IPDSLAM...10 FSC...13 Z SZM...16 OSZS WZ

8 Outdoor Enclosures HB2 Configuration 1. Welded enclosure s frame 2. Rear double wall with thermal insulation 3. Side walls easily removable with thermal insulation 4. Roof for ventilation 5. Blinded top 6. Middle bottom s panel 7. Plinth 150 mm height with a possibility to adapt a fire screen bulkhead 8. Door limiter 9. Set of micro switches brackets Technical Data Material: Frame construction with assembled panel walls. Aluminum welded frame made by #2 mm thick sheet with mounting adapters made by hot galvanized steel sheet DC51D275. Aluminum side walls and the rear wall are made in double-wall construction with thermo insulation. Surface finishing: Powder-painted. Maximum protection rating: IP55, IK10. Colour: RAL7035. In the set there are various brackets for different types of marginal switches. H H1 Total width (W) mm Total height (H) mm Total depth (D) mm Usable width (W1) mm Usable height (H1) mm Usable depth (D1) mm Catalogue number CA CA CA CA CA CA CA CA CA CA CA CA CA CA W1 W D1 D 8

9 Solid door HB2 Double wall door with thermo insulation made of aluminium sheet. Possibility to hinge on right or left due to reversing the door and replacing a handle and the locking mechanism. Material: Aluminium sheet #1 mm. Colour: RAL7035. Scope of deliver: Full door with assembly kit. Width (mm) Height (mm) CC CC CC CC CC CC CC CC Ventilated door HB2 The double wall door made of aluminium sheet equipped with filters and air slots louvers. Possibility to hinge on right or left open by replacing side profiles from right to the left side. Material: Aluminium sheet #1 mm. Colour RAL7035. Scope of delivery: Ventilated door with assembly kit. Width (mm) Height (mm) CC CC CC CC CC CC CC CC

10 Outdoor Enclosures IPDSLAM Configuration 1. Enclosure double wall construction 2. Door air air heat exchanger with 60W/K cooling capacity 3. Roof 4. Plinth 5. Rack 19 /21 6. Heating system inside the enclosure 7. Fan speed and heating controller 8. Door switch contact 9. Door limiter Technical data Material: Enclosure made of aluminium #2 mm thick sheet. Aluminium solid door. Supporting chassis made of hot galvanized sheet #2 mm. Handle made of PA6, prepared for semi-cylinder lock insert. Surface finishing: The enclosure is powderpainted. Internal construction made of hot galvanized steel sheet. Protection rating: IP55, IK10. Colour: RAL7035. Scope of delivery: Enclosure in an assembled form, packed on the pallet. Total width (W) mm Total height (H) mm Total depth (D) mm Usable width (W1) mm Usable height (H1) U Usable depth (D1) mm Catalogue number EA EA H H1 W1 W D1 D 10

11 IPDSLAM Outdoor Enclosures Configuration 1. Enclosure double wall construction 2. Solid front door 3. Roof air - air heat exchanger with 60 W/K cooling capacity 4. Plinth 5. Rack 2x19 /21 6. Heating system inside the enclosure 7. Fan speed and heating controller 8. Door switch contact 9. Door limiter Technical data Material: Enclosure made of aluminium sheet #2 mm thick sheet. Aluminium solid door. Supporting chassis made of hot galvanized sheet #2 mm. Handle made of PA6, prepared for semicylinder lock insert. Surface finishing: The enclosure is powderpainted. Internal construction made of hot galvanized steel sheet. Protection rating: IP55, IK10. Colour: RAL Scope of delivery: Enclosure in an assembled form, packed on the pallet. Total width (W) mm Total height (H) mm Total depth (D) mm Usable width (W1) mm Usable height (H1) U Usable depth (D1) mm Catalogue number EA EA H1 H W1 W D1 D 11

12 Outdoor Enclosures IPDSLAM Configuration 1. Enclosure double wall construction 2. Side chamber MDF 3. Door air - air heat exchanger with 60 W/K cooling capacity 4. Roof 5. Plinth 6. Rack 19 /21 7. Heating system inside the enclosure 8. Fan speed and heating controller 9. Door switch contact 10. Door limiter Technical data Material: Enclosure made of aluminium #2 mm thick sheet. Aluminium solid door. Supporting chassis made of hot galvanized sheet #2 mm. Handle made of PA6, prepared for semi-cylinder lock insert. Surface finishing: The enclosure is powderpainted. Internal construction made of hot galvanized steel sheet. Protection rating: IP55, IK10. Colour: RAL7035. Scope of delivery: Enclosure in an assembled form, packed on the pallet. Total width (W) mm Total height (H) mm Total depth (D) mm Usable width (W1) mm Usable height (H1) U Usable depth (D1) mm Catalogue number EA EA H H1 W1 W D1 D 12

13 FSC Outdoor Enclosures Configuration 1. Enclosure corpus 2. Front cover 3. Mounting plate 4. Integrated base with adjustable height Technical data Material: Enclosure made of aluminium sheet #2 mm. Front aluminium cover, removable. Mounting plate made of steel hot galvanized sheet #2 mm. Handle made of PA6, prepared for semicylinder lock insert. Surface finishing: The enclosure is powderpainted. Internal construction made of hot galvanized steel sheet. Protection rating: IP31, IK10. Colour: RAL7035. Scope of delivery: Enclosure fully assembled, packed on the pallet. Total width (W) mm Total height (H) mm Total depth (D) mm Usable height (H1) mm Catalogue number EA EA W D H H1 13

14 Outdoor Enclosures Z1 Configuration 1. Enclosure double wall construction equipped with side walls with thermo insulation 2. Aluminium front and rear door with a lock 3. Pitched roof 4. Solid plinth 5. Front mounting plate 150 mm 6. Rear mounting plate 150 mm 7. Mounting plate 250 mm 8. Grounding bar (zinc plated steel) 9. Roof for technical supervision socket 10. Frame for mounting plates assembly and additional clamp strips 11. Door limiter and a pocket for documents 12. Mounting brackets for light mounting 13. Adapters for door switch contacts 14. Cable holders (20 pcs) 15. Mounting cross-bars (5 pcs) Technical data Material: Enclosure made of aluminium sheet #2 mm thick. Solid front aluminum door. Internal chassis made of steel sheet #2 mm. Mounting plates of hot galvanized steel sheet #1,5 mm. Enclosure has a formed lock. Surface finishing: Enclosure and mounting plates powder-painted. Internal construction made of hot galvanized steel sheet. Protection rating: IP55, IK10. Colour: RAL7035. Scope of delivery: Enclosure in an assembled form, packed on the pallet. W W1 D D1 Total width (W) mm Total height (H) mm Total depth (D) mm Usable width (W1) mm Usable height (H1) U Usable depth (D1) mm Catalogue number UZ H1 H 14

Concrete foundation Z1 The foundation consists of five concrete elements connected sideways by two screw-bolts. Its construction allows to insert cables out of four directions from the cable channel.

15 Concrete foundation Z1 The foundation consists of five concrete elements connected sideways by two screw-bolts. Its construction allows to insert cables out of four directions from the cable channel. From the top of the foundation there are four screw-bolts used for placing the enclosure on the ground (fire screen bulkhead). Material: Concrete Scope of delivery: Foundation with an assembly kit. For the enclosure s model Z1 UZ Fire-screen bulkhead Z1 Fire-screen bulkhead is used for separating the inside of the enclosure from the cable channel. After inserting the cables it is advised to fill in the fire-screen bulkhead with bituminous mass, which prevents against fire, harmful substances and rodents from getting inside the enclosure. Material: Aluminium powder-painted sheet #3 mm thick Colour: RAL7035. Scope of delivery: Fire-screen bulkhead with an assembly kit. For the enclosure s model Z1 UZ

16 Outdoor Enclosures SZM Configuration 1. Single wall enclosure 2. Solid aluminium door with 3-point lock 3. Flat roof 4. Floor with rubber cable glands with a possibility of fast disassembling 5. Mounting plate Technical data Material: Enclosure made of aluminum sheet of thickness #2 mm. Full aluminum door. Mounting plate made of steel sheet #2 mm. The type of handle depends on the enclosure s height. The enclosure is adapted to hanging on the wall due to holders. Surface finishing: Enclosure powder-painted. Internal construction made of hot galvanized steel sheet. Protection rating: IP55, IK10. Colour: RAL7035. Scope of delivery: Enclosure in an assembled form, packed on the pallet. H H1 D Total width (W) mm Total height (H) mm Total depth (D) mm Usable width (W1) mm Usable height (H1) U Usable depth (D1) mm Catalogue number UT UT UT UT S W1 43 D1 16

17 OSZ-2 Outdoor Enclosures Configuration 1. Poles-mounted box for reserve of max. 50 m of linear cable 2. Cable outputs located in the corners of the enclosure 3. Ventilated door with a lock Technical data Material: The box is made of the aluminum sheet #2 mm thickness. Solid aluminum door. Internal supporting chassis made of aluminum sheet #2 mm thick. The lock is chromium electroplated and nickel plated. Surface finishing: Powder-painted. Colour: RAL7035. Protection rating: IP20. Scope of delivery: Box in an assembled form, packed on the pallet. Total width (W) mm Total height (H) mm Total depth (D) mm UL W H D 17

18 Outdoor Enclosures WZ-2 Configuration 1. Inventory cable frame complete - intended to place 30 m on it of the OPGW cable (020) or 60 m of OPGW (012) 2. Protection that makes it impossible to move it sideways Technical data Material: Welded construction, #5 mm thickness steel sheet. Surface finishing: Hot galvanized. Scope of delivery: Packed on the pallet. Ring s diameter Depth (mm) UB , ,9 18

19 19

20 20

21 Industrial Enclosures HYPERACK HYPERACK FOR PS AG

22 Industrial Enclosures Hyperack Configuration 1. Welded Hyperack enclosure s frame 2. Solid steel door with 4-point locking system, equipped with a handle and a patent lock; opening angle 180 degrees 3. Screw-fastened rear wall 4. Solid flat roof 5. Sectional, solid metal sheet bottom panel 6. Mounting plate Technical data Material: Enclosure made of steel sheet #1,5 mm. Solid front door made of steel sheet #1,5 mm. Screw-fastened rear wall of steel sheet #1,5 mm. Mounting plate made of steel hot galvanized sheet #2 mm. Lock insert zinc-plated. Surface finishing: Enclosure s frame and outside construction are powder-painted. Internal construction is made of hot galvanized steel sheet. Protection rating: IP20, max to achive IP55, IK10 Colour: RAL7035. Scope of delivery: Enclosure in an assembled form, packed on the pallet. H S W1 H1 D Width (W) mm Height (H) mm Depth (D) mm Usable width (W1) mm Usable height (H1) U Catalogue number NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NOTE: Enclosures of width 1000mm and more can be equipped with vertically divided door. Enclosures with catalogue numbers: NG and NG are also offered with vertically divided door. 22

23 Hyperack Industrial Enclosures Configuration 1. Welded Hyperack enclosure s frame 2. Front glazed door model E with 4-point locking system with handle and a patent lock; opening angle is 180 degrees 3. Solid rear door with 4-point locking system equipped with handle and a patent lock; opening angle is 180 degrees 4. Solid screw-fastened side walls 5. High, side-perforated roof 6. Sectional metal bottom panel with brush strip 7. Perforated front and rear element of the plinth, side elements solid 8. Leveling feet for the plinth swing frame 10. Construction horizontal bar type 508 (2 sets) 11. Vertical grounding bar 450 mm 12. Cable clamp bracket 14. Mounting plate for the whole height of the enclosure Technical data Material: Enclosure made of steel sheet #1,5 mm. front glazed door of toughened transparent glass #4 mm. Rear solid steel door. Mounting plate of hot galvanized steel sheet #2 mm. Lock insert zinc-plated. Surface finishing: Enclosure s frame and outside construction are powder-painted. Internal construction is made of hot galvanized steel sheet. Maximum protection rating: IP55, IK10. Colour: RAL7035. Scope of delivery: Enclosure in an assembled form, packed on the pallet. # An exemplary photo of the enclosure with the equipment. In sale enclosure without equipment. Width (S) mm Height (W) mm Depth (G) mm Usable height (S1) mm Usable height frame (W2) U Usable depth (G1) mm Catalogue number U 535 NG18061W U 735 NG18081W U 535 NG18261W U 735 NG18281W NOTE: Swing frame is available in Accessories section. D1 W2 W W D W 23

24 Industrial Enclosuress Hyperack # An exemplary photo of the enclosure with the equipment. In sale enclosure without equipment. Configuration 1. Welded Hyperack enclosures frame 2. Front glazed door model E with 4-point locking, equipped with handle and a patent lock; opening angle 180 degrees 3. Solid rear door with 4-point locking system, equipped with handle and a patent lock; opening angle 180 degrees 4. Solid screw-fastened side walls 5. High, side-perforated roof 6. Sectional metal sheet bottom panel with a brush strip 7. Perforated front and rear element of the plinth, side elements are solid 8. Leveling feet for the plinth 9. Construction horizontal bar type 508 (2 sets) 10. Vertical grounding bar 450 mm 11. Cable clamp bracket Technical data: Material: Enclosure of steel sheet #1,5 mm. front glazed door of toughened plain glass #4 mm. Rear solid steel door. Mounting plate made of hot galvanized steel sheet #2 mm. Handle made of with PA6. Lock s insert zinc-plated. Surface finishing: Enclosure s frame and outside construction are powder-painted. Inside construction is made of hot galvanized steel sheet. Maximum protection rating: IP55, IK10. Colour: RAL7035. Scope of delivery: Enclosure in an assembled form, packed on the pallet. Width (S) mm Height (W) mm Depth (G) mm Usable height (W1) mm Usable depth (G1) mm Catalogue number NG28060W NG28080W NG28260W NG28280W D1 H1 H W D W 24

25 Hyperack Industrial Enclosuress Configuration 1. Welded Hyperack enclosure s frame 2. Solid fornt door made of steel sheet, 4-point locking system, equipped with handle and a patent lock; opening angle 180 degrees 3. Full steel rear door with 4-point locking equipped with handle and a patent lock; opening angle is 180 degrees 4. High, side-perforated roof 5. Sectional, solid metal bottom panel 6. Perforated front and rear element of the plinth, side elements are solid 7. Leveling feet for the plinth 8. Construction horizontal bar type 511 (2 sets) 9. Vertical grounding bar 450 mm 10. Cable clamp bracket Technical data Material: Enclosure of steel sheet #1,5 mm. Solid front door made of steel sheet #1,5 mm. Handle made of PA6. Lock s insert zinck-plated Surface finishing: Enclosure s frame and outside construction are powder-painted. Internal construction is made of hot galvanized steel sheet. Maximum protection rating: IP55, IK10. Colour: RAL7035. Scope of delivery: Enclosure in an assembled form, packed on the pallet. Width (S) mm Height (W) mm Depth (G) mm Usable height (W1) mm Usable depth (G1) mm Catalogue number NG38060W NG38080W NG38260W NG38280W H1 H W D D1 W 25

26 Industrial Enclosuress AG Configuration 1. Enclosure corpus 2. Solid steel door 3. Panel bottom cover for cable inlets 4. Mounting plate 5. Locks with the set of keys Technical data Material: Enclosure made of steel sheet from #1 mm to #2 mm, depends on the enclosure s dimensions. Internal chassis made of the hot galvanized steel sheet #2 mm. Mounting plate made of hot galvanized sheet #2 mm. The lock is nickel, chromium plated and powder-painted RAL9005. Surface finishing: The enclosure is powderpainted. Internal construction is made of hot galvanized steel sheet. Protection rating: IP54, IK10. Colour: RAL7035. Scope of delivery: Enclosure in an assembled form, packed on the pallet. H D W H1 D1 Width (W) mm Height (H) mm Depth (D) mm Usable width (W1) mm Usable height (H1) mm Usable depth (D1) mm Catalogue number DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA DA

27 27

28 28

NETWORK DISTRIBUTION ENCLOSURES ST... 30 STW... 31 STU.

29 NETWORK DISTRIBUTION ENCLOSURES ST STW STU ST ABL HYPERACK

30 NETWORK DISTRIBUTION ENCLOSURE ST Configuration 1. Enclosure corpus 2. Glazed door with a lock 3. Front 19 rack Technical date Material: Steel welded enclosure, made of metal sheet #1 mm. Glazed door made of toughened, transparent glass #4 mm. The lock is chromium, electro and nickel plated. Surface finishing: The enclosure is powder-painted. Protection rating: IP20, IK10. Colour: RAL7035, RAL9005. Scope of delivery: The enclosure in an assembled form and packed. H1 Usable Width Height Depth height (S) mm (W) mm (G) mm (W1) U RAL7035 RAL NW NW NW NW NW NW NW NW W H D 30

31 STW NETWORK DISTRIBUTION ENCLOSURE Configuration 1. Enclosure corpus, roof and floor 2. Steel door with a lock 3. Rear wall 4. Sliding side walls 5. Front 19 rack Technical data Material: The enclosure made of steel sheet #1 mm. Solid steel door #1 mm thick. The internal rack is made of steel hot galvanized sheet # 2mm, transparent glass. The lock is chromium electro and nickel plated. Surface finishing: The enclosure is powder-painted. Internal construction is made of hot galvanized steel sheet. Protection rating: IP20, IK10. Colour: RAL7035, RAL9005. Scope of delivery: The enclosure in an assembled form and packed. Width (S) mm Height (W) mm Depth (G) mm Usable height (W1) U RAL7035 RAL NW NW NW NW NW NW NW NW NW NW NW NW H H1 W D 31

32 NETWORK DISTRIBUTION ENCLOSURE STW Configuration 1. Enclosure corpus, roof and floor 2. Glazed door with a lock 4. Rear wall 3. Sliding side walls 5. Front 19 rack Technical data Material: The enclosure made of steel sheet #1 mm. Glazed door made of toughened, transparent glass #4 mm. The internal rack is made of steel hot galvanized sheet #2 mm. The lock is chromium electro and nickel plated. Surface finishing: The enclosure is powder-painted. Internal construction made of hot galvanized steel sheet. Protection rating: IP20, IK10. Colour: RAL7035, RAL9005. Scope of delivery: The enclosure in an assembled form and packed. W Width (S) mm Height (W) mm Depth (G) mm Usable height (W1) U RAL7035 RAL NW NW NW NW NW NW H H NW NW NW NW NW NW D 32

33 STU NETWORK DISTRIBUTION ENCLOSURE Configuration 1. Enclosure corpus, roof and floor 2. Steel door with a lock 3. Swing rear panel module acquitted by button 4. Side walls 5. Front 19 rack Technical data Material: The enclosure made of steel sheet #1 mm. Solid steel door #1 mm. The internal rack is made of steel hot galvanized sheet # 2mm. The lock is chromium electro and nickel plated. Surface finishing: The enclosure is powder-painted. Internal construction made of hot galvanized steel sheet. Protection rating: IP20, IK10. Colour: RAL7035, RAL9005. Scope of delivery: The enclosure in an assembled form and packed. Width (W) mm Height (H) mm Depth (D) mm Usable height (H1) U RAL7035 RAL NW NW NW NW NW NW NW NW H H1 W D 33

34 NETWORK DISTRIBUTION ENCLOSURE STU Configuration 1. Enclosure corpus, roof and floor 2. Glazed door with a lock 3. Swing rear panel module acquitted by button 4. Side walls 5. Front 19 rack Technical data Material: The enclosure made of steel sheet #1 mm. Glazed door made of toughened, transparent glass #4 mm. The internal rack is made of steel hot galvanized sheet #2 mm. The lock is chromium electro and nickel plated. Surface finishing: The enclosure is powder-painted. Internal construction is made of hot galvanized steel sheet. Protection rating: IP20, IK10. Colour: RAL7035, RAL9005. Scope of delivery: The enclosure in an assembled form and packed. H H1 W Width (W) mm Height (H) mm Depth (D) mm Usable height (H1) U RAL7035 RAL NW NW NW NW NW NW NW NW D 34

35 ST1 NETWORK DISTRIBUTION ENCLOSURE Configuration 1. Welded 19 frame 2. Base allows to adjust the depth of the frame, with 50 mm graduation 3. Leveling feet Technical data Material: The construction made of steel sheet #2 mm. Surface finishing: Powder-painted. Colour: RAL7035, RAL9005. Scope of delivery: Rack in an assembled form, packed on the pallet. Width (W) mm Height (H) mm Depth (D) mm Usable height (H1) U RAL7035 RAL NK NK NK NK NK NK W D H H1 35

NETWORK DISTRIBUTION ENCLOSURE ST1 Configuration 1. Two welded frames 19 2. Rack base 3. Outriggers between rack frames. 4.

36 NETWORK DISTRIBUTION ENCLOSURE ST1 Configuration 1. Two welded frames Rack base 3. Outriggers between rack frames. 4. Leveling feet Technical data Material: The construction of steel sheet #2 mm. Surface finishing: Powder-painted. Colour: RAL7035, RAL9005. Scope of delivery: Rack in an assembled form, packed on the pallet. W D Width (W) mm Height (H) mm Depth (D) mm Usable height (H1) U RAL7035 RAL NK NK NK NK NK NK H H1 36

37 ABL NETWORK DISTRIBUTION ENCLOSURE Configuration 1. Steel screwed frame 2. Front glazed door with a locking system*, equipped with semi-cylinder lock 3. Steel screw-fastened rear wall with a blinded hole for brush strip panel 4. Solid screw-fastened side walls 5. Top panel prepared for 6 fans with cable brush-strip 6. Leveling feet 7. Front and rear profiles 19 type L 8. Copper grounding rail with complete set of cables * The door are single-point with a system of neodymium magnets. Technical data Material: Material: Enclosure made of steel sheet #1,5 mm. Glazed door of toughened, transparent glass #4 mm. Internal rack made of hot galvanized steel #2 mm. Steel bars #1,5 mm powder-painted. Handle made of PA6, prepared for semi-cylinder lock s insert. Surface finishing: Enclosure s frame and outside construction are powder-painted. Inside construction is made of hot galvanized steel. Steel is powder-painted. Protection rating: IP20, IK10. Colour: RAL7035. Scope of delivery: Enclosure is in an assembled form, packed on the pallet. Width (W) mm Height (H) mm Depth (D) mm Usable height (H1) U Usable depth (D1) mm Catalogue number BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA H W H1 D 19 G1 37

38 NETWORK DISTRIBUTION ENCLOSURE ABL Configuration 1. Steel screwed frame. 2. Front steel door with a locking system*, equipped with semi-cylinder lock, the opening angle is 135 degrees. 3. Steel screw-fastened rear wall with a blinded hole for brush strip panel 4. Solid screw-fastened side walls 5. Top panel prepared for 6 fans with cable brush strip 6. Leveling feet 7. Front and rear profiles 19 type L 8. Copper grounding rail 250 mm with complete set of cables. * Single-point a locking system with neodymium magnets. Technical data Material: Enclosure construction made of steel sheet #1,5 mm. Front steel door made of #1,5 mm thick steel sheet. Internal rack made of hot galvanized steel #2 mm. Cross-bars made by #1,5 mm thick steel and powder-coated. Handle made of PA6, prepared for semi-cylinder lock s insert. Surface finishing: Enclosure s frame and outside construction are powder painted. Internal construction is made of hot galvanized steel powder painted. Protection rating: IP20, IK10. Colour: RAL7035. Scope of delivery: Enclosure in an assembled form, packed on the pallet. H W H1 D Width (W) mm Height (H) mm Depth (D) mm Usable height (H1) U Usable depth (D1) mm Catalogue number BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA G1 38

39 ABL NETWORK DISTRIBUTION ENCLOSURE Configuration 1. Steel screwed frame 2. Front glazed door with a locking system, equipped with semi-cylinder lock, opening angle 135 degrees 3. Rear steel solid door equipped with semi-cylinder lock, opening angle 135 degrees. 4. Solid screw-fastened side walls. 5. Top panel prepared for 6 fans with cable brush strip 6. Leveling feet 7. Front and rear profiles 19 type L 8. Grounding copper rail 250 mm with complete set of cables * Single-point locking system with neodymium magnets. Technical data Material: Enclosure construction made of steel sheet #1,5 mm. Front glazed door of toughened, transparent, #4 mm glass, Internal rack made of hot galvanized steel sheet #2 mm. Cross-bars made by #1,5 mm thick steel and powdercoated. Handle made of PA6, prepared for semicylinder lock s insert. Surface finishing: Enclosure s frame and outside construction are powder-painted. Internal construction is made of hot galvanized steel. Steel powder-painted. Protection rating: IP20, IK10. Colour: RAL7035, RAL9005. Scope of delivery: Enclosure in an assembled form, packed on the pallet. Width (W) mm Height (H) mm Depth (D) mm Usable height (H1) U Usable depth (D1) mm RAL7035 RAL BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA BA H W H1 D 19 G1 39

40 NETWORK DISTRIBUTION ENCLOSURE HYPERACK Configuration 1. Hyperack enclosures welded frame 2. Front glazed door model B with 4-point locking system, equipped with semi-cylinder lock; opening angle 180 degrees 3. Solid rear door with 4-point locking system, equipped with semi-cylinder lock; opening angle 180 degrees 4. Perforated side walls with pin tumbler locks 5. High, side-perforated roof 6. Sectional, bottom panel with a brush strip 7. Leveling feet 8. Front and rear profiles 19 type B 9. Grounding copper rail 450 mm with complete set of cables. Technical data Material: Enclosure construction made of steel sheet #1,5 mm. Front glazed door of toughened transparent # 4 mm glass. Internal rack made of hot galvanized steel sheet #2 mm. Crossbars made by #1,5 mm thick steel and powdercoated. Handle made of PA6, prepared for semicylinder lock s insert. Surface finishing: Enclosure s frame and outside construction are powder-painted. Inside construction is made of hot galvanized steel sheet. Protection rating: IP20, IK10. Colour: RAL7035, RAL9005. Scope of delivery: Enclosure in an assembled form, packed on the pallet. H W H1 D Total width (W) mm Total height (H) mm Total depth (D) mm Usable height (H1) U Usable depth (D1) mm RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG W 40

41 41

42 42

43 Server ENCLOSURES ABL HYPERACK The isle of cold

44 Server enclosures ABL Configuration 1. Steel screwed frame 2. Front perforated door with a locking system*, equipped with semi-cylinder lock, door s opening angle is 135 degrees 3. Rear door perforated 4. Solid screw-fastened side walls 5. Top panel prepared for 6 fans with cable brush strip 6. Leveling feet 7. Front and rear profiles 19 type L 8. Grounding copper bar with complete set of cables. * Single-point locking system with neodymium magnets. Technical data Material: Enclosure made of steel sheet #1,5 mm. Front perforated steel door #1,5 mm; 80% perforated space on door construction. Internal rack of hot galvanized steel #2 mm. Handle made of PA6, prepared for semi-cylinder lock s insert. Surface finishing: Enclosure s frame and outside construction are powder-painted. Inside construction is made of hot galvanized steel. Protection rating: IP20, IK10. Colour: RAL7035, RAL9005. Scope of delivery: Enclosure in an assembled form, packed on the pallet. W D Width (W) mm Height (H) mm Depth (D) mm Usable height (H1) U RAL7035 RAL BA BA BA BA BA BA BA BA BA BA BA BA H H1 G1 44

45 HYPERACK Server enclosures Configuration 1. Welded Hyperack enclosure s frame 2. Front door perforated, equipped with semi-cylinder lock; opening angle 180 degrees 3. Rear door perforated, equipped with semi-cylinder lock; opening angle 180 degrees 4. Solid screwed side walls 5. Solid flat roof 6. Front and rear profiles L-type 6. Two sets of outriggers for 19 rack. 7. Grounding copper rail 250 mm with complete set of cables. Technical data Material: Enclosure made of steel sheet #1,5 mm. Doors are made of steel sheet #1,5 mm. Perforation 80% Internal rack made of hot galvanized steel sheet #2 mm. Handle made of PA6, prepared for semi-cylinder lock s insert. Surface finishing: Enclosure s frame and outside construction are powder-painted. Inside construction is made of hot galvanized steel sheet. Protection rating: IP20, IK10. Colour: RAL7035, RAL9005. Scope of delivery: Enclosure in an assembled form, packed on the pallet. Usable Total width Total height Total depth height (W) mm (H) mm (D) mm (H1) U RAL7035 RAL U NG NG U NG NG U NG NG U NG NG U NG NG U NG NG U NG NG U NG NG W D H H1 45

Server enclosures The isle of cold Configuration Growing productivity of servers contributes to the increase of heat dissipation in server rooms.

The most frequent problem is called hot spots which are the areas of higher temperature, located near the IT equipment with a lot of devices (for example blade type servers).

This solution limits uncontrollable mixture of hot air, that comes from IT devices with cold air which comes from the air-conditioners.

46 Server enclosures The isle of cold Configuration Growing productivity of servers contributes to the increase of heat dissipation in server rooms. Using conventional precise air-conditioning is in some cases insufficient or uneconomical. The most frequent problem is called hot spots which are the areas of higher temperature, located near the IT equipment with a lot of devices (for example blade type servers). The improvement of cooling conditions is achieved by separation of cool and hot areas. This solution limits uncontrollable mixture of hot air, that comes from IT devices with cold air which comes from the air-conditioners. We achieve further increase of effectiveness by limiting cubature of cold zones. It means housingup the corridor in The Isle of Cold. This kind of solution improves the effectiveness of air conditioning and reduces the costs of server room s maintenance. In the corridor of cold we used cold air is emitted by air conditioners, which are placed under the technological floor or conditioners located between enclosures fitted in the corridor system. We offer standard solutions of the Isle of Cold in various dimensions, in order to meet with customers needs. Configuration of corridor result from the height of the isle and width. The height of the housing development is available as Low (the corridor s height is equal to enclosure s height) and as High (the corridor s height is higher 240 mm than enclosure s height). The corridor s width is accessible in two alternative designs: 1000 mm or 1200 mm. There is also a possibility of designing non typical enclosures of the Isle of Cold. Special solutions are offered individually. 46

47 HYPERACK Server enclosures Configuration 1. Hyperack enclosure s welded frame 2. Front door perforated with a locking mechanism, equipped with a handle and a patent lock; opening angle 180 degrees 3. Rear door vertically divided and perforated with a locking mechanism, equipped with a handle and a patent lock, the opening angle 180 degrees. 4. Solid flat roof with a brush strip 5. Rear and front profiles L type 6. Three sets of rack s outriggers Grounding copper bar 250 mm with complete set of cables Technical data Material: Enclosure construction made of steel sheet #1,5 mm. Front perforated door made of #1,5 mm steel sheet. Perforation 80%. Internal rack made of hot galvanized steel sheet #2mm. Handle made of PA6. Lock s insert zinc-plated. Surface finishing: Enclosure frame and outside construction are powder-painted. Internal construction is made of hot galvanized steel sheet. Protection rating IP20, IK10. Colour: RAL7035, RAL9005. Scope of delivery: Enclosure in an assembled form, packed on the pallet. Usable Total width Total height Total depth height (S) mm (W) mm (G) mm (W1) U RAL7035 RAL U NG NG U NG NG U NG NG U NG NG U NG NG U NG NG U NG NG U NG NG W D H H1 47

48 Server enclosures Door module Characteristic Front door for the Isle of Cold was designed as a sliding glazed door. This solution guarantees space saving and possibility of controlling devices from the outside. Standard solution of sliding door was suited for 42U and 47U enclosures (with or without the plinth), corridor width 1000 mm or 1200 mm. Technical data Material: Doors made of #1,5 mm sheet metal. Glazed door made of #4 mm toughened, transparent glass; Aluminium open profile. Surface finishing: The construction are powder painted. Colour: RAL7035, RAL9005. Scope of delivery: Packed flat. S1 G1 W1 Corridor width (S1) mm Enclosure depth (G1)mm Enclosure height (W1) mm RAL7035 RAL NG NG * NG NG NG NG * NG NG NG NG * NG NG NG NG * NG NG NG NG * NG NG NG NG * NG NG NG NG * NG NG NG NG * NG NG * Enclosure placed on the plinth. 48

49 Roof module Server enclosures Characteristic Roof module of the Isle of Cold was made as a metal frame with polycarbonate windows. The windows are mounted using magnets. In the middle of the roof construction there is a tray with rubber ductings. Thus, there is a possibility to insert additional installations inside the enclosure such as: environmental monitoring system, system of smoke detecting and many others. The window which is mounted by magnets allows easy access to the enclosure s roof or to the mounted cable trays. Polycarbonate filling guarantees better light transmittance, stability, construction lightness and the safety of using. We offer roof modules for enclosures of 300 mm, 600 mm and 800 mm wide in options: Corridor width 1000 mm or 1200 mm, Housing height 50 mm or 240 mm. Technical data Material: Roof modules made of #10 mm polycarbonate transparent windows housed in #1,5 mm steel sheet construction. Aluminium profile. Surface finishing: The construction is powder-painted. Colour: RAL7035, RAL9005. Scope of delivery: Packed flat. Element Flat Roof Module High Roof Module Enclosure width (S2) mm Corridor width (S1) mm RAL7035 RAL NG11030N NG21030N NG11230N NG21230N NG11060N NG21060N NG11260N NG21260N NG11080N NG21080N NG11280N NG21280N NG11030W NG21030W NG11230W NG21230W NG11060W NG21060W NG11260W NG21260W NG11080W NG21080W NG11280W NG21280W S2 S1 49

50 50

Accessories HYPERACK... 52 AG... 79 ABL.

51 Accessories HYPERACK AG ABL HB UniVersal

hyperack Enclosure s Frame HYPERACK enclosure s frame is a base for the configuration of IT, power industry, server enclosures and for industrial automation equipment and machines.

Vertical profiles have got alternately located round and rectangular holes, which are used to install various devices and equipment: cable management panels, cable eyes, power-supply strips,

52 hyperack Enclosure s Frame HYPERACK enclosure s frame is a base for the configuration of IT, power industry, server enclosures and for industrial automation equipment and machines. The frame s construction is vertically symmetrical, surfaces may be used interchangeably. Frame s profiles are perforated. Vertical profiles have got alternately located round and rectangular holes, which are used to install various devices and equipment: cable management panels, cable eyes, power-supply strips, controlling and measuring apparatus and others. The holes of the same type are located in every 25 mm. The frame is welded, maximum allowed statical load capacity 1200 kg. It is confirmed by series of independent tests that were conducted by the external certificating unit. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Additional information: Hyperack enclosure s frame design is a registered industrial patent property of Agmar S.A. For the unique enclosure configuration, there is need to select appropriate doors, wall sides, roof, floor and internal equipment. Corner welded frame. Total width (S) mm Total height (W) mm Total depth (G) mm Maximum height of the rack (U) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG

53 Solid single door hyperack Solid steel door, used as front or rear, hinged on the right, protected to the level up to IP55. Notice: in case of mounting door as left the appropriate type of hinges (left-side) are required. Material: Steel sheet #1,5mm. Colour: RAL 7035 or RAL Scope of delivery: Door with a handle and a patent lock, a complete set of hinges and an assembly kit. For frames Width (mm) Height (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG Solid door vertically divided hyperack Solid steel door divided vertically are used as front or rear door. Protection IP55. Material: Steel sheet #1,5 mm Colour: RAL7035 Scope of delivery: Door with a handle and a patent lock, a complete set of hinges and an assembly kit. For frames Width (mm) Height (mm) NG NG NG NG NG NG NG NG

54 hyperack Glazed door - Model A Steel door with an supervisor window at the whole height. Used as front or rear door. Mounted as left or right. Material: Steel sheet #1,5 mm, toughened glass #4 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Door with a handle and a patent lock, a complete set of hinges and an assembly kit. Additional information: Protection ranting is IP20. Single door with 4-point locking system. In order to change the side of opening the other set of hinges should be ordered. For frames Width (mm) Height (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG hyperack glazed door - Model B Steel door with an supervisor window at the whole height, used as front rear. Mounted as right. Material: Steel sheet #1,5 mm, toughened glass #4 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Door with a handle and a patent lock, a complete set of hinges and an assembly kit. Additional information: Protection ranting is IP20. Single door with 4-point locking system. In order to change the side of opening the other set of hinges should be ordered. For frames Width (mm) Height (mm) RAL7035 RAL NG NG NG NG NG NG NG NG

55 Full IP55 glazed door - Model E hyperack Full IP55 glazed door with a glass filling of picture shape. Used as front or rear door. Mounted as left or right door. Protection rate IP55. Material: Steel sheet #1,5 mm, Toughened transparent glass #4 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Door with a handle and a patent lock, a complete set of hinges and an assembly kit. Additional information: Protection rate IP55. Single door with 4-point locking system. In order to change the side of opening the other set of hinges should be ordered (left or right). For frames Width (mm) Height (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG Glazed door vertically divided - Model E hyperack Solid glazed door divided vertically may be used as front or rear door, mounted as right. Protection rate IP55. Material: Steel sheet #1,5 mm, Toughened transparent glass #4 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Door with a handle, and a patent lock, a complete set of hinges and an assembly kit. Additional information: Protection rate IP55. Double door with 3-point locking system. For frames Width (mm) Height (mm) NG NG

56 hyperack Perforated door Perforated steel door with perforation of honeycomb shape. There is 80% of clearance. Used as front or rear door. Mounted as left or right. They are available in a single option. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Door with a handle and a patent lock, a complete set of hinges and an assembly kit. Additional information: The range of protection is IP20. Inside frame, which stables the door, has special technical holes that allow to install additional elements. For frames Width (mm) Height (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG hyperack Perforated door vertically divided Perforated steel door with perforation of honeycomb shape. There is of 80% of clearance. Used as front or rear door. Mounted as left or right. Scope of delivery: Door with a handle and a patent lock, a complete set of hinges and an assembly kit. Additional information: Protection rate, IP20. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. For frames Width (mm) Height (mm) RAL7035 RAL NG NG NG NG NG NG NG NG hyperack Door limiter Door limiter gently stops the door construction in order to prevent it from hitting. It holds them in the open position. The maximum opening angle is 180 degrees. Scope of delivery: Set consists of 1 pcs and an assembly kit. Package 1 pcs NG

57 set of hinges hyperack The set of hinges for doors mounted left or right hand. Scope of delivery: In the package there are 4 pcs Configuration Left-hand Right-hand NG NG Screw-fastened side walls hyperack Screw-fastened solid side walls, mounted to any available Hyperack frame or with bars used for building a modular system. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: There are 2 screwfastened side walls. To achieve IP55 the sealing and an assembly system need to be added. Additional information: Protection range, max IP55. For the configuration of modular system side walls, need to be used door/ side walls outriggers solution. For frames Width (mm) Height (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG

58 hyperack Screw-fastened rear wall Screw-fastened steel, solid rear wall, mounted to Hyperack frame or together with rails used for modular system of housing. Material: Steel sheet #1,5 mm. Colour: RAL7035. Scope of delivery: Set of 1 pcs of screwfastened rear wall with assembly kit. Additional information: Protection range, max IP55. For the configuration of modular system, doors/side walls need to be used with outriggers solution. For frames Width (mm) Height (mm) NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG hyperack Screw-fastened wall with brush strip Screw-fastened steel, solid wall, mounted to any plane of Hyperack frame or together with rails used for modular system of housing. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Set of 1 pcs of screwfastened side wall with assembly kit. Additional information: Protection range, max IP55. For the configuration of modular system, doors/side walls need to be used with outriggers solution. Wall s dimensions Width (mm) Height (mm) RAL7035 RAL NG NG NG NG

59 Attachable side walls with a pin tumbler lock hyperack Attachable side walls in a solid option, locking with four pin tumbler locks. The range of protection is IP20. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Set of 2 pcs of attachable side walls, pin tumbler locks with assembly kit. For frames Depth (mm) Height (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG Attachable side walls with a pin tumbler lock hyperack Attachable side walls in a perforated option, closed with four pin tumbler locks. The range of protection is IP20. Material: Steel sheet #1,5 mm. Colour: RAL7035 lub RAL9005. Scope of delivery: Set of 2 pcs of attachable side walls, pin tumbler locks with assembly kit. For frames Depth (mm) Height (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG

60 hyperack Solid top panel Solid screw-fastened steel top panel that allows enclosure s configuration to the ranage of protection IP55. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Set of 1 pcs of solid metal sheet top panel with assembly kit. For enclosures Width frame (mm) Depth frame (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG hyperack Solid top panel with a brush strip Solid screw-fastened steel top panel with a brush strip that allows enclosure s configuration to the ranage of protection IP20. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Set of 1 pcs of solid metal sheet top panel with assembly kit. For enclosures Width frame (mm) Depth frame (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG hyperack Flat top panel with filter MAT Screw-fastened steel top panel with perforation and filter mat. Filter prevents the dust from getting inside the enclosure. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Set of 1 pcs of solid metal sheet top panel with assembly kit. For enclosures Width frame (mm) Depth frame (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG

61 High, side-perforated top panel hyperack The roof of 70 mm height with side-perforation is intended for using in enclosures with convection and gravity forced ventilation. It can be used separately, with a fan tray or with flat steel top panel with filter mat. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Set of 1 pcs high roof with side-perforation and with assembly kit. For enclosures Width frame (mm) Depth frame (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG High, side-perforated top panel with a brush strip panel hyperack The roof of 70 mm height with a sideperforation is intended for using in enclosures with forced convection and gravity ventilation. There is a brush panel for inserting the wiring system. It can be used separately or in a set with a fan tray. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Set of 1 pcs high roof with side-perforation and with assembly kit. For enclosures Width frame (mm) Depth frame (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG Top panel spacings hyperack Top panel spacings used for raising up the flat roof. Scope of delivery: 4 spacing screw-bolts together with linings. Height (mm) 30 NG NG

62 hyperack Fan PANEL Fan panel is used to mount fans inside the Hyperack enclosure without occupying the space on the rack 19. Standard fan tray has a thermostat, 2 fans and a power supply cable. The panel can be equipped with additional fans. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Fan tray, a thermostat, 2 fans, power supply cable with an assembly system. Additional information: Fan tray may be used separately as a top panel or be available in a set with high side-perforated top panel. For enclosures Maximum Maximum power Width frame Depth frame quantity of fans of fans RAL7035 RAL9005 (mm) (mm) W NG NG W NG NG W NG NG W NG NG W NG NG W NG NG W NG NG W NG NG hyperack Fan PANEL with a brush strip Fan panel with a brush strip is used to mount fans inside the Hyperack enclosure without occupying the space on the rack 19. Standard fan tray has a thermostat, 2 fans and a power supply cable. The panel can be equipped with additional fans Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Fan tray a thermostat, 2 fans, power supply cable with an assembly system. Additional information: Fan tray may be used separately as a top panel or be available in a set with high side-perforated top panel. For enclosures Maximum Maximum power Width frame Depth frame quantity of fans of fans RAL7035 RAL9005 (mm) (mm) W NG NG W NG NG W NG NG W NG NG W NG NG W NG NG W NG NG W NG NG

63 Solid sectional bottom panel hyperack Sectional, solid metal sheet bottom panel with an option to replace particular elements with perforated sheet or a brush strip panel. Bottom panel with solid metal sheet has IP55 sealing. Material: Hot galvanized steel sheet. Scope of delivery: Sectional bottom panel with an assembly kit. Additional information: There is a possibility of optional bottom panels configuration and replaceable sheet panels mounting. There are solid panels, with a brush strip panel or with rubber ductings. For enclosures Width frame (mm) Depth frame (mm) The amount of panels NG NG NG NG NG NG NG NG NG NG NG NG NG NG x2 NG x3 NG x3 NG

64 hyperack Exchangeable sectional bottom plate Metal sheet with brush strip panel, perforation or rubber strip panel is used as optional element for the sectional bottom plate. Material: Hot galvanized steel sheet. Scope of delivery: Metal sheet for the sectional bottom plate with an assembly kit. Additional information: Typ 1 MC16: 15 x mm, 1 x mm; 16 electric wiring in total, degree of protection IP54; Typ 2 MC25: 1 x mm, 4 x mm, 12 x mm, 4 x 8-12 mm, 4 x 5-7 mm; 25 electric wiring in total, degree of protection IP65; Typ 3 MC35: 1 x mm, 2 x mm, 16 x mm, 14 x 8-12 mm, 2 x 6-10 mm; 35 electric wiring in total, degree of protection * Samples of: Strip panel For enclosures Rubber strip Rubber strip Rubber strip width (mm) Strip panel Perforated panel type 1 panel type 2 panel type NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG hyperack Front and Rear elements of the plinth Base for the enclosures. There is an option with the solid steel sheet. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Plinth s corners (4 pcs) and front covers (2 pcs) with an assembly kit. In order to build the whole plinth it is required to use side elements of the plinth additionally. For enclosure Width (mm) Height (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG NG NG

65 Perforated front and Rear elements of the plinth hyperack Base for the enclosures, version with side perforated steel sheet. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Set of Plinth s corners (4 pcs) and front covers (2 pcs) with an assembly kit. In order to build the whole plinth it is required to use side elements of the plinth. For enclosure Width (mm) Height (mm) RAL7035 RAL NG NG NG NG Front and Rear elements of the plinth with the brush strip panel hyperack Base for the enclosures, version with the brush strip panel. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Set of plinth s corners (4 pcs) and front covers (2 pcs) with an assembly kit. In order to build the whole plinth it is required to use side elements of the plinth. For enclosure Width (mm) Height (mm) RAL7035 RAL NG NG NG NG Plinth side panels hyperack Plinth side panels as the side filling of plinth. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: set of side covers (2pcs) with an assembly kit. Notice: in order to complete the whole plinth the front and rear element of the plinth must be selected. For enclosure Depth (mm) Height (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG

66 hyperack Perforated plinth side panels Plinth side panels as the side filling of plinth. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Set of covers (2pcs) with an assembly kit. Notice: in order to complete the whole plinth the front and rear element of the plinth must be selected. For enclosure Depth (mm) RAL7035 RAL NG NG NG NG NG NG hyperack Plinth side panels with a brush strip panel Plinth side panels as the side filling of plinth. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Set of covers (2pcs) with an assembly kit. Notice: in order to complete the whole plinth the front and rear element of the plinth must be selected. For enclosure Depth (mm) RAL7035 RAL NG NG NG NG hyperack plinth with a stabilizer Enclosure s protection from falling during pulling out the server or the shelf with loading. The height of plinth with a stabilizer equals 100 mm. In order to complete the whole plinth side panels must be filled with walls. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Pull-supporting frame. Width frame (mm) Depth frame (mm) RAL7035 RAL NG NG NG NG NG NG NG NG NG NG

67 Leveling feet hyperack Leveling feet are used for leveling the enclosure on the uneven surface. Possibility to attach to the enclosure or to the plinth. In case of arranging Hyperack enclosures in a row supports for the leveling feet must be ordered additionally. The static load: 500 kg per 1 foot. Scope of delivery: The set of 4 pcs. Element Leveling feet for Hyperack enclosure NA Feet leveling support hyperack Supports for leveling feet used in Hyperack enclosure which is arranged in a row and equipped with feet. Scope of delivery: The set of 4 pcs. Element Leveling feet support NA Cable clamp bracket HYPERACK Brackets for arranging the cables vertically. Mounted to the enclosure s frame in inside plate. Used for the cable affix. Material: Steel sheet #1,5 mm. Scope of delivery: Set of 1 pcs of the bracket. Depth / Width RAL7035 RAL " NG NG

68 hyperack Combination of outriggers and mounting horizontal bars / /

69 Outrigger for mounting of profile rails type 501 and 502 hyperack Construction outrigger, which allows to achieve distance of 19 (482,6 mm.) - type 501 or distance of 21 (515 mm) - type 502. Outrigger is assigned for internal mounting plate. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 2 pcs/package. For enclosure Package Width (mm) Depth (mm) Type 501 Type pcs NA NA pcs NA NA pcs NA NA pcs NA NA pcs NA NA Outrigger for mounting of profile rails type 503 and 504 hyperack Construction outrigger, which allows to achieve distance of 19 (482,6 mm.) - type 503 or distance of 21 (515 mm) - type 504. Outrigger is assigned for internal mounting plate. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 2 pcs/package. For enclosure Package Width (mm) Depth (mm) Type 503 Type pcs NA NA pcs NA NA pcs NA NA pcs NA NA pcs NA NA pcs NA NA Horizontal bar type 508 hyperack Construction horizontal bar type 508 mounted on side or front vertical planes of Hyperack enclosures. Bar is designed for external mounting plate. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 2 pcs/package. Width / Depth (mm) Package pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA

70 hyperack Horizontal bar type 509 Horizontal construction bar type 509 mounted on side or front vertical panels of Hyperack enclosures. The Bar is designed for external mounting plate. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 2 pcs/package. For the enclosures of width or depth (mm) Package pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA hyperack Horizontal bar type 510 Horizontal construction bar type 510 mounted on side or front vertical panels of Hyperack enclosures. The Bar is designed for external mounting plate. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 2 pcs/package. For the enclosures of width or depth (mm) Package pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA hyperack Fastening construction bar type 511 Wide fastening construction bar type 511 mounted on side or front vertical plates of Hyperack enclosures. The bar is assigned for internal mounting plate. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 2 pcs/package. For the enclosures of width or depth (mm) Package pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA

71 Fastening construction bar type 512 hyperack Narrow supporting construction bar type 512 mounted on the side or front vertical panels of Hyperack enclosures. The bar is assigned for external mounting panel. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 2 pcs/package. For the enclosures of width or depth (mm) Package pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA Fastening construction bar type 513 hyperack Narrow supporting construction bar type 513 mounted on the side or front vertical panels of Hyperack enclosures. The bar is assigned for internal mounting plate. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 2 pcs/package. For the enclosures of width or depth (mm) Package pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA Horizontal construction bar type 514 hyperack Fastening construction bar type 514, mounted on vertical panels between upper and lower parts of the Hyperack enclosure s frame. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 2 pcs/package. For the enclosures of width or depth (mm) Package szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA

72 hyperack Horizontal construction bar type 515 Construction bar type 515 is mounted on the side or front horizontal panels of Hyperack enclosure. It simulates the construction of the enclosure s frame (upper or lower) in the intermediate positions between the top and bottom of enclosure. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 2 pcs/package. For the enclosures of width or depth (mm) Package szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA hyperack Vertical construction bar type 507 Vertical construction bar type 507 mounted between upper and lower enclosure s panel on the side and front panel of the Hyperack enclosure. The construction bar is assembled on internal mounting panel. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 2 pcs/package. For the enclosures of width or depth (mm) Package szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA szt. NA

73 Vertical bar type 520 hyperack Vertical construction bar type 520 is mounted between upper and lower enclosure s panel on the side or front panel of the Hyperack enclosure. The construction bar is located on the external mounting panel. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 2 pcs/package. For enclosure height (mm) Package pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA pcs NA Mounting plate hyperack Mounting plate for building up modular apparatus. The plate can be mounted on the whole height of the enclosure or its part by using appropriate adaptive bars. Material: Hot galvanized steel sheet #2 mm Scope of delivery: In the package there are a mounting plate and an assembly kit. For enclosures Mounting plate dimensions Width (mm) Height (mm) Width (mm) Height (mm) NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG

74 hyperack Mounting panels dedicated for NH switchers Mounting panel is designed for mounting NH switchers (group 000, 00, 1, 2 and 3). Panel consists of carrying mounting plate, mounting supporters, which allow regulation of installed apparatus and front covering panel. Mounting panel is offered for inch and metrical profiles, selected accordingly to spacing of supporting profiles. Material: Hot galvanized steel sheet #2 mm. Colour: RAL7035. Additional information: Because of the wide variety of switchers offered on the market, it is being advised before making an order to make sure that it is possible to mount chosen switcher in the standard panels Scope of delivery: 1 pcs mounting panel with assembly kit in one package. Type of panel Panel for metrical profiles for NH000 switcher, Module height 300 mm Panel for metrical profiles for NH00 switcher, module height 300 mm Panel for metrical profiles for NH1 switcher, module height 450 mm Panel for metrical profiles for NH2 switcher, module height 450 mm Panel for metrical profiles for NH3 switcher, module height 450 mm Panel for inch profiles for NH000 switcher, module height 7U Panel for inch profiles for NH00 switcher, module height 7U Panel for inch profiles for NH1 switcher, module height 10U Panel for inch profiles for NH2 switcher, module height 10U Panel for inch profiles for NH3 switcher, module height 10U Maximum number Assembling width of switchers 19" 21" NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG hyperack Permanent shelf mounted to the enclosure s frame Permanent shelf mounted to the Hyperack enclosure s frame in 4 points. Maximum load capacity 50 kg. Material: Steel sheet #2 mm. Colour: RAL7035. Scope of delivery: Shelf with assembly kit. For enclosures Width (mm) Depth (mm) NG NG NG NG NG NG NG NG

75 Permanent shelf of high load capacity hyperack Permanent shelf with high load capacity mounted on the Hyperack enclosure s frame in 4 points. Maximum load capacity 300 kg. Material: Steel sheet #2 mm. Colour: RAL7035. Scope of delivery: Shelf with an assembly kit. For enclosures Width (mm) Depth (mm) NG NG NG NG NG NG NG NG Masking frame hyperack The masking frame covers space around the equipment installed to the mounting profiles. It can be used in a enclosure, with the mounting profiles installed in the distance of 75 mm from the front of the frame. Material: Steel sheet #2 mm. Colour: RAL7035. Scope of delivery: Set of 4 pcs plugs, two vertical and two horizontal with an assembly kit in one package. For enclosures Mounting Height enclosure Width enclosure profiles span (mm) (mm) Inch scale Metric scale Inch scale NG NG Inch scale NG NG Inch scale NG NG Entire width NG NG of the enclosure Inch scale NG NG Inch scale NG NG Inch scale NG NG Entire width NG NG of the enclosure Inch scale NG NG Inch scale NG NG Inch scale NG NG Entire width NG NG of the enclosure Inch scale NG NG Inch scale NG NG Inch scale NG NG Entire width NG NG of the enclosure Inch scale NG NG Inch scale NG NG Inch scale NG NG Entire width NG NG of the enclosure Inch scale NG NG Inch scale NG NG Inch scale NG NG Entire width NG NG of the enclosure 75

76 hyperack Swing frame model A Swing frame for mounting devices and components of equipment in 19 standard. Frame is designed for enclosures of 600 mm or 800 mm width. Flexible regulation of mounting frame in enclosure s depth. The frame can be mounted on the total height of the enclosure or on its part by using appropriate bars. Material: Steel sheet #1 mm. Colour: RAL7035. Scope of delivery: Package includes a complete swing frame with an assembly kit. Additional Information: Maximum load: 500 kg. The frame can be set aside up to angle of 95º. You can adjust the depth of the frame. For enclosures with a maximum height (mm) Height of usable (U) 600 mm 800 mm NG NG NG NG NG NG NG NG NG NG NG NG hyperack Swing Frame model B Swing frame is designed for mounting the devices in 19 standard, the maximum angle is 180 degrees. Material: Steel sheet #1 mm. Colour: RAL7035. Scope of delivery: Set of complete deflective frame with an assembly kit. Additional information: Maximum load capacity is 500 kg. You can adjust the depth of the frame. For enclosures with a maximum height (mm) Height of usable (U) 600 mm 800 mm NG NG NG NG NG NG NG NG NG NG NG NG hyperack Short horizontal grounding bar The grounding bar for protection and equalizing the potential. Material: Copper bar 15x4 mm. Scope of delivery: Grounding bar with an assembly kit. Additional information: Amount of connective points: For NA090012: 10xM5 and 1xM6, For NA090010: 20xM5 and 3xM6. Lenght (mm) Package kpl. NA kpl. NA

Long horizontal grounding bar hyperack The grounding bar for protection and equalizing the potential. For enclosures of width 600, 800 mm. Material: Copper bar 30x4 mm.

77 Long horizontal grounding bar hyperack The grounding bar for protection and equalizing the potential. For enclosures of width 600, 800 mm. Material: Copper bar 30x4 mm. Scope of delivery: Grounding bar with an assembling bar. Additional information: Amount of connective points: For NA091012: 26xM6, For NA091010: 38xM6. Lenght (mm) Package kpl. NA kpl. NA A kit for connecting enclosures hyperack A set of connectors for arranging Hyperack enclosures in a row. It exists in two options: for enclosures without side walls and for enclosures equipped with side walls. A set of connecting Hyperack enclosures without side walls includes vertical and horizontal connectors. The connection of the enclosures can be sealed to the range of protection IP 55 by using a set for sealing and arranged enclosures upper cover. A set for arranging Hyperack enclosures with side walls includes horizontal connectors which are mounted to upper edges of enclosures. Scope of delivery: A kit for connecting Hyperack enclosures. Element A kit for connecting enclosures NG Upper covers of connected enclosures hyperack Upper covers ensure the appropriate leakproofness of the arranged hyperack enclosures without side walls (with using the kit for connecting Hyperack enclosures at the same time). Material: Hot galvanized steel sheet #3 mm Scope of delivery: 2 angle bars with an assembly kit. Depth enclosure s frame (mm) 400 NG NG NG NG NG NG

hyperack Complete set of grounding cables A set of cables for grounding enclosure s structural elements such as: side walls, doors, bottom panel.

78 hyperack Complete set of grounding cables A set of cables for grounding enclosure s structural elements such as: side walls, doors, bottom panel. Material: Copper cables 6 mm with endings diameter 6 mm. Scope of Delivery: A set of grounding cables in the package. Package 1 set NA hyperack set for sealing screwed enclosures A set for sealing screwed (by using the set for connecting enclosures, catalogue number NG200000) Hyperack enclosures without side walls. Using the set allows to achieve the range of protection IP 55. It should be selected in accordance with the enclosure s depth. The length of the seal in the set is enough for sealing the enclosure of any height. Material: Hot galvanized steel sheet #1 mm, plastic SD83/4 Scope of delivery: 4 angle bars, rubber seal, assembly kit. Depth cabient frame (mm) 400 NG NG NG NG NG NG hyperack Separation compartment for enclosures joined in a row Separation compartment splits usable space in screwed enclosures that are arranged in a row due to the set of connecting enclosures (catalogue number NG200000). Material: Hot galvanized steel sheet #2 mm. Scope of delivery: 1 compartment with assambly kit for sealing the external connection of enclosures. For enclosures Width frame (mm) Depth frame (mm) NG NG NG NG NG NG NG NG NG NG NG

79 SOLID steel door AG Used for AG enclosures, they have 1 or 2 M22 locks for D5 key in accordance with the height. Material: Steel sheet #1,5 mm, steel zincked holders. Colour: RAL7035. Scope of delivery: Door with an assembly kit. Height (mm) Width (mm) DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC Glazed door AG Glazed door for AG enclosures have 1 or 2 M22 locks for D5 key accordingly to the height. The door allows to observe working appliances installed inside the enclosure. Material: Steel sheet #1,5 mm thick, tempered glass #4 mm. Colour: RAL7035. Scope of delivery: Door with an assembly kit. Height (mm) Witdh (mm) DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC

80 AG internal door Internal door for AG enclosure have 1 or 2 M22 locks for the key D5, which depends on the height. There is a possibility of mounting them as right or left open. Material: Steel sheet #1,5 mm. Colour: RAL7035. Scope of delivery: Door with an assembly kit. Height (mm) Width (mm) DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC AG Mounting plate Is used for installing modular apparatus inside the box, it is mounted on the whole accessible surface of the box. Material: Hot galvanized steel sheet #2 mm. Scope of delivery: Mounting plate with an assembly kit. For boxes Height (mm) Width (mm) DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ

81 Bar for door AG Bar for door used for mounting additional devices on the door plate from the internal side of the enclosure. Material: Hot galvanized steel sheet. Scope of delivery: Bar for door with an assembly kit. Width (mm) 200 DI DI DI DI DI DI Door opening limiter AG Door opening limiter is used as a blocking for maximum angle deflection of the door in accordance with the enclosure. Material: Hot galvanized steel sheet. Scope of delivery: Door opening limiter with an assembly kit. Package 1 pcs DK

82 AG lower cover with cut-out Lower cover with cut-out for brush or rubber strip panel. Material: Steel sheet #1,5 mm. Colour: RAL7035. Scope of delivery: Bottom cover with an assembly kit. For boxes of width Amount of cut-outs DG / / 2x2 DG DG AG Solid bottom cover Solid bottom cover is used for plugging a hole in the bottom of the enclosure. Material: Steel sheet #1,5 mm. Colour: RAL7035. Scope of delivery: Bottom cover with an assembly kit. For boxes of width Amount of cut-outs DG DG / / 2 DG DG AG Solid bottom panel Solid panel used as a hole plug of a bottom cover with a cut-out Material: Steel sheet #1,5 mm. Colour: RAL7035. Scope of delivery: Solid bottom cover with an assembly kit. Package 1 pcs DG

83 Rubber strip AG Mounted to the bottom cover with a cut-out. Scope of delivery: Rubber strip with an assembly kit. Additional information: Type 1 MC16: 15 x mm, 1 x mm; 116 ducts in total, leak-proofness IP54, Type 2 MC25: 1 x mm, 4 x mm, 12 x mm, 4 x 8-12 mm, 4 x 5-7 mm; 25 ducts in total, leak-proofness IP65 Type 3 MC35: 1 x mm, 2 x mm, 16 x mm, 14 x 8-12 mm, 2 x 6-10 mm; 35 ducts in total, leak-proofness IP65 Type of panel Type 1 MC16 Type 2 MC25 Type 3 MC35 DG DG DG Deep-seated profiles AG Deep-seated profiles are used for fastening the mounting plate. They allow to regulate the depth of plate position. Material: Hot galvanized steel sheet. Colour: RAL Scope of delivery: There are 4 pcs and the assembly kit in the package. For boxes with depth (mm) 150 DI DI DI DI DI Double leaf lock AG M22; the level of protection IP65. It has bolt edge D3 or D5. Scope of delivery: Double leaf lock M22 without a key. Type of key D3 D5 OK OK

84 AG patented lock A lock with a tumbler insert under the key code M22 possess a range of protection IP65. Scope of delivery: Lock with a tumbler insert and a key. Key code 1333 OK AG Key for the leaf lock A key for the leaf lock D3 or D5. Scope of delivery: Set of keys for the lock. Key D3 D5 OK OK AG Key for PATENT LOCK A key for the patent lock with key code Scope of delivery: The set of keys for the lock. Key code 1333 OK

85 set of grounding CABLES AG The set of grounding cables to the chosen enclosure s plate. Material: Copper wiring 6mm with diameter edges 6mm of 200 mm length. Scope of delivery: Ground cable. Package 1 pcs DM Adapter for door switch AG Adapter for door switch mounted inside the box. Material: Hot galvanized steel sheet. Scope of delivery: Switcher s supporter. Package 1 pcs OZ

ABL Solid door Solid steel door with a single point locking with a system of neodymium magnets, pull handle and patent lock. Can be mounted both front or rear. The door are sold as right opened.

86 ABL Solid door Solid steel door with a single point locking with a system of neodymium magnets, pull handle and patent lock. Can be mounted both front or rear. The door are sold as right opened. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Door with a handle and patent lock, set of hinges and assembly kit. Enclosure height (U) Enclosure witdh (mm) RAL7035 RAL BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC ABL Glazed door Glazed door with a single point locking with a system of neodymium magnets, pull handle and patent lock. Can be mounted as front or rear. The door are sold as right opened. Material: Steel sheet #1,5 mm, toughened glass #4 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Door with a handle and patent lock, set of hinges and assembly kit. Enclosure height (U) Enclosure witdh (mm) RAL7035 RAL BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC BC ABL Perforated door Perforated steel door with a single point locking with a system of neodymium magnets, pull handle and patent lock. Can be mounted both front or rear. The range of protection IP20, perforation 80%. The door are being sold as right opened. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Door with a handle and patent lock, set of hinges and assembly kit. Enclosure height (U) Enclosure witdh (mm) RAL7035 RAL BC BC BC BC BC BC BC BC BC BC BC BC

87 Screw-fastened side walls ABL Screw-fastened perforated side wall, mounted to the side plate of the enclosure. Range of protection: IP20. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: 2 screw-fastened side walls with an assembly kit. Wall s dimensions Height (U) Depth (mm) RAL7035 RAL BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE BE Panel with brush strip ABL Panel with brush cable strip is mounted to the rear wall of the ABL enclosure. Range of protection: IP20. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Package includes a panel with a brush strip with assembly kit. For enclosures of width (mm) RAL7035 RAL BD BD BD BD HIGH Roof Side-perforated ABL High roof side-perforated with a brush strip panel is assigned for ABL enclosures with gravitational and forced air circulation. It exists in two colouristic versions. Height of the roof: 70 mm. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: High roof with assembly kit. For enclosure Witdh (mm) Depth (mm) RAL7035 RAL BF BF BF BF BF BF BF

88 ABL Solid floor Solid floor for ABL enclosure. Material: Steel sheet #1,5 mm. Scope of delivery: Floor with an assembly kit. For enclosures Witdh (mm) Depth (mm) RAL7035 RAL BG BG BG BG BG BG BG BG BG BG ABL Plinth s corners Plinth s corners are used for building up the plinth in ABL enclosures. Height: 100 mm. Material: Steel sheet #1,5 mm. Scope of delivery: Set of 4 pcs with an assembly kit. Additional information: In order to build the whole plinth you need to select appropriate front and rear walls. Height (mm) RAL7035 RAL BH BH ABL Plinth s full walls Full plinth s walls are used as a side filling of the plinth. Material: Steel sheet #1,5 mm. Colour: RAL035 or RAL9005. Scope of delivery: 1 pcs of the wall with an assembly kit. Height (mm) Witdh (mm) RAL7035 RAL BH BH BH BH BH BH

89 Plinth s perforated walls ABL Side plinth s panels are used as a side filling of the plinth. Material: Steel sheet #1,5 mm. Colour: RAL035 or RAL9005. Scope of delivery: 1 pcs of the wall with an assembly kit. Height (mm) Witdh (mm) RAL7035 RAL BH BH BH BH BH BH Side plinth s panels with a brush strip ABL Side plinth s panels with brush strip are used as a side filling of the plinth. Material: Steel sheet #1,5 mm. Colour: RAL035 or RAL9005. Scope of delivery: 1 pcs of the wall with an assembly kit. Height (mm) Witdh (mm) RAL7035 RAL BH BH BH BH Leveling feet ABL Leveling feet are used for balancing the enclosure on the uneven surface. They can be attached directly to the enclosure s frame or to the plinth. Scope of delivery: Set of 4. Element Leveling feet BZ

90 ABL kit for connecting enclosures The kit of connectors for the ABL enclosures, that enables their arrangement in a row. Scope of delivery: Enclosure combining set for dedicated ABL enclosures. Package 1 set BZ HB2 Plate with gravitational ventilation The plate with gravitational ventilation is equipped with replaceable filter, which prevents from dust penetrating to the enclosure s interior. Material: Aluminium sheet #1,5 mm. Scope of delivery: Plate with an assembly kit. Height (mm) Depth (mm) CF HB2 Plate for 4 fans with plug panels The plate for 4 fans with the plug panel for the cable strip. Fans are ordered separately accordingly to the customers requirements. The plate is mounted on the enclosure s top panel. Material: Aluminium sheet #1,5 mm. Scope of delivery: Plate with an assembly kit. Witdh (mm) Depth (mm) CF

91 Solid plate HB2 Solid plate as a roof s external building-up, mounted on the ceiling of the enclosure. Material: Aluminium sheet #1 mm. Scope of delivery: Plate with an assembly kit. Witdh (mm) Depth (mm) CF Fan chamber with anti-snow cover HB2 Fan chamber with anti-snow cover with 2 fans, with a sealing up to IP55. Mounted on the top panel of the enclosure. Material: Aluminium sheet #1 mm. Colour: RAL7035. Scope of delivery: Fan chamber with an assembly kit. Witdh (mm) Height (mm) Depth (mm) CF Fans HB2 Fans used for the plate for fans with a trim panel. The fans force the air circulation inside the enclosure. Scope of delivery: Fan with an assembly kit. PWM The power of voltage Power NO 230 VAC 25W KW NO 48 VDC 12W KW YES 48 VDC 12W KW

92 HB2 side solid floor Side solid floor with a possibility of making individual holes for PG stripes. Material: Aluminium sheet #2 mm. Colour: RAL7035. Scope of Delivery: Side floor with an assembly kit. Witdh (mm) Depth (mm) CG CG CG CG HB2 Floor with a foam PASS As a side building up of three sectional floor. Material: Aluminium sheet #2 mm. Colour: RAL7035. Scope of delivery: Floor with a foam strip and an assembly kit. Witdh (mm) Depth (mm) CG CG CG CG HB2 Floor with A rubber ductings Floor with a rubber strip used as additional element of the three sectional floor. Type 3 MC35: 1 x mm, 2 x mm, 16 x mm, 14 x 8-12 mm, 2 x 6-10 mm; 35 cables in total; level of leakproofness IP 65. Material: Aluminium sheet #2 mm. Scope or delivery: Floor with a rubber strip with an assembly kit. Type of strip Witdh (mm) Depth (mm) CG TYPE 3 MC CG CG CG

93 Fire screen bulkhead HB2 Fire screen bulkhead consists of a set of single screens mounted into plinth. Its construction is integrated with the enclosure s plinth. Material: Hot galvanized steel #2 mm. Scope of delivery: Fire stop bulkhead. Witdh (mm) Depth (mm) CH CH CH CH Rail for cable handles HB2 Is used for mounting cable handles as in AZ Material: Hot galvanized steel #2 mm. Scope of delivery: Rail for cable handles with assembly kit. Witdh (mm) 700 CM CM Cable handles HB2 Cable handles are used for attaching cables to the rail for cable handles. Material: Hot galvanized steel #2 mm. Scope of delivery: 10 pcs of cable handles. Package 10 pcs AZ

94 HB2 construction bars 19/21 Construction regulated bars 19 /21 are mounted on the side panels of the HB2 enclosure. They are used for achieving 19 on the mounting angles type B or L and as a supportive construction of the mounting plate. Material: Hot galvanized steel #2 mm. Scope of delivery: Set of 4 bars with assembly kit. Witdh (mm) Depth (mm) CI CI CI CI HB2 Flat mounting bar Is mounted to the side or rear plates of HB2 enclosure. The bar is assigned to the external mounting plate. Material: Hot galvanized steel #2 mm. Scope of delivery: Flat mounting bar with assembly kit. Witdh (mm) 500 CI CI CI HB2 Mounting plate Mounting plate for building up the modular apparatus. There is a possibility of mounting as a partial enclosure s building up. Material: Hot galvanized steel #2 mm. Scope of delivery: Mounting plate with assembly kit. Additional information: For the kit of mounting plate it is required to order a set of construction bars for the enclosures of depth 500 mm - CI and 700 mm - CI For enclosures Witdh (mm) Height (mm) CJ CJ CJ CJ CJ CJ CJ CJ

95 Copper grounding bar HB2 The protective bar is used for separating inactive cable and grounding cable. Material: Copper bar 15x4 mm 2. Scope of delivery: Grounding bar with an assembly kit. Package 1 pcs CZ Concrete foundation HB2 The foundation is made of five concrete elements connected sideways by two screw-bolts. Its construction allows to insert cables out of four directions from cable channel. From the top of foundation there are four screw-bolts used for placing the enclosure on the ground (fire screen bulkhead). Material: Concrete. Scope of delivery: Foundation with an assembly kit. Witdh (mm) Depth (mm) OZ OZ OZ OZ

96 HB2 Battery shelf The shelf of high load capacity 300 kg, made of zinced steel sheet. It is assigned for storing sets of accumulators in the battery chamber. Material: Hot galvanized steel #2 mm. Scope of delivery: Battery shelf with an assembly kit. Witdh (mm) Depth (mm) CN HB2 Partition plate The plate is used for application of battery enclosures. It divides the space in the enclosure into battery chamber and electronics chamber. Material: Hot galvanized steel #1,5 mm. Scope of delivery: The separation plate with assembly kit. Witdh (mm) Depth (mm) CN

97 Profile rails with inch scale type B Universal Profile rails with inch scale of 44,45 mm height (1U) for mounting rack type devices of 19 width (482,6 mm) or 21 (515 mm). Material: Steel sheet #1 mm. Scope of delivery: 2 pcs with an assembly kit. Note: Mounting profiles can be used to enclose 19 and 21 devices. In order to do that, you are supposed to use proper outriggers. Max housing height (mm) Height of usable (U) NA NA NA NA NA NA NA NA NA Profile rails with metrical scale type B Universal Profile rails with metrical scale of 44,45 mm (1U) height for mounting rack type devices of 19 width (482,6 mm) or 21 (515 mm). Material: Steel sheet #1 mm. Scope of delivery: 2 pcs with assembly kit in the package. Note: Mounting profiles can be used to enclose 19 and 21 devices. In order to do that, you are supposed to use proper outriggers. Max housing height (mm) Units 50 mm NG NG NG NG NG Profile rails type L Universal Enable to install rack equipment of the width 19 or 21 in the enclosure and the height from 1U to 47U maximum. Material: Steel sheet #1 mm. Scope of delivery: There are 2 pcs with assembly kit in the package. Note: Mounting profiles can be used to enclose 19 and 21 devices. In order to do that, you are supposed to use proper outriggers. Max housing height (mm) Height of usable (U) NA NA NA NA NA NA NA NA NA

98 Universal metrical masking panels Metrical masking panels are intended for filling empty spaces in the rack system. Material: Steel sheet #1,5 mm. Colour: RAL7035. Scope of delivery: Panel with assembly kit. Height (mm) Width assembly 19" 21" 800 mm 50 NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG NG Universal Inch masking panels Inch masking panels are intended for filling empty space in the rack system, they are mounted without any tools. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Panel with assembly kit. Height (U) RAL7035 RAL9005 RAL7035 RAL NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

99 Masking panels with a brush strip Universal Masking panels with a brush strip and a cable management panel. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: Panel with assembly kit. Height (mm) Witdh RAL7035 RAL9005 1U 19" NA NA U 19" NA NA Masking panels with a brush strip and a cable management panel Universal Masking panels with a brush strip and a cable management panel. Offered dimensions: 1U. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: There is a panel with assembly kit. Height Witdh RAL7035 RAL9005 1U 19 NA NA Cable management panels Universal Cable organizer; offered dimensions: 1U and 2U Material: Steel sheet #1,5 mm, galvanized steel handles. Colour: RAL7035. Scope of delivery: Cable organizer with assembly kit. Height (U) Depth (mm) Realization Number of holders RAL7035 RAL9005 1U 50 Single 5 NA NA U 80 Double 5 NA NA U 50 Single 10 NA NA U 80 Double 10 NA NA U 50 Single 5 NA NA U 80 Double 5 NA NA U 50 Single 10 NA NA U 80 Double 10 NA NA

100 Universal Cable organizer type 2 Cable organizer equipped with cable holders, assembled to the mounting rails of distance 19 The height of the organizer 1U. Material: Steel sheet #1,5 mm, steel holders, painted. Colour: RAL7035 or RAL9005. Scope of delivery: Cable organizer with assembly kit. Witdh Depth (mm) RAL7035 RAL mm BM BM Universal Cable clamp brackets Designed for vertical cable organization. Mounted to the enclosure s frame in the internal plate. They are used with cable ties. Material: Steel sheet #2 mm. Colour: RAL7035 or RAL9005. Scope of delivery: One pcs in the package. Depth / Witdh RAL7035 RAL mm NG NG mm NG NG mm NG NG Universal Transport lugs Lugs for Hyperack enclosure lift transportation. Material: Steel sheet. Scope of deliver:y 4 pcs of transport lugs. Type of holder Single holder NG

101 Immovable shelf 1U mounted to19 rack Universal Immovable shelf mounted to four mounting profiles 19. The shelf is made of steel sheet 2 mm with perforation. Mounting height 1U. Load capacity: 75kg. Material: Steel sheet #2 mm. Colour: RAL7035 or RAL9005. Scope of delivery: 1 immovable shelf mounted to the rack 19 with assembly kit. Shelf s dimensions Witdh Depth (mm) RAL7035 RAL NA NA NA NA NA NA NA NA Shelf 2U for two mounting profiles 19 Universal Immovable shelf assembled in two points to mounting profiles 19. Mounting height 2U. Load capacity: 25kg. It covers space of 2U on the rack 19. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: 1 immovable 2U shelf 19 with assembly kit. Witdh (mm) Depth (mm) RAL7035 RAL NA NA NA NA NA NA NA NA Shelf with adjustable depth 19 Universal Assembled in 4 points of mounting rails of 19 distance. Maximum load capacity 100 kg. Height of the shelf: 1U. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope or delivery: 1 shelf with assembly kit. For enclosures Witdh (mm) Depth range (mm) RAL7035 RAL NA NA

102 Universal Keyboard drawer 1U Pull-out drawer shelf mounted to the rack 19 in two points. Mounting height 1U. Max. keyboard width: 395mm, depth of the shelf: 403mm, max. pull-out: 400mm. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: 1 keyboard drawer with assembly kit. Witdh RAL7035 RAL NA NA Universal Cable storage drawer PSP 7 Is intended for installing in 19 standard rack system. Height: 1U. It allows to gather and organize the storage of fibre optic cable, it is functional and easy to install. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: 1 cable storage drawer with assembly kit. Height (U) RAL7035 RAL NA NA Universal 19 splice box PSP 14 Fixed, intended for installing in 19 standard rack system. It allows to gather the storage of fibre optic cable and installation of splice cassettes. Equipped with replaceable system of cassettes attachment, antitwist and holding system. It enables cable finishing and their distribution thanks to replaceable front plates and cable entries. Additional elements: The number of mounted connectors/openings depends on the height of the enclosure; replaceable front plates, straight cable entries (plates), angular, blank.material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: 1 splice box 19 with assembly kit. Height (U) RAL7035 RAL NA NA NA NA NA NA NA NA

103 19 splice box PSP 141 Universal Fixed with a possibility of depth regulation, intended for installing in 19 rack system. It allows to gather the storage of fibre optic cable and install of splice cassettes. Equipped with replaceable system of cassettes attachment, anti-twist and holding system. It enables cable finishing and their distribution thanks to replaceable front plates and cable entries. Additional elements: The number of mounted connectors/openings depends on the height of the enclosure; replaceable front plates, straight cable entries (plates), angular, blank. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: 1 splice box 19 with assembly kit. Height (mm) RAL7035 RAL NA NA NA NA NA NA NA NA splice box PSP 15 Universal Movable, intended for installing in 19 rack system. It allows to gather the storage of fibre optic cable and install of splice cassettes. Equipped with replaceable system of cassettes attachment, antitwist system and holding system. It enables cable finishing and their distribution thanks to replaceable front plates and cable entries. Additional elements: The number of mounted connectors/openings depends on the height of the enclosure; replaceable front plates, straight cable entries (plates), angular, blank. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: 1 splice box 19 with assembly kit. Height (mm) RAL7035 RAL NA NA NA NA NA NA NA NA splice box PSP 16 Universal Movable due to slideways intended for installing in 19 standard rack system. It allows to gather the storage of fibre optic cable and install of splice cassettes. Equipped with replaceable system of cassettes attachment, anti-twist system and holding system. It enables cable finishing and their distribution thanks to replaceable front plates and cable entries. Additional elements: The number of mounted connectors/openings depends on the height of the enclosure; replaceable front plates, replaceable cable entries (plates) straight, angular, blank. Material: Steel sheet #1,5 mm. Colour: RAL7035 or RAL9005. Scope of delivery: 1 splice box 19 with assembly kit. Height (U) RAL7035 RAL NA NA NA NA NA NA NA NA

Universal Front walls of splice boxes Height of enclosure 1U RAL7035 RAL9005 Number of connectors 024 024 SC Duplex NA214201 NA215201 SC, E-2000 NA214211 NA215211 FC, D shape NA214221 NA215221 FC

NA215412 FC, D shape - NA214422 - NA215422 FC - NA214432 - NA215432 ST - NA214442 - NA215442 FC - ST - NA214452 - NA215452 Height of enclosure 3U RAL7035 RAL9005 Number of connectors 048 072 072 SC

104 Universal Front walls of splice boxes Height of enclosure 1U RAL7035 RAL9005 Number of connectors SC Duplex NA NA SC, E-2000 NA NA FC, D shape NA NA FC NA Na ST NA NA FC - ST NA NA Height of enclosure 2U RAL7035 RAL9005 Number of connectors SC Duplex NA NA SC, E NA NA FC, D shape - NA NA FC - NA NA ST - NA NA FC - ST - NA NA Height of enclosure 3U RAL7035 RAL9005 Number of connectors SC Duplex NA NA SC, E NA NA FC, D shape - NA NA FC - NA NA ST - NA NA FC - ST - NA NA Height of enclosure 4U RAL7035 RAL9005 Number of connectors SC Duplex NA NA SC, E-2000 NA NA NA NA FC, D shape NA NA FC NA NA ST NA NA FC - ST NA NA

ACCESSORIES FOR SZE2 CABINETS

ACCESSORIES FOR SZE2 CABINETS ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked