CONTA-CONNECT. Disconnect terminals TRK/STK 2/TK

Size: px
Start display at page:

Download "CONTA-CONNECT. Disconnect terminals TRK/STK 2/TK"

Transcription

1 CONTACONNECT s TRK/STK 2/TK s are commonly used within measurement and control systems. They provide assistance when troubleshooting in electrical facilities, when commissioning new facilities and when revising old facilities. These series come with a combifoot for installation on a TS 32/TS 35 rails or with a snapon foot for the TS 5 DIN rail. 62

2 s TRK/STK 2/TK Different versions Features The TRK.5 (disconnectblade terminal) and Features of the TRK.5/TRK.5 DS the TRK.5/DS (disconnect plug) variants are Same construction as the standard terminal both available. blocks A sturdy, closed insulation housing The established disconnectblade with highquality surfaces Minimal and stable level of contact resistance Touchsafe protection also during the disconnect process SCREW CONNECTION SYSTEM The TRK.5/STB and TRK.5/ 5/STB versions offer the advantage of preassembled socket plugs instead of terminal screws. Without any additional accessories, these disconnect terminals feature a test pickoff to be used for speedier troubleshooting or as a measurement pickoff for comparing standardized signals. Features of the TRK.5/STB and TRK.5/5/STB Same construction as the standard terminal blocks A sturdy, closed insulation housing The established disconnectblade with highquality surfaces Minimal and stable level of contact resistance Touchsafe protection also during the disconnect process Test pickoff Disconnect plugs and diode plugs for the TRK.5/DS disconnect terminals are available separately in four versions. Disconnect plug without circuitry DS TRK.5 ( ) Disconnectplug with wire jumper DS TRK.5 (..2) Disconnect plug with diode in blocking direction DS TRK.5 (. 40.2) Disconnect plug with diode in passthough direction DS TRK.5 ( ) The TK 2 and STK 2 /K series feature a hinged lever for disconnecting. The lever comes with a contact sleeve. Features of the TK 2/STK 2 /K Same construction as the standard terminal blocks hinged lever latches into fully open position. s can be used as fusedisconnect terminals by removing the contact ferrules. 63

3 s TRK system TRK.5/5 CONTACONNECT TRK.5/5 STB TRK.5/5 DS Foot can be snapped on TS 5, TS 32 and TS 35 DIN rails Housing made from Polyamide 6.6 UL 4V2 Connection diagram Connection type Size (L x W x H) mm with TS 5 mm Size (L x W x H) mm with TS 32 mm Size (L x W x H) mm with TS 35 x 7.5 mm Type Type 2 socket plugs colour Type 2 socket plugs colour Colours available Rated specifications acc. to Rated voltage, V Rated current, A Rated wire crosssection, mm 2 AWG Rated impulse voltage, kv Contamination degree Plug gauge acc. to EN Flamm. class acc. to UL 4 Connection data Single wire (solid) / Stranded mm 2 Stranded/stranded (w/ferrules acc. to DIN 46 22/) mm 2 Contact wire range, mm 2 Stripping length, mm Torque, Nm Screw Special connection, mm Features Material of insulated housing Temperature range Number of crossconnection channels Test pickoff Accessories Test plug PS External insulated crossconnection AQI 2 poles External insulated crossconnection AQI 3 poles External insulated crossconnection AQI 4 poles Disconnectplug with wire jumper Disconnectplug with diode N7/A Disconnectplug with diode N7/A Disconnect plug without circuitry End stop ES Screwdriver SDB Quick marking PMC SB 4 x 6 x 3.3 TRK.5/5 BG 32.2 TRK.5/5 BU Slotted PA to +05 C AQI 4/6/ YE AQI 3/6/7 YE AQI 4/6/7 YE ES 5 BG 06.0 PMC SB 6/ WH 0 4 x 6 x 3.3 TRK.5/5/STB BG 33.2 TRK.5/5/STB BU Slotted PA to +05 C 2 AQI 4/6/ YE AQI 3/6/7 YE AQI 4/6/7 YE ES 5 BG 06.0 PMC SB 6/ WH 0 4 x 6 x 56.3 TRK.5/5/DS BG 36.2 TRK.5/5/STB/DS BG Refer to page Slotted PA to +05 C AQI 4/6/ YE AQI 3/6/7 YE AQI 4/6/7 YE DS /TRK.5 YE.2 DS 2/TRK.5 YE DS 3/TRK.5 YE DS 4/TRK.5 YE ES 5 BG PMC SB 6/ WH 0 More accessories starting on page

4 TRK.5 TRK.5/STB TRK.5/DS TRK.5 SCREW CONNECTION SYSTEM TRK.5 BG 30.2 TRK.5 BU x 6 x x 6 x x 6 x x 6 x 4.3 TRK.5/STB BG 3.2 TRK.5/STB BU x 6 x 70 4 x 6 x 65 TRK.5/DS BG 34.2 TRK.5/STB/DS BG TRK.5 BG x 6 x 70 4 x 6 x 65 TRK.5/STB BG Slotted Slotted Slotted Slotted PA to +05 C AQI 4/6/ YE AQI 3/6/7 YE AQI 4/6/7 YE PMC SB 6/ WH 0 PA to +05 C 2 AQI 4/6/ YE AQI 3/6/7 YE AQI 4/6/7 YE PMC SB 6/ WH 0 PA to +05 C AQI 4/6/ YE AQI 3/6/7 YE AQI 4/6/7 YE DS /TRK.5 YE.2 DS 2/TRK.5 YE DS 3/TRK.5 YE DS 4/TRK.5 YE PMC SB 6/ WH 0 PA to +05 C AQI 4/6/ YE AQI 3/6/7 YE AQI 4/6/7 YE DS /TRK.5 YE.2 DS 2/TRK.5 YE DS 3/TRK.5 YE DS 4/TRK.5 YE PMC SB 6/ WH 0 65

5 s STK TK system STK 2/5/K CONTACONNECT STK 2/K STKD /K Foot can be snapped on TS 5, TS 32 and TS 35 DIN rails Housing made from polyamide 6.6 UL 4V2 Connection diagram Connection type Size (L x W x H) mm with TS 5 mm Size (L x W x H) mm with TS 32 mm Size (L x W x H) mm with TS 35 x 7.5 mm Type Type Two colour Type Two colour Colours available Rated specifications acc. to Rated voltage, V Rated current, A Rated wire crosssection, mm 2 AWG Rated impulse voltage, kv Contamination degree Plug gauge acc. to EN Flamm. class acc. to UL 4 Connection data Single wire (solid) / Stranded mm 2 Stranded/stranded (w/ferrules acc. to DIN 46 22/) mm 2 Contact wire range, mm 2 Stripping length, mm Torque, Nm Screw Special connection, mm Features Material of insulated housing Temperature range Number of crossconnection channels Test pickoff Accessories End plate AP External insulated crossconnection AQI 2 poles External insulated crossconnection AQI 3 poles External insulated crossconnection AQI 4 poles solid link KH End stop ES Screwdriver SDB Quick marking PMC SB 4 x x 34 STK 2/5/K BG ) 32.2 STK 2/5/K BU ) 32.5 IEC Slotted 27 PA to +05 C AP/SI2 BG 26.2 AQI 2// YE AQI 3// YE AQI 4// YE ES 5 BG 06.0 PMC SB /40 WH STK 2/K BG ) 3.2 STK 2/K BU ) x x 43,3 4 x x 3 27 IEC Slotted PA to +05 C AP/SI2 BG 26.2 AQI 2// YE AQI 3// YE AQI 4// YE PMC SB /40 WH Sc 67 x x x x 55,5 STKD /K BG ) 33.2 STKD /K BU ) 33.5 IEC Slotted 27 PA to +05 C AP/SID BG 27.2 AQI 2// YE AQI 3// YE AQI 4// YE PMC SB /40 WH More accessories starting on page 264. ) with solid link

6 TK 2/5 K TK 2/K SCREW CONNECTION SYSTEM 57,5 x x 3,5 TK 2/5/K BG ) 24.2 TK 2/5/K BU ) 24.5 TK 2/K BG ) 23.2 TK 2/K BU ) ,5 x x 45,5 57,5 x x 4 IEC UL IEC UL Slotted PA to +05 C AP SI BG AQI 2// YE AQI 3// YE AQI 4// YE ES 5 BG 06.0 PMC SB /40 WH Slotted PA to +05 C AP SI BG AQI 2// YE AQI 3// YE AQI 4// YE PMC SB /40 WH ) with solid link 67

CONTA-CONNECT. Double-level terminal blocks ZRKD 2,5 Double-level protective earth terminal ZSLD 2,5

CONTA-CONNECT. Double-level terminal blocks ZRKD 2,5 Double-level protective earth terminal ZSLD 2,5 CONTA-CONNECT Double-level terminal blocks ZRKD 2,5 Double-level protective earth terminal ZSLD 2,5 With a width of just 5 mm, the new ZRKD series is available in thirteen versions and connects with stranded

More information

DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD

DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD PRODUCT INFORMATION Double-level terminal blocks SRKD SSLD CONTA-CLIP offers an innovative line of double-level feed-through terminals SRKD and protective-earth terminals

More information

EKB 1,5/...DS M 2,6 M 2,6 M 3. Cuttable terminal 1.5 mm 2 with wire protection. Screw connection. 95.4* x 18 x 14. Qty. Length, mm

EKB 1,5/...DS M 2,6 M 2,6 M 3. Cuttable terminal 1.5 mm 2 with wire protection. Screw connection. 95.4* x 18 x 14. Qty. Length, mm Cuttable terminal strips EKB system EKB,5/...DS EKB,5/... EKB /...DS The EKB variants cover a rated crosssection range from.5 to 0 mm2. They are available from to 2 poles. An attachment hole is located

More information

CONTA-CONNECT. Overview. Overview... 2 Our company... 3

CONTA-CONNECT. Overview. Overview... 2 Our company... 3 SUPPLEMENTS CONTA-CONNECT Overview Overview... 2 Our company... 3 system SRK SSL... 4 Feed-through terminals SRK Protective earth terminals SSL... 8 Double-level terminal blocks SRKD SSLD... 6 Pick-off

More information

CONTA-CONNECT SUPPLEMENTS

CONTA-CONNECT SUPPLEMENTS CONTA-CONNECT SUPPLEMENTS CONTA-CONNECT system HSKG High-power stud terminals HSKG The newest generation of stud terminals from CONTA-CLIP offers secure connections for all energy-transmitting applications.

More information

SCREW-TYPE DISTRIBUTION BLOCKS

SCREW-TYPE DISTRIBUTION BLOCKS SCREW-TYPE DISTRIBUTION BLOCKS PRODUCT INFORMATION CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space

More information

SCREW-TYPE DISTRIBUTION BLOCKS

SCREW-TYPE DISTRIBUTION BLOCKS CONTA-CONNECT SCREW-TYPE DISTRIBUTION BLOCKS Our ideas Your advantages CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power

More information

Stud connection system HSK

Stud connection system HSK CONTA-CONNECT system HSK The newest generation of stud terminals from CONTA-CLIP offers secure connections for all energy-transmitting applications. Depending on the conductor cross-section, stud terminals

More information

FEED-THROUGH TERMINALS SDK

FEED-THROUGH TERMINALS SDK FEE-THROUGH TERMINALS SK PROUT INFORMATION ONTA-ONNET Feed-through terminals SK ONTA-LIP's SKs feed-through terminals provide a modular-based system for various device and housing applications. The coordinated

More information

Datasheet. W-series terminal with clamping yoke connection WSI 6

Datasheet. W-series terminal with clamping yoke connection WSI 6 The fuse terminals of the Weidmüller W Series are available in two different forms: Fuse terminal with pivoting retaining lever Fuse terminal with plug-in SIHA fuse holder General ordering data Order No.

More information

Datasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data

Datasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data Datasheet Art.No. 57.504.0055.6 Feed-through terminal WK 4 / U BLUE /V0 Feed-through DIN rail terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 4 mm², width 6

More information

Data sheet. W-Series WDU 4 SL/EN

Data sheet. W-Series WDU 4 SL/EN At Weidmüller, new solutions for the energy sector are developed according to local or application-based installation requirements. In some countries, control and protection of switching installations

More information

CONTA-CONNECT. High-power stud terminals HSK. a b

CONTA-CONNECT. High-power stud terminals HSK. a b CONTACONNECT Highpower stud terminals HSK The newest generation of stud terminals from CONTACLIP offers a secure connection for all energytransmitting applications. Depending on the conductor crosssection,

More information

Female socket block, Screw connection, No. of poles: 12, Width: mm, Colour: Green

Female socket block, Screw connection, No. of poles: 12, Width: mm, Colour: Green Female socket block, Screw connection, No. of poles: 12, Width: 45.72 mm, Colour: Green Business data Connector version Free connector Packaging unit 50 Quantity unit PC Packaging type Carton Type of banding

More information

Powermate Range pitch 7.00 Powermate Range pitch 7.00

Powermate Range pitch 7.00 Powermate Range pitch 7.00 Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket

More information

Electronic Circuit Breaker ESS20-0..

Electronic Circuit Breaker ESS20-0.. Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode

More information

Crimpmate Range pitch 5.00

Crimpmate Range pitch 5.00 Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular

More information

Printview: Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning option - Item No.

Printview: Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning option - Item No. Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1- pole; CAGE CLAMP ; commoning option Item No: 745-871/006-000 Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning

More information

8WH2 Spring-Loaded Terminals

8WH2 Spring-Loaded Terminals 8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25

More information

Datasheet. W-series terminal with clamping yoke connection WDU 2.5 RT

Datasheet. W-series terminal with clamping yoke connection WDU 2.5 RT The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality

More information

Data sheet... W-Series WPE 4

Data sheet... W-Series WPE 4 The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² WPE 4N). General ordering data Order No. 1010100000

More information

PCB plug-in connectors

PCB plug-in connectors Contents CB plug-in connectors.16 mm pitch.16 mm pitch Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 Male connectors with solder connection SU.16H/9 Derating

More information

Rated voltage (V) Current (A) Stranded wire. Solid wire A.D.O. (AWG)

Rated voltage (V) Current (A) Stranded wire. Solid wire A.D.O. (AWG) Characteristics (1) Dimensions are on DIN 3 rail : PR4 (Height 15 mm) Use of a PR3 rail : remove 7,5 mm on dimension B Use of a DIN 1 rail : remove 2,5 mm on dimension B remove 5 mm on dimension C Miniblocks

More information

8WH6 ipo Installation Terminals

8WH6 ipo Installation Terminals /2 Introduction /4 8WH through-type terminals /6 8WH through-type screw terminals /8 8WH N-conductor isolating terminals /10 8WH N-conductor isolating screw terminals /12 8WH installation terminals More

More information

With magnetic fixing With ON/OFF switch

With magnetic fixing With ON/OFF switch 7L Series - LED lamps 7L LED lamps for the cabinet Energy-saving (LED technology) Power consumption 5 W Luminous flux equivalent to a 95 W incandescent bulb Magnetic, screw or clip fixing With ON/OFF switch

More information

Han ES Press. Features. Description. Removal of conductor. Size 6 B - 24 B

Han ES Press. Features. Description. Removal of conductor. Size 6 B - 24 B Size 6 B - 24 B Features Easy bridging functionality of contacts by means of plug-in jumpers directly on the connector Fast realisation of potential multiplication as well as star and delta bridges Rapid

More information

NEW. Datasheet. WMF 2.5 Terminal Series

NEW. Datasheet. WMF 2.5 Terminal Series Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and

More information

Position Switches Series 8060/2

Position Switches Series 8060/2 www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50047 > Degree of protection IP66 / IP67 > Extensive assortment of

More information

Data sheet... W terminal earth terminal WPE 4

Data sheet... W terminal earth terminal WPE 4 The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² N). General ordering data Order No. 1010100000 Type

More information

Data sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX

Data sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14

More information

Datasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX

Datasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.

More information

UK 6-FSI/C. Extract from the online catalog. Order No.:

UK 6-FSI/C. Extract from the online catalog. Order No.: Extract from the online catalog UK 6-FSI/C Order No.: 3118203 Flat-type fuse terminal block, cross section: 0.2-6 mm², AWG: 26-8, width: 8.2 mm, color: black Commercial data EAN 4017918100605 Pack 50 pcs.

More information

Position Switches Series 8070/2

Position Switches Series 8070/2 www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 / IP67 > Extensive assortment of

More information

8WH2 Spring-Loaded Terminals

8WH2 Spring-Loaded Terminals 8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25

More information

Datasheet. Ring Lug Terminal Blocks ST5, ST5-16mm 2, ST6 and ST25

Datasheet. Ring Lug Terminal Blocks ST5, ST5-16mm 2, ST6 and ST25 Datasheet Ring Lug Terminal Blocks ST5, ST5-16mm 2, ST6 and ST25 Weidmuller s comprehensive range of bolt-type screw terminals offers secure connections for all power transmission applications. Bolt-type

More information

Datasheet WMF 2.5 Terminal Series NEW. Phone: Fax: Web: -

Datasheet WMF 2.5 Terminal Series NEW. Phone: Fax: Web:  - Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and

More information

Multi-pole terminal strips

Multi-pole terminal strips Contents for direct mounting Screw connection.2 Screw connection ATEX approval.6.1 for direct mounting Screw connection MK 2/12 2.5 MK 3/2...12 2.5 Width/Height/ø mounting hole Length / mounting dimensions

More information

Bolt connection terminal blocks OTTA, UHV, HV. General information

Bolt connection terminal blocks OTTA, UHV, HV. General information OTTA, UHV, HV Bolt connection terminal blocks General information In traffic guidance, above all in the area of battery distribution, terminal blocks are frequently used to connect ring cable lugs. This

More information

PIT 2,5-TG. Extract from the online catalog. Order No.:

PIT 2,5-TG. Extract from the online catalog. Order No.: Extract from the online catalog PIT 2,5-TG Order No.: 3210185 Disconnect terminal block, Connection type: Leg spring connection, Cross section: - 4 mm², AWG: 26-12, Nominal current: 20 A, Nominal voltage:

More information

MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG AWG AWG Rated surge voltage / pollution severity

MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG AWG AWG Rated surge voltage / pollution severity or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping

More information

Datasheet. W-series terminal with clamping yoke connection WDU 4

Datasheet. W-series terminal with clamping yoke connection WDU 4 The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality

More information

Main catalogue. SNK Series Terminal Blocks Accessories Marking Solutions

Main catalogue. SNK Series Terminal Blocks Accessories Marking Solutions Main catalogue SNK Series Terminal Blocks Accessories Marking Solutions Summary See page 7 1SNK161026S0201 SNK Series, Terminal Blocks Screw clamp terminal blocks Accessories Marking solutions 1 A Smart

More information

Clearwater Tech - Phone: Fax: Web: -

Clearwater Tech - Phone: Fax: Web:  - Accessories Bus cables PROFIBUS-PA cables Straight version PROFIBUS-PA Ex i cables Straight version TM-I marker sleeve TM-I marker sleeve Designation Type Order No. Industrial zone PROFIBUS-PA cable One

More information

Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35

Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 General ordering data Order No. 1608570000 Part designation 2.5/4AN Version EAN 4008190077136 Qty. 100 pc(s). Feed-through terminal,, Tension clamp connection, Wemid, Product notes Product description

More information

Cam switches, Indication, Pushbuttons

Cam switches, Indication, Pushbuttons Cam switches, Indication, Pushbuttons Feed-through terminals Feed-through connection terminals 2.5mm Current 26 amps - 750V / 24 amps - 800V 34 amps - 750V / 32 amps - 800V Width / Strip Length / Screw

More information

PT 2,5-QUATTRO-PE. Extract from the online catalog. Order No.:

PT 2,5-QUATTRO-PE. Extract from the online catalog. Order No.: Extract from the online catalog PT 2,5-QUATTRO-PE Order No.: 3209594 Ground modular terminal block, Connection method: Push-in connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm, Color: green-yellow,

More information

Accessories (additional charge):

Accessories (additional charge): CombiNorm-Classic The 5-width enclosure programme for your 35 mm rail unit can be adapted to suit your own specific requirements by means of 4 different terminal types (= PCB variants) which, in some cases,

More information

Rittal RiLine60. The fascinating 60 mm system of the future assembly-friendly, time-saving, individual and modular. including.

Rittal RiLine60. The fascinating 60 mm system of the future assembly-friendly, time-saving, individual and modular. including. Rittal RiLine60 including innovations 2007 The fascinating 60 system of the future assembly-friendly, time-saving, individual and modular R Rittal RiLine60 perfection in a 60 system Time-saving assembly,

More information

Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals

Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals Terminal Blocks 2013 Product Catalog Terminal Block Supplement Introduction 8WH6 ipo Plug-In Terminals 8WH6 ipo Installation Terminals 8WH2 Spring-Loaded Terminals 1 2 3 4 8WH 8WH5 Combination Plug-In

More information

INNOZED D0 fuse-bases with touch protection

INNOZED D0 fuse-bases with touch protection D0 fusebases with touch protection D0 fusebases with touch protection FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC D0 & D FUSE BASES FEATURES & BENEFITS is a fuse base for D0 fuselinks, sizes D0 and D02.

More information

Unimate Range Pitch 5.08

Unimate Range Pitch 5.08 itch 5.08 in headers Socket connectors CB connection Solder connection SLA 90 250 V / 17.5 A SLA 180 250 V / 17.5 A.2.3 Cable connection Clamping yoke connection TO clamp connection BLA 250 V / 17,5 A

More information

PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:

PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.: Extract from the online catalog PT 2,5-TWIN/1P BU Order No.: 3209646 Feed-through modular terminal block, Connection method: Pushin / plug connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm,

More information

PT 2,5-QUATTRO/2P BU. Extract from the online catalog. Order No.:

PT 2,5-QUATTRO/2P BU. Extract from the online catalog. Order No.: Extract from the online catalog PT 2,5-QUATTRO/2P BU Order No.: 3209675 Feed-through modular terminal block, Connection method: Pushin / plug connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm,

More information

8WH6 ipo Plug-In Terminals

8WH6 ipo Plug-In Terminals / Introduction /3 /4 8WH6 through-type terminals /8 8WH6 fuse terminals /9 8WH6 isolating blade terminals /11 8WH6 isolating terminals /13 8WH6 two-tier terminals More technical product information: Service&Support

More information

Redundancy unit CP-C.1-A-RU Accessory for CP-C.1 range power supplies

Redundancy unit CP-C.1-A-RU Accessory for CP-C.1 range power supplies Data sheet Redundancy unit -A-RU Accessory for range power supplies ABB s redundancy units are used to establish true redundancy which increases the availability of electrical systems significantly. 2CDC

More information

Viking 3 - Screw connection Disconnect terminal blocks

Viking 3 - Screw connection Disconnect terminal blocks 87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...

More information

Position Switches Series 8074/2

Position Switches Series 8074/2 www.stahl.de > Ex e metal enclosure > Operating temperature range -40 C... +70 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 > Extensive assortment of actuators,

More information

AF40... AF96 3-pole contactors Technical data

AF40... AF96 3-pole contactors Technical data Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional

More information

Circuit Breakers. DIN rail-mounted equipment protection

Circuit Breakers. DIN rail-mounted equipment protection Phoenix Contact offers a full family of modular components covering virtually all of your industrial electrical and electronic needs as well as a broad range of value-added services. CLIPLINE DIN rail-mount

More information

Content Modular terminals for high-temperature applications Nuclear power terminal blocks erminal Blocks T D.1

Content Modular terminals for high-temperature applications Nuclear power terminal blocks erminal Blocks T D.1 Content Modular terminals for high-temperature applications TS 32 / Ceramic.2 -.3 Nuclear power terminal blocks Overview.4 -.5.6 -.10 Terminal Blocks.1 Modular terminals for high-temperature applications

More information

RiLine mm system technology for the global market

RiLine mm system technology for the global market 60 system technology for the global market 02 RiLine60 Busbar systems 3 and 4 pole Support + bars + contact hazard protection Flat copper bar system, see 276 in HB 33 PLS busbar system, see 278 in HB 33

More information

General Purpose Relays Accessories. Accessories Miniature Relay PT

General Purpose Relays Accessories. Accessories Miniature Relay PT Miniature Relay PT n Easy replacement of relays on a densely packed DIN rail n No reduction of protection class or creepage/clearance with plastic retainer n Plug-in indicator- and protection modules n

More information

Electronic Circuit Breaker ESS20

Electronic Circuit Breaker ESS20 Electronic Circuit Breaker ESS20 Description Electronic circuit breaker type ESS20 is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 24 V switch-mode

More information

Datasheet AC Outlet DIN-Rail Mountable Receptacles

Datasheet AC Outlet DIN-Rail Mountable Receptacles Datasheet AC Outlet DIN-Rail Mountable Receptacles DIN-rail receptacles, 5A, 15A and 20A power outlets, provide a convenient power source for portable computers or test devices for in-the-panel troubleshooting.

More information

MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG Rated surge voltage / pollution severity AWG 24..

MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG Rated surge voltage / pollution severity AWG 24.. or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping

More information

BETA Switching Switches and Light Indicators

BETA Switching Switches and Light Indicators Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET

More information

SIRIUS 3RU2 Thermal Overload Relays

SIRIUS 3RU2 Thermal Overload Relays Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors. The overload relay can be connected directly to

More information

SHIELD-CONNECTION CLIPS SAB

SHIELD-CONNECTION CLIPS SAB SHIELD-CONNECTION CLIPS SAB PRODUCT INFORMATION CONTA-ELECTRONICS Shield-connection clips SAB Overview of the product line Description of the SABK shield-connection bracket system 3 Shield-connection bracket

More information

Extra functions. Phone: Fax: Web: Accessories P-Series. Terminals, P-Series

Extra functions. Phone: Fax: Web: Accessories P-Series. Terminals, P-Series Accessories P-Series Terminals, P-Series Extra functions B Introduction The accessories for our other ranges of modular terminals can also be used with the P-Series in order to reduce the number of variations.

More information

Datasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX

Datasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange

More information

PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:

PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.: Extract from the online catalog PT 2,5-TWIN/1P BU Order No.: 3209646 Feed-through terminal block, Connection method: Push-in / plug connection, Cross section: 0.14 mm² - 4 mm², AWG: 26-12, Width: 5.2 mm,

More information

- 1 - General ordering data Order No

- 1 - General ordering data Order No General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,

More information

Load and Motor Switches, Load-Break Switches Series 8549

Load and Motor Switches, Load-Break Switches Series 8549 www.stahl.de > Innovative switch concept > State-of-the-art contact arrangement > Easy and clear connection technology > Wiring channel for auxiliary contacts > Retrofittable: Pick-off terminal block Auxiliary

More information

USA Canada On the Internet: Toll Free wieland Product Range Electrical Connections

USA Canada On the Internet: Toll Free wieland Product Range Electrical Connections 0.2 F 01/02 270 Excerpt from our master catalogue wiecon PCB terminals In Ageneral, all Wieland components which are obliged to have the identification are provided with the A mark Pluggable PCB terminals

More information

SL-SMT Pitch 3.81 NEW. Data Sheet PCB Products. PCB Connectors SL-SMT 3.81/SL 3.81 BL 3.81

SL-SMT Pitch 3.81 NEW. Data Sheet PCB Products. PCB Connectors SL-SMT 3.81/SL 3.81 BL 3.81 NEW SL-SMT itch 3.81 Data Sheet CB roducts CB Connectors SL-SMT 3.81/SL 3.81 BL 3.81 The 3.81 mm (0.51 inch) pitch connector system extends the selection of connectors available to the designer in the

More information

CSF - CSM CONNECTORS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green

CSF - CSM CONNECTORS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green - CSM Functional characteristics Dimensional class: low 0 RoHS 2011/65/EU Standard colour: green Dimensions: 14 x 11.5 mm (.551 x.453 in) 10 20 30 mm ½ 1 in Max approved wire size: solid: 2.5 mm 2 (IMQ);

More information

HK-003,HC SERIES HK-003 HCSERIES. Modular Heavy-current connector WAIN 12-01

HK-003,HC SERIES HK-003 HCSERIES. Modular Heavy-current connector WAIN 12-01 HK-00, SERIES HK-00 SERIES Modular Heavy-current connector 12-01 HK-00/0HK-00/2 Heavy-current inserts HE-006 HK-00 Technical characteristics Specifications Approvals Inserts Number of contacts Electrical

More information

SERIES Z/T236. Safety-Rated, Positive-Break Miniature DIN Limit Switches. Features & Benefits. Description. Typical Applications ORDERING GUIDE

SERIES Z/T236. Safety-Rated, Positive-Break Miniature DIN Limit Switches. Features & Benefits. Description. Typical Applications ORDERING GUIDE SERIES Z/T23 Safety-Rated, Positive-Break Miniature DIN Limit Switches Features & Benefits Positive-Break NC contacts won t stick or weld shut. Watertight design meets IP washdown requirements. Rugged,

More information

DIN rail enclosures. Combirail Alurail CombiNorm-Connect CombiNorm-Compact CombiNorm-Classic

DIN rail enclosures. Combirail Alurail CombiNorm-Connect CombiNorm-Compact CombiNorm-Classic DIN rail enclosures Combirail Alurail CombiNorm-Connect CombiNorm-Compact CombiNorm-Classic BOPLA: Innovative, capable and reliable For more than 40 years Bopla has been supporting customers in a wide

More information

Thermal Overload Relays - WEG RW Series, 2 Pole

Thermal Overload Relays - WEG RW Series, 2 Pole International (5) 4-07 The RW Class Thermal Overload Relays, with their extended operational service lives, are designed for use with the CWC miniature and CWM standard contactors. These relays can be

More information

MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories

MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories Page 1 of 5 MS132-10 ABB contact for United States of America General Information Extended Product Type: Product ID: EAN: Catalog Description: Long Description: MS132-10 1SAM350000R1010 4013614400100 MS132-10

More information

HS1C Interlock Switches with Solenoid

HS1C Interlock Switches with Solenoid HSC es with The guard door remains locked until the machine stops completely. With the actuator mounted on the guard door and the interlock switch on the machine, the door is mechanically locked when closed.

More information

Power distribution systems - accessories

Power distribution systems - accessories Connections and terminals Line terminal X 221 3 01 Power-D-Box with sockets pre-wired Line terminal (max. 63 A) X 221 3 01 14.551 max. tightening torque 3.0 Nm 15.591 busbar X1, X2 blade terminals 6.3

More information

DIN Track Terminal Blocks with Screw Terminals

DIN Track Terminal Blocks with Screw Terminals New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes with a nominal

More information

DIN Track Terminal Blocks with Screw Terminals XW5T

DIN Track Terminal Blocks with Screw Terminals XW5T New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes with a nominal

More information

MS General Information Extended Product Type: MS

MS General Information Extended Product Type: MS MS132-1.6 General Information Extended Product Type: MS132-1.6 Product ID: 1SAM350000R1006 EAN: 4013614400063 Catalog Description: MS132-1.6 Manual Motor Starter Long Description: The MS132-1.6 manual

More information

Protection Equipment. 5/2 Introduction

Protection Equipment. 5/2 Introduction Protection Equipment /2 Introduction SIRIUS 3RV2 Motor Starter Protectors/ Circuit Breakers up to 40 A /6 General data /12 For motor protection /14 For motor protection with overload relay function /1

More information

Terminal blocks with Push In connection technology. Product Information

Terminal blocks with Push In connection technology. Product Information Terminal blocks with Push In connection technology Product Information Overview Terminal blocks with Push In connection technology (P-Series) Less is more With the P-Series, Weidmuller is presenting a

More information

Data sheet TERMSERIES TRZ 120VUC 1CO

Data sheet TERMSERIES TRZ 120VUC 1CO relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: With screw and tension-clamp connection AgNi contact, optionally with hard gold-plated

More information

Accessories (additional charge):

Accessories (additional charge): Alurail With Alurail, BOPLA has developed a modular DIN rail enclosure which is especially suitable for use in measurement, control and automatic control technology. Basic profiles, each in eight standard

More information

INNOZED D0 fuse-bases with touch protection

INNOZED D0 fuse-bases with touch protection INNOZED D0 fusebases with touch protection INNOZED D0 fusebases with touch protection FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC D0 & D FUSE BASES FEATURES & BENEFITS INNOZED is a fuse base for D0 fuselinks,

More information

Han Q 1/0 Axial Screw Protected. Available February 2017

Han Q 1/0 Axial Screw Protected. Available February 2017 Features Compact connector based on size 3 A with a current carrying capacity of 100 A Space saving design due to an angled malemale version IP20 protected male and female contact according to IEC 60 529

More information

Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series

Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series 28 Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series 281... Blown fuse indication Exchange of fuse Blown fuse indication by LED or neon lamp Before exchanging the

More information

Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.

Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series

More information

General technical data: CONTACTOR, AC-3, 4KW/400V, 2NO+2NC, DC 24V, 3-POLE, SZ S0 SCREW TERMINAL REMOVABLE AUX. SWITCH. product brand name

General technical data: CONTACTOR, AC-3, 4KW/400V, 2NO+2NC, DC 24V, 3-POLE, SZ S0 SCREW TERMINAL REMOVABLE AUX. SWITCH. product brand name Data sheet CONTACTOR, AC-3, 4KW/400V, 2NO+2NC, DC 24V, 3-POLE, SZ S0 SCREW TERMINAL REMOVABLE AUX. SWITCH product brand name Product designation SIRIUS 3RT2 contactor General technical data: Size of contactor

More information

fasis WTP DIN rail terminal blocks with push-in connection

fasis WTP DIN rail terminal blocks with push-in connection 110 fasis fasis WTP DIN rail terminal blocks with push-in connection Terminate wires easily, directly and without tools! fasis WTP DIN rail terminal blocks with push-in connection. Built according to an

More information

Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage

Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution

More information

Stud terminals. Overview Stud terminals WF / WFF. Stud terminals

Stud terminals. Overview Stud terminals WF / WFF. Stud terminals Overview WF / WFF Power transmission Weidmüller s extensive range of stud terminals offers secure connections for all applications which entail a transmission of energy. The connection range extends from

More information

W-series W-series W-series sets standards! W-series offers advantages 1) Easy project planning 3) Time-saving potential distribution

W-series W-series W-series sets standards! W-series offers advantages 1) Easy project planning 3) Time-saving potential distribution 2 -series -series -series -series sets standards! hen it comes to functional perfection even in details, eidmüller s -series defines the market standards for many years now! The -series comprises producte

More information

Snap-in covers I Voltage taps

Snap-in covers I Voltage taps ACCESSORIES Accessories for analogue instruments, current transformers, switchboards, voltage taps for busbars and round conductors. Snap-in covers I Voltage taps Voltage taps page 10/1 10 For analogue

More information